Trailing-Edge
-
PDP-10 Archives
-
bb-h138e-bm_tops20_v6_1_distr
-
galaxy-sources/oprlog.mac
There are 36 other files named oprlog.mac in the archive. Click here to see a list.
TITLE OPRLOG ORION MODULE FOR BUILDING THE ORION LOG FILE
SUBTTL Preliminaries
;
;
; COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION
; 1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SEARCH GLXMAC,ORNMAC,QSRMAC
PROLOG(OPRLOG)
ERRSET ;INITIALIZE ERROR TABLES
EXTERNAL G$ARG1 ;ARGUMENT 1
EXTERNAL G$ARG2 ;ARGUMENT 2
EXTERNAL G$ARG3 ;ARGUMENT 3
EXTERNAL G$JOB ;JOB NUMBER FROM IPCF MESSAGE
EXTERNAL .JBVER ;VERSION LOCATION INFO
;Version numbers
LOGMAN==:23 ;Maintenance edit number
LOGDEV==:32 ;Development edit number
VERSIN (LOG) ;Generate edit number
COMMENT \
THIS MODULE IS CALLED BY EACH MESSAGE WITHIN ORION FOR THE
PURPOSE OF LOGGING THE INFORMATION IN THE ORION LOG FILE.
IF THE ORION STARTUP FILE HAS TURNED OFF LOGGING THEN NO LOG
FILE WILL BE CREATED AND THE ROUTINES WILL JUST RETURN
\
EXTERNAL GOODMS ;GOOD MESSAGE COUNT
EXTERNAL G$NOW ;TIME OF DAY FIELD
EXTERNAL JOBTXT ;JOB TEXT HEADER
EXTERNAL GETJBT ;GET JOB DATA
EXTERNAL G$OPRA ;OPR ADDRESS
EXTERNAL JOBTER ;TERMINAL DATA
EXTERNAL G$SND ;PID OF SENDER
EXTERNAL JOBNAM ;PROGRAM NAME BEING RUN
SUBTTL Table of Contents
; Table of Contents for OPRLOG
;
;
; Section Page
; 1. Preliminaries. . . . . . . . . . . . . . . . . . . . . 1
; 2. Table of Contents. . . . . . . . . . . . . . . . . . . 2
; 3. Revision history . . . . . . . . . . . . . . . . . . . 3
; 4. Required data for logging. . . . . . . . . . . . . . . 4
; 5. L$INIT . . . . . . . . . . . . . . . . . . . . . . . . 6
; 6. L$NEWL - ROUTINE TO RENAME THE OLD LOG FILE TO A BACKUP 7
; 7. L$OPNL . . . . . . . . . . . . . . . . . . . . . . . . 8
; 8. L$ABORT. . . . . . . . . . . . . . . . . . . . . . . . 9
; 9. L$REL. . . . . . . . . . . . . . . . . . . . . . . . . 10
; 10. L$CLOS . . . . . . . . . . . . . . . . . . . . . . . . 11
; 11. L$EXIT . . . . . . . . . . . . . . . . . . . . . . . . 11
; 12. LOGCHK . . . . . . . . . . . . . . . . . . . . . . . . 12
; 13. L$CMD. . . . . . . . . . . . . . . . . . . . . . . . . 13
; 14. L$AOPR . . . . . . . . . . . . . . . . . . . . . . . . 14
; 15. L$DOPR . . . . . . . . . . . . . . . . . . . . . . . . 15
; 16. L$NTFY . . . . . . . . . . . . . . . . . . . . . . . . 17
; 17. L$SHWA . . . . . . . . . . . . . . . . . . . . . . . . 18
; 18. L$SHWM . . . . . . . . . . . . . . . . . . . . . . . . 19
; 19. L$ERR. . . . . . . . . . . . . . . . . . . . . . . . . 20
; 20. L$KMJB . . . . . . . . . . . . . . . . . . . . . . . . 20
; 21. L$WTO. . . . . . . . . . . . . . . . . . . . . . . . . 21
; 22. L$WTOR . . . . . . . . . . . . . . . . . . . . . . . . 21
; 23. L$ACK. . . . . . . . . . . . . . . . . . . . . . . . . 21
; 24. L$NACK . . . . . . . . . . . . . . . . . . . . . . . . 21
; 25. L$LOG. . . . . . . . . . . . . . . . . . . . . . . . . 22
; 26. LOGRTN . . . . . . . . . . . . . . . . . . . . . . . . 23
; 27. L$GSYS . . . . . . . . . . . . . . . . . . . . . . . . 24
; 28. L$SETF . . . . . . . . . . . . . . . . . . . . . . . . 25
SUBTTL Revision history
COMMENT \
23 1-Feb-82
Fix QAR 10-06813 at L$NACK
***** Release 4.2 -- begin maintenance edits *****
***** Release 5.0 -- begin development edits *****
30 5.1003 4-Jan-82
Move to new development area. Add version vector. Clean up
edit organization. Update TOC.
