Trailing-Edge
-
PDP-10 Archives
-
bb-bt99h-bb
-
swifil.x14
There are 3 other files named swifil.x14 in the archive. Click here to see a list.
TITLE .FILE SWIL file-level operations
SUBTTL Robert Houk/RDH
SEARCH SWIDEF, SWIL ;SWIL PACKAGE DEFINITIONS
SEARCH JOBDAT, MACTEN, UUOSYM ;STANDARD DEFINITIONS
SALL ;PRETTY LISTINGS
.DIREC FLBLST ;PRETTIER LISTINGS
TWOSEG 400000
COMMENT \
COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1984,1986. ALL RIGHTS RESERVED.
THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
TRANSFERRED.
THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
CORPORATION.
DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
\
SUBTTL Version and Revision History
MAJVER==13 ;MAJOR VERSION LEVEL
MINVER==0 ;MINOR (MAINTENANCE RELEASE) LEVEL
CSTVER==0 ;CUSTOMER VERSION (WHO LAST . . .)
EDTVER==1045 ;EDIT LEVEL
%%FILE==:<BYTE (3)CSTVER(9)MAJVER(6)MINVER(18)EDTVER>
%%SWIL==:%%SWIL ;SHOW (AND SYNCHRONIZE) SWIL VERSION
IF2,< PURGE CSTVER,MAJVER,MINVER,EDTVER>
;INITIAL CREATION
;1000 RDH 01-Jan-84
; Incorporate into SWIL %12(1000), sync edit level at 1000
;1001 RDH 31-Mar-84
; Fixes to get along with RT11: default ASCII RAT to STREAM;
; handle null directory name strings.
;1002 RDH 31-Mar-84
; Default BLS field to 512 if otherwise blank and 8-bit BSZ field
; so that DPIAF calculates correct file size parameters for those
; systems (RSX/VAX/RT/etc.) that send blank/null BLS fields.
;1004 RDH 16-Jul-84
; Only ask for 3-part name messages (DN3) if the remote FAL
; supports control of same (N3D).
;1007 RDH 28-Nov-84
; FX.APP referenced in .FXMOD, but defined in .FXCTL
;1010 RDH 29-Nov-84
; File parameters (e.g., .IOPRT) lost on file create.
;1022 LEO 09-Sep-85
; Do Copyrights.
;1025 DRB 22-Nov-85
; Close all of WILD's channels on an IOABO call.
;1026 RDH 25-Dec-85
; Add .IOZAP routine to "blow away" the CDB, move [1025] to this
; new routine.
;1041 RDH 4-Jan-86 SPR 10-35424
; No support for network Line Sequence Numbers.
;1042 RDH 23-Jan-86
; Implement /IOMODE:A8CII.
;1045 BSC 18-Jun-86
; Send CONTINUE(ABORT) interrupt msg. before ACCOMP(RESET).
SUBTTL IOINA - Allocate and initialize I/O CDB
;IOINA -- ALLOCATE AND INITIALIZE AN I/O CHANNEL CONTROL BLOCK
;Call is:
;
; MOVX T2,<IVC>
; PUSHJ P,.IOINA
; error return
; normal return
;
;Where <IVC> is the address of the initialization vector used to setup
;the CDB.
;
;On error return no memory was available.
;
;On normal return the CDB has been allocated and is set for use by the
;file operations. The address of the CDB is returned in T1.
;
;Uses T2 - T4.
ENTRY .IOINA
INTERN IOINA0, IOINA1
.IOINA:
IOINA0:
IOINA1: PUSHJ P,IOINA5 ;ALLOCATE THE CDB
POPJ P, ;NO MEMORY
PJRST .IOINI ;NOW SETUP THE CDB
;ALLOCATE THE CDB
IOINA5: PUSHJ P,.SAVE4## ;SAVE THE P'S
PUSHJ P,TSAV12## ;ALSO SAVE THE VECTOR POINTER
PUSHJ P,.INVWI## ;INITIALIZE INVWD
PUSHJ P,.INVWD## ;READ THE EXTRA SPACE ALLOCATION REQUESTED
ADDI T1,.IOMAX ;ADD IN BASE SIZE OF THE CDB
PUSHJ P,.MMGWD## ;ALLOCATE A HUNK OF MEMORY
STOPCD <Memory allocation failed in IOINA5>
MOVEM T2,-T1(P) ;SAVE ADDRESS OF NEW CDB
CAILE T1,.IOMAX ;WAS THERE ANY EXTRA SPACE?
MOVEM T1,.IOXSZ(T2) ;YES, SET "EXTRA" SPACE MARKER
MOVEI T1,.IOMAX ;BASE SIZE OF THE CDB
MOVEM T1,.IOSIZ(T2) ;SET THAT TOO IN THE CDB
JRST .POPJ1## ;SUCCESSFUL RETURN
SUBTTL IOINI - Initialize an I/O CDB
;IOINI -- INITIALIZE AN I/O CHANNEL CONTROL BLOCK
;Call is:
;
; MOVX T1,<CDB>
; MOVX T2,<IVC>
; PUSHJ P,.IOINI
; error return
; normal return
;
;Where <CDB> is the address of the "I/O Channel Control Block"; and
;<IVC> is the address of the initialization vector used to setup the
;CDB.
;
;The error return is not exercised.
;
;On normal return the CDB is set for use by file open routines.
;
;Uses T4.
ENTRY .IOINI
INTERN IOINI0, IOINI1
.IOINI: PUSHJ P,.SACIO## ;SETUP IO
IOINI0: PUSHJ P,.SAVE4## ;SAVE THE P'S
IOINI1: PUSHJ P,.INVWI## ;SETUP FOR INVWD CALLS
MOVEM T1,.IOCVR(IO) ;SAVE VERSION WORD IN THE CDB
SETZM .IOCCF(IO) ;CLEAR ALL FLAGS
SETZM .IOBZI(IO) ;ZERO START OF TO-BE-ZEROED BLOCK
MOVSI T4,.IOBZI(IO) ;CONCOCT A
HRRI T4,.IOBZI+1(IO) ; BLT POINTER TO
BLT T4,.IOEZI-1(IO) ; ZERO THE CDB
MOVEI T4,.IOMAX ;INITIAL SIZE OF THE CDB
SKIPN .IOSIZ(IO) ;IS THE SIZE SET (PRESUMABLY CORRECTLY)?
MOVEM T4,.IOSIZ(IO) ;NO, SET IN THE CDB FOR OTHERS
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;NOW SETUP THE CDB BASED ON THE INITIALIZATION VECTOR
;ANY "EXTRA" SPACE REQUIREMENTS
PUSHJ P,.INVWD## ;GET DEFAULT EXTRA SPACE REQUIREMENTS
; AND JUST EAT IT (ONLY MEANINGFUL FOR IOINA)
SKIPE T4,.IOXSZ(IO) ;ANY "EXTRA" SPACE ALLOCATED?
MOVEI T4,.IOXBZ ;YES, GET START INDEX
MOVEM T4,.IOXFF(IO) ;AND SET FIRST FREE EXTRA SPACE (IF ANY)
; (NOTE .IOXFF IS OFFSET RELATIVE TO THE CDB)
;DEFAULT BUFFERING VALUE (COUNT,,TOTAL BUFFERING SPACE)
PUSHJ P,.INVWD## ;GET DEFAULT .IODBF WORD
MOVEM T1,.IODBF(IO) ;AND SET IT IN THE CDB
;DEFAULT BUFFERING LIMIT (MAXIMUM TOTAL BUFFERING SPACE)
PUSHJ P,.INVWD## ;GET DEFAULT .IOMBF WORD
MOVEM T1,.IOMBF(IO) ;AND SET IT IN THE CDB
;I/O CONTROL WORD (I/O STRUCTURING AND FILE DATA MODE)
PUSHJ P,.INVWD## ;GET FILE I/O CONTROL WORD
MOVEM T1,.IOIOC(IO) ;SET IN THE CDB
;I/O ERROR WORD (DEFAULT ERROR HANDLING CONTROL)
PUSHJ P,.INVWD## ;GET FILE I/O ERROR WORD
MOVEM T1,.IOIOE(IO) ;AND SET IT IN THE CDB
;I/O MODE WORD (FILE OPEN/CLOSE/ETC. PARAMETERS)
PUSHJ P,.INVWD## ;GET FILE I/O MODE WORD
MOVEM T1,.IOIOM(IO) ;SET IN THE CDB
;I/O RETURN VALUES SETTING (RESERVED)
PUSHJ P,.INVWD## ;GET THE DEFAULT .IOIOR WORD
;*** MOVEM T1,.IOIOR(IO) ;AND SET IT IN THE CDB
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;SET THE VARIOUS SERVICE ROUTINE DISPATCH POINTERS
XMOVEI T4,OPII ;INITIAL WSR
MOVEM T4,.IOWSR(IO) ;SET IN THE CDB
XMOVEI T4,.IOIIE## ;INITIAL ISR IS ERROR FILE NOT OPEN
MOVEM T4,.IOISR(IO) ;SET IN CDB
XMOVEI T4,.POPJ1## ;INITIAL ISR SHUTDOWN SUCCEEDS
MOVEM T4,.IOISS(IO) ;SET IN CDB
XMOVEI T4,.IOOIE## ;INITIAL OSR IS ERROR FILE NOT OPEN
MOVEM T4,.IOOSR(IO) ;SET IN CDB
XMOVEI T4,.POPJ1## ;INITIAL OSR SHUTDOWN SUCCEEDS
MOVEM T4,.IOOSS(IO) ;SET IN CDB
JRST .POPJ1## ;ALL DONE
SUBTTL IOZAP - Zap a CDB
;IOZAP -- ZAP ("BLOW AWAY") A CDB, FILE, ETC.
;Call is:
;
; MOVX T1,<CDB>
; PUSHJ P,.IOZAP
; ERROR RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the I/O CDB.
;
;The error return is not exercised.
;
;On normal return any file I/O associated with the I/O stream has been
;aborted. Any network I/O (as distinct from "file" (read "DAP") I/O) is
;terminated. Wildcarding (considered "file I/O" here) is aborted. Any I/O
;buffers are deallocated. The CDB is restored to virgin state.
;
;Note: for proper operation, .IOINI must be called again for the specified
;CDB in order to reset preferred buffering, overriding I/O mode, etc.
;
;Uses T1, T2, T3, T4
ENTRY .IOZAP
INTERN IOZAP0, IOZAP1
.IOZAP: PUSHJ P,.SACIO## ;SETUP IO
IOZAP0: PUSHJ P,.SAVE4## ;PLAY IT SAFE
IOZAP1: PUSHJ P,IOABO1 ;ABORT ANY FILE I/O IN PROGRESS
JFCL ;ONE WAY OR ANOTHER . . .
PUSHJ P,IORLS1 ;FREE UP BUFFERS/ETC.
JFCL ;FRANKLY, I DON'T CARE
SKIPE T1,.IOCHN(IO) ;AT THIS POINT, WE SHOULDN'T HAVE A CHANNEL
RESDV. T1, ;TRY HARDER TO GET RID OF THIS CHANNEL
JFCL ;TOUGH NOUGIES
PUSHJ P,.LKZAP## ;CLEAR OUT WILD'S CHANNELS/ETC.
JFCL ;WHO CARES
;Continued on next page
;Continued from previous page
;Now blow away any network activity associated with this CDB
IOZAP3: MOVE T1,.IOCCF(IO) ;COPY OF CURRENT CHANNEL CONTROL FLAGS
TXNE T1,IO.NET!IO.ANF!IO.DCN!IO.NBA ;NETWORK ACTIVITY?
PUSHJ P,NTZAP1## ;YES, BLOW IT AWAY
JFCL ;HO HUM
;Now zero out the CDB
IOZAP8: SETZM .IOCCF(IO) ;CLEAR ALL FLAGS
SETZM .IOBZI(IO) ;ZERO START OF TO-BE-ZEROED BLOCK
MOVSI T4,.IOBZI(IO) ;CONCOCT A
HRRI T4,.IOBZI+1(IO) ; BLT POINTER TO
BLT T4,.IOEZI-1(IO) ; ZERO THE CDB
SKIPE T4,.IOXSZ(IO) ;ANY EXTRA ALLOCATION?
MOVEI T4,.IOXBZ ;YES, FETCH RELATIVE "FIRST FREE"
MOVEM T4,.IOXFF(IO) ;AND RESET INTRA-CDB "FF" POINTER
JRST .POPJ1## ;IF WE GOT THIS FAR THEN WE ARE SUCCESSFUL
SUBTTL IOPND - OPEN [wild] input network/node stream
;IOPND -- OPEN [WILD] INPUT NODE
;CALL IS:
;
; MOVX T1,<CDB>
; PUSHJ P,.IOPND
; EXCEPTION RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the I/O CDB which contains the pointer
;to the SCAN file spec blocks.
;
;IOPND is used to open a link to a remote DAP server only, and not
;to a real file. This routine is for the use of the NFT/NIP "NETWORK"
;command.
;
;The exception error is taken if a "file access" error occurs, if a
;file initialization error occurs, or if there are no more files
;available (i.e., the input file specification is exhausted).
;
;On normal return a DAP link has been established to the "next" node.
;The I/O CDB file parameters have been set as appropriate.
;
;Uses T1, T2, T3, T4.
ENTRY .IOPND
INTERN IOPND0, IOPND1
.IOPND: PUSHJ P,.SACIO## ;SETUP I/O
IOPND0: PUSHJ P,.SAVE4## ;SAVE THE P ACS
IOPND1: PUSHJ P,TSAV14## ;AND THE T ACS TOO
MOVX M0,IO.OND ;OPEN NETWORK/DAP ONLY, NO FILE
IORM M0,.IOCCF(IO) ;MARK THAT FOR OTHERS
PJRST IOPIN2 ;NOW GO DO WILD AND WACKY STUFF
SUBTTL IOPIN - OPEN [wild] input file stream
;IOPIN -- OPEN [WILD] INPUT FILE
;CALL IS:
;
; MOVX T1,<CDB>
; PUSHJ P,.IOPIN
; EXCEPTION RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the I/O CDB which contains the pointer
;to the SCAN file spec blocks.
;
;The exception error is taken if a file access error occurs, if a
;file initialization error occurs, or if there are no more files
;available (i.e., the input file specification is exhausted).
;
;On normal return a file has been OPENed and is available for reading.
;The I/O CDB file parameters have been set as appropriate.
;
;Uses T1, T2, T3, T4.
ENTRY .IOPIN
INTERN IOPIN0, IOPIN1
.IOPIN: PUSHJ P,.SACIO## ;SETUP I/O
IOPIN0: PUSHJ P,.SAVE4## ;SAVE THE P ACS
IOPIN1: PUSHJ P,TSAV14## ;AND THE T ACS TOO
IOPIN2: MOVE P1,.IOCCF(IO) ;GET CHANNEL CONTROL FLAGS
TXNN P1,IO.OPN ;IS A FILE ALREADY/STILL OPEN HERE?
JRST IOPIN3 ;NO
PUSHJ P,IOABO1 ;YES, GET RID OF IT
JFCL ;HMMMM
;CLEAR OUT POSSIBLY-STALE FILE INFORMATION
IOPIN3: SETZM .IOBZC(IO) ;START OF TO-BE-CLEARED ON CLOSE
MOVEI T2,.IOBZC+1(IO) ;CONCOCT A
HRLI T2,-1(T2) ; BLT POINTER TO
BLT T2,.IOEZC-1(IO) ; CLEAR THE TO-BE-CLEARED AREA
;NOW DISPATCH BASED ON CURRENT WILDCARDED INPUT STATE
IOPIN5: SKIPE .IOWSR(IO) ;FIRST CALL?
JRST @.IOWSR(IO) ;NO, DISPATCH TO STATE ROUTINE
;HERE TO INITIALIZE FOR WILD CARD FILE SEARCHES
OPII: SETZM .IOFSC(IO) ;CLEAR POINTER TO INITIALIZE .LKWLD
JRST OPIIL ;START UP, ASSUMING LOCAL FILE SERVICE
;HERE WHEN INPUT STREAM EXHAUSTED
OPII30: XMOVEI T1,OPII90 ;SET SERVICE DISPATCH ADDRESS
MOVEM T1,.IOWSR(IO) ; TO RETURN INPUT EXHAUSTED CODE
MOVX M0,$EFIXN ;INPUT STREAM EXHAUSTED NORMALLY
POPJ P, ;RETURN WITH EXCEPTION CODE
OPII90: MOVX M0,$EFIXE ;INPUT STREAM EXHAUSTED (REDUNDANTLY)
POPJ P, ;RETURN WITH ERROR CODE
;HERE FOR LOCAL FILE REQUEST
OPIIL: XMOVEI T1,OPIL ;ADDRESS OF LOCAL "STATE" SERVICE ROUTINE
MOVEM T1,.IOWSR(IO) ;SET FOR FUTURE CALLS TO IOPIN
OPIL: MOVE T1,[12,,%%FXVE] ;PROTOCOL VERSION WORD
MOVEM T1,.IOLKW+0(IO) ;ZEROTH .LKWLD WORD
MOVSI T1,.IOFSB(IO) ;ADDRESS OF ADDRESS OF "FIRST" SPEC
HRRI T1,.IOFSL(IO) ;ADDRESS OF ADDRESS OF "LAST" SPEC
MOVEM T1,.IOLKW+1(IO) ;FIRST .LKWLD WORD
MOVSI T1,.I1OPN(IO) ;ADDRESS OF INPUT "OPEN" BLOCK
HRRI T1,.I1LKP(IO) ;ADDRESS OF INPUT "LOOKUP" BLOCK
MOVEM T1,.IOLKW+2(IO) ;SECOND .LKWLD WORD
MOVE T1,[.FXMAX,,.RBMAX-1] ;FSB LENGTH,,LOOKUP BLOCK LENGTH
MOVEM T1,.IOLKW+3(IO) ;THIRD .LKWLD WORD
MOVX T1,FW.ADO ;ANY DEVICE OK
HRRI T1,.IOFSC(IO) ;ADDRESS OF ADDRESS OF "CURRENT" SPEC
MOVEM T1,.IOLKW+4(IO) ;FOURTH .LKWLD WORD
MOVSI T1,0 ;NOTHING
MOVEM T1,.IOLKW+5(IO) ;FIFTH .LKWLD WORD
MOVSI T1,0 ;NOTHING
MOVEM T1,.IOLKW+6(IO) ;SIXTH .LKWLD WORD
XMOVEI T1,.IOPPN(IO) ;ADDRESS OF ON-BEHALF-OF-PPN
MOVEM T1,.IOLKW+7(IO) ;SEVENTH .LKWLD WORD
;FALL INTO LOCAL WILD INPUT LOOP
;ENTER HERE TO RETURN NEXT LOCAL INPUT FILE
OPIL10: SETZM .IOQCT(IO) ;NO IOQAT YET (IN CASE OF ERROR)
MOVSI T1,10 ;LENGTH OF .LKWLD BLOCK
HRRI T1,.IOLKW(IO) ;ADDRESS OF .LKWLD BLOCK
PUSHJ P,.LKWLD## ;GENERATE PRIMARY-WILDCARDED INPUT SPEC
JRST OPIL70 ;FAILED - SEE WHY
;IF THE FILE ACTUALLY BELONGS TO A REMOTE FILE SYSTEM THEN .LKWLD WILL HAVE
;CALLED .LKWLN.
MOVE T1,.IOCCF(IO) ;RETRIEVE COPY OF THE CHANNEL CONTROL
TXNE T1,IO.LKN!IO.OND;WAS THIS A REMOTE FILE REQUEST?
JRST OPIIR ;YES, SWITCH TO REMOTE FILE SERVICE THEN
TXNN T1,IO.NET ;LOCAL, GOT A NET CONNECTION HANGING AROUND?
JRST OPIL12 ;NO
PUSHJ P,NTZAP1## ;YES, ABORT THE NETWORK LINK
JFCL ;THIS SHOULDN'T HAPPEN
OPIL12: MOVEI T1,.IFRED ;GENERIC READ FUNCTION
SETZ T2, ;*** TEMP
PUSHJ P,FILOP ;OPEN THE POTENTIAL FILE FROM .LKWLD
JRST OPIL50 ;FILE OPEN FAILURE
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;SEE IF FILE REALLY VALID/DESIRED
PUSHJ P,.CHKTM## ;SEE IF THE FILE MATCHES
JRST OPIL67 ;IT DOESN'T, TOSS THIS ONE AND TRY FOR ANOTHER
MOVE T3,.IOIOM(IO) ;GET I/O MODE CONTROL
TXNE T3,IM.DQA!IM.DQI;OK TO CALL /QUERY PROCESSOR?
JRST OPIL20 ;NO (E.G., OUT = IN; OUT WILL CALL IOQAT)
SETZ T1, ;NO OUTPUT SIDE HERE
MOVE T2,IO ;INPUT SIDE I/O CDB
PUSHJ P,IOQAT1 ;CALL /QUERY PROCESSOR
JRST OPIL65 ;USER PROBABLY REJECTED THE FILE
;WE LIKE THIS FILE, SEE IF NEED TO ALLOCATE BUFFERS
OPIL20: MOVE T1,.IOIOM(IO) ;GET FILE MODE CONTROL WORD
TXNE T1,IM.SBO ;SUPPRESS BUFFER ALLOCATION AT OPEN?
JRST OPIL30 ;YES
PUSHJ P,FILBF ;NO, ALLOCATE BUFFERS AS NEEDED
POPJ P, ;OOPS, NO MEMORY OR SOMETHING
;ALL DONE, RETURN INPUT FILE READY TO BE READ
OPIL30: JRST .POPJ1## ;SUCCESSFUL RETURN
;SEE WHY FILOP FAILED
OPIL50: PUSHJ P,OPIE00 ;SEE IF SHOULD IGNORE THIS ERROR
JRST OPIL10 ;YES, STEP TO NEXT FILE
POPJ P, ;TAKE ERROR/EXCEPTION RETURN TO CALLER
; (WHO SHOULD CALL THE ERROR PRINTER)
;CHECK OUT EXCEPTION RETURN FROM .IOQAT
OPIL65: CAIE M0,$EFRJU ;REJECTED BY USER?
POPJ P, ;NO, SOME BIZARRE ERROR!
;HERE TO REJECT CURRENT FILE (TOSS OUT GARBAGE, ETC) AND TRY FOR ANOTHER
OPIL67: PUSHJ P,IOABO0 ;TOSS OUT CURRENTLY [ALMOST] OPENED FILE
JFCL ;DUH?
JRST OPIL10 ;AND TRY FOR ANOTHER FILE
;HERE TO SEE WHY .LKWLD FAILED (ERROR OR NO MORE INPUT FILES)
OPIL70: AOJE T1,OPII30 ;IF T1 = -1 THEN NO MORE FILES
MOVX M0,$EFNAD ;ERROR - INPUT NOT A DISK
POPJ P, ;RETURN ERROR CONDITION
;HERE FOR REMOTE FILE SYSTEM
OPIIR: TXNN T1,IO.OND ;DOING DAP-ONLY STUFF?
JRST OPIIR2 ;NO, REAL FILE THINGS
SKIPN T1,.IOFSY(IO) ;YES, GET PSEUDO-CURRENT FILE SPEC BLOCK
MOVE T1,.IOFSC(IO) ;OOPS - NONE (.LKWLN NOT CALLED), FAKE IT
MOVEM T1,.IOFSY(IO) ;SET FOR RANDOM HACKERY
SKIPN T2,.FXNOD(T1) ;GET THE NODE NAME
MOVE T2,.MYNOD## ;NONE, DEFAULT TO LOCAL NODE THEN
MOVEM T2,.FXNOD(T1) ;KEEP OPWN HAPPY
OPIIR2: PUSHJ P,OPWN ;FIRST ESTABLISH A DAPPISH LINK WITH REMOTE
JRST [SOS .CTNDF## ;DISCOUNT NODE FOUND
PUSHJ P,OPIE00 ;DOES THE USER CARE ABOUT THIS ERROR?
JRST OPIIL ;NO, IGNORE, STEP ON TO NEXT WHATEVER
MOVE T1,.IOFSY(IO) ;ADDRESS OF NETWORK FILE SPEC BLOCK
MOVE T1,.FXNOD(T1) ;NAME OF ERRANT NODE
MOVEM T1,.I1NOD(IO) ;SET SOMETHING FOR ERROR TYPEOUT
PUSHJ P,OPFND ;NOW SET .IOFND FROM .I1NOD
AOS .CTFLF## ;FAKE OUT WILD'S "LOOKED" ROUTINE
; SINCE WE ARE ABOUT TO ISSUE ERROR
; MESSAGE ANYWAY, DON'T WANT THE
; SUMMARY "% NO SUCH NODES" STUFF
POPJ P,] ;PROPAGATE ERROR BACK TO CALLER
XMOVEI T1,OPIR ;REMOTE WILD FILE INPUT SERVICE
MOVEM T1,.IOWSR(IO) ;SET FOR FUTURE CALLS TO .IOPIN
JRST OPIR03 ;START UP FILE LOOP
;HERE TO FIND THE NEXT REMOTE FILE TO READ
OPIR: MOVX T1,IO.YAF ;THE FILE-COMING FLAG
TDNN T1,.IOCCF(IO) ;CAN WE EXPECT A FILE?
JRST OPIIL ;NO, SWITCH BACK TO LOCAL MODE
ANDCAB T1,.IOCCF(IO) ;YET ANOTHER FILE EXPECTED
OPIR03: MOVE P1,FICFTB+.IFRED;GET CHANNEL I/O BITS
IORB P1,.IOCCF(IO) ;MARK THEM IN THE CDB
TXNE P1,IO.OND ;OPEN FOR DAP ONLY?
JRST .POPJ1## ;YES, SUCCESSFUL THEN
TXNN P1,IO.NET ;OUT OF CURIOUSITY, IS THE NET STILL THERE?
STOPCD <Network link disappeared in OPIR03>
SETZM .IDNMS(IO) ;NO NAME MESSAGES SEEN YET
SETZM .IOQCT(IO) ;AND NO IOQAT YET EITHER (IN CASE OF ERROR)
MOVX T1,IO.YAE ;*** FUNNY ERROR PENDING FROM -20?
TDNE T1,.IOCCF(IO) ;*** ERROR PENDING?
JRST [ANDCAM T1,.IOCCF(IO) ;*** CLEAR OUT FOR NOW
PUSHJ P,RDSTC1## ;*** RETRIEVE ERROR CODE
JFCL ;*** DUH?
JRST OPIR51] ;*** PROCESS DEFERRED FILE-OPEN ERROR
MOVX T1,IO.YAS ;YET ANOTHER SILLY BIT
TDNE T1,.IOCCF(IO) ;NEED TO CLEAN UP FROM PREVIOUS ERROR?
JRST OPIR55 ;YES, OLD FILE STILL HANGING AROUND
OPIR10: PUSHJ P,RDMSG1## ;READ IN NEXT DAP MESSAGE CODE
POPJ P, ;NETWORK DIED?
OPIR11: JSP T4,.CDISP## ;DISPATCH ON MESSAGE TYPE
OPIR20,,$DHATR ;MAIN ATTRIBUTES
OPIR20,,$DHALC ;ALLOCATION ATTRIBUTES
OPIR20,,$DHTIM ;DATE/TIME ATTRIBUTES
OPIR20,,$DHPRT ;PROTECTION ATTRIBUTES
OPIR30,,$DHNAM ;RESULTANT NAME MESSAGE
OPIR40,,$DHACK ;ACK, READY TO READ FILE
OPIR50,,$DHSTS ;STATUS, PROBABLY AN ERROR
OPIR70,,$DHACM ;ACCESS COMPLETE - NO MORE FILES
0 ;ALL OTHERS ILLEGAL
JRST .RDEOS## ;DAP MESSAGE OUT OF SEQUENCE
;RECEIVED ATTRIBUTES (OF SOME FORM)
OPIR20: PUSHJ P,RDDAP1## ;READ IN THE DAP ATTRIBUTES
POPJ P, ;NETWORK DIED?
JRST OPIR10 ;BACK FOR MORE
;HERE ON A NAME MESSAGE OF SOME FLAVOR
OPIR30: PUSHJ P,RDDAP1## ;READ IN THE NAME MESSAGE
POPJ P, ;NETWORK DIED?
PUSHJ P,DPRNM1 ;PROCESS THE NAME STRING
STOPCD <DPRNM1 failed reading resultant name string in OPIR30>
JRST OPIR10 ;BACK FOR MORE
;ACK RECEIVED, WE HAVE A FILE FOR READ
OPIR40: PUSHJ P,RDDAP1## ;EAT REST OF THE ACK
POPJ P, ;NETWORK DIED?
AOS .CTDVS## ;COUNT AS AT LEAST ONE DEVICE SEEN
AOS .CTDRS## ; AND A DIRECTORY SEEN
AOS .CTDRF## ; AND A DIRECTORY FOUND
AOS .CTFLS## ; AND A FILE SEEN
AOS .CTFLF## ; AND A FILE FOUND TOO
AOS .IODFC(IO) ;COUNT UP FILES FOR THIS ACCESS
PUSHJ P,DPIAF1 ;SET FILE ATTRIBUTES FROM DAP ATTRIBUTES
STOPCD <DPIAF failed in OPIR40>
PUSHJ P,.CHKTM## ;SEE IF THE FILE IS REALLY DESIRED
JRST OPIR67 ;NOPE
MOVE T3,.IOIOM(IO) ;GET I/O MODE CONTROL
TXNE T3,IM.DQA!IM.DQI;NEED TO CALL IOQAT?
JRST OPIR46 ;NO
SETZ T1, ;YES, NO OUTPUT FILE HERE
MOVE T2,IO ;ADDRESS OF INPUT FILE CDB
PUSHJ P,IOQAT1 ;CALL THE /QUERY PROCESSOR
JRST OPIR65 ;USER PROBABLY REJECTED THE FILE
;SET UP THE ISR(S)
OPIR46: MOVX T1,IO.OPN ;THE FILE-IS-OPEN FLAG
IORM T1,.IOCCF(IO) ;MARK IN THE CDB
MOVE P1,.IOCCF(IO) ;I/O CONTROL FLAGS
XMOVEI T1,.IOIIN## ;REMOTE INPUT INITIALIZE
TXNN P1,IO.INP ;INPUT REQUESTED?
XMOVEI T1,.IOIIE## ;NO, THEN SELECT ERROR ISR INSTEAD
MOVEM T1,.IOISR(IO) ;SET INPUT I/O SERVICE ROUTINE
XMOVEI T1,.IOOIN## ;REMOTE OUTPUT INITIALIZE
TXNN P1,IO.OUT ;OUTPUT REQUESTED?
XMOVEI T1,.IOOIE## ;NO, THEN SELECT ERROR ISR INSTEAD
MOVEM T1,.IOOSR(IO) ;SET OUTPUT I/O SERVICE ROUTINE
JRST .POPJ1## ;RETURN ALL SET UP
;Received STATUS message
OPIR50: PUSHJ P,RDSTS1## ;READ IN REST OF STATUS MESSAGE
POPJ P, ;NETWORK DIED?
OPIR51: CAIE M0,$EGOIP ;"OPERATION IN PROGRESS"
CAIN M0,$EGAOK ;"A-OK"
JRST OPIR10 ;YES, IGNORE, KEEP LOOKING FOR THE ACK
MOVEM M0,.IOERR(IO) ;SAVE THE ERROR
SKIPE .IODFC(IO) ;ANY FILES AT ALL?
JRST OPIR52 ;YES, JUST REPORT THE ERROR AS NEEDED
;No files have yet been seen, which presumably means no NAME messages
;have been received (but never NEVER underestimate the creativity of
;"their" network software), which presumably means no files are forth-
;coming under any circumstances. Fake out the error typer by providing
;the input file specification as the resultant file strings so that
;error messages look pretty.
MOVE T4,.IOFSY(IO) ;THE FILE SPEC BLOCK THAT GOT US HERE
MOVE T3,.FSDEV(T4) ;ADDRESS OF DEVICE SPEC STRING
SKIPN .IOFDV(IO) ;GOT A RESULTANT DEVICE STRING?
MOVEM T3,.IOFDV(IO) ;NO, FAKE IT WITH INPUT SPECIFICATION
MOVE T3,.FSDIR(T4) ;ADDRESS OF DIRECTORY SPEC STRING
SKIPN .IOFDR(IO) ;GOT A RESULTANT DIRECTORY STRING?
MOVEM T3,.IOFDR(IO) ;NO, FAKE IT WITH INPUT SPECIFICATION
MOVE T3,.FSNAM(T4) ;ADDRESS OF FILE NAME SPEC STRING
SKIPN .IOFNM(IO) ;GOT A RESULTANT FILE NAME STRING?
MOVEM T3,.IOFNM(IO) ;NO, FAKE IT WITH INPUT SPECIFICATION
MOVE T3,.FSEXT(T4) ;ADDRESS OF FILE TYPE SPEC STRING
SKIPN .IOFEX(IO) ;GOT A RESULTANT FILE TYPE STRING?
MOVEM T3,.IOFEX(IO) ;NO, FAKE IT WITH INPUT SPECIFICATION
MOVE T3,.FSGEN(T4) ;ADDRESS OF FILE GENERATION SPEC STRING
SKIPN .IOFGN(IO) ;GOT A RESULTANT GENERATION STRING?
MOVEM T3,.IOFGN(IO) ;NO, FAKE IT WITH INPUT SPECIFICATION
;WILD assumes life is wonderful and AOSes its .CTxxx counters before-
;hand, SOSing them back down if an error occurs. Accordingly, set the
;.CTxxx counters following WILDs lead, backing off counters based on
;the actual error (that's OPIE00's job).
AOS .CTDVS## ;COUNT UP A DEVICE SEEN
AOS .CTDRS## ;COUNT UP A DIRECTORY SEEN
AOS .CTDRF## ;COUNT UP A DIRECTORY FOUND
AOS .CTFLS## ;COUNT UP A FILE SEEN
; WILD'S LOOKED WILL NOW SAY "NO SUCH FILES"
AOS .CTFLF## ;COUNT UP A FILE FOUND
OPIR52: PUSHJ P,OPIE00 ;SHOULD WE TELL THE USER ABOUT THIS ONE?
JRST OPIR55 ;NO, EAT IT, SKIP TO NEXT FILE
AOS .CTFLF## ;ERROR MESSAGE COUNTS AS FILE FOUND . . .
MOVX T1,IO.YAF!IO.YAS;FLAG TO INTERCEPT NEXT CALL TO OPIR
IORM T1,.IOCCF(IO) ;SO CAN SEND THE "CONTINUE" CODES
POPJ P, ;PROPAGATE ERROR TO USER
;Here to skip to the next file after a file-access error
OPIR55: ANDCAM T1,.IOCCF(IO) ;CLEAR OUT THE IO.YAS FLAG
;At this point, we rather hysterically try to avoid hanging the link
;in a funny protocol state. The only state that is continuable is if
;it is a wildcarded file access, and the error is a file-specific error
;(e.g., protection failure). This is determined by the receipt of NAME
;messages (don't blame me, go read the spec!). If any name messages have
;been received, it is assumed that the remote will ALWAYS terminate the
;current access with an ACCOMP(RESPONSE) message. In all other cases the
;DAP link is simply aborted - which at least leaves the DAP protocol in
;a known state . . .
SKIPN .IODFC(IO) ;IF FILES HAVE BEEN SEEN
SKIPE .IDNMS(IO) ;ERROR SANS ANY NAME MESSAGES?
CAIA ;FILES AND/OR NAME MESSAGES!
JRST OPIR59 ;NO FILES AND NO NAME MESSAGES, GIVE UP
LDB T1,PDPEMA## ;GET JUST THE MAC CODE
CAIE T1,2 ;"UNSUPPORTED" CLASS?
CAILE T1,7 ;"FORMAT", "INVALID", "SYNC", ETC?
JRST OPIR58 ;YES, JUST GIVE UP NOW!
PUSHJ P,XDASK1## ;SKIP THIS FILE, ADVANCE TO THE NEXT
POPJ P, ;NET DIED???
;Now see if the remote is gonna cooperate with us. If we get another
;STATUS message then the link/protocol is probably lost forever, any
;other message is probably good stuff, and we slip back into the file
;processing "state".
PUSHJ P,RDMSG1## ;READ IN NEXT DAP MESSAGE CODE
POPJ P, ;OH WELL, I'M NOT TOO SURPRISED...
CAIE T2,$DHSTS ;ANOTHER STATUS?
JRST OPIR11 ;NO, ASSUME GOOD STUFF (ANOTHER FILE)
;Continued on next page
;Continued from previous page
;We now check for the various pathological cases that I have empirically
;observed are not recoverable . . . There is some slight possibility
;that this is a second valid error on the same file, but I have never
;yet seen that case . . .
PUSHJ P,RDSTS1## ;PROCESS/DECODE THE DAP STATUS MESSAGE
POPJ P, ;DUH?
;Currently the VAX doesn't like to ACCOMP(SKIP) (and I don't know what
;it does want - if anything - to continue).
LDB T1,PDPEMA## ;GET JUST THE MAC CODE
CAIE T1,2 ;"UNSUPPORTED" CLASS?
CAILE T1,7 ;"FORMAT", "INVALID", "SYNC", ETC?
JRST OPIR58 ;YES, JUST GIVE UP NOW!
;And TOPS20 seems to like the ACCOMP(SKIP), it even sends back a code
;that I can only interpret (from the protocol specification) as "OK"
;but then nothing else ever happens, and the link "hangs".
MOVD1 T2,STC ;GET THE DAP STATUS CODE (COMPLETE)
MOVD1 T3,FST ;GET THE REMOTE FILE SYSTEM TYPE
CAIN T3,$DVFT2 ;TOPS-20?
CAIE T2,000001 ;FAVORITE SCREWY TOPS-20 STATUS CODE
CAIA ;NO
JRST OPIR58 ;YES, HOPELESS, BREAK OFF NOW
;Hmmm . . . Well, assume another error, and process accordingly
JRST OPIR51 ;LOOP BACK AND PROCESS ANOTHER ERROR
;Here to break off the link, complaining to the user
OPIR58: PUSHJ P,NTZAP1## ;STOMP THE LINK INTO SUBMISSION
JFCL ;HO HUM
MOVEI M0,$EERSP ;REMOTE SCREWY PROTOCOL
POPJ P, ;EXCEPTION RETURN TO CALLER
;Here to break off the link, advancing to the next file spec (a la .LKWLD)
OPIR59: PUSHJ P,NTZAP1## ;PITCH THE NETWORK LINK
JFCL ;HO HUM
JRST OPIIL ;BACK TO NEXT FILE SPEC TO PROCESS
;HERE WHEN REMOTE FILE REJECTED BY /QUERY PROCESSOR
OPIR65: CAIE M0,$EFRJU ;REJECTED BY USER?
POPJ P, ;NO, FUNNY ERROR
SOS .CTFLF## ;YES, THEN DISCOUNT FILE SUCCESSFULLY FOUND
AOS .CTFLR## ;AND COUNT IT AS REJECTED INSTEAD
;CLOSE THE FILE AND ADVANCE TO THE NEXT ONE
OPIR67: MOVD T1,AOP ;GET FILE ACCESS OPTIONS
TFNE T1,GNG ;GO/NO-GO SET?
JRST OPIR68 ;YES
PUSHJ P,XDACL1## ;NO, PITCH THE CURRENT UNWANTED INPUT FILE
JFCL ;HOHUM
JRST OPIR10 ;TRY FOR ANOTHER FILE
OPIR68: PUSHJ P,XDASK1## ;SEND AN ACCOMP(SKIP) MESSAGE
POPJ P, ;NETWORK DIED?
JRST OPIR10 ;TRY FOR THE NEXT FILE
;HERE WHEN NO MORE REMOTE FILES
OPIR70: PUSHJ P,RDDAP1## ;EAT THE REST OF THE ACCESS COMPLETE
JFCL ;HMMM
MOVD1 T1,A2F ;GET ACCESS COMPLETE FUNCTION
CAIE T1,$DVARS ;IS IT "RESPONSE"
STOPCD <ACCESS COMPLETE not ACCOMP(RESPONSE) in OPIR70>
;*** NOW TRY TO FAKE OUT LKWLD'S LOOKED ROUTINE INTO ISSUING A MORE
;*** MEANINGFUL "NO SUCH FILES" RATHER THAN "SEARCH LIST EMPTY"
SKIPE .IODFC(IO) ;*** PROCESSED ANY FILES?
JRST OPIR73 ;*** YES
SKIPN .CTDRS## ;*** SEEN ANY DEVICES
SKIPE .CTDRS## ;*** OR DIRECTORIES?
JRST OPIR73 ;*** YES, LEAVE WELL ENOUGH ALONE THEN
AOS .CTFLS## ;*** FAKE WITH FILE SEEN, RETURN "NO SUCH FILES"
OPIR73: JRST OPIIL ;BACK FOR MORE FILE STUFF
;HERE FROM OPIR TO ESTABLISH A NEW NETWORK DAP LINK
OPWN: MOVX P1,IO.LKN!IO.YAF!IO.YAE!IO.YAS ;"STATE" CONTROL FLAGS
ANDCAB P1,.IOCCF(IO) ;UPDATE CHANNEL CONTROL FLAGS
MOVE P2,.IOFSY(IO) ;"CURRENT" FILE SPEC BLOCK ADDRESS
SKIPN T2,.FXNOD(P2) ;GET RESULTANT NODE NAME
STOPCD <No node in FSB passed from .LKWLD in OPWN>
TXNE P1,IO.NET ;TALKING TO A REMOTE NODE?
CAME T2,.ION6M(IO) ;YES, IS IT THE RIGHT ONE?
CAIA ;NEED A [NEW] DAP CHANNEL
JRST OPWN05 ;ALREADY TALKING TO THE RIGHT FAL
PUSHJ P,DPINI1 ;OPEN A DAPPISH NETWORK CONNECTION
POPJ P, ;CAN'T TALK TO REMOTE NODE
MOVE T2,.ION6M(IO) ;GET RESULTANT NODE NAME
MOVEM T2,.I1NOD(IO) ;POSITION FOR SCWLD, IOQAT, ETC.
PUSHJ P,OPFND ;SETUP .IOFND
;TALKING TO A REMOTE FAL
OPWN05: MOVE P1,FICFTB+.IFRED;GET CHANNEL I/O BITS
IORB P1,.IOCCF(IO) ;MARK THEM IN THE CDB
TXNE P1,IO.OND ;OPEN NETWORK/DAP LINK ONLY?
JRST .POPJ1## ;YES
;*** MOVE P2,.IOFSY(IO) ;RETRIEVE FILE SPEC BLOCK
;*** LDB T4,[POINTR .IOIOC(IO),IC.MOD] ;GET FILE MODE
;*** MOVE T1,.IOIOM(IO) ;GET I/O MODE CONTROL
;*** TXNE T1,IM.CMD ;DOES .IOIOC MODE OVERRIDE?
;*** JRST OPWN10 ;YES, USE AS SPECIFIED
;*** MOVEI T3,.ICDEF ;NO, SELECT "DEFAULT"
;*** LDB T2,[POINTR .FXCTL(P2),FX.DAM] ;USER-SPECIFIED /DATAMODE
;*** JUMPN T2,OPWN08 ;IF SET THEN /DATAMODE GOVERNS ACCESS
;*** LDB T2,[POINTR .FXCTL(P2),FX.IOM] ;USER-SPECIFIED /IOMODE
;*** JUMPE T2,OPWN09 ;IF NEITHER /DATAMODE NOR /IOMODE THEN DEFAULT
;***OPWN08: MOVE T3,MDMOTB(T2) ;TRANSLATE INTO INTERNAL FILE MODE
;***OPWN09: DPB T3,[POINTR .IOIOC(IO),IC.MOD] ;AND SET FOR ALL
;Continued on next page
;Continued from previous page
;NOW SETUP DAP AREAS FOR TRANSMISSION TO THE REMOTE FAL
OPWN10: PUSHJ P,DPWAF1 ;CONVERT FILE STUFF INTO DAP STUFF
STOPCD <DPWAF failed in OPWN10>
PUSHJ P,DPWAA1 ;ALSO SET ACCESS MESSAGE
STOPCD <DPWAA failed in OPWN10>
;SEND MAIN ATTRIBUTES
OPWN20: MOVEI T2,$DHATR ;MAIN ATTRIBUTES MESSAGE CODE
PUSHJ P,XDDAP1## ;SEND MAIN ATTRIBUTES
POPJ P, ;FAILED
;SEND THE FILE ACCESS MESSAGE
OPWN30: MOVEI T3,$DVARD ;READ ACCESS FUNCTION
MOVD1M T3,AFC ;SET ACCESS FUNCTION FIELD
MOVDII T3,FAC,GET ;"GET" ACCESS
MOVDM T3,FAC ;SET FILE ACCESS FIELD
MOVD T1,CNF ;GET REMOTE'S CONFIGURATION FLAGS
MOVDII T3,ADS,DMA ;ALWAYS WANT MAIN ATTRIBUTES RETURNED
TFNE T1,TEA ;IF REMOTE SUPPORTS DATE/TIME ATTRIBUTES
TFO T3,DDT ; THEN REQUEST DATE/TIME ATTRIBUTES BE RETURNED
TFNE T1,PEA ;IF REMOTE SUPPORTS PROTECTION ATTRIBUTES
TFO T3,DFP ; THEN REQUEST PROTECTION ATTRIBUTES TOO
TFNE T1,NAM ;IF REMOTE SUPPORTS NAME MESSAGES
TFO T3,DNM ; THEN REQUEST NAME SPECIFICATION BE RETURNED
; (OTHERWISE DPIA00 WILL HAVE TO "FAKE IT")
TFNE T1,N3D ;[1004] IF REMOTE SUPPORTS CONTROL OF 3/NAMES
TFO T3,DN3 ;[1004] THEN REQUEST 3-PART NAME MESSAGES
MOVE T1,.IOFSY(IO) ;ADDRESS OF FILE SPEC BLOCK
MOVE T1,.FXFLD(T1) ;GET FIELDS FLAGS
TFNN T3,DN3 ;REQUESTING 3-PART NAME MESSAGES?
TXNE T1,FX.WDV!FX.WDR!FX.WNM!FX.WEX!FX.WGN ;ANY WILDCARDS IN FILE?
TFZ T3,DNM ;YES, ALREADY GETTING LOTS OF NAME MESSAGES
;NOTE THAT WHILE KNOWN WILDCARDS WILL CAUSE APPROPRIATE NAME MESSAGES (VOL,
;DEV, NAM) TO BE SENT BACK TO US, ABSENCE OF EXPLICIT WILDCARDS DOESN'T
;MEAN IT IS NOT A WILD SPEC - REMEMBER /STR!! IT DOESN'T HURT TO GET RE-
;DUNDANT NAME MESSAGES, SO WE MAY WELL GET THEM IN SOME CASES.
MOVDM T3,ADS ;SET ACCESS DISPLAY FIELD
MOVEI T2,$DHACS ;FILE ACCESS MESSAGE CODE
PUSHJ P,XDDAP1## ;SEND FILE ACCESS MESSAGE
POPJ P, ;FAILED
;Continued on next page
;Continued from previous page
;FILE ACCESS SENT, SHOULD NOW GET FILE(S) RETURNED FROM REMOTE
OPWN50: PUSHJ P,XDFLS1## ;FLUSH OUT THE TRANSMIT BUFFER
POPJ P, ;BOATS
;NOW CLEAR OUT RESULTANT FILE INFORMATION PREPARATORY TO RECEIVING NEW FILE
;NAME/ATTRIBUTES IN OPIRXX
SETZM .IODFC(IO) ;CLEAR COUNT OF FILES FOR THIS ACCESS
SETZM .I1FLP+.FODEV(IO) ;CLEAR DEVICE NAME
SETZM .I1DEV(IO) ;CLEAR DEVICE NAME
SETZM .I1DCH(IO) ;CLEAR DEVICE CHARACTERISTICS
SETZM .I1DTY(IO) ;CLEAR DEVICE TYPE
SETZM .I1DSZ(IO) ;CLEAR DEVICE BLOCKSIZE
SETZM .I1IOS(IO) ;CLEAR DEVICE I/O STATUS
SETZM .I1PTH(IO) ;CLEAR START OF PATH BLOCK
MOVSI T3,.I1PTH(IO) ;CONCOCT
HRRI T3,.I1PTH+1(IO) ; A BLT POINTER TO
BLT T3,.I1PTH+.PTMAX-1(IO) ;CLEAR PATH BLOCK
SETZM .I1PT2(IO) ;CLEAR START OF PATH BLOCK
MOVSI T3,.I1PT2(IO) ;CONCOCT
HRRI T3,.I1PT2+1(IO) ; A BLT POINTER TO
BLT T3,.I1PT2+.PTMAX-1(IO) ;CLEAR PATH BLOCK
SETZM .I1LKP(IO) ;CLEAR START OF LOOKUP/ENTER BLOCK
MOVSI T3,.I1LKP(IO) ;CONCOCT
HRRI T3,.I1LKP+1(IO) ; A BLT POINTER TO
BLT T3,.I1LKP+.RBMAX-1(IO) ;CLEAR LOOKUP/ENTER BLOCK
SETZM .I1GEN(IO) ;CLEAR FILE GENERATION
JRST .POPJ1## ;SUCCESSFUL RETURN
;HERE FROM .LKWLD WHEN A FILE SPEC REQUEST IS IDENTIFIED AS DIRECTED
;TO A REMOTE FILE SYSTEM
;
;T1 HAS THE ADDRESS OF WILD'S INTERNAL FILE SPEC BLOCK WITH THE TARGET
;NODE SET.
.LKWLN::MOVEM T1,.IOFSY(IO) ;SAVE "CURRENT" FILE SPEC BLOCK
MOVX T2,IO.LKN ;THE LKWLN-CALLED FLAG
IORM T2,.IOCCF(IO) ;FLAG FOR OPIL TO SEE
JRST .POPJ1## ;TELL LKWLD TO SKIP-RETURN TO OPIL
;HERE ON "LOOKUP" FAILURE - CHECK FOR /OKPROT AND FRIENDS
;CALL IS:
;
; MOVE M0,<COD>
; PUSHJ P,OPIE00
; IGNORE RETURN
; MESSAGE RETURN
;
;Where <COD> is the internal error/exception code (and not FILOP.,
;NSP., etc. error codes)
;
;If the error should be ignored (e.g., a protection failure and /OKPROT
;is set) the non-skip return is taken.
;
;If an error message is needed the skip return is taken to the caller,
;who should then propagate an error return to his caller.
