Trailing-Edge
-
PDP-10 Archives
-
bb-x130a-sb
-
sedtty.mac
There are 10 other files named sedtty.mac in the archive. Click here to see a list.
TITLE SEDTTY - COMBINED TERMINAL DEFINITION FILE FOR SED
SUBTTL A CHRISTOPHER HALL FECIT
;COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1979,1983.
SEARCH SEDSYM
IFN TOPS10,<SEARCH UUOSYM>
IFE TOPS10,<SEARCH MONSYM>
;NOTE: SEDTTY combines all the terminal tables (which were formerly
;distributed separately) into one file. The tables for each terminal
;can be enabled individually by setting a flag below. If two or more
;terminals are enabled, code will also be set up which asks the monitor
;what type of terminal it is and/or processes the /Z: terminal name
;switch (if there's only one terminal type, no decisions have to be
;made, so that decision code does not assemble).
;CAVAET: Most of the tables here are not up to date, some are of
;questionable reliability, and some define different arrangements of
;SED commands on the keyboard. That is because many tables were sent to
;me by sites who had those terminals, and I distribute them as I
;receive them. New tables or updates or corrections to these tables
;will be gratefully accepted and incorporated into this file. so PLEASE
;look over the tables you want to enable to make sure they do what you
;want them to. The terminal tables, not the documentation, are the
;final authority on which keystrokes invoke which commands.
;The only tables I can guarantee to be up-to-date are those for the DEC
;VT52 and VT100 family of terminals. I use those terminals every day.
;To add a new terminal:
;(see SED.MEM for a complete description of each table)
;1) Invent names for the terminal:
; NAME5 (VT100) - 5-character (or less) name used to build labels
; NAM4 (V100) - 4-character name ditto
; NM3 (V10) - 3-character name ditto
; TNAME (VT100) - Name to call the terminal. Used with the /Z: switch.
; This is the name returned by TRMOP. on TOPS-20,
; or set up in the T20NAM table [see below] on TOPS-20.
;2) Add a switch to the list below (format must be F'NAME5).
;3) Add "GOTERM('NAME5)" to the list at termnl (alphabetical is nice
; but unnecessary).
;4) Add to CRTTAB: the SIXBIT terminal name (TNAME), under the switch
; (F'NAME5).
;5) Add the terminal tables under feature test switch F'NAME5.
;6) If TOPS20, add TNAME to T20NAM: at the position of the index returned
; from GTTYP (NOTE: The name in T20NAM must match name in CRTTAB in the
; monitor).
; NOTE: Every terminal must have an entry routine. The routine must begin
; with the line "IFN ..IDX-1,<JRST DECIDE>" and end with "POPJ P,".
;NAMING CONVENTIONS:
;A number of labels or flags can be found in every terminal table. To avoid
;duplication, they should be named as described below. Similar labels not
;listed here should follow the same conventions. The intention is that if
;sedtty is assembled with all terminals on (all the F'NAME5==1), there will
;be no duplicate labels.
;O'NAME5 Address of terminal output table
;I'NAME5 Address of terminal input table
;C'NAME5 Address of routine to position cursor to given ROW, COLUMN
;L'NAME5 Address of routine to position to start of line
;E'NAME5 Address of entry routine
;X'NAME5 Address of exit routine
;S'NM3'.T Address of terminal subtable (Example: SV52.T)
;S'NM3'.S Length of terminal subtable (Example: SV52.S)
;F'NAM4'F Fast-terminal flag (set if terminal sends XOFF-XON)
;F'NAM4'X Some other terminal-dependent flag
;FLAGS TO ENABLE EACH TERMINAL TABLE.
;SET VALUE TO 1 IF YOU WANT SED TO RUN ON THAT TERMINAL
FAD100==0 ;ADDS REGENT 100
FADM2==0 ;ADM2
FADM31==0 ;ADM-31
FADM3A==0 ;ADM-3A
FANARB==0 ;ANN ARBOR
FBEHIV==0 ;BEEHIVE B100
FDM3K==0 ;DATAMEDIA 3000
FDM152==0 ;DATAMEDIA 1520/1521
FDMELT==0 ;DATAMEDIA ELITE
FDDISK==0 ;DATA DISK
FGIGI==1 ;GIGI (VK100)
FH1500==0 ;HAZELTINE 1500
FZEH19==0 ;ZENITH H19
FMEM2A==0 ;MIME 2A
FONTEL==0 ;ONTEL SUGARMAN
FIQ120==0 ;SOROC IQ 120
FT4041==0 ;TELRAY 4041
FVT52==1 ;DIGITAL VT52
FVT61==1 ;DIGITAL VT61
FVT100==1 ;DIGITAL VT100
FVT102==1 ;DIGITAL VT102
FVT125==1 ;DIGITAL VT125
FVI200==0 ;VISUAL 200
FVIEWP==0 ;ADDS VIEWPOINT
;IF A FLAG ABOVE IS ON THIS MACRO PUTS THE ADDRESS OF THAT TERMINAL'S OUTPUT
;TABLE AT THE END OF THE LIST AT TERMNL AND ASSIGNS THE INDEX IN TERMNL TO
;X'NAME. FOR EXAMPLE, IF THE TERMINAL IS THE VT52, ITS NAME IS VT52, AND ITS
;TABLE ADDRESS IS OVT52.
;TERMINAL NAMES MUST BE NO LONGER THAN 5 CHARACTERS.
DEFINE GOTERM(NAME),<
IFN F'NAME,<
IF2,<PRINTX [SED will include support for 'NAME terminals]>
..IDX=..IDX+1
O'NAME>
>
..IDX==0
TERMNL::GOTERM AD100 ;ADDRESSES OF THE TERMINAL TABLES TO USE
GOTERM ADM2
GOTERM ADM31
GOTERM ADM3A
GOTERM ANARB
GOTERM BEHIV
GOTERM DM3K
GOTERM DM152
GOTERM DDISK
GOTERM DMELT
GOTERM GIGI
GOTERM H1500
GOTERM ZEH19
GOTERM MEM2A
GOTERM ONTEL
GOTERM IQ120
GOTERM T4041
GOTERM VT52
GOTERM VT61
GOTERM VT100
GOTERM VT102
GOTERM VT125
GOTERM VI200
GOTERM VIEWP
IFE ..IDX,<PRINTX ?No terminals are turned on for SED>
;IF THERE'S ONLY ONE TERMINAL TYPE, NO DECISIONS HAVE TO BE MADE.
;SO IF ..IDX IS 1 DON'T GENERATE THESE TABLES AND THE DECISION CODE.
IFN ..IDX-1,<
;SED-INTERNAL NAMES OF TERMINALS. USED BY THE /Z: SWITCH
;AND TO MATCH THE TERMINAL NAME RETURNED FROM THE MONITOR
CRTTAB:
IFN FAD100,<SIXBIT /AD100/>
IFN FADM2, <SIXBIT /ADM2/>
IFN FADM31,<SIXBIT /ADM31/>
IFN FADM3A,<SIXBIT /ADM3A/>
IFN FANARB,<SIXBIT /ANNARB/>
IFN FBEHIV,<SIXBIT /BEEHIV/>
IFN FDM3K, <SIXBIT /DM3000/>
IFN FDM152,<SIXBIT /DM1520/>
IFN FDDISK,<SIXBIT /DDISK/>
IFN FDMELT,<SIXBIT /DMELT/>
IFN FGIGI, <SIXBIT /GIGI/>
IFN FH1500,<SIXBIT /H1500/>
IFN FZEH19,<SIXBIT /ZENH19/>
IFN FMEM2A,<SIXBIT /MIME2A/>
IFN FONTEL,<SIXBIT /ONTEL/>
IFN FIQ120,<SIXBIT /IQ120/>
IFN FT4041,<SIXBIT /TE4041/>
IFN FVT52, <SIXBIT /VT52/>
IFN FVT61, <SIXBIT /VT61/>
IFN FVT100,<SIXBIT /VT100/>
IFN FVT102,<SIXBIT /VT102/>
IFN FVT125,<SIXBIT /VT125/>
IFN FVI200,<SIXBIT /VI200/>
IFN FVIEWP,<SIXBIT /VIEWP/>
CRTLEN==.-CRTTAB
IFE TOPS10,<
;TABLE OF TERMINAL NAMES RECOGNIZED BY TOPS-20.
;CONTAINS SIXBIT SED-INTERNAL TERMINAL NAME; INDEXED BY VALUE RETURNED BY GTTYP
;(STILL UNDER IFN ..IDX)
.NOCRT==0 ;NOT A CRT TERMINAL
T20NAM:
.NOCRT ; 0 ( 0) - MOD 33
.NOCRT ; 1 ( 1) - MOD 35
.NOCRT ; 2 ( 2) - MOD 37
.NOCRT ; 3 ( 3) - TI
0 ; 4 ( 4) - RESERVED FOR CUSTOMER
0 ; 5 ( 5) - " " "
0 ; 6 ( 6) - " " "
0 ; 7 ( 7) - " " "
.NOCRT ; 8 (10) - DEFAULT: MAX PADDING, ETC.
.NOCRT ; 9 (11) - 'IDEAL' TERMINAL, NO FILL INF SIZ
0 ; 10 (12) - VT05
0 ; 11 (13) - VT50
.NOCRT ; 12 (14) - LA30
.NOCRT ; 13 (15) - (OBSOLETE)
.NOCRT ; 14 (16) - LA36
SIXBIT /VT52/ ; 15 (17) - VT52
SIXBIT /VT100/ ; 16 (20) - VT100
.NOCRT ; 17 (21) - LA38
.NOCRT ; 18 (22) - LA120
0 ; 19 (23) - RESERVED FOR CUSTOMER
0 ; 20 (24) - " " "
0 ; 21 (25) - " " "
0 ; 22 (26) - " " "
0 ; 23 (27) - " " "
0 ; 24 (30) - " " "
0 ; 25 (31) - " " "
0 ; 26 (32) - " " "
0 ; 27 (33) - " " "
0 ; 28 (34) - " " "
0 ; 29 (35) - " " "
0 ; 30 (36) - " " "
0 ; 31 (37) - " " "
0 ; 32 (40) - " " "
0 ; 33 (40) - " " "
0 ; 34 (41) - " " "
SIXBIT /VT125/ ; 35 (42) - VT125
SIXBIT /GIGI/ ; 36 (43) - VK100
SIXBIT /VT102/ ; 37 (45) - VT102
T20NLN==.-T20NAM
>
;SUBROUTINE TO DECIDE WHICH TERMINAL TABLE TO USE
;JUMPS INTO TERMINAL'S ENTRY ROUTINE + 1 (ASSUMES +0/ JRST DECIDE)
;SETS UP T4/ SIXBIT TERMINAL NAME, TM/ ADDRESS OF TERMINAL TABLE
;(STILL UNDER IFN ..IDX)
DECIDE: SKIPE T3,TRMNAM ;DID USER GIVE A NAME WITH THE /Z SWITCH?
JRST DECID1 ;YES - ASSUME HE KNOWS WHAT HE'S DOING; USE IT
IFN TOPS10,<
MOVE T3,[2,,T1] ;GET THE TERMINAL TYPE NAME FROM TOPS-10
MOVEI T1,.TOTRM ;IN AC T3
SETO T2,
TRMOP. T3,
JRST DECDN1 ;TERMINAL IS UNKNOWN TO TOPS-10
>
IFE TOPS10,<
MOVEI T1,.PRIIN ;GET THE TERMINAL TYPE NUMBER FROM TOPS-20
GTTYP
ERJMP DECDN1 ;ERROR (SHOULD NEVER HAPPEN)
SKIPN T3,T20NAM(T2) ;MAKE THE NUMBER A SIXBIT NAME IN T3 - VALID?
JRST DECDN1 ;NO - NON-CRT OR UNDEFINED - ERROR
>
DECID1: PUSHJ P,MATCH ;FIND THE GIVEN TERMINAL NAME IN THE TABLE
JUMPGE T1,DECIDN ;JUMP IF NO MATCH OR AMBIGUOUS
HRR TM,TERMNL(T1) ;ELSE SET UP ADDRESS OF TERMINAL'S TABLES
MOVE T4,CRTTAB(T1) ;AND SIXBIT NAME OF TERMINAL
MOVE T1,RTE(TM) ;GET ADDRESS OF TERMINAL'S ENTRY ROUTINE
JRST 1(T1) ;CONTINUE FROM THERE, SKIPPING THE JRST DECIDE
;HERE IF TERMINAL TYPE IS UNKNOWN. COMPLAIN AND EXIT.
DECIDN: HRROI T1,[ASCIZ /? Terminal name is ambiguous
/]
CAIN T1,0 ;SET UP NO MATCH OR AMBIGUOUS MESSAGE
DECDN1: HRROI T1,[ASCIZ /? Your terminal type is unknown to SED
/]
IFN TOPS10,<
OUTSTR (T1)
EXIT
>
IFE TOPS10,<
PSOUT
HALTF
>
;THIS ROUTINE MATCHES THE GIVEN (SIXBIT) STRING WITH THE TABLE CRTTAB.
;NON-AMBIGUOUS ABBREVIATIONS ARE ALLOWED
;CALL WITH T3/ KEYWORD
;RETURNS T1/ IOWD INDEX (<0) IF MATCH; 0 IF NO MATCH; >0 IF AMBIGUOUS
MATCH: SETO T2, ;GET THE MASK OF THE RIGHT LENGTH
LSH T2,-6
TDNE T3,T2
JRST .-2
SETZ T4, ;CLEAR IOWD OF FIRST ABBREVIATION FOUND
MOVSI T1,-CRTLEN ;GET IOWD INTO TERMINAL NAME TABLE
MATCH1: MOVE T0,CRTTAB(T1) ;GET NEXT TABLE ENTRY
XOR T0,T3 ;SEE IF IT'S AN EXACT MATCH
JUMPE T0,CPOPJ ;IF SO, RETURN WITH IOWD INDEX IN T1
ANDCM T0,T2 ;ELSE MASK ENTRY TO THE LENGTH OF THE KEY
JUMPN T0,MATCH3 ;JUMP IF NO MATCH
CAIN T4,0 ;ALREADY FOUND AN ABBREVIATED MATCH?
