Trailing-Edge
-
PDP-10 Archives
-
de-10-omona-v-mc9
-
scnser.mac
There are 14 other files named scnser.mac in the archive. Click here to see a list.
TITLE SCNSER - TERMINAL SCANNER SERVICE FOR 6.03 MONITORS V21400
SUBTTL R CLEMENTS/RCC/DAL/PMW/EJW 30 NOV 78
SEARCH F,S
$RELOC
$HIGH
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1973,1974,1975,1976,1977,1978 BY DIGITAL EQUIPMENT CORP., MAYNARD, MASS.
XP VSCNSR,21400
ENTRY SCNSER
SCNSER::
; TABLE OF CONTENTS FOR SCNSER
;
;
; SECTION PAGE
; 1. PARAMETER AND CONFIG DEFINITIONS.......................... 2
; 2. DATA STRUCTURES
; 2.1 LINTAB AND DSCTAB................................. 4
; 2.2 LINE DATA BLOCK (LDB)............................. 5
; 2.3 TTY DEVICE DATA BLOCK (DDB)....................... 14
; 3. TRANSMIT INTERRUPT ROUTINE................................ 15
; 4. RECEIVE INTERRUPT ROUTINE................................. 21
; 5. KA10 CONSOLE TELETYPE SERVICE............................. 40
; 6. FILLERS AND SIMULATION ROUTINES........................... 41
; 7. TIMING ROUTINE............................................ 50
; 8. SUBROUTINES FOR INTERRUPT LEVEL CODE...................... 55
; 9. CHUNK HANDLERS
; 9.1 READ FROM BUFFER.................................. 64
; 9.2 STORE INTO BUFFER................................. 65
; 9.3 FREE A CHUNK...................................... 67
; 9.4 GET A CHUNK FROM FREELIST......................... 67
; 9.5 CLEAR BUFFERS..................................... 68
; 10. UUO LEVEL ROUTINES FOR BUFFERED I/O....................... 69
; 11. DDT MODE CALLI'S.......................................... 76
; 12. TTCALL AND TRMOP.
; 12.1 TTCALL DISPATCH................................... 77
; 12.2 OUTCHR AND IMAGE OUTCHR........................... 79
; 12.3 OUTSTR AND RESCAN................................. 80
; 12.4 SKPINL AND SKPINC................................. 81
; 12.5 GETLIN............................................ 82
; 12.6 SETLIN, INCHSL, INCHWL, INCHRS & INCHRW........... 83
; 12.7 TRMNO. UUO........................................ 84
; 12.8 TRMOP. DISPATCH................................... 85
; 12.9 SKIPS AND CLEARS.................................. 93
; 12.10 TRMOP. I/O........................................ 94
; 12.11 TRMOP. I/O SUBROUTINES............................ 95
; 12.12 TRMOP. DATASET FUNCTIONS.......................... 96
; 13. SUBROUTINES FOR I/O....................................... 99
; 14. COMMAND LEVEL ROUTINES.................................... 107
; 15. SUBROUTINES FOR COMCON OR UUO LEVEL....................... 120
; 16. ROUTINES FOR PTY.......................................... 139
; 17. IMPURE DATA............................................... 142
SUBTTL PARAMETER AND CONFIG DEFINITIONS
XP STTYBF,20
;DATASET TRANSACTION CODES FROM SCNSER TO/FROM XXXINT'S
XP DSTOFF,1 ;DSCREC OR DSCTYP
XP DSTON,2 ;DSCREC OR DSCTYP
XP DSTRNG,3 ;DSCREC
XP DSTREQ,3 ;DSCTYP
XP DSTINI,4 ;TO AND FROM. SENDING COMPUTER WAS RESTARTED.
XP DSTSTS,5 ;REQUEST DATA SET STATUS
XP DSTCRQ,10 ;CALL REQUEST TO MODEM. WANT TO DIAL OUT.
XP DSTPND,20 ;PRESENT NEXT DIGIT, TO AND FROM.
; NOTE - TO MODEM, 20-37 MEAN SEND DIGIT N-20
; WHERE DIGIT 17 MEANS END OF NUMBER (TO BOTH HARDWARE AND SOFTWARE)
; AND DIGIT 16 MEANS 5-SECOND DELAY TO SOFTWARE, FOR SECOND DIAL TONE.
XP DSTNAC,40 ;NO ACTION -SYSINI (ONLY USER OF DSTREQ) SHOULD
; NOT MODIFY LINE STATUS CODES (CARRIER ON/OFF)
;LINE CONTROL TRANSACTION CODES
XP LNTEHC,1 ;ENABLE HUNG CHECK
XP LNTDHC,2 ;DISABLE HUNG CHECK
IFNDEF STDALT,<STDALT==033> ;VALUE OF STANDARD ALTMODE
IFNDEF VTAB,<VTAB==10> ;VERTICAL TAB SPACING (MUST BE POWER OF 2)
IFNDEF FTMLOG,<XP FTMLOG,-1> ;NON-ZERO TO INCLUDE MIC LOG CODE
;SIZE OF CHUNKS
XP TTCHKS,4 ;MUST AGREE WITH COMMON
XP TT2CHK,TTCHKS*2 ;TWO CHUNKS
XP IMGTIM,^D10 ;MUST FIT IN LDPTIM FIELD. HUNG TIME FOR IMI
;HARDWARE PARAMETERS OTHER THAN THOSE IN THE XXXINT ROUTINES
CTY=120 ;HARDWARE DEVICE NUMBER OF THE KA10 CONSOLE TTY
SUBTTL DATA STRUCTURES -- LINTAB AND DSCTAB
;DATA STRUCTURES IN COMMON
;LINTAB: BLOCK # OF LINES INCLUDING SCANNER,CTY AND PTY'S
;EACH WORD= RH= LDB ADR
; LH13-17=0 (FOR @ LINTAB)
; LH 0-12 ARE COPIED INTO LDBDCH PERMANENT BITS BY LDBCLR
; POINTER = LNPVRG
;DSCTAB: BLOCK # OF DATASETS NEEDING TIMING
; RH= LINKED TTY LINE NUMBER FOR DATA
; LH= TIME IN 14-17, ALSO DSCHWC,DSCSWC,DSCFAI
IFN FTMODM,<
XP DSCHWC,400000 ;WHEN LAST HEARD FROM, THE HARDWARE CARRIER WAS ON
XP DSCSWC,200000 ;THE SOFTWARE CONSIDERS THE CARRIER TO BE ON OR
; TO BE COMING ON IMMINENTLY
XP DSCFAI,100000 ;CARRIER WENT OFF, BUT MAY BE BRIEF FAILURE
; EXCEPT FOR GPO 2B MODEM, MUST QUIT IMMEDIATELY
XP DSCNCR,040000 ;NEW CARRIER FLAG, ON FOR FRACTION OF SECOND FOR CLOCK SYNC
XP DSCBLI,020000 ;BLIND FLAG - IGNORE EVERYTHING FOR 1 SEC AFTER CARRIER ON
XP DSCDLW,010000 ;DIALLER WAIT. WAITING FOR RESULTS FROM DIALLER
XP DSCDLF,004000 ;DIALLER FAIL. UNSUCCESSFUL DIALLER ATTEMPT
XP DSCDLC,002000 ;DIALLER COMPLETE. SUCCESSFUL DIALLER ACTION.
XP DSCEON,001000 ;END OF NUMBER. SENT ALL DIGITS TO DIALLER.
XP DSCTMM,77 ;TIME MASK. MUST AGREE WITH DSTIMP POINTER.
;DEFINITIONS FOR INITIALIZATION ROUTINE IN SYSINI
XP DSCICL,DSCHWC!DSCSWC!DSCFAI!DSCDLW!DSCDLF!DSCDLC!DSCEON!DSCTMM
XP DSCIC1,DSCHWC!DSCSWC
XP DSCIC2,DSCTMM!DSCFAI!DSCDLW!DSCDLF!DSCDLC!DSCEON
> ;END OF FTMODM CONDITIONAL
SUBTTL DATA STRUCTURES -- LINE DATA BLOCK (LDB)
;PROTOTYPE LINE DATA BLOCK FOR A TTY (OR PTY) LINE
SCNLDB::
PHASE 0
LDBDDB::!XWD ZERO5,0 ;ADDRESS OF LINE'S ATTACHED DDB, IF ANY
XP LDBCMR,400000 ;SIGN BIT OF LDBDDB IS COMMAND REQUEST BIT
; MUST BE IN WORD ZERO, FOR @U, 13-17 MUST BE ZERO
XP LDBCMF,200000 ;COMMAND FORCED. MEANS TYI ATE A CONTROL C
; WHICH WAS DESTINED FOR COMCON, OR SOME OTHER COMMAND
; IS TO BE FORCED, VIA LDPCMX. MUST BE IN SAME
; WORD AS LDBCMR
XP LDBCMK,100000 ;FORCING KJOB COMMAND
;BITS 9-12 ARE INDEX FOR FORCED COMMAND,
; POINTER = LDPCMX
LDICLR::! ;ON RESTART, START CLEARING HERE
LDBBKU:!0 ;COPY OF LDBTIP AT LAST BREAK RECINT
LDBTIP:!0 ;T2 TO PUT CHARACTERS IN INPUT BUFFER
LDBTIT::!0 ;T2 TO TAKE CHARACTERS FROM INPUT BUFFER
LDBTIC:!0 ;COUNT OF ECHOED CHARACTERS IN INPUT BUFFER
LDBBKC::!0 ;COUNT OF BREAK CHARACTERS IN INPUT BUFFER
LDBTOP:!0 ;T3 TO PUT CHARACTERS IN OUTPUT BUFFER
LDBTOT:!0 ;T2 TO TAKE CHARACTERS FROM OUTPUT BUFFER
LDBTOC::!0 ;COUNT OF CHARACTERS IN OUTPUT BUFFER
LDBECT:!0 ;T2 TO TAKE CHARACTERS FROM INPUT FOR ECHOING
LDBECC::!0 ;COUNT OF CHARACTERS TO ECHO
LDBXNP::!0 ;XON CLASS CHARACTER POINTER FOR OUTPUT
LDBFLP::!0 ;FILLER CHARACTER POINTER FOR OUTPUT
LDBPBK::!0 ;WORD OF UP TO 4 BREAK CHARACTERS (8 BIT)
;FOR PACKED IMAGE MODE (PIM); SET WITH TRMOP 2037
LDICLE==:.-1 ;ON RESTART, CLEAR THRU HERE
;MORE OF THE PROTOTYPE LINE DATA BLOCK
LDBDCH::!0 ;DEVICE CHARACTERISTICS BITS
;BITS IN LH OF LDBDCH (CARRIED IN LH OF U DURING INTERRUPT ROUTINE)
LDLOIP==:400000 ;OUTPUT IN PROGRESS. EXPECTING XMT INTERRUPT
; MUST BE SIGN BIT.
LDLIMI==:200000 ;IMAGE INPUT (KEEP NULLS)
LDLIRM==100000 ;IRMA CATCHER (LOST XMT INTERRUPT)
LDLXON==:40000 ;XON TRUE (PAPER TAPE INPUT)
LDLOSU==:020000 ;OUTPUT SUPPRESS (^O)
LDLNEC==:010000 ;NO ECHO, DUE TO PROGRAM
LDLORS==004000 ;OUTPUT CLEAR RACE CONDITION SYNC
LDLFCS==:002000 ;LINE INITED IN FULL CHAR SET MODE
LDLECS==001000 ;EAT COMMAND SYNC, FOR TTCALL 10
LDLDLR==:000400 ;SUPPRESS DOLLAR SIGN ON ALTMODES.
XP LDLCOM,000200 ;LINE IS AT COMMAND LEVEL
LDLBKA==:000100 ;BREAK ON ALL CHARACTERS (DDTIN, TTCALL)
;*** BEGINNING OF GROUP OF BITS POINTED TO BY LDPVR1 ***
;*** BEGINNING OF 4 BITS POINTED TO BY GETLP1 FOR GETLIN ****
XP LDLSLV,000040 ;SLAVE. THIS TTY MAY BE ASSIGNED.
XP LDLLCT,000020 ;LOWER CASE TRANSLATE TO UPPER
XP LDLTAB,000010 ;LINE ACCEPTS TABS, NOT SPACES.
XP LDLLCP,000004 ;LOCAL COPY (NO ECHO)
;*** END OF BITS POINTED TO BY GETLP1 ***
XP LDLFRM,000002 ;LINE ACCEPTS FF AND VT (ELSE USE LF'S)
XP LDLNFC,000001 ;NO FREE CARRIAGE RETURN AT 72 COLUMNS
;*** END OF GROUP FOR LDPVR1 ***
XP LDLECH,LDLNEC!LDLBKA!LDLLCP
;BITS TO BE CLEARED ON A 140 RESTART
ZZL==LDLOIP+LDLIMI+LDLIRM+LDLOSU+LDLNEC+LDLECS+LDLDLR+LDLBKA+LDLXON
XP LDLIIF,LDLIMI+LDLFCS ;IMAGE INPUT OR FULL CHAR SET MODE
;RH OF LDBDCH - BITS 27-35 = LINE NUMBER, POINTER = LDPLNO
LDRPTY==:400000 ;PSEUDOTELETYPE
LDRCTY==:200000 ;CONSOLE TTY
;*** START OF GROUP OF BITS POINTED TO BY LDPVR2 ***
LDRDIS==100000 ;DISPLAY KEYBOARD CONSOLE
LDRDSD==:040000 ;DATASET DATA LINE
LDR274==:020000 ;LINE IS A 2741
LDRHLF==010000 ;HALF DUPLEX LINE (TWX OR DC10C)
LDRRMT==004000 ;REMOTE NON-DATASET LINE
XP LDRDSR,LDRDSD+LDRRMT ;REMOTE OR DATA SET LINE (FOR PATCH)
; SO CAN'T ATTACH TO PROJECT 1 #
;*** END OF GROUP FOR LDPVR2 ***
LDRREM==:002000 ;TTY AT REMOTE STATION
LDRSHC==:001000 ;SUPPRESS HUNG CHECK -I.E. DON'T FORCE CHAR'S OUT
; WHEN NO XMIT FLAG.--SET BY 680 FOR SPECIAL
; DEVICES (E.G. 2741) & ITS OPR. TTY
;BITS TO BE CLEARED ON A 400 RESTART
ZZR==LDRPTY+LDRCTY+LDRSHC
;DEFINITIONS OF BITS FOR GETLIN UUO, CLOSELY ASSOCIATED WITH ABOVE
GTLRDY==100 ;BIT FOR GETLIN TO INDICATE WAITING BREAK CHAR
GTLT37==20 ;MODEL 37 BIT (COPY OF LDLLCT)
GTLT35==10 ;MODEL 35 BIT (COPY OF LDLTAB)
GTLLCP==4 ;LOCAL COPY (OLD FULTWX) (COPY OF LDLLCP)
GTLXON==2 ;XON IS TRUE (COPY OF LDLXON)
GTLMSK==LDR274!777 ;BITS TO CLEAR ON GETLIN
LGLSET==GTLT37+GTLT35+GTLLCP+GTLXON ;MAY BE SET BY SETLIN
;MORE OF THE PROTOTYPE LINE DATA BLOCK
LDBOFL::!
LDBBYT::!0 ;A WORD OF BYTES FOR THIS LINE
;BITS POINTER USE
;35-28 LDPECK ECHO CHECK FOR HALF DUPLEX LINES
;27-20 PHPOS HORIZONTAL POSITION ON LINE
;19-15 LDPTIM TIMEOUT ON IMAGE INPUT
;14-06 LDPSVC SAVE CHARACTER DURING FREE CRLF, ^X, ETC.
;05-03 POHPOS OLD HORIZONTAL POSITION. NEEDED FOR TAB SIMULATION
;02-01 LDPFLC COUNT OF NUMBER OF FILLERS BY CLASS
;0 -1 IF FRONT END FOR THIS LINE IS
; DOWN. USE LDBOFL AS THE SYMBOL
; TO SKIPGE/SKIPL ON.
L1LOFL==:400000 ;THE OFF-LINE BIT
LDIBCM==477777 ;MASK TO CLEAR LDBBYT AT TTYINI. ALL ARE CLEARED
; EXCEPT LDPFLC
;ANOTHER BYTE WORD, FLAGS AT LEFT.
LDBBY2::!0
;BITS POINTER USE
;35-28 LDPRCS MOST RECENT RECEIVED CHARACTER
;20-27 LDPWID WIDTH OF TTY CARRIAGE
;18-19 BITS - SEE BELOW
;9-17 LDPDSC DATASET CONTROL TABLE INDEX BACK POINTER
;0-8 BITS - SEE BELOW
L2LDEL==:400000 ;LAST CHAR IN WAS A DELETE
L2LCCS==200000 ;LAST CHAR IN WAS A ^C
L2LHD1==100000 ;XMT DONE FLAG SEEN THIS CHAR ON HDX LINE
L2LHD2==040000 ;RCV DONE FLAG SEEN THIS CHAR ON HDX LINE
L2LHD3==020000 ;IGNORING RCV INTS DUE TO ECHO CHECK ERR ON HDX LINE
L2LHD4==010000 ;NEXT RCV INT WILL BE CUE AFTER ECHO CHK
L2LHD5==004000 ;RECEIVE ECHO WAS IN FACT NOT SAME AS XMT CHAR
L2LSND==:002000 ;SEND ALLOWED WHILE BUSY
L2LTAP==:001000 ;^Q FROM KEYBOARD TURNS ON LDLXON. SET BY .TTY TAPE COMMAND
L2LHDM==L2LHD1!L2LHD2!L2LHD3!L2LHD4!L2LHD5
L2LCLR==L2LDEL!L2LCCS!L2LHDM!L2LSND!L2LTAP
;CLEARED ON INITIALIZATION
L2RORH==400000 ;OUTPUT RACE HAPPENED. INDICATES THAT TSETBO
;WAS CALLED WHILE LDLORS WAS SET.
L2RIRH==200000 ;INPUT RACE HAPPENED. INDICATES THAT TSETBI
;WAS CALLED WHILE LPLIRS WAS SET.
;PAGE COUNTER WORD AND PAGE FLAGS
LDBPAG::!0
;BITS POINTER USE
;30-35 PAGE COUNTER
;24-29 PAGE SIZE
;18-23 #LF'S REMAINING ON F.F. SIMULATION
;10-17 AUTO CRLF COUNTER
;8 WE ARE FORCING XMIT START VIA TOPOKE
;7 INPUT RACE SYNC
;6 SEND ALL PENDING
;5 DON'T OUTPUT ANY MORE SINGLE L.F.'S
;4 SUPPRESS BLANK LINES (SET TTY NO BLANK)
;3 ALTMODE CONVERSION (SET TTY ALT)
;2 AN XOFF WAS SENT, XON NEEDED SOMETIME
;1 SET TTY PAGE HAS BEEN DONE
;0 TELETYPE OUTPUT HAS BEEN STOPPED
;(MUST BE SIGN BIT)
LPLSTP==400000 ;TTY OUTPUT IS STOPPED
LPLPAG==:200000 ;SET TTY PAGE COMMAND WAS EXECUTED
LPLXOF==100000 ;SENT XOFF, ALWAYS SEND AN XON LATER
LPLALT==:40000 ;ALTMODE CONV. (1:CONVERT 175,176 TO 033)
LPLBLK==:20000 ;SUPPRESS BLANK LINES
LPLSLF==10000 ;SUPPRESS LINE FEEDS
LPLSAP==:4000 ;SEND ALL PENDING
LPLIRS==2000 ;INPUT RACE SYNC
LPLPOK==1000 ;WE ARE FORCING XMIT START VIA TOPOKE (PREVENT RACE)
LPLCLR==LPLSTP!LPLXOF!LPLBLK!LPLSLF!LPLSAP!LPLIRS!LPLPOK ;CLEARED BY LDBINI
;FLAGS AND POINTER TO INTERUPT SERVICE ROUTINES
LDBISR::!BLOCK 1
;BITS POINTER USE
;0 N/A 1 IF THE FRONT END IS CLEVER, 0 IF DUMB
;1-4 LDPTSP TRANSMIT SPEED
;5-8 LDPRSP RECEIVE SPEED
;9 LDPAPL APL MODE
;10 LDPDBK DEBREAK FEATURE EXISTS
;11 LDPRTC CONTROL-R, CONTROL-T COMPATIBILITY
;12 LDPTDY USER SAID "SET TTY TIDY"
;13-17 CONTAIN T1 FOR @LDBISR(U)
;18-35 ADDRESS OF ISR DISPATCH TABLE
LILCFE==:(1B0) ;CLEVER FRONT END
LILRSP==:(17B4) ;RECEIVE SPEED
LILTSP==:(17B8) ;TRANSMIT SPEED
LILAPL==:(1B9) ;APL MODE
LILDBK==:(1B10) ;LINE HAS DEBREAK
LILRTC==:(1B11) ;CONTROL-R, CONTROL-T ARE PASSED TO PGM
LILTDY==:(1B12) ;DO NOT EXPAND OUTPUT
;FUNCTIONS ARE
ISRTYP==0 ;OUTPUT DATA IN T3 ON LINE POINTED TO BY U
ISRDSC==1 ;DATA SET CONTROL
ISRCHK==2 ;TEST FOR LOST PIA
ISRINI==:3 ;INIT ISR
ISRCHP==:4 ;CHANGE HARDWARE PARAMETERS
ISRLPC==:5 ;SEND LINE PARAMETER CONTROL MSG
ISRELE==:6 ;SET ELEMENT #
ISRREM==:7 ;DO REMOTE TTY STUFF
ISROFL==:10 ;SKIP IF FRONT END ON LINE
IFN FTD10H,<
;FLAGS FOR 2741 SUPPORT
LDBBCD::BLOCK 1
>;END IFN FTD10H
;FIVE WORDS FOR REMOTE STATION TELETYPE STATUS
IFN FTNET,<
LDBREM::!BLOCK 1 ;LH = SCB POINTER, RH = BITS
LRRIDL==:LRRTTO!LRRSCG!LRRCHP!LRRADL
LRRNOT==:LRRSCG!LRRCHP!LRRADL!LRRXOF ;TTY ACTIVE BUT NOT TO OUTPUT DATA
LRRLEO==:400000 ;FRONT END IS DOING LOCAL ECHOING
LRRTTO==:200000 ;TTY OUTPUT READY TO GO (28-35 IS CHAR)
LRRTTW==:100000 ;TTY OUTPUT WAITING FOR DATA REQ.