31 5.1048 24-Oct-83
Increase the size of the backup FD so increases in the size
will fit. Set the sizes of the log fds to unique names to prevent confusion.
32 5.1217 14-May-85
Rename the operator log with a byte size of 7.
\ ;End of Revision History
SUBTTL Required data for logging
SYSPRM SYSNSZ,5,15 ;SIZE OF SYSTEM NAME BLOCK
$DATA LOGSNM,SYSNSZ ;SAVE 10 WORDS FOR SYSTEM NAME
$DATA LOGIDN,1 ;SAVE LOG LINE IDENT
$GDATA LOGOPN,1 ;LOG FILE OPEN FLAG (-1 OPEN)
$DATA LOGIFN,1 ;LOG FILE IFN
$DATA LOGMOR,1 ;MORE TEXT COMING
LOGFOB: LOGFD ;LOG FILE FD ADDRESS
EXP 7 ;BYTE SIZE IS 7
LOGINT:: EXP O.LENA ;ENABLE/DISABEL LOGGING VALUE
FRBBLK: LOGFD ;OLD LOG FILE FD
BACKUP ;NEW LOG FILE FD
0,,0 ;NO
0,,0 ; ACCESS CHECK
FR.NFO ;WANT NEW FILE ONLY
EXTERN NULTXT
EXTCNT: EXP -1 ;FILE EXTENSION COUNTER
EXTPTR: BLOCK 1 ;FILE EXTENSION BYTE POINTER
BYTPTR: BLOCK 1 ;FILE EXTENSION BYTE POINTER
;Define the primary operator log file FD
LOGFD:: LOGLN,,0 ;FD BLOCK LENGTH
TOPS10< DEFINE X(A),<SIXBIT/A/> ;DEFINE X MACRO FOR O$LOGN MACRO
EXP FSSSTR ;DEVICE FOR THE OPERATOR LOG
EXP O$LOGN ;FILENAME FOR THE LOG
SIXBIT/LOG/ ;.LOG EXTENSION
3,,3 ;SPOOL AREA
LOGLN==.-LOGFD ;CALC THE BLOCK LENGTH
> ;END TOPS10 CONDITIONAL
TOPS20< DEFINE X(A),<ASCIZ/PS:<SPOOL>'A'.LOG/>
O$LOGN ;GEN THE LOG FILE NAME
LOGLN==.-LOGFD ;CALC THE BLOCK LENGTH
> ;END TOPS20 CONDITIONAL
;Define the backup operator log file FD
BACKUP: BACKLN,,0 ;FD BLOCK LENGTH
TOPS10< DEFINE X(A),<SIXBIT/A/> ;DEFINE X MACRO FOR O$LOGN MACRO
EXP FSSSTR ;DEVICE FOR THE OPERATOR LOG
EXP O$LOGN ;FILENAME FOR THE LOG
SIXBIT/000/ ;.000 EXTENSION
3,,3 ;SPOOL AREA
BACKLN==.-BACKUP ;CALC THE BLOCK LENGTH
> ;END TOPS10 CONDITIONAL
TOPS20< DEFINE X(A),<ASCIZ/PS:<SPOOL>'A'-LOG.000/>
O$LOGN ;GEN THE LOG FILE NAME
BLOCK <MXFSPC/5+1>-<.-BACKUP> ;Allocate to allow name to grow
; figure max words needed minus
; number of words already allocated
BACKLN==.-BACKUP ;CALC THE BLOCK LENGTH
> ;END TOPS20 CONDITIONAL
;Define the debugging operator log file FD
DEBFD: DEBLN,,0 ;FD BLOCK LENGTH
TOPS10< DEFINE X(A),<SIXBIT/A/> ;DEFINE X MACRO FOR O$LOGN MACRO
SIXBIT/DSK/ ;SEND LOG FILE TO DSK:
EXP O$LOGN ;FILENAME FOR THE LOG
SIXBIT/LOG/ ;.LOG EXTENSION
0,,0 ;USERS AREA
DEBLN==.-DEBFD ;CALC THE BLOCK LENGTH
> ;END TOPS10 CONDITIONAL
TOPS20< DEFINE X(A),<ASCIZ/DSK:'A'.LOG/>
O$LOGN ;GEN THE LOG FILE NAME
DEBLN==.-DEBFD ;CALC THE BLOCK LENGTH
> ;END TOPS20 CONDITIONAL
SUBTTL L$INIT Initialize the logfile
;THIS ROUTINE WILL SETUP THE NECESSARY DEFAULTS AND DO THE
;RENAME OF THE OLD LOG FILE IF PRESENT.