SKIPA T4,T1 ;NO - SAVE INDEX OF THIS ONE
TLZ T4,-1 ;YES - ABBREVIATION IS AMBIGUOUS
MATCH3: AOBJN T1,MATCH1 ;NO EXACT MATCH YET - LOOP THROUGH TABLE
MOVE T1,T4 ;DONE - RETURN IOWD INDEX IN T1
POPJ P, ;(0=NOT FOUND, -1=AMBIGUOUS)
> ;END IFN ..IDX
IFN FAD100,<
;ADDS REGEANT 100 TERMINAL DEFINITIONS
OAD100: BYTE (7) 32 ;CURSOR UP
BYTE (7) 12 ; DOWN
BYTE (7) 6 ; RIGHT
BYTE (7) 10 ; LEFT
BYTE (7) 33,"Y"," "," " ; HOME
BYTE (7) 33,"k" ;CLEAR PAGE
BYTE (7) 33,"K" ;CLEAR LINE
BYTE (7) 1,12 ;ROLL UP AND CLEAR LINE
CPOPJ ;ROLL DOWN AND CLEAR LINE
CPOPJ ;PROTECT ON
; BYTE(7) 33,"0","Q" ;PROTECT ON
CPOPJ ;PROTECT OFF
; BYTE (7) 33,"0","@" ;PROTECT OFF
0 ;INSERT A BLANK LINE
0 ;INSERT A SPACE
0 ;DELETE LINE
0 ;DELETE SPACE
BYTE (7) 33,"Y","7"," " ;MOVE TO BOTTOM
BYTE (7) 14 ;HOME AND CLEAR PAGE
CAD100 ;ROUTINE TO POSITION TO CHARACTER
LAD100 ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
WRP!NLP!SLW!MRK ;FLAGS (WRAPAROUND, REWRITE LAST LINE)
EAD100 ;ROUTINE TO CALL ON ENTRY
XAD100 ;ROUTINE TO CALL ON EXIT
1,,0 ;SEND NULLS AFTER CURSOR POSITIONING
IAD100 ;ADDRESS OF TERMINAL INPUT TABLE
IFN FTIMD,<
0 ;START INSERT MODE
0 ;END INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
"*" ;MARK CHARACTER
0 ;COMMAND FOR RUBOUT (RESET)
IAD100: 4
EXP 37
-SA10.S,,SA10.T ;^B REQUIRES A SUBTABLE (FUNCTION KEYS)
EXP 3,12, 5,35,40 ; C - G
EXP 10,11,34,1,23,15,7,25 ; H - O
EXP 20,27,22,0,24,10,26,21 ; P - W
EXP 30,31,36,33,14,35,13,6 ; X - Z, [,\,],^,_
SA10.S=.-SA10.T
SA10.T: IASUB1,,"1" ;f1 = set file
IASUB2,,"2" ;f2 = insert control character
IASUB3,,"3" ;f3 = insert real tab
IASUB4,,"4" ;f4 = switch
IASUB5,,"5" ;f5 = insert/replace toggle
IASUB6,,"6" ;f6 = recall
IASUB7,,"7" ;f7 = mark
IASUB8,,"8" ;f8 = exit
IASUB1: 2,,0
IASUB2: 17,,0
IASUB3: 43,,0
IASUB4: 16,,0
IASUB5: 41,,0
IASUB6: 40,,0
IASUB7: 44,,0
IASUB8: 32,,0
;POSITIONING ALGORITHMS
;OUTPUT ROW+37, COLUMN+37; STARTING ROW, COLUMN ARE [1,1]
;MOVE TO ROW (RW), COLUMN (CM)
CAD100: MOVE T1,[BYTE (7) 33,"Y"]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(RW) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40(CM) ;GET COLUMN POSITION
IDPB T1,TY
POPJ P, ;DONE
;MOVE TO START OF LINE (T4)
LAD100: MOVE T1,[BYTE (7) 33,"Y"]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(T4) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40 ;MOVE TO COLUMN ZERO
IDPB T1,TY
POPJ P,
;ENTRY ROUTINE TO SET TT FORM AND NO CRLF BITS
;NOTE: THE ENTRY AND EXIT ROUTINES HAVE BEEN WRITTEN FOR TOPS-10 ONLY
EAD100:
IFN ..IDX-1,<JRST DECIDE>
IFN TOPS10,<
PJOB T1, ;GET JOB NUMBER IN T1
TRMNO. T1, ;GET UNIVERSAL DEVICE INDEX IN T1
POPJ P, ;ERROR RETURN
MOVEM T1,TTFORM+1 ;SET UDI IN ARG BLOCKS
MOVEM T1,TTCRLF+1
MOVEM T1,TTSET+1
MOVE T1,[XWD 2,TTFORM]
TRMOP. T1,
POPJ P, ;ERROR RETURN
MOVEM T1,TTSTAT ;SAVE FORM STATUS BIT
MOVE T1,[XWD 2,TTCRLF]
TRMOP. T1,
POPJ P,
MOVEM T1,TTSTAT+1 ;SAVE CRLF STATUS BIT
SETOM TTSET+2 ;RESET WORD IF ROUTINE IS USED AGAIN
MOVE T1,[XWD 3,TTSET]
TRMOP. T1, ;SET TT FORM
POPJ P,
MOVEI T1,2010
MOVEM T1,TTSET
MOVE T1,[XWD 3,TTSET]
TRMOP. T1, ;SET TT NO CRLF
POPJ P, ;ERROR RETURN
>
POPJ P, ;NORMAL RETURN
;EXIT ROUTINE TO RESTORE FORM AND CRLF STATUS
XAD100:
IFN TOPS10,<
MOVE T1,TTSTAT+1
MOVEM T1,TTSET+2
MOVE T1,[XWD 3,TTSET]
TRMOP. T1, ;RESTORE CRLF STATUS
POPJ P, ;ERROR RETURN
MOVEI T1,2006
MOVEM T1,TTSET
MOVE T1,TTSTAT
MOVEM T1,TTSET+2
MOVE T1,[XWD 3,TTSET]
TRMOP. T1, ;RESTORE FORM STATUS
POPJ P, ;ERROR RETURN
>
POPJ P, ;NORMAL RETURN
IFN TOPS10,<
;DATA BLOCKS FOR INITIALIZATION TRMOPS (FORM, NO CRLF)
TTFORM: 1006
0
TTCRLF: 1010
0
TTSET: 2006
0
-1
TTSTAT: 0 ;WORD TO SAVE TTY LINE CHARACTERISTICS
0
>
>
IFN FADM2,<
;ADM2 TERMINAL DEFINITIONS
OADM2: BYTE (7) 13 ;CURSOR UP
BYTE (7) 12 ; DOWN
BYTE (7) 14 ; RIGHT
BYTE (7) 10 ; LEFT
BYTE (7) 36 ; HOME
BYTE (7) 33,"Y" ;CLEAR PAGE
BYTE (7) 33,"T" ;CLEAR LINE
BYTE (7) 12 ;ROLL UP AND CLEAR LINE
BYTE (7) 33,"E" ;ROLL DOWN AND CLEAR LINE
BYTE (7) 33,")" ;PROTECT ON
BYTE (7) 33,"(" ;PROTECT OFF
BYTE (7) 33,"E" ;INSERT A BLANK LINE
BYTE (7) 33,"Q" ;INSERT A SPACE
BYTE (7) 33,"R" ;DELETE LINE
BYTE (7) 33,"W" ;DELETE SPACE
BYTE (7) 36,13 ;MOVE TO BOTTOM
BYTE (7) 36,33,"Y" ;HOME AND CLEAR PAGE
CADM2 ;ROUTINE TO POSITION TO CHARACTER
LADM2 ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
WRP ;FLAGS (WRAPAROUND)
EADM2 ;ROUTINE TO CALL ON ENTRY
CPOPJ ;ROUTINE TO CALL ON EXIT
0 ;NO NULLS NEEDED
IADM2 ;ADDRESS OF TERMINAL INPUT TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
0 ;COMMAND FOR RUBOUT (RESET)
IADM2: 40
-SAD2.S,,SAD2.T ;^A NEEDS A SUBTABLE
EXP 2, 3, 4, 5, 6, 7
EXP 10,11,34,36,35,15,16,17 ;^K AND ^L ALTERED
EXP 20,21,22,23,24,25,26,27
EXP 30,31,32,33,34,35,37,43 ;36==HOME; 37==REAL-TAB
SAD2.T: IADF16,,"O" ;^A O CR == 16 == ENTER
IADF01,,"@" ;^A @ CR == 1 == INSERT-SPACES
IADF02,,"A" ;^A A CR == 2 == DELETE-SPACES
IADF03,,"B" ;^A B CR == 3 == SLIDE-LEFT
IADF04,,"C" ;^A C CR == 4 == SLIDE-RIGHT
IADF13,,"L" ;^A L CR == 13 == ERASE-CHARACTER
IADF14,,"M" ;^A M CR == 14 == INSERT MODE
IADF15,,"N" ;^A N CR == 15 == RECALL
IADF08,,"G" ;^A G CR == 8 == REAL TAB
IADF12,,"K" ;^A K CR == 12 == MARK
IADF11,,"J" ;^A J CR == 11 == ERASE-LINE
IADF10,,"I" ;^A I CR == 10 == WINDOW
SAD2.S==.-SAD2.T
IADF01: "A"-100,,0
IADF02: "S"-100,,0
IADF03: "K"-100,,0
IADF04: "L"-100,,0
IADF08: 43,,0
IADF12: 44,,0
IADF13: 42,,0
IADF14: 41,,0
IADF15: 40,,0
IADF16: 33,,0
IADF11: 50,,0
IADF10: 47,,0
;ROUTINE TO CALL ON ENTRY
EADM2:
IFN ..IDX-1,<JRST DECIDE>
POPJ P,
;POSITIONING ALGORITHMS
CADM2: MOVE T1,[BYTE (7) 33,"="]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(RW) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40(CM) ;GET COLUMN POSITION
IDPB T1,TY
POPJ P, ;DONE
LADM2: MOVE T1,[BYTE (7) 33,"="]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(T4) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40 ;MOVE TO COLUMN ZERO
IDPB T1,TY
POPJ P,
>
IFN FADM31,<
;NOTE: THIS MODULE IS AS YET UNTESTED, AND MAY NOT BE QUITE RIGHT
FAD31F==0 ;SET THIS IF TERMINAL SENDS OUT XON-XOFF'S
;TERMINAL OUTPUT TABLE - SEQUENCES TO MAKE THE TERMINAL DO SPECIAL THINGS
OADM31: BYTE (7) 13 ;CURSOR UP
BYTE (7) 12 ; DOWN
BYTE (7) 14 ; RIGHT
BYTE (7) 10 ; LEFT
BYTE (7) 36 ; HOME
BYTE (7) 33,"Y" ;CLEAR TO END OF PAGE
BYTE (7) 33,"T" ;CLEAR TO END OF LINE
BYTE (7) 12 ;ROLL UP AND CLEAR LINE
BYTE (7) 33,"E" ;ROLL DOWN AND CLEAR LINE
BYTE (7) 33,"G","4" ;PROTECT ON (CPOPJ IF NONE)
BYTE (7) 33,"G","0" ;PROTECT OFF (CPOPJ IF NONE)
BYTE (7) 33,"E" ;INSERT LINE (0 IF NONE)
BYTE (7) 33,"Q" ;INSERT SPACE (0 IF NONE)
BYTE (7) 33,"R" ;DELETE LINE (0 IF NONE)
BYTE (7) 33,"W" ;DELETE SPACE (0 IF NONE)
BYTE (7) 36,13 ;MOVE TO BOTTOM
BYTE (7) 36,33,"Y" ;HOME AND CLEAR ENTIRE PAGE
CADM31 ;ROUTINE TO POSITION TO CHARACTER
LADM31 ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
IFE FAD31F,<
WRP ;TERMINAL-DEPENDENT FLAGS (WRAP)
>
IFN FAD31F,<
WRP!NPG ;TERMINAL-DEPENDENT FLAGS (KEEP TTY PAGE)
>
EADM31 ;ROUTINE TO CALL ON ENTRY
CPOPJ ;ROUTINE TO CALL ON EXIT
0,,0 ;NUMBER OF NULLS TO OUTPUT,,NULL CHARACTER
IADM31 ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
;TERMINAL INPUT TABLE - TELLS WHAT CONTROL CHARACTERS OR SEQUENCES
;INVOKE WHICH COMMANDS
IFE FAD31F,<
0 ;CODE FOR RUBOUT (0==RESET)
IADM31: EXP 33, 1, 2, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,34,36,35,15,16,17
EXP 20,21,22,23,24,25,26,27
EXP 30,31,32
-SA31.S,,SA31.T ;ESCAPE NEEDS A SUBTABLE
EXP 34,35,37,37
>
IFN FAD31F,<
;THIS TABLE SETS UP THE KEYBOARD ARRANGEMENT FOR WHEN YOU NEED TO KEEP
;TTY PAGE IN EFFECT BECAUSE THE TERMINAL SENDS OUT ITS OWN CONTROL S AND Q'S
;THOSE TWO CHARACTERS CANNOT BE COMMANDS SINCE SED DOES NOT KNOW WHETHER THE
;USER HAS TYPED THEM OR THEY WERE SENT BY THE TERMINAL.
;SO Q GOES TO A, A AND S GO TO B AND N, B TO ESCAPE-F, AND M TO ESCAPE-S.
0 ;COMMAND FOR RUBOUT (RESET)
IADM31: EXP 33,21, 1, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,34,36,35,15,23,17
EXP 20, 0,22, 0,24,25,26,27
EXP 30,31,32
-SA31.S,,SA31.T
EXP 34,35,37,37
>
;SUBTABLE FOR ESCAPE
SA31.T: 33,,33 ;ESCAPE ESCAPE == ENTER
37,,"H" ;ESCAPE H == HOME
42,,"D" ;ESCAPE D == DELETE-CHARACTER
41,,"I" ;ESCAPE I == INSERT-MODE
43,,"T" ;ESCAPE T == REAL-TAB
44,,"M" ;ESCAPE M == MARK
40,,"E" ;ESCAPE E == RECALL
13,,"L" ;ESCAPE L == SLIDE-LEFT
14,,"R" ;ESCAPE R == SLIDE-RIGHT
47,,"W" ;ESCAPE W == WINDOW
IFN FAD31F,<
02,,"F" ;ESCAPE F == SET-FILE
16,,"S" ;ESCAPE S == SWITCH
>
SA31.S=.-SA31.T
;ROUTINE TO CALL ON ENTRY
EADM31:
IFN ..IDX-1,<JRST DECIDE>
POPJ P,
;POSITIONING ALGORITHMS
CADM31: MOVE T1,[BYTE (7) 33,"="]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(RW) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40(CM) ;GET COLUMN POSITION
IDPB T1,TY
POPJ P, ;DONE
LADM31: MOVE T1,[BYTE (7) 33,"="]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(T4) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40 ;MOVE TO COLUMN ZERO
IDPB T1,TY
POPJ P,
>
IFN FADM3A,<
;TABLES FOR THE ADM3A
FAD3AF==0 ;SET THIS IF TERMINAL SENDS OUT XON-XOFF'S
FAD3AA==0 ;SET THIS IF TERMINAL HAS THE AUTONL SWITCH SET ON
;TERMINAL OUTPUT TABLE - SEQUENCES TO MAKE THE TERMINAL DO SPECIAL THINGS
OADM3A: BYTE (7) 13 ;CURSOR UP
BYTE (7) 12 ; DOWN
BYTE (7) 14 ; RIGHT
BYTE (7) 10 ; LEFT
BYTE (7) 36 ; HOME
0 ;CLEAR TO END OF PAGE
0 ;CLEAR TO END OF LINE
BYTE (7) 12 ;ROLL UP AND CLEAR LINE
0 ;ROLL DOWN AND CLEAR LINE
0 ;PROTECT ON (NONE)
0 ;PROTECT OFF (NONE)
0 ;INSERT LINE (NONE)
0 ;INSERT SPACE (NONE)
0 ;DELETE LINE (NONE)
0 ;DELETE SPACE (NONE)
BYTE (7) 33,"=","7"," " ;MOVE TO BOTTOM
BYTE (7) 36,32 ;HOME AND CLEAR ENTIRE PAGE
CADM3A ;ROUTINE TO POSITION TO CHARACTER
LADM3A ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
IFE FAD3AF,<
IFE FAD3AA,<
MRK!SLW ;TERMINAL-DEPENDENT FLAGS (MARK)
>
IFN FAD3AA,<
WRP!MRK!SLW ;TERMINAL-DEPENDENT FLAGS (WRAP, MARK)
>>
IFN FAD3AF,<
IFE FAD3AA,<
MRK!NPG!SLW ;TERMINAL-DEPENDENT FLAGS (KEEP TTY PAGE)
>
IFN FAD3AA,<
WRP!MRK!NPG!SLW ;TERMINAL-DEPENDENT FLAGS (KEEP TTY PAGE)
>>
EADM3A ;ROUTINE TO CALL ON ENTRY
CPOPJ ;ROUTINE TO CALL ON EXIT
0,,0 ;NUMBER OF NULLS TO OUTPUT,,NULL CHARACTER
IADM3A ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
"~" ;MARK TO INSERT ON ENTER
;TERMINAL INPUT TABLE - TELLS WHAT CONTROL CHARACTERS OR SEQUENCES
;INVOKE WHICH COMMANDS
IFE FAD3AF,<
0 ;CODE FOR RUBOUT (0==RESET)
IADM3A: EXP 33, 1, 2, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,34,36,35,15,16,17
EXP 20,21,22,23,24,25,26,27
EXP 30,31,32
-SA3A.S,,SA3A.T ;ESCAPE NEEDS A SUBTABLE
EXP 34,35,37,37
>
IFN FAD3AF,<
;THIS TABLE SETS UP THE KEYBOARD ARRANGEMENT FOR WHEN YOU NEED TO KEEP
;TTY PAGE IN EFFECT BECAUSE THE TERMINAL SENDS OUT ITS OWN CONTROL S AND Q'S
;THOSE TWO CHARACTERS CANNOT BE COMMANDS SINCE SED DOES NOT KNOW WHETHER THE
;USER HAS TYPED THEM OR THEY WERE SENT BY THE TERMINAL.
;SO Q GOES TO A, A AND S GO TO B AND N, B TO ESCAPE-F, AND N TO ESCAPE-S.