LRRSCG==:40000 ;CONTROL O WANTS A CHARACTER GOBBLER
LRREPW==:20000 ;ECHO PIPELINE MARKER WAITING
LRRCHP==:10000 ;WE NEED TO SEND CHARACTERISTICS
LRRIMO==:4000 ;IMAGE OUTPUT MODE IN PROCESS
LRRADL==:2000 ;AUTO DIAL REQUEST
LRRXOF==:1000 ;WE MUST REQUEST THE FRONT END TO SEND "XOFF"
; 777 ;CHARACTER WAITING TO OUTPUT
; ;INCLUDES THE IMAGE MODE BIT
BLOCK 1 ;LH = DATA REQ. COUNT, RH = STATUS BITS
BLOCK 1 ;LH = LAST ECHO PIPELINE MARKER (BITS 10-17)
;RH = BACKWARD/FORWARD LINK FOR ACTIVE TTYS
LRDDSL==:400000 ;REMOTE DATA SET LINE
LRDDTR==:200000 ;RING/CARRIER
LRDDSR==:100000 ;DATA SET READY
LRDATO==:40000 ;AUTO BAUD LINE
LRDADL==:20000 ;AUTO DIAL OUT LINE (BELL 801)
LRD741==:10000 ;REMOTE 2741
LRDTIW==:4000 ;TI INPUT WAIT
LRDCLR==:LRDDSR!LRDDTR!LRDTIW ;BIT TO CLEAR
;RH = UNUSED
BLOCK 1 ;ENCODED LAST CHARACTERISTICS SENT
BLOCK 1 ;BYTE (8)REMOTE LINE #,(14)SLA,DLA
;DEFINITIONS FOR SUPPORT OF RSX-20F TERMINALS
LDBTTD==:LDBREM+1 ;SAVED OUTPUT CHAR
LDBLAR==:LDBREM+2 ;CURRENT LINE ALLOCATION REMAINING
LDBSS1==:LDBREM+3 ;FIRST WORD OF LINESPEED MESSAGE SENT TO FRONT-END
LRSXOF==:1 ;FLAG FOR TTDINT TO REMEMBER ^S/^Q FOR LINE
LRSRBS==:2 ;REMOTE BIT SENT (BECAUSE OF RSX-20F QUIRK, CAN
; ONLY SAY LINE IS REMOTE ONCE)
LDBSS2==:LDBREM+4 ;SECOND WORD OF LINESPEED MESSAGE,,TTD DTE INDEX
>;END OF IFN FTNET
IFN FTMIC,< ;IF MIC INCLUDED
;WORD FOR MIC TO USE
LDBMIC::0
;0 SET IF SOME BIT 1-14 IS SET
;1 SET IF A ^C HAS BEEN TYPED
;2 SET IF OPERATOR CHAR SEEN IN COLUMN1
;3 SET IF ERROR CHAR SEEN IN COLUMN 1
;4 SET IF A ^P HAS BEEN TYPED
;5 SET IF A ^B HAS BEEN TYPED
;6 SILENCE THIS LINE
;7 LINE IN MONITOR MODE
; NOT SET IN LDBMIC BUT IS SET ON A MICGET
;8 LINE IN USER MODE AND IN TI WAIT OR IN MONITOR MODE
; AND CAN ACCEPT A COMMAND
; NOT SET IN LDBMIC BUT IS SET ON A MICGET
;9 LINE IS IN COLUMN 1 ON OUTPUT
; USED FOR ERROR AND OPERATOR CHECKING
;10 SET IF A ^A HAS BEEN TYPED (ABORT)
;11 SET IF TELETYPE OUTPUT IS AVAILABLE
;15-21 ASCII CHAR TO BE TREATED AS OPERATOR CHAR
; SET IN RESPONSE TO OPERATOR COMMAND
; CLEARED IN RESPONSE TO NOOPERATOR COMMAND
; OR ON LOGOUT
;22-28 ASCII CHAR TO BE TREATED AS ERROR CHAR
; SET IN RESPONSE TO ERROR COMMAND
; CLEARED IN RESPONSE TO NOERROR COMMAND
; OR ON LOGOUT
;29-35 MIC MASTER JOB NUMBER - ENABLES MORE THAN ONE MIC TO RUN
LDLCHK==400000
LDL.CC==200000
LDL.OP==100000
LDL.ER==40000
LDL.CP==20000
LDL.CB==10000
LDL.XX==4000
LDL.MM==2000
LDL.TI==1000
LDL.TO==400
LDLCL1==400
LDL.CA==200 ;^A TYPED
LDL.RS==100 ;ERROR RESPONSE
LDL.SY==40 ;RESPONSE CODE SYNC
IFN FTMLOG,<
LDL.LG==20 ;MIC IS LOGGING
LDBLOT::0 ;LOG TAKER,,COUNT OF CHARS TO LOG
LDBLOC::0 ;COUNT OF CHARACTERS TO LOG
> ;END OF FTMLOG CONDITIONAL
> ;END OF MIC CONDITIONAL
DEPHASE
LDBLEN==:.-SCNLDB ;SIZE OF DATA BLOCK FOR A LINE
;DISPATCH TABLE FOR PTYS AND CTYS.
IFN FTKA10!FTKI10,<
CTYDSP::
>;END IFN FTKA10!FTKI10
ERRDSP::POPJ P,0 ;TYPEOUT
POPJ P,0 ;MODEM CONTROL
POPJ P,0 ;ONCE A SECOND
POPJ P,0 ;INITIALIZATION
POPJ P,0 ;CHANGE HARDWARE PARMS
POPJ P, ;LINE PARM CONTROL
POPJ P, ;SET ELEMENT
POPJ P, ;REMOTE STUFF
JRST CPOPJ1## ;IS LINE UP?
IFN FTKL10,<
;DISPATCH FOR CTY
CTYDSP::POPJ P,0 ;TYPEOUT
POPJ P,0 ;MODEM CONTROL
POPJ P,0 ;ONCE A SECOND
JRST CT0INI## ;INITIALIZATION
POPJ P,0 ;CHANGE HARDWARE PARMS
POPJ P, ;LINE PARM CONTROL
POPJ P, ;SET ELEMENT
POPJ P, ;REMOTE STUFF
JRST CPOPJ1## ;IS LINE UP?
>;END IFN FTKL10
;LINE SPEED MNEMONICS
LS0000==:0 ;ZERO BAUD
LS0050==:1 ;50 BAUD
LS0075==:2 ;75 BAUD
LS0110==:3 ;110 BAUD
LS0134==:4 ;134.5 BAUD
LS0150==:5 ;150 BAUD
LS0200==:6 ;200 BAUD
LS0300==:7 ;300 BAUD
LS0600==:10 ;600 BAUD
LS1200==:11 ;1200 BAUD
LS1800==:12 ;1800 BAUD
LS2400==:13 ;2400 BAUD
LS4800==:14 ;4800 BAUD
LS9600==:15 ;9600 BAUD
;DATA POINTERS INTO LDB
LDPFLC::POINT 2,LDBBYT(U),2 ;POINTER TO INDEX OF FILLER CLASSES
LDPLNO::POINT 9,LDBDCH(U),35 ;POINTER TO HARDWARE LINE NUMBER
LDPSVC: POINT 9,LDBBYT(U),14 ;POINTER TO SAVED CHARACTER
;TO BE USED AFTER FILLERS SENT
LDPTIM: POINT 5,LDBBYT(U),19 ;POINTER TO FIELD WHICH TIMES OUT
; IMAGE MODE INPUT
IFN FTHDPX!FTTRACK,<
LDPECK::POINT 8,LDBBYT(U),35 ;POINTER TO LAST CHARACTER SENT, FOR
; ECHO CHECK ON HDX LINE
>
PHPOS:: POINT 8,LDBBYT(U),27 ;POINTER TO POSITION ON LINE (0-71)
POHPOS: POINT 3,LDBBYT(U),5 ;POINTER TO LOW 3 BITS OF HPOS
; BEFORE A TAB (FOR TAB SIMULATION)
LNPVRG: POINT 13,LINTAB##(T1),12 ;POINTER TO LOW CORE COPY OF BITS FOR RESTART
LDPVR1: POINT 6,LDBDCH(U),17 ;POINTER TO STORE SOME OF ABOVE BITS
LDPVR2: POINT 5,LDBDCH(U),24 ;POINTER TO STORE SOME MORE OF ABOVE.
LDPCMX::POINT 4,LDBDDB(U),12 ;POINTER TO INDEX OF FORCED COMMANDS
IFN FTTRACK,<
LDPRCS: POINT 8,LDBBY2(U),35 ;POINTER TO RECEIVED CHARACTER
; SAVED FOR WATCHING IN LIGHTS.
>
LDPWID::POINT 8,LDBBY2(U),27 ;POINTER TO WIDTH OF TTY CARRIAGE
IFN FTMODM,<
LDPDSC::POINT 9,LDBBY2(U),17 ;POINTER TO DATASET CONTROL TABLE INDEX
>
LDPPSZ::POINT 6,LDBPAG(U),29 ;PAGE SIZE (# OF LINES)
LDPPCT: POINT 6,LDBPAG(U),35 ;PAGE COUNTER
LDPPFF: POINT 6,LDBPAG(U),23 ;L.F. COUNTER FOR SIMULATION OF V.T. & F.F.
IFN FTCAFE,<
LDPSPD::POINT 8,LDBISR(U),8 ;BOTH SPEEDS
> ;END FTCAFE
LDPRTC::POINT 1,LDBISR(U),11 ;^R, ^T COMPATIBILITY
LDPRSP::POINT 4,LDBISR(U),8 ;RECEIVE SPEED
LDPTSP::POINT 4,LDBISR(U),4 ;TRANSMIT SPEED
LDPAPL::POINT 1,LDBISR(U),9 ;APL MODE BIT
LDPDBK::POINT 1,LDBISR(U),10 ;DEBREAK FEATURE EXISTS
LDP274::POINT 1,LDBDCH(U),22 ;LINE IS A 2741
LDPTDY::POINT 1,LDBISR(U),12 ;DO NOT EXPAND OUTPUT
LDPACR::POINT 8,LDBPAG(U),17 ;AUTO CRLF POINT
IFN FTNET,<
;BYTE POINTERS TO THE LDBREM
LDPRLN::POINT 8,LDBREM+4(U),7 ;PHYSICAL REMOTE LINE NUMBER
LDPSLA::POINT 14,LDBREM+4(U),21 ;SOURCE LINK ADDRESS
LDPDLA::POINT 14,LDBREM+4(U),35 ;DESTINATION LINK ADDRESS
LDPEPM::POINT 8,LDBREM+2(U),17 ;CURRENT ECHO PIPLE MARKER
LDPDRQ::POINT 8,LDBREM+1(U),17 ;DATA REQUEST COUNT
LDPELE::POINT 4,LDBREM+1(U),9 ;ELEMENT NUMBER
LDPALF::POINT 9,LDBREM+2(U),35 ;FORWARD ACTIVE TTY POINTER
LDPALB::POINT 9,LDBREM+2(U),26 ;BACKWARD
LDPBLF::POINT 9,LDBREM+2(T1),35 ;LIKE ABOVE BUT FOR DIFFERENT TTY
LDPBLB::POINT 9,LDBREM+2(T1),26
>;END OF IFN FTNET
;BITS TO BE CLEARED ON A 140 RESTART
LDIDCM: XWD ZZL,ZZR ;TO CLEAR BITS IN LDBDCH
SUBTTL DATA STRUCTURES -- TTY DEVICE DATA BLOCK (DDB)
;PROTOTYPE SCANNER DDB. REPLICATED BY ONCE. ONE FOR EACH JOB.
$LOW
TTYLST:: ;LABEL FOR FIRST TTY DDB IN CHAIN
SCNDDB:: ;GLOBAL LABEL
PHASE 0
SIXBIT /TTY0/ ;DEVNAM (PHYSICAL NAME)
XWD 0,STTYBF+1 ;DEVCHR. SIZE OF USER BUFFER
0 ;DEVIOS
XWD 0,SCNDSP ;DEVSER
XWD DVTTY+DVIN+DVOUT,<<1_A>+<1_AL>+<1_PIMMOD>+<1_I>> ;DEVMOD
0 ;DEVLOG (LOGICAL NAME)
0 ;DEVBUF
XWD R,0 ;DEVIAD
XWD R,0 ;DEVOAD
0 ;DEVSTS
XWD .TYTTY,0 ;DEVSTA
0 ;DEVXTR
0 ;DEVEVM
0 ;DEVPSI
0 ;DEVESE
0 ;DEVHCW
0 ;DEVJOB
DDBLDB::!0 ;DDBLDB LINKS TO THE LDB.
IFN FTACCT,<
DDCOFS==:DDBICC ;OFFSET OF COUNTS IN TTY DDB
DDBICC: 0 ;INPUT CHARACTER COUNT
DDBOCC: 0 ;OUTPUT CHARACTER COUNT
DDBBCC::!0 ;COMMANDS TYPED,,INPUT WAKEUP CHARACTERS
>
DEPHASE
XP SCNDDS,.-SCNDDB
$HIGH
BYTCNT: POINT 12,DEVOAD(F),12
;DATA WITHIN THE DDB
;USE OF DEVIOS
;LEFT HALF
XP TTYOUW,400000 ;REMEMBERS THAT IF IN IOW, IT IS FOR OUTPUT, AS
; OPPOSED TO INPUT. I.E., WHICH INT WAKES JOB
FRCEND=:200000 ;IN IMAGE INPUT, FORCE END OF FILE DUE TO TIMING
IOSBKA=100000 ;BREAK ON ALL CHARACTERS, DUE TO DDTIN OR TTCALL
;RIGHT HALF
DLRSUP==400 ;SUPPRESS ECHO OF DOLLAR SIGN ON ALTMOD
NOECHO==:200 ;USER (E.G. LOGIN) SUPPRESSING ECHO
FCS==100 ;USER WANTS ALL CHARACTERS.
SUBTTL TRANSMIT INTERRUPT ROUTINE
;ENTRY FROM DEVICE-DEPENDENT INTERRUPT SERVICE ROUTINE ON A
; TRANSMIT-DONE INTERRUPT. THE HARDWARE LINE NUMBER IS
; IN AC U
;ALSO ENTERED AT XMTIN0 AND XMTIN1 TO START ACTIVITY, SINCE CAN'T
; SET THE DONE FLAG ON AN INDIVIDUAL LINE IN THE SCANNER TO
; START THE DEVICE.
XMTINT::MOVE U,LINTAB##(U) ;GET LINE DATA BLOCK ADDRESS
IFN FTRSP,< AOS %SCNXI ;COUNT INTERRUPT>
MOVSI T1,L1LOFL
ANDCAM T1,LDBOFL(U)
SKIPL LDBDCH(U) ;ARE WE EXPECTING THIS?
PJRST XMTDMC ;IN CASE 2741
IFN FTHDPX,<
MOVE T1,LDBDCH(U) ;SEE IF ITS A HALF DUPLEX LINE
TRNE T1,LDRHLF ; ..
JRST XMTHDX ;YES. SPECIAL HANDLING
>
XMTIN0: HLL U,LDBDCH(U) ;GET CHARACTERISTICS BITS
HRRZ T1,LDBDDB(U) ;TEST FOR PIM, GET DDB ADDRESS
JUMPE T1,XMTIN1 ;NO DDB, CANT BE PIM
MOVE T1,DEVIOS(T1) ;GET WORD WITH MODE IN IT
TRNE T1,PIMMOD ;PIM MODE BIT SET?
JRST XMPIM ;YES, THIS LINE IN PIM
IFN FTMIC,< ;IF MIC
XMTIN1: MOVEI T1,LDRPTY
TDNE T1,LDBDCH(U)
JRST XMTBFZ
SKIPE LDBXNP(U) ;NEED XOFF OR BELL?
> ;END OF IF MIC BIT
IFE FTMIC,< ;IF NOT MIC
XMTIN1: SKIPE LDBXNP(U) ;NEED XOF OR BELL?
> ;END OF IF NOT MIC BIT
JRST XMTXOF ;YES. GO SEND IT
XMTXOZ: SKIPE LDBFLP(U) ;NEED FILLERS FOR PREVIOUS OUTPUT?
JRST XMTFIL ;YES. GO SEND THEM.
XMTFIZ: ;RETURN HERE IF FILLER POINTER REACHES END OF FILLER STREAM
SKIPLE LDBTOC(U) ;CHARACTERS LEFT IN OUTPUT BUFFER?
JRST XMTBUF ;YES. GO SEND ONE.
XMTBFZ: SKIPLE LDBECC(U) ;CHARACTERS TO ECHO?
JRST XMTECH ;MAYBE. GO SEE.
XMTECZ: ;RETURN HERE IF NONE TO ECHO
XMTIDL: ;IF GET HERE, LINE IS NOW IDLE. CLEAN IT UP.
MOVSI T1,LDLOIP+LDLIRM ;CLEAR OUTPUT SYNC BIT AND
ANDCAM T1,LDBDCH(U) ; HUNG LINE SYNC BIT
IFN FTHDPX,<
MOVSI T1,L2LHDM ;CLEAR HALF DUPLEX FLAGS TOO
ANDCAM T1,LDBBY2(U) ; ..
>
IFN FTHIBWAK,<
HRRZ F,LDBDDB(U) ;ADDRESS OF LINKED DDB
PUSH P,J ;SAVE J
JUMPE F,XMTPSI ;JUMP IF NO DDB
LDB J,PJOBN## ;GET JOB NUMBER
MOVE T1,JBTSTS##(J) ;GET JOB STATUS
TRNE T1,JS.NTO ;HIBERING FOR NON-BLOCKING TTY OUTPUT?
PUSHJ P,WAKEJB## ;YES--WAKE HIM UP
XMTPSI: POP P,J ;RESTORE J
>
XMTDMC:
IFN FTCAFE&FT2741!FTNET,<
SKIPGE LDBDDB(U) ;ANY COMMAND?
JRST XMTWAK ;YES--WAIT FOR IT
TLNE U,LDLCOM ;AT COMMAND LEVEL?
PUSHJ P,UNLKBD ;YES--UNLOCK KEYBOARD
HRRZ F,LDBDDB(U) ;IF NO DDB ALL DONE
IFN FTMIC,< ;IF MIC
JUMPE F,XMTWAK ; ..
> ;END OF IF MIC
IFE FTMIC,< ;IF NOT MIC
JUMPE F,CPOPJ## ; ..
