Trailing-Edge
-
PDP-10 Archives
-
cuspmar86binsrc_2of2_bb-fp63a-sb
-
10,7/link/lnkscn.mac
There are 48 other files named lnkscn.mac in the archive. Click here to see a list.
TITLE LNKSCN - INTERFACE TO SCAN FOR LINK
SUBTTL D.M.NIXON/DMN/JLd/JNG/PAH/DZN/PY/JBS 2-Oct-85
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1973,1984,1986. ALL RIGHTS RESERVED.
;
;
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
;ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
;INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
;COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
;OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
;TRANSFERRED.
;
;
;THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
;AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
;CORPORATION.
;
;DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
;SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
SEARCH LNKPAR,LNKLOW,MACTEN,UUOSYM,SCNMAC
IFN TOPS20,<SEARCH MONSYM,MACSYM> ;[2071]
SALL
ENTRY LNKSCN
EXTERN LNKLOD,LNKCOR,LNKLOG,.TYOCH
CUSTVR==0 ;CUSTOMER VERSION
DECVER==6 ;DEC VERSION
DECMVR==0 ;DEC MINOR VERSION
DECEVR==2335 ;DEC EDIT VERSION
VERSION
SEGMENT
SUBTTL COMMUNICATION WITH SCAN
EXTERN .ISCAN,.TSCAN,.OSCAN
EXTERN .POPJ1,.SWDEC,.SWOCT,.SWSIX,F.NAM,.OCTNW
;COMMUNICATION WITH .TYOCH
EXTERN .TCHAR,.TCRLF,.TDECW,.TOCTW,.TSIXN,.TSTRG,.TIAUC
;ACCUMULATORS
C==P4 ;CHARACTER INPUT
SUBTTL REVISION HISTORY
;START OF VERSION 1A
;37 ADD GARBAGE COLLECTOR AT CLANS
;47 INTEGRATE WITH SCAN %4
;52 ADD ASCIZ TEXT BLOCK
;60 ADD /VERSION SWITCH, MOVE .INSUB TO LNKSCN.MAC
;71 ADD PEF MESSAGE
;START OF VERSION 1B
;121 (12145) .VERSW DOESN'T PRESERVE P4, /VER:1(20) FAILS
;START OF VERSION 2
;141 TURN ON ASCII TEXT BLOCK
;145 ADD /USERLIB & /NOUSERLIB SWITCHES
;147 TURN ON MIXFOR FEATURE
;150 REMOVE EDIT #71 (PEF MESSAGE)
;151 (12491) CALL .OSCAN CORRECTLY
;165 INTEGRATE WITH SCAN %5(356), REMOVE .VERSW
;START OF VERSION 2B
;253 Fix ASCII blocks:
; if in CCL mode, tell SCAN to read our input
; if multi-line, keep byte pointer so don't lose characters
; if error, SCAN comes back for more, even if none
;264 Allow editing of bad file specs. when indirect
;411 If SCAN retruns again after the end of an ASCII block,
; hand it "/K<eol>" so it will return from .TSCAN
;426 Suppress the prompt characters while processing ASCII text.
;427 Save all of SCAN's ACs in TXTIN.
;430 Prevent hanging in TI state while reading ASCII text.
;433 Properly support the /RUN switch.
;436 Defeat ^O when prompting.
;START OF VERSION 2C
;534 Fix problems with .OSCAN, ASCII text, and add /CRLF.
;554 Fix problems with switch scanning for cases like /SAVE.
;557 Clean up listing for release.
;START OF VERSION 3A
;560 Release on both TOPS-10 and TOPS-20 as LINK version 3A(560)
;START OF VERSION 4
;600 Remove call to DEFVALUES macro
;731 SEARCH MACTEN,UUOSYM
;740 Remove .SWVER code.
;765 Release on both TOPS-10 and TOPS-20 as LINK version 4(765)
;START OF VERSION 4A
;1122 Remove edit 740.
;1167 Don't allow symbol names to start with digits.
;1174 Label and clean up all error messages.
;1217 Clean up the listings for release.
;1220 Release on both TOPS-10 and TOPS-20 as version 4A(1220).
;START OF VERSION 4B
;1221 Allow .R LINK (commands) and @LINK commands
;1252 Remove edit 1221 on TOPS-20.
;1301 Use the message bits from SCAN.
;Start of Version 5.1
;2026 Update copyright notice.
;2071 Search MONSYM and MACSYM
;Start of Version 6
;2220 Handle long symbol typein.
;2306 Handle long ascii PDV name, version format PDV version.
;2312 Allow Radix-50 special characters in PDV names, insure null byte.
;2323 Allow case-sensitive symbol typein in quotes.
;2334 Fix default for symbols, octal version typein.
;2335 Update copyright statement.
SUBTTL INITIALIZE SCANNER
LNKSCN: JFCL .+1 ;NORMAL ENTRY
SKIPE F.EDIT ;ARE WE CORRECTING SPEC?
JRST [MOVEI T1,FORCIN ;FORCE INPUT FROM TTY:
PUSHJ P,.TYPRE## ; INCASE INDIRECT/CCL
JRST MAINLP] ;GO GET LINE
SKIPE F.ASCI ;HOW ABOUT ASCII TEXT?
JRST [MOVEI T1,USRIN ;YES, READ IT INSTEAD
PUSHJ P,.TYPRE## ;EVEN IF IND/CCL
JRST MAINLP] ;GO GET COMMAND
MOVEI T1,0 ;NO, SET INPUT TO START
PUSHJ P,.TYPRE ; OR CONTINUE NORMAL SOURCE
SKIPE N.ZER## ;CALLED TO PROCESS /RUN?
