Trailing-Edge
-
PDP-10 Archives
-
bb-r775c-bm_tops20_ks_upd_3
-
sources/posgen.bli
There are 21 other files named posgen.bli in the archive. Click here to see a list.
%TITLE 'DIX positional interface-specific pieces'
! COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1983, 1985.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND
! COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
! THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR
! ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
! AVAILABLE TO ANY OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE
! SOFTWARE IS HEREBY TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
! NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
! EQUIPMENT CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF
! ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
MODULE POSGEN ! \.hl 1 \
!++
! .chapter >POSGEN
!
! This file contains many modules which contribute to the positional
! user interfaces to the Data Conversion Routines on various systems.
! The separate modules are used to facilitate automatic loading of the
! minimal subset of these routines needed to perform the conversions
! that the user actually invokes. This can be important on systems
! that do not use extended addressing.
!--
(
IDENT = '2.0(134)' ! \.P;
! **EDIT**
%REQUIRE ('DILSWI.REQ') ! [%O'73']
%BLISS36 (
, ENTRY ( ! ; .P;Entry names:
CVGEN, XDESCR
) !
)
) =
BEGIN
!++
! .hl 1 Debugging declarations
!--
!++
! .hl 1 Require files
!--
REQUIRE 'dixreq'; ! \.P;
%sbttl 'Edit History' ! [8] Add this entire subsection
!++
! .hl 1 Edit History
!--
LIBRARY 'VERSION';
! ; .autotable
!++ COPY
new_version (1, 0)
edit (8, '23-Aug-82', 'David Dyer-Bennet')
%( Change version and revision standards everywhere.
Files: All. )%
edit (10, '22-Sep-82', 'David Dyer-Bennet')
%( Always use long_relative addressing on VAX. )%
Edit (11, '27-Sep-82', 'David Dyer-Bennet')
%( Use ARGADR to access dix$by_dix_des arguments.
Files: POSGEN.BLI )%
Edit (%O'46', '19-Jan-83', 'David Dyer-Bennet')
%( Update copyright notice, mark end of edit histories.
)%
Edit (%O'73', '19-May-83', 'David Dyer-Bennet')
%( Add DILSWI require file to headings of all modules. DILSWI
contains the BLISS32 addressing-mode declarations and the TOPS-10
OTS declaration to avoid invoking the losing default of .REQUESTING
the OTS library from whatever directory the compiler was called from
when the build ran.
)%
Edit (%O'74', '8-June-83', 'Charlotte L. Richardson')
%( Declare version 1 complete. All modules.
)%
new_version (1, 1)
new_version (2, 0)
Edit (%O'75', '12-Apr-84', 'Sandy Clemens')
%( Put all Version 2 DIL development files under edit control. Some
of the files listed below have major code edits, or are new
modules. Others have relatively minor changes, such as cleaning
up a comment.
FILES: COMPDL.CTL, DIL.RNH, DIL2VAX.CTL, DILBLD.10-MIC,
DILHST.BLI, DILINT.BLI, DILOLB.VAX-COM, DILV6.FOR, DILV7.FOR,
INTERFILS.CTL, MAKDIL.CTL, MASTER-DIL.CMD, POS20.BLI, POSGEN.BLI,
DLCM10.10-CTL, DLMK10.10-CTL
)%
Edit (%O'134', '8-Oct-84', 'Sandy Clemens')
%( Add new format of COPYRIGHT notice. FILES: ALL )%
! **EDIT**
!-- .autoparagraph
mark_versions ('DIL')
!++
! .hl 1 OWN storage
!--
! [8] Remove version number word
!++
! .hl 1 External References
!--
EXTERNAL ROUTINE ! \.P;\:
! ;.list 0, "o"
!++ Copy /strip .le;
dil$$usr_intrfc_hand,
dix$$con_gen,
dil$$return_kludge,
dix$$des_by_det;
!-- .end list
%IF %BLISS (BLISS36) %THEN ! .HL 2 If BLISS36
EXTERNAL ROUTINE ! \.p;\:
! ;.list 0, "o"
!++ copy /strip .le;
dix$$get_argadr
!-- .end list
;
%FI
%SBTTL 'GLOBAL ROUTINE dix$mak_des_det'
GLOBAL ROUTINE dix$mak_des_det ! \.!=;.hl 1 \
! ; .index dix$mak_des_det
!++
! Make A DIX Field Descriptor From Fixed Parameter List
!
! SCH: Level = 1, DD = 1. Pseudonym >xdescr>. User interface routine.
