Trailing-Edge
-
PDP-10 Archives
-
cuspmar86binsrc_2of2_bb-fp63a-sb
-
10,7/makvfu/makvfu.mac
There are 30 other files named makvfu.mac in the archive. Click here to see a list.
SUBTTL
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1976,1977,1984,1986.
;ALL RIGHTS RESERVED.
;
;
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
;ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
;INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
;COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
;OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
;TRANSFERRED.
;
;THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
;AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
;CORPORATION.
;
;DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
;SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
;PROGRAM MAKVFU:
; THIS PROGRAM PRODUCES A BINARY VFU IMAGE FOR LOADING
; INTO AN LP07 LINE PRINTER (DP2550). THE VFU IMAGE DESCRIBES
; A MAXIMUM OF 8 CHANNELS AND 144 LINES. THE USER TYPES IN
; THE SPECIFICATIONS FOR EACH CHANNEL BY DESCRIBING THE LINE
; OR LINES OF THE PAGE ON WHICH THE PRINTER WILL SKIP TO. THE
; USER CAN SPECIFY THE LOGICAL AND PHYSICAL DIMENSIONS OF
; THE PRINTABLE PAGE. THIS PERMITS THE DEFINITION OF A FORMS
; BREAK AREA AS WELL AS VARIABLE LENGTH "PAGES". THE USER
; CAN ALSO SPECIFY THE PRINT DENSITY OF THE LINE
; PRINTER. IE, 6 OR 8 LINES PER INCH.
SEARCH MACROS,MACTEN
DEFTTL (MAKVFU,2,,33,0,P.Wex)
.REQUIRE REL:HELPER.REL
MAKTWO (400000) ;DEFINE TWO SEGMENT PROGRAM
GOHIGH ;START IN HIGH SEGMENT
COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1976,1986. ALL RIGHTS RESERVED.
\;END COPYRIGHT MACRO
;NOTES: (1) THIS PROGRAM CONTAINS VARIABLES AND CODING TECHNIQUES
; THAT ASSUME AN ABSOLUTE CHANNEL MAXIMUM OF 12. THE
; ENTIRE PROGRAM MUST BE THOROUGHLY CHECKED IF A CHANNEL SIZE
; GREATER THAN 12 IS DESIRED.
; (2) THE MAXIMUM NUMBER OF LINES WAS DESIGNED TO BE VARIABLE.
; IE, MAXLIN CAN BE VARIED.
; (3) THE EDIT HISTORY DESCRIBES CHANGES TO THE CODE NOT CONTAINED
; IN THE ORIGINAL CODING SHEETS. HOWEVER, THE
; FLOWCHARTS HAVE BEEN UPDATED TO REFLECT THESE EDITS.
; (4) THE LARGER SUBROUTINES IN THIS PROGRAM USE THE VARIABLES
; AT THE END OF THIS PROGRAM AS INPUT, EVEN THOUGH THEY ARE
; NOT EXPLICITLY CALLED OUT AS INPUTS TO THE
; SUBROUTINES.
; (5) MACRO 50A(425) DOES NOT SUPPORT DEFAULT ARGUMENTS TO MACROS.
; THUS, THE ARGUMENTS ARE CALLED OUT EXPLICITLY.
SUBTTL EDIT HISTORY
;[1] - FIRST RELEASE OF PROGRAM. 6/14/76
;[2] - CHANGED EXIT SUBROUTINE TO EXIT WITHOUT PRINTING THE EXIT
; MESSAGE WHEN NO OUTPUT MESSAGE HAS BEEN EXECUTED. 6/21/76
;[3] - REMOVED "CHANNEL ASSIGNED MESSAGE" FROM INFO. BROKE OUT
; NEW SUBROUTINE CALLED PLINE TO PRINT THE LINES DEFINED FOR
; A CHANNEL. MODIFIED PLINE TO DETECT AND PRINT LINES FOR FORMS
; BREAK CHANNELS. 6/21/76
;[4] - REMOVE MARK COMMAND 6/21/76
;[5] - CHANGED LPI MESSAGE IN INFO. MORE DESCRIPTIVE. CHANGED
; LPI CODE TO ACCEPT 0 ARGUMENT 7/2/76
;[6] - CHANGED LPI MSG AGAIN IN INFO. REFERENCE HARDWARE 7/2/76
;[7] - CHANGED MESSAGE LABELS TO CONFORM TO DEC CONVENTION 7/2/76
;[8] - CHANGED DEFAULT LPI FROM 0 TO 6 7/2/76
;[9] - FIXED C 1[CR] BUG IN CHNL 7/2/76
;[10] - CHANGED LF TESTS TO TERMLF CALLS TO IGNORE SPACES
; AND TABS AT END OF COMMAND 7/2/76
;[11] - CHANGED .PAGE CODE TO REDEFINE LENGTH IF PAGE GT LENGTH
; WARNING ISSUED. 7/6/76
;[12] - CHANGED .LENTH CODE TO REDEFINE PAGE IF LENGTH LT PAGE.
; WARNING ISSUED. 7/6/76
;[13] - CHANGE .INFO CODE TO EQUATE "I SPACE" WITH "I CR"
; 7/6/76
;[14] - ADD ERROR MSG E3 TO .INFO CODE 7/6/76
;[15] - FIX *O [1,2] BUG IN .OUTPT 7/7/76
;[16] - CHANGED SUBROUTINE TYI TO SUPPORT LOWER CASE ALPHABETICS
; 7/7/76
;[17] - CHANGED PLINE TO FIX .INFO BUG WHEN LENGTH=PAGSIZ 7/7/76
;[18] - LP100 H.W. CHANGE - MAXIMUM EXTERNAL LINE NO. (MXLINX) =143.
; NOT 144. THEREFORE, MAX. INTERNAL LINE NO. (MAXLIN) =142.
; 7/15/76
;[19] - LP100 H.W. CHANGE - LINE 1 OF CHANNEL 1 MUST BE SET. CHANGED
; .LINES AND .BOTOM CODE 7/15/76
;[20] - FIXED P 144 BUG. 7/15/76
;[21] - FIXED C 1 L 143 BUG. 7/15/76 -- ALSO ADDED LP05 INFO.
;[22] - LP100 H.W. CHANGE - CHANNEL 12 BOTTOM MUST BE DEFINED FOR
; LP05. THEREFORE, MAXCHL INCREASED TO 12. ALSO, .INIT CODE
; CHANGED TO DEFINE CHANNEL 12 BOTTOM. ALSO, MESSAGES M11,12
; ADDED TO .INFO. 7/15/76
;[23] - INSERTED WARNING MESSAGE IN .LPI TO WARN AGAINST
; ATTEMPTING PROGRAMMABLE CHANGES TO LPI FOR AN LP05. 7/15/76
;[24] - FIXED GETSIX TO ALLOW 0'S IN FILENAME
;[25] - FIXED GETDEC BUG -- 8 WILL BE ERROR FOR GETOCT, NET TERMINATOR CHAR.
;[26] - CORRECTED ERROR MSGS TO CORRESPOND TO MANUAL
;[27] - FIXED INFO TO ALWAYS OUTPUT LP05, LP07 MESSAGE
;[30] - PMW - ADD ZERO COMMAND TO CLEAR A CHANNEL
; AND NEW TO CLEAR ENTIRE VFU
; THESE ARE TO FACILITATE NON-STANDARD VFU'S
;[31] - PMW - SUPPRESS LP05 WARNING IN LPI 6; 9 MAR 1977
;[32] - PMW - Add TYPE command
; LP05 LPI illegal, Set Channel 12 Bot
; LP07
; OTHER
;VERSION 2
;[33] - DBD - ADD LP14 TYPE. SAME AS LP05.
SUBTTL MAKVFU MAINLINE PROGRAM MODULE
MAKVFU:
START: RESET ;INIT THE WORLD
MOVE P,[IOWD 50,STK] ;INIT STACK
PUSHJ P,INIT ;INITIALIZE ALL VARIABLES
S5: OUTSTR ASTER ;OUTPUT PROMPT CHARACTER
PUSHJ P,GETSIX ;READ A KEYWORD
JRST S5 ;IGNORE NULL INPUT
SETOM T1 ;INIT KEYWORD MASK
LDB T2,[POINT 6,P3,5] ;LOAD P FIELD OF BYTE POINTER FROM
;GETSIX. P FIELD CONTAINS COUNT OF
;UNUSED BITS IN KEYWORD.
LSH T1,0(T2) ;CLEAR BITS IN MASK CORRESPONDING TO
;UNUSED CHARACTERS IN KEYWORD.
MOVEI T2,NCOMS-1 ;SETUP TABLE LENGTH-1 AS LOOP COUNTER
SETOM T4 ;INIT COMMAND LOCATION
;
;THE FOLLOWING LOOP (S10-S20) READS EACH ENTRY IN THE COMMAND TABLE
;ONCE, CLEARS CHARACTERS NOT SPECIFIED IN THE KEYWORD,
;AND COMPARES THE KEYWORD TO THE MASKED COMMAND. IF A MATCH IS FOUND,
;T4 IS SET TO THE POINTER TO THE COMMAND IN THE COMMAND TABLE( IE,
;A POSITIVE NUMBER). IF A SECOND MATCH IS FOUND, T4 IS NO LONGER
;NEGATIVE, AND THEREFORE THE KEYWORD IS DEFINED TO BE
;AMBIGUOUS. IE, L COULD BE EITHER LENGTH OR LPI.
;
S10: MOVE T3,COMTAB(T2) ;READ NEXT COMMAND FROM CMD TABLE
AND T3,T1 ;CLEAR CHARS NOT SPECIFIED IN KEYWORD
CAME T3,P2 ;TEST-DOES KEYWORD MATCH MASKED CMD?
JRST S20 ;NO-EXAMINE NEXT COMMAND
JUMPGE T4,S30 ;TEST-AMBIGUOUS COMMAND? JUMP=YES
HRRZ T4,T2 ;NO-SAVE TABLE PTR TO CMD
S20: SOJGE T2,S10 ;TEST-END OF TABLE? JUMP=NO
JUMPL T4,S40 ;TEST-ANY MATCH FOUND? JUMP=NO
MOVE T1,COMDIS(T4) ;PICK UP CMD DISPATCH TABLE ADDR
PUSHJ P,0(T1) ;CALL COMMAND SUBROUTINE
JRST S50
S30: OUTSTR E9 ;ERROR-AMBIGUOUS COMMAND
JRST S50
S40: OUTSTR E10 ;ERROR-ILLEGAL COMMAND
S50: CAIE P1,12 ;TEST-TERMINATOR=LF?
CLRBFI ;CLEAR INPUT BUFFER
JRST S5
SUBTTL COMMAND AND COMMAND DISPATCH TABLES
DEFINE C(A,B)
<
SIXBIT \A\
>
DEFINE COMS
<
C (CHANNE,.CHNL) ;CHANNEL COMMAND
C (EXIT,.EXIT) ;EXIT COMMAND
C (FORMS,.FORM) ;FORMS BREAK COMMAND
C (HELP,.HELP) ;HELP COMMAND
C (INFORM,.INFO) ;INFORMATION COMMAND
C (LENGTH,.LENTH) ;LENGTH COMMAND
C (LPI,.LPI) ;LINES PER INCH COMMAND
;[4] REMOVED MARK COMMAND
C (NEW,.NEW) ;[30] CLEAR ALL CHANNELS
C (OUTPUT,.OUTPT) ;OUTPUT COMMAND
C (PAGE,.PAGE) ;PAGE COMMAND
C (TYPE,.TYPE) ;[32] TYPE COMMAND
C (ZERO,.ZERO) ;[30] CLEAR A CHANNEL
>
COMTAB: COMS ;CREATE COMMAND TABLE
NCOMS==.-COMTAB ;COMPUTE TABLE LENGTH
DEFINE SCOMS
<
C (ALL,.ALL) ;ALL SUBCOMMAND
C (BOTTOM,.BOTOM) ;BOTTOM SUBCOMMAND
C (EVERY,.EVRY) ;EVERY SUBCOMMAND
C (LINES,.LINES) ;LINES SUBCOMMAND
C (TOP,.TOP) ;TOP SUBCOMMAND
>
SCOMTB: SCOMS ;CREATE SUBCOMMAND TABLE
NSCOMS==.-SCOMTB ;COMPUTE TABLE LENGTH
DEFINE C(A,B) ;REDIFINE C TO CREATE DISPATCH TABLES
<
EXP B
>
COMDIS: COMS ;CREATE CMD DISPATCH TABLE
SCOMDS: SCOMS ;CREATE SUBCMD DISPATCH TABLE
SUBTTL CHANNEL COMMAND PROCESSING
;SUBROUTINE .CHNL:
; PROCESS MAKVFU CHANNEL COMMAND.STORE CHANNEL NUMBER
; IN CHANEL. CALL APPROPRIATE SUBCOMMAND ROUTINE.
;CALLING SEQUENCE:
; PUSHJ P,.CHNL
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; WHERE T1=18-BIT DISPATCH ADDRESS FOUND IN CMD TABLE
;INPUT: P1 = ASCII TERMINATOR CHAR FROM GETSIX IN MAINLINE
; DECIMAL TTY INPUT SPECIFYING CHANNEL NUMBER
; ALPHANUMERIC TTY KEYWORD SPECIFYING CHANNEL SUBCOMMAND
; PLUS OPTIONAL DECIMAL INPUT DEPENDING ON SUBCOMMAND.
