Trailing-Edge
-
PDP-10 Archives
-
bb-r775c-bm_tops20_ks_upd_3
-
sources/exec.bli
There are 10 other files named exec.bli in the archive. Click here to see a list.
%TITLE 'EXEC - enter and exit line and change mode'
MODULE EXEC ( ! Enter and Exit Line and Change Mode
IDENT = '3-007' ! File: EXEC.BLI Edit: CJG3007
) =
BEGIN
!
! COPYRIGHT (c) 1981, 1985 BY
! DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
! ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
! COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
! AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!
!++
! FACILITY: EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
! This module provides the initialization and termination
! processing for entering and exiting line and change mode.
!
! ENVIRONMENT: Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: 6-AUG-1979
!
! MODIFIED BY:
!
! 1-001 - Original. DJS 18-FEB-1981. This module was created by
! extracting routine EDT$$EXE_CMD from module EDTCTRL.
! 1-002 - Regularized the headers. JBS 24-Feb-1981
! 1-003 - Fix the file name and module name, and remove control C handling.
! JBS 04-Mar-1981
! 1-004 - Use the ASSERT macro. JBS 01-Jun-1981
! 1-005 - Don't change the current mode to line just because the change mode
! processor exits, since it now exits at the end of the journal file.
! Rearrange the looping logic to take the new recovery procedure into
! account; this means this module no longer has RCOV_MOD as an
! implicit input. Also, remove L_LINE and L_CHANGE. JBS 02-Oct-1981
! 1-006 - Don't fail to enter change mode if the terminal is unknown or hard copy.
! JBS 20-Oct-1981
! 1-007 - Take the prompt from the global rather than from a constant. JBS 21-Oct-1981
! 1-008 - Remove length of prompt string. JBS 23-Oct-1981
! 1-009 - Correct an error in a comment. JBS 17-Nov-1981
! 1-010 - Put L_LINE and L_CHANGE back TMV 7-Dec-81
! 1-011 - Add control C handling for line mode. JBS 21-Dec-1981
! 1-012 - Debug control C handling. JBS 24-Dec-1981
! 1-013 - Before returning load MACCAL into memory, in case we are returning
! to it on the PDP-11. JBS 10-Mar-1982
! 1-014 - Revise the nooverlay logic to avoid undefined symbols at build time.
! JBS 15-Mar-1982
! 1-015 - Remove the reference to EDT$$LOAD_MACCAL. JBS 18-Mar-1982
! 1-016 - Add alternative control C message. JBS 24-May-1982
! 1-017 - Remove L_LINE and L_CHANGE. JBS 03-Jun-1982
! 1-018 - Reset command buffer if ^c seen from terminal. STS 15-Jul-1982
! 1-019 - Don't clear the control C counters unless we are reading from
! a terminal. Also, treat the startup file like a macro for
! control C processing. JBS 28-Jul-1982
! 1-020 - Improve the control Z ignoring logic: don't journal ignored
! control Z's, since three in a row will be mistaken for the
! end of the journal file on a /RECOVER. JBS 29-Jul-1982
! 1-021 - Simplify the call to initialize the keypad. JBS 13-Jul-1982
! 1-022 - Clear control C if we don't have a macro. STS 06-Oct-1982
! 3-001 - Use string pointers not addresses. GB 09-Feb-1983
! 3-002 - Modify for the TOPS-20 parser. CJG Ides of March, 1983
! 3-003 - Don't need overlay code. CJG 17-Apr-1983
! 3-004 - Add updates from V3 source kit. GB 27-Apr-1983
! 3-005 - Modify to use EDT$$TI_BUFSTR for journalling. CJG 15-Jun-1983
! 3-006 - Fix incorrect journalling of multicommand lines. Only journal at the
! end of the line. CJG 10-Jan-1984
! 3-007 - Modify ASSERT macro to include error code. CJG 30-Jan-1984
!--
%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!
