Trailing-Edge
-
PDP-10 Archives
-
bb-bt99r-bb
-
sysini.x24
There are no other files named sysini.x24 in the archive.
TITLE SYSINI - SYSTEM INITIALIZATION AND ONCE-ONLY DIALOGUE - V2100
SUBTTL JOSEPH A. DZIEDZIC /JAD 05-SEP-89
SEARCH F,S,DEVPRM,NETPRM,BTSPRM
$RELOC
$INIT
.DIREC FLBLST ;FOR CLEANER LISTINGS
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; OR COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1969,1970,1971,1972,1973,1974,
; 1975,1976,1977,1978,1979,1980,1982,1984,1986,1988.
;ALL RIGHTS RESERVED.
.CPYRT<1969,1988>
XP VSYSII,2100 ;MODULE VERSION NUMBER
ENTRY SYSINI ;SYSTEM INITIALIZATION ROUTINE
;THE MONITOR MODULES SYSINI AND ONCE WERE COMBINED INTO ONE MODULE NAMED
;"SYSINI" IN THE VERSION 7.04 MONITOR. THE AUTHORS OF THOSE MODULES WERE:
;ONCE - T. HASTINGS/CHW/RCC/AF/DAL
;SYSINI - TH/RCC/TL/AF/PH/DAL/BGE/RLD/JBS
;NOTE THAT SYSINI MAY INCLUDE INITIALIZATION ROUTINES WHICH SHOULD NOT
;BE CALLED. THIS HAPPENS IF THE FEATURE TEST SWITCH FOR A FEATURE IS ON,
;BUT THE MODULE IS NOT LOADED BECAUSE OF THE ANSWER TO A MONGEN QUESTION.
;TO SOLVE THIS PROBLEM, COMMON DEFINES SYMBOLS =0 IF THE ROUTINE IS
;NOT TO BE CALLED, = NON-0 IF IT IS TO BE CALLED.
SAVITM=40 ;SAVED DEVICE DISPATCH ADDRESS IN IOGO
SUBTTL SYSTEM DEBUGGING STARTUP
;CODE TO SET MONITOR FOR DEBUGGING SESSION WITH EXEC DDT
;MAKE STARTUP BE FAST
;SYSTEM PROGRAMMER TYPES DEBUG$G TO START MONITOR
;ALLOW SAME COPY OF MONITOR TO BE USED FOR REGULAR SYSTEM
;SIMPLY BY NOT STARTING AT DEBUG.
DEBUG::
IFN FTXMON,<XJRST [MCSEC0+.+1]> ;ALWAYS STARTUP IN SECTION ZERO
MOVEI T1,DDTEND## ;END OF DDT
HRRM T1,PATSIZ ;INCLUDE DDT IN SYSTEM SIZE
;PATCH DDTCPU WITH A JFCL TO BYPASS SMP DEBUGGING FEATURES
IFN FTMP,<
MOVE T1,BOOTCP## ;GET OUR CPU NUMBER
DDTCPU: MOVEM T1,DEBCPU## ;SAVE FOR DEBUGGING SMP
>; END IFN FTMP
MOVSI T1,(DF.SBD+DF.NAR) ;FLAG SYSTEM DEBUGGING IN PROGRESS,
; DISABLE AUTOMATIC SYSTEM RELOAD
IORM T1,DEBUGF## ;FLAG DEBUGGING MODE
; SO WHY RELOAD, LONG DIALOG
; UNITS OFF-LINE NOT ASKED
;ALSO, NOTICES 21 NON-ZERO
; RETURN IS BY GOBACK$G
MOVEI T1,ST.NRT ;TURN OFF REMOTE
IORM T1,STATES## ; TTY'S
JRST SYSINI ;START UP SYSTEM
;IF PATCHED WITH A SIXBIT STRUCTURE NAME, SAID STRUCTURE WILL BE STUFFED
;INTO THE SDL AND SSL, AND THE LOGICAL UNITID INTO THE ASL. A MINUS ONE
;MEANS USE THE BOOTSTRAP STRUCTURE.
DDTDSK::EXP 0 ;DEFAULT TO NORMAL ASL/SDL/SSL STUFF
;ROUTINE TO SEE IF MONITOR WILL RUN WITH EDDT
DDTCHK: HRRZ T1,PATSIZ ;GET START OF PATCH SPACE
SKIPL DEBUGF## ;DEBUGGING?
CAIN T1,DDTEND## ;KEEPING EDDT?
JRST DDTCH2 ;YES
SKIPA T2,[-$NB##,,0] ;AOBJN POINTER TO DDT'S BREAKPOINTS
DDTCH1: ADDI T2,$2B##-$1B##-1 ;OFFSET TO NEXT BREAKPOINT
SKIPG $1B##(T2) ;THIS BREAKPOINT SET?
AOBJN T2,DDTCH1 ;NO, CHECK THE REST
JUMPGE T2,CPOPJ## ;NORMAL STARTUP?
DDTCH2: MOVEI T1,DDTEND## ;FIX UP PATSIZ
HRRM T1,PATSIZ ;...
JRST CPOPJ1## ;INDICATE RUNNING WITH EDDT
SUBTTL PRIMARY SYSTEM INITIALIZATION
;SYSINI IS BRANCHED TO FROM SYSTRT (COMMON) OR DEBUG (SYSINI) TO
;BEGIN SYSTEM INITIALIZATION. PAGING HAS BEEN TURNED ON.
SYSINI::CONO APR,AP.IOR ;IO RESET
MOVE P,.CPNPD## ;SET UP A PDL FOR THIS
SETZM CLKDDT ;ZERO OUT LOCATIONS
SETZM CPNDDT ; WHICH MIGHT CAUSE
SETZM CRSHWD ; PROBLEMS DURING
SETZM SYSSNP ; INITIALIZATION OR LATER
MOVE T1,CRSDTM ;GET DATE/TIME OF LAST CRASH
MOVEM T1,CRSSAV ;SAVE FOR AVAIL.SYS
MOVEI F,CT.P6 ;ASSUME A 166 (PDP-6) PROCESSOR
JFCL 17,.+1 ;CLEAR ALL FLAGS
JRST .+1 ;SET PC CHANGE FLAG IF CPU IS A 166
JFCL 1,CPU166 ;BRANCH IF PDP-6
SETZ T1, ;THE TEST FOR A KL10 PROCESSOR
BLT T1,0 ;IS A NO-OP BLKT LEAVING AC NON-ZERO
JUMPE T1,CPU166 ;JUMP IF NOT KL OR KS
MOVEI P1,1
SETZ P2, ;BIG BINARY INTEGER
MOVEI P4,1 ;ONE DIGIT BYTE
EXTEND P1,[CVTBDO] ;CONVERT WILL ABORT
TLNN P4,200000 ;TEST EFFECT ON N
JRST CPKS10
; JRST CPKL10
CPKL10: SKIPA F,[CT.KL] ;SET TYPE AS KL10
CPKS10: MOVEI F,CT.KS ;SET TYPE AS KS
CPU166: CAME F,.CPTYP## ;DO WHAT THE MONITOR WAS BUILT FOR AND
; THE CURRENT MACHINE AGREE?
STOPCD .,HALT,WCT ;++WRONG CPU TYPE
SYSIN1:
IFN FTKL10,<
APRID T1 ;READ MISCELLANEOUS JUNK
MOVEI T2,^D60 ;ASSUME NORTH AMERICAN LINE FREQUENCY
TRNE T1,ID.50H ;50 CYCLE DYNAMOS?
MOVEI T2,^D50 ;YES
> ;END IFN FTKL10
IFN FTKS10,<
MOVEI T2,M.TPS## ;THERE'S GOT TO BE A BETTER WAY OF DOING THIS
> ;END IFN FTKS10
MOVEM T2,TICSEC## ;SAVE TICKS/SECOND FOR CLOCK1, GETTABS, ETC.
MOVSI T3,(ST.CYC) ;SET BIT SIX OF STATES IF 50 HZ POWER
CAIN T2,^D50 ;50 HERTZ POWER?
IORM T3,STATES## ;YES
IMULI T2,^D60 ;COMPUTE THE NUMBER OF TICKS PER MINUTE
MOVEM T2,TICMIN## ;SAVE FOR CURIOUS EYES
IMULI T2,^D60*^D24 ;NUMBER OF TICS PER DAY
MOVEM T2,MIDNIT## ;SAVE THAT FOR MIDNIGHT CHECKING
IFN FTMP,<
MOVEI T1,M.CPU## ;SETUP COUNTER
SYSIN2: MOVNI T2,(T1) ;MINUS CPU NUMBER
IMUL T2,TICSEC## ;COMPUTE INITIAL OK WORD
MOVEM T2,COKTAB##-1(T1) ;STORE AWAY
SOJG T1,SYSIN2 ;FILL THE TABLE
> ;END IFN FTMP
IFN FTKL10,<
MOVE T1,.CPCPN## ;FOR THIS CPU
PUSHJ P,DTEINI## ;INITIALIZE DTE'S EARLY
PUSHJ P,ENTSPC## ;START SECONDARY PROTOCOL ON MASTER DTE
>; END IFN FTKL10
IFN FTKS10,<
PUSHJ P,DISKAL## ;DISABLE KEEP-ALIVE COUNTING
SETZM CTYIWD ;ZERO OUT 8080 COMMS WORDS
MOVE T1,[CTYIWD,,CTYIWD+1]
BLT T1,KLIOWD
>; END IFN FTKS10
IFN FTMP,<
PUSHJ P,BCOM0## ;ESTABLISH CPU 0
>; END IFN FTMP
MOVE T1,[<PM.DCD>B2+PM.WRT+PM.PUB+NUPMPP##] ;SET UP NULL JOB MAPPING
MOVEM T1,NLUPMP##+.UMUPT ; FOR UPT
MOVEM T1,NLUPMP##+.UMUPM ; FOR S0 MAP
MOVEM T1,NLUPMP##+.UMUUP ; FOR CACHED UPMP REFERENCES
MOVEM T1,NLUPMP##+.UMJDT ; FOR .JDAT REFERENCES
CLRPGT ;MAKE SURE CHANGES IN MAPPING ARE VISIBLE
PUSHJ P,BOOTNX ;COPY BOOTSTRAP NXMTAB
PUSHJ P,BOOTSZ ;FIXUP SYSORG TO ACCOUNT FOR UNMAPPED BOOTSTRAP
PUSHJ P,BOOTFX ;FIND OUT WHERE THE MONITOR WAS READ FROM
IFN FTXMON,<PUSHJ P,BOOTMP> ;MAP BOOT INTO THE MONITOR'S ADDRESS SPACE
PUSHJ P,PATFIX ;FIXUP "PAT" GLOBAL BEFORE MOVING SYMBOL TABLE
SUBTTL MOVE MONITOR PSECTS TO FINAL RESTING PLACES
;THE ORDER IN WHICH THE VARIOUS PIECES OF THE MONITOR ARE MOVED AROUND
;IS VERY IMPORTANT DUE TO THE ORDERING OF THE PSECTS IN THE .EXE FILE.
;DON'T CHANGE THIS ORDER UNLESS YOU KNOW WHAT YOU ARE DOING, AND THEN
;BE SMART AND DON'T CHANGE THE ORDER ANYWAY.
;
;FOR NON-EXTENDED MONITOR: MOVE HIGH SEGMENT AND THEN SYMBOL TABLE.
;
;FOR EXTENDED MONITOR: MOVE EXTENDED HIGH SEGMENT, EXTENDED SYMBOL TABLE,
;HIGH SEGMENT, AND THEN COMMON SUBROUTINES PSECT.
;FIRST SETUP MONVFF, SYSLEN, AND CSBLEN (IFN FTXMON)
SETLEN: MOVE T1,MONEND## ;GET LAST ADDRESS IN HIGH SEGMENT
SUBI T1,MONORG##-1 ;SUBTRACT ORIGIN OF HIGH SEGMENT
TRZE T1,PG.BDY ;ROUND UP
ADDI T1,PAGSIZ ;LENGTH OF THE HIGH SEGMENT IN WORDS
MOVEM T1,SYSLEN## ;STORE THE LENGTH OF THE HIGH SEGMENT
ADDI T1,MONORG## ;ADD IN START OF HIGH SEGMENT
MOVEM T1,MONVFF## ;SET UP HONORABLE (BUT NO LONGER USED) VARIABLE
MOVEI T1,HLCSAD## ;HIGHEST LEGAL ADDRESS IN HIGH SEGMENT
SUB T1,MONVFF## ;SUBTRACT FIRST ADDRESS FOLLOWING HIGH SEGMENT
ASH T1,W2PLSH ;CONVERT TO A NUMBER OF PAGES
JUMPLE T1,SETLN1 ;QUIT IF NOTHING TO ZERO
MOVEI T2,<HLCSAD##/PAGSIZ>-1 ;LAST PAGE TO CLEAR MAPPING FOR
ADD T2,.CPMAP## ;ADD IN ADDRESS OF SECTION 0/1 MAP
SETZM (T2) ;CLEAR AN ENTRY IN THE MAP
SOSLE T1 ;QUIT WHEN COUNT EXHAUSTED
SOJA T2,.-2 ;LOOP FOR ALL MAP SLOTS TO CLEAR
SETLN1:
IFN FTXMON,<
MOVE T1,CSBEND## ;GET LAST ADDRESS IN COMMON SUBS PSECT
SUBI T1,CSBORG##-1 ;SUBTRACT ORIGIN OF COMMON SUBS PSECT
TRZE T1,PG.BDY ;ROUND UP
ADDI T1,PAGSIZ ;LENGTH OF THE COMMON SUBS PSECT IN WORDS
MOVEM T1,CSBLEN## ;STORE THE LENGTH OF THE COMMON SUBS PSECT
SUBI T1,<MONORG##-CSBORG##> ;CALCULATE NUMBER OF WORDS NOT IN CSUB
JUMPGE T1,SETLN2 ;JUMP IF NO LEFT OVER WORDS
ASH T1,W2PLSH ;CONVERT TO NUMBER OF PAGES TO CLEAR
MOVEI T2,<MONORG##/PAGSIZ>-1 ;LAST PAGE TO CLEAR MAPPING FOR
ADD T2,.CPMAP## ;ADD IN ADDRESS OF SECTION 0/1 MAP
SETZM (T2) ;CLEAR AN ENTRY IN THE MAP
AOSGE T1 ;QUIT WHEN COUNT EXHAUSTED
SOJA T2,.-2 ;LOOP FOR ALL MAP SLOTS TO CLEAR
SETLN2:
>; END IFN FTXMON
;MOVE EXTENDED HIGH SEGMENT
IFN FTXMON,<
MOVXHI: MOVE T1,[XHIORG##] ;WHERE EXTENDED HIGH SEGMENT STARTS
MOVE T2,XHIEND## ;WHERE IT ENDS
CAMLE T1,T2 ;IS THERE ANY CODE TO MOVE?
JRST MOVXH1 ;NO, SKIP OVER SOME CODE
PUSHJ P,MOVPSE ;MOVE THE PSECT TO IT'S FINAL RESTING PLACE
IFN FTKL10,<
MOVE T1,.CPEPT## ;GET ADDRESS OF THIS CPU'S EPT
MOVSI T2,(PM.KPM) ;"KEEP ME" BIT
SKIPE .CPKPM## ;IF CPU HAS AN MCA25,
IORM T2,<SECTAB+<(MS.HGH)>>(T1) ; LIGHT THE BIT IN XHIGH SEC PTR
>; END IFN FTKL10
MOVXH1:
MOVXST: PUSHJ P,SYTBFX ;MOVE SYMBOL TABLE TO SECTION 35
;STILL IN IFN FTXMON
;MAP EXTENDED LOW SEGMENT 1:1 VIA INDIRECT POINTERS TO SECTION 0/1 MAP
MAPXLS: MOVE T3,.CPEPT## ;THIS CPU'S EPT
MOVE T1,<SECTAB+(MS.HGH)>(T3) ;SECTION POINTER FOR EXTENDED HIGH SEG MAP
MOVE T3,.CPMAP## ;THIS CPU'S MAP
MOVEM T1,.ECKSM/PAGSIZ(T3) ;TO MAKE THE MAP ADDRESSABLE
CLRPT .ECKSM ;MAKE NEW MAPPING VISIBLE
MOVEI T1,(<PM.ICD>B2+PM.WRT+PM.PUB+PM.CSH+PM.KPM+PM.SWB)
; INDIRECT POINTERS TO SECTION 0 MAP
HRLI T1,SPTLOW##-SPTTAB## ;SPT SLOT USED FOR MAPPING EXTENDED HIGH SEGMENT
MOVS T2,.CPCPN## ;OUR CPU NUMBER
ADD T1,T2 ;ADD THAT TO THE SPT INDEX
MOVEI T2,0 ;STARTING AT PAGE 0
MAPXL1: SKIPE (T3) ;IF THE PAGE EXISTS IN THE SECTION 0 MAP,
MOVSM T1,.ECKSM(T2) ;POINT AT IT IN THE EXTENDED HIGH SEG MAP
ADDI T1,1 ;NEXT PAGE
ADDI T3,1 ; ..
CAIGE T2,CSBORG##/PAGSIZ-1 ;UP TO COMMON SUBROUTINES ORIGIN?
AOJA T2,MAPXL1 ;NO, DO THE NEXT PAGE
TRZ T1,(PM.SWB) ;WRITE LOCKED FROM HERE ON OUT
ADDI T2,1 ;ACCOUNT FOR MISSING AOS AT END OF LOOP ABOVE
MOVE T4,CSBEND## ;GET END OF COMMON SUBROUTINES ENTRY
LSH T4,W2PLSH ;CONVERT TO HIGHEST PAGE TO MAP
MAPXL2: MOVSM T1,.ECKSM(T2) ;POINT AT IT IN THE EXTENDED HIGH SEG MAP
ADDI T1,1 ;NEXT PAGE
CAMGE T2,T4 ;THROUGH THE END OF THE COMMON SUBROUTINES?
AOJA T2,MAPXL2 ;NO, DO THE NEXT PAGE
ADDI T2,1 ;ACCOUNT FOR MISSING AOS AT END OF LOOP ABOVE
MOVEI T1,<XHIORG##&777777> ;IN-SECTION ORIGIN OF EXTENDED HIGH SEG
MOVEI T3,CSBORG## ;ORIGIN OF COMMON SUBROUTINES
ADD T3,CSBLEN## ;PLUS LENGTH
SUB T1,T3 ;CALCULATE NUMBER OF PAGES TO ZERO MAPPING FOR
ASH T1,W2PLSH
JUMPLE T1,MAPXL3 ;GO IF SOMETHING FUNNY HAPPENED
SETZM .ECKSM(T2) ;ZERO A WORD
SOSLE T1 ;DECREMENT COUNT, SKIP WHEN DONE
AOJA T2,.-2 ;LOOP FOR ALL
MAPXL3: MOVE T1,.CPMAP## ;NOW SETUP SKIP CPU MAPPING
MOVE T1,.EVCDB##/PAGSIZ(T1) ;GET MAPPING FOR FIRST CDB PAGE
TLO T1,(PM.SWB) ;WRITE ENABLE
MOVSI T2,-CDBPGS## ;NUMBER OF CDB PAGES TO MAP
MOVEM T1,.ECKSM+.EVCDB##/PAGSIZ(T2) ;STORE IN XHIGH SEG MAP
AOBJP T2,.+2 ;LOOP FOR ALL PAGES
AOJA T1,.-2 ;...
>; END IFN FTXMON
;MOVE .INIT. PSECT (BY HAND - SIGH)
MOVINI: MOVE P1,.CPMAP## ;GET ADDRESS OF S0/S1 MAP
MOVEI P2,.UPMAP-PAGSIZ ;LAST PAGE IN FUNNY SPACE AREA TO MOVE
MOVEI P3,<.UPMAP-PAGSIZ>/PAGSIZ ;INDEX INTO NULL JOB'S PAGE MAP
MOVI.1: PUSHJ P,GTPHPG ;GET A PHYSICAL PAGE
HRLI T1,(<PM.DCD>B2+PM.WRT) ;ACCESSIBLE AND WRITABLE
MOVEM T1,.ECKSM/PAGSIZ(P1) ;VIA ADDRESS .ECKSM
CLRPT .ECKSM ;MAKE NEW MAPPING VISIBLE
MOVS T2,P2 ;COPY SOURCE ADDRESS
HRRI T2,.ECKSM ;DESTINATION ADDRESS
BLT T2,.ECKSM+PG.BDY ;TRANSFER THE PAGE
HRRM T1,NLUPMP##(P3) ;STORE NEW MAPPING
SUBI P2,PAGSIZ ;BACK OFF BY ONE PAGE
CAIL P2,FYSORG ;DONE THEM ALL?
SOJA P3,MOVI.1 ;NO, LOOP
CLRPGT ;MAKE NEW FUNNY SPACE MAPPING VISIBLE
;MOVE HIGH SEGMENT
MOVHGH: MOVEI T1,MONORG## ;ORIGIN OF PSECT
MOVE T2,MONEND## ;END OF PSECT
PUSHJ P,MOVPSE ;MOVE THE PSECT TO IT'S FINAL RESTING PLACE
;MOVE COMMON SUBROUTINES PSECT
IFN FTXMON,<
MOVCSB: MOVEI T1,CSBORG## ;GET START OF PSECT
MOVE T2,CSBEND## ;GET END OF COMMON SUBROUTINES SEGMENT
PUSHJ P,MOVPSE ;MOVE THE PSECT TO IT'S FINAL RESTING PLACE
>; END IFN FTXMON
;FINISH UP WITH LOOSE ENDS
IFE FTXMON,<PUSHJ P,SYTBFX> ;FIXUP SYSORG TO ACCOUNT FOR HIDDEN SYMBOL
; TABLE, MOVE SYMBOL TABLE TO HIGH MEMORY
IFN FTXMON,<PUSHJ P,SETEDV##> ;SET UP EXEC DATA VECTOR
IFE FTXMON,<PUSHJ P,BOOTMP> ;MAP BOOT INTO THE MONITOR'S ADDRESS SPACE
PUSHJ P,BSTRNG ;BUILD BOOTS COMMAND FOR AUTO-RELOAD
IFN FTKL10,<PUSHJ P,CLRSBD##> ;CLEAN MEMORY CONTROLLERS
IFN FTXMON,<XJRST [MCSEC1+HIGHIN]> ;GET INTO SECTION 1 SO CAN LOOK AT THINGS
HIGHIN:
IFN FTXMON,<XJRST [MCSEC0+.+1]> ;RETURN TO SECTION 0
SUBTTL INITIALIZE TABLE OF LOWER CORE FOUR WORD BLOCKS FOR I/O
IFN FTKL10,<
SETLOW: MOVE T1,LOWPTR## ;ABOJN POINTER TO LOWTAB
SETOM (T1) ;SET IT TO ALL ONES
AOBJN T1,.-1 ; ..
MOVEI P1,LTINIT## ;ADDRESS OF TABLE CONTAINING ADDRESSES OF
; LOWER CORE FOUR WORD BLOCKS
HRRZ P2,LTINIT## ;ADDRESS OF FIRST FOUR WORD BLOCK
MOVEM P2,LOWLOC## ;STORE THAT AS ORIGIN OF FOUR WORD IOWD SPACE
SETLO1: SKIPN T2,(P1) ;NEXT CHUNK OF FOUR WORD SPACE
JRST SETLO2 ;ALL DONE
HLRZ T1,(P1) ;NUMBER OF FOUR WORD BLOCKS IN THIS CHUNK
HRRZS T2 ;0,,STARTING ADDRESS OF THIS CHUNK
SUBI T2,(P2) ;RELATIVE ADDRESS WITHIN IOWD SPACE
LSH T2,-2 ;FOUR WORDS PER BLOCK
IDIVI T2,^D36 ;NUMBER OF BITS REPRESENTING FOUR WORD BLOCKS
HRLS T2 ;WHERE THEY START IN THE TABLE
ADD T2,LOWPTR## ;MAKE AN AOBJN POINTER TO THE TABLE
PUSHJ P,SETZRS## ;INDICATE THAT THOSE BLOCKS ARE AVAILABLE
AOJA P1,SETLO1 ;LOOP UNTIL ALL CHUNKS ARE MARKED IN BIT TABLE
SETLO2: MOVEI T1,<<.LMMBL-.LMEBH>+3>/4 ;# OF 4-WORDS BLOCKS (= # OF BITS)
MOVEI T2,.LMEBH ;START OF EBOX/MBOX COUNTS IN UPT
PUSHJ P,MRKIOW ;MARK THE IOWD(S) IN USE
MOVEI T1,<<.EPPAC+1-.EPTMB>+3>/4 ;# 4-WORD BLOCKS (= # BITS)
MOVEI T2,.EPTMB ;START OF TIME BASE/PERF COUNT IN EPT
PUSHJ P,MRKIOW ;MARK THE IOWD(S) IN USE
>; END IFN FTKL10
SUBTTL ALLOCATE SECTION MAPS AND SCA FREE POOL
SETOM DINITF## ;TELL AUTCON WHAT KIND OF CORE TO GET
IFN FTXMON,<
MOVSI T1,(MS.MEM) ;DATA SECTION FOR PAGTAB/MEMTAB
PUSHJ P,ALCSMP ;ALLOCATE A SECTION MAP FOR SECTION 3
MOVSI T1,(MS.SCN) ;DATA SECTION FOR SCNSER DATA BASE
PUSHJ P,ALCSMP ;ALLOCATE A SECTION MAP FOR SECTION 4
MOVSI T1,(MS.SAT) ;DATA SECTION FOR SATS, ETC.
PUSHJ P,ALCSMP ;ALLOCATE A MAP FOR THIS SECTION
>; END IFN FTXMON
SUBTTL SET UP SPT AND SECTION MAP MAPPINGS
SETSPT: MOVEI T1,NUPMPP## ;PAGE NUMBER OF NULL JOB'S UPT
MOVNI T2,M.CPU## ;NUMBER OF CPUS
MOVEI T3,.E0MAP##/PAGSIZ ;PAGE NUMBER OF CPU0'S MAP
SETSP1: MOVEM T1,JBTUPM##(T2) ;SETUP CONTEXT SLOTS IN THE SPT
MOVEM T3,SPTLOW##+M.CPU##(T2) ;SPT ENTRIES FOR EXTENDED HIGH SECTION
ADDI T3,EPTDIF##/PAGSIZ ;NEXT MAP
AOJL T2,SETSP1 ;LOOP FOR ALL CPUS
MOVEM T1,JBTUPM##+0 ;AND JBTUPM FOR THE NULL JOB
IFN FTXMON,<
MOVSI T1,-<MXSECN-<(MS.FMD)>> ;-VE NUMBER OF SPTCOM SLOTS
MOVE T3,.CPEPT## ;ADDR OF OUR MAPPING PAGE
SETSP2: SKIPN T2,SECTAB+<(MS.FMD)>(T3) ;GET COMMON DATA SECTION MAP PAGE
MOVSI T2,1 ;MAKE ILLEGAL POINTER IF NOT ASSIGNED
MOVEM T2,SPTCOM##(T1) ;STORE FOR SPYING USERS
AOS T3 ;ADVANCE SECTION POINTER INDEX
AOBJN T1,SETSP2 ;LOOP OVER ALL SUCH SLOTS
MOVSI T1,-<(MS.FMD)>-1 ;AOBJN POINTER TO HARDWIRED SECTION MAPS
SETSP3: HRRZ T2,T1 ;GET SECTION NUMBER
ADD T2,.CPEPT## ;PLUS THE EPT ADDRESS
MOVE T2,SECTAB(T2) ;FETCH SECTION MAP POINTER
MOVEM T2,.CPMMA##(T1) ;MAKE ADDRESSABLE IN SECTION 37
AOBJN T1,SETSP3 ;LOOP FOR ALL HARDWIRED SECTIONS
>; END IFN FTXMON
SUBTTL INITIALIZE CORE ALLOCATION AND PRINT SYSTEM NAME
MOVE T1,[NZSFCH##,,NZSFCE##] ;SET UP END TABLE FOR ALLOCATION
BLT T1,NZSFCE##+NZSFCL##-1 ;COPY THE HEAD TABLE OVER
PUSHJ P,PATSIZ ;SET UP SYSSIZ, CHECK FOR B.P.'S AND NO EDDT
MOVE T1,ANFNUM## ;GET CENTRAL SITE STATION NUMBER
MOVEM T1,JBTLOC## ;AND SAVE IN JOB LOCATION TABLE
PUSHJ P,AUTINI## ;INITIALIZE AUTCON
CONO PI,PI.CPI ;CLEAR PI SYSTEM
IFN FTKS10,<PUSHJ P,UBAPIS##> ;ASSIGN PIS TO UNIBUS ADAPTERS
PUSHJ P,ONCINT ;START INTERVAL TIMER GIVING CLOCK TICKS
; FOR ONCE, SET UP ONCKLT SO APRINT AND
; OPRFIL CAN USE IT TO START UP TIMER AGAIN.
PUSHJ P,OTSET ;INITIALIZE OUTPUT BUFFER
PUSHJ P,CRLF## ;TYPE CR-LF
MOVEI T1,CONFIG## ;POINT AT SYSTEM NAME
PUSHJ P,CONMES## ;TYPE IT
PUSHJ P,PRSPC## ;SPACE OVER
MOVEI T1,SYSDAT## ;POINT AT SYSTEM CREATION DATE
PUSHJ P,CONMES## ;TYPE IT
PUSHJ P,CRLFOP ;ADD CRLF AND PUSH IT OUT
SUBTTL CHECK FOR FULL AMOUNT OF MEMORY ONLINE
CHKMEM: MOVSI T1,-NXMTBL## ;AOBJN POINTER
MOVEI R,NXMTAB## ;TABLE ADDRESS
PUSHJ P,SATCN## ;COUNT UP THE ZERO BITS
LSH T2,P2WLSH ;CONVERT TO WORDS
SKIPL DEBUGF## ;DEBUGGING?
CAML T2,NWCORE## ;OR AT LEAST AS MUCH AS SPECIFIED BY MONGEN?
JRST SYSLIM ;YES--SKIP MEMORY CHECK
TDZA P2,P2 ;FLAG FIRST TIME WE ASKED
CHKME1: TLO P2,400000 ;FOR CALLS TO A SUBROUTINE IN SYSINI
SETZB U,P4 ;INITIALIZE HIGHEST LOC TO ZERO
MOVEI P1,CORBLK## ;MAXIMUM PAGES OF PHYSICAL MEMORY POSSIBLE
CHKME2: CONO APR,AP.NXE## ;CLEAR NXM FLAG
CHKME3: ADDI U,PAGSIZ ;TRY NEXT PAGE
SETZ T2, ;CLEAR FLAGS
PUSHJ P,REFMEM## ;REFERENCE C(U)
CONSZ APR,AP.NXM## ;NON-EXISTANT?
SKIPA ;NXM
SOJG P1,CHKME3 ;KEEP LOOKING AS LONG AS NOT TOP OF MEMORY
SKIPN P4 ;FIRST TIME THROUGH?
MOVE P4,U ;YES, REMEMBER LOCATION OF LOWEST NON-EX MEM
SOJL P1,CHKME5 ;ACCOUNT FOR MISSED SOJ AND SEE IF FINISHED
MOVE P3,U ;NOW SEE IF ANY MEMORY EXISTS HIGHER UP
CHKME4: CONO APR,AP.NXE## ;CLEAR NXM FLAG
ADDI P3,PAGSIZ ;TRY NEXT PAGE
PUSH P,U ;SAVE U
MOVE U,P3 ;SET ARG FOR REFMEM
PUSHJ P,REFMEM## ;REFERENCE IT
POP P,U ;RESTORE U
CONSZ APR,AP.NXM## ;IS IT THERE?
SOJG P1,CHKME4 ;NO, LOOP THROUGH ALL GEN'D MEMORY
SOJLE P1,CHKME5 ;JUMP IF NO MORE EXISTANT MEMORY
PUSHJ P,MEMBAD ;TELL THE OPERATOR HE HAS HOLES IN MEMORY
JRST CHKME1 ;HE SAID HE FIXED IT. GO SEE IF HE DID.
JFCL ;OFF-LINE
MOVE U,P3 ;HE SAID ITS BROKEN
JRST CHKME2 ;GO SEE IF THERE ARE ANY MORE HOLES
CHKME5: SKIPL DEBUGF## ;DEBUGGING? (ALREADY REPORTED HOLES)
CAML U,NWCORE## ;AS MUCH MEMORY AS SPECIFIED BY MONGEN?
JRST CHKME6 ;THERE IS SO NO REASON TO COMPLAIN
MOVE P3,NWCORE## ;REMIND HIM OF HOW MUCH MONGEN'ED MEMORY
PUSHJ P,MEMBAD ;TELL THE OPERATOR THERE'S NOT THAT MUCH THERE
JRST CHKME1 ;OPR SAID FIXED, SEE IF HE REALLY DID
MOVEM U,NWCORE## ;OPR SAID DOWN, NO EXTRA CORE FOR PAGTAB, ETC.
;BRING SYSTEM UP WITHOUT ALL OF MEMORY ONLINE
CHKME6: SKIPE P2 ;IF WE COMPLAINED,
PUSHJ P,SUNXMT ; MUST SET NXMTAB UP AGAIN
SUBTTL INITIALIZE NXMPTR AND CORE ALLOCATION VARIABLES
;SET UP BYTE POINTER TO NXMTAB AND CORE ALLOCATION VARIABLES
SYSLIM: MOVEI T1,CORBLK## ;MAXIMUM # OF PAGES OF MEMORY POSSIBLE
MOVEI F,PAGSIZ ;CORE SIZE INCREMENT
SETZB U,P1 ;CLEAR AMOUNT OF CONTIGUOUS MEMORY DETECTED
; AND MAXIMUM SIZE OF SINGLE USER
MOVE P3,[POINT 1,NXMTAB##] ;GET BYTE POINTER TO NXMTAB
SYSLM1: ILDB T4,P3 ;GET BYTE FROM NXMTAB
CAML U,SYSSIZ## ;STILL IN MONITOR (FIRST LOC NOT USED BY MON)?
SKIPE T4 ;NO, IS THIS PAGE NON-EXISTANT?
JRST SYSLM2 ;NOT PAST END OF MONITOR OR NON-EXISTANT PAGE
MOVEM U,MEMSIZ## ;SET SIZE OF PHYSICAL MEMORY EVEN HIGHER
HRRZ T3,CORLIM## ;MAXIMUM CORE AVAILABLE TO A SINGLE USER.
; DEFINED BY MONGEN, MODIFIED BY ONCE
CAMGE P1,T3 ;REACHED MAX YET FOR SINGLE USER?
ADDM F,CORMAX## ;NO, INCREASE MAX SIZE CORE AVAIL. TO A USER
ADDM F,MAXMAX## ;INCREMENT HIGHEST LEGAL CORMAX
ADDM F,RMCMAX## ;REAL MAXIMUM LEGAL CORMAX
AOS P1,CORTAL## ;INCREMENT NO. OF FREE 1K BLOCKS
SYSLM2: ADD U,F ;INCREMENT MEMORY REF
SOJG T1,SYSLM1 ;CHECKED EVERY POSSIBLE PAGE YET?
ADDM F,MEMSIZ## ;SET SIZE OF PHYSICAL MEMORY SO EQUAL
; TO THE FIRST NON-EX MEM ADR
MOVE T1,MEMSIZ## ;SIZE OF MEMORY =
LSH T1,W2PLSH ;PAGE NUMBER OF HIGHEST EXISTANT PAGE
TRZE T1,PG.BDY ;ROUND UP TO 256K BOUNDARY
ADDI T1,PP256K##
IDIVI T1,^D36
MOVNI T1,1(T1) ;NUMBER OF WORDS IN NXMTAB
HRLI T1,NXMTAB## ;FORM AN AOBJN POINTER
MOVSM T1,NXMPTR## ;STORE IT FOR DAEMON AND MONBTS
SUBTTL ALLOCATE MEMORY MANAGEMENT TABLES
MMTALC: MOVE T1,MEMSIZ## ;HIGHEST ADDRESS + 1
CAMGE T1,NWCORE## ;GREATER THAN HIGHEST ADDRESS SYSTEM WAS MONGENED FOR?
MOVE T1,NWCORE## ;NO, USE THAT TO SETUP PAGTAB AND MEMTAB
MOVEM T1,NWCORE## ;SAVE LARGER AS MAX CORE WHICH CAN BE SET ON LINE
MOVS T1,NWCORE## ;GET AMOUNT OF MEMORY SYSTEM WILL SUPPORT
TLZE T1,-1 ;CHECK IF EXACTLY A MULTIPLE OF 256K
ADDI T1,1 ;NO, 1 MORE PAGE REQUIRED FOR PAGTAB
LSH T1,P2WLSH ;NUMBER OF WORDS FOR EACH OF PAGTAB AND MEMTAB
MOVEM T1,MMTSIZ ;SAVE SIZE OF MEMORY MANAGEMENT TABLES
IFE FTXMON,<
PUSH P,MONVFF## ;SAVE HIGHEST VIRTUAL ADDRESS USED
MOVEI T2,PAGTAB ;VIRTUAL ADDRESS TO ALLOCATE AT
MOVEM T2,MONVFF## ;MAP PAGES TO PAGTAB
MOVSI T2,(<PM.DCD>B2+PM.WRT+PM.PUB+PM.SWB) ;PAGE MAP BITS
SKIPN [M.CPU##-1] ;ONLY ONE CPU?