;OUTPUT: OUTPUT OF SUBCOMMAND SUBROUTINES
; CHNMSK BIT SET FOR CHANNEL SUCCESSFULLY PROCESSED
; IDENTIFIED ERRORS E4,7,9
; P1 = ASCII TERMINATOR CHAR FOR ENTIRE LINE
;AC'S USED: T1,T2,T3,T4,P1,P2,P3
.CHNL: CAIN P1,12 ;TEST-TERMINATOR=LF?
JRST C50 ;YES-ERROR
PUSHJ P,GETDEC ;READ THE CHANNEL NUMBER
JRST C50 ;NULL OR INVALID RETURN
CAIN P1,12 ;[9] TEST- TERM = LF?
JRST C40 ;[9] YES - ERROR
JUMPLE P2,C50 ;TEST-CHANNEL GT 0? JUMP = NO
CAILE P2,MAXCHL ;TEST-CHANNEL LE MAX CHANNEL?
JRST C50 ;NO-PRINT ERROR
MOVEM P2,CHANEL ;SAVE CHANNEL NUMBER
PUSHJ P,GETSIX ;READ SUBCOMMAND
JRST C40 ;NULL OR INVALID RETURN
SETOM T1 ;INIT KEYWORD MASK
LDB T2,[POINT 6,P3,5] ;LOAD P-FIELD OF BYTE POINTER FROM
;GETSIX. P-FIELD CONTAINS COUNT OF
;UNUSED BITS IN KEYWORD.
LSH T1,0(T2) ;CLEAR BITS IN MASK CORRESPONDING TO
;UNUSED CHARS IN KEYWORD.
MOVEI T2,NSCOMS-1 ;SETUP TABLE LENGTH -1 AS LOOP COUNTER
SETOM T4 ;INIT SUB-COMMAND LOCATION
C10: MOVE T3,SCOMTB(T2) ;READ NEXT CMD FROM SUBCMD TABLE
AND T3,T1 ;CLEAR CHARS NOT SPECIFIED IN KEYWORD
CAME T3,P2 ;TEST- DOES KEYWORD MATCH MASKED CMD?
JRST C20 ;NO-EXAMINE NEXT COMMAND
JUMPGE T4,C30 ;TEST-AMBIGUOUS COMMAND? JUMP = YES
HRRZ T4,T2 ;NO-SAVE TABLE PTR TO CMD
C20: SOJGE T2,C10 ;TEST-END OF TABLE? JUMP=NO
JUMPL T4,C40 ;TEST-ANY MATCH FOUND? JUMP=NO
MOVE T1,SCOMDS(T4) ;PICKUP SUBCMD DISPATCH TABLE ADDRESS
PUSHJ P,0(T1) ;CALL SUBCOMMAND ROUTINE
JRST C60 ;ERROR-DON'T SET CHANNEL MASK BIT
MOVEI T2,1 ;SET BIT IN CHANNEL MASK WORD CORRES-
MOVE T3,CHANEL ; PONDING TO APPROPRIATE CHANNEL
LSH T2,0(T3)
IORM T2,CHNMSK
JRST C60
C30: OUTSTR E9 ;ERROR - AMBIGUOUS COMMAND
JRST C60
C40: OUTSTR E4 ;ERROR - ILLEGAL CHANNEL SUBCOMMAND
JRST C60
C50: OUTSTR E7 ;ERROR - ILLEGAL CHANNEL ARGUMENT
C60: POPJ P, ;RETURN
SUBTTL EXIT COMMAND PROCESSING
;SUBROUTINE .EXIT:
; PROCESS MAKVFU EXIT COMMAND. CAN BE RE-ENTERED VIA
; CONT W/O DESTROYING DATA.
;CALLING SEQUENCE:
; PUSHJ P,.EXIT
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; WHERE T1 = 18-BIT DISPATCH ADDR FOUND IN CMD TABLE
;INPUT: P1 = ASCII TERMINATOR CHAR FROM GETSIX IN MAINLINE
;OUTPUT: RETURN TO MONITOR MODE. PROGRAM CAN BE CONTINUED WITH
; CONT
; IDENTIFIED ERRORS E3,14,14A
; OUTPUTS "EXIT" ON TTY
;AC'S USED: P1
;AC'S SAVED: P1
.EXIT: PUSHJ P,TERMLF ;[10] TEST-TERMINATOR=LF?
JRST EX10 ;NO-ERROR
SKIPE OFLAG ;TEST-ANY OUTPUT DONE TO DISK?
JRST EX5 ;YES-EXIT
OUTSTR CRLF
OUTSTR E14 ;NO-ISSUE WARNING
OUTSTR E14A
JRST EX7 ;[2] - EXIT W/O EXIT MSG
EX5: OUTSTR CRLF
OUTSTR M3 ;OUTPUT EXIT MSG
EX7: EXIT 1, ;EXIT W/ CONTINUE OPTION
JRST EX20 ;RETURN ON CONTINUE
EX10: OUTSTR E3 ;ERROR-GARBAGE AT EOC
EX20: POPJ P, ;RETURN
SUBTTL FORM COMMAND PROCESSING
;SUBROUTINE .FORM:
; PROCESS MAKVFU FORM COMMAND. STORE RESULT IN FORMS.
;CALLING SEQUENCE:
; PUSHJ P,.FORM
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; WHERE T1= 18-BIT DISPATCH ADDRESS FOUND IN CMD TABLE
;INPUT: P1 = ASCII TERMINATOR CHAR FROM GETSIX IN MAINLINE
; DECIMAL INPUT FROM TTY (OPTIONAL) SPECIFYING FORMS
; BREAK CHANNEL.
;OUTPUT: FORMS LOCATION CLEARED FOR NO TTY INPUT.
; BIT SET IN FORMS CORRESPONDING TO CHANNEL INPUT FOR
; VALID DECIMAL INPUT.
; P1 = ASCII TERMAINATOR CHAR FOR ENTIRE LINE
; IDENTIFIED ERRORS E3,7
;AC'S USED: P1,P2,T1
.FORM: CAIN P1,12 ;TEST-TERMINATOR =LF?
JRST F60 ;YES-CLEAR FORMS PARAMETER
PUSHJ P,GETDEC ;READ CHANNEL NUMBER
JRST F50 ;NULL OR ILLEGAL INPUT
PUSHJ P,TERMLF ;[10] TEST-TERMINATOR = LF?
JRST F100 ;NO-PRINT ERROR
JUMPLE P2,F90 ;TEST-CHANNEL GT 0? JUMP=NO
CAILE P2,MAXCHL ;TEST-CHANNEL LE MAX CHANNEL NO.?
JRST F90 ;NO-PRINT ERROR
MOVEI T1,1 ;SET BIT IN FORMS CHANNEL
LSH T1,0(P2) ; WORD CORRESPONDING TO
IORM T1,FORMS ; CHANNEL NUMBER.
JRST F110
F50: CAIE P1,12 ;TEST-TERMINATOR=LF?
JRST F90 ;NO-PRINT ERROR
F60: SETZM FORMS ;CLEAR FORMS CHANNEL WORD
OUTSTR M1 ;OUTPUT FORMS CLEARED MSG
JRST F110
F90: OUTSTR E7 ;ERROR-PRINT ILLEGAL CHANNEL ARGUMENT
JRST F110
F100: OUTSTR E3 ;ERROR-PRINT GARBAGE AT EOC
F110: POPJ P, ;RETURN
SUBTTL HELP COMMAND PROCESSING
;SUBROUTINE .HELP:
; PROCESS MAKVFU HELP COMMAND. PROGRAM SETS UP A
; CALL TO HELPER ON SYS: TO PRINT OUT THE HLP:
; FILE FOUND ON [2,5]
;CALLING SEQUENCE:
; PUSHJ P,.HELP
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; WHERE T1= 18 BIT DISPATCH ADDR FOUND IN CMD TABLE
;INPUT: P1 = ASCII TERMINATOR CHAR FROM GETSIX IN MAINLINE
;OUTPUT: HLP:MAKVFU.HLP PRINTED ON TTY
;AC'S USED: CX,P1
;AC'S SAVED: P1
.HELP: PUSHJ P,TERMLF ;[10] TEST-TERMINATOR=LF?
JRST H10 ;NO-ERROR
MOVEI CX,[[SIXBIT/MAKVFU/]] ;SETUP ARG PTR
PJRST HELPER## ;CALL HELPER WHICH DOES A
;POPJ ON COMPLETION
H10: OUTSTR E3 ;ERROR-GARBAGE AT EOC
POPJ P, ;RETURN
SUBTTL INFORMATION COMMAND PROCESSING
;SUBROUTINE .INFO:
; PROCESS MAKVFU INFORMATION COMMAND. PRINTS OUT THE
; CURRENT PARAMETERS DEFINED FOR THE VFU. IT ACCEPTS
; A CHANNEL ARGUMENT THAT SPECIFIES THE LINES DEFINED FOR
; THE CHANNEL.
;CALLING SEQUENCE:
; PUSHJ P,.INFO
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; WHERE T1=18 BIT DISPATCH ADDR FOUND IN CMD TABLE
;INPUT: OPTIONAL CHANNEL ARGUMENT FROM TTY
; P1= ASCII TERMINATOR CHAR FROM GETSIX IN MAINLINE
;OUTPUT: LENGTH,PAGE SIZE, CHANNELS MARKED,
; AND FORMS BREAK CHANNELS FOR THE VFU.
; OUTPUT FOR OPTIONAL CHANNEL ARGUMENT IS LISTING OF THE
; LINES DEFINED FOR THE CHANNEL.
; P1 = ASCII TERMINATOR CHAR FOR ENTIRE LINE
; IDENTIFIED ERROR E7
;AC'S USED: P1,P2,T1
;AC'S SAVED: P1 IF NO CHANNEL ARGUMENT IS GIVEN AS INPUT
.INFO: CAIE P1,12 ;TEST-TERMINATOR=LF?
JRST I30 ;NO-CHECK FOR CHANNEL ARG
I5: OUTSTR M4 ;[13] OUTPUT LENGTH MSG
MOVE T1,LINPPG ;LOAD LENGTH ARG FOR PDECI
PUSHJ P,PDECI ;PRINT LENGTH ON TTY
OUTSTR CRLF ;TERMINATE LINE
OUTSTR M5 ;OUTPUT PAGESIZE MSG
MOVE T1,PAGSIZ ;LOAD PAGSIZ ARG FOR PDECI
PUSHJ P,PDECI ;PRINT PAGE SIZE ON TTY
OUTSTR CRLF ;TERMINATE LINE
;[3] REMOVED CHANNEL ASSIGNED INFO
;[4] REMOVED MARK INFO
SKIPN Q1,FORMS ;TEST-ANY FORMS BREAK CHANNELS?
JRST I10 ;[5] NO SKIP TO LPI CHECK
OUTSTR M8 ;OUTPUT "FORMS BREAK CHANNELS"
PUSHJ P,NUMS ;OUTPUT FORMS BREAK CHANNELS NUMBERS
I10: SKIPN LPI ;[5] TEST-LPI = 0? SKIP=NO
JRST I20 ;[5] YES
OUTSTR M10 ;OUTPUT LPI MSG
MOVE T1,LPI ;LOAD LPI ARG FOR PDECI
PUSHJ P,PDECI ;PRINT LPI ON TTY
JRST I70 ;[5] END OF COMMAND
I20: OUTSTR M6 ;[5] PRINT PREVIOUS LPI MSG
JRST I70 ;END OF COMMAND
I30: PUSHJ P,GETDEC ;READ OPTIONAL CHANNEL NUMBER
JRST I50 ;[13] NULL OR ILLEGAL ARG
PUSHJ P,TERMLF ;[10] TEST-TERMINATOR =LF?
JRST I65 ;NO-ERROR-GARBAGE AT EOC
JUMPLE P2,I60 ;TEST-CHANNEL GT 0? JUMP=NO
CAILE P2,MAXCHL ;[22] TEST-CHANNEL LE MAX. CHANNEL NO.?
JRST I60 ;NO-ERROR
PUSHJ P,PLINE ;[3] - PRINT LINES DEFINED FOR CHANNEL
OUTSTR CRLF ;TERMINATE LINE
JRST I70
I50: CAIN P1,12 ;[13] TEST - TERMINATOR=LF?
JRST I5 ;[13] YES-PROCESS AS IF "I CR"
I60: OUTSTR E7 ;ERROR-ILLEGAL ARG
JRST I70 ;[14]
I65: OUTSTR E3 ;[14] ERROR - GARBAGE AT EOC
I70: OUTSTR CRLF
OUTSTR M11 ;[22,27] OUTPUT LP05,7 CHANNEL MESSAGE
OUTSTR M12 ;[22,27]
POPJ P, ;RETURN
SUBTTL LENGTH COMMAND PROCESSING
;SUBROUTINE .LENTH:
; PROCESS MAKVFU LENGTH COMMAND. STORE RESULT IN
; LINPPG
;CALLING SEQUENCE:
; PUSHJ P,.LENTH
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; WHERE T1=18 BIT DISPATCH ADDRESS FOUND IN CMD TABLE.
