Trailing-Edge
-
PDP-10 Archives
-
bb-h138f-bm
-
7-sources/keydefkey.bli
There are 10 other files named keydefkey.bli in the archive. Click here to see a list.
%TITLE 'KEYDEFKEY - interactive define key'
MODULE KEYDEFKEY ( ! Interactive define key
IDENT = '3-002' ! File: KEYDEFKEY.BLI Edit: GB3002
) =
BEGIN
!COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1981, 1988. ALL RIGHTS RESERVED.
!
!THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED ONLY
!IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE INCLUSION OF
!THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER COPIES THEREOF MAY
!NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE
!TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
!
!THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE AND
!SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT CORPORATION.
!
!DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
!SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
!
!++
! FACILITY: EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
! Interactive define key
!
! ENVIRONMENT: Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: April 7, 1979
!
! MODIFIED BY:
!
! 1-001 - Original. DJS 24-Feb-1981. This module was created by
! extracting routine EDT$$LN_DEFK from module KEYTRAN.
! 1-002 - Regularize headers. JBS 09-Mar-1981
! 1-003 - Use new message codes. JBS 04-Aug-1981
! 1-004 - Add return values. JBS 02-Oct-1981
! 1-005 - Revise call to enable autorepeat. JBS 30-Jan-1982
! 1-006 - Make CR a valid part of the key definition. SMB 17-Feb-1982
! 1-007 - Make DEFK illegal in NOKEYPAD mode - used only for defining
! keys in KEYPAD mode. SMB 1-Mar-1982
! 1-008 - Fix routine header. JBS 22-Apr-1982
! 1-009 - EDT$$DEFK returns a status. JBS 18-May-1982
! 1-010 - Set a flag if control C actually aborts something. JBS 24-May-1982
! 1-011 - Return true success from EDT$$NXT_CMDCH. STS 16-Jun-1982
! 1-012 - Pass flag to EDT$$NXT_CMDCH to indicate whether or not we wish
! to accept repeat counts. STS 16-Jun-1982
! 1-013 - Modify message processing. SMB 22-Jun-1982
! 1-014 - New implementation of defined keys. JBS 13-Aug-1982
! 1-015 - Change cursor positioning call to obsolete a module. JBS 05-Oct-1982
! 1-016 - Worry about having no cursor position to return to. This can happen
! if this command is typed ahead initially. JBS 22-Feb-198I
! 3-001 - Fix string pointers. GB 25-Apr-1983
! 3-002 - Add updates from V3 sources. GB 29-Apr-1983
!--
%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!
REQUIRE 'EDTSRC:TRAROUNAM';
FORWARD ROUTINE
EDT$$LN_DEFK; ! Interactive "define key"
!
! INCLUDE FILES:
!
REQUIRE 'EDTSRC:EDTREQ';
LIBRARY 'EDTSRC:KEYPADDEF';
!
! MACROS:
!
! NONE
!
! EQUATED SYMBOLS:
!
! NONE
!
! OWN STORAGE:
!
! NONE
!
! EXTERNAL REFERENCES:
!
! In the routine
%SBTTL 'EDT$$LN_DEFK - interactive define key'
GLOBAL ROUTINE EDT$$LN_DEFK ! Interactive define key
=
!++
! FUNCTIONAL DESCRIPTION:
!
! This routine is called when the change mode command DEFK is processed
! to process the interactive define key command. The user is prompted
! for the key to be defined and the defining string.
!
! FORMAL PARAMETERS:
!
! NONE
!
! IMPLICIT INPUTS:
!
! CMD_BUF
! CS_LNO
! CUR_COL
! KPAD
!
! IMPLICIT OUTPUTS:
!
! CMD_PTR
! CMD_END
! CC_DONE
!
! ROUTINE VALUE:
!
! 1 = ok, 2 = end of journal file, 0 = fail or control C
!
! SIDE EFFECTS:
!
! May define a key, or undefine a key.
!
!--
BEGIN
EXTERNAL ROUTINE
EDT$$STOP_WKINGMSG,
EDT$$CHK_CC,
EDT$$SC_POSCSIF : NOVALUE,
EDT$$ERA_MSGLN,
EDT$$MSG_BELL,
EDT$$OUT_MSG,
EDT$$TST_BADK,
EDT$$DEFK,
EDT$$CAN_KDEF,
EDT$$NXT_CMDCH, ! Get the next command character
EDT$$TRN_KSTR, ! Build the command buffer
EDT$$PUT_CMDCH : NOVALUE, ! Put a character in the command buffer
EDT$$SC_NONREVID,
EDT$$TI_ENBLAUTREP, ! Enable or disable autorepeat
EDT$$TI_DELK;
EXTERNAL
MSGFLG, ! Message flag
MESSAGE_LINE, ! Line on which to print prompts
KPAD, ! Are we in KEY or NOKEY mode
CMD_BUF, ! Command buffer
CMD_PTR, ! Pointer to next char in command buffer
CMD_END, ! Pointer to end of info in command buffer
CS_LNO, ! Line on which the cursor is positioned
CUR_COL, ! Column on which the cursor is positioned.
CC_DONE; ! Set to 1 if control C actualls aborts something
MESSAGES ((PRSKEYDEF, KEYNOTDEF, NOWENTDEF, BADDEFK));
LOCAL
KEY_ADDR,
KEY : INITIAL (K_KEY_MAX + 1), ! Initialize to an illegal value
CON_U,
C,
SUCCEED,
STATUS;
!+
! Since this command uses the bottom two lines for prompting and echoing,
! we don't want the Working message to continue printing.