JRST [PUSHJ P,.RUNCM## ;YES, DO THE RUN
HRRZ T1,.JBSA## ;RESTART IF FAILED
JRST (T1)]
E$$SNL::.ERR. (MS,,V%L,L%I,S%I,SNL,<Scanning new command line>) ;[1174]
SETZ T1, ;SCAN CAN USE TTCALLS
PUSHJ P,.TYOCH## ;SINCE PROBLEM WITH EXECUTE ONLY HACK
MOVE T1,.ISBLK ;DATA BLOCK FOR .ISCAN
SKIPL OSCANF ;ONLY INITIALIZE ONCE
PUSHJ P,.ISCAN ;INITIALIZE COMMAND SCANNER
SKIPE T1,TTYSUB ;NOW WE CAN SET LINE BUFFERING ROUTINE
PUSHJ P,.TYOCH## ;UNLESS STILL ZERO
SUBTTL MAIN LOOP FOR COMMAND SCANNING
MAINLP: MOVE T1,.JBREL ;SET .JBFF OUTSIDE CORE RANGE
MOVEM T1,.JBFF ;INCASE /HELP
MOVE T1,.TSBLK ;DATA BLOCK FOR .TSCAN
PUSHJ P,.TSCAN ;GET THE COMMAND
HLRZ T1,.FLVRB## ;[1301] GET THE /MESSAGE MASK
ANDCAM T1,VERLVL ;[1301] RESET SPECIFIED BITS
HRRZ T1,.FLVRB## ;[1301] GET THE BITS SET BY /MESSAGE
IOR T1,VERLVL ;[1301] GET THE OLD BITS TOO
SKIPN T1 ;[1301] ANY BITS SET
MOVX T1,M%P!M%F ;[1301] NO, USE THE DEFAULT
TXNE T1,M%C ;[1301] USER WANT CONTINUATION?
TXO T1,M%F ;[1301] YES, MAKE SURE HE GETS FIRST TOO
MOVEM T1,VERLVL ;[1301] STORE THE RESULT
IFN FTOPTION,<
SKIPE OSCANF ;-1 IF ALREADY DONE FOR THIS LOAD
JRST MAINL1 ;NOT FIRST TIME
PUSH P,F.NXZR ;SAVE PTR TO END OF SCAN CHAIN
PUSH P,F.INZR ;AND TO BEGINNING
SETZM F.NXZR ;ZAP SO WON'T UPSET CLANS
SETZM F.INZR ;..
SETZM SWFLAG ;NO SWITCHES YET SEEN
MOVE T1,.OSBLK ;DATA BLOCK FOR OPTION FILE
PUSHJ P,.OSCAN ;READ USER OPTION PROFILE
MOVEI T2,F.INZR ;START OF NEW LIST
MOVE T1,T2 ;NOT YET END OF LIST
HRRZ T2,(T1) ;LIST TERMINATED?
JUMPN T2,.-2 ;NO
POP P,T2 ;GET PREVIOUS LIST
HRRM T2,(T1) ;LINK INTO NEW LIST
POP P,F.NXZR ;MAKE SURE END OF CHAIN IS OK
SETZM SWFLAG ;CLEAR SWITCH SEEN FLAG
>;END OF IFN FTOPTION
SETOM OSCANF ;ONLY ONCE
MAINL1: HRRZS F.NXZR ;MAKE SURE LH ISN'T -1 FROM USRSWT
SKIPN F.INZR ;ANYTHING TO LOAD?
JRST MAINLP ;NO, TRY AGAIN
MOVE T1,F.INZR ;POINT TO CURRENT DATA BLOCK
ADDI T1,F.ZER ;POINT TO START OF SCAN INFO
MOVEM T1,F.WLZR ;FOR WILD
MOVE T1,LOGSUB ;RESET LOG DEVICE
PUSHJ P,.TYOCH ;SINCE SCAN WIPES IT OUT
SKIPL GOTO ;SEEN /G YET?
JRST MAINRT ;NO, LOAD WHAT WE HAVE
SETZM GOTO ;DON'T CONFUSE LNKLOD
PUSHJ P,.KLIND## ;IF CCL MODE DELETE TEMP FILE
MAINRT: IFN FTOVERLAY,<
SKIPE OVERLW ;LOADING IN OVERLAY MODE
JRST LNKOV1## ;YES
>
JRST LNKLOD## ;AND LOAD THIS
.ISBLK: 5,,.+1
IFE TOPS20,< ;[1252]
IOWD 1,[SIXBIT /LINK/] ;[1221] ALLOW MONITOR COMMANDS
>
IFN TOPS20,< ;[1252]
0 ;[1252] RESCAN DOES NOT WORK WITH TOPS-20
> ;[1252]
OFFSET,,'LNK'
USRIN,,0
0
UPRMPT,,0
.TSBLK: 9,,.+1
IOWD LNKSWL,LNKSWN
LNKSWD,,LNKSWM
0,,LNKSWP
-1
CLANS,,0
AIN,,AOUT
0
0,,FS.MOT!FS.MIO
0,,USRSWT
IFN FTOPTION,<
.OSBLK: 4,,.TSBLK+1
>;END OF IFN FTOPTION
;SUBROUTINE TO CLEAR ANSWER AREA
CLRRET: PUSHJ P,DY.RET## ;RESTORE SPACE
CLANS: ;CLEAR START OF PARAMS
SKIPN T1,F.INZR ;NEED TO GARBAGE COLLECT?
JRST CLANZ ;NO
SKIPE T3,1(T1) ;YES, ANY SWITCHES FOR THIS SPEC?
JRST CLANSW ;YES, RETURN THEM FIRST
HRRZ T2,0(T1) ;GET NEXT POINTER
MOVEM T2,F.INZR ;STORE BACK FOR NEXT TIME ROUND
MOVEI T2,F.LEN ;LENGTH WE ALLOCATED
JRST CLRRET ;RETURN SPACE
CLANSW: EXCH T1,T3 ;PUT ADDRESS OF SWITCH IN T1
TLNN T1,-1 ;LEFT HALF SWITCH?
