Trailing-Edge
-
PDP-10 Archives
-
bb-bt99l-bb
-
lcptab.x18
There is 1 other file named lcptab.x18 in the archive. Click here to see a list.
TITLE LCPTAB - LCP Command Parsing Tables
SUBTTL Copyright
;
;
;
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1984,1985,1986,1987.
;ALL RIGHTS RESERVED.
;
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SEARCH MACSYM
SEARCH GLXMAC
SEARCH ORNMAC
PROLOG LCPTAB
.TEXT "/LOCALS"
.CLIST==0
TOPS10 <
;DEFINE BREAK MASKS
BRINI. ;INITIALIZE BREAK MASK FOR STANDARD FIELD
BRKCH. (0,37) ;ALL CONTROL CHARACTERS
BRKCH. (40,54) ;SPACE THROUGH COMMA
BRKCH. (56,57) ;DOT AND SLASH
BRKCH. (72,77) ;COLON THROUGH QUESTION MARK
BRKCH. (100) ;ATSIGN
BRKCH. (133,140) ;OPEN BRACKET THROUGH ACCENT GRAVE
BRKCH. (173,177) ;CLOSE BRACKET THROUGH TILDE
FLDB0.==W0. ;STANDARD FIELD BREAK MASK
FLDB1.==W1.
FLDB2.==W2.
FLDB3.==W3.
> ;END TOPS10
; LCPKEY (next-pdb,keyword,symbol-suffix [,flags]) - Make keyword table entry
; for an LCP command and define a symbol to represent the keyword value
..Z==0
IF2 <PURGE ..Z>
DEFINE LCPKEY (NXT,CODE,KEY,FLAGS), <
IFNDEF $KL'CODE,<
$KL'CODE==:..Z ; Assign value to global symbol
..Z==..Z+1> ; Bump keyword code counter
IFN .CLIST, <PRINTX <$KL'CODE = 'KEY>>
IFB <FLAGS>, <DSPTAB (NXT,$KL'CODE,KEY)>
IFNB <FLAGS>, <DSPTAB (NXT,$KL'CODE,KEY,FLAGS)>
> ; End of LCPKEY Macro Definition
DEFINE GROUPS (NEXT,%A,%B,%C,%D), <
%A: $DIGIT (%B,<^D10>,<List Of Group Ranges "n:m" or Single Groups>,<$ACTION(CHKGRP)>)
%B: $TOKEN (%C,<:>,<$HELP(<":" To Specify Group Range>),$ALTERNATE(%D)>)
%C: $NUMBER (%D,<^D10>,<Ending Group Range>,<$ACTION(CHKGRP)>)
%D: $COMMA (%A,<$HELP(<"," To Specify Additional Group>),$ALTERNATE(NEXT)>)
IF2 <PURGE %A,%B,%C,%D>
> ; End of GROUPS Definition
NAMBM: BRMSK. (FLDB0.,FLDB1.,FLDB2.,FLDB3.,< $,_,.>)
STRBM: BRMSK. (FLDB0.,<FLDB1.&<^-<1_^D35!1_^D33!1_^D23>>>,FLDB2.,FLDB3.,!#$%&'()*+-./:;<=>@[\]^_`{|}~)
CHKL16: $SAVE <T1,T2,T3>
MOVEI T1,^D16 ;Check for max length of 16
JRST CHKLNG
CHKL64: $SAVE <T1,T2,T3>
MOVEI T1,^D64 ;Check for max length of 64
CHKLNG: MOVE S1,CR.COD(S2) ;Function type
CAIE S1,.CMFLD ;Must be field
$RETF ;Isn't
MOVE S1,CR.FLG(S2) ;Get pointer to the field
MOVE S1,.CMABP(S1) ; text.
SETZ T3,0 ;Zero character count
CHKNM0: ILDB T2,S1
SKIPE T2 ;End of the string found
AOJA T3,CHKNM0 ;Count the character
CAIE T3,0 ;Null name not permitted.