;INPUT: DECIMAL TTY INPUT SPECIFYING LENGTH PARAMETER
; P1 = ASCII TERMINATOR CHAR FROM GETSIX IN MAINLINE
;OUTPUT: DECIMAL INPUT IN LINPPG IF VALID
; P1 = ASCII TERMINATOR CHAR FOR ENTIRE LINE
; IDENTIFIED ERRORS E3,5
;AC'S USED: P1,P2
.LENTH: CAIN P1,12 ;TEST-TERMINATOR=LF?
JRST LE20 ;YES-ERROR
PUSHJ P,GETDEC ;READ LENGTH VALUE FROM TTY
JRST LE20 ;INVALID OR NULL RETURN
PUSHJ P,TERMLF ;[10] TEST-TERMINATOR=LF?
JRST LE35 ;NO-PRINT GARBAGE MESSAGE
CAILE P2,MXLINX ;[18] TEST-INPUT LE MAX. EXT.LINE NO.?
JRST LE20 ;NO-PRINT ERROR
CAML P2,PAGSIZ ;[12] TEST-INPUT LT PAGSIZ?
JRST LE10 ;[12] NO-SKIP PAGSIZ REDEFINITION
MOVEM P2,PAGSIZ ;[12] YES-REDEFINE PAGSIZ
OUTSTR E6 ;[12] OUTPUT WARNING
OUTSTR M2 ;[12] OUTPUT CHANNEL REDEFINE MSG
LE10: MOVEM P2,LINPPG ;[12] SAVE LENGTH
JRST LE40
LE20: OUTSTR E5 ;ERROR-ILLEGAL LENGTH ARGUMENT
JRST LE40
LE35: OUTSTR E3 ;ERROR-GARBAGE AT EOC
LE40: POPJ P, ;RETURN
SUBTTL LINES PER INCH COMMAND PROCESSING
;SUBROUTINE .LPI:
; PROCESS MAKVFU LPI COMMAND. STORE RESULT IN LPI.
;CALLING SEQUENCE:
; PUSHJ P,.LPI
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; WHERE T1=18 BIT DISPATCH ADDR FOUND IN CMD TABLE
;INPUT: DECIMAL TTY INPUT SPECIFYING LPI PARAMETER.
; P1 = ASCII TERMINATOR CHAR FROM GETSIX IN MAINLINE
;OUTPUT: DECIMAL INPUT IN LPI IF VALID
; P1 = ASCII TERMINATOR CHAR FOR ENTIRE LINE
; IDENTIFIED ERRORS E3,15
;AC'S USED: P1,P2
.LPI: MOVE P2,TYPENO ;GET THIS TYPE
CAIN P2,5 ;LP05?
JRST LP05 ;YES, LPI IS ILLEGAL
CAIN P1,12 ;TEST-TERMINATOR =LF?
JRST LP20 ;YES-ERROR
PUSHJ P,GETDEC ;READ LPI VALUE FROM TTY
JRST LP20 ;NULL OR INVALID
PUSHJ P,TERMLF ;[10] TEST-TERMINATOR=LF?
JRST LP30 ;NO-ERROR
JUMPE P2,LP10 ;[5] MAKE LPI ACCEPT 0 ARGUMENT
;[5] TEST-LPI = 0? JUMP=YES
CAIN P2,^D6 ;TEST-LPI=6?
JRST LP10 ;[23] YES - [31] BUT NO WARNING
CAIE P2,^D8 ;TEST-LPI=8?
JRST LP20 ;NO-ERROR
LP10: MOVEM P2,LPI ;SAVE LPI ARG
JRST LP40
LP20: OUTSTR E15 ;ERROR-ILLEGAL LPI ARG
JRST LP40
LP30: OUTSTR E3 ;ERROR-GARBAGE AT EOC
LP40: POPJ P, ;RETURN
LP05: OUTSTR M13 ;[32] OUTPUT LP05 WARNING
POPJ P, ;RETURN
SUBTTL NEW COMMAND PROCESSING
;SUBROUTINE .NEW:
; PROCESS MAKVFU NEW COMMAND, CLEAR ENTIRE CHNBUF BY
; CALLING CLRVFU FOR EACH CHANNEL
;CALLING SEQUENCE;
; PUSHJ P,.NEW
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; WHERE T1= 18-BIT DISPATCH ADDRESS FOUND IN CMD TABLE
;INPUT: P1 = ASCII TERMINATOR CHAR FROM GETSIX IN MAINLINE
;OUTPUT: ALL OF CHNBUF = 0
; IDENTIFIED ERRORS E3
;AC'S USED: T1
.NEW: PUSHJ P,TERMLF ;[30] TEST-TERMINATOR=LF?
JRST NE20 ;NO-GARBAGE EOL ERROR
SETZM FORMS ;MAKE SURE FORMS CLEARED TOO
MOVEI T1,MAXCHL ;GET HIGHEST CHANNEL #
MOVEM T1,CHANEL ;PUT INTO CHANEL FOR CLRVFU
NE10: PUSHJ P,CLRVFU ;CLEAR ALL MARKS IN CHANEL (CHANNEL-1)
SOSLE CHANEL ;DONE?
JRST NE10 ;NOT YET
POPJ P, ;YES, RETURN
NE20: OUTSTR E3 ;ERROR - GARBAGE AT EOC
POPJ P, ;RETURN
SUBTTL OUTPUT COMMAND PROCESSING
;SUBROUTINE OUTPUT:
; PROCESS MAKVFU OUTPUT COMMADN. ACCEPTS FILE
; SPECIFICATIONS AND WRITES OUT A VFU BINARY IMAGE
; INTO THE FILE SPECIFIED.
; FORMAT = DSK:FILNAM.EXT[P,PN]
; DEFAULT =DSK:NORMAL.VFU[0,0]
; WARNING: SPACES AND TABS ARE NOT ALLOWED AS PART OF THE
; FILE SPEC
;CALLING SEQUENCE:
; PUSHJ P,.OUTPT
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; WHERE T1=18 BIT DISPATCH ADDR FOUND IN CMD TABLE
;INPUT: FILE SPECIFICATION FROM TTY
; P1 = ASCII TERMINATOR CHAR FROM GETSIX IN MAINLINE
;OUTPUT: VFU BINARY IMAGE IN FILE SPECIFIED.
; IDENTIFIED ERRORS 16
; P1 = ASCII TERMINATOR CHAR FOR ENTIRE LINE
;AC'S USED: P1,P2,P3,T1,T2,Q1,Q3
.OUTPT:
;READ FILE SPECIFICATION FROM TTY
PUSHJ P,DFAULT ;DEFINE FILE SPEC DEFAULTS
CAIN P1,12 ;TEST-TERMINATOR=LF?
JRST U7 ;YES-USE DEFAULT FILE SPEC
PUSHJ P,GTFLNM ;READ FILE SPEC
JRST U120 ;ERROR-EXIT
;PROCESS FORMS BREAK CHANNELS
U7: SKIPN T1,FORMS ;TEST-FORMS BREAK CHANNEL SET?
JRST U30 ;NO-SKIP FORMS PROCESSING
PUSH P,FORMS ;SAVE FORMS WORD
U10: JFFO T1,.+1 ;PUT COUNT OF LEADING ZEROS IN T2
SUBI T2,^D35 ;NEGATIVE CH. NO. = T2-35
MOVN T2,T2 ;NEGATE FOR POSITIVE RESULT
MOVEM T2,CHANEL ;DEFINE CHANNEL FOR SETBIT
MOVEI T1,1 ;GET 1B35
LSH T1,0(T2) ;SHIFT LEFT BY CHANNEL NO.
ANDCAM T1,FORMS ;TURN OFF BIT IN FORMS FOR CHANNEL
MOVE T1,PAGSIZ ;INIT INTERNAL LINE N0.= PAGE SIZE
U20: PUSHJ P,SETBIT ;SET BIT FOR FORMS BREAK LINE
AOS T1 ;INC LINE COUNT
CAMGE T1,LINPPG ;TEST-END OF CHANNEL?
JRST U20 ;NO
SKIPE T1,FORMS ;TEST-MORE FORMS BREAK CHANNELS?
JRST U10 ;YES-COMPUTE NEXT FORMS CHANNEL
POP P,FORMS ;NO-RESTORE FORMS
;DETERMINE START CODE AND STORE IN EXTERNAL VFU AREA
U30: SETZ Q1, ;INIT LINE NO. FOR BLDVFU
MOVE Q3,VLOADP ;INIT BYTE PTR FOR VFU LOAD
SKIPN T1,LPI ;TEST-LPI SET TO 6 OR 8?
JRST U37 ;NO-START W/ PREVIOUS LPI SETTING
CAIE T1,6 ;TEST-LPI=6?
JRST U35 ;NO
MOVEI T1,START6 ;YES-SPECIFY 6 LPI START CODE
JRST U40
U35: MOVEI T1,START8 ;SPECIFY 8 LPI START CODE
JRST U40
U37: MOVEI T1,STRT ;USE PREVIOUS LPI SETTING
U40: IDPB T1,Q3 ;STORE START CODE IN EXTERNAL VFU AREA
;CONVERT INTERNAL VFU DATA TO EXTERNAL VFU DATA FORMAT
U50: PUSHJ P,BLDVFU ;BUILD WORD OF CHANNEL BITS FOR LINE
LSHC P2,-6 ;SPLIT WORD INTO 2 BYTES(RT JUSTIFIED)
LSH P3,-^D30 ; P3=CH1-6,P2=CH7-8
IDPB P3,Q3 ;STORE FIRST BYTE IN EXTERNAL VFU AREA
IDPB P2,Q3 ;STORE 2ND BYTE IN EXTERNAL VFU AREA
AOS Q1 ;INCREMENT LINE COUNT
CAMGE Q1,LINPPG ;TEST-LINE COUNT EXCEED LENGTH?
JRST U50 ;NO-BUILD ANOTHER LINE
MOVEI T1,STOP ;YES-PUT STOP BYTE IN EXTERNAL VFU AREA
IDPB T1,Q3
;OPEN FILE AND OUTPUT EXTERNAL VFU DATA TO FILE STRUCTURE
OPEN CH1,OPNBLK ;CONNECT SOFTWARE CHANNEL 1
JRST U110 ;ERROR
ENTER CH1,ENTBLK ;DEFINE FILE SPEC
JRST U110 ;ERROR
OUTBUF CH1, ;SET DEFAULT RING BUFFER SIZE
OUTPUT CH1, ;DUMMY OUT TO SETUP 7 BIT BYTE POINTER
MOVE Q3,VLOADP ;SETUP BYTE POINTER TO VFUBUF
U60: ILDB Q1,Q3 ;LOAD BYTE FOR OUTPUT
PUSHJ P,IOSUB ;OUTPUT BYTE
JRST U110 ;ERROR
CAIE Q1,STOP ;TEST-STOP BYTE OUTPUT?
JRST U60 ;NO-CONTINUE OUTPUTTING
;ASSUMPTION: EACH LINE OF DATA IN VFUBUF IS DESCRIBED BY 2 8-BIT
; BYTES. ALSO, EACH SET OF VFUBUF DATA CONTAINS ONE START
; AND ONE STOP CODE. THUS, THE COUNT OF 8 BIT BYTES IN
; VFUBUF IS ALWAYS EVEN, REGARDLESS OF THE NUMBER OF
; LINES ALLOWED. THEREFORE, A CHECK FOR EVEN NO. OF BYTES,
; AS REQUIRED BY THE LP100 CONTROLLER, IS NOT
; NECESSARY. THIS PROGRAM IS NOT CAPABLE OF SENDING
; AN ODD COUNT OF BYTES. THE 8 BIT BYTES IN VFUBUF GET
; CONVERTED TO 7 BIT BYTES IN IOSUB, BUT THE BYTE COUNT
; IS UNCHANGED.
SETOM OFLAG ;SET OUTPUT FLAG FOR EXIT
RELEAS CH1, ;RELEASE CHANNEL, OUTPUT BUFFER
JRST U120
U110: OUTSTR E16 ;ERROR-OUTPUT FILE ERROR
U120: POPJ P, ;RETURN
SUBTTL PAGE COMMAND PROCESSING
;SUBROUTINE .PAGE:
; PROCESS MAKVFU PAGE COMMAND. STORE RESULT IN PAGSIZ.
;CALLING SEQUENCE:
; PUSHJ P,.PAGE
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; WHERE T1=18 BIT DISPATCH ADDRESS FOUND IN CMD TABLE
;INPUT: DECIMAL TTY INPUT SPECIFYING PAGE SIZE PARAMETER
; P1 = ASCII TERMINATOR CHAR FROM GETSIX IN MAINLINE
;OUTPUT: DECIMAL INPUT IN PAGSIZ IF VALID
; P1 = ASCII TERMINATOR CHAR FOR ENTIRE LINE
; IDENTIFIED ERRORS E3,8
;AC'S USED: P1,P2
.PAGE: CAIN P1,12 ;TEST-TERMINATOR = LF?
JRST PA10 ;YES-ERROR
PUSHJ P,GETDEC ;READ A DECIMAL VALUE FROM TTY
JRST PA10 ;NULL OR INVALID RETURN
PUSHJ P,TERMLF ;[10] TEST-TERMINATOR = LF?