TLO T2,(PM.CSH) ;YES, MAKE IT CACHED
PUSHJ P,ONCMAR ;ALLOCATE AND MAP IN PAGTAB
MOVE T1,MMTSIZ ;NUMBER OF WORDS REQUIRED
MOVEI T2,PT2TAB ;VIRTUAL ADDRESS TO ALLOCATE AT
MOVEM T2,MONVFF## ;MAP PAGES TO PT2TAB
MOVSI T2,(<PM.DCD>B2+PM.WRT+PM.PUB+PM.SWB) ;PAGE MAP BITS
SKIPN [M.CPU##-1] ;ONLY ONE CPU?
TLO T2,(PM.CSH) ;YES, MAKE IT CACHED
PUSHJ P,ONCMAR ;ALLOCATE AND MAP IN PAGTAB
MOVE T1,MMTSIZ ;NUMBER OF WORDS REQUIRED
MOVEI T2,MEMTAB ;VIRTUAL ADDRESS TO ALLOCATE AT
MOVEM T2,MONVFF## ;MAP PAGES TO MEMTAB
MOVSI T2,(<PM.DCD>B2+PM.WRT+PM.PUB+PM.SWB) ;PAGE MAP BITS
SKIPN [M.CPU##-1] ;ONLY ONE CPU?
TLO T2,(PM.CSH) ;YES, MAKE IT CACHED
PUSHJ P,ONCMAR ;ALLOCATE AND MAP IN MEMTAB
POP P,MONVFF## ;PUT THINGS BACK
>
IFN FTXMON,<
XJRST [MCSEC1+.+1] ;ENTER SECTION ONE
MOVE T1,[EXP MS.MEM+PAGTAB] ;EXTENDED VIRTUAL ADDRESS OF PAGTAB
MOVE T2,T1 ;COPY IT
ADD T2,MMTSIZ ;CALCULATE FIRST FREE FOLLOWING PAGTAB
PUSHJ P,NZSCGT ;ALLOCATE SPACE FOR PAGTAB
MOVE T1,[EXP MS.MEM+PT2TAB] ;EXTENDED VIRTUAL ADDRESS OF PT2TAB
MOVE T2,T1 ;COPY IT
ADD T2,MMTSIZ ;CALCULATE FIRST FREE FOLLOWING PT2TAB
PUSHJ P,NZSCGT ;ALLOCATE SPACE FOR PT2TAB
MOVE T1,[EXP MS.MEM+MEMTAB] ;EXTENDED VIRTUAL ADDRESS OF MEMTAB
MOVE T2,MMTSIZ ;NUMBER OF WORDS REQUIRED
ADD T2,T1 ;CALCULATE FIRST FREE FOLLOWING MEMTAB
PUSHJ P,NZSCGT ;ALLOCATE SPACE FOR MEMTAB
MOVSI T1,-MEMPGS ;NUMBER OF PAGES USED BY TABLES
MOVSI T2,1 ;JUNK MAP SLOT ENTRY
MMTAL1: HRRZ T3,T1 ;GET PAGE NUMBER
ADD T3,[<MS.MAP+MMAPS+<<(MS.MEM)>*PAGSIZ>>+<MEMBEG/PAGSIZ>]
SKIPN (T3) ;PAGE IN USE?
MOVEM T2,(T3) ;RESERVE IT SO TABLES CAN BE EXPANDED
AOBJN T1,MMTAL1 ;LOOP FOR ALL PAGES
>; END IFN FTXMON
MOVE T1,MMTSIZ ;SIZE OF TABLES IN WORDS
IFE FTXMON,<
SETZM PAGTAB ;ZERO THE FIRST WORD OF PAGTAB
MOVE T2,[PAGTAB,,PAGTAB+1]
BLT T2,PAGTAB-1(T1) ;ZERO ALL OF PAGTAB
SETZM PT2TAB ;ZERO THE FIRST WORD OF PT2TAB
MOVE T2,[PT2TAB,,PT2TAB+1]
BLT T2,PT2TAB-1(T1) ;ZERO ALL OF PT2TAB
SETOM MEMTAB ;SET MEMTAB TO -1 SO THAT USE WITHOUT SETUP
MOVE T2,[MEMTAB,,MEMTAB+1] ;WILL LIKELY CAUSE A STOPCD
BLT T2,MEMTAB-1(T1) ;ZAP, ITS ALL - 1
>; END IFE FTXMON
IFN FTXMON,<
DMOVE T2,[EXP MS.MEM+PAGTAB,MS.MEM+PAGTAB+1] ;SET UP XBLT SOURCE/DEST
SUBI T1,1 ;DECREMENT SIZE OF TABLES (WORDS TO ZERO)
PUSH P,T1 ;SAVE IT
SETZM (T2) ;ZERO THE FIRST WORD OF PAGTAB
EXTEND T1,[XBLT] ;ZERO ALL OF PAGTAB
DMOVE T2,[EXP MS.MEM+PT2TAB,MS.MEM+PT2TAB+1] ;SET UP XBLT SOURCE/DEST
MOVE T1,(P) ;NUMBER OF WORDS TO ZERO
SETZM (T2) ;ZERO THE FIRST WORD OF PT2TAB
EXTEND T1,[XBLT] ;ZERO ALL OF PT2TAB
POP P,T1 ;NUMBER OF WORDS TO ZERO
DMOVE T2,[EXP MS.MEM+MEMTAB,MS.MEM+MEMTAB+1] ;SET UP XBLT SOURCE/DEST
SETOM (T2) ;SET MEMTAB TO -1 SO THAT USE WITHOUT SETUP
EXTEND T1,[XBLT] ; WILL LIKELY CAUSE A STOPCD
>; END IFN FTXMON
SUBTTL MARK AND LINK MEMORY MANAGEMENT TABLES
;STILL IN SECTION 1 IFN FTXMON
MMTINI: LDB T2,[POINT 14,LOWLIM##,26] ;GET NUMBER OF LOW SEGMENT PAGES
ADDI T2,1 ;SINCE LOWLIM IS THE HIGHEST ADDRESS
MOVSI T1,MONTRB ;BIT WHICH SAYS THIS PAGE CONTAINS THE MONITOR
MOVEI T3,1 ;STARTING AT PAGE 1,
SSX T3,MS.MEM ;PAGTAB SECTION
SETZB T4,PT2TAB-1(T3) ;FIRST PAGE IN PT2TAB
MMTIN1: HRRZM T3,PAGTAB-1(T3) ;TURN IT ON
HLLM T1,PAGTAB-1(T3) ;+ MONTRB
HRRZM T4,PT2TAB(T3) ;SET UP BACKWARD LINK IN PT2TAB
AOS T4 ;NEXT PAGE
CAIE T2,1(T3) ;FOR ALL PAGES UP TO SYSSIZ
AOJA T3,MMTIN1 ; ..
HRRZM T3,LMPAG## ;SET LAST MONITOR PAGE SEEN
MOVEI T1,MONORG## ;WHERE TO START LOOKING
MOVE T4,MONVFF## ;FIRST FREE MONITOR VIRTUAL ADDRESS
SUBI T4,MONORG## ;MINUS MONITOR ORGIN
LSH T4,W2PLSH ;EQUALS NUMBER OF MONITOR HI SEG PAGES
PUSHJ P,SETMRB ;MARK PAGES OF MONITOR CODE AND DATA
IFN FTXMON,<
MOVEI T1,CSBORG## ;WHERE COMMON SUBROUTINES BEGIN
MOVE T4,CSBLEN## ;GET THE LENGTH
LSH T4,W2PLSH ;CONVERT TO PAGES
PUSHJ P,SETMRB ;MARK OFF THOSE PAGES
>; END IFN FTXMON
IFE FTXMON,<
MOVEI T1,PAGTAB ;MARK PAGTAB ITSELF AS TAKEN
MOVE T4,MMTSIZ ;NUMBER OF PAGES IN PAGTAB
LSH T4,W2PLSH
PUSHJ P,SETMRB ;MARK THE ENTRIES IN PAGTAB FOR PAGTAB
MOVEI T1,PT2TAB ;MARK PT2TAB
MOVE T4,MMTSIZ
LSH T4,W2PLSH
PUSHJ P,SETMRB ;MARK
MOVEI T1,MEMTAB ;AND MEMTAB TOO
MOVE T4,MMTSIZ ;SAME SIZE AS PAGTAB
LSH T4,W2PLSH
PUSHJ P,SETMRB
>; END IFE FTXMON
IFN FTXMON,<
MOVEI T4,HLGSNO-3 ;NUMBER OF SECTIONS TO CONSIDER
MOVEI T1,SECTAB+3 ;SECTION 0, 1, AND 37 ARE SPECIAL
ADD T1,.CPEPT## ;STARTING ADDRESS IN THE SECTION TABLE
PUSHJ P,SETMRP ;MARK PAGES AS IN USE BY THE MONITOR
MOVEI J,(MS.FMD) ;AS WAS STATED, SECTIONS 0 AND 1 ARE SPECIAL
MMTIN2: MOVE T1,.CPEPT## ;ADDRESS OF OUR PROCESS TABLE
ADDI T1,SECTAB(J) ;ADDRESS OF THE ENTRY IN THE SECTION TABLE
SKIPN T2,(T1) ;HAS THIS SECTION BEEN ALLOCATED?
JRST MMTIN3 ;NO, SAVE TIME
MOVE T1,.CPMAP## ;ADDRESS OF OUR MAP
MOVEM T2,.EUPMP/PAGSIZ(T1) ;SECTION MAP
CLRPT .EUPMP ;MAKE SECTION MAP ADDRESSABLE
MOVEI T1,.EUPMP ;VIRTUAL ADDRESS OF THE SECTION MAP
MOVEI T4,^D512 ;NUMBER OF PAGES IN A SECTION
CAIN J,(MS.HGH) ;EXTENDED HIGH SEGMENT?
MOVEI T4,HLCSAD##/PAGSIZ ;YES, DON'T LOOK AT EXEC VIRTUAL MAPPINGS
PUSHJ P,SETMRP ;MARK ALLOCATED PAGES IN THIS SECTION
MMTIN3: CAIGE J,HLGSNO-1 ;LOOKED AT ALL SECTIONS?
AOJA J,MMTIN2 ;NO, LOOP OVER ALL
>; END IFN FTXMON
PUSHJ P,BTAVAL## ;GET ADDRESS OF BOOTSTRAP VECTOR
JRST MMTIN6 ;BOOTSTRAP NOT AVAILABLE
MOVE T1,BOOTPA ;GET PHYSICAL ADDRESS OF BOOTSTRAP
LSH T1,W2PLSH ;GET STARTING PAGE NUMBER
HLRE T2,.BTSIZ(T2) ;GET -VE NUMBER OF PAGES IN BOOTSTRAP
MOVMS T2 ;GET NUMBER OF PAGES
PUSHJ P,SETCTB ;SET THE "PHYSICALLY CONTIGUOUS" BIT IN PAGTAB
MMTIN6: MOVE U,[POINT 1,NXMTAB##]
MOVE T1,MMTSIZ ;NUMBER OF WORDS IN PAGTAB
SETZB T2,T3 ;INITIALIZE
PUSH P,T3 ;SAVE BITS
MMTIN7: ILDB T4,U ;NEXT PAGE IN NXMTAB
JUMPE T4,MMTIN9 ;JUMP IF PAGE EXISTS
SKIPE @[IW MS.MEM,PAGTAB(T3)] ;IS THE PAGE FREE?
STOPCD .,STOP,MNM, ;++MONITOR IN NON-EXISTANT MEMORY
TLO T3,NXMBIT ;INDICATE NON-EXISTANT PAGE
TLZ T3,MONTRB
JUMPE T2,MMTIN8 ;JUMP IF NO PREDECESSOR
SSX T2,MS.MEM ;SET SECTION NUMBER IN INDEX
HLLM T3,(P) ;SAVE LATEST BITS
MOVEM T3,PAGTAB(T2) ;STORE THAT IN PAGTAB
MMTIN8: HRRZS T2,T3 ;PREDESSOR TO THIS PAGE
MMTIN9: CAIE T1,1(T3) ;LOOKED AT EVERY PAGE IN PAGTAB?
AOJA T3,MMTIN7 ;NO, LOOP OVER ALL PAGES
POP P,T4 ;RESTORE BITS
SSX T2,MS.MEM ;SECTION NUMBER
TRNE T2,-1 ;ANY NON-EXISTANT PAGES AT ALL
HLLZM T4,PAGTAB(T2) ;YES, INDICATE THE LAST ONE
IFN FTKL10,<
CAIN T1,CORBLK## ;4 MW OF MEMORY?
SKIPE @[IW MS.MEM,PAGTAB(T3)] ;AND IS LAST PAGE FREE?
JRST MMIN9A ;NOT 4 MW OR LAST PAGE IN USE
HRR T4,T3 ;LINK IN THIS NXM PAGE IF PREDECESSOR EXISTS
TRNE T2,-1
MOVEM T4,PAGTAB(T2)
TLO T4,NXMBIT ;MARK LAST PAGE AS NON-EXISTANT BECAUSE
HLLZM T4,@[IW MS.MEM,PAGTAB(T3)] ; RH20'S CAUSE PARITY ERRORS WHEN
SETOM T4 ; TRYING TO USE LAST PHYSICAL QUADWORD IN 4 MW
DPB T4,U ;MARK IN NXMTAB
LSH T3,P2WLSH ;MAKE MEMSIZ REFLECT THE CHANGE
MOVEM T3,MEMSIZ##
MMIN9A:
>; END IFN FTKL10
LDB T1,[POINT 14,MEMSIZ##,26]
MOVEI T1,PAGTAB-1(T1) ;HIGHEST PAGE IN THE MONITOR - 1
SSX T1,MS.MEM ;PAGTAB SECTION
MOVEM T1,CORLST## ;HIGHEST PAGE IN PAGTAB
MOVEI T1,1000 ;START FREE LIST AT 256K
SSX T1,MS.MEM ;SET PAGTAB SECTION
SETZ T2, ;NO PREDECESSOR
SSX T2,MS.MEM ;SET PAGTAB SECTION
SETZ T3, ;NO FREE PAGES SEEN YET
MOVE T4,MMTSIZ ;SET UP A LOOP COUNTER
SUBI T4,1000 ;WE SKIPPED THE FIRST 1000 PAGES
SETO P1, ;MARK FIRST PASS THROUGH PAGTAB
MMIN10: SKIPE PAGTAB(T1) ;IS THIS PAGE FREE?
JRST MMIN13 ;NO
TRNE T2,-1 ;FIRST FREE PAGE?
JRST MMIN11 ;NO
HRRZM T1,PAGPTR## ;YES, STORE ORGIN OF THE FREE CORE LIST
SETZM PT2TAB(T1) ;INIT TAIL OF LIST
JRST MMIN12 ;CONTINUE
MMIN11: PUSH P,T1 ;SAVE PAGTAB POINTER
HRLI T1,FREPAG ;INDICATE A FREE PAGE
MOVEM T1,PAGTAB(T2) ;STORE THAT IN PAGTAB
SSX T1,MS.MEM
HRRZM T2,PT2TAB(T1) ;SET BACKWARDS LINK
POP P,T1 ;RESTORE PAGTAB POINTER
MMIN12: MOVE T2,T1 ;SAVE PREDECESSOR
ADDI T3,1 ;NEXT PAGE
MMIN13: SOSLE T4 ;LOOKED AT ALL PAGES IN PAGTAB?
AOJA T1,MMIN10 ;NO
AOJN P1,MMIN14 ;JUMP IF WE'VE MADE TWO PASSES THROUGH PAGTAB
SETZ T1, ;START OVER AT THE BEGINNING
SSX T1,MS.MEM ;SET PAGTAB SECTION
MOVEI T4,1000 ;JUST LOOK AT FIRST 1000 PAGES
JRST MMIN10 ;NOW DO IT AGAIN
MMIN14: MOVSI T1,FREPAG ;LAST FREE PAGE
HLLZM T1,PAGTAB(T2) ;TERMINATE LINKED LIST OF FREE PAGES
MOVEM T3,BIGHOL## ;STORE THE NUMBER OF EXISTANT PHYSICAL PAGES
MOVEM T3,CORTAL## ; OF USER CORE SEEN
MOVEM T3,USRCOR## ;TOTAL AMOUNT OF USER CORE
LSH T3,P2WLSH ;CONVERT TO NUMBER OF WORDS
MOVEM T3,MAXMAX## ;MAX CORMAX CAN BE SET TO
MOVE T2,T3
SUBI T2,NWMCP+PAGSIZ
MOVEM T2,RMCMAX## ;REAL MAXIMUM CORMAX
HRRZ T1,CORLIM## ;MAXIMUM NUMBER OF PAGES ALLOWED A SINGLE
; USER (MONGEN SPECIFIED)
LSH T1,P2WLSH ;CONVERT TO NUMBER OF WORDS
CAMGE T1,T3 ;.GE. THE NUMBER OF PAGES AVAILABLE TO USERS?
MOVE T3,T1 ;NO, MAXIMUM AVAILABLE TO USERS
CAMLE T3,T2
MOVE T3,T2
MOVEM T3,CORMAX## ;NO ONE CAN GET LARGER THAN THIS (HOPEFULLY)
IFN FTXMON,<
;NOW ZERO OUT THE SECTION ENTRIES FOR WHICH NZS CORE CANNOT BE ALLOCATED
SETZM NZSFCH##+<(MCSEC1)>
SETZM NZSFCH##+<(MS.HGH)>
SETZM NZSFCH##+<(MS.SNP)>
SETZM NZSFCH##+<(MS.MAP)>
XJRST [MCSEC0+.+1] ;BACK INTO SECTION 0
> ;END IFN FTXMON
PUSHJ P,RSTDEF ;RESET DEFAULT TIMEOUT VALUE, ETC. FOR INITIAL
;PROMPTS WHICH WE WANT TO TIMEOUT IF THE
;OPERATOR FELL ASLEEP.
SUBTTL CHECK AND ASK ABOUT OFF-LINE CPUS
;ROUTINE TO CHECK IF A CPU IS OFF-LINE, AND ASK THE OPERATOR IF
;IT SHOULD BE RUNNING OR NOT, THEN GIVE THEM A CHANCE TO START IT.
ASKCPU:
IFN FTMP,<
MOVEI P1,.C0CDB## ;START WITH CPU0
SETZ P2, ;INIT COUNT OF NON-RUNNING CPUS
ASKCP1: MOVE T1,.CPCPN##-.CPCDB##(P1) ;GET CPU NUMBER
CAMN T1,.CPCPN## ;IS IT ME?
JRST ASKCP2 ;YES
XCTCPU (CPN,CPOPJ1##) ;TRY TO WAKE HIM OUT OF HIS AC LOOP
AOSA P2 ;FAILED, COUNT ONE NOT RUNNING
JRST ASKCP2 ;SUCCEEDED
PUSHJ P,PRSSET ;SET UP SPECIAL BUFFER, .CPTOA, ETC.
PUSH P,T1 ;SAVE OLD CHARACTER TYPER
MOVEI T1,[ASCIZ /% /] ;STARTING TEXT
PUSHJ P,CONMES ;PRINT IT
MOVE T2,.CPLOG##-.CPCDB##(P1) ;GET CPU NAME
PUSHJ P,PRNAME## ;PUT IN MESSAGE
MOVEI T1,[ASCIZ/ #/]
PUSHJ P,CONMES## ;TYPE TEXT
MOVE T1,.CPASN##-.CPCDB##(P1) ;GET SERIAL NUMBER
PUSHJ P,PRTDIG## ;TYPE IT
MOVEI T1,[ASCIZ / is not running. Set CPU status/]
PUSHJ P,CONMES## ;PRINT TEXT
POP P,.CPTOA## ;RESTORE CHARACTER STICKER
MOVEI T1,[ASCIZ //] ;NULL TEXT
CAIN P2,1 ;FIRST TIME THROUGH?
PUSHJ P,CONOUT ;YES--START WITH A CRLF
MOVEI T1,TXTBUF ;POINT TO PROMPT STRING
MOVE T2,['DOWN '] ;DEFAULT
MOVE T3,[-2,,ASKCPT] ;TABLE OF RESPONSES
PUSHJ P,PRSKEY ;PROMPT AND FETCH ANSWER
JFCL ;SHOULDN'T HAPPEN
JUMPN T1,ASKCP1 ;CHECK AGAIN IF "UP" WAS REQUESTED
MOVSI T1,(CR.RMV!CR.DET!CR.NRN) ;GET THE BITS
IORM T1,.CPRUN##-.CPCDB##(P1) ;SET IN THE RUNNABILITY WORD
SOS NCPRUN## ;COUNT DOWN RUNNABLE CPUS
ASKCP2: HLRZ P1,.CPCDB##-.CPCDB##(P1) ;GET NEXT CDB
JUMPN P1,ASKCP1 ;LOOP IF ANOTHER CPU TO CHECK
JRST CLRCCB ;ONWARD
ASKCPT: SIXBIT /DOWN/
SIXBIT /UP/
>; END IFN FTMP
SUBTTL CLEAR CACHE BITS FOR LOW SEGMENT PAGES
CLRCCB:
IFN FTXMON,<XJRST [MCSEC1+.+1]> ;GET INTO SECTION 1 FOR PAGTAB REFS
IFN FTMP,<
SKIPG [M.CPU##-1] ;MORE THAN ONE CPU?
JRST CLRCC3 ;NO, TURN OFF CACHE FOR A FEW PAGES
SETZ T1, ;ON 1088 SYSTEMS, MUST TURN OFF
MOVEI T2,CSBORG##-1 ; CACHE FOR ENTIRE LOWSEG
PUSHJ P,CCTRNG ;CLEAR
MOVEI T1,CSHFIR## ;START UP INTERRUPT LEVEL PDL'S AND STUFF
MOVEI T2,CSHLAS## ;CAN CACHE ALL OF THAT
PUSHJ P,CSBRNG ;SINCE NOT REALLY SHARED BETWEEN CPUS
IFE FTXMON,<
MOVE T2,MMTSIZ ;SIZE OF MEMORY MANAGEMENT TABLES
MOVEI T1,PAGTAB ;START OF PAGTAB
ADDI T2,-1(T1) ;END OF PAGTAB
PUSHJ P,CCTRNG ;CLEAR CACHE BITS FOR PAGTAB
MOVE T2,MMTSIZ ;NUMBER OF WORDS AGAIN
MOVEI T1,MEMTAB ;START OF MEMTAB
ADDI T2,-1(T1) ;END OF MEMTAB
PUSHJ P,CCTRNG ;CLEAR CACHE BITS FOR MEMTAB
>; END IFE FTXMON
IFN FTXMON,<
MOVE J,.CPEPT## ;GET EPT ADDRESS
ADDI J,<(MS.FMD)>+1 ;START AT FIRST REAL DATA SECTION
CLRCC1: SKIPE T1,SECTAB(J) ;GET SECTION MAP POINTER
TLNN T1,(PM.CSH) ;ALLOW FOR UNCACHED SECTION
JRST CLRCC2 ;SKIP THIS SECTION
MOVE T2,.CPMAP## ;GET ADDRESS OF S0 MAP
MOVEM T1,.EUPMP/PAGSIZ(T2) ;MAKE SECTION MAP VISIBLE VIA .EUPMP
CLRPT .EUPMP ;MAKE NEW MAPPING VISIBLE
PUSHJ P,CCTRNS ;MARK PAGES
CLRCC2: MOVE T1,.CPEPT## ;GET EPT ADDRESS
CAIGE J,MXSECN-1(T1) ;DONE ALL POSSIBLE SECTIONS?
AOJA J,CLRCC1 ;NO, LOOP FOR MORE
>; END IFN FTXMON
MOVEI T1,OUCHTB## ;OUCHTB MUST BE UNCACHED
MOVEI T2,OUCHTB##+7
PUSHJ P,CCTRNG
CLRCC3:
>; END IFN FTMP
MOVSI T1,(ST%LSC) ;LOW SEG IS CACHED BIT
ANDCAM T1,CNFST2## ;INITIALLY CLEAR LOW SEG IS CACHED BIT
MOVE T2,NCPRUN## ;NUMBER OF RUNNABLE CPUS
CAIN T2,1 ;ONLY 1 CPU?
IORM T1,CNFST2## ;YES, WE CACHED LOW SEGMENT
IFN FTKL10,<
SETZ P1, ;CLEAR LTINIT INDEX
CLRCC4: SKIPN T1,LTINIT##(P1) ;LTINIT ENDS WITH A ZERO
JRST CLRCC5 ;DONE
HLRZ T2,T1 ;GET NUMBER OF 4 WORD BLOCKS
LSH T2,2 ;MAKE IT NUMBER OF WORDS
ADDI T2,-1(T1) ;GET END ADDRESS OF THIS CHUNK
HRRZS T1 ;CLEAR LEFT HALF FOR CCBRNG
PUSHJ P,CCBRNG ;CLEAR CACHE BITS IN EXEC MAP
AOJA P1,CLRCC4 ;AND GET NEXT ENTRY IN LTINIT
CLRCC5: MOVEI T1,DLXFST## ;CLEAR OUT CACHE BITS FOR DC75
MOVEI T2,DLXLST##
CAIN T1,(T2) ;ANY DL10 WINDOWS DEFINED
JRST CLRCC6 ;NO, DON'T BOTHER
PUSHJ P,CCBRNG
MOVEI T1,.C0UPT## ;DC76 LOOKS AT UPTIME FOR CPU0
MOVE T2,T1 ;UNCACHE JUST THIS
PUSHJ P,CCBRNG ;CLEAR OUT CACHE FOR UPTIME
MOVEI T1,.CPUPT## ;UNCACHE THE OTHER VIRTUAL MAPPING TOO
MOVE T2,T1 ;ONLY THE ONE WORD
SKIPN .CPCPN## ;UNLESS WE'RE NOT CPU #0.
PUSHJ P,CCBRNG ; (ONLY PLACE A DC76 CAN BE).
CLRCC6:
>; END IFN FTKL10
IFN FTKS10,< ;ONLY KS-10'S HAVE KMC/DUP-11S
MOVEI T1,KDLFST## ;GET THE ADDRESS OF THE FIRST KDL PAGE
MOVEI T2,KDLLST## ;GET ADDR OF LAST WORD OF THE LAST
CAIE T1,(T2) ;IF ANY KDL PAGES ARE DEFINED, THEN
PUSHJ P,CCBRNG ; MAKE SURE THAT THEY ARE UNCACHED.
>; END IFN FTKS10
REPEAT 0,<
SKIPL DEBUGF## ;IF DEBUGGING WITH EDDT
JRST CLRCC7 ;NO-DONT BOTHER
MOVEI T1,DDT## ;CLEAR THE CACHE BITS FOR EDDT
MOVEI T2,DDTEND## ;TO DDTEND, SYMBOL TABLE IS NEVER WRITTEN
PUSHJ P,CCBRNG
;THE ABOVE CODE, IF ALLOWED TO ASSEMBLE (PUT ";" IN FRONT OF THE REPEAT
;AND THE CLOSING ANGLE BRACKET ABOVE) WILL KEEP DDT OUT OF THE CACHE. THIS IS HANDY IF YOU
;ARE DEBUGGING MONITOR PORTIONS WHICH HANDLE CACHE!!!
CLRCC7: MOVEI T1,APRPAR## ;KEEP THE APR PARITY RECOVERY CODE
MOVEI T2,APPCP2## ;OUT OF THE CACHE UNTIL
;THE CACHE HAS BEEN SWEPT BACK TO CORE
;THIS WILL CLOSE DOWN (BUT NOT SHUT) THE WINDOW
;OF RECURSIVE FAILURES
PUSHJ P,CCBRNG ;AND SHOULD IMPROVE RECOVERY CHANCES
>;END REPEAT 0
MOVE T1,LOWLIM## ;NOW CLEAR CACHE BITS FROM
ADDI T1,1 ; LOWLIM+1 (WHERE SYSSIZ WINDS UP)
MOVEI T2,CSBORG##-1 ; TO END OF LOW SEG FOR LOCK/REAL TIME
CAMG T1,T2
PUSHJ P,CCBRNG
IFN FTXMON,<XJRST [MCSEC0+.+1]> ;RETURN TO SECTION 0
SUBTTL ALLOCATE AND INITIALIZE SCA
SCAINI:
IFN FTSCA,<
SKIPN [SCASIZ##] ;ANY SCA FREE POOL?
JRST NOSCA ;NO, NO SECTION MAP OR BUFFERS NEEDED
IFN FTXMON,<
MOVEI T1,(MS.SCA) ;SECTION NUMBER FOR SCA STUFF
MOVEI T2,SCASIZ## ;SIZE OF THE POOL
PUSHJ P,GFWNZN## ;ALLOCATE THE SPACE
HALT . ;*** FOR NOW
MOVEM T1,SCALOC## ;SAVE ADDRESS OF FREE POOL
>; END IFN FTXMON
PUSHJ P,BHDINI## ;INITIALIZE BUFFER HEADERS AND DESCRIPTORS
MOVE T1,BHDADR## ;ADDRESS OF BUFFER HEADER DESCRIPTOR AREA
LSH T1,W2PLSH ;GET STARTING PAGE NUMBER
MOVE T2,BHDPGS## ;GET NUMBER OF PAGES
PUSHJ P,SETCTB ;SET THE "PHYSICALLY CONTIGUOUS" BIT IN PAGTAB
MOVE T1,BSDADR## ;ADDRESS OF BUFFER SEGMENT DESCRIPTOR AREA
LSH T1,W2PLSH ;GET STARTING PAGE NUMBER
MOVE T2,BSDPGS## ;GET NUMBER OF PAGES
PUSHJ P,SETCTB ;SET THE "PHYSICALLY CONTIGUOUS" BIT IN PAGTAB
PUSHJ P,SC.INI## ;INITIALIZE THE SCA PROTOCOL MODULE
NOSCA:
>; END IFN FTSCA
IFN FTENET,<
ETHSTR:
IFN FTKL10,<PUSHJ P,KNISYS##> ;INIT KLNI BIT MAPPED CORE
PUSHJ P,ETHINI## ;INITIALIZE ETHERNET DRIVER
> ;END IFN FTENET
SUBTTL ASK REASON FOR RELOAD
;ASK OPERATOR REASON FOR RELOAD
;ANSWER WILL BE PUT IN LOG FILE DAEMON
;ALONG WITH ARBITRARY OPERATOR COMMENT, IF ANY.
;ALLOW UNIQUE ABBREVIATION
WHYLOP: SETZM WHYTXT## ;CLEAR OUT AREA FOR OPERATOR COMMENT
MOVE T1,[XWD WHYTXT##,WHYTXT##+1]
BLT T1,WHYTXT##+WHYSIZ##-1
SKIPL DEBUGF## ;DEBUGGING STAND-ALONE?
JRST WHYLP1 ;NO,
MOVSI T1,'SA ' ;STAND ALONE CODE
MOVEM T1,WHYCOD## ;FOR DAEMON
JRST WHYLP7 ;GO FINISH UP
WHYLP1: MOVE T1,CRSWHY ;GET STOPCD CHECKSUM FROM PREVIOUS LOAD
JUMPE T1,WHYLP2 ;JUMP IF NONE
PUSHJ P,CHKDCS ;CHECK DATE/TIME CHECKSUM
JRST WHYLP2 ; IF PINK CRASH
MOVEM T1,WHYCOD## ;AND STORE AS REASON FOR RELOAD
JRST WHYLP7 ;SKIP QUESTION
WHYLP2: MOVE T1,DEFSP ;GET VIRGIN POINTER
MOVEM T1,DEFPTR ;RESET IT
MOVEI T1,[ASCIZ /OTHER ;Operator did not answer/]
PUSHJ P,DEFTXT ;STORE IN DEFAULT BUFFER
MOVE T1,DEFSP ;INITIAL STRING POINTER AGAIN
MOVEM T1,DEFPTR ;RESET FOR TIMEOUT
MOVEI T1,[ASCIZ /Why reload/]
SETZ T2, ;NO DEFAULT
PUSHJ P,PRSSIX ;PROMPT AND FETCH ANSWER
JUMPE T1,[PUSHJ P,WHELP ;GIVE SHORT HELP
JRST WHYLOP] ;AND TRY AGAIN
MOVE T2,T1 ;COPY TO A BETTER AC
MOVE T1,[-1,,['HELP ']] ;SHORT TABLE
PUSHJ P,FNDNAM## ;DID THE OPERATOR ASK FOR HELP?
JRST WHYLP3 ;NO, MAYBE A REAL ANSWER
PUSH P,OPTPTR ;SAVE COMMAND POINTER
PUSH P,OPTHLP ;AND COMMAND HELP TEXT
PUSH P,SWTPTR ;NO SWITCHES
MOVE T1,[-WHYLEN,,WHYTAB] ;WHY RELOAD COMMAND POINTER
MOVEM T1,OPTPTR
MOVEI T1,WHYHLP ;WHY RELOAD HELP TEXT
MOVEM T1,OPTHLP
SETZM SWTPTR ;NO SWITCHES
PUSHJ P,.HELP ;PROCESS AS A HELP COMMAND
JFCL ;FOOL
POP P,SWTPTR ;RESTORE
POP P,OPTHLP ;...
POP P,OPTPTR ;ONE MORE
JRST WHYLOP ;TRY AGAIN
WHYLP3: MOVE T1,[-WHYLEN,,WHYTAB] ;POINT TO TABLE
PUSHJ P,FNDNAM## ;LOOKUP ABBREV.
JRST [PUSHJ P,WHELP ;GIVE SHORT HELP
JRST WHYLOP] ;AND TRY AGAIN
MOVE T1,WHYTAB(T1) ; GET UNABBREVIATED SIXBIT CODE
MOVEM T1,WHYCOD## ;AND STORE IN GETTAB FOR DAEMON
MOVE P1,SAWCMT ;GET THE COMMENT FLAG
JUMPN P1,WHYLP4 ;GO IF MORE THAN JUST THE "WHY RELOAD" REASON
CAME T1,['OTHER '] ;IF END OF LINE AND RESPONSE WAS OTHER,
JRST WHYLP7 ; TELL HIM THAT OTHER REQUIRES A COMMENT
MOVEI T1,[ASCIZ /% OTHER requires a comment/]
PUSHJ P,CONOUT ;WARN OPERATOR
JRST WHYLOP ;GO BACK AND ASK WHY RELOAD AGAIN
;HERE TO GET OPERATOR COMMENT AND STORE IN CRASH ACS
WHYLP4: MOVEI P2,<WHYSIZ##*5>-1 ;NUMBER OF ASCIZ CHARACTERS
MOVE P1,[POINT 7,WHYTXT##] ;BYTE POINTER FOR WHERE TO STORE
WHYLP5: PUSHJ P,COMTYI## ;GET NEXT CHARACTER (EVEN IF ;)
JUMPE T3,WHYLP6 ;END OF STRING? (GETLIN STORES NULL)
CAIL T3,12 ;NO, END OF LINE CHAR?
CAILE T3,15 ;"
SKIPA ;NO
JRST WHYLP6 ;YES, DO NOT STORE, JUST GO STORE NULL
SOJLE P2,WHYLP6 ;QUIT IF NO MORE ROOM LEFT IN BLOCK
IDPB T3,P1 ;STILL ROOM, STORE ASCIZ CHARACTER
JRST WHYLP5 ;GO GET MORE
;HERE WHEN FINISHED COPYING OPERATOR COMMENT TO CRASH ACS
WHYLP6: MOVEI T3,0 ;NULL
IDPB T3,P1 ;STORE ON END SO ASCIZ
WHYLP7: PUSHJ P,CHGDAT ;GET DATE/TIME
JFCL ;ALWAYS SKIPS
JRST STACON ;GO CRANK UP AUTCON
WHELP: PUSH P,OPTPTR ;SAVE COMMAND POINTER
MOVE T1,[-WHYLEN,,WHYTAB] ;AOBJN POINTER TO OPTIONS
MOVEM T1,OPTPTR ;SAVE TEMPORARILY
PUSHJ P,SHELP ;GIVE SHORT HELP
POP P,OPTPTR ;RESTORE COMMAND POINTER
POPJ P, ;RETURN
;LIST OF POSSIBLE WHY RELOAD ANSWERS (CAN BE ABBREVIATED)
; ORDER IS IMPORTANT. OPERATOR SHOULD ANSWER THE EARLIEST ONE
; IN TABLE WHICH APPLIES (WHEN MORE THAN ONE DOES)
DEFINE OPTINS,<
;;PREVIOUS SYSTEM PROBLEM:
X (OPR,<Operator error>)
X (PARITY,<Memory parity errors>)
X (POWER,<Power failure>)
X (STATIC,<Static electricity>)
X (HARDWA,<Hardware failure>)
X (NXM,<Non-existant memory errors>)
X (HALT,<Monitor halted>)
X (LOOP,<Monitor looping>)
X (HUNG,<Monitor hung>)
;;PREVIOUS NON-TIMESHARED USE OF SYSTEM:
X (PM,<Preventive maintenance>)
X (CM,<Corrective maintenance>)
X (SA,<Stand alone>)
;;DIFFERENT MONITORS
X (NEW,<Loading new monitor>)
X (SCHED,<Scheduled monitor change>)
;;OPERATOR DOESN'T KNOW OR WON'T TELL US
X (OTHER,<None of the above>)
> ;END DEFINE OPTINS
DEFINE X (NAME,TEXT),<EXP <SIXBIT /NAME/>>
WHYTAB: OPTINS
WHYLEN==.-WHYTAB ;LENGTH
DEFINE X (NAME,TEXT),<IFIW [ASCIZ /TEXT/]>
WHYHLP: OPTINS
SUBTTL CONFIGURE DEVICES
STACON: PUSHJ P,AUTCPU## ;CALL AUTCON ON THE BOOT CPU
IFN FTMP,<
SKIPN [M.CPU##-1] ;MORE THAN ONE CPU IN SYSTEM?