> ;END OF IF NOT MIC
SKIPL T1,DEVIOS(F) ;SKIP IF NOT IN INPUT WAIT
TLNN T1,IOW ;WAITING FOR INPUT
JRST XMTWK1 ;NO--TEST FOR OUTPUT
PJRST UNLKBD ;YES--UNLOCK 2741
> ;END FTCAFE&FT2741!FTNET
XMTWAK::
IFN FTMIC,< ;IF MIC
IFN FTMLOG,<
SKIPE T1,LDBMIC(U)
TLNN T1,LDL.LG
PUSHJ P,MLOGOF ;NOT REQUIRE LOG FEATURE
HRRZ T1,LDBLOC(U) ;HOW BIG IS LOG BUFFER
CAIL T1,^D79
JRST MICWAK ;WAKE MIC NOT JOB
SKIPE LDBMIC(U)
PUSHJ P,MICWAK ;WAKE MIC AS WELL
> ;END OF MIC LOG CONDITIONAL
> ;END OF IF MIC
HRRZ F,LDBDDB(U) ;GET ADDR OF ATTACHED DDB
JUMPE F,CPOPJ## ;IF NONE, SKIP THIS CODE
MOVE T1,DEVIOS(F) ;GET STATUS OF TTY FROM DDB
XMTWK1: TLNE T1,IOW ;JOB IN I/O WAIT FOR TTY?
JUMPL T1,TTWAKE ;WAKE JOB IF OUTPUT WAIT
POPJ P,0 ;RETURN
;PACKED IMAGE MODE (PIM) INTERRUPT LEVEL CODE...
XMPIM:
SKIPE LDBXNP(U) ;XOFF/XON TO BE SENT?
JRST XMPX ;YES, DO SO
XMPIM1:
IFN FTTPAG,<
SKIPGE LDBPAG(U) ;OUTPUT STOPPED BY XOF?
JRST XMTIDL ;YES, DONT TYPE ANY MORE
> ;END OF FTTPAG
MOVE T2,LDBTOT(U) ;IS TAKER
CAME T2,LDBTOP(U) ; CAUGHT UP?
SOSGE LDBTOC(U) ;ANY OUTPUT TO DO
JRST XMTIDL ;NO, GO IDLE
SKIPE LDBXNP(U) ;XOFF/XON TO BE SENT?
JRST ZAPIM ;POINTER OR COUNT MESSED UP
IBP LDBTOT(U)
MOVE T2,LDBTOT(U)
PUSHJ P,TTGETC ;GET THE CHARACTER, LINK IF NECESSARY
PUSHJ P,XMTBFF ;NEW CHUNK, FREE OLD
MOVE T1,LDBTOC(U) ;GET CHARACTER COUNT OF OUTPUT BUFFER
CAIG T1,12 ;IF LESS THAN 10. CHARS LEFT IN OUTPUT BUFFER,
PUSHJ P,XMTWAK ;WAKE UP THE ATTATCHED JOB
JRST TYPE ;SENT CHARACTER IN T3 AND DISMISS
ZAPOUT: CONO PI,PIOFF## ;SOMEHOW WE GOT OUTPUT POINTERS
SETZM LDBTOC(U) ; OR COUNT MESSED UP. ADJUST THEM
MOVE T2,LDBTOT(U) ; TO PREVENT VARIOUS CRASHES
MOVEM T2,LDBTOP(U) ; CAUSED BY RACE CONDITIONS
CONO PI,PION## ; SUCH AS CL0, RCC, ETC.
POPJ P,
ZAPIM: PUSHJ P,ZAPOUT
JRST XMTIDL
XMPX: ILDB T3,LDBXNP(U) ;SEND FORCED CHARACTER
JUMPN T3,TYPE ;TYPE IF ANY THERE
SETZM LDBXNP(U) ;ELSE,CLEAR POINTER WORD
JRST XMPIM1 ;BACK
;HERE ON A TRANSMIT DONE INTERRUPT WHEN LDBTOC .GT. ZERO
XMTBUF:
IFN FTMIC,< ;IF MIC
IFN FTMLOG,<
MOVE T2,LDBMIC(U)
TLNE T2,LDL.LG ;HAS HE ASKED FOR LOG
SKIPE LDBLOT(U) ;HAS HE GOT A LOG TAKER
JRST MICLG3
MOVE T2,LDBTOT(U) ;MAKE COPY OF TAKER
MOVEM T2,LDBLOT(U)
MICLG3:
> ;END OF FTMLOG CONDITIONAL
LDB T2,PHPOS ;HORIXONTAL POSITION
JUMPN T2,XMTOK ;IN COLUMN 1?
SKIPE T2,LDBMIC(U) ;IS HE RUNNING MIC OR
TLNN T2,LDL.RS!LDL.SY ;WANTS RESPONSE FEATURE
JRST XMTOK ;NO - MUST NOT INTERFERE
TLNE T2,LDL.ER ;HAS HE HAD ERROR?
TLNE T2,LDL.CC ;AND NOT ^C
JRST XMTOK ;NO - IGNORE
MOVE T2,LDBTOT(U) ;PREVIEW CHAR IN COL 1
IBP T2
PUSHJ P,TTGETC
JFCL
LDB T2,LDP.ER ;GET ERROR CHAR
JUMPE T2,XMTOK ;MUST BE ONE
ANDI T3,177 ;JUST 7 BITS
CAME T3,T2 ;SAME AS ERROR CHAR?
JRST XMTOK ;NO IGNORE
MOVSI T2,LDL.SY!LDLCHK ;SET THE SYNC
IORB T2,LDBMIC(U)
TLNN T2,LDL.RS ;BEEN THIS WAY BEFORE
JRST XMTBFZ ;YES JUST DO ECHOING
HRRZ F,LDBDDB(U)
JUMPE F,XMTBFZ ;NO ATTACHED DDB
MOVE S,DEVIOS(F)
TLNN S,IOW ;IN IO WAIT?
JRST XMTBFZ ;NO FORGET IT
MOVSI T2,LDL.RS
ANDCAM T2,LDBMIC(U) ;SAY SYNC
PUSHJ P,MICWAK
JRST XMTBFZ ;AND PUT THE PLUG IN
XMTOK:
> ;END OF IF MIC
IFN FTTPAG,<
SKIPGE LDBPAG(U) ;HAS OUTPUT BEEN STOPPED BY XOFF?
JRST XMTBFZ ;YES, THEN DON'T TYPE ANY MORE
>
MOVE T2,LDBTOT(U) ;BE SURE TAKER HASN'T
CAME T2,LDBTOP(U) ; CAUGHT UP TO PUTTER
SOSGE LDBTOC(U) ;BETTER TO DECREMENT BEFORE USING
JRST ZAPBUF ; POINTER OR COUNTER MESSED UP
CONO PI,SCNOFF## ;PROTECT AGAINST RACE
IBP LDBTOT(U) ;INCREMENT TO NEXT CHARACTER POSITION
MOVE T2,LDBTOT(U) ;...AND PUT INTO T2 FOR TTGETC
PUSHJ P,TTGETC ;GET THE CHAR. LINK IF NEEDED.
PUSHJ P,XMTBFF ;WENT ON TO ANOTHER CHUNK
CONO PI,SCNON## ;CHANNEL BACK ON
MOVE T1,LDBTOC(U) ;GET CHARACTER COUNT OF OUTPUT BUFFER
IFN FTMLOG,<
SKIPE LDBLOT(U)
AOS LDBLOC(U)
> ;END OF FTMLOG CONDITIONAL
JUMPE T3,XMTFIZ ;NULL, RETURN TO LDBTOC TEST
CAIG T1,12 ;IF .LE. 10. CHARS LEFT IN OUT BUF,
PUSHJ P,XMTWAK ;WAKE UP THE ATTACHED JOB (IF ANY)
IFN FTTBLK,<
MOVSI T1,LPLBLK ;BLANK SUPPRESSION?
TDNE T1,LDBPAG(U)
PUSHJ P,BLKSUP ;YES
>
IFN FTTVP,<
PUSHJ P,ADJVP ;ADJUST VERTICAL POSITION
SKIPA T1,LDBPAG(U) ;PAGE OVERUN - GET BITS
JRST TYPEF1
TLNN T1,LPLPAG ;ENABLED FOR PAGE HALTS?
JRST TYPEF1 ;NO
MOVSI T1,LPLSTP ;YES - SET BIT
IORM T1,LDBPAG(U)
> ;IFN FTTVP
TYPEF1: ;ENTER HERE TO TYPE A CHARACTER WITH ITS FILLERS
PUSHJ P,ADJHP ;ADJUST THE HORIZONTAL POSITION.
TRNE T3,400
JRST TYPE
PUSHJ P,SETFLO ;SET UP THE POINTER TO ANY FILLERS
JRST XMTFIL ;NEED CRLF. GO SEND IT FIRST.
JRST TYPE ;SEND THE CHARACTER IN T3, RETURN.
ZAPBUF: PUSHJ P,ZAPOUT
JRST XMTBFZ
;HERE ON A TRANSMIT DONE INTERRUPT WHEN LDBXNP IS NON-ZERO.
;LDBXNP IS A NINE-BIT BYTE POINTER TO FORCED CHARACTERS SUCH AS
; XOFF AND BELL.
XMTXOF: ILDB T3,LDBXNP(U) ;GET A CHARACTER.
JUMPN T3,TYPE ;IF NOT AT END, SEND AND DISMISS
SETZM LDBXNP(U) ;REACHED END. CLEAR POINTER
JRST XMTXOZ ; AND RETURN TO MAIN FLOW OF XMTINT
;HERE ON A TRANSMIT-DONE INTERRUPT WHEN LDBFLP IS NON-ZERO.
;LDBFLP IS A NINE-BIT BYTE POINTER TO FILLER CHARACTERS, OR
; TO FREE CRLF'S OR TAB SIMULATIONS.
XMTFIL: ILDB T3,LDBFLP(U) ;GET A FILLER CHARACTER
JUMPN T3,XMTFI1 ;IF NOT AT END, SEND IT AND DISMISS
IFN FTTALK,<
MOVSI T1,LPLSAP ;WAITING TO DO A
TDNE T1,LDBPAG(U) ;SEND ALL?
JRST [ANDCAM T1,LDBPAG(U) ;YES -- CLEAR BIT
MOVE T1,SNDPTR## ;SET UP POINTER
MOVEM T1,LDBFLP(U) ;STORE IN LDB
JRST XMTFIL] ;TYPE THE STRING
>
SETZB T1,LDBFLP(U) ;END. CLEAR THE BYTE POINTER AND T1
IFN FTTVP,<
LDB T3,LDPPFF ;F.F. OR V.T. SIMULATION?
SOJL T3,XMTFI0 ;NO
DPB T3,LDPPFF ;YES - OUTPUT ANOTHER L.F.
MOVEI T3,12
JRST XMTFI2
> ;IFN FTTVP
XMTFI0: LDB T3,LDPSVC ;SEE IF ANY SAVED CHARACTER
JUMPE T3,XMTFIZ ;IF NOT, RETURN TO XMTINT
DPB T1,LDPSVC ;CLEAR THE SAVED CHAR BYTE
XMTFI2: MOVE T1,LDBDCH(U)
TDNN T1,[LDLLCP+LDLNEC,,LDRHLF]
SKIPE LDBTOC(U) ;WAS THAT CHAR FOR INPUT OR OUTPUT?
JRST TYPEF1 ;OUTPUT. GO SEND IT WITH FILLERS
JRST TYPEF2 ; INPUT.
XMTFI1: CAIE T3,FLLFLG ;IS THIS A FLAG OR A CHARACTER?
JRST TYPE ;CHARACTER. GO TYPE IT.
LDB T1,LDPFLC ;FLAG. APPEND CRLF. WHAT FILLERS?
IFN FTNET,<
MOVE T3,LDBDCH(U) ;GET TTY BITS
TRNE T3,LDRREM ;REMOTE STATION TTY?
SETZ T1, ;YES, IT DOES ITS OWN FILL.
>
MOVE T3,FLLCRP(T1) ;GET RIGHT CRLF POINTER
MOVEM T3,LDBFLP(U) ;PLACE IN FILLER POINTER
JRST XMTFIL ;AND GO TYPE FROM IT.
XMTBFF: MOVEM T2,LDBTOT(U) ;STORE NEW OUTPUT ADDRESS
IFE FTMLOG,<
PJRST FRECHK ;AND GO RETURN THE CHUNK TO FREE LIST
>
IFN FTMLOG,<
SKIPN LDBLOT(U) ;IS MIC LOGGING
PJRST FRECHK ;NO-FREE UP THE CHUNK
POPJ P,0
> ;END OF FTMLOG CONDITIONAL
;HERE WHEN BUFFERED AND FILLER OUTPUT DONE, AND LDBECT IS NON-ZERO
;NEED TO ECHO A CHARACTER THAT HAS BEEN TYPED IN.
XMTECH: MOVE T2,LDBECT(U) ;ECHO CAUGHT UP
SOSL LDBECC(U) ; OR COUNT EXHAUSTED?
CAMN T2,LDBTIP(U)
JRST ZAPECH ;YES. ERROR
IBP LDBECT(U) ;POINT TO NEXT CHAR TO ECHO
MOVE T2,LDBECT(U) ;AND GET UPDATED POINTER INTO T2
IFN FTRSP,< AOS %SCNEI>
PUSHJ P,TTGETC ;GET THE CHARACTER. LINK IF NEEDED
MOVEM T2,LDBECT(U) ;STORE NEW CHUNK ADDRESS
PUSHJ P,SPCHEK ;SEE IF IT'S SPECIAL.
JRST XMTEC1 ;IT'S NOT.
TLNE T1,CHBRK ;YES. IS IT A BREAK CHAR?
AOS LDBBKC(U) ;YES. COUNT IT IN THE LDB
XMTEC1: AOS T2,LDBTIC(U) ;COUNT THE INPUT CHARACTERS
TLNE U,LDLBKA+LDLIMI ;BREAK ON ALL CHARACTERS?
PUSHJ P,RCVWKQ ;YES. GO DO SO IF NEEDED.
CAIG T2,^D72 ;ARE THERE OVER 72. OF THEM?
TLNE T1,CHBRK ;OR IS IT A BREAK CHARACTER?
PUSHJ P,ECHBRK ;YES. WAKE THE JOB, IF ANY
IFN FTTVP,<
PUSHJ P,ADJVP ;ADJUST VERT. POSITION
JFCL ;IGNORE PAGE OVERRUN
>
TYPEF2: PUSHJ P,SETFLI ;SET FILLERS FOR ECHOING
JRST XMTFIL ;OUTPUT FROM FILLER POSITION.
IFN FTMIC,<
SKIPN T1,LDBMIC(U) ;RUNNING MIC?
JRST TYPE2B ;NO
TLNN T1,LDL.CB ;IN MIC BREAK?
JRST TYPE2A ;NO, DON'T DO ECHO CHECK
TYPE2B: ;YES, NORMAL CHECKING
>
MOVE T1,LDBDCH(U) ;GET LEFT AND RIGHT HALF BITS
TDNE T1,[XWD LDLLCP,LDRHLF!LDR2741] ;EITHER TYPE OF LOCAL COPY?
JRST XMTIN1 ;YES. DO NOT ECHO THE CHARACTER
IFN FTNET,<
MOVEI T1,LRRLEO ;CHECK FOR LOCAL ECHO MODE
TDNE T1,LDBREM(U)
JRST XMTIN1 ;DONT ECHO CHAR -- DC72 ALREADY DID
>
TYPE2A:
TLNN U,LDLCOM ;CHARACTER ITSELF SHOULD BE ECHOED
TLNN U,LDLNEC ;UNLESS USER LEVEL AND HE SAID NO
IFN FTMIC,< ;IF MIC
SKIPA T1,LDBDCH(U) ;RESTORE LINE CHARACTERISTICS
JRST XMTIN1 ;NO. STEP TO NEXT CHARACTER
TRNN T1,LDRPTY ;REMOTE OR PTY
JRST TYPE ;NO-JUST TYPE NORMALLY
MOVE T2,LDBMIC(U)
TLNE T2,LDL.XX
JRST TYPEF3
PUSHJ P,TTPTOC ;UPDATE BYTE POINTER, STORE CHARACTER
AOS LDBTOC(U)
TYPEF3: PUSHJ P,PTSTRT
JRST XMTIN1
> ;END OF IF MIC
IFE FTMIC,< ;IF NOT MIC
JRST TYPE ;SEND CHARACTER
JRST XMTIN1 ;NO, STEP TO NEXT CHARACTER
> ;END OF IF NOT MIC
ZAPECH: CONO PI,PIOFF##
SETZM LDBECC(U) ;FIX UP
MOVE T2,LDBTIP(U) ;MESSED UP
MOVEM T2,LDBECT(U) ;ECHOING
CONO PI,PION##
JRST XMTIDL
ECHBRK: PUSHJ P,COMQ ;IS LINE AT COMMAND LEVEL?
PJRST RCVWAK ;NO. WAKE JOB IF ANY.
PJRST COMSET ;YES. SET COMMAND REQUEST.
RCVWKQ: PUSHJ P,COMQ ;IS LINE AT COMMAND LEVEL?
PUSHJ P,RCVWAK ;NO. WAKE JOB.
POPJ P,0 ;YES. DON'T MAKE COMMAND FOR LDLBKA
IFN FTHDPX,<
XMTHDX: JUMPGE T1,XMTIN0 ;HANDLE NORMALLY IF NO XMT EXPECTED
MOVSI T1,L2LHD1 ;FLAG THAT XMT DONE HAPPENED
IORB T1,LDBBY2(U) ; ..
TLNN T1,L2LHD2 ;HAS REC INT OCCURRED ALSO?
POPJ P,0 ;NO. WILL HANDLE WHEN RCV HAPPENS
JRST RHDERQ ;YES. GO SEE IF ERROR IN ECHO
>
SUBTTL RECEIVE INTERRUPT ROUTINE
;HERE FROM DEVICE-DEPENDENT INTERRUPT ROUTINE ON A RECEIVE INTERRUPT.
;AT THIS POINT, T3(28-35) HAS RECEIVED CHARACTER, U HAS PHYSICAL LINE #
;AS INDEX INTO LINTAB
RECINT::
IFN FTMIC,< ;IF MIC
CAMN U,MICLIN ;IS MIC TYPING ON THIS LINE?
POPJ P, ;YES - IGNORE CHAR AT INTERRUPT LEVEL
> ;END OF IF MIC
RECINU: ANDI T3,377 ;JUST 8 BITS OF CHARACTER.
; END OF IF NOT MIC
; CLEAR ANY DEVICE DEPENDENT BITS
IFN FTRSP,< AOS %SCNRI>
MOVE U,LINTAB##(U) ;GET ADDRESS OF LDB.
MOVSI T1,L1LOFL ;PUT TTY ON LINE
ANDCAM T1,LDBOFL(U) ;SINCE SOMEONE IS THERE
IFN FTMODM,<
LDB T1,LDPDSC ;GET DATASET TABLE INDEX
MOVE T1,DSCTAB##(T1) ;GET DATASET DATA
TLNE T1,DSCBLI ;WANT TO IGNORE INTERRUPTS?
JRST RECIN4 ;MAYBE. GO CHECK DATASET BIT
>
MOVEI T1,ST.NRT
TDNE T1,STATES##
JRST [HRR T1,LDBDCH(U)
TRNN T1,LDRDSR
JRST .+1
HRRZ T1,LDBDDB(U)
JUMPN T1,RECIN5
JRST BEATIT]
RECIN5:
IFN FTACCT,<
HRRZ T1,LDBDDB(U) ;ADDRESS OF TTY DDB
SKIPE T1 ;IS THERE ONE?
AOS DDBICC(T1) ;YES, COUNT INPUT CHARACTER
>
IFN FTTRACK,<DPB T3,LDPRCS ;SAVE RECEIVED CHARACTER FOR DEBUG>
IFN FTHDPX,<
MOVE T1,LDBDCH(U) ;SEE IF ITS HALF DUPLEX
TRNE T1,LDRHLF ; ..
JRST RECHDX ;YES. SPECIAL HANDLING
>
RECIN1: HLL U,LDBDCH(U) ;AND DEVICE BITS IN LH.
HRRZ T1,LDBDDB(U) ;TEST FOR PIM, GET DDB ADDRESS
JUMPE T1,RECINR ;NO DDB, CANT BE PIM
MOVE T1,DEVIOS(T1) ;GET DDB WORD WITH MODE IN IT
TRNE T1,PIMMOD ;PIM?
