Trailing-Edge
-
PDP-10 Archives
-
bb-kl11i-bm_tops20_v7_0_atpch_1-22
-
autopatch/batmac.x20
There is 1 other file named batmac.x20 in the archive. Click here to see a list.
UNIVER BATMAC ;PARAMETER FILE FOR BATCON
SUBTTL Preliminaries
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1975, 1988.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
; ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
; INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
; COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
; OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
; TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
SEARCH GLXMAC ;CHECK GALAXY LIBRARY
SEARCH QSRMAC ;CHECK QUASARS LIBRARY
PROLOG(BATMAC) ;GENERATE THE NECESSARY SYMBOLS
IFN FTUUOS,<
IF1,<PRINTX BUILDING A GALAXY-10 BATMAC>
SEARCH UUOSYM>
IFN FTJSYS,<
IF1,<PRINTX BUILDING A GALAXY-20 BATMAC>
SEARCH MONSYM>
BMCMAN==:42
BMCDEV==:41
VERSIN(BMC)
BMCWHO==0
BMCVER==6
BMCMIN==0
Subttl Table of Contents
; Table of Contents for BATMAC
;
; Section Page
;
;
; 1. Revision . . . . . . . . . . . . . . . . . . . . . . . 3
; 2. Assembly Parameters (Define the Options) . . . . . . . 4
; 3. Other Definitions (Bits, AC's, Macros, etc...) . . . . 6
; 4. Data Base for Each Batch Stream . . . . . . . . . . . 11
; 5. INTERRUPT DATA BASE FLAGS . . . . . . . . . . . . . . 14
; 6. MSGBLD - BUILD ERROR MESSAGE TABLE . . . . . . . . . . 15
SUBTTL Revision
COMMENT \
***** Release 4.2 -- begin maintenance edits *****
EDIT 1 3-Mar-85
Add output counter OUTCNT.
GCO 4.2.1609 4.2 edit 4217
***** Release 5.0 -- begin development edits *****
EDIT 10 5.1073 26-Jan-84
Move to new development area. Add version vector. Update
TOC. Change version number to 5
***** Release 5.0 -- begin maintenance edits *****
20 Increment maintenance edit level for version 5 of GALAXY.
21 5.1225 15-Oct-85
Define a new bit FL.ZXC which indicates if a CR, LF or FF was
once a generated control character. Used in "=" processing.
22 5.1241 11-Jun-86
Define a new bit FR.RER and data base word .JCRER for use in
conjunction with the new reserved label %RERR::
23 5.1244 7-Dec-86
Increase the batch stream stack size (.JPSIZ) from 100 to 200 words.
***** Release 6.0 -- begin development edits *****
40 6.1037 26-Oct-87
Move sources from G5: to G6:
41 6.1225 8-Mar-88
Update copyright notice.
42 6.1263 20-Jun-88
Define FP for LOG error file
\ ;End of Revision History
SUBTTL Assembly Parameters (Define the Options)
SYSPRM FILEMK,<0,,777>,RHMASK ;MASK FOR FILE MAPPING
DEFINE PARMS<
;;TYPE 1 OPTIONS - DEFINE STATIC PARAMETERS
X PTYBFR,1 ;;NUMBER OF PTY BUFFERS IN THE RING
;;TYPE 3 OPTIONS - DEFINE OTHER PARAMETERS
X REQTIM,5 ;;Number of minutes for requeueing
X TPSIZE,100 ;;SIZE OF THE TOP LEVEL PUSH DOWN LIST
;**;[23]At .JPSIZ,100 change 1 line JCR 12/7/86
X .JPSIZ,200 ;;[23]Size of the stack for each subjob
X %EXTRA,^D10 ;;PERCENTAGE OF EXTRA TIME GIVEN TO A JOB
>
DEFINE X(A,B)<IFNDEF A,<A==B>> ;;DEFINE THE SYMBOL IF NOT ALREADY DEFINED
PARMS ;EXPAND THE ASSEMBLY PARAMETERS
; -10 Job maximum is dependent on new FILOP otherwise max should be 5.
; -10 maximum is 15 till PTY uses new FILOP.
