Trailing-Edge
-
PDP-10 Archives
-
bb-m080u-sm_t20_v7_0_23_mon_src_mod
-
monitor-sources/jntman.mac
There are 17 other files named jntman.mac in the archive. Click here to see a list.
; Edit= 9036 to JNTMAN.MAC on 15-Nov-88 by RASPUZZI
;Make sure that the system's name gets sent over during PHYKLP START/STACK/ACK
;sequence. Also, when the NODE% JSYS changes the name, have the local system
;notify remote systems. Finally, make CLUDGR send over the node name in the
;last 2 words of the optional connection data. I'm out of breath.
; UPD ID= 8533, RIP:<7.MONITOR>JNTMAN.MAC.7, 9-Feb-88 16:24:04 by GSCOTT
;TCO 7.1218 - Update copyright date.
; UPD ID= 8349, RIP:<7.MONITOR>JNTMAN.MAC.5, 19-Jan-88 13:41:20 by MCCOLLUM
;More of TCO 7.1185 - Put the TCO number on some comment lines
; UPD ID= 8347, RIP:<7.MONITOR>JNTMAN.MAC.4, 15-Jan-88 16:20:21 by MCCOLLUM
;TCO 7.1185 - Move all code to XCDSEC.
; UPD ID= 36, RIP:<7.MONITOR>JNTMAN.MAC.3, 9-Jul-87 10:26:16 by RASPUZZI
;More TCO 7.1017 - Engineer brain dead. Fix stupid test in previous edit.
; UPD ID= 34, RIP:<7.MONITOR>JNTMAN.MAC.2, 7-Jul-87 14:23:28 by RASPUZZI
;TCO 7.1017 - Make the NODE% JSYS return COMX19 if the caller gives a
;string more than 6 characters for the .NDVFY function.
; UPD ID= 2210, SNARK:<6.1.MONITOR>JNTMAN.MAC.57, 11-Jun-85 13:49:28 by PALMIERI
;TCO 6.1.1435 Increase the allowable block size on the Ethernet from 1467 to
;1476.
; UPD ID= 2090, SNARK:<6.1.MONITOR>JNTMAN.MAC.56, 3-Jun-85 14:47:49 by MCCOLLUM
;TCO 6.1.1406 - Update copyright notice.
; UPD ID= 1824, SNARK:<6.1.MONITOR>JNTMAN.MAC.55, 25-Apr-85 16:12:19 by PALMIERI
;TCO 6.1.1343 - Update to the new format for keeping track of port blocks in
; SCJSYS
; UPD ID= 1381, SNARK:<6.1.MONITOR>JNTMAN.MAC.54, 22-Jan-85 11:27:58 by PALMIERI
;Change parameter we use to read node reachability state to 2503.
;Have .NDGLI return error "no longer supported"
; UPD ID= 1331, SNARK:<6.1.MONITOR>JNTMAN.MAC.53, 14-Jan-85 17:48:55 by GLINDELL
;Set ND%RUK if endnode and NDRCHK returns an error
;Restructure .NDCIN so the interlocks are ok
;Require privs for the .NDRDB and .NDCIN functions
;Add comments
; UPD ID= 1315, SNARK:<6.1.MONITOR>JNTMAN.MAC.52, 11-Jan-85 16:50:08 by GLINDELL
;Fix SLDOB and SLSOB once again...
; UPD ID= 1200, SNARK:<6.1.MONITOR>JNTMAN.MAC.51, 12-Dec-84 17:08:57 by GLINDELL
;NDINT called SCTAND in section 1...
; UPD ID= 1158, SNARK:<6.1.MONITOR>JNTMAN.MAC.50, 5-Dec-84 17:29:44 by GLINDELL
;RTRNMX now lives in XCDSEC
; UPD ID= 1151, SNARK:<6.1.MONITOR>JNTMAN.MAC.49, 5-Dec-84 17:10:39 by PALMIERI
;Fix update 772 to return byte pointer is user AC3
; UPD ID= 1069, SNARK:<6.1.MONITOR>JNTMAN.MAC.48, 13-Nov-84 20:55:59 by GLINDELL
;Declare %RTEHS EXTERNAL
; UPD ID= 1066, SNARK:<6.1.MONITOR>JNTMAN.MAC.47, 13-Nov-84 16:01:29 by GLINDELL
;Minimum buffer size is 290 bytes
; UPD ID= 1003, SNARK:<6.1.MONITOR>JNTMAN.MAC.46, 7-Nov-84 16:22:55 by PALMIERI
;Remove NRBTBL routine of NDRDB NODE JSYS function
; UPD ID= 986, SNARK:<6.1.MONITOR>JNTMAN.MAC.45, 7-Nov-84 12:47:58 by PALMIERI
;Change maximum blocksize settable by SETSPD
; UPD ID= 934, SNARK:<6.1.MONITOR>JNTMAN.MAC.44, 28-Oct-84 21:02:12 by PRATT
;TCO 6.1.1022 - GETSIX will always return the updated BP in T2
; UPD ID= 881, SNARK:<6.1.MONITOR>JNTMAN.MAC.43, 12-Oct-84 18:07:29 by GLINDELL
;Return NODX17 if value is out of range in .NDSDP
;Implement .NDFLO parameter of the .NDSDP function
; UPD ID= 860, SNARK:<6.1.MONITOR>JNTMAN.MAC.42, 10-Oct-84 15:31:44 by HALPIN
;Return NDVFY1 to global for now
; UPD ID= 858, SNARK:<6.1.MONITOR>JNTMAN.MAC.41, 10-Oct-84 09:40:50 by PALMIERI
;Correct reachability status of executor node and add reachability unknown for
; out of area nodes
; UPD ID= 856, SNARK:<6.1.MONITOR>JNTMAN.MAC.40, 9-Oct-84 10:19:12 by GLINDELL
;Remove ND%KNO, it means the same as ND%EXM
; UPD ID= 855, SNARK:<6.1.MONITOR>JNTMAN.MAC.39, 9-Oct-84 10:05:34 by GLINDELL
;Set bit ND%EXM always if node is known by SCLINK
; UPD ID= 830, SLICE:<6.1.MONITOR>JNTMAN.MAC.35, 26-Sep-84 14:56:56 by NICHOLS
;Change name of SLROB to SLDOB (Dest Obj Type)
; UPD ID= 819, SLICE:<6.1.MONITOR>JNTMAN.MAC.34, 24-Sep-84 17:22:34 by PALMIERI
;Remove routine to read Router circuit blocks
; UPD ID= 785, SNARK:<6.1.MONITOR>JNTMAN.MAC.33, 4-Sep-84 14:34:38 by GLINDELL
;Use NOSKED/OKSKED in NRBCPD routine
; UPD ID= 777, SNARK:<6.1.MONITOR>JNTMAN.MAC.32, 31-Aug-84 14:22:02 by HALPIN
;Wrote new routine, NDRCHK, to check for node reachablity. Use new NMX
;interface designed for NTMAN
;
; UPD ID= 772, SNARK:<6.1.MONITOR>JNTMAN.MAC.31, 31-Aug-84 12:18:11 by PALMIERI
;Return updated byte pointer in NODE% function .NDRNM
; UPD ID= 657, SNARK:<6.1.MONITOR>JNTMAN.MAC.30, 2-Jul-84 16:54:12 by GLINDELL
;Read packets sent/received from SLPK? instead of from ELPK?
; UPD ID= 608, SNARK:<6.1.MONITOR>JNTMAN.MAC.29, 7-Jun-84 18:35:53 by GLINDELL
;Check min and max values in .NDSDP function
; UPD ID= 607, SNARK:<6.1.MONITOR>JNTMAN.MAC.28, 6-Jun-84 17:32:44 by GLINDELL
;Implement .NDSDP and .NDINT functions.
; UPD ID= 597, SNARK:<6.1.MONITOR>JNTMAN.MAC.27, 5-Jun-84 17:32:05 by GLINDELL
;Fix a RESCD/SWAPCD bug
; UPD ID= 563, SNARK:<6.1.MONITOR>JNTMAN.MAC.26, 24-May-84 15:59:08 by GLINDELL
;The world is not yet ready for 16-bit node addresses....
; UPD ID= 553, SNARK:<6.1.MONITOR>JNTMAN.MAC.25, 24-May-84 10:42:44 by GLINDELL
;Pick up default area # from RTRHOM, and store changed area # there
; UPD ID= 526, SNARK:<6.1.MONITOR>JNTMAN.MAC.24, 18-May-84 09:22:56 by GLINDELL
;Change node name/number routines to use IB block
;Accomodate new initialization
;Global job numbers
; UPD ID= 505, SNARK:<6.1.MONITOR>JNTMAN.MAC.23, 7-May-84 13:06:59 by GLINDELL
;RESCD needed in a place + use RTRMXN instead of SCTMXN
; UPD ID= 454, SNARK:<6.1.MONITOR>JNTMAN.MAC.22, 25-Apr-84 11:36:20 by GLINDELL
;Insert missing SWAPCD, and delete unnecessary instruction
; UPD ID= 377, SNARK:<6.1.MONITOR>JNTMAN.MAC.21, 9-Mar-84 10:47:27 by NICHOLS
;Small improvement in INFO DECNET efficiency at NDGNT
; UPD ID= 289, SNARK:<6.1.MONITOR>JNTMAN.MAC.20, 11-Jan-84 12:14:44 by MCINTEE
;Protective code for CTERM stuff
; UPD ID= 243, SNARK:<6.1.MONITOR>JNTMAN.MAC.19, 11-Nov-83 14:27:30 by PALMIERI
;Add minimal support for area numbers
; UPD ID= 233, SNARK:<6.1.MONITOR>JNTMAN.MAC.18, 1-Nov-83 17:09:54 by NICHOLS
;Report destination object type instead of source object type in NDCIN
; UPD ID= 212, SNARK:<6.1.MONITOR>JNTMAN.MAC.17, 7-Oct-83 14:00:18 by MCINTEE
;Add comment to set local name function
; UPD ID= 150, SNARK:<6.1.MONITOR>JNTMAN.MAC.16, 23-Jun-83 13:45:05 by CHALL
;NDGLN- Return updated pointer to node name, to caller.
