Trailing-Edge
-
PDP-10 Archives
-
cust_sup_cusp_bb-x130c-sb
-
10,7/unscsp/sysinf/inflib.mac
There are 5 other files named inflib.mac in the archive. Click here to see a list.
SUBTTL COMMON SUB ROUTINE LIBRARY
SUBTTL T KORTEWEG/DD 11-MAY-78
VWHO==0
VINFL==0
VMINOR==0
VEDIT=114
;COPYRIGHT (C) 1978 DIGITAL EQUIPMENT CORPORATION MAYNARD MASS.
;EDIT HISTORY
;1 RUNNUM HAS BEEN UPDATED TO ALLOW AN INCREASE IN THE RUN NUMBER
; WITHOUT A CHECK OF PASSWORD AND THE LAST TIME CALLED.THIS ENTRY
; WAS MADE FOR DUMPR,WHICH ALLOWS DUMPS TO BE WRITTEN,TODIAGNOSE
; PROBLEMS
;2 SCRASH HAS BEEN CHANGED SO AS NO LONGER TO DESTROY REGISTER
; V INTHE SAVED AREA MOREOVER ALLREGISTERS ARE RESTORED
;3 DUMPR HAS BEEN ADDED TO ALLOW THE WRITING FROM ANY LOCATION
; OF A XPN FILE
;114 FIX SEARCHES TO GO TO UUOSYM & MACTEN INSTEAD OF C.UNV
; FOR SPR 10-29964
;
SEARCH INFSYM
;SAVER SAVES ALL ALL REGISTERS WITH THE EXCEPTION OF THE
;PUSHDOWN LIST ON THE STACK.(NOTE: IT IS ASSUMED THAT THE SYMBOL P
;DEFINES THE PUSHDOWN LIST POINTER.).ONDOING THIS IT ASSUMES
;THAT THE CALLERS RETURN ADDRESS SITS ON THE STACK TOP
;ALL EXITS UP TO A 3 DOUBLE RETURN WILL BE PROPERLY
;HANDLED
;CALL WITH:
; CALL SAVER
;RETURN HERE
; RETURN WILL ACTIVATE THE RESTORATION OF
; ALL REGISTERS
ENTRY SAVER
SAVER: EXCH 0,(P) ;GET CALLERS PC+1
SAVE (ALL) ;SAVE ALL EXCEPT P AND REGISTER ZERO
SAVEI SAVRR ;SAVERS REURN
SAVE 0 ;SET RETURN TO CALLER
RETURN ;AND GO
SAVRR: JSP T1,SVRRR ;(0) NON SKIP RETURN
JSP T1,SVRRR ;(1) SKIP RETURN
JSP T1,SVRRR ;(2) DOUBLE SKIP RETURN
JSP T1,SVRRR ;(3) DOUBLE + SKIP
SVRRR: HRRZS T1 ;CLEAR FLAGS
SUBI T1,SAVRR+1 ;GET THE SKIP VALUE
HRRZ T2,-20(P) ;GET THE CALLERS RETURN ADDRESS
ADD T2,T1 ;AND ADD THE INCREMENT
HRRM T2,-20(P) ;AND SET THE UPDATED RETURN
RESTORE (ALL) ;RESTORE THE CONTEXT P AND 0 NOT!!
RESTORE ;GET R0 BACK
RETURN ;AND EXIT
ENDMOD
SEARCH INFSYM
ENTRY GETCOR
;GETCOR GETS T1 WORDS OF CORE AND RETURNS THE ADDRESS IN V
;ANY FAILLURE TO GET CORE MAKES A NORMAL RETURN
;SUCCESFULL OPERATION IS FLAGGED BY A SKIP RETURN
GETCOR: MOVE V,.JBFF ;GET START OF FREE CORE
SAVE T1 ;SAVE THE AMOUNT REQUESTED
ADDB T1,.JBFF ;ADD THE SIZE WISHED TO IT
CAMG T1,.JBREL ;IS THERE ENOUGH CORE
JRST TPOPJ1 ;YES DO NOT ASK FOR MORE
CORE T1, ;GET IT
JRST TPOPJ ;GIVE A NON SKIP RETURN
JRST TPOPJ1 ;RESTORE T1 AND SKIP RETURN
ENDMOD
SUBTTL LIST OPERATIONS