;
;Preserves all acs (yes, even - especially - M0)
OPIE00: PUSHJ P,.SAVE4## ;NEED SOME ACS TO PLAY WITH HERE
MOVE P1,.IOFSC(IO) ;FETCH POINTER TO CURRENT FILE SPEC BLOCK
DMOVE P2,.FXMOD(P1) ;GET /OKPROT, /OKNONE, ETC
CAIN M0,$EFPRT ;PROTECTION FAILURE?
JRST OPIE10 ;YES
CAIN M0,$EFFNF ;FILE NOT FOUND?
JRST OPIE20 ;YES
CAIE M0,$EFDNF ;DIRECTORY NOT FOUND?
CAIN M0,$EFSNF ;SUB-DIRECTORY NOT FOUND?
JRST OPIE23 ;YES, TREAT SORTA LIKE FILE NOT FOUND
CAIN M0,$EFNSD ;DEVICE NOT FOUND?
JRST OPIE26 ;YES
CAIE M0,$EFURO ;UNRECOGNIZED OBJECT/SERVER?
CAIN M0,$EFNSN ;NODE NOT FOUND?
JRST OPIE30 ;YES
CAIN M0,$EFUID ;NODE FOUND, BUT REJECTED USERID/ETC.?
JRST OPIE33 ;YES
JRST .POPJ1## ;OOPS, NEED AN ERROR MESSAGE TYPED!
;PROTECTION FAILURE
OPIE10: TXNN P2,FX.PRT ;/OKPROT SPECIFIED?
JRST .POPJ1## ;NO, ERROR MESSAGE TIME
AOS .CTFLP## ;NOTE A PROTECTION FAILURE OCCURRED
OPIE17: SOS .CTFLF## ;DISCOUNT FILE FOUND
POPJ P, ;AND OTHERWISE IGNORE THE ERROR
;FILE NOT FOUND
OPIE20: TXNE P2,FX.NOM ;/OKNONE SPECIFIED?
POPJ P, ;YES, TOTALLY IGNORE IT
SKIPN .WLDFL## ;/ERNONE, IS WILD IN THE ACT?
JRST .POPJ1## ;NO (E.G., NO WILDCARDS AND /NOSTR), ERROR
JRST OPIE17 ;YES, DEFER ERROR FOR WILD/LOOKED TO FIND
; (AND ISSUE "NO SUCH FILES" MESSAGE)
;SUB/DIRECTORY NOT FOUND
OPIE23: TXNE P2,FX.NOM ;/OKNONE SPECIFIED?
POPJ P, ;YEAH, TOTALLY IGNORE IT
SKIPN .WLDFL## ;/ERNONE, IS WILD IN THE ACT?
JRST .POPJ1## ;NO (E.G., NO WILDCARDS AND /NOSTR), ERROR
SOS .CTDRS## ;WE HAVE NEITHER SEEN
SOS .CTDRF## ; NOR FOUND A DIRECTORY AFTER ALL
SOS .CTFLS## ;ALSO DISCOUNT THE ACTUAL FILE SEEN
JRST OPIE17 ;DEFER ERROR FOR WILD/LOOKED TO FIND
;DEVICE NOT FOUND
OPIE26: TXNN P2,FX.NOM ;/OKNONE SPECIFIED?
JRST .POPJ1## ;NO, TIME FOR ERROR MESSAGE
SOS .CTDVS## ;DISCOUNT DEVICE SELECTED
POPJ P, ;DEFER ERROR
;NO SUCH NODE
OPIE30: TXNN P2,FX.NOM ;/OKNONE SPECIFIED?
JRST .POPJ1## ;NO, TYPE ERROR MESSAGE
SOS .CTNDS## ;YES, DISCOUNT NODE SEEN
POPJ P, ;IGNORE ERROR
;USERID/PASSWORD/ACCOUNT REJECTED BY REMOTE NODE
OPIE33: TXNN P2,FX.UID ;/OKUID SPECIFIED?
JRST .POPJ1## ;NO, TYPE ERROR MESSAGE
AOS .CTNDP## ;COUNT UP NODES "PROTECTED" AGAINST US
POPJ P, ;IGNORE ERROR
SUBTTL IOPOU - OPEN output file stream
;IOPOU -- CREATE OUTPUT FILE
;CALL IS:
;
; MOVX T1,<CDB>
; MOVX T2,<ICD>
; PUSHJ P,.IOPOU
; ERROR RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the I/O CDB which points to the file
;spec blocks; and <ICD> is the address of the input I/O CDB which
;was primary wildcarded and from which the output file specification
;is to be generated, or = -1 if no input spec is provided.
;
;The error return is taken if the file cannot (or should not -
;user said "NO" to /QUERY) be created.
;
;On normal return, the output file is OPEN and ready for output.
;
;Uses T1, T2, T3, T4.
ENTRY .IOPOU
INTERN IOPOU0, IOPOU1
.IOPOU: PUSHJ P,.SACIO## ;SETUP I/O
IOPOU0: PUSHJ P,.SAVE4## ;SAVE THE P ACS
IOPOU1: PUSHJ P,TSAV14## ;ALSO SAVE THE T ACS
CAIN T2,0 ;GOT AN INPUT CDB?
MOVE T2,IO ;NO, FAKE UP ONE
MOVEM T2,.IOSCD(IO) ;SAVE "INPUT" CDB
MOVE T1,.IOCCF(IO) ;GET CHANNEL CONTROL
TXNN T1,IO.OPN ;[STILL] GOT A FILE OPEN?
JRST IOPOU3 ;NO
PUSHJ P,IOABO1 ;YES, GET RID OF IT
JFCL ;OH WELL
;CLEAR OUT ANY POSSIBLY-STALE FILE INFORMATION
IOPOU3: ;[1010]
;Continued on next page
;Continued from previous page
;SETUP CALL TO .SCWLD
IOPOU5: MOVE T2,.IOSCD(IO) ;ADDRESS OF "INPUT" CDB
MOVE T4,[12,,%%FXVE] ;PROTOCOL FOR WILD
MOVEM T4,.IOSCW+0(IO) ;ZEROTH .SCWLD WORD
MOVSI T4,.IOFSC(T2) ;ADDRESS OF ADDRESS OF INPUT FILE SPEC BLOCK
HRRI T4,.IOFSB(IO) ;ADDRESS OF ADDRESS OF OUTPUT FILE SPEC BLOCK
MOVEM T4,.IOSCW+1(IO) ;FIRST .SCWLD WORD
MOVSI T4,.I1OPN(T2) ;INPUT OPEN BLOCK
HRRI T4,.I1OPN(IO) ;OUTPUT OPEN BLOCK
MOVEM T4,.IOSCW+2(IO) ;SECOND .SCWLD WORD
MOVSI T4,.I1LKP(T2) ;INPUT LOOKUP BLOCK
HRRI T4,.I1LKP(IO) ;OUTPUT ENTER BLOCK
MOVEM T4,.IOSCW+3(IO) ;THIRD .SCWLD WORD
MOVE T4,[[0,,-1],,.RBMAX-1] ;DEFAULT TYPE,,ENTER BLOCK LENGTH
MOVEM T4,.IOSCW+4(IO) ;FOURTH .SCWLD WORD
MOVEI T4,.I1PTH(IO) ;ADDRESS OF PATH BLOCK
MOVEM T4,.IOSCW+5(IO) ;FIFTH .SCWLD WORD
MOVEI T4,.IOSCF(IO) ;ADR OF SCWILD PROCESSING FLAGS (DEFAULT .FXCTL)
MOVEM T4,.IOSCW+6(IO) ;SIXTH .SCWLD WORD
MOVEI T1,SCENEV## ;/SCERROR:NEVER VALUE
DPB T1,[POINTR .IOSCF(IO),FX.SCE] ;SET DEFAULT .FXCTL
;NOW GENERATE SECONDARY-WILDCARDED FILE SPEC
MOVSI T1,7 ;LENGTH OF .SCWLD BLOCK
HRRI T1,.IOSCW(IO) ;ADDRESS OF .SCWLD BLOCK
PUSHJ P,.SCWLD## ;GENERATE OUTPUT FILE SPEC
JRST [MOVX M0,$EFISW ;ILLEGAL SECONDARY WILDCARDING
POPJ P,] ;ERROR RETURN
;*** .SCWLD RETURNS NODE NAME IN T3 FOR THE PRESENT . . .
SKIPE T1,T3 ;IF NO NODE NAME, LEAVE IT BLANK
PUSHJ P,.NDNAM## ;TRY TO MAKE SENSE OF THE NODE NAME
MOVEM T1,.I1NOD(IO) ;SAVE NODE NAME FOR THE WORLD TO SEE
MOVE T2,.IOFSB(IO) ;ADDRESS OF FIRST OUTPUT FILE SPEC BLOCK
MOVEM T2,.IOFSC(IO) ;SET AS CURRENT FILE SPEC BLOCK
MOVE T2,.IOIOM(IO) ;GET MODE CONTROL
TXNE T2,IM.DQA ;DISABLE IOQAT CALLS?
JRST OPOU12 ;YES
PUSHJ P,FILRA ;SET UP NAME STRINGS FOR QUERY PROCESSOR
JFCL ;NEVER FAILS
MOVE T1,IO ;OUTPUT SIDE CDB
MOVE T2,-T2(P) ;INPUT SIDE CDB
PUSHJ P,IOQAA1 ;HANDLE ANY /QUERY:ASK PROCESSING NEEDED
POPJ P, ;USER PROBABLY SAID "NO"
;Continued on next page
;Continued from previous page
;CREATE THE FILE
OPOU12: MOVE T2,.IOFSB(IO) ;ADDRESS OF FILE SPEC BLOCK
MOVE T2,.FXCTL(T2) ;[1007] FILE CONTROL
MOVEI T1,.IFWRT ;ASSUME SIMPLE WRITE
TXNE T2,FX.APP ;/APPEND?
MOVEI T1,.IFAPP ;YES
SKIPN T2,.I1NOD(IO) ;PICKUP NODE NAME
MOVE T2,.MYNOD## ;NONE SPECIFIED, DEFAULT TO LOCAL
CAME T2,.MYNOD## ;DESTINATION LOCAL NODE?
JRST OPOR ;NO, REMOTE CREATE
;LOCAL CREATE
SETZ T2, ;*** TEMP
PUSHJ P,FILOP ;CREATE THE OUTPUT FILE
JRST OPOU50 ;SEE WHY CREATION FAILED
;NOW HANDLE ANY QUERY:TELL PROCESSING SINCE WE NOW KNOW THE REAL FINAL
;FILE INFORMATION (ACTUAL DISK STRUCTURE, ETC.)
MOVE T1,IO ;OUTPUT SIDE CDB
MOVE T2,.IOSCD(IO) ;INPUT SIDE CDB
PUSHJ P,IOQTT1 ;HANDLE ANY /QUERY:TELL PROCESSING NEEDED
STOPCD <IOQTT failed in OPOU>
;NOW SEE IF NEED TO ALLOCATE BUFFERS
MOVE T1,.IOIOM(IO) ;GET FILE MODE CONTROL WORD
TXNE T1,IM.SBO ;SUPPRESS BUFFER ALLOCATION AT OPEN?
JRST OPOU30 ;YES
PUSHJ P,FILBF ;NO, ALLOCATE BUFFERS AS NEEDED
POPJ P, ;OOPS, NO MEMORY OR SOMETHING
;OUTPUT FILE ALL SET AND READY TO WRITE
OPOU30: JRST .POPJ1## ;WE HAVE A NEW OUTPUT FILE
;FILE CREATION ERROR
OPOU50: POPJ P, ;FOR NOW
;HERE FOR A REMOTE FILE CREATE
;HERE WITH NODE NAME IN T2
OPOR: MOVEM T1,.IOFOP(IO) ;REMEMBER CREATE/APPEND FUNCTION
MOVE T4,.IOCCF(IO) ;CHANNEL CONTROL FLAGS
TXNE T4,IO.NET ;NETWORK CHANNEL OPEN?
CAME T2,.ION6M(IO) ;YES, TALKING TO RIGHT NODE?
CAIA ;MUST OPEN [NEW] NETWORK CHANNEL
JRST OPOR03 ;ALREADY HAVE A CHANNEL TO USE
PUSHJ P,DPINI1 ;OPEN A [DAPISH] NETWORK CHANNEL
POPJ P, ;CAN'T, THEN CAN'T CREATE FILE EITHER
MOVE T2,.ION6M(IO) ;GET RESULTANT NODE NAME
MOVEM T2,.I1NOD(IO) ;AND SET IN THE NODE WORD (PARANOIA)
PUSHJ P,OPFND ;NOW SETUP .IOFND
;WE ARE TALKING TO A REMOTE FAL, PREPARE TO SEND FILE REQUEST
OPOR03: MOVE T1,.IOFOP(IO) ;FILE OPERATION
MOVE T1,FICFTB(T1) ;APPROPRIATE FLAGS TO SET
IORM T1,.IOCCF(IO) ;SET USEFUL BITS IN CDB
;***OPOR05: MOVE P2,.IOFSB(IO) ;ADDRESS OF FILE SPEC BLOCK
;*** MOVE T1,.IOIOM(IO) ;GET MODE CONTROL
;*** TXNE T1,IM.CMD ;FORCED TO USE .IOIOC?
;*** JRST OPOR10 ;DON'T SELECT MODE, USE .IOIOC AS SUPPLIED
;*** LDB T2,[POINTR .FXCTL(P2),FX.DAM] ;USER-SUPPLIED /DATAMODE
;*** JUMPN T2,OPOR08 ;IF SET THEN /DATAMODE GOVERNS ACCESS
;*** LDB T2,[POINTR .FXCTL(P2),FX.IOM] ;USER-SUPPLIED /IOMODE
;*** JUMPE T2,OPOR10 ;IF NEITHER /DATAMODE NOR /IOMODE THEN .IOIOC
;***OPOR08: MOVE T3,MDMOTB(T2) ;CONVERT TO INTERNAL MODE
;***OPOR09: DPB T3,[POINTR .IOIOC(IO),IC.MOD] ;SET INTERNAL DATA MODE
;Continued on next page
;Continued from previous page
;NOW SETUP DAP AREAS FOR TRANSMISSION TO THE REMOTE FAL
OPOR10: PUSHJ P,DPOAF1 ;CONVERT FROM FILE BLOCKS TO DAP META-JUNK
STOPCD <DPOAF failed in OPOR>
PUSHJ P,DPOAA1 ;ALSO SET THE ACCESS MESSAGE FIELDS
STOPCD <DPOAA failed in OPOR>
;SEND FILE ATTRIBUTES
OPOR20: MOVEI T2,$DHATR ;FILE ATTRIBUTES MESSAGE CODE
PUSHJ P,XDDAP1## ;SEND MAIN ATTRIBUTES MESSAGE
CAIA ;HMMM
JRST OPOR22 ;CHECK ALLOCATION ATTRIBUTES
STOPCD <Main attributes xmit failed in OPOR20>
;SEE IF ALLOCATION ATTRIBUTES NEEDED
OPOR22: MOVD T3,M11 ;ALLOCATION ATTRIBUTES MENU
TMZ T3,<ALP,AAL> ;CLEAR STUFF IN COMMON WITH MAIN ATTR
FJUMPE T3,M11,OPOR26 ;DON'T SEND IF NOTHING NEW TO SAY
MOVD T3,CNF ;GET REMOTE CONFIGURATION FLAGS
TFNN T3,AEA ;DOES REMOTE SUPPORT ALLOC ATTR?
JRST OPOR26 ;NO
MOVEI T2,$DHALC ;YES, ALLOCATION ATTRIBUTES MESSAGE CODE
PUSHJ P,XDDAP1## ;SEND ALLOCATION ATTRIBUTES MESSAGE
CAIA ;HMMM
JRST OPOR26 ;CHECK DATE/TIME ATTR
STOPCD <Allocation attributes xmit failed in OPOR22>
;SEE IF DATE/TIME ATTRIBUTES NEEDED
OPOR26: MOVD T3,M13 ;DATE/TIME ATTRIBUTES MENU
FJUMPE T3,M13,OPOR28 ;SKIP IF DATE/TIME STUFF NOT NEEDED
MOVD T3,CNF ;GET REMOTE CONFIGURATION FLAGS
TFNN T3,TEA ;CAN REMOTE HANDLE A DATE/TIME ATTR MSG?
JRST OPOR28 ;NO
MOVEI T2,$DHTIM ;YES, DATE/TIME ATTRIBUTES MESSAGE CODE
PUSHJ P,XDDAP1## ;SEND DATE/TIME ATTRIBUTES MESSAGE
CAIA ;HMMM
JRST OPOR28 ;CHECK PROTECTION ATTRIBUTES
STOPCD <Date/time attributes xmit failed in OPOR26>
;Continued on next page
;Continued from previous page
;SEE IF PROTECTION ATTRIBUTES NEEDED
OPOR28: MOVD T3,M14 ;PROTECTION ATTRIBUTES MENU
FJUMPE T3,M14,OPOR40 ;DON'T SEND IF NO PROTECTION TO SEND
MOVD T3,CNF ;GET REMOTE CONFIGURATION FLAGS
TFNN T3,PEA ;DOES REMOTE SUPPORT PROTECTION ATTR?
JRST OPOR40 ;NO
MOVEI T2,$DHPRT ;YES, PROTECTION ATTRIBUTES MESSAGE CODE
PUSHJ P,XDDAP1## ;SEND PROTECTION ATTRIBUTES MESSAGE
CAIA ;HMMM
JRST OPOR40 ;SEND THE ALL-IMPORTANT ACCESS MESSAGE
STOPCD <Protection attributes xmit failed in OPOR28>
;ATTRIBUTES SENT, NOW SEND THE ACCESS MESSAGE
OPOR40: MOVEI T3,$DVAWR ;CREATE A FILE
MOVD1M T3,AFC ;SET ACCESS FUNCTION WORD
MOVDII T3,FAC,PUT ;"PUT" ACCESS
MOVDM T3,FAC ;SET FILE ACCESS OPTIONS FIELD
MOVD T1,CNF ;GET REMOTE CONFIGURATION FLAGS
MOVDII T3,ADS,DMA ;ALWAYS WANT MAIN ATTRIBUTES RETURNED
TFNE T1,TEA ;IF THE REMOTE SUPPORTS DATE/TIME ATTRIBUTES
TFO T3,DDT ; THEN REQUEST DATE/TIME ATTR BE RETURNED
TFNE T1,PEA ;IF THE REMOTE SUPPORTS PROTECTION ATTRIBUTES
TFO T3,DFP ; THEN REQUEST PROTECTION ATTR BE RETURNED
TFNE T1,NAM ;IF THE REMOTE SUPPORTS THE NAME MESSAGE
TFO T3,DNM ; THEN REQUEST A RESULTANT NAME BE RETURNED
MOVDM T3,ADS ;SET ACCESS DISPLAY FIELD
MOVEI T2,$DHACS ;FILE ACCESS MESSAGE CODE
PUSHJ P,XDDAP1## ;SEND FILE ACCESS MESSAGE
CAIA ;HMMM
JRST OPOR50 ;WAIT FOR ACK
STOPCD <File access xmit failed in OPOR40>
;Continued on next page
;Continued from previous page
;FILE ACCESS SENT, GET RESULTANT ATTRIBUTES AND ACKNOWLEDGEMENT
OPOR50: PUSHJ P,XDFLS1## ;INSURE THAT EVERYTHING SENT
POPJ P, ;SIGH
OPOR51: PUSHJ P,RDMSG1## ;READ IN A DAP MESSAGE CODE
POPJ P, ;NETWORK MUST HAVE DIED
JSP T4,.CDISP## ;DISPATCH ON MESSAGE TYPE
OPOR52,,$DHSTS ;STATUS (ERROR - SIGH)
OPOR55,,$DHATR ;MAIN ATTRIBUTES, SLURP IT UP
OPOR55,,$DHALC ;ALLOCATION ATTRIBUTES, GET IT TOO
OPOR55,,$DHTIM ;DATE/TIME ATTRIBUTES, READ IT IN
OPOR55,,$DHPRT ;PROTECTION ATTRIBUTES, READ IT IN
OPOR57,,$DHNAM ;RESULTANT NAME, GET IT
OPOR60,,$DHACK ;ACCESS ACKNOWLEDGEMENT, WE ARE HAPPY
0 ;NO OTHER MESSAGES ACCEPTABLE
JRST .RDEOS## ;MESSAGE OUT OF SEQUENCE
;RECEIVED STATUS IN REPLY TO ACCESS, PROBABLY ERROR
OPOR52: PUSHJ P,RDSTS1## ;READ IN REST OF STATUS MESSAGE
POPJ P, ;NETWORK MUST HAVE DIED
CAIE M0,$EGOIP ;"OPERATION IN PROGRESS"
CAIN M0,$EGAOK ;"A-OK"
JRST OPOR51 ;YES (DUH?) TRY FOR THE ACK
POPJ P, ;PROPAGATE ERROR
;RESULTANT FILE INFORMATION, ABSORB IT FOR THE CALLER, IF HE CARES
OPOR55: PUSHJ P,RDDAP1## ;READ IN REST OF INFORMATION
POPJ P, ;SIGH
JRST OPOR51 ;WE WANT THAT ACK!
;RESULTANT FILE NAME, PROCESS NAME STUFF FOR IOQAT
OPOR57: PUSHJ P,RDDAP1## ;READ IN THE NAME STRING
POPJ P, ;NET DIED?
PUSHJ P,DPRNM1 ;PROCESS THE RECEIVED NAME STRING
POPJ P, ;DUH?
JRST OPOR51 ;BACK FOR THE ACK
;REMOTE ACKNOWLEDGED OUR FILE ACCESS REQUEST
OPOR60: PUSHJ P,RDDAP1## ;EAT REST OF ACK
POPJ P, ;DUH?
MOVX P1,IO.OPN ;THE FILE-IS-OPEN BIT
IORB P1,.IOCCF(IO) ;MARK THE CDB AS OWNING AN OPEN FILE
;Continued on next page
;Continued from previous page
;SETUP FILE INFORMATION TO RETURN TO USER
;*** PUSHJ P,DPIAF1 ;SETUP RETURNED ATTRIBUTES/ET AL
;*** STOPCD <DPIAF failed in OPOR60>
PUSHJ P,DPDCH1 ;*** TRANSLATE DEVICE/FILE CHARACTERISTICS
JFCL ;*** HUM
MOVEM T2,.IODCH(IO) ;*** SET CDB DEVICE/FILE CHARACTERISTICS
;SELECT THE ISRS
OPOR70: MOVE P1,.IOCCF(IO) ;I/O CONTROL FLAGS
XMOVEI T1,.IOIIN## ;REMOTE INPUT INITIALIZE
TXNN P1,IO.INP ;INPUT REQUESTED?
XMOVEI T1,.IOIIE## ;NO, THEN SELECT ERROR ISR INSTEAD
MOVEM T1,.IOISR(IO) ;SET INPUT I/O SERVICE ROUTINE
XMOVEI T1,.IOOIN## ;REMOTE OUTPUT INITIALIZE
TXNN P1,IO.OUT ;OUTPUT REQUESTED?
XMOVEI T1,.IOOIE## ;NO, THEN SELECT ERROR ISR INSTEAD
MOVEM T1,.IOOSR(IO) ;SET OUTPUT I/O SERVICE ROUTINE
;NOW HANDLE ANY QUERY:TELL PROCESSING SINCE WE NOW KNOW THE REAL FINAL
;FILE INFORMATION (ACTUAL DISK STRUCTURE, ETC.)
MOVE T1,IO ;OUTPUT SIDE CDB
MOVE T2,-T2(P) ;INPUT SIDE CDB
PUSHJ P,IOQTT1 ;HANDLE ANY /QUERY:TELL PROCESSING NEEDED
STOPCD <IOQTT failed in OPOR>
;ALL SET FOR SUBSEQUENT DATA WRITES
JRST .POPJ1## ;SUCCESSFUL RETURN
;OPFND - HELPER FOR OPXXX ROUTINES
OPFND: XMOVEI T1,FILOTO ;OUR TYPE-OUT ROUTINE
PUSHJ P,.XTYPO## ;SET NEW TYPEOUT
MOVE T1,[POINT 7,.IOSND(IO)] ;DESTINATION BYTE POINTER
MOVEM T1,.IOXTO(IO) ;SAVE IT AWAY
XMOVEI T1,.IOSND(IO) ;ADDRESS OF NODE STRING BLOCK
MOVEM T1,.IOFND(IO) ;SET IN NODE NAME POINTER LOCATION
MOVE T1,T2 ;THE NODE NAME
PUSHJ P,.TSIXN## ;TYPE SIXBIT NODE NAME
PJRST FILOTZ ;TERMINATE STRING
SUBTTL IOFDL - Delete OPEN file
;IOFDL -- DELETE CURRENTLY OPEN FILE
;Call is:
;
; MOVX T1,<CDB>
; PUSHJ P,.IOFDL
; ERROR RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the I/O CDB whose currently OPENed file
;is to be deleted.
;
;On error return the file couldn't be deleted (error code in M0). The
;file is still OPEN!
;
;On normal return the file has been deleted. In particular, the CDB
;has been CLOSEd.
;
;Uses T1, T2, T3, T4.
ENTRY .IOFDL
INTERN IOFDL0, IOFDL1
.IOFDL: PUSHJ P,.SACIO## ;SET UP IO TO POINT TO THE CDB
IOFDL0: PUSHJ P,.SAVE4## ;NEED SOME ACS HERE
IOFDL1: PUSHJ P,TSAV14## ;SAVE THE USER'S T ACS TOO
;SET UP THE TERTIARY "RENAME" BLOCK FOR FILOP
MOVX T1,.RBMAX ;SIZE OF FILE BLOCK
MOVEM T1,.I1LK3+.RBCNT(IO) ;SET IN COUNT WORD OF FILE BLOCK
SETZM .I1LK3+.RBNAM(IO) ;DELETE = BLANK NAME
;DELETE THE FILE
IOFDL5: MOVE T1,.IOCCF(IO) ;CHANNEL CONTROL
TXNE T1,IO.NET ;IS THIS A NETWORKED FILE?
JRST IONDL0 ;YES, DIFFERENT
MOVEI T1,.IFDLT ;DELETE FUNCTION
SETZ T2, ;*** TEMP
PUSHJ P,FILOP ;DELETE THE FILE
JRST IOFDL9 ;DELETE FAILED
PJRST IOCLO7 ;MARK FILE CLOSED TO ACCESS
;HERE WHEN DELETE FILOP FAILS
IOFDL9: POPJ P, ;ERROR RETURN TO THE CALLER
;HERE TO DELETE A NETWORK-BASED (REMOTE FILE SYSTEM) FILE
IONDL0: MOVEI P2,IM.CDL ;DELETE-ON-CLOSE FLAG
PJRST IONC00 ;AND "CLOSE" THE FILE
SUBTTL IOFPR - Print OPEN file (spool to lineprinter)
;IOFPR -- PRINT CURRENTLY OPEN FILE
;Call is:
;
; MOVX T1,<CDB>
; PUSHJ P,.IOFPR
; ERROR RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the I/O CDB whose currently OPENed file
;is to be printed via spooling to the lineprinter queue.
;
;IOFPR takes the file currently OPEN via the CDB and passes it (i.e.,
;the file specification) to the systemlineprinter spooler processor
;to be printed as a standard print request. The print spooler processor
;is always the file system host, not the local host.
;
;No actual file or I/O processing is performed on the file, the CDB is
;unaffected - it is used solely as a handle on the file specification
;to be submitted (but see "normal return" below).
;
;On error return the file couldn't be printed (error code in M0). The
;file is still OPEN.
;
;On normal return the file has been printed. Note also that the file
;has been CLOSEd as well (This is an artifact of the DAP protocol -
;such is life).
;
;Uses T1, T2, T3, T4.
ENTRY .IOFPR
INTERN IOFPR0, IOFPR1
.IOFPR: PUSHJ P,.SACIO## ;SET UP IO TO POINT TO THE CDB
IOFPR0: PUSHJ P,.SAVE4## ;NEED SOME ACS HERE
IOFPR1: PUSHJ P,TSAV14## ;SAVE THE USER'S T ACS TOO
;PRINT THE FILE
IOFPR5: MOVE T1,.IOCCF(IO) ;CHANNEL CONTROL
TXNE T1,IO.NET ;IS THIS A NETWORKED FILE?
JRST IONPR0 ;YES, DIFFERENT
MOVEI T2,.QUPRT ;IDENTIFY PRINT REQUEST
PUSHJ P,QUEOP1## ;ISSUE QUEUE. TO GALAXY
POPJ P, ;CAN'T DO IT
;Continued on next page
;Continued from previous page
;NOW CLOSE THE FILE (BE "COMPATIBLE" WITH DAP/REMOTE ACCESS - SIGH)
MOVE P2,.IOIOM(IO) ;LOAD MODE CONTROL FOR IOCLO ROUTINES
TXZ P2,IM.CXX ;NO CLOSE-TIME OPTIONS HERE!
PUSHJ P,IOCLO3 ;NOW REALLY "CLOSE" THE FILE
CAIA ;DUH?
JRST .POPJ1## ;SUCCESSFUL RETURN
PUSHJ P,IOABO1 ;BLAST THE RECALCITRANT THING
JFCL ;DOUBLE-DUH?
JRST .POPJ1## ;SUCCESSFUL (MAYBE) RETURN
;HERE TO PRINT A NETWORK-BASED (REMOTE FILE SYSTEM) FILE
IONPR0: MOVX P2,IM.CPR ;PRINT-ON-CLOSE FLAG
PJRST IONC00 ;GO "CLOSE" THE FILE
SUBTTL IOFRN - Rename OPEN file
;IOFRN -- RENAME OPEN FILE
;Call is:
;
; MOVX T1,<CDB>
; PUSHJ P,.IOFRN
; ERROR RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the I/O CDB containing the already OPEN
;file to be RENAMEd, and both the input file spec blocks and the tertiary
;"output" file spec blocks.
;
;On error return either the file couldn't be renamed or the user rejected
;the file via /QUERY:ASK.
;
;On normal return the file has been RENAMEd to the new specification and
;CLOSEd to further access.
;
;Uses T1, T2, T3, T4.
ENTRY .IOFRN
INTERN IOFRN0, IOFRN1
.IOFRN: PUSHJ P,.SACIO## ;SETUP I/O
IOFRN0: PUSHJ P,.SAVE4## ;SAVE THE P ACS
IOFRN1: PUSHJ P,TSAV14## ;ALSO SAVE THE T ACS
;SETUP CALL TO .SCWLD
MOVE T4,[12,,%%FXVE] ;SCAN/WILD PROTOCOL VERSION WORD
MOVEM T4,.IOSCW+0(IO) ;ZEROTH .SCWLD WORD
MOVSI T4,.IOFSC(IO) ;ADDRESS OF ADDRESS OF INPUT FILE SPEC BLOCK
HRRI T4,.IOFS3(IO) ;ADDRESS OF ADDRESS OF OUTPUT FILE SPEC BLOCK
MOVEM T4,.IOSCW+1(IO) ;FIRST .SCWLD WORD
MOVSI T4,.I1OPN(IO) ;INPUT OPEN BLOCK
HRRI T4,.I1OP3(IO) ;OUTPUT OPEN BLOCK
MOVEM T4,.IOSCW+2(IO) ;SECOND .SCWLD WORD
MOVSI T4,.I1LKP(IO) ;INPUT LOOKUP BLOCK
HRRI T4,.I1LK3(IO) ;OUTPUT ENTER BLOCK
MOVEM T4,.IOSCW+3(IO) ;THIRD .SCWLD WORD
MOVE T4,[[0,,-1],,.RBMAX-1] ;DEFAULT TYPE,,ENTER BLOCK LENGTH
MOVEM T4,.IOSCW+4(IO) ;FOURTH .SCWLD WORD
MOVSI T4,0 ;NOTHING YET
HRRI T4,.IOSCF(IO) ;SCWILD PROCESSING FLAGS
MOVEM T4,.IOSCW+5(IO) ;FIFTH .SCWLD WORD
SETZM .IOSCF(IO) ;SET OK TOO MANY INPUT WILDCARDS
MOVEI T1,.I1PT3(IO) ;ADDRESS OF PATH BLOCK
MOVEM T1,.I1LK3+.RBPPN(IO) ;SET PATH BLOCK TO USE
;Continued on next page
;Continued from previous page
;NOW GENERATE SECONDARY-WILDCARDED FILE SPEC
MOVSI T1,6 ;LENGTH OF .SCWLD BLOCK
HRRI T1,.IOSCW(IO) ;ADDRESS OF .SCWLD BLOCK
PUSHJ P,.SCWLD## ;GENERATE OUTPUT FILE SPEC
JRST [MOVX M0,$EFISW ;ILLEGAL SECONDARY WILDCARDING
POPJ P,] ;ERROR RETURN
JUMPE T3,IOFRN3 ;NO NODE IS NO CHANGE IN THE NODE
CAME T3,.I1NOD(IO) ;IS NEW NODE THE SAME AS OLD NODE?
STOPCD <Can't RENAME to a new node in IOFRN>
IOFRN3: MOVE P1,.IOCCF(IO) ;CHANNEL CONTROL
TXNE P1,IO.NET ;LOCAL OR REMOTE FILE SERVICE?
JRST IORRN0 ;REMOTE, DIFFERENT CODE!
;CHECK /QUERY
IOFRN4: PUSHJ P,FILTA ;GENERATE THE TERTIARY STRINGS
JFCL ;DUH?
MOVE T1,.IOFS3(IO) ;ADDRESS OF FIRST OUTPUT FILE SPEC BLOCK
MOVEM T1,.IOCU3(IO) ;SET AS CURRENT FILE SPEC BLOCK
MOVE T1,.IOIOM(IO) ;GET IO MODE CONTROL
TXNE T1,IM.DQA ;DISABLE IOQAT CALLS?
JRST IOFRN5 ;YES
SETO T1, ;OUTPUT SIDE IS ACTUALLY "TERTIARY" INPUT
MOVE T2,IO ;INPUT SIDE CDB
PUSHJ P,IOQAT1 ;HANDLE ANY /QUERY PROCESSING NEEDED
POPJ P, ;USER PROBABLY SAID "NO"
;RENAME THE FILE
IOFRN5: MOVEI T1,.IFRNM ;"RENAME" FILE OPERATION
SETZ T2, ;*** TEMP
MOVE P4,.IOFS3(IO) ;ADDRESS OF "OUTPUT" FSB
EXCH P4,.IOFSC(IO) ;SET AS "CURRENT" FSB FOR FLPA TO SEE
PUSHJ P,FILOP ;RENAME THE OUTPUT FILE
JRST [MOVEM P4,.IOFSC(IO) ;RESTORE "INPUT" FSB ADDRESS
JRST IOFRN9] ;RENAME FAILED
MOVEM P4,.IOFSC(IO) ;RESTORE "INPUT" FSB ADDRESS
PUSHJ P,IOCLO0 ;CLOSE OFF ACCESS TO THE FILE
JFCL ;HMMM
JRST .POPJ1## ;THE RENAME SUCCEEDED, TELL CALLER
;HERE WHEN THE RENAME FILOP FAILS
IOFRN9: POPJ P, ;PASS ERROR TO CALLER
;HERE TO RENAME A NETWORKED (REMOTE FILE SYSTEM) FILE
IORRN0: MOVD T1,CNF ;REMOTE'S CONFIG FLAGS
TFNN T1,CFN ;SUPPORT ACCOMP(RENAME)?
JRST [MOVEI M0,$EFRNA ;NO REMOTE ACCOMP(RENAME) SUPPORT
POPJ P,] ;AND THAT IS THE END OF THAT
MOVE T1,.IOFS3(IO) ;ADDRESS OF FIRST OUTPUT FILE SPEC BLOCK
MOVEM T1,.IOCU3(IO) ;SET AS CURRENT FILE SPEC BLOCK
PUSHJ P,DPOTN1 ;SETUP TERTIARY NAME MESSAGE FIELDS
POPJ P, ;ILLEGAL SOMETHING OR OTHER
MOVE P4,.IOCU3(IO) ;ADDRESS OF "OUTPUT" FILE SPEC BLOCK
EXCH P4,.IOFSC(IO) ;SET IT AS "THE CURRENT" FILE SPEC BLOCK
PUSHJ P,DPOAF0 ;AND SET ANY FILE ATTRIBUTES SPECIFIED
JRST [MOVEM P4,.IOFSC(IO) ;RESTORE PROPER "INPUT" FILE SPEC BLOCK
POPJ P,] ;PROPAGATE ERROR RETURN
MOVEM P4,.IOFSC(IO) ;RESTORE PROPER "INPUT" FILE SPEC BLOCK
;FIRST CHECK FOR ANY /QUERY PROCESSING
IORRN4: MOVE T1,.IOIOM(IO) ;GET IO MODE CONTROL
TXNE T1,IM.DQA ;DISABLE IOQAT CALLS?
JRST IORR01 ;YES
SETO T1, ;OUTPUT SIDE IS ACTUALLY "TERTIARY" INPUT
MOVE T2,IO ;INPUT SIDE CDB
PUSHJ P,IOQAT1 ;HANDLE ANY /QUERY PROCESSING NEEDED
POPJ P, ;USER PROBABLY SAID "NO"
;SHIP THE RENAME INFO TO THE REMOTE
IORR01: PUSHJ P,IOCLP1 ;BUILD MASK OF CLOSE-TIME OPTIONS
POPJ P, ;THIS CAN'T FAIL!
PUSHJ P,IOCLQ1 ;CONVERT MASK INTO AFO MASK
POPJ P, ;THIS ALSO SHOULDN'T FAIL
MOVDM T1,AFO ;SET ANY CLOSE-TIME ACCOMP OPTIONS
MOVDII P3,M07,A2F ;ALWAYS SEND ACCOMP FUNCTION FIELD
FJUMPE T1,AFO,IORR04 ;ANY OPTIONS TO SET?
TMO P3,AFO ;YUP, FLAG THEM TO BE SENT TOO
IORR04: MOVDM P3,M07 ;SET ACCOMP [HIDDEN] MENU FIELD
MOVEI T1,$DVACB ;ACCOMP(CHANGE-BEGIN) (RENAME) FUNCTION
MOVDM T1,A2F ;SET IN DAP MESSAGE BLOCK
MOVEI T2,$DHACM ;DAP ACCOMP MESSAGE TYPE
PUSHJ P,XDDAP1## ;FIRE OFF ACCOMP(CHANGE-BEGIN)
POPJ P, ;NET DIED?
;Continued on next page
;Continued from previous page
;NOW ALL THE ATTRIBUTES/ETC.
IORR10: MOVD T1,CNF ;GET REMOTE CONFIGURATION
IORR11: TFNN T1,CFA ;SUPPORT ACCOMP(RENAME/ATTR)?
JRST IORR12 ;NO
MOVEI T2,$DHATR ;YES, ATTRIBUTES MESSAGE TYPE
PUSHJ P,XDDAP1## ;FIRE OFF AN ATTRIBUTES MESSAGE
POPJ P, ;NET DIED?
IORR12: MOVD T1,CNF ;THE CONFIG AGAIN
IORR13: TFNN T1,CFD ;SUPPORT ACCOMP(RENAME/DATETIME)?
JRST IORR14 ;NO
MOVEI T2,$DHTIM ;YES, DATE/TIME ATTRIBUTES MESSAGE CODE
PUSHJ P,XDDAP1## ;FIRE OFF DATE/TIME ATTRIBUTES MESSAGE
POPJ P, ;NET DIED?
IORR14: MOVD T1,CNF ;THE CONFIG YET AGAIN
IORR15: TFNN T1,CFP ;SUPPORT ACCOMP(RENAME/PROTECTION)?
JRST IORR16 ;NO
MOVEI T2,$DHPRT ;YES, PROTECTION ATTRIBUTES MESSAGE CODE
PUSHJ P,XDDAP1## ;FIRE OFF PROTECTION ATTRIBUTES MESSAGE
POPJ P, ;NET DIED
IORR16: MOVEI T2,$DHNAM ;NAME MESSAGE CODE
PUSHJ P,XDDAP1## ;FIRE OFF NAME MESSAGE
POPJ P, ;NET DIED?
MOVEI T1,$DVACE ;ACCOMP(CHANGE-END) FUNCTION
MOVD1M T1,A2F ;SET IN MESSAGE BLOCK
MOVEI T2,$DHACM ;ACCOMP MESSAGE TYPE AGAIN
PUSHJ P,XDDAP1## ;TERMINATE THE ACCOMP(RENAME) SEQUENCE
; (KEEPING AFO AS SPECIFIED ABOVE)
POPJ P, ;NET DIED?
;FLUSH OUT DATA AND GET REMOTE'S RESPONSE
PJRST IONC29 ;COMMON CODE FROM HERE ON OUT . . .
SUBTTL IOFSU - Submit OPEN file (to batch processor)
;IOFSU -- SUBMIT CURRENTLY OPEN FILE
;Call is:
;
; MOVX T1,<CDB>
; PUSHJ P,.IOFSU
; ERROR RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the I/O CDB whose currently OPENed file
;is to be submitted to the batch processing system.
;
;IOFSU submits the file currently OPEN via the CDB and passes it (i.e.,
;the file specification) to the system batch processor to be run as
;a standard batch job. The batch processor host is always the file system
;host processor, not the local host.
;
;No actual file or I/O processing is performed on the file, the CDB is
;unaffected - it is used solely as a handle on the file specification
;to be submitted.
;
;On error return the file couldn't be submitted. The file is still OPEN.
;
;On normal return the file has been submitted. Note also that the file
;has been CLOSED!
;
;Uses T1, T2, T3, T4.
ENTRY .IOFSU
INTERN IOFSU0, IOFSU1
.IOFSU: PUSHJ P,.SACIO## ;SET UP IO TO POINT TO THE CDB
IOFSU0: PUSHJ P,.SAVE4## ;NEED SOME ACS HERE
IOFSU1: PUSHJ P,TSAV14## ;SAVE THE USER'S T ACS TOO
;SUBMIT THE FILE
IOFSU5: MOVE T1,.IOCCF(IO) ;CHANNEL CONTROL
TXNE T1,IO.NET ;IS THIS A NETWORKED FILE?
JRST IONSB0 ;YES, DIFFERENT
MOVEI T2,.QUBAT ;IDENTIFY BATCH REQUEST
PUSHJ P,QUEOP1## ;ISSUE QUEUE. TO GALAXY
POPJ P, ;CAN'T DO IT
;Continued on next page
;Continued from previous page
;NOW CLOSE THE FILE (BE "COMPATIBLE" WITH DAP/REMOTE ACCESS - SIGH)
MOVE P2,.IOIOM(IO) ;LOAD MODE CONTROL FOR IOCLO ROUTINES
TXZ P2,IM.CXX ;NO CLOSE-TIME OPTIONS HERE!
PUSHJ P,IOCLO3 ;NOW REALLY "CLOSE" THE FILE
CAIA ;DUH?
JRST .POPJ1## ;SUCCESSFUL RETURN
PUSHJ P,IOABO1 ;BLAST THE RECALCITRANT THING
JFCL ;DOUBLE-DUH?
JRST .POPJ1## ;SUCCESSFUL (MAYBE) RETURN
;HERE TO SUBMIT A NETWORK-BASED (REMOTE FILE SYSTEM) FILE
IONSB0: MOVX P2,IM.CSU ;SUBMIT-ON-CLOSE FLAG
PJRST IONC00 ;GO "CLOSE" THE FILE
SUBTTL IODDE - DAP-mode file delete operation
;IODDE -- DAP-MODE DELETE
;Call is:
;
; MOVX T1,<CDB>
; MOVX T2,<RTN>
; PUSHJ P,.IODDE
; ERROR RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the controlling I/O CDB; and <RTN> is
;the address of a processing routine to be called for each file
;processed (deleted) by the remote DAP (FAL) process.
;
;On error return, the network died, or the remote doesn't support the
;requested access (e.g., /QUERY:ASK), etc. An error code is in M0.
;
;On normal return the specified file(s) (as indicated by the file spec
;block (.IOFSB) pointer) have been deleted.
ENTRY .IODDE
INTERN IODDE0, IODDE1
.IODDE: PUSHJ P,.SACIO ;SETUP CDB CONTEXT
IODDE0: PUSHJ P,.SAVE4## ;SAVE THE P'S TOO
IODDE1: CAIN T2,0 ;GOT A PROCESSING ROUTINE?
XMOVEI T2,.POPJ1## ;NO, SUPPLY A DEFAULT
CAIN T3,0 ;GOT AN ERROR PROCESSOR?
XMOVEI T3,.POPJ## ;NO, SUPPLY A DEFAULT
PUSHJ P,TSAV13## ;SAVE IT FOR LATER
MOVEI T1,0 ;DAP "DELETE" FUNCTION
PJRST IODX00 ;GO DO THE DAP-MODE FILE OPERATION
SUBTTL IODDI - DAP-mode file directory list operation
;IODDI -- DAP-MODE DIRECTORY
;Call is:
;
; MOVX T1,<CDB>
; MOVX T2,<RTN>
; PUSHJ P,.IODDI
; ERROR RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the controlling I/O CDB; and <RTN> is
;the address of a processing routine to be called for each file
;processed (listed) by the remote DAP (FAL) process.
;
;On error return, the network died, or the remote doesn't support the
;requested access (e.g., /QUERY:ASK), etc. An error code is in M0.
;
;On normal return the specified file(s) (as indicated by the file spec
;block (.IOFSB) pointer) have been "directory'ed".
ENTRY .IODDI
INTERN IODDI0, IODDI1
.IODDI: PUSHJ P,.SACIO ;SETUP CDB CONTEXT
IODDI0: PUSHJ P,.SAVE4## ;SAVE THE P'S TOO
IODDI1: CAIN T2,0 ;GOT A PROCESSING ROUTINE?
XMOVEI T2,.POPJ1## ;NO, SUPPLY A DEFAULT
CAIN T3,0 ;GOT AN ERROR PROCESSOR?
XMOVEI T3,.POPJ## ;NO, SUPPLY A DEFAULT
PUSHJ P,TSAV13## ;SAVE IT FOR LATER
MOVEI T1,2 ;DAP "DIRECTORY" FUNCTION
PJRST IODX00 ;GO DO THE DAP-MODE FILE OPERATION
SUBTTL IODRN - DAP-mode file rename operation
;IODRN -- DAP-MODE RENAME
;Call is:
;
; MOVX T1,<CDB>
; MOVX T2,<RTN>
; PUSHJ P,.IODRN
; ERROR RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the controlling I/O CDB; and <RTN> is
;the address of a processing routine to be called for each file
;processed (renamed) by the remote DAP (FAL) process.
;
;On error return, the network died, or the remote doesn't support the
;requested access (e.g., /QUERY:ASK), etc. An error code is in M0.
;
;On normal return the specified file(s) (as indicated by the file spec
;block (.IOFSB) pointer) have been renamed.
ENTRY .IODRN
INTERN IODRN0, IODRN1
.IODRN: PUSHJ P,.SACIO ;SETUP CDB CONTEXT
IODRN0: PUSHJ P,.SAVE4## ;SAVE THE P'S TOO
IODRN1: CAIN T2,0 ;GOT A PROCESSING ROUTINE?
XMOVEI T2,.POPJ1## ;NO, SUPPLY A DEFAULT
CAIN T3,0 ;GOT AN ERROR PROCESSOR?
XMOVEI T3,.POPJ## ;NO, SUPPLY A DEFAULT
PUSHJ P,TSAV13## ;SAVE IT FOR LATER
MOVNI T1,1 ;DAP "RENAME" FUNCTION
PJRST IODX00 ;GO DO THE DAP-MODE FILE OPERATION
SUBTTL IODEX - DAP-mode file execute operation
;IODEX -- DAP-MODE EXECUTE
;Call is:
;
; MOVX T1,<CDB>
; MOVX T2,<RTN>
; PUSHJ P,.IODEX
; ERROR RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the controlling I/O CDB; and <RTN> is
;the address of a processing routine to be called for each file
;processed (executed) by the remote DAP (FAL) process.
;
;On error return, the network died, or the remote doesn't support the
;requested access (e.g., /QUERY:ASK), etc. An error code is in M0.
;
;On normal return the specified file(s) (as indicated by the file spec
;block (.IOFSB) pointer) have been executed.
ENTRY .IODEX
INTERN IODEX0, IODEX1
.IODEX: PUSHJ P,.SACIO ;SETUP CDB CONTEXT
IODEX0: PUSHJ P,.SAVE4## ;SAVE THE P'S TOO
IODEX1: CAIN T2,0 ;GOT A PROCESSING ROUTINE?
XMOVEI T2,.POPJ1## ;NO, SUPPLY A DEFAULT
CAIN T3,0 ;GOT AN ERROR PROCESSOR?
XMOVEI T3,.POPJ## ;NO, SUPPLY A DEFAULT
PUSHJ P,TSAV13## ;SAVE IT FOR LATER
MOVEI T1,1 ;DAP "EXECUTE" FUNCTION
PJRST IODX00 ;GO DO THE DAP-MODE FILE OPERATION
SUBTTL DAP-mode file operations
;IODXnn - MAIN BODY OF .IODDE, .IODDI, .IODRN, .IODEX
;
;Call with "function" in T1
;
; -1 = RENAME
; 00 = DELETE
; 01 = EXECUTE
; 02 = DIRECTORY LIST
IODX00: MOVEM T1,.I1FLP(IO) ;HANG ON TO "FUNCTION"
MOVE T1,.IOFSB(IO) ;ADDRESS OF PRIMARY FILE SPEC BLOCK
MOVEM T1,.IOFSC(IO) ;MAKE IOQAT HAPPY
MOVEM T1,.IOFSY(IO) ;MAKE DPWAA HAPPY
MOVE T2,.FXNOD(T1) ;GET REMOTE NODE
PUSHJ P,DPINI1 ;ESTABLISH A DAP LINK
POPJ P, ;CAN'T
MOVE T2,.ION6M(IO) ;GET RESULTANT NODE NAME
MOVEM T2,.I1NOD(IO) ;POSITION FOR SCWLD, IOQAT, ETC.
PUSHJ P,OPFND ;SETUP .IOFND
;CHECK FOR FILE CONSTRAINT SWITCHES (/BEFORE, ETC)
MOVE P1,.IOFSC(IO) ;ADDRESS OF "CURRENT" FILE SPEC BLOCK
HRRZI T3,.FXBOM(P1) ;ADDRESS OF FILE-CONSTRAINTS SWITCHES
HRLI T3,-<.FXFLM-.FXBOM> ;LENGTH OF CONSTRAINTS
SETO T4, ;NO-VALUE VALUE
CAMN T4,0(T3) ;FILE-CONSTRAINT SPECIFIED?
AOBJN T3,.-1 ;NO, CHECK REST OF THEM
JUMPL T3,IODXE0 ;ERROR IF FILE CONSTRAINT SPECIFIED
;*** SMARTEN THIS UP FOR -10S??