!-
EDT$$STOP_WKINGMSG ();
!+
! The interactive define key facility only works in keypad mode.
!-
IF ( NOT .KPAD)
THEN
BEGIN
EDT$$MSG_BELL (EDT$_BADDEFK);
CMD_END = CH$PTR (CMD_BUF,, BYTE_SIZE);
RETURN (0)
END;
SUCCEED = 1;
!+
! Set up the buffer for the definition to go into
!-
CMD_PTR = CH$PTR (CMD_BUF,, BYTE_SIZE);
CMD_END = CH$PTR (CMD_BUF, 256, BYTE_SIZE);
!+
! Prompt for the key.
!-
EDT$$OUT_MSG (.MESSAGE_LINE, EDT$_PRSKEYDEF, 0, 0);
SUCCEED = EDT$$NXT_CMDCH (KEY, 0); ! zero means no repeat counts allowed
IF (.SUCCEED NEQ 1) THEN RETURN (.SUCCEED);
!+
! Check for the validity of the key.
!-
IF EDT$$TST_BADK (.KEY)
THEN
BEGIN
!+
! Bad key. Put out a message and return.
!-
EDT$$MSG_BELL (EDT$_KEYNOTDEF);
CMD_END = CH$PTR (CMD_BUF,, BYTE_SIZE);
RETURN (0);
END;
!+
! Now prompt for the definition.
!-
EDT$$OUT_MSG (.MESSAGE_LINE, EDT$_NOWENTDEF, 0, 0);
!+
! Loop, reading characters until we see the enter key. Keypad keys
! and gold/letter are translated, delete and CTRL/U have the usual
! meanings and all other characters are inserted directly.
!-
CON_U = 0; ! Note whether CONTROL U entered
WHILE 1 DO
BEGIN
SUCCEED = EDT$$NXT_CMDCH (C, 1);
IF (.SUCCEED NEQ 1) THEN RETURN (2);
IF EDT$$CHK_CC ()
THEN
BEGIN
CMD_END = CH$PTR (CMD_BUF,, BYTE_SIZE);
CC_DONE = 1;
RETURN (0);
END;
SELECTONE .C OF
SET
[K_ENTER] :
EXITLOOP;
[K_KPAD_BASE to K_KEY_MAX] :
BEGIN
!+
! Keypad or gold key, place the translation in the buffer.
!-
SUCCEED = EDT$$TRN_KSTR (.C, 0, 1);
IF (.SUCCEED EQL 2) THEN RETURN (2);
CMD_END = CH$PTR (CMD_BUF, 256, BYTE_SIZE);
END;
[ASC_K_DEL] :
BEGIN
!+
! Delete key. Delete the previous character unless we are at
! the beginning.
!-
IF CH$PTR_GTR (.CMD_PTR, CH$PTR (CMD_BUF,, BYTE_SIZE))
THEN
BEGIN
CMD_PTR = CH$PLUS (.CMD_PTR, -1);
EDT$$TI_DELK (CH$RCHAR (.CMD_PTR));
END;
END;
[ASC_K_CTRL_U] :
BEGIN
!+
! CTRL/U: abort the define key command.
!-
CON_U = 1;
CMD_PTR = CH$PTR (CMD_BUF,, BYTE_SIZE);
EXITLOOP;
END;
[OTHERWISE] :
!+
! None of the above: must be a character (other than DEL or CTRL/U) from
! the main keyboard. Insert it in the definition.
!-
EDT$$PUT_CMDCH (.C, 1);
TES;
!+
! Turn on autorepeat, since seeing a keypad key will have turned
! it off.
!-
EDT$$TI_ENBLAUTREP (1);
END;
!+
! Now define the key.
!-
IF CH$PTR_NEQ (.CMD_PTR, CH$PTR (CMD_BUF,, BYTE_SIZE))
THEN
BEGIN
STATUS = EDT$$DEFK (.KEY, CH$PTR (CMD_BUF,, BYTE_SIZE),
CH$DIFF (.CMD_PTR, CH$PTR (CMD_BUF,, BYTE_SIZE)));
IF ( NOT .STATUS) THEN SUCCEED = 0;
END
ELSE
BEGIN
!+
! Clear the definition of a key defined as the null string,
! except do nothing if the definition was terminated by a CTRL/U.
!-
IF (.CON_U EQL 0)
THEN
BEGIN
STATUS = EDT$$CAN_KDEF (.KEY);
IF ( NOT .STATUS) THEN SUCCEED = 0;
END;
END;
!+
! Reset the buffer pointer, erase the command line and reposition the cursor
! before continuing.
!-
CMD_PTR = CH$PTR (CMD_BUF,, BYTE_SIZE);
CMD_END = CH$PTR (CMD_BUF,, BYTE_SIZE);
MSGFLG = 1;
EDT$$ERA_MSGLN ();
IF (.CS_LNO GEQ 0) THEN EDT$$SC_POSCSIF (.CS_LNO, .CUR_COL);
EDT$$SC_NONREVID ();
!+
! If we had an error print an appropriate message.
!-
IF (.SUCCEED EQL 0) THEN EDT$$MSG_BELL (.STATUS);
RETURN (.SUCCEED);
END; ! of routine EDT$$LN_DEFKEY
END
ELUDOM