Trailing-Edge
-
PDP-10 Archives
-
cuspbinsrc_1of2_bb-x128c-sb
-
10,7/crscpy/crscpy.mac
There are 3 other files named crscpy.mac in the archive. Click here to see a list.
TITLE CRSCPY -- Copy / Log crashes dumped by the monitor
SUBTTL G.M. Uhler/GMU/TARL/DPM/RCB
;This program is based on CRSDMP, a program written by Bill Meier
;at DEC/IPC.
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION
; 1979,1980,1984,1985,1986,1987,1988.
;ALL RIGHTS RESERVED.
;
;
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
;ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
;INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
;COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
;OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
;TRANSFERRED.
;
;THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
;AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
;CORPORATION.
;
;DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
;SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
SEARCH JOBDAT,MACTEN,SCNMAC,UUOSYM
.TEXT |,REL:SCAN/SEARCH,REL:HELPER|
.DIRECTIVE .XTABM,FLBLST
SALL ;Clean up listing
;Show versions of universal files
%%JOBD==%%JOBD
%%MACT==%%MACT
%%SCNM==%%SCNM
%%UUOS==%%UUOS
CCPVER==1 ;DEC version
CCPMIN==2 ;DEC minor version
CCPEDT==61 ;DEC edit number
CCPWHO==0 ;Who last edited
TWOSEG
RELOC 400000
LOC .JBVER
VRSN. (CCP) ;Version number to job data area
RELOC
COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1979,1988. ALL RIGHTS RESERVED.
\;END COPYRIGHT MACRO
SUBTTL Revision history
COMMENT `
[1] 5-Nov-79 If the date/time of the dump is zero, print Unknown
instead of junk.
[2] 6-Nov-79 If the STOPCD name extracted from the dump is not
three alphanumeric characters, use SER. This keeps
the output filename from being junk.
[3] 13-Nov-79 Add the CBEGIN and CEND commands to allow the user to
restrict the report to crashes copied (as opposed to
dumped) between the specified times.
[4] 13-Nov-79 Add a block to each entry containing the disposition
of the crash. Add the DISPOSITION command to allow
a systems programmer to give a disposition for a crash.
[5] 14-Nov-79 Allow the report restriction switches to be placed on
the REPORT command line in addition to being typed as
commands.
[6] 18-Nov-79 Change the syntax of the /STRUCTURE command to allow
the system administrator to specify one or more sets
of structures to be load balanced across. Also allow
the minimum acceptable number of blocks remaining on
a structure to be specified for each structure.
[7] 19-Nov-79 Change the REPORT format to print the uptime
immediately after the crash date/time instead of after
the copy date/time.
[10] 19-Nov-79 Add the /PRIMETIME switch to restrict the report to
those crashes which occured during prime time
(0800-1700).
[11] 19-Nov-79 Add the PURGE FILE command which will delete
SYS:CRASH.SYS but maintain the header so that the
sequence numbers will continue from the current value.
[12] 26-Nov-79 Add the /UNDISPOSED switch to only report on those
crashes which have not been disposed
[13] 17-Dec-79 Fix an off-by-one bug in /UNDISPOSED processing which
caused us to flag some disposed crashes as undisposed.
[14] 28-Dec-79 Read the .EXE directory of the crash being copied and
only copy the number of blocks specified. This saves
disk space when copying crashes dumped onto CRASH.EXE's
which are bigger that the amount of memory actually dumped.
[15] 18-Mar-80 Add the [NO]DELETE command to allow the user to
delete the crash file when it is disposed.
[16] 25-Mar-80 Check for -1 in word 30 of the crash and call the output
file SERnnn if it is.
[17] 25-Mar-80 If the symbol DFTPPN is set to a PPN, don't clear JACCT
if FILDAE is not running and CRSCPY is running under that
PPN. This is for field test sites which do not run FILDAE
so that DEC can update CRASH.SYS.
[20] 15-May-80 Edit 17 wasn't sufficient for the REPORT command. Add
a missing FO.PRV in OPNSYB.
; Revision history continued
[21] 21-May-80 Add the /[NO]HEADER switch/command to enable/disable
the printing of the headers on the REPORT command.
The headers are a lose on a slow terminal. Default is
still /HEADER.
[22] 21-May-80 Change the /SEQUENCE switch to allow a range of sequence
numbers. The new syntax is /SEQUENCE:m:n.
[23] 21-May-80 Change the syntax of the DISPOSITION command to allow
more flexibility in the disposition of crashes. The new
syntax is: DISPOSITION filespec/switches, where filespec
is a filespec that appears in CRASH.SYS and switches are
the switches that can be specified on the REPORT command.
This means that the old syntax of DISPOSITION nn is now
DISPOSITION/SEQUENCE:nn.
[24] 06-Jun-80 Memorize switches read from SWITCH.INI as sticky defaults
for typed commands.
[25] 19-Jan-81 Add the MOVE command to move a crash to another
structure/filespec and update the CRASH.SYS data base.
[26] 16-Jun-81 If any I/O operation fails with status bits returned,
make sure an error message and the bits get typed.
[27] 24-Jul-81 Preserve the state of the .RBEXT (RH), .RBPRV, .RBVER,
and .RBSPL words when a crash is MOVEd.
[30] 20-Mar-82 Add a new bit CR.ACT, Crash is Active. This is used in
conjuction with the CR.DSP (disposed) bit to indicate that
although disposed, the crash still exists and is being worked
on. A crash can now be in any of 3 states: new, active, and
deleted. UNDISPOSED contains new, ACTIVE contains active, and
INACTIVE contains deleted. The CR.ACT bit is cleared by
disposing the crash with the /DELETE switch.
[31] 14-jul-82 Make the MOVE command understand /INACTIVE and /ACTIVE,
and default to /NOINACTIVE instead of /UNDISPOSED so that
we can move ACTIVE crash dumps around.
[32] 4-Feb-83 Empty S/L before logging out so structures in SSL don't
get their mount counts messed up.
[33] 2-May-83 Copy crashes in the order of the system dump list.
[34] 15-may-84 Six character stopcodes.
[35] 25-Oct-84 Wait for FILDAE if started on FRCLIN.
[36] 25-Oct-84 Treat device ALL as generic DSK in ALIASD routine to
allow a CLEAR ALL: command to do the expected thing.
[37] 14-Nov-84 Store ST%RLD and use it to display reloads.
[40] 28-Nov-84 Add /SUMMARY:[ALL!STOPCODES!TOTALS] which will append
to the end of the REPORT listing a summary by stopcode names
and the total numbers of crashes, active, undisposed, and
reload stopcodes.
[41] 28-Dec-84 Defend against holes in the SDL.
[42] 21-Jan-84 Don't include weekends in prime time check.
[43] 23-Jan-84 Eliminate XPN device from CRASH.SYS by copying the FILOP.
returned filespec to the appropriate places.
[44] 5-Feb-85 System startup is still too slow. If the file daemon
isn't running wait the entire .FDTIM seconds before
proceeding.
[45] 6-Feb-85 Only compare Load number of MONVER. Customers use
LH for unrelated things
[46] 15-Aug-85 Do Copyrights.
[47] 3-Oct-85 Teach /STOPCD: to handle wild-carded stopcode name.
Fix a bug at FIXFI2-1 which can clobber P.
[50] 29-May-86 Fix REPORT command to default to DSK: if any part of a filespec
was typed, and to go to TTY:CRASH.LOG[-] only if no filespec
was given.
[51] 29-May-86 Make debugging easier by not getting rid of VMDDT and not
demanding physical-only SYS:CRASH.SYS when loaded with DDT.
[52] 30-Jun-86 Fix to use SUSET. rather than USETO for Super-I/O.
[53] 4-Aug-87 Fix to check MBTCOM as well as RIBSTS when deciding whether
to copy a random crash file.
[54] 12-Aug-87 Fix bug in [53] that lost the confirmation from a CLEAR.
[55] 10-Sep-87 Add facility to assign crash to an owner. Also add /NAME
to selectively list crashes assigned to a particular person.
Unfortunately, names must consist of up to three initialials
to avoid changing the file format.
[56] 10-Sep-87 Add MNAME and MTEXT to make disposition easier. On a
DISPOSE command, an MNAME switch will allow skipping the
"Assign to" prompt, and an MTEXT value will skip the
"Disposition" prompt.
[57] 10-Sep-87 Be more defensive about MBTCOM. Make sure that it agrees
with BOOTPA before believing it.
[60] 17-Mar-88 Don't get so confused by EOF when appending new crashes.
After all, sometimes an entry does just fill a block.
[61] 21-Jun-88 Edit 60 wasn't enough. Be even less paranoid.
` ;End revision history
SUBTTL Symbol definitions
;AC definitions
F==0 ;Flags
T1==1 ;First of four temporaries
T2==2
T3==3
T4==4
P1==5 ;First of four preserved registers
P2==6
P3==7
P4==10
N==P3 ;SCAN convention
C==P4 ;SCAN convention
P==17 ;PDL pointer
;Parameter definitions
ND .PDLEN,50 ;Length of PDL
ND .MXSTR,^D20 ;Max number of STRs which may be specified in
;all sets in the /STRUCTURE command/switch
ND .MXSET,4 ;Max number of sets which may be specified in
;the /STRUCTURE command/switch
ND .SLSTR,2 ;Number of structures in the system search
; from which to create the job search list
; if run by the system on FRCLIN
ND .FDTIM,^D30 ;Number of seconds to wait for a file daemon
; start.
ND .BFBLK,^D150 ;Number of blocks to read at one time while
; copying a crash
ND .PGLEN,^D50 ;Number of report lines to print per page
ND .MXERR,^D15 ;Maximum number of times to retry on ERFBM%
; in FILOPF
ND .SLTIM,5 ;Number of seconds to sleep between tries in
; FILOPF
ND .DSLEN,^D15 ;Number of words containing disposition in
; entry
ND .STPNM,^D500 ;Number of different stopcodes in the monitor
ND BLKSIZ,200 ;Size of a disk block
ND B2WLSH,7 ;Amount to shift a block count to get words
ND W2BLSH,-7 ;Amount to shift a word count to get blocks
ND P2WLSH,^D9 ;Amount to shift pages to get words
ND K2WLSH,^D10 ;Amount to shift K to get words
ND W2PLSH,-P2WLSH ;Amount to shift words to get pages
ND ABSTAB,410 ;Absolute core address of NUMTAB
ND CRSHWD,30 ;Word to check for -1 (system SHUT)
ND MBTCOM,411 ;Place to look to detect system sleep vs. real dump
ND BOOTPA,20 ;Place to find physical address of BOOT
ND EXESIZ,1000 ;Size of crash file EXE directory
ND .RBSLF,177 ;Offset of self pointer in RIB
ND RB.CNT,<0,,^-RB.NSE> ;Count field in RH of .RBCNT
;Continued on the next page
;Continued from the previous page
ND DFTPPN,0 ;Define this symbol to be the PPN into which
;DEC logs in during field test to look at crashes.
;If it is set non-zero and FILDAE is not running,
;CRSCPY will not clear JACCT if it is running under
;that PPN so that DEC can dispose of crashes.
;Set it zero if not under field test or if you
;run FILDAE.
ND .SDLNM,^D36 ;Maximum number of structures in the system dump list
ND DEBUG$,0 ;No debug features
;Channel definitions
ND CRS,1 ;Channel on which crash file is read
ND CPY,2 ;Channel on which output crash file is written
ND SYS,3 ;Channel on which CRASH.SYS is read
ND RPT,4 ;Channel on which to write report
;Flag bits in F
FL.ERR==1B0 ;Fatal error issued
FL.WRN==1B1 ;Warning message issued
FL.TEL==1B2 ;Informative message issued
FL.DSK==1B3 ;Device is generic DSK
FL.RBS==1B4 ;CRSCPY run by system on FRCLIN
FL.NST==1B5 ;Zero if first call to NXTSTR
FL.ODV==1B6 ;Output device is generic disk
FL.OFL==1B7 ;Output filename is wild
FL.XFL==1B8 ;APLDFL saw a wild filename
FL.TTY==1B9 ;Report device is a TTY
FL.ZER==^-FL.RBS ;Flags to clear on each command
SUBTTL Macro definitions
;The following symbols define the error option selected by the third
;argument to the ERROR, WARN, and TELL macros.
;
EO.NUL==0 ;No option given
EO.STP==1 ;Stop program on this error
EO.NCR==2 ;No CRLF at end of this message
EO.MAX==2 ;Max number of error options
;Macro to type a fatal error message. The arguments are:
;
; PRFX - Error prefix, e.g., the XXX in ?CCPXXX ...
; FIRST - The message to be typed
; OPTION - Error option;may be STOP, NOCRLF, or blank
; LABEL - Label to jump to after message is issued
;
DEFINE ERROR (PRFX,FIRST,OPTION,LABEL), <
ERRFLG==EO.NUL
IFIDN <OPTION>,<STOP>, <ERRFLG==EO.STP>
IFIDN <OPTION>,<NOCRLF>, <ERRFLG==EO.NCR>
E..'PRFX: PUSHJ P,.ERR
XLIST
IFNB <LABEL>, <CAIA ERRFLG,[XWD ''PRFX'',[ASCIZ\FIRST\]]
JRST LABEL
>
IFB <LABEL>, <CAI ERRFLG,[XWD ''PRFX'',[ASCIZ\FIRST\]]>
LIST
> ;End DEFINE ERROR
;Macro to type a warning message. The arguments are:
;
; PRFX - Error prefix, e.g., the XXX in %CCPXXX ...
; FIRST - The message to be typed
; OPTION - Error option;may be STOP, NOCRLF, or blank
; LABEL - Label to jump to after message is issued
;
DEFINE WARN (PRFX,FIRST,OPTION,LABEL), <
ERRFLG==EO.NUL
IFIDN <OPTION>,<STOP>, <ERRFLG==EO.STP>
IFIDN <OPTION>,<NOCRLF>, <ERRFLG==EO.NCR>
W..'PRFX: PUSHJ P,.WARN
XLIST
IFNB <LABEL>, <CAIA ERRFLG,[XWD ''PRFX'',[ASCIZ\FIRST\]]
JRST LABEL
>
IFB <LABEL>, <CAI ERRFLG,[XWD ''PRFX'',[ASCIZ\FIRST\]]>
LIST
> ;End DEFINE WARN
;Macro to type an informative message. The arguments are:
;
; PRFX - Error prefix, e.g., the XXX in [CCPXXX ...]
; FIRST - The message to be typed
; OPTION - Error option;may be STOP, NOCRLF, or blank
; LABEL - Label to jump to after message is issued
;
DEFINE TELL (PRFX,FIRST,OPTION,LABEL), <
ERRFLG==EO.NUL
IFIDN <OPTION>,<STOP>, <ERRFLG==EO.STP>
IFIDN <OPTION>,<NOCRLF>, <ERRFLG==EO.NCR>
T..'PRFX: PUSHJ P,.TELL
XLIST
IFNB <LABEL>, <CAIA ERRFLG,[XWD ''PRFX'',[ASCIZ\FIRST\]]
JRST LABEL
>
IFB <LABEL>, <CAI ERRFLG,[XWD ''PRFX'',[ASCIZ\FIRST\]]>
LIST
> ;End DEFINE TELL
;Macro to type debug information on entry to a subroutine. Debugging
;information is typed if one of the following conditions is met:
;
; 1. CRSCPY is assembled with DEBUG$ non-zero to assemble
; the debugging package.
; 2. The location DEBALL is deposited non-zero. This will
; type debugging information for all subroutines.
; 3. If information about a particular routine in desired,
; leave DEBALL zero and change the SKIPE DEBALL before
; each call to .DEBUG to a JFCL.
;
;the arguments are as follows:
;
; $NAME - Name of the routine
; $LIST - List of locations to type on entry
;
;If the switch DEBUG$ is zero, this macro assembles
;nothing.
DEFINE TRACE$ ($NAME,$LIST), <
IFN DEBUG$, < ;;Assemble only if debug is on
SKIPE DEBALL ;;Type only if wanted
XLIST
PUSHJ P,.DEBUG ;;Call debug routine
CAI [SIXBIT/$NAME/ ;;Generate routine name
IFNB <$LIST>, <
IRP $LIST, < ;;For all elements of $LIST
EXP $LIST ;;Plus address
> ;;End IRP $LIST
> ;;End IFNB $LIST
XWD -1,0] ;-1,,0 terminates block
LIST
> ;;End IFN DEBUG$
> ;;End DEFINE TRACE$
;Macro to relocate to the high segment if not already there.
DEFINE $HIGH, <
IFL <.-400000>, <
XLIST
LIT
RELOC
LIST
>
>
;Macro to relocate to the low segment if not already there.
DEFINE $LOW, <
IFGE <.-400000>, <
XLIST
LIT
RELOC
LIST
>
>
;Macro to store a constant in consecutive memory locations (The one in
;MACTEN doesn't work right for FIRST==LAST). Note that this macro has
;the restriction that it must be called only after the locations
;specified by FIRST and LAST are defined. If this restriction is not
;met, MACRO will generate phase errors since it doesn't know how many
;words to generate on pass 1.
;The arguments are:
;
; AC - AC to use
; FIRST - FIRST location into which to store
; LAST - Last location into which to store
; CONS - Constant to store
DEFINE STORE(AC,FIRST,LAST,CONS), <
IFB <LAST>,< LAST%%==FIRST> ;;If no last, assume first
IFNB <LAST>,<LAST%%==LAST> ;;Otherwise use last
IFL <LAST%%-FIRST>,<
PRINTX % Final location .LT. starting location in STORE macro
>
IFE <CONS>,< SETZM FIRST> ;;If CONS=0, clear FIRST
IFE <CONS>+1,<SETOM FIRST> ;;If CONS=-1, set first to -1
IFN <CONS>*<<CONS>+1>, <
MOVX AC,<CONS> ;;Else do it
MOVEM AC,FIRST ;;the hard way
>
XLIST
IFG <LAST%%-FIRST>,< ;;If more than one location
MOVE AC,[FIRST,,FIRST+1]
BLT AC,LAST%% ;;Distribute the constant
>
LIST
>
SUBTTL CRASH.SYS header format
$LOW
HEADER:
PHASE 0
.CHVER==2 ;File format version
.CHEAD:! BLOCK 1 ;Lengths/version
CH.HED==777B8 ;Length of header
CH.FIL==777B17 ;Length of file entry
CH.VER==777B35 ;File version number
.CHFDT:! BLOCK 1 ;Universal date/time of first entry
.CHLDT:! BLOCK 1 ;Universal date/time of last entry
.CHSEQ:! BLOCK 1 ;Sequence number of last crash copied
.CHCNT:! BLOCK 1 ;Number of entries in this file
.CHLEN:! ;Length of header
DEPHASE
SUBTTL CRASH.SYS entry format
;Filespec block offsets used in entry block below
PHASE 0
.CFDEV:! BLOCK 1 ;Device name
.CFFIL:! BLOCK 1 ;Filename
.CFEXT:! BLOCK 1 ;Extension
.CFPTH:! BLOCK .PTMAX-.PTPPN ;Path block (including zero terminator)
.CFLEN:! ;Length of block
DEPHASE
FENTRY:
PHASE 0
.CRCDT:! BLOCK 1 ;Universal date/time of copy
.CRDDT:! BLOCK 1 ;Universal date/time of dump
.CRUPT:! BLOCK 1 ;System uptime in milliseconds at dump
.CRSTC:! BLOCK 1 ;STOPCD which caused dump
.CRVER:! BLOCK 1 ;Monitor version
.CRMNM:! BLOCK 5 ;ASCIZ monitor name
.CRFFL:! BLOCK .CFLEN ;Filespec from where copied
.CRTFL:! BLOCK .CFLEN ;Filespec to which copied
.CRFLG:! BLOCK 1 ;Flags for this entry
CR.DSP==1B0 ;Disposition given for crash
CR.ACT==1B1 ;Crash is still active (not deleted)
CR.DST==3B1 ;Combination of DSP and ACT
CRA.DL==2 ;Combination of DSP and ACT to form DELETED
CRA.AC==3 ;Combination of DSP and ACT to form ACTIVE
CR.RLD==1B2 ;Stopcode resulted in a reload
CR.WHO==777777B35 ;Crash owner in SIXBIT
.CRDSP:! BLOCK .DSLEN ;ASCIZ disposition of crash
.CRLEN:! ;Length of entry
DEPHASE
$HIGH
SUBTTL CRSCPY switch definitions
;Define the valid switches for SCAN
DEFINE SWTCHS,<
XLIST
SN ACTIVE,F.ACTI,FS.NFS ;[NO]ACTIVE
SP BEGIN,F.BGN,.SWDTP##,,FS.NFS!FS.VRQ ;BEGIN:date:time
SP CBEGIN,F.CBGN,.SWDTP##,,FS.NFS!FS.VRQ ;CBEGIN:date:time
SP CEND,F.CEND,.SWDTP##,,FS.NFS!FS.VRQ ;CEND:date:time
SP CLEAR,MSCCMD,$CLEAR,,FS.NFS ;CLEAR filespec
SP COPY,MSCCMD,$COPY,,FS.NFS ;COPY filespec=filespec
SN DELETE,F.DELE,FS.NFS ;[NO]DELETE
SL DETAIL,F.DETL,DTL,DTLALL,FS.NFS ;DETAIL:[ALL,DISPOSITION]
SP DISPOSITION,MSCCMD,$DISP,,FS.NFS ;DISPOSITION filespec
SP END,F.END,.SWDTP##,,FS.NFS!FS.VRQ ;END:date:time
SN INACTIVE,F.INAC,FS.NFS ;[NO]INACTIVE
SL INFORM,S.INF,INF,INFUSER,FS.NFS ;INFORM:[USER,OPR]
SN HEADER,F.HEAD,FS.NFS ;[NO]HEADER
SP MNAME,F.MNAM,.SWSIX##,,FS.NFS!FS.VRQ ;MNAME:new-crash-owner
SP MONVER,F.MNV,.OCTNW##,,FS.NFS!FS.VRQ ;MONVER:n
SP MOVE,MSCCMD,$MOVE,,FS.NFS ;MOVE filespec=filespec
SP MTEXT,<*P,<POINT 65-.DSLEN,F.MTXT>>,.SWASQ##,,FS.NFS!FS.VRQ
;MTEXT:"new-disposition"
SP NAME,F.NAME,.SWSIX##,,FS.NFS!FS.VRQ ;NAME:crash-owner
SN PRIMETIME,F.PRTM,FS.NFS ;[NO]PRIMETIME
SP PURGE,MSCCMD,$PURGE,,FS.NFS ;PURGE FILE
SP REPORT,MSCCMD,$REPORT,,FS.NFS ;REPORT filespec
SP SEQUENCE,F.SEQ,GETSEQ,,FS.NFS!FS.VRQ ;SEQUENCE:number
SP STOPCD,F.STCD,GETSCD,,FS.NFS!FS.VRQ ;STOPCD:xxx
SP STRUCTURE,MSCCMD,$STRUC,,FS.NFS!FS.VRQ ;STRUCTURE:(x,x,x)
SL SUMMARY,F.SUMM,SUM,SUMALL,FS.NFS ;SUMMARY:[ALL,STOPCODES,TOTALS]
SN UNDISPOSED,F.UNDS,FS.NFS ;[NO]UNDISPOSED
LIST
>
KEYS INF,<USER,OPR>
KEYS DTL,<ALL,DISPOSITION>
KEYS SUM,<ALL,STOPCODES,TOTALS>
;Generate the scan tables for SCAN
DOSCAN (CCPSW)
SUBTTL High segment data locations
;.ISCAN block
.ISCBK: IOWD 1,PRGNAM ;IOWD table of legal monitor commands
XWD OFFSET,'CCP' ;Addr of starting offset,,SIXBIT CCL name
XWD 0,W.TTY ;Addr of TTY input rtn,,Output rtn
EXP 0 ;Pointer to indirect file block
XWD PROMPT,MONRET ;Address of prompt rtn,,MONRT rtn
.ISCBL==.-.ISCBK
;.OSCAN block
.OSCBK: IOWD CCPSWL,CCPSWN ;IOWD to legal switch names
XWD CCPSWD,CCPSWM ;Default switch area,,processor table
XWD 0,CCPSWP ;0,,switch pointers for storing
.OSCBL==.-.OSCBK
;.VSCAN block
.VSCBK: IOWD CCPSWL,CCPSWN ;IOWD to legal switch names
XWD CCPSWD,CCPSWM ;Default switch area,,Processor switch table
XWD 0,CCPSWP ;0,,Switch pointers for storing
EXP -1 ;Let HELPER provide the help
XWD FLEN,FBGN ;Len,,address of F.xxx area
XWD 0,SBGN ;0,,address of S.xxx area
.VSCBL==.-.VSCBK
PRGNAM: SIXBIT/CRSCPY/ ;Our name
BUFIOW: IOWD BLKSIZ,BUF ;IOWD to BUF
0
HDRIOW: IOWD .CHLEN,HEADER ;IOWD to HEADER
0
APEIOW: IOWD BLKSIZ*2,BUF ;IOWD to append an entry
0
;The following tables contain the GETTAB arguments that we need plus
;the default values if the GETTAB fails. The order of the tables is
;important and must remain the same as that of GTBVAL in the low seg.