0 ;COMMAND FOR RUBOUT (RESET)
IADM3A: EXP 33,21, 1, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,34,36,35,15,23,17
EXP 20, 0,22, 0,24,25,26,27
EXP 30,31,32
-SA3A.S,,SA3A.T
EXP 34,35,37,37
>
;SUBTABLE. PUT THE MOST FREQUENTLY-USED SEQUENCES FIRST
;ENTER IS PROBABLY THE MOST COMMON OF ALL
SA3A.T: $ENTER,,33 ;ESCAPE ESCAPE == ENTER
$CURHM,,"H" ;ESCAPE H == HOME
$CURHM,,"h" ;ESCAPE h == HOME
$DELCH,,"D" ;ESCAPE D == DELETE-CHARACTER
$DELCH,,"d" ;ESCAPE d == DELETE-CHARACTER
$INMOD,,"I" ;ESCAPE I == INSERT-MODE
$INMOD,,"i" ;ESCAPE i == INSERT-MODE
$RLTAB,,"T" ;ESCAPE T == REAL-TAB
$RLTAB,,"t" ;ESCAPE t == REAL-TAB
$MARK,,"M" ;ESCAPE M == MARK
$MARK,,"m" ;ESCAPE m == MARK
$RECAL,,"E" ;ESCAPE E == RECALL
$RECAL,,"e" ;ESCAPE e == RECALL
$CASE,,"C" ;ESCAPE C == CASE
$CASE,,"c" ;ESCAPE c == CASE
$SLDLF,,"L" ;ESCAPE L == SLIDE-LEFT
$SLDLF,,"l" ;ESCAPE l == SLIDE-LEFT
$SLDRT,,"R" ;ESCAPE R == SLIDE-RIGHT
$SLDRT,,"r" ;ESCAPE r == SLIDE-RIGHT
$WINDW,,"W" ;ESCAPE W == WINDOW
$WINDW,,"w" ;ESCAPE w == WINDOW
$SUBST,,"X" ;ESCAPE X == SUBSTITUTE
$SUBST,,"x" ;ESCAPE x == SUBSTITUTE
$BLINE,,"<" ;ESCAPE < == GO TO START OF LINE
$ELINE,,">" ;ESCAPE > == GO TO END OF LINE
$ERSLN,,"F" ;ESCAPE F == ERASE TO EOL
$ERSLN,,"f" ;ESCAPE f == ERASE TO EOL
$UPTAB,,"K" ;ESCAPE K == UP TAB
$UPTAB,,"k" ;ESCAPE k == UP TAB
$DNTAB,,"J" ;ESCAPE J == DOWN TAB
$DNTAB,,"j" ;ESCAPE j == DOWN TAB
$REWRT,,"Q" ;ESCAPE Q == REDRAW SCREEN
$REWRT,,"q" ;ESCAPE q == REDRAW SCREEN
$SAVE,,"Z" ;ESCAPE Z == SAVE FILE
$SAVE,,"z" ;ESCAPE z == SAVE FILE
$HELP,,"?" ;ESCAPE ? == HELP
$ERSWD,,"U" ;ESCAPE U == ERASE PREVIOUS WORD
$ERSWD,,"u" ;ESCAPE u == ERASE PREVIOUS WORD
IFN FAD3AF,<
$SETFI,,"F" ;ESCAPE F == SET-FILE
$SETFI,,"f" ;ESCAPE f == SET-FILE
$SWTCH,,"S" ;ESCAPE S == SWITCH
$SWTCH,,"s" ;ESCAPE s == SWITCH
>
SA3A.S=.-SA3A.T
;ROUTINE TO CALL ON ENTRY
EADM3A:
IFN ..IDX-1,<JRST DECIDE>
POPJ P,
;POSITIONING ALGORITHMS
CADM3A: MOVE T1,[BYTE (7) 33,"="]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(RW) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40(CM) ;GET COLUMN POSITION
IDPB T1,TY
POPJ P, ;DONE
LADM3A: MOVE T1,[BYTE (7) 33,"="]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(T4) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40 ;MOVE TO COLUMN ZERO
IDPB T1,TY
POPJ P,
>
IFN FANARB,<
;OUTPUT TABLE FOR THE ANN-ARBOR TERMINAL
OANARB: BYTE (7) 16 ;CURSOR UP
BYTE (7) 12 ; DOWN
BYTE (7) 37 ; RIGHT
BYTE (7) 10 ; LEFT
BYTE (7) 13 ; HOME
0 ;CLEAR TO END OF PAGE
0 ;CLEAR TO END OF LINE
0 ;ROLL UP AND CLEAR LINE
BYTE (7) 12 ;ROLL DOWN AND CLEAR LINE
CPOPJ ;PROTECT ON (CPOPJ IF NONE)
CPOPJ ;PROTECT OFF (CPOPJ IF NONE)
0 ;INSERT LINE (0 IF NONE)
0 ;INSERT SPACE (0 IF NONE)
0 ;DELETE LINE (0 IF NONE)
0 ;DELETE SPACE (0 IF NONE)
BYTE (7) 13,16 ;MOVE TO BOTTOM
BYTE (7) 13,14 ;HOME AND CLEAR PAGE
CPOPJ ;SEQUENCE FOR ABSOLUTE POSITIONING
CPOPJ ;ALGORITHM FOR CURSOR POSITIONING
^D40 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
MRK ;FLAGS (MARK ON ENTER, NO ROLL DOWN)
EANARB ;ROUTINE TO CALL ON ENTRY
CPOPJ ;ROUTINE TO CALL ON EXIT
0 ;NO NULLS NEEDED
IANNAB ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;INSERT MODE ON (NONE)
0 ;INSERT MODE OFF (NONE)
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
"$" ;MARK TO DISPLAY ON ENTER (OMIT IF MRK NOT SET)
;TERMINAL INPUT TABLE - TELLS WHAT CONTROL CHARACTERS OR SEQUENCES
;INVOKE WHICH COMMANDS
0 ;COMMAND FOR RUBOUT (RESET)
IANNAB: EXP 40, 1, 2, 3, 4, 5, 6, 7
EXP 10,11,34,37,14,15,34,17 ;13==HOME, 16==UP
EXP 20,21,22,23,24,25,26,27
EXP 30,31,32
-7,,ISUBTB ;ESCAPE NEEDS A SUBTABLE (FOR EXAMPLE)
EXP 34,35,36,35 ;37==RIGHT
EXP $RESET ;RUBOUT
0
IVT52: EXP $RECAL, $INSSP, $SETFI ; 0, A, B
; 40 1 2
EXP $ABORT, $INSLN, $SRCBK, $DELLN ;C, D, E, F
; 3 4 5 6
EXP $PUT, $DELCH, $TAB, $ERSLN ;G, H, I, J
; DELCH 7 XX 11 50
EXP $SLDLF, $SLDRT, $RETRN, $SWTCH ;K, L, M, N
; 13 14 15 16
EXP $ENTCC, $GOTO, $RLBKP, $SRCFW ;O, P, Q, R
; 17 20 21 22
EXP $DELSP, $RLFWL, $BKTAB, $PICK ;S, T, U, V
; 23 24 25 26
EXP $RLBKL, $EXEC, $RLFWP, $EXIT ;W, X, Y, Z
; 27 30 31 32
EXP -SIZ.IS,,I.VT52 ;ESCAPE
; 33
EXP $PUSH, $CURRT, $SUBST, $SAVE ;\, ], ^, _
ISUBTB: $CURUP,,"A" ;ESCAPE A == UP
$CURDN,,"B" ;ESCAPE B == DOWN
$CURRT,,"C" ;ESCAPE C == RIGHT
$CURLF,,"D" ;ESCAPE D == LEFT
$ENTER,,"P" ;ESCAPE P == ENTER
$CURHM,,"R" ;ESCAPE R == HOME
$RECAL,,"Q" ;ESCAPE Q == RECALL
;ANN-ARBOR ENTRY ROUTINE. NONE NEEDED; JUST INTERFACE TO DECIDE:
EANARB:
IFN ..IDX-1,<JRST DECIDE> ;DECIDE WHICH TERMINAL, IF MORE THAN ONE
POPJ P, ;NOTHING ELSE TO DO
>
IFN FBEHIV,<
;BEEHIVE B100 TERMINAL DEFINITIONS FOR THE EDITOR
FBE10F==0 ;SET THIS IF TERMINAL SENDS OUT XON-XOFF'S
;TERMINAL OUTPUT TABLE - SEQUENCES TO MAKE THE TERMINAL DO SPECIAL THINGS
OBEHIV: BYTE (7) 33,"A" ;CURSOR UP
BYTE (7) 33,"B" ; DOWN
BYTE (7) 33,"C" ; RIGHT
BYTE (7) 33,"D" ; LEFT
BYTE (7) 33,"H" ; HOME
BYTE (7) 33,"J" ;CLEAR TO END OF PAGE
BYTE (7) 33,"K" ;CLEAR TO END OF LINE
BYTE (7) 12 ;ROLL UP AND CLEAR LINE
BYTE (7) 0 ;ROLL DOWN AND CLEAR LINE
BYTE (7) 33,"]" ;PROTECT ON (CPOPJ IF NONE)
BYTE (7) 33,"[" ;PROTECT OFF (CPOPJ IF NONE)
BYTE (7) 0 ;INSERT LINE (0 IF NONE)
BYTE (7) 0 ;INSERT SPACE (0 IF NONE)
BYTE (7) 0 ;DELETE LINE (0 IF NONE)
BYTE (7) 33,"P" ;DELETE SPACE (0 IF NONE)
BYTE (7) 33,"F","7"," " ;MOVE TO BOTTOM
BCLRSC ;HOME AND CLEAR ENTIRE PAGE
CBEHIV ;ROUTINE TO POSITION TO CHARACTER
LBEHIV ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
IFE FBE10F,<
WRP!NLP ;TERMINAL-DEPENDENT FLAGS
>
IFN FBE10F,<
WRP!NLP!NPG ;TERMINAL-DEPENDENT FLAGS (KEEP TTY PAGE)
>
EBEHIV ;ROUTINE TO CALL ON ENTRY
CPOPJ ;ROUTINE TO CALL ON EXIT
6,,0 ;NUMBER OF NULLS TO OUTPUT,,NULL CHARACTER
IBEHIV ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
;TERMINAL INPUT TABLE - TELLS WHAT CONTROL CHARACTERS OR SEQUENCES
;INVOKE WHICH COMMANDS
IFE FBE10F,<
0 ;CODE FOR RUBOUT (0==RESET)
IBEHIV: EXP 40, 1, 2, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,34,13,14,15,16,17
EXP 20,21,22,23,24,25,26,27
EXP 30,31,32
-SB10.S,,SB10.T ;ESCAPE NEEDS A SUBTABLE
EXP 34,35,36,37
>
IFN FBE10F,<
;THIS TABLE SETS UP THE KEYBOARD ARRANGEMENT FOR WHEN YOU NEED TO KEEP
;TTY PAGE IN EFFECT BECAUSE THE TERMINAL SENDS OUT ITS OWN CONTROL S AND Q'S
;THOSE TWO CHARACTERS CANNOT BE COMMANDS SINCE SED DOES NOT KNOW WHETHER THE
;USER HAS TYPED THEM OR THEY WERE SENT BY THE TERMINAL.
;SO Q GOES TO A, A AND S GO TO K AND L, K TO ESCAPE-L, AND L TO ESCAPE-T.
0 ;COMMAND FOR RUBOUT (RESET)
IBEHIV: EXP 40,21, 2, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,34, 1,23,15,16,17
EXP 20, 0,22, 0,24,25,26,27
EXP 30,31,32
-SB10.S,,SB10.T
EXP 34,35,36,37
>
;SUBTABLE. PUT THE MOST FREQUENTLY-USED SEQUENCES FIRST
;ENTER IS PROBABLY THE MOST COMMON OF ALL
SB10.T: 33,,"E" ;ESCAPE E == ENTER
33,,"e"
43,,"T" ;ESCAPE T == REAL-TAB
43,,"t"
40,,"Q" ;ESCAPE Q == RECALL
40,,"q"
41,,"I" ;ESCAPE I == INSERT-MODE
41,,"i"
44,,"M" ;ESCAPE M == MARK
44,,"m"
50,,"K" ;ESCAPE K == ERASE-LINE
50,,"k"
47,,"W" ;ESCAPE W == WINDOW
47,,"w"
IFN FBE10F,<
13,,"L" ;ESCAPE L == SLIDE-LEFT
14,,"R" ;ESCAPE T == SLIDE-RIGHT
13,,"l" ;ESCAPE l == SLIDE-LEFT
14,,"r" ;ESCAPE t == SLIDE-RIGHT
>
SB10.S=.-SB10.T
;ROUTINE TO CALL ON ENTRY
EBEHIV:
IFN ..IDX-1,<JRST DECIDE>
POPJ P,
;SUBROUTINE TO MOVE TO ROW (RW), COLUMN (CM)
CBEHIV: MOVE T1,[BYTE (7) 33,"F"]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(RW) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40(CM) ;GET COLUMN POSITION
IDPB T1,TY
POPJ P, ;DONE
;SUBROUTINE TO MOVE TO START OF LINE (T4)
LBEHIV: MOVE T1,[BYTE (7) 33,"F"]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(T4) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40 ;MOVE TO COLUMN ZERO
IDPB T1,TY
POPJ P,
;SUBROUTINE TO MOVE TO START OF LINE (T4)
BCLRSC: MOVE T1,[BYTE (7) 33,"E"]
PUSHJ P,PUTSQ1
PUSHJ P,PUTTYP ;OUTPUT IT NOW
MOVEI T1,^D100 ;LET IT TAKE EFFECT
IFN TOPS10,<
HIBER T1,
JFCL
>
IFE TOPS10,<
DISMS
>
POPJ P,
>
IFN FDM3K,<
;DATAMEDIA 3000 TERMINAL DEFINITIONS
FDM3KF==0 ;SET THIS IF TERMINAL SENDS OUT XON-XOFF'S
;TERMINAL OUTPUT TABLE - SEQUENCES TO MAKE THE TERMINAL DO SPECIAL THINGS
ODM3K: BYTE (7) 33,"A" ;CURSOR UP
BYTE (7) 12 ; DOWN
BYTE (7) 33,"C" ; RIGHT
BYTE (7) 10 ; LEFT
BYTE (7) 33,"H" ; HOME
BYTE (7) 33,"J" ;CLEAR TO END OF PAGE
BYTE (7) 33,"K" ;CLEAR TO END OF LINE
BYTE (7) 12 ;ROLL UP AND CLEAR LINE
BYTE (7) 0 ;ROLL DOWN AND CLEAR LINE
BYTE (7) 33,"O" ;PROTECT ON (CPOPJ IF NONE)
BYTE (7) 33,"N" ;PROTECT OFF (CPOPJ IF NONE)
BYTE (7) 0 ;INSERT LINE (0 IF NONE)
BYTE (7) 33,"R" ;INSERT SPACE (0 IF NONE)
BYTE (7) 0 ;DELETE LINE (0 IF NONE)
BYTE (7) 0 ;DELETE SPACE (0 IF NONE)
BYTE (7) 33,"Y"," ","7" ;MOVE TO BOTTOM
BYTE (7) 33,"H",33,"J" ;HOME AND CLEAR ENTIRE PAGE
CDM3K ;ROUTINE TO POSITION TO CHARACTER
LDM3K ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
IFE FDM3KF,<
WRP ;TERMINAL-DEPENDENT FLAGS
>
IFN FDM3KF,<
WRP!NPG ;TERMINAL-DEPENDENT FLAGS (KEEP TTY PAGE)
>
EDM3K ;ROUTINE TO CALL ON ENTRY
CPOPJ ;ROUTINE TO CALL ON EXIT
0,,0 ;NUMBER OF NULLS TO OUTPUT,,NULL CHARACTER
IDM3K ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
;TERMINAL INPUT TABLE - TELLS WHAT CONTROL CHARACTERS OR SEQUENCES
;INVOKE WHICH COMMANDS
;NOTE: D3000 KEYS NOT USED: PF10=$y<CR> XMIT=$L XMIT-LINE=$T MR=$M
; PRINT=$] ROLL=$V INS-CHAR=$P
IFE FDM3KF,<
0 ;CODE FOR RUBOUT (0==RESET)
IDM3K: EXP 40, 1, 2, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,34,13,14,15,16,17
EXP 20,21,22,23,24,25,26,27
EXP 30,31,32
-SDM3.S,,SDM3.T ;ESCAPE NEEDS A SUBTABLE
EXP 35,33,37,36 ;ENTER==CONTROL-]
>
IFN FDM3KF,<
;THIS TABLE SETS UP THE KEYBOARD ARRANGEMENT FOR WHEN YOU NEED TO KEEP
;TTY PAGE IN EFFECT BECAUSE THE TERMINAL SENDS OUT ITS OWN CONTROL S AND Q'S
;THOSE TWO CHARACTERS CANNOT BE COMMANDS SINCE SED DOES NOT KNOW WHETHER THE
;USER HAS TYPED THEM OR THEY WERE SENT BY THE TERMINAL.
;SO Q GOES TO A, A AND S GO TO K AND L, K TO ESCAPE-L, AND L TO ESCAPE-T.