JRST PA20 ;NO-PRINT ERROR
JUMPLE P2,PA10 ;TEST-VALUE GT 0? JUMP=NO
CAMG P2,LINPPG ;[11] TEST-VALUE GT LENGTH?
JRST PA5 ;[11] NO-SKIP LENGTH REDEFINITION
CAILE P2,MXLINX ;[20] TEST-VALUE LE MAX.EXT.LINE NO.?
JRST PA10 ;[20] NO-ERROR
MOVEM P2,LINPPG ;[11] REDEFINE LENGTH
OUTSTR E2 ;[11] PRINT WARNING
PA5: MOVEM P2,PAGSIZ ;[11] STORE NEW VALUE
OUTSTR M2 ;OUTPUT CHANNEL REDEFINE MSG
JRST PA40
PA10: OUTSTR E8 ;ERROR-ILLEGAL PAGE SIZE ARGUMENT
JRST PA40
PA20: OUTSTR E3 ;ERROR-GARBAGE AT EOC
PA40: POPJ P, ;RETURN
SUBTTL ZERO COMMAND PROCESSING
;SUBROUTINE .ZERO:
; PROCESS MAKVFU ZERO COMMAND. STORE RESULT IN CHNBUF.
;CALLING SEQUENCE:
; PUSHJ P,.ZERO
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; WHERE T1=18 BIT DISPATCH ADDRESS FOUND IN CMD TABLE
;INPUT: DECIMAL TTY INPUT SPECIFYING CHANNEL TO BE ZERO'ED
; P1 = ASCII TERMINATOR CHAR FROM GETSIX IN MAINLINE
;OUTPUT: CHANNEL CLEARED
; P1 = ASCII TERMINATOR CHAR FOR ENTIRE LINE
; IDENTIFIED ERRORS E3,19
;AC'S USED: P1,P2
.ZERO: CAIN P1,12 ;TEST-TERMINATOR = LF?
JRST ZE10 ;YES-ERROR
PUSHJ P,GETDEC ;READ A DECIMAL VALUE FROM TTY
JRST ZE10 ;NULL OR INVALID RETURN
PUSHJ P,TERMLF ;TEST-TERMINATOR = LF?
JRST ZE20 ;NO-PRINT ERROR
JUMPLE P2,ZE10 ;TEST-VALUE GT 0? JUMP=NO
CAILE P2,MAXCHL ;TEST-VALUE GT BIGGEST CHANNEL?
JRST ZE10 ;YES, ILLEGAL ARGUMENT
MOVEM P2,CHANEL ;PUT CHANNEL # TO BE CLEARED IN CHANEL
PUSHJ P,CLRVFU ;AND CLEAR IT
JRST ZE40
ZE10: OUTSTR E19 ;ERROR-ILLEGAL CHANNEL ARGUMENT
JRST PA40
ZE20: OUTSTR E3 ;ERROR-GARBAGE AT EOC
ZE40: POPJ P, ;RETURN
SUBTTL TYPE COMMAND PROCESSING
;SUBROUTINE .TYPE:
; PROCESS MAKVFU TYPE COMMAND. STORE RESULT IN TYPENO.
; IF TYPE IS LP05/LP14, SET CH 12 BOT
;CALLING SEQUENCE:
; PUSHJ P,.TYPE
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; WHERE T1=18 BIT DISPATCH ADDRESS FOUND IN CMD TABLE
;INPUT: TYPE OF LINE PRINTER VFU IS FOR, LP05, LP07, OTHER
; (NULL = "OTHER")
; P1 = ASCII TERMINATOR CHAR FROM GETSIX IN MAINLINE
;OUTPUT: CHANNEL CLEARED
; TYPENO = 5 FOR LP05/LP14, 7 FOR LP07, 0 FOR OTHER
; IF LP05/LP14, CHANNEL 12 BOTTOM IS SET
; IDENTIFIED ERROR E3
;AC'S USED: P1,P2,T1
.TYPE: CAIN P1,12 ;LF?
JRST TYP60 ;NOTHING
PUSHJ P,GETSIX ;GET ARGUMENT
JRST TYP60 ;NO ARG, ASSUME "OTHER"
PUSHJ P,TERMLF ;IS TERMINATOR = LF?
JRST TYP30 ;NO, ERROR
CAME P2,[SIXBIT /LP14/] ;LP14?
CAMN P2,[SIXBIT /LP05/] ; OR LP05?
JRST TYP10 ;YES, PROCESS IT
CAMN P2,[SIXBIT /LP07/] ;LP07?
JRST TYP40 ;YES, PROCESS IT
CAME P2,[SIXBIT /OTHER/] ;OTHER?
TYP60: OUTSTR M14 ;"ASSUMING OTHER"
SETZM TYPENO ;0=OTHER
POPJ P,
TYP10: MOVEI P2,5 ;SET UP TYPENO
MOVEM P2,TYPENO
MOVEI T1,^D12 ;SET UP TO SET CHAN 12 BOTTOM
MOVEM T1,CHANEL
MOVEI P1,12 ;LF TO FOOL .BOTOM
PUSHJ P,.BOTOM ;LET .BOTOM SET IT
JFCL
OUTSTR M15 ;AND TELL USED CH 12 BOT SET
POPJ P,
TYP40: MOVEI P2,7 ;7=LP07
MOVEM P2,TYPENO ;IN TYPENO
OUTSTR M16 ;REMIND USER LPI=0
POPJ P,
TYP30: OUTSTR E3 ;GARBAGE AT END-OF-LINE
POPJ P,
SUBTTL ALL SUBCOMMAND PROCESSING
;SUBROUTINE .ALL:
; PROCESS MAKVFU ALL SUBCOMMAND RELATED TO CHANNEL
; COMMAND. SETS BIT FOR ALL LINES (NOT IN FORMS BREAK
; AREA) OF SPECIFIED CHANNEL IN INTERNAL VFU TABLE.
;CALLING SEQUENCE:
; PUSHJ P,.ALL
; ERROR RETURN
; NORMAL RETURN
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; ERROR RETURN
; NORMAL RETURN
; WHERE T1= 18-BIT DISPATCH ADDR FOUND IN SUBCMD TABLE
;INPUT: P1 = TERMINATOR CHAR FROM GETSIX
;OUTPUT: BITS SET IN VFU INTERNAL TABLE FOR ALL LINES OF
; SPECIFIED CHANNEL.
;AC'S USED: P1,T1
;AC'S SAVED: P1
.ALL: PUSHJ P,TERMLF ;[10] TEST-TERMINATOR=LF?
JRST A20 ;NO- ERROR
PUSHJ P,CLRVFU ;CLEAR 4 WORDS FOR CHANNEL
MOVEI T1,1 ;START W/ LINE 1
SOS T1 ;CONVERT TO INTERNAL LINE NO.
A10: PUSHJ P,SETBIT ;SET BIT FOR SPECIFIED LINE OF CHANNEL
;SPECIFIED IN CHANEL
AOS T1 ;INCREMENT LINE NUMBER
CAMGE T1,PAGSIZ ;TEST-LINE GE PAGE SIZE?
JRST A10 ;NO-SET BIT FOR NEXT LINE
AOS (P) ;PRODUCE SKIP RETURN
JRST A30
A20: OUTSTR E3 ;ERROR-GARBAGE AT EOC
A30: POPJ P, ;RETURN
SUBTTL BOTTOM SUBCOMMAND PROCESSING
;SUBROUTINE .BOTOM:
; PROCESS MAKVFU BOTTOM SUBCOMMAND RELATED TO THE CHANNEL
; COMMAND. SETS BIT IN LAST LINE BEFORE FORMS BREAK IN
; INTERNAL VFU TABLE FOR SPECIFIED LINE.
;CALLING SEQUENCE:
; PUSHJ P,.BOTOM
; ERROR RETURN
; NORMAL RETURN
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; ERROR RETURN
; NORMAL RETURN
; WHERE T1= 18-BIT DISPATCH ADDR FOUND IN SUBCMD TABLE
;INPUT: P1 = TERMINATOR CHARACTER FROM GETSIX
;OUTPUT: BIT SET FOR LAST LINE BEFORE FORMS BREAK IN INTERNAL
; VFU TABLE FOR CHANNEL SPECIFIED.
; IDENTIFIED ERRORS E3,17
;AC'S USED: T1,P1
;AC'S SAVED: P1
.BOTOM: PUSHJ P,TERMLF ;[10] TEST-TERMINATOR=LF?
JRST B10 ;NO-ERROR
MOVE T1,CHANEL ;[19]
CAIN T1,1 ;[19] TEST-CHANNEL 1?
JRST B15 ;[19] YES- ILLEGAL
PUSHJ P,CLRVFU ;CLEAR 4 WORDS FOR CHANNEL
MOVE T1,PAGSIZ ;SPECIFY PAGE SIZE AS EXTERNAL LINE
SOS T1 ;CONVERT TO INTERNAL LINE NO. FOR SETBIT
PUSHJ P,SETBIT ;SET BIT IN LAST LINE OF CHANNEL
AOS (P) ;PRODUCE SKIP RETURN
JRST B20
B10: OUTSTR E3 ;PRINT ERROR-GARBAGE AT EOC
JRST B20 ;[19]
B15: OUTSTR E17 ;[19] PRINT ERROR- CHANNEL 1 BOTTOM
B20: POPJ P, ;RETURN
SUBTTL EVERY SUBCOMMAND PROCESSING
;SUBROUTINE .EVRY:
; PROCESS MAKVFU EVERY SUBCOMMAND RELATED TO CHANNEL
; COMMAND. SET BITS IN LINES THAT ARE MULTIPLES OF THE
; STEP SIZE + 1 IN THE INTERNAL VFU TABLE FOR THE
; SPECIFIED CHANNEL. I.E., IF STEP SIZE = 10, THEN LINES
; 1,11,21,31,ETC WOULD BE SET.
;CALLING SEQUENCE:
; PUSHJ P,.EVRY
; ERROR RETURN
; NORMAL RETURN
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; ERROR RETURN
; NORMAL RETURN
; WHERE T1=18-BIT DISPATCH ADDR FOUND IN SUBCMD TABLE
;INPUT: P1 = TERMINATOR CHARACTER FROM GETSIX IN MAINLINE
;OUTPUT: BITS SET IN VFU INTERNAL FILE FOR THE LINES THAT
; ARE 1 + MULTIPLES OF THE STEP SIZE (I.E., 1,21,
; 41, ETC FOR C 1 E 20[CR] )
; P1 = ASCII TERMINATOR CHAR FOR ENTIRE LINE
; IDENTIFIED ERRORS E3,11
;AC'S USED: T1,P1,P2
;SECONDARY ENTRY POINT:
; PUSHJ P,EVINIT
; ERROR RETURN
; NORMAL RETURN
; THIS ENTRY IS USED BY SUBROUTINE INIT TO DEFINE
; THE DEFAULT VFU.THE ONLY INPUT FOR THIS ENTRY
; IS P2 = EVERY ARGUMENT. OUTPUT IS SAME AS .EVRY.
.EVRY: CAIN P1,12 ;TEST-TERMINATOR = LF?
JRST EV20 ;YES-ERROR
PUSHJ P,GETDEC ;READ IN STEP SIZE
JRST EV20 ;NULL = ERROR
PUSHJ P,TERMLF ;[10] TEST-TERMINATOR=LF?
JRST EV30 ;NO-ERROR
JUMPLE P2,EV20 ;TEST-STEP SIZE GT 0? JUMP = NO
CAMLE P2,PAGSIZ ;TEST-STEP SIZE LE PAGE SIZE?
JRST EV20 ;NO-ERROR
EVINIT: PUSHJ P,CLRVFU ;CLEAR 4 WORDS FOR CHANNEL
MOVEI T1,1 ;START W/ LINE 1
SOS T1 ;CONVERT TO INTERNAL LINE NO.
EV10: PUSHJ P,SETBIT ;SET BIT FOR LINE IN VFU
ADD T1,P2 ;ADD STEP SIZE TO LINE NO.
CAMGE T1,PAGSIZ ;TEST-END OF CHANNEL?
JRST EV10 ;NO-SET BIT FOR NEXT LINE
AOS (P) ;PRODUCE SKIP RETURN
JRST EV40
EV20: OUTSTR E11 ;ERROR-ILLEGAL EVERY ARGUMENT
JRST EV40
EV30: OUTSTR E3 ;ERROR-GARBAGE AT EOC
EV40: POPJ P, ;RETURN
SUBTTL LINES SUBCOMMAND PROCESSING
;SUBROUTINE .LINES:
; PROCESS MAKVFU LINES SUBCOMMAND RELATED TO CHANNEL
; COMMAND. SETS BITS IN THE INTERNAL VFU TABLE FOR
; THE LINES AND CHANNEL SPECIFIED. ALL ERRORS CAUSE ENTIRE
; COMMAND TO BE IGNORED.