GTBTAB: %LDSYS ;SYS PPN
%LDCRP ;XPN PPN
%CNTIC ;Number of jiffies per second
GTBTBL==.-GTBTAB
GTBDFL: 1,,4 ;Default for SYS
10,,1 ;Default for XPN
^D60 ;Default for number of jiffies per second
SUBTTL Low segment data areas
$LOW
BGNZER:! ;Start of block to zero at initialization
SM.BEG:! ;Start of summary data
WIDTH: BLOCK 1 ;Maximum column count
SUMNUM: BLOCK 1 ;Number of entries in stopcode tables
CRSNUM: BLOCK 1 ;Count of crashes
ACTNUM: BLOCK 1 ;Count of active crashes
UNDNUM: BLOCK 1 ;Count of undisposed crashes
RLDNUM: BLOCK 1 ;Count of reloads
STPNAM: BLOCK .STPNM ;Table of stopcode names
STPCNT: BLOCK .STPNM ;Table of stopcode counts
SM.END:! ;End of summary data
.ISLOW: BLOCK .ISCBL ;Lowseg .ISCAN block
ISCBLK: BLOCK .FXLEN ;Input scan block
OSCBLK: BLOCK .FXLEN ;Output scan block
CSCBLK: BLOCK .FXLEN ;MOVE command copy scan block
CURBLK: BLOCK 1 ;Current block read in GETTAB simulation
NUMTAB: BLOCK 1 ;Address of NUMTAB in crash
FILSIZ: BLOCK 1 ;Size of input file in blocks
CORBLK: BLOCK 1 ;Address of copy buffer
CORNUM: BLOCK 1 ;Number of blocks in copy buffer
LINCNT: BLOCK 1 ;Count of lines left on current page
PAGCNT: BLOCK 1 ;Page number
SEQNUM: BLOCK 1 ;Sequence number of current entry
LBSEQN: BLOCK 1 ;Lower bound from /SEQUENCE
UBSEQN: BLOCK 1 ;Upper bound from /SEQUENCE
UPDFIR: BLOCK 1 ;Word address of first word of CRASH.SYS
; now in BUF
UPDLAS: BLOCK 1 ;Last word now in BUF
MOVBLK: BLOCK 4 ;Block in which to save .RBEXT, .RBPRV,
; .RBVER, and .RBSPL from the LOOKUP
; block on a MOVE command
;Continued on the next page
;Continued from the previous page
FILBLK: ;Start of FILOP./LOOKUP blocks
FLPBLK: BLOCK .FOMAX ;FILOP. block
LKPBLK: BLOCK .RBSTS+1 ;LOOKUP block
PTHBLK: BLOCK .PTMAX ;PATH. block
FSPBLK: BLOCK .FOFMX ;Returned filespec block
DELBLK: BLOCK 4 ;FILOP. delete rename block
FILBLE==.-1 ;End of FILOP./LOOKUP blocks
;Keep the following two blocks together
GSTBLK: BLOCK .DFGNM+1 ;GOBSTR block
STUBLK: BLOCK <.FSDFL*.SLSTR>+.FSFCN+1 ;STRUUO block
;End of order dependence
DSCBLK: BLOCK .DCPSD+1 ;DSKCHR block
MSCCMD: BLOCK 1 ;Location into which to store unused
;values of commands (COPY, CLEAR, etc.)
NEXTST: BLOCK 1 ;Pointer to the next structure in the SDL
SDLBLK: BLOCK .SDLNM+1 ;system dump list (SDL)
BGNSTZ: ;Start of block to zero on entry to $STRUC
SETTAB: BLOCK .MXSET ;Set pointers to STRTAB for /STRUCTURE
STRTAB: BLOCK .MXSTR+.MXSET+1 ;Structure names in each set for /STRUCTURE
BLKTAB: BLOCK .MXSTR+.MXSET+1 ;Blocks remaining for /STRUCTURE
ENDSTZ==.-1 ;End of block to zero on entry to $STRUC
BUF: BLOCK BLKSIZ*2 ;General purpose buffer
ENDZER==.-1 ;End of block to zero at initialization
BGNONE: ;Start of block to set to -1 at initialization
;Continued on the next page
;Continued from the previous page
;The S.xxxx locations contain the sticky values of commands/switches.
;They must be in the same relative order as the F.xxxx locations. Any
;S.xxxx values that do not have corresponding F.xxxx locations must
;apppear after those that do.
SBGN:
S.ACTI: BLOCK 1 ;Value of [NO]ACTIVE
S.BGN: BLOCK 1 ;Value of BEGIN:date:time
S.CBGN: BLOCK 1 ;Value of CBEGIN:date:time
S.CEND: BLOCK 1 ;Value of CEND:date:time
S.DELE: BLOCK 1 ;Value of [NO]DELETE
S.DETL: BLOCK 1 ;Value of DETAIL:[ALL,DISPOSITION]
S.END: BLOCK 1 ;Value of END:date:time
S.HEAD: BLOCK 1 ;Value of [NO]HEADER
S.INAC: BLOCK 1 ;Value of [NO]INACTIVE
S.MNAM: BLOCK 1 ;Value of MNAME:new-crash-owner
S.MNV: BLOCK 1 ;Value of MONVER:n
S.MTXT: BLOCK .DSLEN ;Value of MTEXT:"new-disposition"
S.NAME: BLOCK 1 ;Value of NAME:crash-owner
S.PRTM: BLOCK 1 ;Value of [NO]PRIMETIME
S.SEQ: BLOCK 1 ;Value of SEQUENCE:m:n
S.SUMM: BLOCK 1 ;Value of SUMMARY:[ALL,STOPCODES,TOTALS]
S.UNDS: BLOCK 1 ;Value of [NO]UNDISPOSED
;*** Must be last in step with F.xxx *** (See APLSTK)
S.STCD: BLOCK 1 ;Value of STOPCD:xxx
S.STCM: BLOCK 1 ;Mask of STOPCD:xxx
;*** Must be after /STOPCD stuff, since has no F area ***
S.INF: BLOCK 1 ;Value of INFORM:[USER,OPR]
SEND==.-1
;The F.xxx locations contain the values of commands/switches which are
;local to this command.
FBGN:
F.ACTI: BLOCK 1 ;Value of /[NO]ACTIVE
F.BGN: BLOCK 1 ;Value of /BEGIN:date:time
F.CBGN: BLOCK 1 ;Value of /CBEGIN:date:time
F.CEND: BLOCK 1 ;Value of /CEND:date:time
F.DELE: BLOCK 1 ;Value of /[NO]DELETE
F.DETL: BLOCK 1 ;Value of /DETAIL:[ALL,DISPOSITION]
F.END: BLOCK 1 ;Value of /END:date:time
F.HEAD: BLOCK 1 ;Value of /[NO]HEADER
F.INAC: BLOCK 1 ;Value of /[NO]INACTIVE
F.MNAM: BLOCK 1 ;Value of /MNAME:new-crash-owner
F.MNV: BLOCK 1 ;Value of /MONVER:n
F.MTXT: BLOCK .DSLEN ;Value of /MTEXT:"new-disposition"
F.NAME: BLOCK 1 ;Value of /NAME:crash-owner
F.PRTM: BLOCK 1 ;Value of /[NO]PRIMETIME
F.SEQ: BLOCK 1 ;Value of /SEQUENCE:m:n
F.SUMM: BLOCK 1 ;Value of /SUMMARY:[ALL,STOPCODES,TOTALS]
F.UNDS: BLOCK 1 ;Value of /[NO]UNDISPOSED
;*** Must be last *** (See MEMSTK)
F.STCD: BLOCK 1 ;Value of /STOPCD:xxx
F.STCM: BLOCK 1 ;Mask of /STOPCD:xxx
FEND==.-1
FLEN==FEND-FBGN+1
ENDONE==.-1 ;End of block to set to -1
;Continued on the next page
;Continued from the previous page
GTBVAL: ;The following table is order dependent
;See GTBTAB
SYSPPN: BLOCK 1 ;SYS PPN
XPNPPN: BLOCK 1 ;XPN PPN
TICSEC: BLOCK 1 ;Number of jiffies per second
;End of order dependence
;The following block must remain in
; this order.
DSPCOD: BLOCK 1 ;.TODSP for TRMOP.
OPRLIN: BLOCK 1 ;UDX of central site OPR
ASCPTR: BLOCK 1 ;.+1 for TRMOP.
ASCCHR: BLOCK 1 ;Character to output
;End of order dependence
OFFSET: BLOCK 1 ;Entry point offset
MINCOR: BLOCK 1 ;Initial value of .JBFF
MYJOB: BLOCK 1 ;Number of my job
MYLINE: BLOCK 1 ;My line number
CURDAT: BLOCK 1 ;Current date/time
RPTBUF: BLOCK 3 ;Report output buffer header
SYSBUF: BLOCK 3 ;CRASH.SYS input buffer header
PDL: BLOCK .PDLEN ;Push down list
$HIGH
SUBTTL Initialization
CRSCPY: PORTAL .+2 ;Allow protected execution
PORTAL .+2 ;Ditto for CCL entry
TDZA T1,T1 ;Clear CCL entry flag and skip
MOVEI T1,1 ;Indicate CCL entry
MOVEM T1,OFFSET ;Store for SCAN
RESET ;Clear the world
MOVE P,[IOWD .PDLEN,PDL] ;Setup a PDL
SETZM F ;Clear flags
MOVEI T1,CRSCPY ;Get restart address
MOVEM T1,.JBREN ;Save for reenter
SETOM T1 ;-1 means our line
GETLCH T1 ;Get our line number
HRRZM T1,MYLINE ;Save for later
TXZ T1,.UXTRM ;Clear universal bit
MOVX T2,%CNFLN ;GETTAB to return FRCLIN TTY number
GETTAB T2, ;Get it
SETOM T2 ;Insure no match
CAIE T2,(T1) ;Are we running on FRCLIN?
JRST CRSCP1 ;No
MOVSI T1,.UXTRM(T1) ;Setup UDX,,0 for detach
ATTACH T1, ;Detach from FRCLIN
JFCL ;Shouldn't happen
TXOA F,FL.RBS ;Set run by system flag and don't clear JACCT
CRSCP1: PUSHJ P,CLRJAC ;Conditionally clear JACCT
PUSHJ P,CRSINI ;Initialize program
MOVE T1,[.ISCBK,,.ISLOW] ;Setup to BLT .ISCAN block to
BLT T1,.ISLOW+.ISCBL-1 ; the low segment
TXNE F,FL.RBS ;Run by system?
SETZM .ISLOW ;Yes, disallow RESCANs
MOVE T1,[.ISCBL,,.ISLOW] ;Point to .ISCAN block
PUSHJ P,.ISCAN## ;Initialize SCAN
MOVE T1,[.OSCBL,,.OSCBK] ;Get pointer to .OSCAN block
PUSHJ P,.OSCAN## ;Read options file
PUSHJ P,MEMSTK ;Memorize as sticky defaults
TXNN F,FL.RBS ;Run by system?
JRST CRSCP2 ;No, continue
PUSHJ P,CLRSCB ;Yes, clear scan blocks
PUSHJ P,FDACHK ;WAIT FOR FILE DEAMON IF NECESSARY
PUSHJ P,$COPYD ;Copy using all defaults
PUSHJ P,.MONRT## ; and LOGOUT
JRST .-1 ;On the very unlikely chance we come back
CRSCP2: TXZ F,FL.ZER ;Clear volatile flags
MOVE T1,[.VSCBL,,.VSCBK] ;Point to .VSCAN block
PUSHJ P,.VSCAN## ;Do a command
PUSHJ P,.MONRT## ;Exit if last command
JRST CRSCP2 ;Try again if more commands or CONTINUE
SUBTTL CLEAR command -- Clear unprocessed dump bit
;Routine to process the clear command. Clear the unprocessed dump
;bit in the RIBs of the specified files.
;The call is:
; PUSHJ P,$CLEAR
; <Return here always>
$CLEAR: TRACE$ $CLEAR ;Type debugging info
PUSHJ P,CLRSCB ;Clear input and output scan blocks
JUMPLE C,$CLEA1 ;Go if no filespec seen
PUSHJ P,.FILIN## ;Read filespec
JUMPG C,E.INCL## ;Error if not EOL now
$CLEA1: MOVEI T1,ISCBLK ;Point to where to copy scan block
MOVX T2,.FXLEN ; and length of scan block
PUSHJ P,.GTSPC## ;Copy to our area
MOVE T1,['DSK',,'EXE'] ;Setup defaults for device and extension
MOVE T2,[SIXBIT/CRASH/] ; and filename
MOVE T3,SYSPPN ; and PPN
MOVEI T4,ISCBLK ;Point to scan block
PUSHJ P,APLDFL ;Apply defaults
POPJ P, ;Failed, return
TXZ F,FL.DSK!FL.NST ;Initialize call to NXTSTR
$CLEA2: MOVE T3,ISCBLK+.FXDEV ;Get device from scan block
PUSHJ P,NXTSTR ;Get next structure to process
POPJ P, ;No more, return
MOVEM T3,ISCBLK+.FXDEV ;Save STR name for next call
MOVEI T1,ISCBLK ;Point to scan block
MOVEI T2,FLPBLK+.FOIOS ;Point to OPEN block part of FILOP. block
MOVEI T3,LKPBLK ;Point to LOOKUP block
PUSHJ P,.STOPN## ;Convert scan block to FILOP./LOOKUP blocks
JRST E..SCF ;Failed, give message and return
MOVX T1,FO.PRV!INSVL.(CRS,FO.CHN)!.FORED ;Setup channel,function
PUSHJ P,FILOPD ;Setup FILOP. block, do function
POPJ P, ;Failed
PUSHJ P,CLEAR0 ;Clear bit from this file
JRST E..UMC ;Failed
JRST $CLEA2 ;Loop for next structure
CLEAR0: PUSHJ P,CLRBIT ;Clear the bit
POPJ P, ;Propagate failure
TELL FMC,<File >,NOCRLF
PUSHJ P,TYPISB ;Give filename
MOVEI T1,[ASCIZ/ marked as copied]
/]
PUSHJ P,.TSTRG## ;Finish message and end the line
JRST .POPJ1## ;Success return
ERROR UMC,<Unable to mark file >,NOCRLF
PUSHJ P,TYPISB
MOVEI T1,[ASCIZ/ as copied
/]
PJRST .TSTRG## ;Finish message and end line
SUBTTL COPY command -- Copy crash to XPN
;Routine to process the COPY command. Copy one or more crashes
;specified by the input specs to the files specified by the output
;specs. Enter at $COPYD when run by the system to use all defaults.
;The call is:
; PUSHJ P,$COPY
; <Return here always>
$COPY: TRACE$ $COPY ;Type debugging info
PUSHJ P,.SAVE1## ;Save P1
PUSHJ P,CLRSCB ;Clear input and output scan blocks
JUMPLE C,$COPYD ;Go if no filespec seen
PUSHJ P,.FILIN## ;Read a filespec
CAIE C,"=" ;See an output spec terminated by
CAIN C,"_" ; an equal or underline?
CAIA ;Yes
JRST $COPY1 ;No, continue
MOVEI T1,OSCBLK ;Point to scan block
MOVX T2,.FXLEN ;Get length of scan block
PUSHJ P,.GTSPC## ;Copy scan block to our area
PUSHJ P,.CLRFL## ;Clear filespec area again
PUSHJ P,.FILIN## ;Read input filespec
$COPY1: JUMPG C,E.INCL## ;Must have EOL now
MOVEI T1,ISCBLK ;Point to scan block
MOVX T2,.FXLEN ;Get length of scan block
PUSHJ P,.GTSPC## ;Copy scan block to our area
$COPYD: MOVE T1,['DSK',,'EXE'] ;Setup defaults for device and extension
MOVE T2,[SIXBIT/CRASH/] ;Default input filename is CRASH
MOVE T3,SYSPPN ; from 1,4
MOVEI T4,ISCBLK ;Point at scan block
PUSHJ P,APLDFL ;Apply defaults
POPJ P, ;Failed
MOVE T3,ISCBLK+.FXDEV ;Get input device
PUSHJ P,ALIASD ;Is it generic disk?
JRST $COPY2 ;No
SKIPE OSCBLK+.FXNAM ;Yes, filename specified in output spec?
ERROR OFI,<Output filename illegal with multiple input files>,,.POPJ##
$COPY2: MOVE T1,['DSK',,'EXE'] ;Setup device and extension defaults
MOVEI T2,0 ;Output filename setup later
MOVE T3,XPNPPN ;Default PPN is 10,1
MOVEI T4,OSCBLK ;Point at scan block
PUSHJ P,APLDFL ;Apply defaults
POPJ P, ;Failed
TXZE F,FL.XFL ;Wild filename seen?
TXO F,FL.OFL ;Yes, set flag for output file
MOVE T3,OSCBLK+.FXDEV ;Get output device name
PUSHJ P,ALIASD ;Is it generic disk?