; UPD ID= 118, SNARK:<6.1.MONITOR>JNTMAN.MAC.15, 27-Apr-83 10:31:50 by MCINTEE
;More of previous
; UPD ID= 115, SNARK:<6.1.MONITOR>JNTMAN.MAC.14, 26-Apr-83 09:54:01 by MCINTEE
;REMOVE PREVIOUS EDIT
; UPD ID= 109, SNARK:<6.1.MONITOR>JNTMAN.MAC.13, 22-Apr-83 11:18:31 by MCINTEE
;In NDGNT, get session control interlock.
; UPD ID= 91, SNARK:<6.1.MONITOR>JNTMAN.MAC.12, 25-Mar-83 14:46:15 by NICHOLS
;Fix NODE JSYS for SYSDPY, if there is no port table for an SJB,
;return zero in all port table fields
; UPD ID= 81, SNARK:<6.1.MONITOR>JNTMAN.MAC.10, 21-Mar-83 13:34:12 by CHALL
;Remove Read-Channel-Table function from NDRDB
; UPD ID= 80, SNARK:<6.1.MONITOR>JNTMAN.MAC.10, 17-Mar-83 14:23:18 by CHALL
;Add reading of RCB to NDRDB
; UPD ID= 77, SNARK:<6.1.MONITOR>JNTMAN.MAC.9, 9-Mar-83 14:40:43 by CHALL
;More changes to make NDRNM, NDCIN, and NDRDB work better
; UPD ID= 74, SNARK:<6.1.MONITOR>JNTMAN.MAC.8, 4-Mar-83 14:32:06 by CHALL
;Fix: NDRNM tried to use a fragged T2 (pointer to user's arg block)
; UPD ID= 73, SNARK:<6.1.MONITOR>JNTMAN.MAC.7, 4-Mar-83 12:27:33 by CHALL
;Add .NDRDB function, to read a table from the monitor
; UPD ID= 65, SNARK:<6.1.MONITOR>JNTMAN.MAC.6, 28-Feb-83 15:58:34 by CHALL
;Make .NDCIN look at NRT and CTERM when it is done with the jobs
; UPD ID= 46, SNARK:<6.1.MONITOR>JNTMAN.MAC.5, 17-Feb-83 15:27:34 by CHALL
;More .NDCIN
; UPD ID= 32, SNARK:<6.1.MONITOR>JNTMAN.MAC.4, 14-Feb-83 12:39:36 by MCINTEE
;ADD SEARCH SCPAR
; UPD ID= 26, SNARK:<6.1.MONITOR>JNTMAN.MAC.3, 14-Feb-83 11:01:18 by MCINTEE
;SIXBIT node names
;Add .NDCIN function, to read per-active-channel data for SYSDPY
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1976, 1988.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
; ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
; INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
; COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
; OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
; TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
SEARCH PROLOG,D36PAR,SCPAR,CTERMD,TTYDEF
TTITLE (JNTMAN,,< - Network Management JSYS >)
Subttl Table of Contents
; Table of Contents for JNTMAN
;
; Section Page
;
;
; 1. JNTMAN Definitions . . . . . . . . . . . . . . . . . . 3
; 2. .NODE - The NODE JSYS . . . . . . . . . . . . . . . . 4
; 2.1 NDSLN - Set Local Node Name . . . . . . . . . 5
; 2.2 NDGLN - Get Local Node Name . . . . . . . . . 6
; 2.3 NDSNM - Set Local Node Number . . . . . . . . 7
; 2.4 NDGNM - Get Local Node Number . . . . . . . . 8
; 2.5 NDNLS - Loopback Port Functions . . . . . . . 9
; 2.6 NDGNT - Get Node Table . . . . . . . . . . . . 10
; 2.7 NDSIC - Set Topology Interrupt Channel . . . . 12
; 2.8 NDCIC - Clear Topology Interrupt Channel . . . 13
; 2.9 NDGVR - Get NSP Version Information . . . . . 14
; 2.10 NDGLI - Get Line Information . . . . . . . . . 15
; 2.11 NDVFY - Verify Node Name . . . . . . . . . . . 16
; 2.12 NDRNM - Return Node Name . . . . . . . . . . . 17
; 2.13 NDCIN - Return Connection Information . . . . 18
; 2.14 NDRDB - Read DECnet Data Blocks . . . . . . . 23
; 2.15 NDSDP - Set DECnet Initialization Parameters . 26
; 2.16 NDINT - Insert Node Table . . . . . . . . . . 28
; 3. NTCIN - Topology Change Interrupt . . . . . . . . . . 29
; 4. NDRCHK - Get Node State Parameter . . . . . . . . . . 30
; 5. STONOD - Store Node Name in User Space . . . . . . . . 31
; 6. NDFVY1 - Verify Parsed Node Name . . . . . . . . . . . 32
; 7. NRBCPY - Copy Words to User Space . . . . . . . . . . 33
; 8. NRBGSJ - Get Job's SJB Address . . . . . . . . . . . . 34
; 9. NRBGSL - Get an SLB Address . . . . . . . . . . . . . 35
; 10. GETSIX - Copy SIXBIT Node Name . . . . . . . . . . . . 36
; 11. PUTSIX - Convert ASCII Node Name to SIXBIT . . . . . . 37
SUBTTL JNTMAN Definitions
;DEFINITIONS FOR NETWORK TOPOLOGY CHANGE TABLES
;THESE DEFINITIONS ARE FOR NTCTAB.
DEFSTR (NTCFRK,0,17,18) ;FORK WANTING INTERRUPT AT TOPOLOGY CHANGE
DEFSTR (NTCCHN,0,35,18) ;CHANNEL ON WHICH TO INTERRUPT FORK
EXTERN RTRHOM,RTRMXN,IBBLK,D36IFG,RTRNMX,%RTEHS
SUBTTL .NODE - The NODE JSYS
XSWAPCD ;[7.1185]IS SWAPPABLE
.NODE:: MCENT ;MONITOR CONTEXT ENTRY
; VALIDATE FUNCTION CODE AND DISPATCH TO PROCESSING ROUTINE
UMOVE T1,1 ;GET FUNCTION CODE FROM USER
CAIL T1,0 ;FUNCTION CODE WITHIN
CAIL T1,NDTLEN ; VALID RANGE ?
ITERR (ARGX02) ;NO, RETURN "INVALID FUNCTION" ERROR
CALL @NODTAB(T1) ;DISPATCH TO PROPER ROUTINE
ITERR () ;FAILED, RETURN ERROR CODE
MRETNG ;SUCCESS, DONE.
; TABLE OF NODE JSYS FUNCTIONS
;* NOTE THAT FUNCTIONS MARKED WITH AN ASTERISK ARE NO LONGER SUPPORTED WITH
; DECnet-36 MONITORS (R6.1 AND BEYOND).
NODTAB: XADDR. NDSLN ;[7.1185](0) SET LOCAL NODE NAME
XADDR. NDGLN ;[7.1185](1) GET LOCAL NODE NAME
XADDR. NDSNM ;[7.1185](2) SET LOCAL NODE NUMBER
XADDR. NDGNM ;[7.1185](3) GET LOCAL NODE NUMBER
XADDR. NDNLS ;[7.1185](4) SET LOOPBACK PORT *
XADDR. NDNLS ;[7.1185](5) CLEAR LOOPBACK PORT *
XADDR. NDNLS ;[7.1185](6) FIND LOOPBACK PORT *
XADDR. NDNLS ;[7.1185](7) SET NETWORK TOPOLOGY INFO *
XADDR. NDGNT ;[7.1185](10) GET NETWORK TOPOLOGY INFO
XADDR. NDSIC ;[7.1185](11) SET INT CHANNEL FOR TOPOLOGY CHANGE
XADDR. NDCIC ;[7.1185](12) CLEAR INT CHANNEL FOR TOPOLOGY CHANGE
XADDR. NDGVR ;[7.1185](13) GET NSP VERSION INFORMATION
XADDR. NDGLI ;[7.1185](14) GET LINE INFORMATION *
XADDR. NDVFY ;[7.1185](15) VERIFY NODE NAME
XADDR. NDRNM ;[7.1185](16) RETURN A NODE NAME
XADDR. NDCIN ;[7.1185](17) GET PER-CHANNEL INFORMATION
XADDR. NDRDB ;[7.1185](20) GET A TABLE
XADDR. NDSDP ;[7.1185](21) Set DECnet initial parameters
XADDR. NDINT ;[7.1185](22) Insert node table
NDTLEN==.-NODTAB
SUBTTL .NODE - The NODE JSYS -- NDSLN - Set Local Node Name
NDSLN: MOVE T1,CAPENB ;GET CURRENTLY ENABLED CAPABILITIES
TXNN T1,SC%WHL!SC%OPR ;WHEEL OR OPERATOR CAPABILITY REQUIRED
RETBAD (CAPX1) ;NOT ENOUGH CAPABILITY, RETURN ERROR
SKIPE D36IFG ;DECnet initialized/ing?
RETBAD (NODX16) ; -yes, return error
;We store the name in OURNAM as well as in the DECnet-36 initialization block
; so the old routines in the rest of the monitor will know the local node name.