REQUIRE 'EDTSRC:TRAROUNAM';
FORWARD ROUTINE
EDT$$EXE_CMD : NOVALUE;
!
! INCLUDE FILES:
!
REQUIRE 'EDTSRC:EDTREQ';
!
! MACROS:
!
! NONE
!
! EQUATED SYMBOLS:
!
! NONE
!
! OWN STORAGE:
!
! NONE
!
! EXTERNAL REFERENCES:
!
! In the routine
%SBTTL 'EDT$$EXE_CMD - execute commands'
GLOBAL ROUTINE EDT$$EXE_CMD ( ! Execute commands
SOURCE ! New input source
) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!
! Enter and exit line and change mode.
!
! FORMAL PARAMETERS:
!
! SOURCE new input source
!
! IMPLICIT INPUTS:
!
! TRN_TBLINIT
! CMD_BUF
! CMD_LEN
! EXITD
! EDIT_MOD
! TI_TYP
! TXT_ONSCR
! PA_STK
! PA_MORE
! VT52_KTBL
! VT100_KTBL
! PMT_LINE
! CC_DONE
!
! IMPLICIT OUTPUTS:
!
! INP_SRC
! CMD_PTR
! TXT_ONSCR
!
! ROUTINE VALUE:
!
! 0 - We have seen an EXIT command; EXITD will be set
! 1 - We have reached end of file.
! 2 - We saw a control C
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
EXTERNAL ROUTINE
EDT$$TI_BUFSTR : NOVALUE, ! Write a line to journal buffer
EDT$$DEF_DFLTK, ! Define default keys
EDT$$CHM_EXE, ! Execute change mode commands
EDT$$GET_LN, ! Read a line of input
EDT$$PA_CMD, ! Parse a command
EDT$$LNM_CMD, ! Execute a line mode command
EDT$$CHK_CC, ! Check for control C
EDT$$MSG_TOSTR : NOVALUE, ! Convert a message code to a string
EDT$$OUT_FMTBUF : NOVALUE, ! Print the format buffer
EDT$$CLR_CC : NOVALUE, ! Clear control C flag
EDT$$FMT_CRLF : NOVALUE; ! End of output line
EXTERNAL
TRN_TBLINIT, ! Translate table init flag
CMD_END, ! Pointer to end of command
CMD_BUF, ! Command line buffer
CMD_PTR, ! Pointer into command line buffer
CMD_LEN, ! Length of current command
EXITD, ! Did we exit with the last command?
INP_SRC, ! Source of input commands
EDIT_MOD, ! Current editing mode
TXT_ONSCR, ! Text was written to screen
PA_STK, ! Parser semantic stack
PA_MORE, ! More input on current line
PMT_LINE : VECTOR, ! Counted ASCII string of line-mode prompt
CC_DONE, ! Set if control C actually aborted anything
TIN_OBUFPOS, ! Current length of journal record
JOU_VALID; ! Set to 1 if there is a record in the journal buffer
!+
! Specify the messages used in this routine.
!-
MESSAGES ((ABOBYCC, CTRC__IGN));
LOCAL
STATUS,
SAVE_SOURCE,
EOF_FLAG; ! 1 = reached end of file, 2 = control C
!+
! If we are not coming from the terminal but a control C has been typed, get out now.
!-
IF ((.INP_SRC NEQ INP_TERM) AND (.INP_SRC NEQ INP_JOURNAL))
THEN
IF EDT$$CHK_CC ()
THEN
BEGIN
CC_DONE = 1;
RETURN (2);
END;
SAVE_SOURCE = .INP_SRC;
INP_SRC = .SOURCE;
CMD_PTR = CH$PTR (CMD_BUF,, BYTE_SIZE);
PA_MORE = 0;
EOF_FLAG = 0;
WHILE ((.EOF_FLAG EQL 0) AND ( NOT .EXITD)) DO
IF (.EDIT_MOD EQL CHANGE_MODE)
THEN
!+
! We are in change mode, go into the change mode processor.
!-
BEGIN
!+
! Init the keypad translation table if necessary.