TXZA F,FL.ODV ;No
TXO F,FL.ODV ;Yes, set flag
TXZ F,FL.DSK!FL.NST ;Initialize call to NXTSTR
PUSHJ P,GETCOR ;Get core for copy buffer
POPJ P, ;Failed, return
PUSHJ P,OPNSYS ;Open CRASH.SYS
POPJ P, ;Must have the file
$COPY3: MOVE T3,ISCBLK+.FXDEV ;Get device from scan block
PUSHJ P,NXTSTR ;Get next structure to process
PJRST CLSSYS ;Close CRASH.SYS and return
MOVEM T3,ISCBLK+.FXDEV ;Store for next call
MOVEI T1,ISCBLK ;Point to scan block
MOVEI T2,FLPBLK+.FOIOS ;Point to OPEN part of FILOP. block
MOVEI T3,LKPBLK ;Point to LOOKUP block
PUSHJ P,.STOPN## ;Convert scan block to FILOP./LOOKUP block
JRST E..SCF ;Return after issuing message
MOVX T1,FO.PRV!INSVL.(CRS,FO.CHN)!.FORED ;Setup chn,fnc
PUSHJ P,FILOPD ;Open the file
JRST $COPY3 ;Failed, try next
TXNN F,FL.DSK ;Was input device specified?
JRST $COPY4 ;Yes, don't check whether we want to
MOVX T1,RP.DMP ;Get unprocessed dump bit
TDNN T1,LKPBLK+.RBSTS ;Is it set in this RIB?
JRST $COPY3 ;No, ignore it
PUSHJ P,GTBINI ;Yes, look for page zero
MOVEI T1,MBTCOM ;Communication word for system sleep
PUSHJ P,PEKDSK ;Fetch it from the file
JRST $COPY3 ;Garbage dump
SKIPN NUMTAB ;If GETTAB is valid
JRST $COPY3 ;No, punt it
JUMPE T1,$COPY5 ;Copy if not system sleep
HRRZ T3,T1 ;Preserve the page number
MOVEI T1,BOOTPA ;Word with physical address of BOOT
PUSHJ P,PEKDSK ;Fetch from the file
JRST $COPY3 ;Garbage dump
LSH T1,W2PLSH ;Convert address to page number
CAIE T3,(T1) ;Is this a sleep dump?
JRST $COPY5 ;No--copy it despite MBTCOM
PUSHJ P,CLEAR0 ;Clear the RIBSTS bit
PUSHJ P,E..UMC ;Notify of error
JRST $COPY3 ;Garbage dump
$COPY4: PUSHJ P,GTBINI ;Didn't look for MBTCOM, init the file here
$COPY5: MOVEI T1,ISCBLK ;Point to the input scan block
PUSHJ P,FIXFIL ;Update with actual filespec
PUSHJ P,MOVIFS ;Move input filespec to entry
PUSHJ P,GTBCRS ;Read needed GETTABs from crash
PUSHJ P,CMPSIZ ;Compute and store FILSIZ
PUSHJ P,OPTSTR ;Select output device
JRST CLSSYS ;Give up
PUSHJ P,CLRFLB ;Clear FILOP./LOOKUP blocks
MOVEI T1,OSCBLK ;Point to output scan block
MOVEI T2,FLPBLK+.FOIOS ;Point to OPEN part of FILOP. block
MOVEI T3,LKPBLK ;Point to LOOKUP block
PUSHJ P,.STOPN## ;Convert scan block
ERROR SCF,<Scan block conversion failed>,,CLSSYS
MOVX T1,FO.PRV!INSVL.(CPY,FO.CHN)!.FOWRT ;Setup chn, fnc
PUSHJ P,FILOPD ;Setup FILOP. block, do function
JRST $COPY3 ;Failed, try next
MOVEI T1,OSCBLK ;Point to the output scan block
PUSHJ P,FIXFIL ;Update with actual filespec
PUSHJ P,MOVOFS ;Move output filespec to entry
PUSHJ P,DOCOPY ;Copy the file
JRST $COPY3 ;Failed
PUSHJ P,APNENT ;Append file entry to the file
ERROR EAF,<Entry append to SYS:CRASH.SYS failed>,,$COPY3
TELL CPY,<Copied >,NOCRLF ;Tell him what we did
PUSHJ P,TYPISB ;Type input filename
MOVEI T1,[ASCIZ/ to /]
PUSHJ P,.TSTRG## ;Type separator
PUSHJ P,TYPOSB ;Type output filespec
PUSHJ P,.TRBRK## ;Type right bracket
PUSHJ P,.TCRLF## ; and end line
PUSHJ P,CLRBIT ;Clear unprocessed dump bit
PUSHJ P,E..UMC ;Failed, give message
PUSHJ P,UPDHDR ;Make sure file header is correct
ERROR HUF,<Header update of SYS:CRASH.SYS failed>
JRST $COPY3 ;Try next file
SUBTTL DISPOSITION command -- Give disposition of crash
;Routine to process the DISPOSTION command. Allow the user to give
;a disposition for the crash.
;The call is:
; PUSHJ P,$DISP
; <Return here always>
$DISP: TRACE$ $DISP ;Type debugging info
PUSHJ P,.SAVE2## ;Save P1-P2
PUSHJ P,CLRSCB ;Clear out scan blocks
SKIPG C ;End of line here?
ERROR ARD,<Argument required on DISPOSITION command>,,.POPJ##
PUSHJ P,.FILIN## ;Read the filespec and switches
JUMPG C,E.INCL## ;Must have end of line now
PUSHJ P,APLSTK ;Apply sticky defaults
MOVEI T1,ISCBLK ;Point at scan block in our area
MOVX T2,.FXLEN ;Get length of scan block
PUSHJ P,.GTSPC## ;Ask SCAN to copy it to our area
HRLOI T1,'DSK' ;Device is DSK, extension is wild
SETOM T2 ;Filename is wild
MOVE T3,XPNPPN ;Default PPN is 10,1
MOVEI T4,ISCBLK ;Point to scan block
PUSHJ P,APLDFL ;Apply defaults to filespec
POPJ P, ;Illegal filespec typed
SKIPL F.SEQ ;/SEQUENCE specified?
JRST $DISP1 ;Yes, already verified so continue
SETZM LBSEQN ;Make it look like he typed
MOVX T1,1B1 ; /SEQUENCE:1:large number
MOVEM T1,UBSEQN ; so that the routines have some values
;Continued on the next page
;Continued from the previous page
;Here after validating the command string to actually start disposing
;the specified entries. Note that if /SEQUENCE is not specified we
;have to make a pass througout the entire file to dispose of a crash.
;As a result, it's much more efficient to specify at least a range
;of sequence numbers to put us in the ballpark so that the entire file
;need not be searched.
$DISP1: PUSHJ P,OPNSYS ;No, open SYS:CRASH.SYS
POPJ P, ;Failed
SKIPA P1,LBSEQN ;Get initial value to dispose
$DISP2: AOS P1,LBSEQN ;Increment lower bound
MOVEM P1,SEQNUM ;Save number for printing routines
CAMG P1,UBSEQN ;Done all that he wants?
CAML P1,HEADER+.CHCNT ;Done all of file?
PJRST CLSSYS ;Yes, close file and return
PUSHJ P,FNDENT ;Find corresponding entry
ERROR ENF,<Missing entry >,NOCRLF,$DISP3
MOVEI P2,(T1) ;Save relative block in file of entry
PUSHJ P,CHKDSP ;This entry match the restrictions?
JRST $DISP2 ;No, do next
PUSH P,F.DETL ;Save current value of /DETAIL
MOVX T1,DTLDIS ;Get value for /DETAIL:DISPOSITION
MOVEM T1,F.DETL ;Make it look like that
PUSHJ P,PRTENO ;Print entry and current disposition
POP P,F.DETL ;Restore /DETAIL value
PUSHJ P,REDDSP ;Read disposition
JRST $DISP2 ;Didn't change so don't have to update
SKIPLE T1,F.DELE ;/DELETE specified?
PUSHJ P,DELFIL ;Yes, delete the file
PUSHJ P,UPDENT ;Rewrite entry
ERROR CUE,<Cannot update entry >,NOCRLF,$DISP3
JRST $DISP2 ; and loop
$DISP3: AOS T1,LBSEQN ;Get failing sequence number, make it 1 based
PUSHJ P,.TDECW## ;Type it
MOVEI T1,[ASCIZ/ in SYS:CRASH.SYS
/] ;Tell him which entry that
PUSHJ P,.TSTRG## ; we found the error on
PJRST CLSSYS ;Close file and return
SUBTTL MOVE command -- Move a crash from one filespec to another
;Routine to process the MOVE command. Move the input file to the output
;file and update the CRASH.SYS data base to reflect the move.
;The call is:
; PUSHJ P,$MOVE
; <Return here always>
$MOVE: TRACE$ $MOVE ;Type debugging info
PUSHJ P,.SAVE2## ;Save P1-P2
PUSHJ P,CLRSCB ;Clear input, output and move scan blocks
SKIPG C ;Have an argument?
ERROR ARM,<Argument required on MOVE command>,,.POPJ##
PUSHJ P,.FILIN## ;Read the filespec
CAIE C,"=" ;Have an input spec?
CAIN C,"_" ;...
CAIA ;Yes, proceed
ERROR OSR,<Output filespec required on MOVE command>,,.POPJ##
MOVEI T1,OSCBLK ;Get address of output scan block
MOVX T2,.FXLEN ; and its length
PUSHJ P,.GTSPC## ;Copy it to our area
PUSHJ P,.CLRFL## ;Clear SCANs copy of the scan block
PUSHJ P,.FILIN## ;Read the input filespec
JUMPG C,E.INCL## ;Must have end of line here
MOVEI T1,ISCBLK ;Get address of input scan block
MOVX T2,.FXLEN ; and its length
PUSHJ P,.GTSPC## ;Copy it to our area
SKIPGE S.UNDS ;Was [NO]UNDISPOSED specified?
SKIPL F.UNDS ; How about /[NO]UNDISPOSED?
JRST $MOVE1 ;One or the other
SKIPGE S.ACTI ;Was [NO]ACTIVE specified?
SKIPL F.ACTI ; how about /[NO]ACTIVE?
JRST $MOVE1 ;one or the other
SKIPGE S.INAC ;Was [NO]INACTIVE specified?
SKIPL F.INAC ; how about /[NO]INACTIVE?
JRST $MOVE1 ;one or the other
SETZM F.INAC ;Force a /NOINACTIVE on this command
$MOVE1: PUSHJ P,APLSTK ;Apply sticky defaults
MOVE T1,['DSK',,'EXE'] ;Get default device and extension
SETOM T2 ;Input filename may be wild
MOVE T3,XPNPPN ;Default PPN is 10,1
MOVEI T4,ISCBLK ;Get scan block address
PUSHJ P,APLDFL ;Apply defaults
POPJ P, ;Failded, give non-skip return
MOVE T1,['DSK',,'EXE'] ;Get default device and extension
MOVEI T2,0 ;Filename setup later
MOVE T3,XPNPPN ;Default PPN is 10,1
MOVEI T4,OSCBLK ;Get scan block address
PUSHJ P,APLDFL ;Apply defaults
POPJ P, ;Failed, return
PUSHJ P,GETCOR ;Get core for the copy buffer
POPJ P, ;Failed, can't do much
SKIPL F.SEQ ;/SEQUENCE specified?
JRST $MOVE2 ;Yes, already verified so continue
SETZM LBSEQN ;Make it look like he typed
MOVX T1,1B1 ; /SEQUENCE:1:large number
MOVEM T1,UBSEQN ; so that the routines have some values
$MOVE2: PUSHJ P,OPNSYS ;Open SYS:CRASH.SYS
POPJ P, ;Failed
SKIPA P1,LBSEQN ;Get initial value to process
$MOVE3: AOS P1,LBSEQN ;Increment lower bound
MOVEM P1,SEQNUM ;Save number for printing routines
CAMG P1,UBSEQN ;Done all that he wants?
CAML P1,HEADER+.CHCNT ; Done all of file?
PJRST CLSSYS ;Yes, close file and return
PUSHJ P,FNDENT ;Find corresponding entry
JRST E..ENF ;Failed, type message and return
MOVEI P2,(T1) ;Save relative block in file of entry
PUSHJ P,CHKDSP ;This entry match the restrictions?
JRST $MOVE3 ;No, try the next one
PUSHJ P,SETTFB ;Setup FILOP./LOOKUP blocks from entry
MOVX T1,FO.PRV!INSVL.(CRS,FO.CHN)!.FORED ;Get channel, function
PUSHJ P,FILOPD ;Open the input file
JRST $MOVE3 ;Failed, try the next
PUSHJ P,CMPSIZ ;Compute the size of the file
MOVE T1,[OSCBLK,,CSCBLK] ;Get set to BLT output scan block
BLT T1,CSCBLK+.FXLEN-1 ;Move it to the copy scan block
MOVE T1,FENTRY+.CRTFL+.CFFIL ;Get input filename
SKIPN CSCBLK+.FXNAM ;Did the user specify a different name?
MOVEM T1,CSCBLK+.FXNAM ;No, store the input filename
PUSHJ P,SCLFLB ;Save needed values and clear blocks
MOVEI T1,CSCBLK ;Get address of scan block
MOVEI T2,FLPBLK+.FOIOS ;Get address of OPEN part of FILOP. block
MOVEI T3,LKPBLK ;Get address of LOOKUP block
PUSHJ P,.STOPN## ;Convert scan block to FILOP./LOOKUP blocks
JRST E..SCF ;Shouldn't happen
PUSHJ P,MOVFLB ;Restore values to preserve to LOOKUP block
MOVX T1,FO.PRV!INSVL.(CPY,FO.CHN)!.FOWRT ;Get channel, function
PUSHJ P,FILOPD ;Open the output file
JRST $MOVE3 ;Failed, try the next one
MOVEI T1,CSCBLK ;Point to the crash scan block
PUSHJ P,FIXFIL ;Update with actual filespec
PUSHJ P,DOCOPY ;Copy the input to the output file
JRST $MOVE3 ;Failed, try the next one
SETOM T1 ;No message from DELFIL
PUSHJ P,DELFIL ;Delete the input file
TELL MOV,<Moved >,NOCRLF ;Start of message
PUSHJ P,TYPLEB ;Type input filespec (setup by DELFIL)
MOVEI T1,[ASCIZ/ to /] ;Get the separator
PUSHJ P,.TSTRG## ;Type it
MOVEI T1,CSCBLK ;Get address of copy scan block
PUSHJ P,.TFBLK## ;Type output filespec
PUSHJ P,.TRBRK## ;Type a bracket
PUSHJ P,.TCRLF## ;End the line
PUSHJ P,MOVCFS ;Move new filespec to entry
PUSHJ P,UPDENT ;Update the entry
JRST E..CUE ;Failed
JRST $MOVE3 ;Try next file
SUBTTL PURGE command -- Delete CRASH.SYS but maintain header
;Routine to process the PURGE FILE command. Allow the user to delete
;the data in SYS:CRASH.SYS without deleting the header so that the
;sequence numbers do go back to zero.
;The call is:
; PUSHJ P,$PURGE
; <Return here always>
$PURGE: TRACE$ $PURGE ;Type debugging info
SKIPG C ;Can't have end of line here
ERROR AFR,<Argument "FILE" required on PURGE command>,,.POPJ##
PUSHJ P,.SIXSW## ;Get the argument
CAME N,[SIXBIT/FILE/] ;Require that FILE be typed to avoid
JRST E..AFR ; accidentally deleting the file
JUMPG C,E.INCL## ;Must have end of line now
PUSHJ P,OPNSYS ;Open CRASH.SYS and read the header
POPJ P, ;Failed
SETZM HEADER+.CHFDT ;No first or last dates
SETZM HEADER+.CHLDT ; of crashes yet
SETZM HEADER+.CHCNT ;No entries in file
PUSHJ P,SETSYS ;Setup FILOP./LOOKUP blocks
MOVX T1,FO.PRV!INSVL.(SYS,FO.CHN)!.FOWRT ;Setup function/channel
PUSHJ P,FILOPF ;Do the function
POPJ P, ;Failed
STORE T1,BUF,BUF+BLKSIZ-1,0 ;Clear buffer
PUSHJ P,UPDHDI ;Write initial header
POPJ P, ;Failed
PJRST CLSSYS ;Close file and return
SUBTTL REPORT command -- List entries in CRASH.SYS
;Routine to process the REPORT command. List entries from
;SYS:CRASH.SYS.
;The call is:
; PUSHJ P,$REPORT
; <Return here always>
$REPORT:TRACE$ $REPORT ;Type debugging info
PUSHJ P,.SAVE1## ;Need storage
PUSHJ P,CLRSCB ;Clear scan blocks
JUMPLE C,$REPO1 ;Go if end of line
PUSHJ P,.FILIN## ;Get filespec
JUMPG C,E.INCL## ;Error if not end of line now
SKIPA P1,T1 ;Preserve return from .FILIN
$REPO1: SETZ P1, ;No filespec typed for .FILIN
PUSHJ P,APLSTK ;Apply stick defaults
MOVEI T1,ISCBLK ;Point at where to copy scan block
MOVX T2,.FXLEN ; and length
PUSHJ P,.GTSPC## ;Copy scan block to our area
MOVE T1,['TTY',,'LOG'] ;Setup defaults for device and extension
SKIPGE P1 ;Unless something of a filespec was typed,
HRLI T1,'DSK' ;Then default to DSK:
MOVE T2,[SIXBIT/CRASH/] ;Setup default filename
MOVEI T3,0 ;Default PPN is [-]
MOVEI T4,ISCBLK ;Point to scan block
PUSHJ P,APLDFL ;Apply defaults
POPJ P, ;Failed
MOVE T1,ISCBLK+.FXDEV ;Get device name
DEVCHR T1, ;Get it's characteristics
TXNE T1,DV.TTY ;Is it TTY?
TXO F,FL.TTY ;Yes, set flag for later
MOVEI T1,ISCBLK ;Point to scan block
MOVEI T2,FLPBLK+.FOIOS ;Point to OPEN part of FILOP. block
MOVEI T3,LKPBLK ;Point to LOOKUP block
PUSHJ P,.STOPN## ;Convert scan block to FILOP./LOOKUP blocks
JRST E..SCF ;Give error message and return
MOVX T1,INSVL.(RPT,FO.CHN)!.FOWRT ;Setup channel, function
MOVX T2,.IOASC ;Mode is ASCII
MOVSI T3,RPTBUF ;Setup output buffer header address
PUSHJ P,FILOPB ;Setup block, do function
POPJ P, ;Failed, return
PUSHJ P,OPNSYB ;Open SYS:CRASH.SYS in buffered mode
POPJ P, ;Return
SETZM PAGCNT ;Reset page and
SETZM LINCNT ; line count
MOVEI T1,RPTCHR ;Address of routine to type characters
PUSHJ P,.TYOCH## ;Use this one in report mode
PUSH P,T1 ; and save previous
PUSHJ P,SUMINI ;Initialize summary storage
PUSHJ P,REDHDR ;Read header
JRST $REPO4 ;Failed
SETZM SEQNUM ;Clear sequence number count
$REPO2: PUSHJ P,REDENT ;Get next entry from file
JRST $REPO3 ;Done
PUSHJ P,CHKENT ;Does entry meet restrictions?
CAIA ;No, try next
PUSHJ P,PRTENT ;Yes, print it
AOS SEQNUM ;Count this entry
JRST $REPO2 ; and loop for next
$REPO3: PUSHJ P,SUMMARY ;Print summary
CLOSE RPT, ;Close report file
$REPO4: RELEAS RPT, ; and release input and
RELEAS SYS, ; output channels
POP P,T1 ;Restore original typeout address
PJRST .TYOCH## ; and tell SCAN
SUBTTL STRUCTURE command -- Select output structure
;Routine to process the STRUCTURE command. Store the default output
;structures in STRTAB and the block count in BLKTAB.
;The call is:
; PUSHJ P,$STRUCTURE
; <Never return here>
; <Return here always to prevent scan storing a value>
$STRUC: TRACE$ $STRUC ;Type debugging info
PUSHJ P,.SAVE2## ;Save P1-P2
STORE P1,BGNSTZ,ENDSTZ,0 ;Clear switch blocks
HRLOI P1,-<.MXSET+1> ;Build AOBJP pointer to SETTAB
HRLOI P2,-<.MXSTR+1> ;Build AOBJP pointer to STRTAB
$STRU1: MOVEI T1,2(P2) ;Get next pointer to STRTAB
AOBJN P1,.+2 ;Room in SETTAB?
ERROR TST,<Too many sets specified in STRUCTURE command>,,.POPJ##
MOVEM T1,SETTAB(P1) ;Store pointer to STRTAB
PUSHJ P,.TIALT## ;Get next character
CAIN C," " ;Space?
PUSHJ P,.TIALT## ;Yes, flush it
CAIE C,"<" ;Start of set?
JRST E..SES ;No, syntax error
$STRU2: AOBJN P2,.+2 ;Check for block overflow
ERROR TMS,<Too many structures specified in STRUCTURE command>,,.POPJ##
PUSHJ P,.TIALT## ;Get next character
CAIE C," " ;Space?
PUSHJ P,.REEAT## ;No, put it back
PUSHJ P,.SIXSW## ;Get structure name
SKIPN N ;Name non-null
ERROR NSI,<Null structure illegal in STRUCTURE command>,,.POPJ##
MOVEM N,STRTAB(P2) ;Store name in STRTAB
CAIE C,":" ;Block count specified?
