Trailing-Edge
-
PDP-10 Archives
-
ap-c796e-sb
-
lnkerr.mac
There are 38 other files named lnkerr.mac in the archive. Click here to see a list.
TITLE LNKERR - LINK EXTENDED ERROR MESSAGE SEGMENT
SUBTTL D.M.NIXON/DMN/JLd/SRM/JBC/JNG 27-Feb-78
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1973, 1978 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
ENTRY LNKERR
SEARCH LNKPAR,LNKLOW,MACTEN,UUOSYM,SCNMAC
EXTERN LNKLOG,TTYCHK
CUSTVR==0 ;CUSTOMER VERSION
DECVER==4 ;DEC VERSION
DECMVR==0 ;DEC MINOR VERSION
DECEVR==765 ;DEC EDIT VERSION
VERSION
SALL
SEGMENT
SUBTTL REVISION HISTORY
;START OF VERSION 1A
;41 ADD LNKFSI MESSAGE
;46 ADD KLUDGE FEATURE MESSAGE
;71 ADD LNKXIT INFO MESSAGES
;102 ADD NO END BLOCK MESSAGE
;105 ADD ITT MESSAGE (FOR BLOCK TYPE 12)
;107 REPLACE KLUDGE BY MIXFOR
;START OF VERSION 2
;135 ADD OVERLAY FACILITY
;162 ADD ISN MESSAGE
;215 ADD OVERLAY ERROR MESSAGES
;START OF VERSION 2B
;237 (13931) CHANGE RPR ERROR TO NBR
;245 ADD WRONG DEVICE FOR OVERLAY FILE ERROR MESSAGE
;253 Add invalid ASCII text block error (ITB)
;262 Add /LINK switch missing error message (LSM)
;275 ADD SIMULA ERROR MESSAGE
;351 LABEL EDIT 237
;377 Add "Attempt to set relocation counter below origin" (SRB) msg
;404 Re-insert edit 316 (support of the ELN message).
;414 Add the FSN message.
;424 Improve the FSN message.
;START OF VERSION 2C
;442 Add the EOI and EOO messages.
;464 Add the IMM message.
;471 Add messages associated with ALGOL debugging system.
;474 Print the module name on F40 fatal errors.
;531 Add UNS message.
;544 SOUP in LINK version 3 stuff for TOPS-20.
;557 Clean up listing for release.
;START OF VERSION 3
;446 CHANGE SOME OF THE ERROR MESSAGES
;START OF VERSION 3A
;560 Release on both TOPS-10 and TOPS-20 as LINK version 3A(560)
;START OF VERSION 4
;564 Make LINK assemble with MACRO 52.
;611 Support COBOL-74
;624 Add a long message for ?LNKKIA.
;635 Add the %LNKTMA and ?LNKABT messages.
;650 Add the ?LNKPUF message.
;661 Make %LNKMDS be L%W.
;673 Replace all of the messages with the updated versions from
; the new (reviewed) LINK manual.
;731 SEARCH MACTEN,UUOSYM
;765 Release on both TOPS-10 and TOPS-20 as LINK version 4(765)
SUBTTL FIND MESSAGE
LNKERR: JFCL .+1 ;INCASE CCL ENTRY
IFE FTSINGLE,<
HRRZ T1,SEGBLK+1 ;GET SEGMENT NAME
CAIE T1,'ERR' ;IF MULTI-SEGMENTED
JRST ERROK ;NO
MOVE T1,[SAVEAC+P2,,P2]
BLT T1,16 ;RESTORE ALL ACCS
MOVE P1,SAVEAC+T1 ;P1 IS STORED TWICE
ERROK:>;END IFE FTSINGLE
MOVE T2,ERRCOD ;GET ASCII ERROR CODE
TRZ T2,<BYTE (7) 0,0,0,177,177 (1) 1>
SETZ T4, ;PUT SIXBIT IN HERE
SETZ T1, ;CLEAR JUNK
LSHC T1,7 ;GET A CHAR
SUBI T1," " ;SIXBITIZE
LSH T4,6 ;MAKE SPACE
ADDI T4,(T1) ;ADD INTO WHATS THERE
JUMPN T2,.-5 ;LOOP FOR ALL (3) CHARS
;WE NOW USE T4 AS THE HASH TOTAL (18 BITS)
MOVE T1,T4 ;GET 18 BITS
IDIVI T1,E.PRM ;INITIAL HASH
JUMPE T1,[AOJA T1,ERRHS1] ;MAKE SURE T1 NOT ZERO
CAIGE T1,E.PRM ;IF QUOTIENT LARGER THAN PRIME
JRST ERRHS1 ;NO
SUBI T1,E.PRM ;STEP DOWN
JRST .-4 ;TRY AGAIN
ERRHS0: ADD T2,T1 ;STILL IN TABLE
CAIL T2,E.PRM ;STILL IN TABLE
SUBI T2,E.PRM ;NO,
ERRHS1: MOVS T3,HSHTAB(T2) ;PROBE TABLE
CAIN T4,(T3) ;MATCH
JRST ERRFND ;YES
JUMPE T3,ERRFAI ;FAILED IF ZERO, NOT IN TABLE
JRST ERRHS0 ;TRY AGAIN
ERRIDX: HRRZ T1,ERRCOD ;GET NUMBER
ANDI T1,<BYTE (7) 0,0,0,177,177 (1) 1>
TRNE T1,<BYTE (7) 0,0,0,100> ;PROPAGATE SIGN
IOR T1,[BYTE (7) 177,177,177]
HLRE T2,@(T3) ;GET FIRST
HRRE T4,@(T3) ;AND LAST
CAML T1,T2 ;RANGE CHECK
CAMLE T1,T4
JRST .RPOPJ ;NOT IN RANGE?
SUB T1,T2 ;ADJUST OFFSET OF TABLE
ADD T1,(T3) ;PLUS BASE ADDRESS
HRRZ T1,1(T1) ;GET ADDRESS OF MESSAGE
JRST ERRFN0
;HERE WHEN THE HASH SEARCH IS SUCCESSFUL. PRINT THE MESSAGE(S).
ERRFND: MOVS T3,T3 ;ADDRESS IN RIGHT AGAIN
SKIPGE (T3) ;INDEXED VAI TABLE?
JRST ERRIDX ;YES
HRRZ T1,T3 ;GET MESSAGE POINTER
ERRFN0: PUSH P,T1 ;SAVE T1
OUTVIA .TCRLF## ;START NEW LINE
SKIPA T1,0(P) ;RELOAD T1
ERRFN1: PUSH P,T1 ;SAVE IT
ADDI T1,1 ;POINT TO MESSAGE
OUTVIA .TSTRG## ;OUTPUT MESSAGE
POP P,T1 ;GET BACK POINTER
SKIPN T1,(T1) ;MORE TO DO?