;THE LIST IS CONTOLLED BY A 2 WORD BLOCK,WHICH HAS THE
;FOLLOWING FORMAT:
;1 WORD 0 POINTER TO FIRST ENTRY,,POINTER TO LAST ENTRY
;2 WORD 1 NUMBER OF ENTRIES IN Q
;EACH PRIMITIVE IS CALLED WITH THE ADDRESS OF THE LISTCONTROL
;BLOCK IN L AND THE ADDRESS OF AN ENTRY IN V
;THE FOLLOWING PRIMITIVES ARE AVAILABLE:
;1 APPEND ARGUMENT V TO LIST
;2 REMOVT REMOVE TOP ELEMENT FROM LIST RETURN ADDRESS INV
;3 REMOVE REMOVE ENTRY V FROM LIST
;4 SREMOV SEARCH .V IN LIST AND REMOVE IT
; 2 RETURNS (NORAML) V NOT IN LIST (SKIP) V REMOVED
SEARCH INFSYM
ENTRY APPEND,REMOVT,REMOVE,SREMOV
LI.LNK=0 ;LINK TO NEXT ELEMENT
LI.NUM=1 ;NUMBER OF ENTRIES IN LIST
;NOTE: THE FIRST WORD OF THE LIST LINKS TO THE REST OF THE LIST
; WITH A FORWARD AND BACKWARD POINTER
;ZERO=NIL TERMINATOR
APPEND: SKIPE LI.NUM(L) ;FIRST ELEMENT
JRST APPEN0 ;NO REALLY APPENDING
MOVE T1,V ;POINT TO THE
HRL T1,V ;THE CURRENT
MOVEM T1,LI.LNK(L) ;SLOT
MOVEI T1,LI.LNK(L) ;AND GET LINK VALUE
JRST APPEN1
APPEN0: HRRZ T1,LI.LNK(L) ;GET PREVIOUS ELEMENT
HRRM V,LI.LNK(L) ;NOW WE ARE OLDEST MEMBER
HRLM V,LI.LNK(T1) ;UPDATE LIST MEMBER
APPEN1: MOVEM T1,LI.LNK(V) ;SET LINK IN LAST ELEMENT
AOS LI.NUM(L) ;ONE MORE IN LIST
RETURN
;REMOVE TOP ELEMENT
REMOVT: HLRZ V,LI.LNK(L) ;GET TOP ELEMENT
;REMOVE GIVEN ELEMENT .V
REMOVE: SOSGE LI.NUM(L) ;ANY MORE IN LIST
JRST REMOV0 ;RAP LINK
HRRZ T1,LI.LNK(V) ;PREVIOUS ONE
HLRZ T2,LI.LNK(V) ;RESET ONE
HRLM T2,LI.LNK(T1) ;UPDATE ANCHOR OR BUCKET
SKIPN T2 ;IF LIST IS TERMINATED THEN ELSE
MOVE T2,L ;ELSE CHANGE THE LAST MEBER
HRRM T1,LI.LNK(T2) ;UPDATE BACKWARD POINTER
RETURN
REMOV0: SETZM LI.NUM(L) ;THE LIST IS EMPTY
SETZM LI.LNK(L) ;RAP BACKWARD
RETURN
;SEARCH .V IN LIST AND REMOVE IT IF PRESENT
SREMOV: JUMPE V,CPOPJ
MOVE T1,L ;COPY THE LIST ADDRESS
SREMO0: HLRZ T1,LI.LNK(T1)
JUMPE T1,CPOPJ
CAME T1,V
JRST SREMO0
MOVE V,T1
CALL REMOVE
JRST CPOPJ1
ENDMOD
SUBTTL FREE LIST MANAGEMENT
COMMENT &
GETBLK GETS A FREE BLOCK IN V AND GIVES A SKIP RETURN
A NORMAL RETURN IS GIVEN WHEN NO MORE CORE IS AVAILABLE
CORE IS ALLOCATED IN PAGES OR KAYS OF CORE.
NOTE: 1. THAT GETBLK IS SELF INITIALIZING, THE INITIALIZATION
CODE ONLY SETS PAGE OR KAY DATA.
2. VARIABLE LOADED TRIES TO INFLUENCE THE BEHAVIOUR
OF SYS:INFO BY STOPPING THE ACCEPTANCE OF MESSAGES
RETBLK RETURNS THE BLOCK IN V TO THE FREE LIST
INIBLK DOES THE FIRST THINGS AS LITTLE AS POSSIBLE!!