!
! Algorithm: This interface routine simply passes the supplied
! parameters on to DIX$$DES_BY_DET, which does the work.
!
! The argument checking for descriptor making is performed in the next
! routine down: dix$$des_by_det. This is an exception to the general rule
! about arguement checking.
!
! Side effects / implicit arguments:
! The return_kludge is used.
!
! Routine Value:
! Status value, one of the following (this list is inclusive, not exclusive):
! .list 0, "o"
! .le;dix$_invdattyp ! Class or type within class invalid
! .le;dix$_invlng ! Length invalid for type specified
! .le;dix$_invscal ! Scale invalid for type specified
! .le;dix$_unksys ! Unknown system of origin
! .le;dix$_invbytsiz ! Invalid byte size
! .le;dix$_align ! Invalid original-system alignment
! .end list
!
! Formal arguments:
!--
( ! ; .s 1.list 1
res_ffd, ! \.le;\: (by reference, written)
! ; The DIX descriptor to be produced
con_rec, ! \.le;\: (by reference) The record
! ; in which the field exists. Must be unit-aligned.
sys_orig, ! \.le;\: (integer) The code for
! ; the system of origin of the record
byt_siz, ! \.le;\: (integer) The byte size to
! ; interpret the offset in
byt_off, ! \.le;\: (integer) The offset to the
! ; field in the record, in bytes (as
! ; defined above)
bit_off, ! \.le;\: (integer) The bit offset to
! ; the field within the selected byte
dat_typ, ! \.le;\: (integer) The code for the
! ; data type of the field
fld_lng, ! \.le;\: (integer) The length of the
! ; field in the natural units for the data type (value ignored if field
! ; is not variable length)
scal_fac ! \.le;\: (integer) The scale factor
! ; of the field if it is a fixed-point binary or display-numeric
! ; field (including packed decimal)
) : ! ; .end list
FORTRAN_FUNC = ! \.P;Use \ Linkage
BEGIN
LOCAL
error_temp : VOLATILE; ! Used by condition handler only
ENABLE ! \.P;\
dil$$usr_intrfc_hand (error_temp); ! \\Standard condition handler
! for user interface routines
dil$$return_kludge (dix$$des_by_det (argadr (.res_ffd),
argadr (.con_rec), .(argadr (.sys_orig)),
.(argadr (.byt_siz)), .(argadr (.byt_off)),
.(argadr (.bit_off)), .(argadr (.dat_typ)),
.(argadr (.fld_lng)), .(argadr (.scal_fac)))) ! Pass status value upwards
END; ! END OF DIX$MAK_DES_DET
%SBTTL 'GLOBAL ROUTINE dix$by_det'
GLOBAL ROUTINE dix$by_det ! \.!=;.hl 1 \
! ; .index dix$by_det
!++
! Convert all data types from fixed parameter list
!
! SCH: Level = 1. DD = 1. Pseudonym >cvgen>. User interfacr routine.
!
! This routine uses a positional parameter list. The use of a
! positional parameter list makes it easier to write application
! programs layered on top of the DIX.
!
! This routine will perform any conversion supported by the DIX package.
!
! Algorithm: Call DIX$$DES_BY_DET to make descriptors, then portal
! DIX$$CON_GEN.
!
! Note that passing a field as the record and specifying both offsets as
! zero allows you to pass a bare field to CVGEN.
!
! This interface routine is part of both the DEC-10/20 Positional and
! the DEC-10/20 Non-Positional interfaces.
!
! Routine value: Status value
! .list
! .le;dix$_rounded
! .le;dix$_toobig
! .le;dix$_invdattyp
! .le;dix$_unkargtyp
! .le;dix$_unksys
! .le;dix$_invlng
! .le;dix$_invscal
! .le;dix$_graphic
! .le;dix$_fmtlost
! .le;dix$_nonprint
! .le;dix$_trunc
! .le;dix$_unimp
! .le;dix$_invalchar
! .le;dix$_align
! .le;dix$_unnorm
! .le;dix$_impossible
! .le;dix$_unsigned
! .le;dix$_invbytsiz
! .le;dix$_invdnumchr
! .le;dix$_invdnumsgn
! .le;dix$_invpddgt
! .le;dix$_invpdsgn
! .end list
!