L$INIT::SETZM LOGOPN ;CLEAR LOG FILE OPEN FLAG
MOVEI S1,LOGFD ;GET THE LOG FILE FD ADDRESS
SKIPE DEBUGW ;DEBUGGING ???
MOVEI S1,DEBFD ;YES,,GET THE DEBUGGING FD ADDRESS
MOVEM S1,LOGFOB ;SAVE IT IN THE LOG FILE OPEN BLOCK
TOPS10< MOVX S1,%LDQUE ;GET THE SYSTEM QUEUE AREA
GETTAB S1, ; FROM THE MONITOR
MOVE S1,[3,,3] ;DEFAULT TO 3,,3
MOVEM S1,LOGFD+.FDPPN ;SET THE LOG FILE PPN
SETOM S1 ;GET THE USERS
GETPPN S1, ; PPN
JFCL ;BETTER SUCCEED !!!
MOVEM S1,DEBFD+.FDPPN ;SAVE THE PPN IN DEBUG FD
MOVE S1,LOGFD+.FDSTR ;GET THE STRUCTURE
MOVEM S1,LOGSNM ;SAVE IT
MOVE S1,[5,,LOGSNM] ;GET DSKCHR PARMS
DSKCHR S1, ;GET THE PHYSICAL STRUCTURE NAME
SKIPA S1,LOGSNM ;FAILED,,GET THE ORIGIONAL STR NAME BACK
MOVE S1,LOGSNM+.DCSNM ;WIN,,GET THE REAL STRUCTURE NAME
MOVEM S1,LOGFD+.FDSTR ;SET IT IN THE LOG FD
MOVEM S1,BACKUP+.FDSTR ;SET IT IN THE BACKUP FD
MOVE S1,[POINT 6,BACKUP+.FDEXT] ;GET THE OUTPUT FILE EXT POINTER
MOVEM S1,BYTPTR ;SAVE THE EXT BYTE POINTER
> ;END TOPS10 CONDITIONAL
TOPS20< MOVX S1,GJ%OFG+GJ%SHT ;PARSE-ONLY AND SHORT JFN
HRROI S2,BACKUP+.FDFIL ;POINT TO THE LOG FILE FILE NAME
GTJFN ;GET THE JFN
$RETT ;FAILED,,JUST APPEND THE LOG FILE
MOVE S2,S1 ;GET THE JFN IN S2
HRROI S1,BACKUP+.FDFIL ;POINT TO WHERE WE WANT THE FILE PUT
MOVX T1,<1B2+1B5+1B8+JS%PAF> ;WANT DEVICE+DIRECTORY+FILENAME
JFNS ;GET IT
ERJMP .+2 ;IF AN ERROR,,CONTINUE ONWARD
MOVEM S1,BYTPTR ;SAVE THE EXT BYTE POINTER
MOVEI S1,"." ;GET A PERIOD (FOR EXTENSION)
IDPB S1,BYTPTR ;SAVE IT
MOVE S1,S2 ;GET THE JFN BACK
RLJFN ;RELEASE IT
JFCL ;IGNORE ANY ERROR
> ;END TOPS20 CONDITIONAL
PUSHJ P,L$NEWL ;RENAME THE OLD LOG FILE SPEC
$RETT ;RETURN
SUBTTL L$NEWL - ROUTINE TO RENAME THE OLD LOG FILE TO A BACKUP
;This routine renames the XXXXX.LOG operator log file to
; XXXXX.nnn.