&
KAYSIZ=1777 ;NUMBER OF WORDS PER KA
PAGSIZ=0777 ;NUMBER OF WORDS PER PAGE
SEARCH UUOSYM,MACTEN,INFSYM ; [114] FIX SEARCHES
ENTRY BLKINI,GETBLK,GETTWO
ENTRY RETBLK,RETTWO
ND FTDEBUG,0
ND FTFLOW,0
LI.SLN=1 ;SUBLINK FOR TWIN BLOCKS
;V CONTAINS SIZE OF SLOTS IN LIST STRUCTURE
BLKINI: MOVEM V,LISIZ ;SAVE THE SIZE OF THE BUCKETS
SETZM FRELNK ;INITIALIZE CONTROL
SETZM FRENUM ;BLOCK
MOVEI T1,KAYSIZ ;AND INITIALIZE
JUMPPT T2,,BLKIN0 ;EXPANSION DATA
MOVEI T1,PAGSIZ ;ACCORDING TO PROCESSOR
BLKIN0: IDIVI T1,(V) ;DIVIDE BY SIZE OF SLOTS
MOVEM T1,BCKPKP ;AS PAGES ARE BETTER
IMULI T1,(V) ;THEN KAYS TO EXPAND
MOVEM T1,BCKPKS
RETURN
GETBLK: SOSL V,FRENUM ;ARE ANY BUCKETS AROUND
JRST GETBL2 ;YES TAKE ONE
IFN FTFLOW,<
SAVE V
MOVEI V,CORMS1 ;GET TEXT TO PRINT
CALL TYPOPB## ;TYPE THE TEXT
JFCL ;AND IGNORE FAILLURE
RESTORE V
JRST NCOR1 ;SKIP THE TEXT
CORMS1: ASCIZ /MORE CORE WAS REQUESTED]
/
NCOR1:
>
MOVE T1,BCKPKS ;CHUNK
CALL GETCOR ;GET T1 WORDS
RETURN ;HAND THE PROBLEM TO THE CALLER
MOVE T2,V ;GET POINTER TO NEW CHUNK
EXCH T2,FRELNK ;SET ANCHOR ADDRESS TO IT
MOVE T3,BCKPKP ;# OF BUCKETS PER PAGE OR K
GETBL1: MOVE T4,V ;LET T4 POINT TO OLD SLOT
ADD V,LISIZ ;ADDRESS OF NEXT SLOT
SOSG T3 ;IF LAST BUCKET IN NEW CHUNK THEN
MOVE V,T2 ;TAKE OLD ANCHOR CONTENT
MOVEM V,(T4) ;POINT TO SUCCESSOR
JUMPG T3,GETBL1 ;DO THIS FOR ALL BUCKETS
MOVE V,BCKPKP ;GET THE NUMBER OBTAINED
ADDB V,FRENUM ;AND SET THE NUMBER IN THE LIST
IFN FTDEBUG,<
WARN DO,<THERE ARE: >
MOVE T3,FRENUM
CALL PROC0
WARN DO,< (OCTAL) FREE ELEMENTS .THEY ARE:
>
SAVE <T1,T2,T3,T4>
MOVE T1,FRELNK ;FIRST FREE SLOT
TT..: WARN DO,<
>
MOVEI T2,5 ;5 PER LINE
SAVE T2
TT0..: MOVE T2,T1 ;PRINT IT
CALL PROCT
MOVE T1,(T1)
JUMPE T1,TT1..
SOSE (P) ;COUNT ON THE STACK
JRST TT2..
RESTORE T2
JRST TT..
TT2..: WARN DO,< >
JRST TT0..
TT1..: WARN DO,<
>
RESTORE T1
RESTORE <T4,T3,T2,T1>
WARN DO,<
>> ;END OF IFN FTDEBUG
GETBL2: MOVE V,FRELNK ;GET THE FIRST FREE BUCKET
MOVE T1,(V) ;AND ITS SUCCESSOR
MOVEM T1,FRELNK ;GOES TO THE ANCHOR
HRL T1,V ;MAKE A
HRRI T1,1(V) ;BLT POINTER
SETZM (V) ;TO ZAP SLOT
MOVE T2,V ;START OF FREE SLOT
ADD T2,LISIZ ;ONE TOO FAR!!
BLT T1,-1(T2) ;SO NO HISTORY IS PASSED
JRST CPOPJ1
SUBTTL GET A PAIR OF FREE BLOCKS
GETTWO: CALL GETBLK ;GET ONE BLOCK
RETURN ;NO ONE THERE
SAVE V ;DO NOT LOOSE IT
CALL GETBLK ;AND GET A SECOND ONE
JRST GETTW0 ;JUST A FAILLURE
HRLZ T1,(P) ;GET THE FIRST BLOCK'S ADDRESS
MOVEM T1,LI.SLN(V) ;AND LINK THE BLOCKS
RESTORE W ;GET THE PAIRED REGISTER
JRST CPOPJ1 ;ALL IS THERE
GETTW0: RESTORE V ;GET THE FIRST BLOCK BACK
CALL RETBLK ;RETURN THE BLOCK
RETURN
SUBTTL RETURN FREE CORE
;CALLED WITH THE ADDRESS OF THE BLOCK
;TO BE RETURNED IN V
RETBLK:
IFN FTDEBUG,<
CALL TRACKV ;TRACE CALS AND V VALUE
SKIPE V ;RETURNING AZERO LINK
JRST ..RET0 ;NO
WARN DO,<A ZERO BLOCK IS RETURNED>
HALT
>
..RET0:
IFN FTDEBUG,<
MOVEI T1,L.FREE ;GET POINTER TO FRE LIST
..RET3: CAME T1,V ;MAKING THE LIST CIRCULAR
JRST ..RET4 ;NOT YET
WARN DO,<FREE LIST IS BEING MADE CIRCULAR>
HALT
..RET4: SKIPE T1,(T1)
JRST ..RET3 ;THERE IS MORE ON THE LIST
>
MOVE T1,FRELNK ;GET CURRENT TOP OF LIST
MOVEM V,FRELNK ;REPLACE TOP ADDRESS
MOVEM T1,(V) ;MAKE RETURNED BLOCK THE TOP ONE
AOS T1,FRENUM ;ONE MORE FREE
IFN FTDEBUG,<
;INSPECT THE FREE LIST
SAVE <T1,T2,T3>
MOVE T1,FRENUM ;THE NUMBER OF FREE ELEMENTS
MOVEI T2,L.FREE ;THE FREE LIST
SETZM T3 ;ZAP T3
..RET1: SKIPE T2,(T2) ;LAST ONE
AOJA T3,..RET1 ;NO COUNT IT
CAMN T3,T1 ;IDENTICAL?