UMOVE T2,2 ;GET ADDRESS OF USER'S ARGUMENT BLOCK
UMOVE T1,.NDNOD(T2) ;GET POINTER TO STRING IN USER SPACE
MOVEI T2,OURNAM ;WE'LL WRITE PARSED NAME TO OURNAM
CALLX (MSEC1,PARNDU) ;[7.1185]MAKE SURE NODE NAME IS KOSHER
RETBAD() ;FAILED, TELL CALLER WHY
MOVEM T2,OURCNT ;REMEMBER LENGTH OF OURNAM
MOVE T1,[POINT 7,OURNAM] ;Make sixbit
CALL <XENT PUTSIX> ;[7.1185](T1,T2/T1) node name
STOR T1,IBNAM,+IBBLK ; and store in IB block
CALL CLNODC ;[9036] (/) Notify cluster people
RETSKP ;SUCCESS
SUBTTL .NODE - The NODE JSYS -- NDGLN - Get Local Node Name
NDGLN: STKVAR <<NODNAM,WPN>> ;ROOM FOR NODE NAME IN 8-BIT BYTES
LOAD T1,IBNAM,+IBBLK ;Get local node name
XMOVEI T2,NODNAM ;POINT TO
HRLI T2,(POINT 8,0) ; LOCAL STORAGE
CALL <XENT GETSIX> ;[7.1185](T1,T2/T1) GET BYTE COUNT & CONVERT TO 8 BIT
XMOVEI T2,NODNAM ;GET POINTER TO NODE NAME AGAIN.
UMOVE T3,2 ;GET USER'S POINTER TO ARG BLOCK
UMOVE T3,.NDNOD(T3) ; FROM WHICH GET HIS BYTE POINTER
CALL STONOD ;(T1,T2,T3) STORE NAME TO USER
UMOVE T1,2 ;GET USER'S POINTER TO ARG BLOCK
UMOVEM T3,.NDNOD(T1) ;SAVE ADJUSTED DESTINATION POINTER
RETSKP ;RETURN SUCCESS
ENDSV. ;END STKVAR.
SUBTTL .NODE - The NODE JSYS -- NDSNM - Set Local Node Number
NDSNM: MOVE T1,CAPENB ;CHECK PRIVS
TXNN T1,SC%WHL!SC%OPR
RETBAD (LOUTX3) ;NO.
SKIPE D36IFG ;DECnet initialized/ing?
RETBAD (NODX16) ; -yes
UMOVE T1,T2 ;GET THE
UMOVE T1,.NDNOD(T1) ; NUMBER
CAIG T1,0 ;Zero node # is not allowed
RETBAD (GJFX10) ;FAILED. RANDOM ERROR
LDB T2,[POINTR(T1,RN%ARE)] ;Get area # off node number
SKIPN T2 ;Skip if there is one
MOVE T2,RTRHOM ; otherwise default to RTRHOM/%RTHOM
DPB T2,[POINTR(T1,RN%ARE)] ;Put back area #
MOVEM T2,RTRHOM ; and in RTRHOM as well
STOR T1,IBADR,+IBBLK ;Store node # in IB block
LDB T2,[POINTR(T1,RN%NOD)] ;Now get local node index
MOVEM T2,RTRADR ; and save for ROUTER
RETSKP
SUBTTL .NODE - The NODE JSYS -- NDGNM - Get Local Node Number
NDGNM: UMOVE T2,2 ;GET POINTER TO USER ARG BLOCK
LOAD T3,IBADR,+IBBLK ;Get local node #
UMOVEM T3,0(T2) ;STORE NUMBER
RETSKP ; AND DONE ALREADY
SUBTTL .NODE - The NODE JSYS -- NDNLS - Loopback Port Functions
NDNLS: RETBAD (NODX05) ;ERROR: FUNCTION NO LONGER SUPPORTED
; USE NTMAN% JSYS INSTEAD
SUBTTL .NODE - The NODE JSYS -- NDGNT - Get Node Table
NDGNT: TRVAR <GNTCNT,GNTLAS,GNTTMP,<NODNAM,WPN>>
; SET UP TO LOOP OVER EACH NODE
UMOVE T4,2 ;GET ADDRESS OF USER'S ARGUMENT BLOCK
UMOVE T1,.NDNND(T4) ;GET NUMBER OF WORDS IN BLOCK
ADD T1,T4 ;COMPUTE LAST ADDRESS
SOS T1 ; TO USE
MOVEM T1,GNTLAS ;SAVE LAST ADDRESS IN USER SPACE TO STORE INTO
MOVE Q2,SCTNDC ;GET THE COUNT OF NODES DEFINED BY SCTL
UMOVE T1,2 ;GET THE USER'S ARGUMENT BLOCK POINTER
MOVE Q1,T1 ;FIND THE START
ADDI Q1,.NDBK1 ; OF THE POINTERS
ADD Q2,Q1 ;CALCULATE START OF THE LITTLE BLOCKS
HRRZ T2,Q2 ;GET RID OF SECTION NUMBER
CAMLE T2,GNTLAS ;ARE THE POINTERS GOING TO FIT?
RETBAD (ARGX04) ;ERROR: NOT ENOUGH ROOM FOR FUNCTION
MOVX T2,.NDNBS ;GET THE SIZE OF A NODE BLOCK
UMOVEM T2,.NDCNT(T1) ;RETURN THIS COUNT TO THE USER
MOVEI Q3,1 ;INITIALIZE NODE NUMBER
SETZM GNTCNT ;INITIALIZE THE COUNT OF NODES RETURNED
;Here we have:
; Q1/ Pointer to pointer area in JSYS arg block
; Q2/ Pointer to the current "little" node block
; Q3/ Current node number
NDGNT3: MOVE T1,Q3 ;THE NODE NUMBER
MOVE T2,RTRHOM ;Default to RTRHOM/%RTHOM
DPB T2,[POINTR(T1,RN%ARE)] ;Put back area #
CALL NDRCHK ;Call to check Node Reachablity
JRST NDGNT4 ;Unreachable
MOVE T1,Q3 ;Reachable, GET OUR NODE NUMBER
CALL <XENT SCTA2N> ;[7.1185](T1/T1)GET SESSION CONTROL'S NAME FOR NODE
JRST NDGNT4 ;NONE THERE, CHECK NEXT ONE
XMOVEI T2,NODNAM ;POINT TO
HRLI T2,(POINT 8,0) ; LOCAL STORAGE
CALL <XENT GETSIX> ;[7.1185](T1,T2/T1) GET BYTE COUNT AND CONVERT TO 8 BIT
; ...
; ...
XMOVEI T2,NODNAM ;GET ADDRESS OF NODE NAME
MOVX T4,.NDNBS ;LENGTH OF A "LITTLE" BLOCK
ADDI T4,1 ;PLUS
CAIL T1,5 ; EXTRA ROOM (5 CHARS PER WORD)
ADDI T4,1 ; FOR NODE NAME TEXT (MAXIMUM 6 CHARS)
MOVEM T4,GNTTMP ;STORE IT FOR A WHILE
HRRI T3,.NDNBS(Q2) ;MAKE UP A BYTE POINTER
HRLI T3,(POINT 7,) ; TO PUT IN LITTLE NODE BLOCK
UMOVEM T3,.NDNAM(Q2) ;GIVE THE USER THE BYTE POINTER ALSO
CALL STONOD ;(T1,T2,T3)STORE THE NAME IN THE "LITTLE" BLOCK
MOVX T1,.NDSON ;THE STATE IS "ON"
UMOVEM T1,.NDSTA(Q2) ;STORE THE STATE IN "LITTLE" BLOCK
UMOVEM Q2,(Q1) ;STORE THE POINTER TO THE LITTLE BLOCK
ADD Q2,GNTTMP ;POSITION Q2 A HEAD OF NEXT LITTLE BLOCK
HRRZ T1,Q2 ;GET RID OF THE SECTION NUMBER
AOS GNTCNT ;KEEP TRACK OF HOW MANY WE HAVE DONE
CAMLE T1,GNTLAS ;IS THE NEXT ONE GOING TO FIT?
JRST NDGNT5 ;NO. ERROR EXIT.
ADDI Q1,1 ;POINT TO THE NEXT POINTER PLACE
NDGNT4: ADDI Q3,1 ;TRY NEXT NODE NUMBER
MOVE T1,GNTCNT ;GET THE COUNT OF HOW MANY WE'VE DONE
CAMG T1,SCTNDC ;IS IS HOW MANY WE SAID?
CAMLE Q3,RTRMXN ; OR IS IT BIGGER THAN NN?
TRNA ;YES, FINISH UP
JRST NDGNT3 ;NO, DO THE NEXT ONE
UMOVE T1,2 ;GET THE BLOCK POINTER BACK
MOVE T2,GNTCNT ;GET THE COUNT WE RETURNED
XCTU [HRLM T2,.NDNND(T1)] ;RETURN THE COUNT TO USER
RETSKP ; AND RETURN TO SENDER
;HERE ON ERROR - RETURN COUNT AND EXIT.
NDGNT5: UMOVE T1,2 ;GET THE BLOCK POINTER BACK
MOVE T2,GNTCNT ;GET THE COUNT WE RETURNED
XCTU [HRLM T2,.NDNND(T1)] ;RETURN THE COUNT TO USER
RETBAD (ARGX04)
ENDTV. ;END TRVAR
SUBTTL .NODE - The NODE JSYS -- NDSIC - Set Topology Interrupt Channel
NDSIC: UMOVE T3,T2 ;GET USER BLOCK ADDRESS
XCTU [ MOVEI T1,.NDCHN(T3)] ;POINT TO CHANNEL NUMBER WORD
UMOVE T1,(T1) ;GET THE CHANNEL NUMBER
SKIPL T1 ;VALIDATE CHANNEL NUMBER
CAILE T1,^D35 ;CHANNEL NUMBER TOO HIGH
RETBAD (ARGX13) ;NEGATIVE CHANNEL NUMBERS ARE ILLEGAL
CAIL T1,.ICAOV ;SKIP IF GOOD NUMBER
CAILE T1,.ICNXP ;SKIP IF BAD NUMBER
JRST CHANOK ;CHANNEL NUMBER OK.