L$NEWL: SKIPN DEBUGW ;DEBUGGING ???
SKIPN BYTPTR ;ANY BYTE POINTER FOR FILE EXTENSIONS ?
$RETF ;NO,,RETURN NOW
NEWL.1: MOVE S1,BYTPTR ;GET THE FILE EXTENSION BYTE PTR
MOVEM S1,EXTPTR ;SAVE IT
AOS S1,EXTCNT ;CREATE A NEW EXTENSION
CAILE S1,^D100 ;CAN'T BE GREATER THEN 100
JRST NEWL.2 ;YES,,TOO MANY LOG FILES !!!
$TEXT (SAVBYT,<^D3R0/S1/^0>) ;GEN THE FILE EXTENSION
MOVEI S1,5 ;GET THE RENAME BLOCK LENGTH
MOVEI S2,FRBBLK ;GET THE RENAME BLOCK ADDRESS
HRLI S2,7 ;Get the byte size
PUSHJ P,F%REN ;RENAME THE OPERATOR LOG FILE
JUMPT .RETT ;WIN,,RETURN
CAXN S1,ERFAE$ ;WAS ERROR 'FILE ALREADY EXISTS' ???
JRST NEWL.1 ;YES,,TRY NEXT FILE
$WTO (<Can't rename file ^F/LOGFD/>,<Current LOG file will be appended>,,<$WTFLG(WT.SJI)>)
$RETF ;NO,,RETURN
NEWL.2: $WTO (<Too many operator LOG files>,<Current LOG file will be appended>,,<$WTFLG(WT.SJI)>)
$RETF ;RETURN
SAVBYT:
TOPS10< SKIPE S1 ;SKIP IF NULL
SUBI S1,40 > ;CONVERT TO SIXBIT ON TOPS10
IDPB S1,EXTPTR ;SAVE THE BYTE
$RETT ;RETURN
SUBTTL L$OPNL Open the log file
;THIS ROUTINE WILL OPEN UP ORIONS LOG FILE TO LOG
;ALL MESSAGES TO AND FROM ORION
L$OPNL:: SKIPE LOGOPN ;IS LOG FILE OPEN
PJRST E$LAO ;LOG FILE ALREADY OPEN
MOVEI S1,FOB.MZ ;SIZE OF FOB WITHOUT IN BEHALF
MOVEI S2,LOGFOB ;ADDRESS OF FILE OPEN BLOCK
$CALL F%AOPN ;OPEN IN APPEND MODE
SKIPT ;MAKE SURE OPENED O.K.
PJRST L$ABORT ;ABORT THE LOG FILE
MOVEM S1,LOGIFN ;SAVE IFN FOR FILE
SETOM LOGOPN ;LOG FILE OPEN FLAG
$CALL L$GSYS ;GET SYSTEM NAME
MOVE S1,LOGIFN ;GET THE IFN
MOVX S2,FI.SIZ ;LOAD FUNCTION CODE
$CALL F%INFO ;GET FILE SIZE
SKIPE S1 ;FILE ALREADY EXIST?
$TEXT (LOGRTN,<^M^L^A>) ;YES - SEPARATE NEW LOG FROM OLD LOG
MOVEI T1,LOGFD ;ASSUME NOT DEBUGGING
SKIPE DEBUGW ;ARE WE?