JRST ..RET2 ;YES FORGET IT
WARN DO,<DISCREPANCY BETWEEN ACTAUL FREE AND ACCOUNTED AS FREE>
HALT
..RET2: RESTORE <T3,T2,T1>
>
RETURN
;RETTWO IS THE INVERSE FUNCTION OF GETTWO
;THE ADDRESS OF THE TWIN BLOCK IS IN V
RETTWO: SAVE V ;SAVE THE BASE ADDRESS
HLRZ V,LI.SLN(V) ;GET THE BROTHER
IFN FTDEBUG,<
SKIPN V ;IS IT OKAY OR
CALL WRNBLN ;IT IS MESSED UP
>
CALL RETBLK ;AND DELETE HIM
RESTORE V ;GET THE OTHER BROTHER
PJRST RETBLK ;AND RETURN HIM TOO
FRELNK: EXP 0 ;FIRST FREE ELEMENT
FRENUM: EXP 0 ;NUMBER OF FREE ELEMENTS
LISIZ: EXP 0 ;NUMBER OF FREE ELEMENTS
BCKPKP: EXP 0 ;NUMBER OF BUCKETS PER PAGE
BCKPKS: EXP 0 ;SIZE OF AN EXTENSION OF THE LIST
ENDMOD
SUBTTL PRINTERS
SEARCH INFSYM
ENTRY PRDEC,PRDECH,PROCT,PROCTH
;PRDEC PRINTS THE CONTENT OF V IN DECIMAL SUPPRESSING LEADIND NULS
;PRDECH PRINTS THE RIGHT HAND SIDE OF V IN DECIMAL
;PROCT PRINT THE CONTENT OF V IN OCTAL (L,,R FORMAT)
;PROCTH PRINTS THE RIGHT HAND SIDE OF V IN OCTAL
PRDEC: SKIPA T1,V ;COMPLETE V WILL BE PRINTED
PRDECH: HRRZ T1,V ;ONLY THE RIGHT HAND SIDE
MOVEI T3,^D10 ;RADIX IS DECIMAL
JRST PRANY ;PRINT ANY RADIX
PROCT: HLRZ T1,V ;GET THE LEFT HAND SIDE
CALL PROC0 ;PRINT IT
MOVEI T1,.CHCOM ;A COMMA SEPERATES
WARNCH DO,T1 ;PRINT ONE
WARNCH DO,T1 ;AND ANOTHER ONE
PROCTH: HRRZ T1,V ;PRINT ONLY THE RIGHT HAND SIDE
PROC0: MOVEI T3,^D8 ;PRINT IN OCTAL
;AND FALL INTO PRANY
PRANY: IDIVI T1,(T3) ;GET A DIGIT
SAVE T2 ;SAVE THE DIGIT
SKIPE T1 ;ALL DONE??
CALL PRANY ;NO PRINT MORE
RESTORE T2 ;GET THE DIGIT BACK
ADDI T2,.CHZRO ;MAKE IT ASCII
WARNCH DO,T2 ;TYPE THE CHARACTER
RETURN
ENDMOD
SEARCH INFSYM
ENTRY PR6BIT
;A SIXBIT PRINTER
;PRINT THE VALUE IN V INSIXBIT
SIXBAS=40
PR6BIT: MOVE T1,V ;COPY THE VALUE
PR6BI0: SETZ T2, ;ZERO BIT GENERATOR:
ROTC T1,6 ;GET FIRST BYTE
ADDI T2,SIXBAS ;MAKE IT PRINT TABLE
TTCALL 1,T2 ;PRINT IT
JUMPN T1,PR6BI0 ;PRINT NEXT BYTE
RETURN
ENDMOD
SUBTTL CRASH
SEARCH UUOSYM,MACTEN,INFSYM ; [114] FIX SEARCHES
ENTRY CRASH,STCRSH,DUMPR
;STCRSH PREPARE DATA FOR ENTERING A CRASH FILE
;CALLED WITH ADDRESS OF CRASH FILE NAME IN V
;THIS CALL ENABLES CRASH CALLS
STCRSH: JUMPE V,CPOPJ ;DON'T FOOL ME
MOVEM V,CRSHNM ;REMEMBER THE NAME
JRST CPOPJ1 ;AND EXIT
;CRASH CAN BE CALLED FROM ANY PLACE AND WILL DUMP
;THE CURRENT CORE IMAGE UP TO .(.JBFF) (SEE HOW BAD ARE DOTS BLIS-10)
;HAIL ALGOL-68 WITH REF
;THE DUMP WILL RELEASE CHANNEL 0.THE NAME GIVEN TO THE DUMP FILE
;WILL BE DETERMINED BY THE ENTER BLOCK WHOSE ADDRESS IS PASSED BY
;THE CALLER IN REGISTER V.