;Continued on next page
;Continued from previous page
;SETUP FILE SPECIFICATION FIELD(S)
PUSHJ P,DPWAA1 ;SETUP THE FILESPEC ET AL IN THE ACCESS MESSAGE
POPJ P, ;DIED
SKIPL .I1FLP(IO) ;NEED ANOTHER FILE SPEC (E.G., RENAME)?
JRST IODX03 ;NO
PUSHJ P,DPWAN1 ;YES, SETUP SECONDARY NAME SPEC TOO
POPJ P, ;DIED??
;SETUP ACCESS MESSAGE FUNCTION CODE FIELD
IODX03: MOVE P1,.IOFSC(IO) ;ADDRESS OF "CURRENT" FILE SPEC BLOCK
MOVE P2,.I1FLP(IO) ;RETRIEVE "FUNCTION" CODE
ADDI P2,1 ;MAKE NON-ZERO INDEX
MOVD T3,CNF ;REMOTE CONFIGURATION FLAGS
XCT IODXTC(P2) ;DOES REMOTE SUPPORT REQUESTED OPERATION?
JRST [XCT IODXTE(P2) ;NO, FETCH ERROR CODE
POPJ P,] ;TAKE ERROR RETURN
XCT IODXTF(P2) ;GET APPROPRIATE DAP ACCESS FUNCTION CODE
MOVD1M T1,AFC ;SET ACCESS FUNCTION FIELD
;SETUP ACCESS MESSAGE OPTIONS FIELD
SETZB T1,T2 ;INITIALLY NO FLAGS
MOVE M0,.FXCTL(P1) ;CONTROL SWITCHES
TXNN M0,FX.QRA ;/QUERY:ASK SPECIFIED?
JRST IODX04 ;NO
TFNN T3,CGN ;YES, DOES REMOTE SUPPORT GO/NOGO?
JRST IODXE2 ;NO REMOTE GO/NOGO SUPPORT
TFO T1,GNG ;YES, NEED GO/NOGO OPTION
IODX04: MOVDM T1,AOP ;SET ACCESS OPTIONS
;SETUP ACCESS MESSAGE FILE AND SHARED ACCESS FIELDS (CLEARED)
SETZB T1,T2 ;INITIALLY NO FLAGS
MOVDM T1,FAC ;CLEAR OUT FILE ACCESS
MOVDM T1,SHR ;AND SHARED ACCESS FIELDS
;Continued on next page
;Continued from previous page
;SETUP ACCESS MESSAGE RETURNED DISPLAY FIELD
IODX10: MOVDII T1,ADS,<DMA> ;ALWAYS ASK FOR MAIN ATTRIBUTES
MOVE M0,.FXFLD(P1) ;FIELDS-FLAGS
TXNN M0,FX.WDV!FX.WDR!FX.WNM!FX.WEX!FX.WGN ;WILDCARDS?
JRST IODX12 ;NO EXPLICIT WILDCARDS
XCT IODXTW(P2) ;WE NEED WILDCARDS - DOES REMOTE HAVE THEM?
JRST IODXE1 ;NO REMOTE WILDCARD SUPPORT
TFO T1,DN3 ;REQUEST 3-PART NAME MESSAGES (WILDCARDED)
JRST IODX13 ;CHECK FOR REST OF ATTRIBUTES
IODX12: TFNE T3,NAM ;IF REMOTE SUPPORTS NAME MESSAGES
TFO T1,DNM ; ASK FOR RESULTANT FILE SPEC (NON-WILDCARDED)
IODX13: TFNE T3,TEA ;IF REMOTE SUPPORTS DATE/TIME ATTRIBUTES
TFO T1,DDT ; ASK FOR DATE/TIME ATTRIBUTES
TFNE T3,PEA ;IF REMOTE SUPPORTS PROTECTION ATTRIBUTES
TFO T1,DFP ; ASK FOR FILE PROTECTION ATTRIBUTES
MOVE M0,.IODPV(IO) ;GET REMOTE PROTOCOL LEVEL
CAIGE M0,007000 ;IMPLEMENTATIONS BEFORE VERSION 7.0
TFZ T1,DN3 ; FORCE 3-PART NAMES ON THEIR OWN
TFNE T3,NAM ;IF REMOTE DOESN'T SUPPORT RESULTANT NAME MSG
CAIGE M0,005006 ;IMPLEMENTATIONS BEFORE VERSION 5.6
SETZB T1,T2 ; PRETTY MUCH IGNORE THE DISPLAY FIELD
MOVDM T1,ADS ;SET RETURN "DISPLAY" REQUESTED
;ALL SET, SEND ACCESS MESSAGE TO THE REMOTE
MOVEI T2,$DHACS ;ACCESS MESSAGE CODE
PUSHJ P,XDDAP1## ;SEND ACCESS MESSAGE
STOPCD <File access xmit failed in IODX00>
SKIPL .I1FLP(IO) ;NEED SECOND FILE SPEC (E.G., RENAME)?
JRST IODX19 ;NO
MOVEI T2,$DHNAM ;YES, NEED A NAME MESSAGE TOO
PUSHJ P,XDDAP1## ;SEND SECONDARY NAME MESSAGE
STOPCD <Secondary name xmit failed in IODX00>
IODX19: PUSHJ P,XDFLS1## ;FORCE OUT REQUEST
POPJ P, ;NETWORK DIED?
;Continued on next page
;Continued from previous page
;LOOP RECEIVING COMPLETE FILES
IODX29: SETZM .IOFNM(IO) ;FLAG FILE NOT YET PROCESSED
SETZM .IOQCT(IO) ;NO ACTIVITY YET FOR THIS "FILE"
;NOW LOOP RECEIVING NAME MESSAGES AND ATTRIBUTES
IODX30: PUSHJ P,RDMSG1## ;START UP A NEW DAP INPUT MESSAGE
POPJ P, ;NET MUST HAVE DIED
IODX31: JSP T4,.CDISP## ;DISPATCH ON MESSAGE TYPE
IODX33,,$DHSTS ;STATUS, PROBABLY SOME SORT OF ERROR
IODX35,,$DHNAM ;RESULTANT NAME MESSAGE (SUCCESSFUL FILE)
IODX37,,$DHATR ;MAIN ATTRIBUTES
IODX37,,$DHALC ;ALLOCATION ATTRIBUTES
IODX37,,$DHTIM ;DATE/TIME ATTRIBUTES
IODX37,,$DHPRT ;PROTECTION ATTRIBUTES
IODX51,,$DHACK ;ACK, THIS FILE COMPLETE
IODX70,,$DHACM ;ACCOMP, ALL DONE
0 ;ALL OTHERS ILLEGAL
JRST .RDEOS## ;DAP MESSAGE OUT OF SEQUENCE
;RECEIVED STATUS
IODX33: PUSHJ P,RDSTS1## ;READ IN THE STATUS
POPJ P, ;DUH?
CAIE M0,$EGOIP ;"OPERATION IN PROGRESS"?
CAIN M0,$EGAOK ;"A-OK"?
JRST IODX30 ;YES, JUST IGNORE
;***
PUSHJ P,ERMSX1## ;COMPLAIN ABOUT THE ERROR
JFCL ;IGNORE
MOVD1 T1,STC ;GET DAP STATUS CODE
CAIE T1,40000+$DSFNF ;"FILE NOT FOUND"?
CAIN T1,50000+$DSFNF ;"FILE NOT FOUND"?
JRST IODX77 ;YES, AWFUL CASE
PUSHJ P,XDCSK0## ;SEND A CONTROL(SKIP)
POPJ P, ;NET DIED
PUSHJ P,XDFLS0## ;FLUSH OUT THE CONTROL MESSAGE
POPJ P, ;NET DIED
JRST IODX29 ;CONTINUE WITH ANY FURTHER FILES
;Continued on next page
;Continued from previous page
;RECEIVED NAME MESSAGE
IODX35: SKIPE .IOFNM(IO) ;GOT A NAME STILL "PENDING"?
JRST IODX50 ;YES, THEN END OF PREVIOUS FILE
PUSHJ P,RDDAP1## ;READ IN REST OF NAME MESSAGE
POPJ P, ;NETWORK DIED
PUSHJ P,DPRNM1 ;PROCESS THE RECEIVED NAME
POPJ P, ;NETWORK DIED
JRST IODX30 ;BACK FOR MORE (LOOP TILL ACK)
;RECEIVED ATTRIBUTES
IODX37: PUSHJ P,RDDAP1## ;READ IN THE REST OF THE ATTRIBUTES
POPJ P, ;NETWORK MUST HAVE DIED
JRST IODX30 ;BACK FOR MORE (LOOP TILL ACK)
;RECEIVED ACK, TIME TO PROCESS ONE FILE
IODX50: PUSHJ P,RDMSR1## ;RE-EAT THE NAME MESSAGE
STOPCD <RDMSR failed in IODX50>
JRST IODX52 ;AND PROCESS THE CURRENT FILE
IODX51: PUSHJ P,RDDAP1## ;PROCESS THE RECEIVED ACK
POPJ P, ;OOPS
IODX52: PUSHJ P,DPIAF1 ;SETUP WHAT ATTRIBUTES ARE MEANINGFUL
STOPCD <DPIAF failed in IODX50>
MOVE T3,.IOIOM(IO) ;GET I/O MODE CONTROL
TXNE T3,IM.DQA ;WANT TO SKIP IOQAT?
JRST IODX55 ;YES
SETZ T1, ;NO OUTPUT FILE HERE
MOVE T2,IO ;ADDRESS OF INPUT FILE CDB
PUSHJ P,IOQAT1 ;CALL THE /QUERY PROCESSOR
JRST IODX59 ;USER PROBABLY REJECTED THE FILE
IODX55: MOVD T1,AOP ;GET ACCESS OPTIONS
TFNN T1,GNG ;IS THIS A GO/NOGO'ED FILE?
JRST IODX57 ;NO, ALL SET
PUSHJ P,XDACL1## ;YES, SEND AN ACCOMP(CLOSE) FOR THIS ONE
POPJ P, ;NET DIED?
IODX57: PUSHJ P,@-T2(P) ;CALL USER-SUPPLIED ROUTINE
POPJ P, ;HE SAID TO ABORT
JRST IODX60 ;CAP OFF THIS FILE
;ABORT THE CURRENT FILE, SKIP TO THE NEXT ONE
IODX59: PUSHJ P,XDASK1## ;SEND A ACCOMP(SKIP)
POPJ P, ;DIED?
;Continued on next page
;Continued from previous page
;DONE WITH CURRENT FILE, PROCEDE TO NEXT ONE
IODX60: MOVD1 T1,AFC ;ACCESS FUNCTION CODE
CAIE T1,$DVARN ;RENAME?
JRST IODX29 ;NO, PROCEDE TO NEXT FILE
;NOW LOOP RECEIVING NAME MESSAGES AND ATTRIBUTES
IODX61: PUSHJ P,RDMSG1## ;START UP A NEW DAP INPUT MESSAGE
POPJ P, ;NET MUST HAVE DIED
IODX62: JSP T4,.CDISP## ;DISPATCH ON MESSAGE TYPE
IODX63,,$DHSTS ;STATUS, PROBABLY SOME SORT OF ERROR
IODX65,,$DHNAM ;RESULTANT NAME MESSAGE (SUCCESSFUL FILE)
IODX67,,$DHATR ;MAIN ATTRIBUTES
IODX67,,$DHALC ;ALLOCATION ATTRIBUTES
IODX67,,$DHTIM ;DATE/TIME ATTRIBUTES
IODX67,,$DHPRT ;PROTECTION ATTRIBUTES
IODX69,,$DHACK ;ACK, THIS FILE COMPLETE
IODX70,,$DHACM ;ACCOMP, ALL DONE
0 ;ALL OTHERS ILLEGAL
JRST .RDEOS## ;DAP MESSAGE OUT OF SEQUENCE
;RECEIVED STATUS
IODX63: PUSHJ P,RDSTS1## ;READ IN THE STATUS
POPJ P, ;DUH?
CAIE M0,$EGOIP ;"OPERATION IN PROGRESS"?
CAIN M0,$EGAOK ;"A-OK"?
JRST IODX61 ;YES, JUST IGNORE
;***
PUSHJ P,ERMSX1## ;COMPLAIN ABOUT THE ERROR
JFCL ;IGNORE
MOVD1 T1,STC ;GET DAP STATUS CODE
CAIE T1,40000+$DSFNF ;"FILE NOT FOUND"?
CAIN T1,50000+$DSFNF ;"FILE NOT FOUND"?
JRST IODX77 ;YES, AWFUL CASE
PUSHJ P,XDCSK0## ;SEND A CONTROL(SKIP)
POPJ P, ;NET DIED
PUSHJ P,XDFLS0## ;FLUSH OUT THE CONTROL MESSAGE
POPJ P, ;NET DIED
JRST IODX29 ;CONTINUE WITH ANY FURTHER FILES
;Continued on next page
;Continued from previous page
;RECEIVED NAME MESSAGE
IODX65: PUSHJ P,RDDAP1## ;READ IN REST OF NAME MESSAGE
POPJ P, ;NETWORK DIED
PUSHJ P,DPRNM1 ;PROCESS THE RECEIVED NAME
POPJ P, ;NETWORK DIED
JRST IODX61 ;BACK FOR MORE (LOOP TILL ACK)
;RECEIVED ATTRIBUTES
IODX67: PUSHJ P,RDDAP1## ;READ IN THE REST OF THE ATTRIBUTES
POPJ P, ;NETWORK MUST HAVE DIED
JRST IODX61 ;BACK FOR MORE (LOOP TILL ACK)
;RECEIVED ACK
IODX69: PUSHJ P,RDDAP1## ;CAP OFF THE ACK
POPJ P, ;OOPS
JRST IODX29 ;PROCEDE TO NEXT FILE
;ACCESS COMPLETE RECEIVED
IODX70: MOVD T4,AFC ;GET THE ACCESS FUNCTION CODE AGAIN
CAIN T4,$DVADR ;DIRECTORY LIST?
SKIPN .IOFNM(IO) ;YES, STILL HAVE A UNPROCESSED FILE?
CAIA ;NO FUNNY STUFF HERE
JRST IODX50 ;(SIGH) GO FINISH OFF TRAILING FILE
PUSHJ P,RDDAP1## ;READ IN THE REST OF THE MESSAGE
POPJ P, ;DUH?
MOVD T1,A2F ;GET ACCOMP TYPE
CAIE T1,$DVARS ;ACCOMP(RESPONSE)?
STOPCD <ACCOMP(junk) in IODX70>
PUSHJ P,IOABO1 ;NOW STOMP ON THE CDB
JFCL ;HO HUM
JRST .POPJ1## ;FUNCTION COMPLETED
;HERE FOR "FILE NOT FOUND" - THE CONTROL(SKIP) DOESN'T WORK WORTH DIGESTED
;BEANS HERE - VAX AND RSX WILL LOOP SENDING FILE-NOT-FOUND STATUS MESSAGES
;FOREVER; THE -20 SIMPLY IGNORES THE LINK AND HANGS FOREVER.
;
;ACCORDINGLY, STOMP ON THE LINK (WE CAN'T EVEN SEND AN ACCOMP OR ABORT OR
;ANYTHING TO GET OUT OF THIS CASE WITHOUT BREAKING THE LINK!)
IODX77: PUSHJ P,NTZAP1## ;STOMP ON THE LINK
JFCL ;DUH?
PJRST .POPJ1## ;"SUCCESSFUL" RETURN
; I AGREE THAT "SUCCESSFUL" IS A DEBATABLE
; RETURN, BUT AN ERROR MESSAGE HAS BEEN
; ISSUED, SO . . .
;ERROR - REMOTE DOES NOT SUPPORT FILE CONSTRAINT SWITCHES
IODXE0: MOVEI M0,$EFRNC ;NO REMOTE FILE CONSTRAINT SWITCHES
POPJ P,
;ERROR - REMOTE DOES NOT SUPPORT WILDCARDS
IODXE1: MOVEI M0,$EFRNW ;NO REMOTE WILDCARDS
POPJ P,
;ERROR - REMOTE DOES NOT SUPPORT GO/NOGO
IODXE2: MOVEI M0,$EFRNG ;NO REMOTE GO/NOGO SUPPORT
POPJ P,
;TABLE(S) OF REMOTE SUPPORT
IODXTC: TFNN T3,REN ;RENAME
CAIA ;DELETE
TFNN T3,CMF ;EXECUTE
CAIA ;DIRECTORY
IODXTE: MOVEI M0,$EFRNR ;NO REMOTE RENAME SUPPORT
MOVEI M0,-1 ;NOTHING
MOVEI M0,$EFRNX ;NO REMOTE EXECUTE SUPPORT
MOVEI M0,-1 ;NOTHING
IODXTF: MOVEI T1,$DVARN ;RENAME
MOVEI T1,$DVADL ;DELETE
MOVEI T1,$DVAEC ;EXECUTE
MOVEI T1,$DVADR ;DIRECTORY
IODXTW: TFNN T3,WLD ;RENAME - DOES REMOTE SUPPORT WILDCARDS?
TFNN T3,WLD ;DELETE - DOES REMOTE SUPPORT WILDCARDS?
TFNN T3,WLD ;EXECUTE - DOES REMOTE SUPPORT WILDCARDS?
CAIA ;DIRECTORY - DON'T CARE
SUBTTL IOABO - Abort the OPEN file
;IOABO -- ABORT THE CURRENT FILE - IF ANY
;Call is:
;
; MOVX T1,<CDB>
; PUSHJ P,.IOABO
; ERROR RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the I/O CDB.
;
;The error return is not exercised.
;
;On normal return any file I/O associated with the I/O stream has been
;aborted and the CDB is restored to inactive state.
;
;Uses T1, T2, T3, T4
ENTRY .IOABO
INTERN IOABO0, IOABO1
.IOABO: PUSHJ P,.SACIO## ;SETUP IO
IOABO0: PUSHJ P,.SAVE4## ;NEED A FLAG AC
IOABO1: MOVE P1,.IOCCF(IO) ;CHANNEL CONTROL FLAGS
TXNN P1,IO.OPN ;IS THERE A FILE OPEN?
PJRST IOCLO7 ;NO, JUST MARK CHANNEL CLOSED THEN
TXNE P1,IO.NET ;YES - NETWORK CHANNEL?
JRST IONA00 ;YES, DO IT DIFFERENTLY
;WIPE OUT ANY LOCAL I/O IN PROGRESS
HRLZ T3,.IOCHN(IO) ;I/O CHANNEL
HRRI T3,.FOCLS ;"CLOSE" FUNCTION
MOVX T4,CL.RST ;"RESET" (I.E., ABORT) ANY OUTPUT FILE
; MAGTAPE PROCESSING COULD BE SMARTER HERE
; BY BACKSPACING TO START OF FILE . . .
MOVE T1,[2,,T3] ;FILOP. ARG POINTER TO
FILOP. T1, ;ZAPETH THE FILE
JFCL ;DUH?
PJRST IOCLO7 ;AND MARK IT CLOSED
;ABORT NETWORK FILE IN PROGRESS
;
;Some attempt is made to preserve the link with the remote FAL process,
;but if exactly the "right" things don't happen then the network channel
;is simply aborted, and will have to be re-established for the next file.
;This can cause real problems if some sort of wildcarding is being per-
;formed by the remote FAL!
IONA00: PUSHJ P,RDEAT0## ;EAT ANYTHING CURRENTLY IN PROGRESS
JFCL ;DUH?
TXNN P1,IO.OPN ;A FILE OPEN HERE?
PJRST IOCLO7 ;NO, THEN ALL DONE
;ABORT THE OPENED FILE
PUSHJ P,XDABM0## ;STOMP ON ANY PENDING MESSAGE
JFCL ;EXPECT THE ERROR RETURN
MOVD1 T1,FST ;*** GET THE REMOTE FILE SYSTEM TYPE
CAIN T1,$DVFF1 ;*** GOOD OLE FCS-11?
JRST [TXNE P1,IO.OUT ;*** DOING INPUT OR OUTPUT?
JRST .+1 ;*** OUTPUT, "KILL" THE FILE
PUSHJ P,XDACL0## ;*** INPUT, DO SHORT-FORM CLOSE
PJRST IONA80 ;*** OTHERWISE FCS-11 WILL KILL
;*** (READ: "DELETE") THE INPUT
;*** FILE!!
JRST IONA27] ;*** BLUNDER ONWARDS
MOVX T1,IO.SID ;SET FLAG SO THAT THE CONTINUE(ABORT)
IORM T1,.IOCCF(IO) ;IS SENT AS INTERRUPT DATA
PUSHJ P,XDCAB0## ;CONTINUE(ABORT) THE FILE
JRST IONA80 ;FORGET IT, ABORT THE LINK
PUSHJ P,XDAKL0## ;KILL/RESET (SHORT FORM) THE FILE
JRST IONA80 ;FORGET IT, ABORT THE LINK
IONA27: PUSHJ P,XDFLS0## ;FLUSH THE OUTPUT BUFFERS
JRST IONA80 ;FORGET IT, ABORT THE LINK
;WAIT FOR THE ACK FROM THE REMOTE
IONA30: PUSHJ P,RDMSG0## ;READ IN A DAP MESSAGE CODE
JRST IONA80 ;ABORT THE LINK
JSP T4,.CDISP## ;DISPATCH ON RECEIVED MESSAGE TYPE
IONA40,,$DHDAT ;DATA MESSAGE, JUST EAT IT
IONA50,,$DHSTS ;STATUS, MAYBE ERROR
IONA60,,$DHNAM ;NAME MESSAGE, ASSUME MORE INPUT FILES
IONA70,,$DHACM ;ACCESS COMPLETE, MUST BE ACCOMP(RESPONSE)
0 ;THAT'S IT
JRST IONA80 ;JUST ABORT THE LINK
;DATA MESSAGE, JUST EAT IT
IONA40: PUSHJ P,RDEAT0## ;EAT THE REST OF THE MESSAGE
JRST IONA80 ;ABORT THE LINK
JRST IONA30 ;GO GET THAT BLASTED ACK
;STATUS MESSAGE, POSSIBLE ERROR STATUS
IONA50: PUSHJ P,RDSTS0## ;RECEIVE THE DAP STATUS MESSAGE CODES
JRST IONA80 ;ABORT THE LINK
;*** BUT SEE ALSO IONC50!!!
;*** DO I HAVE TO CHECK TOPS20 HERE ALSO?
POPJ P, ;PROPAGATE A REALLY INCONVENIENT ERROR!
;GOT A NAME MESSAGE, ALMOST THE SAME THING AS AN ACK, ONLY MORE INPUT FILES
;ARE COMMING
IONA60: PJRST IONC60 ;SAME AS NORMAL CLOSE FROM HERE ON
;GOT THE ACKNOWLEDGEMENT (I.E., ACCOMP(RESPONSE))
IONA70: PJRST IONC70 ;SAME AS NORMAL CLOSE FROM HERE ON
;SOMETHING BAD, JUST ABORT THE ENTIRE LINK
IONA80: PUSHJ P,NTZAP0## ;STOMPETH UPON THE NETWORK CHANNEL
JFCL ;OH COME NOW!
PJRST IOCLO7 ;MARK CDB CLOSED
SUBTTL IOCLO - CLOSE the OPEN file
;IOCLO -- CLOSE THE CURRENT OPEN FILE
;Call is:
;
; MOVX T1,<CDB>
; PUSHJ P,.IOCLO
; ERROR RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the I/O CDB controlling the "open" file.
;
;On error return the monitor was unable to successfully close the file
;(detailed reason currently unavailable)
;
;Uses T1, T2, T3, and T4.
ENTRY .IOCLO
INTERN IOCLO0, IOCLO1
.IOCLO: PUSHJ P,.SACIO## ;SETUP IO
IOCLO0: PUSHJ P,.SAVE4## ;PRESERVE THE P'S
IOCLO1: MOVE P1,.IOCCF(IO) ;GET CHANNEL CONTROL FLAGS
TXNN P1,IO.OPN ;DO WE HAVE A FILE OPEN?
JRST [MOVX M0,$EICNO ;CHANNEL NOT "OPEN"
JRST .M0ERR##] ;RETURN ERROR STATUS
;GO DO ANY FINAL I/O CLEANUP THAT MIGHT BE NEEDED
PUSHJ P,@.IOISS(IO) ;CALL INPUT SHUTDOWN ROUTINE
POPJ P, ;PROPAGATE ERROR
PUSHJ P,@.IOOSS(IO) ;CALL OUTPUT SHUTDOWN ROUTINE
POPJ P, ;PROPAGATE ERROR
;I/O EFFECTIVELY COMPLETE, CLOSE OFF THE FILE
PUSHJ P,IOCLP1 ;BUILD CLOSE-OPTIONS IN P2
POPJ P, ;URK!
TXNE P1,IO.NET ;IS THIS A NETWORK FILE?
JRST IONC00 ;YES
;Continued on next page
;Continued from previous page
;LOCAL FILE SYSTEM, TELL MONITOR WE ARE DONE WITH THE FILE
IOCLO3: TXNE P2,IM.CDL ;WANT TO DELETE FILE ON CLOSE?
PJRST IOFDL1 ;YES (TAKES PRECEDENCE OVER PRINT/SUBMIT)
MOVE T2,.IOFSC(IO) ;ADDRESS OF "CURRENT" FILE SPEC BLOCK
MOVE T2,.FXCTL(T2) ;GET CONTROL FLAGS
SETZ T4, ;TOPS-10 CLOSE BITS
TXNN T2,FX.ALC!FX.CTG;USER SPECIFY /ALLOCATE OR /CONTIGUOUS?
TXNE P2,IM.CTG!IM.MFA;OR OTHERWISE MAINTAIN FILE ALLOCATION?
TXO T4,CL.DLL ;YES
TXNE P2,IM.SAD ;SUPPRESS ACCESS DATE UPDATE?
TXO T4,CL.ACS ;YES
HRLZ T3,.IOCHN(IO) ;I/O CHANNEL NUMBER
HRRI T3,.FOCLS ;"CLOSE" FUNCTION
MOVE T1,[2,,T3] ;FILOP. ARG POINTER TO
FILOP. T1, ;CLOSE THE CURRENT FILE
JRST [MOVEM T1,.I1IOS(IO) ;SAVE I/O STATUS
MOVX M0,$EIECF ;ERROR CLOSING CHANNEL
JRST .M0ERR##] ;RETURN ERROR STATUS
;NOW IS THE TIME TO PRINT AND/OR SUBMIT THE FILE IF REQUESTED
;
;SUBMIT TAKES PRECEDENCE OVER PRINT IN THAT IF SUBMIT IS SET THEN [NO]PRINT
;IS INTERPRETED AS /OUTPUT:[NO]LOG. ALTHOUGH THIS IS A KROCK, DAP DOESN'T
;REALLY ADDRESS THIS ISSUE, SO . . .
TXNN P2,IM.CSU!IM.CPR;WANT EITHER PRINT OR SUBMIT?
PJRST IOCLO7 ;NO, TRULY DONE WITH THE FILE THEN
MOVEI T2,.QUBAT ;ASSUME SUBMIT
TXNN P2,IM.CSU ;WANT SUBMIT?
MOVEI T2,.QUPRT ;NO, WANTED PRINT INSTEAD
PUSHJ P,QUEOP0## ;GO DIDDLE THE FILE
POPJ P, ;OOPS
;CONTINUE IN IOCLO7
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;MARK THE FILE "CLOSED" FOR I/O PURPOSES (BUT MAY STILL HAVE THE DEVICE)
IOCLO7: MOVX T1,IO.CFC ;THE FILE-IS-OPEN BIT(S)
ANDCAB T1,.IOCCF(IO) ;MARK FILE "NOT OPEN" IN THE CDB
;BUT THE "CHANNEL" IS STILL IN USE
;*** SETZM .IOBZC(IO) ;START OF TO-BE-CLEARED ON CLOSE
;*** MOVEI T2,.IOBZC+1(IO) ;CONCOCT A
;*** HRLI T2,-1(T2) ; BLT POINTER TO
;*** BLT T2,.IOEZC-1(IO) ; CLEAR THE TO-BE-CLEARED AREA
;*** MOVE T2,.IOIOM(IO) ;GET I/O MODE CONTROL
;*** MOVEI T3,.ICDEF ;DEFAULT FILE DATA MODE
;*** TXNN T2,IM.CMD ;.IOIOC MODE OVERRIDDING?
;*** DPB T3,[POINTR .IOIOC(IO),IC.MOD] ;RESET (TO ALLOW DEFAULT TO WORK)
PJRST IORLS8 ;RESET STATE (ISR) PROCESSORS
;*** MOVE T2,.IOIOM(IO) ;I/O MODE FLAGS
;***
;THE FOLLOWING CHECK FOR IO.WCR IS KROCKED OUT UNTIL I CAN FIGURE OUT
;HOW TO MAKE THE MONITOR BELIEVE MY FILOP.S
;
;*** TXNE T2,IM.WCR ;USER PROMISE TO CALL IORLS WHEN HE'S DONE?
;*** TXNN T1,IO.NET ;YES, IS THIS NETWORK?
;*** CAIA ;NOT A NETWORKED IM.WCR CHANNEL
;*** JRST [MOVD1 T1,FST ;*** REMOTE FILE SYSTEM TYPE
;*** CAIN T1,$DVFF1 ;*** FCS-11?
;*** JRST IORLS1 ;*** YES, MUST BREAK NETWORK CONNECTION
;*** ;*** AFTER EVERY FILE (BUG IN REMOTE)
;*** JRST IORLS8] ;*** NO, OK
;***
;*** TXNE T2,IM.WCR ;WILL USER CALL IORLS LATER?
;*** JRST IORLS1 ;NO, SO CLEAN UP NOW
;*** JRST IORLS8 ;YES, JUST SET STATE PROCESSORS
;HERE TO CLOSE A NETWORK FILE
IONC00: SKIPLE .IODIM(IO) ;AN INPUT MESSAGE PENDING?
STOPCD <DAP input message in progress at call to IONC00>
SKIPLE T1,.IODOM(IO) ;AN OUTPUT MESSAGE PENDING?
STOPCD <DAP output message in progress at call to IONC00>
;*** IS IT WORTHWHILE TO SEND ACCOMP(EOS) TO SYNC FIRST?
IONC20: MOVDII P3,M07,A2F ;ALWAYS SEND AT LEAST THE FUNCTION FIELD
PUSHJ P,IOCLQ1 ;BUILD AFO MASK OF CLOSE OPTIONS
POPJ P, ;CAN'T FAIL
MOVDM T1,AFO ;SET ACCESS COMPLETE FILE OPTIONS
FJUMPE T1,AFO,IONC23 ;ARE THERE ANY ACCESS OPTIONS?
TMO P3,AFO ;YES, FLAG OPTIONS FIELD IN THE [HIDDEN] MENU
IONC23: MOVD T1,AOP ;GET FILE ACCESS OPTIONS
TFNN T1,ACK ;DOES THIS DATA STREAM WANT TO BE CHECKSUMMED?
JRST IONC25 ;NO, SKIP CRC STUFF
MOVE T4,.IOCCF(IO) ;YES, CRC REQUESTED, GET CHANNEL CONTROL FLAGS
TXNE T4,IO.IOA ;HAS FILE EVER BEEN I/O ACTIVE?
TXNE T4,IO.NCK ;YES - BUT DOES CALLER WANT TO SUPPRESS CRC?
JRST IONC25 ;EITHER NO I/O, OR EXPLICIT NO CRC
TMO P3,<AFO,CKS> ;YES, FLAG CHECKSUM FIELD IN THE [HIDDEN] MENU
TXNE T4,IO.INP ;WAS THE FILE OPEN FOR INPUT?
SKIPA T3,.IODIK(IO) ;YES, GET INPUT DATA STREAM CRC
MOVE T3,.IODOK(IO) ;NO, GET OUTPUT DATA STREAM CRC
MOVD1M T3,CKS ;SET DAP CRC FIELD
IONC25: MOVEI T2,$DVACL ;"CLOSE" FUNCTION
MOVD1M T2,A2F ;SET ACCOMP FUNCTION FIELD
MOVDM P3,M07 ;SET THE HIDDEN ACCOMP MENU FIELD
MOVEI T2,$DHACM ;ACCESS COMPLETE MESSAGE CODE
PUSHJ P,XDDAP1## ;SHIP ACCOMP(CLOSE)
POPJ P, ;NETWORK DIED? I WONDER IF THE FILE IS CLOSED?
IONC29: PUSHJ P,XDFLS1## ;FORCE OUT THE ACCOMP(CLOSE) MESSAGE
POPJ P, ;SIGH
;Continued on next page
;Continued from previous page
;WAIT FOR REMOTE'S RESPONSE TO OUR ACCESS COMPLETE COMMAND
IONC30: PUSHJ P,RDMSG1## ;READ IN DAP MESSAGE CODE
POPJ P, ;NETWORK DIED
JSP T4,.CDISP## ;DISPATCH ON MESSAGE TYPE
IONC40,,$DHDAT ;DATA, JUST ABSORB IT
IONC50,,$DHSTS ;STATUS, MAYBE AN ERROR
IONC60,,$DHNAM ;NAME MESSAGE, MORE INPUT FILE(S)
IONC70,,$DHACM ;ACCESS COMPLETE, CHECK FOR ACCOMP(RESPONSE)
0 ;NO MORE
JRST .RDEOS## ;DAP MESSAGE OUT OF SEQUENCE
;DATA MESSAGE, JUST EAT IT
IONC40: PUSHJ P,RDEAT1## ;EAT THE DAP MESSAGE
POPJ P, ;SIGH
JRST IONC30 ;WAIT FOR THE ACCOMP(RESPONSE)
;STATUS MESSAGE, MAYBE ERROR
IONC50: PUSHJ P,RDSTS1## ;READ IN THE STATUS MESSAGE
POPJ P, ;OOPS
CAIE M0,$EGOIP ;"OPERATION IN PROGRESS"?
CAIN M0,$EGAOK ;"A-OK"?
JRST IONC30 ;YES (DUH?) EAT IT
MOVD T1,FST ;*** FILE SYSTEM TYPE
CAIN T1,$DVFT2 ;*** TOPS-20?
JRST [LDB T1,PDPEMA## ;*** YES, GET MACCODE
CAIE T1,4 ;*** FILE-NOT-OPEN CLASS?
JRST .+1 ;*** NO, NORMAL
MOVX T1,IO.YAF!IO.YAE;*** YES, THE -20 HAS CLOSED THE
IORM T1,.IOCCF(IO) ;*** FILE SUCCESSFULLY, AND ADVANCED
;*** TO THE NEXT FILE, WHICH IS A
;*** (E.G.) PROTECTION FAILURE
MOVEI T1,[ASCIZ\ <<No filename supplied by remote file server>>\]
MOVEM T1,.IOFNM(IO) ;*** LIFE . . .
SETZM .IOFEX(IO) ;*** NO EXTENSION EITHER
SETZM .IOFGN(IO) ;*** NO GENERATION EITHER
;*** BUT MUST PRESERVE DEVICE, DIRECTORY
JRST IONC73] ;*** FOR NOW, NORMAL FILE CLOSURE
POPJ P, ;PROPAGATE ERROR
;NAME MESSAGE, MORE INPUT FILE(S) COMING UP
IONC60: PUSHJ P,RDMSR0## ;RE-EAT THIS NAME MESSAGE FOR OPIRXX
STOPCD
MOVX T1,IO.YAF ;THE YET-ANOTHER-FILE FLAG
IORM T1,.IOCCF(IO) ;TELL OPIR ANOTHER FILE IS COMING
JRST IONC73 ;OTHERWISE TREAT AS ACCOMP(RESPONSE)
;ACCESS COMPLETE - MAKE SURE IT'S THE FLAVOR WE WANT
IONC70: PUSHJ P,RDDAP1## ;READ IN REST OF ACCOMP MESSAGE
POPJ P, ;OOPS
MOVD1 T3,A2F ;ACCESS COMPLETE FUNCTION CODE
CAIE T3,$DVARS ;ACCOMP(RESPONSE)?
JRST IOCNE1 ;NO, MESSAGE OUT OF SEQUENCE
IONC73: MOVX T3,IO.CNC ;NETWORK-LEVEL CLOSE
ANDCAM T3,.IOCCF(IO) ;CLEAR FLAGS IN THE CONTROL WORD
JRST IOCLO7 ;MARK FILE SUCCESSFULLY CLOSED
IOCNE1: STOPCD <ACCOMP(junk) received in reply to ACCOMP(CLOSE)>
;IOCLP - SETUP CLOSE-OPTIONS LIKE /DELETE, ETC.
IOCLP1: MOVE P1,.IOCCF(IO) ;RETRIEVE CHANNEL CONTROL
MOVE P2,.IOIOM(IO) ;GET MODE CONTROL TOO
MOVE T1,.IOFSC(IO) ;ADDRESS OF CURRENT FILE SPEC BLOCK
DMOVE T3,.FXCTL(T1) ;FILE CONTROL SWITCHES
TXNN T4,FX.DEL ;/[NO]DELETE ON CLOSE?
JRST IOCLP3 ;NO
TXNN T3,FX.DEL ;/DELETE OR /NODELETE?
TXZA P2,IM.CDL ;/NODELETE
TXO P2,IM.CDL ;/DELETE
IOCLP3: TXNN T4,FX.PRI ;/[NO]PRINT ON CLOSE?
JRST IOCLP4 ;NO
TXNN T3,FX.PRI ;/PRINT OR /NOPRINT?
TXZA P2,IM.CPR ;/NOPRINT
TXO P2,IM.CPR ;/PRINT
IOCLP4: TXNN T4,FX.SUB ;/[NO]SUBMIT ON CLOSE?
JRST IOCLP5 ;NO
TXNN T3,FX.SUB ;/SUBMIT OR /NOSUBMIT?
TXZA P2,IM.CSU ;/NOSUBMIT
TXO P2,IM.CSU ;/SUBMIT
IOCLP5: JRST .POPJ1## ;ALL DONE HERE
;IOCLQ1 - GENERATE DAP AFO MASK OF CLOSE OPTIONS
IOCLQ1: SETZB T1,T2 ;ASSUME NO "FILE OPTIONS"
;*** AT THIS POINT, I SHOULD CHECK FOR THE REMOTE'S WILLINGNESS TO
;*** ACCEPT THE VARIOUS "OPTIONS" - BUT WHAT DO I DO IF THE REMOTE
;*** DOESN'T? CLOSE THE FILE ANYWAY? ERROR RETURN WITH THE FILE STILL
;*** OPEN?
TXNE P2,IM.CDL ;DELETE ON CLOSE?
TFO T1,DLT ;YES
TXNE P2,IM.CPR ;PRINT ON CLOSE?
TFO T1,SPC ;YES
TXNE P2,IM.CSU ;SUBMIT ON CLOSE?
TFO T1,SCF ;YES
JRST .POPJ1## ;RETURN WITH AFO MASK IN T1/T2
SUBTTL IORLS - RELEASE an OPEN file and I/O channel
;IORLS -- RELEASE AN I/O CHANNEL
;Call is:
;
; MOVX T1,<CDB>
; PUSHJ P,.IORLS
; ERROR RETURN
; NORMAL RETURN
;
;Where <CDB> is the address of the I/O CDB controlling an I/O stream.
;
;on error return the file couldn't be CLOSEd (if a file was OPEN) or
;an error occured trying to RELEASE the I/O device/etc.
;
;On normal return the CDB has been "shut down" - any device still
;allocated has been returned to the monitor, buffers are freed up, etc.
;
;Uses T1, T2, T3, T4.
ENTRY .IORLS
INTERN IORLS0, IORLS1
.IORLS: PUSHJ P,.SACIO## ;SETUP IO
IORLS0: PUSHJ P,.SAVE4## ;WANT A PRESERVED AC
IORLS1: MOVE P1,.IOCCF(IO) ;GET A COPY OF THE CHANNEL CONTROL FLAGS
TXNN P1,IO.OPN ;IS A FILE CURRENTLY OPEN?
JRST IORLS2 ;NO
PUSHJ P,IOABO1 ;YES, ZAP THE FILE
POPJ P, ;OOPS
MOVE P1,.IOCCF(IO) ;NEW COPY OF CHANNEL CONTROL FLAGS
IORLS2: TXNE P1,IO.NET ;NETWORK FILE?
JRST IONR00 ;YES, HANDLE DIFFERENTLY
TXNN P1,IO.DEV ;DO WE HAVE A DEVICE "HANGING AROUND"
SKIPE .IOCHN(IO) ;OR A CHANNEL EVEN (SHOULDN'T HAPPEN)?
CAIA ;YES, NEED TO STOMP ON IT
JRST IORLS4 ;NO, GO CHECK FOR BUFFERS
HRLZ T3,.IOCHN(IO) ;I/O CHANNEL
HRRI T3,.FOREL ;"RELEASE" FUNCTION
MOVE T1,[1,,T3] ;FILOP. ARG POINTER TO
FILOP. T1, ;RELEASE THE DEVICE/CHANNEL
SKIPA T1,.IOCHN(IO) ;ERROR RELEASING THE CHANNEL
JRST IORLS4 ;CHANNEL RELEASED
RESDV. T1, ;STOMP ON THE CHANNEL GOOD 'N HARD
JFCL ;WELL, THE CHANNEL IS USELESS IN ANY CASE
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;HERE TO MARK THE CHANNEL FREE AND DE-ALLOCATE ANY BUFFERS
IORLS4: SETZM .IOCHN(IO) ;THE CHANNEL IS NO LONGER IN USE HERE
MOVX P1,IO.CFR ;THE DEVICE-IS-ALLOCATED BIT(S)
ANDCAB P1,.IOCCF(IO) ;CLEAR IT IN THE CDB
SETZM .I1FIO(IO) ;CLEAR CHANNEL-IN-USE DEVICE FLAGS
SETZM .I1FIO+1(IO) ; AND ASSOCIATED DEVICE NAME
TXNN P1,IO.OBA ;ANY OUTPUT BUFFERS LYING AROUND?
JRST IORLS5 ;NO
DMOVE T2,.IOOAC(IO) ;YES, GET ALLOCATION AND ADDRESS WORDS
CAILE T2,0 ;SOMETHING THERE?
CAIG T3,0 ;SOMETHING THERE?
STOPCD <File output buffers trashed in IORLS>
XMOVEI T4,.IOOBH(IO) ;ADDRESS OF OUTPUT RING HEADER
PUSHJ P,IOBFZ0 ;FREE UP THE BUFFER RING
STOPCD <File output buffer deallocation failed in IORLS>
MOVX P1,IO.OBA ;THE OUTPUT-BUFFERS-ALLOCATED BIT
ANDCAB P1,.IOCCF(IO) ;CLEAR IT IN THE CDB
IORLS5: TXNN P1,IO.IBA ;ANY INPUT BUFFERS LYING AROUND?
JRST IORLS7 ;NO
DMOVE T2,.IOIAC(IO) ;YES, GET ALLOCATION AND ADDRESS WORDS
CAILE T2,0 ;SOMETHING THERE?
CAIG T3,0 ;SOMETHING THERE?
STOPCD <File input buffers trashed in IORLS>
XMOVEI T4,.IOIBH(IO) ;ADDRESS OF INPUT RING HEADER
PUSHJ P,IOBFZ1 ;FREE UP THE BUFFER RING
STOPCD <File input buffer deallocation failed in IORLS>
MOVX P1,IO.IBA ;THE INPUT-BUFFERS-ALLOCATED BIT
ANDCAB P1,.IOCCF(IO) ;CLEAR IN THE CDB
IORLS7: MOVX P1,IO.CFR ;CLEAR-ON-RELEASE BITS
ANDCAB P1,.IOCCF(IO) ;CAN'T DO ANY I/O NOW
SETZM .IOBZR(IO) ;CLEAR START OF TO-BE-CLEARED ON RELEASE
MOVEI T2,.IOBZR+1(IO) ;CONCOCT A
HRLI T2,-1(T2) ; BLT POINTER TO
BLT T2,.IOEZR-1(IO) ; CLEAR THE TO-BE-CLEARED AREA
IORLS8: XMOVEI T2,.IOIIE## ;INPUT-NOT-OPEN ISR
MOVEM T2,.IOISR(IO) ;SET IN CDB
XMOVEI T2,.POPJ1## ;INPUT SHUTDOWN ROUTINE
MOVEM T2,.IOISS(IO) ;SET IN CDB
XMOVEI T2,.IOOIE## ;OUTPUT-NOT-OPEN OSR
MOVEM T2,.IOOST(IO) ;SET IN CDB
XMOVEI T2,.POPJ1## ;OUTPUT SHUTDOWN ROUTINE
MOVEM T2,.IOOSS(IO) ;SET IN CDB
JRST .POPJ1## ;ALL DONE
;HERE FOR NETWORK FILES
;
;FOR THE TIME BEING (AND MAYBE EVEN FOREVER) WE JUST ABORT THE LINK,
;AS THERE IS NOTHING REALLY TO BE GAINED FROM A DISCONNECT INITIATE,
;WAIT FOR POSSIBLE DATA, READ DISCONNECT CONFIRM SEQUENCE. ABORTING
;IS QUICKER, AND STILL SAFE (SINCE THE DAP PIPELINE IS GUARANTEED TO
;BE SYNCHRONIZED (AND IN PARTICULAR, EMPTY) BY THE TIME CONTROL GETS
;HERE. (ACTUALLY, IF RUNNING PASSIVE, IT IS POSSIBLE THAT A DAP RE-
;QUEST IS JUST COMING DOWN THE LINE, BUT IF WE GET HERE FOR A PASSIVE
;DAP PROCESS SOMETHING IS PRETTY SCREWY ANYWAY.)
IONR00:;SETZB T2,T3 ;REASON,,OPTIONAL USER DATA
; PUSHJ P,NTNSD1## ;SEND DISCONNECT INITIATE
; JRST IONR80 ;HMMM. ABORT THE LINK
; PUSHJ P,NTNRL1## ;RELEASE THE LINK
; JRST IONR80 ;HMMM. ABORT THE LINK
; JRST IORLS7 ;NETWORK SHUTDOWN, FINISH OFF THE CDB
;ABORT THE NETWORK LINK
IONR80: PUSHJ P,NTZAP1## ;KILL THE NETWORK CHANNEL
JFCL ;SIGH
JRST IORLS7 ;AND SHUT DOWN THE CDB
SUBTTL IOBFA - Allocate and initialize I/O buffers
;IOBFA -- ALLOCATE AND INITIALIZE I/O BUFFERS
;CALL IS:
;
; MOVX T1,<CDB>
; MOVX T2,<BUFARG>
; MOVX T4,<RHDR>
; PUSHJ P,.IOBFA
; ERROR RETURN
; NORMAL RETURN
;
;Where <BUFARG> is count of desired buffers in the ring structure in the left
;half and size of an individual buffer (data size only) in the right half);
;and <RHDR> is the address of the buffer ring header control block. <CDB>
;if non-zero is the I/O CDB which will own the buffers, and from which
;the buffer space may be allocated - CDB "extra" space permitting. If the
;CDB can't hold the buffers (or <CDB> = 0) the buffer space will be
;allocated from program "Managed Memory" (free space).
;
;On error return insufficient memory was available in which to construct
;even one buffer.
;
;On normal return memory needed to hold the ring structure has been
;allocated, the buffer ring structure has been linked together and
;initialized (ready for first I/O) and T2 will contain <BUFARG> as
;actually used with T3 the base address of the first buffer.
;
;Uses T1, T2, T3, and T4.
ENTRY .IOBFA
INTERN IOBFA0, IOBFA1
.IOBFA: PUSHJ P,.SACIO## ;SET UP IO
IOBFA0:
IOBFA1: PUSHJ P,TSAV14## ;SAVE THE ARGUMENTS
HLRZ T1,T2 ;COUNT OF BUFFERS
ANDI T2,-1 ;SIZE OF INDIVIDUAL BUFFER
ADDI T2,3 ;PLUS BUFFER HEADER OVERHEAD WORDS
IMULI T1,(T2) ;T1:=TOTAL ADDRESS SPACE NEEDED
JUMPE IO,IOBFA5 ;IF NO CDB THEN COMES FROM MANAGED MEMORY
SKIPN T3,.IOXFF(IO) ;WE HAVE A CDB, ANY "EXTRA" SPACE THERE?
JRST IOBFA5 ;NO, USE NORMAL MANAGED MEMORY
ADD T3,T1 ;T3:=PROPOSED NEW .IOXFF
CAMLE T3,.IOXSZ(IO) ;WILL THIS ALLOCATION FIT IN THE EXTRA SPACE?
JRST IOBFA5 ;NO, ALLOCATE FROM MANAGED MEMORY
EXCH T3,.IOXFF(IO) ;YES, GET START OFFSET (AND SET NEW FIRST FREE)
ADD T3,IO ;RELOCATE INTO PHYSICAL CDB
IOBFA3: MOVEM T3,-T3(P) ;RETURN BASE ADDRESS TO CALLER
MOVE T2,-T2(P) ;RE-SETUP BUFARG
MOVE T4,-T4(P) ;AND BUFFER RING HEADER ADDRESS
PJRST IOBFI2 ;AND INITIALIZE THE BUFFER RING
;HERE TO ALLOCATE BUFFER SPACE FROM PROGRAM MANAGED MEMORY
IOBFA5: PUSHJ P,.MMGWD## ;ALLOCATE SOME WORDS OF "MANAGED MEMORY"
JRST IOBFA7 ;NONE AVAILABLE
MOVE T3,T2 ;PUT START ADDRESS IN T3
JRST IOBFA3 ;AND FINISH UP
IOBFA7: STOPCD <File buffer allocation failed in IOBFA>
SUBTTL IOBFI - Initialize I/O buffers
;IOBFI -- INITIALIZE I/O BUFFERS
;CALL IS:
;
; MOVX T2,<BUFARG>
; MOVX T3,<ADDR>
; MOVX T4,<RHDR>
; PUSHJ P,.IOBFI
; ERROR RETURN
; NORMAL RETURN
;
;Where <BUFARG> is count of desired buffers in the ring structure in the left
;half and size of an individual buffer (data size only) in the right half);
;<ADDR> is the base address of the first buffer (all buffers are assumed
;in to be in a physically-contiguous block); and <RHDR> is the address of
;the buffer ring header control block.
;
;The error return is not exercised.
;
;On normal return the buffer ring structure has been linked together and
;initialized (ready for first I/O) and T2/T3 will contain <BUFARG> and
;<ADDR> as actually used.
;
;Uses T1, T2, T3, and T4.