JRST CLANRS ;NO, TRY RIGHT
HLRZ T1,T1 ;FOR INDEXING
MOVE T2,0(T1) ;LENGTH,,NEXT POINTER
HRLM T2,1(T3) ;STORE BACK IN (F.INZR)+1
HLRZ T2,T2 ;LENGTH
JRST CLRRET ;RETURN SPACE
CLANRS: MOVE T2,0(T1) ;LENGTH,,NEXT POINTER
HRRZM T2,1(T3) ;STORE BACK IN (F.INZR)+1
HLRZ T2,T2 ;LENGTH
JRST CLRRET ;RETURN SPACE
CLANZ: SETZM F.NXZR ;FOR SCAN
SETZM SWFLAG ;CLEAR SWITCH SEEN INDICATOR
CPOPJ: POPJ P, ;RETURN
;HERE FROM SCAN TO PRINT PROMPT CHARACTERS.
;NEED TO SUPPRESS THEM IF PROCESSING ASCII TEXT.
UPRMPT: SKIPE F.ASCI ;PROCESSING ASCII TEXT?
POPJ P, ;YES, JUST RETURN
SKPINL ;DEFEAT ^O SO PROMPT WILL APPEAR
JFCL ;IGNORE POSSIBLE SKIP
SKIPGE T1 ;CONTINUATION LINE?
MOVEI T1,"#" ;YES, CHANGE PROMPT CHARACTER
OUTCHR T1 ;DELIVER IT
POPJ P, ;RETURN TO SCAN
;SUBROUTINES TO ALLOCATE FILE AREAS
;EXITS WITH T1 = ADDRESS
;T2 = LENGTH
;SUBROUTINE TO ALLOCATE OUTPUT FILE AREA
AOUT: ;FALL INTO AIN TO GET SPACE
;SUBROUTINE TO ALLOCATE INPUT FILE AREA
AIN: MOVEI T2,F.LEN ;SET LENGTH
SKIPGE F.NXZR ;SET NEGATIVE IF SWITCHES SEEN
JRST AIN4 ;BLOCK IS ALREADY SETUP
SETZM SWFLAG ;CLEAR GARBAGE IN SWFLAG
SKIPE T1,LOGSUB ;IF WE HAVE A REAL LOG FILE
PUSHJ P,.TYOCH## ;RESET LOG OUTPUT ROUTINE
PUSHJ P,DY.GET## ;GET SOME FREE SPACE
SKIPN LOGSUB ;DID WE RESET TTY OUTPUT
JRST AIN0 ;NO
MOVE T2,T1 ;SAVE T1
MOVE T1,TTYSUB ;GET TTY ROUTINE BACK
PUSHJ P,.TYOCH## ;RESET TTY
MOVE T1,T2 ;RESTORE CORE POINTER
AIN0: SKIPE F.INZR ;FIRST ONE?
JRST AIN1 ;NO
MOVEM T1,F.INZR ;SET FIRST ADDRESS POINTER
JRST AIN2 ;FIXUP SIZE AND ADDRESS FOR SCAN
AIN1: HRRM T1,@F.NXZR ;STORE POINTER TO THIS
AIN2: MOVEM T1,F.NXZR ;ADVANCE TO IT
SETZM (T1) ;CLEAR FORWARD POINTER
SETZM 1(T1) ;AND SWITCH POINTER
AIN3: ADDI T1,F.ZER ;PASS OVER HEADER WORDS
SUBI T2,F.ZER ;SINCE SCAN DOESN'T KNOW ABOUT THEM
POPJ P, ;RETURN
AIN4: HRRZS T1,F.NXZR ;GET CURRENT BLOCK
HRRZS (T1) ;CLEAR DUMMY FILE BLOCK FLAG
SETZM SWFLAG ;CLEAR SWITCH SEEN FLAG
JRST AIN3 ;AND RETURN
SUBTTL HERE TO HANDLE SWITCHES
;HERE FOR GLOBAL SWITCHES (LHS)
;ENTER FROM SCAN WITH VALUE IN P3 AND TOKEN IN T2
;AND DELIMITER CHARACTER IN C=P4
;SPECIAL ACTION IS REQUIRED IF DELIMITER IS ":"
;SINCE SCAN HAS NOT YET RETURNED THE FILE SPEC BLOCK THE FIRST SWITCH
;MUST ALLOCATE A DUMMY BLOCK.
;IT DOES THIS BY CALLING AIN AND MARKS THE BLOCK BY
;-1 IN LEFT OF F.NXZR AND -1 IN LEFT OF @F.NXZR
;THE SWITCHES ARE IN CHAINED BLOCK
;ALL GLOBAL SWITCHES, THOSE BEFORE THE FILE NAME ARE CHAINED TO THE
;LEFT HALF OF (@F.NXZR)+1, AND ALL LOCAL SWITCHES TO THE RIGHT HALF.
;THE SWITCHES ARE IN BLOCKS WHOSE STRUCTURE IS
;WORD COUNT ,, LINK TO NEXT SWITCH
;TOKEN VALUE
;VALUE
;REST DEPENDS UPON TOKEN #
;WHEN THE FILE SPEC IS RETURNED THE LEFT HALVES OF F.NXZR AND @F.NXZR
;ARE CLEARED.
USRSWT: LDB T3,[POINT 6,T2,11] ;GET BYTE SIZE
SUBI T3,^D65 ;CONVERT TO - ARG LEN IF MULTI
MOVN T3,T3 ;MAKE POSITIVE ARG LENGTH
CAIG T3,LN.SWV ;LOOK TOO LONG?
JRST USRSW0 ;NO, IS OK AS IS
MOVEI T3,1 ;YES, IS REALLY 1 WORD OR LESS
SKIPE SCNSYM ;[2220] SCANNING A SYMBOL?
JRST [PUSH P,T3 ;[2220] YES, GET AN AC
PUSHJ P,USRSYM ;[2220] FIX IN CASE LONG SYMBOL
POP P,T3 ;[2220] RESTORE THE AC
JRST USRSW0] ;[2220] CONTINUE
MOVEM N,.NMUL## ;SINGLE WORDS NOT ALWAYS STORED
USRSW0: PUSH P,T3 ;SAVE 1ST SWITCH ARG MAX LEN
HRRZ T2,T2 ;CLEAR BYTE POINTER FROM LEFT
PUSH P,T2 ;AND TOKEN
CAIN T2,%GO% ;IS THIS /G?