SYSPRM DEFMJB,^D15,^D9 ;JOB MAX ON EITHER SYSTEM
SYSPRM MONCHR,".","@" ;MONITOR PROMPT CHARACTER
;USED AS FIRST CHARACTER OF INPUT LINE TO
;DIRECT LINE TO THE MONITOR
SYSPRM OPRPST,<ASCIZ /B/>,<ASCIZ /B-/> ;OPR PROMPT STRING
;CONSISTENCY CHECK FOR ASSEMBLY PARAMETERS
IFLE DEFMJB,<
PRINTX DEFMJB.LT.1, 1 ASSUMED
DEFMJB==1>
IFN FTJSYS,<
IFG <DEFMJB-^D9>,<
PRINTX DEFMJB GREATER THAN 9 ON -20 ..9 ASSUMED
DEFMJB==^D9
>>;END FTJSYS
IFN FTUUOS,<
IFG <DEFMJB-^D15>,<
PRINTX DEFMJB GREATER THAN 15 ON -10 ..15 ASSUMED
DEFMJB==^D15
>>;END FTUUOS
IFLE PTYBFR,<
PRINTX PTYBFR.LT.1, 1 ASSUMED
PTYBFR==1>
IFL <%EXTRA-^D10>!<^D100-%EXTRA>,<
PRINTX BAD VALUE FOR THE PERCENTAGE OF EXTRA TIME, 10% ASSUMED
%EXTRA==^D10>
SUBTTL Other Definitions (Bits, AC's, Macros, etc...)
;ACCUMULATOR DEFINITIONS (MUST BE IN THE ORDER DISTRIBUTED)
;THESE DEFINITIONS PARALLEL QUASAR-10 DEFINITIONS
;AC BLOCK 0-13 IS SAVED FOR EACH STREAM IN .JREGS(R)
;AC 17 IS ALSO SAVED
IO1==7 ;REGISTERS USED BY THE I/O HANDLER
IO2==10
F==11 ;ONE OF THE FLAG WORDS FOR THE STREAM (AC R IS THE OTHER)
J==12 ;JOBSTS FOR THE STREAM
CH==13 ;RANDOM CHARACTER HOLDER (QUASAR AC 'AP')
;END OF SAVED AC'S FOR EACH STREAM
G==14 ;GLOBAL BATCON FLAGS
S==15 ;STREAM INDEX
R==16 ;RELOCATION FOR THE STREAM (LH ARE STREAM FLAGS)
P==17 ;PUSH DOWN LIST POINTER
;IS USED FOR BOTH TOP LEVEL PDL
;AND INDIVIDUAL STREAM LISTS
FULLCT==4 ;COUNT OF FULL RETRIES
PTYNCH==6 ;NUMBER OF INTERRUPT CHANNEL GROUPS
INT.PI==0 ;INTERRUPT LEVEL 0
INT.P1==1 ;INTERRUPT LEVEL 1
INT.P3==3 ;INTERRUPT LEVEL 3
;DEFINE SOME CONSTANTS AFTER CONSISTENCY CHECKS (PS. DON'T EVER CHANGE THESE)
; DO NOT CHANGE THE NUMBER OF WORDS SINCE IT WILL CAUSE PROBLEMS
; ON THE -20 IF SIZE IS TOO BIG.
SYSPRM PTYBLK,^D30,23 ;30. ON -10 23 ON -20
;FLAGS SETTINGS FOR BATCH STREAMS
;AC R (LH FLAGS ONLY)
RL.ACT==400000 ;STREAM IS ACTIVE (MUST BE THE SIGN BIT)
RL.MES==200000 ;OPERATOR MESSAGE LIST SETUP...