JRST STACN3 ;NOPE
MOVEI P1,.C0CDB## ;START WITH CPU0
SETZ P2, ;CLEAR MASK OF CPUS
STACN1: MOVE T1,.CPCPN##-.CPCDB##(P1) ;GET CPU NUMBER
CAME T1,.CPCPN## ;IS IT ME?
XCTCPU (CPN,AUTCPU##,XC.ASY) ;NO--FIRE UP AUTCON ON THIS CPU
HLRZ P1,.CPCDB##-.CPCDB##(P1) ;NEXT CDB
JUMPN P1,STACN1 ;LOOP IF ANOTHER CPU TO CHECK
MOVEI T2,-1 ;TIME TO WASTE
SOJG T2,. ;GIVE THE OTHER CPUS A CHANCE TO START
MOVE T2,CPUTIM ;WAIT AS LONG AS XCTCPU WOULD
STACN2: SETZ T3, ;CLEAR A FLAG
HRROI T1,[SKIPL .CPATO##-.CPCDB##(P1) ;CPU STILL CONFIGURING?
SETO T3, ;YES
POPJ P,]
PUSHJ P,CPUAPP## ;MAKE SURE ALL CPU'S ARE THRU AUTCON
SKIPE T3 ; SINCE BOOT'S MAP MIGHT BE CHANGED
SOJGE T2,STACN2 ;TIME OUT IN CASE SOMEONE'S NOT RUNNING
SKIPGE T2 ;DID IT TIME OUT?
STOPCD .,DEBUG,AUTTTL, ;++AUTCON TOOK TOO LONG
STACN3:
>; END IFN FTMP
SUBTTL SET UP AND LINK DDBS
GETOPT: PUSHJ P,SLCLDS ;SET UP LOW CORE LOCATIONS
IFN FTCIDSK,<
MOVE T1,APRTIM ;STORE TIME STAMP
MOVEM T1,BNDBEG## ; FOR BINDING LOGIC
>; END IFN FTCIDSK
CONO PI,PI.ON+DSKPIN## ;START GETTING DISK INTERRUPTS
PUSHJ P,AUTSYS## ;CREATE SYSINI DDB LINKAGES
PUSHJ P,XTCLNK## ;CREATE AND LINKUP DA28 KDBS AND UDBS
PUSHJ P,FILMEM## ;SETUP FILSER CORE BLOCKS
PUSHJ P,SETFPT ;SET UP FREPTR AND FREE CORE POOL
IFN FTCIDSK,<PUSHJ P,ONCBND##> ;BIND CI DISKS
; JRST STRTUP ;GO TO STARTUP OPTION
SUBTTL ASK FOR START-UP OPTION
;TYPING ESCAPE DURING ONCE WILL BRING YOU BACK HERE TO TRY AGAIN.
STRTUP::MOVE P,.CPNPD## ;RESET STACK INCASE OF RESTART
PUSHJ P,KONCE## ;KILL OFF ONCE-ONLY DATA STRUCTURES
PUSHJ P,RDDISK## ;READ THE DISKS
JFCL ;IGNORE ERRORS
SETZM GOFLAG ;NO ONE'S TYPED "GO" YET
SKIPL DEBUGF## ;DEBUGGING?
JRST STRTU1 ;NO--NORMAL STARTUP
SKIPL ALTMFL ;BUT WAS ALTMODE TYPED?
JRST STRTU6 ;SKIP THE VERBIAGE
STRTU1: SETZM ALTMFL ;CLEAR FLAG THAT SAYS ALTMODE WAS TYPED
SETZM ONCTCH ;ALLOW NO 'TYPEAHEAD' THROUGH PRSCON
SKIPE GOFLAG ;READY TO START TIMESHARING?
JRST STRTU7 ;YES
SETZM IGNORE ;NO--CLEAR /NOERROR FLAG
MOVE T1,DEFSP ;GET VIRGIN POINTER
MOVEM T1,DEFPTR ;RESET IT
MOVEI T1,[ASCIZ /GO ;Operator did not answer/]
PUSHJ P,DEFTXT ;STORE IN DEFAULT BUFFER
MOVE T1,DEFSP ;INITIAL STRING POINTER AGAIN
MOVEM T1,DEFPTR ;RESET FOR TIMEOUT
MOVEI T1,[ASCIZ /Startup option/]
SETZ T2, ;NO DEFAULT
PUSHJ P,PRSSIX ;PROMPT AND FETCH ANSWER
JUMPE T1,[PUSHJ P,SHELP ;GIVE SHORT HELP
JRST STRTU1] ;AND TRY AGAIN
PUSHJ P,ALTM ;BACK TO STARTUP OPTION IF ALTMODE TYPED
MOVE T2,T1 ;COPY ANSWER FOR FNDNAM
;PROCESS SWITCHES
STRTU2: MOVE T3,ONCTCH ;RESTORE DELIMITER
CAIE T3,"/" ;SWITCH COMING?
JRST STRTU3 ;NO, CHECK OPTION
PUSH P,T2 ;SAVE OPTION
PUSHJ P,CTEXT## ;PICK UP SWITCH NAME
MOVE T1,SWTPTR ;GET POINTER TO SWITCH NAMES
PUSHJ P,FNDNAM## ;LOOKUP NAME
JRST [PUSHJ P,SHELP ;GIVE SHORT HELP
JRST STRTU1] ;AND TRY AGAIN
ADD T1,SWTDSP ;INDEX INTO DISPATCH TABLE
PUSHJ P,@(T1) ;DO SOMETHING
JFCL ;IGNORE ERRORS
POP P,T2 ;RESTORE OPTION NAME
JRST STRTU2 ;SEE IF ANOTHER SWITCH COMING
;PROCESS COMMANDS
STRTU3: MOVE T1,[-1,,['HELP ']] ;SPECIAL HACK
PUSHJ P,FNDNAM## ;WAS "HELP" TYPED?
JRST STRTU4 ;NO
MOVEI T1,[IFIW .HELP] ;FAKE UP A HELP COMMAND
JRST STRTU5 ;AND GO PROCESS IT
STRTU4: MOVE T1,OPTPTR ;GET POINTER TO COMMAND NAMES
PUSHJ P,FNDNAM## ;LOOKUP NAME
JRST [PUSHJ P,SHELP ;GIVE SHORT HELP
JRST STRTU1] ;AND TRY AGAIN
MOVE T2,OPTPTR ;GET COMMAND TABLE AGAIN
ADDI T2,(T1) ;INDEX TO SPECIFIED COMMAND
MOVE T2,(T2) ;GET FULL COMMAND NAME
MOVEM T2,STOPTN## ;SAVE STARTUP OPTION FOR GETTAB
ADD T1,OPTDSP ;INDEX INTO DISPATCH TABLE
;COMMAND DISPATCH
STRTU5: HRLOI T2,777 ;A BIG NUMBER
MOVEM T2,OPRCNT ;SET FUTURE PARSER TIMEOUTS TO INFINITE
SETZM DEFALW ;INDICATE WE SAW SOME INPUT
PUSHJ P,@(T1) ;DO SOMETHING
JFCL ;IGNORE ERRORS
JRST STRTU1 ;LOOP BACK FOR MORE COMMANDS
;HERE TO START SYSTEM WHEN DEBUGGING
STRTU6: MOVE T1,['NOINIT'] ;SPECIAL HACK SO SCNSER
MOVEM T1,STOPTN## ; DOESN'T DRIVE US CRAZY
PUSHJ P,.NOINI ;MAKE IT LOOK LIKE "NOINITIA"
JFCL ;IGNORE ERRORS
;HERE WHEN DONE SCANNING COMMANDS AND SWITCHES
STRTU7: HRRZ T1,CRSSTS ;STATES BEFORE THE RELOAD
TRO T1,ST.NOP ;ASSUME NO OPR IN ATTENDANCE
SKIPGE DEFALW ;DID THE OPR ANSWER?
HRRM T1,STATES## ;NO, STORE STATES AS PREVIOUSLY SET BY OPR
SETZM CRSWHY ;SO WILL ASK "WHY RELOAD" NEXT TIME
SETZM GOFLAG ;CLEAR "GO" TO AVOID LOOPING ON ERRORS
PUSHJ P,VFCORE## ;VERIFY IN-CORE DISK DATA BASE
JRST [SKIPN IGNORE ;UNLESS /NOERROR,
JRST STRTU1 ;LET OPERATOR CORRECT ERRORS
JRST .+1] ;WRONG--CONTINUE IN BLIND FAITH
PUSHJ P,GOHOME## ;REWRITE HOME BLOCKS IF NECESSARY
PUSHJ P,FILMAN## ;DO ONCE-ONLY MANDATORY FILE SYSTEM SETUP
SKIPN .UONCE## ;USER-MODE?
SKIPN REFLAG## ;NO--AUTOMATIC "LOGIN" WANTED?
JRST STRTU8 ;THEN NO LOGIN OPTION
MOVE T1,FFAPPN## ;[OPR]
MOVEM T1,REFLAG## ;SET AS FREE LOGIN PPN
MOVEI T1,[ASCIZ /To automatically log in under /]
PUSHJ P,ICONM ;PRINT TEXT
MOVE T2,FFAPPN## ;GET [OPR]
PUSHJ P,PRTPPN## ;PRINT PPN
MOVEI T1,[ASCIZ / type "LOGIN"/]
PUSHJ P,CONMES## ;PRINT TEXT
PUSHJ P,CRLFOP ;APPEND A CRLF
STRTU8: PJRST PVQCK ;NOW START TIMESHARING
;SWITCH AND OPTION ACTION MACROS
;START-UP OPTIONS
DEFINE OPTINS,<
X (CHANGE,.CHANG,<Change system parameters>)
X (DEFINE,.DEFIN,<Define structures and system lists>)
X (DESTROY,.DESTR##,<Dissolve all structures in the system>)
X (DISSOLVE,.DISSO##,<Dissolve a single structure>)
X (GO,.GO,<Start timesharing>)
X (NOINITIA,.NOINI,<Start timesharing without system initialization>)
X (REFRESH,.REFRE##,<Refresh selected structures>)
X (SHOW,.SHOW,<Display system parameters>)
>; END DEFINE OPTINS
;SWITCHES FOR START-UP OPTIONS
DEFINE SWTCHS,<
X (NOASL,NOASL,<Don't use preserved active swapping list>)
X (NOCOPY,NOCOPY,<Don't start CRSCPY>)
IFN FTKL10,<
X (NOPRIMARY,NOPRIM,<Start timesharing in secondary protocol>)
>;; END IFN FTKL10
X (NOSDL,NOSDL,<Don't use preserved system dump list>)
X (NOSSL,NOSSL,<Don't use preserved system search list>)
X (NOVALIDATE,NOVALI,<Don't require account validation>)
X (STANDALONE,STAND,<Start timesharing with SCHED 10 set>)
>; END DEFINE SWTCHS
;STARTUP OPTION COMMAND NAMES
DEFINE X (NAME,ADDR,HELP),<EXP <SIXBIT/NAME/>>
OPTTAB: OPTINS
OPTLEN==.-OPTTAB ;LENGTH OF START-UP OPTIONS TABLE
;STARTUP OPTION COMMAND DISPATCH
DEFINE X (NAME,ADDR,HELP),<IFIW ADDR>
OPTADR: OPTINS
;STARTUP OPTION COMMAND HELP TEXT
DEFINE X (NAME,ADDR,HELP),<IFIW [ASCIZ \'HELP\]>
OPTTXT: OPTINS
;LOCATIONS POKED BY USRONC WITH USER-MODE TABLE ADDRESSES
OPTPTR::-OPTLEN,,OPTTAB ;COMMAND TABLE
OPTDSP::IFIW OPTADR ;COMMAND DISPATCH TABLE
OPTHLP::IFIW OPTTXT ;COMMAND HELP TEXT
;STARTUP OPTION SWITCH NAMES
DEFINE X (NAME,ADDR,HELP),<EXP <SIXBIT /NAME/>>
SWTTAB: SWTCHS
SWTLEN==.-SWTTAB ;LENGTH OF SWITCH TABLE
;STARTUP OPTION SWITCH DISPATCH
DEFINE X (NAME,ADDR,HELP),<IFIW ADDR>
SWTADR: SWTCHS
;STARTUP OPTION SWITCH HELP TEXT
DEFINE X (NAME,ADDR,HELP),<IFIW [ASCIZ \'HELP\]>
SWTTXT: SWTCHS
;LOCATIONS POKED BY USRONC WITH USER-MODE TABLE ADDRESSES
SWTPTR::-SWTLEN,,SWTTAB ;SWITCH TABLE
SWTDSP::IFIW SWTADR ;SWITCH DISPATCH TABLE
SWTHLP::IFIW SWTTXT ;SWITCH HELP TEXT
SUBTTL STARTUP OPTION COMMANDS -- .CHANG - CHANGE
.CHANG::SETOM CHGFLG ;INDICATE CHANGE, NOT DEFINE
MOVEI T1,[ASCIZ /Change/] ;PROMPT
SETZ T2, ;NO DEFAULT KEYWORD
MOVE T3,CHGPTR ;TABLE OF LEGAL RESPONSES
PUSHJ P,PRSKEY ;FETCH A KEYWORD
JRST CPOPJ1## ;GUESS HE CHANGED HIS MIND
ADD T1,CHGDSP ;INDEX INTO THE CHANGE DISPATCH TABLE
JRST @(T1) ;GO DEFINE SOMETHING
DEFINE CHGOPT,<
X (ASL,CHGASL##)
X (DATE,CHGDAT)
X (NETWOR,CHGNET)
X (SDL,CHGSDL##)
X (SETS,CHGSET##)
X (SSL,CHGSSL##)
X (STRUCT,CHGSTR##)
X (UNIT,CHGUNI##)
> ;END DEFINE CHGOPT
DEFINE X (NAME,ADDR),<EXP <SIXBIT/NAME/>>
CHGTAB: CHGOPT
CHGLEN==.-CHGTAB
DEFINE X (NAME,ADDR),<IFIW ADDR>
CHGADR: CHGOPT
;USRONC REWRITES THESE LOCATIONS
CHGPTR::-CHGLEN,,CHGTAB
CHGDSP::IFIW CHGADR
;CHANGE DATE
CHGDAT: SETZM ONCTCH ;DEFEAT PRSCON
SETZM FETFLG ;ASSUME NO FE TIME
SKIPN .UONCE## ;USER MODE CAN'T ASK THE FRONT ENDS
PUSHJ P,GFETIM ;SEE IF FRONT END KNOWS TIME
JRST DATLP1 ;IT DOES NOT, TRY FOR LAST CRASH TIME
JRST DATLP2 ;IT DOES, USE IT FOR A DEFAULT
DATHLP: PUSHJ P,RSTDEF ;SOMETHING WENT WRONG, GIVE OPR TIME TO PONDER
SETZM FETFLG ;FORGET WHATEVER THE FE MAY HAVE TOLD US
SKIPA T1,[[ASCIZ /Please type today's date as MON-DD(-YY)
/]]
DATLP1: MOVEI T1,[ASCIZ /Date: /]
SETOM LOCSEC## ;NO TIME KNOWN YET
SETOM CRSDAY ;FAR FAR DISTANT PAST
PUSHJ P,CHKDCS ;CRASH CHECKSUM REASONABLE?
JRST ASKDAT ;NO, SO MUST ASK FOR DATE AND TIME
MOVE T2,T4 ;COPY DATE
ANDI T2,17 ;MASK OUT MONTH
MOVEM T2,LOCMON## ;STORE
MOVE T1,T4 ;COPY DATE AGAIN
LSH T1,-4 ;SHIFT OFF MONTH
MOVE T2,T1 ;COPY DATE
ANDI T2,37 ;MASK OUT DAY
MOVEM T2,LOCDAY## ;STORE IN COMMON
LSH T1,-5 ;SHIFT OFF DAY
ADDI T1,^D1970 ;ADD IN BASE
MOVEM T1,LOCYER## ;STORE
HRRZ T1,CRSDTM ;GET TIME
IDIVI T1,^D60*^D60 ;GET HOURS
IDIVI T2,^D60 ;GET MIN
MOVEM T1,LOCHOR## ;STORE HOURS
MOVEM T2,LOCMIN## ;STORE MIN
MOVEM T3,LOCSEC## ;STORE SECONDS
PUSHJ P,CHKMNT## ;SEE IF PASSED THROUGH MIDNIGHT WHILE RELOADING
CAIA ;SKIP
DATLP2: SETOM FETFLG ;GOT TIME FROM FE
SKIPGE DEFALW ;SEE IF ALREADY DEFAULTING
MOVMS FETFLG ;YES--REMEMBER THAT
PUSHJ P,THSDA## ;RECOMPUTE THSDAT
PUSHJ P,SUDATE## ;COMPUTE DATE TOO (FOR DOW PRINTING)
DATLP3: MOVE T1,THSDAT## ;GET THSDAT
MOVEM T1,CRSDAY ;SAVE FOR LATER
MOVE T1,DEFSP ;GET DEFAULT STRING POINTER
MOVEM T1,DEFPTR ;STORE AS POINTER
MOVE T1,LOCDAY## ;GET THE DAY
PUSHJ P,DECDEF ;STORE AS PART OF DEFAULT
MOVEI T1,"-" ;ADD A DASH
IDPB T1,DEFPTR ; ..
MOVE T1,LOCMON## ;GET MONTH
MOVEI T1,MONTHS-1(T1) ;POINT AT ASCII MNEMONIC PLUS "-" AT END
PUSHJ P,DEFTXT ;STUFF IT
MOVE T1,LOCYER## ;GET THE YEAR
PUSHJ P,DECDEF ;ADD THAT ON
SKIPN FETFLG ;GOT TIME FROM FE?
JRST DATLP4 ;NO
SETOM CRSDAY ;YES, FORGET CRASH TIME
SKIPA T1,[[ASCIZ / ;From FE clock/]]
DATLP4: MOVEI T1,[ASCIZ / ;From last crash/]
PUSHJ P,DEFTXT ;ADD TO DEFAULT
MOVEI T1,[ASCIZ /Date: /]
MOVEI T2,DEFBUF
SKIPN FETFLG ;TIME FROM FE?
SKIPA T3,OPRCNT ;NO, USE OPRCNT
MOVEI T3,^D5 ;YES, REDUCE WAIT TO 5 SECS
PUSHJ P,ASKDEF ;ASK QUESTION
JRST HAVDAT
JRST ASKDT1 ;GO PARSE THE ANSWER
;HERE WHEN WE MUST ASK THE OPERATOR THE DATE (PROMPT STRING IN T1)
ASKDAT: PUSHJ P,ICONM ;OUTPUT THE QUESTION
PUSHJ P,OPOUT ;PUSH OUTPUT OUT
PUSHJ P,GETLIN ;READ A LINE
JRST DATHLP ;GIVE THEM SOME HELP
ASKDT1: MOVEI T1,LOCYER## ;POINT AT YEAR/MONTH/DAY TRIPLET
PUSHJ P,GTDATE## ;GET DATE
JRST DATHLP ;ERROR
MOVE T2,LOCYER## ;GET THE YEAR THE OPERATOR CLAIMED
SUBI T2,^D1900 ;SUBTRACT BASE
CAMGE T2,ONCYER ;WAY OUT OF LINE?
JRST DATHLP ;YES, GIVE THEM SOME HELP
MOVE T1,LOCMON## ;NOW CHECK DAY ARG
SOS T1 ;INDEX INTO MONTAB
LDB T2,PMONTB## ;GET NUMBER OF DAYS (MINUS 1) THAT MONTH
AOS T2 ;MAKE DAYS IN THAT MONTH
SOJN T1,ASKDT2 ;JUMP IF NOT FEB
MOVE T1,LOCYER## ;LEAP YEAR?
TRNN T1,3
AOS T2 ;YES - 29 DAYS
ASKDT2: CAML T2,LOCDAY## ;CHECK DAY ARG
JRST HAVDAT ;OK
MOVEI T1,[ASCIZ/?Illegal day of month
/]
PUSHJ P,ICONM ;START MESSAGE
PUSHJ P,OPOUT ;PUSH OUTPUT OUT
JRST DATHLP ;GIVE THEM SOME HELP
HAVDAT: PUSHJ P,THSDA## ;COMPUTE & STORE THSDAT
PUSHJ P,SUDATE## ;COMPUTE DATE TOO (FOR DOW PRINTING)
MOVE T1,THSDAT## ;GET THSDAT
CAML T1,CRSDAY ;SPECIFIED DATE AFTER LAST CRASH?
JRST VALID ;YES, GO VALIDATE THE DATE
MOVEI T1,[ASCIZ /
%Specified date is prior to last crash.
Last crash date: /]
PUSHJ P,ICONM ;START MESSAGE
MOVEI T1,DEFBUF ;POINT AT THEIR RESPONSE
JRST VALID2 ;PRINT SUSPECT DATE AND ASK IF CORRECT
VALID: MOVE T1,ONCMON ;FORM 12 BIT DATE FOR COMPARISON
IMULI T1,^D31
MOVEM T1,CHKDAT
MOVE T1,ONCDAY
SUBI T1,1+^D31
ADDM T1,CHKDAT
MOVE T1,ONCYER
SUBI T1,^D64 ;ADJUST TO T=0
IMULI T1,^D12*^D31
ADD T1,CHKDAT
CAMLE T1,THSDAT## ;SPECIFIED DATE PRIOR TO SYSTEM CREATION DATE?
JRST VALID1 ;YES
SKIPE DTCKFL ;DATE OK, WANT TO VERIFY DATE/TIME ENTERED?
JRST VALID3 ;ASK OPR TO CONFIRM WHAT HE TYPED
JRST TIMLOP ;GO GET TIME
VALID1: MOVEI T1,[ASCIZ /
%Specified date is prior to monitor creation date.
Creation date: /]
PUSHJ P,ICONM ;QUESTION EARLY DATE
MOVEI T1,SYSDAT## ;POINT AT SYSTEM CREATION DATE
VALID2: PUSHJ P,CONMES## ;OUTPUT IT
PUSHJ P,OPOUT ;PUSH OUTPUT OUT
VALID3: MOVEI T1,[ASCIZ /
Specified date: /]
PUSHJ P,ICONM ;START MESSAGE
PUSHJ P,PRDOFW## ;PRINT DAY OF THE WEEK
PUSHJ P,PRSPC## ;SPACE OVER
PUSHJ P,PRDAYD## ;PRINT DATE AND TIME
PUSHJ P,OPOUT ;PUSH OUTPUT OUT
SKIPE FETFLG ;DID DATE/TIME COME FROM FE?
PUSHJ P,RSTDEF ;YES, GIVE OPR TIME TO DISLIKE
MOVEI T1,[ASCIZ /Is this correct/]
MOVSI T2,'YES' ;DEFAULT ANSWER
PUSHJ P,PRSYNQ ;GET YES/NO RESPONSE
JUMPE T1,DATHLP ;HE SAID "NO"
JRST TIMLOP ;HE LIKES IT ANYWAY
SUBTTL ASK FOR TIME OF DAY
TIMHLP: SETZM FETFLG ;FORGET ANY TIME FROM THE FE
PUSHJ P,RSTDEF ;GIVE OPR TIME TO PONDER
SKIPA T1,[[ASCIZ /Please type time as HHMMSS or HH:MM:SS
/]]
TIMLOP: MOVEI T1,[ASCIZ /Time: /]
SKIPGE LOCSEC## ;DO WE KNOW TIME
JRST ASKTIM ;NO--GO ASK FOR IT
MOVE T1,DEFSP ;SET UP BYTE POINTER TO DEFBUF
MOVEM T1,DEFPTR
MOVE T1,LOCHOR## ;SETUP DEFAULT
PUSHJ P,DECDEF ; ..
MOVEI T1,":"
IDPB T1,DEFPTR
MOVE T1,LOCMIN## ; ..
PUSHJ P,DECDEF ; ..
MOVEI T1,":"
IDPB T1,DEFPTR
MOVE T1,LOCSEC## ; ..
PUSHJ P,DECDEF ; ..
SKIPE FETFLG ;GOT TIME FROM FE?
SKIPA T1,[[ASCIZ / ;From FE clock/]]
MOVEI T1,[ASCIZ / ;From last crash or previous answer/]
PUSHJ P,DEFTXT ;ADD TO DEFAULT
MOVEI T1,[ASCIZ /Time: /]
MOVEI T2,DEFBUF
SKIPN FETFLG ;TIME FROM FE?
SKIPA T3,OPRCNT ;NO, USE OPRCNT
MOVEI T3,^D5 ;YES, REDUCE WAIT TO 5 SECS
PUSHJ P,ASKDEF ;GO ASK ABOUT TIME
JRST HAVTIM ;JUST A CR
JRST ASKTM1 ;GO PARSE TIME
ASKTIM: PUSHJ P,ICONM ;OUTPUT THE QUESTION
PUSHJ P,OPOUT ;PUSH OUTPUT OUT
PUSHJ P,GETLIN ;READ A LINE
JRST TIMHLP ;JUST A CR
ASKTM1: PUSHJ P,RDTIM## ;GET TIME OF DAY
JRST [PUSHJ P,ERRCRL## ;ISSUE CRLF AND ERROR MESSAGE
PUSHJ P,OPOUT ;PUSH OUTPUT OUT
JRST TIMHLP] ;LOOP BACK AND TRY AGAIN
IDIVI T1,^D60*^D60 ;T1:= HOURS
IDIVI T2,^D60 ;T2:= MINUTES, T3:= SECONDS
MOVEM T1,LOCHOR## ;SAVE HOURS
MOVEM T2,LOCMIN## ;SAVE MINUTES
MOVEM T3,LOCSEC## ;SAVE SECONDS
; PJRST HAVTIM ;GO COMPARE AGAINST LAST CRASH TIME
HAVTIM: MOVE T1,LOCHOR## ;GET HOURS
MOVE T2,LOCMIN## ;GET MINUTES
IMULI T1,^D60 ;CONVERT HOURS TO MINUTES
ADD T1,T2 ;MINUTES SINCE MIDNIGHT
IMUL T1,TICMIN## ;JIFFIES SINCE MIDNIGHT
MOVEM T1,TIME## ;TIME=JIFFIES SINCE MIDNIGHT
MOVE T1,LOCSEC## ;SECONDS INTO THIS MINUTE
IMUL T1,TICSEC## ;JIFFIES INTO THIS MINUTE
ADDB T1,TIME## ;TIME=JIFFIES SINCE MIDNIGHT
HRRZ T2,CRSDTM ;GET TIME OF DAY IN SECONDS AT LAST CRASH
SUBI T2,RLDTIM## ;SUBTRACT TIME REQUIRED FOR AUTO-RELOAD
IMUL T2,TICSEC## ;CONVERT SECONDS TO TICKS
MOVE T3,THSDAT## ;GET SPECIFIED DATE
CAMGE T1,T2 ;SPECIFIED TIME PRIOR TO CRASH TIME?
CAME T3,CRSDAY ;YES, IF DAY AND CRASH DAY MATCH, COMPLAIN
SKIPA ;TIME IS LEGAL, SEE IF OPR VERIFICATION REQ'D
JRST HAVTM1 ;INVALID TIME, COMPLAIN
SKIPE DTCKFL ;OPR NEED TO VERIFY TIME?
JRST HAVTM3 ;YES, CHECK IT OUT
JRST HAVTM5 ;NO, GOOD TIME, MOVE ONWARD
HAVTM1: SKIPE DTCKFL ;OPR NEED TO VERIFY TIME?
JRST HAVTM2 ;YES, DO THIS DIFFERENTLY
MOVEI T1,[ASCIZ /
%Specified time is prior to last crash.
Specified time: /]
PUSHJ P,ICONM ;START MESSAGE
PUSHJ P,PRDTIM## ;PRINT TIME OF DAY BASED ON LOCHOR/MIN/SEC
MOVEI T1,[ASCIZ /Last crash time: /]
PUSHJ P,CONMES##
HRRZ T1,CRSDTM ;GET TIME OF LAST CRASH (SECS PAST MIDNIGHT)
SUBI T1,RLDTIM## ;SUBTRACT TIME FOR RELOAD
IMUL T1,TICSEC## ;CONVERT TO TICKS
PUSHJ P,PRTIME## ;PRINT TIME OF DAY
PUSHJ P,OPOUT ;PUSH OUTPUT OUT
JRST HAVTM4 ;SEE IF THEY LIKE IT
HAVTM2: MOVEI T1,[ASCIZ /
%Specified time is prior to last crash time.
Crash time: /]
PUSHJ P,ICONM ;START MESSAGE
HRRZ T1,CRSDTM ;GET TIME OF LAST CRASH (SECS PAST MIDNIGHT)
SUBI T1,RLDTIM## ;SUBTRACT TIME FOR RELOAD
IMUL T1,TICSEC## ;CONVERT TO TICKS
PUSHJ P,PRTIMS## ;PRINT TIME
PUSHJ P,CRLF ;AND CRLF
PUSHJ P,OPOUT ;PUSH OUTPUT OUT
HAVTM3: MOVEI T1,[ASCIZ/
Specified time: /]
PUSHJ P,ICONM ;START MESSAGE
MOVE T1,TIME## ;GET TIME
PUSHJ P,PRTIMS## ;PRINT IT
MOVEI T1,[ASCIZ/ (/] ;GET TEXT
PUSHJ P,CONMES## ;TYPE
MOVE T1,TIME## ;GET TIME AGAIN
PUSHJ P,PRAMPM## ;TYPE AS AM/PM
MOVEI T1,[ASCIZ/)/] ;
PUSHJ P,CONMES## ;
PUSHJ P,OPOUT ;PUSH OUTPUT OUT
HAVTM4: SKIPE FETFLG ;DID DATE/TIME COME FROM FE?
PUSHJ P,RSTDEF ;YES, GIVE OPR TIME TO DISLIKE
MOVEI T1,[ASCIZ /Is this correct/]
MOVSI T2,'YES' ;DEFAULT ANSWER
PUSHJ P,PRSYNQ ;GET YES/NO RESPONSE
JUMPE T1,DATLP3 ;HE SAID "NO"
HAVTM5: SKIPGE FETFLG ;DID DATE/TIME COME FROM FE?
PUSHJ P,RSTDEF ;YES, GIVE OPR TIME TO REPLY AGAIN
JRST CPOPJ1## ;FINALLY DONE
;TABLE OF ASCIZ MONTH NAMES USED IN DEFAULTING DATE STRING
DEFINE MONTH.(NAME),<
IRP NAME,<ASCIZ /'NAME'-/>
>; END DEFINE MONTH.
MONTHS: MONTH. (<Jan,Feb,Mar,Apr,May,Jun,Jul,Aug,Sep,Oct,Nov,Dec>)
ONCMON: M.MON## ;MONTH MONITOR WAS GEN'D
ONCDAY: M.DAY## ;DAY MONITOR WAS GEN'D
ONCYER: M.YEAR## ;YEAR MONITOR WAS GEN'D
DTCKFL: M.DTCK## ;FLAG IF -1 OPR MUST VERIFY DATE/TIME
;CHANGE NETWORKS
CHGNET: SETZM ONCTCH ;DEFEAT PRSCON
SKIPN [M.NET##] ;HAVE ANY NETWORKS?
JRST CPOPJ1## ;NO
MOVEI T1,[ASCIZ /System-wide node name/]
SKIPN T2,ANFNAM## ;ANF-10 NAME OVERWRITES OTHERS
MOVE T2,DCNNAM## ;TRY DECNET
PUSHJ P,PRSSIX ;PROMPT AND PARSE RESULTS
MOVEM T1,STANAM## ;UPDATE
;ANF-10
CHGNE1: SKIPN [M.ANF##] ;NECESSARY SOFTWARE LOADED?
JRST CHGNE2 ;NO
MOVEI T1,[ASCIZ /ANF-10 node name/]
MOVE T2,ANFNAM## ;DEFAULT
PUSHJ P,PRSSIX ;PROMPT AND PARSE RESULTS
MOVEM T1,ANFNAM## ;UPDATE
MOVEI T1,[ASCIZ /ANF-10 node number/]
MOVE T2,ANFNUM## ;DEFAULT
MOVEI T3,1 ;LOW RANGE
MOVEI T4,77 ;HIGH RANGE
PUSHJ P,PRSOCT ;PROMPT AND PARSE RESULTS
MOVEM T1,ANFNUM## ;UPDATE
PUSHJ P,NETINI## ;ADJUST NDB, DDBS, ETC.
CHGNE2: SKIPN [M.DECN##] ;NECESSARY SOFTWARE LOADED?
JRST CHGNE3 ;NO
MOVEI T1,[ASCIZ /DECnet node name/]
MOVE T2,DCNNAM## ;DEFAULT
PUSHJ P,PRSSIX ;PROMPT AND PARSE RESULTS
MOVEM T1,DCNNAM## ;UPDATE
MOVEI T1,[ASCIZ /DECnet area number/]
MOVE T2,DCNHOM## ;DEFAULT
MOVEI T3,1 ;LOW RANGE
MOVEI T4,^D63 ;HIGH RANGE
PUSHJ P,PRSDEC ;PROMPT AND PARSE RESULTS
MOVEM T1,DCNHOM## ;UPDATE
MOVEI T1,[ASCIZ /DECnet node number/]
MOVE T2,DCNNUM## ;DEFAULT
MOVEI T3,1 ;LOW RANGE
MOVEI T4,^D1023 ;HIGH RANGE
PUSHJ P,PRSDEC ;PROMPT AND PARSE RESULTS
MOVEM T1,DCNNUM## ;UPDATE
CHGNE3: SKIPN [M.LAT##] ;NECESSARY SOFTWARE LOADED?
JRST CHGNE4 ;NO
MOVEI T1,[ASCIZ /LAT service name/]
MOVE T2,LATNAM## ;DEFAULT
PUSHJ P,PRSSIX ;PROMPT AND PARSE RESULTS
MOVEM T1,LATNAM## ;UPDATE
CHGNE4: JRST CPOPJ1## ;RETURN
SUBTTL STARTUP OPTION COMMANDS -- .DEFIN - DEFINE
.DEFIN::SETZM CHGFLG ;INDICATE DEFINE, NOT CHANGE
MOVEI T1,[ASCIZ /Define/] ;PROMPT
SETZ T2, ;NO DEFAULT KEYWORD
MOVE T3,[-DEFLEN,,DEFTAB] ;TABLE OF LEGAL RESPONSES
PUSHJ P,PRSKEY ;FETCH A KEYWORD
JRST CPOPJ1## ;HE HAD SECOND THOUGHTS
JRST @DEFDSP(T1) ;GO DEFINE SOMETHING
DEFINE DEFOPT,<
X (ASL,DEFASL##)
X (SDL,DEFSDL##)
X (SSL,DEFSSL##)
X (STRUCT,DEFSTR##)
> ;END DEFINE DEFOPT
DEFINE X (NAME,ADDR),<EXP <SIXBIT/NAME/>>
DEFTAB: DEFOPT
DEFLEN==.-DEFTAB
DEFINE X (NAME,ADDR),<IFIW ADDR>
DEFDSP: DEFOPT
SUBTTL STARTUP OPTION COMMANDS -- .GO - GO
.GO:: SETOM GOFLAG ;SAY WE'RE DONE ASKING QUESTIONS
JRST CPOPJ1## ;AND RETURN
SUBTTL STARTUP OPTION COMMANDS -- .HELP - HELP
.HELP: PUSHJ P,SAVE2## ;SAVE P1 AND P2
PUSHJ P,OTSET ;SETUP OUTPUT BYTE POINTER, ETC.
PUSHJ P,CRLFOP ;START WITH A CRLF
PUSHJ P,CRLFOP ;ONE MORE FOR CLARITY
MOVEI T1,[ASCIZ /Options are:/]
PUSHJ P,CONOUT ;PRINT TEXT
HLLZ P1,OPTPTR ;AOBJN POINTER TO TABLES
HELP1: PUSHJ P,OTSET ;RESET OUTPUT BYTE POINTER, ETC.
HRRZ T2,P1 ;GET TABLE INDEX
ADD T2,OPTPTR ;OFFSET INTO NAME TABLE
MOVE T2,(T2) ;GET NAME
PUSHJ P,PRNAME## ;PRINT IT
MOVEI T1,[ASCIZ / - /]
PUSHJ P,CONMES## ;PRINT SEPARATOR
HRRZ T1,P1 ;GET TABLE OFFSET
ADD T1,OPTHLP ;OFFSET INTO HELP TEXT TABLE
MOVE T1,(T1) ;FETCH STRING ADDRESS
PUSHJ P,CONMES## ;PRINT IT
PUSHJ P,CRLFOP ;APPEND A CRLF
AOBJN P1,HELP1 ;LOOP FOR ALL OPTIONS
SKIPN SWTPTR ;HAVE ANY SWITCHES?
JRST HELP3 ;NO
PUSHJ P,OTSET ;RESET OUTPUT BYTE POINTER, ETC.
PUSHJ P,CRLFOP ;START WITH A CRLF
PUSHJ P,CRLFOP ;ONE MORE FOR CLARITY
MOVEI T1,[ASCIZ /Switches are:/]
PUSHJ P,CONOUT ;PRINT TEXT
HLLZ P1,SWTPTR ;AOBJN POINTER TO TABLES
HELP2: PUSHJ P,OTSET ;RESET OUTPUT BYTE POINTER, ETC.