0 ;COMMAND FOR RUBOUT (RESET)
IDM3K: EXP 40,21, 2, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,34, 1,23,15,16,17
EXP 20, 0,22, 0,24,25,26,27
EXP 30,31,32
-SDM3.S,,SDM3.T
EXP 35,33,37,36 ;ENTER==CONTROL-]
>
;SUBTABLE. PUT THE MOST FREQUENTLY-USED SEQUENCES FIRST
;ENTER IS PROBABLY THE MOST COMMON OF ALL
SDM3.T: D3PF1,,"p" ;PF1 == ENTER
35,,"C" ;ESCAPE C == CURSOR-RIGHT
36,,"A" ;ESCAPE A == CURSOR-UP
D3PF2,,"q" ;PF2 == RECALL
D3PF3,,"r" ;PF3 == INSERT-MODE
D3PF4,,"s" ;PF4 == MARK
D3PF5,,"t" ;PF5 == TAB
D3PF6,,"u" ;PF6 == LINE
D3PF7,,"v" ;PF7 == CASE
D3PF8,,"w" ;PF8 == ERASE-CHAR
D3PF9,,"x" ;PF9 == HOME
33,,"E" ;ESCAPE E == ENTER
33,,"e"
41,,"I" ;ESCAPE I == INSERT-MODE
41,,"i"
44,,"M" ;ESCAPE M == MARK
44,,"m"
50,,"K" ;ESCAPE K == ERASE-LINE
50,,"k"
47,,"W" ;ESCAPE W == WINDOW
47,,"w"
IFN FDM3KF,<
13,,"L" ;ESCAPE L == SLIDE-LEFT
14,,"R" ;ESCAPE R == SLIDE-RIGHT
13,,"l" ;ESCAPE l == SLIDE-LEFT
14,,"r" ;ESCAPE r == SLIDE-RIGHT
>
SDM3.S=.-SDM3.T
D3PF1: 33,,0
D3PF2: 40,,0
D3PF3: 41,,0
D3PF4: 44,,0
D3PF5: 43,,0
D3PF6: 45,,0
D3PF7: 46,,0
D3PF8: 42,,0
D3PF9: 37,,0
;ROUTINE TO CALL ON ENTRY
EDM3K:
IFN ..IDX-1,<JRST DECIDE>
POPJ P,
;SUBROUTINE TO MOVE TO ROW (RW), COLUMN (CM)
CDM3K: MOVE T1,[BYTE (7) 33,"Y"]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(CM) ;GET COLUMN POSITION
IDPB T1,TY
MOVEI T1,40(RW) ;GET ROW POSITION
IDPB T1,TY
POPJ P, ;DONE
;SUBROUTINE TO MOVE TO START OF LINE (T4)
LDM3K: MOVE T1,[BYTE (7) 33,"Y"]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40 ;MOVE TO COLUMN ZERO
IDPB T1,TY
MOVEI T1,40(T4) ;GET ROW POSITION
IDPB T1,TY
POPJ P,
>
IFN FDM152,<
;DATAMEDIA 1520/1521 TERMINAL DEFINITIONS
FDM52F==0 ;SET THIS IF TERMINAL SENDS OUT XON-XOFF'S
;TERMINAL OUTPUT TABLE - SEQUENCES TO MAKE THE TERMINAL DO SPECIAL THINGS
ODM152: BYTE (7) 37 ;CURSOR UP
BYTE (7) 12 ; DOWN
BYTE (7) 34 ; RIGHT
BYTE (7) 10 ; LEFT
BYTE (7) "Y"-100 ; HOME
BYTE (7) 13 ;CLEAR TO END OF PAGE
BYTE (7) 35 ;CLEAR TO END OF LINE
BYTE (7) 12 ;ROLL UP AND CLEAR LINE
BYTE (7) 0 ;ROLL DOWN AND CLEAR LINE
BYTE (7) 0 ;PROTECT ON (CPOPJ IF NONE)
BYTE (7) 0 ;PROTECT OFF (CPOPJ IF NONE)
BYTE (7) 0 ;INSERT LINE (0 IF NONE)
BYTE (7) 0 ;INSERT SPACE (0 IF NONE)
BYTE (7) 0 ;DELETE LINE (0 IF NONE)
BYTE (7) 0 ;DELETE SPACE (0 IF NONE)
BYTE (7) 36," ","7" ;MOVE TO BOTTOM
BYTE (7) 14 ;HOME AND CLEAR ENTIRE PAGE
CDM152 ;ROUTINE TO POSITION TO CHARACTER
LDM152 ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
IFE FDM52F,<
WRP!MRK ;TERMINAL-DEPENDENT FLAGS
>
IFN FDM52F,<
WRP!MRK!NPG ;TERMINAL-DEPENDENT FLAGS (KEEP TTY PAGE)
>
EDM152 ;ROUTINE TO CALL ON ENTRY
CPOPJ ;ROUTINE TO CALL ON EXIT
0,,0 ;NUMBER OF NULLS TO OUTPUT,,NULL CHARACTER
IDM152 ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
"~" ;MARK TO DISPLAY ON ENTER (OMIT IF MRK NOT SET)
;TERMINAL INPUT TABLE - TELLS WHAT CONTROL CHARACTERS OR SEQUENCES
;INVOKE WHICH COMMANDS
IFE FDM52F,<
0 ;CODE FOR RUBOUT (0==RESET)
IDM152: EXP 40, 1, 2, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,34,13,14,15,16,17
EXP 20,21,22,23,24,25,26,27
EXP 30,31,32
-SDM5.S,,SDM5.T ;ESCAPE NEEDS A SUBTABLE
EXP 35,33,37,36 ;ENTER==CONTROL-]
>
IFN FDM52F,<
;THIS TABLE SETS UP THE KEYBOARD ARRANGEMENT FOR WHEN YOU NEED TO KEEP
;TTY PAGE IN EFFECT BECAUSE THE TERMINAL SENDS OUT ITS OWN CONTROL S AND Q'S
;THOSE TWO CHARACTERS CANNOT BE COMMANDS SINCE SED DOES NOT KNOW WHETHER THE
;USER HAS TYPED THEM OR THEY WERE SENT BY THE TERMINAL.
;SO Q GOES TO A, A AND S GO TO K AND L, K TO ESCAPE-L, AND L TO ESCAPE-T.
0 ;COMMAND FOR RUBOUT (RESET)
IDM152: EXP 40,21, 2, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,34, 1,23,15,16,17
EXP 20, 0,22, 0,24,25,26,27
EXP 30,31,32
-SDM5.S,,SDM5.T
EXP 35,33,37,36 ;ENTER==CONTROL-]
>
;SUBTABLE. PUT THE MOST FREQUENTLY-USED SEQUENCES FIRST
;ENTER IS PROBABLY THE MOST COMMON OF ALL
SDM5.T: 45,,"L" ;ESCAPE L == LINE
45,,"l"
42,,"D" ;ESCAPE D == DELETE-CHARACTER
42,,"d"
43,,"T" ;ESCAPE T == REAL-TAB
43,,"t"
40,,"Q" ;ESCAPE Q == RECALL
40,,"q"
41,,"I" ;ESCAPE I == INSERT-MODE
41,,"i"
44,,"M" ;ESCAPE M == MARK
44,,"m"
46,,"C" ;ESCAPE C == CASE
46,,"c"
50,,"K" ;ESCAPE K == ERASE-LINE
50,,"k"
47,,"W" ;ESCAPE W == WINDOW
47,,"w"
IFN FDM52F,<
13,,"L" ;ESCAPE L == SLIDE-LEFT
14,,"R" ;ESCAPE R == SLIDE-RIGHT
13,,"l" ;ESCAPE l == SLIDE-LEFT
14,,"r" ;ESCAPE r == SLIDE-RIGHT
>
SDM5.S=.-SDM5.T
;ROUTINE TO CALL ON ENTRY
EDM152:
IFN ..IDX-1,<JRST DECIDE>
POPJ P,
;SUBROUTINE TO MOVE TO ROW (RW), COLUMN (CM)
CDM152: MOVEI T1,36
IDPB T1,TY ;START IT OFF
MOVEI T1,40(CM) ;GET COLUMN POSITION
IDPB T1,TY
MOVEI T1,40(RW) ;GET ROW POSITION
IDPB T1,TY
POPJ P, ;DONE
;SUBROUTINE TO MOVE TO START OF LINE (T4)
LDM152: MOVEI T1,36
IDPB T1,TY ;START IT OFF
MOVEI T1,40 ;MOVE TO COLUMN ZERO
IDPB T1,TY
MOVEI T1,40(T4) ;GET ROW POSITION
IDPB T1,TY
POPJ P, ;DONE
>
IFN FDDISK,<
ODDISK: XDDISK
>
IFN FDMELT,<
;DEFINITIONS FOR THE DATAMEDIA ELITE
FDMELF==0 ;SET THIS IF TERMINAL SENDS OUT XON-XOFF'S
;TERMINAL OUTPUT TABLE - SEQUENCES TO MAKE THE TERMINAL DO SPECIAL THINGS
ODMELT: BYTE (7) 37 ;CURSOR UP
BYTE (7) 12 ; DOWN
BYTE (7) 34 ; RIGHT
BYTE (7) 10 ; LEFT
BYTE (7) 31 ; HOME
BYTE (7) 13 ;CLEAR TO END OF PAGE
BYTE (7) 35 ;CLEAR TO END OF LINE
BYTE (7) 12 ;ROLL UP AND CLEAR LINE
BYTE (7) 0 ;ROLL DOWN AND CLEAR LINE
BYTE (7) 0 ;PROTECT ON (0 IF NONE)
BYTE (7) 0 ;PROTECT OFF (0 IF NONE)
BYTE (7) 0 ;INSERT LINE (0 IF NONE)
BYTE (7) 0 ;INSERT SPACE (0 IF NONE)
BYTE (7) 0 ;DELETE LINE (0 IF NONE)
BYTE (7) 0 ;DELETE SPACE (0 IF NONE)
BYTE (7) 36," ","7" ;MOVE TO BOTTOM
BYTE (7) 14 ;HOME AND CLEAR ENTIRE PAGE
CDMELT ;ROUTINE TO POSITION TO CHARACTER
LDMELT ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
IFE FDMELF,<
SLW!WRP!MRK ;TERMINAL-DEPENDENT FLAGS
>
IFN FDMELF,<
SLW!WRP!MRK!NPG ;TERMINAL-DEPENDENT FLAGS (KEEP TTY PAGE)
>
EDMELT ;ROUTINE TO CALL ON ENTRY
CPOPJ ;ROUTINE TO CALL ON EXIT
0,,0 ;NUMBER OF NULLS TO OUTPUT,,NULL CHARACTER
IDMELT ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
"*" ;MARK TO DISPLAY ON ENTER (OMIT IF MRK NOT SET)
;TERMINAL INPUT TABLE - TELLS WHAT CONTROL CHARACTERS OR SEQUENCES
;INVOKE WHICH COMMANDS
IFE FDMELF,<
EXP $RESET ;RUBOUT
IDMELT: EXP $RECAL, $RLBKP, $SETFI ; 0, A, B
EXP $ABORT, $INSLN, $SRCBK, $DELLN ;C, D, E, F
EXP $PUT, $CURLF, $TAB, $CURDN ;G, H, I, J
EXP $SLDLF, $SLDRT, $RETRN, $SWTCH ;K, L, M, N
EXP $ENTCC, $GOTO, $RLBKP, $SRCFW ;O, P, Q, R
EXP $DELSP, $RLFWL, $BKTAB, $PICK ;S, T, U, V
EXP $RLBKL, $EXEC, $CURHM, $EXIT ;W, X, Y, Z
EXP -SDME.S,,SDME.T ;ESCAPE
EXP $CURRT, $ENTER, $CURHM, $DELCH ;\, ], ^, _
>
IFN FDMELF,<
;THIS TABLE SETS UP THE KEYBOARD ARRANGEMENT FOR WHEN YOU NEED TO KEEP
;TTY PAGE IN EFFECT BECAUSE THE TERMINAL SENDS OUT ITS OWN CONTROL S AND Q'S
;THOSE TWO CHARACTERS CANNOT BE COMMANDS SINCE SED DOES NOT KNOW WHETHER THE
;USER HAS TYPED THEM OR THEY WERE SENT BY THE TERMINAL.
;SO Q GOES TO A, A AND S GO TO K AND L, K TO ESCAPE-L, AND L TO ESCAPE-T
;NOTE: this table has not been altered for the Datamedia.
EXP $RESET ;RUBOUT
IDMELT: EXP $RECAL, $RLBKP, $SETFI ; 0, A, B
EXP $ABORT, $INSLN, $SRCBK, $DELLN ;C, D, E, F
EXP $PUT, $DELCH, $TAB, $ERSLN ;G, H, I, J
EXP $INSSP, $DELSP, $RETRN, $SWTCH ;K, L, M, N
EXP $ENTCC, $GOTO, 0, $SRCFW ;O, P, Q, R
EXP 0, $RLFWL, $BKTAB, $PICK ;S, T, U, V
EXP $RLBKL, $EXEC, $RLFWP, $EXIT ;W, X, Y, Z
-SDME.S,,SDME.T ;ESCAPE
EXP $CURDN, $CURRT, $CURUP, $CURHM ;\, ], ^, _
>
;SUBTABLE. PUT THE MOST FREQUENTLY-USED SEQUENCES FIRST
;ENTER IS PROBABLY THE MOST COMMON OF ALL
SDME.T: $SETFI,,"F" ;ESCAPE F == SET-FILE
$SAVE ,,"S" ;ESCAPE S == SAVE-FILE
$EXIT ,,"E" ;ESCAPE E == EXIT
$WINDW,,"W" ;ESCAPE W == WINDOW
$REWRT,,"X" ;ESCAPE X == REWRITE
$CASE ,,"C" ;ESCAPE C == CASE
$HELP ,,"H" ;ESCAPE H == HELP
$INSSP,,"I" ;ESCAPE I == INSERT-SPACES
$INMOD,,"M" ;ESCAPE M == INSERT-MODE
$SLDLF,,"L" ;ESCAPE L == SLIDE-LEFT
$SLDRT,,"R" ;ESCAPE R == SLIDE-RIGHT
$RLFWP,,"P" ;ESCAPE P == ROLL-FORWARD-PAGES
$RLTAB,,"T" ;ESCAPE T == REAL-TAB
$RECAL,,"?" ;ESCAPE ? == RECALL
$ENTER,,33 ;ESCAPE ESCAPE == ENTER
$PUSH ,,"^" ;ESCAPE ^ == PUSH
$MARK ,,"\" ;ESCAPE \ == MARK
$SETFI,,"f" ;ESCAPE f == SET-FILE
$SAVE ,,"s" ;ESCAPE s == SAVE-FILE
$EXIT ,,"e" ;ESCAPE e == EXIT
$WINDW,,"w" ;ESCAPE w == WINDOW
$REWRT,,"x" ;ESCAPE x == REWRITE
$CASE ,,"c" ;ESCAPE c == CASE
$HELP ,,"h" ;ESCAPE h == HELP
$INSSP,,"i" ;ESCAPE i == INSERT-SPACES
$INMOD,,"m" ;ESCAPE m == INSERT-MODE
$SLDLF,,"l" ;ESCAPE l == SLIDE-LEFT
$SLDRT,,"r" ;ESCAPE r == SLIDE-RIGHT
$RLFWP,,"p" ;ESCAPE p == ROLL-FORWARD-PAGES
$RLTAB,,"t" ;ESCAPE t == REAL-TAB
IFN FDMELF,<
;IF TTY PAGE IS IN EFFECT,
;DEFINE SEQUENCES FOR
;<SLIDE-LEFT> AND <SLIDE-RIGHT> HERE
>
SDME.S=.-SDME.T
;ROUTINE TO CALL ON ENTRY
EDMELT:
IFN ..IDX-1,<JRST DECIDE>
POPJ P,
;DATAMEDIA SUBROUTINE TO MOVE TO ROW, COLUMN [RW, CM]
CDMELT: MOVEI T1,36
IDPB T1,TY
MOVEI T1," "(CM)
IDPB T1,TY
MOVEI T1," "(RW)
IDPB T1,TY
POPJ P,
;DATAMEDIA SUBROUTINE TO MOVE TO THE START OF ROW (T4)
LDMELT: MOVEI T1,36
IDPB T1,TY
MOVEI T1," "
IDPB T1,TY
MOVEI T1," "(T4)
IDPB T1,TY
POPJ P,
>
IFN FH1500,<
;EDITOR TERMINAL DEFINITIONS FOR THE HAZELTINE 1500
;EVERYTHING IS USUAL, EXCEPT:
; ENTER - ESCAPE ESCAPE
; CURSOR-UP - ESCAPE U (OR u)
; CURSOR-DOWN - ESCAPE D (OR d)
; CURSOR-RIGHT - CONTROL-P
; CURSOR-LEFT - CONTROL-H
; CURSOR-HOME - ESCAPE H (OR h)
; PERCENT-GOTO - ESCAPE P
FH150F==0 ;SET THIS IS TERMINAL SENDS OUT XON-XOFF'S
;TERMINAL OUTPUT TABLE - SEQUENCES TO MAKE THE TERMINAL DO SPECIAL THINGS
OH1500: BYTE (7) "~",14 ;CURSOR UP
BYTE (7) "~",13 ; DOWN
BYTE (7) 20 ; RIGHT
BYTE (7) 10 ; LEFT
BYTE (7) "~",22 ; HOME
BYTE (7) "~",30 ;CLEAR TO END OF PAGE
BYTE (7) "~",17 ;CLEAR TO END OF LINE
BYTE (7) 12 ;ROLL UP AND CLEAR LINE
BYTE (7) "~",32 ;ROLL DOWN AND CLEAR LINE
BYTE (7) "~",37 ;PROTECT ON (CPOPJ IF NONE)
BYTE (7) "~",31 ;PROTECT OFF (CPOPJ IF NONE)
BYTE (7) "~",32 ;INSERT LINE (0 IF NONE)
BYTE (7) 0 ;INSERT SPACE (0 IF NONE)
BYTE (7) "~",23 ;DELETE LINE (0 IF NONE)
BYTE (7) 0 ;DELETE SPACE (0 IF NONE)
BYTE (7) "~",21,140,27 ;MOVE TO BOTTOM
BYTE (7) "~",34 ;HOME AND CLEAR PAGE
CH1500 ;ROUTINE TO POSITION TO CHARACTER
LH1500 ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
IFE FH150F,<
WRP ;TERMINAL-DEPENDENT FLAGS (WRAPAROUND)
>
IFN FH150F,<
NPG!WRP ;TERMINAL-DEPENDENT FLAGS (KEEP TTY PAGE)
>
EH1500 ;ROUTINE TO CALL ON ENTRY
CPOPJ ;ROUTINE TO CALL ON EXIT
0,,0 ;NUMBER OF NULLS TO OUTPUT,,NULL CHARACTER
IH1500 ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
;TERMINAL INPUT TABLE - TELLS WHAT CONTROL CHARACTERS OR SEQUENCES
;INVOKE WHICH COMMANDS
IFE FH150F,<
0 ;COMMAND FOR RUBOUT (0==RESET)
IH1500: EXP 40, 1, 2, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,12,13,14,15,16,17
EXP 35,21,22,23,24,25,26,27
EXP 30,31,32
-SH15.S,,SH15.T ;ESCAPE NEEDS A SUBTABLE
EXP 34,35,36,37
>
IFN FH150F,<
;THIS TABLE SETS UP THE KEYBOARD ARRANGEMENT FOR WHEN YOU NEED TO KEEP
;TTY PAGE IN EFFECT BECAUSE THE TERMINAL SENDS OUT ITS OWN CONTROL S AND Q'S
;THOSE TWO CHARACTERS CANNOT BE COMMANDS SINCE SED DOES NOT KNOW WHETHER THE
;USER HAS TYPED THEM OR THEY WERE SENT BY THE TERMINAL.