JRST ERRFAI ;NO
SKIPN 1(T1) ;BUT IS IT A REAL MESSAGE?
JRST ERRFN1 ;NO, JUST TRANSFER
JRST ERRFN0 ;YES, NEED A CRLF ALSO
ERRFAI: JRST ER.FIN## ;FINISH OFF MESSAGE
.RPOPJ:: ;HERE TO RETURN CPOPJ
MOVE T1,UUOTRAP ;GET PC WORD
TXZ T1,PC.LIP ;TURN OF LAST INST PUBLIC INCASE EXECUTE ONLY
IFE FTSINGLE,<
HRRZ T2,SEGBLK+1 ;GET THIS SEGMENT NAME
CAIE T2,'ERR' ;IF MULTI-SEGMENTED
>
JRSTF @T1 ;NO
IFE FTSINGLE,<
PUSH P,T1 ;STORE RETURN ADDRESS
JRST @LSTSEG ;AND RETURN VIA PREV SEGMENT
>
SUBTTL HASH MACROS
IF1,< ;ALL ON PASS 1
DEFINE GETSYM (N)<$ER'N==0>
N==0
XLIST
REPEAT E.PRM,<
GETSYM \N
N==N+1
>
DEFINE HASH (CODE,GOTO,TEXT)<
%ER'CODE:
IFIDN <GOTO><@>,<
1B0+CODE'TAB>
IFDIF <GOTO><@>,<
GOTO>
ASCIZ \TEXT\
SXB=(<SIXBIT /CODE/>)
Q=SXB/E.PRM
R=SXB-Q*E.PRM
IFGE Q-E.PRM,<Q=Q-Q/E.PRM*E.PRM>
IFE Q,<Q=1>
TRY=1
ITEM Q,\R,CODE
IFL E.PRM-TRY,<PRINTX HASH FAILURE>
>
DEFINE ITEM (QT,RM,CD)<
IFN $ER'RM,<
R=R+QT
IFL E.PRM-R,<R=R-R/E.PRM*E.PRM>
IFGE E.PRM-<TRY=TRY+1>,<ITEM Q,\R,CD>
>
IFE $ER'RM,<
$ER'RM=SXB,,%ER'CD
>>>
IF2,<
DEFINE HASH (CODE,GOTO,TEXT)<
%ER'CODE:
PURGE %ER'CODE
IFIDN <GOTO><@>,<
1B0+CODE'TAB>
IFDIF <GOTO><@>,<
GOTO>
XLIST
ASCIZ \TEXT\
LIST
>>
DEFINE TABLE (CODE,N)<
EXP CODE'N
>
DEFINE VIATBL (CODE,FIRST,LAST)<
CODE'TAB: <FIRST&777777>,,<LAST&777777>
N=FIRST
REPEAT LAST-FIRST,<
M=N&777
TABLE CODE,\M
N=N+1
>>
DEFINE INDEX (CODE,IDX,GOTO,TEXT)<
IRP CODE,<
N=IDX&777
LABEL CODE,\N
>
EXP GOTO
XLIST
ASCIZ \TEXT\
LIST
>
DEFINE LABEL (CODE,NUMBER)<
CODE'NUMBER:
>
SUBTTL HASH TABLE
HSHTAB:
IF1,< BLOCK E.PRM> ;ALLOCATE SPACE ON PASS 1
IF2,<
DEFINE GETSYM (N)<
$ER'N
>
N==0
SALL
REPEAT E.PRM,<
GETSYM \N
N==N+1
>
DEFINE PRGSYM (N)<
PURGE $ER'N
>
N==0
REPEAT E.PRM,<
PRGSYM \N
N==N+1
>
PURGE N,SXB,Q,R,TRY
>
SUBTTL INDIRECT TABLES
VIATBL (FEE,-1,32)
VIATBL (FLE,0,32)
VIATBL (FRE,0,32)
VIATBL (GSE,0,32)
.HWFRMT ;SAVE SPACE
COMMENT \
SHORT LEVEL MESSAGE
THESE ARE INCORE AT ALL TIMES (IN OTHER SEGMENTS)
CODE LVL SEV MESSAGE
ABT 31 31 Load aborted due to %LNKTMA errors, max. /ARSIZE
needed was [decimal]
AMP 8 8 ALGOL main program not loaded
ANC 31 31 Address not in core
ARL 8 8 Ambiguous request in link [decimal] for [symbol]
defined in links [decimal]
AZW 31 31 Allocating zero words
B4R 8 8 Bad F40 produced .REL file for [name]
CEF 31 31 Core expansion failed
CLF 1 1 Closing LOG file, continuing on [file]
CMC 31 31 Cannot mix COBOL-68 and COBOL-74 compiled code
Error detected in module [module] from [file]
CMF 31 31 COBOL module must be loaded first
CNW 31 31 Code not yet written at [label]
CSF 1 1 Creating saved file
DEB * 1 [name] execution
DLT * 1 Execution deleted
DNA 31 31 DDT not available
DNS 8 8 Device not specified for /[switch]
DRC 8 8 Decreasing relocation counter [symbol] from
[octal] to [octal]
DSC 31 31 Data store to COMMON [symbol] not in link number
[decimal] for [module] in [file]
DSL 31 31 Data store to location [octal] not in link
number [decimal] for [module] in [file]
DSO 31 31 Data statement overflow in module [name]
DUZ 31 31 Decreasing undefined symbol count below zero
EAS 31 31 Error creating overflow file for area AS
ECE 31 31 Error creating .EXE file
EHC 31 31 Error creating overflow file for area HC
EID 31 31 Error on input device status [status] for [file]
ELC 31 31 Error creating overflow file for area LC
ELF 1 1 End of LOG file
ELN 7 1 End of link number [number], name [name]
ELS 31 31 Error creating overflow file for area LS
EMS 1 1 End of MAP segment
EOE 31 31 .EXE file output error
EOI 31 31 Error on input status [status] for [file]
EOO 31 31 Error on output status [status] for [file]
EOV 31 31 Error creating overlay file for [file]
ESN 31 31 Extended symbol not expected
EXP 4 1 Expanding low segment to [decimal]P
EXS 1 1 EXIT segment
FCD 31 31 FORTRAN confused about data statements in module
[name]
FCF 1 1 Final code fixups
FEE 31 31 (Indexed file LOOKUP, ENTER, or RENAME error)
FIN 1 1 LINK finished
FLE 31 31 (Indexed file LOOKUP, ENTER, or RENAME error)
FOV 31 31 Cannot overlay F40 compiled code in [module]
FRE 31 31 (Indexed file LOOKUP, ENTER, or RENAME error)
FSF 8 8 FORTRAN subroutine [name] not in expected form,
MIXFOR fixup not done
FSI 8 8 FORTRAN requires FOROTS, /FORSE switch ignored
FSN 31 31 FUNCT. subroutine not loaded
GSE 31 31 (Indexed file LOOKUP, ENTER, or RENAME error)
HSL 31 31 Attempt to set high segment origin too low
HTL 31 31 Symbol hash table too large
IAS 31 31 Error inputting area AS
I4D 31 31 Illegal F40 DATA code [octal] in module [name]
I4S 31 31 Illegal F40 sub-block [octal] in module [name]
I4T 31 31 Illegal F40 table entry [octal] in module [name]
IBC 31 31 Attempt to increase size of blank COMMON from
[decimal] to [decimal]
ICI 31 31 Insufficient core to initialize LINK
IDM 31 31 Illegal data mode for device
IFD 31 31 INIT failure for device [device]
IHC 31 31 Error inputting area HC
ILC 31 31 Error inputting area LC
ILS 31 31 Error inputting area LS
IMA 8 8 Incremental maps not yet available
IMM * 1 [number] included modules missing (from file
[file])
INS 31 31 I/O data block not set up
IOV 31 31 Input error for overlay file
IPO 31 31 Invalid Polish operator [octal]
IPX 31 31 Invalid PSECT index
IRB 31 31 Illegal REL Block Type [octal] for [module] in
[file]
ISD 8 8 Inconsistent symbol definition for [symbol]
