Trailing-Edge
-
PDP-10 Archives
-
bb-h138e-bm_tops20_v6_1_distr
-
6-1-documentation/setspd.tco
There are 21 other files named setspd.tco in the archive. Click here to see a list.
TOPS20 Change Order Number 4.1.1096
Written by: OSMAN 29-Feb-80 13:21:58
Edit checked: NO Document: YES
TCO Tested: NO Maintenance Release: NO
Hardware-related: NO
Program: SETSPD
Related TCO's:
Related SPR's:
Problem: You can't say
ENABLE CLASS-SCHEDULING POLICY-PROGRAM
but you can say
ENABLE CLASS-SCHEDULING POLICY
Diagnosis: SETSPD uses TEXTI and break mask doesn't include hyphen.
Solution: Change SETSPD to use COMND. The following changes are noticable:
1) Commands that fail are displayed with the error message,
if detected by COMND.
2) The logical name in the DEFINE command requires the colon.
[End of TCO 4.1.1096]
TOPS20 Change Order Number 4.1.1107
Written by: OSMAN 12-Mar-80 14:13:52
Edit checked: NO Document: YES
TCO Tested: NO Maintenance Release: NO
Hardware-related: NO
Program: SETSPD
Related TCO's:
Related SPR's:
Problem: Make minor releases look for n-m-CONFIG.CMD where m is the minor
release number
Diagnosis: Was looking for nx-CONFIG.CMD where "x" was A for 1, B for 2 etc.
Solution: Fix it
[End of TCO 4.1.1107]
TOPS20 Change Order Number 5.1040
Written by: LYONS 15-May-80 13:27:32
Edit checked: NO Document: NO
TCO Tested: NO Maintenance Release: NO
Hardware-related: NO
Program: SETSPD
Related TCO's:
Related SPR's:
Problem: SETSPD LOOKS FOR 4-1-CONFIG.CMD
Diagnosis: SETSPD needs a version update
Solution: Update the versions
[End of TCO 5.1040]
TOPS20 Change Order Number 5.1346
Written by: ZIMA 24-May-81 15:13:35
Edit checked: NO Document: NO
TCO Tested: NO Maintenance Release: YES
Hardware-related: NO
Program: SETSPD
Related TCO's: 5.1345
Related SPR's:
Problem:
With TCO 5.1345 SETSPD may set a printer desired to be lowercase to
uppercase, depending on the exact commands in the configuaration file.
Diagnosis:
SETSPD does not latch the setting of MO%LCP, and may clear it if a
subsequent printer command in the configuration file does not contain the
lowercase keyword. The old characteristic should be preserved to avoid
having to change existing configuration files.
Solution:
Have SETSPD latch the lowercase setting of a printer when encountered,
so that any subsequent printer commands for the unit preserve the lowercase
status.
[End of TCO 5.1346]
TOPS20 Change Order Number 5.1352
Written by: PAETZOLD 28-May-81 11:41:55
Edit checked: NO Document: NO
TCO Tested: NO Maintenance Release: NO
Hardware-related: NO
Program: SETSPD
Related TCO's:
Related SPR's:
Problem: SETSPD complains about invalid keywords when started at evec offset
4. All this typeout to the cty sometimes causes J0NRUN's
Diagnosis: Only valid keyword is MAGTAP.
Solution: Change error handler to check for invalid keywords when started at
offset 4.
[End of TCO 5.1352]
TOPS20 Change Order Number 5.1401
Written by: DONAHUE 8-Jul-81 14:57:40
Edit checked: NO Document: NO
TCO Tested: NO Maintenance Release: NO
Hardware-related: NO
Program: SETSPD
Related TCO's:
Related SPR's: 16340
Problem:
SETSPD outputs an error message when the system is booted (COULD
NOT SET MTA X SERIAL XXXX).
Diagnosis:
SETSPD does not know about TU77's.
Solution:
Add an entry for TU77's in SETSPD's SLAVT table.
[End of TCO 5.1401]
TOPS20 Change Order Number 5.1424
Written by: MOSER 20-Jul-81 15:43:18
Edit checked: NO Document: NO
TCO Tested: NO Maintenance Release: NO
Hardware-related: NO
Program: SETSPD
Related TCO's:
Related SPR's:
Problem: SYSTEM MANAGERS GUIDE TALKS ABOUT BATCH-BACKGROUND COMMAND WHICH
DOESN'T SEEM TO EXIST.
Diagnosis: COMMAND IS BACKGROUND IN SETSPD.
Solution: CHANGE COMMAND NAME TO BATCH-BACKGROUND.
[End of TCO 5.1424]
TOPS20 Change Order Number 5.1438
Written by: ZIMA 3-Aug-81 12:50:18
Edit checked: NO Document: NO
TCO Tested: NO Maintenance Release: YES
Hardware-related: NO
Program: SETSPD
Related TCO's:
Related SPR's: 16418
Problem:
If the "ALL" keyword is used in the n-CONFIG.CMD file to denote
times for automatic accounting shift change to occur, Fridays are
missed.
Diagnosis:
The argument for the keyword omits the bit for Friday.
Solution:
Include the bit for Friday in the DOWTAB table.
[End of TCO 5.1438]
TOPS20 Change Order Number 5.1461
Written by: PAETZOLD 26-Aug-81 20:01:44
Edit checked: NO Document: NO
TCO Tested: NO Maintenance Release: NO
Hardware-related: NO
Program: SETSPD
Routines Affected: STG gloBs
Related TCO's:
Related SPR's:
Problem:
Queued SYSERR blocks in dumps dont make it to ERROR.SYS.
Diagnosis:
SETSPD assumes that physical address's and monitor virtual address's are
the same. They are not.
Solution:
Teach SETPSD to read and interpret MMAP. Use MMAP to determine physical
page numbers of monitor pages. MMAPWD (location 25) points to MMAP.
[End of TCO 5.1461]
TOPS20 Change Order Number 5.1468
Written by: PAETZOLD 27-Aug-81 09:35:57
Edit checked: NO Document: NO
TCO Tested: NO Maintenance Release: NO
Hardware-related: NO
Program: SETSPD
Related TCO's:
Related SPR's:
Problem:
SETSPD is not copying queued syserr blocks from dumps.
Diagnosis:
SETSPD assumes physical (dump) and virtual (monitor address space) pages
are the same. The are not always.
Solution:
Change SETSPD to look into MMAP for monitor page mappings.
Create a new offset in page 0 at address 000031 that points to MMAP
for SETSPD to read.
[End of TCO 5.1468]
TOPS20 Change Order Number 5.1681
Written by: PAETZOLD 17-Jan-82 19:09:30
Edit checked: NO Document: NO
TCO Tested: NO Maintenance Release: NO
Hardware-related: NO
Program: SETSPD
Routines Affected: change
Related TCO's:
Related SPR's:
Problem:
CHANGE commands from the n-config.cmd file dont work.
Diagnosis:
At change plus a few after the call to rfield code is wrong. Time is not
in ac D but in DATBLK+3.
Solution:
fix the code.
[End of TCO 5.1681]