HRRZ T2,P1 ;GET TABLE INDEX
ADD T2,SWTPTR ;OFFSET INTO NAME TABLE
MOVE T2,(T2) ;GET NAME
PUSHJ P,PRNAME## ;PRINT IT
MOVEI T1,[ASCIZ / - /]
PUSHJ P,CONMES## ;PRINT SEPARATOR
HRRZ T1,P1 ;GET TABLE OFFSET
ADD T1,SWTHLP ;OFFSET INTO HELP TEXT TABLE
MOVE T1,(T1) ;FETCH STRING ADDRESS
PUSHJ P,CONMES## ;PRINT IT
PUSHJ P,CRLFOP ;APPEND A CRLF
AOBJN P1,HELP2 ;LOOP FOR ALL OPTIONS
HELP3: PUSHJ P,OTSET ;RESET OUTPUT BYTE POINTER, ETC.
PJRST CRLFOP ;END WITH AN EXTRA CRLF
SUBTTL STARTUP OPTION COMMANDS -- SHELP - SHORT HELP
SHELP: PUSHJ P,SAVE2## ;SAVE P1 AND P2
MOVE P1,OPTPTR ;AOBJN POINTER TO OPTION NAMES
MOVEI P2,6 ;SIX OPTIONS PER LINE
PUSHJ P,CRLFOP ;START WITH A CRLF
PUSHJ P,CRLFOP ;ONE MORE FOR CLARITY
MOVEI T1,[ASCIZ /Options are:/]
PUSHJ P,ICONM ;PRINT TEXT
SHELP1: MOVEI T1,[ASCIZ / /] ;TAB OVER
PUSHJ P,CONMES## ;START LINE
MOVE T2,(P1) ;GET OPTION NAME
PUSHJ P,PRNAME## ;PRINT IT
SOJG P2,SHELP2 ;ROOM FOR MORE ON THE LINE?
PUSHJ P,CRLFOP ;START ANOTHER LINE
MOVEI T1,[ASCIZ / /] ;TAB
PUSHJ P,ICONM ; OVER
MOVEI P2,6 ;RESET COUNT
SHELP2: AOBJN P1,SHELP1 ;LOOP FOR ANOTHER COMMAND
PUSHJ P,CRLFOP ;END WITH A CRLF
MOVEI T1,[ASCIZ /Type "HELP" for additional information/]
PJRST CONOUT ;PRINT TEXT AND RETURN
SUBTTL STARTUP OPTION COMMANDS -- .NOINI - NOINITIA
.NOINI: PUSHJ P,NOCOPY ;PREVENT CRSCPY FROM RUNNING
SETOM GOFLAG ;READY TO START THE MONITOR
JRST CPOPJ1## ;RETURN
SUBTTL STARTUP OPTION COMMANDS -- .SHOW - SHOW
.SHOW:: MOVEI T1,[ASCIZ /Show/]
SETZ T2, ;NO DEFAULT
MOVE T3,SHWPTR ;TABLE OF OPTIONS
PUSHJ P,PRSKEY ;GET AN ANSWER
JRST CPOPJ1## ;BACK OUT OF SHOW
ADD T1,SHWDSP ;INDEX INTO THE DISPATCH TABLE
PUSHJ P,@(T1) ;DO SOMETHING
JFCL ;FOOL
JRST CPOPJ1## ;RETURN
DEFINE SHWOPT,<
X (ASL,SHWASL##)
X (DATE,SHWDAT)
X (NETWOR,SHWNET)
X (SDL,SHWSDL##)
X (SETS,SHWSET##)
X (SSL,SHWSSL##)
X (STRUCT,SHWSTR##)
X (UNIT,SHWUNI##)
> ;END DEFINE SHWOPT
DEFINE X (NAME,ADDR),<EXP <SIXBIT/NAME/>>
SHWTAB: SHWOPT
SHWLEN==.-SHWTAB
DEFINE X (NAME,ADDR),<IFIW ADDR>
SHWADR: SHWOPT
;USRONC WRITES THESE LOCATIONS
SHWPTR::-SHWLEN,,SHWTAB
SHWDSP::IFIW SHWADR
;SHOW DATE
SHWDAT: PUSHJ P,OTSET ;SET UP OUTPUT BUFFER
PUSHJ P,DAYTIM## ;PRINT DAY, DATE, & TIME
PUSHJ P,CRLFOP ;APPEND A CRLF
JRST CPOPJ1## ;AND RETURN
;SHOW NETWORKS
SHWNET::MOVEI T1,[ASCIZ /
Networks:
System-wide node name: /]
PUSHJ P,ICONM ;PRINT TEXT
MOVE T2,STANAM## ;GET NAME
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,CRLFOP ;END LINE
SHWNE1: SKIPN [M.ANF##] ;NECESSARY SOFTWARE LOADED?
JRST SHWNE2 ;NO
MOVEI T1,[ASCIZ / ANF-10 node /]
PUSHJ P,ICONM ;PRINT TEXT
MOVE T2,ANFNAM## ;GET NAME
PUSHJ P,PRNAME## ;PRINT IT
MOVEI T3,"(" ;START OF DELIMITER
PUSHJ P,COMTYO## ;PRINT IT
MOVE T1,ANFNUM## ;GET NUMBER
PUSHJ P,PRTDI8## ;PRINT IT
MOVEI T3,")" ;END OF DELIMITER
PUSHJ P,COMTYO## ;PRINT IT
PUSHJ P,CRLFOP ;END LINE
SHWNE2: SKIPN [M.DECN##] ;NECESSARY SOFTWARE LOADED?
JRST SHWNE3 ;NO
MOVEI T1,[ASCIZ / DECnet node /]
PUSHJ P,ICONM ;PRINT TEXT
MOVE T2,DCNNAM## ;GET NAME
PUSHJ P,PRNAME## ;PRINT IT
MOVEI T3,"(" ;START OF DELIMITER
PUSHJ P,COMTYO## ;PRINT IT
MOVE T1,DCNHOM## ;GET AREA
PUSHJ P,PRTDIG## ;PRINT IT
PUSHJ P,PRPER## ;SEPARATOR
MOVE T1,DCNNUM## ;GET NUMBER
PUSHJ P,PRTDIG## ;PRINT IT
MOVEI T3,")" ;END OF DELIMITER
PUSHJ P,COMTYO## ;PRINT IT
PUSHJ P,CRLFOP ;END LINE
SHWNE3: SKIPN [M.LAT##] ;NECESSARY SOFTWARE LOADED?
JRST SHWNE4 ;NO
MOVEI T1,[ASCIZ / LAT service: /]
PUSHJ P,ICONM ;PRINT TEXT
MOVE T2,LATNAM## ;GET NAME
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,CRLFOP ;END LINE
SHWNE4: JRST CPOPJ1## ;RETURN
SUBTTL STARTUP OPTION SWITCHES -- /NOASL
NOASL: SETZM PREASL ;INVLAIDATE CORE COPY OF ASL
POPJ P, ;RETURN
SUBTTL STARTUP OPTION SWITCHES -- /NOCOPY
NOCOPY: MOVSI T1,(DF.DCC) ;DISABLE INVOCATION OF
IORM T1,DEBUGF## ; CRSCPY AT STARTUP
POPJ P, ;RETURN
SUBTTL STARTUP OPTION SWITCHES -- /NOPRIMARY
IFN FTKL10,<
NOPRIM: MOVSI T1,(ST%NPP) ;GET BIT
IORM T1,CNFST2## ;DISABLE PRIMARY PROTOCOL STARTUP
POPJ P, ;RETURN
> ;END IFN FTKL10
SUBTTL STARTUP OPTION SWITCHES -- /NOSDL
NOSDL: SETZM PRESDL ;INVALIDATE CORE COPY OF SDL
POPJ P, ;RETURN
SUBTTL STARTUP OPTION SWITCHES -- /NOSSL
NOSSL: SETZM PRESSL ;INVALIDATE CORE COPY OF SSL
POPJ P, ;RETURN
SUBTTL STARTUP OPTION SWITCHES -- /NOVALIDATE
NOVALI: MOVSI T1,(ST%ACV) ;ACCOUNT VALIDATION BIT
ANDCAM T1,CNFST2## ;TELL [SYSTEM]ACCOUNTING TO BE FORGIVING
POPJ P, ;RETURN
SUBTTL STARTUP OPTION SWITCHES -- /STANDALONE
STAND: MOVEI T1,ST.NRT ;NO REMOTE TERMINALS
IORM T1,STATES## ;SET SCHED 10
POPJ P, ;RETURN
PRSSET::MOVE T1,[TXTBUF,,TXTBUF+1] ;SET UP BLT
SETZM TXTBUF ;CLEAR FIRST WORD
BLT T1,TXTBUF+TXTLEN-1 ;CLEAR BUFFER
MOVE T1,[POINT 7,TXTBUF] ;BYTE POINTER TO STORAGE
MOVEM T1,TXTPTR ;SAVE
MOVEI T1,<TXTLEN*5>-1 ;BYTE COUNT
MOVEM T1,TXTCNT ;SAVE
SETZM ONCTCH ;NO LONGER HAVE A VALID SEPARATOR
MOVEI T1,PRSTYO ;NEW CHARACTER TYPER
EXCH T1,.CPTOA## ;SWAP
POPJ P, ;RETURN
PRSTYO: SOSLE TXTCNT ;COUNT DOWN
IDPB T3,TXTPTR ;STORE CHARACTER
POPJ P, ;RETURN
PRSCON::LDB T3,ONCTIP ;GET LAST SEPARATOR SEEN
CAMN T3,ONCTCH ;IF IT'S THE SAME AS WHAT'S STORED,
CAIE T3," " ;AND IT'S A SPACE,
JRST CPOPJ1## ;(WRONG--GIVE MUST-PROMPT RETURN)
PUSH P,ONCTCH ;YES--SAVE CHARACTER
PUSH P,ONCTIP ;AND TYPEIN POINTER
PUSHJ P,SKIPS1## ;SEE IF MORE ON THIS LINE
AOS -2(P) ;NO--STILL NEED TO PROMPT
POP P,ONCTIP ;RESTORE TYPEIN POINTER
POP P,ONCTCH ;AND THE CHARACTER
POPJ P, ;RETURN NON-SKIP TO AVOID THE PROMPT
PRSKEY: PUSHJ P,SAVE2## ;SAVE P1 AND P2
PUSH P,T1 ;SAVE PROMPT STRING
PUSH P,T2 ;SAVE DEFAULT ANSWER
PUSH P,T3 ;SAVE TABLE ADDRESS
PUSHJ P,PRSCON ;SEE IF WE CAN CONTINUE
JRST PRSKE0 ;YES--DO SO
PRSKE1: MOVE T1,-2(P) ;GET PROMPT
PUSHJ P,ICONM ;START THE LINE
SKIPN P1,(P) ;ANY KEYWORDS?
JRST PRSKE2 ;NO
MOVNI P2,1 ;INIT A FLAG
MOVEI T1,[ASCIZ / (/] ;START OF LIST
PUSHJ P,CONMES## ;START OF RANGE
PUSHJ P,OPTKEY ;PUT OUT A LIST OF OPTIONS
MOVEI T1,[ASCIZ /)/] ;END OF LIST
PUSHJ P,CONMES## ;PRINT TERMINATOR
PRSKE2: SKIPN -1(P) ;HAVE A DEFAULT?
JRST PRSKE3 ;NOPE
MOVEI T1,[ASCIZ / [/] ;START OF DEFAULT
PUSHJ P,CONMES## ;PRINT TEXT
MOVE T2,-1(P) ;GET KEYWORD
PUSHJ P,PRNAME## ;PRINT IT
PUSH P,.CPTOA## ;SAVE TYPEOUT ADDRESS
MOVEI T1,DEFTYO ;TYPEOUT ROUTINE TO SETUP DEFAULT TEXT
MOVEM T1,.CPTOA## ;SET IT UP
MOVE T1,DEFSP ;INITIAL STRING POINTER
MOVEM T1,DEFPTR ;STORE AT BEGINNING OF DEFAULT BUFFER
MOVE T2,-2(P) ;GET DEFAULT AGAIN
PUSHJ P,PRNAME## ;STUFF INTO THE BUFFER
MOVEI T1,[ASCIZ / ;Operator did not answer/]
PUSHJ P,DEFTXT ;ADD SOME MORE TO THE DEFAULT BUFFER
MOVE T1,DEFSP ;INITIAL POINTER
MOVEM T1,DEFPTR ;RESET FOR PARSING
POP P,.CPTOA## ;RESTORE TYPEOUT ADDRESS
MOVEI T1,[ASCIZ /]/] ;END OF DEFAULT
PUSHJ P,CONMES## ;PRINT IT
PRSKE3: MOVEI T1,[ASCIZ /: /]
PUSHJ P,CONMES## ;PRINT COLON
PUSHJ P,OPOUT ;FORCE OUTPUT
PUSHJ P,GETLIN ;GET OPERATOR'S RESPONSE
JRST PRSKE4 ;GO USE DEFAULT
PRSKE0: PUSHJ P,ALTM ;BACK TO STARTUP OPTION IF ALTMODE TYPED
PUSHJ P,SIXIN ;GET ANSWER
JRST PRSKE7 ;BAD RESPONSE
JRST PRSKE7 ;BAD RESPONSE
MOVE T2,T1 ;COPY KEYWORD
JRST PRSKE5 ;DON'T NEED DEFAULT
PRSKE4: SKIPN T2,-1(P) ;PICK UP DEFAULT
JRST PRSKE6 ;THERE IS NO DEFAULT, HE WANTS OUT
PRSKE5: MOVE T1,(P) ;AND GET AOBJN POINTER TO TABLE
PUSHJ P,ALTM ;BACK TO STARTUP OPTION IF ALTMODE TYPED
PUSHJ P,FNDNAM## ;NOW LOOKUP NAME IN TABLE
JRST PRSKE7 ;NO MATCH
AOS -3(P) ;SKIP RETURN
PRSKE6: POP P,T3 ;RESTORE T3
POP P,T2 ;RESTORE T2
POP P,(P) ;PHASE STACK
POPJ P, ;RETURN WITH RESULT IN T1
PRSKE7: MOVEI T1,[ASCIZ /% Bad response, try again/]
PUSHJ P,CONOUT ;PRINT MESSAGE
JRST PRSKE1 ;LOOP BACK
;PUT OUT A LIST OF KEYWORD OPTIONS
OPTKEY: MOVNI P2,1 ;INIT A FLAG
OPTKE1: MOVEI T1,[ASCIZ /,/] ;SEPARATOR
AOSE P2 ;FIRST KEYWORD?
PUSHJ P,CONMES## ;NO--PRINT SEPARATOR
MOVE T2,(P1) ;GET A KEYWORD
PUSHJ P,PRNAME## ;PRINT IT
AOBJN P1,OPTKE1 ;LOOP FOR ALL KEYWORDS
POPJ P, ;RETURN
;LIST OF NAMES
PRSLST::PUSHJ P,SAVE2## ;SAVE P1 AND P2
PUSH P,T1 ;SAVE PROMPT STRING
PUSH P,T2 ;SAVE VALIDATION ROUTINE
PUSH P,T3 ;SAVE TABLE ADDRESS
SETZM (T3) ;CLEAR A WORD
AOBJN T3,.-1 ;DO THE WHOLE TABLE
PRSLS1: MOVE T1,-2(P) ;GET PROMPT
PUSHJ P,CONOUT ;PRINT IT
MOVE P1,(P) ;GET AOBJN POINTER TO TABLE
PRSLS2: PUSHJ P,GETLIN ;GET OPERATOR'S RESPONSE
JRST PRSLS4 ;NO MORE TYPEIN
JUMPGE P1,PRSLS3 ;ERROR IF TABLE IS FULL
PUSHJ P,ALTM ;BACK TO STARTUP OPTION IF ALTMODE TYPED
PUSHJ P,SIXIN ;GET ANSWER
JRST PRSLS5 ;BAD RESPONSE
JRST PRSLS5 ;BAD RESPONSE
MOVE P2,T1 ;COPY NAME TO A SAFE PLACE
PUSHJ P,@-1(P) ;CALL VALIDATION ROUTINE
JRST PRSLS2 ;DIDN'T PASS TEST
TDZA T1,T1 ;CONTINUE RETURN
MOVEI T1,1 ;LAST RETURN
MOVEM P2,(P1) ;SAVE RESULTS IN TABLE
AOBJN P1,.+1 ;ADVANCE POINTER
JUMPN T1,PRSLS4 ;SKIP ON IF DONE
JRST PRSLS2 ;NO, GET ANOTHER REPLY
PRSLS3: MOVEI T1,[ASCIZ /% Table is full/]
PUSHJ P,CONOUT ;PRINT THE MESSAGE
PRSLS4: HRRZ T1,(P) ;GET STARTING ADDRESS OF TABLE
HRRZ T2,P1 ;AND WHERE IT IS NOW
SUBI T1,(T2) ;COMPUTE DIFFERENCE
HRLZS T1 ;PUT -LENGTH IN LH
HRR T1,(P) ;RETURN AOBJN POINTER TO READ RESULTS
POP P,T3 ;RESTORE T3
POP P,T2 ;RESTORE T2
POP P,(P) ;PHASE STACK
POPJ P, ;RETURN
PRSLS5: MOVEI T1,[ASCIZ /% Bad response, try again/]
PUSHJ P,CONOUT ;PRINT THE MESSAGE
JRST PRSLS2 ;LOOP BACK
;RANDOM TEXT
PRSTXT::PUSHJ P,SAVE2## ;SAVE P1 AND P2
PUSH P,T1 ;SAVE PROMPT STRING
PUSH P,T2 ;SAVE DEFAULT ANSWER
PRSTX1: MOVE T1,-1(P) ;GET PROMPT
PUSHJ P,ICONM ;START THE LINE
SKIPN (P) ;HAVE A DEFAULT
JRST PRSTX2 ;NO
MOVEI T1,[ASCIZ / [/]
PUSHJ P,CONMES## ;PRINT BRACKET
MOVE T1,(P) ;GET DEFAULT
MOVE T1,DEFSP ;INITIAL STRING POINTER
MOVEM T1,DEFPTR ;SET IT UP
MOVE T1,(P) ;GET THE DEFAULT AGAIN
PUSHJ P,DEFTXT ;STUFF IT INTO THE DEFAULT BUFFER
MOVEI T1,[ASCIZ / ;Operator did not answer/]
PUSHJ P,DEFTXT ;APPEND NOTICE THAT WE ARE DEFAULTING
MOVE T1,DEFSP ;INITIAL STRING POINTER AGAIN
MOVEM T1,DEFPTR ;RESET FOR PARSING
PUSHJ P,CONMES## ;PRINT IT
MOVEI T1,[ASCIZ /]/]
PUSHJ P,CONMES## ;PRINT BRACKET
PRSTX2: MOVEI T1,[ASCIZ /: /]
PUSHJ P,CONMES## ;PRINT COLON
PUSHJ P,OPOUT ;FORCE OUTPUT
PUSHJ P,GETLIN ;GET OPERATOR'S RESPONSE
JRST PRSTX3 ;NOTHING TYPED SO DO DEFAULTING
PUSHJ P,ALTM ;BACK TO STARTUP OPTION IF ALTMODE TYPED
JRST PRSTX6 ;FINISH UP
PRSTX3: PUSHJ P,ALTM ;BACK TO STARTUP OPTION IF ALTMODE TYPED
SKIPN T1,(P) ;POINT TO DEFAULT
JRST PRSTX5 ;NO DEFAULT
MOVEI T2,ONCTSZ ;MAXIMUM BYTE COUNT
PRSTX4: HRLI T1,(POINT 7,) ;MAKE A BYTE POINTER
ILDB T3,(T1) ;GET A CHARACTER
IDPB T3,LINEP ;PUT A CHARACTER
SOSLE T2 ;COUNT CHARACTERS
JUMPN T3,PRSTX4 ;LOOP FOR ENTIRE STRING
PRSTX5: MOVE T1,[POINT 7,LINBUF] ;RESET POINTER
MOVEM T1,LINEP ;SO CALLER CAN GRAB CHARACTERS
PRSTX6: POP P,T2 ;RESTORE T2
POP P,(P) ;PHASE STACK
MOVEI T1,LINBUF ;POINT TO BUFFER
POPJ P, ;RETURN WITH RESULT IN T1
;PPN
PRSPPN::PUSHJ P,SAVE2## ;SAVE P1 AND P2
PUSH P,T1 ;SAVE PROMPT STRING
PUSH P,T2 ;SAVE DEFAULT ANSWER
PUSH P,T3 ;SAVE POSSIBLE KEYWORD TABLE ADDRESS
PUSHJ P,PRSCON ;SEE IF 'TYPEAHEAD' PRESENT
JRST PRSPP0 ;YES--JUST USE IT
PRSPP1: MOVE T1,-2(P) ;GET PROMPT
PUSHJ P,ICONM ;START THE LINE
MOVEI T1,[ASCIZ / (/] ;START OF OPTIONS LIST
PUSHJ P,CONMES## ;PRINT TEXT
SETO P2, ;IN CASE NO KEYWORD LIST
SKIPE P1,(P) ;HAVE A KEYWORD LIST?
PUSHJ P,OPTKEY ;YES--PUT OUT A LIST OF OPTIONS
MOVEI T1,[ASCIZ /,/] ;SEPARATOR
AOSE P2 ;FIRST KEYWORD?
PUSHJ P,CONMES## ;NO--PRINT SEPARATOR
MOVEI T1,[ASCIZ /[p,pn])/]
PUSHJ P,CONMES## ;LAST ALTERNATIVE
SKIPN -1(P) ;HAVE SOME KIND OF DEFAULT?
JRST PRSPP2 ;NO
MOVEI T1,[ASCIZ / [/]
PUSHJ P,CONMES## ;PRINT BRACKET
MOVE T1,-1(P) ;GET DEFAULT
MOVE T2,T1 ;MAKE A COPY
TLC T2,-1 ;WANT TO TEST FOR -1
TLCE T2,-1 ;WAS IT (AND NOW AGAIN)?
SKIPL T2 ;NO--OTHER NEGATIVE IS SIXBIT
SKIPA T3,[PRTPPN##] ;YES--TYPE AS A PPN
MOVEI T3,PRNAME## ;HERE FOR SIXBIT TYPEOUT FROM WRONG REGISTER
PUSH P,T3 ;SAVE FORMAT ROUTINE FOR RE-USE
PUSHJ P,(T3) ;PRINT SOMETHING
MOVEI T3,DEFTYO ;TYPEOUT ROUTINE TO USE FOR DEFAULT TEXT
EXCH T3,.CPTOA## ;SET IT UP AND GET OLD
EXCH T3,(P) ;SAVE AND RESTORE FORMAT ROUTINE
MOVE T1,DEFSP ;INITIAL STRING POINTER
MOVEM T1,DEFPTR ;START STUFFING INTO BEGINNING OF DEFAULT BUFFER
MOVE T1,-2(P) ;GET DEFAULT VALUE BACK
PUSHJ P,(T3) ;STORE IT IN THE BUFFER
MOVEI T1,[ASCIZ / ;Operator did not answer/]
PUSHJ P,DEFTXT ;APPEND THE USUAL NOTICE ABOUT DEFAULTING
MOVE T1,DEFSP ;INITIAL POINTER AGAIN
MOVEM T1,DEFPTR ;RESET FOR PARSING
POP P,.CPTOA## ;RESTORE TYPEOUT ADDRESS
MOVEI T1,[ASCIZ /]/]
PUSHJ P,CONMES## ;PRINT BRACKET
PRSPP2: MOVEI T1,[ASCIZ /: /]
PUSHJ P,CONMES## ;PRINT COLON
PUSHJ P,OPOUT ;FORCE OUTPUT
PUSHJ P,GETLIN ;GET OPERATOR'S RESPONSE
JRST PRSPP5 ;GO DEFAULT THE ANSWER
PRSPP0: PUSHJ P,ALTM ;BACK TO STARTUP OPTION IF ALTMODE TYPED
PUSHJ P,SIXIN ;FIRST TRY FOR A KEYWORD
JRST PRSPP5 ;GO DEFAULT THE ANSWER
SKIPA ;TRY FOR A PPN INSTEAD
JRST PRSPP4 ;GO CHECKOUT THE KEYWORD
PUSHJ P,GTPPN ;TRY TO READ A PPN
PRSPP3: SKIPA T1,[[ASCIZ /% Bad response, try again/]]
JRST PRSPP6 ;GO FINISH UP
PUSHJ P,CONOUT ;PRINT THE MESSAGE
JRST PRSPP1 ;TRY AGAIN
PRSPP4: MOVE T1,(P) ;AND GET AOBJN POINTER TO TABLE
PUSHJ P,FNDNAM## ;NOW LOOKUP NAME IN TABLE
JRST PRSPP3 ;NO MATCH
JRST PRSPP6 ;GO FINISH UP
PRSPP5: PUSHJ P,ALTM ;BACK TO STARTUP OPTION IF ALTMODE TYPED
MOVE T2,-1(P) ;GET DEFAULT ANSWER
HLRZ T1,T2 ;ISOLATE LH OF ANSWER
CAIE T1,-1 ;IF NOT [*,...]
JUMPL T2,PRSPP4 ;THEN IT HAD BETTER BE SIXBIT IN THE KEYS LIST
MOVE T1,T2 ;PPN--PUT IN RIGHT REGISTER
PRSPP6: POP P,T3 ;RESTORE T3
POP P,T2 ;RESTORE T2
POP P,(P) ;PHASE STACK
POPJ P, ;RETURN WITH RESULT IN T1
GTPPN: CAIE T3,"[" ;BEGINNING OF PPN
POPJ P, ;NOT THERE
PUSHJ P,GETOCT ;GET THE FIRST OCTAL NUMBER
JUMPE T2,CPOPJ## ;NULL PROJECT NUMBER IS BAD
TLNN T2,777777 ;TOO BIG?
CAIE T3,"," ;OR A BAD P,PN SEPARATER
POPJ P, ;YEP
PUSH P,T2 ;SAVE IT
PUSHJ P,GETOCT ;GET THE PROGRAMMER NUMBER
POP P,T1 ;GET PROJECT NUMBER BACK
JUMPE T2,CPOPJ## ;NULL PROGRAMMER NUMBER IS BAD
CAIE T3,"]" ;CHECK FOR LEGAL TERMINATER
CAIN T3,0 ;CRLF IS OK TOO
TLNE T2,777777 ;TOO BIG?
POPJ P, ;YEP
HRL T1,T2 ;GET PROGRAMMER NUMBER
MOVSS T1 ;SET IT UP AS [PROJ,PROG]
AOS (P) ;GIVE A SKIP
POPJ P, ;AND RETURN
GETOCT: MOVEI T2,777777 ;ASSUME WILD
PUSHJ P,COMTYS## ;GET NEXT CHARACTER
CAIE T3,"*" ;WILD?
TDZA T2,T2 ;NO - CLEAR RESULT
GETOC1: PUSHJ P,COMTYS## ;GET NEXT CHARACTER
CAIL T3,"0" ;IN RANGE?
CAILE T3,"7"
POPJ P,
LSH T2,3 ;CLEAR NULL DIGIT
SUBI T3,"0" ;CONVERT TO BINARY
ADDI T2,(T3) ;ADD TO TOTAL
JRST GETOC1 ;LOOP UNTIL DONE
;OCTAL
PRSOCT::PUSHJ P,SAVE2## ;SAVE P1 AND P2
MOVEI P1,PRTDI8## ;TYPEOUT ROUTINE
MOVEI P2,OCTIN## ;TYPEIN ROUTINE
PJRST PRSANS ;ENTER COMMON CODE
;DECIMAL
PRSDEC::PUSHJ P,SAVE2## ;SAVE P1 AND P2
MOVEI P1,RADX10## ;TYPEOUT ROUTINE
MOVEI P2,DECIN## ;TYPEIN ROUTINE
PJRST PRSANS ;ENTER COMMON CODE
;SIXBIT
PRSSIX::PUSHJ P,SAVE2## ;SAVE P1 AND P2
MOVEI P1,SIXOUT ;TYPEOUT ROUTINE
MOVEI P2,SIXIN ;TYPEIN ROUTINE
SETZB T3,T4 ;NO RANGE
PJRST PRSANS ;ENTER COMMON CODE
;YES/NO
PRSYN0: POP P,T1 ;RESTORE POINTER TO QUESTION
PRSYNQ::PUSH P,T1 ;SAVE POINTER TO QUESTION
SETZM ONCTCH ;DEFEAT PRSCON
MOVE T3,[-2,,[SIXBIT /NO YES /]] ;AOBJN POINTER TO TABLE
PUSHJ P,PRSKEY ;PARSE KEYWORD
JRST PRSYN0 ;HMMMMM, LET'S TRY AGAIN
POP P,(P) ;REPHASE STACK
POPJ P, ;RETURN
SIXIN: PUSHJ P,CTEXT## ;READ SIXBIT QUANTITY
SKIPE T1,T2 ;GET RESULT
AOS (P) ;NO RESPONSE
AOS (P) ;NOT SIXBIT
POPJ P, ;RETURN
SIXOUT: MOVE T2,T1 ;GET QUANTITY
PJRST PRNAME## ;PRINT AND RETURN
PRSANS: PUSH P,T1 ;SAVE PROMPT STRING
PUSH P,T2 ;SAVE DEFAULT ANSWER
PUSH P,T3 ;SAVE LOW RANGE
PUSH P,T4 ;SAVE HIGH RANGE
PUSHJ P,PRSCON ;SEE IF MORE ON SAME LINE
JRST PRSAN0 ;YES--JUST GO USE THE TEXT
PRSAN1: MOVE T1,-3(P) ;GET PROMPT
PUSHJ P,ICONM ;START THE LINE
SKIPN (P) ;ANY RANGE RESTRICTIONS?
JRST PRSAN2 ;NO
MOVEI T1,[ASCIZ / (/]
PUSHJ P,CONMES## ;START OF RANGE
MOVE T1,-1(P) ;GET LOW NUMBER
PUSHJ P,(P1) ;PRINT IT
MOVEI T1,[ASCIZ / - /]
PUSHJ P,CONMES## ;PRINT SEPARATOR
MOVE T1,(P) ;GET HIGH NUMBER
PUSHJ P,(P1) ;PRINT IT
MOVEI T1,[ASCIZ /)/]
PUSHJ P,CONMES## ;END OF NUMBER
PRSAN2: MOVE T1,-2(P) ;GET DEFAULT
CAIN P2,SIXIN ;SIXBIT?
JUMPE T1,PRSAN3 ;THEN NOT DEFAULTING
MOVEI T1,[ASCIZ / [/]
PUSHJ P,CONMES## ;PRINT BRACKET
MOVE T1,-2(P) ;GET DEFAULT ANSWER
PUSHJ P,(P1) ;PRINT IT
PUSH P,.CPTOA## ;SAVE OUTPUT ADDRESS
MOVEI T1,DEFTYO ;TYPEOUT ROUTINE TO STORE DEFAULT TEXT
MOVEM T1,.CPTOA## ;SET IT UP
MOVE T1,DEFSP ;INITIAL STRING POINTER
MOVEM T1,DEFPTR ;SETUP FOR DEFAULTING
MOVE T1,-3(P) ;GET DEFAULT ANSWER AGAIN
PUSHJ P,(P1) ;STUFF IT INTO THE DEFAULT BUFFER
MOVEI T1,[ASCIZ / ;Operator did not answer/]
PUSHJ P,DEFTXT ;APPEND SOME ADDITIONAL TEXT
MOVE T1,DEFSP ;INITIAL STRING POINTER AGAIN
MOVEM T1,DEFPTR ;RESET FOR PARSING
POP P,.CPTOA## ;RESTORE TYPEOUT ADDRESS
MOVEI T1,[ASCIZ /]/]
PUSHJ P,CONMES## ;PRINT BRACKET
PRSAN3: MOVEI T1,[ASCIZ /: /]
PUSHJ P,CONMES## ;PRINT COLON
PUSHJ P,OPOUT ;FORCE OUTPUT
PUSHJ P,GETLIN ;GET OPERATOR'S RESPONSE
JRST [MOVE T1,-2(P) ;PICK UP DEFAULT
JRST PRSAN4] ;AND CONTINUE
PRSAN0: PUSHJ P,ALTM ;BACK TO STARTUP OPTION IF ALTMODE TYPED
PUSHJ P,(P2) ;GET ANSWER
JRST PRSAN5 ;BAD RESPONSE
JRST PRSAN5 ;BAD RESPONSE
MOVE T1,T2 ;POSITION RETURN VALUE PROPERLY
PRSAN4: PUSHJ P,ALTM ;BACK TO STARTUP OPTION IF ALTMODE TYPED
SKIPN -1(P) ;RANGE
SKIPE (P) ; CHECKING?
TRNA ;YES--DO THE TESTS
JRST PRSAN6 ;SKIP TESTS
CAML T1,-1(P) ;RANGE
CAMLE T1,(P) ; CHECK
SKIPA ;NO GOOD
JRST PRSAN6 ;FINISH UP
PRSAN5: MOVEI T1,[ASCIZ /% Bad response, try again/]
PUSHJ P,CONOUT ;PRINT THE MESSAGE
JRST PRSAN1 ;LOOP BACK
PRSAN6: POP P,T4 ;RESTORE T4
POP P,T3 ;RESTORE T3
POP P,T2 ;RESTORE T2
POP P,(P) ;PHASE STACK
POPJ P, ;RETURN WITH RESULT IN T1
SUBTTL EXIT FROM STARTUP OPTION
;HERE ON EXIT FROM STARTUP OPTION
PVQCK:: SKIPE .UONCE## ;IF THIS IS USER-MODE, THEN "GO" IS QUIT
CALLI 12 ;EXIT
SETZM .CPJOB## ;CLEAR CURRENT JOB
IFE FTMP,<SETOM .CPOK##> ;MAKE THE ONE AND ONLY LOOK ALIVE
SUBTTL SORT DDB CHAIN AND SET UP GENERIC DEVICE TABLE
;WE MUST NOW SORT ALL DDB'S SO THAT ALL DDB'S OF A GIVEN DEVICE CLASS
; (DTA, LPT, CDR, ...) ARE CONTIGUOUS ON THE CHAIN. THEN, WE SET UP
; THE GENERIC DEVICE TABLE TO POINT TO THE 1ST DDB IN EACH SUCH DEVICE
; CLASS. THIS WILL SPEED UP THE GENERIC SEARCH
HLRZ F,DEVLST## ;GET START OF CHAIN
GNSRC1: MOVE T1,GENPTR## ;AOBJN POINTER TO GENTAB
GNSRC2: MOVE T2,GENTAB##(T1) ;GET DEVICE NAME FROM TABLE (IN RH)
HLRZ T3,DEVNAM(F) ; AND NAME FROM DDB
CAIE T2,(T3) ;FOUND DEVICE IN TABLE?
JRST GNSRC3 ;NO, CONTINUE THE SEARCH
HRRZ T2,GENTAB##+1(T1) ;YES, GET THE DDB ADDRESS
JUMPN T2,GNSRC4 ;IF ALREADY SET UP, EXIT
HRRM F,GENTAB##+1(T1) ;NO, PUT DDB ADDRESS IN TABLE
JRST GNSRC4 ;LEAVE THIS SEARCH ROUTINE
GNSRC3: AOBJN T1,.+1 ;ACCOUNT FOR TWO WORD ENTRIES
AOBJN T1,GNSRC2 ;LOOP THROUGH THE TABLE
JRST GNSRC7 ;NOT FOUND IN GENTAB - TRY NEXT DDB
;FROM HERE ON, WE MUST SORT ALL DDB'S ACCORDING TO DEVICE TYPES
;AC USAGE:
; F = CURRENT DDB
; T1 = PTR TO "LAST" DDB IN DEVICE GROUP
; T2 = MOVING PTR WITHIN DEVICE GROUP
GNSRC4: MOVE T2,F ;INIT MOVING PTR
GNSRC5: MOVE T1,T2 ;INIT "LAST" DDB IN DEVICE GROUP
HLRZ T2,DEVSER(T2) ;GET NEXT DDB
JUMPE T2,GNSRC8 ;END OF CHAIN, WE'RE THRU
HLRZ T3,DEVNAM(F) ;GET DEVICE NAME OF CURRENT DDB
HLRZ T4,DEVNAM(T2) ; AND OF THIS DDB
CAMN T3,T4 ;SAME DEVICE?
JRST GNSRC5 ;YES, GO UNTIL WE GET OUT OF DEVICE GOURP
GNSRC6: MOVE P3,T2 ;SAVE THIS ADDRESS
HLRZ T2,DEVSER(T2) ;NOW, WE START SEARCH TO FIND ANOTHER
JUMPE T2,GNSRC8 ;..DEVICE IN THIS GROUP
HLRZ T3,DEVNAM(F) ;FETCH NAME AGAIN
HLRZ T4,DEVNAM(T2) ;AND NEW NAME
CAME T3,T4 ;IS THIS DDB OUT OF ORDER?
JRST GNSRC6 ;NO
;WE HAVE NOW FOUND A DDB WHICH IS NOT CONTIGUOUS WITH OTHER DDB'S
; OF ITS DEVICE GROUP. WE MUST RE-LINK THEM SO THAT IT BECOMES
; CONTIGUOUS.