;SO Q GOES TO A, A AND S GO TO B AND N, B TO ESCAPE-F, AND N TO ESCAPE-S.
0 ;COMMAND FOR RUBOUT (RESET)
IH1500: EXP 40,21, 1, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,12,13,14,15,23,17
EXP 35, 0,22, 0,24,25,26,27
EXP 30,31,32
-SH15.S,,SH15.T
EXP 34,35,36,37
>
;SUBTABLE. PUT THE MOST FREQUENTLY-USED SEQUENCES FIRST
;ENTER IS PROBABLY THE MOST COMMON OF ALL
SH15.T: 33,,33 ;ESC ESC == ENTER
37,,"H" ;ESCAPE H == HOME
37,,"h" ;ESCAPE h == HOME
36,,"U" ;ESCAPE U == UP
36,,"u" ;ESCAPE u == UP
34,,"D" ;ESCAPE D == DOWN
34,,"d" ;ESCAPE d == DOWN
35,,"P" ;ESCAPE P == PERCENT-GOTO
IFN FH150F,<
02,,"F" ;ESCAPE F == SET-FILE
16,,"S" ;ESCAPE S == SWITCH
>
SH15.S=.-SH15.T
;ROUTINE TO CALL ON ENTRY
EH1500:
IFN ..IDX-1,<JRST DECIDE>
POPJ P,
;CURSOR POSITIONING ROUTINES
;MOVE TO ROW (RW), COLUMN (CM)
CH1500: MOVE T1,[BYTE (7) 176,21]
PUSHJ P,PUTSQ1 ;START IT OFF
SKIPN T1,CM ;GET COLUMN POSITION - ZERO?
ADDI T1,^D96 ;YES - SEND ALTERNATE CODE
IDPB T1,TY
SKIPN T1,RW ;GET ROW POSITION - ZERO?
ADDI T1,^D96 ;YES - USE ALTERNATE CODE
IDPB T1,TY
POPJ P, ;DONE
;MOVE TO START OF LINE (T4)
LH1500: MOVE T1,[BYTE (7) 176,21]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,^D96 ;SET TO COLUMN ZERO
IDPB T1,TY
SKIPN T1,T4 ;GET ROW POSITION - ZERO?
ADDI T1,^D96 ;YES - USE ALTERNATE CODE
IDPB T1,TY
POPJ P, ;DONE
>
IFN FZEH19,<
;TERMINAL DEFINITIONS FOR THE ZENITH H19
;TERMINAL OUTPUT TABLE - SEQUENCES TO MAKE THE TERMINAL DO SPECIAL THINGS
OZEH19: BYTE (7) 33,"A" ;CURSOR UP
BYTE (7) 33,"B" ; DOWN
BYTE (7) 33,"C" ; RIGHT
BYTE (7) 33,"D" ; LEFT
BYTE (7) 33,"H" ; HOME
BYTE (7) 33,"J" ;CLEAR TO END OF PAGE
BYTE (7) 33,"K" ;CLEAR TO END OF LINE
BYTE (7) 12 ;ROLL UP AND CLEAR LINE
BYTE (7) 33,"I" ;ROLL DOWN AND CLEAR LINE
BYTE (7) 33,"p" ;PROTECT ON (CPOPJ IF NONE)
BYTE (7) 33,"q" ;PROTECT OFF (CPOPJ IF NONE)
BYTE (7) 33,"L" ;INSERT LINE (0 IF NONE)
BYTE (7) 33,"@"," ",33,"O" ;INSERT SPACE (0 IF NONE)
BYTE (7) 33,"M" ;DELETE LINE (0 IF NONE)
BYTE (7) 33,"N" ;DELETE SPACE (0 IF NONE)
BYTE (7) 33,"Y","7"," " ;MOVE TO BOTTOM
BYTE (7) 33,"E" ;HOME AND CLEAR ENTIRE PAGE
CZEH19 ;ROUTINE TO POSITION TO CHARACTER
LZEH19 ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
NPG!TBS ;TERMINAL-DEPENDENT FLAGS (KEEP TTY PAGE)
EZEH19 ;ROUTINE TO CALL ON ENTRY
XZEH19 ;ROUTINE TO CALL ON EXIT
0,,0 ;NUMBER OF NULLS TO OUTPUT,,NULL CHARACTER
IZEH19 ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
;TERMINAL INPUT TABLE - TELLS WHAT CONTROL CHARACTERS OR SEQUENCES
;INVOKE WHICH COMMANDS
0 ;COMMAND FOR RUBOUT (RESET)
IZEH19: EXP 40, 0, 2, 3, 0, 0,55, 0 ;^F IS SAVE-FILE
EXP 42,11, 0, 0,13,15,25,17 ;^U IS CASE
EXP 20, 0,14, 0, 0,46,16,47 ;^W IS WINDOW
EXP 30, 0,32
-SZ19.S,,SZ19.T
EXP 34,35,36,37
;SUBTABLES FOR ESCAPE
SZ19.T: 41,,"P" ;ESC P == INSERT-MODE (BLUE)
37,,"H" ;ESC H == HOME
36,,"A" ;ESC A == UP
34,,"B" ;ESC B == DOWN
35,,"C" ;ESC C == RIGHT
10,,"D" ;ESC D == LEFT
07,,"Q" ;ESC Q == PUT (RED)
01,,"@" ;ESC @ == OPEN SPACES
04,,"L" ;ESC L == INSERT LINES
06,,"M" ;ESC M == DELETE LINES
12,,"J" ;ESC J == ERASE LINE
26,,"R" ;ESC R == PICK (WHITE)
23,,"N" ;ESC N == CLOSE SPACES
SCHSUB,,"S" ;ESC S == LOOK FURTHER (F1)
LNESUB,,"T" ;ESC T == LOOK FURTHER (F2)
PGESUB,,"U" ;ESC U == LOOK FURTHER (F3)
BAKSUB,,"V" ;ESC V == LOOK FURTHER (F4)
FRWSUB,,"W" ;ESC W == LOOK FURTHER (F5)
IAZE19,,"?" ;ESC ? == LOOK FURTHER
SZ19.S==.-SZ19.T
IAZE19: 33,,"M" ;ESC ? M == ENTER (ENT)
40,,"n" ;ESC ? N == RECALL (.)
42,,"y" ;ESC ? Y == DEL-CHAR (SDC)
43,,"p" ;ESC ? P == REAL-TAB (0)
44,,"u" ;ESC ? U == MARK (S5)
45,,"q" ;ESC ? Q == LINE (S1)
53,,"r" ;ESC ? r == DOWN TAB (S2)
52,,"x" ;ESC ? x == UP TAB (S8)
57,,"t" ;ESC ? t == BEGIN LINE (S4)
60,,"v" ;ESC ? v == END LINE (S6)
61,,"s" ;ESC ? s == ERASE WORD (S3)
45,,"q" ;ESC ? Q == LINE (S1)
54,,"w" ;ESC ? w == REPAINT SCREEN (S7)
0
SCHSUB: SCHTBL,,33 ;ESC S ESC == LOOK FURTHER
0
SCHTBL: 05,,"V" ;ESC S ESC V == SEARCH-BACK
22,,"W" ;ESC S ESC W == SEARCH-FORWARD
0
LNESUB: LNETBL,,33 ;ESC T ESC == LOOK FURTHER
0
LNETBL: 24,,"W" ;ESC T ESC W == ROLL-FORW-LINES (F2,F5)
27,,"V" ;ESC T ESC V == ROLL-BACK-LINES (F2,F4)
0
PGESUB: PGETBL,,33 ;ESC U ESC == LOOK FURTHER
0
PGETBL: 21,,"V" ;ESC U ESC V == ROLL-BACK-PAGES (F3,F4)
31,,"W" ;ESC U ESC W == ROLL-FORW-PAGES (F3,F5)
0
BAKSUB: BAKTBL,,33 ;ESC V ESC == LOOK FURTHER
0
BAKTBL: 21,,"U" ;ESC V ESC U == ROLL-BACK-PAGES (F4,F3)
27,,"T" ;ESC V ESC T == ROLL-BACK-LINES (F4,F2)
05,,"S" ;ESC V ESC S == SEARCH-BACK (F4,F1)
0
FRWSUB: FRWTBL,,33 ;ESC W ESC == LOOK FURTHER
0
FRWTBL: 22,,"S" ;ESC W ESC S == SEARCH-FORWARD (F5,F1)
24,,"T" ;ESC W ESC T == ROLL-FORW-LINES (F5,F2)
31,,"U" ;ESC W ESC U == ROLL-FORW-PAGES (F5,F3)
0
;ROUTINE CALLED ON ENTRY: SET UP KEYPAD IN APPLICATION MODE
EZEH19:
IFN ..IDX-1,<JRST DECIDE>
IFE TOPS10,<
MOVEI T1,.PRIIN
RFMOD
TLO T2,100000 ; TERMINAL HAS TABS
STPAR
>
HRROI T1,[BYTE (7) 33,"x","1",33,"Y",70,40,33,"p",0]
IFN TOPS10,<
OUTSTR (T1)
>
IFE TOPS10,<
PSOUT
>
HRROI T1,[ASCIZ / SEARCH LINE PAGE BACK FORWARD CLEAR INSERT PUT PICK /]
IFN TOPS10,<
OUTSTR (T1)
>
IFE TOPS10,<
PSOUT
>
MOVE T1,[BYTE (7) 33,"=",33,"t",33,"q",33,"H",0]
PUSHJ P,PUTSQ1
JRST PUTTYP
;SUBROUTINE CALLED ON EXIT: RESTORE KEYPAD TO NON-APPLICATION MODE
XZEH19: MOVE T1,[BYTE (7) 33,"Z"]
PUSHJ P,PUTSQ1
JRST PUTTYP
;POSITIONING ALGORITHMS
CZEH19: MOVE T1,[BYTE (7) 33,"Y"]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(RW) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40(CM) ;GET COLUMN POSITION
IDPB T1,TY
POPJ P, ;DONE
LZEH19: MOVE T1,[BYTE (7) 33,"Y"]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(T4) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40 ;MOVE TO COLUMN 0
IDPB T1,TY
POPJ P, ;DONE
>
IFN FMEM2A,<
;MIME2A TERMINAL DEFINITIONS FOR THE EDITOR
FMM2AF==1 ;SET THIS IF TERMINAL SENDS OUT XON-XOFF'S
OMEM2A: BYTE (7) 33,"A" ;CURSOR UP
BYTE (7) 33,"B" ; DOWN
BYTE (7) 33,"C" ; RIGHT
BYTE (7) 10 ; LEFT
BYTE (7) 33,"H" ; HOME
BYTE (7) 33,"J" ;CLEAR PAGE
BYTE (7) 33,"K" ;CLEAR LINE
BYTE (7) 12 ;ROLL UP AND CLEAR LINE
BYTE (7) 33,"I" ;ROLL DOWN AND CLEAR LINE
BYTE (7) 33,"S","J" ;PROTECT ON (START REVERSE VIDEO)
BYTE (7) 33,"S","@" ;PROTECT OFF (END REVERSE VIDEO)
BYTE (7) "A"-100 ;INSERT LINE
BYTE (7) "O"-100," ",7 ;INSERT SPACE
BYTE (7) "W"-100 ;DELETE LINE
BYTE (7) "N"-100 ;DELETE SPACE
BYTE (7) 33,"Y","7"," " ;MOVE TO BOTTOM
BYTE (7) 33,"H",33,"J" ;HOME AND CLEAR PAGE
CMEM2A ;ROUTINE TO POSITION TO CHARACTER
LMEM2A ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
IFE FMM2AF,<
SLW!TBS ;FLAGS (SHORT MESSAGES,HARD TABS)
>
IFN FMM2AF,<
SLW!TBS!NPG ;FLAGS (SHORT MSG, HARD TABS, KEEP TTY PAGE)
>
EMEM2A ;ROUTINE TO CALL ON ENTRY
XMEM2A ;ROUTINE TO CALL ON EXIT
0 ;NO NULLS NEEDED
IMEM2A ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
"~" ;MARK TO DISPLAY ON ENTER
IFE FMM2AF,<
0 ;COMMAND FOR RUBOUT (RESET)
IMEM2A EXP 40, 1, 2, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,50,13,14,15,16,17
EXP 20,21,22,23,24,25,26,27
EXP 30,31,32
-SM2A.S,,SM2A.T ;ESCAPE NEEDS A SUBTABLE
EXP 34,35,36,37
>
IFN FMM2AF,<
;THIS TABLE SETS UP THE KEYBOARD ARRANGEMENT FOR WHEN YOU NEED TO KEEP
;TTY PAGE IN EFFECT BECAUSE THE TERMINAL SENDS OUT ITS OWN CONTROL S AND Q'S
;THOSE TWO CHARACTERS CANNOT BE COMMANDS SINCE SED DOES NOT KNOW WHETHER THE
;USER HAS TYPED THEM OR THEY WERE SENT BY THE TERMINAL.
;SO Q GOES TO A, A AND S GO TO B AND N, B TO ESCAPE-1k, AND N TO ESCAPE-2k.