RETBAD (ARGX13) ;BAD CHANNEL NUMBER
;** This code should have some interlocks. Two forks could decide
;** to use the same entry in the notification table. The consequence
;** will be that one fork will fail to get any topology interrupts.
;** This should be fixed in future. /Gunnar Lindell
CHANOK: SETZ T4, ;T4 WILL HOLD ADDRESS OF FREE ENTRY
MOVEI T2,NTCTAB ;POINT TO TOP OF TABLE OF WAITING FORKS
;HERE TO DETERMINE IF FORK ALREADY HAS SET THE INTERRUPT ONCE
CHNOK1: SKIPN (T2) ;SKIP IF ENTRY IS BEING USED
JRST [ MOVE T4,T2 ;SAVE FOR FORK NOT CURRENTLY ACTIVATED
JRST CHNOK2] ;TRY NEXT ENTRY
LOAD T3,NTCFRK,(T2) ;GET THE FORK NUMBER
CAME T3,FORKX ;DOES THIS ENTRY BELONG TO THIS FORK
JRST CHNOK2 ;NO, LOOK AT NEXT ENTRY
STOR T1,NTCCHN,(T2) ;YES. PUT NEW CHANNEL NUMBER IN
RETSKP ; AND RETURN SUCCESS NOW
CHNOK2: CAIE T2,NTCTAB+<NTCMAX-1> ;HAVE WE LOOKED AT WHOLE TABLE
AOJA T2,CHNOK1 ;NO - KEEP LOOKING
SKIPN T4 ;DID WE FIND AN ENTRY?
RETBAD (NSPX26) ;ERROR - TABLE OF TOPOLOGY WATCHERS IS FULL
STOR T1,NTCCHN,(T4) ;SAVE THE CHANNEL NUMBER
MOVE T1,FORKX ;NOW GET THE FORK NUMBER
STOR T1,NTCFRK,(T4) ;AND SAVE
SETONE FKNTC,(T1) ;FLAG IN FORK DATA BASE
RETSKP
SUBTTL .NODE - The NODE JSYS -- NDCIC - Clear Topology Interrupt Channel
XNENT (NTCOFF,G) ;[7.1185]NTCOFF::, XNTCOF::
NDCIC: MOVEI T1,NTCTAB ;[7.1185]FIND THE FORK'S ENTRY
NDCIC1: LOAD T2,NTCFRK,(T1) ;GET THE FORK NUMBER FOR THIS ENTRY
CAMN T2,FORKX ;THIS FORKS ENTRY
JRST [ SETZM (T1) ;CLEAR ENTRY
MOVE T1,FORKX ;GET FORK INDEX
SETZRO FKNTC,(T1) ;CLEAR THE ITEM IN FORK DATA BASE
RETSKP]
CAIE T1,NTCTAB+<NTCMAX-1> ;AT END OF TABLE
AOJA T1,NDCIC1 ;NO - KEEP LOOKING
RETSKP ;INDICATE SUCCESS EVEN WHEN NEVER SET
SUBTTL .NODE - The NODE JSYS -- NDGVR - Get NSP Version Information
NDGVR: UMOVE T3,T2 ;GET THE USER BLOCK POINTER
MOVX T2,2 ;GET NUMBER OF VERSIONS TO RETURN
UMOVEM T2,.NDNVR(T3) ;STORE IN USER ARGUMENT BLOCK
UMOVE T1,.NDCVR(T3) ;GET THE ADDRESS OF THE COMMUNICATION BLOCK
MOVE T2,NSPVER ;ECL (FORMERLY NSP) VERSION NUMBER
UMOVEM T2,.NDVER(T1) ;SAVE IN USER SPACE
MOVE T2,NSPECO ;ECL ECO LEVEL
UMOVEM T2,.NDECO(T1) ;SAVE IN USER SPACE
MOVE T2,NSPUEC ;GET THE CUSTOMER CHANGE NUMBER
UMOVEM T2,.NDCST(T1) ;SAVE IN USER SPACE
;NOW GIVE USER THE ROUTING VERSION INFORMATION
UMOVE T1,.NDRVR(T3) ;GET THE ADDRESS OF THE ROUTING BLOCK
MOVE T2,RTRVER ;ROUTING VERSION NUMBER
UMOVEM T2,.NDVER(T1) ;SAVE IN USER SPACE
MOVE T2,RTRECO ;ROUTING ECO
UMOVEM T2,.NDECO(T1) ;SAVE IN USER SPACE
MOVE T2,RTRCUS ;GET THE CUSTOMER CHANGE NUMBER
UMOVEM T2,.NDCST(T1) ;SAVE IN USER SPACE
RETSKP ;RETURN
SUBTTL .NODE - The NODE JSYS -- NDGLI - Get Line Information
NDGLI: RETBAD (NODX05) ;[7.1185]ERROR: Function no longer supported
; use NTMAN% JSYS to obtain this information
SUBTTL .NODE - The NODE JSYS -- NDVFY - Verify Node Name
; NDVFY - VERIFY NODE NAME IS IN MONITOR'S DATABASE OF REACHABLE NODES
; USES T1-T4
NDVFY: SAVEAC Q1
STKVAR <<NDVNOD,WPN>,VFYSTR,VFYARG,VFYPTR> ;[7.1017]
; GET NODE NAME FROM USER SPACE
UMOVE Q1,T2 ;GET ADDRESS OF USER ARGUMENT BLOCK
MOVEM Q1,VFYARG ;SAVE IT FOR LATER
UMOVE T1,.NDNAM(Q1) ;GET POINTER TO NODE NAME IN USER SPACE
MOVEM T1,VFYPTR ;[7.1017] Save it for later use
TLC T1,-1 ;[7.1017] Did user give us -1,,addr?
TLCN T1,-1 ;[7.1017]
HRLI T1,(POINT 7,) ;[7.1017] If so, make it a 7 bit byte pointer
SETZ T4, ;[7.1017] Init a counter register
CHRCNT: XCTBU [ILDB T2,T1] ;[7.1017] Get a character from the user
ERJMP [RETBAD (ARGX04)] ;[7.1017] Must have given us a bogus arg block
SKIPE T2 ;[7.1017] All done?
AOJA T4,CHRCNT ;[7.1017] No,
CAILE T4,CPN ;[7.1017] Too many characters from user?
RETBAD (COMX19) ;[7.1017] Yes, return error to caller
MOVE T1,VFYPTR ;[7.1017] Get byte pointer back for PARNDU
XMOVEI T2,NDVNOD ;GET ADDRESS OF DESTINATION FOR NAME
CALLX (MSEC1,PARNDU) ;[7.1185](T1,T2/T1,T2)GET NODE NAME FROM USER
RETBAD () ;FAILED
; VERIFY THAT THE NODE IS IN NAME MAPPING TABLE
MOVX T1,<POINT 7,> ;FORM POINTER TO NODE NAME
HRRI T1,NDVNOD ;GET LOCAL ADDRESS OF NODE NAME
CALL <XENT NDVFY1> ;[7.1185](T1,T2/T1)DO THE WORK
;RETURN INFO TO THE USER
MOVE T2,VFYARG ;RETRIEVE ADDR OF USER'S ARG BLOCK
UMOVEM T1,.NDFLG(T2) ;STORE NEWS FOR THE USER
RETSKP ;SUCCESS RETURN
ENDSV. ;END STKVAR AT NDVFY
SUBTTL .NODE - The NODE JSYS -- NDRNM - Return Node Name
; NDRNM - GIVEN A NODE NUMBER, RETURN THE NODE NAME
NDRNM: STKVAR <<NODNAM,WPN>,ARGADR>
MOVEM T2,ARGADR ;SAVE THE ADDRESS OF THE USER'S ARG BLOCK
UMOVE T1,.NDNOD(T2) ;GET NODE NUMBER
CALL <XENT SCTA2N> ;[7.1185](T1/T1) FIND NAME FOR THIS NODE NUMBER
RETBAD (NSPX25) ;NO NAME FOUND
XMOVEI T2,NODNAM ;POINT TO
HRLI T2,(POINT 8,0) ; LOCAL STORAGE
CALL <XENT GETSIX> ;[7.1185](T1,T2/T1) FIND COUNT & CONVERT TO 8-BIT
XMOVEI T2,NODNAM ;GET NODE NAME ADDRESS
MOVE T3,ARGADR ;GET THE ADDRESS OF THE USER'S ARG BLOCK
UMOVE T3,.NDCVR(T3) ;GET THE USER'S BP
CALL STONOD ;(T1,T2,T3) AND STORE THE NAME TO HIM
UMOVEM T3,3 ;Return updated byte pointer to user
RETSKP ;RETURN SUCCESS
ENDSV.