ERROR BCR,<Block count required in STRUCTURE command>,,.POPJ##
PUSHJ P,.DECNW## ;Get block count
MOVEM N,BLKTAB(P2) ;Store in table
CAIN C," " ;Space here?
PUSHJ P,.TIALT## ;Yes, flush it
CAIN C,"," ;Another structure coming?
JRST $STRU2 ;Yes, go get it
CAIE C,">" ;End of set marker?
ERROR SES,<Syntax error in STRUCTURE command>,,.POPJ##
SETZM STRTAB+1(P2) ;Terminate this set
AOBJP P2,E..TMS ;Must have room for zero terminator
PUSHJ P,.TIALT## ;Get next character
CAIN C," " ;Space?
PUSHJ P,.TIALT## ;Yes, flush it
CAIE C,"," ;Another set comming?
JRST .POPJ1## ;No, return
JRST $STRU1 ;Yes, loop
SUBTTL Input/Output default processing
;Routine to apply defaults for device, filename, extension and PPN
;to a scan block.
;The call is:
; MOVE T1,[XWD Device,Extension] ;EXtension=-1 if wild default
; MOVE T2,Filename ;Filename=-1 if wild default
; MOVE T3,PPN
; MOVE T4,Address of scan block
; PUSHJ P,APLDFL
; <Return here if errors with message issued>
; <Return here if scan block defaulted>
APLDFL: TRACE$ APLDFL,<T1,T2,T3,T4> ;Type debugging info
PUSHJ P,.SAVE1## ;Save P1
MOVX P1,FX.NDV ;Get null device bit
TDNN P1,.FXMOD(T4) ;Null device typed?
SKIPN .FXDEV(T4) ; or nothing at all?
CAIA ;Yes, do defaults
JRST APLDF1 ;No, use existing device
HLLZM T1,.FXDEV(T4) ;Store default extension
ANDCAM P1,.FXMOD(T4) ; and clear bit in both flags
ANDCAM P1,.FXMOM(T4) ; and mask words
APLDF1: SETCM P1,.FXNMM(T4) ;Get filename mask
JUMPE P1,APLDF3 ;No defaults if fully specified
AOSN P1 ;Filename is legal if none
SKIPE .FXNAM(T4) ; was specified
CAIA ;If wild filename, continue checking
JRST APLDF2 ;No filename specified, apply default
CAME T2,[-1] ;Wild filenames are legal if default is wild
ERROR WIF,<Wildcard illegal in filename>,,.POPJ##
JRST APLDF3 ;Leave the wild filename as is
APLDF2: MOVEM T2,.FXNAM(T4) ;Store default filename
AOSE T2 ;Was default filename wild?
SETOM T2 ;No, use full mask
MOVEM T2,.FXNMM(T4) ;Store filename mask
TXOA F,FL.XFL ;Set wild filename flag
APLDF3: TXZ F,FL.XFL ; else make sure it's cleared
HRRES T1 ;Extend the sign on the default extension
HRRZ P1,.FXEXT(T4) ;Get extension mask
CAIN P1,777777 ;OK if
JRST APLDF5 ; fully specified
SKIPN .FXEXT(T4) ; Or if no extension typed
JRST APLDF4 ;So go default it
CAME T1,[-1] ; or if default extension is wild
ERROR WIE,<Wildcard illegal in extension>,,.POPJ##
JRST APLDF5 ;Leave the wild extension alone
;Continued on the next page
;Continued from the previous page
APLDF4: HRLOM T1,.FXEXT(T4) ;Store default extension and full mask
AOSN T1 ;was default extension wild?
HLLZS .FXEXT(T4) ;Yes, zero the mask
APLDF5: MOVX T1,FX.DIR ;Get directory specified bit
TDNN T1,.FXMOM(T4) ;Any directory seen at all?
JRST [MOVEM T3,.FXDIR(T4) ;No, store default PPN
SETOM .FXDIM(T4) ; and full mask
SKIPE T3 ;Make it [-] if default was 0
IORM T1,.FXMOD(T4) ;Indicate directory seen
IORM T1,.FXMOM(T4) ; and in mask word
JRST .POPJ1## ;Give skip return
]
TDNN T1,.FXMOD(T4) ;[-] specified?
JRST .POPJ1## ;Yes, no wildcards possible
SETCM T1,.FXDIM(T4) ;Get mask for PPN
JUMPN T1,APLDF7 ;Illegal if wildcards
MOVEI T1,.FXDIR+2(T4) ;Point at first SFD in path
HRLI T1,-<.FXLND-1> ;Make it an AOBJN pointer
APLDF6: SKIPN 0(T1) ;End of path seen?
JRST .POPJ1## ;Yes, give skip return
SETCM T2,1(T1) ;Get mask for this SFD
SKIPE T2 ;Illegal if wildcards
APLDF7: ERROR WID,<Wildcard illegal in directory specification>,,.POPJ##
ADDI T1,1 ;Skip mask word in scan block
AOBJN T1,APLDF6 ; and loop for all
JRST .POPJ1## ;Give skip return
;Routine to return the next structure from the system dump list.
;Call with FL.NST and FL.DSK cleared and the structure in T3 on the first call.
;The call is:
; PUSHJ P,NXTSTR
; <Return here if no more structures>
; <Return here with next structure in T3>
NXTSTR: TRACE$ NXTSTR,<F,T3> ;Type debugging info
TXOE F,FL.NST ;First call?
JRST NXTST2 ;No, don't need to test again
PUSHJ P,ALIASD ;Is STR generic disk?
JRST .POPJ1## ;No, just return name
TXO F,FL.DSK ;Set generic disk flag
MOVE T3,[-<.SDLNM+1>-1,,-1] ;Predecremented AOBJN pointer
MOVEM T3,NEXTST ;Save
SETZ T3, ;Initialize SYSSTR argument
NXTST1: SYSSTR T3, ;Get next structure in the system
POPJ P, ;Should never happen
JUMPE T3,NXTST2 ;We've seen all of them
MOVEM T3,DSCBLK+.DCNAM ;Store in DSKCHR block
MOVE T1,[.DCPSD+1,,DSCBLK] ;Setup for DSKCHR
DSKCHR T1, ;Do it
JRST NXTST1 ;Failed, try next
SKIPL T1,DSCBLK+.DCPSD ;This structure in the SDL?
MOVEM T3,SDLBLK(T1) ;Yes, store it away in it's proper place
JRST NXTST1 ; and go do it again
NXTST2: TXNN F,FL.DSK ;Return if not
POPJ P, ; generic disk
MOVE T1,NEXTST ;Get AOBJN pointer
NXTST3: AOBJP T1,.POPJ## ;Return if end of SDL
MOVEM T1,NEXTST ;Update for next time
SKIPN T3,SDLBLK(T1) ;Get structure name
JRST NXTST3 ;Ignore empty slots
JRST .POPJ1## ;Return
;Routine to select the output device for a crash copy from the
;STRTAB table. The structure selected is the first one found in
;searching the sets which meets the block restrictions and has
;the most space of all structures in the same set. If /STRUCTURE
;was not specified, XPN is returned. Call with FILSIZ containing
;the size of the file to copy in blocks.
;The call is:
; PUSHJ P,OPTSTR
; <Return here if /STR specified and not enough space>
; <Return here with name stored in scan block
OPTSTR: TRACE$ OPTSTR,T1 ;Type debugging info
TXNN F,FL.ODV ;Output device specified?
JRST .POPJ1## ;Yes, use that one
PUSHJ P,.SAVE4## ;Save P1-P4
MOVSI P1,-.MXSET ;Get AOBJN pointer to SETTAB
OPTST1: SKIPN P2,SETTAB(P1) ;Get next pointer to STRTAB
JRST OPTST4 ;Go at end of table
SETZB P3,P4 ;P3=name, P4=size of best match in set
OPTST2: SKIPN T1,STRTAB-1(P2) ;Get next structure from table
JRST OPTST3 ;Done with this set
MOVEM T1,DSCBLK+.DCNAM ;Store name in DSKCHR block
MOVE T1,[.DCFCT+1,,DSCBLK] ;Point to block
DSKCHR T1, ;Ask the monitor how much space is left
AOJA P2,OPTST2 ;Ignore if not known
MOVE T1,DSCBLK+.DCFCT ;Get blocks remaining on this STR
SUB T1,FILSIZ ;Minus amount we want to copy
CAML T1,BLKTAB-1(P2) ;Meet the space restriction?
CAMG T1,P4 ;Yes, have we seen a better match?
AOJA P2,OPTST2 ;Yes, ignore this one
MOVE P4,T1 ;Copy size of best match so far
MOVE P3,STRTAB-1(P2) ; and name of best match
AOJA P2,OPTST2 ;Loop for next structure in set
OPTST3: JUMPN P3,OPTST6 ;Go if found a match in this set
AOBJN P1,OPTST1 ;Advance to next set and try that one
OPTST4: TRNN P1,-1 ;/STRUCTURE specified?
JRST OPTST5 ;No, return XPN
ERROR ISC,<Insufficient space to copy >,NOCRLF
PUSHJ P,TYPISB ;Type offending filespec
PJRST .TCRLF## ;End line and return
OPTST5: MOVSI P3,'XPN' ;Return XPN
OPTST6: MOVEM P3,OSCBLK+.FXDEV ;Store in output scan block
JRST .POPJ1## ;Return
;Routine to memorize sticky defaults. These defaults are copied from
;the area starting at FBGN to the area starting at SBGN if and only if
;the FBGN area switch was specified and the SBGN area switch was not.
;The call is:
; PUSHJ P,MEMSTK
; <Return here always>
MEMSTK: TRACE$ MEMSTK ;Type debugging info
MOVSI T1,-<FLEN-2> ;Build AOBJN pointer to switches
; (Excluding /STOPCD and mask)
MEMST1: SETCM T2,SBGN(T1) ;Get value of next switch
JUMPN T2,MEMST2 ;Don't default if specified
SETCM T2,FBGN(T1) ;Get local default
JUMPE T2,MEMST2 ;Skip if no local default
SETCAM T2,SBGN(T1) ;Default the switch
MEMST2: AOBJN T1,MEMST1 ;Loop for all switches
DMOVE T1,S.STCD ;Get sticky stopcode info
CAMN T1,T2 ;Don't default if specified
CAME T1,[-1] ;Check both ways
POPJ P, ;Return
DMOVE T1,F.STCD ;Get local stopcode info
DMOVEM T1,S.STCD ;Default the switch
POPJ P, ;Return
;Routine to apply sticky defaults. These defaults are stored starting
;at SBGN and transferred to the area starting at FBGN if and only if
;the local switch is not specified and the sticky default was specified.
;The call is:
; PUSHJ P,APLSTK
; <Return here always>
APLSTK: TRACE$ APLSTK ;Type debugging info
MOVSI T1,-<FLEN-2> ;Build AOBJN pointer to switches
; (Excluding /STOPCD and mask)
APLST1: SETCM T2,FBGN(T1) ;Get value of next switch
JUMPN T2,APLST2 ;Don't default if specified
SETCM T2,SBGN(T1) ;Get sticky default
JUMPE T2,APLST2 ;Skip if no sticky default
SETCAM T2,FBGN(T1) ;Default the switch
APLST2: AOBJN T1,APLST1 ;Loop for all switches
MOVE T1,F.SEQ ;Get values for /SEQUENCE
HLREM T1,LBSEQN ;Store lower bound in 1 word
HRREM T1,UBSEQN ; and upper bound in 1 word
DMOVE T1,F.STCD ;Get stopcode info
CAMN T1,T2 ;Don't default if specified
CAME T1,[-1] ;Check both ways
POPJ P, ;Return
DMOVE T1,S.STCD ;Get sticky stopcode info
CAMN T1,T2 ;Don't default if specified
CAME T1,[-1] ;Check both ways
POPJ P, ;Return
DMOVEM T1,F.STCD ;Default the switch
POPJ P, ; and return
;Routine to determine if a device is generic disk or some abbreviation
;thereof, e.g., D:, DS:, DSK:.
;The call is:
; MOVE T3,Device
; PUSHJ P,ALIASD
; <Return here not if generic disk>
; <Return here if generic disk>
ALIASD: TRACE$ ALIASD,T3 ;Type debugging info
CAMN T3,['ALL '] ;All structures?
JRST .POPJ1## ;Yes--call it generic DSK of a sort
PUSHJ P,.MKMSK## ;Make mask of name, return in T1
MOVSI T2,'DSK' ;Get generic disk
AND T2,T1 ;Mask to how much was typed
CAMN T2,T3 ;Match?
AOS 0(P) ;Yes, give skip return
POPJ P, ;Return
SUBTTL CRASH.SYS interface routines
;Routine to open SYS:CRASH.SYS and read in the header. Builds a
;new header if the file doesn't exist.
;The call is:
; PUSHJ P,OPNSYS
; <Return here if something failed>
; <Return here with file open on channel SYS>
OPNSYS: TRACE$ OPNSYS ;Type debugging info
PUSHJ P,SETSYS ;Setup FILOP./LOOKUP blocks
MOVX T1,FO.PRV!INSVL.(SYS,FO.CHN)!.FOSAU ;Get chn, fnc
PUSHJ P,FILOPF ;Setup FILOP. block, do function
POPJ P, ;Failed
INPUT SYS,HDRIOW ;Read header
GETSTS SYS,T1 ;Get status
TRNE T1,IO.ERR ;Any errors?
JRST OPNSY2 ;Yes
TRNE T1,IO.EOF ;Creating new file?
JRST OPNSY1 ;Yes
LDB T1,[POINTR HEADER+.CHEAD,CH.VER] ;Get version of header
CAIE T1,.CHVER ;Same as this one
ERROR VSF,<Version skew for SYS:CRASH.SYS>,,.POPJ##
JRST .POPJ1## ;Yes, just return
OPNSY1: SETSTS SYS,.IODMP ;Clear errors
MOVX T1,INSVL.(.CHLEN,CH.HED)!INSVL.(.CRLEN,CH.FIL)!INSVL.(.CHVER,CH.VER)
;Setup first word of header
MOVEM T1,HEADER+.CHEAD ;Store in block
PUSHJ P,.GTNOW## ;Get current universal date/time
MOVEM T1,HEADER+.CHFDT ;Store as first date/time in file
MOVEM T1,HEADER+.CHLDT ; and last date/time
SETZM HEADER+.CHSEQ ;Zero sequence number
SETZM HEADER+.CHCNT ; and count of entries
STORE T1,BUF,BUF+BLKSIZ-1,0 ;Clear buffer
PJRST UPDHDI ;Write initial header and return
OPNSY2: ERROR IEC,<I/O error on SYS:CRASH.SYS>,NOCRLF
PUSHJ P,TYPSTS ;Type status
JRST CLSSYS ;Close file and return
;Routine to open SYS:CRASH.SYS in buffered mode for the REPORT
;code.
;The call is:
; PUSHJ P,OPNSYB
; <Return here if error>
; <Return here with file open on channel SYS>
OPNSYB: TRACE$ OPNSYB ;Type debugging info
PUSHJ P,SETSYS ;Setup FILOP./LOOKUP blocks
MOVX T1,FO.PRV!INSVL.(SYS,FO.CHN)!.FORED ;Get channel, function
MOVX T2,.IOIMG ;Mode is image
MOVEI T3,SYSBUF ;Point at input buffer header
PJRST FILOPB ;Do function, return
;Routine to close SYS:CRASH.SYS, and release the channel.
;The call is:
; PUSHJ P,CLSSYS
; <Return here always>
CLSSYS: TRACE$ CLSSYS ;Type debugging info
CLOSE SYS, ;Close file
RELEASE SYS, ;Release channel
POPJ P, ; and return
;Routine to setup the FILOP./LOOKUP blocks for SYS:CRASH.EXE.
;The call is:
; PUSHJ P,SETSYS
; <Return here always>
SETSYS: TRACE$ SETSYS ;Type debugging info
PUSHJ P,CLRFLB ;Clear FILOP./LOOKUP blocks
MOVX T1,UU.PHS ;Get physical only bit
SKIPN .JBDDT ;Unless debugging,
MOVEM T1,FLPBLK+.FOIOS ;Store in block
MOVSI T1,'SYS' ;Device name is SYS:
MOVEM T1,FLPBLK+.FODEV ;Store in block
MOVEM T1,LKPBLK+.RBEXT ;Store as extension also
MOVE T1,[SIXBIT/CRASH/] ;Filename is CRASH
MOVEM T1,LKPBLK+.RBNAM ;Store in block
SETOM UPDFIR ;No entries in BUF
SETOM UPDLAS ;...
POPJ P, ;Return
;Routine to update the CRASH.SYS header with the new information
;stored in the in-core copy.
;The call is:
; PUSHJ P,UPDHDR
; <Return here if errors>
; <Return here if successful>
UPDHDR: TRACE$ UPDHDR ;Type debugging info
PUSHJ P,.GTNOW## ;Get universal date/time
MOVEM T1,HEADER+.CHLDT ;Store as last date/time
AOS HEADER+.CHCNT ;Bump the number of entries
MOVEI T1,0 ;Header is in relative block 0
PUSHJ P,REDBUF ;Read that block
POPJ P, ;Failed
UPDHDI: MOVE T1,[HEADER,,BUF] ;Setup to BLT header
BLT T1,BUF+.CHLEN-1 ;Copy header to buffer
MOVEI T1,0 ;Header is in relative block 0
PJRST WRTBUF ;Write block and return
;Routine to append an entry to the end of CRASH.SYS.
;The call is:
; PUSHJ P,APNENT
; <Return here if errors>
; <Return here if successful>
APNENT: TRACE$ APNENT ;Type debugging info
STORE T1,BUF,BUF+<BLKSIZ*2>-1,0 ;Clear buffer
MOVE T1,HEADER+.CHCNT ;Get count of entries now in file
SUBI T1,1 ;Minus one to include the previous one
IMULI T1,.CRLEN ;Times entry length
ADDI T1,.CHLEN ;Plus header length
IDIVI T1,BLKSIZ ;Compute block and offset in block
ADDI T2,.CRLEN ;Point to where our entry will be
CAIG T2,BLKSIZ ;Will our predecessor fit in one block?
SKIPA T3,[BUFIOW] ;Yes, read in one block
MOVEI T3,APEIOW ;No, read up to two blocks
PUSHJ P,REDBLK ;Into BUF
CAIA ;Analyze failure
JRST APNEN1 ;Continue if success
MOVE T1,HEADER+.CHCNT ;No, restore our calculation
SUBI T1,1 ;Since the error message clobbered it
IMULI T1,.CRLEN
ADDI T1,.CHLEN
IDIVI T1,BLKSIZ
ADDI T2,.CRLEN
SKIPN .CRTFL-.CRLEN+.CFPTH+BUF(T2) ;Is the previous entry there?
POPJ P, ;No, fail
GETSTS SYS,T3 ;Yes, get the status
ANDI T3,IO.MOD ;Keep only the mode bits
SETSTS SYS,(T3) ;Clear the errors and blunder onward
APNEN1: MOVEI T3,(T2) ;Copy offset in block to T3
ADD T3,[FENTRY,,BUF] ;Setup BLT pointer to move entry
BLT T3,BUF+.CRLEN-1(T2) ;Move to buffer
MOVEI T3,APEIOW ;Point at IOWD
PJRST WRTBLK ;Write 2 blocks and return
;Routine to find an entry in CRASH.SYS and move it to FENTRY.
;The call is:
; MOVEI P1,Entry sequence number
; PUSHJ P,FNDENT
; <Return here if errors>
; <Return here if successful>
;Returns with P1=Offset in BUF of where entry came from
; T1=Relative block in file of first block
FNDENT: TRACE$ FNDENT,P1 ;Type debugging info
MOVE T1,P1 ;Copy sequence number
IMULI T1,.CRLEN ;Times entry length
ADDI T1,.CHLEN ;Plus header length
MOVEI T2,.CRLEN-1(T1) ;Get last word of entry in T2
CAML T1,UPDFIR ;Is this entry completely in
CAMLE T2,UPDLAS ; core already?
JRST FNDEN1 ;No, have to read it in
SUB T1,UPDFIR ;T1:=Offset in BUF of start of entry
MOVE T2,UPDFIR ;Get word number of first word in BUF
IDIVI T2,BLKSIZ ;Compute block in file of first word
EXCH T1,T2 ;Exchange for code at FNDEN2
JRST FNDEN2 ; and continue
FNDEN1: IDIVI T1,BLKSIZ ;Compute block and offset in block
MOVEI T3,(T1) ;Copy block to t3
IMULI T3,BLKSIZ ;Compute first word in BUF
MOVEM T3,UPDFIR ;Store for next time
MOVEI T3,.CRLEN-1(T2) ;Get offset of final word in entry
CAILE T3,BLKSIZ-1 ;Cross block boundary?