MOVEI T1,DEBFD ;YES - POINT TO THE DEBUGGING FD
$TEXT (LOGRTN,<
^H/G$NOW/ ORION version ^V/.JBVER/ beginning log file
in ^F/(T1)/ for system ^T/LOGSNM/
>)
PJRST REQCHK ;REQUEST FIRST CHECKPOINT
;AND RETURN
SUBTTL L$ABORT Abort the logfile
;This Routine will abort the Log File processing and continue on
L$ABORT: $CALL .SAVE1 ;SAVE AN AC
SETZ P1,0 ;CLEAR IT
EXCH P1,LOGOPN ;GET THE VALUE AND RESET LOG FILE
SETZM LOGOPN ;CLEAR THE LOG OPEN FLAG
$CALL E$LFE ;LOG FILE ERRORS
$CALL ERRALL## ;GENERATE ERROR AND RETURN
SKIPN P1 ;WAS LOG FILE OPEN
$RETF ;RETURN FALSE
MOVE S1,LOGIFN ;GET THE IFN
$CALL F%REL ;CLOSE THE FILE
JUMPT .RETF ;O.K. JUST RETURN
PJRST L$ABORT ;LOG THIS ERROR ALSO AND RETURN
SUBTTL L$REL Release the logfile
;THIS ROUTINE WILL CLOSE THE LOG
L$REL:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE ERRORS
MOVE S1,LOGIFN ;GET THE LOG FILE IFN
$CALL F%REL ;CLOSE THE FILE
SKIPT ;SKIP IF O.K.
PJRST L$ABORT ;ABORT LOG FILE
SETZM LOGOPN ;LOG FILE CLOSED
$RETT ;RETURN
SUBTTL L$CLOS Close the logfile
;This routine closes the XXX.LOG file and renames it to XXX.nnn and
; Then re-opens the XXX.LOG file to continue logging.
L$CLOS:: $CALL RELPAG## ;RETURN MESSAGE PAGE
SKIPN LOGINT ;LOGGING ENABLED??
PJRST E$LNI## ;LOGGING NOT ENABLED
SKIPN LOGOPN ;IS LOG FILE OPEN
$RETT ;IGNORE IT
PUSHJ P,L$CHKP ;CHECKPOINT THE LOG FILE
PUSHJ P,L$REL ;RELEASE THE OLD LOG FILE
PUSHJ P,L$NEWL ;RENAME THE OLD LOG FILE
SKIPF ;WIN ???
$WTO (<Operator log file ^F/LOGFD/>,< Has been renamed to ^F/BACKUP/>,,<$WTFLG(WT.SJI)>)
PUSHJ P,L$OPNL ;OPEN THE NEW LOG FILE
$RETT ;AND RETURN
L$CHKP::$CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
MOVE S1,LOGIFN ;GET THE IFN
$CALL F%CHKP ;CHECKPOINT THE FILE
JUMPF L$ABORT ;ABORT ON ERROR
REQCHK: MOVX S1,<%CHKTM*^D60*^D1000> ;GET CHECKPOINT INTERVAL
MOVEI S2,L$CHKP ;CALL ME AGAIN
$CALL REQTIM## ;FROM CHKTIM
;FALL INTO COMMON EXIT
SUBTTL L$EXIT Return to the caller
L$EXIT: $RETT ;JUST RETURN
SUBTTL LOGCHK Check the logfile status
;THIS ROUTINE WILL CHECK IF LOGGING IS ENABLED AS WELL AS IF THE LOG
;FILE IS OPEN ALREADY.
LOGCHK: SKIPE LOGINT ;LOGGING ENABLED?
SKIPN LOGOPN ;LOG FILE OPEN
$RETF ;NO..RETURN FALSE
$RETT ;YES..RETURN O.K.
SUBTTL L$CMD Log an operator command
;THIS ROUTINE WILL LOG ALL COMMAND MESSAGES THAT COME FROM A VALID OPR
L$CMD:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE ERRORS
LOAD S1,G$JOB ;GET JOB NUMBER
$CALL GETJBT## ;GET JOB DATA
MOVE S1,G$OPRA ;GET OPER ADDRESS
MOVE S1,OPR.ND(S1) ;NODE ADDRESS
$TEXT (LOGRTN,<^C/G$NOW/ OPRCMD from ^W/JOBNAM/ node ^N/NOD.NM(S1)/ ^I/@JOBTER/>)
MOVE S1,COM.CM(MI) ;GET OFFSET FOR TEXT
ADDI S1,ARG.DA(MI) ;GET ADDRESS OF TEXT
$TEXT (LOGRTN,< =^7/[76]/^T/(S1)/^A>)
PJRST L$EXIT ;GOOD RETURN..