SUBTTL .NODE - The NODE JSYS -- NDCIN - Return Connection Information
;HERE FOR FUNCTION NDCIN - READ PER-CONNECTION DATA (FOR SYSDPY)
;CALL WITH USER'S T2/ ADDRESS OF BLOCK:
; +0/ (IGNORED),,NUMBER WORDS REQUESTED
; +1/ JOB NUMBER
; +2/ CHANNEL NUMBER FROM PREVIOUS CALL (0 FOR FIRST)
; +3.../ SPACE FOR REST OF DATA GIVEN IN NB BEGSTR
;RETURNS +2 ON SUCCESS, +1 ON ERROR, WITH
; +0/ NUMBER WORDS RETURNED,,NUMBER WORDS REQUESTED
; +1/ JOB NUMBER (POSSIBLY DIFFERENT FROM CALL; -1 IF NO MORE)
; +2/ CHANNEL NUMBER OF RETURNED DATA
; +3.../ REST OF NB DATA BLOCK, FILLED IN
;TO USE THIS FUNCTION, CALL THE FIRST TIME WITH JOB/ 0, CHANNEL/ 0
;THEN KEEP CALLING UNTIL NO-MORE-JOBS ERROR (NODX11)
;THE JSYS RETURNS WITH DATA FOR THE NEXT ACTIVE CHANNEL FOR THE GIVEN JOB.
;IT WILL BUMP THE CHANNEL NUMBER FOR EACH CALL. WHEN ALL CHANNELS
;ARE DONE FOR THE GIVEN JOB, IT WILL BUMP THE JOB NUMBER AND FIND ITS
;FIRST ACTIVE CHANNEL.
;WHEN ALL JOBS HAVE BEEN LOOKED AT, IT RETURNS INFORMATION FOR "SPECIAL"
;NON-JOB SJB'S (LIKE NRT AND CTERM). THE JOB SLOT IN THE USER'S NODE
;BLOCK IS SET TO THE ASCII NAME OF THE PROGRAM WHO OWNS THE CHANNELS.
;WHEN ALL JOBS AND SPECIALS HAVE BEEN LOOKED AT, IT SETS JOB/ -1 TO
;INDICATE THAT IT IS DONE AND RETURNS A NODX11 ERROR (CALLING THE JSYS
;WITH JOB/ -1 IS AN ERROR).
;NUMBER OF WORDS REQUESTED MUST BE AT LEAST NB.LEN.
;NUMBER OF WORDS RETURNED WILL ALWAYS BE NB.LEN.
;LOCAL PERMANENT AC USE:
; P1/ ADDRESS OF USER'S ARGUMENT BLOCK, IN USER'S CONTEXT
; P2/ JOB NUMBER [0-MXGLBS] (global job #)
; P3/ CHANNEL NUMBER WITHIN JOB [1-MAXPRT]
; P4/ ADDRESS OF SJB
NDCIN:
MOVE T1,CAPENB ;GET CURRENTLY ENABLED CAPABILITIES
TXNN T1,SC%WHL!SC%OPR ;DOES THE CALLER HAVE WHEEL OR OPERATOR?
RETBAD (CAPX1) ;NO - ERROR: INSUFFICIENT CAPABILITIES
SAVEAC <P1,P2,P3,P4> ;SAVE THE PERMANENT ACS
UMOVE P1,2 ;GET ADDRESS OF USER'S ARGUMENT BLOCK
ULOAD T1,NBRQW,(P1) ;GET THE NUMBER OF WORDS REQUESTED
CAIGE T1,NB.LEN ;ENOUGH TO MAKE IT INTERESTING?
RETBAD (NODX07) ;NO - ERROR: ARGUMENT BLOCK NOT LONG ENOUGH
USTOR T1,NBRTW,(P1) ;YES - RETURN IT AS WORDS WRITTEN (HA!)
; ...
; ...
;READ JOB AND CHANNEL NUMBERS
;IF THE CHANNEL IS TOO HIGH, BUMP THE JOB NUMBER & SET TO FIRST CHANNEL
;READ THE JSB; LOOK FOR THE NEXT HIGHER ACTIVE CHANNEL
;NOTE: THE CHANNEL NUMBER IS EFFECTIVELY BUMPED HERE, SINCE THE USER THINKS
;THEY ARE IN THE RANGE 1:N AND THE MONITOR THINKS 0:N-1.
ULOAD P2,NBJOB,(P1) ;GET THE CALLER'S JOB NUMBER
ULOAD P3,NBCHN,(P1) ;GET THE CALLER'S PREVIOUS CHANNEL NUMBER
CAIGE P3,0 ;IS THE CHANNEL NUMBER REAL?
RETBAD (NODX10) ;NO - ERROR
CAIGE P3,MAXPRT ;YES - WAS THAT THE LAST CHANNEL FOR THIS JOB?
IFSKP. ; -yes,
SETZ P3, ; SET TO THE FIRST CHANNEL
AOJ P2, ; OF THE NEXT JOB
ENDIF.
;Since we allow NRT and CTM to be 'special jobs', P2 will be negative
; (because ASCII) if we have any of the 'special' 'jobs'
JUMPL P2,SPCJOB ;Go handle 'special jobs'
;Now we have what we believe is a good global job number in P2
; It will be range-checked when we convert from global to local.
NDCIN1: MOVE T1,P2 ;Get global job #
CALLX (MSEC1,GL2LCL) ;[7.1185] and convert to local
JRST NDCINJ ; -no such job, move to next
;Map the JSB, page in the required page, go NOSKED to protect data structures
CALLX (MSEC1,MAPJSB) ;[7.1185]Map the JSB
JRST NDCINJ ; -not there, move to next one
SKIP JSBSJB(T1) ;Skip in the page so we dont cause NOSKED page
; faults below.
NOSKED
MOVE P4,JSBSJB(T1) ;Get SJB pointer
CALLX (MSEC1,CLRJSB) ;[7.1185]Clear JSB mapping now
SKIPE P4 ;Test SJB pointer
IFSKP. ; -there wasnt one,
OKSKED ; allow others in
JRST NDCINJ ; and move to next job
ENDIF.
LOAD T2,SJCHC,(P4) ;Get the length of the channel table
CALL REDSJB ;Read data from SJB
IFNSK. ; - fail return
OKSKED ; allow others in
JRST NDCINJ ; and move to next job
ENDIF.
OKSKED ;Success, allow the rest of the world again
RETSKP ; and return success
;SPCJOB - come here to handle 'special jobs'
SPCJOB: CAME P2,[ASCII /NRT/] ;NRT?
IFSKP. ; -yes,
MOVE P4,NRTSJP ; Get NRT's SJB pointer
ELSE.
CAME P2,[ASCII /CTM/] ; -not NRT, is is CTERM?
RETBAD (NODX11) ; -neither, return error
SKIPG P4,CTHSAP ; CTERM: get SAB pointer
JRST NDCIJX ; -there isnt one, go return error
LOAD P4,SASJB,(P4) ; Get CTERM SJB.
ENDIF.
NOSKED ;Protect us
LOAD T2,SJCHC,(P4) ;Get the length of the channel table
CALL REDSJB ;Read data from SJB
IFNSK. ; - fail return
OKSKED ; allow others in
JRST NDCINJ ; and move to next job
ENDIF.
OKSKED ;Success, allow the rest of the world again
RETSKP ; and return success
;NDCINJ - move to 'next job'
NDCINJ: SETZ P3, ;Channel 0 of next job
JUMPL P2,NDCIJ1 ;Go handle 'special jobs'
CAIG P2,MXGLBS ;Was that the last job?
AOJA P2,NDCIN1 ; -no, go do next one
;Out of ordinary jobs - set up for NRT
MOVE P2,[ASCII /NRT/] ;Load identifier
JRST SPCJOB ; and go handle 'special job'
;NDCIJ1 - come here when we should move to the next 'special job'
NDCIJ1: CAMN P2,[ASCII /CTM/] ;Did we look at CTERM (last special job)?
JRST NDCIJX ; -yes, everything is done
MOVE P2,[ASCII /CTM/] ;No, then its CTERM we should do now
JRST SPCJOB ; and go do 'special job'
;NDCIJX - return error
NDCIJX: SETO T1, ;Store -1 as flag to user
USTOR T1,NBJOB,(P1)
RETBAD (NODX11) ;Return 'bad job number'
;REDSJB - read the SJB
REDSJB: CAML P3,T2 ;IS THE CHANNEL WITHIN RANGE?
RET ; -no, return to get next job
LOAD T3,SJCHT,(P4) ;GET THE ADDRESS OF CHANNEL TABLE FROM SJB
ADD T3,P3 ;FIND THE ENTRY FOR THIS CHANNEL
SKIPN T4,(T3) ;GET IT (ADDRESS OF SLB) - IS THERE ONE?
AOJA P3,REDSJB ;NO - TRY THE NEXT CHANNEL
; ...
; ...
;GOT SJB AND SLB ADDRESSES (IN P4 AND T4):
;COPY DATA FROM THIS CHANNEL'S ENTRY IN PORT TABLE.
NDCIN3: LOAD T3,SJPRT,(P4) ;ELSE GET THE ADDRESS OF THE SJB'S PORT TABLE
JUMPN T3,NDCIN4 ;IS THERE A PORT TABLE?
USTOR T3,NBTYP,(P1) ;NO, STORE ZEROS IN ALL
USTOR T3,NBFRK,(P1) ; PORT TABLE
USTOR T3,NBJFN,(P1) ; FIELDS
JRST NDCIN5 ;DONE
NDCIN4: ADDI T3,1(P3) ;Offset by channel number
MOVE T3,(T3) ;Get the port block
LOAD T2,PTTYP,(T3) ;GET THE OPEN TYPE
USTOR T2,NBTYP,(P1) ;SAVE IT FOR THE USER
LOAD T1,PTFRK,(T3) ;GET THE FORK THAT OWNS THIS CHANNEL
USTOR T2,NBFRK,(P1) ;SAVE IT
LOAD T2,PTJFN,(T3) ;GET THE JFN ASSOCIATED WITH THE CHANNEL
USTOR T2,NBJFN,(P1) ;SAVE IT
NDCIN5:
;COPY DATA FROM THE SLB (ADDRESS IN T4).