;THE FILE WILL BE WRITTEN ON GENERIC DSK IN MODE 17
;WHAT EVER THE DEVICE IS . THE DEVSIZ UUO WILL BE USED TO FIGURE
;OUT THE DEVICE BUFFER SIZE.THE REGISTERS ON ENTRY ARE
;STORED IN AREA STARTING AT CRSH0
;NOTE THAT ONLY T REGISTERS ARE BLOWN
CRASH:: SKIPN CRSHNM ;IS THERE A NAME??
RETURN ;(NO) DO NOT DUMP
MOVEM .CRSH0 ;CRASH ACC 0
MOVEI .CRSH1 ;HERE IT GOES
HRLI 1 ;STARTING WITH REGISTER 1
BLT .CRS17 ;ALL ACCS
MOVE V,CRSHNM ;NAME OF CRASH BLOCK
HRLZ T1,.JBFF## ;SAVE THE LOW PART OF CORE
HRRZ T2,.JBFF ;SEE IF WE HAVE ENOUGH CORE
SETZ T4, ;MODE 0 FOR DEVSIZ
MOVSI T5,(SIXBIT /DSK/) ;DISK IS OUR DEVICE
MOVEI T3,T4 ;GET ADDRESS OF ARGUMENT LIST
DEVSIZ T3, ;TRY TO GET DEVSIZ
RETURN ;TO BAD YOU LOOSE
MOVEI T3,-3(T3) ;SUBTRACT HEADER
MOVN T4,T3 ;GET LENGTH MINUS
MOVE T5,T3 ;AND COPY BLOCK LENGTH
ADD T2,T3 ;THIS MUCH WE NEED
CAMG T2,.JBREL## ;IS THERE ENOUGH CORE??
JRST COROK ;NO PROBLEM
CORE T2, ;ASK FOR MORE
HALT ;WHAT TO DO ELSE?? LATER
COROK: HRRZ T2,.JBFF ;START OF FREE AREA
SETZM (T2) ;ZAP THE START
HRRI T1,1(T2) ;TARGET ADDRESS
ADDI T3,-1(T2) ;POINT TO END OF AREA
BLT T1,(T3) ;ZAP
HRLI T1,.JBPFI##+1 ;START OF UNPROTECTED AREA
HRRI T1,.JBPFI+1(T2) ;START IN TARGET AREA
BLT T1,(T3) ;COPY NON PROTECTED DATA
RELEASE 0 ;NO MATTER WHAT IS GOING ON THERE
OPEN 0,(V) ;OPEN USER'S DEVICE
RETURN ;SORRY YOU LOOSE
ENTER 0,3(V) ;USE CALLERS BLOCK
RETURN ;LOOSER AGAIN
HRL T1,T4 ;GET MINUS BLOCK LENGTH
SETZM T2 ;ZAP END OF IOWD LIST
HRR T1,.JBFF ;START OF IOWD AREA
SUBI T1,1 ;ONE WORD BEFORE START
OUTPUT T1 ;WRITE PART WITH DATA <JOBPFI
HRRZ T1,.JBFF ;GET FIRST FREE LOCATION
ADD T1,T4 ;SUBTRACT BLOCK SIZE
JUMPL T1,CRSML ;A VERY SMALL CRASH ONLY
MOVNS T1 ;MINUS NUMBER OF WORDS STILL TO GO
HRLS T1 ;MAKE A NEW IOWD
HRRI T1,-1(T5) ;START AFTER FIRST BLOCK
OUTPUT T1 ;AND WRITE LAST PART OF CORE IMAGE
CRSML: RELEASE 0, ;WRITE EOF
RESTAC: MOVSI 17,.CRSH0 ;GET SOURCE TARGET POINTER
BLT 17,16 ;LAST ONNE RESTORED IS 16
MOVE 17,.CRS17 ;AND GET REGISTER 17 BACK
JRST CPOPJ1 ;HAPPY CALLER
;DUMPR USED TO DUMP THE CURRRENT CORE IMAGE
DUMPR: SETOM DMPFLG ;FLAG WE ARE DOING THE DUMP
CALL CRASH ;JUST USE CRASH TO SAVE STUFF
RETURN ;FAILLURE EXIT
SETZB V,DMPFLG ;ZAP V
CALL RUNNUM ;UPDATE THE RUN NUMBER
JRST RESTAC ;IGNORE THE PROBLEM
MOVE V,CRSHNM ;GET ADDRES OF NAME BLOCK
HRRM T1,3(V) ;AND UPDATE THE NAME
CALL SIXNUM ;CONVERT TO SIXBIT
JRST RESTAC ;RESTORE ACCS AND RETURN
DMPFLG: Z ;-1 WHEN DUMPER DUMP
;AREA TO SAVE ACC'S ON A CRASH
CRSHNM: Z ;ADDRESS OF CRASH FILE NAME
.CRSH0: Z ;SAVE ACC 0 HERE
.CRSH1: Z ;SAVE ACC 1 HERE
BLOCK 15 ;SAVE ACC2 TILL ACC 16 HERE
.CRS17: Z ;SAVE ACC 17 HERE
ENDMOD
SUBTTL TYPOPR
SEARCH UUOSYM,MACTEN,INFSYM ; [114] FIX SEARCHES
ENTRY TYPOPR,SETOPR,SETUDX,TYPOP0,TYPOPB
;SETOPR ALLOWS OUTPUT TO ANY TERMINAL VIA TRMOP OPRATIONS
;FIRST CALL SETOPR WITH THE FOLLOWING PARAMETERS:
;.T1 TTY YOU WANT E.G. TTY10(IN SIXBIT)
;.V ZERO OR ADDRESS OF ASCIZ TEXT TO START EVERY OUTPUT
;IN CASE YOU KNOW THE UDX OF THE TERMINAL CALL SETUDX
;WITH UDX IN T1
;RETURNS FALSE AND TRUE
SETOPR::CALLI T1,127 ;WAIT FOR BETTER C FILE
; IONDX. T1, ;TRY TO GET IT
RETURN ;YOU LOOSE
SETUDX::MOVEM T1,.TXTX ;STORE THE INDEX
MOVEM V,.TXTH ;REMEMBER PREFIX
JRST CPOPJ1 ;LUCKY YOU
;TYPOPR TYPES ON THE CTY PROVIDED THE FACT THAT YOU
;HAVE THE PRIVILIGE TO DO SO.