ISN 31 31 Illegal symbol name
ISO 31 31 Invalid store operator [octal]
ISP 31 31 Incorrect symbol pointer
ISS 8 8 Insufficient space for symbol table (after PSECT
[name])--table truncated
IST 31 31 Inconsistency in switch table
ITT 8 8 Illegal type 12 link number [octal] in module
[name]
IUU * 31 Illegal user UUO at PC [octal]
IVC 31 31 Index validation check failed at [address]
KIA 31 31 Cannot mix KI10 and KA10 compiled code
LDS 1 1 LOAD segment
LFC 1 1 LOG file continuation
LFI 1 1 LOG file initilaization
LII 8 1 Library index inconsistent, continuing
LIM 1 1 LINK initialization
LMN 6 1 Loading module [module]
LNA 8 8 Link name [name] already assigned to link number
[decimal]
LNC 31 31 Link number [decimal] not in core
LNL 8 8 Link number [decimal] not loaded
LNN 8 8 Link name [name] not assigned
LSM 8 8 /LINK switch missing while loading link number
[decimal] -- /LINK assumed
LSS * 1 Library Search Symbols (Entry points)
MDS 31 8 Multiply-Defined Global symbol [symbol] in
module [name] defined value = [octal], this
value = [octal]
MOV 1 1 Moving low segment to expand area [area]
MPS 1 1 MAP segment
MRN 1 1 Multiple regions not yet implemented
MSN 8 8 MAP sorting not yet implemented
MSR 31 31 /MIXFOR switch required to mix F40 and FORTRAN
code
MSS 8 8 MAXCOR set too small, increasing to [decimal]P
MTB 8 8 MAXCOR too big, [decimal]P used
MTS 8 8 MAXCOR too small, at least [decimal]P is
required
NBR 31 31 Attempt to position to node before root
NCL 8 8 Not enough core to load job, saved as [file]
NCX 8 1 Not enough core to load and execute job, will
run from [file]
NEB 8 8 No end block seen for [module]
NED 31 24 Non-existent device
NSA * 1 No start address
OAS 31 31 Error outputting area AS
ODV 31 31 Overlay file must be created on a file structure
OEL 8 8 Output error on LOG file, file closed, job
continuing
OEM 8 8 Output error on MAP file, file closed, job
continuing
OES 8 8 Output error on symbol file, file closed, job
continuing
OEX 8 8 Output error on XPN file, file closed, job
continuing
OFN 31 31 Old FORTRAN (F40) module not available
OHC 31 31 Error outputting area HC
OHN 31 31 Overlay handler not loaded
OLC 31 31 Error outputting area LC
OLS 31 31 Error outputting area LS
OMB 31 31 /OVERLAY switch must be first
ONS 8 1 Overlays not supported in this version of LINK
OOV 31 31 Output error for overlay file status [status]
for [file]
OS2 1 1 Overlay segment phase 2
PAS 1 1 Area AS overflowing to DSK
PBI 8 8 Program break [octal] invalid in [name]
PEF 31 8 Premature end of file in [file]
PHC 1 1 Area HC overflowing to DSK
PLC 1 1 Area LC overflowing to DSK
PLS 1 1 Area LS overflowing to DSK
POO 8 8 PSECT overlay occurred--[name],[name]
PSF 31 31 Polish symbol fixups not yet implemented
PUF 31 31 PAGE. UUO failed, error code was [octal]
RBS 31 31 REL Block Type [octal] too short for [file]
RCU 31 31 Relocation counter [symbol] undefined, set to
[symbol]
RED 1 1 Reducing low segment to [decimal]P
RER * 1 Request External References (Inter-Link Entry
Points)
RGS 1 1 Rehashing Global symbol table from [decimal] to
[decimal]
RLC * 1 Reloc ctr. initial value current value [octal]
RUC 31 31 Returning unavailable core
SFU 8 8 Symbol table fouled up
SIF 31 31 Symbol insert failure, non-zero hole found
SLS 8 8 Symbols must be in low segment
SMP 8 8 SIMULA main program not loaded
SNC 31 31 Symbol [symbol] already defined, but not as
COMMON
SNL 1 1 Scanning new command line
SNP 8 8 Subroutine [symbol] in link number [decimal] not
on path for call from link number [decimal]
SOE 31 31 Saved file output error - status [status]
SRB 8 8 Attempt to set relocation counter [name] below
initial value of [octal]
SSN 8 8 Symbol table sorting not yet implemented
SST 1 1 Sorting symbol table
STC 1 1 Symbol table completed
T13 31 31 LVAR (type 13) code not implemented
TDS 8 8 Too late to delete initial symbols
TEC 31 31 Trying to expand COMMON [symbol] from [decimal]
to [decimal] in module [name]
TMA 31 8 Too many ambiguous requests in link [number],
use /ARSIZE:[decimal]
TTF 8 8 Too many titles found
UAR 8 8 Undefined assign for [symbol] in [file]
UGS * 1 Undefined global symbols
UNS 31 31 Universal files not supported loading [file]
URC 31 1 Unknown Radix-50 symbol code
USA 8 8 Undefined start address [symbol]
USC 31 8 Undefined subroutine [name] called from link
number [decimal]
VAL * 1 [symbol] [value] [type]
XCT * 1 [name] Execution
ZSV 8 8 Zero switch value illegal
END OF COMMENT \
SUBTTL LONG MESSAGES
HASH ABT,0,<
You loaded programs containing more ambiguous subroutine
requests than can fit in the tables of one or more overlay
links. You received a LNKARL message for each ambiguous
request, and a LNKTMA message for each link with too many
requests. You can solve this problem in either of two
ways. One is to use the /ARSIZE switch before the
/OVERLAY switch, thus expanding all the tables. The other
is to use the /ARSIZE switch just before each /LINK switch
to expand the tables separately.>
HASH AMP,0,<
You loaded ALGOL procedures, but no main program. The
missing start address and undefined symbols will terminate
execution.>
HASH ANC,0,<
LINK expected a particular user address to be in memory,
but it is not there. This is an internal LINK error.
