Trailing-Edge
-
PDP-10 Archives
-
bb-r775c-bm_tops20_ks_upd_3
-
sources/scrcurs.bli
There are 10 other files named scrcurs.bli in the archive. Click here to see a list.
%TITLE 'SCRCURS - conditionally position the cursor'
MODULE SCRCURS ( ! Conditionally position the cursor
IDENT = '3-004' ! File: SCRCURS.BLI Edit: CJG3004
) =
BEGIN
!
! COPYRIGHT (c) 1981, 1985 BY
! DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
! ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
! COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
! AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!
!++
! FACILITY: EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
! This module puts out a cursor position sequence to a specified
! line and column, unless the cursor is already there.
!
! ENVIRONMENT: Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: September 8, 1979
!
! MODIFIED BY:
!
! 1-001 - Original. DJS 12-Feb-1981. This module was created by
! extracting the routine EDT$$SC_POSCSIF from module SCREEN.
! 1-002 - Regularize headers and don't store into the parameter list. This
! change saved two words on the PDP-11. JBS 13-Mar-1981
! 1-003 - Always position to the last column, to avoid autowrap problems.
! JBS 15-Apr-1982
! 1-004 - Remove edit 1-003, since it doesn't help a VT100, and add some
! cursor positioning optimizations. For now, turn off the cursor
! positioning optimizations, until EDT passes the QA system. JBS 05-Oct-1982
! 1-005 - Turn the cursor positioning optimizations on, to see if EDT still
! passes the QA system. JBS 15-Oct-1982
! 1-006 - When positioning below the scrolling region don't use the
! relative cursor motion commands. JBS 15-Oct-1982
! 1-007 - Fix a bug involving BS. JBS 17-Oct-1982
! 1-008 - For dumb terminal drivers, always use absolute cursor positioning.
! JBS 17-Oct-1982
! 1-009 - Preserve EDT$$G_FMT_LNPOS. JBS 28-Oct-1982
! 1-010 - Changed test for being outside scrolling region. JBS for SB 17-Jan-1983
! 1-011 - Add more error checking. JBS 17-Jan-1983
! 3-002 - Fix a problem when the cursor is expected to be at the right
! margin but is actually one place beyond. This happens when SET
! TRUNCATE and SET SCREEN N<80 are in effect. If the screen width
! is set to 80 or 132 then all is OK. CJG 6-Jan-1984
! 3-003 - Add a bit more to 3-002. CJG 12-Jan-1984
! 3-004 - Modify ASSERT macro to include error code. CJG 30-Jan-1984
!--
%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!
REQUIRE 'EDTSRC:TRAROUNAM';
FORWARD ROUTINE
EDT$$SC_POSCSIF : NOVALUE;
!
! INCLUDE FILES:
!
REQUIRE 'EDTSRC:EDTREQ';
!
! MACROS:
!
! NONE
!
! EQUATED SYMBOLS:
!
! NONE
!
! OWN STORAGE:
!
! NONE
!
! EXTERNAL REFERENCES:
!
! In the routine
%SBTTL 'EDT$$SC_POSCSIF - conditionally position the cursor'
GLOBAL ROUTINE EDT$$SC_POSCSIF ( ! Conditionally position the cursor
LINE, ! Desired line
POS ! Desired column
) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!
! This routine positions the cursor to [LINE, POS]. No output is
! produced if the cursor is already positioned correctly.
!
! FORMAL PARAMETERS:
!
! LINE Desired line
!
! POS Desired column
!
! IMPLICIT INPUTS:
!
! PRV_LN
! PRV_COL
! BOT_SCREG
! TI_DUMB
!
! IMPLICIT OUTPUTS:
!
! NONE
!
! ROUTINE VALUE:
!
! NONE
!
! SIDE EFFECTS:
!
! May position the cursor.
!
!--
BEGIN
EXTERNAL ROUTINE
EDT$$SC_POSABS : NOVALUE, ! Force a cursor position sequence to the output buffer
EDT$$STORE_FMTCH : NOVALUE, ! Store a character in the format buffer
EDT$$FMT_DCML : NOVALUE; ! Place a decimal number in the format buffer
EXTERNAL
BOT_SCREG, ! Bottom of current scrolling region
PRV_LN, ! Previous line number
PRV_COL, ! Previous column number
TI_TYP, ! Terminal type, either VT52 or VT100
TI_DUMB, ! 1 = this is a dumb terminal driver
TI_WID, ! Terminal defined width
FMT_LNPOS; ! Cursor position, for formatting purposes.
LOCAL
SAVE_FMTLNPOS;
ASSERT (21, .LINE GEQ 0);
!+
! Preserve FMT_LNPOS, since the calls to EDT$$FMT_DCML will increment it,
! but those characters do not in fact move the cursor, since they are in a control sequence.