ENTRY .IOBFI
INTERN IOBFI0, IOBFI1
.IOBFI: PUSHJ P,.SACIO## ;SET UP IO
IOBFI0:
IOBFI1: PUSHJ P,TSAV14## ;SAVE OUR ARGUMENTS
IOBFI2: CAIL T3,.JBDA ;REASONABLE ADDRESS FOR BUFFER RING?
CAIGE T4,.JBDA ;REASONABLE ADDRESS FOR RING HEADER?
STOPCD <Invalid buffer address in IOBFI2>
MOVSI T1,007700 ;JUST THE BYTE-SIZE FIELD
ANDM T1,.BFPTR(T4) ;INITIALIZE BYTE POINTER
SETZM .BFCTR(T4) ;AND BYTE COUNTER IN RING HEADER
HLRZ T1,T2 ;COUNT OF BUFFERS IN RING
ANDI T2,-1 ;SIZE OF INDIVIDUAL BUFFER
ADDI T2,3 ;PLUS BUFFER HEADER OVERHEAD WORDS
ADDI T3,.BFHDR ;RELOCATE TO LINK WORD OF FIRST BUFFER
MOVE M0,T3 ;HANG ON TO COPY OF START LINK WORD
HRRZ T4,T3 ;START OF START OF NEXT BUFFER IN RING
TLOA T4,-2(T2) ;SET DATA SIZE + 1 IN LH OF .BFHDR WORD
IOBFI6: ADDI T3,(T2) ;ADDRESS OF NEW CURRENT BUFFER
ADDI T4,(T2) ;ADDRESS OF NEXT POSSIBLE BUFFER IN RING
MOVEM T4,(T3) ;LINK CURRENT BUFFER TO NEXT BUFFER
SOJG T1,IOBFI6 ;LOOP TILL LAST BUFFER IN RING
HRRM M0,(T3) ;LINK LAST BUFFER TO FIRST BUFFER
TXO M0,BF.VBR ;THE VIRGIN BUFFER RING BIT
MOVEM M0,@-T4(P) ;LINK CONTROL BLOCK TO RING STRUCTURE
JRST .POPJ1## ;I/O BUFFERS ALL SET FOR I/O
SUBTTL IOBFZ - Deallocate I/O buffers
;IOBFZ -- FREE UP I/O BUFFERS
;CALL IS:
;
; MOVX T1,<CDB>
; MOVX T2,<BUFARG>
; MOVX T3,<ADDR>
; MOVX T4,<RHDR>
; PUSHJ P,.IOBFI
; ERROR RETURN
; NORMAL RETURN
;
;Where <BUFARG> is count of desired buffers in the ring structure in the left
;half and size of an individual buffer (data size only) in the right half);
;<ADDR> is the base address of the first buffer (all buffers are assumed
;in to be in a physically-contiguous block); and <RHDR> is the address of
;the buffer ring header control block. <CDB>, if supplied, is the address
;of the I/O CDB which owns the buffers (and in whose "extra" space the
;buffers may reside).
;
;The error return is not exercised.
;
;On normal return the buffer ring header is zeroed and the buffer space
;has been freed (either returned to "managed memory" or to the I/O CDB
;"extra" space as appropriate).
;
;Uses T1, T2, T3, and T4.
ENTRY .IOBFZ
INTERN IOBFZ0, IOBFZ1
.IOBFZ: PUSHJ P,.SACIO## ;SET UP IO
IOBFZ0:
IOBFZ1: PUSHJ P,TSAV14## ;SAVE THE T'S
;DELINK THE RING HEADER FROM THE BUFFER RING ITSELF
SETZM .BFADR(T4) ;DELINK THE RING FROM THE HEADER
SETZM .BFCTR(T4) ;ZAP THE BYTE COUNTER AND
SETZM .BFPTR(T4) ;BYTE POINTER ON G.P.'S
;Continued on next page
;Continued from previous page
;NOW FREE UP THE BUFFERS
HLRZ T1,T2 ;COUNT OF BUFFERS
ANDI T2,-1 ;SIZE OF AN INDIVIDUAL BUFFER
ADDI T2,3 ;PLUS BUFFER OVERHEAD WORDS
IMULI T1,(T2) ;TOTAL BUFFER SPACE USED
JUMPE IO,IOBFZ4 ;IF NO CDB THEN CAME FROM MANAGED MEMORY
MOVE T4,IO ;START OF CDB
ADD T4,.IOXSZ(IO) ;T4:= ULTIMATE END OF CDB
CAML T3,IO ;IS BUFFER SPACE WITHIN THE CDB?
CAML T3,T4 ; . . .
JRST IOBFZ4 ;NO, THEN MUST BE FROM MANAGED MEMORY
;BUFFER SPACE FROM CDB "EXTRA" SPACE, TRY TO RECLAIM IT
MOVE T4,IO ;START OF CDB
ADDI T4,.IOMAX ;START OF "EXTRA" SPACE
CAMGE T3,T4 ;BUFFER OVERLAP FIXED DATA?
STOPCD <CDB "extra" space file buffers overlap CDB data in IOBFZ>
MOVE T4,IO ;START OF CDB
ADD T4,.IOXFF(IO) ;FIRST FREE IN "EXTRA" SPACE
ADD T1,T3 ;T1:=END (+1) OF BUFFER SPACE
CAME T1,T4 ;THIS BUFFER LAST THING ALLOCATED?
JRST .POPJ1## ;NO, CAN'T FREE IT
SUB T1,T3 ;YES, GET BACK ACTUAL SIZE OF BUFFER SPACE
MOVNS T1 ; (NO SUB FROM MEMORY)
ADDM T1,.IOXFF(IO) ;RECLAIM THE BUFFER SPACE
JRST .POPJ1## ;RETURN
;HERE WHEN BUFFER CAME FROM MAMAGED MEMORY
IOBFZ4: MOVE T2,T3 ;POSITION START ADDRESS
PUSHJ P,.MMFWD## ;FREE UP MANAGED MEMORY WORDS
STOPCD <File buffer deallocation failed in IOBFZ>
JRST .POPJ1## ;ALL DONE
SUBTTL IOQAT - QUERY file-level access processor
;IOQAT -- PROCESS /QUERY "FILE SPEC" SWITCH
;IOQAA -- PROCESS /QUERY, LOOK ONLY FOR /QUERY:ASK, IGNORE /QUERY:TELL
;IOQTT -- PROCESS /QUERY, LOOK ONLY FOR /QUERY:TELL, IGNORE /QUERY:ASK
;IOQET -- ERROR-MESSAGE-LEVEL FILE "TELL"ER
;Call is:
;
; MOVX T1,<OUTPUT>
; MOVX T2,<INPUT>
; PUSHJ P,.IOQAT/.IOQAA/.IOQTT/.IOQET
; REJECTED
; NORMAL RETURN
;
;Where <INPUT> is the address of the input I/O CDB (required); and
;<OUTPUT> is the address of the output I/O CDB. <OUTPUT> may be 0
;if there is no output side to list, or may be -1 if the "output"
;side is actually part of the input side (the "tertiary" input
;variables, as in a RENAME operation).
;
;IOQAT is the normal file-level routine to handle the /QUERY switch
;in all its variety (e.g., both ASK and TELL). IOQAT is normally used
;on input requests only, but is valid on output as well (but see below
;for IOQAA/IOQTT).
;
;IOQAA checks only /QUERY:ASK, and will skip (success) return if only
;(e.g.) /QUERY:TELL was specified. IOQAA is used for output creation to
;ask the user before the create is attempted (i.e., before the actual
;resultant file is known - what disk structure, etc.).
;
;IOQTT checks only /QUERY:TELL, and will skip (success) return always.
;IOQTT is used in conjunction with IOQAA to bracket the output creation
;attempt. IOQTT is called after the file has been created when the true
;resultant file information is known (e.g., which physical disk struc-
;ture, etc.).
;
;IOQET is used for error-message typeout to insure that whatever error
;message is being typed has been preceded by the appropriate file iden-
;tification sequence disirregardless of any /QUERY (and lack thereof)
;typed by the user.
;
;On /QUERY:ASK if the user rejects the file the REJECTED return will
;be taken with status $EFRJU in M0.
;
;On normal return the file(s) has(have) been listed if requested, and
;the file(s) is(are) acceptable if the user /QUERY:ASKed.
;
;Uses T1, T2, T3, T4.
ENTRY .IOQAT
INTERN IOQAT0, IOQAT1
.IOQAT: PUSHJ P,.SACIO## ;SET UP I/O CDB INDEX
IOQAT0: PUSHJ P,.SAVE4## ;NEED SOME P ACS HERE
IOQAT1: PUSHJ P,TSAV14## ;AND THE T'S AS WELL
MOVX T4,FX.QRA!FX.QRT;MATCH ON EITHER /QUERY:ASK OR /QUERY:TELL
JRST IOQR01 ;SEE IF ANYTHING TO DO
ENTRY .IOQAA
INTERN IOQAA0, IOQAA1
.IOQAA: PUSHJ P,.SACIO## ;SET UP I/O CDB INDEX
IOQAA0: PUSHJ P,.SAVE4## ;NEED SOME P ACS HERE
IOQAA1: PUSHJ P,TSAV14## ;AND THE T'S AS WELL
MOVX T4,FX.QRA ;MATCH ONLY ON /QUERY:ASK
JRST IOQR01 ;SEE IF ANYTHING TO DO
ENTRY .IOQTT
INTERN IOQTT0, IOQTT1
.IOQTT: PUSHJ P,.SACIO## ;SET UP I/O CDB INDEX
IOQTT0: PUSHJ P,.SAVE4## ;NEED SOME P ACS HERE
IOQTT1: PUSHJ P,TSAV14## ;AND THE T'S AS WELL
MOVX T4,FX.QRT ;MATCH ONLY ON /QUERY:TELL, IGNORE /QUERY:ASK
JRST IOQR01 ;SEE IF ANYTHING TO DO
ENTRY .IOQET
INTERN IOQET0, IOQET1
.IOQET: PUSHJ P,.SACIO ;GET TO I/O CONTEXT
IOQET0: PUSHJ P,.SAVE4## ;SAVE THE P'S
IOQET1: PUSHJ P,TSAV14 ;AND THE T'S TOO
SKIPE .IOQCT(T2) ;HAS THIS FILE BEEN "TELL"ED ALREADY?
JRST .POPJ1## ;YES, THAT'S ALL WE WANTED TO DO
MOVX P4,FX.QRT ;ALWAYS DO A TELL, NEVER AN ASK
JRST IOQT01 ;LIST THE FILE
;NOW FIGURE OUT WHAT WAS PASSED US IN SO FAR AS OUT=IN IS CONCERNED
;
;SINCE .CHKTM IS ALWAYS CALLED BEFORE .IOQAT (FOR THE INPUT FILE) IT IS
;SAFE TO USE THE "CURRENT" (.IOFSC) FILE SPEC BLOCK RATHER THAN THE
;ORIGINAL (.IOFSB) FILE SPEC BLOCK, ENABLING THE USER TO INDIVIDUALLY
;/QUERY THE VARIOUS BASIC FILE SPECIFICATIONS COMPOSING THE INPUT FILE
;EXPRESSION. FOR OUTPUT THE TWO ARE ALWAYS THE SAME (SO FAR).
IOQR01: CAIE T1,0 ;OUTPUT GIVEN?
CAMN T1,[-1] ;OR "FAKE" OUTPUT?
SKIPA P3,.IOCU3(T2) ;"FAKE", USE TERTIARY FILE SPEC BLOCK
MOVE P3,.IOFSC(T1) ;ADDRESS OF OUTPUT FILE SPEC BLOCK
SKIPE P4,T1 ;NO OUTPUT /QUERY IF NO OUTPUT
MOVE P4,.FXCTL(P3) ;OUTPUT CONTROL FLAGS
MOVE T3,.IOFSC(T2) ;ADDRESS OF INPUT FILE SPEC BLOCK
IOR P4,.FXCTL(T3) ;MERGE IN INPUT CONTROL FLAGS
AND P4,T4 ;MASK OUT EXTRANEOUS STUFF
TXNN P4,FX.QRT!FX.QRA;/QUERY:(ASK,TELL)?
JRST .POPJ1## ;NO, NOTHING TO DO THEN
;AT LEAST /QUERY:TELL WAS SPECIFIED SOMEWHERE (OR HERE FROM ERROR MESSAGE)
IOQT01: DMOVE P1,T1 ;SAVE CDB POINTERS FOR FUTURE REFERENCE
PUSHJ P,.TSPAC## ;DON'T CONFUSE POOR OLE BATCON
JUMPN P1,IOQT10 ;IF OUTPUT, THEN LIST IT
MOVEI T1,[ASCIZ\ + \] ;THE "CONCATENATION" SEPARATOR
MOVX T2,IM.IQC ;THE "CONCATENATION" FLAG
TDNE T2,.IOIOM(IO) ;IS THIS A "CONCATENATION" OPERATION?
PUSHJ P,.TSTRG## ;YES, PRETTY TERMINAL LISTING
JRST IOQT40 ;NOW GO LIST THE INPUT FILE
;LIST THE "OUTPUT" SIDE
IOQT10: XMOVEI T4,.TOCFN ;ASSUME FULL NETWORK FILE SPEC
SKIPE T2,.I1NOD(P1) ;GOT A NODE SPECIFICATION?
CAMN T2,.MYNOD## ;YES, IS IT LOCAL HOST?
XMOVEI T4,.TOCFL ;JUST NEED LOCAL FILE SPECIFICATION
SKIPL T1,P1 ;ADDRESS OF OUTPUT CDB
JRST IOQT17 ;LIST THE FILE SPECIFICATION
;HERE FOR "TERTIARY" INPUT AS THE "OUTPUT" LISTING (E.G., RENAME)
IOQT12: XMOVEI T4,.TOTFS ;WE WILL SPECIFY THE FILE SPEC COMPONETS
MOVX T2,FX.UDR!FX.UNM!FX.UEX!FX.UGN ;ONLY WANT THESE FIELDS
MOVE T1,P2 ;ADDRESS OF INPUT CDB FOR TERTIARY STRINGS
IOQT17: PUSHJ P,0(T4) ;LIST THE FILE SPECIFICATION
JFCL ;???
AOS .IOQCT(P1) ;NOTE THIS FILE HAS BEEN "TELL"ED
IOQT19: MOVEI T1,[ASCIZ\ <= \]; (MATCH ANGLE BRACKETS)>
PUSHJ P,.TSTRG## ;SEPARATE OUTPUT FROM INPUT
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;LIST INPUT SIDE
IOQT40: MOVE P3,.IOFSC(P2) ;GET INPUT FILE SPEC BLOCK
XMOVEI T4,.TOCFN ;ASSUME WANT FULL NETWORK FILE SPEC LISTED
SKIPE T2,.I1NOD(P2) ;INPUT NODE SPECIFIED?
CAMN T2,.MYNOD## ;YES, IS IT ME?
XMOVEI T4,.TOCFL ;JUST NEED LOCAL FILE SPEC LISTED
MOVE T1,P2 ;ADDRESS OF INPUT CDB
PUSHJ P,0(T4) ;LIST APPROPRIATE FILE SPECIFICATION
JFCL ;???
AOS .IOQCT(P2) ;COUNT UP .IOQAT CALLS FOR THIS FILE
;NOW CHECK FOR /QUERY:ASK
TXNE P4,FX.QRA ;/QUERY:ASK ON EITHER OUTPUT OR INPUT?
JRST IOQT60 ;YES
PUSHJ P,.TCRLF## ;NO, CAP OFF /QUERY:TELL OUTPUT
JRST .POPJ1## ;AND RETURN SUCCESSFULLY
;PROCESS /QUERY:ASK
IOQT60: PUSHJ P,.TSPAC## ;SPACE OVER A BIT
MOVEI T1,.ASKYN## ;ASSUME [Y/N]
TXNE P4,FX.QNY ;SOMEONE WANT [N/Y]?
MOVEI T1,.ASKNY## ;YES
PUSHJ P,(T1) ;CALL ASK ROUTINE
CAIA ;USER SAID "NO"
AOSA (P) ;SKIP RETURN SINCE USER SAID "YES"
MOVEI M0,$EFRJU ;EXCEPTION CODE REJECTED-BY-USER
POPJ P, ;RETURN AS APPROPRIATE
SUBTTL File-level local support routines
;FILOP -- PERFORM GENERIC LOCAL FILE OPERATION
;Call is:
;
; MOVX T1,<FNC>
; PUSHJ P,FILOP
; ERROR RETURN
; NORMAL RETURN
;
;Where <FNC> is the generic file operation to be performed (read, write,
;etc.).
;
;Register IO points to the I/O CDB.
;
;On error return M0 has an error code (protection failure, etc.).
;
;On normal return the file is OPENed for the appropriate accessibility
;and the I/O CDB is set as specified by the .IOIOC and .IOIOM control
;words (e.g., file parameters, buffer allocation, etc.).
;
;Uses registers T1, T2, T3, and T4.
FX$UIO=FX.MCY!FX.MEY!FX.DAM!FX.IOM ;USER SPECIFIED I/O MODE INFO
FILOP: PUSHJ P,.SAVE4## ;NEED SOME P'S FOR AWHILE
PUSHJ P,TSAV12## ;SAVE T1 AND T2 MOMENTARILY
MOVE P1,.IOCCF(IO) ;CHANNEL CONTROL FLAGS
TXNE P1,IO.NET ;ANY NETWORK ACTIVITY?
STOPCD <Network channel in call to FILOP>
CAIL T1,0 ;NEGATIVE IS ILLEGAL
CAILE T1,.IFMAX ;FUNCTION WE KNOW ABOUT?
JRST [MOVX M0,$EFIFO ;ILLEGAL FILE OPERATION
JRST .M0ERR##] ;SET ERROR
SKIPN P2,.IOFSC(IO) ;ENSURE PRESENCE OF "CURRENT" FILE SPEC BLOCK
STOPCD <No "current" FSB in FILOP>
MOVE P3,FIFNTB(T1) ;FILOP. FUNCTION AND CONTROL
TXNN P3,FO.UOC ;TERTIARY FUNCTION?
JRST FILO01 ;NO, NEED A CLEAN CHANNEL
;Continued on next page
;Continued from previous page
;HERE TO PERFORM A TERTIARY ACTION SUCH AS RENAME OR DELETE
FILT01: SKIPN T2,.IOCHN(IO) ;YES, GET ALREADY-OPENED CHANNEL
JRST [MOVX M0,$EICNO ;CHANNEL NOT OPEN
JRST .M0ERR##] ;SET ERROR
DPB T2,[POINTR P3,FO.CHN] ;SET EXTANT CHANNEL IN FUNCTION WORD
MOVEM P3,.I1FL3+.FOFNC(IO) ;SET FILOP. FUNCTION WORD
SETZM .I1FL3+.FOIOS(IO) ;NO I/O STATUS ('CUZ NO OPEN)
SETZM .I1FL3+.FODEV(IO) ;NO I/O DEVICE ('CUZ NO OPEN)
SETZM .I1FL3+.FOBRH(IO) ;NO I/O BUFFERS ('CUZ NO OPEN)
SETZM .I1FL3+.FONBF(IO) ;NO I/O BUFFERS ('CUZ NO OPEN)
XMOVEI P1,.I1LK3(IO) ;THE TERTIARY FILE BLOCK
HRLZM P1,.I1FL3+.FOLEB(IO) ;SET FILOP. RENAME/DELETE BLOCK
PUSHJ P,FLPA01 ;SET FILE PARAMETERS/ATTRIBUTES
JFCL ;HUH?
SETZM .I1FL3+.FOPAT(IO) ;SET FILOP. PATH BLOCK WORD
MOVE T2,.IOPPN(IO) ;GET ON-BEHALF-OF USER
MOVEM T2,.I1FL3+.FOPPN(IO) ;SET FILOP. ON-BEHALF-OF WORD
MOVSI T1,.FOMAX ;SIZE OF FILOP. BLOCK
HRRI T1,.I1FL3(IO) ;ADDRESS OF FILOP. BLOCK
FILOP. T1, ;PERFORM REQUESTED ACTION
JRST FILOEF ;FILOP. FAILED
JRST .POPJ1## ;FUNCTION SUCCEEDED
;HERE WHEN TIME TO "OPEN" A FILE
FILO01: TXNN P1,IO.OPN ;DOES THIS CHANNEL HAVE A FILE OPEN?
JRST FILO05 ;NO, ALL SET
PUSHJ P,IOABO0 ;KILL THE FILE
JFCL ;DUH?
MOVE T1,-T1(P) ;GET FUNCTION BACK AGAIN
FILO05: MOVEM P3,.I1FLP+.FOFNC(IO) ;SET FILOP. FUNCTION WORD
LDB T4,[POINTR .IOIOC(IO),IC.MOD] ;GET SPECIFIED FILE MODE
CAIG T4,.ICMAX ;ONE WE KNOW ABOUT?
SKIPGE T1,MOMDTB(T4) ;YES, IS IT LEGAL (IMPLEMENTED)?
JRST [MOVX M0,$EFIFM ;ILLEGAL FILE MODE
JRST .M0ERR##] ;GO SET ERROR CONDITION
MOVE T2,.IOIOM(IO) ;AND GET I/O MODE WORD
TXNE T2,IM.CMD ;FORCED TO USE .IOIOC MODE?
JRST FILO09 ;USE .IOIOC MODE
DMOVE T3,.FXCTL(P2) ;GET USER-SPECIFIED I/O CONTROL
MOVE T2,.IOIOC(IO) ;GET CDB I/O CONTROL
TXNE T3,FX.MCY ;USER SPECIFY /MACY11?
TXO T2,IC.MCY ;YES, NOTE IN THE CDB
TXNE T3,FX.MEY ;USER SPECIFY /MECY11?
TXO T2,IC.MCY!IC.MEY;YES, NOTE IN THE CDB
MOVEM T2,.IOIOC(IO) ;SET CDB I/O CONTROL
TXNN T3,FX$UIO ;USER SPECIFY I/O MODE INFO?
JRST FILO09 ;NO
LDB T1,[POINTR T3,FX.IOM] ;GET USER-SPECIFIED /IOMODE
LDB T2,[POINTR T3,FX.DAM] ;GET USER-SPECIFIED /DATAMODE
TXNE T3,FX.MCY!FX.MEY;USER WANT MACY11 PACKING?
MOVEI T1,.IOBIN ;YES, BINARY (36-BIT WORD) I/O THEN
CAIE T1,0 ;GOT BOTH A /IOMODE
CAIN T2,0 ;AND A /DATAMODE?
IORB T1,T2 ;NO, DEFAULT ONE FROM THE OTHER
MOVE T4,MDMOTB(T2) ;AND TRANSLATE INTO .IOIOC MODE
DPB T4,[POINTR .IOIOC(IO),IC.MOD] ;SET OPERATING MODE
FILO09: DPB T1,[POINTR .I1FLP+.FOIOS(IO),IO.MOD] ;SET I/O MODE
; NOTE .LKWLD/.SCWLD MAY HAVE SET IO.DEN/ETC.
SETZ T1, ;INITIALLY NO OPEN FLAGS
MOVE T2,.IOIOM(IO) ;GET MODE CONTROL WORD
TXNE T2,IM.PHS ;PHYSICAL ONLY?
TXO T1,UU.PHS ;YES
TXNE T2,IM.DEL ;DISABLE ERROR LOGGING?
TXO T1,UU.DEL ;YES
TXNE T2,IM.DER ;DISABLE ERROR RETRY?
TXO T1,UU.DER ;YES
TXNE T2,IM.AIO ;ASYCHRONOUS (NON-BLOCKING) I/O?
TXO T1,UU.AIO ;YES
TXNE T2,IM.LBF ;USE GENEROUS BUFFERING?
TXO T1,UU.LBF ;YES
TXO T1,UU.SOE ;ALWAYS SYNC ON ERROR
FILO10: IORB T1,.I1FLP+.FOIOS(IO) ;SET IN FILOP. DEVIOS WORD
SKIPN T2,.I1FLP+.FODEV(IO) ;DEVICE NAME SET BY .LKWLD CALL
STOPCD <No device name in FILO10>
SKIPN T4,.IOCHN(IO) ;DO WE HAVE A CHANNEL OPEN?
JRST FILO17 ;NO
MOVE T3,.I1FIO(IO) ;GET OLD OPEN FLAGS
XOR T3,T1 ;CONTRAST WITH PROPOSED OPEN FLAGS
TLNN T3,-1 ;ARE ALL OPEN FLAGS
CAME T2,.I1FIO+1(IO) ; AND DEVICE NAME SAME AS CURRENTLY OPEN?
JRST FILO17 ;NO, NEW DEVICE/FLAGS, MUST DO FULL "OPEN"
MOVE T3,.I1FLP+.FOFNC(IO) ;YES, GET FILOP. FUNCTION WORD
TXZ T3,FO.ASC ;WE DON'T WANT A NEW CHANNEL,
TXO T3,FO.UOC ;WE WANT TO KEEP THE OLD CHANNEL
DPB T4,[POINTR T3,FO.CHN] ;SET THE CHANNEL TOO!
MOVEM T3,.I1FLP+.FOFNC(IO) ;SET FILOP. MODIFIED FUNCTION WORD
JRST FILO20 ;AND CONTINUE WITH FILOP. SETUP
FILO17: DMOVEM T1,.I1FIO(IO) ;SET FOR NEXT PASS THROUGH HERE
SKIPN .IOCHN(IO) ;GOT A "CHANNEL" IN USE
JRST FILO20 ;NOPE
PUSHJ P,IORLS0 ;YES, BLASTETH IT
JFCL ;DUH?
; AND SETUP REST OF FILOP. BLOCK
FILO20: MOVE T1,-T1(P) ;RETRIEVE REQUESTED FUNCTION AGAIN
MOVE P1,FICFTB(T1) ;GET NIFTY (.IOCCF) FLAGS
IORB P1,.IOCCF(IO) ;SET IN CDB
MOVSI T1,.IOOBH(IO) ;OUTPUT RING HEADER CONTROL BLOCK
HRRI T1,.IOIBH(IO) ;INPUT RING HEADER CONTROL BLOCK
MOVEM T1,.I1FLP+.FOBRH(IO) ;SET FILOP. BUFFER HEADER WORD
SETZM .I1FLP+.FONBF(IO) ;SET FILOP. BUFFER COUNT WORD
; (WE WILL BUILD BUFFERS LATER)
XMOVEI P1,.I1LKP(IO) ;ADDRESS OF LOOKUP BLOCK
HRRZM P1,.I1FLP+.FOLEB(IO) ;SET FILOP. LOOKUP BLOCK WORD
PUSHJ P,FLPA01 ;SET FILOP. BLOCK PARAMETERS/ATTRIBUTES
JFCL ;DUH?
MOVSI T1,.PTMAX ;LENGTH OF [RETURNED] PATH BLOCK
HRRI T1,.I1PT2(IO) ;ADDRESS OF [RETURNED] PATH BLOCK
MOVEM T1,.I1FLP+.FOPAT(IO) ;SET FILOP. PATH BLOCK WORD
MOVE T1,.IOPPN(IO) ;ON-BEHALF-OF-USER WORD
MOVEM T1,.I1FLP+.FOPPN(IO) ;SET FILOP. OTHER-USER WORD
FILO30: MOVSI T1,.FOMAX ;LENGTH OF FILOP. BLOCK
HRRI T1,.I1FLP(IO) ;ADDRESS OF FILOP. BLOCK
MOVE T2,.I1FLP+.FOFNC(IO) ;*** THE FUNCTION/CHANNEL WORD
MOVE T3,.I1FLP+.FODEV(IO) ;*** THE DEVICE TO BE USED
TXNE T2,FO.UOC ;*** USING ALREADY-OPENED CHANNEL?
SETZM .I1FLP+.FODEV(IO) ;*** YES, MAKE SURE MONITOR NOT FOOLING US
FILOP. T1, ;GO BEAT ON MONITOR FILE SYSTEM
TDZA M0,M0 ;FLAG ERROR
SETO M0, ;FLAG SUCCESS
MOVEM T3,.I1FLP+.FODEV(IO) ;*** RESET DEVICE WORD
LDB T4,[POINTR .I1FLP+.FOFNC(IO),FO.CHN] ;GET NEW CHANNEL (IF ANY)
MOVEM T4,.IOCHN(IO) ;AND SET IN THE CDB
JUMPL M0,FILO50 ;PROCEED IF FILOP. SUCCEEDED
MOVE T2,.IOIOM(IO) ;FAILED, GET I/O MODE CONTROL
CAIN T1,ERAEF% ;WAS ERROR "ALREADY EXISTING FILENAME"?
TXNN T2,IM.UNQ ;DID USER REQUEST A UNIQUE FILE NAME?
JRST FILOEF ;NO, RETURN ERROR TO USER
PUSHJ P,FLPUQ1 ;TRY TO INCREMENT THE FILENAME
JRST FILOEG ;OH WELL, WE TRIED (ERROR CODE IN M0)
MOVX T1,FO.ASC ;THE "ASSIGN CHANNEL NUMBER" FLAG
ANDCAM T1,.I1FLP+.FOFNC(IO) ;WE WILL RE-USE THE CHANNEL
MOVX T1,FO.UOC ;THE "USE-OPEN-CHANNEL"
IORM T1,.I1FLP+.FOFNC(IO) ;AS I SAID, . . .
JRST FILO30 ;GO TRY AGAIN
;WE HAVE SUCCESSFULLY OPENED THE CHANNEL, NOW FIGURE OUT WHAT WE GOT
FILO50: MOVX P1,IO.INI!IO.DEV!IO.OPN ;THE FILE-IS-OPEN BIT(S)
IORB P1,.IOCCF(IO) ;SET IN THE CDB
MOVE T3,.IOCHN(IO) ;FILE I/O CHANNEL
SETZ T2, ;JUNK WORD
MOVE T1,[2,,T2] ;DEVSIZ ARG POINTER TO
DEVSIZ T1, ;READ BUFFER SIZE
STOPCD <DEVSIZ failed in FILO50>
SUBI T1,3 ;ADJUST TO TRUE DATA SIZE
MOVEM T1,.I1DSZ(IO) ;SAVE FOR LATER
MOVE T4,.IOCHN(IO) ;FILE I/O CHANNEL
DEVTYP T4, ;SEE WHAT TYPE OF DEVICE WE GOT
STOPCD <DEVTYP failed in FILO50>
MOVEM T4,.I1DTY(IO) ;SAVE IN TOPS-10 BLOCK
LDB T3,[POINTR T4,TY.DEV] ;GET DEVICE TYPE CODE
MOVEM T3,.IODTY(IO) ;SET IN CDB
MOVE T2,.IOCHN(IO) ;GET CHANNEL AGAIN
DEVCHR T2, ;GET DEVICE CHARACTERISTICS
MOVEM T2,.I1DCH(IO) ;SET IN TOPS-10 BLOCK
MOVE T1,.I1PT2+.PTSTR(IO) ;GET RETURNED STRUCTURE NAME
CAIN T3,.TYDSK ;IS RESULTANT FILE ON A TRUE DISK?
JUMPN T1,FILO53 ;YES, RETURNED PATH BLOCK HAS STRUCTURE
;(UNLESS NUL: IN WHICH CASE WE NEED DEVNAM)
;FIGURE OUT THE DEVICE'S REAL NAME (E.G., MTA2 RATHER THAN MT)
MOVE T1,.IOCHN(IO) ;I/O CHANNEL
DEVNAM T1, ;GET DDB DEVICE NAME
STOPCD <DEVNAM failed in FILO50>
FILO53: MOVEM T1,.I1FLP+.FODEV(IO) ;SET REAL DEVICE OPENED
MOVEM T1,.I1DEV(IO) ;SET TRUE DEVICE NAME
MOVEI T1,.I1PT2(IO) ;RETURNED PATH BLOCK
MOVEM T1,.I1LKP+.RBPPN(IO) ;SET REAL FILE DIRECTORY PATH
SETZM .I1GEN(IO) ;AND NEVER A FILE GENERATION
MOVE T1,.MYNOD## ;PICK UP LOCAL HOST NODE NAME
MOVEM T1,.I1NOD(IO) ;SET FILE NODE NAME
PUSHJ P,FILRA ;GENERATE NAME STRINGS AS SOON AS POSSIBLE
JFCL ;HO HUM
;VERIFY FILE ALLOCATION (IF NEEDED)
MOVE T3,.IODTY(IO) ;GET COPY OF "DEVICE TYPE"
CAIE T3,.TYDSK ;IS THIS A TRUE DISK?
JRST FILO60 ;NO, FILE ALLOCATION MEANINGLESS
MOVE T2,.FXCTL(P2) ;GET I/O CONTROL SWITCHES
TXNN T2,FX.ALC!FX.CTG;IS FILE ALLOCATION IMPORTANT?
JRST FILO60 ;NO
MOVE T2,.FXEST(P2) ;GET /ALLOCATE VALUE
ADDI T2,177 ;ROUND UP AND
LSH T2,-7 ;TRUNCATE TO NUMBER OF 128(10) WORD BLOCKS
CAMG T2,.I1LKP+.RBALC(IO) ;DID MONITOR GIVE US ENOUGH?
JRST FILO60 ;YEAH, ALL SET WITH FILE THEN
;FILE HAS INSUFFICIENT PHYSICAL ALLOCATION, TRANSLATE TO ERPOA% AND ABORT
;THE FILE CREATION. /ALLOCATE WORKS VIA AN "ESTIMATING ENTER", SO WE MUST
;ENFORCE THE ALLOCATION MANUALLY (AS CONTRASTED WITH /CONTIGUOUS WHICH IS
;THE TRUE "ALLOCATING ENTER").
MOVEI T1,ERPOA% ;FILOP. ERROR CODE FOR PARTIAL ALLOCATION
HRRM T1,.I1LKP+.RBEXT(IO) ;ANOTHER PLACE TO HIDE IT
PJRST FILOEF ;TREAT AS FILOP. FAILURE . . .
;SELECT MODE BASED ON INPUT FILE, IF THE USER WANTS IT
FILO60: LDB P4,[POINTR .IOIOC(IO),IC.MOD] ;GET FILE MODE
MOVE T1,.IOIOM(IO) ;GET MODE CONTROL FLAGS
TXNN T1,IM.CMD ;OVERRIDING IOC MODE?
TXNN T1,IM.SMD ;OR REQUESTING SELECT MODE DEFAULT?
JRST FILO63 ;USE .IOIOC MODE AS IS
MOVE T1,.FXCTM(P2) ;GET FSB CONTROL MASK
TXNE T1,FX$UIO ;USER SPECIFY I/O MODE CONTROL?
JRST FILO63 ;YES, NO INPUT FILE DEFAULTING
MOVE T1,.IODTY(IO) ;DEVICE TYPE
CAIE T1,.TYDSK ;IS IT A DISK?
JRST FILO63 ;NO, LEAVE WELL ENOUGH ALONE
LDB P4,[POINTR .I1LKP+.RBPRV(IO),RB.MOD] ;GET CREATED I/O MODE
MOVE P4,MDMOTB(P4) ;CONVERT TO OUR MODE
DPB P4,[POINTR .IOIOC(IO),IC.MOD] ;AND SET IN I/O CONTROL WORD
MOVE T1,MOMDTB(P4) ;SELECT APPROPRIATE BUFFERED I/O MODE
DPB T1,[POINTR .I1FLP+.FOIOS(IO),IO.MOD] ;AND SET AS IN OPEN
;SELECT PROPER I/O MODE
FILO63: HRRZ T3,.I1FLP+.FOIOS(IO) ;GET I/O STATUS BITS AS IN OPEN TIME
HRLZ T2,.IOCHN(IO) ;GET OPENED I/O CHANNEL
HRRI T2,.FOSET ;FILOP. "SETSTS" FUNCTION
MOVE T1,[2,,T2] ;FILOP. ARG POINTER TO
FILOP. T1, ;SELECT ACTUAL I/O MODE AND OPTIONS
STOPCD <FILOP SETSTS failed in FILO55>
;NOW SELECT BYTE SIZES
FILO65: SETZ T1, ;NO BYTE SIZES YET
SKIPLE .FXBSZ(P2) ;DID USER SPECIFY /BYTESIZE?
HRL T1,.FXBSZ(P2) ;YES, USE HIS BYTESIZE
SKIPLE .FXFSZ(P2) ;DID USER SPECIFY /FRAMESIZE?
HRR T1,.FXFSZ(P2) ;YES, USE HER FRAMESIZE
TLNE T1,-1 ;LACKING A DATA SIZE?
TRNN T1,-1 ;OR A FRAME SIZE?
TSO T1,T1 ;YES, DEFAULT ONE FROM THE OTHER
SETZ T2, ;NO MODE YET
DMOVE T3,.FXCTL(P2) ;GET USER-SPECIFIED I/O CONTROL
TXNE T4,FX.DAM ;DID USER SPECIFY /DATAMODE?
LDB T2,[POINTR T3,FX.DAM] ;YES, GET IT
TXNE T4,FX.IOM ;DID USER SPECIFY /IOMODE?
LDB T2,[POINTR T3,FX.IOM] ;YES, GET IT INSTEAD
MOVE T2,MDMOTB(T2) ;CONVERT "I/O MODE" TO "FILE MODE"
MOVE T2,MOSZTB(T2) ;CONVERT "FILE MODE" TO BYTE/FRAME SIZE
TXNN T4,FX.DAM!FX.IOM;DID USER SPECIFY /DATAMODE OR /IOMODE?
SETZ T2, ;NO, NEVER MIND, NO BYTE SIZES HERE
TLNN T1,-1 ;GOT A BYTE SIZE?
HLL T1,T2 ;NO, DEFAULT FROM I/O/DATAMODE
TRNN T1,-1 ;GOT A FRAME SIZE?
HRR T1,T2 ;NO, DEFAULT FROM I/O/DATAMODE
TLNE T1,-1 ;LACKING A DATA SIZE?
TRNN T1,-1 ;OR A FRAME SIZE?
TSO T1,T1 ;YES, DEFAULT ONE FROM THE OTHER
TLNN T1,-1 ;LACKING A DATA BYTE SIZE?
HLL T1,.IODBS(IO) ;YES, USE USER DEFAULT
TRNN T1,-1 ;LACKING A FRAME BYTE SIZE?
HRR T1,.IODBS(IO) ;YES, USE USER DEFAULT
MOVE T2,.IOUBS(IO) ;GET USER-OVERRIDDING FRAME/BYTE SIZE(S)
TLNE T2,-1 ;OVERRIDDING DATA BYTE SIZE?
HLL T1,T2 ;YES
TRNE T2,-1 ;OVERRIDDING FRAME SIZE?
HRR T1,T2 ;YES
TLNE T1,-1 ;LACKING A DATA SIZE?
TRNN T1,-1 ;OR A FRAME SIZE?
TSO T1,T1 ;YES, DEFAULT IT FROM THE OTHER
CAIN T1,0 ;GOT A BYTE SIZE YET?
MOVE T1,MOSZTB(P4) ;GET STANDARD BYTE SIZES
MOVE T2,.IOIOC(IO) ;I/O CONTROL
TXNE T2,IC.MCY!IC.MEY;MACY11 PACKED?
MOVE T1,[^D08,,^D08] ;YES, 8-BIT DATA PACKED INTO 8-BIT FRAMES THEN
HLRZM T1,.IOBSZ(IO) ;SET LOGICAL DATA BYTE SIZE
HRRZM T1,.IOFSZ(IO) ;SET PHYSICAL DATA FRAME SIZE
TXNE T2,IC.MCY!IC.MEY;MACY11 PACKED?
HRRI T1,^D36 ;YES, ILMCB/OLMCB WANT 36-BIT BYTE POINTERS!
DPB T1,[POINTR .IOIBP(IO),<<^O77>B<^D11>>] ;SET INPUT FRAME SIZE
DPB T1,[POINTR .IOOBP(IO),<<^O77>B<^D11>>] ;SET OUTPUT FRAME SIZE
;SET RECORD FORMAT AS APPROPRIATE
FILO68: MOVE T4,.IOIOM(IO) ;GET MODE CONTROL FLAGS
TXNE T4,IM.CMD ;OVERRIDING IOC MODE?
JRST FILO70 ;YES, USE .IOIOC MODE AS IS
TXNN T2,IC.MCY!IC.MEY;MACY11-PACKING?
TDZA T1,T1 ;NO, THEN NO RECORD FORMATTING
MOVEI T1,.ICRFV ;YES, ASSUME VARIABLE-LENGTH ON G.P.'S
LDB T3,[POINTR .FXCTM(P2),FX.RFM] ;/RECFORMAT SWITCH MASK
CAIE T3,0 ;WAS A /RECFORMAT SWITCH TYPED?
LDB T1,[POINTR .FXCTL(P2),FX.RFM] ;YES, GET /RECFORMAT VALUE
DPB T1,[POINTR .IOIOC(IO),IC.RFM] ;RETURN RECORD FORMAT
;SETUP RETURNED-TO-USER VALUES
FILO70: PUSHJ P,FILCH ;GENERATE DEVICE/FILE CHARACTERISTICS
JFCL ;HO HUM
PUSHJ P,FILPA ;GENERIC DEVICE/FILE PARAMETERS/ATTRIBUTES
JFCL ;HO HUM
;VERIFY BLOCKSIZE
FILO71: MOVE T4,.I1DTY(IO) ;DEVTYP WORD
HRRZ T1,.IOUBF(IO) ;USER EXERTING EXPLICIT BUFFER CONTROL?
JUMPE T1,FILO72 ;NO
HRRZ T2,.I1DSZ(IO) ;MONITOR'S BLOCKSIZE
TXNN T4,TY.VAR ;VARIABLE BLOCK SIZE ALLOWED?
CAIN T1,T2 ;NO, USER DIFFERENT FROM MONITOR?
JRST FILO72 ;VARIABLE ALLOWED OR BOTH THE SAME
CAML T1,T2 ;IS USER'S BLOCKSIZE BIGGER THAN MONITOR
TXNE P1,IO.OUT ;AND NOT USED FOR OUTPUT?
JRST FILO72 ;TOO BIG IS OK ON INPUT
MOVEI M0,$EFVBI ;ASSUME ERROR
JRST .M0IOZ## ;SET ERROR AND ZAP I/O CHANNEL
;BUFFERSIZE IS OK, CHECK DIRECTION OF I/O
FILO72: MOVEI M0,$EFILI ;PRESET ILLEGAL TO DO INPUT
TXNE P1,IO.INP ;USER WANT TO DO INPUT?
TXNE T4,TY.IN ;YES, DOES DEVICE SUPPORT INPUT?
CAIA ;INPUT SIDE OK
JRST .M0IOZ## ;SET ERROR AND ZAP I/O CHANNEL
MOVEI M0,$EFILO ;PRESET ILLEGAL TO DO OUTPUT
TXNE P1,IO.OUT ;USER WANT TO DO OUTPUT?
TXNE T4,TY.OUT ;YES, DOES DEVICE SUPPORT OUTPUT?
CAIA ;OUTPUT SIDE OK
JRST .M0IOZ## ;SET ERROR AND ZAP I/O CHANNEL
;NOW CALCULATE BUFFERS ALLOCATION
HRRZ T1,.IOUBF(IO) ;USER-SPECIFIED BLOCKSIZE
TRNN T1,-1 ;DID HE?
HRRZ T1,.I1DSZ(IO) ;NONE, USE MONITOR'S
ADDI T1,3 ;ALLOW FOR INDIVIDUAL BUFFER HEADERS
HLRZ T2,.IOUBF(IO) ;USER-SPECIFIED BUFFER COUNT
JUMPN T2,FILO75 ;USE HIS IF ANY GIVEN
HLRZ T2,.I1DSZ(IO) ;OTHERWISE USE MONITOR DEFAULTS
SKIPN .IODBF(IO) ;USER EXERTING CONTROL OVER ALLOCATION?
JRST FILO75 ;NO, USE MONITOR DEFAULTS
HRRZ T2,.IODBF(IO) ;YES, MAXIMUM SPACE FOR IO BUFFERS
IDIVI T2,(T1) ;SEE HOW MANY BUFFERS FIT
CAIG T2,0 ;AT LEAST ONE?
MOVEI T2,1 ;NO, ALWAYS ROOM FOR ONE!
HLRZ T3,.IODBF(IO) ;DEFAULT MAXIMUM BUFFERS
CAIG T3,0 ;USER GIVE COUNT MAX?
MOVE T3,T2 ;NO
CAILE T2,T3 ;ARE WE GENERATING TOO MANY BUFFERS?
MOVE T2,T3 ;YES, USE USER MAXIMUM THEN
FILO75: TXNE P1,IO.RND ;DOING RANDOM ACCESS I/O?
MOVEI T2,1 ;YES, ALWAYS MAXIMUM OF ONE!
SUBI T1,3 ;REDUCE TO DATA BUFFER SIZE
SKIPLE .IOMBF(IO) ;MAXIMUM ALLOCATION LIMIT GIVEN?
CAMLE T1,.IOMBF(IO) ;YES, CAN WE FIT?
CAIA ;OK
JRST [MOVEI M0,$EFBTB ;BLOCKSIZE TOO BIG
JRST .M0IOZ##] ;SET ERROR AND ZAP I/O CHANNEL
MOVEM T1,.IOBLW(IO) ;SAVE BUFFER SIZE (36-BIT WORDS)
MOVEM T2,.IOBLC(IO) ;SAVE COUNT OF BUFFERS
MOVEI T2,^D36 ;BITS PER -10 WORD
IDIV T2,.IOFSZ(IO) ;T2:=BYTES PER -10 WORD
IMUL T1,T2 ;T1:=BUFFER SIZE IN TERMS OF DATA BYTES
MOVEM T1,.IOBLS(IO) ;SET THAT FOR INTERESTED PARTIES
;SELECT I/O SERVICE ROUTINES
FILOS: XMOVEI T1,.IOIIN## ;LOCAL INITIAL ISR
TXNN P1,IO.INP ;SET FOR INPUT?
XMOVEI T1,.IOIIE## ;NO, THEN SELECT ERROR ISR
MOVEM T1,.IOISR(IO) ;SET INPUT SERVICE ROUTINE IN CDB
XMOVEI T1,.IOOIN## ;LOCAL INITIAL OSR
TXNN P1,IO.OUT ;SET FOR OUTPUT?
XMOVEI T1,.IOOIE## ;NO, THEN SELECT ERROR OSR
MOVEM T1,.IOOSR(IO) ;SET OUTPUT SERVICE ROUTINE IN CDB
;ALL DONE
JRST .POPJ1## ;RETURN WITH OPEN FILE
;HERE FOR FILOP. ERROR
;
;Since we can never succeed in outguessing this and future monitors(*),
;stomp on the channel and clean it up.
;
;(*) for example, an ERNSD% (no such device) error returns a channel
;to us, but has not OPENed any device on the channel!!!
FILOEF: ANDI T1,-1 ;IGNORE "JUNK" IN LH
CAILE T1,FILOEL ;ERROR CODE WITHIN KNOWN BOUNDARIES?
SETO T1, ;NO, PITCH IT
SKIPA P2,FILOET(T1) ;GET INTERNAL EXCEPTION CODE
FILOEG: MOVE P2,M0 ;ENTER HERE WITH INTERNAL CODE IN M0
SKIPE T2,.I1FLP+.FODEV(IO) ;GET MOST-RECENTLY USED DEVICE CODE
MOVEM T2,.I1DEV(IO) ;SET SO ERROR MESSAGES HAVE SOMETHING TO TYPE
PUSHJ P,FILRA ;SETUP NAME STRINGS FOR ERROR MESSAGES
JFCL ;HO HUM
SKIPN T4,.IOCHN(IO) ;GOT AN I/O CHANNEL?
JRST FILOE5 ;IF NONE, JUST CONVERT ERROR CODE
MOVX T3,IO.DEV!IO.OPN;ASSUME A FILE IS OPEN
IORM T3,.IOCCF(IO) ; (JUST IN CASE, CLEARED AS NEEDED BELOW)
MOVE T1,T4 ;I/O CHANNEL
DEVTYP T1, ;GET DEVTYP FLAGS
SETZ T1, ;OH WELL, THE MONITOR IS AT IT AGAIN
MOVEM T1,.I1DTY(IO) ;SAVE ON G.P.'S
LDB T1,[POINTR T1,TY.DEV] ;EXTRACT DEVICE TYPE
CAIE T1,.TYDSK ;LOOKING AT A DISK?
JRST FILOE2 ;NO
MOVEM T4,.I1NSP+.DCNAM(IO) ;YES, SET CHANNEL IN DSKCHR BLOCK
MOVSI T2,.I1NSL ;LENGTH (OF SCRATCH/DSKCHR BLOCK)
HRRI T2,.I1NSP(IO) ; AND ADDRESS OF DSKCHR BLOCK TO
DSKCHR T2, ;READ ABOUT THAT STRUCTURE/FILE
JRST FILOE2 ;FORGET IT
CAIE P2,$EFNRM ;WAS ERROR "NO ROOM"
JRST FILOE2 ;NO
MOVEI P2,$EFQTA ;ASSUME "QUOTA EXHAUSTED"
SKIPG .I1NSP+.DCUNT(IO) ;ANY ROOM LEFT ON THAT STR?
MOVEI P2,$EFFUL ;NO, THEN ERROR IS "DEVICE FULL"
FILOE2: MOVX T3,$E$LVL ;ERROR SEVERITY LEVEL
AND T3,P2 ;EXTRACT THE SEVERITY LEVEL
CAILE T3,EL$FTL ;LESS THAN DEADLY (EL$FTX) ERROR?
JRST FILOE3 ;NO, CHANNEL IN "UNSAFE" STATE, KRUMP ON IT
; SOME ERRORS, SUCH AS PROTECTION FAILURE,
; RETURN A DEVICE/CHANNEL, EVEN THOUGH THE
; FILOP. "FAILED" - THIS IS OK, BUT OTHER
; ERRORS (DEVICE-CLASS, E.G.,NO SUCH DEVICE)
; WILL ACTUALLY RETURN A FO.ASC CHANNEL, BUT
; NO DEVICE IS OPENED ON SAID CHANNEL!!!!!