This message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.>
HASH ARL,0,<
More than one successor link can satisfy a call from an
ancestor link. The ancestor link requests an entry point
that is contained in two or more of its successors. You
should revise your overlay structure to remove the
ambiguity.
If you execute the current load, one of the following will
occur when the ambiguous call is executed:
1. If only one module satisfying the request is in
memory, that module will be called.
2. If two or more modules satisfying the request are in
memory, the one with the most links of its path in
memory will be called.
3. If no modules satisfying the request are in memory,
the one with the most links of its path in memory will
be called.
If a module cannot be selected by the methods 2 or 3
above, one of the modules will be called at random.>
HASH AZW,0,<
LINK's memory manager was called with a request for 0
words. This is an internal LINK error. This message is
not expected to occur. If it does, please notify your
Software Specialist or send a Software Performance Report
(SPR) to DIGITAL.>
HASH B4R,0,<
Either the compiler produced incorrect code or the .REL
file was incorrectly modified. Two possible causes for
the error are: a table is too long (more than 2^18
words); or a table that should have paired words has an
odd length. LNKB4R is usually followed by a fatal error.>
HASH CEF,0,<
LINK cannot expand core further. All permitted overflows
to disk have been tried, but your program is still too
large for available memory. A probable cause is a large
global symbol table, which cannot be overflowed to disk.>
HASH CLF,0,<
You have changed the log file device. The old log file is
closed; further log entries are written in the new log
file.>
HASH CMC,0,<
You cannot use COBOL-68 and COBOL-74 files in the same
load. Compile all COBOL programs with the same compiler
and reload.>
HASH CMF,0,<
You are loading a mixture of COBOL-compiled files and
other files. Load one of the COBOL-compiled files first.>
HASH CNW,0,<
You attempted to use an unimplemented feature. This is an
internal LINK error. This message is not expected to
occur. If it does, please notify your Software Specialist
or send a Software Performance Report (SPR) to DIGITAL.>
HASH CSF,0,<
LINK is generating your .EXE file.>
;(There is no long text for the DEB message.)
;(There is no long text for the DLT message.)
HASH DNA,0,<
A monitor call for SYS:UDDT.EXE failed.>
HASH DNS,0,<
You used a device switch (for example, /REWIND,
/BACKSPACE), but LINK cannot associate a device with the
switch. Neither LINK's default device nor any device you
gave with the /DEFAULT switch can apply. Give the device
with or before the switch (in the same command line).>
HASH DRC,0,<
You are using the /SET switch to reduce the value of an
already defined relocation counter. Unless you know
exactly where each module is loaded, code may be
overwritten.>
HASH DSC,0,<
You loaded a FORTRAN-compiled file with DATA statement
assignments to a COMMON area. The COMMON area is already
defined in an ancestor link.>
HASH DSL,0,<
You have a data store for an absolute location outside the
specified link. Load the module into the root link.
NOTE
If [octal] is less than 140, this message has
level 8 and severity 8.
>
HASH DSO,0,<
Incorrect code has been generated by the F40 compiler.
This message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.>
HASH DUZ,0,<
LINK's undefined symbol count has become negative. This
message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.>
HASH EAS,0,<
LINK could not make the ALGOL symbol table on the disk.
You could be over your disk quota, or the disk could be
full or have errors.>
HASH ECE,0,<
LINK could not write the saved file on the disk. You
could be over your disk quota, or the disk could be full
or have errors.>
HASH EHC,0,<
LINK could not write your high-segment code on the disk.
You could be over your disk quota, or the disk could be
full or have errors.>
IFE TOPS20,<
HASH EID,0,<
A read error has occurred on the input device. Use of the
device is terminated and the file is released. The status
is represented by the right half of the file status word.
Refer to the DECsystem-10 Monitor Calls for the
explanation of the file status bits.>
> ;END IFE TOPS20
IFN TOPS20,<
HASH EID,0,<
A read error has occurred on the input device. Use of the
device is terminated and the file is released.>
> ;END IFN TOPS20
HASH ELC,0,<
LINK could not write your low-segment code on the disk.
You could be over your disk quota, or the disk could be
full or have errors.>
;(There is no long text for the ELF message.)
HASH ELN,0,<
The link is loaded.>
HASH ELS,0,<
LINK could not write your local symbol table on the disk.
You could be over your disk quota, or the disk could be
full or have errors.>
HASH EMS,0,<
The map file is completed and closed.>
HASH EOE,0,<
LINK could not write the saved file on the disk. You
could be over your disk quota, or the disk could be full
or have errors.>
IFE TOPS20,<
HASH EOI,0,<
An error has been detected while reading the named file.
The status is represented by the right half of the file
status word. Refer to the DECsystem-10 Monitor Calls for
the explanation of the file status bits.>
> ;END IFE TOPS20
IFN TOPS20,<
HASH EOI,0,<
An error has been detected while reading the named file.>
> ;END IFN TOPS20
IFE TOPS20,<
HASH EOO,0,<
An error has been detected while writing the named file.