SETOM GOTO ;YES, MARK SO WE CAN DELETE TMP FILE
IFN FTOVERLAY,<
CAIN T2,%OV% ;/OVERLAY?
HRROS OVERLW ;YES, MARK SEEN IT
>
HLRZ T2,SWTTAB(T2) ;PICKUP SIZE OF SWITCH BLOCK
SKIPE T1,LOGSUB ;IF A LOG FILE,
PUSHJ P,.TYOCH## ;SET IT TO RECEIVE MESSAGES
PUSHJ P,DY.GET## ;GET THE SWITCH BLOCK
SKIPN LOGSUB ;DID WE RESET TTY OUTPUT?
JRST .+5 ;NO
PUSH P,T1 ;SAVE SWITCH BLOCK ADDR OVER TYOCH
MOVE T1,TTYSUB ;GET TTY ROUTINE BACK
PUSHJ P,.TYOCH## ;TELL SCAN
POP P,T1 ;NOW NEED SWITCH BLOCK ADDR
;FALL THROUGH TO NEXT PAGE
;HERE TO STORE THE FIRST ARG IN OUR SWITCH BLOCK & CHECK FOR A 2ND ARG
HRLZM T2,0(T1) ;STORE SIZE, CLEAR LINK TO NEXT
POP P,1(T1) ;STORE TOKEN # IN BLOCK
MOVX T3,SWT.S1 ;[2220] GET THE SYMBOL FLAG
SKIPE SCNSYM ;[2220] SCANNING A SYMBOL?
IORM T3,1(T1) ;[2220] YES, STORE IT IN SCAN BLOCK
SETZM SCNSYM ;[2220] CLEAR THE SYMBOL FLAG
POP P,T3 ;RESTORE # WORDS IN SWITCH ARG
CAILE T3,-2(T2) ;WILL IT FIT IN OUR BLOCK?
PUSHJ P,E$$IST ;[1174] NO, ERROR IN SWITCH MACRO
SUBI T2,2(T3) ;YES, T2 GETS WORDS LEFT OVER
MOVSI T4,.NMUL## ;NOW TO BLT ARG TO SWITCH BLOCK
HRRI T4,2(T1) ;WILL WORK FINE IF AT LEAST 1 WORD
ADDI T3,2(T1) ;LAST DEST+1
BLT T4,-1(T3) ;COPY ARG
SKIPE T2 ;ANY ROOM FOR 2ND ARG TO SWITCH?
CAIE C,":" ;YES, IS THERE ONE?
JRST USRSW1 ;NO, GET ERROR FROM SCAN IF ":"
MOVE T4,1(T1) ;YES, GET TOKEN BACK
HRRZ T4,SWTTAB(T4) ;GET ADDR OF SCANNER FOR 2ND ARG
JUMPE T4,USRSW1 ;NONE, GET ERROR FROM SCAN
SPUSH <T3,T2,T1> ;SAVE GOOD INFO OVER PROCESSOR
SETZM .NMUL## ;CLEAR ANSWER AREA
MOVE T2,[.NMUL##,,.NMUL##+1] ;[2306] TO AVOID CONFUSION
BLT T2,.NMUE## ;[2306] IF NO VALUE SUPPLIED NEXT TIME
PUSHJ P,0(T4) ;CALL SECOND PROCESSOR, T1 IS ADDR OF BLOCK
SPOP <T1,T2,T3> ;RESTORE ALL GOOD VALUES
SKIPE SCNSYM ;[2220] SCANNING A SYMBOL?
JRST [PUSH P,T3 ;[2220] YES, GET AN AC
MOVX T3,SWT.S2 ;[2220] A SYMBOL FLAG
IORM T3,1(T1) ;[2220] STORE IT IN SCAN BLOCK
PUSHJ P,USRSYM ;[2220] FIX IN CASE LONG SYMBOL
POP P,T3 ;[2220] RESTORE THE AC
SETZM SCNSYM ;[2220] CLEAR THE SYMBOL FLAG
JRST USRSW3] ;[2220] CONTINUE
CAIN T2,1 ;SINGLE WORD ARG?
MOVEM N,.NMUL## ;YES, N NOT ALWAYS STORED
USRSW3: HRLI T3,.NMUL## ;RH T3 ALREADY OK FOR BLT
ADDI T2,0(T3) ;LAST DEST. IS REMAINDER OF BLOCK
BLT T3,-1(T2) ;SO FILL IN REST OF SWITCH BLOCK
USRSW1: SETZM .NMUL## ;AVOID CONFUSION ON NEXT CALL
MOVE T2,[.NMUL##,,.NMUL##+1] ;BY ZEROING THINGS NOW
BLT T2,.NMUE## ; ..