;INNOCOUS ERROR, CHANNEL SHOULD STILL BE SAFE, JUST "CLOSE" AND KEEP IT
PUSHJ P,IOABO0 ;TRY TO SIMPLY CLOSE CHANNEL (ABORT THE FILE)
JRST FILOE3 ;OH WELL, KILL THE CHANNEL
JRST FILOE5 ;RETURN ERROR CODE (KEEPING THE OPEN CHANNEL)
;SEVERE ERROR, TAKE NO CHANCES, GET RID OF THE CHANNEL
FILOE3: PUSHJ P,IORLS0 ;GET RID OF IT, WHATEVER IT IS
JFCL ;HO HUM
SKIPE .IOCHN(IO) ;SHOULDN'T HAVE A I/O CHANNEL ANYMORE
STOPCD <I/O channel still set in FILOE3>
FILOE5: MOVE M0,P2 ;RETURN EXCEPTION CODE IN M0
POPJ P, ;NO, TAKE ERROR/EXCEPTION RETURN
;FILOP. ERROR TO INTERNAL ERROR TRANSLATION TABLE
DEFINE X(A),<EXP A>
X $EFXXX ;------ (--) UNTRANSLATABLE
FILOET: X $EFFNF ;ERFNF% (00) FILE NOT FOUND
X $EFDNF ;ERIPP% (01) UFD (DIRECTORY) NOT FOUND
X $EFPRT ;ERPRT% (02) PROTECTION FAILURE
X $EFFBM ;ERFBM% (03) FILE BEING MODIFIED
X $EFAEF ;ERAEF% (04) ALREADY EXISTING FILENAME
X $EFISU ;ERISU% (05) ILLEGAL SEQUENCE OF UUOS
X $EFRIB ;ERTRN% (06) RIB OR DIRECTORY READ ERROR
X $EFNSF ;ERNSF% (07) NOT A SAVE FILE
X $EFNEC ;ERNEC% (10) NOT ENOUGH CORE
X $EFDNA ;ERDNA% (11) DEVICE NOT AVAILABLE
X $EFNSD ;ERNSD% (12) NO SUCH DEVICE
X $EFILU ;ERILU% (13) ILLEGAL MONITOR CALL
X $EFNRM ;ERNRM% (14) NO ROOM
X $EFWLK ;ERWLK% (15) WRITE LOCK
X $EFTBL ;ERNET% (16) NOT ENOUGH TABLE SPACE
X $EFPOA ;ERPOA% (17) PARTIAL ALLOCATION
X $EFBNF ;ERBNF% (20) BLOCK NOT FREE
X $EFCSD ;ERCSD% (21) CAN'T SUPERSEDE DIRECTORY
X $EFDNE ;ERDNE% (22) CAN'T DELETE NON-EMPTY DIRECTORY
X $EFSNF ;ERSNF% (23) SFD NOT FOUND
X $EFSLE ;ERSLE% (24) SEARCH LIST EMPTY
X $EFLVL ;ERLVL% (25) SFD'S NESTED TOO DEEPLY
X $EFNCE ;ERNCE% (26) NO-CREATE ON FOR DSK:
X $EFSNS ;ERSNS% (27) SEGMENT NOT ON SWAP, OR LOCKED
X $EFFCU ;ERFCU% (30) CAN'T UPDATE FILE
X $EFLOH ;ERLOH% (31) LOSEG OVERLAPS HISEG
X $EFNLI ;ERNLI% (32) NOT LOGGED IN
X $EFFLK ;ERENQ% (33) OUTSTANDING ENQ LOCKS STILL SET
X $EFBED ;ERBED% (34) BAD .EXE DIRECTORY
X $EFBEE ;ERBEE% (35) BAD .EXE EXTENSION
X $EFDTB ;ERDTB% (36) .EXE DIRECTORY TOO BIG
X $EFENC ;ERENC% (37) EXCEEDED NETWORK CAPACITY (TSK)
X $EFTNA ;ERTNA% (40) TASK DEVICE NOT AVAILABLE (TSK)
X $EFNSN ;ERUNN% (41) UNDEFINED NETWORK NODE
X $EFSIU ;ERSIU% (42) SFD IS IN USE (RENAME)
X $EFNDR ;ERNDR% (43) FILE HAS NDR LOCK (DELETE)
X $EFJCH ;ERJCH% (44) JOB COUNT HIGH (TOO MANY ACCESSES)
X $EFSSL ;ERSSL% (45) CAN'T RENAME SFD TO LOWER LEVEL
X $EFCNO ;ERCNO% (46) CHANNEL NOT OPEN
X $EFDDU ;ERDDU% (47) DEVICE "DOWN" AND UNUSEABLE
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
X $EFDRS ;ERDRS% (50) DEVICE IS RESTRICTED
X $EFDCM ;ERDCM% (51) DEVICE IS CONTROLLED BY MDA
X $EFDAJ ;ERDAJ% (52) DEVICE ALLOCATED TO ANOTHER JOB
X $EFIDM ;ERIDM% (53) DEVICE DATA MODE ILLEGAL
X $EFUOB ;ERUOB% (54) UNDEFINED OPEN BITS
X $EFDUM ;ERDUM% (55) DEVICE IN USE ON MPX: CHANNEL
X $EFNPC ;ERNPC% (56) NO PER-PROCESS SPACE FOR CHANTAB
X $EFNFC ;ERNFC% (57) NO FREE CHANNELS
X $EFUFF ;ERUFF% (60) UNDEFINED FILOP. FUNCTION
X $EFCTB ;ERCTB% (61) CHANNEL TOO BIG
X $EFCIF ;ERCIF% (62) CHANNEL ILLEGAL FOR FUNCTION
X $EFACR ;ERACR% (63) ADDRESS CHECK READING ARG LIST
X $EFACS ;ERACS% (64) ADDRESS CHECK WRITING ARG LIST
X $EFNZA ;ERNZA% (65) NEGATIVE OR ZERO ARG LIST COUNT
X $EFATS ;ERATS% (66) ARGUMENT LIST TOO SHORT
FILOEL==.-FILOET ;MAX KNOWN FILOP. ERROR CODE
;VARIOUS CONVERSION TABLES FOR FILO??
;FROM FILE OPERATION TO FILOP. FUNCTION CODE
FIFNTB: FO.PRV!FO.ASC+.FORED ;.IFFND -- FIND A FILE
FO.PRV!FO.ASC+.FORED ;.IFRED -- READ A FILE
FO.PRV!FO.ASC+.FOWRT ;.IFWRT -- WRITE A FILE
FO.PRV!FO.ASC+.FOAPP ;.IFAPP -- APPEND [TO] A FILE
FO.PRV!FO.ASC+.FOSAU ;.IFSAU -- SINGLE-ACCESS UPDATE
FO.PRV!FO.ASC+.FOMAU ;.IFMAU -- MULTI-ACCESS UPDATE
FO.PRV!FO.UOC+.FODLT ;.IFDLT -- DELETE OPEN FILE
FO.PRV!FO.UOC+.FORNM ;.IFRNM -- RENAME OPEN FILE
;FROM FILE OPERATION TO CHANNEL CONTROL BITS
FICFTB: EXP 0 ;.IFFND -- OK DEFAULT MODE
EXP IO.INP ;.IFRED -- OK DEFAULT, WILL WANT INPUT
EXP IO.OUT ;.IFWRT -- WILL WANT OUTPUT
EXP IO.OUT ;.IFAPP -- WILL WANT OUTPUT
EXP IO.INP!IO.OUT ;.IFSAU -- WILL WANT INPUT AND OUTPUT
EXP IO.INP!IO.OUT ;.IFMAU -- WILL WANT INPUT AND OUTPUT
EXP 0 ;.IFDLT -- NO I/O
EXP 0 ;.IFRNM -- NO I/O
;FILE MODE TO I/O MODE
MOMDTB: EXP .IOASC ;.ICDEF -- DEFAULT (7-BIT ASCII)
EXP .IOASL ;.ICASC -- ASCII (7-BIT)
EXP .IOAS8 ;.ICAS8 -- ASCII (8-BIT)
EXP -1 ;.ICEBC -- EBCDIC (RESERVED)
EXP .IOPIM ;.ICPIM -- PACKED IMAGE
EXP .IOIMG ;.ICIMG -- IMAGE 36-BIT BYTES
EXP .IOBYT ;.ICBYT -- BINARY 8-BIT BYTES
EXP .IOBIN ;.ICBIN -- BINARY 36-BIT BYTES
;FILE MODE TO BYTE AND FRAME SIZE
MOSZTB: XWD ^D07, ^D07 ;.ICDEF -- DEFAULT (7-BIT ASCII)
XWD ^D07, ^D07 ;.ICASC -- ASCII (7-BIT)
XWD ^D08, ^D08 ;.ICAS8 -- ASCII (8-BIT)
XWD ^D00, ^D00 ;.ICEBC -- EBCDIC (RESERVED)
XWD ^D08, ^D08 ;.ICPIM -- PACKED IMAGE
XWD ^D36, ^D36 ;.ICIMG -- IMAGE
XWD ^D08, ^D08 ;.ICBYT -- BINARY 8-BIT BYTES
XWD ^D36, ^D36 ;.ICBIN -- BINARY 36-BIT BYTES
;I/O MODE TO FILE MODE
MDMOTB: EXP .ICASC ;.IOASC -- ASCII
EXP .ICASC ;.IOASL -- ASCII
EXP .ICPIM ;.IOPIM -- PACKED IMAGE
EXP .ICBYT ;.IOBYT -- BYTE (8-BIT)
EXP .ICAS8 ;.IOAS8 -- ASCII (8-BIT)
EXP .ICIMG ;****** -- RESERVED FOR DEC
EXP .ICIMG ;****** -- RESERVED FOR CUSTOMER
EXP .ICIMG ;****** -- RESERVED FOR CUSTOMER
EXP .ICIMG ;.IOIMG -- IMAGE 36-BIT BYTES
EXP .ICIMG ;****** -- RESERVED FOR DEC
EXP .ICIMG ;****** -- RESERVED FOR DEC
EXP .ICIMG ;.IOIBN -- IMAGE BINARY 36-BIT BYTES
EXP .ICBIN ;.IOBIN -- BINARY 36-BIT BYTES
EXP .ICIMG ;.IOIDP -- IMAGE DUMP
EXP .ICIMG ;.IODPR -- DUMP (RECORDS)
EXP .ICIMG ;.IODMP -- DUMP
;SET FILE PARAMETERS/ATTRIBUTES/ETC.
;
;CALL WITH LOOKUP BLOCK IN P1, FSB IN P2, AND FILOP. FUNCTION WORD IN P3
FLPA01: HRRZ T1,P3 ;GET JUST FILOP. FUNCTION
CAIE T1,.FORED ;IF JUST A READ
CAIN T1,.FODLT ; OR A DELETE
JRST .POPJ1## ;THEN DON'T BOTHER
MOVE P3,.FXCTL(P2) ;GET CONTROL FLAGS
MOVE P4,.FXMOD(P2) ;AND THE MOD FLAGS
MOVE T1,.IOIOM(IO) ;GET I/O MODE CONTROL
MOVX T2,RB.NSE ;THE "NON-SUPERSEDING-ENTER" FLAG
TXNE T1,IM.UNQ ;USER WANT A UNIQUE NAME ON CREATE?
IORM T2,.RBCNT(P1) ;YES
;Check for file allocation (/ESTIMATE, etc.)
FLPA03: MOVE T1,.FXEST(P2) ;GET THE /ESTIMATE WORD
CAME T1,[-1] ;NO-VALUE VALUE?
JRST FLPA05 ;NO, EXPLICIT LENGTH QUANTITY
MOVE T4,.IOIOM(IO) ;GET CDB I/O MODE CONTROL
TXNN T4,IM.CTG ;CONTIGUOUS ALLOCATION SPECIFIED?
TXNE P3,FX.CTG ;OR /CONTIGUOUS TYPED?
SKIPN .IOALW(IO) ;CONTIGUOUS - PREFER ALLOCATED QUANTITY
SKIPN T1,.IOLNW(IO) ;GOT A DATA LENGTH QUANTITY?
MOVE T1,.IOALW(IO) ;GOT AN ALLOCATED FILE SIZE?
FLPA05: ADDI T1,177 ;ROUND UP AND
LSH T1,-7 ;TRUNCATE TO NUMBER OF 128(10) WORD BLOCKS
SETZ T2, ;T1 GOES TO .RBEST, T2 GOES TO .RBALC
TXNN T4,IM.CTG ;CONTIGUOUS ALLOCATION SPECIFIED?
TXNE P3,FX.CTG ;OR /CONTIGUOUS TYPED?
EXCH T1,T2 ;YES NON-ZERO TO .RBALC THEN
MOVEM T1,.RBEST(P1) ;SET ESTIMATED ALLOCATION IN BLOCKS
MOVEM T2,.RBALC(P1) ;SET CONTIGUOUS ALLOCATION IN BLOCKS
;NOW CHECK DATE/TIME ATTRIBUTES
FLPA10: SKIPN T1,.IOCDT(IO) ;GOT A CREATION DATE/TIME?
SKIPA T2,T1 ;NO, JUST ZERO OUT THE FIELD(S)
PUSHJ P,.CNTDT## ;SPLIT INTO DATE AND TIME
DPB T2,[POINTR .RBPRV(P1),RB.CRD] ;SET MOST OF DATE
LDB T2,[POINT 3,T2,23] ;POSITION AND
DPB T2,[POINTR .RBEXT(P1),RB.CRX] ;SET REST OF DATE
IDIVI T1,^D60*^D1000 ;CONVERT TO MINUTES
DPB T1,[POINTR .RBPRV(P1),RB.CRT] ;SET CREATION TIME
SKIPE T1,.IOADT(IO) ;GOT AN ACCESS DATE/TIME?
PUSHJ P,.CNTDT## ;SPLIT INTO DATE AND TIME
DPB T1,[POINTR .RBEXT(P1),RB.ACD] ;SET ACCESS DATE
MOVE T1,.IOEDT(IO) ;GOT A EXPIRATION DATE/TIME?
MOVEM T1,.RBDED(P1) ;SET IT TOO
MOVE T1,.IOBDT(IO) ;GOT A BACKUP DATE/TIME?
MOVEM T1,.RBIDT(P1) ;YES, SET IT TOO
MOVE T1,.IOPDT(IO) ;GOT A PHYSICAL MEDIA CREATION DATE/TIME?
MOVEM T1,.RBTIM(P1) ;YES, SET IT TOO (ON G.P.'S)
;Check for file protection
FLPA20: LDB T1,[POINTR .FXMOM(P2),FX.PRO] ;/PROTECTION MASK
JUMPE T1,FLPA22 ;NO /PROTECTION:NNN IF MASK IS BLANK
LDB T1,[POINTR P4,FX.PRO] ;/PROTECTION:NNN VALUE
CAIA ;SET PROTECTION CODE FROM /PROTECTION SWITCH
FLPA22: MOVE T1,.IOPRT(IO) ;IS PROTECTION SET?
DPB T1,[POINTR .RBPRV(P1),RB.PRV] ;YES TOPS-10 LEVEL D FILE PROT
;See if account string stuff specified
FLPA25: MOVSI T2,.IOACT(IO) ;ADDRESS OF "ON-BEHALF-OF" ACCOUNT STRING
HRRI T2,.RBACT(P1) ;WHERE IT BELONGS IN THE FILE BLOCK
SKIPE .IOACT(IO) ;IS THERE AN "ON-BEHALF-OF" ACCOUNT STRING?
BLT T2,.RBAC8(P1) ;YES, COPY IT INTO THE FILE BLOCK
;Fake up "spooling" name from QUEUE JOB NAME if set (for FAL's benefit)
FLPA30: SKIPE T1,.IOQ6J(IO) ;GOT A QUEUE JOB NAME?
MOVEM T1,.RBSPL(P1) ;YES, SET FILE SPOOLING NAME THEN
;ALL DONE
JRST .POPJ1## ;RETURN SUCCESSFULLY
;LOOP BEATING ON FILENAME TO TRY TO CREATE A UNIQUE NAME
FLPUQ1: MOVE T1,.I1LKP+.RBNAM(IO) ;GET FILE NAME
SETZ T3, ;CLEAR OUT NUMERIC ACCUMULATOR
FLPUQ2: LSHC T1,-6 ;EXTRACT LOW-ORDER CHARACTER
LSH T2,-36 ;AND RIGHT-JUSTIFY IT
CAIL T2,'0' ;IS IT A DIGIT?
CAILE T2,'9' ; . . .
JRST FLPUQ9 ;NO - CAN'T CREATE UNIQUE NAME THEN
ADDI T2,1 ;INCREMENT THE POOR THING
CAIG T2,'9' ;STILL A DIGIT?
JRST FLPUQ6 ;YUP, GOT A NEW NUMBER THEN
MOVEI T2,'0' ;NOPE, OVERFLEW
LSHC T2,-6 ;SO ACCUMULATE THIS DIGIT AND
JRST FLPUQ2 ;AND PROPAGATE THE "CARRY" ANOTHER DECADE
FLPUQ6: LSHC T2,36 ;LEFT-JUSTIFY AND
LSHC T1,6 ; SLIDE THE NUMBER
JUMPN T2,.-1 ; BACK INTO THE NAME
MOVEM T1,.I1LKP+.RBNAM(IO) ;AND PUT THE NAME BACK INTO THE FILE
JRST .POPJ1## ;SUCCESSFUL RETURN TO TRY AGAIN
FLPUQ9: MOVEI M0,$EFDIF ;"DIRECTORY IS FULL" (WELL, IT IS, SORTA)
POPJ P, ;AND PROPAGATE ERROR BACK TO USER
;SET UP I/O BUFFERS IF REQUESTED
FILBF: PUSHJ P,.SAVE4## ;PRESERVE THE P'S
FILBF1: MOVE P1,.IOCCF(IO) ;GET FRESH CHANNEL CONTROL FLAGS
TXNE P1,IO.INP ;DOING INPUT?
TXNE P1,IO.IBA ;YES, INPUT BUFFERS ALLOCATED?
JRST FILBF5 ;NO INPUT OR BUFFERS ALREADY ALLOCATED
PUSHJ P,FILBI1 ;ALLOCATE AND INITIALIZE INPUT BUFFERS
POPJ P, ;BUFFER ALLOCATION FAILED
FILBF5: TXNE P1,IO.OUT ;DOING OUTPUT?
TXNE P1,IO.OBA ;YES, OUTPUT BUFFERS ALLOCATED?
JRST .POPJ1## ;NO OUTPUT OR BUFFERS ALREADY ALLOCATED
PUSHJ P,FILBO1 ;ALLOCATE AND INITIALIZE OUTPUT BUFFERS
POPJ P, ;BUFFER ALLOCATION FAILED
JRST .POPJ1## ;BUFFERS ALLOCATED
FILBI1::HRLZ T2,.IOBLC(IO) ;GET NUMBER
HRR T2,.IOBLW(IO) ; AND SIZE OF BUFFERS
MOVEI T4,.IOIBH(IO) ;AND ADDRESS OF INPUT RING HEADER
PUSHJ P,IOBFA0 ;ALLOCATE AND INITIALIZE BUFFER RING
PJRST .M0IOZ## ;FAILED, KILL CHANNEL
DMOVEM T2,.IOIAC(IO) ;SAVE FOR LATER DEALLOCATION
MOVX P1,IO.IBA ;THE INPUT-BUFFERS-ALLOCATED BIT
IORB P1,.IOCCF(IO) ;SET IN THE CDB
JRST .POPJ1## ;SUCCESSFUL RETURN
FILBO1::HRLZ T2,.IOBLC(IO) ;GET NUMBER
HRR T2,.IOBLW(IO) ; AND SIZE OF BUFFERS
MOVEI T4,.IOOBH(IO) ;AND ADDRESS OF OUTPUT RING HEADER
PUSHJ P,IOBFA0 ;ALLOCATE AND INITIALIZE BUFFER RING
PJRST .M0IOZ## ;FAILED, KILL CHANNEL
DMOVEM T2,.IOOAC(IO) ;SAVE FOR LATER DEALLOCATION
MOVX P1,IO.OBA ;THE OUTPUT-BUFFERS-ALLOCATED BIT
IORB P1,.IOCCF(IO) ;SET IN THE CDB
JRST .POPJ1## ;RETURN
;SETUP FILE/DEVICE CHARACTERISTICS
FILCH: SETZ T1, ;NO FLAGS AS YET
MOVE T2,.I1DCH(IO) ;GET DEVCHR WORD
TXC T2,DV.DSK!DV.CDR;IS BOTH A DISK AND A CARD READER?
TXCN T2,DV.DSK!DV.CDR; (ONLY SET IF NUL:)
TXO T1,IC.NUL ;YES, FLAG DEVICE IS NUL:
TXNE T2,DV.DSK ;DISK?
TXO T1,IC.FOD!IC.MDI!IC.IDV!IC.ODV!IC.RAD
TXNE T2,DV.DTA ;DECTAPE?
TXO T1,IC.FOD!IC.SDI!IC.IDV!IC.ODV
TXNE T2,DV.MTA ;MAGTAPE?
TXO T1,IC.FOD!IC.SQD!IC.IDV!IC.ODV
TXNE T2,DV.TTY ;TERMINAL?
TXO T1,IC.TRM!IC.CCL!IC.IDV!IC.ODV
TXNE T2,DV.LPT ;LINEPRINTER?
TXO T1,IC.CCL!IC.ODV
TXNE T2,DV.IN ;CAN DO INPUT?
TXO T1,IC.IDV ;YES
TXNE T2,DV.OUT ;CAN DO OUTPUT?
TXO T1,IC.ODV ;YES
TXNE T2,DV.AVL ;IS DEVICE AVAILABLE?
TXO T1,IC.AVL ;YES
TXNE T2,DV.DIR ;IS DEVICE A DIRECTORY DEVICE?
TXNE T1,IC.SDI!IC.MDI; OTHER THAN DISK OR DECTAPE?
CAIA ;NO
TXO T1,IC.SDI ;ASSUME "SINGLE-DIRECTORY"
MOVE T2,.I1DTY(IO) ;GET DEVTYP WORD
TXNE T2,TY.GEN ;WAS DEVICE SPECIFICATION GENERIC?
TXO T1,IC.GDV ;YES
TXNE T2,TY.SPL ;IS DEVICE "SPOOLED"
TXO T1,IC.SPL ;YES
;*** MOVE T2,.I1LKP+.RBSTS(IO) ;GET FILE STATUS FLAGS
;*** TXNE T2,RP.DIR ;DIRECTORY FILE?
;*** TXO T1,IC.DRF ;YES
MOVEM T1,.IODCH(IO) ;SET DEVICE/FILE CHARACTERISTICS
JRST .POPJ1## ;SUCCESSFUL RETURN (BY DEFINITION)
;SETUP ASCII NAME INFORMATION
FILRA: PUSHJ P,.SAVE4## ;SAVE THE P ACS
XMOVEI T1,FILOTO ;OUR STRING STUFFER
PUSHJ P,.XTYPO## ;SET OUR TYPE-OUT ADDRESS
;GENERATE NAME COMPONETS -- NODE NAME
FILRA3: MOVE T2,[POINT 7,.IOSND(IO)] ;HOW TO STUFF THE STRING
MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
XMOVEI T2,.IOSND(IO) ;ADDRESS OF RESULTANT STRING
SKIPN T1,.I1NOD(IO) ;GET FILE NODE NAME
SETZ T2, ;OOPS - NO NODE NAME
MOVEM T2,.IOFND(IO) ;SET POINTER FOR NODE NAME
PUSHJ P,.TSIXN## ;TYPE NODE NAME
PUSHJ P,FILOTZ ;TERMINATE THE STRING
;GENERATE NAME COMPONETS -- DEVICE NAME
FILRA4: MOVE T2,[POINT 7,.IOSDV(IO)] ;HOW TO STUFF THE STRING
MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
XMOVEI T2,.IOSDV(IO) ;ADDRESS OF RESULTANT STRING
SKIPN T1,.I1DEV(IO) ;GET DEVICE NAME
SKIPE T1,.I1FLP+.FODEV(IO) ;NONE, TRY THE FILOP. BLOCK
CAIA ;GOT A DEVICE NAME
SETZ T2, ;OOPS - NO DEVICE NAME
MOVEM T2,.IOFDV(IO) ;SET POINTER FOR DEVICE NAME
PUSHJ P,.TSIXN## ;TYPE DEVICE NAME
PUSHJ P,FILOTZ ;TERMINATE THE STRING
;GENERATE NAME COMPONETS -- DIRECTORY NAME
FILRA5: MOVE T2,[POINT 7,.IOSDR(IO)] ;HOW TO STUFF THE STRING
MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
XMOVEI T2,.IOSDR(IO) ;ADDRESS OF RESULTANT STRING
XMOVEI T1,.I1LKP+.RBPPN(IO) ;GET DIRECTORY NAME/POINTER
SKIPN (T1) ;GOT A DIRECTORY/POINTER?
SETZ T2, ;OOPS - NO DIRECTORY NAME
MOVEM T2,.IOFDR(IO) ;SET POINTER FOR DIRECTORY NAME
PUSHJ P,.TDIRB## ;TYPE DIRECTORY NAME
PUSHJ P,FILOTZ ;TERMINATE THE STRING
MOVE T1,[POINT 7,.IOSDR(IO)] ;BYTE POINTER TO DIRECTORY STRING
MOVE T2,T1 ;COPY
IBP T1 ;SKIP THE LEADING "[" FROM .TDIRB
CAIA ;ENTER LOOP
IDPB M0,T2 ;STORE IT
ILDB M0,T1 ;DIRECTORY CHARACTER
JUMPN M0,.-2 ;LOOP FOR WHOLE STRING
DPB M0,T2 ;KRUMP ON TRAILING "]" FROM .TDIRB
;GENERATE NAME COMPONETS -- FILE NAME
FILRA6: MOVE T2,[POINT 7,.IOSNM(IO)] ;HOW TO STUFF THE STRING
MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
XMOVEI T2,.IOSNM(IO) ;ADDRESS OF RESULTANT STRING
SKIPN T1,.I1LKP+.RBNAM(IO) ;GET FILE NAME
SETZ T2, ;OOPS - BLANK NAME
MOVEM T2,.IOFNM(IO) ;SET POINTER FOR FILE NAME
PUSHJ P,.TSIXN## ;TYPE FILE NAME
PUSHJ P,FILOTZ ;TERMINATE THE STRING
;GENERATE NAME COMPONETS -- FILE TYPE OR EXTENSION
FILRA7: MOVE T2,[POINT 7,.IOSEX(IO)] ;HOW TO STUFF THE STRING
MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
XMOVEI T2,.IOSEX(IO) ;ADDRESS OF RESULTANT STRING
HLLZ T1,.I1LKP+.RBEXT(IO) ;GET FILE TYPE
CAIN T1,0 ;ANYTHING THERE?
SETZ T2, ;OOPS - NO FILE TYPE
MOVEM T2,.IOFEX(IO) ;SET POINTER FOR FILE TYPE (EXTENSION)
PUSHJ P,.TSIXN## ;TYPE FILE TYPE
PUSHJ P,FILOTZ ;TERMINATE THE STRING
;GENERATE NAME COMPONETS -- FILE GENERATION
FILRA8: MOVE T2,[POINT 7,.IOSGN(IO)] ;HOW TO STUFF THE STRING
MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
XMOVEI T2,.IOSGN(IO) ;ADDRESS OF RESULTANT STRING
SKIPN T1,.I1GEN(IO) ;IS THERE A GENERATION NUMBER?
SETZ T2, ;OOPS - NO GENERATION
MOVEM T2,.IOFGN(IO) ;SET POINTER TO GENERATION STRING
PUSHJ P,.TDECW## ;LIST DECIMAL GENERATION
PUSHJ P,FILOTZ ;TERMINATE THE STRING
;*** MOVE T2,[POINT 7,.IOSOW(IO)] ;HOW TO STUFF THE STRING
;*** MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
;*** XMOVEI T2,.IOSOW(IO) ;ADDRESS OF RESULTANT STRING
;*** MOVEM T2,.IOFOW(IO) ;SET POINTER FOR FILE OWNER
;*** MOVE T1,.I1LKP+.RBPPN(IO) ;GET DIRECTORY NAME/POINTER
;*** TLNN T1,-1 ;PPN OR ADDRESS OF PATH BLOCK?
;*** MOVE T1,.PTPPN(T1) ;PATH BLOCK, GET PPN
;***;*** BUG: BOTH ROUTINES WILL ENCLOSE THE "OWNER" WITH "[]"
;*** JUMPLE T1,[PUSHJ P,.TSIXN## ;TYPE OUT NAME FORMAT PPN
;*** JRST .+2] ;CONTINUE
;*** PUSHJ P,.TPPNW## ;TYPE OUT PPN FORMAT
;*** PUSHJ P,FILOTZ ;TERMINATE THE STRING
;*** MOVE T2,[POINT 7,.IOSAU(IO)] ;HOW TO STUFF THE STRING
;*** MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
;*** XMOVEI T2,.IOSAU(IO) ;ADDRESS OF RESULTANT STRING
;*** MOVEM T2,.IOFAU(IO) ;SET POINTER FOR FILE AUTHOR
;*** MOVE T1,.I1LKP+.RBAUT(IO) ;GET FILE AUTHOR
;***;*** BUG: BOTH ROUTINES WILL ENCLOSE THE "OWNER" WITH "[]"
;*** JUMPLE T1,[PUSHJ P,.TSIXN## ;TYPE OUT NAME FORMAT PPN
;*** JRST .+2] ;CONTINUE
;*** PUSHJ P,.TPPNW## ;TYPE OUT PPN FORMAT
;*** PUSHJ P,FILOTZ ;TERMINATE THE STRING
;ALL DONE
JRST .POPJ1## ;RETURN
;SETUP TERTIARY ASCII NAME INFORMATION (AS FOR RENAME)
FILTA: PUSHJ P,.SAVE4## ;SAVE THE P ACS
XMOVEI T1,FILOTO ;OUR STRING STUFFER
PUSHJ P,.XTYPO## ;SET OUR TYPE-OUT ADDRESS
;GENERATE NAME COMPONETS -- NODE NAME
FILTA3: MOVE T2,[POINT 7,.IOS3D(IO)] ;HOW TO STUFF THE STRING
MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
XMOVEI T2,.IOS3D(IO) ;ADDRESS OF RESULTANT STRING
SKIPN T1,.I1NOD(IO) ;GET FILE NODE NAME
SETZ T2, ;OOPS - NO NODE NAME
MOVEM T2,.IOF3D(IO) ;SET POINTER FOR NODE NAME
PUSHJ P,.TSIXN## ;TYPE NODE NAME
PUSHJ P,FILOTZ ;TERMINATE THE STRING
;GENERATE NAME COMPONETS -- DEVICE NAME
FILTA4: MOVE T2,[POINT 7,.IOS3V(IO)] ;HOW TO STUFF THE STRING
MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
XMOVEI T2,.IOS3V(IO) ;ADDRESS OF RESULTANT STRING
SKIPN T1,.I1FL3+.FODEV(IO) ;GET THE DEVICE NAME
SETZ T2, ;OOPS - NO DEVICE NAME
MOVEM T2,.IOF3V(IO) ;SET POINTER FOR DEVICE NAME
PUSHJ P,.TSIXN## ;TYPE DEVICE NAME
PUSHJ P,FILOTZ ;TERMINATE THE STRING
;GENERATE NAME COMPONETS -- DIRECTORY NAME
FILTA5: MOVE T2,[POINT 7,.IOS3R(IO)] ;HOW TO STUFF THE STRING
MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
XMOVEI T2,.IOS3R(IO) ;ADDRESS OF RESULTANT STRING
XMOVEI T1,.I1LK3+.RBPPN(IO) ;GET DIRECTORY NAME/POINTER
SKIPN (T1) ;GOT A DIRECTORY/POINTER?
SETZ T2, ;OOPS - NO DIRECTORY NAME
MOVEM T2,.IOF3R(IO) ;SET POINTER FOR DIRECTORY NAME
PUSHJ P,.TDIRB## ;TYPE DIRECTORY NAME
PUSHJ P,FILOTZ ;TERMINATE THE STRING
MOVE T1,[POINT 7,.IOS3R(IO)] ;BYTE POINTER TO DIRECTORY STRING
MOVE T2,T1 ;COPY
IBP T1 ;SKIP THE LEADING "[" FROM .TDIRB
CAIA ;ENTER LOOP
IDPB M0,T2 ;STORE IT
ILDB M0,T1 ;DIRECTORY CHARACTER
JUMPN M0,.-2 ;LOOP FOR WHOLE STRING
DPB M0,T2 ;KRUMP ON TRAILING "]" FROM .TDIRB
;GENERATE NAME COMPONETS -- FILE NAME
FILTA6: MOVE T2,[POINT 7,.IOS3M(IO)] ;HOW TO STUFF THE STRING
MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
XMOVEI T2,.IOS3M(IO) ;ADDRESS OF RESULTANT STRING
SKIPN T1,.I1LK3+.RBNAM(IO) ;GET FILE NAME
SETZ T2, ;OOPS - BLANK NAME
MOVEM T2,.IOF3M(IO) ;SET POINTER FOR FILE NAME
PUSHJ P,.TSIXN## ;TYPE FILE NAME
PUSHJ P,FILOTZ ;TERMINATE THE STRING
;GENERATE NAME COMPONETS -- FILE TYPE OR EXTENSION
FILTA7: MOVE T2,[POINT 7,.IOS3X(IO)] ;HOW TO STUFF THE STRING
MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
XMOVEI T2,.IOS3X(IO) ;ADDRESS OF RESULTANT STRING
HLLZ T1,.I1LK3+.RBEXT(IO) ;GET FILE TYPE
CAIN T1,0 ;ANYTHING THERE?
SETZ T2, ;OOPS - NO FILE TYPE
MOVEM T2,.IOF3X(IO) ;SET POINTER FOR FILE TYPE (EXTENSION)
PUSHJ P,.TSIXN## ;TYPE FILE TYPE
PUSHJ P,FILOTZ ;TERMINATE THE STRING
;GENERATE NAME COMPONETS -- FILE GENERATION
FILTA8: MOVE T2,[POINT 7,.IOS3N(IO)] ;HOW TO STUFF THE STRING
MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
XMOVEI T2,.IOS3N(IO) ;ADDRESS OF RESULTANT STRING
SKIPN T1,.I1GE3(IO) ;IS THERE A GENERATION NUMBER?
SETZ T2, ;OOPS - NO GENERATION
MOVEM T2,.IOF3N(IO) ;SET POINTER TO GENERATION STRING
PUSHJ P,.TDECW## ;LIST DECIMAL GENERATION
PUSHJ P,FILOTZ ;TERMINATE THE STRING
;*** MOVE T2,[POINT 7,.IOS3W(IO)] ;HOW TO STUFF THE STRING
;*** MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
;*** XMOVEI T2,.IOS3W(IO) ;ADDRESS OF RESULTANT STRING
;*** MOVEM T2,.IOF3W(IO) ;SET POINTER FOR FILE OWNER
;*** MOVE T1,.I1LK3+.RBPPN(IO) ;GET DIRECTORY NAME/POINTER
;*** TLNN T1,-1 ;PPN OR ADDRESS OF PATH BLOCK?
;*** MOVE T1,.PTPPN(T1) ;PATH BLOCK, GET PPN
;***;*** BUG: BOTH ROUTINES WILL ENCLOSE THE "OWNER" WITH "[]"
;*** JUMPLE T1,[PUSHJ P,.TSIXN## ;TYPE OUT NAME FORMAT PPN
;*** JRST .+2] ;CONTINUE
;*** PUSHJ P,.TPPNW## ;TYPE OUT PPN FORMAT
;*** PUSHJ P,FILOTZ ;TERMINATE THE STRING
;*** MOVE T2,[POINT 7,.IOS3U(IO)] ;HOW TO STUFF THE STRING
;*** MOVEM T2,.IOXTO(IO) ;SET FOR FILOTO TO FIND
;*** XMOVEI T2,.IOS3U(IO) ;ADDRESS OF RESULTANT STRING
;*** MOVEM T2,.IOF3U(IO) ;SET POINTER FOR FILE AUTHOR
;*** MOVE T1,.I1LK3+.RBAUT(IO) ;GET FILE AUTHOR
;***;*** BUG: BOTH ROUTINES WILL ENCLOSE THE "OWNER" WITH "[]"
;*** JUMPLE T1,[PUSHJ P,.TSIXN## ;TYPE OUT NAME FORMAT PPN
;*** JRST .+2] ;CONTINUE
;*** PUSHJ P,.TPPNW## ;TYPE OUT PPN FORMAT
;*** PUSHJ P,FILOTZ ;TERMINATE THE STRING
;ALL DONE
JRST .POPJ1## ;RETURN
;FILRA/FILTA HELPER FOR TEXT OUTPUT
FILOTO: IDPB T1,.IOXTO(IO) ;STASH CHARACTER AWAY IN STRING
POPJ P, ;AND THAT'S IT
FILOTZ: MOVE T2,.IOXTO(IO) ;FETCH COPY OF BYTE STUFFER
SETZ T1, ;A NULL TO TERMINATE THE STRING
IDPB T1,T2 ;CLEAR END OF STRING
TLNE T2,760000 ;TO WORD BOUNDRY?
JRST .-2 ;NOT YET
POPJ P, ;RETURN READY FOR MORE FILOTO
;RETURN FILE PARAMETERS, IF NEEDED
FILPA: MOVE T1,.I1LKP+.RBSIZ(IO) ;FILE LENGTH (-10 WORDS)
MOVEM T1,.IOLNW(IO) ;SET IN THE CDB
MOVEI T2,^D36 ;BITS PER WORD
IDIV T2,.IOFSZ(IO) ;LOGICAL DATA BYTES PER WORD
IMULI T1,(T2) ;DATA BYTES WRITTEN IN FILE
MOVEM T1,.IOLNB(IO) ;SET IN THE CDB
MOVE T1,.I1LKP+.RBALC(IO) ;FILE ALLOCATION (-10 BLOCKS)
IMULI T1,^D128 ;FILE ALLOCATION (-10 WORDS)
MOVEM T1,.IOALW(IO) ;SET IN THE CDB
IMULI T1,(T2) ;FILE ALLOCATION IN BYTES
MOVEM T1,.IOALB(IO) ;SET IN THE CDB
DMOVE T1,.IOLNW(IO) ;WRITTEN LENGTH (WORDS, BYTES)
DMOVEM T1,.IOLSW(IO) ;SET LAST WRITTEN WORD, BYTE
;SETUP DATE/TIME WORDS
LDB T1,[POINTR .I1LKP+.RBPRV(IO),RB.CRT] ;CREATION TIME
IMULI T1,^D60*^D1000 ;(.CNVDT WANTS MILLISECONDS)
LDB T2,[POINTR .I1LKP+.RBPRV(IO),RB.CRD] ;CREATION DATE
LDB T4,[POINTR .I1LKP+.RBEXT(IO),RB.CRX] ;CREATION DATE EXTENSION
DPB T4,[POINT 3,T2,23] ;REST OF CREATION DATE
PUSHJ P,.CNVDT## ;CONVERT TO UNIVERSAL DATE/TIME
MOVEM T1,.IOCDT(IO) ;SET DATA CREATION DATE/TIME
SETZ T1, ;NO ACCESS TIME KNOWN
LDB T2,[POINTR .I1LKP+.RBEXT(IO),RB.ACD] ;ACCESS DATE (NO TIME)
PUSHJ P,.CNVDT## ;CONVERT TO UNIVERSAL DATE/TIME
MOVEM T1,.IOADT(IO) ;SET IN THE CDB
MOVE T1,.I1LKP+.RBTIM(IO) ;INTERNAL (PHYSICAL) CREATION DATE/TIME
MOVEM T1,.IOPDT(IO) ;SET IN THE CDB
MOVE T1,.I1LKP+.RBDED(IO) ;FILE EXPIRATION DATE/TIME
TLNN T1,700000 ;*** LOOK REASONABLE?
SETZ T1, ;*** NO (WATCH OUT FOR BOGUS VALUES)
MOVEM T1,.IOEDT(IO) ;SET EXPIRATION DATE/TIME IN THE CDB
MOVE T1,.I1LKP+.RBIDT(IO) ;INCREMENTAL BACKUP DATE/TIME
TLNN T1,700000 ;*** LOOK REASONABLE?
SETZ T1, ;*** NO (WATCH OUT FOR BOGUS VALUES)
MOVEM T1,.IOBDT(IO) ;SET BACKUP DATE/TIME IN THE CDB
SETZM .IOUDT(IO) ;WE DON'T KNOW ABOUT UPDATE TIME(S)
;NOW THE PROTECTION (EASY CASE)
LDB T1,[POINTR .I1LKP+.RBPRV(IO),RB.PRV] ;GET THE PROTECTION
HRROM T1,.IOPRT(IO) ;SET FILE PROTECTION VALUE
;ALL DONE
JRST .POPJ1## ;SUCCESSFUL RETURN
SUBTTL File-level remote support routines
;DPINI -- INITIALIZE DAP COMMUNICATIONS LINK
;CALL IS:
;
; MOVX T1,<CDB>
; MOVX T2,<NOD>
; PUSHJ P,DPINI
; error return
; normal return
;
;Where <NOD> is the 6-bit format node name with whom file access is desired.
;
;On error return M0 contains a reason why communications could not be
;established.
;
;On normal return, a communications channel has been established with a
;FAL process on the specified node, and configuration messages have been
;exchanged. The link is ready for normal DAP protocol interchange.
;
;Uses T1 - T4.
ENTRY .DPINI
INTERN DPINI0,DPINI1
.DPINI: PUSHJ P,.SACIO## ;SETUP I/O CDB INDEX
DPINI0: PUSHJ P,.SAVE4## ;SAVE THE P'S HERE
DPINI1: PUSHJ P,TSAV14## ;SAVE THE NODE NAME INPUT
;ENSURE THAT WE HAVE A CLEAN "CHANNEL"
MOVE T2,.IOCCF(IO) ;GET CONTROL FLAGS
TXNN T2,IO.OPN ;A FILE KNOWN TO BE OPEN?
SKIPE .IOCHN(IO) ;OR A CHANNEL LEFT LYING AROUND?
JRST [PUSHJ P,IOABO1 ;STOMP ON THE FILE
JFCL ;HMMM
JRST .+1] ;CONTINUE
DPINI2: SKIPN .IONCH(IO) ;HAVE A NETWORK CHANNEL?
JRST DPINI4 ;NO, ALL SET TO OPEN NEW NETWORK LINK
SETZ T2,T3 ;NO OPTIONAL DISCONNECT DATA
PUSHJ P,NTZAP1## ;YES, STOMP ON IT TOO
JFCL ;HMMM
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;SETUP SOURCE AND DESTINATION PROCESS DESCRIPTOR BLOCKS
DPINI4: SETZM .IONSF(IO) ;CLAIM NO SPECIAL SOURCE FORMAT//OBJECT
SETZM .IONSP(IO) ;NOR PPN
SETZM .IONSN(IO) ;NOR NAME
MOVX T3,<0,,345> ;*** GENERIC INNOCUOUS UNPRIVILEGED JUNK
MOVEM T3,.IONSF(IO) ;*** VAX WANTS THIS NON-ZERO,
;*** BUT OTHERWISE IGNORES IT!
REPEAT 0,< ;*** WHEN NO LONGER WORRIED ABOUT THE DCP
MOVX T3,<2,,0> ;FORMAT 2 (= [P,PN]NAME)
MOVEM T3,.IONSF(IO) ;TELL "FAL" WE ARE IDENTIFYING OURSELF
MOVE T3,.MYPPN## ;MY PPN
MOVEM T3,.IONSP(IO) ;SET IN SOURCE PPN WORD
MOVE P3,[^D12,,.IONSN] ;<N8P> "BYTE POINTER" FOR N6XO8
DMOVE T2,.MYNAM## ;FETCH USER NAME
PUSHJ P,.N6XO8## ;CONVERT SIXBIT (2-WORDS) TO EIGHTBIT
POPJ P, ;DIED
HRLI P3,4 ;MAXIMUM STRING BLOCK LENGTH
MOVSM P3,.IONSN(IO) ;SET NAME BLOCK
> ;END REPEAT 0
;AND NOW THE DESTINATION PROCESS DESCRIPTOR BLOCK
NIPOBJ:!MOVX T3,<0,,21> ;GENERIC DAP FAL SPECIFICATION
MOVEM T3,.IONDF(IO) ;SELECT DESTINATION TASK
SETZM .IONDP(IO) ;NO SPECIAL PPN
SETZM .IONDN(IO) ;NOR NAME
;SET USER FOR "ON BEHALF OF" REMOTE STUFF
SKIPN P1,.IOFSC(IO) ;ADDRESS OF FILE SPEC BLOCK
STOPCD <No "current" FSB in DPINI>
XMOVEI T2,.FXUID(P1) ;/USERID USERID STRING (IF ANY)
MOVE P3,[^D39,,.IONUS] ;8-BIT FORMAT POINTER
PUSHJ P,.N7TO8## ;CONVERT FROM ASCIZ TO 8-BIT
STOPCD </USERID string too long in DPINI>
HRLZM P3,.IONUS(IO) ;SET BYTE COUNT
XMOVEI T2,.FXUAC(P1) ;/USERID ACCOUNT STRING (IF ANY)
MOVE P3,[^D39,,.IONAC] ;8-BIT FORMAT POINTER
PUSHJ P,.N7TO8## ;CONVERT FROM ASCIZ TO 8-BIT
STOPCD </UACCOUNT string too long in DPINI>
HRLZM P3,.IONAC(IO) ;SET BYTE COUNT
XMOVEI T2,.FXUPW(P1) ;/USERID PASSWORD STRING (IF ANY)
MOVE P3,[^D39,,.IONPW] ;8-BIT FORMAT POINTER
PUSHJ P,.N7TO8## ;CONVERT FROM ASCIZ TO 8-BIT
STOPCD </UPASSWORD string too long in DPINI>
HRLZM P3,.IONPW(IO) ;SET BYTE COUNT
;EXPLICIT USERID STUFF SET, CALL "NODE DEFAULTER" FOR LAST DITCH ATTEMPT
MOVE T1,IO ;SET CDB ADDRESS IN T1 FOR GLOBAL CALL
PUSHJ P,.DFLND## ;SEE IF ANYONE WANTS TO CHANGE/ADD ETC.
POPJ P, ;??? OH WELL, PASS THE EXCEPTION/ERROR ON
;TRY TO CONNECT TO A REMOTE FAL
MOVEI T4,5 ;*** THE RETRY COUNTER
MOVEM T4,-T4(P) ;*** SAVE IT SOMEWHERE
DPINI6: MOVE T2,-T2(P) ;RESTORE THE NODE NAME
PUSHJ P,NTNIA1## ;ISSUE CONNECT REQUEST
JRST DPINIE ;FAILED - CHECK IT OUT
;WAIT FOR COMPLETION
PUSHJ P,NTNCW1## ;WAIT FOR CONNECT CONFIRM
JRST DPINIE ;FAILED - CHECK IT OUT
;NETWORK LINK ESTABLISHED AND ACTIVE, INITIALIZE BUFFERS ETC
PUSHJ P,NTINI1## ;INITIALIZE NETWORK BUFFERS, ETC.
POPJ P, ;SIGH
;EXCHANGE CONFIGURATION MESSAGES
PJRST DPICM1 ;SETUP AND EXCHANGE CONFIG MESSAGES
;ERROR ESTABLISHING LINK TO REMOTE
DPINIE: CAIE M0,$EFURO ;UNKNOWN OBJECT?
CAIN M0,$EFOTB ;OBJECT BUSY?
JRST DPINIW ;YES, WAIT AND TRY AGAIN
POPJ P, ;NO OTHERS, DIE
DPINIW: SOSG -T4(P) ;READY TO GIVE UP YET?
POPJ P, ;YES, CONNECT INIT FAILED
MOVEI T1,1 ;NO, PERSIST A FEW TIMES
SLEEP T1, ;GIVE THE OTHER SIDE A CHANCE
JRST DPINI6 ;TO RECYCLE ITSELF, AND TRY AGAIN
;DPICM - SETUP AND EXCHANGE CONFIGURATION MESSAGES
;CALL IS:
;
; MOVX T1,<CDB>
; PUSHJ P,DPICM
; error return
; normal return
;
;Where <CDB> is the address of the networked I/O "channel" data block.
;
;DPICM first sets up a configuration message reflecting this library's
;capabilities, then calls DPXCM to actually exchange configuration messages
;with the remote FAL process.
;
;On error return communications could not successfully be established with
;the remote FAL process, an error code will be returned in M0.
;
;On normal return a communications channel has been established with a
;remote FAL process, and configuration messages have been exchanged. The
;link is ready for DAP-level traffic.
;
;Uses T1 - T4.
ENTRY .DPICM
INTERN DPICM0, DPICM1
.DPICM: PUSHJ P,.SACIO## ;SETUP CDB INDEX
DPICM0: PUSHJ P,.SAVE4## ;SAVE THE P'S
DPICM1: MOVDII T3,MSZ,0 ;NO EXPLICIT DAP MESSAGE SIZE LIMIT
;**************************************************************
;
;The DAP message size value was a real trouble spot in the early NFT-10
;development period - different systems behaved quite differently with
;respect to my sending a "0" (= unlimited buffering capability) for
;the "MSZ" field. Some early VAXen, lacking a specific limit, just kept
;accumulating the data until they choked on it. At least one flavor of
;TOPS-20 sent me ^D256, but would refuse to talk to me in return if I
;sent it the same value! Empirically I have determined that ^O1040
;(enough for 512 byte-records plus DAP overhead) seemed to keep everyone
;happy.
;
;If you ever come across a system that for no apparent reason simply
;refuses to cooperate, try patching DPICM1 to set 1040 into the MSZ
;field.
;
;**************************************************************
MOVDM T3,MSZ ;SET CONFIGURATION MESSAGE SIZE FIELD
MOVDII T3,OST,$DVOT1 ;WE ARE A TOPS-10 SYSTEM
MOVDM T3,OST ;SET CONFIGURATION OPERATING SYSTEM FIELD
MOVDII T3,FST,$DVFT1 ;FILE SYSTEM IS ALSO TOPS-10
MOVDM T3,FST ;SET CONFIGURATION FILE SYSTEM FIELD
MOVDII T3,DVR,7 ;DAP MAJOR VERSION
MOVDM T3,DVR ;SET IN CDB
MOVDII T3,DVE,0 ;DAP "ECO" (OR MINOR) VERSION
MOVDM T3,DVE ;SET IN CDB
MOVDII T3,DVU,0 ;DAP "USER" OR "CUSTOMER" VERSION
MOVDM T3,DVU ;SET IN CDB
MOVDII T3,DVS,0 ;DAP "SOFTWARE" VERSION
MOVDM T3,DVS ;SET IN CDB
MOVDII T3,DVT,0 ;DAP "USER SOFTWARE" VERSION
MOVDM T3,DVT ;SET IN CDB
MOVDII T3,CNF,<SFO,SFT,APN,CMF,BLR,C25,FCK,AEA,DIR,TEA,PEA,SPO,CMS,FDE,BTC,WST,REN,WLD,CGN,NAM,DSG,CFA,CFD,CFP,CFN,N3D,CRA,CRD,CRP>
MOVDM T3,CNF ;SET CONFIGURATION CAPABILITIES FLAGS FIELD
PJRST DPXCM1 ;NOW EXCHANGE THE CONFIGURATION MESSAGES
;DPXCM - EXCHANGE DAP CONFIGURATION MESSAGES
;CALL IS:
;
; MOVX T1,<CDB>
; PUSHJ P,DPXCM
; error return
; normal return
;
;Where <CDB> is the address of the associated I/O channel data block
;which has been linked to a remote FAL process.