The status is represented by the right half of the file
status word. Refer to the DECsystem-10 Monitor Calls for
the explanation of the file status bits.>
> ;END IFE TOPS20
IFN TOPS20,<
HASH EOO,0,<
An error has been detected while writing the named file.>
> ;END IFN TOPS20
HASH EOV,0,<
LINK cannot write the overlay file on disk. You may be
over your disk quota; the disk may be full; or the disk
may have errors.>
HASH ESN,0,<
Long symbol names (more than six characters) are not
implemented. This message is not expected to occur. If
it does, please notify your Software Specialist or send a
Software Performance Report (SPR) to DIGITAL.>
HASH EXP,0,<
LINK is expanding memory to the specified amount. You can
speed up future loads of this program by using the /CORE
switch to allocate the required core.>
HASH EXS,0,<
LINK is in the last stages of loading your program (for
example, creating .EXE and symbol files, preparing for
execution if requested).>
HASH FCD,0,<
You are loading incorrect F40-compiled code caused by a
source statement of the form
DATA A(I),I=1,4/1,2,3,4/
instead of the form
DATA (A(I),I=1,4)/1,2,3,4/
This message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.>
HASH FCF,0,<
LINK is reading one or both segment overflow files
backwards to perform any needed code fixups. This may
cause considerable disk overhead, but occurs only if your
program is too big for memory.>
HASH FEE,@
HASH FIN,0,<
LINK is finished. Control is passed to the monitor, or to
the loaded program for execution.>
HASH FLE,@
HASH FOV,0,<
You cannot load F40-compiled code in an overlay structure.
Recompile with the FORTRAN compiler.>
HASH FRE,@
HASH FSF,0,<
LINK cannot find a return from this F40-compiled
subroutine.>
HASH FSI,0,<
You gave the /FORSE switch while loading FORTRAN-compiled
code.>
HASH FSN,0,<
During final processing of your root link, LINK found that
the FUNCT. subroutine was not loaded. This would cause an
infinite recursion if your program were executed. The
FUNCT. subroutine is requested by the overlay handler, and
is usually loaded from a default system library. Either
you prevented searching of system libraries, or you did
not load a main program from an overlay-supporting
compiler into the root link.>
HASH GSE,@
IFE TOPS20,<
HASH HSL,0,<
You have set the high-segment counter to a page containing
low-segment code. Reload, using the /SET:.HIGH.:n switch,
or (for MACRO programs) reassemble after changing your
TWOSEG pseudo-op. Note that you cannot set the
high-segment counter below 400000 for a KI10 monitor
before 5.07, or for any KA10 monitor.>
> ;END IFE TOPS20
IFN TOPS20,<
HASH HSL,0,<
You have set the high-segment counter to a page containing
low-segment code. Reload, using the /SET:.HIGH.:n switch,
or (for MACRO programs) reassemble after changing your
TWOSEG pseudo-op.>
> ;END IFN TOPS20
HASH HTL,0,<
Your symbol hash table is larger than the maximum LINK can
generate (about 50P). This table size is an assembly
parameter. This message is not expected to occur. If it
does, please notify your Software Specialist or send a
Software Performance Report (SPR) to DIGITAL.>
HASH IAS,0,<
An error occurred while reading in the ALGOL symbol
table.>
HASH I4D,0,<
Incorrect code has been generated by the F40 compiler.
This message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.>
HASH I4S,0,<
Incorrect code has been generated by the F40 compiler.
This message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.>
HASH I4T,0,<
Incorrect code has been generated by the F40 compiler.
This message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.>
HASH IBC,0,<
A blank COMMON area cannot be expanded once defined.
Either load the module with the largest definition first,
or use the /COMMON switch to reserve the needed space.>
HASH ICI,0,<
LINK needs more memory than is available.>
HASH IDM,0,<
You specified an illegal combination of device and data
mode (for example, terminal and dump mode). Respecify a
legal device.>
HASH IFD,0,<
An OPEN or INIT monitor call for the specified device
failed. The device may be under another user's control.>
HASH IHC,0,<
An error occurred while reading in your high-segment
code.>
HASH ILC,0,<
An error occurred while reading in your low-segment code.>
HASH ILS,0,<
An error occurred while reading in your local symbol
table.>
HASH IMA,0,<
The INCREMENTAL keyword for /MAP is not implemented. The
switch is ignored.>
;(There is no long text for the IMM message.)
HASH INS,0,<
LINK attempted a monitor call (for example, LOOKUP, ENTER)
for a channel that is not set up. This is an internal
LINK error. This message is not expected to occur. If it
does, please notify your Software Specialist or send a
Software Performance Report (SPR) to DIGITAL.>
IFE TOPS20,<
HASH IOV,0,<
An error occurred when reading the overlay file. The
status is represented by the right half of the file status
word. Refer to the DECsystem-10 Monitor Calls for the
explanation of the file status bits.>
> ;END IFE TOPS20
IFN TOPS20,<
HASH IOV,0,<
An error occurred when reading the overlay file.>
> ;END IFN TOPS20
HASH IPO,0,<
You are attempting to load a file containing an invalid
REL Block Type 11 (POLISH). This is an internal LINK
error. This message is not expected to occur. If it
does, please notify your Software Specialist or send a
Software Performance Report (SPR) to DIGITAL.>
HASH IPX,0,<
A REL block contains a reference to a nonexistent PSECT.
This error is probably caused by a fault in the language
translator used for the program.>
HASH IRB,0,<
The file is not in the proper binary format. It may have
been generated by a translator that LINK does not
recognize, or it may be an ASCII or .EXE file.>
HASH ISD,0,<
The named symbol either has a partial definition and an
explicit definition, or has two partial definitions.
Later resolution of partial definitions may result in a
multiply-defined global symbol.
A partial definition is one in which a symbol is defined
in terms of other undefined symbols. If your code has
A=:B##+3 and A=:7, then either B## will have to be 4 or A
will be multiply-defined.>
HASH ISN,0,<
The LINK symbol table routine was called with the blank
symbol. This is an internal LINK error. This message is
not expected to occur. If it does, please notify your
Software Specialist or send a Software Performance Report
(SPR) to DIGITAL.>
HASH ISO,0,<
You are attempting to load a file containing an invalid
REL Block Type 11 (POLISH). This is an internal LINK
error. This message is not expected to occur. If it
does, please notify your Software Specialist or send a
Software Performance Report (SPR) to DIGITAL.>
HASH ISP,0,<
There is an error in the global symbol table. This
message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.>
;(There is no long text for the ISS message.)
HASH IST,0,<
LINK has found errors in the switch table passed from the
SCAN module. This message is not expected to occur. If
it does, please notify your Software Specialist or send a
Software Performance Report (SPR) to DIGITAL.>
HASH ITT,0,<
REL Block Type 12 (CHAIN) must contain a number from 1 to
100 (octal) in its first word.>
;(There is no long text for the IUU message.)
HASH IVC,0,<
The range checking of LINK's internal tables and arrays
failed. The address given is the point in a LINK segment
at which failure occurred. This message is not expected
to occur. If it does, please notify your Software
Specialist or send a Software Performance Report (SPR) to
DIGITAL.>
HASH KIA,0,<
Some modules loaded were compiled for the KA10 processor,
and some for the KI10 processor. Recompile so that all
modules are compiled for the same processor.>
HASH LDS,0,<
The LINK module LNKLOD is beginning its processing.>
;(There is no long text for the LFC message.)
