Trailing-Edge
-
PDP-10 Archives
-
bb-h138f-bm
-
7-sources/diusch.b36
There are 4 other files named diusch.b36 in the archive. Click here to see a list.
%TITLE 'DIU Request Scheduler'
MODULE DIUSCH ( IDENT = '252',
LANGUAGE(BLISS36),
ENTRY(Sched)
) =
BEGIN
! COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1986.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND
! COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
! THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR
! ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
! AVAILABLE TO ANY OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE
! SOFTWARE IS HEREBY TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
! NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
! EQUIPMENT CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF
! ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
!++
! ABSTRACT:
! This module contains the job scheduler for DIU-20. It selects
! jobs from the DIU queue for processing, and calls the create job
! service to create a job to handle each request. It can be called
! at interrupt level, in response to timer requests, IPCF messages,
! or network topology changes.
!
! ENVIRONMENT:
! User mode, XPORT.
!
! VARIANTS:
! /VARIANT (on TOPS-10) will compile code to support TOPS-10 V7.02
!
! CREATION DATE: 17-Jun-85
!
! AUTHOR: Andrew Nourse
! Adapted from FTSSCH, which was written by Larry Campbell
! HISTORY:
!
! 252 Remove library of CONDIT.
! Sandy Clemens 1-Jul-86
!
! 234 Change library of RMSUSR to RMSINT.
! Gregory A. Scott 17-Jul-86
!
! 174 Remove library TOPS20.
! Gregory A. Scott 20-May-86
!
! 167 Remove external for s$node_check since it is not used here.
! Gregory A. Scott 19-May-86
!
! 154 Rename start_job to j$start and kill_job to j$kill. We were calling
! lj$event and lj$uevent when we meant l$event and l$uevent.
! Gregory A. Scott 12-May-86
!
! 152 The routine that tried to expire requests whose deadlines had passed
! did a rather incomplete job. Same way with the timeout routine. So,
! now we do it the same way that ipc_delete does.
! Gregory A. Scott 11-May-86
!
! 126 Change module name to DIUSCH for DDT and GLOB. DO_SCHED is a NOVALUE
! routine, so why should it return a value. S$TIMINT always takes the
! channel from t_channel on the -20, so now it only takes one argument
! which is the time to wake up.
! Gregory A. Scott 26-Apr-86
!
! 40 Put the REQUIRE/LIBRARY of 'TOPS20' into a TOPS-20 only
! conditional.
! Sandy Clemens 7-Oct-85
!
! 02 - Change the interrupt code for TOPS-10 [Doug Rayner, 25-Jul-85]
! 01 - Initial version of DIUSCH, extracted from FTSSCH
!--
!************************************************************************
! L I B R A R I E S
!************************************************************************
LIBRARY 'BLI:XPORT'; ! XPORT of course
LIBRARY 'FAO'; ! FAO services
LIBRARY 'RMSINT'; ! RMS services
LIBRARY 'DIU'; ! DIU Data Structures
!
! TABLE OF CONTENTS:
!
FORWARD ROUTINE
sched : NOVALUE, ! Schedule a request
do_sched : NOVALUE, ! The actual work routine
expire : NOVALUE, ! Stomp on an expired request
timeout : NOVALUE, ! Requeue a timed-out request
abort_sched; ! Condition handler for scheduler
!
! EQUATED SYMBOLS:
!
LITERAL
bignum =
%BLISS16 (%O'177777')
%BLISS32 (%X'FFFFFFFF')
%BLISS36 (%O'377777777777'); ! Largest positive integer
LITERAL
timeout_interval =
%IF %SWITCHES (TOPS20)
%THEN
(5 * 60 / 3); ! 5 minute timeout
%ELSE
(%O'1000000' / (24 * 60)) * 5; ! Five minute timeout checks
%FI
LITERAL
short_sleep =
(%O'1000000' / (24 * 60)) * 10; ![10] Ten minute sleep if PMR
LITERAL
long_sleep = (%O'1000000' / (24 * 60)) * 20; ! Twenty minute sleep
!