;
;DPXCM will first transmit a configuration message to the remote FAL
;process (the caller is responsible for correctly setting the initial
;configuration message to be sent to the remote), then receive the
;remote FAL's configuration message.
;
;On error return M0 will contain an error code indicating why the DAP
;configuration messages could not be exchanged (network died, etc.).
;
;On normal return the DAP link is ready for normal DAP-level traffic.
;
;Uses T1 - T4.
ENTRY .DPXCM
INTERN DPXCM0,DPXCM1
.DPXCM: PUSHJ P,.SACIO## ;SETUP I/O CDB INDEX
DPXCM0: PUSHJ P,.SAVE4## ;SAVE THE P'S
DPXCM1: MOVD1 T2,MSZ ;GET MAXIMUM MESSAGE SIZE WE SET
MOVEM T2,.I1DSZ(IO) ;STASH IT FOR AWHILE
MOVEI T2,$DHCFG ;MESSAGE TYPE = CONFIGURATION
PUSHJ P,XDDAP1## ;GENERATE CONFIGURATION MESSAGE
JRST [CAIN M0,$EINMP ;GOT INPUT MESSAGE PENDING?
JRST .+1 ;YES, PROCESS IT
JRST DPXCME] ;NO, NETWORK ERROR (CHECK FOR $EINLA)
; (NOTE THAT XDDAP WILL AUTOMATICALLY FLUSH
; CONFIGURATION MESSAGES).
;CLEAN UP IN CASE A RESTART OR THE LIKE
SETZM .IOBZD(IO) ;START OFF WITH A FRESH SLATE
MOVSI T1,.IOBZD(IO) ;START OF DAP TO-BE-ZEROED AREA
HRRI T1,.IOBZD+1(IO) ;BLT POINTER TO
BLT T1,.IOEZD-1(IO) ;CLEAR DAP TO-BE-CLEARED AREA
;NOW RECEIVE THE REMOTE'S INITIAL RESPONSE
PUSHJ P,RDMSG1## ;GET MESSAGE TYPE
JRST DPXCME ;NET DIED - CHECK FOR $EINLA
JSP T4,.CDISP## ;DISPATCH ON DAP MESSAGE TYPE
DPXCM3,,$DHCFG ;CONFIGURATION
DPXCM7,,$DHSTS ;STATUS (??)
0 ;THAT'S IT
STOPCD <First received DAP message not configuration>
;HERE TO READ REMOTE'S DAP CONFIGURATION MESSAGE
DPXCM3: PUSHJ P,RDDAP1## ;READ IN THE REMOTE'S CONFIGURATION MESSAGE
POPJ P, ;DUH?
MOVD1 T1,DVR ;DAP PROTOCOL VERSION
MOVD1 T2,DVE ;DAP PROTOCOL ECO LEVEL
LSH T1,^D9 ;POSITION AND
IOR T1,T2 ;CONCOCT A "VERSION" VALUE
MOVEM T1,.IODPV(IO) ;SET DAP "VERSION"
MOVX T1,IO.DAP ;WE ARE TALKING DAPESE
IORM T1,.IOCCF(IO) ;SET APPROPRIATE FLAGS IN CHANNEL CONTROL
SKIPN T1,.I1DSZ(IO) ;GET THE MAXIMA WE GENERATED
MOVEI T1,777777 ;UNLIMITED
SKIPN T2,.IDMSZ(IO) ;GET REMOTE'S MAXIMA
MOVEI T2,777777 ;UNLIMITED
CAMLE T1,T2 ;IS OUR LIMIT BIGGER THAN THE REMOTE?
MOVE T1,T2 ;YES, USE REMOTE'S MESSAGE LIMIT THEN
CAMLE T1,.IONLB(IO) ;BIGGER THAN OUR NSP SEGMENT SIZE?
MOVE T1,.IONLB(IO) ;YES, LIMIT IT TO FIT NSP BUFFER
MOVEM T1,.IONLM(IO) ;SET OUTPUT NETWORK MESSAGE-LIMITED SIZE
SUB T1,.IONLB(IO) ;GET DIFFERENCE IN MESSAGE AND BUFFER SIZE
ADDM T1,.IONOC(IO) ;ADJUST OUTPUT BYTES REMAINING
;ALL SET
JRST .POPJ1## ;CONNECTED WITH A REMOTE FAL
;HERE WHEN LINK STARTS WITH A STATUS RATHER THAN CONFIGURATION
DPXCM7: PUSHJ P,RDSTS0## ;READ AND TRANSLATE THE STATUS
JFCL ;HO HUM
MOVE P1,M0 ;PRESERVE ERROR CODE
PUSHJ P,NTZAP0## ;ABORT THE LINK
JFCL
MOVE M0,P1 ;REPOSITION ERROR CODE
POPJ P, ;PROPAGATE ERROR
;HERE ON I/O ERROR - CHECK FOR $EINLA (SORT OF A DEFERRED ERROR FROM
;TSK. - IT HAS NO WAY OF REJECTING THE (E.G.,) PPN/PASSWORD UNTIL *AFTER*
;THE LINK IS ACTUALLY CONNECTED, SO MUST LOOK FOR A IMMEDIATE "DISCONNECT"
;AT THIS STAGE - SEE NARXS IN NN.MAC)
DPXCME: CAIE M0,$EINLA ;GENERIC "LINK ABORTED" ERROR?
POPJ P, ;BACK TO CALLER
MOVE T2,.IOER2(IO) ;YES, RETRIEVE REAL ERROR HERE
MOVEI T4,[$EFURO,,$EIURO ;NO SUCH OBJECT
$EFRES,,$EIRES ;NO RESOURCES/TOO MANY CONNECTS
$EFOTB,,$EIOTB ;OBJECT BUSY
$EFLNS,,$EILNS ;NODE SHUTTING DOWN
$EFABM,,$EIABM ;ABORTED BY DIALOG
$EFUID,,$EIUID ;INVALID USERID/PASSWORD
$EFUAC,,$EIUAC ;INVALID USER ACCOUNT STRING
$EFIMG,,$EIIMG ;ERROR IN IMAGE FIELD/STRING
0] ;END OF TABLE
PUSHJ P,.CFIND## ;READILY-TRANSLATABLE ERROR?
POPJ P, ;NO, PROPAGATE $EINLA
MOVE M0,T1 ;YES, PICK TRANSLATION THEN
POPJ P, ;AND USE IT (PRETTIER MESSAGE)
;DPRNM -- PROCESS RECEIVED NAME STRING
;CALL IS:
;
; PUSHJ P,DPRNM
; error return
; normal return
;
;On error return the received resultant name string could not be parsed.
;M0 has an error code.
;
;On successful return the name string has been parsed and the appropriate
;file information fields set.
;
;Uses T1 - T4.
ENTRY .DPRNM
INTERN DPRNM0, DPRNM1
.DPRNM: PUSHJ P,.SACIO## ;SETUP I/O CDB INDEX
DPRNM0: PUSHJ P,.SAVE4## ;SAVE THE P'S
DPRNM1: MOVD1 T1,FST ;GET REMOTE FILE SYSTEM TYPE
CAIE T1,$DVF32 ;TALKING TO A VAX (RMS-32)?
CAIN T1,$DVF11 ;OR TO A RSTS/E (ALSO GETS RSX/ETC)?
CAIA ;YES
JRST DPRNM4 ;NO
;VAXII LIKE TO PREFIX THEIR RESULTANT FILE NAME STUFF WITH AN "_" CHARACTER.
;NEEDLESS TO SAY, THIS DOES NOT PLEASE SCAN! THEREFORE OVERWRITE THE "_"
;WITH A SPACE AND HOPE FOR THE BEST.
;
;I SEE RSTS/E ALSO DOES THIS. I WONDER WHY? IT SEEMS LIKE SOMEONE IS GOING
;TO AN AWFUL LOT OF TROUBLE TO MAKE THINGS COMPLICATED . . .
MOVE T1,[POINT 7,.IDNMS(IO)] ;PROTOTYPE NAME STRING BYTE POINTER
MOVEI T3," " ;INNOCUOUS ASCII CHARACTER
ILDB T2,T1 ;FIRST BYTE OF NAME STRING
CAIE T2,"_" ;IS VAX DOING ITS THING?
JRST DPRNM2 ;NO (OR AT LEAST NOT HERE)
DPB T3,T1 ;YES, UNDO IT!
ILDB T2,T1 ;SECOND (!!) BYTE OF NAME STRING
CAIN T2,"_" ;IS VAX DOING EVEN MORE OF ITS THING?
DPB T3,T1 ;YES, UNDO IT!
DPRNM2: MOVEI T3,"-" ;MORE-PALATABLE CHARACTER THAN "_"
DPRNM3: ILDB T2,T1 ;NEXT NAME CHARACTER
CAIN T2,"_" ;UNDESIRABLE CHARACTER?
DPB T3,1 ;YES, CLEAN IT UP
JUMPN T2,DPRNM3 ;CHECK THE ENTIRE STRING
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
DPRNM4: PUSHJ P,DPGAAT ;GET FILE SPEC CONTROL FLAGS IN T2
TXNN T2,FX.SGN ;DOES GENERATION GET SEMICOLON?
JRST DPRN00 ;NO
MOVD T1,NTY ;YES (E.G., RSX, VAX), GET NAME TYPE
TFNN T1,NFN ;IF A FILE NAME TYPE
TFNE T1,NFS ;OR A FILE SPEC TYPE
CAIA ;THEN KRUMP ON SEMICOLONS
JRST DPRN00 ;ELSE LEAVE THE NAME MESSAGE ALONE
;HERE FOR (E.G.) RSX/VAX FILE NAME - CONVERT ";" PRECEDING GENERATION INTO
;OUR "." FOR THE FILE SPEC PARSER.
DPRNM5: MOVE T1,[POINT 7,.IDNMS(IO)] ;POINTER TO NAME STRING
MOVEI T3,"." ;PREFERED GENERATION CHARACTER
DPRNM6: ILDB T2,T1 ;GET FIRST CHARACTER, ENTER LOOP
CAIN T2,";" ;SEMICOLON PRECEDING GENERATION?
DPB T3,T1 ;YES, CONVERT ;GENERATION TO .GENERATION
JUMPN T2,DPRNM6 ;LOOP FOR WHOLE NAME STRING
;HERE TO DISPATCH TO NAME-TYPE-SPECIFIC HANDLING
DPRN00: MOVD T1,NTY ;GET NAME TYPE FIELD
TFNE T1,NVN ;VOLUME NAME?
JRST DPRN20 ;YES
TFNE T1,NDN ;DIRECTORY NAME?
JRST DPRN30 ;YES
TFNE T1,NFN ;FILE NAME (INC EXTENSION AND GENERATION)?
JRST DPRN51 ;YES
TFNE T1,NFS ;FULL FILE SPECIFICATION?
JRST DPRN50 ;YES
STOPCD <Unknown NAME message type in DPRNM>
;HERE ON VOLUME NAME
DPRN20: PUSHJ P,DPRNN1 ;GOBBLE UP THE NAME
STOPCD <DPRNN1 failed reading device NAME message in DPRN20>
DPRN24: SKIPN T1,F.BLK##+.FXDEV ;PICK UP THE DEVICE NAME
SKIPE T1,F.BLK##+.FXNAM ;NO ":", USE UNQUALIFIED NAME INSTEAD
CAIA ;GOT A NAME, USE IT
STOPCD <Null returned device name in DPRN20>
MOVEM T1,.I1FLP+.FODEV(IO) ;SET FOR SCWLD, IOQAT, ETC.
MOVEM T1,.I1DEV(IO) ;PUT IN "REAL" DEVICE NAME FIELD
MOVEM T1,.I1PT2(IO) ;ALSO PUT IT IN RETURNED PATH BLOCK
SKIPN T1,F.BLK##+.FSDEV ;PICK UP THE DEVICE STRING
MOVE T1,F.BLK##+.FSNAM ;USE UNQUALIFIED NAME INSTEAD
XMOVEI T2,.IOSDV(IO) ;ADDRESS OF DEVICE STRING NAME BLOCK
MOVEM T2,.IOFDV(IO) ;SET POINTER TO DEVICE STRING
PUSHJ P,DPRNS1 ;AND COPY THE STRING OVER
JFCL ;JUNK
JRST .POPJ1## ;BACK FOR MORE
;DIRECTORY NAME
DPRN30: MOVE T4,[POINT 7,.IDNMS(IO)] ;POINTER TO ASCIZ STRING
ILDB T1,T4 ;GET THE FIRST CHARACTER
JUMPE T1,[SETZM F.BLK##+.FXDIR;[1001] IF NULL DIRECTORY,
SETZM F.BLK##+.FSDIR ;[1001] THEN JUST CLEAR THE
SETZM .IOFDR(IO) ;[1001] DIRECTORY FIELDS AND
JRST .POPJ1##] ;[1001] IGNORE THE NAME MESSAGE
CAIE T1,"[" ;A DIRECTORY DELIMITER?
CAIN T1,"<" ;(> MATCH ANGLE BRACKETS)
JRST DPRN33 ;YES, ALL SET
SKIPA T2,["["] ;NO, PRESET NORMAL DELIMITER
DPRN31: ILDB T1,T4 ;NEXT CHARACTER OF NAME
DPB T2,T4 ;PUT BACK ONE
SKIPE T2,T1 ;END OF STRING YET?
JRST DPRN31 ;NO
DPRN33: PUSHJ P,DPRNN1 ;NOW READ IN THE STRING
STOPCD <DPRNN1 failed reading directory NAME message in DPRN33>
DPRN34: MOVE T3,[-.FXLND,,F.BLK##+.FXDIR] ;RESULTANT DIRECTORY
MOVEI T4,.I1PT2+.PTPPN(IO) ;WHERE TO PUT IT
DPRN36: MOVE T1,(T3) ;GET NEXT DIRECTORY NAME
MOVEM T1,(T4) ;STASH IT IN PATH BLOCK
ADDI T3,1 ;FIRST HALF OF BIWORD
ADDI T4,1 ;NEXT PATH BLOCK WORD
AOBJN T3,DPRN36 ;LOOP FOR ENTIRE PATH
MOVEI T1,.I1PT2(IO) ;ADDRESS OF RESULTANT PATH BLOCK
MOVEM T1,.I1LKP+.RBPPN(IO) ;SET FOR SCWLD, IOWAT, ETC.
MOVE T1,F.BLK##+.FSDIR ;ADDRESS OF DIRECTORY STRING
XMOVEI T2,.IOSDR(IO) ;ADDRESS OF DIRECTORY STRING NAME BLOCK
MOVEM T2,.IOFDR(IO) ;SET POINTER TO DIRECTORY STRING
PUSHJ P,DPRNS1 ;AND COPY THE STRING OVER
JFCL ;JUNK
SKIPE F.BLK##+.FXDEV ;GOT A DEVICE?
JRST DPRN24 ;YES, GO SET IT UP TOO
JRST .POPJ1## ;BACK FOR MORE
;HERE FOR FULL FILE SPECIFICATION
DPRN50:
;HERE FOR FILE NAME
DPRN51: PUSHJ P,DPRNN1 ;READ IN THE FILE NAME/SPEC
STOPCD <DPRNN1 failed reading file name/spec NAME message in DPRN51>
DPRN54: SKIPE T1,F.BLK##+.FXDEV ;GET DEVICE IF ANY
JRST [MOVEM T1,.I1FLP+.FODEV(IO) ;SET FOR SCWLD, IOQAT, ETC.
MOVEM T1,.I1DEV(IO) ;PUT IN "REAL" DEVICE NAME FIELD
MOVEM T1,.I1PT2(IO) ;ALSO PUT IT IN RETURNED PATH BLOCK
JRST .+1] ;CONTINUE
MOVE T1,F.BLK##+.FXNAM ;GET FILE NAME IF ANY
MOVEM T1,.I1LKP+.RBNAM(IO) ;AND SET FOR SCWLD, IOQAT, ETC.
MOVE T1,F.BLK##+.FSNAM ;GET FILE NAME STRING, IF ANY
XMOVEI T2,.IOSNM(IO) ;ADDRESS OF NAME STRING NAME BLOCK
MOVEM T2,.IOFNM(IO) ;SET POINTER TO NAME STRING
PUSHJ P,DPRNS1 ;AND COPY THE STRING OVER
JFCL ;JUNK
MOVE T1,F.BLK##+.FXEXT ;GET FILE TYPE IF ANY
HLLZM T1,.I1LKP+.RBEXT(IO) ;AND SET FOR SCWLD, IOQAT, ETC.
MOVE T1,F.BLK##+.FSEXT ;GET FILE EXTENSION STRING
XMOVEI T2,.IOSEX(IO) ;ADDRESS OF EXTENSION STRING NAME BLOCK
MOVEM T2,.IOFEX(IO) ;SET POINTER TO EXTENSION STRING
PUSHJ P,DPRNS1 ;AND COPY THE STRING OVER
JFCL ;JUNK
MOVE T1,F.BLK##+.FXGEN ;GET FILE GENERATION IF ANY
MOVEM T1,.I1GEN(IO) ;AND SET FOR INTERESTED PARTIES
MOVE T1,F.BLK##+.FSGEN ;GET GENERATION NAME STRING
XMOVEI T2,.IOSGN(IO) ;ADDRESS OF GENERATION STRING NAME BLOCK
MOVEM T2,.IOFGN(IO) ;SET POINTER TO GENERATION STRING
PUSHJ P,DPRNS1 ;AND COPY THE STRING OVER
JFCL ;JUNK
SKIPE F.BLK##+.FXDIR ;GOT A DIRECTORY?
JRST DPRN34 ;YES, GO SET IT UP TOO
SKIPE F.BLK##+.FXDEV ;GOT A DEVICE?
JRST DPRN24 ;YES, GO SET IT UP TOO
JRST .POPJ1## ;BACK FOR MORE
;HELPER FOR DPRNM NAME PROCESSING
ENTRY .DPRNN
INTERN DPRNN0, DPRNN1
.DPRNN: PUSHJ P,.SACIO ;SET UP I/O CONTEXT
DPRNN0:
DPRNN1: PUSHJ P,.SAVE4## ;SCAN'S CH AND NM ARE OUR P3 AND P4 !!!
SETZM .IOXTO(IO) ;USE IOXTO AS COUNTER/FLAG HERE
XMOVEI T1,DPRNNI ;OUR VERY OWN INPUT TYPER
PUSHJ P,.XTYPI## ;INTERCEPT "COMMAND" INPUT
XMOVEI T1,DPRNNO ;OUR VERY OWN OUTPUT TYPER
PUSHJ P,.XTYPO## ;INTERCEPT "COMMAND" OUTPUT
MOVE T1,[POINT 7,[0]];A DUMMY STRING
MOVEM T1,.IOXTI(IO) ;SET IN CASE .CLRTI NEEDS SOMETHING
PUSHJ P,.CLRTI## ;SETUP LOWLEVEL COMMAND INPUT ROUTINES
MOVE T1,[POINT 7,.IDNMS(IO)] ;BYTE POINTER TO NAME STRING
MOVEM T1,.IOXTI(IO) ;SET FOR DPRNNI
;NOW PARSE THE NAME MESSAGE
PUSHJ P,.FILSP## ;LET SCAN DO ITS THING
JRST DPRNN7 ;ERROR - DIE
SKIPE .IOXTO(IO) ;IT BETTER NOT HAVE COMPLAINED
JRST DPRNN7 ;OOPS - SHOULDN'T HAPPEN
LDB T1,[POINTR F.BLK##+.FXMOD,FX.TRM] ;GET FILE SPEC TERMINATOR
CAIN T1,.FXTRZ ;BETTER HAVE BEEN "NORMAL" TERMINATION
JUMPL CH,.POPJ1## ;IF READ TO "EOL" THEN COMPLETED SAFELY
DPRNN7: STOPCD <Error in parsing received NAME message in DPRNN>
;THE "COMMAND" INPUT ROUTINE
DPRNNI: ILDB CH,.IOXTI(IO) ;GET NEXT CHARACTER FROM NAME STRING
JUMPN CH,.POPJ## ;RETURN IT
MOVEI CH,.CHLFD ;END OF STRING, RETURN EOL TO SCAN
POPJ P, ; . . .
;THE "COMMAND" OUTPUT ROUTINE
DPRNNO: OUTCHR T1 ;OH WELL
AOS .IOXTO(IO) ;COUNT OCCURENCES
POPJ P, ;RETURN TO SCAN
;DPRNS - HELPER FOR DPRNM
DPRNS1: CAIE T1,0 ;DO WE HAVE A SOURCE STRING?
HRLI T1,(POINT 7,) ;YES, MAKE IT A BYTE POINTER
HRLI T2,(POINT 7,) ;AND A DESTINATION BYTE POINTER TOO
DPRNS3: ILDB M0,T1 ;READ ANOTHER BYTE
DPRNS4: IDPB M0,T2 ;AND STUFF IT AWAY
JUMPN M0,DPRNS3 ;LOOP FOR WHOLE STRING
TLNE T2,760000 ;WORD ZERO'ED OUT YET?
JRST DPRNS4 ;NO
JRST .POPJ1 ;YES
;DPIAF -- SETUP FILE INFORMATION FROM DAP ATTRIBUTES
;CALL IS:
;
; PUSHJ P,DPIAF
; error return
; normal return
;
;On error return a serious incompatibility exists and could not be
;converted.
;
;On normal return, all possible DAP attributes have been converted and
;set into the corresponding file information fields within the CDB.
;
;Uses T1 - T4.
ENTRY .DPIAF
INTERN DPIAF0, DPIAF1
.DPIAF: PUSHJ P,.SACIO## ;SETUP I/O CDB INDEX
DPIAF0: PUSHJ P,.SAVE4## ;SAVE THE P'S
DPIAF1: SKIPE .IDNMS(IO) ;WAS SOME SORT OF NAME MESSAGE SEEN?
JRST DPIA10 ;YES, ASSUME FILE NAME STUFF OK FOR IOQAT
;NO NAME MESSAGES SEEN FOR THIS FILE, ASSUME A NON-WILDCARDED FILE ACCESS
;AND SET UP THE OPEN/LOOKUP/PATH BLOCKS FROM THE ORIGINAL FILE SPECIFICATION
;(ISN'T DAP WONDERFUL?)
DPIA00: MOVE T1,.IOFSY(IO) ;ADDRESS OF FILE SPEC BLOCK FROM LKWLN
MOVE P1,.FXNOD(T1) ;PRESERVE COPY OF NODE NAME
SETZM .FXNOD(T1) ;DON'T OFFEND .STOPB
MOVEI T2,.I1OPN(IO) ;ADDRESS OF RESULTANT OPEN BLOCK
MOVEI T3,.I1LKP(IO) ;ADDRESS OF RESULTANT LOOKUP BLOCK
MOVEI T4,.I1PT2(IO) ;ADDRESS OF RESULTANT PATH BLOCK
PUSHJ P,.STOPB## ;FAKE OUT THE FILE RESULTS
STOPCD <STOPB failed in DPIA00: wildcarded spec but no names returned>
MOVE T1,.IOFSY(IO) ;RESTORE ADDRESS OF FILE SPEC BLOCK
MOVEM P1,.FXNOD(T1) ;RESTORE ACTUAL NODE SPECIFICATION
; MOVEM P1,.I1NOD(IO) ;ALSO SET NODE WORD (SHOULD ALREADY BE SET)
MOVE T1,.I1FLP+.FODEV(IO) ;GET SPECIFIED DEVICE
MOVEM T1,.I1DEV(IO) ;FOR THOSE WHO CARE
SETZM .I1GEN(IO) ;AND IGNORE THE GENERATION NUMBER FOR NOW
AOS .CTDVS## ;COUNT AS AT LEAST ONE DEVICE SEEN
AOS .CTDRS## ; AND A DIRECTORY SEEN
AOS .CTDRF## ; AND A DIRECTORY FOUND
AOS .CTFLS## ; AND A FILE SEEN
AOS .CTFLF## ; AND A FILE FOUND TOO
;HANDLE THE MAIN ATTRIBUTES
;
;WHEN SETTING THE FILE-LEVEL PARAMETERS FROM THE CORRESPONDING DAP-LEVEL
;DATA THE MENU IS IGNORED. THIS IS SINCE MULTIPLE FILES CAN COME FROM A
;SINGLE "FILE ACCESS". DAP DOES NOT REQUIRE THAT ALL ATTRIBUTES BE SENT
;WITH EVERY FILE - THE FIELD(S) MAY BE LEFT BLANK (UNTRANSMITTED, AND SO
;NOT IN THE MENU) IF UNCHANGED. THEREFORE WE BLINDLY TRUST THE VARIOUS
;FIELDS, ASSUMING THAT FIRST DPWAF SET THEM UP RIGHT, AND THEY WILL BE
;OVERRIDDEN BY THE REMOTE FAL IF NEEDED.
DPIA10: MOVE P4,.IOIOM(IO) ;CARRY I/O MODE CONTROL IN P4
MOVD P1,M02 ;MAIN ATTRIBUTES MENU
PUSHJ P,DPID00 ;TRY TO MAKE SENSE OF DTY/RFM/RAT/BSZ
STOPCD ;CAN'T GET HERE
SKIPN .IOBSZ(IO) ;ENSURE A DATA BYTE SIZE IS AVAILABLE
STOPCD <No logical data bytesize in DPIA10>
MOVEI T4,^D36 ;-10 WORD SIZE
IDIV T4,.IOBSZ(IO) ;T4:=BYTES PER -10 WORD
LDB P3,[POINTR .IOIOC(IO),IC.RFM] ;GET RECORD FORMAT
CAIN P3,.ICRF3 ;36PACK'ED PDP-10 WORDS?
MOVEI T4,^D09 ;YES, SCREWS UP ALL THE CALCULATIONS
MOVD1 T1,BLS ;GET RETURNED DAP DATA BLOCK SIZE
JUMPE T1,[MOVE T2,.IOBSZ(IO) ;[1002] GET DATA BYTESIZE
CAIN T2,^D08 ;[1002] 8-BIT BYTES?
MOVEI T1,^D512 ;[1002] YEAH, ASSUME "DEFAULT" BLS VALUE
JRST .+1] ;[1002] AND CONTINUE LENGTH CALCULATIONS
MOVEM T1,.IOBLS(IO) ;AND SET FILE PARAMETER
CAIN P3,.ICRF3 ;36PACK'ED PDP-10 WORDS?
LSH T1,1 ;YES, SCREWS UP ALL THE CALCULATIONS
IDIV T1,T4 ;T1:=BLOCKSIZE (36-BIT WORDS)
CAIE T2,0 ;EXACT FIT?
ADDI T1,1 ;NO, NEED ONE MORE [PARTIAL] WORD
MOVEM T1,.IOBLW(IO) ;SET THAT FILE PARAMETER TOO
MOVD1 T1,MRS ;GET RETURNED DAP RECORDSIZE
MOVEM T1,.IORSZ(IO) ;AND SET FILE PARAMETER
MOVD1 T1,ALQ ;GET RETURNED DAP ALLOCATION ("BLOCKS")
IMUL T1,.IOBLS(IO) ;CONVERT TO DATA BYTES
MOVEM T1,.IOALB(IO) ;SET ALLOCATION IN BYTES FILE PARAMETER
MOVEM T1,.IOLNB(IO) ; FAKE LENGTH FROM ALQ UNTIL TOLD OTHERWISE
CAIN P3,.ICRF3 ;36PACK'ED PDP-10 WORDS?
LSH T1,1 ;YES, SCREWS UP ALL THE CALCULATIONS
IDIV T1,T4 ;T1:=FILE ALLOCATION IN -10 WORDS
CAIE T2,0 ;EXACT FIT?
ADDI T1,1 ;NO, NEED ONE MORE [PARTIAL] WORD
MOVEM T1,.IOALW(IO) ;SET ALLOCATION IN WORDS FILE PARAMETER
MOVE T2,T1 ;FILE ALLOCATION IN WORDS
ADDI T2,177 ;ROUND UP AND
LSH T2,-7 ;TRUNCATE TO 128(10) WORD BLOCKS
MOVEM T2,.I1LKP+.RBALC(IO) ;SET IN LOOKUP BLOCK TOO
DPIA16: TMNN P1,EBK ;GOT EXPLICIT END OF FILE BLOCK NUMBER?
JRST DPIA19 ;NO, FAKE FROM ALLOCATION THEN
MOVD1 T1,EBK ;END OF FILE BLOCK NUMBER
IMUL T1,.IOBLS(IO) ;T1:=END OF FILE IN BYTES (UPPER LIMIT)
MOVE T2,.IOBLS(IO) ;DATA BYTES PER BLOCK
MOVD1 T3,FFB ;FIRST FREE BYTE IN END OF FILE BLOCK
TMNN P1,FFB ;DO WE KNOW WHERE FFB IS?
TDZA T2,T2 ;NO
SUB T2,T3 ;YES, T2:=UNUSED BYTES WITHIN EBK
SUB T1,T2 ;T1:=FILE LENGTH IN DATA BYTES
MOVEM T1,.IOLNB(IO) ;SET LENGTH IN BYTES FILE PARAMETER
CAIN P3,.ICRF3 ;36PACK'ED PDP-10 WORDS?
LSH T1,1 ;YES, SCREWS UP ALL THE CALCULATIONS
IDIV T1,T4 ;T1:=FILE LENGTH IN -10 WORDS
CAIE T2,0 ;ANY TRAILING BYTES?
ADDI T1,1 ;ALLOW FOR TRAILING PARTIAL WORD
DPIA19: MOVEM T1,.IOLNW(IO) ;SET FILE LENGTH IN WORDS PARAMETER
MOVEM T1,.I1LKP+.RBSIZ(IO) ;ALSO SIMULATE LOOKUP BLOCK
;FAKE UP AN I/O MODE FOR THE LOOKUP BLOCK
DPIA20: SETO T1, ;NOTHING YET
MOVE T2,.IOBSZ(IO) ;LOGICAL DATA BYTESIZE
MOVD T3,DTY ;DATA TYPE FIELD
TFNN T3,<ASC,IMG> ;ENSURE SOMETHING WE KNOW ABOUT
STOPCD <No (or unknown) data type in DPIA20>
TFNE T3,ASC ;ASCII DATA?
MOVEI T1,.ICASC ;YES, ASCII FILE DATA MODE
TFNE T3,IMG ;IMAGE (BINARY) DATA?
MOVEI T1,.ICBIN ;YES, BINARY FILE DATA MODE
;*** CAIN T1,.ICBIN ;BINARY OR OTHERWISE?
;*** CAIE T2,^D08 ;BINARY, 8-BIT BYTES OR OTHERWISE?
;*** CAIA ;OTHERWISE
;*** MOVEI T1,.ICBYT ;8-BIT BINARY, CALL IT BYTE MODE
;***
;*** Don't use .ICBYT as a default, since on a COPY-type command
;*** from remote (-11, etc.) to local disk the output file ends up
;*** being defaulted to .IOBYT, which wins "Ill data mode" . . .
;*** so just leave it as /BINARY/BYTE:8, use "BYTE" as special mode.
DPB T1,[POINTR .IOIOC(IO),IC.MOD] ;SET FILE DATA MODE
MOVE T1,MOMDTB(T1) ;CONVERT TO TOPS-10 I/O DATA MODE
DPB T1,[POINTR .I1LKP+.RBPRV(IO),RB.MOD] ;FAKE OUT I/O MODE
;AND THE ASSOCIATED RECORD-FORMAT AS APPROPRIATE
MOVD T2,DTY ;GET DATA TYPE
TFNN T2,IMG ;IMAGE (BINARY) DATA?
TDZA T1,T1 ;NO, MUST BE CHARACTER (ASCII), BYTE MODE
MOVD1 T1,RFM ;YES, GET REMOTE RECORD FORMAT FIELD
LDB T2,[POINTR .IOIOC(IO),IC.RFM] ;GET SELECTED RFM
TXNE P4,IM.CMD ;DOES .IOIOC MODE OVERRIDE?
JRST [CAIN T2,.ICRF3 ;/RECFORMAT:36PACK ?
CAIE T1,.ICRFV ;YES, THEN REMOTE MUST BE "VARIABLE"
CAMN T1,T2 ;RESULTANT RFM WHAT WAS SPECIFIED?
JRST DPIA30 ;YES, RFM IS OK
STOPCD <Resultant RFM different from specified RFM>]
CAIE T2,.ICRF3 ;LEAVE "FAKED-OUT" IF /RECFORMAT:36PACK
DPB T1,[POINTR .IOIOC(IO),IC.RFM] ;SET RECORD FORMAT FIELD
;HANDLE FILE/DEVICE CHARACTERISTICS
DPIA30: PUSHJ P,DPDCH1 ;CONVERT DAP DCH INTO I/O CDB DCH
JFCL ;HUM
MOVEM T2,.IODCH(IO) ;SET FILE/DEVICE CHARACTERISTICS
;HANDLE DATE/TIME ATTRIBUTES
DPIA60: MOVD P1,M13 ;DATE/TIME ATTRIBUTES MENU
TMNN P1,CDT ;GOT A CREATION DATE/TIME?
TDZA T1,T1 ;NO, BLANK THE FIELD
MOVD1 T1,CDT ;GET RETURNED LOGICAL CREATION DATE/TIME
MOVEM T1,.IOCDT(IO) ;SET FILE PARAMETER
SKIPE T2,T1 ;ANYTHING THERE TO CONVERT?
PUSHJ P,.CNTDT## ;SPLIT INTO DATE AND TIME
DPB T2,[POINTR .I1LKP+.RBPRV(IO),RB.CRD] ;SET MOST OF DATE
LDB T2,[POINT 3,T2,23] ;POSITION AND
DPB T2,[POINTR .I1LKP+.RBEXT(IO),RB.CRX] ;SET REST OF DATE
IDIVI T1,^D60*^D1000 ;CONVERT TO MINUTES
DPB T1,[POINTR .I1LKP+.RBPRV(IO),RB.CRT] ;SET CREATION TIME
TMNN P1,UDT ;GOT UPDATE DATE/TIME?
TDZA T1,T1 ;NO, BLANK THE FIELD
MOVD1 T1,UDT ;GET RETURNED UPDATE DATE/TIME
MOVEM T1,.IOUDT(IO) ;SET UPDATE TIME FILE PARAMETER
TMNN P1,EDT ;GOT EXPIRATION DATE/TIME?
TDZA T1,T1 ;NO, BLANK THE FIELD
MOVD1 T1,EDT ;GET RETURNED EXPIRATION DATE/TIME
MOVEM T1,.IOEDT(IO) ;SET EXPIRATION DATE/TIME FILE PARAMETER
MOVEM T1,.I1LKP+.RBDED(IO) ;SET TOPS-10 EXPIRATION DATE/TIME
TMNN P1,BDT ;GOT BACKUP DATE/TIME?
TDZA T1,T1 ;NO, BLANK THE FIELD
MOVD1 T1,BDT ;GET RETURNED BACKUP DATE/TIME
MOVEM T1,.IOBDT(IO) ;SET BACKUP DATE/TIME FILE PARAMETER
MOVEM T1,.I1LKP+.RBIDT(IO) ;SET INCREMENTAL BACKUP DATE/TIME
TMNN P1,PDT ;GOT A PHYSICAL DATE/TIME?
TDZA T1,T1 ;NO, BLANK THE FIELD
MOVD1 T1,PDT ;GET PHYSICAL MEDIA CREATION DATE/TIME
MOVEM T1,.IOPDT(IO) ;SET PHYSICAL CREATION FILE PARAMETER
MOVEM T1,.I1LKP+.RBTIM(IO) ;SET TOPS-10 PHYSICAL MEDIA TIME
TMNN P1,ADT ;GOT ACCESS DATE/TIME?
TDZA T1,T1 ;NO, BLANK THE FIELD
MOVEM T1,.IOADT(IO) ;SET ACCESS TIME FILE PARAMETER
CAIE T1,0 ;ANYTHING THERE TO CONVERT?
PUSHJ P,.CNTDT## ;SPLIT INTO DATE AND TIME
DPB T1,[POINTR .I1LKP+.RBEXT(IO),RB.ACD] ;SET ACCESS DATE
;HANDLE PROTECTION ATTRIBUTES
;
;DPIA ASSUMES THAT THE PROTECTION FIELDS ARE ALL ONE WORD LONG. AS THIS
;IS NOT REALLY GUARANTEED, CAUSE ASSEMBLY ERROR IF IT EVER CHANGES
IFN $DLPSY-1,<PRINTX ?PSY field not one word long in DPIA70>
IFN $DLPOW-1,<PRINTX ?POW field not one word long in DPIA70>
IFN $DLPGR-1,<PRINTX ?PGR field not one word long in DPIA70>
IFN $DLPWL-1,<PRINTX ?PWL field not one word long in DPIA70>
DPIA70: MOVD P1,M14 ;PROTECTION ATTRIBUTES MENU
SETZ T2, ;DEFAULT FOR INPUT
MOVD T1,PWL ;GET RETURNED "WORLD" PROTECTION
TMNE P1,PWL ;GOT A "WORLD" PROTECTION?
PUSHJ P,DPFPXL ;TRANSLATE INTO TOPS-10 LEVEL-D DISK PROTECTION
DPIA72: LSHC T2,-3 ;SAVE VALUE SO FAR
SETZ T2, ;DEFAULT FOR INPUT
MOVD T1,PGR ;GET RETURNED "GROUP" PROTECTION
TMNE P1,PGR ;GOT A "GROUP" PROTECTION?
PUSHJ P,DPFPXL ;TRANSLATE INTO TOPS-10 LEVEL-D DISK PROTECTION
DPIA73: LSHC T2,-3 ;ACCUMULATE THIS "GROUP" FIELD TOO
SETZ T2, ;DEFAULT FOR INPUT
MOVD T1,POW ;GET RETURNED "OWNER" PROTECTION
TMNE P1,POW ;GOT "OWNER" PROTECTION?
PUSHJ P,DPFPXO ;TRANSLATE INTO TOPS-10 LEVEL-D DISK PROTECTION
DPIA74: LSHC T2,6 ;T2:=NINE-BIT TOPS-10 LEVEL-D DISK PROTECTION
ANDI T2,777 ;REDUCE TO KNOWN SIZE
DPB T2,[POINTR .I1LKP+.RBPRV(IO),RB.PRV] ;SET FILE PROTECTION
HRROM T2,.IOPRT(IO) ;SET IN FILE PARAMETERS BLOCK TOO
TMNN P1,<PWL,PGR,POW>;GOT A VIABLE PROTECTION CODE?
SETZM .IOPRT(IO) ;NO, NOT REALLY
DPIA99: JRST .POPJ1## ;SUCCESSFUL RETURN
;DPID - HELPER TO DPIAF TO TRY TO OUTGUESS DAP/FAL
DPID00: MOVD T1,DTY ;GET DAP DATA TYPE
TFNE T1,EBC ;EBCDIC?
STOPCD <EBCDIC returned data type in DPID00>
TFNE T1,<ASC,IMG> ;EITHER ASCII OR BINARY?
JRST DPID30 ;YES, DATA TYPE ALL SET
JUMPE T1,DPID10 ;ANYTHING TO GUESS FROM HERE?
TFNE T1,<EXE,PRV> ;IF EXECUTABLE AND/OR PRIVILEGED CODE
JRST DPID27 ;THEN BINARY DATA TYPE
DPID10: MOVD1 T2,BSZ ;GET DAP DATA BYTE SIZE
MOVD T3,RAT ;DAP RECORD ATTRIBUTES
MOVD1 T4,RFM ;DAP RECORD FORMAT
CAIE T4,$DVFST ;IF ASCII STREAM RECORDS
TFNE T3,<FCC,ILC,PRN,EFC,CCC,LSA> ;OR IF "CHAR"ISH ATTRIBUTES
JRST DPID28 ;ASSUME ASCII CHARACTERS
;NO DATA TYPE, AND CAN'T GUESS FROM RECORD FORMAT/ATTRIBUTES
DPID20: JUMPE T2,DPID28 ;NO IDEA WHATSOEVER IF NO BYTE SIZE
CAIN T2,^D08 ;IF OTHER THAN 8-BITS
JRST DPID28 ; (8-BITS, WILDLY GUESS ASCII)
DPID27: TFO T1,IMG ;NOT 8-BITS, ASSUME BINARY
WARNCD <Wildly guessing binary data>
JRST DPID29 ;GO DO IT
DPID28: TFO T1,ASC ;ASSUME ASCII DATA
WARNCD <Wildly guessing ASCII data>
DPID29: MOVDM T1,DTY ;SET DEFAULTED DATA TYPE
;NOW TRY FOR A DATA BYTE SIZE
DPID30: MOVD1 T2,BSZ ;DAP DATA BYTE SIZE
MOVD1 T3,OST ;REMOTE OPERATING SYSTEM TYPE
JUMPN T2,DPID37 ;GO WITH DAP'S FRAME SIZE IF PRESENT
TFNN T1,ASC ;LOOKING AT ASCII DATA TYPE?
JRST DPID33 ;NO, MUST BE BINARY
MOVE T2,[^D07,,^D07] ;DEFAULT ASCII DATA AND FRAME SIZES
;*** This happens so often that I got tired of the message - am I the
;*** the only one who sends the byte size???? RSX, VAX, and even the
;*** -20 doesn't!!! Jeez!!!!!
;*** WARNCD <Wildly defaulting ASCII data byte size in DPID30>
JRST DPID38 ;GO SET FILE PARAMETERS
;BINARY DATA TYPE
DPID33: CAIE T3,$DVOT1 ;IF EITHER TOPS-10
CAIN T3,$DVOT2 ;OR TOPS-20
SKIPA T2,[^D36,,^D36] ;THEN BINARY DATA COMES IN 36-BIT BYTES
MOVE T2,[^D08,,^D08] ;ALL OTHERS TALK TWEENY WEENY 8-BIT BYTES
WARNCD <Wildly defaulting binary data byte size in DPID30>
JRST DPID38 ;GO SET FILE PARAMETERS
DPID37: TFNE T1,ASC ;ASCII CHARACTER DATA?
SKIPA T2,[^D07,,^D07] ;YES, 7-BIT DATA THEN
TSO T2,T2 ;NO, ARBITRARY DATA BYTE SIZE
DPID38: LDB T1,[POINTR .IOIOC(IO),IC.RFM] ;GET RECORD FORMAT
CAIN T1,.ICRF3 ;36PACK'ED PDP-10 WORDS?
MOVE T2,[^D36,,^D36] ;YES, THEN ULTIMATELY DEALING IN 36-BIT WORDS
HLRZM T2,.IOBSZ(IO) ;SET LOGICAL DATA BYTE SIZE
HRRZM T2,.IOFSZ(IO) ;SET PHYSICAL FRAME BYTE SIZE
;NOW CHECK OUT RECORD FORMAT
DPID40: MOVD T1,M02 ;MAIN ATTRIBUTES MENU FIELD
TMNE T1,RFM ;GOT A RECORD FORMAT?
JRST DPID50 ;YEAH, SET HERE
MOVD1 T1,RFM ;GET CURRENT SOMETHING-OR-OTHER
JUMPN T1,DPID50 ;IF SOMETHING THERE, JUST KEEP IT
MOVEI T1,$DVFFX ;NO, DEFAULT IS FIXED-LENGTH RECORDS
MOVD1M T1,RFM ; (TOPS-10/20 ALWAYS SENDS RFM FIELD)
DPID50: JRST .POPJ1## ;HO HUM
;DPWAF -- SETUP DAP ATTRIBUTES FROM LOCAL FILE INFORMATION
;CALL IS:
;
; MOVX T1,<CDB>
; PUSHJ P,DPWAF
; error return
; normal return
;
;Where <CDB> is the address of the I/O channel data block controlling
;the DAP-level remote file access link.
;
;DPWAF sets the DAP area(s) from the file- and command-level parameters
;preparatory to a DAP "read" file access. All attributes fields will be
;set/defaulted/cleared as needed. Even fields not to be sent will be
;set/defaulted/cleared so that the field may be referenced (since DAP
;leaves this rather vague).
;
;On error return, a serious incompatibility exists and could not be
;converted (such as an item too big to fit in its DAP field).
;
;On normal return all possible file attributes have been DAPed and
;are ready to be sent to the remote. The file specification as set
;in .IOFSY has also been DAPed.
;
;Uses T1 - T4.
ENTRY .DPWAF
INTERN DPWAF0, DPWAF1
.DPWAF: PUSHJ P,.SACIO## ;SETUP I/O CDB INDEX
DPWAF0: PUSHJ P,.SAVE4## ;SAVE THE P'S
DPWAF1:
;SETUP ATTRIBUTES
DPWA00: MOVE P3,.IOFSC(IO) ;GET ADDRESS OF FILE SPEC BLOCK
MOVE P4,.IOIOM(IO) ;GET I/O MODE FLAGS
;MAIN ATTRIBUTES
DPWA10: SETZB P1,P2 ;INITIAL MAIN ATTRIBUTES MENU
LDB T1,[POINTR .IOIOC(IO),IC.MOD] ;GET FILE DATA MODE
TXNE P4,IM.CMD ;DOES .IOIOC MODE OVERRIDE?
JRST DPWA11 ;YUP, USE .IOIOC AS IS
MOVE T3,.FXCTM(P3) ;GET CONTROL SWITCH MASKS
TXNE T3,FX.IOM ;WAS /IOMODE GIVEN?
LDB T2,[POINTR .FXCTL(P3),FX.IOM] ;YES, GET /IOMODE VALUE
TXNE T3,FX.DAM ;WAS /DATAMODE GIVEN?
LDB T2,[POINTR .FXCTL(P3),FX.DAM] ;YES, GET /DATAMODE VALUE
TXNE T3,FX.DAM!FX.IOM;IF USER SPECIFYING MODE
MOVE T1,MDMOTB(T2) ;THEN PICK UP INTERNAL FILE MODE TRANSLATION
DPB T1,[POINTR .IOIOC(IO),IC.MOD] ;SET SELECTED FILE MODE
DPWA11: JUMPN T1,DPWA12 ;IF SET, BELIEVE IT
TXNN P4,IM.SMD ;NO MODE GIVEN, ALLOWED TO SELECT FILE DEFAULT?
JRST DPWA12 ;NO, DEFAULT TO ASCII
SETZB T3,T4 ;INITIALLY 0
MOVDM T3,DTY ;NO DATA TYPE SET
JRST DPWA13 ;LET REMOTE TELL US WHAT MODE TO USE
DPWA12: SETZB T3,T4 ;INITIALLY 0
CAIN T1,.ICDEF ;DEFAULT (UNSPECIFIED)?
TFO T3,ASC ;YES, ASCII CHARACTER DATA
CAIE T1,.ICASC ;ASCII?
CAIN T1,.ICAS8 ;ASCII 8-BIT?
TFO T3,ASC ;YES, ASCII CHARACTER DATA
; CAIN T1,.ICEBC ;EBCDIC?
; TFO T3,EBC ;YES, EBCDIC CHARACTER DATA
CAIE T1,.ICPIM ;PACKED IMAGE?
CAIN T1,.ICIMG ;REGULAR IMAGE?
TFO T3,IMG ;YES, IMAGE DATA
CAIE T1,.ICBYT ;8-BIT BYTE DATA?
CAIN T1,.ICBIN ;BINARY DATA?
TFO T3,IMG ;YES, IMAGE DATA
TFNN T3,<ASC,IMG> ;WAS SOME DATA TYPE SELECTED?
STOPCD <No (or unknown) file data type in DPWA11>
MOVDM T3,DTY ;SET DAP FILE DATA TYPE
TMO P1,DTY ;MARK DATA TYPE FIELD TO BE SENT
DPWA13: MOVDII T3,ORG,$DVOSQ ;ALL FILE ACCESSES ARE SEQUENTIAL
MOVDM T3,ORG ;SET MAIN ATTRIBUTES FILE ORGANIZATION
TMO P1,ORG ;MARK FILE ORGANIZATION TO BE SENT
DPWA15: LDB T3,[POINTR .IOIOC(IO),IC.RFM] ;GET .IOIOC RECORD FORMAT
TXNE P4,IM.CMD ;DOES .IOIOC MODE OVERRIDE?
JRST DPWA16 ;MUST USE .IOIOC AS IT STANDS
LDB T2,[POINTR .FXCTM(P3),FX.RFM] ;/RECFORMAT MASK
JUMPN T2,[LDB T3,[POINTR .FXCTL(P3),FX.RFM] ;GET /RECFORMAT TYPE
JRST DPWA16] ;AND SET RECORD FORMAT FIELD
TXNN P4,IM.SMD ;NO /RECFORMAT, ALLOWED TO SELECT DEFAULT?
DPWA16: TMO P1,RFM ;SET RECORD FORMAT IN MENU
DPWA17: DPB T3,[POINTR .IOIOC(IO),IC.RFM] ;SET .IOIOC RECORD FORMAT
CAIN T3,.ICRF3 ;/RECFORMAT:36PACK?
JRST [MOVEI T3,.ICIMG ;YES, IMAGE/BINARY DATA THEN
DPB T3,[POINTR .IOIOC(IO),IC.MOD] ;SET NEW DATA MODE
MOVD T3,DTY ;RETRIEVE DATATYPE FIELD
TFZ T3,<ASC,EBC> ;NOT CHARACTER DATA
TFO T3,IMG ;BUT RATHER IMAGE DATA
MOVDM T3,DTY ;RESET DATATYPE FIELD
TMO P1,DTY ;MAKE SURE IT GOES OUT
MOVEI T3,.ICRFV ;TELL REMOTE "VARIABLE" RFM
JRST .+1] ;CONTINUE ONWARDS
MOVD1M T3,RFM ;SET MAIN ATTRIBUTES RECORD FORMAT
DPWA18: SETZB T3,T4 ;NO-VALUE VALUE
MOVE T1,.IOIOC(IO) ;GET I/O CONTROL FLAGS
TXNE T1,IC.LSN ;WANT LINE-SEQUENCED ASCII?
TFO T3,LSA ;YES
TXNE T1,IC.MCY!IC.MEY;IS DATA MACY11-FORMATTED?
TFO T3,MCY ;YES
MOVDM T3,RAT ;SET MAIN ATTRIBUTES RECORD ATTRIBUTES
TMO P1,RAT ;SET RECORD ATTRIBUTES IN MENU
DPWA20: SKIPG T3,.FXBLS(P3) ;GOT A BLOCKSIZE SET?