0 ;COMMAND FOR RUBOUT (RESET)
IMEM2A: EXP 40,21, 1, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,50,13,14,15,23,17
EXP 20, 0,22, 0,24,25,26,27
EXP 30,31,32
-SM2A.S,,SM2A.T ;ESCAPE NEEDS A SUBTABLE
EXP 34,35,36,37
>
SM2A.T: 36,,"A" ;ESCAPE A == UP
34,,"B" ;ESCAPE B == DOWN
35,,"C" ;ESCAPE C == RIGHT
10,,"D" ;ESCAPE D == LEFT
33,,"P" ;ESCAPE P == ENTER
40,,"Q" ;ESCAPE Q == RECALL
37,,"R" ;ESCAPE R == HOME
M2A.TT,,"?" ;ESCAPE ? == CHECK SOME MORE
SM2A.S==.-SM2A.T
M2A.TT: 41,,"M" ;ESCAPE ? M == INSERT-MODE
42,,"n" ;ESCAPE ? n == DELETE-CHARACTER
43,,"p" ;ESCAPE ? p == REAL TAB
44,,"w" ;ESCAPE ? w == MARK
45,,"x" ;ESCAPE ? x == LINE
46,,"y" ;ESCAPE ? y == CASE
IFN FMM2AF,<
02,,"q" ;ESCAPE ? q == SET-FILE
16,,"r" ;ESCAPE ? r == SWITCH
>
47,,"s" ;ESCAPE ? s == WINDOW
0
;ROUTINE CALLED ON ENTRY: SET UP KEYPAD IN APPLICATION MODE
EMEM2A:
IFN ..IDX-1,<JRST DECIDE>
MOVE T1,[BYTE (7) 33,"="]
PUSHJ P,PUTSQ1
MOVE T1,[BYTE (7) 33,"S","@"]
PUSHJ P,PUTSQ1 ; SET UP DEFAULT VIDEO ATTRIBUTES
MOVE T1,[BYTE (7) 33,";"]
PUSHJ P,PUTSQ1 ; SET UP MIME2A IN JUMP SCROLL MODE
JRST PUTTYP
;ROUTINE CALLED ON EXIT: RESTORE KEYPAD TO NON-APPLICATION MODE
XMEM2A: MOVE T1,[BYTE (7) 33,76,33,":"]
PUSHJ P,PUTSQ1 ; RESET MIME2A TO SMOOTH SCROLL MODE
JRST PUTTYP
;POSITIONING ALGORITHMS
CMEM2A: MOVE T1,[BYTE (7) 33,"Y"]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(RW) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40(CM) ;GET COLUMN POSITION
IDPB T1,TY
POPJ P, ;DONE
LMEM2A: MOVE T1,[BYTE (7) 33,"Y"]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(T4) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40 ;MOVE TO COLUMN ZERO
IDPB T1,TY
POPJ P,
>
IFN FONTEL,<
OONTEL: XONTEL
>
IFN FIQ120,<
;SOROC IQ 120 TERMINAL DEFINITIONS
FIQ12F==0 ;SET THIS IF TERMINAL SENDS OUT XON-XOFF'S
;TERMINAL OUTPUT TABLE - SEQUENCES TO MAKE THE TERMINAL DO SPECIAL THINGS
OIQ120: BYTE (7) 13 ;CURSOR UP
BYTE (7) 12 ; DOWN
BYTE (7) 14 ; RIGHT
BYTE (7) 10 ; LEFT
BYTE (7) "^"-100 ; HOME
BYTE (7) 33,"Y" ;CLEAR TO END OF PAGE
BYTE (7) 33,"T" ;CLEAR TO END OF LINE
BYTE (7) 12 ;ROLL UP AND CLEAR LINE
BYTE (7) 0 ;ROLL DOWN AND CLEAR LINE
BYTE (7) 33,")" ;PROTECT ON (CPOPJ IF NONE)
BYTE (7) 33,"(" ;PROTECT OFF (CPOPJ IF NONE)
BYTE (7) 0 ;INSERT LINE (0 IF NONE)
BYTE (7) 0 ;INSERT SPACE (0 IF NONE)
BYTE (7) 0 ;DELETE LINE (0 IF NONE)
BYTE (7) 0 ;DELETE SPACE (0 IF NONE)
BYTE (7) 33,"=","7"," " ;MOVE TO BOTTOM
BYTE (7) 33,"*" ;HOME AND CLEAR ENTIRE PAGE
CIQ120 ;ROUTINE TO POSITION TO CHARACTER
LIQ120 ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
IFE FIQ12F,<
WRP!NEL!SLW ;TERMINAL-DEPENDENT FLAGS
>
IFN FIQ12F,<
WRP!NEL!SLW!NPG ;TERMINAL-DEPENDENT FLAGS (KEEP TTY PAGE)
>
EIQ120 ;ROUTINE TO CALL ON ENTRY
CPOPJ ;ROUTINE TO CALL ON EXIT
0,,0 ;NUMBER OF NULLS TO OUTPUT,,NULL CHARACTER
IIQ120 ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
;TERMINAL INPUT TABLE - TELLS WHAT CONTROL CHARACTERS OR SEQUENCES
;INVOKE WHICH COMMANDS
IFE FIQ12F,<
0 ;CODE FOR RUBOUT (0==RESET)
IIQ120: EXP 40, 1, 2, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,34,36,35,15,16,17
EXP 20,21,22,23,24,25,26,27
EXP 30,31,32
-SSIQ.S,,SSIQ.T ;ESCAPE NEEDS A SUBTABLE
EXP 34,35,37,37
>
IFN FIQ12F,<
;THIS TABLE SETS UP THE KEYBOARD ARRANGEMENT FOR WHEN YOU NEED TO KEEP
;TTY PAGE IN EFFECT BECAUSE THE TERMINAL SENDS OUT ITS OWN CONTROL S AND Q'S
;THOSE TWO CHARACTERS CANNOT BE COMMANDS SINCE SED DOES NOT KNOW WHETHER THE
;USER HAS TYPED THEM OR THEY WERE SENT BY THE TERMINAL.
;SO Q GOES TO A, A AND S GO TO K AND L, K TO ESCAPE-L, AND L TO ESCAPE-T.
;this needs work since K and L are cursor movement commands now
0 ;COMMAND FOR RUBOUT (RESET)
IIQ120: EXP 40,21, 2, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
EXP 10,11,34, 1,23,15,16,17
EXP 20, 0,22, 0,24,25,26,27
EXP 30,31,32
-SSIQ.S,,SSIQ.T
EXP 34,35,37,37
>
;SUBTABLE. PUT THE MOST FREQUENTLY-USED SEQUENCES FIRST
;ENTER IS PROBABLY THE MOST COMMON OF ALL
SSIQ.T: 33,,"E" ;ESCAPE E == ENTER
33,,"e"
50,,"K" ;ESCAPE K == ERASE-LINE
50,,"k"
43,,"T" ;ESCAPE T == REAL-TAB
43,,"t"
40,,"Q" ;ESCAPE Q == RECALL
40,,"q"
41,,"I" ;ESCAPE I == INSERT-MODE
41,,"i"
44,,"M" ;ESCAPE M == MARK
44,,"m"
44,,"D" ;ESCAPE D == INSERT-LINES
44,,"d" ; (VECTOR 1 MONITOR TRAPS CONTROL-D)
13,,"L" ;ESCAPE L == SLIDE-LEFT
13,,"l"
14,,"R" ;ESCAPE T == SLIDE-RIGHT
14,,"r"
47,,"W" ;ESCAPE W == WINDOW
47,,"w"
SSIQ.S=.-SSIQ.T
;ROUTINE TO CALL ON ENTRY
EIQ120:
IFN ..IDX-1,<JRST DECIDE>
POPJ P,
;SUBROUTINE TO MOVE TO ROW (RW), COLUMN (CM)
CIQ120: MOVE T1,[BYTE (7) 33,"="]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(RW) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40(CM) ;GET COLUMN POSITION
IDPB T1,TY
POPJ P, ;DONE
;SUBROUTINE TO MOVE TO START OF LINE (T4)
LIQ120: MOVE T1,[BYTE (7) 33,"="]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(T4) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40 ;MOVE TO COLUMN ZERO
IDPB T1,TY
POPJ P,
>
IFN FT4041,<
;TELRAY 4041 TERMINAL DEFINITIONS
;TERMINAL OUTPUT TABLE - SEQUENCES TO MAKE THE TERMINAL DO SPECIAL THINGS
OT4041: BYTE (7) 33,"A" ;CURSOR UP
BYTE (7) 33,"B" ; DOWN
BYTE (7) 33,"C" ; RIGHT
BYTE (7) 10 ; LEFT
BYTE (7) 33,"H" ; HOME
BYTE (7) 33,"J" ;CLEAR PAGE
BYTE (7) 33,"K" ;CLEAR EOL
BYTE (7) 12 ;ROLL UP AND CLEAR LINE
RD4041 ;ROLL DOWN AND CLEAR LINE
BYTE (7) 37 ;PROTECT ON (NONE)
0 ;PROTECT OFF
BYTE (7) 33,"L" ;INSERT LINE
BYTE (7) 33,"P" ;INSERT SPACE
BYTE (7) 33,"M" ;DELETE LINE
BYTE (7) 33,"Q" ;DELETE SPACE
BYTE (7) 33,"Y","7 " ;MOVE TO BOTTOM
BYTE (7) 33,"H",33,"J" ;HOME AND CLEAR PAGE
CT4041 ;ROUTINE TO POSITION TO CHARACTER
LT4041 ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
MRK!NPG ;FLAGS (no protect and leave page alone)
ET4041 ;ROUTINE TO CALL ON ENTRY
CPOPJ ;ROUTINE TO CALL ON EXIT
0,,0 ;NO NULLS NEEDED
IT4041 ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
"*" ;MARK TO DISPLAY ON ENTER
;ROLL DOWN AND CLEAR LINE
RD4041: MOVE T1,[BYTE (7) 33,"H",33,"L"]
PUSHJ P,PUTSQ1
PUSHJ P,PUTTYP
MOVEI T1,^D050 ;SLEEP .25 SECONDS
IFN TOPS10,<
HIBER T1,
JFCL
>
IFE TOPS10,<
DISMS
>
POPJ P,
IT4041: EXP 40,1,24,3,23,32,13,7 ;NOTHING SPECIAL
EXP 10,11,50,4,6,15,31,25
EXP 20,0,5,0,27,16,22,14
EXP 30,21,0,33
EXP 35,34,36
-ST41.S,,ST41.T
ST41.T: 37,,"H" ;ESCAPE H == HOME
02,,"F" ;ESCAPE F == SWITCH/SET FILE
26,,"S" ;ESCAPE S == SWITCH PARAMETERS
17,,"^" ;ESCAPE C == ENTER CONTROL CHAR
36,,"A" ;UP
34,,"B" ;DOWN
35,,"C" ;RIGHT
10,,"D" ;LEFT
33,,"P" ;ENTER
13,,"R" ;PICK
07,,"Q" ;PUT
ST41.S==.-ST41.T
;TERMINAL INPUT TABLE - TELLS WHAT CONTROL CHARACTERS OR SEQUENCES
;INVOKE WHICH COMMANDS
; 0 ;CODE FOR RUBOUT (0==RESET)
;IT4041: EXP 40, 1, 2, 3, 4, 5, 6, 7 ;NOTHING SPECIAL
; EXP 10,11,50,13,14,15,16,17
; EXP 20,21,22,23,24,25,26,27
; EXP 30,31,32
; -ST41.S,,ST41.T ;ESCAPE NEEDS A SUBTABLE
; EXP 34,35,36,37
;SUBTABLE. PUT THE MOST FREQUENTLY-USED SEQUENCES FIRST
;ENTER IS PROBABLY THE MOST COMMON OF ALL
;ST41.T: 33,,"P" ;ESCAPE P == ENTER
; 37,,"R" ;ESCAPE R == HOME
; 36,,"A" ;ESCAPE A == UP
; 34,,"B" ;ESCAPE B == DOWN
; 35,,"C" ;ESCAPE C == RIGHT
; 10,,"D" ;ESCAPE D == LEFT
; 40,,"Q" ;ESCAPE Q == RECALL
;ST41.S==.-ST41.T
;ROUTINE TO CALL ON ENTRY
ET4041:
IFN ..IDX-1,<JRST DECIDE>
POPJ P,
;POSITIONING ALGORITHMS
CT4041: MOVE T1,[BYTE (7) 33,"Y"]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(RW) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40(CM) ;GET COLUMN POSITION
IDPB T1,TY
POPJ P, ;DONE
LT4041: MOVE T1,[BYTE (7) 33,"Y"]
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(T4) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40 ;MOVE TO COLUMN ZERO
IDPB T1,TY
POPJ P,
>
IFN FVT52!FVT61,<
;TABLES TO SUPPORT THE DIGITAL VT52 TERMINAL
FVT52F==1 ;FLAG: TURN ON IF TERMINAL SENDS XON-XOFF'S
OVT61:
OVT52: BYTE (7) 33,"A" ;CURSOR UP
BYTE (7) 33,"B" ; DOWN
BYTE (7) 33,"C" ; RIGHT
BYTE (7) 10 ; LEFT
BYTE (7) 33,"H" ; HOME
BYTE (7) 33,"J" ;CLEAR PAGE
BYTE (7) 33,"K" ;CLEAR LINE
BYTE (7) 12 ;ROLL UP AND CLEAR LINE
BYTE (7) 33,"I" ;ROLL DOWN AND CLEAR LINE
CPOPJ ;PROTECT ON (NONE FOR A VT52)
CPOPJ ;PROTECT OFF
0 ;INSERT LINE (NONE)
0 ;INSERT SPACE (NONE)
0 ;DELETE LINE (NONE)
0 ;DELETE SPACE (NONE)
BYTE (7) 33,"Y","7"," " ;MOVE TO BOTTOM
BYTE (7) 33,"H",33,"J" ;HOME AND CLEAR PAGE
CVT52 ;ROUTINE TO POSITION TO CHARACTER
LVT52 ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
IFE FVT52F,<
MRK!TBS!SLW ;FLAGS (NO PROTECT, HARD TABS)
>
IFN FVT52F,<
MRK!TBS!NPG!SLW ;FLAGS (NO PROTECT, HARD TABS, KEEP TTY PAGE)
>
EVT52 ;ROUTINE TO CALL ON ENTRY
XVT52 ;ROUTINE TO CALL ON EXIT
0 ;NO NULLS NEEDED
IVT52 ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
"~" ;MARK TO DISPLAY ON ENTER
IFE FVT52F,<
EXP $RESET ;RUBOUT
IVT52: EXP $RECAL, $INSSP, $SETFI ; 0, A, B
EXP $ABORT, $INSLN, $SRCBK, $DELLN ;C, D, E, F
EXP $PUT, $DELCH, $TAB, $ERSLN ;G, H, I, J
EXP $SLDLF, $SLDRT, $RETRN, $SWTCH ;K, L, M, N
EXP $ENTCC, $GOTO, $RLBKP, $SRCFW ;O, P, Q, R
EXP $DELSP, $RLFWL, $BKTAB, $PICK ;S, T, U, V
EXP $RLBKL, $EXEC, $RLFWP, $EXIT ;W, X, Y, Z
-SV52.S,,SV52.T ;ESCAPE
EXP $PUSH, $JUSTI, $SUBST, $SAVE ;\, ], ^, _
>
IFN FVT52F,<
;THIS TABLE SETS UP THE KEYBOARD ARRANGEMENT FOR WHEN YOU NEED TO KEEP
;TTY PAGE IN EFFECT BECAUSE THE TERMINAL SENDS OUT ITS OWN CONTROL S AND Q'S
;THOSE TWO CHARACTERS CANNOT BE COMMANDS SINCE SED DOES NOT KNOW WHETHER THE
;USER HAS TYPED THEM OR THEY WERE SENT BY THE TERMINAL.
;SO Q GOES TO A, A AND S GO TO K AND L, K TO ESCAPE-L, AND L TO ESCAPE-T
EXP $RESET ;RUBOUT
IVT52: EXP $RECAL, $RLBKP, $SETFI ; 0, A, B
EXP $ABORT, $INSLN, $SRCBK, $DELLN ;C, D, E, F
EXP $PUT, $DELCH, $TAB, $ERSLN ;G, H, I, J
EXP $INSSP, $DELSP, $RETRN, $SWTCH ;K, L, M, N
EXP $ENTCC, $GOTO, 0, $SRCFW ;O, P, Q, R
EXP 0, $RLFWL, $BKTAB, $PICK ;S, T, U, V
EXP $RLBKL, $EXEC, $RLFWP, $EXIT ;W, X, Y, Z
-SV52.S,,SV52.T ;ESCAPE
EXP $PUSH, $JUSTI, $SUBST, $SAVE ;\, ], ^, _
>
SV52.T: $ENTER,,"P" ;ESCAPE P == ENTER
$CURHM,,"R" ;ESCAPE R == HOME
$CURUP,,"A" ;ESCAPE A == UP
$CURDN,,"B" ;ESCAPE B == DOWN
$CURRT,,"C" ;ESCAPE C == RIGHT
$CURLF,,"D" ;ESCAPE D == LEFT
$RECAL,,"Q" ;ESCAPE Q == RECALL
IAVT52,,"?" ;ESCAPE ? == CHECK SOME MORE
$TBSET,,"S" ;ESCAPE S == SET-TABS
$TBSET,,"s" ;ESCAPE s == SET-TABS
$JUSTI,,"J" ;ESCAPE J == JUSTIFY
$JUSTI,,"j" ;ESCAPE j == JUSTIFY
$MARKR,,"M" ;ESCAPE M == MARKER
$MARKR,,"m" ;ESCAPE m == MARKER
IFN FVT52F,<
$SLDLF,,"L" ;ESCAPE L == SLIDE-LEFT
$SLDRT,,"T" ;ESCAPE T == SLIDE-RIGHT
$SLDLF,,"l" ;ESCAPE l == SLIDE-LEFT
$SLDRT,,"t" ;ESCAPE t == SLIDE-RIGHT
>
SV52.S=.-SV52.T
IAVT52: $BLINE,,"t" ;ESCAPE ? t == START-OF-LINE
$ELINE,,"v" ;ESCAPE ? v == END-OF-LINE
$DNTAB,,"r" ;ESCAPE ? r == DOWN-TAB
$UPTAB,,"x" ;ESCAPE ? x == UP-TAB
$CASE ,,"y" ;ESCAPE ? y == CASE
$ERSWD,,"n" ;ESCAPE ? n == ERASE-WORD
$RLTAB,,"p" ;ESCAPE ? p == REAL-TAB
$MARK ,,"w" ;ESCAPE ? w == MARK
$INMOD,,"M" ;ESCAPE ? M == INSERT-MODE
$REWRT,,"u" ;ESCAPE ? u == REWRITE SCREEN
$WINDW,,"q" ;ESCAPE ? q == WINDOW
$HELP ,,"s" ;ESCAPE ? s == HELP
0
;POSITIONING ALGORITHMS
CVT52: MOVSI T1,(BYTE (7) 33,"Y")
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(RW) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40(CM) ;GET COLUMN POSITION
IDPB T1,TY
POPJ P, ;DONE
LVT52: MOVSI T1,(BYTE (7) 33,"Y")
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,40(T4) ;GET ROW POSITION
IDPB T1,TY
MOVEI T1,40 ;MOVE TO COLUMN ZERO
IDPB T1,TY
POPJ P,
;ROUTINE CALLED ON ENTRY: DECIDE WHETHER IT'S A VT52 OR VT100
;IF VT52, SET UP KEYPAD IN APPLICATION MODE; DONE
EVT52:
IFN ..IDX-1,<JRST DECIDE> ;IF MORE THAN ONE TERMINAL TYPE, FIND WHICH
MOVSI T1,(BYTE (7) 33,"=")
PUSHJ P,PUTSQ1 ;ENABLE THE ALTERNATE KEYBOARD
IFN FVT61,<
CAMN T4,[SIXBIT /VT61/] ;REALLY WANT A VT61?