LOAD T2,PTTYP,(T3) ;Get the open type
SKIPE T2 ;DCN: or SRV:?
IFSKP. ;SRV:
LOAD T2,SLSOB,(T4) ; Get the source object type
ELSE. ;DCN:
LOAD T2,SLDOB,(T4) ; Get destination object type
ENDIF.
USTOR T2,NBOBJ,(P1) ;SAVE IT FOR THE USER
LOAD T2,SLSTA,(T4) ;GET THE LINK STATE
USTOR T2,NBSTA,(P1) ;SAVE IT
LOAD T2,SLXFL,(T4) ;GET THE TRANSMIT FLOW OPTION
USTOR T2,NBXFL,(P1) ;SAVE IT
LOAD T2,SLRFL,(T4) ;GET THE RECEIVE FLOW OPTION
USTOR T2,NBRFL,(P1) ;SAVE IT
LOAD T2,SLGOL,(T4) ;GET THE RECEIVE DATA REQUEST GOAL
USTOR T2,NBGOL,(P1) ;SAVE IT
LOAD T2,SLINQ,(T4) ;GET THE LINK INPUT QUOTA
USTOR T2,NBINQ,(P1) ;SAVE IT
LOAD T2,SLOTQ,(T4) ;GET THE LINK OUTPUT QUOTA
USTOR T2,NBOTQ,(P1) ;SAVE IT
LOAD T2,SLDNA,(T4) ;GET THE DESTINATION NODE NUMBER
USTOR T2,NBDNA,(P1) ;SAVE IT
LOAD T2,SLSIZ,(T4) ;GET THE SEGMENT SIZE IN BYTES
USTOR T2,NBSSZ,(P1) ;SAVE IT
LOAD T2,SLRSN,(T4) ;GET THE REASON FOR DISCONNECT OR REJECT
USTOR T2,NBRSN,(P1) ;SAVE IT
; ...
; ...
;NOW GET THE ADDRESS OF THE ELB (INTO T3) AND COPY THINGS FROM THERE
LOAD T3,SLPID,(T4) ;GET THE ELB ADDRESS FROM THE SLB
LOAD T2,ELLLA,(T3) ;GET THE LOCAL LINK ADDRESS
USTOR T2,NBLLA,(P1) ;SAVE IT
LOAD T2,ELRLA,(T3) ;GET THE REMOTE LINK ADDRESS
USTOR T2,NBRLA,(P1) ;SAVE IT
;Note: the PKS and PKR counts are updated in SCLINK: hence they do not
; include NSP overhead for the links
LOAD T2,SLPKS,(T4) ;Get packets sent
USTOR T2,NBPKS,(P1) ;SAVE IT
LOAD T2,SLPKR,(T4) ;Get packets received
USTOR T2,NBPKR,(P1) ;SAVE IT
LOAD T2,ELVER,(T3) ;GET THE REMOTE NSP VERSION
USTOR T2,NBVER,(P1) ;SAVE IT
;AT END P4/ SJB ADDR, T4/ SLB ADDR, T3/ ELB ADDR, P1/ USER'S BLOCK
AOJ P3, ;BUMP CHANNEL NUMBER TO MAKE IT RELATIVE TO USER
USTOR P2,NBJOB,(P1) ;RETURN JOB NUMBER TO CALLER
USTOR P3,NBCHN,(P1) ;DITTO CHANNEL NUMBER
JUMPGE P2,RSKP ;RETURN SUCCESS IF NOT SPECIAL
CAMN P2,[ASCII /NRT/] ;NRT?
JRST NDCINN ;YES - HANDLE IT
CAME P2,[ASCII /CTM/] ;ELSE RETURN THE TTY NUMBER - CTERM?
RETSKP ;NO - RETURN SUCCESS ANYWAY
MOVE T1,CTHCHP ;GET THE ADDRESS OF THE CTERM DATA BLOCK
ADD T1,P3 ; FROM THE CTERM CHANNEL TABLE
MOVE T1,(T1)
LOAD T1,CHLIN,(T1) ;GET THE TTY NUMBER FROM THE CDB
USTOR T1,NBJFN,(P1) ;SAVE IT IN PLACE OF THE JFN
RETSKP ;DONE
NDCINN: LOAD T1,SLPSM,(T4) ;GET THE USER'S TTY NUMBER FROM THE SLB
ANDI T1,377777
USTOR T1,NBJFN,(P1) ;SAVE IT IN PLACE OF THE JFN
RETSKP ;DONE
SUBTTL .NODE - The NODE JSYS -- NDRDB - Read DECnet Data Blocks
;** Note: this function has interlocking problems. Functions pick up
;** pointers to data structures without any interlocks. The data
;** structures may go away causing ILMNRF's.
;HERE FOR FUNCTION NDRDB - READ INTERESTING DATA BLOCKS
;CALL WITH USER'S T2/ ADDRESS OF BLOCK:
; +0/ NAME OF TABLE TO BE READ
; +1/ ADDRESS OF USER'S AREA TO PUT THE DATA
; +2/ JOB NUMBER, SPECIAL, OR TTY NUMBER
; +3/ DECNET CHANNEL NUMBER, IF APPLICABLE (ELSE IGNORED)
;RETURNS +2 ON SUCCESS, +1 ON ERROR
;THIS FUNCTION RETURNS THE DESIRED TABLE.
;FIRST WORD IS THE ADDRESS OF THE TABLE, FOR FINDING RELATIVE ADDRESSES
;2ND - NTH WORDS ARE THE TABLE ITSELF
;WHEEL OR OPERATOR IS REQUIRED.
;THE KNOWN TABLES ARE: SJ (SJB), SL (SLB), EL (ELB), RC (RCB), CT (CDB).
;THE SYMBOLS TO INCLUDE IN THE CALL ARE .NDBXX (AS, .NDBSJ)
;FOR DECNET, 1ST ARG: EITHER A JOB NUMBER OR ASCIZ FOR A SPECIAL.
; THE CURRENT SPECIALS ARE "NRT", "CTM".
; 2ND ARG: (WHERE APPLICABLE) CHANNEL NUMBER
;FOR ROUTER, 1ST ARG: CIRCUIT I.D.
;FOR CTERM, 1ST ARG: TERMINAL NUMBER OF A CTERM TTY
;POSSIBLE ERRORS:
; NODX12 BAD TABLE DESIGNATOR
; NODX13 BAD 1ST ARGUMENT
; NODX14 BAD 2ND ARGUMENT
; NODX15 NO SUCH TABLE
;LOCAL PERMANENT AC USE:
; P1/ ADDRESS OF USER'S ARGUMENT BLOCK, IN USER'S CONTEXT
; P2/ 1ST ARGUMENT
; P3/ 2ND ARGUMENT
; P4/ ADDRESS OF SJB (FOR DECNET FUNCTIONS)
REPEAT 0,<
To add a new function to this JSYS:
1. Define .NDxxx in MONSYM,
2. Add a dispatch to the processing routine to RDBDSP,
3. Add the processing routine, which finds the table address and length.
>
NDRDB:
; ...
MOVE T1,CAPENB ;GET CURRENTLY ENABLED CAPABILITIES
TXNN T1,SC%WHL!SC%OPR ;DOES THE CALLER HAVE WHEEL OR OPERATOR?
RETBAD (CAPX1) ;NO - ERROR: INSUFFICIENT CAPABILITIES
SAVEAC <P1,P2,P3,P4> ;SAVE THE PERMANENT ACS
UMOVE P1,2 ;GET ADDRESS OF USER'S ARGUMENT BLOCK
;READ ARGUMENTS, RANGE CHECK TABLE INDEX, AND DISPATCH TO DO THE WORK
UMOVE T4,.NDRBT(P1) ;GET THE TABLE DESIRED
UMOVE P4,.NDRBD(P1) ;AND THE ADDRESS TO RETURN THE DATA
UMOVE P2,.NDRBJ(P1) ;AND THE DESIRED JOB
CAIL T4,0 ;DOES HE WANT A REAL TABLE?
CAILE T4,RDBDLN
RETBAD (NODX12) ;NO - ERROR
JRST @RDBDSP(T4) ;YES - DISPATCH TO DO THE WORK
;AND RETURN +1 OR +2
NRBERR: RETBAD (NODX12) ;NO - ERROR
RDBDSP: XADDR. NRBERR ;[7.1185]* USER-SUPPLIED ADDRESSES * (obsolete)
XADDR. NRBSJB ;[7.1185]SESSION JOB BLOCK
XADDR. NRBSLB ;[7.1185]SESSION LINK BLOCK
XADDR. NRBELB ;[7.1185]END-USER LAYER LINK BLOCK
XADDR. NRBERR ;[7.1185]* Used to be ROUTER circuit block *
XADDR. NRBCDB ;[7.1185]CTERM DATA BLOCK
RDBDLN==.-RDBDSP-1
;HERE TO READ THE SJB OF JOB (P2)
NRBSJB: CALL NRBGSJ ;(P2/P4) GET THE SJB ADDRESS FOR THIS JOB
RETBAD ;REPLICATE THE ERROR
MOVE T3,P4 ;SET UP THE SJB ADDRESS
MOVEI T4,SJ.LEN ;AND ITS LENGTH
JRST NRBCPD ;Go copy the data
XRESCD ;[7.1185]Better be resident while nosked...
NRBCPD: NOSKED ;Lock out scheduler
CALL NRBCPY ;(T3,T4) COPY IT TO THE USER
OKSKED ;Allow other jobs to run
RETSKP ;RETURN SUCCESS
XSWAPCD ;[7.1185]Can be swappable again..