;TYPOPB TOO TYPOPR PRECEDES TEXT BY ?? AND OPB BY]]
;CALL TYPOPR WITH THE ADDRESS OF THE STRING TO BE TYPED
;IN REGISTER V. THIS FUNCTION IS AN EMERGENCY FOR SYSTEM
;PROGRAMS,WHICH ARE IN PAIN AND ARE SO UNLUCKY TO BE
;TO BE DETACHED. TO WAKE SLEEPY OR TOO BUSY OPERATORS
;YOY MIGHT ADD SOME BELLS.
;IF YOU LOOSE A NORMAL RETURN ELSE THE HAPPY TRUE EXIT
TYPOPB::SKIPN .TXTX ;HAS I/O INDEX BEEN SET UP
RETURN ;NO FORGET IT
MOVEI T1,LFTSQB ;LEFT SQUARE BRACKETS
JRST TYPOP1 ;TYPE THEM
TYPOPR::SKIPN .TXTX ;HAS I/O INDEX BEEN SET UP
RETURN ;YOU LOOSE
MOVEI T1,QUESTM ;GET ?? TEXT
TYPOP1: MOVEM T1,.TXTA ;SET UP FOR PRINTING
MOVE T1,.TXT0 ;GET TRMOP CTL BLOCK
TRMOP. T1, ;PRINT IT
RETURN ;YOU ARE BAD
SKIPN T1,.TXTH ;ANY PREFIX FOR SENTENCE?
JRST NOPREF ;NONE SO DON'T PRINT
MOVEM T1,.TXTA ;YES LET IT GO FIRST
MOVE T1,.TXT0 ;GET TRMOP CTL BLOCK
TRMOP. T1, ;TRY TO GET MESSAGE ACROSS
RETURN ;NO YOU ARE A BAD GUY
TYPOP0::
NOPREF: MOVEM V,.TXTA ;TEXT ADDRESS
MOVE T1,.TXT0 ;GET TRMOP CTL BLOCK
TRMOP. T1, ;TRY TO GET IT ACROSS
RETURN ;HE DID NOT GET IT
JRST CPOPJ1 ;HAPPY ME
.TXT0: 3,,.TXT ;NO LITERAL PROBLEMS
.TXT: EXP .TOOUS ;WRITE
.TXTX: Z ;I/O INDEX COMES HERE
.TXTA: Z ;ADDRESS OF ASCIZ STRING COMES HERE
.TXTH: Z ;ADDRSS OF MESSAGE PREFIXES
LFTSQB: ASCIZ /[/ ;INNOCENT TEXTS
QUESTM: ASCIZ /??/ ;PROBLEM REPORTERS
ENDMOD
SUBTTL SETSTA
SEARCH UUOSYM,MACTEN,INFSYM ; [114] FIX SEARCHES
ENTRY SETSTA,RESTAR
;SETSTA AND RESTAR ARE CONJUGATE ROUTINES
;THIS MEANS SETSTA PREPARES THE RESTART OF A PROGRAM
;AND RESTAR RERUNS THE PROGRAM.