JRST CHKNM1
$TEXT ,<Name too short^A>
$RETF
CHKNM1: CAMG T3,T1
$RETT
$TEXT ,<Name too long^A>
$RETF
CHKGRP: MOVE S1,CR.RES(S2)
CAIG S1,^D255
SKIPGE S1
JRST CHKGRF
$RETT
CHKGRF: PUSHJ P,FIXIT
MOVEI S2,[ASCIZ /Group number must be between 0 and 255/]
$RETF
FIXIT: HRRZ T4,CR.FLG(S2) ;GET ADR OF CMDBLK
MOVE T1,.CMPTR(T4) ;GET COMMAND POINTER
MOVE T2,.CMABP(T4) ;GET BP TO ATOM BUFFER
FIXI.1: ILDB T3,T2
JUMPE T3,FIXI.2 ;DONE.. ALL FIXED UP
PUSHJ P,DBP ;DECREMENT THE BP
AOS .CMCNT(T4)
JRST FIXI.1 ;TRY NEXT CHARACTER
FIXI.2: MOVEM T1,.CMPTR(T4) ;STORE ADJUSTED BP
POPJ P,0
;
; Routine to decrement a "normal" 7 bit byte pointer in T1
;
DBP: ADD T1,[070000,,0] ;BACK UP A BYTE
SKIPGE T1 ;IF WE NEED TO,
SUB T1,[430000,,1] ; THEN BACK UP A WORD
$RET
SUBTTL Parsing Tree
LCPTAB::
EXP 2 ;Lenght of the table
EXP INIPDB ;Address of initial PDB
EXP TOPPDB ;Top level keyword PDB
INIPDB: $INIT (TOPPDB)
TOPPDB: $KEYDSP (LCPTBL)
LCPTBL: $STAB
LCPKEY (CLRPDB,CLR,<CLEAR>)
LCPKEY (SETPDB,SET,<SET>)
LCPKEY (SHWPDB,SHW,<SHOW>)
LCPKEY (PLSPDB,STA,<START>)
LCPKEY (PLSPDB,STP,<STOP>)
LCPKEY (ZROPDB,ZRO,<ZERO>)
$ETAB
CRLF: $CRLF ;Commands end with CR/LF
PLSPDB: $NOISE (CRLF,<Processing LAT sessions>)
CLRPDB: $KEYDSP (CLR000)
CLR000: $STAB
DSPTAB (SET700,.LPCOD,<GROUPS>)
DSPTAB (CRLF,.LPNID,<IDENTIFICATION>)
DSPTAB (CLR002,777777,<MAXIMUM>)
DSPTAB (CRLF,.LPMTI,<MULTICAST-TIMER>)
DSPTAB (CRLF,.LPNUM,<NUMBER>)
DSPTAB (CLR001,777777,<RETRANSMIT>)
DSPTAB (CLR100,.LPSRV,<SERVICE-NAME>)
$ETAB
CLR001: $KEY (CRLF,CLR011)
CLR011: $STAB
KEYTAB (.LPRLI,<LIMIT>)
KEYTAB (.LPTIM,<TIMER>)
$ETAB
CLR002: $KEY (CRLF,CLR012)
CLR012: $STAB
KEYTAB (.LPMAC,<ACTIVE-CIRCUITS>)
KEYTAB (.LPMCO,<SESSIONS>)
$ETAB
CLR100: $FIELD(CRLF,<Service name, 1 to 16 characters>,<$FLAGS(CM%BRK),$BREAK(NAMBM),$ACTION(CHKL16)>)
SETPDB: $KEYDSP (SET000)
SET000: $STAB
DSPTAB (SET700,.LPCOD,<GROUPS>)
DSPTAB (SET900,.LPNID,<IDENTIFICATION>)
DSPTAB (SET002,777777,<MAXIMUM>)
DSPTAB (SET600,.LPMTI,<MULTICAST-TIMER>)
; DSPTAB (SET800,.LPNNM,<NODE-NAME>)
DSPTAB (SET300,.LPNUM,<NUMBER>)
DSPTAB (SET001,777777,<RETRANSMIT>)
DSPTAB (SE1000,.LPSRV,<SERVICE-NAME>)
$ETAB
SET001: $KEYDSP (SET011)
SET011: $STAB
DSPTAB (SE2000,.LPRLI,<LIMIT>)
DSPTAB (SET500,.LPTIM,<TIMER>)
$ETAB
SET002: $KEYDSP (SET012)