SKIPA T3,[APEIOW] ;Yes, read 2 blocks
SKIPA T3,[BUFIOW] ;No, read 1 block
SKIPA T4,[<BLKSIZ*2>-1] ;Len-1 of buffer for 2 blocks
MOVEI T4,BLKSIZ-1 ;Ditto for 1 block
ADD T4,UPDFIR ;Compute last word in buffer
MOVEM T4,UPDLAS ;Store for next time
PUSHJ P,REDBLK ;Read the block(s)
POPJ P, ;Failed
FNDEN2: MOVEI P1,(T2) ;Return offset in block in P1
ADD T2,[FENTRY,,BUF] ;Make swapped BLT pointer
MOVSS T2 ;Swap halves
BLT T2,FENTRY+.CRLEN-1 ;Move entry to FENTRY
JRST .POPJ1## ;Give skip return
;Routine to update (rewrite) the entry in FENTRY. Call with the
;one or two blocks from which the entry came in BUF.
;The call is:
; MOVEI P1,Offset in BUF of first word of entry
; MOVEI P2,Relative block number in file of first block
; PUSHJ P,UPDENT
; <Return here if errors>
; <Return here if successful>
UPDENT: TRACE$ UPDENT,P1 ;Type debugging info
MOVEI T1,(P1) ;Copy offset in BUF
ADD T1,[FENTRY,,BUF] ;Make BLT pointer
BLT T1,BUF+.CRLEN-1(P1) ;Move it back into the buffer
MOVEI T1,(P2) ;Move block number to T1
MOVEI T3,.CRLEN-1(P1) ;Get last word in this entry
CAILE T3,BLKSIZ-1 ;Does entry cross block boundary?
SKIPA T3,[APEIOW] ;Yes, write 2 blocks
MOVEI T3,BUFIOW ;No, just 1
PJRST WRTBLK ;Rewrite blocks and return
;Routine to read one or more blocks from SYS:CRASH.SYS.
;The call is:
; MOVEI T1,Relative block in file
; MOVEI T3,Address of IOWD
; PUSHJ P,REDBLK
; <Return here if errors>
; <Return here if successful>
;Preserves T2
;Enter at REDBUF to read data into BUF
REDBUF: TRACE$ REDBUF,T1 ;Type debugging info
MOVEI T3,BUFIOW ;Point at IOWD
;; PJRST REDBLK ;Fall into REDBLK
REDBLK: TRACE$ REDBLK,<T1,T3> ;Type debugging info
USETI SYS,1(T1) ;Set to read correct block
STATZ SYS,IO.ERR!IO.EOF ;Errors?
JRST REDBL1 ;Yes
INPUT SYS,(T3) ;Read the data
STATZ SYS,IO.ERR!IO.EOF ;Errors?
REDBL1: ERROR ERC,<Error reading SYS:CRASH.SYS>,NOCRLF,SYSSTS
JRST .POPJ1## ;Give skip return
;Routine to write one or more blocks to SYS:CRASH.SYS.
;The call is:
; MOVEI T1,Relative block in file
; MOVEI T3,Address of IOWD
; PUSHJ P,WRTBLK
; <Return here if errors>
; <Return here if successful>
;Preserves T2
;Enter at WRTBUF to write data from BUF
WRTBUF: TRACE$ WRTBUF,T1 ;Type debugging info
MOVEI T3,BUFIOW ;Point at IOWD
;; PJRST WRTBLK ;Fall into WRTBLK
WRTBLK: TRACE$ WRTBLK,<T1,T3> ;Type debugging info
USETO SYS,1(T1) ;Set to write correct block
STATZ SYS,IO.ERR!IO.EOF ;Errors?
JRST WRTBL1 ;Yes
OUTPUT SYS,(T3) ;Write the data
STATZ SYS,IO.ERR!IO.EOF ;Errors?
WRTBL1: ERROR EWC,<Error writing SYS:CRASH.SYS>,NOCRLF,SYSSTS
JRST .POPJ1## ;Give skip return
SUBTTL Report generation routines
;Routine to check the CRASH.SYS entry in FENTRY to see if it matches
;the restrictions imposed by the DISPOSITION command.
;The call is:
; PUSHJ P,CHKDSP
; <Return here if it doesn't>
; <Return here is it does>
CHKDSP: TRACE$ CHKDSP ;Type debugging info
MOVE T3,ISCBLK+.FXDEV ;Get device specified
PUSHJ P,ALIASD ;Was it generic disk?
SKIPA T3,ISCBLK+.FXDEV ;No, restore name
JRST CHKDS1 ;Yes, that matches everything
CAME T3,[SIXBIT/ALL/] ;So do ALL:
CAMN T3,[SIXBIT/XPN/] ; and XPN:
JRST CHKDS1 ;So continue
CAME T3,FENTRY+.CRTFL+.CFDEV ;Exact match with copied device?
POPJ P, ;No, don't do this one
CHKDS1: MOVE T1,FENTRY+.CRTFL+.CFFIL ;Get filename of copied crash
XOR T1,ISCBLK+.FXNAM ;Match with the one he typed
AND T1,ISCBLK+.FXNMM ; and allow wildcarding
JUMPN T1,.POPJ## ;Go if no match
HLLZ T1,FENTRY+.CRTFL+.CFEXT ;Get extension of copied crash
XOR T1,ISCBLK+.FXEXT ;Match with the one he typed
HRLZ T2,ISCBLK+.FXEXT ;Get extension mask
AND T1,T2 ;Allow wildcards
JUMPN T1,.POPJ## ;Go if no match
MOVX T1,FX.DIR ;Get directory specified bit
TDNN T1,ISCBLK+.FXMOD ;[-] not allowed because it's hard
POPJ P, ;So don't match this one
MOVE T1,ISCBLK+.FXDIR ;Get PPN from scan block
TLNN T1,-1 ;[,pn] specified?
HLL T1,.MYPPN## ;Yes, default it
TRNN T1,-1 ;[p,] specified?
HRR T1,.MYPPN## ;Yes, default it
CAME T1,FENTRY+.CRTFL+.CFPTH ;Match with copied crash?
POPJ P, ;No, no match
MOVSI T1,-<.FXLND-1> ;Get AOBJN pointer to path in scan block
MOVEI T2,0 ;And to path in entry
CHKDS2: MOVE T3,ISCBLK+.FXDIR+2(T1) ;Get next word from scan block
CAME T3,FENTRY+.CRTFL+.CFPTH+1(T2) ;Match entry?
POPJ P, ;No, no match
ADDI T1,1 ;Skip mask word in scan block
ADDI T2,1 ;Step to next word in entry
SKIPE T3 ;Terminate on a zero word?
AOBJN T1,CHKDS2 ;No, step to next entry and loop
;; PJRST CHKENT ;Check the switches also and return
;Routine to check the CRASH.SYS entry in FENTRY to see if it should
;be printed given the report selection command restrictions.
;The call is:
; PUSHJ P,CHKENT
; <Return here if it shouldn't>
; <Return here if it should>
CHKENT: TRACE$ CHKENT ;Type debugging info
MOVE T1,FENTRY+.CRDDT ;Get date/time of dump
SETCM T2,F.BGN ;Get /BEGIN value
JUMPE T2,CHKEN1 ;Go if not specified
CAMGE T1,F.BGN ;Entry later than /BEGIN?
POPJ P, ;No, return
CHKEN1: SETCM T2,F.END ;Get /END value
JUMPE T2,CHKEN2 ;Go if not specified
CAMLE T1,F.END ;Entry earlier than /END?
POPJ P, ;No, return
CHKEN2: SKIPG F.PRTM ;/PRIMETIME specified?
JRST CHKEN3 ;No
HRRZ T3,T1 ;Save time
HLRZS T1 ;Isolate date
IDIVI T1,7 ;Figure out the day
CAIL T2,3 ;Saturday??
CAILE T2,4 ;Or Sunday??
SKIPA ;No--a weekday
POPJ P, ;Ignore weekends
CAIL T3,252525 ;Earlier than 0800?
CAILE T3,552526 ; or later than 1700?
POPJ P, ;Yes, ignore it
CHKEN3: MOVE T1,FENTRY+.CRCDT ;Get date/time of copy
SETCM T2,F.CBGN ;Get /CBEGIN value
JUMPE T2,CHKEN4 ;Go if not specified
CAMGE T1,F.CBGN ;Entry later than /CBEGIN?
POPJ P, ;No, return
CHKEN4: SETCM T2,F.CEND ;Get /CEND value
JUMPE T2,CHKEN5 ;Go if not specified
CAMLE T1,F.CEND ;Entry earlier than /CEND?
POPJ P, ;No, return
CHKEN5: SETCM T1,F.MNV ;Get value of /MONVER
JUMPE T1,CHKEN6 ;Go if not specified
XOR T1,FENTRY+.CRVER ;Mask with value from entry
HRROS T1 ;[45] Ignore LH
AOJN T1,.POPJ## ;Go if no match
CHKEN6: MOVE T1,F.STCD ;Get value of /STOPCD
CAMN T1,[-1] ;Check value
JRST CHKEN7 ;Go if not specified
XOR T1,FENTRY+.CRSTC ;Mask with value from entry
TDNE T1,F.STCM ;Any extra bits lit?
POPJ P, ;Yes, this one won't do
CHKEN7: SETCM T1,F.SEQ ;Get value of /SEQUENCE
JUMPE T1,CHKEN8 ;Give skip return if not specified
MOVE T1,SEQNUM ;Get current sequence number
CAML T1,LBSEQN ;Lower than lower bound?
CAMLE T1,UBSEQN ; or greater than upper bound?
POPJ P, ;Yes, that won't do
CHKEN8: SKIPGE F.UNDS ;Check to see if we care about /UNDISPOSED
JRST CHKEN9 ;Go if not specified
LDB T1,[POINTR FENTRY+.CRFLG,CR.DSP] ;Get disposed bit in entry
XOR T1,F.UNDS ;Match with /UNDISPOSED switch
JUMPE T1,.POPJ## ;If senses don't match, return saying no.
CHKEN9: SKIPGE T2,F.ACTI ;Check to see if we care about /ACTIVE
JRST CHKE10 ;proceed if not specified
LDB T1,[POINTR FENTRY+.CRFLG,CR.DSP!CR.ACT] ;Get bits for active
CAIN T1,CRA.AC ;Check for active (disposed but not deleted)
JUMPN T2,CHKE10 ;entry is active and user wants active, proceed
CAIE T1,CRA.AC ;check for not active this time
JUMPE T2,CHKE10 ;Not active and user wants not active crashes
POPJ P, ;User wants something this crash isn't
CHKE10: SKIPGE T2,F.INAC ;Check to see if we care about /INACTIVE
JRST CHKE11 ;proceed if not specified
LDB T1,[POINTR FENTRY+.CRFLG,CR.DST] ;get bits for active
CAIN T1,CRA.DL ;Inactive is defined as deleted
JUMPN T2,CHKE11 ;Crash is Inactive, and user wants inactive
CAIE T1,CRA.DL ;Check for Not Inactive (still exists)
JUMPE T2,CHKE11 ;Crash isn't deleted and user wants that.
POPJ P, ;Crash doesn't match
CHKE11: HRLZ T1,FENTRY+.CRFLG ;Get crash owner
MOVE T2,F.NAME ;And requested name
CAME T1,T2 ;Match?
CAMN T2,[EXP -1] ;Or none specified?
JRST CHKE12 ;Press on
CAMN T2,['NOBODY'] ;Wat unassigned crashes?
JUMPE T1,CHKE12 ;Let that match
POPJ P, ;Crash doesn't match
CHKE12: JRST .POPJ1## ;Return with this crash as good.
;Routine to print the CRASH.SYS entry from FENTRY in a readable
;format.
;The call is:
; PUSHJ P,PRTENT
; <Return here always>
;Enter at PRTENO to ignore the header
PRTENT: TRACE$ PRTENT ;Type debugging info
SOSGE LINCNT ;Room for more lines on this page?
PUSHJ P,PRTHDR ;No, eject page and print header
PRTENO: MOVE T2,SEQNUM ;Get sequence number
ADDI T2,1 ;Make it 1 based instead of 0 based
PUSHJ P,PRT3DG ;Print as three decimal digits
PUSHJ P,SUMCRS ;Count the crash and type
MOVE T2,FENTRY+.CRFLG ;Get flags for this entry
MOVEI T1," " ;Default to a space (no flag, deleted crashes)
TXNE T2,CR.ACT ;Test for crash being active
MOVEI T1,"A" ;Crash is active, flag with an A
TXNN T2,CR.DSP ;Has crash even been disposed?
MOVEI T1,"U" ;nope, override with a U
PUSHJ P,.TCHAR## ;Print flag
MOVEI T1," " ;Default to a space (no reload)
TXNE T2,CR.RLD ;Stopcode caused a reload?
MOVEI T1,"R" ;Yes
PUSHJ P,.TCHAR## ;Print flag
PUSHJ P,.TSPAC## ;SPACE OVER ONE
MOVE T2,[POINT 7,FENTRY+.CRMNM] ;Point to monitor name
MOVEI T3,^D25 ;Do full 25 characters
PRTEN1: ILDB T1,T2 ;Get next character
JUMPE T1,PRTEN2 ;Go when hit null
PUSHJ P,.TCHAR## ;Type it
SOJG T3,PRTEN1 ;Loop for all
PRTEN2: PUSHJ P,.TSPAC## ;Pad to the right with spaces
SOJG T3,PRTEN2 ; to the full width
HRRZ T1,FENTRY+.CRVER ;Get version number
PUSHJ P,.TOCTW## ;Type in octal
PUSHJ P,.TSPAC## ;Type a space
MOVE T2,[POINT 6,FENTRY+.CRSTC] ;Point at STOPCD name
MOVEI T3,6 ;Do full 6 characters
PRTEN3: ILDB T1,T2 ;Get next character of STOPCD
ADDI T1," "-' ' ;Convert to ASCII
PUSHJ P,.TCHAR## ;Type it
SOJG T3,PRTEN3 ;Loop for all
PUSHJ P,.TSPAC## ;Type a space
;Continued on the next page
;Continued from the previous page
SKIPE T1,FENTRY+.CRDDT ;Get date/time of dump
JRST PRTEN4 ;Go if reasonable
MOVEI T1,[ASCIZ/ Unknown /] ;Illegal, give message
PUSHJ P,.TSTRG## ;Type it
CAIA ;Skip date/time type
PRTEN4: PUSHJ P,.TDTTM## ;Type it
PUSHJ P,.TSPAC## ;Add a space
SKIPL T1,F.DETL ;/DETAIL specified?
CAXE T1,DTLALL ;Yes, was it /DETAIL:ALL?
JRST PRTEN5 ;No, skip this
MOVE T1,FENTRY+.CRUPT ;Get uptime
PUSHJ P,.TTIME## ;Print it
PUSHJ P,.TSPAC## ;Add a space
MOVE T1,FENTRY+.CRCDT ;Get copy date/time
PUSHJ P,.TDTTM## ;Type it
PUSHJ P,.TSPAC## ;Add a space
MOVEI T1,FENTRY+.CRFFL ;Point at filespec of source file
PUSHJ P,PRTFIL ;Print it
MOVEI T1,[ASCIZ/ /];5 spaces for formatting
PUSHJ P,.TSTRG## ;Print it
PRTEN5: MOVEI T1,FENTRY+.CRTFL ;Point at filespec of destination file
PUSHJ P,PRTFIL ;Print it
PUSHJ P,.TCRLF## ;End the line
MOVX T1,CR.DSP ;Get disposition bit
SKIPLE F.DETL ;/DETAIL specified?
TDNN T1,FENTRY+.CRFLG ;Yes, does this one have a disposition?
POPJ P, ;No, return
SOS LINCNT ;Decrement line count remaining on page
MOVEI T1,[ASCIZ/ /] ;Move the disposition over
PUSHJ P,.TSTRG## ; 6 spaces for formatting
HRRZ T1,FENTRY+.CRFLG ;GET OWNER NAME
JUMPE T1,PRTEN6 ;NO OWNER ASSIGNED
LSH T1,14 ;Position
TDO T1,['[ ] '] ;Enclose in brackets
PUSHJ P,.TSIXS## ;Print owner
PRTEN6: MOVEI T1,FENTRY+.CRDSP ;Point to disposition string
PUSHJ P,.TSTRG## ;Put it out
PJRST .TCRLF## ;End the line
;Routine to print a header for the REPORT command.
;The call is:
; PUSHJ P,PRTHDR
; <Return here always>
PRTHDR: TRACE$ PRTHDR ;Type debugging info
TXNE F,FL.TTY ;Output going to TTY?
JRST PRTHD2 ;Yes, skip page headers
MOVEI T1,[BYTE (7).CHCRT,.CHFFD] ;Setup to generate
PUSHJ P,.TSTRG## ; a page feed
SKIPN F.HEAD ;/NOHEADER specified?
JRST PRTHD1 ;Yes, skip the rest
MOVEI T1,[ASCIZ/Report by CRSCPY V/] ;Get start of title
PUSHJ P,.TSTRG## ;Put it out
MOVE T1,.JBVER ;Get our version number
PUSHJ P,.TVERW## ;Type it
MOVEI T1,[ASCIZ/ /] ;Space
PUSHJ P,.TSTRG## ; over
MOVE T1,CURDAT ;Get current date/time
PUSHJ P,.TDTTM## ;Print it
MOVEI T1,[ASCIZ/ Page /]
PUSHJ P,.TSTRG## ;Print start of page number
AOS T1,PAGCNT ;Increment and get page count
PUSHJ P,.TDECW## ;Print it
MOVEI T1,[ASCIZ/
/]
PUSHJ P,.TSTRG## ;Put out 2 CRLFs
PRTHD1: SKIPA T1,[.PGLEN] ;Get length of page and skip
PRTHD2: MOVX T1,1B1 ;If TTY, don't print any more headers
MOVEM T1,LINCNT ;Store lines left on page
SKIPN F.HEAD ;/NOHEADER specified?
POPJ P, ;Yes, done
MOVEI T1,[ASCIZ\
Seq Monitor name Ver Why Crash date/time \]
PUSHJ P,.TSTRG## ;Print start of header
SKIPL T1,F.DETL ;/DETAIL specified?
CAXE T1,DTLALL ;Yes, was it /DETAIL:ALL?
JRST PRTHD3 ;No
MOVEI T1,[ASCIZ\ Uptime Copy date/time Copied from \]
PUSHJ P,.TSTRG## ;Print rest if /DETAIL
PRTHD3: MOVEI T1,[ASCIZ/ Copied to
--- ------------------------ ----- ------ ------------------ /]
PUSHJ P,.TSTRG## ;Finish first line, start second
SKIPL T1,F.DETL ;/DETAIL specified?
CAXE T1,DTLALL ;Yes, was it /DETAIL:ALL?
JRST PRTHD4 ;No
MOVEI T1,[ASCIZ/-------- ------------------ ------------------- /]
PUSHJ P,.TSTRG## ;Type underlining for optional part
PRTHD4: MOVEI T1,[ASCIZ/-----------------
/]
PJRST .TSTRG## ;Finish line and return
;Routine to print a filespec from the FENTRY block.
;The call is:
; MOVEI T1,address of start of filespec
; PUSHJ P,PRTFIL
; <Return here always>
PRTFIL: TRACE$ PRTFIL,T1 ;Type debugging info
MOVE T4,T1 ;Make a safe copy of the pointer
MOVE T1,.CFDEV(T4) ;Get device
PUSHJ P,.TSIXN## ;Type in SIXBIT
PUSHJ P,.TCOLN## ;Add a colon
MOVE T1,.CFFIL(T4) ;Get filename
PUSHJ P,.TSIXN## ;Type it
;[TN] MOVEI T1,"." ;Get dot
;[TN] PUSHJ P,.TCHAR## ;Type it
;[TN] HLLZ T1,.CFEXT(T4) ;Get extension
;[TN] PUSHJ P,.TSIXN## ;Type it
MOVEI T1,.CFPTH(T4) ;Point at start of path
TLO T1,TS.DRP ;Tell SCAN it's a path block
PJRST .TDIRB## ;Let SCAN type it
;Routine to print a decimal number left padded to size three with
;spaces.
;The call is:
; MOVEI T2,number
; PUSHJ P,PRT3DG
; <Return here always>
PRT3DG: TRACE$ PRT3DG,T2 ;Type debugging info
CAIGE T2,^D100 ;Less than 3 digits?
PUSHJ P,.TSPAC## ;Yes, pad with space
CAIGE T2,^D10 ;Less than 2 digits?
PUSHJ P,.TSPAC## ;Yes, pad with space
MOVE T1,T2 ;Move number to T1
PJRST .TDECW## ;Print it and return
;Routine to read the header from SYS:CRASH.SYS in buffered mode.
;The call is:
; PUSHJ P,REDHDR
; <Return here if error>
; <Return here if successful>
REDHDR: TRACE$ REDHDR ;Type debugging info
MOVSI T2,-.CHLEN ;Get AOBJN pointer to header
REDHD1: PUSHJ P,REDWRD ;Read word from file
MOVEM T1,HEADER(T2) ;Store in header
AOBJN T2,REDHD1 ;Loop for all
LDB T1,[POINTR HEADER+.CHEAD,CH.VER] ;Get version number
CAIE T1,.CHVER ;Same as this one?
JRST E..VSF ;No, give message and return
JRST .POPJ1## ;Give skip return
;Routine to read one entry from SYS:CRASH.SYS in buffered mode.