;TO ENABLE RESTARTING CALL SETSTA IMMEDIATELY
;AFTER SETTING UP A STACK AND NOT USING A RUN ACCU
;AS A STACK POINTER PLEASE.THIS WILL ENABLE RESTAR
;CALING RESTAR CAN RESULT IN:
;1 A RETURN IF THE RESTAR LOOSES
;2 NO RETURN WHEN THE PROGRAM WAS RESTARTED
;NOTE: THAT THE JOB WILL ATTACH TO THE CTY WHENEVER THE CONTROLLING
;LINE NUMBER HAS CHANGED , THIS IS TO GET DAEMON BACK ON THE AIR
SETSTA::0 ;NO STACK PROBLEMS PLEASE
SETOM .RESTF ;SET THE BOOLEAN TO ENABLE RESTART
MOVEM .SGNAM,RUNNAM ;REMEMBER THE NAME
MOVEM .SGPPN,RUNPPN ;AND PPN
MOVEM .SGDEV,RUNDEV ;AND DEVICE
MOVEM .SGLOW,RUNEXT ;AND EXTENSION
JRST @SETSTA ;RETURN
RESTAR::SKIPL .RESTF ;ARE WE ENABLED
RETURN ;NO FORGET IT
MOVEI T1,RUNDEV ;RUN DEVICE
HRLI T1,2 ;IDENTIFY THE RESTART
RUN T1, ;MAYBE YOU GO
MOVE T1,[SIXBIT /DAEMON/] ;CHANGE NAME IF TRUE
CAME T1,RUNNAM ;ELSE EXITS DO NOT WORK
RETURN
HLLZS T1 ;GET DAE NAME
SETNAM T1, ;SET THE NAME
RETURN
.RESTF: Z ;IMPURE RESTART FLAG
RUNDEV: Z ;NAME OF RUN DEVICE
RUNNAM: Z ;NAME OF RUN DEVICE
RUNEXT: Z ;NAME OF EXTENSION
Z
RUNPPN: Z ;OWNERS PPN
Z ;NO CORE ARGUMENT
ENDMOD
; SEARCH UUOSYM,MACTEN,INFSYM ; [114] FIX SEARCHES
DOINT (ILU) ;SET ILLEGAL USER TRAP
; SEARCH UUOSYM,MACTEN,INFSYM ; [114] FIX SEARCHES
DOINT (ILM) ;SET ILLEGAL MEMORY TRAP
; SEARCH UUOSYM,MACTEN,INFSYM ; [114] FIX SEARCHES
DOINT (ADC) ;SET ADDRESS CHECK TRAP
; SEARCH UUOSYM,MACTEN,INFSYM ; [114] FIX SEARCHES
DOINT (PDL) ;PUSH DOWN LIST TRAP
; SEARCH UUOSYM,MACTEN,INFSYM ; [114] FIX SEARCHES
DOINT (NXM) ;NONEXISTING MEMORY TRAP
; SEARCH UUOSYM,MACTEN,INFSYM ; [114] FIX SEARCHES
DOINT (EJE) ;EXTERNAL JOB ERROR
SUBTTL RUNNUM
ENTRY RUNNUM,ZAPRUN
SEARCH UUOSYM,MACTEN,INFSYM ; [114] FIX SEARCHES
;RUNNUM IS CALLED TO FIGURE IT HOW MANY TIMES
;A PROGRAM HAS BEEN RUN AND TO INCREASE THE RUN NUMBER
;THERE ARE 2 CALLS:
;1 A CALL TO JUST UPDATE THE RUN NUMBER (.V EQL 0)
;2 A CALL TO UPDATE THE NUMBER AND CHECK THE LEGALALITY
; OF THE USER AND VERIFY WHTHER THE RERUN WAS 'TOO SOON'
;THIS IS DONE BY WRITING A TEMP FILE WITH THE NAME
;XXX'XXX.TMP XXX=JOB NUMBER IN 6 BIT
;AND CHECKING A PROGRAM PASSWORD
;TO PREVENT AN INFINITE LOOP THE CURRENT TIME HAS TO EXCEED
;A USER SPECIFIED MARGIN IN MILLISECONDSZERO VALUES WILL BE
;REJECTED.
;TO USE THIS FACILITY (2) THE USER MUST CALL RUNNUM WITH
;THE ADDRESS OF A PARAMETER BLOCK IN V,
;THE LAY OUT OF THIS PARAMETER BLOCK IS:
;WORD 0 THIS WILL BE USED TO CHECK THE TMP FILE(PASSWORD)
;WORD 1 THIS WILL BE SET TO THE START NUMBER OF THE RUN
;WORD 2 CONTAINS THE MINIMUM TIME DELTA BETWEEN SUCCESSIVE RUNS
RUNNUM: SAVE V ;PARAMETER BLOCK
PJOB V, ;GET JOB NUMBER
CALL SIXNUM ;CONVERT IT
JRST TPOPJ ;GO BACK WRONG!
RESTORE V ;GET PARAMETER BLOCK ADDRESS BACK
HRLZM T1,NAME ;STORE NAME PART
MOVEI T1,NAME ;POINT TO ARG BLOCK
HRLI T1,.TCRRF ;READ FUNCTION
TMPCOR T1, ;GET RESULT INT2,T3,TT4,T5
JRST NEW ;FIRST RUN
SKIPN V ;VERIFICATION REQUIRED?
AOJA T3,WRFILE ;NO WRITE THE FILE AGAIN
CAME T2,(V) ;IS PASSWORD OKAY?