JRST REPIM ;YES, GO TO PIM CODE
RECINR: MOVE T1,TTFREN## ;ANY SPACE FOR CHARACTERS?
CAIG T1,3 ; IN THE FREELIST?
JRST RCHLT1 ;NO. SHUT IT DOWN.
TLNN U,LDLIMI ;IN IMAGE INPUT MODE?
JRST RECIN2 ;NO.
MOVEI T1,IMGTIM ;YES. RESET TIMEOUT FIELD TO MAX
DPB T1,LDPTIM ; ..
TRO T3,400 ;MARK IN NINTH BIT.
JRST RECINA ;AND GO STORE IN BUFFER. NO BREAK.
RECIN2: PUSHJ P,SPCHEK ;SEE IF IT'S SPECIAL. SET T1 UP.
JRST RECIN3 ;NON-SPECIAL. SEE IF LOWER CASE
TLNE T1,CHRIA ;DOES THIS CHAR NEED SPECIAL RCV HANDLING?
JRST 0(T1) ;YES. GO TO IT.
;NO. FALL INTO ORDINARY CHAR HANDLER
IFE FTWATCH,<RICT:>
RECINA: MOVE T2,LDBTIC(U) ;COUNT CHARACTERS LINE HAS INPUT
ADD T2,LDBECC(U) ;PLUS LEFT TO ECHO
PUSH P,T1 ;SAVE CHARACTER BITS
CAILE T2,^D120 ;TIME TO WARN HIM?
JRST RWARN ;YES. GO SEND XOFF.
RWARNX:
PUSHJ P,TTPTIC ;UPDATE BYTE POINTER, STORE CHARACTER
IFN FTMIC,< ;IF MIC
SKIPE LDBMIC(U) ;IS HE RUNNING MIC?
PUSHJ P,MICECH ;YES - SEE IF <CR> TYPED
> ;END OF IF MIC
POP P,T1 ;RESTORE CHARACTER BITS
AOS LDBECC(U) ;COUNT CHARACTER TO ECHO
TLNE T1,CHBRK ;IS THIS A BREAK?
MOVEM T2,LDBBKU(U) ;SAVE FOR CONTROL-U CODE
MOVE S,FLLBSP ;PREPARE BACKSLASH POINTER
MOVSI T2,L2LDEL ;WAS PREVIOUS CHAR A RUBOUT?
TDNN T2,LDBBY2(U) ; ..
JRST RECIN6 ;NO
MOVEM S,LDBFLP(U) ;YES. STORE BACKSLASH FILLER PTR
PUSHJ P,AOSHP ; AND COUNT POSITION OF BACKSLASHES
RECIN6: TLNN T1,CHCNC ;IS THIS CHARACTER A CONTROL C?
TLO T2,L2LCCS ;NO. PREPARE TO CLEAR L2LCCS BIT
ANDCAM T2,LDBBY2(U) ;CLEAR DELETE AND CONTROL C FLAGS
MOVSI T2,LPLPOK ;START LINE IF IDLE
TDNN T2,LDBPAG(U) ;OUTPUT STARTING?
SKIPGE LDBDCH(U) ;OUTPUT IN PROGRESS?
SKIPA ;YES
PUSHJ P,XMTIN1 ;NO. GO START IT UP.
POPJ P,0 ;YES. DISMISS INTERRUPT.
RECIN3: LDB T2,[POINT 7,T3,35] ;GET SEVEN BITS OF CHARACTER
CAIL T2,140 ;LOWER CASE LETTER?
TLNN U,LDLLCT ;YES. WANT TO BE UPPER?
SKIPA
TRC T3,240 ;YES. MAKE UPPER, CORRECT PARITY
LDB T2,LDPACR ;GET AUTO CRLF BYTE
JUMPE T2,RECINA ;IGNORE IF ZERO
TLNN U,LDLCOM
TRNE T3,137 ;SEE IF SPACE
JRST RECINA ;NO--FORGET IT
LDB T4,PHPOS ;GET POSITION
SUBI T4,(T2) ;SEE IF ROOM
JUMPL T4,RECINA ;JUMP IF YES
MOVEI T3,215 ;ELSE CONVERT TO
JRST RECIN2 ;CR
IFN FTMODM,<
RECIN4: MOVE T1,LDBDCH(U) ;GET LINE CHARACTERISTICS
TRNN T1,LDRDSD ;IS IT A DATASET LINE?
JRST RECIN5 ;NO. PROCESS CHARACTER
POPJ P,0 ;YES. DISCARD CHARACTER
>
IFN FTHDPX,<
RECHDX: JUMPGE T1,RECIN1 ;IF NOT OUTPUTTING, TREAT AS KEYBOARD FLAG
MOVE T1,LDBBY2(U) ;OUTPUTTING. CONSIDER ECHO.
TLNE T1,L2LHD3 ;DURING IGNORE TIME?
POPJ P,0 ;YES. IGNORE.
MOVSI T1,L2LHD2 ;FLAG FOR RCV INT
LDB T2,LDPECK ;NO. GET CHAR LAST SENT OUT
CAIE T2,0(T3) ;IS IT CORRECT?
TLO T1,L2LHD5 ;NO. PUT ERROR FLAG IN TOO
IORB T1,LDBBY2(U) ;SET RCV DONE AND ERROR IF ERROR OCCURRED
IFE FT630H,<
TLNN T1,L2LHD1 ;HAS XMT FLAG HAPPENED TOO?
POPJ P,0 ;NO. WAIT FOR IT.
>
RHDERQ: TLNN T1,L2LHD5 ;ERROR ON RCV INT?
JRST XMTIN0 ;NO. PROCESS AS XMT DONE
;YES. FALL INTO ERROR ROUTINE
RHDERR: MOVSI T1,L2LHD4 ;IS THIS AN ERROR OR THE RESPONSE TO IT?
TDNN T1,LDBBY2(U) ; ..
JRST RHDER1 ;ERROR.
ANDCAM T1,LDBBY2(U) ;RESPONSE. CLEAR RESP FLAG
MOVE T2,T3 ;CONSIDER WITHOUT PARITY
ANDI T2,177 ; ..
CAIN T2,"O"-100 ;CONTROL O?
JRST RHDER2 ;YES.
CAIE T2,"C"-100 ;CONTROL C?
JRST XMTIN0 ;NO. RESUME TRANSMIT STREAM
MOVSI T1,L2LCCS ;YES. MAKE IT LOOK LIKE TWO OF THEM
IORM T1,LDBBY2(U) ; ..
RHDER2: MOVSI T1,LDLOIP+LDLIRM ;CLEAR OUTPUT BITS IN LDB
ANDCAM T1,LDBDCH(U) ; ..
JRST RECIN1 ;AND GO PROCESS AS RECEIVE INTERRUPT
RHDER1: MOVSI T1,L2LHD3+L2LHD4 ;ERROR. FLAG FOR IGNORE RCV INTS
IORM T1,LDBBY2(U) ; ..
MOVE T1,TICSEC## ;DELAY FOR HALF SECOND
LSH T1,-1
HRLI T1,ECHO ;COME TO ECHO AFTER DELAY
CONO PI,PIOFF## ;PUT REQUEST IN CLOCK QUEUE
IDPB T1,CLOCK## ; ..
IBP CLOCK## ;TWO WORDS PER ENTRY IN THE CLOCK QUEUE
CONO PI,PION## ; ..
POPJ P,0 ;AND DISMISS INTERRUPT
ECHO: MOVSI J,MTTYLN## ;HERE AT CLK LEVEL. CLEAR TTY IGNORE FLAGS
MOVSI T1,L2LHD3 ;IN ALL TTY LDB'S
ECHOL: HRRZ U,LINTAB##(J) ;GET AN LDB ADDRESS
ANDCAM T1,LDBBY2(U) ;CLEAR IGNORE BIT
AOBJN J,ECHOL ;DO FOR ALL LINES
POPJ P,0 ;RETURN TO CLOCK LEVEL
>
;HERE ON RECEIVE INTERRUPT OF A CONTROL C CHARACTER
IFN FTMIC,< ;IF MIC
RICA: SKIPN LDBMIC(U) ;IS MIC RUNNING FOR US?
JRST RECINA ;NO NORMAL CONTROL CHAR
;YES - FALL INTO RICC
RICC: PUSH P,T1 ;SAVE CHARACTER BITS
SKIPE T1,LDBMIC(U) ;IS MIC RUNNING FOR US?
PUSHJ P,MICRIC ;YES - EXTRA GOODIES
> ;END OF IF MIC
IFE FTMIC,< ;IF NOT MIC
RICC: PUSH P,T1 ;SAVE CHARACTER BITS
> ;END OF IF NOT MIC
PUSH P,T3 ;RIDLN CLOBBERS T3
PUSHJ P,RIDLN ;DO THE CONTROL-U FUNCTION
POP P,T3 ;RECOVER ^C FOR ECHO
MOVSI T1,L2LCCS ;SEE IF SECOND CONTROL C
TDNN T1,LDBBY2(U) ; ..
JRST RICC1 ;NO
IFN FTTPAG,<
MOVSI T1,LPLSTP ;YES - CLEAR STOP BIT
ANDCAM T1,LDBPAG(U)
>
PUSHJ P,CNCCHK ;YES. AM I ALLOWED TO BELIEVE THE CONTROL C?
JRST RICC1 ;SLAVE, OR NOT SECOND. JUST STORE
PUSHJ P,TTHALT ;JACCT AND TWO ^C^C
HRRZ F,LDBDDB(U) ;GET ATTACHED JOB
JUMPE F,RICC3 ;MAKE SURE THERE IS ONE
MOVE T1,DEVMOD(F) ;THERE IS. IS IT ATTACHED?
TLNE T1,TTYATC ;OR JUST USING TTY AS IO DEVICE?
JRST RICC3 ;ATTACHED. OK TO DO CONTROL C
MOVEI S,IODERR ;NOT ATTACHED
IORB S,DEVIOS(F) ;GIVE JOB AN ERROR BIT
PUSHJ P,TTWAKE ;AND WAKE IT UP
SETZM DEVNAM(F) ;MAKE IT INVISIBLE TO DEVSRC
PUSH P,U ;SAVE U IN CASE DDB IS KILLED
PUSHJ P,PTYDET ;GET LINE FREE OF DDB
POP P,U ;RESTORE U
RICC3: POP P,T1 ;RESTORE STACK LEVEL
PUSHJ P,TSETBI ;FORCE ACTION. CLEAR BUFFERS
PUSHJ P,TSETBO ;BOTH INPUT AND OUTPUT. COMCON HAS
; BEEN FLAGGED BY CNCCHK
MOVE T2,FILXCP ;POINTER TO CONTROL C ECHO
JRST RIFRET ;STORE IT AND RETURN
RICC1: MOVSI T1,L2LCCS ;SET "^C LAST IN" BIT
IORM T1,LDBBY2(U) ;NOT SECOND. STORE BIT.
JRST RICC2 ;AND TREAT AS RCV CHARACTER
$LOW
RICD: MOVEI T2,LDRDSR ;DATASET OR REMOTE
TDNE T2,LDBDCH(U) ; ..
JRST RECINA ;YES--SAY ^D
HLRZ T2,CD ;GET INSTRUCTION
CAIE T2,(JSR) ;BREAK POINT
JRST RECINA ;NO--IGNORE
MOVEM 17,CDSAV+17 ;SAVE 17
MOVEI 17,CDSAV ;PLACE TO SAVE ACS
BLT 17,CDSAV+16 ;SAVE THEM
;PLACE BREAKPOINT HERE . . .
CD:: MOVSI 17,CDSAV ;RESTORE ALL ACS
BLT 17,17 ;AND
POPJ P, ;RETURN FROM INTERRUPT
CDSAV: BLOCK 20 ;PLACE TO SAVE ACS AT CD BREAKPOINT
$HIGH
;HERE ON CONTROL H (BACKSPACE) TO DETERMINE HOW TO TREAT
;IN THE VARIOUS CASES LIKE APL ETC.
RIBSP: PUSHJ P,SAVE1## ;SAVE P1
PUSHJ P,STOPCM
HLLZ P1,T1 ;SAVE CHARACTER BITS
LDB T1,LDPAPL ;GET APL BIT
JUMPN T1,RECINA ;JUST STORE IN BUFFER (THIS APL)
IFN FTCAFE&FT2741,<
MOVEI T1,LDR2741 ;IF 2741...
TDNE T1,LDBDCH(U) ;NON APL
MOVEI T3,377 ;ACT LIKE RUBOUT
>;END OF FTCAFE&FT2741
JRST RIDELB
;HERE ON RECEIPT OF A CARRIAGE RETURN (CONTROL M)
RICM: TLNE U,LDLXON ;IS XON TRUE?
JRST RECINA ;YES. NOTHING SPECIAL. STORE.
PUSHJ P,RECINA ;NO. FIRST STORE THE C-R
MOVEI T3,12 ;THEN GET A L-F (EVEN PARITY)
JRST RECIN1 ;AND GO PRETEND IT WAS TYPED IN.
;HERE ON RECEIVE INTERRUPT OF A CONTROL O
RICO: MOVSI T1,LDLOSU ;COMPLEMENT STATE OF OUTPUT SUPPRESS BIT
XORM T1,LDBDCH(U) ;IN LINE DATA BLOCK
DPB T1,LDPSVC ;CLEAR ANY SAVED CHARACTER
PUSHJ P,TSETBO ;CLEAR OUTPUT BUFFER
MOVE T2,FILXOP ;POINTER TO ^O ECHO
JRST RIFRET ;STORE AND RETURN
;HERE TO DISCARD INPUT CHARACTER SUCH AS NULL OR "USED" ^O
RINUL==CPOPJ## ;RETURN FROM RECINT.
;HERE ON RECEIVE INTERRUPT OF A CONTROL Q (XON)
RICQ: PUSH P,T1 ;SAVE CHARACTER BITS
IFN FT5UUO,<
MOVSI T1,L2LTAP ;HAS TTY TAPE COMMAND BEEN TYPED?
TDNN T1,LDBBY2(U) ; ..
JRST RICC2A ;NO. DONT DO ANYTHING SPECIAL
>
MOVSI T1,LDLXON ;TURN ON BIT IN LINE CHAR WD
IORM T1,LDBDCH(U) ; ENTER HERE FOR OTHER BITS TOO
IFN FTNET,< ;ONLY REMOTE USES TAPE CHARACTERISTIC
MOVEI T1,ISRCHP
PUSHJ P,@LDBISR(U) ;TELL REMOTE STATION ABOUT THE ^Q.
>
POP P,T1
JRST CHKXN1
RICC2A:
IFN FTTPAG,<
MOVSI T1,LPLSTP ;CLEAR STOP BIT FOR TTY OUTPUT
ANDCAM T1,LDBPAG(U) ;..
MOVSI T1,LPLPAG ;HAS "SET TTY PAGE" BEEN ENABLED
TDNN T1,LDBPAG(U) ;..
JRST RICC2 ;NO, DON'T DO ANYTHING SPECIAL WITH ^Q
IFN FTNET,<
MOVEI T1,ISRCHP ;TELL REMOTE STATION ABOUT ^Q
PUSHJ P,@LDBISR(U)
>
POP P,T1 ;RESTORE T1
PJRST TOPOKE ;AND GO START OUTPUT AGAIN
> ;IFN FTTPAG
RICC2: POP P,T1 ;RESTORE CHARACTER BITS
JRST RECINA ;AND ACCEPT THE CHARACTER
IFN FTMIC,< ;IF MIC
;HERE ON RECEIVE INTERRUPT OF CONTROL P (PROCEED)
RICP: SKIPN T2,LDBMIC(U) ;IS MIC RUNNING FOR US?
JRST RECINA ;NO - JUST RETURN
TLO T2,LDLCHK!LDL.CP;YES - SET UP ^P FLAG
RICB2: MOVEM T2,LDBMIC(U) ;PUT WORD BACK
RICB3: PUSH P,T1 ;PRESERVE T1
PUSHJ P,MICWAK ;WAKE UP MIC
PJRST TPOPJ## ;RESTORE T1 AND IGNORE THE CHAR
;HERE ON RECEIVE INTERRUPT OF CONTROL B (BREAK)
RICB: SKIPN T2,LDBMIC(U) ;IS MIC RUNNING FOR US?
JRST RECINA ;NO TREAT AS ORDINARY CHAR
TLO T2,LDLCHK!LDL.CB;YES - SET UP ^B FLAG
JRST RICB2 ;AND TREAT AS ^P
> ;END OF IF MIC
;HERE ON A CONTROL T
IFN FTWATCH,<
RICT: PUSHJ P,DOCTLT ;PROCESS THE CONTROL-T
JRST RECINA ;WE WANT TO STORE IT
JRST TTFORC ;WE WANT TO DO USESTAT
JRST RIBUSY ;LINE ALREADY HAS A COMMAND
DOCTLT: LDB T1,LDPRTC ;GET BIT FOR TTY RTCOMPAT
JUMPN T1,CPOPJ## ;IF IT IS =1 GIVE NON-SKIP RETURN
HLL U,LDBDCH(U) ;GET DEVICE FLAGS
TLNE U,LDLSLV ;SLAVE?
JRST CPOPJ## ;YES--DO NOT FORCE CONTROL-T
HRRZ F,LDBDDB(U) ;GET LINKED DDB ADDRESS
JUMPE F,RICT1 ;FORCE COMMAND IF ZERO
MOVE T1,DEVMOD(F) ;GET DEVICE BITS
TLNN T1,TTYATC ;CONTROLING TTY?
JRST CPOPJ## ;NO--JUST STORE THE CONTROL-T
RICT1: MOVEI T1,TTFCXW ;FORCE USESTAT
SKIPL (U) ;COMMAND ALREADY PENDING?
JRST CPOPJ1## ;NO--GIVE SINGLE SKIP
JRST CPOPJ2## ;YES--GIVE DOUBLE SKIP
> ;END FTWATCH
;HERE ON A CONTROL R
RICR: LDB T2,LDPRTC ;GET RTCOMP BIT
JUMPN T2,RECINA ;STORE IF 1
PUSHJ P,FULLCQ ;PASS TO PROGRAM?
JRST RECINA ;YES--STORE IN BUFFER
MOVEI T1,TTFCXT ;FORCE THE .TYPE
SKIPGE (U)
JRST RIBUSY
PUSHJ P,TTFORC ;COMMAND
MOVE T2,FLLBSC ;GIVE A FREE
PJRST RIFRET ;CRLF
;HERE ON RECEIVE INTERRUPT OF CONTROL S (XOFF)
RICS: PUSH P,T1 ;SAVE CHARACTER BITS
MOVSI T1,LDLXON ;CLEAR THIS BIT
ANDCAM T1,LDBDCH(U) ;IN LINE CHARACTERISTICS WORD
IFN FTTPAG,<
MOVSI T1,LPLPAG ;HAS "SET TTY PAGE" BEEN ENABLED?
TDNN T1,LDBPAG(U) ;...
JRST RICC2 ;NO, DON'T DO ANYTHING SPECIAL
MOVSI T1,LPLSTP ;SET STOP BIT FOR OUTPUT
IORM T1,LDBPAG(U) ;NO MORE OUTPUT UNTIL XON IS TYPED
MOVEI T1,ISRCHP ;GET DISPATCH OFFSET FOR CHP
PUSHJ P,@LDBISR(U) ;TELL REMOTE STATION (AND RSX-20F) ABOUT ^S
PJRST TPOPJ## ;DO NOT ECHO CHARACTER OR PUT IT IN INPUT STREAM
> ;IFN FTTPAG
IFE FTTPAG,<
JRST RICC2
>
BEATIT: SKIPA T2,[POINT 9,GAWTXT-1,26]
RIBUSY: MOVE T2,[POINT 9,BSYTXT]
JRST RIFRET
BSYTXT: BYTE (9)134,102,125,123,131,FLLFLG
GAWTXT: BYTE (9)123,324,101,116,104,240,101,314,317,116,305,FLLFLG
;PACKED IMAGE MODE (PIM) RECEIVE CHARACTER PROCESSING
REPIM:
IFN FTTPAG,<
MOVSI T2,LPLPAG
TDNN T2,LDBPAG(U) ;HAS SET TTY PAGE BEEN DONE?
JRST REPIM3 ;NO, DONT LOOK FOR XON/XOFF
CAIE T3,221 ;THIS CHARACTER AN XON?
CAIN T3,21 ;IN EITHER PARITY?