SET012: $STAB
DSPTAB (SET100,.LPMAC,<ACTIVE-CIRCUITS>)
DSPTAB (SET200,.LPMCO,<SESSIONS>)
$ETAB
SET100: $NUMBER (CRLF,^D10,<Number of simultaneous servers allowed>)
SET200: $NUMBER (CRLF,^D10,<Number of LAT terminals>)
SET300: $NUMBER (CRLF,^D10,<Unique host id>)
SET500: $NUMBER (CRLF,^D10,<Timer value in milliseconds>)
SET600: $NUMBER (CRLF,^D10,<Timer value in seconds>)
SET700: GROUPS (CRLF)
SET800: $CTEXT (CRLF,<Text, 1 to 6 characters>)
SET900: $FIELD (CRLF,<Text, 1 to 64 characters>,<$FLAGS(CM%BRK),$BREAK(STRBM),$ACTION(CHKL64)>)
SE1000: $FIELD(SE1001,<Service name, 1 to 16 characters>,<$FLAGS(CM%BRK),$BREAK(NAMBM),$ACTION(CHKL16)>)
SE1001: $SWITCH (SE1020,SE1010,$ALTERNATE(SE1200))
SE1010: $STAB
KEYTAB (0,<RATING:>)
$ETAB
SE1020: $KEYDSP (SE1022,$ALTERNATE(SE1024))
SE1022: $STAB
DSPTAB (SE1100,0,<DYNAMIC>)
$ETAB
SE1024: $NUMBER (SE1100,^D10,<Rating value in range 0-255>)
SE1100: $SWITCH (SE1120,SE1110,$ALTERNAT(CRLF))
SE1110: $STAB
KEYTAB (1,<IDENTIFICATION:>)
$ETAB
SE1120: $QUOTE (CRLF,<Quoted string, 1 to 64 characters>)
SE1200: $SWITCH (SE1220,SE1210,$ALTERNATE(CRLF))
SE1210: $STAB
KEYTAB (1,<IDENTIFICATION:>)
$ETAB
SE1220: $QUOTE (SE1230,<Quoted string, 1 to 64 characters>)
SE1230: $SWITCH (SE1320,SE1310,$ALTERNATE(CRLF))
SE1310: $STAB
KEYTAB (0,<RATING:>)
$ETAB
SE1320: $KEYDSP (SE1322,$ALTERNATE(SE1324))
SE1322: $STAB
DSPTAB (CRLF,0,<DYNAMIC>)
$ETAB
SE1324: $NUMBER (CRLF,^D10,<Rating value in range 0-255>)
SE2000: $NUMBER (CRLF,^D10,<Number of times to retransmit before killing circuit>)
SHWPDB: $KEYDSP (SHW000)
SHW000: $STAB
DSPTAB (CRLF,0,<CHARACTERISTICS>)
DSPTAB (ZRO100,2,<COUNTERS>)
DSPTAB (CRLF,5,<HOST-INITIATED-REQUESTS>)
DSPTAB (CRLF,4,<PENDING-REQUESTS>)
DSPTAB (SHW200,3,<SERVER>)
DSPTAB (CRLF,1,<SESSIONS>)
$ETAB
SHW200:
TOPS20 <
$SWITCH (CRLF,SHW220,<$DEFAULT(/ALL),$ALTERNATE(SHW325)>)
>
TOPS10 <
$SWITCH (CRLF,SHW220,<$DEFAULT(ALL),$ALTERNATE(SHW325)>)
>
SHW220: $STAB
KEYTAB (0,<ALL>)
$ETAB
SHW325: $FIELD(CRLF,<Server name, 1 to 16 characters>,<$FLAGS(CM%BRK),$BREAK(NAMBM),$ACTION(CHKL16)>)
ZROPDB: $KEYDSP (ZRO000,$DEFAULT(COUNTERS))
ZRO000: $STAB
DSPTAB (ZRO100,0,<COUNTERS>)
$ETAB
ZRO100: $SWITCH (SHW325,ZRO120,$ALTERNATE(CRLF))
ZRO120: $STAB
KEYTAB (1,<SERVER:>)
$ETAB
END ;End of LCPTAB.MAC