TDZA T3,T3 ;NO, NO VALUE
TMO P1,BLS ;YES, MARK BLOCKSIZE FIELD TO BE SENT
MOVD1M T3,BLS ;SET MAIN ATTRIBUTES BLOCKSIZE FIELD
DPWA21: SKIPG T3,.FXRSZ(P3) ;GOT A RECORDSIZE SET?
TDZA T3,T3 ;NO, NO VALUE
TMO P1,MRS ;YES, MARK RECORDSIZE TO BE SENT
MOVD1M T3,MRS ;SET MAIN ATTRIBUTES RECORDSIZE FIELD
DPWA22: SETZ T3, ;NO BYTE SIZE(S) YET
SKIPLE .FXBSZ(P3) ;USER SPECIFY /BYTESIZE?
HRL T3,.FXBSZ(P3) ;YES
SKIPLE .FXFSZ(P3) ;USER SPECIFY /FRAMESIZE?
HRR T3,.FXFSZ(P3) ;YES
MOVE T4,.IOUBS(IO) ;OVERRIDING BYTE SIZE(S) - IF ANY
TLNE T4,-1 ;OVERRIDING DATA BYTE SIZE?
HLL T3,T4 ;YES
TRNE T4,-1 ;OVERRIDING FRAME SIZE?
HRR T3,T4 ;YES
TLNE T3,-1 ;LACKING A DATA SIZE?
TRNN T3,-1 ;OR A FRAME SIZE?
TSO T3,T3 ;YES, DEFAULT ONE FROM THE OTHER
LDB T4,[POINTR .IOIOC(IO),IC.RFM] ;GET RECORD FORMAT TYPE
CAIN T4,.ICRF3 ;36PACK'ED PDP-10 WORDS?
MOVE T3,[^D36,,^D36] ;YES, THEN REALLY 36-BIT WORDS
HLRZM T3,.IOBSZ(IO) ;SET LOGICAL DATA BYTE SIZE
HRRZM T3,.IOFSZ(IO) ;SET PHYSICAL FRAME BYTE SIZE
ANDI T3,-1 ;REDUCE TO JUST FRAME SIZE
CAIN T4,.ICRF3 ;36PACK'ED WORDS?
MOVEI T3,^D08 ;YES, FAKE OUT REMOTE WITH 8-BIT BYTES
MOVD1M T3,BSZ ;SET MAIN ATTRIBUTES BYTESIZE FIELD
JUMPE T3,DPWA25 ;DON'T SEND A BLANK BYTE SIZE
TMO P1,BSZ ;MARK BYTESIZE FIELD TO BE SENT
DPWA25: SETZB T3,T4 ;NO VALUE
MOVDM T3,ALQ ;NO ALLOCATION YET
MOVDM T3,FSZ ;NO FIXED HEADER SIZE
MOVEM T3,.IDRTS(IO) ;NO RUNTIME SYSTEM NAME
MOVDM T3,DEQ ;NO DEFAULT EXTENSION QUANTITY
MOVDM T3,FOP ;NO OPTIONS NEEDED ON READ ACCESS
MOVDM T3,DEV ;NO DEVICE CHARACTERISTICS YET
MOVDM T3,SDC ;NO SPOOLING CHARACTERISTICS EITHER
MOVDM T3,LRL ;NO LONGEST RECORD LENGTH
MOVDM T3,HBK ;NO HIGHEST BLOCK ALLOCATED YET
MOVDM T3,EBK ;NO END-OF-FILE BLOCK NUMBER YET
MOVDM T3,FFB ;NO FIRST FREE BYTE WITHIN EBK YET
MOVDM T3,SBN ;NO STARTING BLOCK NUMBER ON MEDIA YET
MOVDM P1,M02 ;SET MAIN ATTRIBUTES MENU FIELD
;CLEAR OUT KEY DEFINITION ATTRIBUTES
DPWA40: SETZB T3,T4 ;NO VALUE
MOVDM T3,M10 ;NO FIELDS IN KEY DEFINITIONS
;CLEAR OUT ALLOCATION ATTRIBUTES
MOVDM T3,M11 ;NO FIELDS IN ALLOCATION ATTRIBUTES
MOVDM T3,VOL ;NO RELATIVE VOLUME NUMBER
MOVDM T3,ALN ;NO ALIGNMENT OPTIONS
MOVDM T3,ALP ;NO ALLOCATION OPTIONS
MOVDM T3,LOC ;NO ALLOCATION LOCATION
MOVDM T3,AAL ;NO FILE ALLOCATION
MOVDM T3,AEQ ;NO DEFAULT EXTENSION QUANTITY
;CLEAR OUT SUMMARY ATTRIBUTES
MOVDM T3,M12 ;NO FIELDS IN SUMMARY ATTRIBUTES
;CLEAR OUT DATE/TIME ATTRIBUTES
DPWA60: SETZB T3,T4 ;NO VALUE
MOVDM T3,M13 ;NO FIELDS IN DATE/TIME ATTRIBUTES
MOVDM T3,CDT ;NO CREATION DATE/TIME
MOVDM T3,UDT ;NO UPDATE DATE/TIME
MOVDM T3,EDT ;NO DELETE DATE/TIME
MOVDM T3,RVN ;NO REVISION NUMBER
MOVDM T3,BDT ;NO BACKUP DATE/TIME
MOVDM T3,PDT ;NO PHYSICAL DATE/TIME
MOVDM T3,ADT ;NO ACCESS DATE/TIME
;CLEAR OUT PROTECTION ATTRIBUTES
MOVDM T3,M14 ;NO FIELDS IN PROTECTION ATTRIBUTES
DMOVEM T3,.IDPNM(IO) ;NO OWNER NAME STRING
MOVDM T3,PSY ;NO SYSTEM PROTECTION CODE YET
MOVDM T3,POW ;NO OWNER PROTECTION CODE YET
MOVDM T3,PGR ;NO GROUP PROTECTION CODE YET
MOVDM T3,PWL ;NO WORLD PROTECTION CODE YET
DPWA99: JRST .POPJ1## ;SUCCESSFUL RETURN
;DPWAA -- SETUP DAP ACCESS MESSAGE FROM [WILD INPUT] FILE SPECIFICATION
;Call is:
;
; MOVX T1,<CDB>
; PUSHJ P,DPWAA
; error return
; normal return
;
;Where <CDB> is the address of the controlling I/O CDB.
;
;DPWAA will clear out the ACCESS message data area (excepting the function
;field which is left untouched), then fill in the file specification and
;password fields from the CDB's file spec block pointer (.IOFSC). If the
;remote supports file data checksumming then DPWAA will set the ACCESS
;options field to request same.
;
;On error return the ACCESS message could not be translated (the file
;specification was too big, etc.). An error code is in M0.
;
;On normal return the ACCESS message is ready to be sent (XDDAP), excepting
;the access function field, which must be correctly set by the caller.
;
;Uses T1 - T4.
ENTRY .DPWAA
INTERN DPWAA0, DPWAA1
.DPWAA: PUSHJ P,.SACIO## ;SETUP I/O CDB INDEX
DPWAA0: PUSHJ P,.SAVE4## ;SAVE THE P'S
DPWAA1: XMOVEI T1,DTYPO ;OUR OWN PRIVATE TYPER
PUSHJ P,.XTYPO## ;INTERCEPT AND SETUP TYPEOUT
;FIRST INITIALIZE THE ACCESS MESSAGE FIELDS
SETZB T1,T2 ;INITIAL (NO VALUE) VALUE
MOVDM T1,AFC ;CLEAR ACCESS FUNCTION FIELD
MOVDM T1,FAC ;CLEAR ACCESS OPERATIONS
MOVDM T1,SHR ;CLEAR SHARED OPERATIONS
MOVDM T1,ADS ;CLEAR ACCESS DISPLAY
;TRY FOR FILE DATA CHECKSUMMING
MOVDII T1,AOP,ACK ;ASSUME (HOPE) REMOTE SUPPORTS CHECKSUMMING
MOVD T3,CNF ;REMOTE'S CONFIGURATION FLAGS
TFNN T3,FCK ;DOES REMOTE SUPPORT FILE DATA CHECKSUMMING?
TFZ T1,ACK ;NO (BOO HISS), THEN DON'T REQUEST IT
MOVDM T1,AOP ;SET BASIC ACCESS OPTIONS
;CONVERT FILE SPECIFICATION INTO DAP ACCESS MESSAGE FILE SPEC FIELD
MOVE P3,[$DBFIL,,.IDFIL] ;7-BIT BYTE STUFFER PROTOTYPE
PUSHJ P,DP3P4 ;SETUP .IODP3/.IODP4 AS COUNTER/POINTER
STOPCD <DP3P4 failed in DPWAA1>
SKIPN T1,.IOFSY(IO) ;ADDRESS OF FILE SPEC BLOCK FROM LKWLN
STOPCD <No FSB for filespec in DPWAA>
PUSHJ P,DPGAAT ;GET FILE SPEC CONTROL FLAGS IN T2
TXNE T2,FX.UDV ;WANT TO DO A DEVICE FIELD?
SKIPA T3,.FSDEV(T1) ;YES, ADDRESS OF DEVICE SPECIFICATION STRING
SETZ T3, ;NO
MOVEM T3,.IOFDV(IO) ;SET DEVICE NAME IN CASE OF PREMATURE ERROR
TXNE T2,FX.UDR ;WANT TO DO A DIRECTORY FIELD?
SKIPA T3,.FSDIR(T1) ;YES, ADDRESS OF DIRECTORY SPECIFICATION STRING
SETZ T3, ;NO
MOVEM T3,.IOFDR(IO) ;SET DIRECTORY NAME IN CASE OF PREMATURE ERROR
TXNE T2,FX.UNM ;WANT TO DO A FILE NAME FIELD?
SKIPA T3,.FSNAM(T1) ;YES, ADDRESS OF FILE NAME SPECIFICATION STRING
SETZ T3, ;NO
MOVEM T3,.IOFNM(IO) ;SET FILE NAME IN CASE OF PREMATURE ERROR
TXNE T2,FX.UEX ;WANT TO DO A EXTENSION FIELD?
SKIPA T3,.FSEXT(T1) ;YES, ADDRESS OF EXTENSION SPECIFICATION STRING
SETZ T3, ;NO
MOVEM T3,.IOFEX(IO) ;SET EXTENSION NAME IN CASE OF PREMATURE ERROR
TXNE T2,FX.UGN ;WANT TO DO A GENERATION FIELD?
SKIPA T3,.FSGEN(T1) ;YES, ADDRESS OF GENERATION SPECIFICATION STRING
SETZ T3, ;NO
MOVEM T3,.IOFGN(IO) ;SET GENERATION NAME IN CASE OF PREMATURE ERROR
PUSHJ P,.TOFSB## ;SET THE FILE SPEC INTO THE DAP AREA
DMOVE P3,.IODP3(IO) ;GET TERMINAL BYTE COUNTER/POINTER
AOBJP P3,DPWAE1 ;ERROR IF OVERFLOWED
MOVEI T1,0 ;A NULL
IDPB T1,P4 ;TO ASCIZIZE THE FILE SPEC STRING
;PASS ALONG ANY PASSWORD SUPPLIED
MOVE P3,[$DBPSW,,.IDPSW] ;7-BIT BYTE STUFFER PROTOTYPE
PUSHJ P,DP3P4 ;SETUP .IODP3/.IODP4 AS COUNTER/STUFFER
STOPCD <DP3P4 failed in DPWAA1>
SKIPN T1,.IOFSC(IO) ;ADDRESS OF USER'S CURRENT FILE SPEC BLOCK
STOPCD <No FSB for password in DPWAA>
ADDI T1,.FXPSW ;POINT TO THE PASSWORD STRING
PUSHJ P,.TSTRG## ;PUT IT INTO THE PASSWORD FIELD
DMOVE P3,.IODP3(IO) ;GET TERMINAL BYTE COUNTER/POINTER
AOBJP P3,DPWAE2 ;ERROR IF OVERFLOWED
MOVEI T1,0 ;A NULL
IDPB T1,P4 ;TO ASCIZIZE THE PASSWORD STRING
;ACCESS MESSAGE ALL SET AND READY
JRST .POPJ1## ;SUCCESSFUL RETURN
;FILE SPEC STRING TOO BIG
DPWAE1: MOVEI M0,$EFRFB ;FILE SPECIFICATION (STRING) TOO BIG
POPJ P, ;ERROR RETURN
;FILE PASSWORD STRING TOO BIG
DPWAE2: MOVEI M0,$EFRSB ;GENERIC STRING TOO BIG ERROR
POPJ P, ;ERROR RETURN
;DPWAN -- SETUP DAP NAME MESSAGE FROM TERTIARY FILE SPECIFICATION
;Call is:
;
; MOVX T1,<CDB>
; PUSHJ P,DPWAN
; error return
; normal return
;
;Where <CDB> is the address of the controlling I/O CDB.
;
;DPWAN will set the NAME message fields with the tertiary file
;specification as used in a (e.g.) rename command.
;
;On error return the NAME message could not be translated (the file
;specification was too big, etc.). An error code is in M0.
;
;On normal return the NAME message is ready to be sent (XDDAP).
;
;Uses T1 - T4.
ENTRY .DPWAN
INTERN DPWAN0, DPWAN1
.DPWAN: PUSHJ P,.SACIO## ;SETUP I/O CDB INDEX
DPWAN0: PUSHJ P,.SAVE4## ;SAVE THE P'S
DPWAN1: MOVEI T1,DTYPO ;OUR OWN PRIVATE TYPER
PUSHJ P,.XTYPO## ;INTERCEPT AND SETUP TYPEOUT
;CONVERT FILE SPECIFICATION INTO DAP NAME MESSAGE FILE SPEC FIELD
MOVE P3,[$DBNMS,,.IDNMS] ;7-BIT BYTE STUFFER PROTOTYPE
PUSHJ P,DP3P4 ;SETUP .IODP3/.IODP4 AS COUNTER/POINTER
STOPCD <DP3P4 failed in DPWAN1>
MOVE T1,.IOFS3(IO) ;ADDRESS OF TERTIARY FILE SPEC BLOCK
PUSHJ P,DPGAAT ;GET FILE SPEC CONTROL FLAGS IN T2
TXZ T2,FX.UFS ;DON'T WANT ANY SWITCHES HERE!
PUSHJ P,.TOFSB## ;SET THE FILE SPEC INTO THE DAP AREA
DMOVE P3,.IODP3(IO) ;GET TERMINAL BYTE COUNTER/POINTER
AOBJP P3,DPWAE1 ;ERROR IF OVERFLOWED
MOVEI T1,0 ;A NULL
IDPB T1,P4 ;TO ASCIZIZE THE FILE SPEC STRING
;SET FULL FILE SPECIFICATION NAME TYPE
MOVDII T1,NTY,NFS ;FULL FILE SPECIFICATION
MOVDM T1,NTY ;SET NAME MESSAGE TYPE
;NAME MESSAGE ALL SET AND READY
JRST .POPJ1## ;SUCCESSFUL RETURN
;DPOAF -- SETUP DAP ATTRIBUTES FROM LOCAL FILE INFORMATION
;CALL IS:
;
; MOVX T1,<CDB>
; PUSHJ P,DPOAF
; error return
; normal return
;
;Where <CDB> is the address of the I/O channel data block controlling
;the DAP-level remote file access link.
;
;DPOAF sets the DAP area(s) from the file- and command-level parameters
;preparatory to a DAP "write" file access. All attributes fields will be
;set/defaulted/cleared as needed. Even fields not to be sent will be
;set/defaulted/cleared so that the field may be referenced (since DAP
;leaves this rather vague). Additionally the file and password fields
;of the access message are set, and all other access fields are cleared.
;
;On error return, a serious incompatibility exists and could not be
;converted (such as an item too big to fit in its DAP field).
;
;On normal return, all possible file attributes have been DAPed and
;are ready for whatever DAP attributes messages need to be sent.
;
;Uses T1 - T4.
ENTRY .DPOAF
INTERN DPOAF0, DPOAF1
.DPOAF: PUSHJ P,.SACIO## ;SETUP I/O CDB INDEX
DPOAF0: PUSHJ P,.SAVE4## ;SAVE THE P'S
DPOAF1:
;NOW SETUP ATTRIBUTES
DPOA00: MOVE P3,.IOIOC(IO) ;I/O CONTROL
MOVE P4,.IOIOM(IO) ;I/O MODE
;MAIN ATTRIBUTES FIELDS
DPOA10: LDB T1,[POINTR P3,IC.MOD] ;PICKUP INTERNAL DATA MODE
SETZB T3,T4 ;INITIALIZE FLAGS
CAIE T1,.ICDEF ;NONE (?) - DEFAULT IS ASCII
CAIN T1,.ICASC ;7-BIT ASCII?
TFO T3,ASC ;YES
CAIN T1,.ICAS8 ;8-BIT ASCII?
TFO T3,ASC ;YES
CAIN T1,.ICEBC ;EBCDIC?
TFO T3,EBC ;YES
CAIE T1,.ICPIM ;PACKED IMAGE?
CAIN T1,.ICIMG ;OR NORMAL IMAGE?
TFO T3,IMG ;YES
CAIE T1,.ICBYT ;BYTE MODE?
CAIN T1,.ICBIN ;OR BINARY MODE?
TFO T3,IMG ;YES
TFNN T3,<ASC,EBC,IMG>;HAS A MODE BEEN SELECTED?
STOPCD <No (or unknown) DAP file data mode in DPOA10>
TXNE P4,IM.ZOD ;ZERO ON DELETE?
TFO T3,ZOD ;YES
MOVDM T3,DTY ;SET MAIN ATTR DATA TYPE FIELD
DPOA12: MOVE P1,.IOFSC(IO) ;ADDRESS OF FILE SPEC BLOCK
SETZ T2, ;NO BYTESIZES YET
TFNE T3,ASC ;ASCII DATA?
MOVE T2,[^D07,,^D08] ;YES, CHARACTER DATA ALWAYS 8-BIT FRAMES
SKIPLE .FXBSZ(P1) ;USER SUPPLY A DATA BYTESIZE?
HRL T2,.FXBSZ(P1) ;YES, USE IT
SKIPLE .FXFSZ(P1) ;USER SUPPLY A FRAME BYTESIZE?
HRR T2,.FXFSZ(P1) ;YES, USE IT
TLNE T2,-1 ;GOT BOTH A DATA
TRNN T2,-1 ;AND A FRAME SIZE?
TSO T2,T2 ;NO, DEFAULT ONE FROM THE OTHER
TLNN T2,-1 ;GOT A DATA BYTESIZE?
HLL T2,.IODBS(IO) ;NO, PICK UP PROGRAM DEFAULT, IF ANY
TRNN T2,-1 ;GOT A FRAME BYTESIZE?
HRR T2,.IODBS(IO) ;NO, PICK UP PROGRAM DEFAULT, IF ANY
MOVE T3,.IOUBS(IO) ;GET USER OVERRIDING <DATA,,FRAME> SIZES
TLNE T3,-1 ;GOT OVERRIDING DATA BYTE SIZE?
HLL T2,T3 ;YES, USE HIS DATA BYTE SIZE
TRNE T3,-1 ;GOT OVERRIDING FRAME BYTE SIZE?
HRR T2,T3 ;YES, USE HER FRAME BYTE SIZE
TLNE T2,-1 ;GOT A DATA BYTESIZE?
TRNN T2,-1 ;AND A FRAME BYTESIZE TOO?
TSO T2,T2 ;NO, DEFAULT ONE FROM THE OTHER
CAIN T2,0 ;STILL HAVE NO BYTESIZE?
MOVE T2,MOSZTB(T1) ;GET I/O-MODE DATA AND FRAME BYTE SIZES
HLRZM T2,.IOBSZ(IO) ;SET LOGICAL DATA BYTE SIZE
HRRZM T2,.IOFSZ(IO) ;SET PHYSICAL FRAME SIZE
TLNN T2,-1 ;MUST HAVE A DATA BYTE SIZE
STOPCD <No byte size in DPOA12>
SKIPN T3,.IOFSZ(IO) ;GET PHYSICAL FRAME SIZE
MOVE T3,.IOBSZ(IO) ;NONE, USE LOGICAL DATA BYTE SIZE
MOVD1M T3,BSZ ;SET MAIN ATTR BYTE SIZE FIELD
DPOA15: MOVDII T3,ORG,$DVOSQ ;ALL FILE ACCESSES ARE SEQUENTIAL
MOVDM T3,ORG ;SET MAIN ATTR FILE ORGANIZATION FIELD
MOVD1 T2,OST ;REMOTE (FAL) OPERATING SYSTEM TYPE
CAILE T2,$DVOMX ;IS THIS A SYSTEM WE KNOW ABOUT?
JRST [OUTSTR [ASCIZ\[Unknown OS type, defaulting to RSX-11M]
\]
MOVEI T2,$DVORM ;RSX-11M
JRST .+1] ;MAKE A WILD GUESS AT IT
MOVD T3,DTY ;RETRIEVE DATA TYPE FLAGS
TFNN T3,ASC ;DEALING IN ASCII CHARACTER DATA?
JRST DPOA17 ;NO, BINARY
;SELECT RECORD FORMAT AND ATTRIBUTES FOR ASCII DATA
DPOA16: MOVE T3,DARFTB(T2) ;ASCII, GET APPROPRIATE RECORD FORMAT
TXNE P3,IC.LSN ;WANT LINE-SEQUENCED ASCII?
JRST [MOVEI T3,6 ;YES, NEED 6-BYTE FIXED HEADER
MOVD1M T3,FSZ ;FLAG FIXED HEADER SIZE
MOVEI T3,$DVFST ;FORMAT: "STREAM"
JRST .+1] ;BLUNDER ONWARDS
MOVD1M T3,RFM ;SET MAIN ATTR RECORD FORMAT FIELD
MOVE T3,DARATB(T2) ;ASCII, GET APPROPRIATE RECORD ATTRIBUTES
SETZ T4, ;FINISH OFF INITIAL FLAGS POTENTIAL WORDS
TXNE P3,IC.LSN ;WANT LINE-SEQUENCED ASCII?
TFO T3,LSA ;YES, THE POOR DUMB FOOL
TXNE P3,IC.CCC ;COBOL CARRIAGE CONTROL?
TFO T3,CCC ;YES
TXNE P3,IC.FCC ;FORTRAN CARRIAGE CONTROL?
TFO T3,FCC ;YES
MOVDM T3,RAT ;SET MAIN ATTR RECORD ATTRIBUTES FIELD
JRST DPOA19 ;CONTINUE WITH REST OF MAIN ATTR
;SELECT RECORD FORMAT AND ATTRIBUTES FOR IMAGE (BINARY) DATA
DPOA17: MOVE T1,.IOFSC(IO) ;ADDRESS OF FILE SPEC BLOCK
LDB T3,[POINTR .IOIOC(IO),IC.RFM] ;GET RECORD FORMAT SPEC
TXNE P4,IM.CMD ;DOES .IOIOC OVERRIDE?
JRST DPOA18 ;YES, DISREGARD /RECFORMAT THEN
MOVE T4,.FXCTM(T1) ;CONTROL SWITCHES MASK
TXNN T4,FX.RFM ;USER SPECIFY /RECFORMAT?
SKIPA T3,DBRFTB(T2) ;NO, DEFAULT AN APPROPRIATE RECORD FORMAT
LDB T3,[POINTR .FXCTL(T1),FX.RFM] ;YES, USE HIS RECORD FORMAT
DPB T3,[POINTR .IOIOC(IO),IC.RFM] ;SET SELECTED RECORD FORMAT
DPOA18: CAIN T3,.ICRF3 ;/RECFORMAT:36PACK?
JRST [MOVE T3,[^D36,,^D36] ;YES, THEN DATA IS 36-BIT WORDS
HLRZM T3,.IOBSZ(IO) ;SET LOGICAL DATA BYTE SIZE
HRRZM T3,.IOFSZ(IO) ;SET PHYSICAL FRAME SIZE
MOVEI T3,^D08 ;DEAL WITH REMOTE IN 8-BIT BYTES
MOVD1M T3,BSZ ;SET MAIN ATTR BYTE SIZE FIELD
MOVD T3,DTY ;RETRIEVE DATA TYPE
TFZ T3,<ASC,EBC> ;NOT CHARACTER DATA
TFO T3,IMG ;BUT RATHER IMAGE/BINARY DATA
MOVDM T3,DTY ;TELL REMOTE THAT TOO
MOVEI T3,.ICRFV ;TELL REMOTE "VARIABLE" RFM
JRST .+1] ;SO MUCH FOR TRUTH-IN-ADVERTISING
CAIN T3,$DVFVF ;VARIABLE WITH FIXED CONTROL?
STOPCD <Record format not supported at DPOA18>
MOVD1M T3,RFM ;SET MAIN ATTR RECORD FORMAT FIELD
MOVE T3,DBRATB(T2) ;APPROPRIATE RECORD ATTRIBUTES
MOVE T4,.FXCTL(T1) ;CONTROL SWITCHES
TXNN P4,IM.CMD ;IGNORE USER SPEC IF .IOIOC OVERRIDES
TXNN T4,FX.MCY!FX.MEY;USER SPECIFY /MACY11 OR /MECY11?
TXNE P3,IC.MCY!IC.MEY;OR OTHERWISE WANT MACY11-PACKING?
TFO T3,MCY ;YES
SETZ T4, ;OTHER HALF OF POTENTIAL WORDS
MOVDM T3,RAT ;SET MAIN ATTR RECORD ATTRIBUTES FIELD
;NOW START UP THE MAIN ATTRIBUTES MENU
DPOA19: MOVDII P1,M02,<DTY,ORG,RFM,RAT,BSZ> ;ALWAYS-SENT FIELDS
MOVD1 T2,FST ;*** GET REMOTE FILE SYSTEM
CAIN T2,$DVFF1 ;*** FCS-11?
TMZ P1,BSZ ;*** YES, WON'T ACCEPT BYTE SIZE FIELD!
;*** (IT ALSO WON'T SEND IT BACK TO US)
TFNE T3,LSA ;SENDING LSN?
TMO P1,FSZ ;YES, MUST ALSO SEND "LSN SIZE"
;SELECT BLOCKSIZE
DPOA20: MOVE T1,.IOFSC(IO) ;ADDRESS OF CURRENT FILE SPEC BLOCK
SKIPG T3,.FXBLS(T1) ;USER SPECIFY /BLOCKSIZE?
MOVE T3,.IOBLS(IO) ;NO, USE PROGRAM-SUPPLIED BLOCKSIZE (IF ANY)
MOVEM T3,.IOBLS(IO) ;SET BLOCKSIZE (BEST GUESS ANYWAY) FOR DPOA24
JUMPE T3,DPOA22 ;DON'T BOTHER WITH BLOCKSIZE IF NOTHING THERE
MOVD1M T3,BLS ;SET MAIN ATTR BLOCKSIZE FIELD
TMO P1,BLS ;AND FLAG IT IN THE MENU
;SELECT RECORD SIZE
DPOA22: SKIPG T3,.FXRSZ(T1) ;USER SPECIFY /RECSIZE?
SKIPLE T3,.IORSZ(IO) ;NO, GOT A PROGRAM-SPECIFIED RECORDSIZE?
JRST DPOA23 ;YES, TRUST IT
LDB T4,[POINTR .IOIOC(IO),IC.RFM] ;RECORD FORMAT
CAIN T4,.ICRF3 ;36PACK'ED WORDS?
MOVEI T3,<<<^D256-10>/^D09>*^D09> ;YES, WORDS INTO 256-BYTE RECORDS
DPOA23: MOVEM T3,.IORSZ(IO) ;SET RECORDSIZE (BEST GUESS ANYWAY)
JUMPE T3,DPOA24 ;DON'T BOTHER WITH RECORDSIZE IF NULL
MOVD1M T3,MRS ;YES, SET MAIN ATTR RECORD SIZE FIELD
TMO P1,MRS ;AND FLAG IT IN THE MENU
;SELECT FILE ALLOCATION
DPOA24: SKIPG T3,.FXEST(T1) ;USER SPECIFY /ALLOCATE OR /ESTIMATE?
JRST DPOA25 ;NO, TRY PROGRAM-SPECIFIED VALUES
ADDI T3,177 ;YES, ROUND UP AND
LSH T3,-7 ;TRUNCATE TO "BLOCKS" (SO TO SPEAK)
JRST DPOA26 ;SET ALLOCATION IN BLOCKS
DPOA25: SKIPG .IOBLS(IO) ;HAVE WE GOT A BLOCKING SIZE?
JRST DPOA30 ;NO, THEN CAN'T COMPUTE AN ALLOCATION SIZE
SKIPG T3,.IOALB(IO) ;GET PROGRAM-SPECIFIED ALLOCATION (BYTES)
MOVE T3,.IOLNB(IO) ;OR FALL BACK TO ACTUAL WRITTEN LENGTH (BYTES)
IDIV T3,.IOBLS(IO) ;CONVERT TO BLOCKS
CAILE T4,0 ;ANY REMAINDER?
ADDI T3,1 ;YEAH, ALLOW FOR PARTIAL BLOCK
DPOA26: JUMPE T3,DPOA30 ;SKIP ALLOCATION IF NULL
MOVD1M T3,ALQ ;SET MAIN ATTR ALLOCATION QUANTITY FIELD
TMO P1,ALQ ;AND FLAG IT IN THE MENU TOO
;SELECT FILE "OPTIONS"
DPOA30: MOVDII T3,FOP,<TEF> ;ASSUME TRUNCATE TO EOF ON CLOSE
SETZB T3,T4 ;*** OLD RSX IN THE FIELD DOESN'T LIKE TEF
MOVE T2,.FXCTL(T1) ;GET USER-SPECIFIED CONTROL FLAGS
TXNN T2,FX.ALC ;USER SPECIFY /ALLOCATE?
TXNE P4,IM.CBT ;OR PROGRAM SPECIFY "BEST TRY"
TFO T3,CBT ;YES, FLAG "CONTIGUOUS BEST TRY"
TXNN T2,FX.CTG ;USER SPECIFY /CONTIGUOUS?
TXNE P4,IM.CTG ;OR PROGRAM SPECIFY CONTIGUOUS?
TFO T3,CTG ;YES, FLAG "CONTIGUOUS"
TFNE T3,CTG ;CONTIGUOUS ALLOCATION REQUIRED?
TFZ T3,CBT ;YES, THEN NO "BEST TRY OK"
MOVE T2,.FXMOD(T1) ;FILE MODS
TXNN T2,FX.SUP ;/ERSUPERSEDE?
TFO T3,SUP ;NO, OK TO SUPERSEDE
MOVDM T3,FOP ;SET MAIN ATTR FILE ACCESS OPTIONS FIELD
TMO P1,FOP ;AND FLAG IT IN THE MENU TOO
MOVDM P1,M02 ;SET MAIN ATTTRIBUTES MENU FIELD
;ALLOCATION ATTIBUTES
DPOA50: SETZB P1,P2 ;INIT ALLOCATION ATTR MENU
MOVD T3,ALQ ;MAIN ATTR ALLOCATION QUANTITY
MOVDM T3,AAL ;COPY INTO ALLOC ATTR ALLOCATION QUANTITY
MOVD T3,M02 ;MAIN ATTR MENU
TMNN T3,ALQ ;AN ALLOCATION QUANTITY?
TMO P1,AAL ;YES
SETZB T3,T4 ;INIT FLAGS
MOVD T1,FOP ;MAIN ATTR FILE ACCESS OPTIONS
TFNE T1,CBT ;CONTIGUOUS BEST TRY?
TFO T3,ACB ;YES, MARK IN ALLOCATION OPTIONS
TFNE T1,CTG ;CONTIGUOUS ALLOCATION REQUIRED?
TFO T3,ACT ;YES, MARK IN ALLOCATION OPTIONS
MOVDM T3,ALP ;SET ALLOC ATTR ALLOCATION OPTIONS FIELD
TFNE T3,<ACB,ACT> ;ANYTHING IN OPTIONS?
TMO P1,ALP ;YES, MARK IT IN THE MENU
SKIPN T3,.I1LKP+.RBPOS(IO) ;ALLOCATION ADDRESS SUPPLIED?
JRST DPOA56 ;NO
MOVD1M T3,LOC ;SET ALLOC ATTR ALLOCATION ADDRESS FIELD
MOVDII T3,ALN,ALB ;THE ALIGN-TO-SPECIFIED-BLOCK BIT
MOVDM T3,ALN ;SET ALLOC ATTR ALIGNMENT CONTROL FIELD
TMO P1,<ALN,LOC> ;MARK FIELDS PRESENT IN MENU
DPOA56: MOVDM P1,M11 ;SET ALLOCATION ATTRIBUTES MENU
;DATE/TIME ATTRIBUTES
DPOA70: SETZB P1,P2 ;INITIALIZE MENU SELECTION
MOVE T4,.IODPV(IO) ;GET PROTOCOL VERSION
DPOA71: SKIPE T3,.IOCDT(IO) ;DO WE HAVE A CREATION DATE/TIME?
TMO P1,CDT ;YES, FLAG THE MENU ACCORDINGLY
MOVD1M T3,CDT ;SET DATE/TIME ATTR CREATION FIELD
SKIPE T3,.IOUDT(IO) ;DO WE HAVE AN UPDATE DATE/TIME?
TMO P1,UDT ;YES, FLAG THE MENU ACCORDINGLY
MOVD1M T3,UDT ;SET DATE/TIME ATTR UPDATE FIELD
SKIPE T3,.IOEDT(IO) ;DO WE HAVE AN EXPIRATION DATE/TIME?
TMO P1,EDT ;YES, FLAG THE MENU
MOVD1M T3,EDT ;SET DATE/TIME ATTR EXPIRATION FIELD
DPOA74: CAIGE T4,006000 ;VERSION 6.0 OR LATER PROTOCOL?
JRST DPOA79 ;NOPE, NOTHING MORE CAN BE SENT
SKIPE T3,.IOBDT(IO) ;DO WE HAVE A BACKUP DATE/TIME?
TMO P1,BDT ;YES, FLAG THE MENU
MOVD1M T3,BDT ;SET DATE/TIME ATTR BACKUP FIELD
SKIPE T3,.IOPDT(IO) ;GOT A PHYSICAL MEDIA CREATION DATE/TIME?
TMO P1,PDT ;YES, FLAG THE MENU
MOVD1M T3,PDT ;SET DATE/TIME ATTR PHYSICAL CREATE FIELD
SKIPE T3,.IOADT(IO) ;GOT AN ACCESS DATE/TIME?
TMO P1,ADT ;YES, FLAG THE MENU APPROPRIATELY
MOVD1M T3,ADT ;SET DATE/TIME ATTR ACCESS FIELD
DPOA79: MOVDM P1,M13 ;SET DATE/TIME ATTRIBUTES MENU
;PROTECTION ATTRIBUTES
;
;DPOA8? ASSUMES PROTECTION FLAGS FIELDS ARE ONLY ONE WORD LONG. AS THIS
;IS NOT GUARANTEED, AT LEAST CAUSE ASSEMBLY ERROR IF IT EVER CHANGES
IFN $DLPSY-1,<PRINTX ?PSY field not one word long in DPOA80>
IFN $DLPOW-1,<PRINTX ?POW field not one word long in DPOA80>
IFN $DLPGR-1,<PRINTX ?PGR field not one word long in DPOA80>
IFN $DLPWL-1,<PRINTX ?PWL field not one word long in DPOA80>
DPOA80: SETZB P1,P2 ;INITIAL MENU FLAGS
MOVE T2,.IOFSC(IO) ;ADDRESS OF CURRENT FILE SPEC BLOCK
LDB T3,[POINTR .FXMOM(T2),FX.PRO] ;DID USER SUPPLY /PROT:?
JUMPE T3,DPOA81 ;NO
LDB T3,[POINTR .FXMOD(T2),FX.PRO] ;YES, FETCH /PROTECTION VALUE
JRST DPOA82 ;AND SEND IT TO THE REMOTE
DPOA81: SKIPN T3,.IOPRT(IO) ;OR IS PROTECTION AVAILABLE VIA THE CDB?
JRST DPOA88 ;SKIP IF NO PROTECTION FIELD
DPOA82: LSHC T3,-6 ;REDUCE TO OWNER PROTECTION
ANDI T3,7 ;AND ONLY THE OWNER PROTECTION
MOVE T2,FPDPTO(T3) ;TRANSLATE TO DAPISH PROTECTION FLAGS
MOVDM T2,POW ;SET PROTECTION ATTR OWNER FIELD
LSHC T3,3 ;GET GROUP CODE
ANDI T3,7 ;AND ONLY THE GROUP CODE
MOVE T2,FPDPTB(T3) ;TRANSLATE TO DAPISH PROTECTION FLAGS
MOVDM T2,PGR ;SET PROTECTION ATTR GROUP FIELD
LSHC T3,3 ;GET WORLD ACCESS FIELD
ANDI T3,7 ;AND ONLY WORLD ACCESS FIELD
MOVE T2,FPDPTB(T3) ;TRANSLATE TO DAPISH PROTECTION FLAGS
MOVDM T2,PWL ;SET PROTECTION ATTR WORLD FIELD
TMO P1,<POW,PGR,PWL>;SELECT MENU FIELDS
DPOA88: MOVDM P1,M14 ;SET PROTECTION ATTRIBUTES MENU FIELD
;ALL DONE CONVERTING FILE ATTRIBUTES TO DAP ATTRIBUTES
DPOA99: JRST .POPJ1##
;FILE SPEC STRING TOO BIG
DPOAE1: MOVEI M0,$EFRFB ;FILE SPECIFICATION (STRING) TOO BIG
JRST .M0ERR## ;MARK ERROR AND RETURN
;FILE PASSWORD STRING TOO BIG
DPOAE2: MOVEI M0,$EFRSB ;GENERIC STRING TOO BIG ERROR
JRST .M0ERR## ;MARK ERROR AND RETURN
;DPOAA -- SETUP DAP ACCESS MESSAGE FROM [OUTPUT] FILE SPECIFICATION
;Call is:
;
; MOVX T1,<CDB>
; PUSHJ P,DPOAA
; error return
; normal return
;
;Where <CDB> is the address of the controlling I/O CDB.
;
;On error return the ACCESS message could not be translated (the file
;specification was too big, etc.). An error code is in M0.
;
;On normal return the ACCESS message is ready to be sent (XDDAP), excepting
;the access function field, which must be correctly set by the caller.
;
;DPOAA will clear out the ACCESS message data area (excepting the function
;field which is left untouched), then fill in the file specification and
;password fields from the CDB as set by SCWLD (output spec). If the
;remote supports file data checksumming then DPOAA will set the ACCESS
;options field to request same.
;
;DPOAA also generates the file componet strings (.IOFxx) such that if
;the remote doesn't return any name messages telling what actually
;happened, then at least the CDB can still say what we tried to do. DPRNM
;will update the file componet strings to reflect any received name
;messages.
;
;Uses T1 - T4.
ENTRY .DPOAA
INTERN DPOAA0, DPOAA1
.DPOAA: PUSHJ P,.SACIO## ;SETUP I/O CDB INDEX
DPOAA0: PUSHJ P,.SAVE4## ;SAVE THE P'S
DPOAA1: XMOVEI T1,DTYPO ;OUR OWN PRIVATE TYPER
PUSHJ P,.XTYPO## ;INTERCEPT AND SETUP TYPEOUT
;FIRST INITIALIZE THE ACCESS MESSAGE FIELDS
SETZB T1,T2 ;INITIAL (NO VALUE) VALUE
MOVDM T1,AFC ;CLEAR ACCESS FUNCTION FIELD
MOVDM T1,FAC ;CLEAR ACCESS OPERATIONS
MOVDM T1,SHR ;CLEAR SHARED OPERATIONS
MOVDM T1,ADS ;CLEAR ACCESS DISPLAY
;TRY FOR FILE DATA CHECKSUMMING
MOVDII T1,AOP,ACK ;ASSUME (HOPE) REMOTE SUPPORTS CHECKSUMMING
MOVD T3,CNF ;REMOTE'S CONFIGURATION FLAGS
TFNN T3,FCK ;DOES REMOTE SUPPORT FILE DATA CHECKSUMMING?
TFZ T1,ACK ;NO (BOO HISS), THEN DON'T REQUEST IT
MOVDM T1,AOP ;SET BASIC ACCESS OPTIONS
;CONVERT FILE SPECIFICATION INTO DAP ACCESS MESSAGE FILE SPEC FIELD
PUSHJ P,DPOFS1 ;GENERATE FILE COMPONET STRINGS (.IOFXX)
STOPCD <DPOFS failed in DPOAA1>
MOVE P3,[$DBFIL,,.IDFIL] ;7-BIT BYTE STUFFER PROTOTYPE
PUSHJ P,DP3P4 ;SETUP .IODP3/.IODP4 AS COUNTER/POINTER
STOPCD <DP3P4 failed in DPOAA>
PUSHJ P,DPGAAT ;GET FILE SPEC CONTROL FLAGS IN T2
PUSHJ P,TOCFS1 ;GENERATE FILE SPECIFICATION STRING
STOPCD <TOCFS1 failed in DPOAA>
DMOVE P3,.IODP3(IO) ;GET TERMINAL BYTE COUNTER/POINTER
AOBJP P3,DPOAE1 ;ERROR IF OVERFLOWED
MOVEI T1,0 ;A NULL BYTE
IDPB T1,P4 ;TO TERMINATE THE ASCIZ FILE SPEC STRING
;PASS ALONG ANY FILE PASSWORD TOO
MOVE P3,[$DBPSW,,.IDPSW] ;7-BIT BYTE STUFFER PROTOTYPE
PUSHJ P,DP3P4 ;SETUP BYTE COUNTER/POINTER
STOPCD <DP3P4 failed in DPOAA>
SKIPN T1,.IOFSC(IO) ;ADDRESS OF USER'S CURRENT FILE SPEC
STOPCD <No FSB for password in DPOAA>
MOVEI T1,.FXPSW(T1) ;ADDRESS OF ASSOCIATED PASSWORD STRING
PUSHJ P,.TSTRG## ;PUT PASSWORD STRING INTO DAP BLOCK
DMOVE P3,.IODP3(IO) ;GET TERMINAL BYTE COUNTER/POINTER
AOBJP P3,DPOAE2 ;ERROR IF OVERFLOWED
MOVEI T1,0 ;A NULL BYTE
IDPB T1,P4 ;TO TERMINATE THE ASCIZ PASSWORD STRING
;ACCESS MESSAGE ALL SET
JRST .POPJ1## ;SUCCESSFUL RETURN
;DPOFS - GENERATE "OUTPUT" FILE SPEC STRING FOR DAP ACCESS MESSAGE
;CALL IS:
;
; PUSHJ P,DPOFS
; error return
; normal return
;
;The error return is not exercised
;
;On normal return the "file specification" has been generated in terms
;of the file componet strings (.IOF?? - TOCFL/N can be used to generate
;the full file spec string).
;
;Uses T1, T2, T3, T4, P1, P2, P3, P4.
DPOFS1: XMOVEI T1,FILOTO ;OUR LITTLE TYPER
PUSHJ P,.XTYPO## ;DIRECT STRING OUTPUT
MOVE P1,.IOFSB(IO) ;ADDRESS OF "OUTPUT" FSB
MOVE P2,.FXFLD(P1) ;"OUTPUT" FIELDS FLAGS
MOVE P3,.IOSCD(IO) ;ADDRESS OF "INPUT" CDB
MOVE P4,.IOFSB(P3) ;ADDRESS OF "INPUT" FSB
;START WITH DEVICE NAME/STRING
DPOF20: MOVE T1,[POINT 7,.IOSDV(IO)] ;DEVICE STRING BLOCK BYTE POINTER
MOVEM T1,.IOXTO(IO) ;SETUP FOR FILOTO
TXNE P2,FX.WDV ;DEVICE WILDCARDS?
JRST DPOF22 ;YES
SKIPN T1,.FSDEV(P1) ;NO, USE NAME AS TYPED BY USER
JRST DPOF29 ;NO DEVICE SPECIFIED
JRST DPOF24 ;TYPE DEVICE NAME
DPOF22: MOVSI T1,'* ' ;FULL-WILD STRING
CAME T1,.FXDEV(P1) ;DID USER TYPE "*:"?
JRST DPOF26 ;NO, USE SCWILD'S RESULT
MOVE T1,.IOFDV(P3) ;YES, USE CORRESPONDING INPUT DEVICE NAME
DPOF24: PUSHJ P,.TSTRG## ;AND TYPE IT OUT
JRST DPOF29 ;CAP OFF DEVICE
DPOF26: MOVE T1,.I1OPN+.OPDEV(IO) ;SCWILD'S DEVICE NAME
PUSHJ P,.TSIXN## ;TYPE SIXBIT DEVICE NAME
DPOF29: PUSHJ P,FILOTZ ;TERMINATE ASCIZ STRING
SKIPE T1,.IOSDV(IO) ;WAS A DEVICE NAME GENERATED?
XMOVEI T1,.IOSDV(IO) ;YES, ADDRESS OF STRING
MOVEM T1,.IOFDV(IO) ;SET ADDRESS OF DEVICE STRING
;NOW DO DIRECTORY NAME
DPOF30: MOVE T1,[POINT 7,.IOSDR(IO)] ;DIRECTORY STRING BLOCK BYTE POINTER
MOVEM T1,.IOXTO(IO) ;SETUP FOR FILOTO
TXNE P2,FX.WDR ;DIRECTORY WILDCARDS?
JRST DPOF32 ;YES
SKIPN T1,.FSDIR(P1) ;NO, USE NAME AS TYPED BY USER
JRST DPOF39 ;NO DIRECTORY SPECIFIED
JRST DPOF34 ;TYPE DIRECTORY STRING
DPOF32: MOVSI T1,(ASCIZ\*\) ;FULL-WILD STRING
CAME T1,@.FSDIR(P1) ;DID USER TYPE "[*]"?
JRST DPOF36 ;NO, USE SCWILD'S RESULT
MOVE T1,.IOFDR(P3) ;YES, USE CORRESPONDING INPUT DIRECTORY NAME
DPOF34: PUSHJ P,.TSTRG## ;AND TYPE IT OUT
JRST DPOF39 ;CAP OFF DIRECTORY
DPOF36: MOVE T1,.I1LKP+.RBPPN(IO) ;SCWILD'S DIRECTORY NAME
PUSHJ P,.TDIRB## ;TYPE PATH BLOCK
MOVE T1,[POINT 7,.IOSDR(IO)] ;BYTE POINTER TO DIRECTORY STRING
MOVE T2,T1 ;COPY
IBP T1 ;SKIP THE LEADING "[" FROM .TDIRB
CAIA ;ENTER LOOP
IDPB M0,T2 ;STORE IT
ILDB M0,T1 ;DIRECTORY CHARACTER
JUMPN M0,.-2 ;LOOP FOR WHOLE STRING
DPB M0,T2 ;KRUMP ON TRAILING "]" FROM .TDIRB
DPOF39: PUSHJ P,FILOTZ ;TERMINATE ASCIZ STRING
SKIPE T1,.IOSDR(IO) ;WAS A DIRECTORY NAME GENERATED?
XMOVEI T1,.IOSDR(IO) ;YES, ADDRESS OF STRING
MOVEM T1,.IOFDR(IO) ;SET ADDRESS OF DIRECTORY STRING
;TYPE FILE NAME NEXT
DPOF40: MOVE T1,[POINT 7,.IOSNM(IO)] ;FILE NAME STRING BLOCK BYTE POINTER
MOVEM T1,.IOXTO(IO) ;SETUP FOR FILOTO
TXNE P2,FX.WNM ;NAME WILDCARDS?
JRST DPOF42 ;YES
SKIPN T1,.FSNAM(P1) ;NO, USE NAME AS TYPED BY USER
JRST DPOF49 ;NO NAME SPECIFIED
JRST DPOF44 ;TYPE FILE NAME
DPOF42: MOVSI T1,'* ' ;FULL-WILD STRING
CAME T1,.FXNAM(P1) ;DID USER TYPE "*"?
JRST DPOF46 ;NO, USE SCWILD'S RESULT
MOVE T1,.IOFNM(P3) ;YES, USE CORRESPONDING INPUT DEVICE NAME
DPOF44: PUSHJ P,.TSTRG## ;AND TYPE IT OUT
JRST DPOF49 ;CAP OFF NAME
DPOF46: MOVE T1,.I1LKP+.RBNAM(IO) ;SCWILD'S FILE NAME
PUSHJ P,.TSIXN## ;TYPE SIXBIT NAME
DPOF49: PUSHJ P,FILOTZ ;TERMINATE ASCIZ STRING
SKIPE T1,.IOSNM(IO) ;WAS A FILE NAME GENERATED?
XMOVEI T1,.IOSNM(IO) ;YES, ADDRESS OF STRING
MOVEM T1,.IOFNM(IO) ;SET ADDRESS OF FILE NAME STRING
;FOLLOW UP WITH THE FILE TYPE/EXTENSION
DPOF50: MOVE T1,[POINT 7,.IOSEX(IO)] ;EXTENSION STRING BLOCK BYTE POINTER
MOVEM T1,.IOXTO(IO) ;SETUP FOR FILOTO
TXNE P2,FX.WEX ;EXTENSION WILDCARDS?
JRST DPOF52 ;YES
SKIPN T1,.FSEXT(P1) ;NO, USE NAME AS TYPED BY USER
JRST DPOF59 ;NO EXTENSION SPECIFIED
JRST DPOF54 ;TYPE EXTENSION
DPOF52: HRLZI T1,'* ' ;FULL-WILD STRING
CAME T1,.FXEXT(P1) ;DID USER TYPE ".*"?
JRST DPOF56 ;NO, USE SCWILD'S RESULT
MOVE T1,.IOFEX(P3) ;YES, USE CORRESPONDING INPUT EXTENSION
DPOF54: PUSHJ P,.TSTRG## ;AND TYPE IT OUT
JRST DPOF59 ;CAP OFF EXTENSION
DPOF56: HLLZ T1,.I1LKP+.RBEXT(IO) ;SCWILD'S FILE EXTENSION
PUSHJ P,.TSIXN## ;TYPE SIXBIT DEVICE NAME
DPOF59: PUSHJ P,FILOTZ ;TERMINATE ASCIZ STRING
SKIPE T1,.IOSEX(IO) ;WAS A EXTENSION NAME GENERATED?
XMOVEI T1,.IOSEX(IO) ;YES, ADDRESS OF STRING
MOVEM T1,.IOFEX(IO) ;SET ADDRESS OF EXTENSION STRING
;FINISH OFF WITH THE GENERATION
DPOF60: MOVE T1,[POINT 7,.IOSGN(IO)] ;GENERATION STRING BLOCK BYTE POINTER
MOVEM T1,.IOXTO(IO) ;SETUP FOR FILOTO
TXNE P2,FX.WGN ;GENERATION WILDCARDS?