RL.JNA==100000 ;JOB NUMBER IS EVER ASSIGNED
RL.OPR==040000 ;WAITING FOR OPERATOR RESPONSE
RL.JIE==020000 ;JOB IS IN ERROR STATE
RL.FCI==010000 ;FIRST CHARACTER OF INPUT FROM CTL FILE
RL.KJB==004000 ;AUTO KJOB LINE HAS BEEN SENT
RL.IGN==002000 ;DONT SAVE CHARS FOR THE OPERATOR LINE
RL.MSP==001000 ;A MESSAGE IS READY TO PROCESS..SCHEDULE JOB
RL.LGI==000400 ;JOB IS LOGGING IN NOW
RL.QTS==000200 ;QUOTES SEEN
RL.DIA==000100 ;USER IS IN DIALOGUE MODE
RL.STP==000040 ;JOB IS STOPPED BY THE OPERATOR
RL.NLG==000020 ;NO LOG FILE AVAILABLE
RL.MIP==000010 ;OPERATOR MESSAGE BEING PROCESSED
RL.FLS==000004 ;REQUEST TO FLUSH JOB
RL.CKP==000002 ;REQUEST TO CHECKPOINT THE JOB
;INITIAL SETTINGS FOR R
RL.INI==RL.ACT!RL.LGI ;FOR A NEW JOB SET ACTIVE, LOGIN IN PROGRESS
;AC F (LH)
FL.PER==400000 ;MONITOR LEVEL LINE STARTED WITH A PERIOD
FL.NER==200000 ;NOERROR IS IN EFFECT
FL.PLS==100000 ;DOING A PLEASE COMMAND
FL.SUP==040000 ;SUPPRESS THE NULL LINE (=MODE)
FL.LAB==020000 ;FOUND A LABEL ON THIS LINE
FL.SIL==010000 ;SILENCE THE LOG FILE
FL.UPA==004000 ;DOING UPARROW PROCESSING
FL.ACC==002000 ;NEED TO CHECK READ PRIVLEGES FOR THE CTL FILE
FL.TLE==001000 ;TIME LIMIT WAS EXCEEDED
FL.%XT==000400 ;%EXTRA TIME HAS BEEN GIVEN
FL.CRS==000200 ;CARRIAGE RETURN SEEN
FL.ERR==000100 ;SEND ERROR DATA WITH MESSAGE
FL.SPL==000040 ;SPECIAL PROCESSING TO ADD MORE DATA TO MESSAGE
FL.NOP==000020 ;NO OPERATOR INTERVENTION ALLOWED
FL.XCC==000010 ;
;**;[21]Add 1 line at FL.XCC JCR 10/15/85
FL.ZXC==000004 ;[21]Once was a generated control character
FR.RSC==400000 ;WANT COMMAND SCANNER TO RE-GET LAST CHARACTER
FR.%SG==200000 ;A % SIGN IS A LEGAL SIXBIT CHARACTER
FR.BAK==100000 ;BACKTO IN PROGRESS
FR.LSL==040000 ;LIST LINES SKIPPED IN LABEL SEARCHES
FR.FIN==020000 ;THIS LABEL SEARCH CAN PASS A %FIN::
FR.UHE==010000 ;AN UNHANDLED ERROR OCCURRED
FR.NBL==004000 ;IN GETRDX, A NON-BLANK HAS BEEN FOUND
FR.CTO==002000 ;CONTROL FILE IS OPEN BIT
FR.SLF==001000 ;FLAG FOR SUPPRESSING LF TO PTY
FR.STS==000400 ;STATUS UPDATE FIELD FOR INTERRUPT FLAGS
FR.LFO==000200 ;LOG FILE OPEN FLAG
FR.LFE==000100 ;LOG FILE ERROR ON OPEN
FR.CHK==000040 ;SEND CHECKPOINT DATA AND UPDATE
FR.SCC==000020 ;SENT ^C TO STOP THE JOB
FR.JLI==000010 ;SET TO INITIALIZE PTY WITH ^C..(-20 ONLY)
FR.TBL==000004 ;MONITOR LEVEL PROBLEM FLAG
;**;[22]Add 1 line after FR.TBL==000004 JCR 6/11/86
FR.RER==000001 ;[22]No restart for this job
;INITIAL SETTINGS FOR F
FL.INI==FL.ACC ;FOR A NEW JOB NEED A CHECK