;The call is:
; PUSHJ P,REDENT
; <Return here if no more>
; <Return here if successful>
REDENT: TRACE$ REDENT ;Type debugging info
SOSGE HEADER+.CHCNT ;Any more to do?
POPJ P, ;No, return non-skip
MOVSI T2,-.CRLEN ;Get AOBJN pointer to entry
REDEN1: PUSHJ P,REDWRD ;Get a word
MOVEM T1,FENTRY(T2) ;Store in entry
AOBJN T2,REDEN1 ;Loop for all
JRST .POPJ1## ;Return
;Routine to read one word from SYS:CRASH.SYS in buffered mode.
;The call is:
; PUSHJ P,REDWRD
; <Return here always with word in T1>
REDWRD: TRACE$ REDWRD ;Type debugging info
SOSG SYSBUF+.BFCTR ;More in buffer?
INPUT SYS, ;No, fill it up
ILDB T1,SYSBUF+.BFPTR ;Get next word
POPJ P, ;Return
;Routine to store one character into the report output buffer.
;The call is:
; MOVEI T1,character
; PUSHJ P,RPTCHR
; <Return here always>
RPTCHR: SOSG RPTBUF+.BFCTR ;Room in the buffer?
OUTPUT RPT, ;No, flush it
IDPB T1,RPTBUF+.BFPTR ;Store in buffer
POPJ P, ;Return
;Routine to read the number or numbers for the /SEQUENCE switch.
;The call is:
; PUSHJ P,GETSEQ
; <Return here with lower,,upper bound in N>
GETSEQ: TRACE$ GETSEQ ;Print debugging info
PUSHJ P,.DECNW## ;Get lower bound sequence number
SKIPLE N ;Lower bound illegal?
TLNE N,-1 ; or too big?
CAIA ;Yes
JRST GETSE1 ;No, continue
WARN ILB,<Illegal lower bound for /SEQUENCE; 1 assumed>
MOVEI N,1 ;Do what we told him
GETSE1: PUSH P,N ;Save it
CAIN C,":" ;Was an upper bound specified?
PUSHJ P,.DECNW## ;Yes, get the upper bound
TLNN N,-1 ;Upper bound too big?
CAMGE N,0(P) ;Insure greater or equal than lower bound
CAIA ;Error, give message and default
JRST GETSE2 ;It is, continue
WARN IUB,<Illegal upper bound for /SEQUENCE; Value of lower bound assumed>
MOVE N,0(P) ;Get value of lower bound
GETSE2: SUBI N,1 ;Make value of upper bound 0 based
SOS 0(P) ;Ditto for lower bound
HRL N,0(P) ;Put lower bound in LH
POP P,0(P) ;Flush stack
POPJ P, ;Return and let SCAN store upper bound
;Routine to read the stopcode name for the /STOPCD switch.
;The call is:
; PUSHJ P,GETSCD
; <Return here with specified name in N, mask in F.STCM>
GETSCD: TRACE$ GETSCD ;Print debugging info
PUSHJ P,.NAMEW## ;Get name and mask
PUSHJ P,.LEFTX## ;In case junk names given in octal
MOVEM T1,F.STCM ;Save mask since SCAN doesn't
POPJ P, ;Return and let SCAN store name
SUBTTL Utility routines
;Routine to clear the unprocessed dump bit in the RIBSTS word of a
;file. Call with the file open on channel CRS.
;The call is:
; PUSHJ P,CLRBIT
; <Return here if failed>
; <Return here if successful>
CLRBIT: TRACE$ CLRBIT ;Type debugging info
USETI CRS,0 ;Set to read RIB of file
STATZ CRS,IO.ERR!IO.EOF ;Errors?
JRST CLRBI1 ;Yes, tell of error
INPUT CRS,BUFIOW ;Read the RIB
STATZ CRS,IO.ERR!IO.EOF ;Errors?
JRST CLRBI1 ;Yes
MOVEI T1,CRS ;Get channel file is open on
MOVEM T1,DSCBLK+.DCNAM ;Store for DSKCHR
MOVE T1,[.DCUPN+1,,DSCBLK] ;Get DSKCHR arg pointer
DSKCHR T1, ;Need physical pack name
POPJ P, ;Failed
RELEAS CRS, ;Release the channel
MOVX T1,UU.PHS!.IODMP ;Physical device in dump mode
MOVE T2,DSCBLK+.DCUPN ;Get physical device name
MOVEI T3,0 ;No buffers
OPEN CRS,T1 ;OPEN the channel
POPJ P, ;Failed
MOVX T1,RP.DMP ;Get unprocessed dump bit
ANDCAM T1,BUF+.RBSTS ;Clear in status word
MOVE T1,BUF+.RBSLF ;Fetch block number
TXO T1,<<CRS>B12!SU.SOT> ;Set for Super-output
SUSET. T1, ;Super-USETO
JRST CLRBI1 ;Error, make sure to clear super I/O mode
OUTPUT CRS,BUFIOW ;Rewrite the RIB
STATZ CRS,IO.ERR!IO.EOF ;Errors?
JRST CLRBI1 ;Yes, give error message
RELEAS CRS, ;Insure super I/O mode is cleared
JRST .POPJ1## ;Give skip return
;Here if an error was detected in an I/O operation to give the message
;and the status
CLRBI1: GETSTS CRS,T1 ;Get status bits
RELEAS CRS, ;Insure super I/O mode is cleared
ERROR ERR,<Error rewriting RIB of crash file>,NOCRLF
PJRST TYPSTS ;Type the status
;Routine to read the DISPOSITION command response string and store it
;in FENTRY+.CRDSP.
;The call is:
; PUSHJ P,REDDSP
; <Return here if disposition was not changed>
; <Return here if disposition was changed>
REDDSP: TRACE$ REDDSP ;Type debugging info
PUSHJ P,.SAVE3## ;Save P1-P3
;Assign crash owner
MOVE P1,F.MNAM ;Get new owner from switch value
CAME P1,[-1] ;Was it specified?
JRST REDDS2 ;Yes--just use it
MOVEI T1,[ASCIZ/Assign to: /]
PUSHJ P,.TSTRG## ;Prompt for assignment
SETZ P1, ;Init destination
MOVE P3,[POINT 6,P1] ;Byte pointer for storage
REDDS1: PUSHJ P,.TICHT## ;Get a character
JUMPLE C,REDDS2 ;Done?
CAIN C," " ;Space?
JUMPN P1,REDDS1 ;Ignore leading space
PUSHJ P,.TIMUC## ;Convert case if necessary
CAIL C,"0" ;Digits?
CAILE C,"9" ;...
CAIL C,"A" ;Upper
CAILE C,"Z" ; case?
JRST E.ILSC## ;Junk character
TRNE P1,77 ;Overflow?
JRST REDDS1 ;Ignore character
SUBI C," " ;Convert ASCII to SIXBIT
IDPB C,P3 ;Store character
JRST REDDS1 ;Loop back for more
REDDS2: PUSH P,P1 ;Save temporarily
;Read disposition text
MOVEI P1,<.DSLEN*5>-1 ;Get max characters in string
MOVE P2,[POINT 7,FENTRY+.CRDSP] ;Get byte pointer to string
MOVE P3,P2 ;Copy to suppress trailing spaces
MOVE T4,[PUSHJ P,.TICHT##] ;Instruction to read a character
MOVEI T1,[ASCIZ/Disposition: /]
SETO T3, ;Value for comparison
CAME T3,F.MTXT ;Did we get a value by switch?
SKIPA T4,[ILDB C,T3] ;Yes, just use that
PUSHJ P,.TSTRG## ;No--Ask for disposition for this crash
MOVE T3,[POINT 7,F.MTXT] ;Pointer for reading from core
REDDS3: XCT T4 ;Get next character
JUMPLE C,REDDS5 ;Go if end of line
CAIE C," " ;Space?
JRST REDDS4 ;No, no special checking
CAMN P2,[POINT 7,FENTRY+.CRDSP] ;Seen any characters yet?
JRST REDDS3 ;No, suppress leading spaces
REDDS4: SOSL P1 ;Too many in string?
IDPB C,P2 ;No, store it
CAIE C," " ;Space?
MOVE P3,P2 ;Copy pointer for trailing space suppression
JRST REDDS3 ;Loop for next
REDDS5: MOVEI T1,0 ;Get a null to make string ASCIZ
CAME P2,[POINT 7,FENTRY+.CRDSP] ;See any characters at all?
IDPB T1,P3 ;Store, chopping off trailing spaces
;See if entry has changed
POP P,T1 ;Get name back
MOVE T2,FENTRY+.CRFLG ;Preserve old name
CAMN T1,['NOBODY'] ;Want to remove an assignment?
TDZA T1,T1 ;Clear name
SKIPE T1 ;Name change?
HLRM T1,FENTRY+.CRFLG ;Save results
LDB T1,[POINTR T2,CR.DST] ;Save disposition type
CAME T2,FENTRY+.CRFLG ;Did it change?
JRST REDDS6 ;Yes--give changed return
SKIPE F.MTXT ;Explicitly give a null text?
CAME P2,[POINT 7,FENTRY+.CRDSP] ;See any characters at all?
JRST REDDS6 ;Give 'changed' return
CAIE T1,CRA.DL ;If already deleted,
SKIPG F.DELE ;Or not about to be,
POPJ P, ;Give unchanged return
REDDS6: MOVX T2,CR.DSP!CR.ACT ;Get flag indicating disposition
CAIE T1,CRA.DL ;Don't change status if deleted
IORM T2,FENTRY+.CRFLG ;Store in flags word
SKIPN F.MTXT ;Explicit null text?
SETZM FENTRY+.CRDSP ;Yes--do it
CAIN T1,CRA.DL ;If deleted,
JRST .POPJ1## ;Just give changed return now
MOVX T1,CR.DST ;Otherwise, get set to undispose it
HRLZ T2,FENTRY+.CRFLG ;Get owner
IOR T2,FENTRY+.CRDSP ;Merge in text
SKIPN T2 ;If just deassigned it,
ANDCAM T1,FENTRY+.CRFLG ;Make it undisposed again
JRST .POPJ1## ;Return indicating entry changed
;Routine to delete the file specified by the .CFTFL block in
;FENTRY. Gives error message on error, informative message on
;successful delete (if T1 non-negative).
;The call is:
; MOVE T1,[negative for no message, non-negative for message]
; PUSHJ P,DELFIL
; <Return here always>
DELFIL: TRACE$ DELFIL,T1 ;Type debugging info
PUSH P,T1 ;Save the message flag
PUSHJ P,SETTFB ;Setup FILOP./LOOKUP blocks
MOVX T1,FO.PRV!INSVL.(CRS,FO.CHN)!.FODLT ;Get channel,function
PUSHJ P,FILOPD ;Delete the file
JRST [JUMPE T1,DELFI1 ;If reason delete failed was FNF, mark deleted
JRST DELFI2] ;Error deleting crash, message given by FILOPE
SKIPGE 0(P) ;Caller want the message?
JRST DELFI1 ;No, don't print it then
TELL DLT,<Deleted >,NOCRLF
PUSHJ P,TYPLEB ;Type the filename
PUSHJ P,.TRBRK## ;Type right bracket
PUSHJ P,.TCRLF## ;End the line
DELFI1: MOVX T1,CR.ACT ;Active bit
ANDCAM T1,FENTRY+.CRFLG ;Crash stops being active when it is deleted
DELFI2: RELEAS CRS, ;Release the channel
JRST TPOPJ ;Bring stack into phase and return
;Routine to setup the FILOP./LOOKUP blocks from the "to" filespec
;stored in the current entry.
;The call is:
; PUSHJ P,SETTFB
; <Return here always>
SETTFB: TRACE$ SETTFB ;Type debugging info
PUSHJ P,CLRFLB ;Clear FILOP./LOOKUP blocks
SETZM FLPBLK+.FOIOS ;Clear mode word in FILOP. block
MOVE T1,FENTRY+.CRTFL+.CFDEV ;Get device name
MOVEM T1,FLPBLK+.FODEV ;Store in FILOP. block
MOVE T1,FENTRY+.CRTFL+.CFFIL ;Get filename
MOVEM T1,LKPBLK+.RBNAM ;Store in LOOKUP block
MOVSI T1,DELBLK ;Get address of delete block
MOVEM T1,FLPBLK+.FOLEB ;Store as address of RENAME block
MOVE T1,FENTRY+.CRTFL+.CFEXT ;Get extension
MOVEM T1,LKPBLK+.RBEXT ;Store in LOOKUP block
MOVE T1,[FENTRY+.CRTFL+.CFPTH,,PTHBLK+.PTPPN] ;Setup to BLT path
BLT T1,PTHBLK+.PTMAX-1 ;Move entire block
MOVEI T1,PTHBLK ;Get address of PATH. block
MOVEM T1,LKPBLK+.RBPPN ;Store in LOOKUP block
POPJ P, ;Return
;Routine to read the .EXE directory from the crash about to be copied
;and compute the actual size of the crash which was dumped. Stores
;the size of the file in blocks in FILSIZ.
;The call is:
; PUSHJ P,CMPSIZ
; <Return here always>
CMPSIZ: TRACE$ CMPSIZ ;Type debugging info
USETI CRS,1 ;Set to read the .EXE directory
MOVE T1,CORBLK ;Get address of buffer
SUBI T1,1 ;Offset for IOWD
HRLI T1,-EXESIZ ;Make it an IOWD for the .EXE directory
MOVEI T2,0 ;Terminate it properly
INPUT CRS,T1 ;Read the directory
STATZ CRS,IO.ERR!IO.EOF ;Any errors?
JRST CMPSI1 ;Yes, use .RBSIZ
HLRZ T2,1(T1) ;Get entry code from first word
CAIE T2,.SVDIR ;Is this an .EXE directory?
JRST CMPSI1 ;No
HRRZ T2,1(T1) ;Get size of directory
ADDI T1,-1(T2) ;Point to last of directory chunks
LDB T2,[POINTR .SVFPF(T1),SV%FPN] ;Get file page number
LDB T3,[POINTR .SVPPC(T1),SV%REP] ; plus repeat count
ADDI T2,1(T3) ;Include directory for page size of file
LSH T2,P2WLSH ;Convert to words
CAMGE T2,LKPBLK+.RBSIZ ;Larger than actual file size?
MOVEM T2,LKPBLK+.RBSIZ ;No, store useful size of file
CMPSI1: MOVE T2,LKPBLK+.RBSIZ ;Get size (actual or useful) back
ADDI T2,BLKSIZ-1 ;Round up to a block
LSH T2,W2BLSH ;Convert to blocks
MOVEM T2,FILSIZ ;Store for DOCOPY
POPJ P, ;Return
;Routine to copy one file to another. Call with FILSIZ containing
;the size of the input file in blocks.
;The call is:
; PUSHJ P,DOCOPY
; <Return here if failed with message issued>
; <Return here if succeeded>
DOCOPY: TRACE$ DOCOPY,FILSIZ ;Type debugging info
USETI CRS,1 ;Set to read first block
MOVE T1,CORBLK ;Get address of buffer
SUBI T1,1 ; minus 1 for IOWD
MOVEI T2,0 ;Terminate IOWD with a zero
MOVE T3,FILSIZ ;Get size of file
DOCOP1: JUMPLE T3,DOCOP4 ;Done at end
CAMLE T3,CORNUM ;Want to do more blocks than we have?
SKIPA T4,CORNUM ;Yes, use max
MOVE T4,T3 ;No, do just that many
LSH T4,B2WLSH ;Convert to words
MOVNS T4 ;Make it negative
HRL T1,T4 ;Move to IOWD
IN CRS,T1 ;Read some blocks
JRST DOCOP2 ;Continue if no errors
ERROR IEF,<Input error on >,NOCRLF
PUSHJ P,TYPISB ;Type filename
GETSTS CRS,T1 ;Get file status
PJRST TYPSTS ;Type status and return
DOCOP2: OUT CPY,T1 ;Output the blocks
JRST DOCOP3 ;Continue if no errors
ERROR OEF,<Output error on >,NOCRLF
PUSHJ P,TYPOSB ;Type filename
GETSTS CPY,T1 ;Get file status
PJRST TYPSTS ;Type status and return
DOCOP3: SUB T3,CORNUM ;Decrement block count
JRST DOCOP1 ; and loop
DOCOP4: CLOSE CPY, ;Close output
RELEAS CPY, ; file
JRST .POPJ1## ; and give skip return
;Routine to allocate core for the crash copy buffer.
;The call is:
; PUSHJ P,GETCOR
; <Return here if couldn't get core>
; <Return here if allocated>
;Sets CORBLK to the first address in the buffer,
; CORNUM to the number of blocks we got
GETCOR: TRACE$ GETCOR,<.JBFF,.JBREL> ;Type debugging info
SKIPE CORBLK ;Already have a buffer
JRST .POPJ1## ;Yes, return
PUSH P,.JBFF ;Save current value of .JBFF
MOVEI T1,.BFBLK ;Get number of blocks we need
MOVEM T1,CORNUM ;Assume we can get enough core
LSH T1,B2WLSH ;Convert to words
ADDB T1,.JBFF ;Move .JBFF beyond buffer
CAMG T1,.JBREL ;Have that much already?
JRST GETCO1 ;Yes
CORE T1, ;Try to get it
CAIA ;Failed, try to get less
JRST GETCO1 ;Exit
LSH T1,K2WLSH ;Convert available amount to words
HRRZ T2,.JBHRL ;Get highest address used in the highseg
SUBI T1,-<400000-1>(T2) ;Subtract amount used by highseg
MOVEM T1,.JBFF ;Adjust .JBFF
SOS T2,T1 ;Back up one and copy to T2
SUB T2,0(P) ;Compute number of words available
LSH T2,W2BLSH ;Convert to blocks
MOVEM T2,CORNUM ;Store as number available
CAIL T2,.BFBLK/^D10 ;Need at least 10% of what we wanted
CORE T1, ;Ask for it
JRST GETCO2 ;Give error and return
GETCO1: POP P,CORBLK ;Point to first address in buffer
JRST .POPJ1## ;and return
GETCO2: POP P,.JBFF ;Restore .JBFF
ERROR ICB,<Insufficient core for copy buffer>
POPJ P, ;Return
;Routine to setup a FILOP. block, do the UUO and sleep if the error
;returned in ERFBM%.
;The call is:
; MOVE T1,Channel,,function
; PUSHJ P,FILOPF
; <Return here if with message issued>
; <Return here if function completed>
FILOPF: TRACE$ FILOPF,T1 ;Type debugging info
PUSHJ P,.SAVE1## ;Save P1
MOVNI P1,2 ;Initialize error retry count
FILPF1: MOVX T2,.IODMP ;Mode is dump
MOVEI T3,0 ;No buffers
PUSHJ P,FILOP ;Do function
CAIA ;Failed, check error
JRST .POPJ1## ;Give skip return
AOSN P1 ;Doing second retry?
TELL WCI,<Waiting for CRASH.SYS interlock> ;Yes, tell him
CAIG P1,.MXERR-2 ;Too many tries?
CAIE T1,ERFBM% ;No, was it FBM?
JRST FILOPE ;No, give message and return
MOVEI T1,.SLTIM ;Get time to sleep
SLEEP T1, ;Go away for awhile
HLLZS LKPBLK+.RBEXT ;Clear error code from LOOKUP block
MOVE T1,FLPBLK+.FOFNC ;Get function back
JRST FILPF1 ;Try again
;Routine to setup a FILOP. block and do the UUO.
;The call is:
; MOVE T1,Channel,,Function
; MOVEI T2,Data mode
; MOVE T3,Output buffer,,Input buffer addresses
; PUSHJ P,FILOPB
; <Return here if error with message issued>
; <Return here if function completed successfully>
;Enter at FILOPD to set mode to .IODMP and buffer addresses to 0.
FILOPD: TRACE$ FILOPD,T1 ;Type debugging info
MOVX T2,.IODMP ;Mode is dump
MOVEI T3,0 ;No buffers
;; PJRST FILOPB ;Fall into FILOPB
FILOPB: TRACE$ FILOPB,<T1,T2,T3> ;Type debugging info
PUSHJ P,FILOP ;Do function
JRST FILOPE ;Failed, give error message
JRST .POPJ1## ;Give skip return
;Routine to print an error message when a FILOP. failue occurs.
;The call is:
; MOVEI T1,error code
; PUSHJ P,FILOPE
; <Return here always>
FILOPE: TRACE$ FILOPE,T1 ;Type debugging info
PUSH P,T1 ;save error code for caller
ERROR FLF,<FILOP. error >,NOCRLF
PUSHJ P,.TOCTW## ;Type error code
MOVEI T1,[ASCIZ/ for /] ;Get separator
PUSHJ P,.TSTRG## ;Type it
PUSHJ P,TYPLEB ;Type filespec
PUSHJ P,.TCRLF## ;End the line and return
JRST TPOPJ ;Return, putting error code in t1
;Routine to setup a FILOP. block and do the UUO.
;The call is:
; MOVE T1,Channel,,Function
; MOVEI T2,Data mode
; MOVE T3,Output buffer,,Input buffer addresses
; PUSHJ P,FILOP
; <Return here if error with code in T1>
; <Return here if successful>
FILOP: TRACE$ FILOP,<T1,T2,T3> ;Type debugging info
MOVEM T1,FLPBLK+.FOFNC ;Store channel,,Function
DPB T2,[POINTR FLPBLK+.FOIOS,IO.MOD] ;Store mode
MOVEM T3,FLPBLK+.FOBRH ;Store addresses of buffers
MOVEI T2,0 ;Assume no buffers
TLNE T3,-1 ;Output buffer address specified?