! OWN STORAGE:
!
OWN
ssleep : INITIAL (short_sleep), ! [5] Make sleep intervals
lsleep : INITIAL (long_sleep); ! patchable
OWN TIMOUT : INITIAL(timeout_interval); ![7] 5 minute timeout **PATCHABLE**
OWN SCHTIM: INITIAL(0); ![7] Time of last scheduler pass
GLOBAL
mjob : INITIAL (4), ! Max jobs running concurrently
njob; ! Number of current jobs
OWN
next_event_time; ! Earliest /AFTER to expire next
%IF %SWITCHES (TOPS10) %THEN
%IF %VARIANT ! TOPS-10 V7.02 support
%THEN
OWN
query_pid : INITIAL(0); ! Pid to use to query SYSTEM[INFO]
%FI
%FI
!
! EXTERNAL REFERENCES:
!
EXTERNAL
jobstatus : BLOCKVECTOR [DIU$K_MAX_MJOB, DIUJ$K_LEN]
FIELD (DIUJ$$JOBSTAT_FIELDS),
shutdown, ! Spooler shut down
mst_flag : VOLATILE; ! We are the master job
EXTERNAL ROUTINE
s$strchk, ! Check to see if structure online
q$find, ! Find a request in the queue
q$delete, ! Delete a request
q$reque, ! Requeue a request
q$modify, ! Modify a request
j$start : NOVALUE, ! Start a request
j$kill, ! Kill an active job
l$event : NOVALUE, ! Log an event to system log file
l$uevent : NOVALUE, ! Log an event to user log file
abort : NOVALUE, ! Abort dependents of dying request
notify : NOVALUE, ! Notify owner of request disposition
q$req_block_init : NOVALUE, ! Init a request block
q$release_chain : NOVALUE, ! Release chain of request blocks
diu$abort : NOVALUE, ! Condition handler
s$noint : NOVALUE, ! Disable interrupts
s$okint : NOVALUE, ! Reenable interrupts
s$time, ! Return current time of day
s$jobtime, ! get runtime for job
s$timint; ! Post timer interrupt
%IF %SWITCHES (TOPS10) %THEN
%IF %VARIANT ! TOPS-10 V7.02 support
%THEN
EXTERNAL ROUTINE
ip$check_pid; ! Check to see if a PID is still valid
%FI
%FI
GLOBAL ROUTINE sched : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
! The job scheduler for DIU. This routine can be called at command
! level (START, for example) or at interrupt level (on receipt of a new
! request). Because we can be called at interrupt level we ENABLE
! the default condition handler here to catch errors so we DEBRK properly.
!
! FORMAL PARAMETERS:
! NONE
!
! IMPLICIT INPUTS:
! NONE
!
! IMPLICIT OUTPUTS:
! NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
! NONE
!
! SIDE EFFECTS:
! NONE
!
!--
BEGIN
ENABLE
diu$abort;
IF NOT .mst_flag
THEN
RETURN (DIU$_NO_SPOOLER);
IF .shutdown
THEN
RETURN (DIU$_SHUTDOWN);
IF .njob GEQ .mjob
THEN
RETURN (DIU$_MJOB_EXCEEDED);
do_sched (); ! Call the work routine
END; ! End of sched
ROUTINE do_sched : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
! Schedule a request. If MJOB is not full yet (slots are available),
! the queue is searched for eligible requests. For each one found,
! a job is created and logged in and the request initiated. We establish
! a condition handler here in order to free up any memory we may have
! allocated in the event of errors.
!--
BEGIN
LOCAL
retcode,
req_id,
chain_head : VOLATILE,
chain_copy, ! Hold copy of chain head
current_block,
req_block : $DIU_BLOCK,
now, ! current time
check_for_hung_requests; ! nonzero if time to look for hung jobs
ENABLE
abort_sched (chain_head);
!
! Disable interrupts to prevent confusion
!
s$noint ();
now=S$TIME(); ! what time is it?