HLRZ T3,DEVSER(T2) ;GET NEXT DDB PTR
HRLM T3,DEVSER(P3) ;REMOVE THIS DDB FROM CHAIN
HLRZ T3,DEVSER(T1) ;GET NEXT PTR FROM "LAST" DDB IN GROUP
HRLM T3,DEVSER(T2) ;MAKE US POINT TO NEXT DDB
HRLM T2,DEVSER(T1) ;MAKE LAST DDB POINT TO US
MOVE T1,T2 ;CONTINUE SEARCH
JRST GNSRC6
GNSRC7: MOVE T1,F ;NOT IN GENTAB, TRY NEXT DDB
GNSRC8: HLRZ F,DEVSER(T1) ;GO TO NEXT DDB AFTER THIS GROUP
JUMPN F,GNSRC1 ;CONTINUE SEARCH IF MORE
;ALL DDB'S ARE SORTED, FALL THROUGH TO NEXT PAGE
SUBTTL SWPSER/QUESER INITIALIZATION
SETZ J, ;CLEAR J TO SET UP A PDB FOR THE NULL JOB
PUSHJ P,CREPDB## ;ALLOCATE A PDB
STOPCD .,STOP,CCPNUL, ;++CAN'T CREATE PDB FOR NULL JOB
PUSHJ P,SWPINI ;INIT SWAPPING SPACE ALLOCATION
PUSHJ P,ENQINI## ;INITIALIZE ENQ/DEQ
IFN FTKL10,<
MOVE T1,SYSSIZ## ;HIGHEST ADDRESS IN THE LOW SEGMENT
LSH T1,W2PLSH ;HIGHEST PAGE
MOVE T2,.CPKPM## ;KEEP ME BIT OR 0
MOVE T3,.CPMAP## ;ADDRESS OF THIS CPU'S MAP
IORM T2,(T3) ;TURN ON "KEEP ME" IF THIS CPU HAS AN MCA25
AOS T3 ;NEXT PAGE
SOJG T1,.-2 ;FOR ALL LOW SEGMENT PAGES
>; END IFN FTKL10
PUSHJ P,SCDINI## ;INITIALIZE SCHEDULER
SUBTTL INITIALIZE ALL I/O DEVICES
IFN FTKL10,<PIBITS==PI.CPI!PI.TFP!PI.OFF!LI.ACO!LI.CPP> ;KL10 PI BITS
IFN FTKS10,<PIBITS==PI.CPI!PI.TFP!PI.OFF!SI.ACO!SI.CPP> ;KS10 PI BITS
IOGO: CONO PI,PIBITS ;CLEAR PI SYSTEM (AND MEM PARITY)
IFN FTKL10,<
CONO APR,LP.CSF!LP.PAR ;CLEAR PARITY ERROR
>; END IFN FTKL10
IFN FTKS10,<
WRAPR SP.DSF!SP.CSF!SP.HMP!SP.SMP!SP.NXM ;CLEAR PARITY/NXM ERROR
>; END IFN FTKS10
CONO APR,APRNUL## ;SET UP THE APR (DON'T DO I/O RESET)
HRRZS .CPMPC## ;CLEAR SERIOUS PARITY ERROR FLAG WHICH
; CAUSES HALT AFTER CTY PRINTING
;CALL DEVICE-SPECIFIC INITIALIZATION ROUTINE FOR EACH DEVICE
IOGO1: HLRZ P3,DEVLST## ;ADDR OF FIRST DDB
SETZB S,SAVITM
IOGO3: MOVE F,P3 ;SET UP F FOR INITIALIZATION CODE
; (NOT ALWAYS USED)
MOVE P3,DEVSER(P3)
IFN FTMP,<
LDB T1,DEYCPF## ;CPU OWNING THE DEVICE
CAIE T1,CPFBOO## ;GENERIC BOOT CPU?
CAIN T1,CPFBIT## ;FOR DUAL PORTED BEASTY?
JRST IOGO4 ;YES, THAT'S US
CAME T1,.CPCPN## ;THIS CPU?
JRST IOGO5 ;NO
IOGO4:
>; END IFN FTMP
HRRZ T1,P3
CAIE T1,@SAVITM ;SAME DEVICE
PUSHJ P,DINI(P3) ;NO. INITIALIZE IT.
HRRZM P3,SAVITM ;SKIPS IF CODE TO BE CALLED FOR EACH DEVICE
IOGO5: HLRZS P3
JUMPN P3,IOGO3 ;GO IF MORE DEVICES
SETZM DINITF## ;NO LONGER INITIALIZING
IFN FTRTTRP,<PUSHJ P,RTINI##> ;INITIALIZE PI CHANNELS AND RT DEVICES
IFN FTLOCK,<PUSHJ P,LOKINI##> ;INITIALIZATION FOR LOCK UUO
SUBTTL TIME AND ACCOUNTING INITIALIZATION
TACINI: MOVE T1,TIME## ;GET TIME OF DAY AS UPDATED DURING TTY LOOP
MOVE T2,TICSEC## ;TICS PER SECOND
LSH T2,-1 ;DIVIDE BY 2
ADD T1,T2 ;AND ROUND
IDIV T1,TICMIN## ;MINUTES IN T1, REMAINDER IN TICS
PUSH P,T2 ;SAVE REMAINDER
IDIVI T1,^D60 ;HOURS IN T1, MINUTES IN T2
MOVEM T1,LOCHOR## ;UPDATE GETTAB HOURS
MOVEM T2,LOCMIN## ;AND MINUTES
POP P,T1 ;GET BACK REMAINING TICS
IDIV T1,TICSEC## ;AND ROUND TO SECONDS
MOVEM T1,LOCSEC## ;AND STORE
SUBI T1,^D60 ;-VE SECONDS UNTIL NEXT MINUTE
MOVNM T1,.CPSEC## ;STORE POSITIVE NUMBER FOR ONCE-A-MINUTE CALLS
SUB T2,TICSEC## ;-VE TICKS UNTIL NEXT SECOND
MOVNM T2,.CPHTM## ;STORE POSITIVE FOR ONCE-A-SECOND CALLS
PUSHJ P,SUDATE## ;SET UP UNIVERSAL DATE-TIME
PUSHJ P,CHKMNT## ;CHECK IF WENT PAST MIDNIGHT
MOVE T1,TIME## ;GET UPDATED TIME OF DAY
MOVEM T1,.CPTML## ;INITIALIZE LAST TIME OF DAY
PUSHJ P,SETIME## ; TO INITILIZE GETIME
PUSHJ P,OMSTIM## ;COMPUTE TIME TO FIRST OPR MESSAGE
IFN FTKL10,<
MOVE T3,.CPAPD## ;PROCESSOR HARDWARE OPTIONS
DMOVE T1,[M.EBPS## ;ASSUME A MODEL A PROCESSOR
M.MBPS##]
TRNE T3,ID.XKL ;IS IT A MODEL B PROCESSOR?
DMOVE T1,[^D30*M.EBPS##/^D25 ;YES, USE DIFFERENT EBOX/MBOX CALABRATION CONSTANTS
^D30*M.MBPS##/^D25]
MOVEM T1,.CPEBS## ;STORE AS EBOX TICS/SEC
MOVEM T2,.CPMBS## ;STORE AS MBOX TICS/SEC
IDIV T1,TICSEC## ;AND NOW GET EBOX COUNTS/JIFFY
IMULI T1,.EBCPT ;MULITPLY BY EBOX COUNTS/TICK
MOVEM T1,.CPEBJ## ;STORE IN CDB VARIABLE
MOVE T1,.CPMBS## ;GET MBOX TICKS/SECOND
IDIV T1,TICSEC## ;GET MBOX COUNTS/JIFFY
IMULI T1,.MBCPT ;MULTIPLY BY MBOX COUNTS/TICK
MOVEM T1,.CPMBJ## ;SAVE
PUSHJ P,TIMINI ;START JIFFIES COMING
IFN FTEMRT,<
PUSHJ P,ACCMON## ;START UP ACCOUNTING METERS
PUSHJ P,CLREMB## ;CLEAR OUT E AND MBOX ACCOUNTING METERS
PUSHJ P,ABKCHK## ;CHECK & POSSIBLY SET EXEC MODE ADDRESS BREAK
>;END IFN FTEMRT
>;END IFN FTKL10
IFN FTKS10,<
PUSHJ P,TIMINI ;START JIFFIES COMING
>; END IFN FTKS10
SUBTTL INITIALIZE TABLE OF AVAILABLE EXEC VIRTUAL MEMORY
MOVE T1,EVMPTR## ;AOBJN POINTER TO EVBTAB
SETZM (T1) ;INITIALIZE TO ALL BITS OFF
AOBJN T1,.-1 ;SET EVERY WORD IN THE TABLE
MOVE T1,[-1_-<^D<512-36*<512/36>>>]
MOVEM T1,EVBTAB##+^D<512/36>
MOVE T3,SYSSIZ## ;FROM 0 THROUGH SYSSIZ
LSH T3,W2PLSH ;NUMBER OF PAGES
MOVSI T4,^D36 ;STARTING AT PAGE 0
HRRI T4,EVBTAB##+0 ;WHERE IN THE TABLE
MOVEM T3,.C0EVU## ;ACCUMULATE PAGES USED
PUSHJ P,CSETOS## ;MARK THE BITS (NOT AVAILABLE FOR EVM)
MOVEI T3,HLCSAD##/PAGSIZ ;FIRST PAGE OF NON-CODE SPACE
IDIVI T3,^D36 ;WORD NUMBER AND BIT POSITION
SUBI T4,^D36
MOVNS T4 ;BIT POSITION
MOVSS T4 ;TO THE LEFT HALF
HRRI T4,EVBTAB##(T3) ;STARTING WORD WITHIN TABLE
MOVEI T3,<<1,,0>-HLCSAD##>/PAGSIZ ;NUMBER OF PAGES
ADDM T3,.C0EVU## ;ACCUMULATE PAGES USED
PUSHJ P,CSETOS## ;MARK OFF BITS REPRESENTING FS AND PP SLOTS
IFN FTXMON,<
MOVEI T3,CSBORG##/PAGSIZ ;ORIGIN OF COMMON SUBROUTINES
IDIVI T3,^D36 ;WORD NUMBER AND BIT POSITION
SUBI T4,^D36
MOVNS T4 ;MAKE AN AOBJN POINTER
MOVSS T4
HRRI T4,EVBTAB##(T3)
MOVE T3,CSBLEN## ;GET LENGTH OF COMMON SUBRTNS PSECT
TRZE T3,PG.BDY ;ROUND UP
ADDI T3,PAGSIZ
LSH T3,W2PLSH ;NUMBER OF BITS TO SET
ADDM T3,.C0EVU## ;ACCUMULATE PAGES USED
PUSHJ P,CSETOS## ;MONITOR PAGES ARE NOT AVAILABLE AS EVM
>; END IFN FTXMON
MOVEI T3,MONORG##/PAGSIZ ;ORIGIN OF HIGH SEGMENT
IDIVI T3,^D36 ;WORD NUMBER AND BIT POSITION
SUBI T4,^D36
MOVNS T4 ;MAKE AN AOBJN POINTER
MOVSS T4
HRRI T4,EVBTAB##(T3)
MOVE T3,MONVFF## ;FIRST FREE VIRTUAL LOCATION ABOVE THE MONITOR
SUBI T3,MONORG## ;MINUS START OF THE MONITOR
LSH T3,W2PLSH ;NUMBER OF BITS TO SET
ADDM T3,.C0EVU## ;ACCUMULATE PAGES USED
PUSHJ P,CSETOS## ;MONITOR PAGES ARE NOT AVAILABLE AS EVM
MOVE P1,EVMPTR## ;AOBJN POINTER TO EVM TABLE
MOVEI P2,0
MOVEI P3,-1
PUSHJ P,GETZ## ;FIND THE LARGEST CONTIGUOUS PIECE OF EVM
MOVEM P2,EVBMAX## ;STORE THAT AS THE LARGEST IOWD SIZE
MOVEI T1,^D512 ;MAXIMUM SIZE OF EVM
SUB T1,.C0EVU## ;MINUS AMOUNT USED BY MONITOR
MOVEM T1,.C0EVM## ;NUMBER OF PAGES AVAILABLE FOR LOCKING IN EVM
SETZM .C0EVU## ;NUMBER OF PAGES IN USE FOR LOCKING IN EVM
SUBTTL MISCELLANEOUS INITIALIZATION
IFN FTKL10,<
PUSHJ P,GIVPMR## ;INITIALIZE PERFORMANCE METER
SETOM .CPPTF## ;INITIALIZE FLAG WHICH ALLOWS IO PAGE TABLE
>; END IFN FTKL10
PUSHJ P,WRTLOK ;WRITE LOCK CODE SEGMENTS
IFE FTXMON,<
JRSTF @[EXP IC.UOU+.+1] ;LIGHT USER IOT IN THE PC
>; END IFE FTXMON
IFN FTXMON,<
XJRSTF [IC.UOU
0,,.+1] ;SAME BUT ENTER SECTION 0
>; END IFN FTXMON
MOVEI T1,0 ;USER APR ENABLE BITS
PUSHJ P,SETCNA## ;SETUP APR ENABLE BITS AND CONSO MASK
EXECAC ;MAKE SURE AC BLOCKS ARE OK
IFN FTKL10,<
PUSHJ P,SETCSH## ;SET CACHE STRATEGY AS ESTABLISHED BY KLI
CONO APR,LP.CSF+LP.CSD ;CLEAR CACHE SWEEP DONE
SWPUA ;SWEEP CACHE, UNLOAD ALL
CONSO APR,LP.CSD ;WAIT UNTIL COMPLETED
JRST .-1
CONO APR,LP.CSF+LP.CSD ;CLEAR CACHE SWEEP DONE
CONO PAG,@.CPEBR## ;ENABLE CACHE IF DESIRED
>; END IFN FTKL10
IFN FTKS10,<
WREBR @.CPEBR##
PUSHJ P,ENAKAL## ;ENABLE KEEP-ALIVE COUNTING
>; END IFN FTKS10
SETZM .USPFW ;CLEAR NULL JOB'S PAGE FAIL WORD
SUBTTL NETWORK INITIALIZATION
IFN FTKS10,<PUSHJ P,KDPONC##> ;GO INIT THE KMC/DUP LINES
IFN FTNET,<
ANFSTR: PUSHJ P,NETINI## ;INITIALIZE ANF-10
>; END IFN FTNET
FEKSTR:
IFN FTENET,<PUSHJ P,D8EINI##> ;INITIALIZE ANF/ETHERNET FEK SERVICE
MOVEI J,FEKFST## ;GET THE ADDR OF FIRST FEK (0 IF NONE)
JRST FEKST2 ;ENTER FEK "ONCE ONLY" LOOP
FEKST1: MOVEI T1,FF.ONC ;GET THE "ONCE ONLY" FUNCTION CODE
XCT FEKDSP(J) ;CALL THE "DISPATCH ROUTINE"
HRRZ J,FEKBLK(J) ;STEP TO THE NEXT FEK
FEKST2: JUMPN J,FEKST1 ;IF NO MORE FEKS, GO CONTINUE SYSINI
IFN FTDECNET,<
D36STR: PUSHJ P,D36INI## ;INITIALIZE DECNET
>; END IFN FTDECNET
IFN FTENET,<
LATSTR: PUSHJ P,LATINI## ;INITIALIZE LAT TERMINAL SERVICE
IFN FTKL10,<
LLMSTR: PUSHJ P,LLMINI## ;INITIALIZE LLMOP
>; END IFN FTKL10
>; END IFN FTENET
IFN FTKS10,<PUSHJ P,DMRONC##> ;INITIALIZE THE DMR11 LINES
SUBTTL FINAL CPU AND DEVICE INITIALIZATION
CONO APR,APRNUL## ;CLEAR ALL APR ERRORS (DO NOT DO RESET)
CONO PI,PI.CPI!PI.TNP!PI.ON!II.ACO!IFN FTKL10,<PI.EPE> ;TURN ON ALL PI CHANNELS (ENABLE MEM PARITY)
IFN FTKL10,<PUSHJ P,STAPPC##> ;INITIALIZE PRIMARY PROTOCOL
IFN FTMP,<PUSHJ P,BECOM1##> ;ESTABLISH "CTY" ON BOOT PROCESSOR
PUSHJ P,SYSRLD ;MAKE SYSTEM RELOAD ENTRY IN ERROR.SYS
PUSHJ P,SYSAVL ;MAKE SYSTEM RELOAD ENTRY IN AVAIL.SYS
PUSHJ P,CTXINI## ;COMPUTE SYSTEM CONTEXT QUOTAS BASED ON
; THE NUMBER OF JOBS AND THE AMOUNT OF
; SWAPPING SPACE AVAILABLE
PUSHJ P,FRCCPY## ;COPY ANY CRASHES
MOVEI T1,DF.BPT ;GET MASK OF ALL CPU BREAKPOINT ENABLE BITS
MOVEI T2,JS.BPT ;GET THE "SET EDDT BREAKPOINT" ON BIT
TDNE T1,DEBUGF## ;ANY CPUS SET TO BREAKPOINT?
IORM T2,JBTSTS##+0 ;YES--ALLOW ^D TO DO IT'S THING
PUSHJ P,CSHINI## ;INIT MONITOR DISK CACHE
MOVSI T1,(CAI) ;SETUP NO-OP IN CASE NO EDDT
NODDT: HLLM T1,SYSDDT## ;TURN 401 INTO A CAI UNLESS EDDT STILL AROUND
MOVE T1,[<PM.DCD>B2+PM.WRT+PM.PUB+<DOORBL##/PAGSIZ>] ;STORE MAPPING
MOVEM T1,NLUPMP##(T1) ; FOR DOORBELL
MOVE 17,[SYSINH,,2] ;BLT REMAINDER OF INITIALIZATION CODE INTO ACS
BLT 17,7
MOVE 0,[NUPPPM##,,NUPPPM##+1] ;SET UP BLT WORD IN AC 0
JRST 2 ;FINISH UP
SYSINH: SETZM NUPPPM## ;(2) ZERO PER-PROCESS MAPPING IN NULL JOB'S MAP
BLT 0,NLUPMP##+.UMUPM-1 ;(3)
CLRPGT ;(4) FLUSH OLD MAPPING
IFN FTMP,<
MOVEI 0,1 ;(5)
MOVEM 0,ONCCOM## ;(6) TELL ALL CPUS TO START
>; END IFN FTMP
SJSP U,NULJB1## ;(7) START THE NULL JOB (U NON-ZERO)
IFE FTMP,<EXP 0,0> ;PAD OUT THE BLOCK
SUBTTL ERROR.SYS/SYSTEM RELOAD
SYSRLD: HLLZ T1,NXMPTR## ;GET NXMTAB POINTER
HRR T1,@SRLTBL+.EXHDR+13 ;AND OFFSET TO WHY RELOAD COMMENTS
ADDI T1,WHYSIZ## ;ADVANCE TO START OF NXMTAB STORAGE
MOVEM T1,SRLNXM ;SAVE
HLLZ T1,SRLTBL+.EXFLG ;GET -VE LENGTH OF XFER TABLE
ADD T1,[-WHYSIZ##,,0] ;PLUS -VE LENGTH OF WHY RELOAD COMMENT
ADD T1,NXMPTR## ;PLUS -VE LENGTH OF NXMTAB
HLRES T1 ;GET FULL WORD COUNT
MOVMS T1 ;MAKE POSITIVE
PUSHJ P,ALCSEB## ;ALLOCATE A SYSTEM ERROR BLOCK
POPJ P, ;NO CORE
HRRZ T2,@SRLTBL+.EXHDR+13 ;GET OFFSET TO COMMENT STORAGE
ADDI T2,1(T1) ;RELOCATE
MOVSI T3,WHYTXT## ;POINT TO WHY RELOAD COMMENTS
HRRI T3,(T2) ;MAKE A BLT POINTER
BLT T3,WHYSIZ##-1(T2) ;COPY COMMENTS
HRRZ T2,@SRLTBL+.EXHDR+15 ;GET OFFSET TO NXMTAB STORAGE
ADDI T2,1(T1) ;RELOCATE
HLRE T3,NXMPTR## ;GET -VE LENGTH
MOVMS T3 ;MAKE POSITIVE
ADDI T3,(T2) ;COMPUTE END OF BLOCK
HRLZ T4,NXMPTR## ;POINT TO NXMTAB
HRRI T4,(T2) ;MAKE A BLT POINTER
BLT T4,-1(T3) ;COPY NXMTAB
XMOVEI T2,SRLTBL ;POINT TO TRANSFER TABLE
PUSHJ P,XFRSEB## ;FILL REMAINDER AND QUEUE UP BLOCK
JFCL ;SHOULDN'T FAIL
POPJ P, ;RETURN
SRLTBL: SEBTBL (.ERWHY,SRLEND,EX.QUE)
MOVE CONFIG##+0 ;(R00) SYSTEM NAME
MOVE CONFIG##+1 ;(R01)
MOVE CONFIG##+2 ;(R02)
MOVE CONFIG##+3 ;(R03)
MOVE CONFIG##+4 ;(R04)
MOVE SYSDAT##+0 ;(R05) SYSTEM BUILD DATE
MOVE SYSDAT##+1 ;(R06)
MOVE STATES## ;(R07) MONITOR STATES WORD
MOVE CNFDVN## ;(R10) MONITOR VERSION
MOVE SERIAL## ;(R11) POLICY CPU SERIAL NUMBER
MOVE WHYCOD## ;(R12) "WHY RELOAD" CODE
MOVE [-WHYSIZ##,,23] ;(R13) "WHY RELOAD" COMMENTS POINTER
MOVE [707070,,1] ;(R14) SYSERR CODE,,PAGING HARDWARE
MOVE SRLNXM ;(R15) NXMTAB POINTER
SRLEND: ;END OF TABLE
SUBTTL AVAIL.SYS/SYSTEM RELOAD
SYSAVL: MOVE T1,DATE## ;GET CURRENT UDT
SUB T1,SYSUPT## ;COMPUTE TIME OF RELOAD
MOVEM T1,LODTIM ;SAVE FOR AVAIL
PUSH P,LOCYER## ;SAVE YEAR
PUSH P,LOCMON## ;SAVE MONTH
PUSH P,LOCDAY## ;SAVE DAY
PUSH P,LOCHOR## ;SAVE HOUR
PUSH P,LOCMIN## ;SAVE MINUTE
PUSH P,LOCSEC## ;SAVE SECOND
PUSH P,DATE## ;SAVE CURRENT DATE/TIME
PUSH P,DATREM## ;AND REMAINDER
LDB T1,[POINT 12,CRSSAV,26] ;GET CRASH YEAR
MOVEM T1,LOCYER## ;STORE YEAR
LDB T1,[POINT 5,CRSSAV,31] ;GET CRASH MONTH
MOVEM T1,LOCMON## ;STORE MONTH
LDB T1,[POINT 4,CRSSAV,35] ;GET CRASH DAY
MOVEM T1,LOCDAY## ;STORE DAY
SUBI T1,^D1970 ;SUBTRACT BASE
HRRZ T1,CRSDTM ;GET TIME
IDIVI T1,^D60*^D60 ;GET HOURS
IDIVI T2,^D60 ;GET MIN
MOVEM T1,LOCHOR## ;STORE HOURS
MOVEM T2,LOCMIN## ;STORE MIN
MOVEM T3,LOCSEC## ;STORE SECONDS
PUSHJ P,SUDATE## ;GENERATE UDT
MOVE T1,DATE## ;GET CRASH DATE/TIME
MOVEM T1,CRSSAV ;SAVE IT AWAY
POP P,DATREM## ;RESTORE DATE/TIME REMAINDER
POP P,DATE## ;RESTORE CURRENT UDT
POP P,LOCSEC## ;RESTORE SECOND
POP P,LOCMIN## ;RESTORE MINUTE
POP P,LOCHOR## ;RESTORE HOUR
POP P,LOCDAY## ;RESTORE DAY
POP P,LOCMON## ;RESTORE MONTH
POP P,LOCYER## ;RESTORE YEAR
SETZ T1, ;CAUSE SEB ALLOCATION TO HAPPEN
XMOVEI T2,AVLTBL ;POINT TO TRANSFER TABLE
PUSHJ P,XFRSEB## ;FILL AND QUEUE UP RECORD
JFCL ;NO CORE
POPJ P, ;RETURN
;TRANSFER TABLE FOR AVAIL.SYS
AVLTBL: SEBTBL (.ERMRV,AVLEND,<EX.QUE!EX.NER!EX.AVL>)
MOVE [-5,,7] ;(R00) OFFSET TO ASCIZ SYSTEM NAME
MOVE CNFDVN## ;(R01) MONITOR VERSION
MOVE SYSUPT## ;(R02) UPTIME
MOVE CRSSAV ;(R03) MONITOR CRASH TIME (+/- 6 MINUTES)
MOVE LODTIM ;(R04) MONITOR RELOAD TIME
MOVE WHYCOD## ;(R05) "WHY RELOAD" CODE
SETZ ;(R06) SUM INCR DATE/TIME CHANGES SINCE RELOAD
MOVE CONFIG##+0 ;(R07) SYSTEM NAME
MOVE CONFIG##+1 ;(R10)
MOVE CONFIG##+2 ;(R11)
MOVE CONFIG##+3 ;(R12)
MOVE CONFIG##+4 ;(R13)
AVLEND: ;END OF TABLE
SUBTTL MULTI-CPU I/O PROCESSING
IFN FTMP,<
; UDBS
CPUUNI::DMOVEM T1,CPUACS+T1 ;SAVE TEMPS
DMOVEM T3,CPUACS+T3 ;...
MOVE T1,UDBCAM(U) ;GET TARGET CPU NUMBER
PUSHJ P,CAMCPU## ;DETERMINE CPU NUMBER TO USE
DMOVE T2,CPUACS+T2 ;GET TEMPS BACK
MOVE T4,CPUACS+T4 ;...
CPUCPN::! ;CPU NUMBER ALREADY IN T1
CPUXCT: SKIPN .UONCE## ;IF TWICE, NO OTHER CPU TO WORRY ABOUT
CAMN T1,.CPCPN## ;IS IT US?
JRST CPUXC4 ;GO HANDLE REQUEST ON OUR CPU
PUSH P,T2 ;SAVE T2 A SEC
MOVEI T2,1 ;GET ASYNCH IO PENDING BIT FOR CPU0
LSH T2,(T1) ;POSITION IT FOR A TEST OF TARGET CPU
;THE PARANOID MIGHT WANT TO CPUTIM-OUT THIS LOOP...
TDNE T2,CPUASF ;SEE IF STILL PROCESSING A PREVIOUS COMMAND
JRST .-1 ; ON THIS CPU. WAIT TILL DONE IF SO.
IORM T2,CPUASF ;REMEMBER THAT IT IS NOW BUSY
POP P,T2 ;RESTORE T2
MOVEM T1,CPUNUM ;SAVE TARGET CPU NUMBER
SETZM CPUFLG ;INITIALLY SET FAILURE FLAG
MOVE T1,CPUACS+T1 ;RESET T1 SO BLT DOESN'T CLOBBER SAVED COPY
MOVEM 0,CPUACS+0 ;SAVE AC 0
MOVE 0,[1,,CPUACS+1] ;SET UP BLT
BLT 0,CPUACS+17 ;SAVE THE ACS
MOVE 0,CPUACS+0 ;RELOAD AC 0
XMOVEI T1,@(P) ;GET ADDRESS OF SUBROUTINE
MOVE T2,CPUNUM ;GET TARGET CPU NUMBER
MOVE T3,@T1 ;GET SUBROUTINE TO EXECUTE (WITH FLAGS)
MOVEM T3,CPUSUB ;SAVE IT'S ADDRESS
POP P,(P) ;PRUNE STACK
MOVEM P,CPUACS+P ;UPDATE PUSH DOWN LIST POINTER
MOVE T1,CPUTMS ;TIME TO WAIT FOR CPU TO START PROCESSING
TLNN T3,(XC.LNG) ;LONG WAIT?
LSH T1,-2 ;NO, WAIT ONE FOURTH OF THE USUAL TIME
MOVE P1,T2 ;CPU INDEX
IMULI P1,.CPLEN## ;POINT TO THE TARGET CPU'S CDB
HLLOS ONCCOM## ;MARK REQUEST QUEUED
CPUXC1: SKIPE CRSHWD ;RELOADING SYSTEM BECAUSE OF STOPCD?
PJRST REBOOT## ;YES
TRNN T1,17 ;EVERY 20 TIMES THROUGH THIS
AOS .C0OK##(P1) ;BUMP CPU'S OK WORD SO IT WILL WAKE UP
SKIPE ONCCOM## ;HAS THE OTHER CPU STARTED PROCESSING YET?
SOJG T1,CPUXC1 ;NO--WAIT
MOVE T2,CPUSUB ;GET ADDRESS OF ROUTINE BEING CALLED
TLNE T2,(XC.ASY) ;WAS THIS AN ASYNCHRONOUS REQUEST?
JRST [JUMPN T1,CPUXC3 ;YES, JUMP IF CPU STARTED REQUEST
MOVE T1,.C0CPN##(P1) ;ASYNCH REQUEST DIDN'T START, CPU #
PUSHJ P,CPUDSB ;CLEAR I/O PENDING FOR NEXT REQUEST
JRST CPUXC3] ;AND EXIT
MOVE P2,T1 ;SYNCHRONOUS I/O, SAVE RESPONSE TIME
MOVE T1,.C0CPN##(P1) ;GET CPU NUMBER OF TARGET CPU
PUSHJ P,CPUDSB ;CLEAR I/O PENDING BIT
JUMPE P2,CPUXC3 ;NO RESPONSE
MOVE T1,CPUTIM ;GET CPU HUNG TIMER
MOVE T2,CPUSUB ;GET FLAGS
TLNN T2,(XC.LNG) ;LONG WAIT?
LSH T1,-2 ;NO, WAIT ONE FOURTH OF THE USUAL TIME
CPUXC2: SKIPE CRSHWD ;RELOADING SYSTEM BECAUSE OF STOPCD?
PJRST REBOOT## ;YES
SKIPL ONCCOM## ;REQUEST COMPLETED YET?
SOJG T1,CPUXC2 ;NO--WAIT
CPUXC3: SETZM ONCCOM## ;TELL OTHER CPUS TO LOOP IN THE ACS
MOVEM P,CPUACS+P ;SO BLT DOESN'T WIPE P
MOVSI 17,CPUACS ;SET UP BLT
BLT 17,17 ;RESTORE THE ACS
SKIPE CPUFLG ;SUCESS?
AOS (P) ;YES
POPJ P, ;PROPAGATE CPOPJ/CPOPJ1 BACK TO CALLER
CPUXC4: XMOVEI T1,@(P) ;GET ADDRESS OF SUBROUTINE
MOVE T1,@T1 ;GET SUBROUTINE TO EXECUTE
TLZ T1,-1 ;CLEAR FLAGS
MOVEM T1,CPUSUB ;SAVE IT'S ADDRESS
POP P,(P) ;TRIM STACK
MOVE T1,CPUACS+T1 ;RELOAD T1
PUSHJ P,@CPUSUB ;DO CPU DEPENDANT STUFF
POPJ P, ;FAILED
JRST CPOPJ1## ;RETURN
; STILL UNDER IFN FTMP
CPUDSP::MOVE T1,.CPCPN## ;GET OUR CPU NUMBER
CAME T1,CPUNUM ;SANITY CHECK
POPJ P, ;REQUEST IS FOR SOMEONE ELSE
MOVEM P,CPUACS+P ;SO BLT DOESN'T WIPE P
MOVSI 17,CPUACS ;SET UP BLT
BLT 17,17 ;LOAD OUR ACS
PUSH P,CPUSUB ;SAVE ROUTINE ADDRESS AND FLAGS
SETZM ONCCOM## ;START PROCESSING REQUEST
EXCH T1,(P) ;GET ROUTINE ADDRESS AND FLAGS
TLNE T1,(XC.ASY) ;SEE IF ASYNCHRNOUS IO
JRST CPUDSA ;IF SO, DO DIFFERENTLY
TLZ T1,-1 ;CLEAR FLAGS
EXCH T1,(P) ;PUT ROUTINE ADDRESS BACK - WITHOUT FLAGS
PUSHJ P,@(P) ;DO SOMETHING
SKIPA ;FAILURE
SETOM CPUFLG ;INDICATE SUCESS
ADJSP P,-1 ;TOSS ROUTINE ADDRESS
MOVEM 0,CPUACS+0 ;SAVE AC 0
MOVE 0,[1,,CPUACS+1] ;SET UP BLT
BLT 0,CPUACS+17 ;SAVE THE UPDATED ACS
SETOM ONCCOM## ;REQUEST COMPLETED
POPJ P, ;RETURN
;HERE IF REQUEST IS ASYNCHRONOUS
CPUDSA: TLZ T1,-1 ;CLEAR FLAGS
EXCH T1,(P) ;GET T1 BACK, SAVE ADDRESS WITHOUT FLAGS
PUSHJ P,@(P) ;DO WHATEVER WE DO
JFCL ;ASYNCHRONOUS I/O DOESN'T EXACTLY SKIP...
ADJSP P,-1 ;CLEAN SUBROUTINE ADDRESS OFF STACK
MOVE T1,.CPCPN## ;NOR DOES IT RETURN ACS. GET CPU NUMBER
CPUDSB: MOVEI T2,1 ;GET ASYNCHRONOUS IO BUSY BIT FOR CPU 0
LSH T2,(T1) ;POSITION IT FOR THIS CPU
ANDCAM T2,CPUASF ;CLEAR IO IN PROGRESS BIT
POPJ P, ;RETURN
> ;END IFN FTMP
SUBTTL GET DATE/TIME FROM ANY FE WILLING TO TALK
;ROUTINE TO ASK FRONT ENDS FOR DATE/TIME. RETURNS CPOPJ IF NONE
;KNOW THE DATE/TIME, CPOPJ1 IF ONE DOES.
GFETIM: PUSHJ P,SAVE1## ;SAVE AN AC
MOVSI P1,-M.CPU## ;TRY ALL CPUS
GFETM1: HRRZ T1,P1 ;SET UP CPU NUMBER
XCTCPU (CPN,SPCGDT##) ;ASK FE FOR DATE/TIME (DTESER/KSSER)
CAIA ;THIS CPU CAN'T HELP
JRST CPOPJ1## ;LOCxxx NOW MATCH FE
AOBJN P1,GFETM1 ;TRY NEXT POSSIBLE CPU
POPJ P, ;NONE WERE HELPFUL, RETURN FAILURE
SUBTTL SET UP NXMTAB
SUNXMT: PUSH P,P1 ;SAVE WORKING ACS
PUSH P,P2
SETZB T4,NXMTAB## ;ZERO HIGHEST EXISTANT ADDRESS SEEN, AND NXMTAB
MOVE T1,[NXMTAB##,,NXMTAB##+1]
MOVEI T2,NXMTAB## ; ..
BLT T1,NXMTBL##-1(T2)
MOVEI P1,CORBLK## ;NUMBER OF PAGES OF CORE POSSIBLE
MOVE T2,[POINT 1,NXMTAB##]
MOVEI T3,1 ;TO MARK A PAGE AS NON-EXISTANT
SETZ U, ;START LOOKING FOR NXM AT ADDRESS 0
SUNXM1: CONO APR,AP.NXE## ;CLEAR NXM FLAG
IBP T2 ;NEXT BYTE IN NXMTAB
MOVEI P2,MEMITL## ;NUMBER OF WAYS THE MEMORY CAN BE INTERLEAVED
SUNXM2: PUSH P,U ;SAVE THE CURRENT ADDRESS
ADDI U,-1(P2) ;CHECK PAGE PLUS INTERLEAVE OFFSET
PUSHJ P,REFMEM## ;REFERENCE TIS ADDRESS
POP P,U ;RESTORE THE CURRENT ADDRESS
SOJG P2,SUNXM2 ;LOOK AT NEXT ADDRESS WITHIN THIS PAGE
CONSO APR,AP.NXM## ;NON-EXISTANT MEMORY SEEN?
JRST SUNXM3 ;NO
DPB T3,T2 ;YES, MARK THE PAGE AS NON-EXISTANT
JUMPN T4,SUNXM4 ;JUMP IF THE LAST PAGE LOOKED AT WAS NXM
SKIPA T4,U ;NOT SO, SO REMEMBER THE ADDRESS OF HIGHEST
; EXISTANT PAGE SEEN SO FAR
SUNXM3: MOVEI T4,0 ;MEMORY EXISTS, HAVEN'T SEEN THE HIGHEST EXISTANT PAGE YET
SUNXM4: ADDI U,PAGSIZ ;GO ON TO THE NEXT PAGE OF MEMORY
SOJG P1,SUNXM1 ; PROVIDED ALL POSSIBLE MEMORY HASN'T BEEN CHECKED
SUNXM5: IDPB T3,T2 ;ONES TO THE END OF THIS WORD IN NXMTAB
TLNE T2,770000 ; ..
JRST SUNXM5 ; ..
SKIPN T4 ;SKIP IF THE HIGHEST POSSIBLE PAGE OF MEMORY DIDNT EXIST
MOVE T4,U ;IT DID, SO U CONTAINS THE ADDRESS OF THE HIGHEST PAGE
POP P,P2 ;RESTORE ACS
POP P,P1
POPJ P,
SUBTTL ONCE-ONLY/BOOTSTRAP INTERFACE -- FIXUP ASL/SSL/SDL FOR DEBUGGING
BOOTDB::SKIPN T3,DDTDSK ;WANT TO HACK THE ASL, ETC.?
POPJ P, ;NO
SE1ENT ;ENTER SECTION ONE
CAMN T3,[EXP -1] ;USE BOOTSTRAP DEVICE?
MOVE T3,DEVICE ;YES
MOVE T1,STRAOB## ;AOBJN POINTER
CAME T3,@TABSTR##(T1) ;MATCH SPECIFIED STRUCTURE NAME?