JRST RICQ ;YES, TREAT AS NON PIM XON
CAIE T3,223 ;OR IS IT AN XOFF
CAIN T3,23 ;
JRST RICS ;TREAT AS NON PIM XOFF IF SO
>;END OF FTTPAG
REPIM3: MOVE T2,LDBTIC(U) ;# OF CHARS INPUT
CAMG T2,RPIMWN ;TIME TO WARN HIM?
JRST REPIM2 ;NO, NOT YET
SUBI T2,^D20 ;IS HE OVER 20 CHARS?
CAMLE T2,RPIMWN ;OVER CURRENT LIMIT?
CAMG T2,RPIMW1 ;AND PREVIOUS?
SKIPA ;NO, OK
JRST [MOVE T1,LDBPAG(U)
TLNN T1,LPLXOF ;SENT XOF YET?
JRST RPIM25 ;NO, DO IT NOW
JRST RCHLT1] ;YES, EAT CHAR
RPIM25: MOVSI T2,LPLXOF ;YES, SET UP FOR XOFF
IORM T2,LDBPAG(U) ;FLAG FOR NEXT SEND
MOVE T2,FLPXOF ;SETUP XOF CHAR
MOVEM T2,LDBXNP(U) ;INTO LDB
PUSH P,T3 ;SAVE T3
PUSHJ P,TOPOKE ;START OUTPUT IF NECESSARY
POP P,T3 ;RESTORE T3
REPIM2:
MOVE T1,TTFREN## ;FREELIST COUNT
CAIG T1,3 ;ANY SPACE IN FREELIST?
JRST RCHLT2 ;NO, SHUT IT DOWN
TRO T3,400 ;MARK NINTH BIT
PUSHJ P,TTPTIC ;UPDATE BYTE POINTER, STORE CHARACTER
AOS LDBTIC(U) ;UPDATE LDBTIC COUNT OF CHARS
MOVEM T2,LDBECT(U) ;MAKE CHAR LOOK ECHOED
SKIPN T2,LDBPBK(U) ;GET AND TEST BREAK CHARACTER WORD
JRST RCVWAK ;NOTHING SPECIFIED, BREAK ON ALL
ANDI T3,377 ;CLEAR NINTH BIT FOR TEST
REPIM1: LSHC T1,9 ;GET TEST CHARACTER
XOR T1,T3 ;XOR WITH RECEIVED CHAR
TRNN T1,377 ;MATCH?
JRST RCVWAK ;YES, BREAK CHAR, WAKE AND DISMISS
JUMPE T2,CPOPJ## ;DONE, DISMISS INTERRUPT
JRST REPIM1 ;NO, TRY NEXT
;HERE ON A CONTROL U AT INTERRUPT LEVEL ONLY
RICU: PUSHJ P,FULLCQ ;BREAK ON ALL CHARACTERS?
JRST RECINA ;YES. STORE THE ^U IN BUFFER
PUSHJ P,RIDLN ;NO? DELETE THE CURRENT LINE
SKIPGE LDBDCH(U) ;TYPEOUT BUSY?
JRST RINUL ;YES. JUST DISCARD THE ^U
MOVE T2,FILXUP ;ELSE ECHO IT
JRST RIFRET ;GO PRINT FILLER
RIDLN: PUSHJ P,STOPCM ;STOP COMCON
SKIPN T1,LDBBKU(U) ;ANY BREAK POSITION SAVED?
PJRST TSETBI ;NONE THERE. MEANS ONLY THIS LINE IN BFR
RIDLN1: MOVE T1,LDBBKU(U) ;GET CONTROL-U POINTER
CAME T1,LDBTIP(U) ;ANYTHING TO DELETE ?
PUSHJ P,DELCHR ;DELETE 1 CHAR
POPJ P,0 ;NOTHING LEFT TO DELETE
JRST RIDLN1 ;LOOP OVER LINE
DELCHR: MOVE T2,LDBTIP(U) ;GET POINTER TO INPUT STREAM
CAMN T2,LDBTIT(U) ;BUFFER EMPTY?
POPJ P,0 ;YES--NON-SKIP RETURN
SOSGE LDBECC(U) ;REDUCE ECHO COUNT AND SEE IF ANY
JRST ZAPECC ;NO MORE ECHOES
DELITE: PUSHJ P,DBP ;DECREMENT COPY OF LDBTIP
PUSHJ P,TTGETC ;SKIP ANY LINK
JFCL ;WE WANT TO STORE NEW POINTER
TRNN T2,-1 ;IF NO PREDECESSOR
MOVE T2,LDBTIT(U) ;MOVE PUTTER TO TAKER
MOVEM T2,LDBTIP(U) ; IN ALL CASES
SKIPN LDBECC(U) ;HAD CHAR BEEN ECHOED
MOVEM T2,LDBECT(U) ;TIP HAS BACKED OVER ECT
JRST CPOPJ1## ;NO
ZAPECC: SETZM LDBECC(U) ;YES--RESTORE ECC
SOSL LDBTIC(U) ;AND UPDATE TIC
JRST DELITE ;ALL OK. DELETE ANOTHER
ZAPIN: CONO PI,PIOFF## ;OOPS, COUNT WENT NEGATIVE
SETZM LDBBKC(U)
SETZM LDBTIC(U)
SETZM LDBECC(U) ;CLEAN UP INPUT
MOVE T2,LDBTIT(U) ; COUNTERS AND
MOVEM T2,LDBTIP(U) ; POINTERS,
MOVEM T2,LDBECT(U) ; INCLUDING ECHO
CONO PI,PION##
POPJ P, ;EXIT NO MORE DELETES
RWARN: CAIGE T2,^D300 ;IF HE IS WAY OVER,
SKIPG TTFREN## ; OR WE ARE OUT OF CHUNKS,
JRST RECHLT ; THEN TOSS THE INPUT CHAR.
MOVE T1,LDBPAG(U) ;SEE IF WE HAVE SENT AN XOFF,
TLNE T1,LPLXOF ; AND IF WE HAVE, THEN
JRST RWARNX ; DON'T SEND ONE AGAIN
MOVSI T1,LPLXOF ;MARK THAT AN XOFF WAS SENT
IORM T1,LDBPAG(U) ;THIS GUARANTEES AN XON LATER
IFN FTNET,<
PUSH P,T3 ;SAVE T3
MOVEI T3,1 ;CODE TO WARN OF LOW BUFFER
MOVEI T1,ISRREM
PUSHJ P,@LDBISR(U) ;INFORM THE ISR
SKIPA T2,FLPXOF ;NORMAL RETURN, BUT GIVE HIM XOFF
JRST RWNX ;DONT SEND THE XOFF (DC72 HAS)
>
IFE FTNET,<
MOVE T2,FLPXOF ;NO BUT GIVE HIM XOFF
>
MOVEM T2,LDBXNP(U) ;STORE FOR OUTPUT SERVICE
IFN FTNET,<
RWNX: POP P,T3 ;RESTORE CHAR
>;END IFN FTNET
JRST RWARNX ;CONTINUE INPUT ROUTINE
RECHLT: POP P,T1 ;RESTORE T1 AND PASSDOWN LIST
RCHLT1: MOVE T1,FLPBEL ;THIS IS TOO MUCH. TELL HIM
MOVEM T1,LDBXNP(U) ;BY A BELL
IFN FTNET,<
MOVEI T3,2 ;CODE FOR CHAR NOT STORED
MOVEI T1,ISRREM
PUSHJ P,@LDBISR(U) ;TELL THE ISR CHAR NOT STORED
>
RCHLT2: PUSHJ P,TOPOKE ;START TYPING IF NEEDED (USUALLY NOT NEEDED)
PJRST ECHBRK ;TRY TO WAKE JOB, THEN
;DISMISS INTERRUPT, JUNKING CHARACTER
RECVRG: PUSHJ P,GETCHK ;GET A FREELIST CHUNK
MOVEM T2,LDBTIP(U) ;SET POINTERS TO INPUT LIST
MOVEM T2,LDBTIT(U) ; ..
MOVEM T2,LDBECT(U) ;AND THE ECHO POINTER
SETZM LDBBKU(U) ;BREAK LOCATION
POPJ P,0 ;RETURN
;HERE ON A RUBOUT AT INTERRUPT LEVEL
RIDEL: PUSHJ P,SAVE1## ;SAVE P1
PUSHJ P,STOPCM
HLLZ P1,T1 ;SAVE CHARACTER BITS
RIDELB: PUSHJ P,FULLCQ ;BREAK ON ALL CHARS, OR FCS?
JRST RECINA ;YES. STORE THE RUBOUT
TLNE U,LDLXON ;PAPER TAPE IN EFFECT?
JRST RINUL ;YES. DISCARD RUBOUT
MOVE T1,LDBTIT(U) ;IS BUFFER EMPTY?
CAMN T1,LDBTIP(U) ;IS BUFFER EMPTY?
JRST RIDEL1 ;YES--GIVE CRLF
MOVE T1,LDBTIC(U)
ADD T1,LDBECC(U)
JUMPE T1,RIDEL1
MOVE T2,LDBTIP(U) ;GET ADDRESS OF INPUT STREAM
CAMN T2,LDBBKU(U)
JRST RIDEL1
PUSHJ P,TTGETC ;GET BACK INPUT CHARACTER
MOVEM T2,LDBTIP(U) ;UPDATED CA
SOSGE LDBECC(U) ;REDUCE ECHO COUNT
JRST DECTIC ;BACKED UP PAST ECHO
RIDEL5: PUSHJ P,DBP ;DECREMENT T2 BY 1 CHAR
PUSH P,T3 ;SAVE CH OVER GETC
PUSHJ P,TTGETC ;DO THIS TO SKIP LINK WORD
JFCL
POP P,T3 ;RESTORE REAL CH.
TRNN T2,-1 ;BACK TO BEGINNING?
MOVE T2,LDBTIT(U) ;YES, CLEAR STREM BY SETTING PUTTER BACK TO TAKER
MOVEM T2,LDBTIP(U) ;POINTER OK, USE IT
SKIPL LDBECC(U) ;WAS IT ECHOED?
JRST RIDEL2 ;NO, DON'T ECHO DELETION, EITHER
SETZM LDBECC(U) ;LEAVE COUNT 0
MOVEM T2,LDBECT(U) ;ALSO BACK UP ECHO POINTER
RIDEL6: TLNN P1,CHDEL ;RUBOUT?
SETZ T3,0 ;NO--SPECIAL ECHO
TLNN U,LDLNEC ;UNLESS NO ECHO
DPB T3,LDPSVC ;SAVE FOR AFTER BACKSLASH
MOVEI T2,1 ;A PHONY BYTE POINTER TO A NULL
TLNE U,LDLNEC ;ECHO OFF?
JRST RIDEL3 ;YES. DON'T OUTPUT
IFN FTCAFE&FT2741,<
MOVEI T3,LDR2741
TDNE T3,LDBDCH(U)
JRST RIDEL3
>
;CONTINUED ON NEXT PAGE
;HERE TO ECHO THE RUBOUT
MOVE T3,LDBDCH(U) ;IF ALREADY
TDNN T3,[LDLLCP,,LDRHLF] ;ECHOED, DON'T BUT DO UPDATE HPOS
MOVE T2,[POINT 9,[BYTE (9)210,0]]
TLNN P1,CHDEL ;RUBOUT OR BACKSPACE
JRST RIDEL4 ;BACKSPACE (ECHO AS SELF)
MOVEI T1,0
MOVE T3,LDBDCH(U) ;DIFFERENT FORMAT IF LOCAL COPY
TDNN T3,[LDLLCP,,LDRHLF]
MOVSI T1,L2LDEL ;WAS DELETE LAST CHARACTER TOO?
TDNN T1,LDBBY2(U) ;IF SO, DON'T OUTPUT ANOTHER BACKSLASH
JRST RIDEL0 ;NO. GO SET UP A BACKSLASH
MOVEI T2,1 ;PHONY BYTE POINTER
JRST RIDEL3 ;GO STORE AND RETURN
DECTIC: SOSL LDBTIC(U) ;NO MORE ECHO COUNT - ANY INPUT?
JRST RIDEL5 ;YES. BACK THAT UP
PUSHJ P,ZAPIN ;NO. WE ARE MESSED UP
JRST RIDEL6 ;CLEAN UP POINTERS AND COUNT AND CARRY ON
RIDEL0: IORM T1,LDBBY2(U) ;STORE THAT THIS IS DELETE
PUSHJ P,AOSHP ;COUNT BACKSLASH POSITION
MOVE T2,FLLBSP ;GET POINTER TO BACKSLASH
JRST RIDEL3 ;GO STORE AND RETURN
RIDEL4: MOVEI T3,10 ;UPDATE HPOS BY
PUSHJ P,ADJHP ; MINUS ONE
PJRST RIDEL3 ;GO STORE AND RETURN
RIDEL1: SKIPGE LDBDCH(U) ;IS OUTPUT IN PROGRESS?
JRST RINUL ;YES. DISCARD RUBOUT
MOVE T2,FLLBSC ;BACKSLASH CRLF
RIFRET:
MOVEI T1,0 ;SET TO START OF LINE
DPB T1,PHPOS ; ..
MOVSI T1,L2LDEL ;INSIDE BACKSLASHES?
TDNN T1,LDBBY2(U) ; ..
IBP T2 ;NO. SKIP BACKSLASH
ANDCAM T1,LDBBY2(U) ;NO LONGER IN BACKSLASHES
RIDEL3: MOVEM T2,LDBFLP(U) ;STORE FILLER POINTER
PUSHJ P,TOPOKE ;START OUTPUT IF NEEDED
RIDEL2: JRST RINUL ;NOW DISCARD RUBOUT
;HERE ON ANY OF THE THREE ALTMODES, TO DECIDE ON CONVERSION TO STDALT
RIALT: PUSHJ P,RIALTO
JRST RECINA
RIALTO: ANDI T3,177 ;CLEAR PARITY
CAIE T3,STDALT ;REAL ALTMODE
MOVEI T1,0 ;NO, ASSUME JUST AN ORDINARY CLEAR
MOVSI T2,LPLALT ;CONVERT OLD ALTMODES?
TDNE T2,LDBPAG(U)
POPJ P, ;NO
MOVEI T3,STDALT ;YES USE THE STANDARD ALTMODE
MOVE T1,CHTABL(T3) ;NOW A BREAK, SO GET ITS BITS
POPJ P, ;STORE WHATEVER THIS DECIDED ON
IFN FTSCLC,<
;RECEIVE INTERRUPT ROUTINE FOR LINE CONTROL TRANSACTIONS
;ENTER HERE FROM DEVICE-DEPENDENT ROUTINE WITH
; TRANSACTION CODE IN T3,
; PHYSICAL LINE # IN U (IDX FOR LINTAB, LDBDCH, ETC)
; U'S RANGE CHECKED BY INTERRUPT ROUTINE
; AC'S & PDL SETUP
LNCREC::MOVE U,LINTAB##(U)
CAIN T3,LNTEHC ;DISPATCH ON CHARACTER CODE IN T3
JRST LNREHC ;ENABLE HUNG CHECK
CAIE T3,LNTDHC
POPJ P, ;ILLEGAL CODE--IGNORE
LNRDHC: MOVEI T3,LDRSHC ;DISABLE HUNG CHECK
IORM T3,LDBDCH(U) ; TURN ON LDRSHC
POPJ P,
LNREHC: MOVEI T3,LDRSHC ;TURN OFF LDRSHC
ANDCAM T3,LDBDCH(U)
POPJ P,
> ;END OF IFN FTSCLC
IFN FTMODM,< ;CODE INCLUDED ONLY IF MODEMS SUPPORTED
;RECEIVE INTERRUPT ROUTINE FOR DATASET TRANSACTIONS
;ENTER HERE FROM DEVICE-DEPENDENT ROUTINE WITH TRANSACTION CODE IN
; T3, DSCTAB INDEX IN U, RANGE ALREADY CHECKED BY INTERRUPT
; ROUTINE, AC'S AND PDL SET UP.
DSCREC::MOVE T2,DSCTAB##(U) ;GET TABLE ENTRY FIRST
TLNE T2,DSCBLI ;IGNORE INTERRUPTS?
POPJ P,0 ;YES. DO SO.
IFN FTPI,<
PUSHJ P,SIGDSC ;SIGNA, DATA SET STATUS CHANGE
> ;END FTPI
CAIN T3,DSTRNG ;DISPATCH ON CODES
JRST DSRRNG ;RING FROM DATAPHONE
CAIN T3,DSTON ;CARRIER ON?
JRST DSRON ;YES.
IFN FTDIAL,<
CAIN T3,DSTPND ;DIALLER WANT ANOTHER DIGIT
JRST DSRPND ;YES
>
DSROFF: CAIN T3,DSTOFF ;OFF INTERRUPT?
TLNN T2,DSCHWC ;YES. DID I THINK HE WAS ON?
POPJ P,0 ;NO. FORGET IT.
TLNN T2,DSCSWC ;DO I THINK HE SHOULD BE ON?
JRST DSROF1 ;NO. JUST GO CLEAR HIM OUT.
MOVEI T1,5 ;YES. TIME OUT IN CASE OF BRIEF FAILURE
DPB T1,DSTMPL ;STORE IN TIME BYTE.
MOVSI T1,DSCHWC ;CLEAR THE CARRIER BIT
ANDCAM T1,DSCTAB##(U) ; ..
MOVSI T1,DSCFAI ;AND FLAG POSSIBLE FAILURE CONDITION
IORM T1,DSCTAB##(U) ; ..
POPJ P,0 ;LET CLOCK TIME HIM OUT NOW.
DSROF1: MOVSI T1,DSCHWC!DSCSWC!DSCIC2
ANDCAM T1,DSCTAB##(U) ;CLEAR ALL THESE BITS IN TABLE
IFN FTDIAL,<
HRRZ T1,DSCTAB##(U) ;GET TTY NUMBER FOR THIS MODEM
CAMN T1,DSDUNI## ;DIALLER CODE USED BY IT?
SETZM TTYDDA## ;YES. CLEAR INTERLOCK TO FREE IT.
>
MOVEI T3,DSTOFF ;AND SEND OFF-COMMAND TO DEVICE
DSCCAL::MOVE T2,DSCTAB(U) ;T2 _ LINE NUMBER
MOVEI T1,ISRDSC ;DATASET CONTROL FUNCTION
MOVE T2,LINTAB##(T2) ;LDB ADDRESS
PJRST @LDBISR(T2) ;DISPATCH TO INTERUPT SERVICE
;SUBROUTINE TO SIGNAL DATA SET STATUS CHANGE
; ENTER T3=TRANSACTION CODE
IFN FTPI,<
SIGDSC::HRRZ T1,LINTAB##(T2) ;GET LDB ADDRESS
HRRZ F,LDBDDB(T1) ;GET ADDRESS OF DDB
MOVE T4,J ;SAVE J
JUMPE F,SIGDS1 ;ALL DONE IF ZERO
LDB J,PJOBN## ;GET JOB NUMBER
JUMPE J,SIGDS1 ;JUMP IF JOB 0 (CAN THAT HAPPEN?)
SIGNAL C$DSET
EXCTUU <MOVEM T3,IBKISW##(M)>
SIGDS1: MOVE J,T4 ;RESTORE J
POPJ P, ;RETURN
>
;STILL IN FTMODM
DSRON:
IFN FTDIAL,<
TLNN T2,DSCDLW ;IN DIALLER WAIT?
JRST DSRON1 ;NO.
MOVSI T1,DSCDLW!DSCEON ;YES. CLEAR FLAGS FOR DIALLER
ANDCAM T1,DSCTAB##(U) ;IN TABLE IN CORE
SETZM TTYDDA## ;FREE UP DIALLER CODE
MOVSI T1,DSCDLC ;SET SUCCESSFUL COMPLETION BIT
IORB T1,DSCTAB##(U) ;IN DATASET CONTROL TABLE
PUSH P,T2 ;SAVE OLD STATUS
PUSHJ P,DSCWAK ;WAKE THE JOB, IF ANY STILL THERE.
POP P,T2 ;RESTORE OLD BITS
>
DSRON1:
IFN FTCAFE,< ;CAFE'S SAY HELLO AFTER AUTOMATIC BAUD DETECT EVEN ON
; LOCAL LINES. THIS ALLOWS USER TO GET SIGN ON MESSAGE
HRRZ T1,DSCTAB##(U) ;GET REAL LINE NUMBER
HRRZ T1,LINTAB##(T1) ;GET ADDRESS OF LDB
MOVE T1,LDBDCH(T1) ;GET DEVICE BITS
TRNN T1,LDRDSD ;IS THIS A REAL DATASET LINE?