LOGHDR: ITEXT (<^C/G$NOW/ ^W/LOGIDN/ ^I/@JOBTXT/ running ^W/JOBNAM/
>)
SUBTTL L$AOPR Log an OPR signon
;THIS ROUTINE WILL LOG THE SIGNON OF AN OPR
L$AOPR:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
LOAD S1,G$JOB ;GET JOB NUMBER
$CALL GETJBT ;GE JOB INFO
MOVE S1,G$OPRA ;GET OPR ADDRESS
MOVE S2,OPR.ND(S1) ;GET NODE ADDRESS
$TEXT (LOGRTN,<^C/G$NOW/ OPRHEL OPR signon from ^W/JOBNAM/ version ^V/OPH.VN+.OHDRS(MI)/ (PID=^O/G$SND/)
^I/@JOBTXT/ node ^N/NOD.NM(S2)/>)
PJRST L$EXIT ;GOOD RETURN..
SUBTTL L$DOPR Log the deletion of an OPR
;THIS ROUTINE WILL LOG THE DELETION OF AN OPR
L$DOPR:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
MOVE S1,G$OPRA ;GET OPR ADDRESS
MOVE S2,OPR.ND(S1) ;GET NODE ADDRESS
$TEXT (LOGRTN,<^C/G$NOW/ OPRDEL OPR deleted ^I/OPRDAT/>)
PJRST L$EXIT ;GOOD RETURN..
OPRDAT: ITEXT (<at terminal ^O/OPR.TN(S1)/ node ^N/NOD.NM(S2)/ (PID=^O/OPR.PD(S1)/)>)
SUBTTL L$NTFY Log a notify message
;THIS ROUTINE WILL LOG THE NOTIFY MESSAGE
L$NTFY:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
MOVE S1,[SIXBIT/OPRNFY/] ;NOTIFY MESSAGE
MOVEM S1,LOGIDN ;SAVE IDENTIFIER
LOAD S1,G$JOB ;GET JOB NUMBER
$CALL GETJBT ;GET SENDERS INFO
$TEXT (LOGRTN,<^I/LOGHDR/^A>) ;PUT OUT THE HEADER
LOAD S1,.OHDRS+JBI.JB(MI) ;GET JOB NUMBER OF SENDER
$CALL GETJBT ;GET JOB INFO
$TEXT (LOGRTN,< For: ^I/@JOBTXT/
^T/.OHDRS+JBI.SZ+ARG.DA(MI)/>)
PJRST L$EXIT ;CHECKPOINT AND RETURN
SUBTTL L$SHWA Log a standard ACK from QUASAR
;THIS ROUTINE WILL LOG AN ACK FROM QUASAR
L$SHWA:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
SKIPE LOGMOR ;CHECK IF EXPECTING MORE FROM MESSAGE
JRST SHWM.1 ;YES.. PROCESS MESSAGE
$TEXT (LOGRTN,<^C/G$NOW/ OPRSHA ^A>)
PJRST SHWM.1 ;YES..PROCESS THE MESSAGE
SUBTTL L$SHWM Log an OPR display message
L$SHWM:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
SKIPE LOGMOR ;CHECK IF EXPECTING MORE FROM MESSAGE
JRST SHWM.1 ;YES.. JUST PROCESS MESSAGE
$TEXT (LOGRTN,<^C/G$NOW/ OPRSHM ^A>)
SHWM.1: MOVE T1,.OARGC(MO) ;GET ARGUMENT COUNT
MOVEI T2,.OHDRS+ARG.HD(MO) ;ADDRESS OF FIRST ARGUMENT
SHWM.2: LOAD S1,ARG.HD(T2),AR.TYP ;GET THE TYPE FIELD
CAIE S1,.ORDSP ;IS IT DISPLAY
JRST SHWM.4 ;NO CHECK FOR TEXT
$TEXT (LOGRTN,<^M^J ^A>);POSITION DATA
MOVEI S1,ARG.DA+1(T2) ;ADDRESS OF THE TEXT
SHWM.3: $TEXT (LOGRTN,<^T/(S1)/^A>) ;DUMP THE BLOCK
LOAD S2,ARG.HD(T2),AR.LEN ;GET LENGTH OF BLOCK
ADD T2,S2 ;BUMP TO NEXT BLOCK
SOJG T1,SHWM.2 ;GET NEXT BLOCK
SETZM LOGMOR ;CLEAR LOGMOR FLAG
MOVX S1,WT.MOR ;GET THE MORE BIT
TDNE S1,.OFLAG(MO) ;WAS IT SET
SETOM LOGMOR ;YES..SET FLAG
PJRST L$EXIT ;GOOD RETURN..