!-
SAVE_FMTLNPOS = .FMT_LNPOS;
!+
! If this is a dumb terminal driver, always use absolute cursor positioning
!-
IF .TI_DUMB
THEN
IF ((.LINE NEQ .PRV_LN) OR (.POS NEQ .PRV_COL)) !
THEN
EDT$$SC_POSABS (.LINE, .POS);
!+
! If the desired column is zero, but the current column is non-zero, issue a
! carriage return.
!-
IF ((.POS EQL 0) AND (.POS NEQ .PRV_COL))
THEN
BEGIN
EDT$$STORE_FMTCH (ASC_K_CR);
PRV_COL = 0;
END;
!+
! If we are positioning below the scrolling region, issue an absolute cursor position.
!-
IF ((.LINE + 1) GEQ .BOT_SCREG) THEN EDT$$SC_POSABS (.LINE, .POS);
!+
! If the column is correct but the row is incorrect, issue an appropriate
! sequence.
!-
IF ((.POS EQL .PRV_COL) AND (.LINE NEQ .PRV_LN))
THEN
BEGIN
!+
! If we are moving down one, issue a line feed.
!-
IF (.LINE EQL (.PRV_LN + 1))
THEN
BEGIN
EDT$$STORE_FMTCH (ASC_K_LF);
PRV_LN = .PRV_LN + 1;
END
ELSE
!+
! Otherwise issue an appropriate relative cursor motion command. Note that the VT52
! can only move by one.
!-
IF ((.TI_TYP EQL TERM_VT100) OR (ABS (.LINE - .PRV_LN) EQL 1))
THEN
BEGIN
EDT$$STORE_FMTCH (ASC_K_ESC);
IF (.TI_TYP EQL TERM_VT100) THEN EDT$$STORE_FMTCH (%C'[');
IF (.LINE LSS .PRV_LN)
THEN
BEGIN
IF ((.PRV_LN - .LINE) NEQ 1) THEN EDT$$FMT_DCML (.PRV_LN - .LINE);
EDT$$STORE_FMTCH (%C'A');
PRV_LN = .LINE;
PRV^AOL = .POS;
END
ELSE
BEGIN
EDT$$FMT_DCML (.LINE - .PRV_LN);
EDT$$STORE_FMTCH (%C'B');
PRV_LN = .LINE;
PRV_COL = .POS;
END;
END;
END;
!+
! Now check for moving left or right. Note again that the VT52 can only
! move by one.
!-
IF ((.POS NEQ .PRV_COL) AND (.LINE EQL .PRV_LN))
THEN
BEGIN
!+
! If we are just going back one, use BS.
!-
IF (.POS EQL (.PRV_COL - 1))
THEN
BEGIN
IF ((.PRV_COL NEQ 80) AND (.PRV_COL NEQ 132))
THEN
EDT$$STORE_FMTCH (ASC_K_BS);
PRV_COL = .PRV_COL - 1;
END
ELSE
IF ((.TI_TYP EQL TERM_VT100) OR (ABS (.POS - .PRV_COL) EQL 1))
THEN
BEGIN
!+
! Otherwise, use a relative cursor motion command.
!-
EDT$$STORE_FMTCH (ASC_K_ESC);
IF (.TI_TYP EQL TERM_VT100) THEN EDT$$STORE_FMTCH (%C'[');
IF (.POS LSS .PRV_COL)
THEN
BEGIN
LOCAL
DISP;
!+
! If we are sitting just past the last logical column and the width is not
! 80 or 132 then correct the displacement.
!-
DISP = .PRV_COL - .POS;
IF ((.PRV_COL EQL .TI_WID) AND ((.TI_WID EQL 80) OR (.TI_WID EQL 132)))
THEN
DISP = .DISP - 1;
EDT$$FMT_DCML (.DISP);
EDT$$STORE_FMTCH (%C'D');
PRV_COL = .POS;
END
ELSE
BEGIN
IF ((.POS - .PRV_COL) NEQ 1) THEN EDT$$FMT_DCML (.POS - .PRV_COL);
EDT$$STORE_FMTCH (%C'C');
PRV_COL = .POS;
END;
END;
END;
!+
! If both the column and line need to be changed, and if the desired
! column is not zero, issue an absolute cursor positioning command.
!-
IF ((.LINE NEQ .PRV_LN) OR (.POS NEQ .PRV_COL)) !
THEN
EDT$$SC_POSABS (.LINE, .POS);
!+
! Restore the format line position.
!-
FMT_LNPOS = .SAVE_FMTLNPOS;
END; ! of routine EDT$$SC_POSCSIF
!<BLF/PAGE>
END ! of module EDT$SCRCURS
ELUDOM