SKIPGE F.NXZR ;IF FIRST SWITCH FOR THIS FILE
JRST USRSW2 ;NO, FILE AREAS ALREADY SET UP
PUSH P,T1 ;SAVE SWITCH BLOCK ADDR
PUSHJ P,AIN ;ALLOCATE A BLOCK
HRROS -F.ZER(T1) ;MARK BLOCK AS A DUMMY ONLY
HRROS F.NXZR ;MARK DUMMY BLOCK SET UP
POP P,T1 ;RESTORE SWITCH BLOCK ADDR
USRSW2: SKIPE F.NAM ;GLOBAL IF FILE NAME NOT YET SEEN
JRST USRLSW ;NO, ITS LOCAL
;FALL THROUGH TO NEXT PAGE
;HERE TO CHAIN GLOBAL SWITCH INTO SCAN BLOCK (OFF OF SWFLAG)
SKIPL T2,SWFLAG ;SEE IF FIRST SWITCH
JRST USRGS2 ;YES IT IS
HRROM T1,SWFLAG ;STORE NEW POINTER
HRRM T1,(T2) ;AND LINK IN
USRRET: POPJ P,
USRGS2: HRROM T1,SWFLAG ;STORE POINTER AND FLAG GLOBAL
MOVE T2,F.NXZR ;GET POINTER TO BLOCK
HRLM T1,1(T2) ;LINK SWITCH CHAIN TO FILE CHAIN
POPJ P,
;HERE FOR LOCAL SWITCHES (RHS)
USRLSW: SKIPG T2,SWFLAG ;SEE IF FIRST SWITCH
JRST USRLS2 ;YES IT IS
HRRZM T1,SWFLAG ;STORE NEW POINTER
HRRM T1,(T2) ;AND LINK IN
POPJ P,
USRLS2: HRRZM T1,SWFLAG ;STORE POINTER AND FLAG LOCAL
MOVE T2,F.NXZR ;GET POINTER TO BLOCK
HRRM T1,1(T2) ;LINK SWITCH CHAIN TO FILE CHAIN
POPJ P,
;[2220] Here if a symbol. Check for long symbol, and if so build
;[2220] a pointer to it and put it in the DY area.
USRSYM: PUSH P,T2 ;[2220] Save an AC
SETZ T2, ;[2220] Clear a counter
USRSM1: SKIPE .NMUL##(T2) ;[2220] This word null?
AOJA T2,USRSM1 ;[2220] No, try another
CAIG T2,1 ;[2220] Short (or no) symbol?
JRST USRSM2 ;[2220] Yes, don't change it
PUSH P,T1 ;[2220] Long symbol, save another AC
PUSHJ P,DY.GET## ;[2220] Get some memory for it
HRL T1,T2 ;[2220] Build length,,pointer
PUSH P,T1 ;[2220] Save it
ADDI T2,-1(T1) ;[2220] Last address to store
HRLI T1,.NMUL## ;[2220] From,,to
BLT T1,(T2) ;[2220] Copy it
POP P,.NMUL## ;[2220] Put the pointer in as the result
POP P,T1 ;[2220] Restore an Ac
USRSM2: POP P,T2 ;[2220] Restore another AC
POPJ P, ;[2220] Return
E$$IST::.ERR. (MS,,V%L,L%F,S%F,IST,<Inconsistency in switch table>) ;[1174]
SUBTTL GENERATE SWITCH TABLES
;GENERATE SWITCH TABLES
DEFINE SWMAC (A,B,C,D,E,F,G,H,I)<
IFB <C>,<
A H'B,TK.,D,E
>
IFNB <C>,<
A H'B,<POINT 65-C,TK.,35>,D,E
>
IF1,<
IFIDN <B><GO>,<
IFNDEF %GO%,<
%GO%==TK.
>>
IFIDN <B><OVERLAY>,<
IFNDEF %OV%,<
%OV%==TK.
>>
TK.==TK.+1
>
IF2,<
IFG .-LNKSWP,<TK.==TK.+1>
>>
TK.==0 ;INITIAL CONDITION
DOSCAN (LNKSW)
DEFINE KEYMAC (A,B)<
KEYS A'K,<B>>
KEYWORDS
SUBTTL GENERATE SIZE TABLE FOR SWITCH STORAGE
DEFINE SWMAC (A,B,C,D,E,F,G,H,I)<
IF1,<
F,,0
>
IF2,<
IFNB <I>,<IFNDEF I,<EXTERN I>>
F,,I
>>
SWTTAB: SWTCHS
SUBTTL CHARACTER INPUT ROUTINES
IFE .ASBLK,<USRIN==0> ;USE INCHWL ROUTINE IN SCAN
IFN .ASBLK,<
USRIN: SKIPE F.ASCI ;READING ASCIZ TEXT FROM CORE?
JRST TXTIN ;YES
INCHWL C ;NO
POPJ P,
TXTIN: AOSE F.ASCI ;IS SCAN RETURNING TOO MUCH?
SOSA F.ASCI ;NO, CONTINUE
JRST TXTKOM ;YES, GO GIVE IT A KOMMAND
SOSGE F.ASCC ;BUFFER STILL CONTAINS DATA?
JRST NXTTXT ;NO, GET NEXT BUFFER
ILDB C,F.ASCI ;READ A CHAR
JUMPN C,CPOPJ ;RETURN IF NOT NULL
SKIPA C,F.ASCC ;NO OF CHAR LEFT
NXTTXT: TDZA C,C ;ENTER HERE WHEN BUFFER EMPTY
IDIVI C,5 ;NO OF WORDS LEFT
SUBI C,^D127 ;NO. TO BACKUP
ADDB C,F.ASCI ;TO START OF BLOCK
PUSHJ P,.PSH4T## ;SCAN USES ALL THE T ACS
HRRZ T1,C ;GIVE BLOCK BACK
MOVEI T2,^D128
MOVE C,(C) ;STORE POINTER TO NEXT BLOCK OR 0
MOVEM C,F.ASCI ;NEW POINTER
PUSHJ P,DY.RET## ;RETURN SPACE
PUSHJ P,.POP4T## ;RESTORE ALL T ACS
JUMPE C,TXTFIN ;FINISHED IF NOTHING TO LINK TO
MOVE C,[POINT 7,1] ;ASCII BYTE POINTER
ADDM C,F.ASCI ;FOR READIN
MOVEI C,^D127*5 ;MAX BYTE COUNT FOR THIS BUFFER
MOVEM C,F.ASCC ;FOR SOSGE LOOP
JRST TXTIN ;GET NEXT CHAR
TXTFIN: SETOB C,F.ASCI ;RETURN EOL CHAR
POPJ P,
E$$ITB::.ERR. (MS,.EC,V%L,L%F,S%F,ITB,<Invalid text in ASCII block from file >) ;[1174]
.ETC. (FSP,,,,,DC)
;STILL IN IFN .ASBLK
;HERE IF SCAN IS RETURNING TOO MUCH. HAND IT THE NEXT CHAR
;OF "/K<CRLF>". IF THAT DOESN'T STOP IT, BOMB WITH ?LNKITB.