;(There is no long text for the LFI message.)
HASH LII,0,<
A REL Block Type 14 (INDEX) for a MAKLIB or FUDGE2 library
file is inconsistent. The library is searched, but the
index is ignored.>
HASH LIM,0,<
LINK is ready for your input.>
HASH LMN,0,<
LINK is loading the named module.>
HASH LNA,0,<
You used this name for another link. Specify a different
name for this link.>
HASH LNC,0,<
LINK cannot find the named link in memory. This message
is not expected to occur. If it does, please notify your
Software Specialist or send a Software Performance Report
(SPR) to DIGITAL.>
HASH LNL,0,<
The link with this number has not yet been loaded. The
/NODE switch is ignored. If you have used link numbers
instead of link names with the /NODE switch, you may have
confused the link numbers. To avoid this, use link
names.>
HASH LNN,0,<
The name you gave with the /NODE switch is not the name of
any loaded link. The switch is ignored.>
HASH LSM,0,<
Your use of the /NODE switch shows that you want to begin
a new overlay link, but the current link is not yet
completely loaded. LINK assumes a /LINK switch
immediately preceding the /NODE switch, and loads the link
(without a link name).>
;(There is no long text for the LSS message.)
HASH MDS,0,<
The named module contains a new definition of an already
defined global symbol. The new definition is used. Make
the definitions consistent and reload.>
HASH MOV,0,<
LINK is rearranging the low segment to make more room for
the specified area. area is one of the following:
AS=ALGOL symbol table, BG=bound global symbols, DY=dynamic
free core, FX=fixup area, GS=global symbol table, HC=your
high-segment code, LC=your low-segment code, LS=local
symbol tables, RT=relocation tables.>
HASH MPS,0,<
The LINK module LNKMAP is writing a map file.>
HASH MRN,0,<
Overlay structures consisting of more than one region are
not supported.>
HASH MSN,0,<
Alphabetical or numerical sorting of the map file is not
implemented. The symbols in the map file appear in the
order they are found in the .REL files.>
HASH MSR,0,<
You must use the /MIXFOR switch to load a mixture of
modules compiled by F40 and FORTRAN. The /MIXFOR switch
must precede any module names or filenames.>
HASH MSS,0,<
The current value of MAXCOR is too small for LINK to
operate. You can speed up future loads of this program by
setting the /MAXCOR switch to this expanded size at the
beginning of the load.>
HASH MTB,0,<
You are attempting to set MAXCOR so large that the low
segment cannot fit before the high segment. LINK will use
only the core indicated.>
HASH MTS,0,<
LINK needs more space than you gave with the /MAXCOR
switch. Give a new /MAXCOR switch with at least the
required size.>
HASH NBR,0,<
The argument you gave for the /NODE switch would indicate
a link before the root link. (For example, from a
position after the third link in a path, you cannot give
/NODE:-4.)>
HASH NCL,0,<
Your program is too large to load from LINK. LINK has
saved it as an .EXE file on disk and cleared your user
memory. You can use a GET or RUN command to load the .EXE
file. If it is still too large: use a larger machine;
obtain a larger core limit; or define an overlay
structure for your program.>
HASH NCX,0,<
Your program is too large to load into memory; LINK saved
it as an .EXE file on disk. LINK will automatically
execute the program with a RUN monitor call, but the .EXE
file will not be deleted.>
HASH NEB,0,<
No REL Block Type 5 (END) was found in the named module.
This will happen if LINK finds two Type 6 Blocks (NAME)
without an intervening END, or if an end-of-file is found
before the END. Fatal messages usually follow this
message.>
HASH NED,0,<
You gave a device that does not exist on this system.
Correct your input files and reload.>
;(There is no long text for the NSA message.)
HASH OAS,0,<
An error occurred while writing out the ALGOL symbol
table.>
HASH ODV,0,<
Specify a disk device for the overlay file.>
IFE TOPS20,<
HASH OEL,0,<
An error has occurred on the output file. The output file
is closed at the end of the last data successfully output.
The status is represented by the right half of the file
status word. Refer to the DECsystem-10 Monitor Calls for
the explanation of the file status bits.>
> ;END IFE TOPS20
IFN TOPS20,<
HASH OEL,0,<
An error has occurred on the output file. The output file
is closed at the end of the last data successfully
output.>
> ;END IFN TOPS20
IFE TOPS20,<
HASH OEM,0,<
An error has occurred on the output file. The output file
is closed at the end of the last data successfully output.
The status is represented by the right half of the file
status word. Refer to the DECsystem-10 Monitor Calls for
the explanation of the file status bits.>
> ;END IFE TOPS20
IFN TOPS20,<
HASH OEM,0,<
An error has occurred on the output file. The output file
is closed at the end of the last data successfully
output.>
> ;END IFN TOPS20
IFE TOPS20,<
HASH OES,0,<
An error has occurred on the output file. The output file
is closed at the end of the last data successfully output.
The status is represented by the right half of the file
status word. Refer to the DECsystem-10 Monitor Calls for
the explanation of the file status bits.>
> ;END IFE TOPS20
IFN TOPS20,<
HASH OES,0,<
An error has occurred on the output file. The output file
is closed at the end of the last data successfully
output.>
> ;END IFN TOPS20
HASH OEX,0,<
An error has occurred on the output file. The output file
is closed at the end of the last data successfully output.
The status is represented by the right half of the file
status word. Refer to the DECsystem-10 Monitor Calls for
the explanation of the file status bits.>
IFE TOPS20,<
HASH OFN,0,<
LINK handles F40-compiled code with its LNKF40 module.
Your installation has substituted a dummy version of
LNKF40. You can either recompile with the FORTRAN
compiler, or request your installation to reload LINK with
the real LNKF40 module.>
> ;END IFE TOPS20
IFN TOPS20,<
HASH OFN,0,<
The standard released version of LINK does not support F40
code.>
> ;END IFN TOPS20
HASH OHC,0,<
An error occurred while writing out your high-segment
code.>
HASH OHN,0,<
Internal symbols in the overlay handler could not be
referenced. If you are using your own overlay handler,
this is a user error; if not, it is an internal error.
This message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.>
HASH OLC,0,<
An error occurred while writing out your low-segment
code.>
HASH OLS,0,<
An error occurred while writing out your local symbol
table.>
HASH OMB,0,<
The /OVERLAY switch must appear before you can use any of
the following switches: /ARSIZE, /LINK, /NODE, /PLOT,
/SPACE. (It is sufficient that the /OVERLAY switch appear
on the same line as the first of these switches you use.)>
;(There is no long text for the ONS message.)