JRST EVT61 ;YES - MODIFY THE TERMINAL TABLE FOR IT
>
JRST PUTTYP ;OUTPUT EVERYTHING AND RETURN
>
IFN FVT52!FVT61!FVT100!FVT102!FVT125!FGIGI,<
;ROUTINE CALLED ON EXIT: RESTORE KEYPAD TO NON-APPLICATION MODE
XVT52: MOVSI T1,(BYTE (7) 33,76) ;OUTPUT ESCAPE CLOSE-ANGLE-BRACKET
PUSHJ P,PUTSQ1
JRST PUTTYP
>
IFN FVT61,<
;TERMINAL TABLES FOR THE VT61
;(USES THE SAME INPUT, OUTPUT TABLES AND POSITIONING ROUTINES AS THE VT52)
IFN FVT61,<
EVT61: MOVE T1,[BYTE (7) 33,"P","F"]
MOVEM T1,ILN(TM) ;INSERT LINE SEQUENCE
MOVE T1,[BYTE (7) 33,"P","D"]
MOVEM T1,DLN(TM) ;DELETE LINE SEQUENCE
MOVE T1,[BYTE (7) 33,"O","J"]
MOVEM T1,PON(TM) ;PROTECT ON SEQUENCE
MOVE T1,[BYTE (7) 33,"O","j"]
MOVEM T1,POF(TM) ;PROTECT OFF SEQUENCE
MOVEI T1,NVT61
MOVEM T1,ISP(TM) ;INSERT SPACE ROUTINE
MOVE T1,[BYTE (7) 33,"P","S"]
MOVEM T1,DSP(TM) ;DELETE SPACE SEQUENCE
MOVEI T1,MRK ;CLEAR THE USE-MARK FLAG
ANDCAM T1,TCH(TM) ; SO THE CURSOR POSITION WILL BE HIGHLIGHTED
IFN FTIMD,<
MOVE T1,[BYTE (7) 33,"P","I"]
MOVEM T1,IMO(TM) ;SEQUENCE TO TURN INSERT MODE ON
MOVE T1,[BYTE (7) 33,"P","i"]
MOVEM T1,IMF(TM) ;AND TO TURN INSERT MODE OFF
>
JRST PUTTYP ;COMPLETE OUTPUT AND RETURN
;SUBROUTINE TO INSERT (T4) SPACES AT THE CURSOR
;need to start by clearing to end of line if line will wrap
NVT61: MOVE T1,[BYTE (7) 33,"P","I"]
PUSHJ P,PUTSQ1 ;GET INTO INSERT MODE
MOVEI T1," " ;GET A SPACE
IDPB T1,TY ;OPEN ONE SPACE
SOJG T4,.-1 ;LOOP THROUGH ALL SPACES
MOVE T1,[BYTE (7) 33,"P","i"]
JRST PUTSQ1 ;EXIT INSERT MODE AND RETURN
>
IFN FVT100!FVT102!FVT125!FGIGI,<
;TERMINAL TABLES FOR THE DIGITAL VT100
;(ALSO USED FOR OTHER DIGITAL VT100-LIKE TERMINALS)
;NOTE: THE WRP FLAG SHOULD NOT BE SET WHETHER OR NOT THE VT100 HAS WRAPAROUND
FV100F==1 ;FLAG: TURN ON IF TERMINAL SENDS XON-XOFF'S
OGIGI:
OVT102:
OVT125:
OVT100: BYTE (7) 33,"[","A" ;CURSOR UP
BYTE (7) 33,"[","B" ; DOWN
BYTE (7) 33,"[","C" ; RIGHT
BYTE (7) 33,"[","D" ; LEFT
BYTE (7) 33,"[","H" ; HOME
BYTE (7) 33,"[","J" ;CLEAR PAGE
BYTE (7) 33,"[","K" ;CLEAR LINE
BYTE (7) 33,"D" ;ROLL UP AND CLEAR LINE
BYTE (7) 33,"M" ;ROLL DOWN AND CLEAR LINE
BYTE (7) 33,"[","7","m" ;PROTECT ON
BYTE (7) 33,"[","0","m" ;PROTECT OFF
ILVT10 ;INSERT LINE
0 ;INSERT SPACE (NONE)
DLVT10 ;DELETE LINE
0 ;DELETE SPACE (NONE)
3777,,[BYTE (7) 33,"[","2","4",";","1","H"] ;MOVE TO BOTTOM
HVT100 ;HOME AND CLEAR PAGE
CVT100 ;ROUTINE TO POSITION TO CHARACTER
LVT100 ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
IFE FV100F,<
SLW!TBS ;FLAGS (SLOW TTY,TTY WRAPS,HARDWARE TABS)
>
IFN FV100F,<
NPG!SLW!TBS ;FLAGS (KEEP TTY PAGE AND ONES ABOVE)
>
EVT100 ;ROUTINE TO CALL ON ENTRY
XVT52 ;ROUTINE TO CALL ON EXIT
0,,0 ;NO NULLS NEEDED
IVT100 ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
GVT100 ;LIMIT SCROLLING REGION
3777,,[BYTE (7) 33,"[","0",";","2","4","r"] ;UN-LIMIT SCROLLING REGION
>>
IFN FTLSR,<
;SUBROUTINE TO LIMIT THE SCROLLING REGION TO T2,T3
GVT100: PUSH P,T3 ;SAVE ENDING ROW
PUSH P,T2 ;AND STARTING ROW
MOVSI T1,(BYTE (7) 33,"[")
PUSHJ P,PUTSQ1 ;START OFF THE SEQUENCE
POP P,T1 ;GET STARTING ROW
PUSHJ P,PUTNUM ;OUTPUT IT
MOVEI T1,";" ;DELIMIT STARTING, ENDING ROWS
IDPB T1,TY
POP P,T1 ;GET ENDING ROW
PUSHJ P,PUTNUM ;OUTPUT IT
MOVEI T1,"r" ;COMPLETE THE SEQUENCE
IDPB T1,TY
POPJ P, ;DONE
>
HVT100: MOVEI T1,[BYTE (7) 33,"[","H",33,"[" ;HOME AND CLEAR PAGE
BYTE (7) "J"]
PUSHJ P,PUTSTG
PUSHJ P,PUTTYP ;OUTPUT IT NOW
MOVEI T1,^D0100 ;DELAY JUST A LITTLE
IFN TOPS10,<
HIBER T1,
JFCL
>
IFE TOPS10,<
DISMS
>
POPJ P, ;THEN RETURN
>
IFN FVT100!FVT125!FGIGI,<
;INSERT (T4) LINES (USES LIMITED SCROLLING REGION)
ILVT10: PUSHJ P,SVT100 ;SET UP THE SCROLLING REGION
MOVSI T1,(BYTE (7) 33,"[")
PUSHJ P,PUTSQ1
PUSHJ P,GETROW ;GET THE CURRENT ROW IN T1
PUSHJ P,PUTNUM ;AND OUTPUT DECIMAL IN ASCII
MOVE T1,[BYTE (7) ";","0","H"]
PUSHJ P,PUTSQ1 ;AND MAKE SURE WE ARE THERE
PUSH P,T4
ILVT1A: MOVE T1,[BYTE (7) 33,"M"]
PUSHJ P,PUTSQ1 ;INSERT A LINE
SOJG T4,ILVT1A ;LOOP TO INSERT ALL THE LINES
POP P,T1 ;GET NUMBER OF LINES INSERTED
JUMPE CM,RVT100 ;DONE IF AT START OF LINE
SOSG T4,T1 ; OR IF ONLY ONE LINE
JRST RVT100
PUSHJ P,RVT100 ;NOW RESTORE THE INITIAL STATE
ILVT1B: MOVE T1,[BYTE (7) 33,"[","B"]
PUSHJ P,PUTSQ1 ;ELSE MOVE DOWN ONE LESS TIME THAN LINES
SOJG T4,ILVT1B ;LOOP TO INSERT ALL THE LINES
POPJ P,
;DELETE ONE LINE (USES LIMITED SCROLLING REGION)
DLVT10: MOVE T1,LPP(TM) ;ON ONE OF THE THE BOTTOM TWO LINES?
CAIG T1,2(RW)
; CAIG T1,1(RW)
JRST DLVT1S ;YES - HANDLE SPECIALLY
DLVT1A: PUSHJ P,SVT100 ;ELSE SET UP THE SCROLLING REGION
; MOVEI T1,[BYTE (7) 33,"[","2","4",";"
; BYTE (7) "0","H",33,"D"]
; PUSHJ P,PUTSTG
; PUSHJ P,RVT100
; JRST PUTTYP ;OUTPUT AND RETURN
MOVEI T1,[BYTE (7) 33,"[","2","4",";"
BYTE (7) "0","H"]
PUSHJ P,PUTSTG
DLVT1B: MOVE T1,[BYTE (7) 33,"D"]
PUSHJ P,PUTSQ1 ;DELETE A LINE
SOJG T2,DLVT1B ;LOOP TO DELETE ALL THE LINES
;FALL INTO RVT100 AND RETURN
RVT100: MOVEI T1,[BYTE (7) 33,"[","0",";","2"
BYTE (7) "4","r",33,"8"]
JRST PUTSTG ;OUTPUT AND RETURN
;HERE IF THE CURSOR IS ON ONE OF THE BOTTOM TWO LINES. DO AS TWO SPECIAL CASES.
DLVT1S: CAIE T1,2(RW) ;ON THE BOTTOM LINE?
JRST DLVTS1 ;YES - HANDLE SPECIALLY
JUMPE CM,DLVT1A ;JUMP IF AT START OF NEXT-TO-BOTTOM LINE
MOVE T1,[BYTE (7) 12,33,"[","K"]
PUSHJ P,PUTSQ1 ;ELSE JUST CLEAR THE BOTTOM LINE
MOVE T1,CUP(TM) ;MOVE UP AGAIN, AND RETURN
JRST PUTSEQ
DLVTS1: MOVE T1,[BYTE (7) 33,"[","K"]
JRST PUTSQ1 ;JUST CLEAR LINE OUT AND RETURN
;SET UP SCROLLING REGION FOR INSERT OR DELETE LINES
SVT100: MOVE T1,[BYTE (7) 33,"7",33,"["]
PUSHJ P,PUTSQ1
PUSHJ P,GETROW ;GET THE CURRENT ROW IN T1
PUSHJ P,PUTNUM ;OUTPUT DECIMAL NUMBER IN ASCII
MOVE T1,[BYTE (7) ";","2","4","r"]
JRST PUTSQ1
; PUSHJ P,PUTSQ1
; PUSHJ P,PUTTYP ;OUTPUT ALL THIS NOW AND RETURN
; SNOOZE 500
; POPJ P,
GETROW: MOVEI T1,1(RW) ;GET THE CURRENT ROW
ADD T1,HOMPOS ;ADD WINDOW OFFSET, IF ANY
JUMPE CM,CPOPJ ;IS THE CURSOR AT THE START OF THE ROW?
AOJA T1,CPOPJ ;NO - START ONE ROW FARTHER DOWN AND RETURN
>
IFN FVT100!FVT102!FVT125!FGIGI,<
;TERMINAL INPUT TABLE - TELLS WHICH CHARACTER SEQUENCES
;INVOKE WHICH COMMANDS
IFE FV100F,<
EXP $RESET ;RUBOUT
IVT100: EXP $RECAL, $INSSP, $SETFI ; 0, A, B
EXP $ABORT, $INSLN, $SRCBK, $DELLN ;C, D, E, F
EXP $PUT, $DELCH, $TAB, $ERSLN ;G, H, I, J
EXP $SLDLF, $SLDRT, $RETRN, $SWTCH ;K, L, M, N
EXP $ENTCC, $GOTO, $RLBKP, $SRCFW ;O, P, Q, R
EXP $DELSP, $RLFWL, $BKTAB, $PICK ;S, T, U, V
EXP $RLBKL, $EXEC, $RLFWP, $EXIT ;W, X, Y, Z
-SV10.S,,SV10.T ;ESCAPE
EXP $PUSH, $JUSTI, $SUBST, $MARKR ;\, ], ^, _
>
IFN FV100F,<
;THIS TABLE SETS UP THE KEYBOARD ARRANGEMENT FOR WHEN YOU NEED TO KEEP
;TTY PAGE IN EFFECT BECAUSE THE TERMINAL SENDS OUT ITS OWN CONTROL S AND Q'S
;THOSE TWO CHARACTERS CANNOT BE COMMANDS SINCE SED DOES NOT KNOW WHETHER THE
;USER HAS TYPED THEM OR THEY WERE SENT BY THE TERMINAL.
;SO Q GOES TO A, A AND S GO TO K AND L, K TO ESCAPE-L, AND L TO ESCAPE-T
EXP $RESET ;RUBOUT
IVT100: EXP $RECAL, $RLBKP, $SETFI ; 0, A, B
EXP $ABORT, $INSLN, $SRCBK, $DELLN ;C, D, E, F
EXP $PUT, $DELCH, $TAB, $ERSLN ;G, H, I, J
EXP $INSSP, $DELSP, $RETRN, $SWTCH ;K, L, M, N
EXP $ENTCC, $GOTO, 0, $SRCFW ;O, P, Q, R
EXP 0, $RLFWL, $BKTAB, $PICK ;S, T, U, V
EXP $RLBKL, $EXEC, $RLFWP, $EXIT ;W, X, Y, Z
-SV10.S,,SV10.T ;ESCAPE
EXP $PUSH, $JUSTI, $SUBST, $MARKR ;\, ], ^, _
>
;SUBTABLE. PUT THE MOST FREQUENTLY-USED SEQUENCES FIRST
;ENTER IS PROBABLY THE MOST COMMON OF ALL
SV10.T: VT100X,,"[" ;ESCAPE [ == READ NEXT CHAR
VT100S,,"O" ;ESCAPE O == READ NEXT CHAR
$JUSTI,,"J" ;ESCAPE J == JUSTIFY
$JUSTI,,"j" ;ESCAPE j == JUSTIFY
$TBSET,,"S" ;ESCAPE S == SET-TABS
$TBSET,,"s" ;ESCAPE s == SET-TABS
$MARKR,,"M" ;ESCAPE M == MARKER
$MARKR,,"m" ;ESCAPE m == MARKER
SV10.S==.-SV10.T
VT100X: $CURUP,,"A" ;ESCAPE [ A == UP
$CURDN,,"B" ;ESCAPE [ B == DOWN
$CURRT,,"C" ;ESCAPE [ C == RIGHT
$CURLF,,"D" ;ESCAPE [ D == LEFT
0
VT100S: $ENTER,,"P" ;ESCAPE O P == ENTER
$CURHM,,"R" ;ESCAPE O R == HOME
$RECAL,,"Q" ;ESCAPE O Q == RECALL
$INMOD,,"M" ;ESCAPE O M == INSERT-MODE
$SAVE,,"S" ;ESCAPE O S == SAVE-FILE
$CURUP,,"A" ;ESCAPE O A == UP
$CURDN,,"B" ;ESCAPE O B == DOWN
$CURRT,,"C" ;ESCAPE O C == RIGHT
$CURLF,,"D" ;ESCAPE O D == LEFT
$BLINE,,"t" ;ESCAPE O t == START-OF-LINE
$ELINE,,"v" ;ESCAPE O v == END-OF-LINE
$DNTAB,,"r" ;ESCAPE O r == DOWN-TAB
$UPTAB,,"x" ;ESCAPE O x == UP-TAB
$ERSWD,,"n" ;ESCAPE O n == ERASE-WORD
$RLTAB,,"p" ;ESCAPE O p == REAL-TAB
$MARK,,"w" ;ESCAPE O w == MARK
$CASE,,"y" ;ESCAPE O y == CASE
$REWRT,,"u" ;ESCAPE O u == REWRITE SCREEN
$WINDW,,"q" ;ESCAPE O q == WINDOW
$SLDLF,,"m" ;ESCAPE O m == SLIDE-LEFT
$SLDRT,,"l" ;ESCAPE O l == SLIDE-RIGHT
$HELP,,"s" ;ESCAPE O s == HELP
0
;MOVE TO ROW (RW), COLUMN (CM)
CVT100: MOVSI T1,(BYTE (7) 33,"[")
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,1(RW) ;GET ROW POSITION
PUSHJ P,PUTNUM
MOVEI T1,";" ;THEN A SEMICOLON
IDPB T1,TY
MOVEI T1,1(CM) ;GET COLUMN POSITION
PUSHJ P,PUTNUM
MOVEI T1,"H" ;THEN AN H
IDPB T1,TY
POPJ P, ;DONE
;MOVE TO START OF LINE (T4)
LVT100: MOVSI T1,(BYTE (7) 33,"[")
PUSHJ P,PUTSQ1 ;START IT OFF
MOVEI T1,1(T4) ;GET ROW POSITION
PUSHJ P,PUTNUM
MOVE T1,[ASCII /;0H/]
JRST PUTSQ1 ;MOVE TO FIRST COLUMN; DONE
;ROUTINE CALLED ON VT100 ENTRY: SET UP KEYPAD IN APPLICATION MODE
;(NOTE: EXIT ROUTINE IS WITH VT52 CODE)
EVT100:
IFN ..IDX-1,<JRST DECIDE> ;IF MORE THAN ONE TERMINAL TYPE, FIND WHICH
MOVE T1,[BYTE (7) 33,"=",33,74]
PUSHJ P,PUTSQ1 ;ASSUME VT52, SET VT100 (+ ALTERNATE KEYPAD)
IFN FVT102,<
CAMN T4,[SIXBIT /VT102/] ;REALLY WANT A VT102?