AOBJN T1,.-1 ;KEEP SEARCHING
JUMPGE T1,CPOPJ## ;GIVE UP IF JUNK SPECIFIED
MOVE T4,TABSTR##(T1) ;GET STR ADDR
HLRZ T4,STRUNI##(T4) ;GET UDB
MOVE T4,UNILOG##(T4) ;AND FINALLY THE LOGICAL UNITID
MOVEI T1,.BTSSL ;SSL
PUSHJ P,ZLIST ;FETCH, STORE & ZERO REMAINDER OF LIST
MOVEI T1,.BTSDL ;SDL
PUSHJ P,ZLIST ;FETCH, STORE & ZERO REMAINDER OF LIST
MOVE T3,T4 ;COPY LOGICAL UNITID
MOVEI T1,.BTASL ;ASL
PUSHJ P,ZLIST ;FETCH, STORE & ZERO REMAINDER OF LIST
POPJ P, ;RETURN
ZLIST: PUSHJ P,BTDATA## ;FETCH ADDRESS IN BOOTSTRAP VECTOR
JRST TPOPJ## ;NOT THERE--POP OFF CALLER AND RETURN
MOVEM T3,(T2) ;STORE IN LIST
AOBJP T1,CPOPJ## ;ACCOUNT FOR THE FIRST WORD
AOS T2 ;...
SETZM (T2) ;ZERO NEXT
AOBJN T1,.-2 ;CLEAN OUT THE TABLE
POPJ P, ;RETURN
SUBTTL ONCE-ONLY/BOOTSTRAP INTERFACE -- COPY NXMTAB
BOOTNX: SETOM NXMTAB## ;INITIALIZE NXMTAB TO -1'S
MOVE T1,[NXMTAB##,,NXMTAB##+1]
BLT T1,NXMTAB##+NXMTBL##-1
SKIPN U,BOOTPA ;PHYSICAL ADDRESS OF BOOT ORIGIN
JSP T4,BOOTN4 ;GIVE UP
ADDI U,.BTNAM ;OFFSET TO IDENTIFIER
PUSHJ P,REFMEM## ;FETCH
CAME T1,['BOOT '] ;SANITY CHECK
JSP T4,BOOTN4 ;DON'T KNOW HOW WE WERE BOOTED
MOVE U,BOOTPA ;BASE ADDRESS
ADDI U,.BTSIZ ;OFFSET TO SIZE WORD
PUSHJ P,REFMEM## ;FETCH
SKIPL T1 ;MUST BE NEGATIVE
JSP T4,BOOTN4 ;ELSE FATAL ERROR
MOVE U,BOOTPA ;BASE ADDRESS
ADDI U,.BTNXM ;OFFSET TO BOOT'S COPY OF NXMTAB
PUSHJ P,REFMEM## ;FETCH POINTER
HLRE T2,T1 ;GET -LENGTH
MOVNS T2 ;MAKE POSITIVE
CAILE T2,NXMTBL## ;BIGGER THAN THE ONE IN COMMON?
MOVEI T2,NXMTBL## ;YES, USE OUR LENGTH
MOVNS T2 ;NEGATE
HRLZS T2 ;MAKE AN AOBJN POINTER
HRRZ T3,T1 ;COPY OFFSET
ADD T3,BOOTPA ;COMPUTE PHYSICAL START ADDRESS
;LOAD UP OUR COPY OF NXMTAB ONE WORD AT A TIME
BOOTN1: HRRZ U,T2 ;GET OFFSET INTO BOOT'S NXMTAB
ADD U,T3 ;RELOCATE
PUSHJ P,REFMEM## ;FETCH WORD
MOVEM T1,NXMTAB##(T2) ;STORE IT
AOBJN T2,BOOTN1 ;LOOP FOR ALL WORDS
MOVEI T1,NXMTBL##-1 ;OFFSET OF LAST WORD IN NXMTAB
;SEARCH NXMTAB BACKWARDS LOOKING FOR THE HIGHEST EXISTANT PAGE
BOOTN2: MOVE T2,NXMTAB##(T1) ;GET A WORD FROM NXMTAB
CAMN T2,[EXP -1] ;36 NON-EXISTANT PAGES
SOJG T1,BOOTN2 ;KEEP SEARCHING
SKIPG T1 ;4096K SYSTEM?
DMOVE T1,[EXP NXMTBL##-1,0] ;YES
MOVEI T4,^D36 ;36 PAGES MAPPED PER WORD
BOOTN3: LSHC T2,-1 ;GET A BIT IN T3
SKIPGE T3 ;FOUND HIGHEST PAGE YET?
SOJA T4,BOOTN3 ;NO--LOOK TO THE NEXT ONE
IMULI T1,^D36 ;36 PAGES MAPPED PER WORD
ADDI T1,(T4) ;PLUS OVERFLOW
LSH T1,P2WLSH ;CONVERT HIGHEST PAGE TO HIGHEST ADDRESS
MOVEM T1,SYSORG## ;SAVE HIGHEST ADDR AS WHERE TO START ALLOCATING
POPJ P, ;RETURN
BOOTN4: STOPCD .,HALT,BNU, ;++BOOTSTRAP NXMTAB UNAVAILABLE
SUBTTL ONCE-ONLY/BOOTSTRAP INTERFACE -- ACCOUNT FOR CORE USAGE
;SUBROUTINE TO FIXUP SYSORG TO ACCOUNT FOR THE PRESENCE OF THE YET
;TO BE MAPPED BOOTSTRAP. THIS MUST BE DONE IMMEDIATELY AFTER SETTING
;UP NXMTAB AND BEFORE ANY SECTION MAPS ARE ALLOCATED. OTHERWISE,
;PORTIONS OF THE BOOTSTRAP MAY BE TAKEN FOR A SECTION MAP.
BOOTSZ: SKIPN P1,BOOTPA ;PHYSICAL ADDRESS OF BOOT ORIGIN
JRST BOOTZA ;NOT THERE--GO ZERO ADDRESSES
MOVE U,P1 ;COPY IT
HRRI U,.BTNAM(P1) ;POINT TO IDENTIFIER
PUSHJ P,REFMEM## ;FETCH
CAME T1,['BOOT '] ;SANITY CHECK
JRST BOOTZA ;DON'T KNOW HOW WE WERE BOOTED
HRRI U,.BTSIZ(P1) ;OFFSET TO SIZE WORD
PUSHJ P,REFMEM## ;FETCH
JUMPGE T1,BOOTZA ;MUST BE NEGATIVE
HLRE T2,T1 ;GET -PAGE COUNT
MOVNS T2 ;MAKE POSITIVE
HRRZ T3,T1 ;ISOLATE LENGTH IN WORDS
ADDI T3,PAGSIZ ;ROUND UP A PAGE
LSH T3,W2PLSH ;CONVERT TO A PAGE NUMBER
CAME T3,T2 ;MUST MATCH
JRST BOOTZA ;NOT GOOD
HLRES T1 ;GET -LENGTH IN PAGES
LSH T1,P2WLSH ;CONVERT TO -WORD COUNT
MOVEM P1,SYSORG## ;START ALLOCATING AT BOTTOM OF BOOTSTRAP
SUB P1,T1 ;DETERMINE END OF BOOTSTRAP
MOVEM P1,BTSPFF ;SAVE FOR KLUDGERY AT BOOTMP
POPJ P, ;RETURN
BOOTZA: SETZM BOOTPA ;CLEAR PHYSICAL ADDRESS
SETZM BOOTVA## ;CLEAR VIRTUAL ADDRESS
POPJ P, ;RETURN
BTSPFF: 0 ;FIRST PHYSICAL ADDRESS FOLLOWING BOOTSTRAP
; USED TO FAKE OUT ONCMAP TO ALLOCATE THE
; PHYSICAL PAGES CONTAINING THE BOOTSTRAP
SUBTTL ONCE-ONLY/BOOTSTRAP INTERFACE -- MAP BOOTSTRAP
BOOTMP: SKIPN P1,BOOTPA ;PHYSICAL ADDRESS OF BOOT ORIGIN
POPJ P, ;NOT THERE
MOVE U,P1 ;COPY ADDRESS
HRRI U,.BTSIZ(P1) ;OFFSET TO SIZE WORD
PUSHJ P,REFMEM## ;FETCH
HLLZ P2,T1 ;PRESERVE -LENGTH IN PAGES
IFN FTXMON,<
MOVSI T1,(MS.RLC) ;SECTION NUMBER FOR RELOCATABLE CODE
PUSHJ P,ALCSMP ;ALLOCATE A MAP IF NECESSARY
>; END IFN FTXMON
MOVE T1,.CPEPT## ;POINT TO THIS CPU'S MAP
ADDI T1,SECTAB+(MS.RLC) ;OFFSET INTO THE SECTION MAP TABLE
MOVE T2,(T1) ;GET MAP POINTER
MOVE T1,.CPMAP## ;GET ADDRESS OF SECTION ZERO MAP
MOVEM T2,.EUPMP/PAGSIZ(T1) ;MAKE THE MAP ADDRESSABLE
IFE FTXMON,<
HRRZ T2,MONVFF## ;GET FIRST FREE ABOVE HIGH SEGMENT
LSH T2,W2PLSH ;CONVERT TO A PAGE NUMBER
HRRI T1,.EUPMP(T2) ;START HERE
ADDI T2,-PAGSIZ ;GET -REMANING PAGE COUNT IN T2
HRL T1,T2 ;MAKE AN AOBJN POINTER
>; END IFE FTXMON
IFN FTXMON,<
MOVSI T1,-PAGSIZ ;PAGES PER SECTION
HRRI T1,.EUPMP ;START OF SECTION MAP
>; END IFN FTXMON
HRR P2,T1 ;PRESERVE SECTION MAP ADDRESS
BOOTM1: HLL T2,P2 ;GET -PAGE COUNT
BOOTM2: SKIPE (T1) ;PAGE IN USE?
JRST BOOTM1 ;YES--TRY ANOTHER
AOBJP T1,BOOTZA ;GIVE UP IF SECTION IS FULL
AOBJN T2,BOOTM2 ;LOOP FOR THE REQUIRED NUMBER OF PAGES
ANDI T1,PG.BDY ;KEEP ONLY ENDING PAGE NUMBER
HLRE T2,P2 ;GET -LENGTH IN PAGES
ADDI T2,(T1) ;COMPUTE STARTING VIRTUAL PAGE NUMBER
LSH T2,P2WLSH ;CONVERT TO AN ADDRESS
HRLI T2,(MS.RLC) ;INCLUDE SECTION NUMBER FOR RELOCATABLE CODE
MOVEM T2,BOOTVA## ;SAVE ADDRESS
HLRE T1,P2 ;-PAGES NEEDED
MOVNS T1 ;MAKE POSITIVE
LSH T1,P2WLSH ;CONVERT TO A WORD COUNT
MOVSI T2,(<PM.DCD>B2+PM.WRT+PM.PUB+PM.SWB) ;DIRECT POINTER + WRITABLE
PUSH P,SYSORG## ;SAVE SYSORG
PUSH P,MONVFF## ;WILL BE CHANGED BY ONCMAP
MOVE T3,BTSPFF ;FIRST PHYSICAL ADDRESS FOLLOWING BOOTSTRAP
MOVEM T3,SYSORG## ;RESET SYSORG SO WE MARK THOSE PAGES AS TAKEN
PUSHJ P,ONCMAP ;MAP THE PAGES
POP P,MONVFF## ;RESTORE FIRST FREE
POP P,SYSORG## ;RESTORE SYSORG
MOVE T1,P1 ;GET STARTING PHYSICAL ADDRESS
LSH T1,W2PLSH ;CONVERT TO A PAGE NUMBER
HRLI T1,(<PM.DCD>B2+PM.WRT+PM.PUB+PM.SWB) ;DIRECT POINTER + WRITABLE
BOOTM3: MOVEM T1,(P2) ;STORE IN SECTION MAP
AOS T1 ;ADVANCE TO NEXT PAGE
AOBJN P2,BOOTM3 ;LOOP
CLRPT .EUPMP ;MAKE NEW MAPPING VISIBLE
IFE FTXMON,<
MOVE T1,BOOTVA## ;VIRTUAL ADDRESS OF BOOT
HLRE T1,.BTSIZ(T1) ;- LENGTH IN PAGES OF BOOT
MOVMS T1 ;LENGTH IN PAGES
LSH T1,P2WLSH ;LENGTH IN WORDS
ADDM T1,MONVFF## ;UPDATE TO REFLECT PAGES ALLOCATED FOR BOOT
>; END IFE FTXMON
POPJ P, ;DONE
SUBTTL ONCE-ONLY/BOOTSTRAP INTERFACE -- COPY MONITOR FILESPEC
BOOTFX: SKIPN W,BOOTPA ;PHYSICAL ADDRESS OF BOOT ORIGIN
POPJ P, ;NOT THERE
MOVE U,W ;COPY IT
HRRI U,.BTSIZ(W) ;POINT TO SIZE WORD
PUSHJ P,REFMEM## ;FETCH
HRRI U,.BTDEV(W) ;POINT TO START OF FILESPEC
MOVSI T2,-BOOTLN ;-LENGTH OF TRANSLATION TABLE
BOOTF1: HLRZ U,BOOTBL(T2) ;GET AN OFFSET
ADD U,W ;INDEX INTO BOOT VECTOR
PUSHJ P,REFMEM## ;FETCH WORD
HRRZ T3,BOOTBL(T2) ;GET STORAGE LOCATION
MOVEM T1,@T3 ;SAVE WORD
AOBJN T2,BOOTF1 ;LOOP
MOVE T1,DEVICE ;WORD FOR STRUCTURE
SETO T2, ;VALUE TO COMPARE
CAMN T2,DDTDSK ;IF WANT TO USE BOOT STRUCTURE,
MOVEM T1,DDTDSK ;UPDATE THE NAME
POPJ P, ;DONE
BOOTBL: .BTDEV,,DEVICE ;DEVICE
.BTFIL,,FNAME ;FILE NAME
.BTEXT,,FEXT ;EXTENSION
.BTPTH+0,,PPN ;PPN
.BTPTH+1,,SFDLST+0 ;SFD #1
.BTPTH+2,,SFDLST+1 ;SFD #2
.BTPTH+3,,SFDLST+2 ;SFD #3
.BTPTH+4,,SFDLST+3 ;SFD #4
.BTPTH+5,,SFDLST+4 ;SFD #5
BOOTLN==.-BOOTBL ;LENGTH OF TABLE
SUBTTL ONCE-ONLY/BOOTSTRAP INTERFACE -- BUILD BOOTXT
BSTRNG: SKIPN W,BOOTPA ;PHYSICAL ADDRESS OF BOOT ORIGIN
POPJ P, ;NOT THERE
MOVEI T1,BOOTYO ;ROUTINE TO BUILD UP STRING
MOVEM T1,.CPTOA## ; SAVE AS TTY OUTPUT ROUTINE
MOVE T1,[POINT 7,BOOTXT##] ;BYTE POINTER
MOVEM T1,BOOTBP ;STORE THE POINTER
MOVEI T1,[ASCIZ ./D .];FIRST DO A DUMP
PUSHJ P,CONMES## ; ..
SKIPN T2,DEVICE ;A DEVICE SPECIFIED?
POPJ P, ;NO, LEAVE DEFAULT ALONE
MOVEM T2,STRMON##
PUSHJ P,PRNAME## ;YES--PUT IN COMMAND STRING
MOVEI T1,[ASCIZ /:/] ;DELIMIT WITH A COLON
PUSHJ P,CONMES## ; ..
SKIPN T2,FNAME ;FILE NAME?
JRST BSTRN2 ;NO
MOVEM T2,FILMON##
PUSHJ P,PRNAME## ;PUT IN NAME
HLLZ T2,FEXT ;PICK UP EXTENSION
JUMPE T2,BSTRN2 ;NONE--LOOK FOR PPN
MOVEM T2,EXTMON##
LSH T2,-6 ;PUT IN A DOT
TLO T2,('.'B5) ; ..
PUSHJ P,PRNAME## ;TOSS IN EXT
BSTRN2: SKIPN T2,PPN ;A PPN?
JRST BSTRN5 ;NO
MOVEM T2,PPNMON##
PUSHJ P,PRLBK## ;FIRST A BRACKET
HLRZ T1,PPN ;GET PROJECT
PUSHJ P,PRTDI8## ;PRINT IN OCTAL
PUSHJ P,PRCOM## ;ADD A COMMA
HRRZ T1,PPN ;GET PROG NUMBER
PUSHJ P,PRTDI8## ;PRINT PROG
PUSH P,P1 ;SAVE P1
MOVSI P1,-5 ;SETUP AOBJN POINTER TO SFDLST
BSTRN3: SKIPN T2,SFDLST(P1) ;NEXT SFD SPECIFIED?
JRST BSTRN4 ;NO
PUSHJ P,PRCOM## ;PRINT COMMA
PUSHJ P,PRNAME## ;PRINT SFD NAME
AOBJN P1,BSTRN3 ;LOOP FOR ALL
BSTRN4: POP P,P1 ;RESTORE P1
PUSHJ P,PRRBK## ;ADD IN RIGHT SQUARE BRACKET
MOVE T1,[SFDLST,,SFDMON##] ;COPY SFD LIST TO
BLT T1,SFDMON##+4 ;WHERE MONITOR WANTS IT
BSTRN5: MOVEI T3,15
IDPB T3,BOOTBP
MOVEI T3,0
IDPB T3,BOOTBP
POPJ P,
BOOTYO: IDPB T3,BOOTBP ;STORE BYTE IN STRING
POPJ P, ;RETURN
BOOTBP: POINT 7,BOOTXT## ;RELOAD STRING POINTER
SUBTTL MOVE PSECT INTO FINAL POSITION
;ROUTINE TO MOVE A MONITOR PSECT INTO THE FINAL POSITION. PSECTS ARE
;MOVED TO THE END OF PHYSICAL MEMORY (A TRADITION).
;CALL WITH:
; T1/ STARTING VIRTUAL ADDRESS (ASSUMED TO BE ON A PAGE BOUNDARY)
; T2/ ENDING VIRTUAL ADDRESS (LAST ADDRESS USED)
; PUSHJ P,MOVPSE
;CALLS ONCMAP/NZSCGC AS APPROPRIATE TO SET UP MAPPING. THIS ROUTINE
;ASSUMES BOOT HAS LOADED THE MONITOR "IN PLACE", I.E., THERE IS A 1:1
;CORRESPONDANCE BETWEEN VIRTUAL ADDRESSES IN THE .EXE FILE AND THE
;PHYSICAL ADDRESSES CONTAINING THE PSECT TO BE MOVED.
MOVPSE: PUSHJ P,SAVE3## ;SAVE P1-P3
DMOVE P1,T1 ;COPY ARGUMENTS
ADDI P2,1 ;FIRST ADDRESS FOLLOWING PSECT
TRZE P2,PG.BDY ;ROUND UP TO NEXT PAGE BOUNDARY
ADDI P2,PAGSIZ
MOVE P3,P2 ;GET A COPY
SUB P3,P1 ;COMPUTE NUMBER OF WORDS IN AREA
IFN FTXMON,<
TLNN T1,-1 ;IF ADDRESS IS IN SECTION 0/1,
JRST MOVPS1 ; USE ONCMAP TO ALLOCATE SPACE
SE1ENT ;ENTER SECTION 1
PUSHJ P,NZSCGC ;ALLOCATE NON-ZERO SECTION CODE SPACE
JRST MOVPS2 ;CONTINUE
>; END IFN FTXMON
MOVPS1: PUSH P,MONVFF## ;SAVE HONORABLE VARIABLE
MOVEM T1,MONVFF## ;WHERE TO ALLOCATE FROM
MOVE T1,P3 ;COPY NUMBER OF WORDS TO MOVE
MOVSI T2,(<PM.DCD>B2+PM.WRT+PM.PUB+PM.CSH) ;PAGE MAP BITS
PUSHJ P,ONCMAP ;FILL IN MAP SLOTS
POP P,MONVFF## ;RESTORE HONORABLE VARIABLE
MOVPS2: MOVE P1,.CPMAP## ;GET ADDRESS OF SECTION 0/1 MAP
MOVE T3,P2 ;FIRST PAGE (ADDRESS) BEYOND AREA TO MOVE
LSH P2,W2PLSH ;;CONVERT ADDRESS TO PAGE NUMBER
HRLI P2,(<PM.DCD>B2) ;MAKE THAT PAGE ADDRESSABLE
MOVEM P2,.ECKSM/PAGSIZ(P1)
LSH P3,W2PLSH ;GET NUMBER OF PAGES TO MOVE
MOVPS3: SOS .ECKSM/PAGSIZ(P1) ;MAP THE PREVIOUS PAGE
CLRPT .ECKSM ;FLUSH THE MAPPING FOR THE TEMP SLOT
IFE FTXMON,<
SUBI T3,PAGSIZ ;BACK OFF TO START OF PAGE
MOVE T1,T3 ;GET A COPY
HRLI T1,.ECKSM ;VIRTUAL SOURCE ADDRESS
BLT T1,PG.BDY(T3) ;COPY THE PAGE
>; END IFE FTXMON
IFN FTXMON,<
MOVEI T1,PAGSIZ ;NUMBER OF WORDS TO MOVE
XMOVEI T2,.ECKSM ;VIRTUAL SOURCE ADDRESS
SUBI T3,PAGSIZ ;DESTINATION ADDRESS
PUSH P,T3 ;SAVE ACROSS BLT
EXTEND T1,[XBLT] ;COPY THE PAGE
POP P,T3 ;RESTORE DESTINATION ADDRESS
>; END IFN FTXMON
SOJG P3,MOVPS3 ;LOOP FOR ALL PAGES
POPJ P, ;RETURN
SUBTTL ONCE-ONLY HIDDEN SYMBOL TABLE SETUP
SYTBFX:
IFN FTXMON,<
SKIPLE P1,.JBSYM## ;HAVE SYMBOL TABLE?
PUSHJ P,DDTCHK ;AND RUNNING WITH EDDT?
POPJ P, ;DON'T MOVE SYMBOLS
SE1ENT ;ENTER SECTION 1
MOVSI T1,(MS.SYM) ;GET SECTION NUMBER FOR SYMBOLS
PUSHJ P,ALCSMP ;ALLOCATE A SECTION MAP
MOVE T1,.SYSTB+.SYTYP(P1) ;GET FLAGS,,LENGTH OF DEFINED SYMBOL TABLE
AND T1,[SY.LEN] ;KEEP JUST THE LENGTH
ADD T1,.SYSTB+.SYADR(P1) ;COMPUTE LAST ADDRESS IN DEFINED S.T.
MOVE T2,.SYSTB+.SYSTL+.SYTYP(P1) ;GET FLAGS,,LENGTH OF UNDEFINED S.T.
AND T2,[SY.LEN] ;KEEP JUST THE LENGTH
ADD T2,.SYSTB+.SYSTL+.SYADR(P1) ;COMPUTE LAST ADDRESS IN UNDEF S.T.
CAMG T1,T2 ;USE THE GREATER OF THE TWO TABLES
MOVE T1,T2 ; TO COMPUTE NUMBER OF PAGES IN S.T.
SUB T1,.JBSYM## ;SUBTRACT BASE OF TABLE
MOVE P1,T1 ;SAVE LENGTH IN WORDS
ADDI P1,PG.BDY ;ROUND TO A PAGE BOUNDARY
LSH P1,W2PLSH ;REMEMBER NUMBER OF PAGES IN S.T.
SSX T1,MS.SYM ;SECTION NUMBER FOR SYMBOLS
MOVE T2,.JBSYM## ;ADDRESS OF SYMBOL TABLE
SSX T2,MS.SYM ;PLUG IN THE CORRECT SECTION NUMBER
EXCH T1,T2 ;SWAP ARGUMENTS FOR NZSCGT
PUSHJ P,NZSCGT ;ALLOCATE SPACE FOR THE SYMBOL TABLE
;MOVE S.T. PAGE BY PAGE
MOVE T2,.JBSYM## ;START OF SYMBOL TABLE
MOVE T1,P1 ;COPY NUMBER OF PAGES IN SYMBOL TABLE
LSH T1,P2WLSH ;CONVERT TO AN ADDRESS
ADD T2,T1 ;FIRST ADDRESS PAST SYMBOL TABLE
SYTBF1: MOVEI T1,PAGSIZ ;NUMBER OF WORDS TO MOVE
SUBI T2,PAGSIZ ;START AT BEGINNING OF PAGE
PUSH P,T2 ;SAVE SOURCE ADDRESS
MOVE T3,T2 ;SET UP DESTINATION ADDRESS
SSX T3,MS.SYM ;PLUG IN THE SECTION NUMBER
EXTEND T1,[XBLT] ;MOVE ONE PAGE
POP P,T2 ;RESTORE SOURCE ADDRESS
SOJG P1,SYTBF1 ;LOOP FOR ALL PAGES OF SYMBOL SPACE
MOVSI T1,(MS.SYM) ;GET SECTION NUMBER
MOVE T2,.JBSYM## ;GET CURRENT ADDRESS OF SYMBOL TABLE
SSX T2,MS.SYM ;INSERT SECTION NUMBER
HLLM T1,.SYSTB+.SYADR(T2) ;FIXUP ADDRESS OF DEFINED SYMBOL TABLE
HLLM T1,.SYSTB+.SYSTL+.SYADR(T2) ;DITTO FOR UNDEFINED SYMBOL TABLE
HLLM T1,.JBSYM## ;RESET POINTER IN .JBSYM
POPJ P, ;RETURN
>; END IFN FTXMON
;HERE FOR NON-EXTENDED SYMBOL TABLE (KS)
IFE FTXMON,<
SKIPGE P1,.JBSYM## ;HAVE SYMBOL TABLE?
PUSHJ P,DDTCHK ;AND RUNNING WITH EDDT?
POPJ P, ;DON'T MOVE SYMBOLS
HLRE T1,.JBSYM## ;GET LENGTH OF SYMBOL TABLE
MOVMS T1 ;GET REAL LENGTH
HRRZ T2,.JBSYM## ;ADDRESS OF SYMBOL TABLE
ADDI T1,(T2) ;FIRST ADDRESS OUTSIDE OF THE SYMBOL TABLE
SKIPN T2,.JBUSY## ;IN CASE ANY UNDEF'S STILL LYING AROUND
HRRZ T2,.JBSYM## ;NONE, GET SYMBOL TABLE AGAIN
ANDI T2,-1-PG.BDY ;MOVING WHOLE PAGES, ADJUST
SUBI T1,(T2) ;NOW KNOW NUMBER OF WORDS TO MOVE
ADDI T1,PG.BDY ;BUT STILL HAVE TO ROUND IT UP
LSH T1,W2PLSH ;NOW HAVE THE NUMBER OF PAGES
CAILE T1,SYMSIZ## ;ENOUGH SPACE (SYMBK1 IN COMMON.MAC)
MOVEI T1,SYMSIZ## ;NO, REDUCE TO MAXIMUM
LSH T2,W2PLSH ;STARTING PAGE NUMBER
PUSHJ P,MOVSTB ;MOVE THE SYMBOL TABLE
MOVE T2,.JBSYM## ;GET .JBSYM
MOVE T3,.JBUSY## ;GET .JBUSY
TRZ T2,-1-PG.BDY ;KEEP JUST IN-PAGE PORTION
TRO T2,MONORG## ;RELOCATED .JBSYM
TRZ T3,-1-PG.BDY ;KEEP JUST IN-PAGE PORTION
TRO T3,MONORG## ;RELOCATED .JBUSY
MOVEI T1,[ ;SUBROUTINE TO CALL
MOVEM T2,.CPEDV##-.CPCDB##+.EDSYM(P1) ;STORE RELOCATED .JBSYM
MOVEM T3,.CPEDV##-.CPCDB##+.EDUSY(P1) ;STORE RELOCATED .JBUSY
MOVE T4,.CPSYB##+1 ;COUNT OF MAP WORDS TO REPLACE
MOVEM T4,.CPSYB##-.CPCDB##+1(P1) ;STORE
POPJ P,]
PUSHJ P,CPUAPP## ;FILL IN ALL CPU'S EDV'S
PUSHJ P,SETEDV## ;SETUP REMAINDER OF THE EDV
SETZM .JBSYM## ;FORGET ABOUT THESE NOW (OR IF AN ERROR)
SETZM .JBUSY## ;...
POPJ P, ;RETURN
>; END IFE FTXMON
;ROUTINE TO MOVE THE SYMBOL TABLE TO A HIDDEN PLACE.
;CALL:
; T1/ NUMBER OF PAGES TO MOVE
; T2/ FIRST PAGE TO MOVE
; PUSHJ P,MOVSTB
;RETURN:
; CPOPJ ALWAYS
IFE FTXMON,<
MOVSTB: MOVEM T1,.CPSYB##+1 ;NUMBER OF PAGES IN HIDDEN SYMBOL TABLE
PUSH P,P1 ;SAVE THE AC'S
PUSH P,P2 ;...
MOVN P1,T1 ;GET -VE NUMBER OF PAGES TO MOVE
HRLZS P1 ;BUILD AN AOBJN WORD
HRRI P1,-1(T1) ;BACKWARDS INDEX FOR SYMBK1
MOVE P2,T2 ;FIRST PAGE NUMBER
ADDI P2,-1(T1) ; PLUS COUNT-1 GIVES LAST PAGE NUMBER
PUSH P,MONVFF## ;GOING TO FAKE OUT ONCMAP, SAVE REAL ORIGIN
MOVST1: MOVE T1,P2 ;PAGE OF SYMBOLS
MOVE T2,.CPMAP## ;MAP ADDRESS
HRLI T1,(<PM.DCD>B2) ;ALLOW ACCESS
MOVEM T1,.ECKSM/PAGSIZ(T2) ;MAKE ADDRESSABLE
MOVEI T1,.EUPMP ;WHERE WE WANT IT TO BE MAPPED
MOVEM T1,MONVFF## ;SO WE DON'T CHEW UP LOTS OF VIRTUAL SPACE
MOVEI T1,PAGSIZ ;ONLY ALLOCATE ONE PAGE AT A TIME
MOVSI T2,(<PM.DCD>B2+PM.WRT+PM.PUB)
SKIPN [M.CPU##-1]
TDO T2,[PM.CSH]
PUSHJ P,ONCMAR ;ALLOCATE A PAGE FROM SOMEWHERE
HRLI T1,.ECKSM ;OLD SYMBOL TABLE LOCATION (RE-MAPPED)
HRRI T1,.EUPMP ;NEW, SAFER, LOCATION
BLT T1,.EUPMP+PG.BDY ;MOVE PART OF THE SYMBOL TABLE
MOVE T1,.CPMAP## ;GET MAP ADDRESS
MOVE T1,.EUPMP/PAGSIZ(T1) ;GET MAP CONTENTS
MOVEM T1,SYMBK1##(P1) ;STORE SO DDT CAN RE-MAP IT IN
ANDI T1,17777 ;ISOLATE PAGE NUMBER
IDIVI T1,^D36 ;COMPUTE POSITION IN NXMTAB
; MOVE T2,BITTBL##(T2) ;GET BIT FOR PAGE
MOVN T3,T2 ;BITTBL NOT SET UP YET
MOVSI T2,(1B0) ; SO WE MUST DO IT BY HAND
LSH T2,(T3) ;GET THE BIT
IORM T2,NXMTAB##(T1) ;MARK THE PAGE SO IT DOESN'T GET RE-USED
SUBI P1,2 ;EFFECT A "BACKWARDS" AOBJN
SUBI P2,1 ;NEXT PAGE OF THE SYMBOL TABLE
AOBJN P1,MOVST1 ;MOVE THE WHOLE THING
POP P,MONVFF## ;BACK TO NORMAL ALLOCATION NOW
POP P,P2 ;RESTORE AC'S
POP P,P1 ;...
POPJ P, ;RETURN
>; END IFE FTXMON
SUBTTL COMPUTE MONITOR SYMBOL TABLE CHECKSUM, FIXUP PATSIZ
PATFIX: SETZM MSTCKS## ;INITIALIZE MONITOR SYMBOL TABLE CHECKSUM
SKIPGE P1,.JBSYM## ;GET POINTER TO SYMBOL TABLE
JRST PATFI1 ;A NON-EXTENDED SYMBOL TABLE
JUMPE P1,CPOPJ## ;RETURN IF NO SYMBOLS
IFN FTXMON,<
SE1ENT ;ENTER SECTION 1
MOVE T1,.SYCNT(P1) ;GET LENGTH OF VECTOR
CAIGE T1,.SYSTB+<.SYSTL*2> ;IS BLOCK LONG ENOUGH?
STOPCD CPOPJ,DEBUG,SYVCTS, ;++SYMBOL VECTOR TOO SHORT
MOVE P2,.SYSTB+.SYTYP(P1) ;GET FLAGS,,LENGTH OF DEFINED SYMBOL TABLE
AND P2,[SY.LEN] ;KEEP JUST THE LENGTH
MOVE P1,.SYSTB+.SYADR(P1) ;GET ADDRESS OF DEFINED SYMBOL TABLE
JRST PATFI2 ;PROCEED
>; END IFN FTXMON
PATFI1: HLRE P2,P1 ;GET -VE LENGTH OF SYMBOL TABLE
MOVMS P2 ;MAKE IT POSITIVE
HRRZS P1 ;ISOLATE SYMBOL TABLE ADDRESS
PATFI2: SKIPA T1,[RADIX50 4,PAT] ;FIND "PAT" GLOBAL, SKIP AOS OF P1
PATLOP: AOS P1 ;ADVANCE POINTER INTO SYMBOL TABLE
MOVE T3,(P1) ;FETCH A WORD
EXCH T3,MSTCKS## ;SWAP WITH PREVIOUS CHECKSUM
ROT T3,1 ;MUNGE IT AROUND
ADD T3,MSTCKS## ;ADD IN PREVIOUS CHECKSUM
EXCH T3,MSTCKS## ;PUT IT BACK
TRNN P2,1 ;IS THIS THE SYMBOL VALUE WORD?
SOJA P2,PATLOP ;NO, GO DO IT
CAME T1,-1(P1) ;WAS PREVIOUS WORD "PAT"?
JRST PATLO1 ;NO
HRRZ T3,(P1) ;GET VALUE OF "PAT" SYMBOL
HRRZ T4,PATSIZ ;CHECK WITH PATCHED INDICATION
CAMLE T3,T4 ;USE MAX
HRRM T3,PATSIZ
PATLO1: SOJG P2,PATLOP ;GET NEXT SYMBOL,VALUE PAIR
POPJ P, ;DONE
SUBTTL SET UP SYSSIZ, CHECK FOR BREAKPOINTS AND NO EDDT
PATSIZ::MOVEI T1,PAT## ;NO LONGER NEEDED, BUT HABITS ARE HARD TO BREAK
PUSHJ P,DDTCHK ;RUNNING WITH EDDT?
JFCL ;DON'T REALLY CARE
MOVEM T1,SYSSIZ## ;UPDATE FIRST FREE WITH ADDRESS RETURNED IN T1
MOVSI T2,(CAI)
CAIL T1,DDTEND## ;SEE IF EDDT INTACT
TDZA T3,T3 ;YES--CLEAR MASK (PRESERVE DEBUGF BITS)
SKIPA T3,[DF.BPT] ;GET MASK OF ALL CPUS
HLLM T2,NODDT ;LEAVE 401 ALONE
ANDCAM T3,DEBUGF## ;CLEAR CPU MASK IF NO EDDT
PUSHJ P,CPUDDT## ;MAKE SURE CPUS CAN ENTER EDDT
MOVEI T1,CSBORG## ;START OF COMMON CODE AREA
CAIL T1,MONORG## ;DOES IT LIVE ABOVE THE HIGH SEGMENT?
MOVEI T1,MONORG## ;YES--THIS IS FIRST CORE AREA ABOVE LOW SEGMENT
SUBI T1,<M.EVM##*PAGSIZ>+1 ;BACK OFF BY AMOUNT OF RESERVED EVM AND
; ALSO MAKE THIS THE HIGHEST ADDRESS
MOVEM T1,LOWLIM## ;SAVE FOR CURIOUS EYES
CAMG T1,SYSSIZ## ;BETTER BE ENOUGH ROOM TO EVEN ATTEMPT THIS!
STOPCD .,STOP,TME, ;++TOO MANY PAGES RESERVED FOR EVM
POPJ P,
SUBTTL ALLOCATE SECTION MAP
;SUBROUTINE TO ALLOCATE A MAP FOR A NON-ZERO SECTION
;CALL WITH:
; T1 = SECTION NUMBER,,0
;RETURNS WITH A MAP ALLOCATED AND ITS ADDRESS STORED IN THIS CPUS
; EXEC SECTION MAP
IFN FTXMON,<
ALCSMP: HLRZ T2,T1 ;GET DESIRED SECTION
ADDI T2,SECTAB ;OFFSET INTO SECTION MAP TABLE
ADD T2,.CPEPT## ;INDEX INTO THE EPT
SKIPE (T2) ;MAP ALREADY ALLOCATED?