TXTKOM: SETOM F.ASCI ;RESET ASCII TEXT IN PROGRESS
SKIPN F.ASCK ;FIRST TIME THROUGH?
JRST [MOVE C,[POINT 7,KOMTXT] ;YES, SET UP BP
MOVEM C,F.ASCK ;FOR USE BELOW
JRST .+1] ;RETURN TO MAIN FLOW
ILDB C,F.ASCK ;NEXT BYTE OF KOMMAND
JUMPE C,E$$ITB ;[1174] IF SCAN STILL WANTS MORE, GIVE UP
POPJ P, ;ELSE RETURN IT THE CHARACTER
;THE NO-OP KOMMAND ITSELF
KOMTXT: ASCIZ ./K
.
>;END IFN .ASBLK
;ROUTINE CALLED TO DO CHARACTER INPUT DURING EDITING OF A FILE
;SPECIFICATION SO THAT NORMAL COMMAND INPUT CAN BE SUSPENDED
;AND RESUMED AFTER THE EDIT. CALLED BY SCAN DURING PUSHJ
;TO .TSCAN TO GET NEXT LINE. ENABLED BY CALL TO .TYPRE
FORCIN: INCHWL C ;GET NEXT CHARACTER
POPJ P, ;RETURN IT TO SCAN
SUBTTL .INSUB - SPECIAL INPUT SUBROUTINES NOT YET IN SCAN
ENTRY .SYMSW,.SWSYM,.SYOSW,.SWSYO,.SXDSW,.SWSXD
ENTRY .DPKSW,.SWDPK
N==P3
C==P4
;.SYMSW -- INPUT A SIXBIT SYMBOL FROM COMMAND STRING
;.SYMSC -- DITTO (CHARACTER ALREADY IN C)
;[2220] Call: PUSHJ P,.SYMSC/.SYMSW
;[2220] RETURN WITH WORDS IN .NMUL
;[2220] Uses T1 Updates C (separator)
;[2220] Sets SCNSYM to indicate that it was a symbol.
;[2220] Uses SCNSYM internally to indicated a quoted string.
;[2220] Allows quoted strings. Quotes are needed for all characters
;[2220] except 0-9, A-Z, $, ., and %.
;[2220] A special requirement of this routine is that if a quoted
;[2220] string is seen it is necessary that one extra character be
;[2323] read. This is because .TIALT returns a space for the second
;[2220] quote.
;[2220] This routine is similar to .SIXQW/.SIXQC in SCAN, except
;[2220] that it allows extra characters and always returns the next
;[2323] character in C, and that it converts lower case characters
;[2323] in quotes to shifted SIXBIT.
.SYMSW::PUSHJ P,.TIALT## ;[2323] Prime the pump
.SYMSC::MOVEI T1,.TSYMB## ;[2334] Use SIXBIT for error printing
MOVEM T1,.LASWD## ;[2220] Remember it
CAIE C,"""" ;[2220] Is this a quote?
SETOM SCNSYM ;[2220] No, remember not quoted string
PUSH P,.NMUL## ;[2334] Save the default
SETZM .NMUL## ;[2334] No characters yet
PUSH P,P1 ;[2323] Get an accumulator
SETZ P1, ;[2323] Remember in upper case mode
PUSHJ P,.TICQT## ;[2220] Check for quoting
MOVE T1,[POINT 6,.NMUL##] ;[2220] Initialize Byte pointer
;[2220] Here for each character
SYMM1: SKIPLE .QUOTE## ;[2220] See if in quoted string
JRST SYMMS ;[2323] Yes, check for case sensitivity
PUSHJ P,.TICAN## ;[2220] See if alphanumeric
CAIN C,"." ;[2220] No, is it a dot?
JRST SYMM2 ;[2220] Yes, it's good
CAIE C,"$" ;[2220] Is it a dollar sign?
CAIN C,"%" ;[2220] Or a percent sign?
JRST SYMM2 ;[2220] Yes, it's good
;[2220] Here when it's not a character to store. Check for special
;[2220] Quoted string problem.
POP P,P1 ;[2323] Restore the flag AC
SKIPE SCNSYM ;[2220] Quoted string?
JRST SYMMD ;[2334] No, already flagged, done
CAIN C," " ;[2220] Returned a space? (could be eol)
PUSHJ P,.TIALT## ;[2323] Yes, get the next character
SETOM SCNSYM ;[2220] Note that a symbol was scanned
SYMMD: POP P,T1 ;[2334] Recover the default
SKIPE .NMUL## ;[2334] Get anything?
POPJ P, ;[2334] Yes, Done
MOVEM T1,.NMUL## ;[2334] No, put back default
SETZM SCNSYM ;[2334] Default is not symbolic
POPJ P, ;[2334] Done
SYMMS: CAIN C," " ;[2323] Spaces in symbols are no good
JRST E.ILSC## ;[2323] Give error if bad character
CAIE C,"/" ;[2323] User cannot type shift characters
CAIN C,"\" ;[2323] Either of them
JRST E.ILSC## ;[2323] Give error if bad character
CAIL C,"A" ;[2323] Is it an upper case alphabetic?
CAILE C,"Z" ;[2323] Between A and Z?
JRST SYMS1 ;[2323] No
JUMPE P1,SYMM2 ;[2323] Yes, done if in upper case mode
MOVEI P1,'/' ;[2323] Get the upper case flag
CAME T1,[POINT 6,.NMUE##,35] ;[2323] See if overflow
IDPB P1,T1 ;[2323] OK, Store
SETZ P1,
JRST SYMM2 ;[2323] Go store the character
SYMS1: CAIL C,"a" ;[2323] Is it a lower case alphabetic?
CAILE C,"z" ;[2323] Between a and z?
