Trailing-Edge
-
PDP-10 Archives
-
ap-c800d-sb
-
pc.mac
There are 10 other files named pc.mac in the archive. Click here to see a list.
TITLE PC FOR LIBOL V12.
SUBTTL CONVERT BINARY TO COMP-3 /ACK
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1974, 1979 BY DIGITAL EQUIPMENT CORPORATION
;REVISION HISTORY:
;V10 *****
; 15-DEC-74 /ACK CREATION.
;*****
SEARCH LBLPRM ;DEFINE PARAMETERS.
%%LBLP==:%%LBLP
EXTERN EASTB. ;FORCE EASTBL TO BE LOADED.
HISEG
COMMENT \
THIS ROUTINE CONVERTS A ONE OR TWO WORD BINARY NUMBER TO A
COMP-3 ITEM.
CALL:
MOVE 16,[Z AC,PARAMETER ADDRESS]
PUSHJ 17,PC3.
PARAMETERS:
THE ACCUMULATOR FIELD OF AC 16 CONTAINS THE AC WHICH CONTAINS THE
FIRST WORD OF THE NUMBER TO BE CONVERTED. THE SECOND WORD, IF ANY, IS IN
THE FOLLOWING AC.
THE RIGHT HALF OF AC 16 POINTS TO A WORD IN THE FOLLOWING FORMAT:
BITS 0-5 BYTE RESIDUE FOR THE OUTPUT FIELD.
BIT 6 1 IF THE FIELD IS EXPLICITLY SIGNED.
BITS 7-17 SIZE OF THE OUTPUT FIELD.
BITS 18-35 ADDRESS OF THE FIRST BYTE OF THE OUTPUT FIELD.
THE OUTPUT IS A SEQUENCE OF NINE BIT BYTES EACH OF WHICH,EXCEPT
THE LAST, CONSISTS OF TWO FOUR BIT DECIMAL DIGITS, RIGHT JUSTIFIED IN EACH
BYTE. THE LAST BYTE CONSTISTS OF A DECIMAL DIGIT IN BITS 1 THROUGH 4 AND
A SIGN IN BITS 5 THROUGH 8.
RETURNS:
CALL+1 ALWAYS.
REGISTERS USED:
JAC, AC, AC+1, AC+2, CNT, SAV9, SW, IPTR
\
;LOCAL AC DEFINITIONS.
SAV9==TAC2
OPTR==IPTR
ENTRY PC3.
EXTERN SET1. ;ROUTINE TO PICK UP THE PARAMETERS.
EXTERN PACFL. ;POINTER TO THE NUMBER OF THE AC INTO
; WHICH WE ARE TO PLACE THE RESULT.
PC3.: MOVEI CH, ^D8 ;TELL SET1. THAT WE ARE PLAYING
; WITH EBCDIC.
JSP JAC, SET1. ;GO PICK UP THE PARAMETERS.
LDB AC+2, PACFL. ;FIND OUT WHERE THE INPUT IS.
MOVE AC+1, (AC+2) ;PICK IT UP.
MOVE AC+2, 1(AC+2) ;(JUST IN CASE IT'S DOUBLE PRECISION.)
JUMPL AC+1, PC4 ;JUMP IF THE INPUT IS NEGATIVE.
CAIG CNT, ^D10 ;ONE WORD?
JRST PC3 ;YES, GO TO SINGLE PRECISION ROUTINE.
;HERE WE CONVERT A TWO WORD BINARY NUMBER TO COMP-3.
PC1: DIV AC+1, PC3T1+5 ;BREAK OFF NINE DIGITS.
MOVE SAV9, AC+2 ;SAVE THEM.
IDIVI AC+1, ^D10 ;GET THE TENTH DIGIT.
HRRI SW, (AC+2) ;SAVE IT.
MOVEI CNT, -^D10(CNT) ;FIGURE OUT HOW MANY CHARS TO CONVERT.