;CALLING SEQUENCE:
; PUSHJ P,.LINES
; ERROR RETURN
; NORMAL RETURN
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; ERROR RETURN
; NORMAL RETURN
; WHERE T1=18-BIT DISPATCH ADDR FOUND IN SUBCMD TABLE
;INPUT: P1 = ASCII TERMINATOR CHAR FROM GETSIX IN MAINLINE
; DECIMAL TTY INPUT FOR SPECIFIC LINE NUMBERS
;OUTPUT: BITS SET IN INTERNAL VFU FOR LINES AND CHANNEL SPECIFIED
; P1 = ASCII TERMINATOR CHAR FOR ENTIRE LINE OF INPUT
; IDENTIFIED ERRORS 12,18
;AC'S USED: T1,P1,P2
.LINES:
;SAVE 4 WORDS OF ORIGINAL VFU BIT PATTERN FOR CHANNEL IN OLDVFU IN
;CASE OF ERROR
SETZM FLINE1 ;[19] CLEAR LINE 1 FLAG
MOVE T1,CHANEL ;GET EXTERNAL CHANNEL NO.
SOS T1 ;CONVERT TO INTERNAL CHANNEL NO.
IMULI T1,<MAXLIN/^D36+1> ;COMPUTE PTR TO START OF 4 WORD
;CHANNEL BLOCK, REL TO CHNBUF
ADDI T1,CHNBUF ;COMPUTE ABS ADDR OF CHANNEL IN VFU
MOVEM T1,VFUADR ;SAVE ADDR FOR ERROR RECOVERY
MOVSS T1 ;PUT SOURCE ADDR IN LH
HRRI T1,OLDVFU ;PUT DESTINATION ADDR IN RH
BLT T1,OLDVFU+3 ;SAVE 4 WORDS STARTING AT OLDVFU
;CONTINUE WITH .LINES PROCESSING
PUSHJ P,CLRVFU ;CLEAR 4 WORD FOR CHANNEL
CAIN P1,12 ;TEST-TERMINATOR = LF?
JRST L30 ;YES-ERROR
L20: PUSHJ P,GETDEC ;[10] READ A LINE NO.
JRST L25 ;INVALID OR NULL
JUMPLE P2,L30 ;TEST-LINE NO. GT 0? JUMP=NO
CAMLE P2,LINPPG ;[21] TEST-LINE NO. LE LENGTH?
JRST L30 ;NO - ERROR
MOVE T1,CHANEL ;[19]
CAIE T1,1 ;[19] TEST-CHANNEL 1?
JRST L23 ;[19] NO
CAIN P2,1 ;[19] YES - TEST-LINE 1?
SETOM FLINE1 ;[19] YES-SET LINE 1 FLAG
L23: MOVE T1,P2 ;[19] LOAD T1 FOR INPUT TO SETBIT
SOS T1 ;CONVERT TO INTERNAL LINE NO.
PUSHJ P,SETBIT ;SET BIT FOR LINE IN CHANNEL
;SPECIFIED BY CHANEL
CAIE P1,12 ;TEST-TERMINATOR = LF?
JRST L20 ;NO-GET ANOTHER LINE
MOVE T1,CHANEL ;[19]
CAIE T1,1 ;[19] TEST-CHANNEL 1?
JRST L27 ;[19] NO -IGNORE TEST FOR LINE 1 FLAG
MOVE T1,FLINE1 ;[19] YES
JUMPN T1,L27 ;[19] TEST-LINE 1 FLAG SET? JUMP=YES
OUTSTR E18 ;[19] NO-PRINT ERROR-C 1 L N NE 1 ERROR
JRST L35 ;[19] RESTORE VFU
L25: PUSHJ P,TERMLF ;[10] TEST-CHECK FOR LF?
JRST L30 ;[10] NO LF - ERROR
L27: AOS (P) ;[10] PRODUCE SKIP RETURN
JRST L40
L30: OUTSTR E12 ;ERROR-ILLEGAL LINES ARG
;RESTORE ORIGINAL VFU DATA FOR CHANNEL FROM OLDVFU BECAUSE OF ERROR
L35: MOVE T1,VFUADR ;PUT DEST ADDR IN RH
MOVE T2,T1 ;SETUP END LOCATION-3
HRLI T1,OLDVFU ;PUT SOURCE ADDR IN LH
BLT T1,3(T2) ;RESTORE 4 WORDS OF VFU STARTING AT
;VFUADR, ENDING AT VFUADR + 3
;CONTINUE .LINES PROCESSING
L40: POPJ P, ;RETURN
SUBTTL TOP SUBCOMMAND PROCESSING
;SUBROUTINE .TOP:
; PROCESS MAKVFU TOP SUBCOMMAND RELATED TO THE
; CHANNEL COMMAND. SETS BIT IN LINE 1 OF CHANNEL
; SPECIFIED IN INTERNAL VFU TABLE.
;CALLING SEQUENCE:
; PUSHJ P,.TOP
; ERROR RETURN
; NORMAL RETURN
;NORMAL CALLING SEQUENCE:
; PUSHJ P,0(T1)
; ERROR RETURN
; NORMAL RETURN
; WHERE T1= 18-BIT DISPATCH ADDR FOUND IN SUBCMD TABLE
;INPUT: P1 = ASCII TERMINATOR CHAR FROM GETSIX IN MAINLINE
;OUTPUT: LINE 1 BIT SET IN INTERNAL VFU TABLE FOR CHANNEL
; SPECIFIED.
; IDENTIFIED ERROR E3
;AC'S USED: T1,P1
;AC'S SAVED: P1
.TOP: PUSHJ P,TERMLF ;[10] TEST-TERMINATOR=LF?
JRST T10 ;NO-ERROR
PUSHJ P,CLRVFU ;CLEAR 4 WORDS FOR CHANNEL
MOVEI T1,1 ;SPECIFY EXTERNAL LINE 1 FOR SETBIT
SOS T1 ;CONVERT TO INTERNAL LINE NO.
PUSHJ P,SETBIT ;SET BIT IN LINE 1 OF CHANNEL SPECIFIED
;IN CHANEL
AOS (P) ;PRODUCE SKIP RETURN
JRST T20
T10: OUTSTR E3 ;PRINT ERROR-GARBAGE AT EOC
T20: POPJ P, ;RETURN
SUBTTL BITSET UTILITY SUBROUTINE
;SUBROUTINE BITSET:
; THIS ROUTINE TESTS TO DETERMINE IF A BIT IS SET IN THE
; INTERNAL VFU TABLE FOR THE LINE NUMBER AND CHANNEL
; SPECIFIED. A SKIP RETURN INDICATES THAT THE LINE
; FOR THE SPECIFIED CHANNEL HAS ITS BIT SET IN THE VFU
; TABLE.
;CALLING SEQUENCE:
; PUSHJ P,BITSET
; NOT SET RETURN
; SET RETURN
;INPUT: T1 = INTERNAL LINE NUMBER 0-MAXLIN (RH ONLY)
; CHANEL = EXTERNAL CHANNEL NO 1-MAXCHL
;OUTPUT: SKIP RETURN IF BIT FOR LINE SET
; NO SKIP IF NOT SET
;AC'S USED: T1,T2,T3,T4
;AC'S SAVED: T1
;NOTES: (1) THE LOGIC USED HERE IS VERY SIMILAR TO SETBIT. SEE
; SETBIT FOR FURTHER DETAILS.
BITSET: PUSH P,T1 ;SAVE LINE NUMBER ON STACK
HRRZ T1,T1 ;CLEAR LEFT HALF
IDIVI T1,^D36 ;GET WORD AND BIT POINTERS
MOVE T4,CHANEL
SOS T4 ;COMPUTE INTERNAL CHANNEL NO.
IMULI T4,<MAXLIN/^D36+1>
ADDI T1,0(T4)
MOVSI T3,(1B0) ;SET BIT 0
MOVNI T2,0(T2) ;NEGATE TO ROTATE RIGHT
ROT T3,(T2) ;POSITION BIT SPECIFYING LINE NO.
MOVE T4,CHNBUF(T1)
POP P,T1 ;RESTORE T1
TDNE T4,T3 ;TEST-BIT SET FOR LINE IN CHANNEL?
AOS (P) ;YES-PRODUCE SKIP RETURN
POPJ P, ;RETURN
SUBTTL BLDVFU UTILITY SUBROUTINE
;SUBROUTINE BLDVFU:
; THIS SUBROUTINE BUILDS AN EXTERNAL VFU WORD. THE VFU
; WORD DESCIRBES ALL ASSIGNED CHANNELS FOR A GEVEN
; INTERNAL LINE NUMBER. BIT 35 = CHANNEL 1( NOT 0!)
; BIT 28 = CHANNEL 8. THIS ROUTINE CONVERTS THE INTERNAL
; VFU INGFORMATION FOR A LINE TO EXTERNAL
;CALLING SEQUENCE:
; PUSHJ P, BLDVFU
;INPUT: Q1 = INTERNAL LINE NUMBER (0-MAXLIN)
;OUTPUT: P2 = LINE WORD. BIT35=CH 1,BIT 34 = CH 2,ETC
;AC'S USED: T1,T2,T3,T4,Q1,P2
;AC'S SAVED: Q1
BLDVFU: SETZ P2, ;INIT LINE WORD
MOVSI T3,-MAXCHL ;INIT FOR ALL CHANNELS (-MAXCHL,,0)
BL10: MOVEI T4,<MAXLIN/^D36+1> ;COMPUTE CHANNEL BUFFER SIZE(=4)
MOVEI T1,1 ;SET BIT 1B35
LSH T1,1(T3) ;POSITION IT USING CHANNEL NO.
;(T3)RH USED. (T3)LH NOT USED
TDNN T1,CHNMSK ;TEST-IS THIS CHANNEL ASSIGNED?
JRST BL20 ;NO-CHECK FOR MARKING
;COMPUTE POINTER TO START OF 4 WORD CHANNEL BLOCK IN INTERNAL VFU
;TABLE (IVT), RELATIVE TO CHNBUF.
IMULI T4,0(T3) ;YES-WORDS/CHANNEL * CHANNEL
;COMPUTE WORD AND BIT POSITION IN IVT FOR SPECIFIED LINE RELATIVE TO
;START OF THE 4 WORD CHANNEL BLOCK. UPON COMPLETION OF THE FOLLOWING
;INSTRUCTION, T1 WILL CONTAIN THE WORD OFFSET RELATIVE TO THE START
;OF THE 4 WORD CHANNEL BLOCK, AND T2 WILL CONTAIN THE BIT OFFSET
;RELATIVE TO THE WORD IN T1.
MOVEI T1,0(Q1) ;GET LINE NO.
IDIVI T1,^D36 ;COMPUTE WORD AND BIT OFFSET
;COMPUTE POINTER TO WORD IN IVT FOR SPECIFIED LINE, RELATIVE TO
;CHNBUF.
ADDI T4,0(T1) ;AD START BLK + WD PTR REL START
;POSITION BIT IN MASK CORRESPONDING TO BIT POSITION OF LINE NUMBER
;IN IVT FOR SPECIFIED CHANNEL AND LINE.
MOVNI T2,0(T2) ;NEGATE TO ROTATE RIGHT
MOVSI T1,(1B0) ;SET BIT 0 IN MASK
ROT T1,(T2) ;POSITION MASK BIT USING BIT OFFSET
;TEST- IS THE BIT SET IN THE IVT FOR THIS CHANNEL AND LINE?
TDNE T1,CHNBUF(T4) ;TEST-SET?
JRST BL30 ;YES-SET IT IN EXTERNAL VFU TABLE
JRST BL40 ;NO-CHECK NEXT CHANNEL
;TEST-IS MARKING IN FORCE? IF SO, SET BIT FOR CHANNEL
BL20: SKIPN MARKW ;TEST-IS MARKING IN FORCE?
JRST BL40 ;NO-CHECK NEXT CHANNEL
;POSITION BIT ACCORDING TO CHANNEL NUMBER. SET IT IN LINE WORD
BL30: MOVEI T1,1 ;GET 1B35
LSH T1,0(T3) ;POSITION ACCORDING TO CHANNEL
;BIT 35=CHANNEL 1
IOR P2,T1 ;SET I IN LINE WORD
;TEST-HAVE ALL CHANNELS BEEN PROCESSED?
BL40: AOBJN T3,BL10 ;TEST-ALL DONE? SKIP=NO
POPJ P, ;RETURN
SUBTTL CLRVFU UTILITY SUBROUTINE
;SUBROUTINE CLRVFU:
; THIS ROUTINE CLEARS THE 4 WORDS IN THE
; INTERNAL VFU TABLE ASSOCIATED WITH THE CHANNEL
; NUMBER INPUT IN CHANEL.
;CALLING SEQUENCE:
; PUSHJ P,CLRVFU
;INPUT: CHANEL = CHANNEL NUMBER
;OUTPUT: 4 WORDS IN INTERNAL VFU TABLE CLEARED FOR CHANNEL
;AC'S USED: T1
CLRVFU: MOVE T1,CHANEL ;GET EXTERNAL NO.
SOS T1 ;CONVERT TO INTERNAL NO.
IMULI T1,<MAXLIN/^D36+1> ;COMPUTE PTR TO START OF 4 WD BLK
ADDI T1,CHNBUF ;COMPUTE ABS ADDR OF CH IN CHNBUF
SETZM (T1) ;CLEAR THE 4 WORDS
SETZM 1(T1)
SETZM 2(T1)
SETZM 3(T1)
POPJ P, ;RETURN
SUBTTL DFAULT UTILITY SUBROUTINE
;SUBROUTINE DFAULT:
; DEFINES THE FOLLOWING FILE STRUCTURE DEFAULT
; FOR THE INFORMATION USED BY OPEN AND ENTER.