;HERE TO READ THE SLB OF JOB (P2), USER'S CHANNEL
NRBSLB: CALL NRBGSJ ;(P2/P4) GET THE SJB ADDRESS FOR THIS JOB
RETBAD ;REPLICATE THE ERROR
CALL NRBGSL ;(P2,P3,P4/T3) GET ITS SLB ADDRESS
RETBAD ;REPLICATE THE ERROR
MOVEI T4,SL.LEN ;SET UP THE SLB'S LENGTH
JRST NRBCPD ;(T3,T4) COPY THE BLOCK AND RETURN
; ...
; ...
;HERE TO READ THE ELB OF JOB (P2), USER'S CHANNEL
NRBELB: CALL NRBGSJ ;(P2/P4) GET THE SJB ADDRESS FOR THIS JOB
RETBAD ;REPLICATE THE ERROR
CALL NRBGSL ;(P2,P3,P4/T3) GET ITS SLB ADDRESS
RETBAD ;REPLICATE THE ERROR
LOAD T3,SLPID,(T3) ;GET THE ELB ADDRESS FROM THE SLB
CAIN T3,0 ;IS THERE ONE?
RETBAD (NODX15) ;NO - ERROR - NO SUCH TABLE
MOVEI T4,EL.LEN ;SET UP THE ELB'S LENGTH
JRST NRBCPD ;(T3,T4) COPY THE BLOCK AND RETURN
;HERE TO READ THE CTERM DATA BLOCK FOR TTY (P2)
NRBCDB: MOVE T1,TT1LIN+TT.CTH ;GET NUMBER OF THE HIGHEST CTERM LINE
ADDI T1,NTTCTH
CAML P2,TT1LIN+TT.CTH ;IS THIS A LEGAL CTERM TERMINAL?
CAMLE P2,T1
RETBAD (NODX13) ;NO - ERROR - NO SUCH CTERM TERMINAL
MOVE T2,P2 ;YES - GET THE LINE NUMBER
CALLX (MSEC1,LCKTTY) ;[7.1185](T2/T2) LOCK THE TTY DYNAMIC DATA
RETBAD ;ERROR - REPLICATE IT
SKIPN T3,TTDEV(T2) ;GET ADDRESS OF CTERM DATA BLOCK - ANY?
RETBAD (NODX15) ;NO - ERROR - NO SUCH TABLE
MOVEI T4,CH.LEN ;YES - GET ITS LENGTH
;Use NRBCPY, not NRBCPD, since LCKTTY goes NOSKED.
CALL NRBCPY ;(T3,T4) COPY IT TO THE USER
CALLX (MSEC1,ULKTTY) ;[7.1185](T2) UNLOCK THE DYNAMIC DATA
RETSKP ;RETURN SUCCESS
SUBTTL .NODE - The NODE JSYS -- NDSDP - Set DECnet Initialization Parameters
;NDSDP - NODE% jsys function .NDSDP
;
; Ac2 ====) .NDPRM
; .NDVAL
; NODE%
NDSDP: MOVE T1,CAPENB ;Get enabled capabilities
TXNN T1,SC%WHL!SC%OPR ;Include WHEEL or OPERATOR?
RETBAD (CAPX1) ; -no, return error
SKIPE D36IFG ;Is DECnet already initialized?
RETBAD (NODX16) ; -yes, return error
UMOVE T2,2 ;Get address of users argument block
UMOVE T1,.NDVAL(T2) ;Get value
UMOVE T2,.NDPRM(T2) ; and parameter to set
CAIL T2,.NDRTR ;Range-check
CAILE T2,.NDFLO ; function code
RETBAD (ARGX02) ; -return error
MOVE T2,SDPTAB(T2) ;Get address to two-word entry
HLRZ T3,0(T2) ;Get minimum
HRRZ T4,0(T2) ; and maximum
CAML T1,T3 ;Range
CAMLE T1,T4 ; check value
RETBAD (NODX17) ; -bad, return error
XCT 1(T2) ;Execute instruction to set parameter
RETSKP ;Success, done
;Define SDP macro
DEFINE SDP(FUNC,MIN,MAX,INSTR) <
ASSUME FUNC,EQ,<.-SDPTAB>
[ XWD MIN,MAX
INSTR ]
>
;Define table
SDPTAB: SDP(.NDRTR,RNT.L1,RNT.NR,<STOR T1,IBRTR,+IBBLK>)
SDP(.NDMXA,^D1,^D1023,<STOR T1,IBMXA,+IBBLK>)
SDP(.NDMXB,^D1,^D500,<STOR T1,IBMXB,+IBBLK>)
SDP(.NDDBL,^D1,^D100,<STOR T1,IBDBL,+IBBLK>)
SDP(.NDBSZ,^D290,<<^D1504>-%RTEHS>,<STOR T1,IBBSZ,+IBBLK>)
SDP(.NDFLO,FCM.NO,FCM.SG,<STOR T1,IBFCM,+IBBLK>)
SUBTTL .NODE - The NODE JSYS -- NDINT - Insert Node Table
;NDINT - insert a node table
;
; Ac2/ ==) .NDNNN (Count of nodes)
; .NDNTA (Address of node table)
; ====) sixbit node name
; 16-bit node address
; (repeated .NDNNN times)
NDINT: MOVE T1,CAPENB ;Get enabled capabilities
TXNN T1,SC%WHL!SC%OPR ;Include WHEEL or OPERATOR?
RETBAD (CAPX1) ; -no, return error
SAVEAC <P1,P2> ;Save ACs we will use
UMOVE T2,2 ;Get the user argument block pointer
UMOVE P1,.NDNNN(T2) ;Get the count of nodes
UMOVE P2,.NDNTA(T2) ;Get the node table pointer
DO. ;LOOP over nodes
JUMPLE P1,ENDLP. ; Exit if all nodes done
UMOVE T1,0(P2) ; Get sixbit node name
UMOVE T2,1(P2) ; and 16-bit node address
CALL SCTAND ;[7.1185] Add the node
EXIT. ; -failed, exit loop
ADDI P2,2 ; Move address by the node
SOJA P1,TOP. ; and decrement # of nodes and loop back
ENDDO.
;Come here either when all nodes have been read (P1=0) or a failure
; to insert a node occurred (P1 .GT. 0). Return the # of nodes
; successfully processed to user in .NDNNN
UMOVE T2,2 ;Get user argument block pointer
UMOVE T1,.NDNNN(T2) ; and get # of nodes to process
SUB T1,P1 ;Subtract # of nodes left to do
UMOVEM T1,.NDNNN(T2) ; and return that
RETSKP ;Always success return
SUBTTL NTCIN - Topology Change Interrupt
;HERE TO NOTIFY INTERESTED USERS THAT LOCAL AREA TOPOLOGY HAS CHANGED
;CALL NTCIN
;RETURNS +1 ALWAYS
; RESCD ;MUST BE SO. CALLED AT SCHEDULER LEVEL.
XRENT (NTCIN,G) ;[7.1185]NTCIN::, XNTCIN::
SAVEAC <Q1>
MOVEI Q1,NTCTAB ;START LOOKING AT TOP OF TABLE
NTCIN1: SKIPN (Q1) ;IS THERE AN ENTRY?
JRST NTCIN2 ;NO. KEEP LOOKING.
LOAD T2,NTCFRK,(Q1) ;GET FORK NUMBER
LOAD T1,NTCCHN,(Q1) ;GET THE CHANNEL NUMBER
CALL PSIRQ ;INTERRUPT USER
NTCIN2: CAIE Q1,NTCTAB+<NTCMAX-1> ;DID WE SEARCH WHOLE TABLE?
AOJA Q1,NTCIN1 ;NO - CHECK NEXT ENTRY
RET
XSWAPCD ;[7.1185]
SUBTTL NDRCHK - Get Node State Parameter
;Get the value of the Node State Parameter (Reachable/Unreachable)
;from ROUTER
;
; Call:
; T1/ Node Number
;
; Return:
; +1 UNREACHABLE
; +2 REACHABLE
NDRCHK: TRVAR<<NFWBLK,NF.LST>>
STOR T1,NFEID,+NFWBLK ;Put the Node Number into the Arg block
MOVEI T1,^D2503 ;This state parameter is system specific for
STOR T1,NFPRM,+NFWBLK ; TOPS20 - needed so that I DECNET can work
; if we are running as an endnode.
MOVEI T1,.NTNOD ;Get the Node Entity Type value
STOR T1,NFETY,+NFWBLK ;Put the entity type into arg block
SETZRO NFBLN,+NFWBLK ;Make sure the rest of the block is cleared
SETZRO NFBFF,+NFWBLK
SETZRO NFBUF,+NFWBLK
SETZRO NFQUA,+NFWBLK
SETZRO NFUBF,+NFWBLK
MOVEI T1,NF.RED ;Put the Read Parameter function code into T1
XMOVEI T2,NFWBLK ;Address of the Arg Block into T2
CALL RTRNMX ;[7.1185]Ask router for the information
RET ;Error, Say it is unreachable
LOAD T1,NFBUF,+NFWBLK ;Get the parameter value back
CAIE T1,RM.REA ;Skip if node is reachable
CAIN T1,DS.ON ; of if the executor, if it is on
RETSKP ;Skip return is reachable
RET ;Non-skip return indicates Node is Unreachable
ENDTV.