POPJ P, ;YES--DONE
PUSH P,MONVFF## ;SAVE ALLOCATION VARIABLE
PUSH P,T1 ;SAVE DESIRED SECTION NUMBER
MOVEI T1,.EUPMP ;ALLOCATE THIS VIRTUAL ADDRESS
MOVEM T1,MONVFF##
MOVEI T1,PAGSIZ ;LENGTH OF A SECTION MAP
MOVSI T2,(<PM.DCD>B2+PM.WRT+PM.CSH+PM.SWB) ;MAP BITS
PUSHJ P,ONCMAR ;ALLOCATED THE RESERVED PAGE
SETZM .EUPMP ;ZERO OUT THE PAGE
MOVE T1,[.EUPMP,,.EUPMP+1]
BLT T1,.EUPMP+PG.BDY
POP P,T1 ;GET SECTION NUMBER BACK
HLRZS T1 ;PUT IN THE RIGHT HALF
MOVE T2,.CPMAP## ;GET ADDRESS OF S0 MAP
MOVE T3,.EUPMP/PAGSIZ(T2) ;GET PAGE NUMBER WE ALLOCATED
TLZ T3,(PM.KPM) ;TURN OFF "KEEP ME" (ALWAYS SET BY ONCMAR)
IOR T3,.CPKPM## ;LIGHT PM.KPM IF CPU HAS AN MCA25
MOVE T2,.CPEPT## ;GET EPT ADDRESS
ADDI T2,(T1) ;PLUS SECTION NUMBER
MOVEM T3,SECTAB(T2) ;MAKE SECTION ADDRESSABLE
MOVEM T3,.CPMMA##(T1) ;MAKE SECTION MAP ADDRESSABLE IN SECTION 37
CLRPGT ;LET HARDWARE SEE NEW PAGING
POP P,MONVFF## ;RESTORE FIRST FREE FOLLOWING HIGH SEGMENT
POPJ P, ;AND RETURN
>; END IFN FTXMON
SUBTTL ALLOCATE NON-ZERO SECTION MEMORY
;SUBROUTINE TO ALLOCATE NON-ZERO SECTION CORE
;CALL WITH:
; T1 = STARTING VIRTUAL ADDRESS
; T2 = HIGHEST VIRTUAL ADDRESS REQUIRED
;RETURNS WITH:
; T1 = ADDRESS OF CORE ALLOCATED
; T2 = HIGHEST ADDRESS ALLOCATED + 1
;CALL NZSCGT TO ALLOCATE DATA SPACE (WRITABLE), NZSCGC TO ALLOCATE
;CODE SPACE (WRITE LOCKED AND CACHED).
IFN FTXMON,<
NZSCGC: SKIPA T3,[<PM.DCD>B2+PM.WRT+PM.PUB+PM.KPM+PM.CSH] ;GET CODE MAP BITS
NZSCGT: MOVSI T3,(<PM.DCD>B2+PM.WRT+PM.PUB+PM.KPM+PM.SWB) ;GET DATA MAP BITS
CONO PI,PI.OFF ;GUARD AGAINST RACES (KLIPA)
PUSH P,T1
MOVE T1,T2
TRZE T1,PG.BDY ;ROUND DOWN TO PAGE BOUNDARY
ADDI T1,PAGSIZ ;HIGHEST ADDRESS ALLOCATED + 1
PUSH P,T1 ;SAVE THAT
SUBI T1,1 ;HIGHEST ALLOCATED ADDRESS
XOR T1,T2 ;XOR SECTION NUMBERS TOGETHER
TLNE T1,-1 ;DON'T KNOW HOW TO ALLOCATE ACROSS A SECTION BDY
STOPCD .,STOP,CSB, ;++CROSSES SECTION BOUNDARY
SUB T2,-1(P) ;NUMBER OF WORDS REQUIRED
ADDI T2,PG.BDY ;ROUND UP
LSH T2,W2PLSH ;NUMBER OF PAGES
PUSH P,T2 ;SAVE NUMBER OF PAGES REQUIRED
PUSH P,P1 ;IT IS A PRESERVED AC AFTER ALL
HRRZ P1,-3(P) ;ADDRESS WITHIN THE SECTION
ADDI P1,PG.BDY ;ROUND UP
LSH P1,W2PLSH ;PAGE NUMBER WITHIN THE SECTION
LDB T1,[POINT 5,-3(P),17] ;SECTION NUMBER TO ALLOCATE FROM
MOVE T2,.CPEPT## ;ADDRESS OF THIS CPU'S EXEC PROCESS TABLE
ADD T2,T1 ;ADDRESS OF SECTION POINTER
SKIPN T2,SECTAB(T2) ;ENTRY FOR THIS SECTION'S MAP
STOPCD .,STOP,NSA, ;++NO SECTION ALLOCATED
MOVE T1,.CPMAP## ;ADDRESS OF THE MAP
MOVEM T2,.EUPMP/PAGSIZ(T1) ;.EUPMP MAPS THE MAP
CLRPT .EUPMP ;MAKE NEW MAPPING VISIBLE
ADD P1,-1(P) ;GET FIRST PAGE FOLLOWING OUR RANGE
SUBI P1,1 ;START AT LAST PAGE IN OUR RANGE SO PAGES ARE
; PHYSICALLY CONTIGUOUS WITHIN OUR RANGE
PUSH P,T3 ;SAVE PAGE MAP BITS REQUIRED
NZSCG1: PUSHJ P,GTPHPG ;GET A PHYSICAL PAGE
TDO T1,(P) ;SET PAGE BITS
MOVEM T1,.EUPMP(P1) ;STORE IT IN MAP FOR THIS SECTION
SOSLE -2(P) ;ALLOCATED ALL PAGES REQUESTED?
SOJA P1,NZSCG1 ;NO, LOOP FOR MORE
POP P,(P) ;POP OFF JUNK
POP P,P1 ;RESTORE HONORABLE AC
POP P,(P) ;POP OFF JUNK
POP P,T2 ;RESTORE ACS (CAN'T USE TTPOPJ
POP P,T1 ; AS IT'S NOT MAPPED ALWAYS)
CONO PI,PI.ON ;NOW SAFE TO ALLOW INTERRUPTS (KLIPA)
POPJ P, ;AND RETURN
>; END IFN FTXMON
SUBTTL SELECT PHYSICAL AND VIRTUAL ADDRESS SPACE
;SUBROUTINE TO SELECT PHYSICAL AND VIRTUAL ADDRESS FOR SPACE IN HIGH SEGMENT
;CALL: MOVEI T1,NUMBER-OF-WORDS-NEEDED
; MOVEI T2,PAGE-MAP-ACCESS-BITS-DESIRED
ONCMAR: TDZA T4,T4 ;INDICATE NO CHECK ON EXCEEDING HLCSAD
ONCMAP: SETO T4, ;INDICATE SHOULD CHECK ON EXCEEDING HLCSAD
IFN FTKL10,<
TLO T2,(PM.KPM) ;LITE "KEEP ME"
>; END IFN FTKL10
PUSH P,P1 ;SAVE P AC'S
PUSH P,P2 ;...
PUSH P,P3 ;...
MOVE T3,BOOTCP## ;BOOT CPU NUMBER
IMULI T3,.CPLEN## ;OFFSET INTO BOOT CPU'S CDB
PUSH P,.C0MAP##(T3) ;ADDRESS OF THE BOOT CPU'S MAP
MOVEI P1,PG.BDY(T1) ;ROUND UP AMOUNT OF WORDS REQUESTED
TRZ P1,PG.BDY ; TO FULL PAGES
MOVE P2,P1 ;COPY NUMBER OF WORDS
ADDB P1,MONVFF## ;UPDATE FIRST FREE
LSHC P1,W2PLSH ;CONVERT P1 TO VIRTUAL PAGE NUMBER, P2 TO COUNT
SOS P1 ;P1 = HIGHEST VIRTUAL PAGE TO BE ALLOCATED NOW
JUMPE T4,ONCMA1 ;NO CHECK IF CALLER IS ALLOCATING BEYOND HLCSAD
CAIL P1,HLCSAD##/PAGSIZ ;GONE INTO THE RESERVED AREA?
STOPCD .,STOP,OVA, ;++ OUT OF VIRTUAL ADDRESS SPACE
ONCMA1: MOVE P3,T2 ;COPY PAGE MAP BITS
ONCMA2: PUSHJ P,GTPHPG ;GET A PHYSICAL PAGE
TDO T1,P3 ;INCLUDE PAGE MAP BITS
ADD P1,(P) ;OFFSET INTO BOOT CPU'S MAP
MOVEM T1,(P1) ;STORE PAGE MAP ENTRY
SUB P1,(P) ;BACK TO VIRTUAL PAGE NUMBER
SOSLE P2 ;ANY MORE PAGES TO ALLOCATE?
SOJA P1,ONCMA2 ;YES, LOOP FOR THEM
CLRPGT ;LET HARDWARE SEE THE CHANGES
POP P,(P) ;POP OFF JUNK
POP P,P3 ;...
POP P,P2 ;...
POP P,P1 ;...
POPJ P,
SUBTTL ALLOCATE PHYSICAL PAGE
;SUBROUTINE TO ALLOCATE ONE PHYSICAL PAGE. USED BY ONCMAP AND NZSCGT.
;CALL:
; PUSHJ P,GTPHPG
;RETURN:
; T1/ PHYSICAL PAGE NUMBER OBTAINED
GTPHPG: MOVNI T1,PAGSIZ ;AMOUNT TO BACK OFF SYSORG
ADDB T1,SYSORG## ;GET NEXT FREE PHYSICAL ADDRESS
LSH T1,W2PLSH ;CONVERT TO A PAGE NUMBER
MOVE T2,T1 ;COPY IT HERE
IDIVI T2,^D36 ;COMPUTE OFFSET AND BIT IN NXMTAB
MOVNS T3 ;SELECT THE BIT
MOVSI T4,400000
LSH T4,(T3)
TDNE T4,NXMTAB##(T2) ;DOES THIS PAGE EXIST?
JRST GTPHPG ;NO, TRY NEXT LOWER ONE
POPJ P, ;RETURN
SUBTTL MARK OFF IOWD SPACE
;ROUTINE TO MARK OFF SPACE USED FOR IOWD 4-WORD BLOCKS.
;CALL:
; T1/ NUMBER OF BLOCKS
; T2/ STARTING ADDRESS OF BLOCK
; PUSHJ P,MRKIOW
IFN FTKL10,<
MRKIOW: SUB T2,LOWLOC## ;SUBTRACT BASE OF AREA
JUMPL T2,CPOPJ## ;IN CASE THE BLOCK APPEARS BEFORE THE TABLE
PUSHJ P,SAVE4## ;FREE UP ARGUMENT ACS FOR SETOS
LSH T2,-2 ;CONVERT TO BIT NUMBER
IDIVI T2,^D36 ;GET WORD AND BIT IN TABLE
MOVE P4,T2 ;COPY OFFSET TO BIT
ADD P4,LOWPTR## ;ADD IN BASE OF AOBJN POINTER TO TABLE
MOVNS T3 ;GET -VE BIT NUMBER TO START WITH
HRLI P4,^D36(T3) ;BIT POSITION,,ADDRESS
MOVE P3,T1 ;GET NUMBER OF BLOCKS TO RETURN FOR SETOS
PUSHJ P,SETOS## ;MARK OFF THE BITS
POPJ P, ;BLOCK ALREADY MARKED OFF (IE, NOT IN LTINIT)
MOVNS P3 ;GET -VE NUMBER OF BLOCKS WE RETURNED
ADDM P3,NOIOWD## ;DECREMENT NUMBER OF AVAILABLE BLOCKS
POPJ P, ;RETURN
>; END IFN FTKL10
SUBTTL TYPE-IN/TYPE-OUT ROUTINES
CONOUT::PUSHJ P,ICONM
CRLFOP::PUSHJ P,CRLF##
PJRST OPOUT
ICONM:: PUSHJ P,OTSET ;INITIALIZE LINE BUFFER
JRST CONMES## ;OUTPUT MESSAGE
OTSET:: PUSH P,T1 ;SAVE A TEMP
MOVEI T1,ONCTSZ ;SIZE OF BUFFER
MOVEM T1,ONCCNT ;SO CANT OVERFLOW
MOVE T1,LINEP ;INITIAL OUTPUT POINTER
MOVEM T1,ONCTOP
MOVEI T1,ONCTIV ;ADDRESS FOR READ ROUTINES TO USE
MOVEM T1,.CPTIV## ; ..
MOVEI T1,ONCTYO ;ADDRESS FOR TYPEOUT ROUTINES TO GO TO
MOVEM T1,.CPTOA## ; ..
SETZM ONCTCH ;CAN NO LONGER CONTINUE THE COMMAND
JRST TPOPJ## ;RESTORE A TEMP AND RETURN
;ASK A QUESTION WITH A DEFAULT ANSWER
;CALL WITH:
; MOVEI T1,[ASCIZ /QUESTION/]
; MOVEI T2,[ASCIZ /ANSWER/]
; PUSHJ P,ASKDEF
; RETURN HERE ON CRLF
; ELSE RETURN HERE
ASKDEF: PUSH P,OPRCNT ;SAVE OLD OPRCNT
EXCH T3,OPRCNT ;FORCE CALLER'S
TLNE T3,-1 ;UNLESS OLD WAS VERY LARGE - IN WHICH CASE
MOVEM T3,OPRCNT ;OPR TYPED SOMETHING, DON'T INTERFERE
PUSH P,T2 ;SAVE T2
PUSHJ P,ICONM ;OUTPUT QUESTION
PUSHJ P,OPOUT ;PUSH OUTPUT OUT
POP P,T1 ;RESTORE ANSWER
MOVE T2,DEFSP ;GET BYTE POINTER
HLL T1,T2 ; ..
ASKDF1: ILDB T3,T1 ;COPY STRING
IDPB T3,T2 ; ..
JUMPN T3,ASKDF1 ; ..
MOVEI T3,15 ;ADD ON A CR
IDPB T3,T2 ; ..
PUSHJ P,GETLND
CAIA ;PRESERVE SKIPNESS
AOS -1(P) ;...
POP P,OPRCNT ;RESTORE OLD TIMEOUT
POPJ P,
;ROUTINE TO MAKE SURE WE GIVE THE OPR TIME TO ANSWER, BECAUSE WE
;THINK WE MAY HAVE TIMED HIM OUT UNFAIRLY, AND THE NEXT QUESTION IS IMPORTANT
RSTDEF: SKIPL DEFALW ;HAS OPR BEEN TIMED OUT?
POPJ P, ;NO, NOTHING TO DO
PUSH P,T1 ;YES, SAVE T1
MOVEI T1,^D60 ;MAKE TIMEOUT AT LEAST A MINUTE AGAIN
CAMLE T1,OPRCNT ;SO OPR CAN INTERVENE
MOVEM T1,OPRCNT ; (NEW IS LONGER, USE IT)
SETZM DEFALW ;AND FORGET HE ISN'T THERE
JRST TPOPJ## ;RETURN
DEFSP: POINT 7,DEFBUF
DEFLAG: -1
DEFPTR: POINT 7,DEFBUF
DEFBUF: BLOCK 24 ;ENOUGH FOR 99 CHAR DEFAULT
OPRCNT: EXP ^D60 ;SECONDS TILL OPR ASSUMED NOT PRESENT
DEFALW: 0 ;-1 TO TAKE DEFAULT ALWAYS
;SUBROUTINE TO PUT A DECIMAL STRING INTO THE DEFAULT BUFFER
DECDEF: MOVEI T2,"0" ;ALWAYS FORCE 2 DIGITS
CAIGE T1,^D10 ;WILL WE GET MORE THAN ONE ANYWAY?
IDPB T2,DEFPTR ;NO--ADD IN LEADING DIGIT
PUSHJ P,DCDFLP ;STUFF THE TEXT
SETZ T2, ;GET A ZERO
MOVE T1,DEFPTR ;AND A COPY OF THE POINTER
IDPB T2,T1 ;ENSURE PROPER ASCIZ TERMINATION
POPJ P, ;RETURN TO CALLER
DCDFLP: IDIVI T1,12
HRLM T2,(P)
SKIPE T1
PUSHJ P,DCDFLP
HLRZ T1,(P)
ADDI T1,"0"
IDPB T1,DEFPTR
POPJ P,
;TYPEOUT ROUTINE TO STUFF INTO THE DEFAULT BUFFER
DEFTYO: IDPB T3,DEFPTR ;STUFF THE CHARACTER
POPJ P, ;ASSUME THE CALLER WILL MAKE IT ASCIZ
;SUBROUTINE TO PUT AN ASCIZ STRING INTO THE DEFAULT BUFFER
DEFTXT: HRLI T1,(POINT 7,) ;MAKE A BYTE POINTER
DEFTX1: ILDB T2,T1 ;FETCH A CHAR
JUMPE T2,DEFTX2 ;RETURN TO CALLER
IDPB T2,DEFPTR ;STORE THIS ONE
JRST DEFTX1 ;ONWARDS
DEFTX2: MOVE T1,DEFPTR ;GET A COPY OF THE POINTER
IDPB T2,T1 ;MAKE SURE IT'S ASCIZ
POPJ P, ;RETURN TO CALLER
SUBTTL ROUTINE TO WARN ABOUT OFFLINE MEMORY
MEMBAD: PUSHJ P,RSTDEF ;RESET DEFAULT TIMEOUT, ETC.
MOVEI T1,[ASCIZ /%Memory from /]
PUSHJ P,ICONM ;START MESSAGE
MOVE T1,U ;GET LOWER ADDRESS
PUSHJ P,PRT22A## ;PRINT AS 22-BIT OCTAL NUMBER
MOVEI T1,[ASCIZ / to /]
PUSHJ P,CONMES## ;SOME NOISE
MOVE T1,P3 ;GET FIRST ADDRESS PAST HOLE
SUBI T1,1 ;BACK DOWN TO END OF HOLE
PUSHJ P,PRT22A## ;PRINT AS 22-BIT OCTAL NUMBER
MOVEI T1,[ASCIZ / is offline
/]
PUSHJ P,CONMES## ;END MESSAGE
PUSHJ P,OPOUT ;PUSH OUTPUT OUT
MOVEI T1,[ASCIZ /Set memory/]
MOVE T2,['OFFLIN'] ;DEFAULT
MOVE T3,[-3,,MEMOPT] ;TABLE OF OPTIONS
PUSHJ P,PRSKEY ;PROMPT AND FETCH ANSWER
JFCL ;SHOULDN'T HAPPEN
SOJL T1,CPOPJ1## ;RETURN IF "DOWN"
SOJG T1,CPOPJ ;"ONLINE" REQUESTED
JRST CPOPJ2## ;ELSE "OFFLINE" WANTED
MEMOPT: SIXBIT /DOWN/
SIXBIT /OFFLIN/
SIXBIT /ONLINE/
SUBTTL READ A LINE FROM OPERATOR CONSOLE
;ROUTINE TO READ A LINE FROM OPERATORS CONSOLE
;CALL: PUSHJ P,GETLIN
; <JUST A CR TYPED IN>
; <NORMAL RETURN (NOT A BLANK LINE)>
GETLND: MOVE T1,DEFSP ;GET INITIAL STRING POINTER
MOVEM T1,DEFPTR ;SETUP FOR DEFAULTING
GETLIN::PUSHJ P,SAVE1## ;SAVE P1
SETZM SAWCMT ;ZERO THE COMMENT FLAG
MOVE T1,OPRCNT ;ALLOW 60 SEC.
IMUL T1,TICSEC## ; ..
SKIPGE DEFALW ;IF THE OPR HAS BEEN TIMED OUT ALREADY,
MOVEI T1,1 ; HURRY ALONG
MOVEM T1,DEFLAG ;STORE TICKS TILL TIMOUT AS A FLAG
GETLI0: MOVE T1,LINEP
MOVEM T1,ONCTIP ;INITIAL STORAGE POINTER
MOVEI T3," " ;PRIME COMMAND ROUTINES WITH A SPACE
MOVEM T3,ONCTCH ; ..
MOVEI P1,0 ;FLAG NO ALTMODE SEEN, ZERO CHARACTER COUNT (RH
; OF P1), CLEAR DELETE FLAG (LH OF P1)
GET1: PUSHJ P,XTYI ;WAIT FOR A CHARACTER
SKIPGE DEFLAG ;NEED A DEFAULT?
JRST [ILDB T3,DEFPTR ;YES--GET BYTE
SKIPN T3 ;IF HIT END OF STRING,
MOVEI T3,15 ;MAKE IT END OF COMMAND
JRST .+1] ;REJOIN
SKIPL DEFLAG ;NEED A DEFAULT?
MOVE T3,FROMFE ;GET CHAR FROM WHERE IT WAS SAVED
ANDI T3,177 ;STRIP PARITY
CAIE T3,"H"-100 ;BACKSPACE?
CAIN T3,177 ;RUBOUT?
JRST DELETE ;YES
TLZE P1,1
PUSHJ P,BKSLSH ;TERMINAL BACKSLASH IF WE HAD BEEN DELETING
CAIN T3,"R"-100 ;CONTROL-R?
JRST RETYPE ;YES
CAIN T3,"U"-100 ;CONTROL-U?
JRST CNTRLU ;YES
CAIN T3,33 ;ALTMODE/ESCAPE?
JRST GETLN1 ;YES
CAIE T3,175 ;OTHER ALTS?
CAIN T3,176 ; ..
JRST GETLN1 ;YES
GET2: SKIPN .UONCE## ;USER MODE?
PUSHJ P,XTYO ;ECHO
CAIL T3,140 ;LOWER CASE?
TRZ T3,40 ;YES. MAKE UPPER
CAIE T3,";" ;WAS IT ONE KIND OF COMMENT INDICATOR?
CAIN T3,"!" ;OR ANOTHER?
SETOM SAWCMT ;YES - LIGHT FLAG
CAIN T3," " ;WAS IT A SPACE?
SETOM SAWCMT ;THAT'S A COMMENT INDICATOR TOO
IDPB T3,T1 ;STORE IN INPUT BUFFER
CAIE T3,15 ;CAR RET?
AOJA P1,GET1 ;NO. LOOP TILL BREAK
MOVEI T3,12 ;YES. ADD LF
SKIPN .UONCE## ;ALREADY HAD LF IF USER MODE
PUSHJ P,XTYO ;OUTPUT LF
MOVEI T3,0 ;TERMINATE INPUT STRING IN BUFFER
IDPB T3,T1 ; ..
SKIPE P1 ;NON-NULL LINE?
AOS (P) ;TAKE SKIP RETURN
SKIPE .UONCE## ;USER MODE?
CLRBFI ;CLEAN UP
MOVEM P1,ALTMFL ;SAVE ALTMODE TYPED FLAG
POPJ P, ;AND RETURN
;ROUTINE TO SEE IF ALTMODE WAS TYPED IN RESPONSE TO A QUESTION
ALTM:: SKIPGE ALTMFL ;ALTMODE TYPED?
JRST STRTUP ;GO BACK TO THE BEGINING
POPJ P, ;JUST RETURN
DELETE: TRNN P1,-1 ;AT BEGINNING OF LINE ?
JRST DELET1 ;YES
TLON P1,1 ;SET DELETE FLAG
PUSHJ P,BKSLSH ;TYPE BACKSLASH IF JUST STARTING TO DELETE
LDB T3,T1 ;GET PREVIOUS CHARACTER
PUSHJ P,XTYO ;ECHO IT AS WE DELETE IT
ADD T1,[XWD 070000,0] ;BACK UP BYTE POINTER
TLNE T1,400000 ;FINISHED THIS WORD YET ?
ADD T1,[XWD 347777,-1] ;YES, BACK UP ADDRESS
SOJA P1,GET1
DELET1: TLZE P1,1
PUSHJ P,BKSLSH ;TERMINAL BACKSLASH IF DELETED ANY CHARS
DELET2: MOVEI T3,15
PUSHJ P,XTYO
MOVEI T3,12
PUSHJ P,XTYO
HRLOI T1,777 ;DO NOT ALLOW A DEFAULT
MOVEM T1,DEFLAG ;STORE FLAG
JRST GETLI0
CNTRLU: MOVEI T3,"^" ;TYPE UP ARROW
PUSHJ P,XTYO
MOVEI T3,"U" ;TYPE U
PUSHJ P,XTYO
JRST DELET2 ;FINISH UP
BKSLSH: PUSH P,T3
MOVEI T3,134 ;TYPE BACKSLASH
PUSHJ P,XTYO
POP P,T3
POPJ P,
GETLN1: MOVEI T3,"$" ;OUTPUT DOLLAR SIGN IF ALT-MODE TYPED
SKIPN .UONCE## ;ALREADY ECHOED IF USER-MODE
PUSHJ P,XTYO
HRROS P1 ;MECHANISM USED TO BY-PASS PART OF DIALOGUE
MOVEI T3,15 ; WHEN ALTMODE IS TYPED (ALTMFL NEGATIVE ON
JRST GET2 ; RETURN FROM GETLIN).
RETYPE: MOVEI T3,15 ;CARRIAGE RETURN
PUSHJ P,XTYO
MOVEI T3,12 ;LINE FEED
PUSHJ P,XTYO
PUSH P,T1 ;SAVE THE BYTE POINTER
SETZ T3, ;GET A ZERO
IDPB T3,T1 ;MAKE ASCIZ
MOVE T1,LINEP ;GET VIRGIN BYTE POINTER TO INPUT LINE
RETYP1: ILDB T3,T1 ;GET A CHARACTER
JUMPE T3,RETYP2 ;DONE AT NULL
PUSHJ P,XTYO ;TYPE IT
JRST RETYP1 ;LOOP
RETYP2: POP P,T1 ;RESTORE BYTE POINTER
JRST GET1 ;GET NEXT CHARACTER
SUBTTL TYPE A LINE ON OPERATOR CONSOLE
;ROUTINE TO TYPE A LINE ON OPERATOR CONSOLE
;ECHO CHECK STOPS LINE AND RETURNS
;CALL: ONCTOP SET TO END OF MESSAGE
;CALL OPOUTX FOR MESSAGE CONTINUATIONS TO BE SUPPRESSED IF
; THE PREVIOUS PART OF THE MESSAGE WAS ^O'D
OPOUTX::SKIPE CNTRLO ;^O IN EFFECT ?
PJRST OTSET ;YES, JUST CLEAR BUFFER AND GO AWAY
OPOUT:: SETZM CNTRLO ;CLEAR ^O FLAG
SKIPE .UONCE## ;IF USER MODE,
SKPINL ;MAKE SURE TO DEFEAT ^O
JFCL ;IT MIGHT EVEN SKIP
MOVEI T3,0 ;MAKE SURE STRING ENDS
IDPB T3,ONCTOP ;WITH A NULL
MOVE T1,LINEP ;AND RESTART AT BEGINNING
MOVEM T1,ONCTOP ; ..
OPOUT1: SKIPE .UONCE## ;USER MODE?
JRST OPOUT2 ;YES, USER-MODE HAS THE REAL ^O, SKIP THIS CRUFT
IFN FTKL10,<
PUSHJ P,SPCGTI## ;CHECK FOR INPUT, SKIP WITH CHAR IN T3
JRST OPOUT2 ;NO INPUT
JRST OPOUT3 ;YES
>; END IFN FTKL10
IFN FTKS10,<
SKIPN T3,CTYIWD ;SKIP IF CHAR IS THERE
JRST OPOUT2 ;NONE THERE
SETZM CTYIWD ;CLEAR CTYIWD
JRST OPOUT3 ;GO DO CTRL-O
>; END IFN FTKS10
OPOUT2: ILDB T3,ONCTOP ;GET CHAR TO TYPE
JUMPE T3,OTSET ;QUIT ON NULL
PUSHJ P,XTYO ;TYPE CHAR
MOVEI T3,0 ;GET A ZERO
DPB T3,ONCTOP ;CLEAR BUFFER AS WE GO
JRST OPOUT1 ;LOOP
;HERE WHEN KEY STRUCK DURING TYPEOUT
OPOUT3: SETOM CNTRLO ;SET ^O FLAG
MOVEI T3,"^"
PUSHJ P,XTYO
MOVEI T3,"O"
PUSHJ P,XTYO
MOVEI T3,15
PUSHJ P,XTYO ;TYPE OUT CRLF
MOVEI T3,12
PUSHJ P,XTYO
JRST OTSET ;RESET OUTPUT BUFFER, RETURN FROM OPOUT
CNTRLO: 0 ;SUPPRESS TYPE-OUT WHEN -1
SUBTTL LOWEST LEVEL CONSOLE OUTPUT ROUTINE
XTYO:: CAIL T3," " ;CONTROL CHARACTER?
JRST XTYOCH ;NO
CAIN T3,15 ;CARRIAGE RETURN?
SETZM ONCCOL ;YES, BACK AT BEGINNING OF LINE
CAIE T3,11 ;TAB?
JRST XTYOCN ;NO, DON'T COUNT WIDTH OF CONTROL CHARACTERS
PUSH P,T3 ;SAVE ORIGINAL CHARACTER
MOVE T3,ONCCOL ;GET COLUMN
ADDI T3,^D8 ;GET TO NEXT TAB STOP
TRZ T3,7 ;...
SUB T3,ONCCOL ;FIND NUMBER OF SPACES NEEDED
PUSH P,T3 ;SAVE COUNT
MOVEI T3," " ;GET A SPACE
PUSHJ P,XTYOCH ;OUTPUT IT
SOSLE (P) ;NEED ANY MORE?
JRST .-2 ;YES, DO ANOTHER
ADJSP P,-1 ;TOSS THE COUNT
POP P,T3 ;RESTORE ORIGINAL TAB
POPJ P, ;RETURN
XTYOCH: AOS ONCCOL ;INCREMENT COLUMN COUNT
XTYOCN: SKIPE .UONCE## ;USER MODE?
JRST [OUTCHR T3 ;PRINT CHARACTER
POPJ P,] ;AND RETURN
PUSHJ P,PEVEN8## ;GET GOOD PARITY FOR CHAR
IFN FTKL10,<
PUSHJ P,SPCTYO## ;TYPE OUT
PUSHJ P,OPRFIL## ;DO FILLERS
PUSHJ P,APRCHK ;UPDATE TIME
PUSHJ P,SPCWTO## ;WAIT FOR OUTPUT DONE
JRST .-2 ;NOT DONE, WAIT SOME MORE
>; END IFN FTKL10
IFN FTKS10,<
PUSHJ P,APRCHK ;UPDATE TIME
SKIPE CTYOWD ;CAN WE TYPE YET?
JRST .-2 ;NO, WAIT
TRO T3,CTYOVL ;SET VALID FLAG
MOVEM T3,CTYOWD ;PUT IT IN 8080'S WORD
WRAPR SP.SSF+SP.IFE ;INTERRUPT THE 8080
PUSHJ P,APRCHK ;UPDATE TIME
SKIPE CTYOWD ;CHAR TAKEN YET?
JRST .-2 ;NO, WAIT
>; END IFN FTKS10
ANDI T3,177 ;ONLY CHAR FOR COMPARES IN GETLIN
POPJ P, ;RETURN
ONCCOL: 0 ;COLUMN NUMBER FOR TAB SIMULATION
SUBTTL LOWEST LEVEL CONSOLE INPUT ROUTINE
;WAIT TIL INPUT DONE ON BEFORE RETURNING WITH NEXT CHAR.
XTYI: PUSH P,T1 ;SAVE AN AC
SKIPN .UONCE## ;USER MODE?
JRST XTYI1 ;NO
INCHWL T3 ;WAIT ON LINE, READ A CHARACTER
JRST XTYI2 ;GO FINISH UP
XTYI1: PUSHJ P,APRCHK
SKIPGE DEFLAG
JRST XTYI3
IFN FTKL10,<
PUSHJ P,SPCGTI## ;SKIP IF CHAR PRESENT, WITH IT IN T3
JRST XTYI1
> ;END IFN FTKL10
IFN FTKS10,<
SKIPN T3,CTYIWD ;SKIP IF CHAR PRESENT, WITH IT IN T3
JRST XTYI1
SETZM CTYIWD ;CLEAR FOR NEXT TIME
> ;END IFN FTKS10
XTYI2: MOVEM T3,FROMFE ;SAVE CHARACTER FOR USE LATER
HRLOI T1,777 ;RESET THE TIMER
MOVEM T1,DEFLAG ; SO WE DON'T START UP
MOVEM T1,OPRCNT
SETZM DEFALW
JRST TPOPJ## ;RETURN AND RESTORE T1
XTYI3: SETOM DEFALW
JRST TPOPJ##
ONCKLT::BLOCK 1 ;PLACE TO KEEP BITS FOR KL10 INTERVAL TIMER
FROMFE: BLOCK 1 ;PLACE TO KEEP CHAR AFTER XTYO GETS IT
SUBTTL CHECK FOR CLOCK TICK
;CHECK APR FOR CLOCK FLAG SO TIME USER TYPES IN WILL BE ACCURATE
APRCHK::
IFN FTKL10,<SKIPN .CPTIM##> ;APR CLOCK TICKED?
IFN FTKS10,<CONSO APR,SP.ITI> ;APR CLOCK TICKED?
POPJ P, ;NO
IFN FTKL10,<SETZM .CPTIM##> ;YES, WE'VE NOTICED, CLEAR THE FLAG
IFN FTKS10,<WRAPR SP.CSF!SP.ITI> ;SET UP FOR ANOTHER CLOCK TICK
IFN FTMP,<
PUSH P,T1
MOVEI T1,.C0CDB## ;INCREMENT .CPOK FOR ALL CPUS
APRCH1: AOS .CPOK##-.CPCDB##(T1)
HLRZ T1,.CPCDB##-.CPCDB##(T1) ;STEP TO NEXT CPU
JUMPN T1,APRCH1
POP P,T1
>; END IFN FTMP
AOS TIME## ;INCREMENT TIME
IFN FTKS10,<AOS APRTIM> ;KEEP THIS SOMEWHAT CORRECT ALSO
SOS DEFLAG ;SEE IF TIME FOR DEFAULT
IFN FTSCA,<
PUSHJ P,SAVT## ;SAD BUT NEEDED
PUSHJ P,SC.TIC## ;DO ONCE/TICK SCA MEMORY ALLOCATION
PUSHJ P,PPDTIC## ;DITTO FOR THE KLIPA
>; END IFN FTSCA
POPJ P,
APRTIM::BLOCK 1 ;CLOCK TICKS SINCE APR CLOCK TURNED ON
; USEFUL FOR TIMING DURING INITIALIZATION
SUBTTL ONCE TTY INPUT VECTOR
;ONCTIV ONCE TTY INPUT VECTOR.
ONCTIV::PUSHJ P,ONCTYI ;(0 = CTIGNC) GET NEXT CHAR
MOVE T3,ONCTCH ;(1 = CTIGLC) GET LAST CHAR
MOVEM T3,ONCTCH ;(2 = CTISLC) SET LAST CHAR
MOVE T1,ONCTIP ;(3 = CTIGBP) GET BYTE POINTER
MOVEM T1,ONCTIP ;(4 = CTISBP) SET BYTE POINTER
;HERE TO READ THE NEXT CHAR FOR COMCON.
ONCTYI: ILDB T3,ONCTIP ;GET INPUT CHARACTER
MOVEM T3,ONCTCH ;STORE FOR RE-READS
POPJ P, ;AND RETURN TO CALLING ROUTINE
ONCTYO::SOSLE ONCCNT ;COUNT CHARACTERS
IDPB T3,ONCTOP ;PUT IN BUFFER
POPJ P, ;AND RETURN
SUBTTL SWAPPER INITIALIZATION
;ROUTINE TO RE-INITIALIZE THE SWAPPING AVAILABILITY TABLE. CALLED AT
; SYSTEM INITIALIZATION TIME.
SWPINI: MOVEI T1,SWPDDB## ;SWAPPER DDB
HLRZ T2,DSKDDB##+DEVSER ;GET DDB POINTED TO BY PROTOTYPE
HRLM T1,DSKDDB##+DEVSER ;LINK UP SWAPPER DDB
HRLM T2,SWPDDB##+DEVSER ;SPLICE SWAPPER DDB INTO CHAIN
MOVEI T1,ASSCON ;FLAG SWAPPER DDB AS ASSIGNED BY CONSOLE
IORM T1,SWPDDB##+DEVMOD ;SINCE IT APPEARS IN SYSTEM DDB LIST (BEFORE PROTOTYPE
; ELSE USERS COULD INIT IT.