HRLI T2,-1 ;Yes, use default number
TRNE T3,-1 ;Input buffer address specified?
HRRI T2,-1 ;Yes, use default number
MOVEM T2,FLPBLK+.FONBF ;Store number of buffers
MOVEI T1,LKPBLK ;Point to LOOKUP block
HRRM T1,FLPBLK+.FOLEB ;Store in FILOP. block
MOVE T1,[.FOFMX,,FSPBLK] ;Point to the returned filespec block
MOVEM T1,FLPBLK+.FOFSP ;Store in FILOP. block
MOVEI T1,.RBSTS ;Get length of LOOKUP block
DPB T1,[POINTR LKPBLK+.RBCNT,RB.CNT] ;Store
MOVE T1,[.FOMAX,,FLPBLK] ;Get pointer to FILOP. block
FILOP. T1, ;Perform the function
POPJ P, ;Failed, return code in T1
JRST .POPJ1## ;Give skip return
;Routine to type the filespec that caused an operation to fail.
;The call is:
; PUSHJ P,TYPLEB
; <Return here always>
TYPLEB: TRACE$ TYPLEB ;Type debugging info
MOVEI T1,FLPBLK+.FOIOS ;Point at OPEN part of FILOP. block
MOVEI T2,LKPBLK ;Point at LOOKUP block
PJRST .TOLEB## ;Type filespec
;Routines to type the input and output scan blocks. TYPISB types
;ISCBLK, TYPOSB types ISCBLK.
;The call is:
; PUSHJ P,TYP?SB
; <Return here always>
TYPOSB: SKIPA T1,[OSCBLK] ;Point at output scan block
TYPISB: MOVEI T1,ISCBLK ;Ditto for input scan block
PJRST .TFBLK## ;Let SCAN do the typing
;Routine to initialize the input and output scan blocks.
;The call is:
; PUSHJ P,CLRSCB
; <Return here always>
CLRSCB: TRACE$ CLRSCB ;Type debugging info
STORE T1,FBGN,FEND,-1 ;Clear local switch values
PUSHJ P,.CLRFL## ;Clear SCAN's internal area
MOVEI T1,CSCBLK ;Point to copy scan block
MOVX T2,.FXLEN ;Get length
PUSHJ P,.GTSPC## ;Copy virgin block to our area
MOVEI T1,ISCBLK ;Point to input scan block
MOVX T2,.FXLEN ;Get length
PUSHJ P,.GTSPC## ;Copy virgin block to our area
MOVEI T1,OSCBLK ;Point at output scan block
MOVX T2,.FXLEN ;Get length
PJRST .GTSPC## ;Initialize output block and return
;Routine to save the values from the LOOKUP block for the MOVE
;command that are to be preserved for the ENTER. Also clears
;the FILOP. and LOOKUP blocks.
;The call is:
; PUSHJ P,SCLFLB
; <Return here always>
SCLFLB: TRACE$ SCLFLB ;Type debugging info
DMOVE T1,LKPBLK+.RBEXT ;Get .RBEXT, .RBPRV
DMOVEM T1,MOVBLK+0 ;Save them away
DMOVE T1,LKPBLK+.RBVER ;Get .RBVER, .RBSPL
DMOVEM T1,MOVBLK+2 ;Save them also
;; PJRST CLRFLB ;Fall into CLRFLB
;Routine to clear the FILOP. and LOOKUP blocks.
;The call is:
; PUSHJ P,CLRFLB
; <Return here always>
CLRFLB: TRACE$ CLRBLB ;Type debugging info
STORE T1,FILBLK,FILBLE,0 ;Clear the blocks
POPJ P, ;Return
;Routine to restore the preserved values from the LOOKUP block for
;the MOVE command. .RBEXT, .RBPRV, .RBVER, and .RBSPL were stored
;in MOVBLK (in that order) by SCLFLB. We restore them, but pay
;attention to the /PROTECTION switch that the user may have typed.
;The call is:
; PUSHJ P,MOVFLB
; <Return here always>
MOVFLB: TRACE$ MOVFLB ;Type debugging info
MOVE T1,MOVBLK+0 ;Get value of .RBEXT
HRRM T1,LKPBLK+.RBEXT ;Restore creation/access dates
DMOVE T1,MOVBLK+2 ;Get value of .RBVER, .RBSPL
DMOVEM T1,LKPBLK+.RBVER ;Restore them also
MOVE T1,MOVBLK+1 ;Get value of .RBPRV
MOVX T2,FX.PRO ;Get mask for /PROT switch for SCAN
TDNE T2,CSCBLK+.FXMOM ;Did the user specify a protection?
TXZA T1,RB.PRV ;Yes, clear the input file protection
SETZM LKPBLK+.RBPRV ;No, clear what SCAN setup
IORM T1,LKPBLK+.RBPRV ;Restore protection, mode, creation
POPJ P, ;Return
;Routine to fix up the scan blocks with actual filespecs. Must be
;called after the channel is opened.
;The call is:
; PUSHJ P,FIXFIL
; <Return here always>
FIXFIL: MOVSI T2,-FIXLEN ;-length of translation table
FIXFI1: HLRZ T3,FIXTAB(T2) ;Get returned filespec block offset
ADDI T3,FSPBLK ;Index into the block
HRRZ T4,FIXTAB(T2) ;Get scan block offset
ADDI T4,(T1) ;Index into the block
MOVE T3,(T3) ;Get data from returned filespec block
MOVEM T3,(T4) ;Store in the scan block
AOBJN T2,FIXFI1 ;Loop
SETOM .FXNMM(T1) ;Fix file name mask
HLLOS .FXEXT(T1) ;Fix extension mask
SETOM .FXDIM(T1) ;Fix directory mask
MOVSI T2,-.FXLND ;-number of directory words
HRR T2,T1 ;Copy address of filespec block
FIXFI2: SKIPN .FXDIR(T2) ;Have PPN or SFD?
POPJ P, ;No--done
SETOM .FXDIM(T2) ;Fix mask
ADDI T2,1 ;Account for two word entries
AOBJN T2,FIXFI2 ;Loop
POPJ P, ;Return
FIXTAB: .FOFDV,,.FXDEV ;Device
.FOFFN,,.FXNAM ;File name
.FOFEX,,.FXEXT ;Extension
.FOFPP,,.FXDIR ;PPN
.FOFSF+0,,.FXDIR+2 ;SFD #1
.FOFSF+1,,.FXDIR+4 ;SFD #2
.FOFSF+2,,.FXDIR+6 ;SFD #3
.FOFSF+3,,.FXDIR+10 ;SFD #4
.FOFSF+4,,.FXDIR+12 ;SFD #5
FIXLEN==.-FIXTAB ;Length of table
;Routines to copy input and output filespecs to the incore entry
;block. Call MOVIFS to move the input spec, MOVOFS to move the
;output spec and MOVCFS to move the new "to" spec for the MOVE command.
;The call is:
; PUSHJ P,MOV?FS
; <Return here always>
MOVCFS: TRACE$ MOVCFS ;Type debugging info
SETZM FENTRY+.CRTFL ;Clear first word of "to" spec
MOVE T1,[FENTRY+.CRTFL,,FENTRY+.CRTFL+1] ;Setup BLT pointer
BLT T1,FENTRY+.CRTFL+.CFLEN-1 ;Clear it all
MOVEI T1,CSCBLK ;Point to copy scan block
MOVEI T2,FENTRY+.CRTFL ;and at entry slot
PJRST MOVXFS ;Join common code
MOVIFS: TRACE$ MOVIFS ;Type debugging info
SETZM FENTRY ;Clear first word of entry
MOVE T1,[FENTRY,,FENTRY+1] ;Setup for BLT
BLT T1,FENTRY+.CRLEN-1 ;Clear it all
MOVEI T1,ISCBLK ;Point to input scan block
MOVEI T2,FENTRY+.CRFFL ; and at entry slot
PJRST MOVXFS ;Join common code
MOVOFS: TRACE$ MOVOFS ;Type debugging info
MOVEI T1,OSCBLK ;Point to output scan block
MOVEI T2,FENTRY+.CRTFL ; and at entry slot
MOVXFS: MOVE T3,.FXDEV(T1) ;Get device from scan block
MOVEM T3,.CFDEV(T2) ;Store in entry
MOVE T3,.FXNAM(T1) ;Get filename from scan block
MOVEM T3,.CFFIL(T2) ;Store in entry
HLLZ T3,.FXEXT(T1) ;Get extension from scan block
MOVEM T3,.CFEXT(T2) ;Store in entry
HRLI T2,-.FXLND ;Get AOBJN pointer to directory
MOVXF1: SKIPN T3,.FXDIR(T1) ;Get next word in directory
POPJ P, ;Return at end
MOVEM T3,.CFPTH(T2) ;Store in block
ADDI T1,2 ;Skip mask word in scan block
AOBJN T2,MOVXF1 ;Loop for all
POPJ P, ;Return
;Routine to check the STOPCD name extracted from the crash to make
;sure that it is really 3 alphanumeric characters.
;The call is:
; PUSHJ P,GETSTC
; <Return here always>
;Returns T2 = STOPCD name or 'SER' if none or STOPCD is bad
GETSTC: TRACE$ GETSTC ;Type debugging info
MOVE T2,[POINT 6,FENTRY+.CRSTC] ;Get byte pointer to STOPCD
MOVEI T3,3 ;Need to check three characters
GETST1: ILDB C,T2 ;Get next character
ADDI C," "-' ' ;Convert to ASCII
PUSHJ P,.TICAN## ;Alphanumeric?
JRST GETST2 ;No, return SER
SOJG T3,GETST1 ;Do them all
SKIPA T2,FENTRY+.CRSTC ;Return verified STOPCD name in T2
GETST2: MOVSI T2,'SER' ;Bad or none, return SER
POPJ P, ;Return
;Routine to type the status bits for a failing operation.
;The call is:
; MOVE T1,status bits
; PUSHJ P,TYPSTS
; <Return here always>
;Enter at SYSSTS to type the status from channel SYS.
SYSSTS: TRACE$ SYSSTS ;Type debugging info
GETSTS SYS,T1 ;Get the status
TYPSTS: TRACE$ TYPSTS,T1 ;Type debugging info
PUSH P,T1 ;Save the status
MOVEI T1,[ASCIZ/, Status = /] ;Get the message
PUSHJ P,.TSTRG## ;Type it
POP P,T1 ;Restore the status bits
PUSHJ P,.TOCTW## ;Type them
PJRST .TCRLF## ;End the line and return
SUBTTL GETTAB simulation from disk
;Routine to read needed GETTABs from the crash file and store the
;values in the CRASH.SYS entry area. Note that to improve efficiency,
;values in the same table should be requested in increasing order.
;The call is:
; PUSHJ P,GTBCRS
; <Return here always>
GTBCRS: TRACE$ GTBCRS ;Type debugging info
PUSHJ P,.SAVE1## ;Save P1
MOVSI P1,-5 ;Setup AOBJN pointer to monitor name
GTBCR1: MOVX T1,(%CNFG0) ;Get base entry
ADDI T1,(P1) ;Offset to this one
MOVSS T1 ;Back to GETTAB pointer
PUSHJ P,GTBDSK ;Read it
MOVEM T1,FENTRY+.CRMNM(P1) ;Store in entry
AOBJN P1,GTBCR1 ;Loop for all
MOVX T1,%CNVER ;Get version number
PUSHJ P,GTBDSK ; of monitor
MOVEM T1,FENTRY+.CRVER ;Store in entry
MOVX T1,%CNDTM ;Get universal
PUSHJ P,GTBDSK ; date/time of crash
MOVEM T1,FENTRY+.CRDDT ;Store in entry
MOVX T1,%CNSUP ;Get system uptime
PUSHJ P,GTBDSK ; in ticks
IMULI T1,^D1000 ;Compute number of milliseconds of
IDIV T1,TICSEC ; uptime from jiffies
MOVEM T1,FENTRY+.CRUPT ;Store in entry
MOVX T1,CRSHWD ;Get address of CRSHWD
PUSHJ P,PEKDSK ;Read it
MOVEI T1,0 ;Failed???
AOJE T1,GTBCR2 ;If -1, system was SHUT
MOVX T1,%SYSPC ;Get name of last
PUSHJ P,GTBDSK ; STOPCD
TRZ T1,-1 ;Forget about the PC
TLNE T1,003700 ;Test magic quantity to see if fullword pc
JRST GTBCR2 ; or stopcode name
MOVX T1,%SYSCD ;Get name of last
PUSHJ P,GTBDSK ; STOPCD
GTBCR2: MOVEM T1,FENTRY+.CRSTC ;Store in entry
AOS T1,HEADER+.CHSEQ ;Get next sequence number from header
PUSHJ P,.MKPJN## ;Convert to SIXBIT
PUSHJ P,GETSTC ;Get STOPCD name or SER in T2
HLL T1,T2 ;Build output filename
TXNE F,FL.OFL ;Was output filename specified?
MOVEM T1,OSCBLK+.FXNAM ;Store in output scan block
PUSHJ P,.GTNOW## ;Get universal date/time now
MOVEM T1,FENTRY+.CRCDT ; and store as date/time of copy
MOVX T1,%CNDBG ;DEBUGF GETTAB
PUSHJ P,GTBDSK ;Find in crash
MOVX T2,CR.RLD ;Bit to set
TXNE T1,ST%RLD ;This stopcode result in a reload?
IORM T2,FENTRY+.CRFLG ;Yes--remember for display
POPJ P, ;Return
;Routine to initialize to simulate GETTABs from the crash file.
;The call is:
; PUSHJ P,GTBINI
; <Return here always>
GTBINI: TRACE$ GTBINI ;Type debugging info
SETOM CURBLK ;Disallow initial block match
MOVEI T1,0 ;Get first word
PUSHJ P,PEKDSK ; of crash file
JRST GTBIN1 ;Failed
HLRZS T1 ;Isolate what should be directory code
CAXE T1,.SVDIR ;Is it?
JRST GTBIN1 ;No
MOVEI T1,ABSTAB ;Get absolute pointer to GETTABs
PUSHJ P,PEKDSK ;Get it
JRST GTBIN1 ;Failed
MOVEM T1,NUMTAB ;Save address of NUMTAB
CAILE T1,ABSTAB ;See if the number is
TLNE T1,-1 ; reasonable
JRST GTBIN1 ;No
MOVEI T1,.GTSLF(T1) ;Point to self pointer
PUSHJ P,PEKDSK ;Read it
JRST GTBIN1 ;Failed
TLZ T1,-1 ;Clear any junk
CAME T1,NUMTAB ;Is it consistent?
GTBIN1: SETZM NUMTAB ;No
POPJ P, ;Return
;Routine to read one GETTAB from a crash on disk.
;The call is:
; MOVE T1,GETTAB argument
; PUSHJ P,GTBDSK
; <Always return here with word in T1>
GTBDSK: TRACE$ GTBDSK,T1 ;Type debugging info
PUSH P,T1 ;Save argument
ADD T1,NUMTAB ;Offset to address of table
SKIPE NUMTAB ;Can't read if no GETTABs
PUSHJ P,PEKDSK ;Read word in NUMTAB
JRST [POP P,T1 ;Failed, flush stack
JRST GTBDS1 ; and return 0
]
POP P,T2 ;Restore GETTAB argument
HLRZS T2 ;Keep offset in table
ADDI T1,(T2) ;Point to word
PUSHJ P,PEKDSK ;Get the word
GTBDS1: MOVEI T1,0 ;Use standard default
POPJ P, ;Return
;Routine to read one word from a crash on disk.
;The call is:
; MOVEI T1,absolute address of word
; PUSHJ P,PEKDSK
; <Return here if failed>
; <Return here if succeeded with word in T1>
PEKDSK: TRACE$ PEKDSK,T1 ;Type debugging info
TLZ T1,-1 ;Clear junk in left half
CAIE T1,0 ;Reading EXE directory?
ADDI T1,EXESIZ ;No, offset for directory
IDIVI T1,BLKSIZ ;Convert to block, offset in block
CAMN T1,CURBLK ;See if block already in core
JRST PEKDS1 ;Yes, just read from core
MOVEM T1,CURBLK ;Save new one as current
USETI CRS,1(T1) ;USETI to correct block
INPUT CRS,BUFIOW ;Read block from crash
STATO CRS,IO.ERR!IO.EOF ;Any errors?
JRST PEKDS1 ;No, get word from core
SETSTS CRS,.IODMP ;Clear errors
SETOM CURBLK ;Force read of block
POPJ P, ;Return errors
PEKDS1: MOVE T1,BUF(T2) ;Get word from core
JRST .POPJ1## ; and give skip return
FDACHK: TXNN F,FL.RBS ;STARTED ON FRCLIN?
POPJ P, ;NO
MOVE T1,[F%FDAE&<-1,,0>!.GTFET] ;CHECK FILDAE SUPPORT
GETTAB T1, ;MONITOR BUILT FOR A FILE DEAMON?
MOVEI T1,0 ;ASSUME NOT
TXNN T1,F%FDAE&<0,,-1> ;FILE DAEMON MONITOR?
POPJ P, ;NO NEED TO WAIT
MOVNI T2,1 ;INIT FLAG
JRST FDACH2 ;SEE IF A FILE DAEMON IS RUNNING
FDACH1: TELL (WFD,<Waiting for file daemon to start>,,)
MOVEI T1,.FDTIM ;TOTAL TIME TO WAIT
SLEEP T1, ;ZZZZZZ
FDACH2: MOVE T1,[%SIFDA] ;GETTAB ARGUMENT
GETTAB T1, ;TRY TO READ THE FILE DAEMON PID
MOVEI T1,0 ;NOT THERE
JUMPN T1,.POPJ## ;RETURN IF IT'S RUNNING
AOJE T2,FDACH1 ;JUMP IF FIRST TIME THROUGH
WARN (FDS,<The file daemon did not start; proceeding>,,)
POPJ P, ;PROCEED
SUBTTL Summary routines
; Routine to initialize summary data storage
SUMINI: MOVE T1,[SM.BEG,,SM.BEG+1] ;Set up BLT
SETZM SM.BEG ;Clear first word
BLT T1,SM.END-1 ;Clear to end of summary data
TXNN F,FL.TTY ;Output to a TTY?
JRST SUMIN1 ;No
MOVE T1,[2,,T2] ;Set up UUO AC
MOVEI T2,.TOWID ;Function code to read the width
MOVE T3,ISCBLK+.FXDEV ;Get output device name
IONDX. T3, ;Convert to a UDX
SKIPA ;Strange ...
TRMOP. T1, ;Read the width
MOVEI T1,^D80 ;Default
JRST SUMIN2 ;Onward
SUMIN1: MOVEI T1,^D80 ;Assume normal listing
MOVE T2,F.DETL ;Get /DETAIL
CAIN T2,DTLALL ;All?
MOVEI T1,^D132 ;Yes--a wide listing
SUMIN2: IDIVI T1,^D15 ;Columns per stopcode summary display
MOVEM T1,WIDTH ;Save count
POPJ P, ;Return
; Routine to check and account for the number of crashes and the types
SUMCRS: AOS CRSNUM ;Count the crash
MOVE T1,FENTRY+.CRFLG ;Get flags for this entry
TXNE T1,CR.ACT ;Active?
AOS ACTNUM ;Count it
TXNN T1,CR.DSP ;Disposed?
AOS UNDNUM ;No--must be undisposed
TXNE T1,CR.RLD ;Crash caused a reload?
AOS RLDNUM ;Count it
MOVSI T1,-.STPNM ;Get -length of stopcode table
SKIPN T2,FENTRY+.CRSTC ;Get stopcode name
MOVSI T2,'???' ;Turn blank names into something readable
SUMCR1: SKIPN T3,STPNAM(T1) ;Get name from table
JRST SUMCR2 ;Empty--go add
CAME T2,T3 ;A match?
AOBJN T1,SUMCR1 ;Search table
JUMPGE T1,.POPJ## ;Return if no room in table
SKIPA ;Don't update number of table entries
SUMCR2: HRRZM T1,SUMNUM ;Save new number of table entries
MOVEM T2,STPNAM(T1) ;Add/overwrite name
AOS STPCNT(T1) ;Count it
POPJ P, ;And return
SUMMAR: SKIPN CRSNUM ;Found any crashes?
POPJ P, ;No summary needed
MOVE T1,F.SUMM ;Get /SUMMARY
CAIE T1,SUMALL ;All?
CAIN T1,SUMSTOPCODES ;Stopcodes?
PUSHJ P,SUMSTP ;Print summary by stopcode names
MOVE T1,F.SUMM ;Get /SUMMARY
CAIE T1,SUMALL ;All?
CAIN T1,SUMTOTALS ;Totals?