JRST SYMM2 ;[2323] Not alphabetic at all, just store
JUMPN P1,SYMM2 ;[2323] Yes, done if in lower case mode
MOVEI P1,'\' ;[2323] Get the lower case flag
CAME T1,[POINT 6,.NMUE##,35] ;[2323] See if overflow
IDPB P1,T1 ;[2323] OK, Store
;[2220] Here with a character to store. Check ranges and store if possible.
SYMM2: PUSHJ P,.TIMUC## ;[2323] Make it upper case
CAIL C,40 ;[2220] See if in range for sixbit
CAILE C,137 ;[2220]
JRST E.ILSC## ;[2220] Not in range, give error
SUBI C," "-' ' ;[2220] Convert to sixbit
CAME T1,[POINT 6,.NMUE##,35] ;[2220] See if overflow
IDPB C,T1 ;[2220] OK, Store
ADDI C," "-' ' ;[2220] Convert back to ascii
PUSHJ P,.TIALT## ;[2220] Get next character
JRST SYMM1 ;[2220] Process it
;[2220] HERE WHEN SWITCH VALUE IS A SIXBIT SYMBOL
.SWSYM::PUSHJ P,.SYMSW ;GET THE WORD
JRST .SWDPB## ;AND STORE IT
;.SYOSW -- INPUT A SIXBIT SYMBOL OR OCTAL WORD FROM COMMAND STRING
;.SYOSC -- DITTO (CHARACTER ALREADY IN C)
;TERMINATES AT FIRST NON-SYMBOL CHARACTER (AFTER FIRST #)
;ASSUMES OCTAL IF FIRST CHAR IS #, OR FIRST 6 CHAR ARE 0-7
;[2220] ASSUMES SYMBOLIC IF ANY OF FIRST CHARACTER ALPHABETIC OR SPECIAL
;CALL: PUSHJ P,.SYOSC/.SYOSW
; RETURN WITH WORD IN N
;USES T1 UPDATES C (SEPARATOR)
.SYOSW::PUSHJ P,.TIALT## ;[2323] Prime the pump
.SYOSC::CAIL C,"0" ;[2220] Digits?
CAILE C,"9" ;[1167] ?
CAIN C,"-" ;[2220] No, minus?
JRST .OCTNC## ;[1167] Octal number
CAIN C,"#" ;[2220] Explicit octal?
JRST .OCTNW## ;[2220] Yes, a number
JRST .SYMSC ;[2220] No, it's a symbol
;[2220] HERE WHEN SWITCH VALUE IS A ONE WORD OR OCTAL WORD
.SWSYO::PUSHJ P,.SYOSW ;GET THE WORD
JRST .SWDPB## ;AND STORE IT
;.SXDSW -- INPUT A SIXBIT SYMBOL OR DECIMAL WORD FROM COMMAND STRING
;.SXDSC -- DITTO (CHARACTER ALREADY IN C)
;TERMINATES AT FIRST NON-SYMBOL CHARACTER (AFTER FIRST #)
;ASSUMES OCTAL IF FIRST CHAR IS #, DECIMAL IF FIRST 6 CHAR ARE 0-9
;[2220] ASSUMES SYMBOLIC IF FIRST CHARACTER ALPHABETIC OR SPECIAL
;CALL: PUSHJ P,.SXDSC/.SXDSW
; RETURN WITH WORD IN N
;USES T1 UPDATES C (SEPARATOR)
.SXDSW::PUSHJ P,.TIALT## ;[2323] Prime the pump
.SXDSC::CAIL C,"0" ;[2220] Digits?
CAILE C,"9" ;[1167] ?
CAIN C,"-" ;[2220] No, minus?
JRST .DECNC## ;[2220] Decimal number
CAIN C,"#" ;[2220] Explicit octal?
JRST .OCTNW## ;[2220] Yes, a number
JRST .SYMSC ;[2220] No, it's a symbol
;HERE WHEN SWITCH VALUE IS A SIXBIT SYMBOL OR DECIMAL WORD
.SWSXD::PUSHJ P,.SXDSW ;GET THE WORD
JRST .SWDPB## ;AND STORE IT
;.DPKSW -- INPUT A DECIMAL PAGE OR CORE SIZE FROM COMMAND STRING
;.DPKSC -- DITTO (CHARACTER ALREADY IN C)
;FORM IS /CORE:NK OR /CORE:LK+HK
;IF IT STARTS WITH #, THEN OCTAL TYPEIN
;TERMINATES AT FIRST NON-DECIMAL CHARACTER
;IF SUFFIX IS P USES PAGE SIZE, IF K USE CORE SIZE
;THROWS AWAY ANY CHARACTERS BEFORE THE LAST 10 OR SO
;CALL: PUSHJ P,.DPKSC/.DPKSW
; RETURNS WITH DOUBLE WORD IN .NMUL, .NMUL+1
;USES T1 UPDATES C (SEPARATOR)
.DPKSW::PUSHJ P,.TIAUC## ;PRIME THE PUMP
.DPKSC::SETZB N,.NMUL## ;CLEAR STORAGE AREA
SETZM .NMUL##+1
DPKIN0: CAIN C,"#" ;SEE IF OCTAL FLAGGED
PJRST .OCTNW## ;YES--GO READ OCTAL FIELD
CAIN C,"-" ;IN CASE NEGATIVE
JRST .DPKSW ;JUST IGNORE SIGN, BUT TEST FOR OCTAL AGAIN
DPKIN1: CAIL C,"0" ;SEE IF DECIMAL
CAILE C,"9" ; ..