JRST EVT102 ;YES - MODIFY THE TERMINAL TABLE FOR IT
>
IFN FGIGI,<
CAMN T4,[SIXBIT /GIGI/] ;REALLY WANT A GIGI?
JRST EGIGI ;YES - MODIFY THE TERMINAL TABLE FOR IT
>
JRST PUTTYP ;NO - LEAVE IT A VT100
IFN FGIGI,<
EGIGI: SETZM OVT100+ILN ;GIGI - CAN'T INSERT AND DELETE LINES
SETZM OVT100+DLN ; SO SAY IT CAN'T BE DONE
MOVE T1,[3777,,[BYTE (7) 33,"[","3","1",";","4","4","m"]]
MOVEM T1,OVT100+PON ;CHANGE DISPLAY OF PROTECT-ON
JRST PUTTYP ;OUTPUT EVERYTHING AND RETURN
>>
IFN FVT102,<
;TERMINAL TABLES FOR THE VT102
;(USES THE SAME INPUT, OUTPUT TABLES AND POSITIONING ROUTINES AS THE VT100)
FV102F==1 ;FLAG: TURN ON IF TERMINAL SENDS XON-XOFF'S
EVT102:
IFN FVT100!FVT125!FGIGI,<
MOVEI T1,LVT102
MOVEM T1,ILN(TM) ;INSERT LINE ROUTINE
MOVEI T1,DVT102
MOVEM T1,DLN(TM) ;DELETE LINE ROUTINE
>
MOVEI T1,NVT102
MOVEM T1,ISP(TM) ;INSERT SPACE ROUTINE
MOVEI T1,SVT102
MOVEM T1,DSP(TM) ;DELETE SPACE ROUTINE
IFN FTIMD,<
MOVE T1,[BYTE (7) 33,"[","4","h"]
MOVEM T1,IMO(TM) ;SEQUENCE TO TURN INSERT MODE ON
MOVE T1,[BYTE (7) 33,"[","4","l"]
MOVEM T1,IMF(TM) ;AND TO TURN INSERT MODE OFF
>
JRST PUTTYP ;COMPLETE OUTPUT AND RETURN
;SUBROUTINE TO INSERT A LINE AT THE CURSOR
;INSERTS (T4) LINES. ALSO MOVES THE CURSOR DOWN (T4)-1 LINES
IFE FVT100!FVT125!FGIGI,<
ILVT10:
>
LVT102: MOVSI T1,(BYTE (7) 33,"[")
PUSHJ P,PUTSQ1 ;INSERT ALL THE LINES AT ONCE
MOVE T1,T4
PUSHJ P,PUTNUM
SOJLE T4,LVT12A ;DONE IF ONLY ONE LINE
MOVE T1,[BYTE (7) "L",33,"["]
PUSHJ P,PUTSQ1 ;ELSE MOVE THE CURSOR DOWN THAT MANY, TOO
MOVE T1,T4
PUSHJ P,PUTNUM
MOVEI T1,"B"
TDZA T4,T4 ;CLEAR CALLER'S LOOP COUNT
LVT12A: MOVEI T1,"L"
IDPB T1,TY
POPJ P,
;SUBROUTINE TO DELETE (T2) LINES AT THE CURSOR
IFE FVT100!FVT125!FGIGI,<
DLVT10:
>
DVT102: MOVSI T1,(BYTE (7) 33,"[")
PUSHJ P,PUTSQ1
MOVE T1,T2
PUSHJ P,PUTNUM
MOVEI T1,"M"
IDPB T1,TY
SETZ T2, ;CLEAR CALLER'S LOOP COUNT
POPJ P,
;SUBROUTINE TO INSERT (T4) SPACES AT THE CURSOR
NVT102: MOVE T1,[BYTE (7) 33,"[","4","h"]
PUSHJ P,PUTSQ1 ;GET INTO INSERT MODE
MOVEI T1," " ;GET A SPACE
IDPB T1,TY ;OPEN ONE SPACE
SOJG T4,.-1 ;LOOP THROUGH ALL SPACES
MOVE T1,[BYTE (7) 33,"[","4","l"]
JRST PUTSQ1 ;EXIT INSERT MODE AND RETURN
;SUBROUTINE TO DELETE (T4) SPACES AT THE CURSOR
SVT102: MOVSI T1,(BYTE (7) 33,"[")
PUSHJ P,PUTSQ1
MOVE T1,T4
PUSHJ P,PUTNUM
MOVEI T1,"P"
IDPB T1,TY
SETZ T4, ;CLEAR CALLER'S LOOP COUNT
POPJ P,
>
IFN FVI200,<
OVI200: XVI200
>
IFN FVIEWP,<
;DEFINITIONS FOR THE ADDS VIEWPOINT TERMINAL
FVIEWF==0 ;SET THIS IF TERMINAL SENDS OUT XON-XOFF'S
;TERMINAL OUTPUT TABLE - SEQUENCES TO MAKE THE TERMINAL DO SPECIAL THINGS
OVIEWP: BYTE (7) "Z"-100 ;CURSOR UP
BYTE (7) "J"-100 ; DOWN
BYTE (7) "F"-100 ; RIGHT
BYTE (7) "U"-100 ; LEFT
BYTE (7) 33,"Y"," "," " ; HOME
BYTE (7) 33,"k" ;CLEAR TO END OF PAGE
BYTE (7) 33,"K" ;CLEAR TO END OF LINE
BYTE (7) 12 ;ROLL UP AND CLEAR LINE
BYTE (7) 0 ;ROLL DOWN AND CLEAR LINE
BYTE (7) "N"-100 ;PROTECT ON (0 IF NONE)
BYTE (7) "O"-100 ;PROTECT OFF (0 IF NONE)
BYTE (7) 0 ;INSERT LINE (0 IF NONE)
BYTE (7) 0 ;INSERT SPACE (0 IF NONE)
BYTE (7) 0 ;DELETE LINE (0 IF NONE)
BYTE (7) 0 ;DELETE SPACE (0 IF NONE)
BYTE (7) 1 ;MOVE TO BOTTOM
BYTE (7) 1,14 ;HOME AND CLEAR ENTIRE PAGE
CVIEWP ;ROUTINE TO POSITION TO CHARACTER
LVIEWP ;ROUTINE TO POSITION TO START OF LINE
^D24 ;LINES PER PAGE
^D80 ;CHARACTERS PER LINE
IFE FVIEWF,<
SLW!WRP ;TERMINAL-DEPENDENT FLAGS
>
IFN FVIEWF,<
SLW!WRP!NPG ;TERMINAL-DEPENDENT FLAGS (KEEP TTY PAGE)
>
EVIEWP ;ROUTINE TO CALL ON ENTRY
CPOPJ ;ROUTINE TO CALL ON EXIT
0,,0 ;NUMBER OF NULLS TO OUTPUT,,NULL CHARACTER
IVIEWP ;ADDRESS OF INPUT CHARACTER TABLE
IFN FTIMD,<
0 ;ENTER INSERT MODE
0 ;EXIT INSERT MODE
IFN FTLSR,<
CPOPJ ;LIMIT SCROLLING REGION
CPOPJ ;UNLIMIT SCROLLING REGION
>>
;TERMINAL INPUT TABLE - TELLS WHAT CONTROL CHARACTERS OR SEQUENCES
;INVOKE WHICH COMMANDS
IFE FVIEWF,<
EXP $RESET ;RUBOUT
IVIEWP: EXP $RECAL, $CURHM ; 0, A
EXP -SIZ.CB,,SUBCB ;B (NEEDS A SUBTABLE)
EXP $ABORT, $INSLN, $SRCBK, $CURRT ;C, D, E, F
EXP $PUT, $DELCH, $TAB, $CURDN ;G, H, I, J
EXP $TAB, $BKTAB, $RETRN, $SWTCH ;K, L, M, N
EXP $ENTCC, $GOTO, $RLBKP, $SRCFW ;O, P, Q, R
EXP $DELSP, $RLFWL, $CURLF, $PICK ;S, T, U, V
EXP $RLBKL, $EXEC, $RLFWP, $CURUP ;W, X, Y, Z
EXP -SVEW.S,,SVEW.T ;ESCAPE
EXP $MARK, $CURRT, $PUSH, $CURHM ;\, ], ^, _
>
IFN FVIEWF,<
;THIS TABLE SETS UP THE KEYBOARD ARRANGEMENT FOR WHEN YOU NEED TO KEEP
;TTY PAGE IN EFFECT BECAUSE THE TERMINAL SENDS OUT ITS OWN CONTROL S AND Q'S
;THOSE TWO CHARACTERS CANNOT BE COMMANDS SINCE SED DOES NOT KNOW WHETHER THE
;USER HAS TYPED THEM OR THEY WERE SENT BY THE TERMINAL.
;SO Q GOES TO A, A AND S GO TO K AND L, K TO ESCAPE-L, AND L TO ESCAPE-T
;NOTE: this table has not been altered for the Viewpoint.
EXP $RESET ;RUBOUT
IVIEWP: EXP $RECAL, $RLBKP, $SETFI ; 0, A, B
EXP $ABORT, $INSLN, $SRCBK, $DELLN ;C, D, E, F
EXP $PUT, $DELCH, $TAB, $ERSLN ;G, H, I, J
EXP $INSSP, $DELSP, $RETRN, $SWTCH ;K, L, M, N
EXP $ENTCC, $GOTO, 0, $SRCFW ;O, P, Q, R
EXP 0, $RLFWL, $BKTAB, $PICK ;S, T, U, V
EXP $RLBKL, $EXEC, $RLFWP, $EXIT ;W, X, Y, Z
-SVEW.S,,SVEW.T ;ESCAPE
EXP $CURDN, $CURRT, $CURUP, $CURHM ;\, ], ^, _
>
;SUBTABLE FOR CONTROL-B (NORMAL AND SHIFTED F1, F2, F3)
SUBCB: $ENTER,,"1" ;CONTROL-B 1 == ENTER
$DELLN,,"2" ;CONTROL-B 2 == DELETE-LINES
$BLINE,,"3" ;CONTROL-B 1 == BEGIN-LINE
$RECAL,,"!" ;CONTROL-B ! == RECALL
$ERSLN,,"""" ;CONTROL-B " == ERASE-LINE
$ELINE,,"#" ;CONTROL-B 1 == END-LINE
SIZ.CB==.-SUBCB
;SUBTABLE. PUT THE MOST FREQUENTLY-USED SEQUENCES FIRST
;ENTER IS PROBABLY THE MOST COMMON OF ALL
SVEW.T: $SETFI,,"F" ;ESCAPE F == SET-FILE
$SAVE ,,"S" ;ESCAPE S == SAVE-FILE
$EXIT ,,"E" ;ESCAPE E == EXIT
$WINDW,,"W" ;ESCAPE W == WINDOW
$REWRT,,"X" ;ESCAPE X == REWRITE
$CASE ,,"C" ;ESCAPE C == CASE
$HELP ,,"H" ;ESCAPE H == HELP
$INSSP,,"I" ;ESCAPE I == INSERT-SPACES
$INMOD,,"M" ;ESCAPE M == INSERT-MODE
$SLDLF,,"L" ;ESCAPE L == SLIDE-LEFT
$SLDRT,,"R" ;ESCAPE R == SLIDE-RIGHT
$RLFWP,,"P" ;ESCAPE P == ROLL-FORWARD-PAGES
$RLTAB,,"T" ;ESCAPE T == REAL-TAB
$ENTER,,33 ;ESCAPE ESCAPE == ENTER
$SETFI,,"f" ;ESCAPE f == SET-FILE
$SAVE ,,"s" ;ESCAPE s == SAVE-FILE
$EXIT ,,"e" ;ESCAPE e == EXIT
$WINDW,,"w" ;ESCAPE w == WINDOW
$REWRT,,"x" ;ESCAPE x == REWRITE
$CASE ,,"c" ;ESCAPE c == CASE
$HELP ,,"h" ;ESCAPE h == HELP
$INSSP,,"i" ;ESCAPE i == INSERT-SPACES
$INMOD,,"m" ;ESCAPE m == INSERT-MODE
$SLDLF,,"l" ;ESCAPE l == SLIDE-LEFT
$SLDRT,,"r" ;ESCAPE r == SLIDE-RIGHT
$RLFWP,,"p" ;ESCAPE p == ROLL-FORWARD-PAGES
$RLTAB,,"t" ;ESCAPE t == REAL-TAB
IFN FVIEWF,<
;IF TTY PAGE IS IN EFFECT,
;DEFINE SEQUENCES FOR
;<SLIDE-LEFT> AND <SLIDE-RIGHT> HERE
>
SVEW.S=.-SVEW.T
;VIEWPOINT SUBROUTINE TO EXECUTE ON ENTRY
EVIEWP:
IFN ..IDX-1,<JRST DECIDE>
MOVE T1,[BYTE (7) 33,"0","P",0]
PUSHJ P,PUTSQ1
JRST PUTTYP ;OUTPUT IT AND RETURN
;VIEWPOINT SUBROUTINE TO MOVE TO ROW, COLUMN [RW, CM]
CVIEWP: MOVE T1,[BYTE (7) 33,"Y",0]
PUSHJ P,PUTSQ1
MOVEI T1," "(RW)
IDPB T1,TY
MOVEI T1," "(CM)
IDPB T1,TY
POPJ P,
;VIEWPOINT SUBROUTINE TO MOVE TO THE START OF ROW (T4)
LVIEWP: MOVE T1,[BYTE (7) 33,"Y",0]
PUSHJ P,PUTSQ1
MOVEI T1," "(T4)
IDPB T1,TY
MOVEI T1," "
IDPB T1,TY
POPJ P,
>
END
REPEAT 0,<
EXP $RESET ;RUBOUT
0
IVT52: EXP $RECAL, $INSSP, $SETFI ; 0, A, B
40 1 2
EXP $ABORT, $INSLN, $SRCBK, $DELLN ;C, D, E, F
3 4 5 6
EXP $PUT, $DELCH, $TAB, $ERSLN ;G, H, I, J
7 XX 11 XX
EXP $SLDLF, $SLDRT, $RETRN, $SWTCH ;K, L, M, N
13 14 15 16
EXP $ENTCC, $GOTO, $RLBKP, $SRCFW ;O, P, Q, R
17 20 21 22
EXP $DELSP, $RLFWL, $BKTAB, $PICK ;S, T, U, V
23 24 25 26
EXP $RLBKL, $EXEC, $RLFWP, $EXIT ;W, X, Y, Z
27 30 31 32
EXP -SIZ.IS,,I.VT52 ;ESCAPE
33
EXP $PUSH, $CURRT, $SUBST, $SAVE ;\, ], ^, _
EXP $RESET ;RUBOUT
0
IVT52: EXP $RECAL, $RLBKP, $SETFI ; 0, A, B
40 21 2
EXP $ABORT, $INSLN, $SRCBK, $DELLN ;C, D, E, F
3 4 5 6
EXP $PUT, $DELCH, $TAB, $ERSLN ;G, H, I, J
7 XX 11 XX
EXP $INSSP, $DELSP, $RETRN, $SWTCH ;K, L, M, N
1 23 15 16
EXP $ENTCC, $GOTO, 0, $SRCFW ;O, P, Q, R
17 20 22
EXP 0, $RLFWL, $BKTAB, $PICK ;S, T, U, V
24 25 26
EXP $RLBKL, $EXEC, $RLFWP, $EXIT ;W, X, Y, Z
27 30 31 32
-SIZ.IS,,I.VT52 ;ESCAPE
33
EXP $PUSH, $CURRT, $SUBST, $SAVE ;\, ], ^, _
>