JRST DSRON2 ;NO--LOCAL TTY JUST CAME UP
> ;END FTCAFE
TLNE T2,DSCHWC ;HE CAME ON. IS THAT NEWS TO ME?
POPJ P,0 ;I THOUGHT HE WAS ON. FORGET IT.
TLNN T2,DSCSWC ;DO I WANT HIM ON?
JRST DSROF1 ;NO. GO FORCE HIM OFF.
IFN FTGPO2B,<
TLNE T2,DSCFAI+DSCDLW ;A GPO2B MODEM CANNOT BE ALLOWED
POPJ P, ;TO RECOVER UNTIL THE TIMEOUT HAS
;OCCURRED TO FORCE DETACH
;BECAUSE 2B'S GENERATE SPURIOUS CARRIER
;FROM DIAL TONE, BUSY, ETC.
>
MOVSI T1,DSCTMM+DSCFAI ;YES. CLEAR TIME AND FAILURE BITS
ANDCAM T1,DSCTAB##(U) ;IN THE TABLE (STILL IN T2)
MOVSI T1,DSCHWC ;MARK THAT HE CAME ON
IORM T1,DSCTAB##(U) ;IN TABLE
TLNE T2,DSCFAI+DSCDLW ;WAS ALL THIS A BRIEF FAILURE?
POPJ P,0 ;YES. JUST DISMISS, HE'S BACK.
MOVSI T1,DSCBLI+DSCNCR ;NO. NEW GUY. SET BLIND AND DELAY BITS
HRRZ F,LINTAB##(T2) ;LDB
HRRZ F,LDBDDB(F) ;DDB
JUMPE F,DSRN1A ;GO IF NO DDB
MOVE T4,DEVMOD(F) ;CHARACTERS
TLNN T4,TTYATC ;IF CONSOLE
TRNN T4,ASSCON!ASSPRG ;AND NOT ASSIGNED
DSRN1A: TLO T1,^D60 ;SET TIME OUT
IORM T1,DSCTAB##(U) ;IN DATASET CONTROL TABLE
DSRON2: HRRZ U,LINTAB##(T2) ;GET LDB ADDRESS FOR LINE
PUSHJ P,TSETBI ;CLEAR INPUT BUFFER
MOVSI T1,L1LOFL
ANDCAM T1,LDBOFL(U)
SKIPGE DEBUGF##
POPJ P,
HRRZ F,LDBDDB(U) ;GET DDB
JUMPN F,CPOPJ## ;DO NOT RUN INITIA IF THERE IS A
; JOB ON THE LINE
MOVEI T1,TTFCXH ;GET HELLO COMMAND INDEX
JRST TTFORC ;FORCE HELLO COMMAND
> ;END CONDITIONAL ON FTMODM
TTFRC1: AOS (P)
TTFORC::DPB T1,LDPCMX ;STORE FORCED COMMAND INDEX
MOVSI T1,LDBCMR+LDBCMF ;FORCED COMMAND REQUEST.
JRST COMST1 ;SET COMMAND COUNT, IF NEEDED
IFN FTMODM,<
DSRRNG: MOVE T1,STATES## ;PHONE RINGING. MAY I ANSWER?
TRNE T1,ST.NRL ;CHECK THE SCHEDULE COMMAND WORD
POPJ P,0 ;NOT ALLOWED. IGNORE.
IFN FTCAFE,<
HRRZ T1,DSCTAB##(U) ;GET REAL LINE NUMBER
HRRZ T1,LINTAB##(T1) ;GET ADR OF LDB
MOVE T1,LDBDCH(T1) ;GET DEVICE BITS
TRNN T1,LDRDSD ;IS THIS A DATASET LINE?
POPJ P, ;NO
>;END OF IFN FTCAFE
PUSH P,U ;SAVE PTR TO DSCTAB
LDB U,[POINT 9,DSCTAB##(U),35]
HRRZ U,LINTAB##(U) ;GET ;DB PTR
IFN FTLOGIN,<
HRRZ F,LDBDDB(U) ;DDB PTR
JUMPE F,DSRRN2 ;NO JOB, ALL OK
MOVE T1,DEVMOD(F) ;DEVICE BITS
TLNN T1,TTYATC ;CONTROLLING TTY?
JRST DSRRN2 ;NO, SO NO JOB
> ;END OF IFN FTLOGIN
;IF WE GET HERE, WE HAVE RING ON LINE
; WITH A JOB, WHICH IS NOT SUPPOSED
; TO HAPPEN. TO PREVENT SECURITY
; PROBLEMS, WE DETATCH THE JOB
MOVEI T3,TTFCXD ;FORCE DETATCH COMMAND
DPB T3,LDPCMX ; INTO FORCED INDEX
MOVSI T3,LDBCMR+LDBCMF ;FORCE BITS
IORM T3,(U) ; IN LDB
AOS COMCNT## ;WAKE COMMAND SCANNER
PUSHJ P,CMDSET ;SETUP BITS
DSRRN2: POP P,U ;RESTORE DSCTAB PTR
MOVEI T3,0 ;CLEAR VARIOUS
DPB T3,DSTMPL ; TIMERS
MOVSI T1,DSCFAI+DSCTMM ;CLEAR THE MOMENTARY FAILURE BIT
ANDCAM T1,DSCTAB##(U) ; ..
MOVSI T1,DSCSWC+^D30 ;TURN ON ALLOW BIT, AND TIME.
DSRRN1: IORM T1,DSCTAB##(U) ;IN DATASET CONTROL TABLE
MOVEI T3,DSTON ;SEND A TURN-ON COMMAND TO DEVICE-
PJRST DSCCAL ; DEPENDENT ROUTINE, AND DISMISS
IFN FTDIAL,<
DSRPND: TLNE T2,DSCEON ;SENT ALL DIGITS?
POPJ P,0 ;YES. IGNORE REQUEST
MOVEI T1,^D60 ;ONE MINUTE FROM SENDING DIGIT
DPB T1,DSTMPL ;INTO TIME-OUT OF DATASET
MOVSI T1,DSCEON ;FLAG END OF NUMBER SENT, IF TRUE.
ILDB T3,TTYDDA## ;GET ANOTHER DIGIT
CAIN T3,17 ;END OF NUMBER CODE?
JRST DSRPN1 ;YES
ADDI T3,DSTPND ;CONVERT TO TRANSACTION CODE FOR XXXINT
PJRST DSCCAL ;AND SEND IT OUT
DSRPN1: IORM T1,DSCTAB##(U) ;SET FLAG IN TABLE
POPJ P,0 ;DON'T SEND NUMBER
> ;END OF FTDIAL
> ;END OF FTMODM CONDITIONAL
IFE FTMODM,<
DSCREC==:CPOPJ##
>
SUBTTL KA10 CONSOLE TELETYPE SERVICE
IFN FTKA10!FTKI10,<
CTYINT::CONSO CTY,50 ;INTERRUPT FROM CTY?
JRST .-1
JSR SCNSAV## ;YES. SAVE AC'S, SET UP P
MOVEI U,TCONLN## ;PSEUDO LINE NUMBER FOR CTY
CONSO TTY,40 ;INPUT OR OUTPUT
JRST CTYOUT ;OUTPUT.
CTYIN: DATAI CTY,T3 ;INPUT. GET THE CHARACTER
JRST RECINT ;GO PROCESS IT
CTYOUT: CONO CTY,200+SCNCHN## ;CLEAR THE OUTPUT BIT
JRST XMTINT ;AND GO SERVICE INTERRUPT
>;END IFN FTKA10!FTKI10
REPEAT 0,<;CODE WHEN DTE USED TO BE ON PI CHANNEL 1
CTYINT::AOSE CTYIFL## ;INTERRUPT FOR CTY?
JRST .-1 ;NO
CONO PI,CLRCTY## ;CLEAR HAND-MADE INTERRUPT
JSR SCNSAV## ;YES, SAVE ACS
MOVEI U,TCONLN## ;SETUP CTY LINE NUMBER
SKIPN DTEMTI## ;INPUT?
JRST CTYOUT ;NO, SEE IF OUTPUT
CTYIN: SETZM DTEMTI## ;CLEAR INPUT FLAG
MOVE T3,DTEF11## ;GET CHARACTER
PUSHJ P,RECINT ;PROCESS THE CHAR
PJRST @CTYIND## ;AND GO TELL SERVICE INPUT IS DONE
CTYOUT: SKIPN DTEMTD## ;OUTPUT DONE INTERRUPT?
HALT . ;HAS TO BE
SETZM DTEMTD## ;CLEAR FLAG
JRST XMTINT ;PROCESS XFER DONE INTERRUPT
>;END REPEAT 0
SUBTTL FILLERS AND SIMULATION ROUTINES
;ROUTINE TO SET UP FILLERS FOR OUTPUT CHARACTERS
SETFLO: PUSHJ P,SPCHEK ;GET CHARACTER BITS
JFCL ;NON-SPECIAL CHAR RETURN.
TLZ T1,CHUAE+CHALT+CHCRE ;THESE ECHO MODES NOT USED ON OUTPUT
TLO T1,CHFILO ;FLAG OUTPUT-FILLER REQUEST
JRST SETFO1 ;REST OF ROUTINE SAME AS ON INPUT
;ROUTINE TO SET FILLER POINTER FOR INPUT CHARACTERS (ECHOING)
SETFLI: TLNE U,LDLNEC ;NON-ECHOING?
JRST CPOPJ1## ;YES. JUST SKIP RETURN
MOVE T1,LDBDCH(U) ;GET LINE CHARACTERISTICS
TDNE T1,[XWD LDLLCP,LDRHLF] ;LOCAL COPY?
TLNN T1,LDLXON ;AND PAPER TAPE
SKIPA ;NO. SKIP
JRST CPOPJ1## ;YES. NO FILLERS, ELSE GARBLE.
PUSHJ P,ADJHP ;ADJUST POSITION FOR INPUT CHAR
IFN FTCAFE,<
IFN FT2741,<
MOVE T1,LDBDCH(U) ;IS THIS A 2741
TRNE T1,LDR2741 ; ??
JRST CPOPJ1## ;YES--FILLERS DONE BY PDP-11
> ;END FT2741
> ;END FTCAFE
PUSHJ P,SPCHEK ;SET T1 FOR CHAR DESCRIPTOR
JFCL ;IGNORE NON-SPECIAL RETURN
TLNE T1,CHALT ;POSSIBLE ALTMODE
PUSHJ P,RIALTO ;GO CHECK
SETFO1:
IFN FTTVP,<
TLNN T1,CHVPOS ;VERT. POSITIONING?
JRST SETFO3 ;NO
TLNE U,LDLFRM ;YES - NEED TO SIMULATE?
JRST SETFO2 ;NO
MOVSI T2,LPLPAG ;YES - USER WANT TO?(SET TTY PAGE)
TDNN T2,LDBPAG(U)
JRST SETFO2 ;NO
MOVEI T3,12 ;YES - USE LINEFEEDS
JRST SETFI0
SETFO2: SETZM T2 ;CLEAR L.F. COUNTER SINCE WE
DPB T2,LDPPFF ; HAVE FORM FEED HARDWARE
JRST SETFI0
SETFO3:
> ;IFN FTTVP
LDB T2,PHPOS ;GET CHARACTER POSITION ON LINE
TLNE U,LDLDLR ;USER WANT DOLLAR SUPPRESSED?
TLZ T1,CHALT+CHUAE+CHCRE ;YES. DO SO.
TLNE T1,CHUAE ;WILL ^X BE ADDED?
ADDI T2,2 ;YES. ADD 2 TO HPOS
TLNE T1,CHALT ;IS IT GETTING A DOLLARSIGN?
ADDI T2,1 ;YES. COUNT IT.
PUSH P,T1 ;RUNNING OUT OF AC'S
LDB T1,LDPWID ;GET WIDTH OF THIS TTY
CAMG T2,T1 ;NEED FREE CRLF NOW?
JRST SETFI1 ;NO.
MOVE T2,[LDLNFC,,LDRREM] ;YES. DOES USER WANT FREE CRLF?
TDNE T2,LDBDCH(U) ;CHECK IN DATA BLOCK
JRST SETFI1 ;NO. FORGET IT.
LDB T2,LDPFLC ;YES. GET POINTER AS F(FILLERS)
MOVE T2,FLLCRP(T2) ;GET APPROPRIATE POINTER TO STRING
MOVEM T2,LDBFLP(U) ;AND STORE IT IN THE LINE BLOCK
MOVEI T2,0 ;CLEAR HPOS
DPB T2,PHPOS ;IN LDB
DPB T2,POHPOS ;AND OLD HPOS IN CASE OF TABS
MOVSI T2,LDLLCP ;DON'T ECHO INPUT CHARACTER AFTER FREE CRLF
POP P,T1 ;IF THIS FREE CRLF IS ON INPUT,
TLNN T1,CHFILO ; BUT IF OUTPUT, DON'T EAT A CHARACTER
TDNN T2,LDBDCH(U) ;IF LOCAL COPY IS SET
DPB T3,LDPSVC ;SAVE CHARACTER FOR LATER
POPJ P, ;NON-SKIP RETURN (NEEDED CRLF)
SETFI1: POP P,T1 ;RESTORE CHARACTER BITS
TLNN T1,CHFIL ;THIS CHAR NEED FILLERS?
JRST SETFI2 ;NO.
SETFI0: PUSH P,T3 ;SAVE THE CHARACTER
;*** CHAR MUST BE AT 0(P) FOR SIMULATORS ***
;*** EVEN THOUGH THIS IS BAD PRACTICE
IFN FT2741&FTCAFE,<
MOVE T3,LDBDCH(U) ;GET LINE CHARACTERISTICS
TRNE T3,LDR2741 ;IS THIS A 2741?
JRST ZFLPOP ;YES - DC76 WILL DO FILLERS
MOVE T3,(P)
>;END OF IFN FT2741&FTCAFE
ANDI T3,177 ;JUST 7 BITS (NO PARITY)
CAIG T3,15 ;NEED TO CALL ROUTINE FOR IT?
JRST @SETFLD-10(T3) ;YES. GO DO IT.
CAIL T3,21 ;CONTROL Q THRU T?
JRST SETFI6 ;YES. THEY HAVE SPECIAL HANDLERS TOO
LDB T1,LDPFLC ;GET FILLER CODE FOR TERMINAL
JUMPE T1,ZFLPOP ;NO. USER WANT FILLER SUPPRESSED?
SKIPA T2,FILLP1 ;NO. ASSUME ONE FILLER IS ENOUGH
ZFLPOP: MOVEI T2,0 ;POINTER FOR NO FILLERS
FLLPOP: MOVEM T2,LDBFLP(U) ;STORE THE FILLER POINTER
JRST CHPJ1 ;RESTORE CHARACTER AND SKIP RETURN
; SKIP IS BECAUSE T3 IS TO BE TYPED
SETFI2: TLNN T1,CHUAE+CHALT+CHCRE ;ECHO AS ^X OR $ ?
JRST CPOPJ1## ;NO. NOTHING SPECIAL. JUST SEND.
TLNE T1,CHALT ;ALTMODE?
JRST SETFI3 ;YES.
TLNE T1,CHCRE ;ECHO AS UPARROW X CRLF?
JRST SETFI4 ;YES.
TRC T3,300 ;TURN ON 100 BIT, COMPLEMENT PARITY
DPB T3,LDPSVC ;STORE FOR AFTER THE UPARROW
LDB T2,PHPOS ;UPDATE HORIZONTAL POSITION
ADDI T2,1 ;ADD ONE FOR THE ^
DPB T2,PHPOS ;STORE BACK IN LDB
MOVE T2,FLLUPA ;GET POINTER TO UPARROW CONST
SETFI5: MOVEM T2,LDBFLP(U) ;STORE IN LINE BLOCK
POPJ P,0 ;NON-SKIP RETURN, TO FORCE OUT
; THE UPARROW.
SETFI3: PUSHJ P,AOSHP ;COUNT SPACE FOR DOLLARSIGN
MOVE T2,FLLDLR ;GET POINTER TO DOLLARSIGN GRAPHIC
JRST SETFI5 ;GO STORE AND RETURN
;CAN ONLY GET HERE FOR ^Z OR ^C. OTHERS NOT STORED IN INPUT BUFFER
SETFI4: ANDI T3,177 ;NO PARITY
MOVEI T2,0 ;PROTECTION
DPB T2,PHPOS ;RESET HORIZONAL POSITION
CAIN T3,"C"-100 ;CONTROL C?
MOVE T2,FILXCP ;YES. ITS POINTER
CAIN T3,"Z"-100 ;CONTROL Z?
MOVE T2,FILXZP ;YES. ITS POINTER
IBP T2 ;SKIP BACKSLASH
JRST SETFI5 ;STORE ECHO POINTER AND FORCE IT OUT
SETFI6: TLNN U,LDLDLR ;ECHOING GRAPHICS INHIBITED?
TLNE T1,CHFILO ;IS THIS FOR INPUT OR OUTPUT OF ^Q-^T?
JRST FILL1 ;NO GRAPHICS. JUST THROW ON A RUBOUT.
LDB T2,PHPOS ;INPUT. PUT GRAPHIC ECHO OUT
ADDI T2,2 ;ADD TWO TO THE CARRIAGE POSITION
DPB T2,PHPOS ;STORE HORIZONTAL POSITION
MOVE T2,STFLT2-21(T3) ;GET ECHO POINTER FOR CONTROL Q-T
SOS -1(P) ;NON-SKIP RETURN
JRST FLLPOP ;STORE FILLER AND RETURN
;SUBROUTINE AOSHP TO COUNT HPOS IN LDB.
;CALL WITH U SET UP, RESPECTS ALL AC'S
AOSHP: PUSH P,T1 ;SAVE AC T1
LDB T1,PHPOS ;GET COLUMN FROM LINE DATA BLOCK
ADDI T1,1 ;INCREMENT IT
DPB T1,PHPOS ;AND STORE IT BACK
JRST TPOPJ## ;RESTORE T1 AND RETURN
;DISPATCH TO SET FILLERS FOR SOME CHARACTERS
SETFLD: EXP FILLH,FILLI,FILLJ,FILLK,FILLL,FILLM
;POINTERS, CODE AND DATA FOR FILLER CHARACTERS
;HERE FOR A BACKSPACE AND HARDWARE VERTICAL TAB
FILLH:
FILLK2:
IFN FTNET,<
MOVE T1,LDBDCH(U) ;GET TTY BITS
TRNE T1,LDRREM ;REMOTE STATION TTY?
JRST ZFLPOP ;YES, IT DOES ITS OWN FILL.
>
LDB T1,LDPFLC ;GET FILLER-DESCRIPTOR CODE FOR LINE
MOVE T2,FILLHP(T1) ;GET FILLER BYTE POINTER
JRST FLLPOP ;GO STORE AND RETURN.