IF .SCHTIM EQL 0 ! If first time here,
THEN SCHTIM = .now; ! do not check timeout
IF (check_for_hung_requests=(.now-.SCHTIM) GTR .TIMOUT) ! time to look?
THEN SCHTIM=.now; ! yes remember this time
! Must do pass even if MJOB exceeded,
! to expire deadlined & timed-out jobs
! Just return immediately if we're full.
!
!
! Get a list of all requests in the queue.
!
q$req_block_init (req_block);
q$find (req_block, chain_head);
current_block = chain_head;
chain_copy = .chain_head; ! Make copy of chain head
! so we can remember if queue empty
!
! Set artificial value (largest positive number) for earliest /AFTER
!
next_event_time = bignum;
!
! Now chase the chain of request blocks, picking and starting eligible ones
!
WHILE ((current_block = ..current_block) NEQ 0)
DO
BEGIN
BIND
req_block = .current_block + 1 : $DIU_BLOCK;
!
! If deadline expired, kill the request and don't make any other tests
!
IF .req_block[DIU$G_DEADLINE] NEQ 0
AND .req_block[DIU$G_DEADLINE] LEQ s$time ()
THEN
expire (req_block)
ELSE
BEGIN
!
! Deadline is not expired... keep checking...
!
IF (.check_for_hung_requests neq 0) ! If time to check
AND .req_block[DIU$V_ACTIVE] ! If request is active
THEN ! see if it timed out
BEGIN !
LOCAL jobtime; ! runtime now
LOCAL oldjobtime: INITIAL(0); ! runtime on last pass
LOCAL jobnum; ! job number
LOCAL reqid; ! job number
LOCAL index: INITIAL(0); ! index in JOBSTATUS
!
reqid=.req_block[DIU$H_REQUEST_ID]; !
DO BEGIN !
IF (.JOBSTATUS[.index,DIUJ$H_REQUEST_ID] EQL .reqid) !
AND .JOBSTATUS[.index,DIUJ$V_INUSE] !
THEN EXITLOOP !
ELSE index=.index+1; !
END WHILE .index LSS DIU$K_MAX_MJOB; !
IF .index EQL DIU$K_MAX_MJOB ! Can't find request! OOPS !
THEN SIGNAL(DIU$_BUG,DIU$_REQ_NOT_FOUND); !
jobnum=.JOBSTATUS[.index,DIUJ$H_JOB_NUMBER];
%IF %SWITCHES (TOPS20)
%THEN ! TOPS-20 ONLY
jobtime=s$jobtime(.jobnum); ! get current runtime
oldjobtime=.JOBSTATUS[.index,DIUJ$G_JOB_RUNTIME];
JOBSTATUS[.index,DIUJ$G_JOB_RUNTIME]=.jobtime;
IF (.jobtime EQL .oldjobtime) ! If it used NO time,
THEN timeout(req_block) ! time it out
%ELSE ! TOPS-10 ONLY
IF .jobnum LSS 0
THEN
IF .jobnum EQL -1
THEN
JOBSTATUS[.index,DIUJ$H_JOB_NUMBER] = -2
! Remember seen this pass. Timeout next pass if
! still not started.
ELSE
timeout(req_block) ! Long overdue to start
ELSE
BEGIN
%IF %VARIANT ! TOPS-10 V7.02 support
%THEN
IF .JOBSTATUS[.index,DIUJ$V_PID_INVALID]
THEN
timeout(req_block) ! Second time around so timeout
ELSE
IF NOT ip$check_pid(query_pid,
.JOBSTATUS[.index, DIUJ$G_SLAVE_PID])
THEN
JOBSTATUS[.index,DIUJ$V_PID_INVALID] = 1
! If the PID is not valid anymore,
! mark to timeout next pass
ELSE
%FI
BEGIN
jobtime=s$jobtime(.jobnum); ! get current runtime
oldjobtime=.JOBSTATUS[.index,DIUJ$G_JOB_RUNTIME];
JOBSTATUS[.index,DIUJ$G_JOB_RUNTIME]=.jobtime;
IF (.jobtime EQL .oldjobtime) ! If it used NO time,
THEN timeout(req_block) ! time it out
END;
END;
%FI ! END OF TOPS-10 / TOPS-20 CONDITIONAL
END;
! Check /AFTER switch, holding bit,
! active bit, and dependency
IF (.req_block[DIU$G_AFTER] LEQ .now) ! use remembered time
AND (NOT .req_block[DIU$V_HOLDING])
AND (NOT .req_block[DIU$V_ACTIVE])
AND (.req_block[DIU$H_PREREQUISITE_ID] EQL 0)
AND (.njob lss .mjob) ! check mjob here
THEN
!