SUBTTL STONOD - Store Node Name in User Space
;STONOD - ROUTINE TO STORE NODE NAME STRING IN USER SPACE
;
;ACCEPTS IN T1/ COUNT OF BYTES IN STRING
; T2/ FULL WORD POINTER TO NODE NAME (8-BIT BYTES)
; T3/ DESTINATION BYTE POINTER
; CALL STONOD
;RETURNS: +1 ALWAYS, WITH
; T3/ UPDATED DESTINATION BYTE POINTER
STONOD: SAVEAC <P1,P2,P3>
DMOVE P1,T1 ;SAVE COUNT AND POINTER
TLC T3,-1 ;IS LH OF DESTINATION PTR -1?
TLCN T3,-1
HRLI T3,(POINT 7,) ;YES, RESOLVE IT
MOVE P3,[POINT 8,(P2)] ;MAKE INDEXED BYTE POINTER TO NODE NAME
STONO1: ILDB T1,P3 ;GET A BYTE
JUMPE T1,STONO2 ;IF NULL, ALL DONE
XCTBU [IDPB T1,T3] ;STORE BYTE
SOJG P1,STONO1 ;YES - ANY MORE?
SETZ T1, ;NO, MAKE A NULL
STONO2: MOVE T2,T3 ;END THE STRING WITH A NULL
XCTBU [IDPB T1,T2]
RET ;DONE
SUBTTL NDFVY1 - Verify Parsed Node Name
;VERIFY THAT THE PARSED NODE NAME IS IN NAME MAPPING TABLE AND IS REACHABLE.
;
; T1 - BYTE POINTER TO PARSED NODE NAME IN MONITOR SPACE
; T2 - LENGTH OF THAT NODE NAME
; RETURNS +1 ALWAYS AND OKINT ; FLAGS IN T1 (ND%EXM,ND%LGL,ND%RCH,ND%RUK)
; USES T1-T4
; CALL NDVFY1
XNENT (NDVFY1,G) ;[7.1185]NDVFY1::, XNDVFY::
SAVEAC Q1
CAIG T2,^D6 ;CHECK THE BYTE COUNT
IFSKP. ;TOO LONG,
SETZ T1, ; DON'T RETURN ANY FLAGS
RET ; AND RETURN
ENDIF.
CALL <XENT PUTSIX> ;[7.1185](T1,T2/T1) CONVERT TO SIXBIT
CALLX (MSEC1,SCTN2A) ;[7.1185](T1/T1)SEE IF SCLINK KNOWS IT
IFNSK. ;DIDN'T KNOW ABOUT THE NAME,
MOVX T1,ND%LGL ; HOWEVER, IT WAS A LEGAL NAME
RET ; SO RETURN THAT FLAG
ENDIF.
LDB T2,[POINTR (T1,RN%ARE)] ; Get the area number
CAMN T2,RTRHOM ; Same as ours?
IFSKP.
MOVX T1,ND%LGL!ND%EXM!ND%RUK ; No, then node is legal, in SCLINK's
RET ; database but reachability is unknown
ENDIF.
CALL NDRCHK ;Ask ROUTER if this node is reachable
IFSKP.
MOVX T1,ND%LGL!ND%RCH!ND%EXM ; Reachable,legal, and known to SCLINK
ELSE.
MOVX T1,ND%LGL!ND%EXM ; Node is legal and in SCLINK's database
LOAD T2,IBRTR,+IBBLK ; Get routing type
CAIN T2,RNT.NR ; Endnode?
TXO T1,ND%RUK ; -then set "reachibility unknown"
ENDIF.
RET ; AND RETURN WITH FLAGS IN T1
ENDSV.
SUBTTL NRBCPY - Copy Words to User Space
;SUBROUTINE TO COPY (T4) WORDS FROM LOCATION (T3)
;TO THE USER'S LOCATION .NDRBD(P1). RETURNS +1 ALWAYS.
;NOTE: SHOULDN'T USE AC T2, BECAUSE OF LCKTTY-ULKTTY
XRESCD ;[7.1185]Called nosked
NRBCPY: UMOVE P4,.NDRBD(P1) ;GET THE PLACE TO STORE THE DATA
UMOVEM T3,(P4) ;SAVE THE TABLE ADDRESS AS THE FIRST WORD
AOJ P4, ;POINT TO THE FIRST DATA WORD
NRBCP1: MOVE T1,(T3) ;GET A WORD OF THE TABLE
UMOVEM T1,(P4) ;SAVE IT
AOJ P4, ;BUMP SOURCE AND DESTINATION POINTERS
AOJ T3,
SOJG T4,NRBCP1 ;AND LOOP THROUGH ALL THE WORDS
RET ;DONE
XSWAPCD ;[7.1185]
SUBTTL NRBGSJ - Get Job's SJB Address
;SUBROUTINE TO GET THE SJB ADDRESS FOR THIS JOB (IN P2)
;RETURNS:
; +1 ON NO-SUCH-JOB OR -TABLE ERROR
; +2 WITH P4/ SJB ADDRESS
;NOTE: THIS IS THE ONLY PLACE WHERE DECNET-RELATED FUNCTIONS NEED TO
;CHECK THE JOB NUMBER
NRBGSJ: JUMPL P2,NRBGSS ;The 'special' job # are ASCII left-justified
; and will therefore have the sign bit set...
NRBGS1: MOVE T1,P2 ;YES - MAP THE JSB FOR THIS JOB
CALLX (MSEC1,GL2LCL) ;[7.1185]Convert global job number to local
RETBAD (NODX13) ; -error, job is not active
CALLX (MSEC1,MAPJSB) ;[7.1185](/T1) (GET JSB POINTER IN T1)
RETBAD (NODX13) ;ERROR - JOB IS NOT ACTIVE
MOVE P4,JSBSJB(T1) ;GET THE ADDRESS OF THE SJB
CALLX (MSEC1,CLRJSB) ;[7.1185](T1) UN-MAP THE JSB; GO OKINT
JUMPN P4,RSKP ;RETURN WITH SJB ADDRESS, IF THERE IS ONE
RETBAD (NODX15) ;ELSE ERROR - NO SUCH TABLE
NRBGSS: CAMN P2,[ASCII /NRT/] ;ASKING FOR NRT?
JRST NRBGSN ;YES - PROCEED
CAMN P2,[ASCII /CTM/] ;ASKING FOR CTERM?
JRST NRBGSC ;YES - PROCEED
RETBAD (NODX13) ;NO - ERROR - NO SUCH JOB
NRBGSN: MOVE P4,NRTSJP ;POINT TO NRT'S SJB
RETSKP ;DONE
NRBGSC: MOVE P4,CTHSAP ;POINT TO CTERM'S SAB
LOAD P4,SASJB,(P4) ;POINT TO CTERM'S SJB
RETSKP ;DONE
SUBTTL NRBGSL - Get an SLB Address
;SUBROUTINE TO GET THE SLB ADDRESS, GIVEN THE SJB ADDRESS IN P4
;RETURNS:
; +1 ON NO-SUCH-TABLE ERROR
; +2 WITH T3/ SLB ADDRESS
NRBGSL: UMOVE P3,.NDRBC(P1) ;GET THE DESIRED CHANNEL
LOAD T2,SJCHC,(P4) ;GET THE LENGTH OF THE CHANNEL TABLE
SOSL P3 ;IS THE CHANNEL WITHIN RANGE?
CAML P3,T2
RETBAD (NODX14) ;NO - ERROR - NO SUCH CHANNEL
LOAD T3,SJCHT,(P4) ;YES - GET THE ADDRESS OF CHANNEL TABLE FROM SJB
ADD T3,P3 ;FIND THE ENTRY FOR THIS CHANNEL
SKIPE T3,(T3) ;GET IT (ADDRESS OF SLB) - IS THERE ONE?
RETSKP ;YES - RETURN IT
RETBAD (NODX15) ;NO - ERROR - NO SUCH TABLE
SUBTTL GETSIX - Copy SIXBIT Node Name
;MOVE SIXBIT NODE NAME TO BYTE POINTER
;CALL GETSIX
;T1/ SIXBIT NODE NAME
;T2/ destination byte pointer (must NOT use T1-T4,CX as index)
;returns +1
; with T1/ byte count, T2/ updated byte pointer
; and destination filled (but NOT null terminated)
;uses T1-T4
;assumes the destination can hold 6 bytes.
XNENT (GETSIX,G) ;[7.1185]GETSIX::, XGETSI::
MOVSI T4,-6 ;max count is six
MOVE T3,[POINT 6,T1] ;source
GETSX1: ILDB CX,T3 ;get next byte
JUMPE CX,GETSX2 ;if null exit.
ADDI CX,40 ;no. convert &
IDPB CX,T2 ; put it
AOBJN T4,GETSX1 ;continue if more
GETSX2: HRRZ T1,T4 ;return byte count
RET ;done.
SUBTTL PUTSIX - Convert ASCII Node Name to SIXBIT
;convert ASCII node name to SIXBIT
;CALL PUTSIX
;T1/ source byte pointer (must NOT use T1-T4,CX as index)
;T2/ source byte count
;returns +1 always with T1/ SIXBIT name
;uses T1-T4,CX
;stops on null or count, whichever comes first
XNENT (PUTSIX,G) ;[7.1185]PUTSIX::, XPUTSI::
MOVE T3,T1
MOVE T4,[POINT 6,T1] ;destination byte pointer
SETZ T1, ;the name to be
CAILE T2,6 ;max count
MOVEI T2,6 ; is six
PUTSX1: ILDB CX,T3 ;get byte
JUMPE CX,RTN ;if null, then done
CAIL CX,140 ;is this a lower case character?
TRZA CX,100 ;yes, make it SIXBIT
SUBI CX,40 ;make it SIXBIT
IDPB CX,T4 ;put byte
SOJG T2,PUTSX1 ;if more, continue.
RET
TNXEND
END