FLLFLG==:1 ;FLAG TO ADD A CRLF AFTER THIS FILLER
FILXCP: POINT 9,FILXCD ;CONTROL C ECHO
FILXCD: BYTE (9) 134,336,303,FLLFLG ;BACKSLASH, ^C CRLF
FILXUP: POINT 9,FILXUD ;CONTROL U ECHO
FILXUD: BYTE (9) 134,336,125,FLLFLG ;BACKSLASH, ^U CRLF
FILXOP: POINT 9,FILXOD ;CONTROL O ECHO
FILXOD: BYTE (9) 134,336,317,FLLFLG ;BACKSLASH, ^O CRLF
FILXZP: POINT 9,FILXZD ;POINTER TO CONTROL Z ECHO
FILXZD: BYTE (9) 134,336,132,FLLFLG ;BACKSLASH, ^Z CRLF
;DISPATCH FOR ^Q TO ^T ECHOES
STFLT2: POINT 9,FILXQD
POINT 9,FILXRD
POINT 9,FILXSD
POINT 9,FILXTD
FILXQD: BYTE (9) 336,321,21,377,0 ;^Q
FILXRD: BYTE (9) 336,322,22,377,0 ;^R
FILXSD: BYTE (9) 223,336,123,0 ;^S
FILXTD: BYTE (9) 24,336,324,0 ;^T
FILLKP: ;POINTERS FOR BS AND VT
FILLHP: 0 ;NO FILLERS
FILLP2: POINT 9,FILLRZ,8 ;2 FILLERS
POINT 9,FILLRY,8 ;6 FILLERS
POINT 9,FILLRY,8 ;6 FILLERS
FILLLP: ;POINTERS FOR FORMFEED
0 ;NO FILLERS
POINT 9,FILLRX,26 ;12 FILLERS
POINT 9,FILLER,17 ;21 FILLERS
POINT 9,FILLER,17 ;21 FILLERS
FILLJP: ;POINTERS FOR LINEFEED
0 ;NO FILLERS
FILLP1: POINT 9,FILLRZ,17 ;1 FILLER
POINT 9,FILLRY,8 ;6 FILLERS
POINT 9,FILLRY,8 ;6 FILLERS
FLLCRP: POINT 9,FLLCR0 ;TABLE OF POINTERS FOR FREE CRLF'S
POINT 9,FLLCR1
POINT 9,FLLCR2
POINT 9,FLLCR2
FLLCR0: BYTE (9) 215,12,0 ;DATA FOR FREE CRLF'S
FLLCR1: BYTE (9) 215,215,12,377,0
FLLCR2: BYTE (9) 215,215,12,377,377,377,377,377,0
FLLUPA: POINT 9,FLLUP1 ;POINTER TO UPARROW
FLLDLR: POINT 9,FLLUP1,17 ;POINTER TO DOLLARSIGN
FLLUP1: BYTE (9) 336,0,44,0 ;UPARROW AND $, WITH PARITY
FLLBSP: POINT 9,FLLBS1 ;POINTER TO BACKSLASH
FLLBS1: BYTE (9) 134,0,134,FLLFLG ;BACKSLASH DATA
FLLBSC: POINT 9,FLLBS1,17 ;POINTER TO BACKSLASH - CRLF
FLLCOP: 0 ;FILLERS FOR OUTPUT CR
POINT 9,FLLCO1,17 ;ONE EXTRA CR
POINT 9,FLLCO1
POINT 9,FLLCO1
FLLCO1: BYTE (9) 215,215,215,0 ;EXTRA CARRIAGE RETURNS
;HERE TO GENERATE FILLERS OR SIMULATION FOR HORIZONTAL TAB
;PHPOS IS UPDATED ALREADY, BUT POHPOS HAS THE PREVIOUS POSITION,
;LOW ORDER THREE BITS, SO THE TAB SIMULATION CAN BE DONE FROM IT.
FILLI:
IFN FTNET,<
MOVE T1,LDBDCH(U) ;GET TTY BITS
TRNE T1,LDRREM ;REMOTE STATION TTY?
JRST ZFLPOP ;YES, IT DOES ITS OWN FILL.
>
LDB T1,LDPFLC ;GET FILLER COUNT
TLNN U,LDLTAB ;USE TAB, OR MAKE IT OUT OF SPACES?
JRST FILLI1 ;SPACES.
TRNN T1,1 ;FILL CLASS 0 OR 2?
JRST ZFLPOP ;YES, NO FILLERS
LDB T1,POHPOS ;GET OLD POSITION ON LINE.
MOVE T2,FILLP2 ; ASSUME UNDER HALFWAY TO TAB STOP
TRNE T1,4 ;TRUE?
FILL1: MOVE T2,FILLP1 ;NO. NEED JUST ONE FILLERS.
JRST FLLPOP ;GO STORE FILLER POINTER, SEND
; TAB, AND RETURN.
;HERE TO MAKE A TAB OUT OF SOME SPACES.
FILLI1: MOVEI T3,640 ;WILL USE SPACES. DISCARD SAVED
; TAB ON STACK.
; IMAGE BIT BECAUSE HPOS NOW RIGHT
LDB T1,POHPOS ;GET LOW 3 BITS OF OLD HPOS
MOVE T2,FILLIP(T1) ;GET CORRESPONDING POINTER TO SPACES
JRST SCCHPJ ;GO STORE, TYPE FILLERS AND SVC
; AND RETURN.
FILLJ:
IFN FTNET,<
MOVE T1,LDBDCH(U) ;GET TTY BITS
TRNE T1,LDRREM ;REMOTE STATION TTY?
JRST ZFLPOP ;YES, IT DOES ITS OWN FILLS.
>
LDB T1,LDPFLC ;NO, GET FILLER DESCRIPTOR FOR LINE
MOVE T2,FILLJP(T1) ;GET THE CORRESPONDING FILLERS
JRST FLLPOP ;FOR A LINEFEED, AND RETURN.
FILLK: TLNE U,LDLFRM ;THIS LINE HAVE FORM MOTION?
JRST FILLK2 ;YES. USE SAME FILLERS AS BACKSPACE
LDB T1,LDPFLC ;NO. MUST SIMULATE WITH LF'S
MOVE T2,FLLKSP(T1) ;GET SIMULATION POINTER
FILLK1: MOVEI T3,12 ;CLOBBER THE VT OR FF ON STACK
SCCHPJ: DPB T3,LDPSVC ;SAVE CHARACTER FOR AFTER FILLERS
MOVEM T2,LDBFLP(U) ;SET FILLER POINTER
JRST CHPOPJ ;AND NON-SKIP RETURN TO CAUSE FILLERS
FILLL: TLNE U,LDLFRM ;THIS LINE HAVE FORM MOTION?
JRST FILLL1 ;YES. GO SET FILLERS.
LDB T1,LDPFLC ;NO. GET FILLERS FOR LINEFEEDS
MOVE T2,FLLLSP(T1) ;GET POINTER TO LINEFEEDS AND FILLERS
JRST FILLK1 ;GO TO COMMON CODE
FILLL1:
IFN FTNET,<
MOVE T1,LDBDCH(U) ;GET TTY BITS
TRNE T1,LDRREM ;REMOTE STATION TTY?
JRST ZFLPOP ;YES, IT DOES ITS OWN FILLS.
>
LDB T1,LDPFLC ;NO, GET FILLER DESCRIPTOR
MOVE T2,FILLLP(T1) ;GET FILLERS FOR FORMFEED
JRST FLLPOP ;GO STORE THIS POINTER AND RETURN
FILLM: MOVE T2,LDBDCH(U) ;GET TTY BITS
LDB T4,LDPFLC ;GET FILL CLASS
IFN FTNET,<
TRNE T2,LDRREM ;REMOTE STATION TTY?
SETZ T4, ;YES, IT DOES ITS OWN TIMING
>
TLNE T1,CHFILO ;NO, IS THIS FOR IN OR OUTPUT?
JRST FILLM1 ;OUTPUT.
TLNE U,LDLXON ;YES. XON IN EFFECT?
JRST ZFLPOP ;NO LOCAL, OR XON TRUE. THEREFORE,
TDNN T2,[XWD LDLLCP,LDRHLF] ;EITHER TYPE OF LOCAL COPY?
; NO FREE CRLF, OR IT WILL BE ECHOED
JRST FILLM1 ;NO LOCAL COPY
MOVE T2,FLLCRP(T4) ;NEED A FREE LINEFEED.GET CRLF
IBP T2 ;AND COUNT IT PAST CR
JRST FLLPOP ;AND GO STORE RESULT
FILLM1: MOVE T2,FLLCOP(T4) ;GET FILLERS FOR CR OUTPUT
JRST FLLPOP ;GO STORE AND RETURN
RETYPE::SKIPN T1,LDBBKU(U) ;SKIP IF BREAK IN BUFFER
MOVE T1,LDBTIT(U) ;ELSE GET START OF BUFFER
MOVEM T1,TTCMCA ;STORE POINTER
HRRZM U,CMDLIN ;REMEMBER LINE # IN CASE OF CONTROL-U
RETYPL: PUSHJ P,CCTYI ;GET A BYTE.
;YOU MAY THINK WE SHOULD CALL COMTYI, YOU
; ARE WRONG.
CAIN T3,12 ;DONE?
JRST [SETZM CMDLIN ;YES
POPJ P,0] ;RETURN
PUSHJ P,USEARO ;TYPE OUT CHAR, IN ARROW MODE
JRST RETYPL ;LOOP FOR MORE
STOPCM: HLLM U,CMDLIN ;MAKE LH EQUAL
CAMN U,CMDLIN ;OUR LINE?
SETZM TTCMCA ;YES--STOP COMCON
POPJ P,0 ;RETURN
;DATA SENT OUT AS FILLERS
FILLER: BYTE (9) 377,377,377,377 ;BLOCK OF 23 RUBOUTS
BYTE (9) 377,377,377,377
FILLRX: BYTE (9) 377,377,377,377
BYTE (9) 377,377,377,377
FILLRY: BYTE (9) 377,377,377,377
FILLRZ: BYTE (9) 377,377,377,0 ;ZERO TERMINATES THE STRING
KSPACE: BYTE (9) 240,240,240,240 ;BLOCK OF 7 SPACES.
BYTE (9) 240,240,240,0
KLINEF: BYTE (9) 12,12,12,12 ;BLOCK OF 7 LINEFEEDS
BYTE (9) 12,12,12,0
FILLIP: POINT 9,KSPACE ;POINTERS FOR TAB SIMULATION
POINT 9,KSPACE,8
POINT 9,KSPACE,17
POINT 9,KSPACE,26
POINT 9,KSPACE,35
POINT 9,KSPACE+1,8
POINT 9,KSPACE+1,17
0
FLSLD0: BYTE (9) 12,12,12,12 ;LINEFEEDS W/O FILLERS.
FLSKD0: BYTE (9) 12,12,12,0 ; ..
FLSLD1: BYTE (9) 377,377,12,377 ;LINEFEEDS WITH 2 FILLERS.
BYTE (9) 377,12,377,377
BYTE (9) 12,377,377,12
FLSKD1: BYTE (9) 377,377,12,377
BYTE (9) 377,12,377,377
BYTE (9) 12,377,377,0
FLLKSP: POINT 9,FLSKD0 ;POINTERS TO SIMULATE ^K
POINT 9,FLSKD0
POINT 9,FLSKD1
POINT 9,FLSKD1
FLLLSP: POINT 9,FLSLD0 ;POINTERS TO SIMULATE ^L
POINT 9,FLSLD0
POINT 9,FLSLD1
POINT 9,FLSLD1
FLBLXF: BYTE (9) 207,223,377,0 ;DATA - BELL,XOFF,RUBOUT
FLPBEL: POINT 9,FLBLXF ;POINTER TO BELL-XOFF-RUBOUT
FLPXOF: POINT 9,FLBLXF,8 ;POINTER TO XOFF AND RUBOUT
FLLXON: BYTE (9) 21,377,0 ;DATA - XON,RUBOUT
FLPXON: POINT 9,FLLXON ;POINTER TO XON-RUBOUT
SUBTTL TIMING ROUTINE
;SUBROUTINE CALLED EVERY SECOND AT CLOCK LEVEL.
;CHECKS FOR IRMA. TIMES IMAGE INPUT. RUNS MODEMS.
SCNSEC::MOVEI J,TCONLN## ;PREPARE TO SEARCH LINE TABLE
PUSHJ P,SAVE1##
SETZM %SCNAL
SCNSIL: MOVE U,LINTAB##(J) ;GET ADR OF LDB
MOVE T1,LDBDCH(U) ;GET LINE DESCRIPTION WORD
TLNE T1,LDLIMI ;IMAGE INPUT STATE?
PUSHJ P,SCSIMG ;YES. GO TIME IT
MOVE T1,LDBDCH(U) ;SCSIMG CAN CLOBBER THIS
JUMPGE T1,SCNSIN ;OUTPUT IN PROGRESS TRUE?
AOS %SCNAL
TRNE T1,LDRSHC!LDR2741!LDRREM ;YES - HUNG CHECKING?
JRST SCNSIN ;NO
IFN FTHDPX,<
MOVE T1,LDBBY2(U) ;GET HALF DUPLEX FLAGS
TLNE T1,L2LHD3+L2LHD4 ;DURING ECHO FAILURE?
JRST SCNSIN ;YES. DONT DO HUNG CHECK
>
MOVSI T1,LDLIRM ;SET UP SYNC BIT
TDNE T1,LDBDCH(U) ;ON FROM 1 SECOND AGO?
JRST [MOVSI T1,LDLOIP
ANDCAM T1,LDBDCH(U) ;CLEAR OUTPUT IN PROGRESS
PUSHJ P,TOPOKE ;FORCE THE LINE TO GO
MOVSI P1,L1LOFL
MOVEI T1,ISROFL
PUSHJ P,@LDBISR(U)
IORM P1,LDBOFL(U)
JRST SCNSIN] ;LOOK AT NEXT LINE
IORM T1,LDBDCH(U) ;TURN ON SYNC BIT FOR THIS SECOND
SCNSIN: MOVE T1,LDBTIC(U)
ADD T1,LDBECC(U)
SKIPE T1
AOS %SCNAL
SKIPL LDBOFL(U)
JRST SCNSIS
MOVSI P1,L1LOFL
MOVEI T1,ISROFL
PUSHJ P,@LDBISR(U)
SKIPA
ANDCAM P1,LDBOFL(U)
SCNSIS: SOJGE J,SCNSIL
AOS T2,%SCNAL
CAIGE T2,20
MOVEI T2,20
MOVE T1,TTFREN##
IMULI T1,^D12
IDIV T1,T2
CAIGE T1,^D80
MOVEI T1,^D80
EXCH T1,TIWRNN ;STORE NEW LIMIT AND GET PREVIOUS
MOVEM T1,TIWRN1 ;STORE PREVIOUS
SUBI T1,^D20 ;AND PREVIOUS PIM
MOVEM T1,RPIMW1 ;EASIER TO RECOMPUT
MOVE T1,TIWRNN ;GET NEW BACK
SUBI T1,^D20 ;SET UP PRIMWN
MOVEM T1,RPIMWN ;AND SAVE
IFE FTMODM,<
PJRST ISRSEC ;CALL EACH ISR
>
;ELSE FALL THRU INTO DATASET ROUTINE
IFN FTMODM,<
;ROUTINE TO DO ONCE-A-SECOND TIMING OF MODEMS. TIMES OUT INTERVALS
;FROM RING TO CARRIER ON, FROM CARRIER ON TO LEGAL COMMAND,
; AND FROM CARRIER OFF TO HANG UP.
DSCSEC: SKIPL J,DSCPTR## ;GET DATASET CONTROL POINTER
JRST DSCSC1 ;THERE ARE NONE IN THIS CONFIGURATION
HLLZS J ;CLEAR RIGHT HALF FOR INDEXING
DSCSLP: MOVE T1,DSCTAB##(J) ;GET TABLE ENTRY
TLNE T1,DSCBLI ;BLIND STILL ON?
JRST DSCSC3 ;YES.
CONO PI,PIOFF## ;CAN'T ALLOW INTERRUPTS HERE
LDB T3,DSTIMP ;GET THE TIME SINCE RING OR CARRIER FAILURE
SOSL T3 ;COUNT IT DOWN. WAS IT 0?
DPB T3,DSTIMP ;NO. STORE NEW VALUE
JUMPN T3,DSCSNX ;UNLESS NEWLY 0, GO ON TO NEXT
MOVSI T3,DSCFAI+DSCSWC ;CLEAR FAIL AND SOFTWARE BITS
ANDCAB T3,DSCTAB##(J) ; IN CORE
CONO PI,PION## ;OK FOR INTERRUPTS NOW.
IFN FTDIAL,<
TLNE T3,DSCDLW ;IN DIALLER WAIT?
JRST DSCSDF ;YES. DIALLER HAS FAILED.
>
HRRZ U,LINTAB##(T1) ;GET THE LDB ADDRESS
; OF THE RELATED TTY LINE
PUSHJ P,LDBCLR ;CLEAR OUT LDB STATUS
IFN FTLOGIN,<
HRRZ F,LDBDDB(U) ;SEE IF THERE'S A JOB.
JUMPE F,DSCSC2 ;SKIP THIS IF NO JOB
MOVE T1,DEVMOD(F) ;MAY BE A JOB. GET MODE WORD.
TLNN T1,TTYATC ;CONTROLLING A JOB.
JRST DSCSC2 ;NOT A CONTROLLING TTY. NO COMMAND
>
MOVEI T3,TTFCXD ;DETACH COMMAND INDEX
DPB T3,LDPCMX ;STORE IN FORCED COMMAND INDEX BYTE
MOVSI T3,LDBCMR+LDBCMF ;SET FORCED COMMAND BIT
IORM T3,0(U) ;FOR COMMAND SCANNER TO SEE
AOS COMCNT## ;AND WAKE COMMAND DECODER
PUSHJ P,CMDSET
DSCSC2: MOVEI T3,DSTOFF ;SOFTWARE CODE TO TURN OFF DATASET
MOVEI U,0(J) ;TABLE ADDRESS AS LINE NUMBER
PUSHJ P,DSCCAL ;SEND TO APPROPRIATE HARDWARE DEVICE
DSCSNX: CONO PI,PION## ;OK TO INTERRUPT NOW.
AOBJN J,DSCSLP ;COUNT THROUGH ALL LINES
DSCSC1: PJRST ISRSEC ;DO ISR TIMING
;STILL IN FTMODM
DSCSC3: MOVSI T3,DSCBLI ;SET FOR BLIND BIT
TLNE T1,DSCNCR ;NEW CARRIER BIT STILL ON?
MOVSI T3,DSCNCR ;YES. CLEAR IT INSTEAD
ANDCAM T3,DSCTAB##(J) ;CLEAR BIT IN TABLE
JRST DSCSNX ;AND GO ON TO NEXT MODEM
IFN FTDIAL,<
DSCSDF: SETZM TTYDDA## ;CLEAR DIALLER CODE INTERLOCK
MOVEI U,0(J) ;COPY TABLE INDEX
PUSHJ P,DSROF1 ;CLEAR OUT THE HARDWARE FOR THIS LINE.
MOVSI T1,DSCDLF ;FLAG THAT DIALLING LOST
IORB T1,DSCTAB##(J) ; ..
PUSHJ P,DSCWAK ;WAKE THE SLEEPING JOB, IF ANY
JRST DSCSNX ;LOOK FURTHER THRU DSCTAB
DSCWAK: MOVE T1,LINTAB##(T1) ;GET THE LDB ADDRESS FOR THIS DATASET'S TTY
HRRZ F,LDBDDB(T1) ;GET THE DDB, IF ANY
SKIPE T1 ;ANY?
LDB T1,PJOBN## ;YES. GET JOB NUMBER
JUMPE T1,CPOPJ## ;ANY?
PJRST WAKJOB## ;YES. WAKE IT.
> ;END OF FTDIAL
DSTIMP: POINT 6,DSCTAB##(J),17 ;POINTERS TO TIME BYTE
DSTMPL: POINT 6,DSCTAB##(U),17 ;SAME BUT DIFFERENT AC INDEX
;MUST AGREE WITH DSCTMM
> ;END OF FTMODM
ISRSEC: PUSHJ P,SAVE2## ;SAVE P1 AND P2
HRREI P1,TCONLN-1 ;START WITH REAL LOCAL LINE
JUMPLE P1,CPOPJ## ;DON'T SCAN IF NO TTY'S
MOVEI P2,0 ;CLEAR P2
ISRSEL: MOVE U,LINTAB##(P1) ;U _ POINTER TO LDB
MOVEI T1,ISRCHK ;FUNCTION TO CHECK STATUS
HRRZ T2,LDBISR(U) ;GET ISR ADDRESS
CAME T2,P2 ;SAME AS LAST LINE?
PUSHJ P,@LDBISR(U) ;NO--CALL ISR
HRRZ P2,LDBISR(U) ;REMEMBER ADDRESS
SOJG P1,ISRSEL ;LOOK AT ALL THE LINES
POPJ P, ;RETURN
;SUBROUTINE TO TIME THE IMAGE MODE INPUT STATE, SET END OF FILE IF
;IT TIMES OUT, AND FORCE CONTROL C UNLESS SLAVED ON SECOND TIME-OUT
SCSIMG: PUSH P,J ;SAVE COUNTER. WILL BE CLOBBERED.
LDB T3,LDPTIM ;GET THE IMAGE TIME BYTE
SOSL T3 ;COUNT IT DOWN. TOO LOW?
DPB T3,LDPTIM ;NO STORE NEW VALUE.
JUMPG T3,IPOPJ## ;IF NO TIMEOUT YET, GO BACK TO LOOP
HRRZ F,LDBDDB(U) ;GET LINE'S JOB DATA BLOCK
JUMPE F,SCSIM2 ;NO JOB? TIME AGAIN
MOVSI S,FRCEND ;CAUSE UUO ROUTINE TO FORCE END
TDNE S,DEVIOS(F) ;ON YET?
JRST SCSIM1 ;ON ALREADY. PANIC.