FR.INI==0 ;FIRST LOOK AT THE LOG FILE
;FLAGS RETURNED BY THE JOBSTS UUO
JL.UJA==400000 ;USER JOB NUMBER ASSIGNED
JL.ULI==200000 ;USER LOGGED IN
JL.UML==100000 ;USER IS AT MONITOR LEVEL
JL.UOA==040000 ;USER OUTPUT IS AVAILABLE
JL.UDI==020000 ;USER CAN DO INPUT
JL.UJC==010000 ;USER HAS JACCT
;CHARACTERS
CHR.CC==3 ;CONTROL C
CHR.CG==7 ;CONTROL G
CHR.HT==11 ;HORIZONTAL TAB
CHR.LF==12 ;LINE FEED
CHR.VT==13 ;VERTICAL TAB
CHR.FF==14 ;FORM FEED
CHR.CR==15 ;CARRIAGE RETURN
CHR.CZ==32 ;CONTROL Z
CHR.A1==33 ;STANDARD ALTMODE
CHR.OA==74 ;OPEN ANGLE BRACKET
CHR.CA==76 ;CLOSE ANGLE BRACKET
CHR.QT==42 ;QUOTE CHARACTER
CHR.CA==54 ;COMMA CHARACTER
;SYMBOLS FOR CHECKPOINT REQUEUE INFORMATION
BA.JOB==1B0 ;SEEN THE JOB FLAG
BA.ORQ==1B1 ;JOB REUEUED BY OPERATOR
BA.URQ==1B2 ;USER REQUEUED THE JOB
BA.CHK==1B3 ;CHECKPOINT JOB BY USER
;SYMBOLS FOR MESSAGE PROCESSING
B.DEFR==400000 ;FLAG TO PROCESS BY STREAM
B.STCN==200000 ;STOP AND CONTINUE OPERATOR MESSAGE
;GETTAB TABLES
.GTSTS==0 ;USER JOB STATUS
ST.RUN==1B0 ;JOB IS RUNNABLE NOW
ST.CMW==1B1 ;COMMAND IS WAITING FOR CORE
ST.SWP==1B7 ;JOB IS SWAPPED OR BEING SWAPPED
ST.CLK==1B18 ;JOB HAS A CLOCK REQUEST
ST.JDC==1B20 ;WAITING FOR DUMP
ST.IRQ==1B22 ;WAITING FOR OPERATOR INTERVENTION
.GTPRG==3 ;USER PROGRAM NAME
.GTWSN==25 ;TABLE OF SIXBIT NAMES FOR WAIT CODES
;OPCODE DEFINITIONS
OPDEF TXTLOG [001000,,0] ;BATCON UUO - TEXT TO THE LOG FILE
OPDEF TXTJOB [002000,,0] ;BATCON UUO - TEXT TO THE JOB
OPDEF SIXLOG [003000,,0] ;BATCON UUO - SIXBIT TEXT TO THE LOG FILE
OPDEF IDENT [004000,,0] ;BATCON UUO - OUTPUT LINE IDENTIFIER
SUBTTL Data Base for Each Batch Stream
PHASE 0
;QUEUE ENTRY SYMBOLS FROM NEXTJOB MESSAGE
.JQITN:! BLOCK 1 ;INTERNAL NAME FROM QUASAR
.JQJBB:! BLOCK JIBSIZ ;SIZE OF JOB INFO BLOCK
.JQLIM:! BLOCK EQLMSZ ;LIMIT WORDS FOR JOB
.JQACT:! BLOCK 10 ;ACCOUNTING STRING FOR JOB
;SYSTEM DEPENDENT INFO
IFN FTUUOS,<
.JQPPN:! BLOCK 1 ;USERS PPN
.JQPAT:! BLOCK 6 ;JOB PATH INFORMATION
>;END FTUUOS
IFN FTJSYS,<
.JQNAM:! BLOCK 10 ;USER NAME STRING
.JQCON:! BLOCK 12 ;CONNECTED DIRECTORY STRING
.JQSIS:! BLOCK 1 ;SPOOLED FILE INFO
>
.JQCFP:! BLOCK 2 ;SAVE CTL FP WORDS (2 OF 5)
.JQCFD:! BLOCK FDXSIZ ;CTL FILE FD
.JQLFP:! BLOCK 2 ;SAVE CTL FP WORDS (2 OF 5)
.JQLFD:! BLOCK FDXSIZ ;LOG FILE FD
.JQBYT:! BLOCK 1 ;BYTE POINTER FOR FD CREATE
.JQTYP:! BLOCK 1 ;BATCH STREAM TYPE
.JQSTR:! BLOCK 1 ;BATCH STREAM NUMBER
.JQNOD:! BLOCK 1 ;BATCH STREAM NODE LOCATION