IFE TOPS20,<
HASH OOV,0,<
An error has occurred while writing the overlay file. The
status is represented by the right half of the file status
word. Refer to the DECsystem-10 Monitor Calls for the
explanation of the file status bits.>
> ;END IFE TOPS20
IFN TOPS20,<
HASH OOV,0,<
An error has occurred while writing the overlay file.>
> ;END IFN TOPS20
HASH OS2,0,<
LINK's module LNKOV2 is writing your overlay file.>
HASH PAS,0,<
The job is too large to fit into the allowed memory and
the ALGOL symbol table is being moved to disk.>
HASH PBI,0,<
The highest address allocated in the named module is
greater than 512P. This is usually caused by dimensioning
large arrays. Modify your programs or load list to reduce
the size of the load.>
HASH PEF,0,<
LINK found an end-of-file inside a REL Block (that is, the
word count for the block extended beyond the
end-of-file).>
HASH PHC,0,<
The job is too large to fit into the allowed memory and
your high-segment code is being moved to disk.>
HASH PLC,0,<
The job is too large to fit into the allowed memory and
your low-segment code is being moved to disk.>
HASH PLS,0,<
The job is too large to fit into the allowed memory and
your local symbol tables are being moved to disk.>
;(There is no long text for the POO message.)
HASH PSF,0,<
The feature you requested is not available.>
HASH PUF,0,<
A PAGE. UUO to rearrange LINK's address space has failed,
and returned the error code given. You may be able to
avoid this problem by varying the physical and virtual
limits for the job, or by varying the values given with
the /CORE and /MAXCOR switches. This is an internal LINK
error. This message is not expected to occur. If it
does, please notify your Software Specialist or send a
Software Performance Report (SPR) to DIGITAL.>
HASH RBS,0,<
The REL Block is inconsistent. This may be caused by
incorrect output from a translator (for example, missing
argument for an END block). Recompile the module and
reload.>
HASH RCU,0,<
The global symbol you gave with the /SET switch is not
defined. Load a module that defines the symbol.>
HASH RED,0,<
LINK is reclaiming memory by deleting its internal
tables.>
;(There is no long text for the RER message.)
HASH RGS,0,<
LINK is expanding the global symbol table either to a
prime number larger than your /HASHSIZE switch requested,
or by about 50 percent. You can speed up future loads of
this program by setting /HASHSIZE this large at the
beginning of the load.>
;(There is no long text for the RLC message.)
HASH RUC,0,<
LINK attempted to return memory to the memory manager, but
the specified memory was never allocated to this job.
This message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.>
HASH SFU,0,<
There are errors in the local symbol table. Loading
continues, but any maps you request will not contain
control section lengths. This message is not expected to
occur. If it does, please notify your Software Specialist
or send a Software Performance Report (SPR) to DIGITAL.>
HASH SIF,0,<
LINK's hashing algorithms failed; they are trying to
write a new symbol over an old one. You may be able to
load your files in a different order. This message is not
expected to occur. If it does, please notify your
Software Specialist or send a Software Performance Report
(SPR) to DIGITAL.>
HASH SLS,0,<
You have specified /SYMSEG:HIGH or /SYMSEG:PSECT when
loading an overlay structure. Specify /SYMSEG:LOW or
/SYMSEG:DEFAULT.>
HASH SMP,0,<
You loaded some SIMULA procedures or classes, but no main
program. Missing start address and undefined symbols will
terminate execution.>
HASH SNC,0,<
You defined a COMMON symbol with the same name as a
non-COMMON symbol. You must decide which definition you
want. If you want the COMMON definition, load the COMMON
area first.>
HASH SNL,0,<
LINK is ready to process the next command line.>
HASH SNP,0,<
The named subroutine is in a different path from the
calling link. Redefine your overlay structure so that the
subroutine is in the correct path.>
IFE TOPS20,<
HASH SOE,0,<
An error occurred in outputting the .EXE file. The file
was closed after the last successful output. The status
is represented by the right half of the file status word.
Refer to the DECsystem-10 Monitor Calls for the
explanation of the file status bits.>
> ;END IFE TOPS20
IFN TOPS20,<
HASH SOE,0,<
An error occurred in outputting the .EXE file. The file
was closed after the last successful output.>
> ;END IFN TOPS20
HASH SRB,0,<
You cannot /SET the named relocation counter below its
initial value. The attempt is ignored.>
HASH SSN,0,<
Alphabetical or numerical sorting of the symbol table is
not implemented. The symbols appear in the order they are
found.>
HASH SST,0,<
LINK is rearranging the symbol table, and if required, is
converting the symbols from the new to old format as
indicated on the /SYMSEG, /SYMBOL, or /DEBUG switch.>
HASH STC,0,<
The symbol table has been sorted and moved according to
the /SYMSEG, /SYMBOL, or /DEBUG switch.>
HASH T13,0,<
REL Block Type 13 (LVAR) is obsolete. Use the MACRO
pseudo-op TWOSEG.>
HASH TDS,0,<
LINK has already loaded the initial symbol table. To
prevent this loading, place the /NOINITIAL switch before
the first file specification.>
HASH TEC,0,<
You cannot expand an already defined COMMON area. Load
the largest definition of a given named COMMON first, or
use the /COMMON switch to reserve space for it. You can
define a new COMMON area with a new name any time.>
HASH TMA,0,<
You have more ambiguous subroutine requests (indicated by
LNKARL messages) than will fit in the table for this link.
Continue loading. Your load will abort at the end with a
LNKABT message; if you have loaded all modules, the
message will give the size of the needed /ARSIZE switch
for a reload.>
HASH TTF,0,<
In producing the index for a map file, LINK found more
program names than there are programs. The symbol table
is in error. This message is not expected to occur. If
it does, please notify your Software Specialist or send a
Software Performance Report (SPR) to DIGITAL.>
HASH UAR,0,<
The named symbol was referenced in an .ASSIGN pseudo-op,
but the symbol is undefined. The .ASSIGN pseudo-op is
ignored. You should load a module that defines the
symbol.>
;(There is no long text for the UGS message.)
HASH UNS,0,<
Extraction of symbols from a MACRO universal file is not
implemented.>
HASH URC,0,<
In a REL Block Type 2 (SYMBOLS), the first 4 bits of each
word pair contain the Radix-50 symbol code. LINK found
one or more invalid codes in the block.>
HASH USA,0,<
You gave an undefined global symbol as the start address.
Load a module that defines the symbol.>
HASH USC,0,<
The named link contains a call for a subroutine you have
not loaded. If the subroutine is required for execution,
you must reload, including the required module in the
link.>
;(There is no long text for the VAL message.)
;(There is no long text for the XCT message.)