SHWM.4: CAIE S1,.CMTXT ;WAS IT JUST TEXT
$STOP(IDM,<Invalid Display Message Type ^D/S1/>)
MOVEI S1,ARG.DA(T2) ;ADDRESS OF TEXT
JRST SHWM.3 ;OUTPUT THE TEXT
SUBTTL L$ERR Log a command error message
L$ERR:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
MOVE S1,[SIXBIT/OPRERR/] ;OPR ERROR MESSAGE
HRRZ S2,G$ERR ;GET CODE VALUE
CAIL S2,GOODMS ;GOOD MESSAGE?
MOVE S1,[SIXBIT/OPRMSG/] ;WRITE AS OPR MESSAGE
MOVEM S1,LOGIDN ;SAVE IDENTIFIER
LOAD S1,G$JOB ;GET JOB NUMBER
$CALL GETJBT## ;GET THE JOB DATA
MOVEI S2,NULTXT ;NUL ITEXT BLOCK
ERR.1: SKIPGE S1,G$ERR## ;GET ERROR CODE
JRST ERR.2 ;PROCESS AS ITEXT
$TEXT (LOGRTN,<^I/LOGHDR/^I/(S2)/ --^T/@TXTTBL(S1)/-->)
PJRST L$EXIT ;GOOD RETURN..
ERR.2: $TEXT (LOGRTN,<^I/LOGHDR/^I/(S2)/ --^I/@TXTTBL(S1)/-->)
PJRST L$EXIT ;GOOD RETURN..
L$KMES:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
MOVE S1,[SIXBIT/OPRCMS/] ;GET LINE ID
MOVEM S1,LOGIDN ;SAVE LINE ID
MOVEI S2,[ITEXT(< WTOR code = ^O/.MSCOD(MI)/>
)]
JRST ERR.1 ;PROCESS MESSAGE
SUBTTL L$KMJB Log a kill message for job on LOGOUT
L$KMJB:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
MOVE S1,[SIXBIT/OPRKMJ/] ;KILLED MESSAGE FOR JOB
MOVEM S1,LOGIDN ;SAVE LINE ID
MOVE S1,G$ERR ;GET THE ERROR CODE
$TEXT (LOGRTN,<^C/G$NOW/ ^W/LOGIDN/ ^I/@TXTTBL(S1)/>)
PJRST L$EXIT ;GOOD RETURN..
SUBTTL L$WTO Log a WTO message
L$WTO:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
MOVE S1,[SIXBIT/OPRWTO/] ;WTO TYPE MESSAGE
MOVEM S1,LOGIDN ;SAVE LINE ID
WTOLOG: LOAD S1,G$JOB ;GET JOB NUMBER
$CALL GETJBT## ;GET THE JOB DATA
$TEXT (LOGRTN,<^I/LOGHDR/^T/ARG.DA+.OHDRS+1(MO)/^A>)
PJRST L$EXIT ;GOOD RETURN..
SUBTTL L$WTOR Log a WTOR message
L$WTOR:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
MOVE S1,[SIXBIT/OPRWTR/] ;WTO TYPE MESSAGE
MOVEM S1,LOGIDN ;SAVE LINE ID
LOAD S1,G$JOB ;GET JOB NUMBER
$CALL GETJBT## ;GET THE JOB DATA
$TEXT (LOGRTN,<^I/LOGHDR/ WTOR code = ^O/.MSCOD(MI)/
^T/ARG.DA+.OHDRS+1(MO)/^A>)
PJRST L$EXIT ;GOOD RETURN..