;**;[42]after .JQNOD add blocks to save the log error file FP
.JQEFP:! BLOCK 2 ;[42]SAVE LOG FP WORDS (2 OF 5)
.JQEFD:! BLOCK FDXSIZ ;[42]LOG ERROR FILE FD
.JQOBJ==.JQTYP ;OBJECT BLOCK POINTER
;;; END OF AREA BUILT FROM THE "NEXT JOB" FUNCTION
;;; THE JOB DATA BASE IS CONTINUED ON THE NEXT PAGE
.JREGS:! BLOCK 15 ;JOB PROCESSOR REGS 0-13,17
.JPLST:! BLOCK .JPSIZ ;PUSH DOWN LIST FOR JOB PROCESSOR
IFN FTUUOS,<
.JPTYI:! BLOCK PTYBLK*PTYBFR ;SPACE FOR PTY BUFFER RING
> ;END IFN FTUUOS
.JPTYO:! BLOCK PTYBLK*PTYBFR ;SPACE FOR PTY BUFFER RING
.JPINP:! BLOCK 3 ;RING HEADER FOR INPUT
.JPOUT:! BLOCK 3 ;RING HEADER FOR OUTPUT
.JPCHN:! BLOCK 1 ;SAVED 'IO1' WITH PTY CHANNEL NUMBER (PERMANENT ASSIGNMENT)
.JLABL:! BLOCK 1 ;LABEL BEING SEARCHED FOR
.JOPER:! BLOCK 2 ;LENGTH AND ADDRESS OF WTOR RESPONSE
.JBAKP:! BLOCK 1 ;LOCATION OF THE CURRENT BACKTO COMMAND
.JINFO:! BLOCK EQCKSZ ;CHECKPOINT/REQUEUE INFORMATION
.JCHRQ==.JINFO ;WORD 0 IS THE CHECKPOINT/REQUEUE LABEL
.JREQI:! BLOCK 1 ;REQUEUE INFORMATION FLAG WORD
.JQLOC:! BLOCK 1 ;LOCATION OF THE JOB
.JJOBN:! BLOCK 1 ;JOB NUMBER SAVED FOR RELEASE MESSAGE
.JCJFN:! BLOCK 1 ;CONTROL FILE JFN
.JLJFN:! BLOCK 1 ;LOG FILE JFN
;LOG PAGE DATA BASE
.JLFOB:! BLOCK FOB.SZ ;FILE OPEN BLOCK FOR LOG
.JLPAG:! BLOCK 1 ;LOG FILE PAGE FOR INITIAL DATA
.JLPCT:! BLOCK 1 ;LOG FILE PAGE COUNTER WORD
.JLPTR:! BLOCK 1 ;LOG FILE POINTER PAGE FOR INIT DATA
.JCFOB:! BLOCK FOB.SZ ;FILE OPEN BLOCK FOR CTL FILE
.JCUSI:! BLOCK 1 ;USETI/USETO COUNT (-1 IF END OF FILE)
.JLCNT:! BLOCK 1 ;BYTE COUNT
.JLUSI:! BLOCK 1 ;USETI/USETO COUNT
.JERCD:! BLOCK 1 ;BYTE (9).ERROR CHAR, .OPERATOR CHAR (18)ERROR CODE
.JSTAT:! BLOCK 1 ;SAVE RESULT OF JOBSTS UUO, FOR BATOPR
.JRUNT:! BLOCK 1 ;JOBS RUNTIME, USED BY BACKTO
.JOBCT:! BLOCK 1 ;NUMBER OF THIS JOB FOR BATCON
.JSPTR:! BLOCK 1 ;STATUS POINTER WORD
.JWCNT:! BLOCK 1 ;WTO MESSAGE COUNTER
.JWPTR:! BLOCK 1 ;WTO MESSAGE BYTE POINTER
.JWADR:! BLOCK 1 ;ADDRESS OF WTO PAGE
.JWTOF:! BLOCK 1 ;WTO FLAG..WTO IN PROGRESS
.JERRO:! BLOCK 1 ;ERROR CODE FOR OUTPUT END MESSAGE
.JMESC:! BLOCK 1 ;COUNT OF OPR MESSAGES PENDING
.JMLST:! BLOCK 1 ;LINK LIST FOR OPERATOR MESSAGES
.JREOL:! BLOCK 1 ;END OF LINE SENT FLAG
.JRTIM:! BLOCK 1 ;TIME STAMP NEEDED FLAG
.JPSIE:! BLOCK 1 ;PTY SETUP WORD FOR INTERRUPT SYSTEM
.JFLAG:! BLOCK 1 ;STREAM FLAGS FOR PTY
.JINPI:! BLOCK 1 ;COUNT OF INPUT READY INTERRUPTS
.JOUTI:! BLOCK 1 ;COUNT OF OUTPUT READY INTERRUPTS
.JOBST:! BLOCK 1 ;COUNT OF JOBSTS FOR JOB