; DSK:NORMAL.VFU[0,0]
;CALLING SEQUENCE:
; PUSHJ P,DFAULT
;INPUT: NONE
;OUTPUT: DEFAULT FILE SPEC IN STR,FILNAM,EXT,PPN
;AC'S USED: T1
DFAULT: MOVSI T1,'DSK' ;DEFAULT STRUCTURE -OPEN BLOCK
MOVEM T1,STR
MOVE T1,[SIXBIT/NORMAL/] ;DEFAULT FILENAME = NORMAL
MOVEM T1,FILNAM
MOVSI T1,'VFU' ;DEFAULT EXTENSION = VFU
MOVEM T1,EXT
SETZM PPN ;DEFAULT PPN = 0,0
POPJ P, ;RETURN
SUBTTL GETDEC AND GETOCT UTILITY SUBROUTINES
;SUBROUTINE GETDEC(GETOCT):
; READ A DECIMAL (OCTAL) INTEGER NUMBER FROM TTY.
; NUMBER STORED IN P2.
; - RANGE: 36 BIT WORD
; - LEADING BLANKS IGNORED
; - ASCII 60-67 (OCTAL) VALID FOR GETOCT
; - ASCII 60-71 (OCTAL) VALID FOR GETDEC
; - ASCII 101-177 (OCTAL) INVALID CHARACTERS
; - ASCII 0-57,72-100 (OCTAL) ARE TERMINATOR CHARS
;CALLING SEQUENCE:
; PUSHJ P,GETDEC(OR GETOCT)
; ERROR RETURN - INVALID OR NULL INPUT
; NORMAL RETURN
;INPUT: NONE
;OUTPUT: P1 = ASCII TERMINATOR CHAR FOR NORMAL RETURN
; = INVALID CHAR OR LF FOLLOWING NULL FOR ERROR RETURN
; = 9 IS INVALID CHAR FOR GETOCT - CAUSES ERROR RETURN
; P2 = DECIMAL (OCTAL) NUMBER FOR NORMAL RETURN
;AC'S USED: T1,T2,T4,P1,P2
;NOTES: (1) THIS ROUTINE WAS DERIVED FROM S. PAAVOLA'S ROUTINE
; OF THE SAME NAME (WRITTEN 11/1/75). A TEST FOR NULL
; CHAR WAS ADDED AT G40: TO DISTINGUISH BETWEEN "0"
; AND NULL INPUT.
GETDEC: SKIPA T2,[^D10] ;SET DECIMAL RADIX
GETOCT: MOVEI T2,10 ;SET OCTAL RADIX
SETZ T1, ;CLEAR NUMBER LOCATION
SETZ T4, ;CLEAR NON-NULL FLAG
GT10: PUSHJ P,TYI ;READ A CHAR
JRST GT50 ;EOL = NULL = ERROR
CAIN P1," " ;TEST-CHAR = BLANK?
JRST GT10 ;YES-SKIP LEADING BLANKS
GT20: CAIE T2,10 ;TEST-OCTAL RADIX?
JRST GT30 ;NO-SKIP TEST FOR 9
CAIN P1,"8" ;[25] TEST FOR CHAR = 8?
JRST GT50 ;[25] YES - INVALID OCTAL CHAR
CAIN P1,"9" ;TEST-CHAR = 9?
JRST GT50 ;YES-INVALID OCTAL CHAR
GT30: CAIN P1,"]" ;[15] TEST-CHAR = RT BRACKET?
JRST GT35 ;[15] YES - VALID TERMINATOR
CAIL P1,"A" ;[15] TEST- CHAR VALID?
JRST GT50 ;NO-INVALID CHAR
GT35: CAIGE P1,"0" ;TEST-CHAR= VALID DIGIT?
JRST GT40 ;NO-TERMINATOR CHAR
CAIL P1,"0"(T2) ;TEST-CHAR LT RADIX?
JRST GT40 ;NO-TERMINATOR
SETO T4, ;SET NON-NULL FLAG
IMUL T1,T2 ;SHIFT DIGIT LEFT BY RADIX
ADDI T1,-"0"(P1) ;ADD NEW DIGIT
PUSHJ P,TYI ;READ NEXT CHARACTER
JRST GT40 ;EOL
JRST GT20 ;RANGE CHECK NEXT CHAR
GT40: SKIPE T4 ;TEST-NULL INPUT? SKIP=YES
AOS (P) ;PRODUCE SKIP RETURN
GT50: MOVE P2,T1 ;SETUP P2
POPJ P, ;RETURN
SUBTTL GETSIX UTILITY SUBROOUTINE
;SUBROUTINE GETSIX:
; READ A KEYWORD FROM THE TTY. CONVERT TO SIXBIT,
; STORE RESULT IN P2. STORE BYTE POINTER TO LAST
; CHARACTER ENTERED IN P3.
; - KEYWORD RANGE: 1-6 CHARACTERS
; - LEADING BLANKS IGNORED
; - ASCII 60-71,101-132 (OCTAL) VALID
; - ALL OTHER CHAR ARE KEYWORD TERMINATORS
;CALLING SEQUENCE:
; PUSHJ P,GETSIX
; NULL RETURN
; NORMAL RETURN
;INPUT: NONE
;OUTPUT: P1 = ASCII TERMINATOR CHARACTER
; P2 = SIXBIT KEYWORD(1-6 CHARS)
; = 0 FOR NULL RETURN
; P3 = BYTE POINTER TO LAST BYTE ENTERED IN P2.
; (SETUP INITALLY BY POINT PSEUDO-OP)
;AC'S USED: T1,T2,P1,P2,P3
;NOTES: (1) THE P-FIELD OF THE SIXBIT BYTE POINTER
; IS USED TO DETERMINE WHETHER THERE IS
; ROOM IN THE SIXBIT WORD TO STORE A
; VALID CHARACTER. IF P-FIELD=0, THE CHAR IS
; IGNORED. THUS, A KEYWORD CAN BE LONGER
; THAN 6 CHARACTERS. HOWEVER, ONLY THE FIRST
; 6 CHARS WILL BE RECOGNIZED.
; (2) THIS ROUTINE WAS DERIVED FROM S. PAAVOLA'S
; ROUTINE OF THE SAME NAME (11/1/75)
GETSIX: SETZM T1 ;CLEAR SIXBIT WORD
G10: PUSHJ P,TYI ;READ A CHAR
JRST G40 ;EOL - NULL
CAIN P1," " ;TEST-CHAR = BLANK?
JRST G10 ;YES-SKIP LEADING BLANKS
MOVE T2,[POINT 6,T1] ;NO-SETUP BYTE PTR IN T2
; TO LOAD 6 BIT CHARS IN T1
G20: CAILE P1,"Z" ;TEST-CHAR GT Z?
JRST G30 ;YES-TERMINATOR CHAR
CAIGE P1,"0" ;[24] TEST-CHAR LT 0?
JRST G30 ;YES-TERMINATOR CHAR
CAIL P1,"A" ;TEST-CHAR GE A?
JRST G22 ;YES-VALID CHARACTER
CAILE P1,"9" ;TEST-CHAR GT 9?
JRST G30 ;YES-TERMINATOR CHAR
G22: TLNN T2,777000 ;TEST-ROOM FOR CHAR?
; (P-FIELD OF T2)
JRST G25 ;NO-READ CHAR UNTIL TERMINATOR
SUBI P1,40 ;YES-COMPUTE SIXBIT VALUE
IDPB P1,T2 ;DEPOSIT SIXBIT BYTE IN T1
G25: PUSHJ P,TYI ;READ NEXT CHAR
JRST G30 ;EOL - EXIT
JRST G20 ;CHECK RANGE OF CHAR
G30: JUMPE T1,G40 ;TEST-NULL RESULT?
AOS (P) ;NO-PRODUCE NORMAL RETURN
G40: MOVE P2,T1
MOVE P3,T2
POPJ P, ;RETURN
SUBTTL GTFLNM UTILITY SUBROUTINE
;SUBROUTINE GTFLNM:
; READ A FILE SPECIFICATION FROM THE TTY.
; RESULT STORED IN FILE BLOCK FOR USE BY LOOKUP.
; - FORMAT = DSK: FILNAM.EXT[P,PN]
; - DEFAULT = DSK: NORMAL.VFU[0,0]
; WARNING: SPACES AND TABS ARE NOT ALLOWED AS PART
; OF THE FILE SPEC
;CALLING SEQUENCE:
; PUSHJ P,GTFLNM
; ERROR RETURN
; NORMAL RETURN
;INPUT: NONE
;OUTPUT: P1 = ASCII TERMINATOR CHAR FOR ENTIRE LINE
; STR,FILNAM,EXT,PPN VARIABLES DEFINED
; IDENTIFIED ERROR E1
; THE ERROR MESSAGE "ILLEGAL FILE SPECIFICATION"
; IS GENERATED FOR ALL ILLEGAL INPUT. SPACES
; AND TABS ARE NOT ALLOWED BEFORE THE COLON,PERIOD
; LEFT AND RIGHT BRACKETS, AND CR.
;AC'S USED: P1,P2,P4
;NOTES: (1) THIS ROUTINE BASED ON S. PAAVOLA'S ROUTINE OF
; THE SAME NAME (WRITTEN 11/1/75). MODIFIED TO
; HANDLE ALL COMBINATIONS OF FILE SPEC INPUT.
GTFLNM: PUSHJ P,GETSIX ;GET A KEYWORD
JRST GF20 ;NULL = NO DSK:FILNAM.EXT
CAIE P1,":" ;TEST-KEYWORD=STRUCTURE?
JRST GF10 ;NO-MUST BE FILE NAME
MOVEM P2,STR ;YES-SAVE STRUCTURE NAME
PUSHJ P,GETSIX ;GET ANOTHER KEYWORD
JRST GF20 ;NO EXTENSION
GF10: MOVEM P2,FILNAM ;SAVE FILE NAME
CAIE P1,"." ;TEST-EXTENSION FOLLOWING?
JRST GF20 ;NO-CHECK FOR PPN
PUSHJ P,GETSIX ;YES-READ IT IN
JFCL ;NULL MEANS P2 = 0
HLLZM P2,EXT ;SAVE 3 CHAR EXTENSION
GF20: CAIE P1,"[" ;TEST-PPN SPECIFIED?
JRST GF30 ;NO-GO CHECK FOR LF
PUSHJ P,GETOCT ;YES-READ IN PROJ NUMBER
JRST GF40 ;ERROR IN PROJ NO.
HRLM P2,PPN ;SAVE PROJ NO. IN LH
CAIE P1,"," ;TEST-TERMINATOR = COMMA?
JRST GF40 ;NO-FILE SPEC ERROR
PUSHJ P,GETOCT ;YES-READ IN PROG. NO.
JRST GF40 ;ERROR IN PROG. NO.
HRRM P2,PPN ;SAVE PROG. NO. IN RH
CAIN P1,"]" ;TEST- TERMINATOR= RT BRACKET?
PUSHJ P,TYI ;NO-READ ANOTHER CHAR
JFCL ;NO-OP -EOL TEST NEXT LINE
GF30: PUSHJ P,TERMLF ;[10] TEST-LAST CHAR=LF?
JRST GF40 ;NO-PRINT ERROR
AOS (P) ;YES-PRODUCE SKIP RETURN
JRST GF50
GF40: OUTSTR E1 ;ERROR-ILLEGAL FILE SPEC
PUSHJ P,DFAULT ;RESTORE FILE BLOCK DEFAULTS
GF50: POPJ P, ;RETURN
SUBTTL INIT UTILITY SUBROUTINE
;SUBROUTINE INIT:
; INITIALIZE ALL VARIABLES
;CALLING SEQUENCE:
; PUSHJ P,INIT
;INPUT: NONE
;OUTPUT: VARIABLES DEFAULTED
;AC'S USED: T1,P1,P2
INIT: SETZM BZCOR ;CLEAR ENTIRE LOW SEGMENT,MINUS STACK
MOVE T1,[BZCOR,,BZCOR+1]
BLT T1,ZZCOR
MOVEI T1,DLENTH ;LENGTH = 66
MOVEM T1,LINPPG
MOVEI T1,DPAGE ;PAGE SIZE = 60
MOVEM T1,PAGSIZ
SETZM MARKW ;NO MARKING
MOVEI T1,DCHN ;CHANNEL MASK = CH1-8
MOVEM T1,CHNMSK
MOVEI T1,DFORM ;FORMS BREAK CH = 5
MOVEM T1,FORMS
SETZM OFLAG ;CLEAR OUTPUT FLAG
SETZM LPI ;DEFAULT LPI=0
SETZM TYPENO ;DEFAULT TYPE 0 (OTHER)
MOVEI T1,1
MOVEM T1,CHANEL ;DEFINE CHANNEL 1 TOP
MOVEI P1,12 ;FOOL .TOP
PUSHJ P,.TOP
JFCL
AOS CHANEL ;DEFINE CHANNEL 2 EVERY 30
MOVEI P2,^D30
PUSHJ P,EVINIT
JFCL
AOS CHANEL ;DEFINE CHANNEL 3 EVERY 2
MOVEI P2,2
PUSHJ P,EVINIT
JFCL
AOS CHANEL ;DEFINE CHANNEL 4 EVERY 3
MOVEI P2,3
PUSHJ P,EVINIT
JFCL
AOS CHANEL ;DEFINE CHANNEL 5 ALL
MOVEI P1,12 ;FOOL .ALL
PUSHJ P,.ALL
JFCL
AOS CHANEL ;DEFINE CHANNEL 6 EVERY 10
MOVEI P2,^D10
PUSHJ P,EVINIT
JFCL
AOS CHANEL ;DEFINE CHANNEL 7 EVERY 20
MOVEI P2,^D20
PUSHJ P,EVINIT
JFCL
AOS CHANEL ;DEFINE CHANNEL 8 ALL
MOVEI P1,12 ;FOOL .ALL
PUSHJ P,.ALL
JFCL
MOVEI T1,^D12 ;[22] DEFINE CHANNEL 12 BOTTOM
MOVEM T1,CHANEL ;[22]
MOVEI P1,12 ;[22] FOOL .BOTOM
PUSHJ P,.BOTOM ;[22]
JFCL ;[22]
MOVSI T1,BUFFO ;SETUP OUTPUT BRHB
MOVEM T1,BUFHDR
POPJ P, ;RETURN
SUBTTL IOSUB UTILITY SUBROUTINE
;SUBROUTINE IOSUB:
; THIS SUBROUTINE STORES A BYTE CONATINED IN Q1
; IN THE BUFFER SETUP BY A PREVIOUS OUTBUF MONITOR
; CALL.WHEN THE BUFFER BECOMES FULL, AN OUTPUT UUO IS
; ISSUED ON CH1. OUTPUT ERRORS WILL CAUSE NON-SKIP RETURNS
;INPUT: Q1 = BYTE OF DATA (8 BITS )
;OUTPUT: BYTE STORED IN OUTPUT BUFFER. (7 BITS) WHEN BUFFER
; IS FULL, OUTPUT UUO ISSUED.