HASH ZSV,0,<
You omitted required arguments for a switch (for example,
/REQUIRE with no symbols). Respecify the switch.>
SUBTTL INDEXED MESSAGES
INDEX <FEE,FRE>,0,0,<
One of the following conditions occurred:
1. The filename given was illegal.
2. When updating a file, the filename given did not match
the file to be updated.
3. The RENAME monitor call following a LOOKUP monitor call
failed.>
INDEX <FLE,GSE>,0,0,<
The file requested by the user was not found. The user
should respecify the correct filename.>
INDEX <FEE,FLE,FRE,GSE>,1,0,<
The directory does not exist on the named file structure,
or the project-programmer number given was incorrect.>
INDEX <FEE,FLE,FRE,GSE>,2,0,<
The user does not have the correct privileges to access
the named file.>
INDEX FEE,-1,0,<
The directory on the DECtape has no room for the file.>
INDEX <FEE,FLE,FRE,GSE>,3,0,<
Another user is currently modifying the named file. The
user should try accessing the file later.>
INDEX <FEE,FLE,FRE,GSE>,4,0,<
The specified filename already exists, or a different
filename was given on the ENTER monitor call following a
LOOKUP monitor call.>
INDEX <FEE,FLE,FRE,GSE>,5,%SPR,<
The user specified an illegal sequence of monitor calls
(e.g., a RENAME without a preceding LOOKUP or ENTER, or a
LOOKUP after an ENTER).>
INDEX <FEE,FLE,FRE,GSE>,6,0,<
One of the following conditions occurred:
1. Transmission, device, or data error occurred while
attempting to read the UFD or RIB.
2. A hardware-detected device or data error was detected
while reading the UFD RIB or UFD data block.
3. A software-detected data inconsistency error was
detected while reading the UFD RIB or file RIB.>
INDEX <FEE,FLE,FRE,GSE>,7,%NPOS,<
The named file is not a saved file.>
INDEX <FEE,FLE,FRE,GSE>,10,%NPOS,<
The system cannot supply enough memory to use as buffers
or to read in a program.>
INDEX <FEE,FLE,FRE,GSE>,11,%NPOS,<
The device indicated by the user is currently not
available.>
INDEX <FEE,FLE,FRE,GSE>,12,%NPOS,<
The device specified by the user does not exist.>
INDEX <FEE,FLE,FRE,GSE>,13,%NPOS,<
The machine does not have a two-register relocation
capability.>
INDEX <FEE,FLE,FRE,GSE>,14,0,<
There is no room on the file structure for the named file,
or the user's quota on the file structure would be
exceeded if the file were placed on the structure.>
INDEX <FEE,FLE,FRE,GSE>,15,0,<
The user cannot write on the specified device because it
is write-locked.>
INDEX <FEE,FLE,FRE,GSE>,16,0,<
There is not enough table space in the monitor's 4-WOrd
blocks for the specified file. The user should try running
the job at a later time.>
INDEX <FEE,FLE,FRE,GSE>,17,0,<
Because of the user's quota or the available space on the
device, the total number of blocks requested could not be
allocated and a partial allocation was given.>
INDEX <FEE,FLE,FRE,GSE>,20,%NPOS,<
The block required by LINK is not available for allocation.>
INDEX <FEE,FLE,FRE,GSE>,21,0,<
The user attempted to supersede an existing directory.>
INDEX <FEE,FLE,FRE,GSE>,22,%NPOS,<
The user attempted to delete a directory that was not
empty.>
INDEX <FEE,FLE,FRE,GSE>,23,0,<
The required sub-file directory in the specified path was
not found.>
INDEX <FEE,FLE,FRE,GSE>,24,0,<
A LOOKUP and ENTER monitor call was performed on generic
device DSK and the search list is empty.>
INDEX <FEE,FLE,FRE,GSE>,25,0,<
An attempt was made to create a subfile directory nested
deeper than the maximum level allowed.>
INDEX <FEE,FLE,FRE,GSE>,26,0,<
No file structure in the job's search list has both the
no-create bit and the write-lock bit equal to zero and has
the UFD or SFD specified by the default or explicit path.>
INDEX <FEE,FLE,FRE,GSE>,27,%NPOS,<
A GETSEG monitor call was issued from a locked low segment
to a high segment which is not a dormant, active, or idle
segment.>
INDEX <FEE,FLE,FRE,GSE>,30,0,<
A LOOKUP and ENTER monitor call was given to update a
file, but the file cannot be updated for some reason
(e.g., another user is superseding it or the file was
deleted between the time of the LOOKUP and the ENTER).>
INDEX <FEE,FLE,FRE,GSE>,31,0,<
The end of the low segment is above the beginning of the
high segment.>
INDEX <FEE,FLE,FRE,GSE>,32,%SPR,<
This message indicates that a LOOKUP, ENTER, or RENAME
error occurred which was larger in number than the errors
LINK knows about.>
IF2,< PURGE N,M>
SUBTTL COMMON MESSAGES
REPEAT 0,< ;NO LONGER USED
;SHOULD BE REIMPLEMENTED IN COOPERATION
;WITH THE DOCUMENTATION GROUP
%L10: %SPR
.ASCIZ <
This is an internal LINK error.>
%F40: %SPR
.ASCIZ <
Incorrect code has been generated by the F40 compiler.>
%E$$: 0
.ASCIZ <
LINK could not make the named file on the disk (LC=user's
low segment code, HC=user's high segment code, LS=local
symbol table). The user could be over quota, or the disk
could be full or have errors.>
%I$$: %AREA
.ASCIZ <
An error occurred while reading in the named area.>
%O$$: %AREA
.ASCIZ <
An error occurred while writing out the named area.>
%OE$: %STS
.ASCIZ <
An error has occurred on the output file. The output file
is closed at the end of the last data that was
successfully output.>
%P$$: 0
.ASCIZ <
the job is too large to fit into the allowed memory and
the named area is being moved to disk (LC=user low segment
code, HC=user high segment code, LS=local symbol table).>
IFE TOPS20,<
%STS: 0
.ASCIZ <
The status is represented by the right half of the file
status word. Refer to DECsystem-10 Monitor Calls for the
explanation of the file status bits.>
>
IFN TOPS20,<
%STS: 0
0
>
%AREA: %STS
.ASCIZ <
(LC=user's low segment code, HC=user's high segment code,
LS=local symbol table, and GS=global symbol table).>
> ;END REPEAT 0
%NPOS: %SPR
.ASCIZ <
This message can never occur and is included only for
completeness of the LOOKUP, ENTER, and RENAME error codes.>
%SPR: 0
.ASCIZ <
This message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DEC.>
ERRLIT:
END LNKERR