.JWAIT:! BLOCK 1 ;COUNT OF WAITS DURING LOGIN/LOGOUT
.JICNT:! BLOCK 1 ;COUNT FOR CHARACTERS READ DURING LOGOUT
OUTCNT==10 ;Count for output wait
IFN FTJSYS,<
.JPLSO:! BLOCK 1 ;LINK LIST FOR PTY OUTPUT
.JPTTY:! BLOCK 1 ;PTYS TERMINAL NUMBER
.JJOBS:! BLOCK .JIT20+1 ;BLOCK FOR GETJI INFO
.JLOGI:! BLOCK 1 ;COUNT OF LOGIN TRIES FOR ?FULL
> ;END OF IFN FTJSYS
.JARG1:! BLOCK 1 ;ARGUMENT ONE FOR ERROR PROCESSING
.JARG2:! BLOCK 1 ;ARGUMENT TWO FOR ERROR PROCESSING
;**;[22]At .JARG2:!+0L add one line JCR 6/11/86
.JCRER:! BLOCK 1 ;[22]CTL file pass for %RERR:: processing
.JSIZE:! ;SIZE OF THE DATA BASE FOR EACH STREAM
DEPHASE
RELOC 0 ;START AT 0 TO SAVE SPACE
.JPAGS==1+<<.JSIZE-1>/1000> ;NUMBER OF PAGES NEEDED FOR THE DATA BASE
PHASE 0
;FORMAT OF THE MESSAGE QUEUE FOR EACH STREAM
IPC.RT:! BLOCK 1 ;ROUTINE TO PROCESS THE MESSAGE
IPC.TX:! BLOCK 1 ;ASCIZ OF THE NAME OF MESSAGE
IPC.AR:! BLOCK 1 ;ADDRESS OF NEXT ARGUMENT IN MESSAGE
IPC.CD:! BLOCK 1 ;CODE FOR QUASAR STATUS
IPC.DA:! ;START OF IPCF MESSAGE IN QUEUE
DEPHASE
RELOC 0
;MACRO DEFINITIONS
DEFINE LSTOFF< ;MACRO TO TURN OFF THE LISTING
IFE LSTING,<
.XCREF
XLIST>
LSTING==LSTING+1 ;COUNT XLIST DEPTH
>
DEFINE LSTON< ;MACRO TO TURN THE LISTING BACK ON
LSTING==LSTING-1 ;DECREMENT XLIST LEVEL
IFE LSTING,< ;DON'T TURN IT ON IF STILL NESTED
.CREF
LIST
SALL>
>
SUBTTL INTERRUPT DATA BASE FLAGS
INT.IN==3 ;INPUT INTERRUPT LEVEL
INT.OU==1 ;OUTPUT INTERRUPT LEVEL
INT.AL==1 ;ALL LEVELS
ALCSIZ==^D25 ;MINIMUM MEMORY ALLOCATION
SUBTTL MSGBLD - BUILD ERROR MESSAGE TABLE
DEFINE MSGBLD,<
XLIST
X (E.NORM,NORMALLY)
X (E.RUSR,Requeued by User)
X (E.ROPR,Requeued by Operator)
X (E.TLMT,Time Limit Exceeded)
X (E.CUSR,<Canceled by User ^P/.JARG1(R)/>)
X (E.COPR,Aborted by Operator)
X (E.JLOG,Logged Out..COMMAND IGNORED)
X (E.UERR,Terminated by User Error)
X (E.LFOE,Terminated from Log File Open Error)
X (E.LFIO,<Terminated from Log File I/O Error>)
X (E.NSTR,<No Free Batch Streams .. Job Requeued>)
X (E.NPTY,<No Free PTY's on the SYSTEM .. Job Requeued>)
X (E.STRA,<Stream Already Started>)
X (E.NJOB,<No Job Slots Available .. Job Requeued>)
X (E.JLOF,<Terminated from LOGIN Failure>)
X (E.SHTD,<Shutdown>)
X (E.STAR,<Started>)
X (E.NOPA,<Canceled No Operator Intervention Allowed>)
LIST
SALL
>
DEFINE X(A,B),<
XLIST
A==$$ ;ASSIGN VALUE TO SYMBOL
$$==$$+1 ;INCREMENT COUNTER
LIST
SALL
>;END X
$$==0 ;SET TO 0
MSGBLD ;ASSIGN THE VALUES
MSGTSZ==$$ ;COUNT OF MESSAGES
END