PUSHJ P,SUMPRT ;Print summary by crash types
POPJ P, ;Return
; Routine to display a summary of the different stopcodes
SUMSTP: PUSHJ P,.SAVE4## ;Save some ACs
PUSHJ P,SUMSRT ;Sort the stopcode tables
MOVEI T1,[ASCIZ /
Stopcode summary:/]
PUSHJ P,.TSTRG## ;Print text
AOS P1,SUMNUM ;Get number of table entries
IDIV P1,WIDTH ;Compute lines of output needed
SKIPE P2 ;Overflow?
AOS P1 ;Need one more
MOVEI P2,(P1) ;Save incremental adjustment
MOVNS P1 ;Negate
HRLZS P1 ;Make an AOBJN pointer
SUMST1: MOVEI P3,1 ;Init column counter
PUSHJ P,.TCRLF## ;Start line with a CRLF
SUMST2: MOVEI T1,[ASCIZ / /]
PUSHJ P,.TSTRG## ;Space over
MOVEI P4,-1(P3) ;Get column number
IMULI P4,(P2) ;Compute next entry needed
ADD P4,P1 ;Adjust pointer
SKIPN T2,STPNAM(P4) ;Get a stopcode name
JRST SUMST4 ;Need to advance to next line
MOVEI T3,6 ;6 characters
SUMST3: LSHC T1,6 ;Get a character
ANDI T1,77 ;Strip off junk
ADDI T1," " ;Convert to ASCII
PUSHJ P,.TCHAR## ;Print character
SOJG T3,SUMST3 ;Loop through name
PUSHJ P,.TSPAC## ;Space over
MOVE T2,STPCNT(P4) ;Get count
CAIG T2,^D999 ;Above 999?
PUSHJ P,.TSPAC## ;No
CAIG T2,^D99 ;Above 99?
PUSHJ P,.TSPAC## ;no
CAIG T2,^D9 ;Above 9?
PUSHJ P,.TSPAC## ;no
MOVE T1,T2 ;Get count
PUSHJ P,.TDECW## ;Print it
CAMGE P3,WIDTH ;Do all columns yet?
AOJA P3,SUMST2 ;No
SUMST4: AOBJN P1,SUMST1 ;Else start another line
CAIE P3,1 ;End of line already?
PUSHJ P,.TCRLF## ;No--put us there
POPJ P, ;Return
; Routine to display summary of crashes
SUMPRT: PUSHJ P,.SAVE1## ;SAVE P1
SKIPN STPCNT ;Found any stopcodes?
POPJ P, ;No
PUSHJ P,.TCRLF## ;Start with a CRLF
MOVEI T1,[ASCIZ /Total of /]
PUSHJ P,.TSTRG## ;Print text
MOVNI P1,1 ;Init counter
SKIPG T1,UNDNUM ;Any undisposed?
JRST SUMPR1 ;No
PUSHJ P,SUMCNT ;Count this one
PUSHJ P,.TDECW## ;Print number
MOVEI T1,[ASCIZ / undisposed/]
PUSHJ P,.TSTRG## ;Print text
SUMPR1: SKIPG T1,ACTNUM ;Any active?
JRST SUMPR2 ;No
PUSHJ P,SUMCNT ;Count this one
PUSHJ P,.TDECW## ;Print number
MOVEI T1,[ASCIZ / active/]
PUSHJ P,.TSTRG## ;Print text
SUMPR2: SKIPG T4,RLDNUM ;Any reloads?
JRST SUMPR3 ;No
PUSHJ P,SUMCNT ;Count this one
MOVE T1,T4 ;Copy
PUSHJ P,.TDECW## ;Print number
MOVEI T1,[ASCIZ / reload/] ;Assume one
CAIE T4,1 ;Only one?
MOVEI T1,[ASCIZ / reloads/] ;Nope
PUSHJ P,.TSTRG## ;Print text
SUMPR3: MOVEI T1,[ASCIZ / in /]
PUSHJ P,.TSTRG## ;Print text
MOVE T1,CRSNUM ;Get stopcode count
PUSHJ P,.TDECW## ;Print number
MOVEI T1,[ASCIZ / stopcode; /] ;Assume one
MOVE T2,CRSNUM ;Get count again
CAIE T2,1 ;Only one?
MOVEI T1,[ASCIZ / stopcodes; /] ;Make plural
PUSHJ P,.TSTRG## ;Print text
MOVE T1,UNDNUM ;Get total undisposed
ADD T1,ACTNUM ;Add total active
MOVEI P1,[ASCIZ / on disk/] ;Assume several exist
CAIN T1,0 ;Zero?
MOVEI P1,[ASCIZ /none on disk/]
CAIN T1,1 ;One?
MOVEI P1,[ASCIZ /one on disk/]
CAIL T1,2 ;Several exist?
PUSHJ P,.TDECW## ;Yes
MOVE T1,P1 ;Point to text
PUSHJ P,.TSTRG## ;Print it
PJRST .TCRLF## ;End with a CRLF and return
SUMCNT: AOSN P1 ;First time here?
POPJ P, ;Yes--just count it and return
PUSH P,T1 ;Save T1
PUSHJ P,.TCOMA## ;Start with a comma
PUSHJ P,.TSPAC## ;and a space
POP P,T1 ;Get T1 back
POPJ P, ;Return
SUMSRT: MOVSI P1,-.STPNM ;AOBJN pointer
MOVEI P2,0 ;Init counter
SUMSR1: DMOVE T1,STPNAM(P1) ;Get two stopcode names
JUMPE T2,SUMSR3 ;Defend against odd number of entries
CAMG T1,T2 ;Need to swap?
JRST SUMSR2 ;No
EXCH T1,T2 ;Swap
DMOVEM T1,STPNAM(P1) ;Replace
DMOVE T1,STPCNT(P1) ;Get counts
EXCH T1,T2 ;Ditto
DMOVEM T1,STPCNT(P1) ;Update
AOS P2 ;Count the change
SUMSR2: AOBJN P1,SUMSR1 ;Loop
SUMSR3: JUMPE P2,.POPJ## ;Return if no more changes
JRST SUMSRT ;Else do it again
SUBTTL Program initialization routines
;Routine to perform any initialization functions necessary.
;The call is:
; PUSHJ P,CRSINI
; <Return here always>
CRSINI: TRACE$ CRSINI ;Type debugging info
STORE T1,BGNONE,ENDONE,-1 ;Initialize switches to -1
STORE T1,BGNZER,ENDZER,0 ;Initialize other variables to zero
MOVSI T1,-GTBTBL ;Get AOBJN pointer to table of GETTABs
CRSIN1: MOVE T2,GTBTAB(T1) ;Get next GETTAB argument
GETTAB T2, ;Get value from monitor
MOVE T2,GTBDFL(T1) ;Shouldn't happen, but...
MOVEM T2,GTBVAL(T1) ;Store in table
AOBJN T1,CRSIN1 ;Loop for all
PUSHJ P,.GTNOW## ;Get current date/time
MOVEM T1,CURDAT ;Store it
PJOB T1, ;Get our job number
MOVEM T1,MYJOB ;Store
MOVX T1,.TODSP ;Get TRMOP. function to type characters
MOVEM T1,DSPCOD ;Store in TRMOP. block
MOVE T1,[SIXBIT/OPR0/] ;Need UDX of central site OPR
IONDX. T1, ;Get it
MOVEI T1,0 ;Shouldn't happen
MOVEM T1,OPRLIN ;Store for /INFORM:OPR messages
MOVEI T1,ASCCHR ;Point to character buffer
MOVEM T1,ASCPTR ;Store in TRMOP. block
MOVE T1,.JBFF ;Get minimum core value
MOVEM T1,MINCOR ;Store
SKIPN .JBDDT ;Protect VMDDT
CORE T1, ;Reduce core to that
JFCL ;Don't care
TXNE F,FL.RBS ;Run by system, i.e., logged out?
PUSHJ P,SETSRC ;Yes, setup a search list so SCAN can
; read SWITCH.INI from [2,5]
POPJ P, ;Return
;Routine to create a job search list for this job from the first
;.SLSTR structures in the system search list. This routine is
;only needed until SCAN can be taught to read the system wide
;options file (INI:SWITCH.INI). Until then, we must setup a
;job search list so that .OSCAN will find a SWITCH.INI in [2,5]
;if one exists.
;The call is:
; PUSHJ P,SETSRC
; <Return here always>
SETSRC: TRACE$ SETSRC ;Type debugging info
SETOM GSTBLK+.DFGNM ;Set to get first STR in SSL
MOVSI T1,-.SLSTR ;Get aobjn pointer to STRUUO block
SETSR1: MOVE T2,[.DFGNM+1,,GSTBLK] ;Get pointer to GOBSTR block
GOBSTR T2, ;Get next STR in SSL
JRST SETSR2 ;Shouldn't happen
SKIPN T2,GSTBLK+.DFGNM ;Get name, skip if not fence
JRST SETSR2 ;Less than .SLSTR STRs in the SSL
MOVEM T2,STUBLK+.FSCSO(T1) ;Store in STRUUO block
ADDI T1,.FSDFL-1 ;Skip past directory and status words
AOBJN T1,SETSR1 ; and loop for more
SETSR2: MOVEI T2,.FSSRC ;Code to define job search list
MOVEM T2,STUBLK+.FSFCN ;Store in STRUUO block
MOVSI T1,.FSCSO(T1) ;Get length of block in LH
HRRI T1,STUBLK ;Point to block
STRUUO T1, ;Define the search list
JFCL ;Can't do much
POPJ P, ;Return
;Routine to conditionally clear JACCT. If the symbol DFTPPN is set
;non-zero and CRSCPY is running under that PPN and FILDAE is not running,
;don't clear JACCT to allow DEC to dispose of crashes during field
;test. DFTPPN should be set to zero if you are not field testing or
;if you run FILDAE.
;The call is:
; PUSHJ P,CLRJAC
; <Return here always>
CLRJAC: TRACE$ CLRJAC ;Type debugging info
IFN DFTPPN,<
MOVX T1,%SIFDA ;GETTAB arg to get FILDAEs PID
GETTAB T1, ;Get it
MOVEI T1,0 ;Assume not running
JUMPN T1,CLRJA1 ;Go if running
GETPPN T1, ;Get our PPN
JFCL ;Avoid alternate return
CAXN T1,DFTPPN ;Match with the DEC field test PPN?
POPJ P, ;Yes, don't clear JACCT
CLRJA1:
> ;End IFN DFTPPN
MOVE T1,PRGNAM ;Get our name
SETNAM T1, ;Clear JACCT
POPJ P, ;Return
SUBTTL Command output routines
;Routine to issue a prompt to the terminal.
;The call is:
; MOVEI T1,prompt character or -1 if continuation
; PUSHJ P,PROMPT
; <Return here always>
PROMPT: TRACE$ PROMPT,T1 ;Type debugging info
TXNE F,FL.RBS ;Run by system?
JRST [PUSHJ P,.MONRT## ;Yes, let SCAN exit for us
JRST . ;No CONTINUEs
]
SKPINL ;Defeat ^O
JFCL ;Don't care about return
SKIPL T1 ;Continuation line?
OUTSTR [ASCIZ/CRSCPY>/] ;No, issue standard prompt
SKIPGE T1 ;Continuation line?
OUTSTR [ASCIZ/#/] ;Yes, use pound sign
POPJ P, ; and return
;Routine called from SCAN when an EXIT should be done. If we are
;logged out, do a LOGOUT instead.
;The call is:
; PUSHJ P,MONRET
; <Return here if CONTINUE>
MONRET: PUSHJ P,.ISLGI## ;Are we logged in?
JRST KJOB ;No, do a logout
RESET ;Yes, reset the world
MONRT. ;Exit quietly
POPJ P, ;Return if continue
KJOB: MOVEI T1,.FSDSL ;Function to define S/L
SETOB T2,T3 ;my job, my PPN
MOVX T4,DF.SRM ;Delete all strs
MOVE P1,[4,,T1] ;set up uuo AC
STRUUO P1, ;kill S/L
JFCL ;shouldn't fail
LOGOUT ;kjob
;Routine to output one character. Uses TRMOP. to device OPR
;if FL.RBS is on or the user said /INFORM:OPR.
;The call is:
; MOVEI T1,character
; PUSHJ P,W.TTY
; <Return here always>
W.TTY: PUSH P,T1 ;Save the character
MOVE T1,S.INF ;Get value of /INFORM
TXNN F,FL.RBS ;Run by system?
CAXLE T1,INFUSER ;/INFORM:USER or none specified?
JRST W.TTY1 ;No, use TRMOP.
OUTCHR 0(P) ;Output the character
JRST TPOPJ ; and return
W.TTY1: MOVE T1,0(P) ;Get character back
DPB T1,[POINT 7,ASCCHR,6] ;Store character in TRMOP. block
MOVE T1,[3,,DSPCOD] ;Point to TRMOP. block
TRMOP. T1, ;Output the character
JFCL ;Can't do much
TPOPJ: POP P,T1 ;Restore character
POPJ P, ; and return
SUBTTL Message processing routines
;Routines to print a fatal, warning, or informative message on the TTY.
;All are called as follows:
;
; PUSHJ P,.XXX
; CAI Code,[XWD Prefix,[Message]]
; <return here unless EO.STP specified>
;
;Where Code is the error option code (see EO.XXX)
; Prefix is the CRSCPY error message prefix
; Message is the message to be printed
.ERR: TXO F,FL.ERR ;Set fatal error flag
PUSHJ P,.PSH4T## ;Save T1-T4
MOVX T4,"?" ;Get error character
PJRST ERRCOM ;Join common routine
.WARN: TXO F,FL.WRN ;Set warning message flag
PUSHJ P,.PSH4T## ;Save T1-T4
MOVX T4,"%" ;Get error character
PJRST ERRCOM ;Join common routine
.TELL: TXO F,FL.TEL ;Set info message flag
PUSHJ P,.PSH4T## ;Save T1-T4
MOVX T4,"[" ;Get error character
;; PJRST ERRCOM ;Join common code
ERRCOM: MOVSI T1,'CCP' ;Get our mnemonic
HRRZ T2,-4(P) ;Get addr of CAI word (offset for .PSH4T)
MOVE T2,@(T2) ;Get prefix,,Addr of message
HLR T1,T2 ;Add prefix error code
HRL T2,T4 ;Put in leading character
PUSHJ P,.ERMSG## ;Let SCAN do the work
LDB T1,[POINT 4,@-4(P),12] ;Get code from AC field of CAI word
TXZE F,FL.TEL ;Was it informative?
CAXN T1,EO.NCR ; or no CRLF wanted?
CAIA ;Yes, don't type right bracket
PUSHJ P,.TRBRK## ;Put out a right bracket
LDB T1,[POINT 4,@-4(P),12] ;Get code back
CAXG T1,EO.MAX ;Larger than max?
JUMPN T1,@[DOEXIT
ERRCO1]-1(T1) ;Dispatch based on error code
PUSHJ P,.TCRLF## ;End message with CRLF
ERRCO1: PUSHJ P,.POP4T## ;Restore T1-T4
PJRST .POPJ1## ;Return, skipping CAI word
DOEXIT: PUSHJ P,.MONRT## ;Let SCAN kill the program
JRST .-1 ;No continue
SUBTTL Debug package
;Routine to print debug information upon entry to a subroutine.
;Assembled and called only if the switch DEBUG$ is non-zero.
;The call is:
;
; PUSHJ P,.DEBUG ;From TRACE$ macro
; CAI [SIXBIT/NAME/ ;Routine name
; EXP LOC1 ;Address of first loc
; EXP LOC2 ;Address of second loc
; :
; EXP LOCN ;Address of nth loc
; XWD -1,0] ;-1,,0 terminates block
; <always return here>
IFN DEBUG$, < ;Assemble only if debugging
.DEBUG: MOVEM 16,DEBAC+16 ;Save AC 16
MOVX 16,<0,,DEBAC> ;Build BLT pointer
BLT 16,DEBAC+15 ;Save all AC's
HRRZ P1,@0(P) ;Get address of CAI block
MOVEI T1,[BYTE (7)76,76,40,0,0] ;Two angle brackets and a space
PUSHJ P,.TSTRG## ;Type it
MOVE T1,(P1) ;Get SIXBIT routine name
PUSHJ P,.TSIXN## ;Type in SIXBIT
MOVEI T1,[ASCIZ/ called from PC /]
PUSHJ P,.TSTRG## ;Type it
HRRZ T1,-1(P) ;Get PC of caller of subroutine
SUBI T1,1 ;Make it point to the caller
MOVEI P2,(T1) ;Save in P2
PUSHJ P,.TOCTW## ;Type in octal
MOVEI T1,[ASCIZ/ = /] ;Separator
PUSHJ P,.TSTRG## ;Type it
PUSHJ P,STSRCH ;Find PC symbolic loc and type it
PUSHJ P,.TCRLF## ;End the line
.DEBU1: SKIPGE 1(P1) ;Done all of them yet?
JRST .DEBU2 ;Yes
MOVEI T1,[ASCIZ/ C(/] ;Prefix for location name
PUSHJ P,.TSTRG## ;Type it
MOVE P2,1(P1) ;Get address of location
PUSHJ P,STSRCH ;Search symbol table for it
MOVEI T1,[ASCIZ/) = /]
PUSHJ P,.TSTRG## ;Type separator
CAIG P2,16 ;Is it an AC?
MOVEI P2,DEBAC(P2) ;Yes, point at AC block
MOVE T1,(P2) ;Get value of address
PUSHJ P,.TXWDW## ;Type as halfwords
PUSHJ P,.TCRLF## ;End the line
AOJA P1,.DEBU1 ;Bump CAI block pointer and loop
.DEBU2: MOVX 16,<DEBAC,,0> ;Setup BLT pointer to restore AC's
BLT 16,16 ; and do so
PJRST .POPJ1## ;Return skipping CAI word
;Routine to search the symbol table for an address and print the
;symbolic name of that address. If no exact match is found, the closest
;symbolic name plus offset from that name is printed.
;The call is:
;
; MOVEI P2,Address to find
; PUSHJ P,STSRCH
; <always return here>
STSRCH: SKIPN T2,.JBSYM ;Have a symbol table?
JRST [MOVEI T1,(P2) ;No, get octal value of address
PJRST .TOCTW## ; and print it in octal
]
SETZB P3,P4 ;P3=Closest ST ptr, P4=Closest value
STSRC1: MOVE T1,1(T2) ;Get value of next symbol
CAML T1,P4 ;If less than the closest we've seen
CAILE T1,(P2) ; or greater than the one we want,
JRST STSRC2 ; ignore it
MOVEI P3,(T2) ;Save pointer to closest one we've seen
MOVE P4,T1 ; plus value of that symbol
STSRC2: AOBJP T2,STSRC3 ;Quit when we run out of symbol table
CAME P2,T1 ; or if we find an exact match
AOBJN T2,STSRC1 ;Else loop for next symbol
STSRC3: MOVE T2,0(P3) ;Get RADIX50 name for the symbol
PUSHJ P,PRDX50 ; and print it
MOVEI T1,(P2) ;Get address we wanted to find
SUB T1,P4 ;Compute offset from address we found
JUMPE T1,.POPJ## ;If exact match, quit now
PUSH P,T1 ;Save offset
MOVEI T1,"+" ;To indicate offset
PUSHJ P,.TCHAR## ;Print the plus
POP P,T1 ;Restore the offset
PJRST .TOCTW## ;Print it and return
;Routine to print a radix 50 symbol on the terminal. The
;call is:
;
; MOVE T2,Symbol to print
; PUSHJ P,PRDX50
; <always return here>
PRDX50: MOVEI T1,6 ;Number of chars to print
TXZ T2,17B3 ;Clear code from symbol table
MOVEI T4,0 ;T4=Register in which to build SIXBIT name
PRDX51: IDIVI T2,50 ;Get next char in T3
ROT T3,-1 ;Index in RH, Halfword flag in 1B0
SKIPGE T3 ;Skip if character in LH of RDX50T
SKIPA T3,RDX50T(T3) ;Pick up RH character
MOVS T3,RDX50T(T3) ;Pick up LH character
LSHC T3,-6 ;Shift into accumulated SIXBIT word
SOJG T1,PRDX51 ;Loop for next character
MOVE T1,T4 ;Get accumulated SIXBIT equivalent
PJRST .TSIXN## ;Print in SIXBIT and return
;Table of SIXBIT equivalent characters indexed by the RADIX 50
;character set.
RDX50T: XWD ' ','0' ;Space, Zero
XWD '1','2' ;One, Two
XWD '3','4' ;Three, Four
XWD '5','6' ;Five, Six
XWD '7','8' ;Seven, Eight
XWD '9','A' ;Nine, A
XWD 'B','C' ;B, C
XWD 'D','E' ;D, F
XWD 'F','G' ;F, G
XWD 'H','I' ;H, I
XWD 'J','K' ;J, K
XWD 'L','M' ;L, M
XWD 'N','O' ;N, O
XWD 'P','Q' ;P, Q
XWD 'R','S' ;R, S
XWD 'T','U' ;T, U
XWD 'V','W' ;V, W
XWD 'X','Y' ;X, Y
XWD 'Z','.' ;Z, Period
XWD '$','%' ;Dollar sign, Percent sign
$LOW
DEBAC: BLOCK 17 ;AC save area
DEBALL: EXP 0 ;Deposit non-zero to type info
$HIGH
> ;End IFN DEBUG$
END CRSCPY