JRST DPOF62 ;YES
SKIPN T1,.FSGEN(P1) ;NO, USE GENERATION AS TYPED BY USER
JRST DPOF69 ;NO GENERATION SPECIFIED
JRST DPOF64 ;TYPE GENERATION STRING
DPOF62: MOVSI T1,'* ' ;FULL-WILD STRING
CAME T1,.FXGEN(P1) ;DID USER TYPE ".*"?
JRST DPOF66 ;NO, USE SCWILD'S RESULT
MOVE T1,.IOFGN(P3) ;YES, USE CORRESPONDING INPUT GENERATION
DPOF64: PUSHJ P,.TSTRG## ;AND TYPE IT OUT
JRST DPOF69 ;CAP OFF GENERATION
DPOF66: SKIPE T1,.I1GEN(IO) ;LOOK FOR A GENERATION
PUSHJ P,.TDECW## ;TYPE OUT DECIMAL GENERATION
DPOF69: PUSHJ P,FILOTZ ;TERMINATE ASCIZ STRING
SKIPE T1,.IOSGN(IO) ;WAS A GENERATION NAME GENERATED?
XMOVEI T1,.IOSGN(IO) ;YES, ADDRESS OF STRING
MOVEM T1,.IOFGN(IO) ;SET ADDRESS OF GENERATION STRING
;ALL DONE WITH "OUTPUT" FILE SPECIFICATION COMPONETS
DPOF70: JRST .POPJ1## ;SUCCESSFUL RETURN
;DPOTN - BUILD TERTIARY NAME COMPONETS FOR RENAME
;Call is:
;
; PUSHJ P,DPOTN
; error return
; normal return
;
;DPOTN is used to build the DAP NAME message containing the full file
;specification to be used in a RENAME operation (presumably via the
;version 7.0 and later ACCOMP(RENAME) sequence. The name is generated
;in a manner analguous to DPOAA, only the controlling spec is the .IOCU3
;"tertiary" file spec block, and the "input" and "output" CDBs are one
;and the same.
;
;The error return is taken if the file spec cannot be built (e.g., the
;file spec string is too big, etc.)
;
;On normal return the NAME message is ready to be shipped, containing
;the tertiary (RENAME) file spec a la .IOCU3 and .SCWLD's results.
;The tertiary string componets (.IOF3?) are also setup.
;
;Uses T1, T2, T3, T4.
ENTRY .DPOTN
INTERN DPOTN0, DPOTN1
.DPOTN: PUSHJ P,.SACIO## ;SWITCH TO I/O CONTEXT
DPOTN0: PUSHJ P,.SAVE4## ;PROTECT THE P'S
DPOTN1: XMOVEI T1,DTYPO ;CHARACTER "TYPEOUT" ROUTINE
PUSHJ P,.XTYPO## ;INTERCEPT AND SPECIFY CHARACTER HANDLING
;SPECIFY NAME TYPE
MOVDII T1,NTY,NFS ;WE ARE BUILDING FULL FILE SPEC
MOVDM T1,NTY ;SET IN NAME TYPE FIELD
;CONVERT FILE SPECIFICATION INTO DAP NAME MESSAGE FIELD
PUSHJ P,DPOTS1 ;GENERATE FILE COMPONET STRINGS (.IOF3?)
STOPCD <DPOTS failed in DPOTN1>
MOVE P3,[$DBNMS,,.IDNMS] ;7-BIT BYTE PROTOTYPE STUFFER
PUSHJ P,DP3P4 ;SETUP .IODP3/.IODP4 AS COUNTER/POINTER
STOPCD <DP3P4 failed in DPOTN1>
PUSHJ P,DPGAAT ;GET FILE SPEC CONTROL FLAGS IN T2
TXZ T2,FX.UND!FX.UDV;IGNORE/SUPPRESS NODE AND DEVICE FIELDS
PUSHJ P,TOTFS1 ;GENERATE TERTIARY FILE SPEC STRING
STOPCD <TOTFS1 failed in DPOTN1>
DMOVE P3,.IODP3(IO) ;GET FINAL COUNTER/POINTER
AOBJP P3,DPOAE1 ;ERROR IF OVERFLOWED STRING BUFFER
MOVEI T1,0 ;A TERMINATING <NUL>
IDPB T1,P4 ;TO ASCIZIZE THE FILE SPEC STRING
;NAME MESSAGE COMPLETE
JRST .POPJ1## ;SUCCESSFUL RETURN READY FOR XDDAP
;DPOTS - GENERATE TERTIARY "OUTPUT" FILE SPEC STRING FOR DAP NAME MESSAGE
;CALL IS:
;
; PUSHJ P,DPOTS
; error return
; normal return
;
;The error return is not exercised
;
;On normal return the "file specification" has been generated in terms
;of the tertiary file componet strings (.IOF3?).
;
;Uses T1, T2, T3, T4, P1, P2, P3, P4.
DPOTS1: XMOVEI T1,FILOTO ;OUR LITTLE TYPER
PUSHJ P,.XTYPO## ;DIRECT STRING OUTPUT
MOVE P1,.IOCU3(IO) ;ADDRESS OF "OUTPUT" FSB
MOVE P2,.FXFLD(P1) ;"OUTPUT" FIELDS FLAGS
MOVE P4,.IOFSB(IO) ;ADDRESS OF "INPUT" FSB
;START WITH DEVICE NAME/STRING
DPOT20: MOVE T1,[POINT 7,.IOS3V(IO)] ;DEVICE STRING BLOCK BYTE POINTER
MOVEM T1,.IOXTO(IO) ;SETUP FOR FILOTO
TXNE P2,FX.WDV ;DEVICE WILDCARDS?
JRST DPOT22 ;YES
SKIPN T1,.FSDEV(P1) ;NO, USE NAME AS TYPED BY USER
JRST DPOT29 ;NO DEVICE SPECIFIED
JRST DPOT24 ;TYPE DEVICE NAME
DPOT22: MOVSI T1,'* ' ;FULL-WILD STRING
CAME T1,.FXDEV(P1) ;DID USER TYPE "*:"?
JRST DPOT26 ;NO, USE SCWILD'S RESULT
MOVE T1,.IOFDV(IO) ;YES, USE CORRESPONDING INPUT DEVICE NAME
DPOT24: PUSHJ P,.TSTRG## ;AND TYPE IT OUT
JRST DPOT29 ;CAP OFF DEVICE
DPOT26: MOVE T1,.I1OP3+.OPDEV(IO) ;SCWILD'S DEVICE NAME
PUSHJ P,.TSIXN## ;TYPE SIXBIT DEVICE NAME
DPOT29: PUSHJ P,FILOTZ ;TERMINATE ASCIZ STRING
SKIPE T1,.IOS3V(IO) ;WAS A DEVICE NAME GENERATED?
XMOVEI T1,.IOS3V(IO) ;YES, ADDRESS OF STRING
MOVEM T1,.IOF3V(IO) ;SET ADDRESS OF DEVICE STRING
;NOW DO DIRECTORY NAME
DPOT30: MOVE T1,[POINT 7,.IOS3R(IO)] ;DIRECTORY STRING BLOCK BYTE POINTER
MOVEM T1,.IOXTO(IO) ;SETUP FOR FILOTO
TXNE P2,FX.WDR ;DIRECTORY WILDCARDS?
JRST DPOT32 ;YES
SKIPN T1,.FSDIR(P1) ;NO, USE NAME AS TYPED BY USER
JRST DPOT39 ;NO DIRECTORY SPECIFIED
JRST DPOT34 ;TYPE DIRECTORY STRING
DPOT32: MOVSI T1,(ASCIZ\*\) ;FULL-WILD STRING
CAME T1,@.FSDIR(P1) ;DID USER TYPE "[*]"?
JRST DPOT36 ;NO, USE SCWILD'S RESULT
MOVE T1,.IOFDR(IO) ;YES, USE CORRESPONDING INPUT DIRECTORY NAME
DPOT34: PUSHJ P,.TSTRG## ;AND TYPE IT OUT
JRST DPOT39 ;CAP OFF DIRECTORY
DPOT36: MOVE T1,.I1LK3+.RBPPN(IO) ;SCWILD'S DIRECTORY NAME
PUSHJ P,.TDIRB## ;TYPE PATH BLOCK
MOVE T1,[POINT 7,.IOS3R(IO)] ;BYTE POINTER TO DIRECTORY STRING
MOVE T2,T1 ;COPY
IBP T1 ;SKIP THE LEADING "[" FROM .TDIRB
CAIA ;ENTER LOOP
IDPB M0,T2 ;STORE IT
ILDB M0,T1 ;DIRECTORY CHARACTER
JUMPN M0,.-2 ;LOOP FOR WHOLE STRING
DPB M0,T2 ;KRUMP ON TRAILING "]" FROM .TDIRB
DPOT39: PUSHJ P,FILOTZ ;TERMINATE ASCIZ STRING
SKIPE T1,.IOS3R(IO) ;WAS A DIRECTORY NAME GENERATED?
XMOVEI T1,.IOS3R(IO) ;YES, ADDRESS OF STRING
MOVEM T1,.IOF3R(IO) ;SET ADDRESS OF DIRECTORY STRING
;TYPE FILE NAME NEXT
DPOT40: MOVE T1,[POINT 7,.IOS3M(IO)] ;FILE NAME STRING BLOCK BYTE POINTER
MOVEM T1,.IOXTO(IO) ;SETUP FOR FILOTO
TXNE P2,FX.WNM ;NAME WILDCARDS?
JRST DPOT42 ;YES
SKIPN T1,.FSNAM(P1) ;NO, USE NAME AS TYPED BY USER
JRST DPOT49 ;NO NAME SPECIFIED
JRST DPOT44 ;TYPE FILE NAME
DPOT42: MOVSI T1,'* ' ;FULL-WILD STRING
CAME T1,.FXNAM(P1) ;DID USER TYPE "*"?
JRST DPOT46 ;NO, USE SCWILD'S RESULT
MOVE T1,.IOFNM(IO) ;YES, USE CORRESPONDING INPUT DEVICE NAME
DPOT44: PUSHJ P,.TSTRG## ;AND TYPE IT OUT
JRST DPOT49 ;CAP OFF NAME
DPOT46: MOVE T1,.I1LK3+.RBNAM(IO) ;SCWILD'S FILE NAME
PUSHJ P,.TSIXN## ;TYPE SIXBIT NAME
DPOT49: PUSHJ P,FILOTZ ;TERMINATE ASCIZ STRING
SKIPE T1,.IOS3M(IO) ;WAS A FILE NAME GENERATED?
XMOVEI T1,.IOS3M(IO) ;YES, ADDRESS OF STRING
MOVEM T1,.IOF3M(IO) ;SET ADDRESS OF FILE NAME STRING
;FOLLOW UP WITH THE FILE TYPE/EXTENSION
DPOT50: MOVE T1,[POINT 7,.IOS3X(IO)] ;EXTENSION STRING BLOCK BYTE POINTER
MOVEM T1,.IOXTO(IO) ;SETUP FOR FILOTO
TXNE P2,FX.WEX ;EXTENSION WILDCARDS?
JRST DPOT52 ;YES
SKIPN T1,.FSEXT(P1) ;NO, USE NAME AS TYPED BY USER
JRST DPOT59 ;NO EXTENSION SPECIFIED
JRST DPOT54 ;TYPE EXTENSION
DPOT52: HRLZI T1,'* ' ;FULL-WILD STRING
CAME T1,.FXEXT(P1) ;DID USER TYPE ".*"?
JRST DPOT56 ;NO, USE SCWILD'S RESULT
MOVE T1,.IOFEX(IO) ;YES, USE CORRESPONDING INPUT EXTENSION
DPOT54: PUSHJ P,.TSTRG## ;AND TYPE IT OUT
JRST DPOT59 ;CAP OFF EXTENSION
DPOT56: HLLZ T1,.I1LK3+.RBEXT(IO) ;SCWILD'S FILE EXTENSION
PUSHJ P,.TSIXN## ;TYPE SIXBIT DEVICE NAME
DPOT59: PUSHJ P,FILOTZ ;TERMINATE ASCIZ STRING
SKIPE T1,.IOS3X(IO) ;WAS A EXTENSION NAME GENERATED?
XMOVEI T1,.IOS3X(IO) ;YES, ADDRESS OF STRING
MOVEM T1,.IOF3X(IO) ;SET ADDRESS OF EXTENSION STRING
;FINISH OFF WITH THE GENERATION
DPOT60: MOVE T1,[POINT 7,.IOS3N(IO)] ;GENERATION STRING BLOCK BYTE POINTER
MOVEM T1,.IOXTO(IO) ;SETUP FOR FILOTO
TXNE P2,FX.WGN ;GENERATION WILDCARDS?
JRST DPOT62 ;YES
SKIPN T1,.FSGEN(P1) ;NO, USE GENERATION AS TYPED BY USER
JRST DPOT69 ;NO GENERATION SPECIFIED
JRST DPOT64 ;TYPE GENERATION STRING
DPOT62: MOVSI T1,'* ' ;FULL-WILD STRING
CAME T1,.FXGEN(P1) ;DID USER TYPE ".*"?
JRST DPOT66 ;NO, USE SCWILD'S RESULT
MOVE T1,.IOFGN(IO) ;YES, USE CORRESPONDING INPUT GENERATION
DPOT64: PUSHJ P,.TSTRG## ;AND TYPE IT OUT
JRST DPOT69 ;CAP OFF GENERATION
DPOT66: SKIPE T1,.I1GE3(IO) ;LOOK FOR A GENERATION
PUSHJ P,.TDECW## ;TYPE OUT DECIMAL GENERATION
DPOT69: PUSHJ P,FILOTZ ;TERMINATE ASCIZ STRING
SKIPE T1,.IOS3N(IO) ;WAS A GENERATION NAME GENERATED?
XMOVEI T1,.IOS3N(IO) ;YES, ADDRESS OF STRING
MOVEM T1,.IOF3N(IO) ;SET ADDRESS OF GENERATION STRING
;ALL DONE WITH "OUTPUT" FILE SPECIFICATION COMPONETS
DPOT70: JRST .POPJ1## ;SUCCESSFUL RETURN
;DPDCH - TRANSLATE DAP DEVICE CHARACTERISTICS INTO FILE CHARACTERISTICS
;CALL IS:
;
; PUSHJ P,DPDCH
; error return
; normal return
;
;The error return is not utilized.
;
;On normal return, the DAP device characteristics (predominantly the "DEV"
;field of the main attributes) are translated into the I/O CDB file/device
;characteristics (.IODCH/IC.xxx), returned in T2.
;
;Uses T1, T2, T3.
ENTRY .DPDCH
INTERN DPDCH0, DPDCH1
.DPDCH: PUSHJ P,.SACIO## ;SWITCH TO I/O CONTEXT
DPDCH0: ;DON'T USE THE P'S HERE
DPDCH1: SETZ T1, ;INITIALLY NO FLAGS
MOVD T2,DEV ;GET MAIN ATTRIBUTES DEVICE CHARACTERISTICS
TFNE T2,REC ;"RECORD-ORIENTED"?
TXO T1,IC.REC ;YES
TFNE T2,CCL ;CARRIAGE-CONTROL?
TXO T1,IC.CCL ;YES
TFNE T2,TRM ;TERMINAL?
TXO T1,IC.TRM ;YES
TFNE T2,MDI ;MULTIPLE DIRECTORIES?
TXO T1,IC.MDI ;YES
TFNE T2,SDI ;SINGLE-DIRECTORY?
TXO T1,IC.SDI ;YES
TFNE T2,SQD ;SEQUENTIAL BLOCK ORIENTED?
TXO T1,IC.SQD ;YES
TFNE T2,NUL ;NUL DEVICE?
TXO T1,IC.NUL ;YES
TFNE T2,FOD ;FILE-ORIENTED DEVICE?
TXO T1,IC.FOD ;YES
TFNE T2,DSH ;SHARABLE?
TXO T1,IC.DSH ;YES
TFNE T2,SPL ;SPOOLED DEVICE?
TXO T1,IC.SPL ;YES
TFNE T2,MNT ;MOUNTED?
TXO T1,IC.MNT ;YES
TFNE T2,DMT ;MARKED FOR DISMOUNT?
TXO T1,IC.DMT ;YES
TFNE T2,ALL ;DEVICE ALLOCATED?
TXO T1,IC.ALL ;YES
TFNE T2,IDV ;CAN DEVICE DO INPUT?
TXO T1,IC.IDV ;YES
TFNE T2,ODV ;CAN DEVICE DO OUTPUT?
TXO T1,IC.ODV ;YES
TFNE T2,SWL ;IS DEVICE SOWTWARE-WRITE-LOCKED?
TXO T1,IC.SWL ;YES
TFNE T2,AVL ;IS DEVICE AVAILABLE?
TXO T1,IC.AVL ;YES
TFNE T2,ELG ;ERROR-LOGGING ENABLED?
TXO T1,IC.ELG ;YES
TFNE T2,MBX ;A MAILBOX?
TXO T1,IC.MBX ;YES
TFNE T2,RTM ;REAL-TIME DEVICE?
TXO T1,IC.RTM ;YES
TFNE T2,RAD ;RANDOM-ACCESS?
TXO T1,IC.RAD ;YES
TFNE T2,DRC ;READ-CHECKING ENABLED?
TXO T1,IC.DRC ;YES
TFNE T2,DWC ;WRITE-CHECKING ENABLED?
TXO T1,IC.DWC ;YES
TFNE T2,FRN ;FOREIGN DEVICE?
TXO T1,IC.FRN ;YES
TFNE T2,NDV ;NETWORK DEVICE?
TXO T1,IC.NDV ;YES
TFNE T2,GDV ;GENERIC DEVICE?
TXO T1,IC.GDV ;YES
MOVD T2,ALP ;GET ALLOCATION OPTIONS (IF ANY)
TFNE T2,ACT ;ALLOCATED CONTIGUOUSLY?
TXO T1,IC.CTG ;YES
MOVE T2,T1 ;POSITION MASK IN T2
JRST .POPJ1## ;RETURN WITH IC.??? FLAGS IN T2
;DPSII - DAP INPUT INITIALIZATION - SEND CONTROL(CONNECT/GET)
;CALL IS:
;
; PUSHJ P,DPSII
; error return
; normal return
;
;On error return the input data stream could not be started up (M0
;contains an error code).
;
;On normal return the network stream is ready for DAP DATA messages to
;be received from the remote.
;
;Uses T1 - T4
ENTRY .DPSII
INTERN DPSII0, DPSII1
.DPSII: PUSHJ P,.SACIO## ;SETUP I/O CDB ADDRESS
DPSII0: PUSHJ P,.SAVE4## ;SAVE THE P'S
DPSII1:;SETZM .IODIS(IO) ;SELECT STREAM ID "0"
;SETUP CONTROL MESSAGE FOR SEQUENTIAL FILE TRANSFER
MOVEI T3,$DVCSF ;SEQUENTIAL FILE ACCESS MODE
MOVD1M T3,RAC ;SET RECORD ACCESS CONTROL FIELD
SETZB T3,T4 ;CLEAR FLAGS
MOVDM T3,ROP ;SET RECORD-LEVEL OPERATIONS FIELD
SETZB T3,T4 ;CLEAR FLAGS
MOVDM T3,CDS ;SET CONTROL-DISPLAY-REQUESTED FIELD
; MOVDII T3,M04,<RAC,ROP,CDS> ;CONTROL MENU FLAGS
MOVDII T3,M04,<RAC,ROP>;CONTROL MENU FLAGS (VAX HATES CDS)
MOVDM T3,M04 ;SET CONTROL MENU FIELD
MOVEI T3,$DVCON ;CONTROL(CONNECT) INIT DATA STREAM FUNCTION
MOVD1M T3,CFC ;SET CONTROL FUNCTION FIELD
MOVEI T2,$DHCTL ;CONTROL MESSAGE CODE
PUSHJ P,XDDAP1## ;SEND A CONTROL(CONNECT) MESSAGE
CAIA ;HMMM
JRST DPSI20 ;SET FOR DATA TRANSMISSION
STOPCD <Control(connect) xmit failed>
;INDICATE DESIRE TO RECEIVE DATA
DPSI20: MOVD T3,M04 ;RETRIEVE COPY OF CONTROL MENU
TMZ T3,CDS ;DON'T NEED DISPLAY-REQUESTED FIELD ANYMORE
; (BUT KEEP RAC/ROP OUT OF PARANOIA)
MOVDM T3,M04 ;SET SHRUNKEN CONTROL MENU
MOVEI T3,$DVCGT ;CONTROL(GET) READ FUNCTION
MOVD1M T3,CFC ;SET CONTROL FUNCTION FIELD
MOVEI T2,$DHCTL ;CONTROL MESSAGE CODE
PUSHJ P,XDDAP1## ;SEND A CONTROL(GET) MESSAGE
CAIA ;HMMM
JRST DPSI30 ;GET REMOTE'S ACKNOWLEDGEMENT
STOPCD <Control(get) xmit failed>
;WAIT FOR REMOTE TO ACKNOWLEDGE OUR DESIRE TO READ DATA
DPSI30: PUSHJ P,XDFLS1## ;ENSURE MESSAGES SENT TO REMOTE
POPJ P, ;OOPS
DPSI40: PUSHJ P,RDMSG1## ;GET A DAP MESSAGE CODE
POPJ P, ;NETWORK MUST HAVE DIED
JSP T4,.CDISP## ;DISPATCH ON RECEIVED MESSAGE TYPE
DPSI42,,$DHSTS ;STATUS, PROBABLY AN ERROR
DPSI49,,$DHACK ;ACKNOWLEDGEMENT
0 ;NO MORE
JRST .RDEOS## ;MESSAGE OUT OF SEQUENCE
;STATUS RECEIVED, CHECK IT OUT
DPSI42: PUSHJ P,RDSTS1## ;READ IN THE STATUS MESSAGE
POPJ P, ;OOPS
CAIE M0,$EGOIP ;"OPERATION IN PROGRESS"?
CAIN M0,$EGAOK ;"A-OK"?
JRST DPSI40 ;YES (DUH?) TRY FOR THE ACK AGAIN
POPJ P, ;PROPAGATE ERROR
;ACKNOWLEDGEMENT RECEIVED
DPSI49: PUSHJ P,RDDAP1## ;EAT REST OF ACK MESSAGE
POPJ P, ;NETWORK DIED
MOVX T1,IO.DCC ;THE DAP-CONTROL(CONNECT) BIT
IORM T1,.IOCCF(IO) ;SET IN THE CDB
;OPTIMIZE BUFFER ALLOCATION FOR INPUT
SETO T2, ;NO LINK QUOTA DIDDLING
MOVEI T3,^D75 ;75% OF QUOTA FOR INPUT OPERATIONS
;*** PUSHJ P,NTNSQ1## ;BEND LINK QUOTAS TOWARD INPUT
JFCL ;HO HUM
JRST .POPJ1## ;ALL SET FOR I/O (READ) OPERATIONS
;DPSOI - DAP OUTPUT INITIALIZATION - SEND CONTROL(CONNECT/PUT)
;CALL IS:
;
; PUSHJ P,DPSOI
; error return
; normal return
;
;On error return the output data stream could not be started up (M0
;contains an error code).
;
;On normal return the network stream is ready for DAP DATA messages to
;be transmitted to the remote.
;
;Uses T1 - T4
ENTRY .DPSOI
INTERN DPSOI0, DPSOI1
.DPSOI: PUSHJ P,.SACIO## ;SETUP I/O CDB ADDRESS
DPSOI0: PUSHJ P,.SAVE4## ;SAVE THE P'S
DPSOI1:;SETZM .IODOS(IO) ;SELECT STREAM ID "0"
;SETUP CONTROL MESSAGE FOR SEQUENTIAL FILE TRANSFER
MOVEI T3,$DVCSF ;SEQUENTIAL FILE ACCESS MODE
MOVD1M T3,RAC ;SET RECORD ACCESS CONTROL FIELD
SETZB T3,T4 ;CLEAR FLAGS
MOVE T1,.IOFOP(IO) ;RETRIEVE FILE OPERATION
CAIN T1,.IFAPP ;APPEND FUNCTION?
TFO T3,EOF ;YES, SET "POSITION TO EOF"
MOVDM T3,ROP ;SET RECORD-LEVEL OPERATIONS FIELD
SETZB T3,T4 ;CLEAR FLAGS
MOVDM T3,CDS ;SET CONTROL-DISPLAY-REQUESTED FIELD
; MOVDII T3,M04,<RAC,ROP,CDS> ;CONTROL MENU FLAGS
MOVDII T3,M04,<RAC,ROP>;CONTROL MENU FLAGS (VAX HATES CDS)
MOVDM T3,M04 ;SET CONTROL MENU FIELD
MOVEI T3,$DVCON ;CONTROL(CONNECT) INIT DATA STREAM FUNCTION
MOVD1M T3,CFC ;SET CONTROL FUNCTION FIELD
MOVEI T2,$DHCTL ;CONTROL MESSAGE CODE
PUSHJ P,XDDAP1## ;SEND A CONTROL(CONNECT) MESSAGE
CAIA ;HMMM
JRST DPSO20 ;SET FOR DATA TRANSMISSION
STOPCD <Control(connect) xmit failed>
;INDICATE DESIRE TO TRANSMIT DATA
DPSO20: MOVD T3,M04 ;RETRIEVE COPY OF CONTROL MENU
TMZ T3,CDS ;DON'T NEED DISPLAY-REQUESTED FIELD ANYMORE
; (BUT KEEP RAC/ROP OUT OF PARANOIA)
MOVDM T3,M04 ;SET SHRUNKEN CONTROL MENU
MOVEI T3,$DVCPT ;CONTROL(PUT) WRITE FUNCTION
MOVD1M T3,CFC ;SET CONTROL FUNCTION FIELD
MOVEI T2,$DHCTL ;CONTROL MESSAGE CODE
PUSHJ P,XDDAP1## ;SEND A CONTROL(PUT) MESSAGE
CAIA ;HMMM
JRST DPSO30 ;GET REMOTE'S ACKNOWLEDGEMENT
STOPCD <Control(put) xmit failed>
;WAIT FOR REMOTE TO ACKNOWLEDGE OUR DESIRE TO WRITE DATA
DPSO30: PUSHJ P,XDFLS1## ;ENSURE MESSAGES SENT TO REMOTE
POPJ P, ;OOPS
DPSO40: PUSHJ P,RDMSG1## ;GET A DAP MESSAGE CODE
POPJ P, ;NETWORK MUST HAVE DIED
JSP T4,.CDISP## ;DISPATCH ON RECEIVED MESSAGE TYPE
DPSO42,,$DHSTS ;STATUS, PROBABLY AN ERROR
DPSO49,,$DHACK ;ACKNOWLEDGEMENT
0 ;NO MORE
JRST .RDEOS## ;MESSAGE OUT OF SEQUENCE
;STATUS RECEIVED, CHECK IT OUT
DPSO42: PUSHJ P,RDSTS1## ;READ IN THE STATUS MESSAGE
POPJ P, ;OOPS
CAIE M0,$EGOIP ;"OPERATION IN PROGRESS"?
CAIN M0,$EGAOK ;"A-OK"?
JRST DPSO40 ;YES (DUH?) TRY FOR THE ACK AGAIN
POPJ P, ;PROPAGATE ERROR
;ACKNOWLEDGEMENT RECEIVED
DPSO49: PUSHJ P,RDDAP1## ;EAT REST OF ACK MESSAGE
POPJ P, ;NETWORK DIED
MOVX T1,IO.DCC ;THE DAP-CONTROL(CONNECT) BIT
IORM T1,.IOCCF(IO) ;SET IN THE CDB
;OPTIMIZE QUOTA ALLOCATION FOR OUTPUT
SETO T2, ;NO QUOTA DIDDLING
MOVEI T3,^D25 ;75% OF BUFFER QUOTA FOR OUTPUT
;*** PUSHJ P,NTNSQ1## ;BEND BUFFER ALLOCATION TOWARDS OUTPUT
JFCL ;HO HUM
JRST .POPJ1## ;ALL SET FOR I/O (WRITE) OPERATIONS
;DP3P4 - SETUP .IODP3/.IODP4 AS BYTE COUNT/BYTE POINTER
;CALL IS:
;
; MOVX P3,<7BP>
; PUSHJ P,DP3P4
; error return
; normal return
;
;Where <7BP> is the prototype 7-bit format pointer in the form count,,offset
;where "count" is the maximum byte count of the string and "offset" is the
;byte string offset into the .IODAP area within the I/O CDB.
;
;On error return the specified index was outside of all possible CDB offsets
;
;On normal return .IODP3 will contain an AOBJN counter of the form -max,,0 and
;.IODP4 will contain the byte pointer for IDPBs.
;
;Preserves all acs
DP3P4: HRRZ P4,P3 ;WORD OFFSET INTO THE CDB
ANDCMI P3,-1 ;MAXIMUM COUNT,,0
CAILE P4,.IOMAX ;WITHIN RANGE?
STOPCD <DAP ASCII string index outside of CDB>
HRLI P4,(POINT 7,(IO)) ;CONVERT TO 7-BIT BYTE POINTER
TLC P3,-1 ;MAKE COUNT INTO AOBJN POINTER
DMOVEM P3,.IODP3(IO) ;SETUP COUNTER AND POINTER FOR DTYPO
; (THIS WAY THE RH(.IODP3) IS AN UP-TO-DATE
; COUNT OF BYTES ACTUALLY STORED,
; WHILE LH IS NEGATIVE IF NOT OVERFLOWED)
JRST .POPJ1## ;READY FOR CALLS TO DTYPO
;DTYPO - HELPER FOR DP???
DTYPO: EXCH P3,.IODP3(IO) ;GET COUNTER WHERE IT IS ACCESSIBLE
AOBJP P3,.+2 ;ROOM FOR ANOTHER 7-BIT BYTE?
IDPB T1,.IODP4(IO) ;YES
EXCH P3,.IODP3(IO) ;RESTORE CALLER'S P3
POPJ P, ;RETURN
;DPGOST - GET DAP OPERATING SYSTEM TYPE
DPGOST: MOVD1 T2,OST ;REMOTE OPERATING SYSTEM TYPE
CAIG T2,$DVOMX ;WITHIN LIMITS THAT WE KNOW OF?
JRST .POPJ1## ;YES, ALL SET, RETURN HAPPILY
OUTSTR [ASCIZ\[Unknown remote operating system, assuming RSX-11M]
\] ;TELL USER OF WOES
MOVEI T2,$DVORM ;DEFAULT TO RSX-11M
POPJ P, ;AND THAT IS THAT
;DPGFST - GET DAP FILE SYSTEM TYPE
DPGFST: MOVD1 T2,FST ;REMOTE FILE SYSTEM TYPE
CAIG T2,$DVFMX ;WITHIN LIMITS THAT WE KNOW OF?
JRST .POPJ1## ;YES, ALL SET, RETURN HAPPILY
OUTSTR [ASCIZ\[Unknown remote file system type, assuming RMS-11]
\] ;TELL USER OF WOES
MOVEI T2,$DVF11 ;DEFAULT TO RSX-11 RMS-11
POPJ P, ;AND THAT IS THAT
;DPGAAT - GET DAP FILE SPEC CONTROL FLAGS BASED ON FILE SYSTEM TYPE
DPGAAT: PUSHJ P,DPGFST ;GET FILE SYSTEM TYPE
JFCL ;IGNORE ERRORS
MOVE T2,DPWAAT(T2) ;FETCH FLAGS
POPJ P, ;RETURN
;FILE-SYSTEM-SPECIFIC FILE SPEC CONTROL FLAGS
FXFWAA==FX.UDV!FX.UDR!FX.UNM!FX.UEX
DPWAAT: FXFWAA ;00 - UNKNOWN
FXFWAA!FX.UGN!FX.SGN ;01 - RMS-11
FXFWAA!FX.UGN ;02 - RMS-20
FXFWAA!FX.UGN!FX.SND!FX.SGN ;03 - RMS-32
FXFWAA!FX.UGN!FX.SGN ;04 - FCS-11
FXFWAA ;05 - RT-11
FXFWAA ;06 - NO FILE SYSTEM
FXFWAA!FX.UGN ;07 - TOPS-20
FXFWAA!FX.UGN!FX.UFS ;08 - TOPS-10
FXFWAA ;09 - OS-8
FXFWAA!FX.UGN!FX.SND!FX.SGN ;10 - RMS-32S
FXFWAA ;11 - CP/M
FXFWAA ;12 - MS-DOS
IFN <$DVFMX-<.-DPWAAT>+1>,<IF1,<
PRINTX ? DPWAAT table out of sync with protocol maximum>>
;MORE CONVERSION TABLES
;ASCII TO DAP RECORD FORMAT BASED ON OPERATING SYSTEM TYPE
DARFTB::0 ;00 -
$DVFST ;01 - RT-11 ;[1001]
$DVFVR ;02 - RSTS/E
$DVFVR ;03 - RSX-11S
$DVFVR ;04 - RSX-11M
$DVFVR ;05 - RSX-11D
$DVFVR ;06 - IAS
$DVFVR ;07 - VAX/VMS
$DVFNR ;08 - TOPS-20
$DVFNR ;09 - TOPS-10
$DVFNR ;10 - RTS-8
$DVFNR ;11 - OS-8
$DVFVR ;12 - RSX-11M+
$DVFVR ;13 - COPOS/11
$DVFVR ;14 - P/OS
$DVFVR ;15 - VAX/ELAN
$DVFVR ;16 - CP/M
$DVFVR ;17 - MS-DOS
IFN <$DVOMX-<.-DARFTB>+1>,<IF1,<
PRINTX ? DARFTB table out of sync with protocol maximum>>
;ASCII TO DAP RECORD ATTRIBUTES BASED ON OPERATING SYSTEM TYPE
DARATB::0 ;00 -
0 ;01 - RT-11 ;[1001]
DPFLG1 (<ILC>) ;02 - RSTS/E
DPFLG1 (<ILC>) ;03 - RSX-11S
DPFLG1 (<ILC>) ;04 - RSX-11M
DPFLG1 (<ILC>) ;05 - RSX-11D
DPFLG1 (<ILC>) ;06 - IAS
DPFLG1 (<ILC>) ;07 - VAX/VMS
0 ;08 - TOPS-20
0 ;09 - TOPS-10
0 ;10 - RTS-8
0 ;11 - OS-8
DPFLG1 (<ILC>) ;12 - RSX-11M+
DPFLG1 (<ILC>) ;13 - COPOS/11
DPFLG1 (<ILC>) ;14 - P/OS
DPFLG1 (<ILC>) ;15 - VAX/ELAN
DPFLG1 (<ILC>) ;16 - CP/M
DPFLG1 (<ILC>) ;17 - MS-DOS
IFN <$DVOMX-<.-DARATB>+1>,<IF1,<
PRINTX ? DARATB table out of sync with protocol maximum>>
;IMAGE (BINARY) TO DAP RECORD FORMAT BASED ON OPERATING SYSTEM TYPE
DBRFTB::0 ;00 -
$DVFVR ;01 - RT-11
$DVFVR ;02 - RSTS/E
$DVFVR ;03 - RSX-11S
$DVFVR ;04 - RSX-11M
$DVFVR ;05 - RSX-11D
$DVFVR ;06 - IAS
$DVFVR ;07 - VAX/VMS
$DVFNR ;08 - TOPS-20
$DVFNR ;09 - TOPS-10
$DVFNR ;10 - RTS-8
$DVFNR ;11 - OS-8
$DVFVR ;12 - RSX-11M+
$DVFVR ;13 - COPOS/11
$DVFVR ;14 - P/OS
$DVFVR ;15 - VAX/ELAN
$DVFVR ;16 - CP/M
$DVFVR ;15 - MS-DOS
IFN <$DVOMX-<.-DBRFTB>+1>,<IF1,<
PRINTX ? DBRFTB table out of sync with protocol maximum>>
;IMAGE (BINARY) TO DAP RECORD ATTRIBUTES BASED ON OPERATING SYSTEM TYPE
DBRATB::0 ;00 -
0 ;01 - RT-11
0 ;02 - RSTS/E
0 ;03 - RSX-11S
0 ;04 - RSX-11M
0 ;05 - RSX-11D
0 ;06 - IAS
0 ;07 - VAX/VMS
0 ;08 - TOPS-20
0 ;09 - TOPS-10
0 ;10 - RTS-8
0 ;11 - OS-8
0 ;12 - RSX-11M+
0 ;13 - COPOS/11
0 ;14 - P/OS
0 ;15 - VAX/ELAN
0 ;16 - CP/M
0 ;17 - MS-DOS
IFN <$DVOMX-<.-DBRATB>+1>,<IF1,<
PRINTX ? DBRATB table out of sync with protocol maximum>>
;CONVERT FROM DAP PROTECTION CODES TO LOCAL FILE PROTECTION CODES
;CALL IS:
;
; MOVD T1,<DPRT>
; PUSHJ P,DPFPXL/DPFPXO
; return
;
;Where <DPRT> is the DAPISH file protection mask.
;
;Call DPFPXL for group and world protections, DPFPXO for owner protection
;
;On return, the local TOPS-10 LEVEL-D disk system protection code is
;in T2.
;
;Uses T1 - T2.
DPFPXL::SETZ T2, ;ASSUME UNLIMITED ACCESS
TFZE T1,PCP ;DENY PROTECTION CHANGE?
MOVEI T2,1 ;YES
TFZE T1,PDE ;DENY DELETE/RENAME?
MOVEI T2,2 ;YES
TFZE T1,PWR ;DENY WRITE?
MOVEI T2,3 ;YES
TFZE T1,PUP ;DENY UPDATE?
MOVEI T2,4 ;YES
TFZE T1,<PAP,PXT> ;DENY APPEND OR EXTEND?
MOVEI T2,5 ;YES
TFNE T1,<PRD,PDI> ;DENY READ OR DIRECTORY ACCESS?
MOVEI T2,6 ;YES
TFNE T1,PEX ;DENY EXECUTE?
JRST [TFNE T1,PRD ;YES - BUT STILL ALLOW READ?
MOVEI T2,7 ;NO, DISALLOW ALL ACCESS
JRST .+1] ;CONTINUE
TFZ T1,<PRD,PDI,PEX>;BLAST SOME BITS
JUMPE T1,.POPJ## ;RETURN DATA FILE PROTECTION IN T2
STOPCD <Excess DAP protection mask bits in DPFPXL>
DPFPXO::SETZ T2, ;ASSUME UNLIMITED ACCESS
TFZE T1,PCP ;DENY PROTECTION CHANGE?
MOVEI T2,1 ;YES
TFZE T1,<PDE,PWR,PUP,PAP,PXT> ;DENY DELETE!WRITE!ETC.?
MOVEI T2,2 ;YES
TFZE T1,<PRD,PDI,PEX>;DENY READ, DIRECTORY, OR EXECUTE ACCESS?
MOVEI T2,3 ;YES
POPJ P, ;RETURN FILE PROTECTION IN T2
;CONVERT FROM LOCAL FILE PROTECTION CODES TO DAP PROTECTION FLAGS
FPDPTB::0 ;0 - ALL ACCESSES
DPFLG1 (<PCP>) ;1 - DENY PROTECTION CHANGE
DPFLG1 (<PCP,PDE>) ;2 - DENY RENAME
DPFLG1 (<PCP,PDE,PWR>) ;3 - DENY WRITE
DPFLG1 (<PCP,PDE,PWR,PUP>) ;4 - DENY UPDATE
DPFLG1 (<PCP,PDE,PWR,PUP,PAP,PXT>) ;5 - DENY APPEND
DPFLG1 (<PCP,PDE,PWR,PUP,PAP,PXT,PRD,PDI>) ;6 - DENY READ, DIRECTORY
DPFLG1 (<PCP,PDE,PWR,PUP,PAP,PXT,PRD,PDI,PEX>) ;7 - DENY ALL ACCESSES
;FOR OWNER PROTECTION (HIGH BIT IS FILDAE BIT)
FPDPTO::0 ;0 - ALL ACCESSES
DPFLG1 (<PCP>) ;1 - DENY PROTECTION CHANGE
DPFLG1 (<PCP,PDE,PWR,PUP,PAP,PXT>) ;2 - DENY APPEND
DPFLG1 (<PCP,PDE,PWR,PUP,PAP,PXT,PRD,PDI,PEX>) ;3 - DENY ALL ACCESSES
0 ;4 - ALL ACCESSES
DPFLG1 (<PCP>) ;5 - DENY PROTECTION CHANGE
DPFLG1 (<PCP,PDE,PWR,PUP,PAP,PXT>) ;6 - DENY APPEND
DPFLG1 (<PCP,PDE,PWR,PUP,PAP,PXT,PRD,PDI,PEX>) ;7 - DENY ALL ACCESSES
SUBTTL "TYPEOUT" SUPPORT ROUTINES
;TOTFL -- TYPE OUT TERTIARY "LOCAL FILE SPECIFICATION" FROM CDB
;TOTFN -- TYPE OUT TERTIARY "NETWORK FILE SPECIFICATION" FROM CDB
;TOTFS -- TYPE OUT TERTIARY GENERIC FILE SPECIFICATION FROM CDB
;CALL IS:
;
; MOVX T1,<CDB>
; MOVX T2,<FLGS> ;TOTFS ONLY
; PUSHJ P,TOTFL/TOTFN/TOTFS
; error return
; normal return
;
;Where <CDB> is the address of an I/O CDB; and <FLG> are file spec control
;flags (governing output form) a la .TOFSB.
;
;.TOTFL types out the file specification sans node name (i.e., the
;"local" file spec), while .TOTFN types out the file specification
;including the node name (the "network" file spec). The file spec is
;in "standard" format - nod::dev:[dir]nam.ext.gen.
;
;.TOTFS types out the file specification as per the control flags passed
;in register T2 (see .TOFSB for details of the file spec control flags).
;
;The error return is not exercised.
;
;On normal return the currently-active tertiary file specification
;is "typed out" via .TCHAR.
;
;Uses T1, T2, T3, T4.
ENTRY .TOTFN
INTERN TOTFN0, TOTFN1
.TOTFN: PUSHJ P,.SACIO## ;SETUP I/O CONTEXT
TOTFN0: PUSHJ P,.SAVE4## ;SAVE THE P ACS
TOTFN1: MOVX T2,FX.UND!FXFWAA!FX.UGN ;WANT NODE::DEV:[DIR]NAM.TYP.GEN
JRST TOTFS1 ;TYPE REST OF FILE SPEC
ENTRY .TOTFL
INTERN TOTFL0, TOTFL1
.TOTFL: PUSHJ P,.SACIO## ;SETUP I/O CONTEXT
TOTFL0: PUSHJ P,.SAVE4## ;SAVE THE P ACS
TOTFL1: MOVX T2,FXFWAA!FX.UGN;WANT DEV:[DIR]NAM.TYP.GEN
JRST TOTFS1 ;GO TYPE OUT THE FILE SPEC
ENTRY .TOTFS
INTERN TOTFS0, TOTFS1
.TOTFS: PUSHJ P,.SACIO## ;SETUP I/O CONTEXT
TOTFS0: PUSHJ P,.SAVE4## ;SAVE THE P ACS
TOTFS1: PUSH P,.IOFND(IO) ;NODE
PUSH P,.IOFDV(IO) ; DEVICE
PUSH P,.IOFDR(IO) ; DIRECTORY
PUSH P,.IOFNM(IO) ; NAME
PUSH P,.IOFEX(IO) ; EXTENSION
PUSH P,.IOFGN(IO) ; GENERATION
MOVSI T1,.IOF3D(IO) ;ADDRESS OF TERTIARY NODE NAME ADDRESS
HRRI T1,.IOFND(IO) ;ADDRESS OF NORMAL NODE NAME ADDRESS
BLT T1,.IOFGN(IO) ;COPY TERTIARY BLOCK ONTO NORMAL BLOCK
PUSHJ P,TOCFS1 ;TYPE OUT FILE SPEC AS DIRECTED
JFCL ;HO HUM
POP P,.IOFGN(IO) ; GENERATION
POP P,.IOFEX(IO) ; EXTENSION
POP P,.IOFNM(IO) ; NAME
POP P,.IOFDR(IO) ; DIRECTORY
POP P,.IOFDV(IO) ; DEVICE
POP P,.IOFND(IO) ;NODE
JRST .POPJ1## ;RETURN WITH USER NONE-THE-WISER
;TOCFL -- TYPE OUT "LOCAL FILE SPECIFICATION" FROM CDB
;TOCFN -- TYPE OUT "NETWORK FILE SPECIFICATION" FROM CDB
;TOCFS -- TYPE OUT GENERIC FILE SPECIFICATION FROM CDB
;CALL IS:
;
; MOVX T1,<CDB>
; MOVX T2,<FLGS> ;TOCFS ONLY
; PUSHJ P,TOCFL/TOCFN/TOCFS
; error return
; normal return
;
;Where <CDB> is the address of an I/O CDB; and <FLG> are file spec control
;flags (governing output form) a la .TOFSB.
;
;.TOCFL types out the file specification sans node name (i.e., the
;"local" file spec), while .TOCFN types out the file specification
;including the node name (the "network" file spec). The file spec is
;in "standard" format - nod::dev:[dir]nam.ext.gen.
;
;.TOCFS types out the file specification as per the control flags passed
;in register T2 (see .TOFSB for details of the file spec control flags).
;
;The error return is not exercised.
;
;On normal return the currently-active file's file specification
;is "typed out" via .TCHAR.
;
;Uses T1, T2, T3, T4.
ENTRY .TOCFN
INTERN TOCFN0, TOCFN1
.TOCFN: PUSHJ P,.SACIO## ;SETUP I/O CONTEXT
TOCFN0: PUSHJ P,.SAVE4## ;SAVE THE P ACS
TOCFN1: MOVX T2,FX.UND!FXFWAA!FX.UGN ;WANT NODE::DEV:[DIR]NAM.TYP.GEN
JRST TOCFS1 ;TYPE REST OF FILE SPEC
ENTRY .TOCFL
INTERN TOCFL0, TOCFL1
.TOCFL: PUSHJ P,.SACIO## ;SETUP I/O CONTEXT
TOCFL0: PUSHJ P,.SAVE4## ;SAVE THE P ACS
TOCFL1: MOVX T2,FXFWAA!FX.UGN;WANT DEV:[DIR]NAM.TYP.GEN
JRST TOCFS1 ;GO TYPE OUT THE FILE SPEC
ENTRY .TOCFS
INTERN TOCFS0, TOCFS1
.TOCFS: PUSHJ P,.SACIO## ;SETUP I/O CONTEXT
TOCFS0: PUSHJ P,.SAVE4## ;SAVE THE P ACS
TOCFS1: MOVE P1,T2 ;PRESERVE FILE SPEC TYPEOUT CONTROL
TXNN P1,FX.UND ;WANT THE NODE NAME TYPED?
JRST TOCFS2 ;NO
SKIPE T1,.IOFND(IO) ;GOT A NODE STRING?
SKIPN 0(T1) ;PROBABLY, ANY TEXT IN STRING?
JRST TOCFS2 ;NO
PUSHJ P,.TSTRG## ;YES, TYPE NODE NAME
PUSHJ P,.TCOLN## ;FOLLOWED BY A "::"
PUSHJ P,.TCOLN## ; . . .
TOCFS2: TXNN P1,FX.UDV ;WANT DEVICE NAME TYPED?
JRST TOCFS3 ;NO
SKIPE T1,.IOFDV(IO) ;GOT A DEVICE STRING?
SKIPN 0(T1) ;PROBABLY, ANY TEXT IN STRING?
JRST TOCFS3 ;NO
PUSHJ P,.TSTRG## ;YES, TYPE DEVICE NAME
PUSHJ P,.TCOLN## ;FOLLOWED BY A ":"
TOCFS3: TXNN P1,FX.UDR ;WANT DIRECTORY NAME TYPED?
JRST TOCFS4 ;NO
SKIPE T1,.IOFDR(IO) ;GOT A DIRECTORY STRING?
SKIPN 0(T1) ;PROBABLY, ANY TEXT IN STRING?
JRST TOCFS4 ;NO
PUSHJ P,.TLBRK## ;PRECEDE WITH A "["
MOVE T1,.IOFDR(IO) ;ADDRESS OF DIRECTORY STRING
PUSHJ P,.TSTRG## ;TYPE DIRECTORY NAME
PUSHJ P,.TRBRK## ;CAP OFF WITH A "]"
TOCFS4: TXNN P1,FX.UNM ;WANT FILE NAME TYPED?
JRST TOCFS5 ;NO
SKIPE T1,.IOFNM(IO) ;GOT A FILE NAME STRING?
SKIPN 0(T1) ;PROBABLY, ANY TEXT IN STRING?
JRST TOCFS5 ;NO
PUSHJ P,.TSTRG## ;YES, TYPE FILE NAME
TOCFS5: TXNN P1,FX.UEX ;WANT THE EXTENSION TYPED?
JRST TOCFS6 ;NO
SKIPE T1,.IOFEX(IO) ;GOT AN EXTENSION STRING?
SKIPN 0(T1) ;PROBABLY, ANY TEXT IN STRING?
JRST TOCFS6 ;NO
PUSHJ P,.TDOT## ;PREFIX WITH A DOT
MOVE T1,.IOFEX(IO) ;ADDRESS OF FILE EXTENSION STRING
PUSHJ P,.TSTRG## ;TYPE FILE EXTENSION
TXO P1,FX.SEX ;NOTE EXTENSION TYPED
TOCFS6: TXNN P1,FX.UGN ;WANT GENERATION TYPED?
JRST TOCFS7 ;NO
SKIPE T1,.IOFGN(IO) ;GOT A GENERATION STRING?
SKIPN 0(T1) ;PROBABLY, ANY TEXT IN STRING?
JRST TOCFS7 ;NO
TXNN P1,FX.SEX ;HAS EXTENSION BEEN OUTPUT YET?
PUSHJ P,.TDOT## ;NO, NEED A FIRST DOT THEN
TXNN P1,FX.SGN ;WANT GENERATION PRECEDED BY SEMICOLON?
PUSHJ P,.TDOT## ;NO, PRECEDE GENERATION WITH A DOT
TXNE P1,FX.SGN ;WANT GENERATION PRECEDED BY SEMICOLON?
PUSHJ P,.TSEMI## ;YES, PRECEDE GENERATON WITH A SEMICOLON
MOVE T1,.IOFGN(IO) ;ADDRESS OF GENERATION STRING
PUSHJ P,.TSTRG## ;TYPE FILE GENERATION
TOCFS7: JRST .POPJ1## ;RETURN
END