JRST NEW ;(NO) MUST BE NEW
;THIS IS CLEARLY A RESTART
ADDI T3,1 ;INCREASE SEQ NUMBER
DATE T1, ;GET THE DATE
CAMN T1,T4 ;THE SAME DAY??
JRST SAMED ;(YES) CHECK TIME
MOVE T4,T1 ;RESET DAY
MSTIME T5, ;GET TIME
JRST WRFILE ;WRITE THE NEW FILE
SAMED: MOVE T1,2(V) ;GET THE ALLOWABLE DIFFERENCE
JUMPE T1,CPOPJ ;THERE MUST BE A DIFFRENCE
ADD T1,T5 ;GET OLD TIME
MSTIME T5, ;GET THE CURRENT TIME
CAMGE T5,T1 ;IS INTERVAL PERMISSIBLE??
RETURN ;CRASH DIFFERENCE IS TOO SMALL
JRST WRFILE ;WRITE IT AGAIN
NEW: MOVE T2,(V) ;GET PASSWORD
SETZ T3, ;ZAP SEQ #
DATE T4, ;GET THE DATE
MSTIME T5, ;AND TIME
WRFILE: MOVSI T1,.TCRWF ;WRITE THE FILE
HRRI T1,NAME
TMPCOR T1, ;DELETE PREVIOOUS VERSION
RETURN ;TOO BAD
SKIPN V ;VERIFICATION CALL?
SKIPA V,T3 ;NO RETURN RUN VALUE
MOVEM T3,1(V) ;STORE THE SEQUENCE NUMBER
JRST CPOPJ1 ;THAT'S ALL
;ZAPRUN ZAPS THE TMPCOR FILE
;THEREBY MAKING REFINDING OF OLD RUN DATA IMPOSSIBLE
ZAPRUN: PJOB V, ;GET JOB NUMBER
CALL SIXNUM ;GET THE JOB NUMBER IN 6 BIT
RETURN ;YOU HAD A BAD NUMBER BOY
HRLZM T1,NAME ;SET NAME FIELD
HRRI T1,NAME ;POINT TO ARG BLOCK
HRLI T1,.TCRDF ;READ AAND DELETE FILE
TMPCOR T1, ;ZAP IT
RETURN
JRST CPOPJ1 ;ALL SET SIR
NAME: Z ;NAME,,0 FOR TMPCOR UUO
IOWD 4,T2 ;READ INTO ACCUS
ENDMOD
SUBTTL SIXNUM
ENTRY SIXNUM
SEARCH INFSYM
;CONVERT THE BINARY IN ACCU V IN A STRING OF ALPHANUMERICS
;THE NUMBER IS HAS LESS THAN 6 DIGITS!!
;THE STRING IS RETURNED IN T1
;THE ERROR RETURN IS GIVEN IF THE NUMBER HAS MORE THAN 6 DIGITS
;THE STRING IS RIGHT ADJUSTED WITH LEADING SIBIT ZERO
SIXNUM: TLNE V,-1 ;AN ILLEGAL NUMBER??
RETURN ;(YES) GIVE THE FALSE RETURN
MOVE T2,[POINT 6,T1] ;GET POINTER TO T1
MOVE T3,[POINT 3,V,17] ;GET POINTER TO BINARY
SIXNU0: ILDB T4,T3 ;GET A DIGIT
ADDI T4,20 ;MAKE IT 6 BIT
IDPB T4,T2 ;STORE THE CHARACTER
TLNE T2,770000 ;FILLED THE WORD??
JRST SIXNU0 ;NO FILL MORE
JRST CPOPJ1 ;SKIP RETURN
ENDMOD
SEARCH INFSYM
ENTRY CPOPJ2,CPOPJ
ENTRY TPOPJ2,TPOPJ1,TPOPJ
ENTRY VPOPJ
TPOPJ2: POP P,T1
CPOPJ2: AOSA (P)
TPOPJ1: POP P,T1
AOSA (P)
TPOPJ: POP P,T1
CPOPJ: POPJ P,
VPOPJ: POP P,V ;RESORE V
RETURN ;AND RETURN
ENDMOD
SUBTTL CPOPJ1
ENTRY CPOPJ1
SEARCH INFSYM
;PREVENT GLOBAL CONFLICT WITH SCANER
CPOPJ1: AOS (P) ;RETURN +1
RETURN
ENDMOD
SUBTTL ERROR
ENTRY ECOD7,ECOD6,ECOD5,ECOD4,ECOD3,ECOD2,ECOD1,ECOD0
SEARCH INFSYM
;GIVE ERROR VALUES BACK IN REGISTER T1,THIS PRESERVES V!
ECOD7: JSP T1,ECO0 ;ZERO BASE
ECOD6: JSP T1,ECO0
ECOD5: JSP T1,ECO0
ECOD4: JSP T1,ECO0
ECOD3: JSP T1,ECO0
ECOD2: JSP T1,ECO0
ECOD1: JSP T1,ECO0
ECOD0: JSP T1,ECO0
ECO0: HRRZS T1 ;ZAP PROCESSOR FLAGS
SUBI T1,ECO0 ;REDUCE THE PC
RETURN
ENDMOD
END