! Request passes all tests, start it up
!
j$start (req_block)
ELSE
!
! Keep track of earliest unexpired /AFTER time
!
IF .req_block[DIU$G_AFTER] NEQ 0
AND .req_block[DIU$G_AFTER] GTR .now ! use remembered
THEN
next_event_time = MIN (.next_event_time,
.req_block[DIU$G_AFTER]);
!
! If this request has a deadline, consider it for next event...
!
IF .req_block[DIU$G_DEADLINE] NEQ 0
THEN
next_event_time = MIN (.next_event_time,
.req_block[DIU$G_DEADLINE]);
END;
END; ! Loop
q$release_chain (.chain_head);
chain_head = 0;
!+
! Post a timer interrupt for now plus a couple of minutes.
!-
IF .next_event_time NEQ 0
THEN
next_event_time = MIN (.now + .ssleep, ! use remembered time
.next_event_time)
ELSE
next_event_time = .now + .ssleep; ! use remembered time
!+
! If we have an event to wake up on, post a timer interrupt for it
!-
IF .chain_copy neq 0 ! If Q empty, sleep forever
THEN
BEGIN
IF .next_event_time NEQ 0
AND .next_event_time NEQ bignum
THEN s$timint (.next_event_time) ! Wake for next request
ELSE s$timint (.now+.lsleep); ! wake occasionally
END;
s$okint(); ! Reenable interrupts
END; ! End of do_sched
ROUTINE expire (p_req_block) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!
! Stomp on an expired request (/DEADLINE passed)
!
! FORMAL PARAMETERS:
!
! p_req_block: pointer to request block
!
! SIDE EFFECTS:
!
! The request is deleted from the queue and the user notified if desired.
! Any requests dependent on the expired request are killed if queued with
! /SEQUENCE:ABORT. Requests depending on this one have their dependencys
! removed. A line is written to the user and system log files.
!
!--
BEGIN
LOCAL job_handle,
log_descr : $STR_DESCRIPTOR(CLASS=DYNAMIC);
BIND req_block = .p_req_block : $DIU_BLOCK;
! Make a supplementary message up for passing along
$STR_DESC_INIT(DESC = log_descr, CLASS = DYNAMIC);
$STR_COPY(TARGET = log_descr,
STRING = $STR_CONCAT ('Request ',
$STR_ASCII (.req_block[DIU$H_REQUEST_ID]),
' (',
(.req_block[DIU$H_JOBNAME],
CH$PTR(req_block[DIU$T_JOBNAME])),
') killed, deadline expired'));
! If request is active, stomp on the corresponding slave job (dependent jobs
! will be killed by slave job cleanup code). If not active, must kill
! dependents now.