PJRST DPKMUL ;NO--AT END, SO HANDLE SUFFIX
IMULI N,^D10 ;YES--MULTIPLY NUMBER
ADDI N,-"0"(C) ;INCORPORATE DIGIT
PUSHJ P,.TIAUC## ;GET NEXT CHARACTER
JRST DPKIN1 ;LOOP BACK FOR MORE
;DPKMUL -- HANDLE P OR K SUFFIX MULTIPLIER
; P FOR #1000, K FOR #2000
;CALL: MOVE N,NUMBER
; PUSHJ P,DPKMUL
; RETURN WITH NUMBER MULTIPLIED BY SUFFIX
;USES T1 (MULTIPLIER--RETURNED) UPDATES C (SEPARATOR)
DPKMUL: MOVEI T1,0 ;INITIALIZE SUFFIX MULTIPLIER
CAIN C,"K" ;K = 2 000
MOVEI T1,^D10
CAIN C,"P" ;P = 1 000
MOVEI T1,^D9
LSH N,(T1) ;APPLY TO NUMBER
JUMPN T1,.TIAUC## ;IF SUFFIX--GET ONE MORE CHARACTER
POPJ P,
;HERE WHEN SWITCH VALUE IS A CORE OR PAGE SIZE
.SWDPK::PUSHJ P,.DPKSW ;GET THE NUMBER
MOVEM N,.NMUL## ;STORE LOW
CAIE C,"+" ;SEE IF ANY MORE
JRST .SWDPB## ;NO, STORE WHAT WE HAVE
PUSHJ P,.TIAUC## ;GET NEXT CHARACTER
PUSHJ P,DPKIN0 ;AND SEE WHAT IT IS
MOVEM N,.NMUL##+1 ;STORE HIGH
JRST .SWDPB## ;AND RETURN
ENTRY .SWVER ;[1122]
;HERE WHEN SWITCH VALUE IS A VERSION NUMBER
.SWVER::PUSHJ P,.VERSW## ;[1122] GET THE WORD
JRST .SWDPB## ;[1122] AND STORE IT
;[2306] Here for second argument for /PVDATA switch. This is special,
;[2306] because the type of argument will depend on the previous
;[2306] keyword. In particular, the NAME keyword should accept the
;[2306] length of and a pointer to an ASCIZ string. The VERSION
;[2306] keyword should accept a symbol, an octal number if # seen,
;[2306] or a version number. The other keywords, START, MEMORY,
;[2306] PROGRAM, CBLOCK and EXPORT should accept a symbol or an
;[2306] octal value.
.SWPDV::PUSHJ P,.PDVSW ;[2306] Get the word
JRST .SWDPB## ;[2306] And store it
.PDVSW: HRRZ T1,2(T1) ;[2306] Get the first argument
CAIN T1,$PDVNAME ;[2306] /PVDATA:NAME?
PJRST .ASCSW ;[2306] Yes, go get ASCIZ name
CAIE T1,$PDVVERSION ;[2306] /PVDATA:VERSION?
PJRST .SYOSW ;[2306] No, get symbol or octal number
; PJRST .SYVSW ;[2306] Yes, get symbol or version
;[2306] Here to get a symbol, a version number, or an octal value
.SYVSW: PUSHJ P,.TIALT## ;[2306] Prime the pump
CAIN C,"#" ;[2306] Explicit octal?
PJRST .OCTNW## ;[2334] Yes
CAIE C,"(" ;[2306] Open parenthesis
CAIN C,"-" ;[2306] Or dash?
PJRST .VERSC## ;[2306] Yes, version number
CAIL C,"0" ;[2306] See if in range
CAILE C,"7" ;[2306] As an octal number
PJRST .SYMSC ;[2306] No, it's a symbol
PJRST .VERSC ;[2306] Yes, it's a version number
;[2306] Here for ASCIZ possibly quoted string. Places result in DY area,
;[2306] returns length,,pointer. Uses SCNSYM as a flag, -1 means parsing
;[2306] a quoted symbol. Always leaves SCNSYM zero. Also uses T1-T3.
.ASCSW: PUSHJ P,.TIALT## ;[2306]
CAIN C,"""" ;[2306] Is this a quote?
SETOM SCNSYM ;[2306] Yes, remember quoted string
PUSHJ P,.TICQT## ;[2312] Check for quoting
HRROI T1,.TSTRG## ;[2312] Set ASCII string format
MOVEM T1,.LASWD ;[2312] For error printing
MOVE T1,[POINT 7,.NMUL##] ;[2312] Initialize byte pointer
ASCS1: SKIPLE .QUOTE## ;[2312] See if in quoted string
JRST ASCS2 ;[2312] Yes, just go store
PUSHJ P,.TICAN## ;[2312] See if alphanumeric
CAIN C,"." ;[2312] No, is it a dot?
JRST ASCS2 ;[2312] Yes, it's good
CAIE C,"$" ;[2312] Is it a dollar sign?
CAIN C,"%" ;[2312] Or a percent sign?
JRST ASCS2 ;[2312] Yes, it's good
;[2312] Have ASCII string, copy it into a block.
SETZ T2, ;[2312] Get trailing null
CAME T1,[POINT 7,.NMUE##,34] ;[2312] See if overflow
IDPB T2,T1 ;[2312] No, store null (must be ASCIZ string)
HRRZ T2,T1 ;[2306] Get the last word written
SUBI T2,.NMUL##-1 ;[2306] Get the size
CAMN T1,[POINT 7,.NMUE##,34] ;[2306] Absolutely full?
ADDI T2,1 ;[2306] Yes, will need one more word
PUSHJ P,DY.GET## ;[2306] Get space for the string
MOVE N,T1 ;[2306] Save the length
HRL N,T2 ;[2306] And the size
ADDI T2,-1(T1) ;[2306] Final destination
HRLI T1,.NMUL## ;[2306] Source,,destination
BLT T1,(T2) ;[2306] Copy the string
SKIPN SCNSYM ;[2312] Doing a quoted string?
POPJ P, ;[2306] No, it's OK
CAIN C," " ;[2306] And returned a space (Could be EOL)?
PUSHJ P,.TIALT## ;[2306] Yes, read one more character
SETZM SCNSYM ;[2306] Zero flag
POPJ P, ;[2306] Done
ASCS2: CAME T1,[POINT 7,.NMUE##,34] ;[2312] See if overflow
IDPB C,T1 ;[2312] No, store
PUSHJ P,.TIALT## ;[2312] Get next character
JRST ASCS1 ;[2312] Loop back to process it
SUBTTL THE END
SCNLIT: END LNKSCN