! Formal arguments:
!--
(
! ; .p;Source:
! ; .s 1.list 1
src_rec, ! \.le;\: Record (use argadr; may be descriptor)
src_sys, ! \.le;\: Adr of system code
src_byt_siz, ! \.le;\: adr of byte size
src_byt_off, ! \.le;\: adr of byte offset
src_bit_off, ! \.le;\: adr of bit offset
src_dat_typ, ! \.le;\: adr of data type
src_lng, ! \.le;\: adr of length
src_scal_fac, ! \.le;\: adr of scale factor
! ; .end list
! ; .P; Destination:
! ; .list 1
dst_rec, ! \.le;\: Record (use argadr; may be descriptor)
dst_sys, ! \.le;\: Adr of system code
dst_byt_siz, ! \.le;\: adr of byte size
dst_byt_off, ! \.le;\: adr of byte offset
dst_bit_off, ! \.le;\: adr of bit offset
dst_dat_typ, ! \.le;\: adr of data type
dst_lng, ! \.le;\: adr of length
dst_scal_fac ! \.le;\: adr of scale factor
) : ! ;.end list
FORTRAN_FUNC = ! \.p;Use \ linkage
BEGIN ! dix$by_det
LOCAL
src_ffd : forgn_descr,
dst_ffd : forgn_descr,
handler_temp : VOLATILE,
temp_status : condition_value;
ENABLE ! \.p;\
dil$$usr_intrfc_hand (handler_temp); ! \
! ; .HL 3 Flow of code
!++
! Make a descriptor (in local storage) for the source and destination
! fields.
!--
temp_status = dix$$des_by_det (src_ffd,
argadr (.src_rec), .(argadr (.src_sys)),
.(argadr (.src_byt_siz)), .(argadr (.src_byt_off)),
.(argadr (.src_bit_off)), .(argadr (.src_dat_typ)),
.(argadr (.src_lng)), .(argadr (.src_scal_fac)));
IF NOT .temp_status [sts$v_success] THEN RETURN dil$$return_kludge (.temp_status);
temp_status = dix$$des_by_det (dst_ffd,
argadr (.dst_rec), .(argadr (.dst_sys)),
.(argadr (.dst_byt_siz)), .(argadr (.dst_byt_off)),
.(argadr (.dst_bit_off)), .(argadr (.dst_dat_typ)),
.(argadr (.dst_lng)), .(argadr (.dst_scal_fac)));
IF NOT .temp_status [sts$v_success] THEN RETURN dil$$return_kludge (.temp_status);
!++
! Perform the indicated conversion.
!--
dil$$return_kludge (dix$$con_gen (src_ffd, dst_ffd)) ! ; Return the status value.
END; ! dix$by_det
%SBTTL 'GLOBAL ROUTINE DIX$BY_DIX_DES'
GLOBAL ROUTINE dix$by_dix_des ! \.!=;.hl 1 \
! ; .index dix$by_dix_des
!++
! Convert all types by descriptor
!
! SCH: Level = 1, DD = 1. Pseudonym >xcgen>. User interface routine.
!
! Algorithm: This interface routine simply passes its arguments on in
! proper form to >DIX$$CON_GEN>, which dispatches to the conversion
! routines necessary.
!
! Routine value:
! .list
! .le;dix$_rounded
! .le;dix$_toobig
! .le;dix$_invdattyp
! .le;dix$_unkargtyp
! .le;dix$_unksys
! .le;dix$_invlng
! .le;dix$_invscal
! .le;dix$_graphic
! .le;dix$_fmtlost
! .le;dix$_nonprint
! .le;dix$_trunc
! .le;dix$_unimp
! .le;dix$_invalchar
! .le;dix$_align
! .le;dix$_unnorm
! .le;dix$_impossible
! .le;dix$_unsigned
! .le;dix$_invbytsiz
! .le;dix$_invdnumchr
! .le;dix$_invdnumsgn
! .le;dix$_invpddgt
! .le;dix$_invpdsgn
! .end list
!
! Formal arguments:
! .s 1
! .list 1
!--
(
src_ffd, ! \.le;\: Adr of FFD for source field
dst_ffd ! \.le;\: Adr of FFD for destination field
) : FORTRAN_FUNC = ! ; .END LIST
BEGIN ! routine dix$by_dix_des
MAP
src_ffd: REF forgn_descr,
dst_ffd: REF forgn_descr;
LOCAL
temp_status: condition_value,
handler_temp : VOLATILE;
ENABLE ! \.P;
dil$$usr_intrfc_hand (handler_temp); ! \
dil$$return_kludge (dix$$con_gen (argadr (.src_ffd), ! [11]
argadr (.dst_ffd))) ! [11]
END; ! routine dix$by_dix_des
END ! MODULE POSGEN
ELUDOM