;CALLING SEQUENCE:
; PUSHJ P,IOSUB
; ERROR RETURN
; NORMAL RETURN
;AC'S USED: Q1
IOSUB: IDPB Q1,BUFFO+1 ;PUT 7 LOW ORDER BITS OF BYTES IN BUFFER
SOSG BUFFO+2 ;TEST-BUFFER FULL?
OUT CH1, ;YES-OUTPUT BUFFER
AOS (P) ;PRODUCE SKIP RETURN
POPJ P, ;RETURN
SUBTTL NUMS UTILITY SUBROUTINE
;SUBROUTINE NUMS:
; OUTPUT CHANNELS SPECIFIED IN A CHANNEL MASK WORD TO
; THE TTY. MAXCHL CHANNELS AVAILABLE. OUTPUT IS OF THE
; FORM:
; FORMS BREAK CHANNELS = 1 3 4 7 8
;CALLING SEQUENCE:
; PUSHJ P,NUMS
;INPUT: Q1=CHANNEL MASK WORD.CHANNEL 1=BIT34,CHANNEL 8=BIT27
;OUTPUT: CHANNEL NUMBERS ON TTY SPECIFIED IN MASK WORD,
; SEPERATED BY SPACES, TERMINATED BY CR.
;AC'S USED: Q1,T1,P2
;NOTE: (1) THE FOLLOWING CHANNEL NUMBER COUNTER IS [MAXCHL+1]
; BECAUSE BIT 35 IS ASSIGNED TO THE EXTERNAL CHANNEL
; NUMBER 0 WHICH DOES NOT EXIST. IT WILL NEVER BE SET,
; BUT HAS TO BE INCLUDED IN THE LOOP .
NUMS: MOVEI P2,-MAXCHL ;[22]
SOS P2 ;[22]
MOVS P2,P2 ;[22] LH=LOOP CTR, RH= CHANNEL NO.
N10: ROT Q1,-1 ;ROTATE CHANNEL BIT INTO SIGN BIT
JUMPGE Q1,N20 ;TEST-BIT SET ? JUMP=NO
MOVEI T1,(P2) ;LOAD CHANNEL NO FOR PDECI
PUSHJ P,PDECI ;OUTPUT CHANNEL NUMBER
OUTSTR SP ;OUTPUT DELIMITING SPACE
N20: AOBJN P2,N10 ;TEST-DONE W/ ALL CHANNELS? JUMP=NO
OUTSTR CRLF ;OUTPUT CR/LF
POPJ P, ;RETURN
SUBTTL PLINE UTILITY SUBROUTINE
;SUBROUTINE PLINE:
; OUTPUTS THE LINES DEFINED IN THE INTERNAL VFU DATA
; AREA FOR THE SPECIFIED CHANNEL.
;CALLING SEQUENCE:
; PUSHJ P,PLINE
;INPUT: P2 = CHANNEL NUMBER
;OUTPUT: TTY MESSAGE DESCRIBING LINES DEFINED FOR CHANNEL
;AC'S USED: T1,P2
PLINE: MOVSI T1,-MXLINX ;INIT LINE NUMBER FOR BITSET
;[18]LH=LOOP COUNT
;[18] RH=INTERNAL LINE NO. FOR BITSET
MOVEM P2,CHANEL ;INIT CHANNEL NUMBER FOR BITSET
OUTSTR M9 ;OUTPUT LINES MESSAGE
PL40: PUSHJ P,BITSET ;TEST-IS BIT SET FOR LINE + CHANNEL?
JRST PL50 ;NO-LOOK AT NEXT LINE
PUSH P,T1 ;YES-SAVE LINE T1
HRRZS T1 ;CLEAR LH OF T1 FOR PDECI
AOS T1 ;CONVERT TO EXTERNAL LINE NO.
PUSHJ P,PDECI ;OUTPUT LINE NUMBER
OUTSTR SP ;OUTPUT SPACE
POP P,T1 ;RESTORE T1
PL50: AOBJN T1,PL40 ;TEST-END OF CHANNEL? JUMP=NO
MOVE T1,PAGSIZ ;[17]
CAMN T1,LINPPG ;[17] TEST-PAGSIZ=LENGTH?
JRST PL70 ;[17] YES- SKIP FORMS PROCESSING
SKIPN T1,FORMS ;[3] TEST- ANY FORMS CHANNELS DEFINED?
JRST PL70 ;[3] NO
MOVE T2,CHANEL ;[3] MAYBE - CHECK FOR SPECIFIC CHANNEL
MOVEI T3,1 ;[3] SET BIT 1B35
LSH T3,0(T2) ;[3] SHIFT LEFT BY CHANNEL NO.
TDNN T3,T1 ;[3] TEST-IS THIS CH A FORMS BREAK CH?
JRST PL70 ;[3] NO
MOVE T1,PAGSIZ ;[3] START WITH PAGE SIZE
AOS T1 ;[3] START W/ LINE AFTER PAGSIZ
PL60: MOVE T4,T1 ;[3] SAVE T1
PUSHJ P,PDECI ;[3] PRINT ON TTY
OUTSTR SP ;[3] OUTPUT SPACE
MOVE T1,T4 ;[3] RESTORE T1
AOS T1 ;[3] INCREMENT LINE NO.
CAMG T1,LINPPG ;[3] TEST-LINE GT LENGTH?
JRST PL60 ;[3] NO- PRINT ANOTHER LINE NO.
PL70: POPJ P, ;[3] RETURN
SUBTTL POCTI AND PDECI ULILITY SUBROUTINES
;SUBROUTINE POCTI (PDECI):
; THIS SUBROUTINE CONVERTS A 36-BIT POSITIVE INTEGER TO
; OCTAL (DECIMAL) AND PRINTS IT OUT ON THE TTY. THESE
; ROUTINES ARE DESCRIBED ON PG 2-77 OF SRM - VOL 5
;CALLING SEQUENCE:
; PUSHJ P,POCTI(PDECI)
;INPUT: T1 = 36 BIT POSITIVE INTEGER
;OUTPUT: NUMBER PRINTED OUT IN OCTAL (DECIMAL) ON TTY
;AC'S USED: T1,T2,T3
POCTI: SKIPA T3,[^D8] ;SET OCTAL RADIX
PDECI: MOVEI T3,^D10 ;SET DECIMAL RADIX
P10: IDIVI T1,(T3) ;DIVIDE BY RADIX
HRLM T2,(P) ;SAVE REMAINDER ON LH OF STACK
;REMAINDER = LOW ORDER DIGIT
SKIPE T1 ;TEST-END OF NUMBER? SKIP=YES
PUSHJ P,P10 ;RECURSE TO PICK UP NEXT DIGIT
P20: HLRZ T1,(P) ;REMOVE DIGITS-REVERSE ORDER OFF STACK
ADDI T1,60 ;CONVERT TO ASCII
OUTCHR T1 ;OUTPUT DIGIT
POPJ P, ;RETURN VIA ADDRESS ON STACK
;NOTES: (1) THE RETURN ADDRESS AFTER THE PUSHJ TO P10 IS P20.
; THE SKIPE T2 PERMITS EXITING FROM THE P10 LOOP W/O
; USING THE NORMAL POPJ TO RESTORE THE STACK. THIS
; TECHNIQUE IS USED TO STORE DIGITS IN THE LEFT HALF
; OF THE STACK LOCATIONS CONTAINING THE RETURN
; ADDRESSES FOR P10.THE POPJ IN THIS ROUTINE TRANSFERS
; CONTROL N TIMES TO P20 FOR N DIGITS. THE N+1-TH POPJ
; RETURNS CONTROL TO THE ROUTINE THAT ORIGINALLY
; CALLED POCTI (PDECI).
SUBTTL SETBIT UTILITY SUBROUTINE
;SUBROUTINE SETBIT:
; SET A BIT IN THE INTERNAL VFU TABLE CORRESPONDING
; TO THE LINE NUMBER AND CHANNEL NUMBER SPECIFIED.
;CALLING SEQUENCE:
; PUSHJ P,SETBIT
;INPUT: T1 = INTERNAL LINE NUMBER (0-MAXLIN)
; CHANEL = EXTERNAL CHANNEL NUMBER (1-MAXCHL)
;OUTPUT: T1 = LINE NUMBER PRESERVED
; BIT SET IN INTERNAL VFU TABLE FOR GIVEN LINE,CHANNEL
;AC'S USED: T1,T2,T3,T4
;NOTES: (1) SEE VARIABLE SECTION FOR INTERNAL TABLE DESCRIPTION
SETBIT: PUSH P,T1 ;SAVE EXTERNAL LINE NO. ON STACK
;COMPUTE LOCATION OF LINE IN 4 WORD CHANNEL BLOCK. UPON COMPLETION
;OF THE FOLLOWING COMMAND, T1 WILL CONTAIN THE POINTER TO THE WORD
;CONTAINING THE SPECIFIED LINE, RELATIVE TO THE START OF THE 4 WORD
;CHANNEL BLOCK. T2 WILL CONTAIN THE POSITION OF THE BIT IN THE WORD
;CORRESPONDING TO THE LINE NUMBER.
IDIVI T1,^D36
;COMPUTE LOCATION OF LINE IN THE INTERNAL VFU TABLE. UPON COMPLETION
;OF THE SEQUENCE OF COMMANDS, T1 WILL CONTAIN THE POINTER TO THE
;WORD CONTAINING THE SPECIFIED LINE, RELATIVE TO THE START OF THE
;INTERNAL VFU TABLE. (CHNBUF)
MOVE T4,CHANEL ;GET EXTERNAL CHANNEL NO.
SOS T4 ;CONVERT TO INTERNAL CHANNEL NO.
IMULI T4,<MAXLIN/^D36+1> ;COMPUTE PTR TO START OF
;4 WORD CHANNEL BLOCK
ADDI T1,0(T4) ;COMPUTE WORD PTR REL TO CHNBUF
;SET BIT IN VFU TABLE CORRESPONDING TO SPECIFIED LINE AND CHANNEL NO.
MOVSI T3,(1B0) ;SET BIT 0
MOVNI T2,0(T2) ;NEGATE BIT POSITION TO ROTATE RIGHT
ROT T3,(T2) ;POSITION BIT SPECIFYING LINE NO.
IORM T3,CHNBUF(T1) ;SET BIT IN CHNBUF FOR LINE
;RESTORE LINE NUMBER FROM STACK AND RETURN
POP P,T1
POPJ P, ;RETURN
SUBTTL TERMLF UTILITY SUBROUTINE
;SUBROUTINE TERMLF
; THIS SUBROUTINE CHECKS FOR LF TERMINATION AT
; EOC. SKIP OVER SPACES AND TABS. PRODUCE SKIP
; RETURN FOR LF. PRODUCE NO SKIP RETURN FOR GARBAGE
; THIS ROUTINE CREATED DURING EDIT [10]
;CALLING SEQUENCE:
; PUSHJ P,TERMLF
; GARBAGE RETURN
; EOL RETURN
;INPUT: P1 = TERMINATOR SUBTTL TERMLF UTILITY SUBROUTINE
;SUBROUTINE TERMLF
; THIS SUBROUTINE CHECKS FOR LF TERMINATION AT
; EOC. SKIP OVER SPACES AND TABS. PRODUCE SKIP
; RETURN FOR LF. PRODUCE NO SKIP RETURN FOR GARBAGE
; THIS ROUTINE CREATED DURING EDIT [10]
;CALLING SEQUENCE:
; PUSHJ P,TERMLF
; GARBAGE RETURN
; EOL RETURN
;INPUT: P1 = TERMINATOR CHARACTER
;OUTPUT: P1 = LF FOR EOL RETURN, GARBAGE FOR NO SKIP RETURN
;AC'S USED: P1
TERMLF: CAIN P1,12 ;TEST-TERMINATOR = LF?