JSP JAC, PC3CVT ;GO CONVERT THEM.
ORI AC+1, (SW) ;COMBINE THE ELEVENTH AND TENTH DIGITS.
DPB AC+1, OPTR ;STORE THEM.
MOVE AC+1, SAV9 ;GET THE OTHER NINE DIGITS BACK.
SKIPA CNT, [EXP ^D9] ;SET THE COUNT.
;WE COME HERE TO CONVERT A SINGLE PRECISION NEGATIVE NUMBER.
PC2: MOVMS AC+1 ;MAKE IT POSITIVE.
;WE COME HERE TO CONVERT A SINGLE PRECISION POSITIVE NUMBER.
PC3: JSP JAC, PC3CVT ;CONVERT THE DIGITS.
ORI AC+1, 17 ;ASSUME THE RESULT IS UNSIGNED.
JUMPGE SW, PC3A ;JUMP IF IT IS.
TLNN SW, LS!LM ;WAS THE INPUT NEGATIVE?
TRZA AC+1, 3 ;NO, MAKE THE SIGN 14.
TRZ AC+1, 2 ;YES, SIGN BECOMES 15.
PC3A: DPB AC+1, OPTR ;STORE THE FIRST DIGIT AND THE SIGN.
POPJ PP, ;RETURN.
;WE COME HERE IF THE INPUT IS NEGATIVE.
PC4: TLO SW, LS!LM ;TURN ON THE NEGATIVE SIGN SWITCHES.
CAIG CNT, ^D10 ;ONE WORD?
JRST PC2 ;YES, GO MAKE THE INPUT POSITIVE.
SETCA AC+1, AC+1 ;NEGATE THE HIGH ORDER WORD.
MOVNS AC+2 ;NEGATE THE LOW ORDER WORD.
TLZ AC+2, (1B0) ;CLEAR THE SIGN OF THE LOW ORDER WORD.
JUMPN AC+2, PC1 ;IF THE LOW ORDER WORD IS NOT
; ZERO, GO START CONVERTING.
AOJA AC+1, PC1 ;OTHERWISE BUMP THE HIGH ORDER
; WORD AND GO START CONVERTING.
;SUBROUTINE TO CONVERT A BINARY NUMBER TO PACKED DECIMAL.
COMMENT \
CALL:
JSP JAC, PC3CVT
ENTRY CONDITIONS:
(AC+1) = THE NUMBER TO BE CONVERTED.
(CNT) = NUMBER OF DIGITS TO BE CONVERTED
EXIT CONDITIONS:
(AC) = THE LAST DIGIT STORED IN BITS 32-35.
(AC+1) = THE LAST DIGIT STORED IN BITS 28-31.
(AC+2) = 0
(CNT) = 0
RETURNS:
CALL+1 ALWAYS.
\
PC3CVT: IDIV AC+1, DECTAB##(CNT) ;MAKE SURE THE NUMBER IS IN RANGE.
ADDI CNT, 2 ;SEE HOW MANY NINE BIT BYTES WE
LSH CNT, -1 ; HAVE.
PC3CV1: MOVE AC, AC+2 ;GET THE REMAINING DIGITS.
IDIV AC, PC3T2-1(CNT) ;GET THE NTH DIGIT.
IDIV AC+1, PC3T1-1(CNT) ;GET THE N+1ST DIGIT.
DPB AC, [POINT 4,AC+1,31] ;COMBINE THEM.
IDPB AC+1, OPTR ;STORE THEM.
SOJG CNT, PC3CV1 ;LOOP IF THERE ARE MORE.
JRST (JAC) ;OTHERWISE RETURN.
SUBTTL TABLES.
PC3T1: DEC 1
DEC 10
DEC 1000
DEC 100000
DEC 10000000
DEC 1000000000
PC3T2: DEC 1
DEC 100
DEC 10000
DEC 1000000
DEC 100000000
DEC 10000000000
END