IFN FTMP,<
MOVE T1,DSKDDB##+DEVCPU ;INITIALIZE INTERLOCK POINTER
HRRM T1,SWPDDB##+DEVCPU
>; END IFN FTMP
SETZB T1,R ;MAKE SURE ASSIGNED TO JOB 0
DPB T1,PJOBN##
HLRZ U,SWPUNI## ;GET ADDR OF FIRST UNIT FOR SWAPPING
JUMPE U,CPOPJ## ;EXIT IF NOT A UNIT DATA BLOCK
HRLM U,NXTSUN## ;INITIALIZE NEXT SWAPPING UNIT
SETZM SQREQ## ;CLEAR SWAPPPING LOCS
SETZM VIRTAL## ;START TOTAL VIRTUAL CORE FOR SYSTEM AT 0
IFN FTXMON,<
LDB R,UNYSNS## ;SECTION NUMBER FOR SWAPPING SATS
MOVSS R ;TO THE LEFT HALF
>; END IFN FTXMON
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
SE1ENT ;MUST BE IN SECTION 1
SWPIN1: SETZM UNIFKS(U) ;CLEAR FREE J FOR SWAP
SKIPL T1,UNIPTR(U) ;SKIP IF SWAPPING SPACE ON THIS UNIT
JRST SWPIN2 ;NONE
HLRE T2,T1 ;T2=-LENGTH OF SWAPPING SAT
HRLS T1 ;T1=ADDR IN BOTH HALVES
SUBB T1,T2 ;T1=BLT PTR
MOVSS T1
IFE FTXMON,<
BLT T1,-1(T2) ;COPY INITIAL SWAPPING SAT
>; END IFE FTXMON
IFN FTXMON,<
HLRZ T2,T1 ;STARTING ADDRESS, SECTION RELATIVE
HRRZ T3,T1 ;WHERE TO BLT TO, SECTION RELATIVE
ADD T2,R ;ADD IN SECTION NUMBER
ADD T3,R ; DITTO
MOVSI T1,400000 ;MAKE LOGICAL BLOCK 0 BE UNAVAILABLE
IORM T1,(T2)
HLRE T1,UNIPTR(U) ;NEGATIVE LENGTH
MOVMS T1 ;LENGTH
EXTEND T1,[XBLT] ;MOVE IT
>; END IFN FTXMON
MOVE T1,UNIPTR(U) ;PTR TO SWAPPING SAT
IFE FTXMON,<
MOVSI T2,400000 ;MAKE LOGICAL BLOCK 0 BE UNAVAILABLE
IORM T2,(T1) ; SINCE SLOT=0 MEANS PAGE NOT IN USE AT ALL
>; END IFE FTXMON
PUSHJ P,SATCN## ;COUNT 0 BITS=FREE K
ADDM T2,VIRTAL## ;COUNT TOTAL IN SYSTEM
MOVEM T2,UNIFKS(U) ;AND GET FOR UNIT
SWPIN2: HLRZ U,UNISWP(U) ;NEXT UNIT IN SWAP LIST
JUMPN U,SWPIN1 ;LOOP FOR ALL UNITS IN SWAP LIST
MOVE T1,VIRTAL## ;GET #K VIRTUAL CORE IN SYSTEM
MOVEM T1,K4SWAP## ;AS #K FOR SWAPPING IN SYSTEM
MOVEM T1,VMCMAX## ;SAVE AS MAX K FOR VIRTUAL JOBS
POPJ P,
SUBTTL START CLOCK
;THIS ROUTINE CALLED AT THE POINT AT WHICH WE WOULD
; LIKE CLOCK TICKS TO START HAPPENING.
TIMINI:
IFN FTKL10,<
MOVE T1,.CPEPT## ;GET ADDRESS OF EPT
MOVE T1,.EPTII(T1) ;GET ADDRESS OF XPCW BLOCK
MOVEI T2,TIMINT## ;ADDRESS OF INTERRUPT ROUTINE
MOVEM T2,3(T1) ;SALT AWAY IN TM'N'INT BLOCK
CONI MTR,T1
CONO MTR,APRCHN##(T1) ;SETUP METER PI ASSIGNMENT
MOVEI T1,^D1666 ;ASSUME 60HZ
MOVE T2,STATES##
TLNE T2,(ST.CYC) ;IS OUR ASSUMPTION CORRECT?
MOVEI T1,^D2000 ;NO, 2000 IS INTERVAL
CONO TIM,TO.CTD!TO.CIT!TO.SIT(T1) ;START TIMER GOING
>;END IFN FTKL10
IFN FTKS10,<
WRAPR SP.SSF!SP.ITI ;TURN INTERVAL TIMER ON
MOVEI T1,^D17*10000 ;ASSUME 60 HZ
MOVE T2,STATES##
TLNE T2,(ST.CYC) ;IS IT?
MOVEI T1,^D20*10000 ;NO, 50HZ
WRINT T1 ;SET UP INTERVAL REG
>;END IFN FTKS10
POPJ P, ;RETURN
SUBTTL ROUTINES TO MARK AND LINK PAGTAB
;SUBROUTINE TO MARK AND LINK PAGTAB FOR THE PHYSICAL PAGES ALLOCATED TO
; THE MONITORS HIGH SEGMENT ( OR AT LEAST THINGS ABOVE 400000 )
;CALL: T1 = VIRTUAL ADDRESS OF FIRST PAGE TO ACCOUNT FOR
; T3 = LAST PAGE ACCOUNTED FOR ( RETURNED BY THIS ROUTINE )
; T4 = NUMBER OF PAGES TO LOOK AT
;
;RETURNS T3 = SET UP FOR ANY SUBSEQUENT CALL
;ALSO WRITE PROTECTS THE HIGH SEGMENT ON THE WAY THROUGH UNLESS PM.SWB
; IS LIT IN THE PAGE MAP ENTRY.
;THE SCREWY CONVENTIONS HAPPENED TO FALL OUT OF THE WAY KIINI USED TO WORK
SETMRB: LSH T1,W2PLSH
ADD T1,.CPMAP##
SETMRP: HRLI T1,(POINT 36,0)
SETMR1: ILDB T2,T1 ;GET PHYSICAL PAGE CONTAINING THE MONITOR
JUMPE T2,SETMR2 ;OK IF NOT ALLOCATED
TLNN T2,(<PM.ACD>B2^!<PM.DCD>B2) ;ANYTHING BESIDES DIRECT POINTER?
TLNN T2,(<PM.DCD>B2) ;YES, MAKE SURE DIRECT POINTER (RSVD SLOTS)
JRST SETMR2 ;THIS ISN'T A PAGE NUMBER
ANDI T2,17777 ;CLEAR THE ACCESS BITS
TLO T2,MONTRB ;INDICATE THIS PHYSICAL PAGE CONTAINS THE MONITOR
MOVEM T2,PAGTAB(T3) ; IN PAGTAB
SSX T2,MS.MEM
HRRZM T3,PT2TAB(T2) ;SET BACK LINK
HRR T3,T2 ;SAVE LAST MONITOR PAGE SEEN
SETMR2: SOJG T4,SETMR1 ;LOOP OVER ALL THE MONITORS PAGES
MOVSI T2,MONTRB ;IN CASE SOME PAGES WERE SKIPPED (T2=0)
MOVEM T2,PAGTAB(T3) ;INDICATE THE LAST PAGE OF THE MONITOR
HRRZM T3,LMPAG## ;..
POPJ P,
;SUBROUTINE TO MARK PAGES IN PAGTAB WITH THE "PHYSICALLY CONTIGUOUS" BIT.
;CALL:
; T1/ STARTING PHYSICAL PAGE NUMBER
; T2/ NUMBER OF PAGES
; PUSHJ P,SETCTB
;RETURN:
; CPOPJ ALWAYS
SETCTB: SE1ENT ;FOR PAGTAB REFERENCE
SSX T1,MS.MEM ;THE PAGTAB SECTION
MOVSI T3,CONTGB ;THE BIT WE LIKE
SETCT1: IORM T3,PAGTAB(T1) ;LIGHT IT FOR THIS PAGE
SOJLE T2,CPOPJ## ;RETURN IF NO MORE PAGES TO MARK
AOJA T1,SETCT1 ;ELSE LOOP FOR THE NEXT PAGE
SUBTTL ROUTINES TO SET/CLEAR CACHE BITS
;ROUTINE TO SET OR CLEAR CACHE BITS FOR A RANGE OF EXEC ADDRESSES.
; THE RANGE IS C(T1)R THROUGH C(T2)R INCLUSIVE.
; USES ALL T ACS, AC U WITHOUT RESTORING THEM. ORIGINAL ARGUMENTS
; IN T1 AND T2 ARE LOST.
; ARGUMENTS MUST NOT BE IN PER-PROCESS SPACE
; WHEN CALLING CCTRNS, THE SECTION MAP SHOULD BE ADDRESSABLE VIA
; EXEC VIRTUAL ADDRESS .EUPMP (SEE CALL AT CLRCC1-4).
IFN FTMP,<
CCTRNG: TDZA T3,T3 ;NOTE "ADDRESS RANGE" ENTRY
CCTRNS: SETO T3, ;NOTE "ENTIRE SECTION" ENTRY
SE1ENT ;FOR PAGTAB REFERENCES
PUSHJ P,SAVE1## ;NEED P1
MOVE P1,[TLO T2,TNCSHB] ;SET TEMPORARY
MOVE U,NCPRUN## ;GET NUMBER OF RUNNABLE CPUS
CAIN U,1 ;SKIP IF MORE THAN 1 RUNNABLE CPU
SKIPA U,[TLO T1,(PM.CSH)] ;SET CACHE BIT
MOVE U,[TLZ T1,(PM.CSH)] ;CLEAR CACHE BIT
JUMPE T3,CCBRN1 ;GO IF "ADDRESS RANGE" ENTRY
MOVEI T1,0 ;STARTING PAGE NUMBER
MOVEI T2,^D511 ;HIGHEST PAGE NUMBER
MOVEI T4,.EUPMP ;ADDRESS OF ADDRESSABLE SECTION MAP
JRST CCBRN2 ;GO DO THE ENTIRE SECTION
>; END IFN FTMP
CSBRNG: SKIPA U,[TLO T1,(PM.CSH)] ;CLEAR CACHE BIT
CCBRNG: MOVE U,[TLZ T1,(PM.CSH)] ;CLEAR CACHE BIT
IFN FTMP,<
SE1ENT ;FOR PAGTAB REFERENCES
PUSHJ P,SAVE1##
MOVE P1,[TLZ T2,TNCSHB] ;CLEAR TEMPORARY BIT
>; END IFN FTMP
CCBRN1: LSH T1,W2PLSH ;CONVERT TO PAGES
LSH T2,W2PLSH
MOVEI T4,(T1) ;COPY STARTING PAGE NUMBER
ADD T4,.CPMAP## ;ADD IN ADDRESS OF S0/1 MAP
CCBRN2: HRRZ T3,T1 ;SAVE STARTING VIRTUAL PAGE
HRLI T4,(POINT 36,0) ;SET UP BYTE POINTER TO SECTION MAP
CCBRN3: ILDB T1,T4 ;GET CONTENTS OF SLOT
JUMPE T1,CCBRN4
XCT U ;SET OR CLEAR CACHE BIT ACCORDINGLY
DPB T1,T4 ;AND PUT IT IN MAP
IFN FTMP,<
ANDI T1,17777 ;GET PHYSICAL PAGE NUMBER
SSX T1,MS.MEM ;SECTION NUMBER
EXCH T2,PAGTAB(T1) ;GET ENTRY, SAVE T2
TLNE T2,MONTRB ;A MONITOR PAGE
XCT P1 ;YES, SET/CLEAR TEMPORARY UNCACHED
EXCH T2,PAGTAB(T1) ;STORE NEW SETTING, RESTORE T2
>; END IFN FTMP
CCBRN4: CAIGE T3,(T2) ;DID WE JUST DO LAST PAGE?
AOJA T3,CCBRN3 ;LOOP, WE HAVE MORE TO DO.
POPJ P, ;YES, BYE.
SUBTTL WRITE LOCK MONITOR CODE SEGMENTS
;ROUTINE TO TURN OFF PM.WRT IN CODE SEGMENT PAGES.
;ALL OTHER PAGES ARE LEFT WRITE-ENABLED.
WRTLOK: SKIPA DEBUGF## ;PATCH TO SKIPGE IF DEBUGGING WITH MONITOR
; WRITE-ENABLED
POPJ P, ;LEAVE THINGS ALONE
MOVEI T1,WRTLKA ;GET ADDRESS OF ROUTINE
PJRST CPUAPP## ;APPLY OVER ALL CPUS
WRTLKA: MOVE T1,.CPEPT##-.CPCDB##(P1) ;GET ADDRESS OF EPT
HRRZ T2,SECTAB(T1) ;GET PAGE NUMBER OF SECTION 0 MAP
PUSHJ P,WRTLKB ;TWIDDLE THE BITS IN THE PAGE MAP
IFN FTXMON,<
HRRZ T2,SECTAB+<(MS.HGH)>(T1) ;GET PAGE NUMBER OF SECTION 2 MAP
PUSHJ P,WRTLKB ;TWIDDLE THE BITS IN THE PAGE MAP
>; END IFN FTXMON
POPJ P, ;RETURN
WRTLKB: LSH T2,P2WLSH ;CONVERT PAGE NUMBER TO AN ADDRESS
LDB T3,[POINT 14,SYSSIZ##,26] ;GET NUMBER OF LOW SEGMENT PAGES
ADD T2,T3 ;SKIP LOW SEGMENT PAGES (ALWAYS WRITABLE)
MOVNS T3 ;NEGATE THE COUNT
ADDI T3,HLCSAD##/PAGSIZ ;NUMBER OF ENTRIES IN THE MAP TO CONSIDER
WRTLK1: MOVE T4,(T2) ;GET AN ENTRY
TLZN T4,(PM.SWB) ;SKIP IF PAGE SHOULD BE WRITE ENABLED
TLZ T4,(PM.WRT) ;CLEAR WRITE ENABLE
MOVEM T4,(T2) ;SAVE THE PAGE ENTRY AWAY
SOJLE T3,CPOPJ## ;QUIT WHEN ALL ENTRIES HAVE BEEN DONE
AOJA T2,WRTLK1 ;GET NEXT ENTRY
SUBTTL SET UP INTERVAL TIMER TO GIVE CLOCK TICKS
;SETUP INTERNAL TIMER ON KL10 TO MIMIC CLOCKS OF EARLIER CPUS.
ONCINT:
IFN FTKL10,<
CONO MTR,MO.TOF!MO.CTB ;TURN OFF TIMER, CLEAR TIME BASE
MOVE T1,.CPEPT## ;GET ADDRESS OF EPT
MOVE T1,.EPTII(T1) ;GET ADDRESS OF XPCW BLOCK
MOVEM T1,ONCINJ ;SAVE FOR LATER XJEN
MOVEI T2,ONCIN0 ;GET ADDRESS OF INTERRUPT ROUTINE
MOVEM T2,3(T1) ;SALT AWAY IN TM'N'INT BLOCK
CONO MTR,MO.TON!APRCHN## ;TURN ON TIMER
MOVEI T2,^D1666+TO.SIT+TO.CTD ;WORD TO KEEP TIMER GOING
MOVE T1,STATES## ;GET STATES
TLNE T1,(ST.CYC) ;50 HZ?
MOVEI T2,^D2000+TO.SIT+TO.CTD ;50 HZ WORD TO KEEP TIMER GOING
MOVEM T2,ONCKLT ;CONO TIM,@ONCKLT STARTS TIMER GOING AGAIN
CONO TIM,TO.CIT(T2) ;CLEAR INTERNAL TIMER & START FIRST TIME
CONO PI,PI.ON!PI.TNP!<1_<7-APRCHN##>> ;MAKE SURE WE GET INTERRUPTS
POPJ P, ;RETURN
>;END IFN FTKL10
IFN FTKS10,<
WRAPR SP.SSF!SP.ITI ;TURN ON INTERVAL TIMER
MOVEI T2,^D17*10000 ;60HZ
MOVE T1,STATES ;GET STATES
TLNE T1,(ST.CYC) ;50HZ?
MOVEI T2,^D20*10000 ;YES
WRINT T2 ;SET UP INTERVAL REGISTER
POPJ P, ;RETURN
>;END IFN FTKS10
IFN FTKL10,<
;ROUTINE CALLED ON A CLOCK INTERRUPT
ONCIN0: SETOM .CPTIM## ;NOTICE CLOCK HAS TICKED
AOS APRTIM ;COUNT A USEFUL VARIABLE
CONO TIM,@ONCKLT ;CLEAR INTERNAL TIMER DONE AND START UP AGAIN
XJEN @ONCINJ ;DISMISS THE INTERRUPT
ONCINJ: BLOCK 1 ;ADDRESS OF INTERVAL TIMER XPCW BLOCK
>; END IFN FTKL10
SUBTTL CHECK CRASH DATE/TIME CHECKSUM
;ROUTINE TO CHECK DATE/TIME CHECKSUM
;RETURNS CRASH DATE IN T4
CHKDCS: HLRZ T4,CRSDTM
HRRZ T2,CRSDTM
ADD T2,T4 ;ADD DATE AND TIME
HLRZ T3,CRSWHY
ADD T2,T3 ;PLUS STOPCD NAME
HRRZ T3,CRSSTS
ADD T2,T3
ADDI T2,507601 ;PLUS MAGIC CONSTANT
HRRZ T3,CRSCHK ;GET CHECKSUM COMPUTED BY COMMON
CAIN T3,(T2) ;MATCH?
AOS (P)
POPJ P,
SUBTTL SETUP LOWER CORE LOCATIONS
SLCLDS:
IFN FTKL10,<
SKIPE [M.CPU##-1] ;IF MORE THAN 1 CPU,
SKIPA T1,[JRST SYSTOP##] ;LET WARM RESTART=J407
MOVE T1,[JRST APRWRS##] ;WARM RESTART INSTRUCTION
MOVEM T1,WRSINS ;STORE IN WARM RESTART LOCATION
>; END IFN FTKL10
IFN FTMP,<
MOVE T1,[JRST APRRES##] ;POWER FAIL-AUTO-RESTART INSTR.
>; END IFN FTMP
IFE FTMP,<
MOVE T1,[HALT APRRES##] ;HALT IF NOTHING SAVED
>; END IFE FTMP
MOVEM T1,ARSLOC ;STORE IN AUTO-RESTART LOCATION
MOVE T1,[XPCW @.CPKAF##]
MOVEM T1,KAFLOC ;STORE IT IN RIGHT SPOT
MOVE T2,.CPMAP## ;GET ADDRESS OF SECTION 0 MAP
PUSH P,.EUPMP/PAGSIZ(T2) ;SAVE TEMPORARY MAP SLOT
MOVSI T1,(<PM.DCD>B2+PM.WRT) ;MAKE HARDWARE LOCS 0-17 ADDRESSABLE
MOVEM T1,.EUPMP/PAGSIZ(T2) ; VIA .EUPMP - .EUPMP+17
CLRPT .EUPMP ;MAKE NEW MAPPING VISIBLE
MOVEI 17,.EUPMP ;MOVE HARDWARE AC'S INTO SHADOW AC'S TO CLEAR PARITY
BLT 17,.EUPMP+17 ;STOP WITH SHADOW AC 17
MOVE T1,.CPMAP## ;GET ADDRESS OF SECTION 0 MAP
POP P,.EUPMP/PAGSIZ(T1) ;RESTORE TEMPORARY MAP SLOT
CLRPT .EUPMP ;MAKE OLD MAPPING VISIBLE
POPJ P, ;RETURN
SUBTTL SET UP FREE CORE AND BITMAP
SETFPT: MOVE T1,LOWLIM## ;GET HIGHEST ADDRESS IN LOW SEGMENT
AOS T1 ;MAKE IT FIRST ADDRESS PAST LOW SEGMENT
MOVE T2,SYSSIZ## ;CURRENT END OF ALLOCATED LOW SEGMENT CORE
MOVEM T2,FREPTR## ;FREE CORE BITMAP GOES HERE
SUB T1,T2 ;COMPUTE WORDS IN BETWEEN
IDIVI T1,^D36*4 ;COMPUTE NUMBER OF BITMAP WORDS NEEDED
;DON'T ROUND SO FREPTR WON'T DESCRIBE MORE THAN
; THE SPACE UP TO LOWLIM
MOVE T3,T1 ;GET A COPY
IDIVI T3,^D36*4 ;COMPUTE NUMBER OF WORDS USED BY BITMAP
SKIPE T4 ;IF A REMAINDER,
AOS T3 ; ROUND UP
SUB T3,T1 ;SUBTRACT THAT FROM SIZE OF POOL
HRLM T3,FREPTR## ;SET UP AOBJN POINTER TO FREE CORE BITMAP
MOVMS T3 ;GET THE SIZE OF THE BITMAP
ADD T3,FREPTR## ;GET ADDRESS OF START OF FREE CORE
HRRZM T3,LOCORE## ;SET UP LOCORE
MOVE T1,LOWLIM## ;*** GET HIGHEST ADDRESS-1
AOS T1 ;*** BUMP IT
MOVEM T1,SYSSIZ## ;*** FAKE OUT SYSTAT AND FRIENDS
MOVE T1,FREPTR## ;GET POINTER TO BITMAP
SETZM (T1) ;MAKE SURE IT IS ZEROED
AOBJN T1,.-1
POPJ P, ;RETURN
SUBTTL ONCE-ONLY/BOOTSTRAP INTERFACE -- BUILD THE SYSTEM LISTS
BLDSSL::SE1ENT ;ENTER SECTION ONE
MOVEI T1,.BTSSL ;OFFSET
SKIPE PRESSL ;USING THE PRESERVED SSL?
PUSHJ P,BTDATA## ;BOOTSTRAP AVAILABLE?
POPJ P, ;NO
MOVEI T3,[ASCIZ/system search list/]
PUSHJ P,SETENT ;SET POINTERS
BLDSS1: PUSHJ P,NXTENT ;GET NEXT ENTRY
JRST BLDSS2 ;NO MORE DATA--ALL STRUCTURES VALID
PUSHJ P,FNSTR## ;DOES THIS STRUCTURE EXIST?
PUSHJ P,BADSTR ;NO--COMPLAIN TO OPERATOR
JRST BLDSS1 ;GO CHECK OUT THE NEXT STRUCTURE
BLDSS2: PUSHJ P,RSTENT ;RESET POINTERS
SKIPN PRECNT ;ANY ENTRIES FOUND?
AOS PREERR ;NO--CALL THIS AN ERROR
SKIPN PREERR ;ANY ERRORS?
JRST BLDSS3 ;NO
PUSHJ P,BLDDSK ;TELL OPERATOR WE WILL USE DISK DATA BASE
POPJ P, ;GIVE UP
BLDSS3: HLRZ T1,SYSSTR## ;POINT TO START OF STR DB CHAIN
BLDSS4: SETOM STRSRC##(T1) ;EMPTY THE SSL
HLRZ T1,STRSYS##(T1) ;GET NEXT STR DB
JUMPN T1,BLDSS4 ;LOOP
BLDSS5: PUSHJ P,NXTENT ;GET NEXT ENTRY
JRST CPOPJ1## ;RETURN
PUSHJ P,FNSTR## ;FIND THE STR DB
JRST BLDSS5 ;CAN'T HAPPEN
HRRZ T2,BLDPTR ;GET RELATIVE OFFSET IN TABLE
MOVEM T2,STRSRC##(P2) ;MAKE THAT THE POSITION IN THE SSL
JRST BLDSS5 ;LOOP FOR THE NEXT STRUCTURE
BLDASL::SE1ENT ;ENTER SECTION ONE
MOVEI T1,.BTASL ;OFFSET
SKIPE PREASL ;USING THE PRESERVED ASL?
PUSHJ P,BTDATA## ;BOOTSTRAP AVAILABLE?
POPJ P, ;NO
MOVEI T3,[ASCIZ/active swapping list/]
PUSHJ P,SETENT ;SET POINTERS
BLDAS1: PUSHJ P,NXTENT ;GET NEXT ENTRY
JRST BLDAS2 ;NO MORE DATA--ALL UNITS VALID
MOVE T2,T1 ;PUT NAME IN PROPER PLACE
PUSHJ P,FNDUNI ;DOES THIS UNIT EXIST?
JRST [PUSHJ P,BADUNI ;NO--COMPLAIN TO OPERATOR
JRST BLDAS1] ;GO CHECK OUT THE NEXT UNIT
LDB T1,UNYK4S## ;GET SWAPPING SPACE ALLOCATED ON UNIT
SKIPG T1 ;HAVE ANY?
PUSHJ P,BLDSWP ;NO--COMPLAIN TO OPERATOR
JRST BLDAS1 ;GO CHECK OUT THE NEXT UNIT
BLDAS2: PUSHJ P,RSTENT ;RESET POINTERS
SKIPN PRECNT ;ANY ENTRIES FOUND?
AOS PREERR ;NO--CALL THIS AN ERROR
SKIPN PREERR ;ANY ERRORS?
JRST BLDAS3 ;NO
PUSHJ P,BLDDSK ;TELL OPERATOR WE WILL USE DISK DATA BASE
POPJ P, ;GIVE UP
BLDAS3: HLRZ T1,SYSUNI## ;POINT TO START OF UDB CHAIN
BLDAS4: SETOM UNISUN(T1) ;EMPTY THE ASL
HLRZ T1,UNISYS(T1) ;GET NEXT UDB
JUMPN T1,BLDAS4 ;LOOP
BLDAS5: PUSHJ P,NXTENT ;GET NEXT ENTRY
JRST CPOPJ1## ;DONE
MOVE T2,T1 ;PUT NAME IN PROPER PLACE
PUSHJ P,FNDUNI ;FIND THE UDB
JRST BLDAS5 ;CAN'T HAPPEN
HRRZ T2,BLDPTR ;GET RELATIVE OFFSET IN TABLE
MOVEM T2,UNISUN(U) ;MAKE THAT THE POSITION IN THE ASL
JRST BLDAS5 ;LOOP FOR THE NEXT UNIT
FNDUNI: HLRZ U,SYSUNI## ;GET FIRST UNIT DATA BLOCK IN SYSTEM
FNDUN1: CAME T2,UNIHID(U) ;ACCEPT MATCH ON UNIT ID
CAMN T2,UDBNAM(U) ;MATCH?
JRST CPOPJ1## ;YES - SKIP RETURN
HLRZ U,UNISYS(U) ;GET NEXT UNIT DATA BLOCK ADR. IN SYSTEM
JUMPN U,FNDUN1 ;REPEAT IF THERE IS ONE
POPJ P, ;NONE FOUND - NON SKIP RETURN
BLDSDL::SE1ENT ;ENTER SECTION ONE
MOVEI T1,.BTSDL ;OFFSET
SKIPE PRESDL ;USING THE PRESERVED SDL?
PUSHJ P,BTDATA## ;BOOTSTRAP AVAILABLE?
POPJ P, ;NO
MOVEI T3,[ASCIZ/system dump list/]
PUSHJ P,SETENT ;SET POINTERS
BLDSD1: PUSHJ P,NXTENT ;GET NEXT ENTRY
JRST BLDSD2 ;NO MORE DATA--ALL STRUCTURES VALID
PUSHJ P,FNSTR## ;DOES THIS STRUCTURE EXIST?
PUSHJ P,BADSTR ;NO--COMPLAIN TO OPERATOR
JRST BLDSD1 ;GO CHECK OUT THE NEXT STRUCTURE
BLDSD2: PUSHJ P,RSTENT ;RESET POINTERS
SKIPN PRECNT ;ANY ENTRIES FOUND?
AOS PREERR ;NO--CALL THIS AN ERROR
SKIPN PREERR ;ANY ERRORS?
JRST BLDSD3 ;NO
PUSHJ P,BLDDSK ;TELL OPERATOR WE WILL USE DISK DATA BASE
POPJ P, ;GIVE UP
BLDSD3: HLRZ T1,SYSSTR## ;POINT TO START OF STR DB CHAIN
BLDSD4: SETOM STRSDL##(T1) ;EMPTY THE SDL
HLRZ T1,STRSYS##(T1) ;GET NEXT STR DB
JUMPN T1,BLDSD4 ;LOOP
BLDSD5: PUSHJ P,NXTENT ;GET NEXT ENTRY
JRST CPOPJ1## ;DONE
PUSHJ P,FNSTR## ;FIND THE STR DB
JRST BLDSD5 ;CAN'T HAPPEN
HRRZ T2,BLDPTR ;GET RELATIVE OFFSET IN TABLE
MOVEM T2,STRSDL##(P2) ;MAKE THAT THE POSITION IN THE SDL
JRST BLDSD5 ;LOOP FOR THE NEXT STRUCTURE
SUBTTL ONCE-ONLY/BOOTSTRAP INTERFACE -- MISCELLANEOUS ROUTINES
;SET UP TO ACCESS BOOTSTRAP VECTOR ENTRIES
;CALL: MOVE T1, LENGTH OF TABLE
; MOVE T2, TABLE ADDRESS
; MOVE T3, IDENTIFYING TEXT (OR -1 IF NOT TO STORE ANY)
; PUSHJ P,SETENT
; <RETURN>
SETENT: ADJSP T1,-1 ;PREDECREMENT POINTER
SUBI T2,1 ;PREDECREMENT ADDRESS
MOVEM T1,BLDPTR ;SAVE POINTER
MOVEM T1,SAVPTR ;MAKE A COPY
MOVEM T2,BLDTBL ;SAVE ADDRESS
MOVEM T2,SAVTBL ;MAKE A COPY
SKIPL T3 ;STORE BUILD TEXT?
MOVEM T3,BLDTXT ;YES
SETZM PRECNT ;CLEAR COUNT OF ENTRIES FOUND
SETZM PREERR ;CLEAR ERROR FLAG
POPJ P, ;RETURN
;RESET THE VECTOR ENTRY POINTERS
;CALL: PUSHJ P,RSTENT
; <RETURN>
RSTENT: MOVE T1,SAVPTR ;GET SAVED POINTER
MOVEM T1,BLDPTR ;RESET IT
MOVE T1,SAVTBL ;GET SAVED ADDRESS
MOVEM T1,BLDTBL ;RESER IT
POPJ P, ;RETURN
;RETRIEVE THE NEXT ENTRY
;CALL: PUSHJ P,NXTENT
; <NON-SKIP> ;RAN OUT OF DATA
; <SKIP> ;T1 CONTAINS THE ENTRY
NXTENT: MOVE T1,BLDPTR ;GET AOBJN POINTER
AOBJP T1,CPOPJ## ;RETURN IF DONE
MOVEM T1,BLDPTR ;UPDATE
AOS BLDTBL ;ADVANCE POINTER
SKIPN T1,@BLDTBL ;GET NEXT ENTRY
JRST NXTENT ;EMPTY SLOT--TRY AGAIN
AOS PRECNT ;COUNT THE ENTRY
JRST CPOPJ1## ;RETURN
;TELL THE OPERATOR THE PRESERVED DATA CANNOT BE USED
;CALL: PUSHJ P,BLDDSK
; <RETURN>
BLDDSK: MOVEI T1,[ASCIZ /[Rebuilding the /]
PUSHJ P,ICONM ;TYPE TEXT
MOVE T1,BLDTXT ;GET TEXT
PUSHJ P,CONMES## ;TYPE IT
MOVEI T1,[ASCIZ/ from the HOM blocks]
/]
PUSHJ P,CONMES## ;TYPE TEXT
PJRST CRLFOP ;APPEND A CRLF AND RETURN
;TELL THE OPERATOR THAT A STRUCTURE OR LOGICAL UNIT IS MISSING
;CALL: MOVE T1, SIXBIT NAME
; PUSHJ P,BADSTR/BADUNI
; <RETURN>
BADSTR: SKIPA T2,[[ASCIZ/%Structure /]]
BADUNI: MOVEI T2,[ASCIZ/%Logical unit /]
AOS PREERR ;FLAG THE ERROR
PUSH P,T1 ;SAVE STRUCTURE OR LOGICAL UNIT NAME
MOVE T1,T2 ;POINT TO TEXT
PUSHJ P,ICONM ;TYPE IT
POP P,T2 ;GET STRUCTURE NAME BACK
PUSHJ P,PRNAME## ;TYPE IT
MOVEI T1,[ASCIZ/ missing from the /]
PUSHJ P,CONMES## ;TYPE TEXT
MOVE T1,BLDTXT ;GET IDENTIFIER
PUSHJ P,CONMES## ;TYPE IT
PJRST CRLFOP ;APPEND A CRLF AND OUTPUT
;TELL THE OPERATOR A UNIT HAS NO SWAPPING SPACE ALLOCATED
;CALL: MOVE U, UDB ADDRESS
; PUSHJ P,BLDSWP
; <RETURN>
BLDSWP: AOS PREERR ;FLAG THE ERROR
MOVEI T1,[ASCIZ/%No swapping space allocated on /]
PUSHJ P,ICONM ;TYPE TEXT
MOVE T2,UDBNAM(U) ;GET PHYSICAL UNIT NAME
PUSHJ P,PRNAME## ;TYPE IT
SKIPN UNIHID(U) ;HAVE A UNIT-ID?
PJRST CRLFOP ;NO--APPEND A CRLF AND OUTPUT
MOVEI T1,[ASCIZ/ (/] ;SEPARATE FROM
PUSHJ P,CONMES## ; PHYSICAL NAME
MOVE T2,UNIHID(U) ;GET LOGICAL UNIT NAME
PUSHJ P,PRNAME## ;TYPE IT
MOVEI T1,[ASCIZ /)/] ;TERMINATE
PUSHJ P,CONMES## ;TYPE TEXT
PJRST CRLFOP ;APPEND A CRLF AND OUTPUT
SUBTTL CORE ALLOCATOR ROUTINES
;ROUTINE TO ALLOCATE BIT MAP CORE
;CALL: MOVE T1, NUMBER OF WORDS
; PUSHJ P, INICORE
; <RETURN> ;T1 UNCHANGED, T2 HAS ADDRESS
;
;ALL ACS PRESERVED
INICOR::PUSH P,T1 ;SAVE NUMBER OF WORDS
MOVEI T2,(T1) ;COPY WORD COUNT
PUSH P,[EXP 0] ;RESERVE SPACE ON STACK
PUSH P,T3 ;SAVE T3
PUSH P,T4 ;SAVE T4
PUSHJ P,GETWDS## ;ALLOCATE CORE
STOPCD .+1,STOP,NCS, ;++ NO CORE AT SYSINI TIME
MOVEM T1,-2(P) ;SAVE START ADDRESS
SETZM (T1) ;CLEAR FIRST WORD
MOVEI T2,(T1) ;MAKE A COPY
HRLI T1,1(T1) ;ADDR+1
MOVSS T1 ;MAKE A BLT POINTER
ADD T2,-3(P) ;COMPUTE END OF BLT
BLT T1,-1(T2) ;CLEAR CORE
POP P,T4 ;RESTORE T4
POP P,T3 ;RESTORE T3
POP P,T2 ;RESTORE ADDRESS
POP P,T1 ;RESTORE NUMBER OF WORDS
POPJ P, ;RETURN
SUBTTL DATA STORAGE
DEVICE: BLOCK 1 ;MONITOR BOOTSTRAP DEVICE
FNAME: BLOCK 1 ;MONITOR BOOTSTRAP FILE NAME
FEXT: BLOCK 1 ;MONITOR BOOTSTRAP EXTENSION
PPN: BLOCK 1 ;MONITOR BOOTSTRAP PPN
SFDLST: BLOCK 5 ;MONITOR BOOTSTRAP SFDS
PRESSL::BLOCK 1 ;NON-ZERO IF USING PRESERVED SSL
PREASL::BLOCK 1 ;NON-ZERO IF USING PRESERVED ASL
PRESDL::BLOCK 1 ;NON-ZERO IF USING PRESERVED SDL
PRECNT: BLOCK 1 ;COUNT OF ENTRIES FOUND
PREERR: BLOCK 1 ;NON-ZERO IF AN ERROR DETECTED
BLDTXT: BLOCK 1 ;ADDRESS OF IDENTIFYING TEXT
BLDTBL: BLOCK 1 ;ADDRESS OF TABLE IN BOOTSTRAP VECTOR
BLDPTR: BLOCK 1 ;AOBJN POINTER TO TABLE
SAVTBL: BLOCK 1 ;SAVED ADDRESS OF TABLE IN BOOTSTRAP VECTOR
SAVPTR: BLOCK 1 ;SAVED AOBJN POINTER TO TABLE
TXTBUF::BLOCK <TXTLEN==30> ;RANDOM TEXT BUFFER
TXTPTR: BLOCK 1 ;BYTE POINTER TO TXTBUF
TXTCNT: BLOCK 1 ;BYTE COUNT
CHKDAT: BLOCK 1 ;LOCAL STORAGE FOR DATE (12 BIT)
CRSDAY: BLOCK 1 ;DATE OF LAST CRASH
FETFLG: BLOCK 1 ;-1 IF GOT DATE FROM A FE
CHGFLG::BLOCK 1 ;CHANGE RATHER THAN DEFINE
GOFLAG: BLOCK 1 ;NON-ZERO IF "GO" TYPED
MMTSIZ: BLOCK 1 ;SIZE OF MEMORY MANAGEMENT TABLES (IN WORDS)
IGNORE::BLOCK 1 ;/NOERROR FLAG
SRLNXM: BLOCK 1 ;POINTER TO NXMTAB FOR ERROR.SYS
LODTIM: BLOCK 1 ;TIME OF RELOAD
CRSSAV: BLOCK 1 ;SAVED COPY OF CRSDTM
;CONSTANTS
ONCTIP: 0 ;TYPE-IN POINTER
ONCTCH::0 ;LAST CHAR TYPED IN.
ONCTOP: 0 ;TYPE-OUT POINTER
ONCCNT: 0 ;COUNTER FOR TYO
ALTMFL::0 ;ALTMODE TYPED FLAG
SAWCMT: 0 ;COMMENT CHARACTER SEEN FLAG
LINEP: POINT 7,LINBUF ;INPUT AND OUTPUT LINE BUFFER
LINBUF: BLOCK <BUFLEN==150> ;LINE BUFFER (LONG ENOUGH FOR WHY RELOAD)
ONCTSZ==<BUFLEN*5>-1 ;CHARACTERS WHICH FIT IN OUTPUT BUFFER
IFN FTMP,<
CPUTMS: XWD 3,0 ;TIME TO WAIT FOR A CPU TO START PROCESSING
CPUTIM: XWD <3*ONCTIM##>,0 ;NORMAL HUNG CPU TIMER
CPUSUB::BLOCK 1 ;ADDR OF SUBROUTINE TO EXECUTE
CPUNUM::BLOCK 1 ;TARGET CPU NUMBER
CPUACS::BLOCK 20 ;ACS
CPUFLG::BLOCK 1 ;SUCESS/FAILURE FLAG
CPUASF: EXP 0 ;BIT MASK OF CPUS DOING ASYNCHRONOUS ONCE IO
> ;END IFN FTMP
SUBTTL THE END
RADIX 8
XLIST ;LITERALS
LIT
LIST
VAR ;JUST IN CASE
SYSEND::END ;END OF SYSINI