! If the initialization fails, drop into line mode.
!-
STATUS = 1;
IF ( NOT .TRN_TBLINIT) THEN STATUS = EDT$$DEF_DFLTK ();
IF (.STATUS EQL 1)
THEN
EOF_FLAG = EDT$$CHM_EXE ()
ELSE
BEGIN
EDT$$MSG_TOSTR (.STATUS);
EDT$$FMT_CRLF ();
EDIT_MOD = LINE_MODE;
END;
!+
! EDT$$CHM_EXE returns after a series of commands. It returns on the EXIT
! command (which sets EDIT_MOD to LINE_MODE) and at the end of the
! journal file. In the latter case it returns a 1; if it returns because
! of exiting it returns a 0.
!-
END
ELSE
BEGIN
IF (.INP_SRC NEQ INP_MACRO) THEN EDT$$CLR_CC ();
ASSERT (2, .EDIT_MOD EQL LINE_MODE); ! We are in line mode
!+
! See if we must read a line.
!-
IF (.PA_MORE EQL 0) THEN
BEGIN
WHILE ((EDT$$GET_LN (1, PMT_LINE [1], .PMT_LINE [0]) NEQ 0) AND ( NOT .EOF_FLAG))
DO
BEGIN
IF (.INP_SRC NEQ INP_TERM)
THEN
EOF_FLAG = 1
ELSE
BEGIN
!+
! This is an EOF from the terminal, invalidate the journal buffer.
! If we journal this it may be confused with the end of the journal file.
!-
TIN_OBUFPOS = 0;
JOU_VALID = 0;
END;
END;
END;
!+
! Parse and execute the command. (Unless it is a comment or we have reached EOF.)
!-
IF ( NOT .EOF_FLAG)
THEN
BEGIN
STATUS = EDT$$PA_CMD (CH$PTR (PMT_LINE [1],, BYTE_SIZE),
(IF (.INP_SRC EQL INP_TERM)
THEN .PMT_LINE [0]
ELSE 0));
!+
! Write the command to the journal file
!-
IF ((.INP_SRC EQL INP_TERM) AND (.PA_MORE EQL 0)) THEN
BEGIN
EDT$$TI_BUFSTR (CH$PTR (CMD_BUF,, BYTE_SIZE), .CMD_LEN - 2);
JOU_VALID = 1;
END;
IF .STATUS THEN
EDT$$LNM_CMD (PA_STK)
ELSE
TXT_ONSCR = .TXT_ONSCR + 1;
!+
! If the control C flag is set, it is likely that the command was aborted
! by a control C.
!-
IF EDT$$CHK_CC ()
THEN
BEGIN
IF ((.INP_SRC EQL INP_TERM) OR (.INP_SRC EQL INP_JOURNAL))
THEN
BEGIN
IF CH$PTR_NEQ (.CMD_PTR, CH$PTR (CMD_BUF,, BYTE_SIZE))
THEN
CC_DONE = 1;
IF (.CC_DONE)
THEN
EDT$$MSG_TOSTR (EDT$_ABOBYCC)
ELSE
EDT$$MSG_TOSTR (EDT$_CTRC__IGN);
EDT$$OUT_FMTBUF ();
!+
! We've seen a control C from the terminal, so clear out the command buffer.
!-
CMD_PTR = CH$PTR (CMD_BUF,, BYTE_SIZE);
CMD_END = .CMD_PTR;
! CH$WCHAR (%C'!', .CMD_END);
END
ELSE
!+
! We have seen a control C but we are not reading from the terminal. Return to our caller, who
! will arrange to print an appropriate message.
!-
BEGIN
CC_DONE = 1;
EOF_FLAG = 2;
END;
END;
END;
END;
!+
! When the loop falls through we have either reached an end of file or
! seen an EXIT command. Tell the caller which.
!-
INP_SRC = .SAVE_SOURCE;
RETURN (.EOF_FLAG);
END;
END
ELUDOM