JRST TE20 ;YES
TE5: CAIN P1,40 ;TEST-TERMINATOR=SPACE?
JRST TE10 ;YES
CAIE P1,11 ;TEST-TERMINATOR=TAB?
JRST TE50 ;NO-NO SKIP RETURN
TE10: PUSHJ P,TYI ;GET A CHARACTER
JRST TE20 ;EOL
JRST TE5 ;CHECK FOR SPACES AND TABS
TE20: AOS (P) ;PRODUCE SKIP RETURN
TE50: POPJ P, ;RETURN
SUBTTL TYI UTILITY SUBROUTINE
;SUBROUTINE TYI:
; READ A CHAR FROM TTY. IGNORE CR. PRODUCE
; SKIP RETURN FOR ALL CHAR BUT LF.
;CALLING SEQUENCE:
; PUSHJ P,TYI
; EOL RETURN
; NORMAL RETURN
;INPUT: NONE
;OUTPUT: P1 = ASCII CHARACTER
;AC'S USED: P1
;NOTES: (1) THIS ROUTINE WAS DERIVED FROM S. PAAVOLA'S
; ROUTINE OF THE SAME NAME. (WRITTEN 11/1/75)
; TTY DEVICE CALLS WERE CHANGED TO INCHWL'S
; TO SIMPLIFY LOGIC.
; (2) EOL TEST REMOVED. THEREFORE, TYI AND ALL
; ROUTINES THAT USE IT ARE NOT FUNCTIONALLY
; EQUAL TO S. PAAVOLA'S.
TYI: INCHWL P1 ;READ A CHARACTER
CAIN P1,15 ;TEST-CHAR = CR?
JRST TYI ;YES-IGNORE IT
CAIN P1,12 ;TEST-CHAR = LF?
JRST TY20 ;YES-EOL RETURN
AOS (P) ;NO - PRODUCE NORMAL RETURN
TY20: CAIG P1,140 ;[16] TEST - CHAR GT L.C.A?
JRST TY30 ;[16] NO
CAIG P1,172 ;[16] TEST-CHAR LT L.C. Z?
SUBI P1,40 ;[16] YES-CONVERT TO U.C.
TY30: POPJ P, ;[16] RETURN
SUBTTL CONSTANTS AREA
;CONSTANTS
MAXCHL==^D12 ;[22] MAXIMUM EXTERNAL CHANNEL NUMBER
MAXLIN==^D142 ;[18] MAXIMUM INTERNAL LINE NUMBER
MXLINX==^D143 ;[18] MAXIMUM EXTERNAL LINE NO.
STRT==25 ;DAVFU START CODE - W/ PREVIOUS LPI SETTING
START6==26 ; - 6 LINES PER INCH
START8==27 ; - 8 LINES PER ICCH
STOP==126 ;DAVFU STOP CODE
CH1==1 ;SOFTWARE OUTPUT CHANNEL
DLENTH==^D66 ;DEFAULT LENGTH VALUE
DPAGE==^D60 ;DEFAULT PAGE SIZE VALUE
DCHN==10776 ;[22] DEFAULT CHANNEL MASK- CH 1-8,12
DFORM==40 ;DEFAULT FORMS BREAK CHANNE = 5
VLOADP: POINT ^D8,VFUBUF ;BYTE POINTER TO EXTERNAL VFU AREA
SUBTTL MESSAGES
;MESSAGES
M1: ASCIZ /[ALL FORMS BREAK CHANNELS CLEARED]
/
M2: ASCIZ /[PAGE SIZE CHANGED. ALL CHANNELS SHOULD BE REDEFINED]
/
M3: ASCIZ /EXIT
/
M4: ASCIZ /LENGTH = /
M5: ASCIZ /PAGE SIZE = /
;[3] REMOVED M6 - CHANNELS ASSIGNED"
;[4] REMOVED M7 - "MARKING UNASSIGNED CHANNELS"
;[5] CREATED NEW M6
;[6] MODIFIED M6 - OLD M6 = "USE PREVIOUS LPI SETTING"
M6: ASCIZ /LPI VALUE DEFINED BY SWITCH ON LINE PRINTER
/
M8: ASCIZ /FORMS BREAK CHANNELS = /
CRLF: ASCIZ /
/
SP: ASCIZ / /
M9: ASCIZ /LINES /
ASTER: ASCIZ /*/
M10: ASCIZ /LINES PER INCH = /
;[22] ADDED M11,12
;[21] ADDED M13
M11: ASCIZ /NOTE THAT ONLY CHANNELS 1-8 RECOGNIZED BY LP07
/
M12: ASCIZ /CHANNELS 1-8,12 RECOGNIZED BY LP05 AND LP14
/
M13: ASCIZ /[NOTE: PROGRAMMABLE LPI FEATURE NOT SUPPORTED ON LP05 AND LP14]
/
M14: ASCIZ /Assuming "OTHER" i.e doing nothing
/
M15: ASCIZ /Setting CHANNEL 12 BOTTOM
/
M16: ASCIZ /Note: LPI is Currently 0
/
SUBTTL ERROR MESSAGES
;ERROR MESSAGES
;[7] CHANGED ?MAKVFU: TO ?MAK???: TO CONFORM TO DEC CONVENTIONS
;[11] REMOVED UNUSED E2."ILLEG. OCT.NO.".REPLACED W/ WARNING
;[12] REMOVED UNUSED E6. "ILLEG. DEC. NO. " REPLACED W/ WARNING
;[18] CHANGED MAX. LINE NO FROM 144 T0 143. AFFECTED E5,8
;[19] ADDED E17,18
;[22] CHANGED MAX. CHANNEL NO. FROM 8-12
;[21] CHANGED E12 MAX. RANGE TO LENGTH FROM PAGESIZ
;[27] CHANGED E5,12,15 TO CORRESPOND TO MANUAL
E1: ASCIZ /?MAKIFS: ILLEGAL FILE SPECIFICATION
/
E2: ASCIZ /%MAKPEL: PAGE SIZE EXCEEDS LENGTH. LENGTH SET EQUAL TO PAGE SIZE
/
E3: ASCIZ /?MAKCIG: COMMAND IGNORED. GARBAGE AT END OF COMMAND
/
E4: ASCIZ /?MAKICS: ILLEGAL "CHANNEL" SUBCOMMAND
/
E5: ASCIZ /?MAKILE: ILLEGAL "LENGTH" ARGUMENT. RANGE: 1 - 143
/
E6: ASCIZ /%MAKLLP: LENGTH LESS THAN PAGE SIZE. PAGE SIZE SET EQUAL TO LENGTH
/
E7: ASCIZ /?MAKICA: ILLEGAL "CHANNEL" ARGUMENT. RANGE: 1-12
/
E8: ASCIZ /?MAKIPA: ILLEGAL "PAGE" ARGUMENT. RANGE: 1-143
/
E9: ASCIZ /?MAKACD: AMBIGUOUS COMMAND
/
E10: ASCIZ /?MAKICD: ILLEGAL COMMAND
/
E11: ASCIZ /?MAKIEA: ILLEGAL "EVERY" ARGUMENT. RANGE: 1-PAGE SIZE
/
E12: ASCIZ /?MAKILI: ILLEGAL "LINES" ARGUMENT. RANGE: 1 - LENGTH
/
E14: ASCIZ /?MAKOCN: OUTPUT COMMAND NEVER ISSUED.
/
E14A: ASCIZ / TYPE CONT TO PRESERVE INPUT.
/
E15: ASCIZ /?MAKILP: ILLEGAL "LPI" INPUT. ENTER 0,6 OR 8
/
E16: ASCIZ /?MAKCGF: CAN'T GENERATE FILE SPECIFIED
/
E17: ASCIZ /?MAKCBI: CHANNEL 1 BOTTOM IS ILLEGAL.
/
E18: ASCIZ /?MAKLOC: LINE 1 OF CHANNEL 1 MUST BE DEFINED.
/
E19: ASCIZ /?MAKIZA: ILLEGAL "ZERO" ARGUMENT, RANGE: 1-12
/
SUBTTL VARIABLES
LIT
GOLOW ;PUT VARIABLES IN LOW SEGMENT
STK: BLOCK 50 ;STACK AREA - NOT CLEARED BY INIT!
BZCOR:
LINPPG: BLOCK 1 ;LENGTH - DEFAULT =^D66
PAGSIZ: BLOCK 1 ;PAGE SIZE - DEFAULT = ^D60
MARKW: BLOCK 1 ;MARK FLAG - DEFAULT = 0 (IE, NO MARKING)
CHNMSK: BLOCK 1 ;[22]CHANNEL MASK-DEFAULT=10776(CHANNELS 1-8,12)
FORMS: BLOCK 1 ;FORMS BREAK - DEFAULT = 40 (CHANNEL 5)
;BIT 35 = CHANNEL 0, BIT 34 = CHANNEL 1, ETC
;CHANNEL 0 NOT LEGAL. SAME FORMAT FOR FORMS.
CHANEL: BLOCK 1 ;CURRENT CHANNEL NUMBER
TYPENO: BLOCK 1 ;[32] 0=OTHER, 5=LP05/LP14, 7=LP07
;[18] CHANGED MAX LINES FROM 144 TO 143
;[22] CHANGED MAX CHANNEL FROM 8 TO 12
CHNBUF: BLOCK MAXCHL*<MAXLIN/^D36+1> ;ALLOCATE INTERNAL VFU TABLE AREA
; - LINES NUMBERED 0-142
; - CHANNELS NUMBERED 0-11
; - 4 WORDS/CHANNEL = 48 WORDS
; - 143 LINES/CHANNEL
; - 12 CHANNELS/VFU
; - LINE 0 FOR CHANNEL 0 = BIT 0 OF CHNBUF+0
;THE INTERNAL TABLE IS SETUP AS FOLLOWS:
; CHNBUF +0 = CHANNEL 0, WORD 0,LINES 0-35
; 1 0 1 36-71
; 2 0 2 72-107
; 3 0 3 108-142
; 4 1 0 0-35
; 5 1 1 36-71
; 6 1 2 72-107
; 7 1 3 108-142
; 8 2 0 0-35
; . . . .
; . . . .
; . . . .
; 46 11 2 72-107
; 47 11 3 108-142
VFUBUF: BLOCK ^D256 ;ALLOCATE EXTERNAL VFU AREA
; - 8 BIT BYTES
; - 4 BYTES PER 36 BIT WORD
; - BITS 7,8 OF EACH BYTE UNUSED
; - [18] LINE 144 EXTERNAL NEVER USED
;THE FORMAT OF THE EXTERNAL VFU TABLE LOOKS LIKE THIS:
; VFUBUF+0 = BYTE 0, START CODE
; = LINE 1, BYTE 1, CHANNELS 1-6, CH 1=BIT15,CH 6=BIT 10
; LINE 1, BYTE 2, CHANNELS 7-12, CH 7=BIT23,CH 8=BIT 22
; LINE 2, BYTE 3, CHANNELS 1-6, CH 1=BIT31,CH 6=BIT 26
; VFUBUF+1 = LINE 2, BYTE 0, CHANNELS 7-12, CH 7=BIT7,CH 8=BIT 6
; LINE 3, BYTE 1, ..........
; LINE 3, BYTE 2, ..........
; LINE 4, BYTE 3, ..........
; .
; .
; .
; = LINE 143, BYTE 1, CHANNELS 1-6,CH1=BIT15,CH6=BIT10
; = LINE 143, BYTE 2, CHANNELS 7-12,CH7=BIT23,CH8=BIT22
; = BYTE 3, STOP CODE
OLDVFU: BLOCK <MAXLIN/^D36+1> ;4 WORD BUFFER FOR .LINES ERROR RECOVERY
ENDOLD==.-1 ;END OF BUFFER
VFUADR: BLOCK 1 ;VFU ADDRESS FOR ERROR RECOVERY
OFLAG: BLOCK 1 ;OUTPUT FLAG - SET IF OUTPUT COMMAND ISSUED
;DEFAULT = 0
FLINE1: BLOCK 1 ;[19] LINE 1 FLAG - CHECKS FOR C 1 L N(NE 1).
LPI: BLOCK 1 ;LINES PER INCH FLAG
;OPEN FILE BLOCK INFORMATION
OPNBLK: BLOCK 1 ;ASCII MODE (7 BIT)
STR: BLOCK 1 ;FILE STRUCTURE
BUFHDR: BLOCK 1 ;OUTPUT ONLY
BLOCK 1 ;NO INPUT
BUFFO: BLOCK 3 ;BUFFER RING HEADER BLOCK
;ENTER FILE BLOCK INFORMATION
ENTBLK:
FILNAM: BLOCK 1 ;FILE NAME
EXT: BLOCK 1 ;EXTENSION
BLOCK 1
PPN: BLOCK 1 ;P,PN
ZZCOR: BLOCK 1
LIT
END START