job_handle = -1; ! Set job_handle to "not found"
IF .req_block[DIU$V_ACTIVE] ! If the job was active, kill it
THEN job_handle = j$kill (.req_block[DIU$H_REQUEST_ID],
DIU$_DEADLINE_EXPIRED);
IF .job_handle NEQ -1
THEN BEGIN ! If the job was active and we found it
jobstatus[.job_handle, DIUJ$V_ALREADY_DELETED] = 1;
$STR_COPY (TARGET = jobstatus[.job_handle, DIUJ$T_EXTRA_TEXT],
STRING = log_descr);
END
ELSE BEGIN ! The job wasn't active
l$event(DIU$_DEADLINE_EXPIRED, 0, log_descr);
l$uevent(DIU$_DEADLINE_EXPIRED, 0, log_descr, .req_block);
notify (DIU$_DEADLINE_EXPIRED, 0, log_descr, .req_block);
IF .req_block[DIU$H_DEPENDENT_ID] NEQ 0
THEN abort (.req_block[DIU$H_DEPENDENT_ID]);
END;
! Clear any prerequisiste request's dependency on this request, I know this is
! rather obscure but it should work
IF .req_block[DIU$H_PREREQUISITE_ID] NEQ 0 ! If request has prerequisite
THEN Q$MODIFY (.req_block[DIU$H_PREREQUISITE_ID], ! Zap it
DIUQ$K_DEPENDENT_ID,
0);
! Delete the request block from the queue.
q$delete (.req_block[DIU$H_REQUEST_ID]);
END; ! end of expire
ROUTINE timeout (p_req_block) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!
! Requeue on a timed-out request
!
! FORMAL PARAMETERS:
!
! p_req_block: pointer to request block
!
!
! SIDE EFFECTS:
!
! The request is requeued, events written to user and system log file
!--
BEGIN
LOCAL job_handle,
log_descr : $STR_DESCRIPTOR(CLASS=DYNAMIC);
BIND req_block = .p_req_block : $DIU_BLOCK;
$STR_DESC_INIT(DESC = log_descr, CLASS = DYNAMIC);
$STR_COPY(TARGET = log_descr,
STRING = $STR_CONCAT ('Request ',
$STR_ASCII (.req_block[DIU$H_REQUEST_ID]),
' (',
(.req_block[DIU$H_JOBNAME],
CH$PTR(req_block[DIU$T_JOBNAME])),
') requeued due to time out'));
! If request is active, stomp on the corresponding slave job.
job_handle = -1; ! Set job_handle to "not found"
IF .req_block[DIU$V_ACTIVE] ! If the job was active, kill it
THEN job_handle = j$kill (.req_block[DIU$H_REQUEST_ID],
DIU$_REQ_TIME_OUT);
IF .job_handle NEQ -1
THEN BEGIN ! If the job was active and we found it
$STR_COPY (TARGET = jobstatus[.job_handle, DIUJ$T_EXTRA_TEXT],
STRING = log_descr);
END
ELSE BEGIN ! The job wasn't active
l$event(DIU$_REQ_TIME_OUT, 0, log_descr);
l$uevent(DIU$_REQ_TIME_OUT, 0, log_descr, .req_block);
END;
! Requeue the request
q$reque (.req_block[DIU$H_REQUEST_ID]);
END; ! End of timeout
ROUTINE abort_sched (sig, mech, enbl) =
!++
! FUNCTIONAL DESCRIPTION:
! Condition handler for scheduler. This routine releases
! the chain of (one) request blocks and then resignals.
! We also try to reenable interrupts (all since all signals
! in DO_SCHED occur NOINT, we always OKINT here).
!
! FORMAL PARAMETERS:
! sig - signal vector
! mech - mechanism vector
! enbl - enable vector (element 1 is head of chain)
!
! IMPLICIT INPUTS:
! NONE
!
! IMPLICIT OUTPUTS:
! NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
! 0 - to force resignalling
!
! SIDE EFFECTS:
! NONE
!
!--
BEGIN
MAP
sig : REF VECTOR,
mech : REF VECTOR,
enbl : REF VECTOR;
ENABLE ! Prevent nested signals here
diu$abort;
IF .sig[1] EQL STS$K_UNWIND
THEN
RETURN (0);
IF ..enbl[1] NEQ 0
AND NOT .sig[1] ! Only release memory on errors
THEN
BEGIN
q$release_chain (..enbl[1]);
.enbl[1] = 0; ! Empty chain
s$okint (); ! Reenable interrupts
END;
RETURN (0) ! Resignal
END; ! End of abort_sched
END ! End of module
ELUDOM