SUBTTL L$ACK Log an ACK message
L$ACK:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
MOVE S1,[SIXBIT/OPRACK/] ;WTO TYPE MESSAGE
MOVEM S1,LOGIDN ;SAVE LINE ID
PJRST WTOLOG ;LOG THE WTO MESSAGE
SUBTTL L$NACK Log a null ACK message
L$NACK:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
LOAD S1,G$JOB ;GET JOB NUMBER
$CALL GETJBT## ;GET THE JOB INFO
MOVE S1,[SIXBIT/OPRACK/] ;WTO TYPE MESSAGE
MOVEM S1,LOGIDN ;SAVE LINE ID
$TEXT (LOGRTN,<^I/LOGHDR/>) ;JUST THE HEADER
PJRST L$EXIT ;GOOD RETURN..
SUBTTL L$LOG Log a LOG message
L$LOG:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
MOVE S1,[SIXBIT/OPRLOG/] ;WTO TYPE MESSAGE
MOVEM S1,LOGIDN ;SAVE LINE ID
PJRST WTOLOG ;LOG THE MESSAGE
SUBTTL LOGRTN Text Output routine for logfile writing
;This routine is called with a character to write in S1
LOGRTN: MOVE S2,S1 ;PUT CHARACTER IN S2
MOVE S1,LOGIFN ;GET THE LOG FILE IFN
$CALL F%OBYT ;OUTPUT THE BYTE
$RETIT ;RETURN IF O.K.
PJRST L$ABORT ;ABORT LOG FILE
SUBTTL L$GSYS Log the system name
TOPS10<
L$GSYS: MOVEI T3,SYSNSZ ;NUMBER OF WORDS IN SYSNAM - 1
MOVS T1,[%CNFG0] ;ADR OF FIRST WORD
GSYS.1: MOVS T2,T1 ;GET THE GETTAB ADR
GETTAB T2, ;GET THE WORD
JFCL ;IGNORE THIS
MOVEM T2,LOGSNM(T1) ;SAVE NAME
CAILE T3,(T1) ;DONE?
AOJA T1,GSYS.1 ;NO, LOOP
> ;END TOPS10
TOPS20<
L$GSYS: MOVX S1,'SYSVER' ;NAME OF GETTAB FOR SYSNAME
SYSGT ;GET IT
HRLZ T1,S2 ;GET TABLE#,,0
MOVEI T2,SYSNSZ ;AND LOAD LOOP COUNTER
GSYS.1: MOVS S1,T1 ;GET N,,TABLE#
GETAB ;GET THE ENTRY
MOVEI S1,0 ;USE ZERO IF LOSING
MOVEM S1,LOGSNM(T1) ;STORE THE RESULT
CAILE T2,(T1) ;DONE ENUF?
AOJA T1,GSYS.1 ;NO, LOOP
>;END TOPS20
GSYS.2: MOVE S1,[POINT 7,LOGSNM] ;SET UP BYTE POINTER
GSYS.3: ILDB T1,S1 ;GET A CHARACTER
CAIE T1,.CHTAB ;A TAB?
CAIN T1," " ;A SPACE?
JRST GSYS.3 ;YES TO EITHER
SKIPA S2,[POINT 7,LOGSNM] ;SET UP STORAGE BYTE POINTER
GSYS.4: ILDB T1,S1 ;GET A CHARACTER
IDPB T1,S2 ;PUT A CHARACTER
JUMPN T1,GSYS.4 ;LOOP UNTIL END OF STRING
POPJ P, ;RETURN
SUBTTL L$SETF Log a setup failure message
L$SETF:: $CALL LOGCHK ;CHECK THE LOG STATUS
JUMPF .RETT ;IGNORE THE ERRORS
MOVE T1,S1 ;ADDRESS OF THE TEXT
MOVE S1,G$OPRA ;GET OPR ADDRESS
MOVE S2,OPR.ND(S1) ;GET NODE ADDRESS
$TEXT (LOGRTN,<^C/G$NOW/ OPRSFL OPR setup failure ^I/OPRDAT/
Reason: ^T/(T1)/>)
PJRST L$EXIT ;GOOD RETURN..
END ;END OPRLOG