IORB S,DEVIOS(F) ;NO. SET IT NOW AND TIME OUT AGAIN
SCSIM2: MOVEI T3,IMGTIM ;SET TIME TO NEXT PANIC
DPB T3,LDPTIM ;STORE IN TIME BYTE
PUSHJ P,RCVWAK ;AND WAKE UP JOB
JRST IPOPJ## ;GO RESTORE J AND RETURN
SCSIM1: MOVSI S,TTYATC ;GET A BIT
TDNE S,DEVMOD(F) ;IS THIS AN I/O DEVICE?
TLNE T1,LDLSLV ;IS THIS A SLAVE TTY?
JRST SCSIM2 ;YES. CAN'T DO CONTROL C
PUSHJ P,CNCMOD ;NO. SET TO COMMAND LEVEL
MOVSI T1,LDBCMF ;FORCE COMMAND
DPB T1,LDPCMX ;CONTROL C INDEX
IORM T1,0(U) ;AND FLAG COMMAND DECODER
PUSHJ P,COMSET ;WAKE UP COMMAND ROUTINE,
JRST IPOPJ## ;RESTORE AC AND RETURN
SUBTTL SUBROUTINES FOR INTERRUPT LEVEL CODE
;SUBROUTINE TO SEND A CHARACTER TO A LINE KNOWN TO BE IDLE
;LDB ADR IN LINE, CHAR IN CH.
TYPE:
IFN FTMIC,< ;IF MIC
MOVEI T1,LDRPTY
TDNE T1,LDBDCH(U)
PJRST XMTBFZ
MOVE T1,LDBMIC(U) ;GET THE MIC WORD
TLNE T1,LDL.XX ;WANT OUTPUT SILENCED?
JRST XMTIN0 ;YES - LOOK AS THOUGH WE HAVE A XMT INTERRUPT
MOVSI T1,LDLOIP ;SET OUTPUT IN PROGRESS
> ;IF MIC
IFE FTMIC,< ;IF NOT MIC
MOVSI T1,LDLOIP ;SET OUTPUT IN PROGRESS
> ;END OF IF NOT MIC
IORM T1,LDBDCH(U) ; ..
MOVSI T1,LDLIRM ;CLEAR IRMA FLAG
ANDCAM T1,LDBDCH(U) ;SINCE ACTIVITY HAS NOW OCCURRED
IFN FTACCT,<
HRRZ T1,LDBDDB(U) ;DDB ADDRESS
SKIPE T1 ;IS THERE A DDB?
AOS DDBOCC(T1) ;YES, COUNT THE NUMBER OF CHARACTERS OUTPUTED
>
IFN FTHDPX,<
MOVSI T1,L2LHDM ;CLEAR HDX FLAGS
ANDCAM T1,LDBBY2(U) ; ..
>
LDB T1,LDPLNO ;GET THE HARDWARE LINE NUMBER
IFN FTMS,<IFN FTCTY1,<
CAIN T1,CT1LIN## ;CTY1?
PJRST CT1TYO## ;YES - CODE IN CP1SER
>>
CAIN T1,TCONLN## ;IS IT THE CTY?
JRST CTYTYO ;YES -- SEND OUT THE DATA
MOVEI T1,ISRTYP ;FUNCTION TO XMIT DATA
TYPEX: PJRST @LDBISR(U) ;CALL THE INTERUPT SERVICE ROUTINE
IFN FTKL10,<EXTERNAL CTYTYO ;ITS IN TTDINT>
IFN FTKA10!FTKI10,<
CTYTYO: ANDI T3,377 ;REMOVE JUNK
DATAO CTY,T3 ;SEND TO CONSOLE TTY
IFN FTHDPX!FTTRACK,<
DPB T3,LDPECK ;FOR LIGHTS ONLY (CTY IS FDX)
>
POPJ P,0 ;AND RETURN
>;END IFN FTKA10!FTKI10
;ROUTINE TO ADJUST HORIZONTAL POSITION COUNT FOR CHARACTER TO
;OUTPUT FROM BUFFER. CALL WITH T3, U SET UP.
ADJHP: PUSH P,T3 ;SAVE VIRGIN CHARACTER
TRZ T3,200 ;MASK OFF PARITY BIT
LDB T1,PHPOS ;GET CURRENT LINE POSITION
CAIL T3,40 ;NON-IMAGE CONTROL CHAR?
JRST ADJHP1 ;NO.
CAIN T3,10 ;YES. CHECK FOR THOSE WHICH MODIFY HPOS
SOJGE T1,ADJHPX ;BACKSPACE. COUNT DOWN, STORE IF .GE. 0
CAIN T3,15 ;CARRIAGE RETURN?
JRST ADJHP2 ;YES. CLEAR AND STORE HPOS
CAIE T3,11 ;HORIZ TAB?
JRST ADJHPZ ;NONE OF THESE, OR BS AT START.
DPB T1,POHPOS ;SAVE OLD POSITION FOR FILLER
TRO T1,7 ;ADJUST TO NEXT 8TH COLUMN
AOJA T1,ADJHPX ; AND GO STORE IT.
ADJHP2: MOVEI T1,0 ;CLEAR HPOS TO START OF LINE
ADJHPX: DPB T1,PHPOS ;STORE HPOS AS UPDATED
CHPOPJ:
ADJHPZ: POP P,T3 ;RESTORE REAL CHARACTER
POPJ P,0 ;RETURN FROM ADJHP
ADJHP1: CAIGE T3,177 ;PRINTING CHARACTER?
AOJA T1,ADJHPX ;YES. COUNT BY ONE, GO STORE HPOS
JRST ADJHPZ ;RUBOUT OR IMAGE. DON'T COUNT.
;ROUTINE TO SUPPRESS BLANK LINES
IFN FTTBLK,<
BLKSUP: LDB T1,PHPOS ;HAVE WE MOVED OFF LEFT MARGIN?
HRLI T1,LPLSLF ; (LPLSLF BIT IN LH)
TRZE T1,-1
ANDCAM T1,LDBPAG(U) ;YES - CLEAR BIT TO ALLOW L.F.
CAILE T3,14 ;LF VT OR FF?
CAIN T3,213 ; (VT MAY HAVE PARITY)
CAIGE T3,12
POPJ P, ;NO
CAIN T3,12 ;YES-SUPPRESS LF?
TDNN T1,LDBPAG(U)
SKIPA T3,[12] ;NO-TURN VT OR FF INTO LF
MOVEI T3,377 ;YES-TURN LF INTO RUBOUT
IORM T1,LDBPAG(U) ;SET BIT TO SUPPRESS LF'S
POPJ P,
> ;IFN FTTBLK
;ROUTINE TO ADJUST VERTICAL POSITIONING
;RET+1 IF THIS IS END OF PAGE (FF OR LINE COUNT)
;RET+2 OTHERWISE
IFN FTTVP,<
ADJVP: CAILE T3,14 ;LF VT OR FF?
CAIN T3,213 ; (VT MAY HAVE PARITY)
CAIGE T3,12
JRST CPOPJ1## ;NO - NOTHING TO DO - SKIP RETURN
CAIN T3,14 ;WHAT IS IT? (ADJUST LINE COUNT)
JRST ADJVP4 ;FORM FEED
ADJVP3: LDB T1,LDPPCT
CAIE T3,12
TRO T1,VTAB-1 ;V.TAB.
AOJA T1,ADJVP6 ;LINE FEED
ADJVP4: LDB T1,LDPPSZ
ADJVP5: LDB T2,LDPPCT ;CALC. DISPLACEMENT FROM CURRENT POSITION
SUB T2,T1
MOVNS T2
DPB T2,LDPPFF ;& SAVE FOR POSSIBLE SIMULATION
ADJVP6: LDB T2,LDPPSZ ;GET PAGE SIZE
JUMPE T2,ADJVPX
CAIGE T1,(T2) ;IS COUNT GREATER OR EQUAL?
JRST ADJVPX ;NO
SUB T1,T2 ;YES - RESET COUNT MODULO SIZE
SOS (P) ; & FORCE NON SKIP RETURN
; FOR POSSIBLE "STOP DISPLAY"
ADJVPX: DPB T1,LDPPCT ;STORE NEW COUNT
JRST CPOPJ1## ;& RETURN
> ;IFN FTTVP
;SUBROUTINE TO WAKE UP JOB IF IT IS IN TTY INPUT WAIT. CALL WITH
;LINE SET UP. IT WILL SET DDB AND S AS NEEDED.
RCVWAK: HRRZ F,LDBDDB(U) ;GET ADDRESS OF ATTACHED DDB
JUMPE F,CPOPJ## ;IF NONE,SKIP THIS CODE
IFN FTACCT,<
AOS DDBBCC(F) ;COUNT WAKEUPS
>
IFN FTHIBWAK,< PUSH P,T1 ;SAVE T1
LDB T1,PJOBN## ;GET JOB NUMBER OF TTY OWNER
MOVSI S,TTILCE## ;IS JOB ENABLED FOR WAKE UP
TDNE S,JBTRTD##(T1) ;DURING A HIBERNATE
JRST WAKJB ;YES, GO WAKE JOB
WAKJBR: POP P,T1 ;RESTORE T1
>
MOVE S,DEVIOS(F) ;GET STATUS OF TTY FROM DDB
IFN FTPI,<
TLZ S,IO ;MAKE SURE BIT IS RIGHT
>
TLNE S,IOW ;JOB IN I/O WAIT FOR TTY?
TLNE S,TTYOUW ;YES. FOR INPUT WAIT?
IFN FTPI,<
JRST PSIIOD## ;GENERATE PSI SO USER WILL KNOW I/O IS DONE
>
IFE FTPI,<
POPJ P,0 ;NO--DONT WAKE JOB.
>
TTWAKE::PUSH P,T1 ;SAVE VOLATILE AC'S
PUSH P,T2 ; ..
LDB T1,PJOBN## ;IS JOB # IN DDB ZERO?
JUMPE T1,TTWAKX ;EXIT IF ZERO
MOVE S,DEVIOS(F) ;MAKE SURE S IS CORRECT
IFN FTPSCD,<
MOVE T1,LDBDCH(U) ;LINE CHARACTERISTICS
JUMPL S,TTWAKO ;OUTPUT?
TTWAKI: TRNE T1,LDRPTY ;INPUT. PTY?
AOSA %PISJB## ;YES
AOS %TISJB## ;NO
JRST TTWAKB
TTWAKO: TRNE T1,LDRPTY ;OUTPUT. PTY?
AOSA %POSJB## ;YES
AOS %TOSJB## ;NO
TTWAKB:>
PUSHJ P,STTIOD## ;CALL STTIOD FOR TTYS, PTYS
MOVE S,[XWD IOW,IOACT] ;CLEAR WAIT BITS
ANDCAB S,DEVIOS(F) ;IN DDB FOR THIS JOB
TTWAKX: POP P,T2 ;RESTORE AC'S
PJRST TPOPJ## ;RETURN FROM RCVWAK
;ROUTINE TO SEE IF CHARACTER SPECIAL HANDLING SHOULD BE SUPPRESSED
FULLCQ: PUSHJ P,COMQ ;IS LINE AT COMMAND LEVEL?
TLNN U,LDLBKA+LDLFCS ;NO. DOES USER WANT ALL CHARACTERS?
AOS (P) ;NO. COMMAND OR NOT SMART USER
POPJ P,0 ;SMART USER. NON-SKIP RETURN.
IFN FTHIBWAK,<WAKJB: PUSH P,T2 ;SAVE AC'S
PUSH P,T3
MOVSI T2,(JS.HIB) ;IS JOB SLEEPING
TDNE T2,JBTST2##(T1) ;OR HIBERNATING?
PUSHJ P,WAKJOB## ;HIBERNATING: WAKE THE JOB
POP P,T3 ;RESTORE THE AC'S
POP P,T2
JRST WAKJBR ;RETURN TO NORMAL PROGRAM FLOW
;THE FOLLOWING ROUTINE IS CALLED BY THE HIBERNATE UUO TO
;PUT THE TTY INTO CHARACTER MODE. T1 IS PRESERVED.
HIBTTY::PUSH P,T1 ;SAVE T1
PUSHJ P,TTYFND ;FIND THIS JOB'S TTY
JUMPE U,HIBRET ;NO TTY FOR THIS JOB
MOVSI T1,TTIACE## ;HIBERNATE IN CHARACTER MODE?
TDNN T1,JBTRTD##(J)
JRST HIBTTL ;NO, IT MUST BE LINE MODE
PUSHJ P,TTCCHK ;CHECK IF A CHARACTER IS ALREADY PRESENT
JRST HIBRET ;NO LINE
HIBSET: MOVSI T1,WAKEB## ;LINE OR CHARACTER PRESENT
IORM T1,JBTRTD##(J) ;DON'T HIBERNATE
HIBRET: PJRST TPOPJ## ;RESTORE T1 AND RETURN (TO UUOCON)
HIBTTL: PUSHJ P,TTLCHK ;CHECK FOR A LINE PRESENT
JRST HIBRET ;NO LINE
JRST HIBSET ;YES, DON'T GO TO SLEEP
>
;TABLE OF CONTROL CHARACTERS - LH=BITS, RH=DISP ADDR ON RCV INT
;DEFINITION OF BITS IN THIS TABLE
CHBRK==:1 ;THIS IS A BREAK CHARACTER
CHUAE==:2 ;THIS CHARACTER ECHOES AS ^X
CHFIL==4 ;THIS CHARACTER REQUIRES FILLERS AT SOME SPEEDS
CHALT==10 ;THIS CHARACTER IS ONE OF THE THREE ALTMODES.
CHRIA==20 ;THIS CHARACTER REQUIRES RCV INT LEVEL ACTION
CHCRET==40 ;THIS IS A CARRIAGE RETURN (NEEDED FOR SETFLO)
CHCNC==100 ;THIS IS CONTROL C
CHDEL==200 ;THIS IS DELETE
CHFILO==400 ;BIT ADDED FOR OUTPUT FILLER ROUTINE (NOT IN TABLE)
CHCRE==1000 ;THIS CHARACTER GETS CRLF AFTER ITS ^ X ECHO
CHVPOS==2000 ;VERT. POSITIONING SIMULATED WITH FORM FEEDS
CHEPAR==:400000 ;THIS BIT SET IF CHARACTER IS EVEN PARITY,MUST BE
; SIGN BIT -- THIS BIT IS EXPRESSLY IGNORED BY THE
; SPECIAL CHARACTER CHECK ROUTINE, (SPCHEK) AND IS
; USED FOR PEVEN8
CHTABL: XWD CHRIA+CHEPAR,RINUL ;^@ NUL 000
IFN FTMIC,<
XWD CHRIA+CHUAE,RICA ;^A SOH 001
XWD CHRIA+CHUAE,RICB ;^B STX 002
>
IFE FTMIC,<
XWD CHUAE,0 ;^A SOH 001
XWD CHUAE,0 ;^B STX 002
>
XWD CHUAE+CHBRK+CHRIA+CHCRE+CHCNC+CHEPAR,RICC ;^C ETX 003
XWD CHUAE!CHRIA,RICD ;^D EOT 004
XWD CHUAE+CHEPAR,0 ;^E ENQ 005
XWD CHUAE+CHEPAR,0 ;^F ACK 006
XWD CHBRK,0 ;^G BEL 007
XWD CHBRK+CHRIA,RIBSP ;^H BS 010
XWD CHFIL+CHEPAR,0 ;^I HT 011
XWD CHFIL+CHBRK+CHEPAR,0 ;^J LF 012
XWD CHFIL+CHBRK+CHVPOS,0 ;^K VT 013
XWD CHFIL+CHBRK+CHVPOS+CHEPAR,0 ;^L FF 014
XWD CHRIA+CHFIL+CHCRET,RICM ;^M CR 015
XWD CHUAE,0 ;^N SO 016
XWD CHUAE+CHRIA+CHCRE+CHEPAR,RICO ;^O SI 017
IFN FTMIC,<
XWD CHRIA+CHUAE,RICP ;^P DLE 020
>
IFE FTMIC,<
XWD CHUAE,0 ;^P DLE 020
>
XWD CHUAE+CHFIL+CHRIA+CHEPAR,RICQ ;^Q XON 021
XWD CHUAE+CHFIL+CHRIA+CHBRK+CHEPAR,RICR ;^R TAPE 022
XWD CHUAE+CHRIA+CHFIL,RICS ;^S XOFF 023
XWD CHUAE+CHFIL+CHBRK+CHRIA+CHEPAR,RICT ;^T- NTAPE 024
XWD CHUAE+CHRIA+CHCRE+CHBRK,RICU ;^U NAK 025
XWD CHUAE,0 ;^V SYN 026
XWD CHUAE+CHEPAR,0 ;^W ETB 027
XWD CHUAE+CHEPAR,0 ;^X CAN 030
XWD CHUAE,0 ;^Y EM 031
XWD CHUAE+CHBRK+CHCRE,0 ;^Z SUB 032
XWD CHBRK+CHALT+CHRIA+CHEPAR,RIALT ;^[ ESC 033
XWD CHUAE,0 ;^\ FS 034
XWD CHUAE+CHEPAR,0 ;^] GS 035
XWD CHUAE+CHEPAR,0 ;^^ RS 036
XWD CHUAE,0 ;^_ US 037
0 ;SPACE 040
XWD CHEPAR,0 ;! 041
XWD CHEPAR,0 ;" 042
0 ;# 043
XWD CHEPAR,0 ;$ 044
0 ;% 045
0 ;& 046
XWD CHEPAR,0 ;' 047
XWD CHEPAR,0 ;( 050
0 ;) 051
0 ;* 052
XWD CHEPAR,0 ;+ 053
0 ;, 054
XWD CHEPAR,0 ;- 055
XWD CHEPAR,0 ;. 056
0 ;/ 057
XWD CHEPAR,0 ;0 060
0 ;1 061
0 ;2 062
XWD CHEPAR,0 ;3 063
0 ;4 064
XWD CHEPAR,0 ;5 065
XWD CHEPAR,0 ;6 066
0 ;7 067
0 ;8 070
XWD CHEPAR,0 ;9 071
XWD CHEPAR,0 ;: 072
0 ;; 073
XWD CHEPAR,0 ;.LT. 074
0 ;= 075
0 ;.GT. 076
XWD CHEPAR,0 ;? 077
0 ;@ 100
XWD CHEPAR,0 ;A 101
XWD CHEPAR,0 ;B 102
0 ;C 103
XWD CHEPAR,0 ;D 104
0 ;E 105
0 ;F 106
XWD CHEPAR,0 ;G 107
XWD CHEPAR,0 ;H 110
0 ;I 111
0 ;J 112
XWD CHEPAR,0 ;K 113
0 ;L 114
XWD CHEPAR,0 ;M 115
XWD CHEPAR,0 ;N 116
0 ;O 117
XWD CHEPAR,0 ;P 120
0 ;Q 121
0 ;R 122
XWD CHEPAR,0 ;S 123
0 ;T 124
XWD CHEPAR,0 ;U 125
XWD CHEPAR,0 ;V 126
0 ;W 127
0 ;X 130
XWD CHEPAR,0 ;Y 131
XWD CHEPAR,0 ;Z 132
0 ;[ 133
XWD CHEPAR,0 ;/ 134
0 ;] 135
0 ;^ 136
XWD CHEPAR,0 ;_ 137
;THESE LETTERS ARE LOWER-CASE
XWD CHEPAR,0 ; 140
0 ;A 141
0 ;B 142
XWD CHEPAR,0 ;C 143
0 ;D 144
XWD CHEPAR,0 ;E 145
XWD CHEPAR,0 ;F 146
0 ;G 147
0 ;H 150
XWD CHEPAR,0 ;I 151
XWD CHEPAR,0 ;J 152
0 ;K 153
XWD CHEPAR,0 ;L 154
0 ;M 155
0 ;N 156
XWD CHEPAR,0 ;O 157
0 ;P 160
XWD CHEPAR,0 ;Q 161
XWD CHEPAR,0 ;R 162
0 ;S 163
XWD CHEPAR,0 ;T 164
0 ;U 165
0 ;V 166
XWD CHEPAR,0 ;W 167
XWD CHEPAR,0 ;X 170
0 ;Y 171
0 ;Z 172
XWD CHEPAR+CHRIA,RECINA ; 173
XWD CHRIA,RECINA ; 174
;THE 3 HIGH SPECIALS
XWD CHRIA+CHEPAR+CHALT,RIALT ; 175
XWD CHRIA+CHEPAR+CHALT,RIALT ; 176
XWD CHBRK+CHRIA+CHDEL,RIDEL ; DEL 177
;ROUTINE TO CHECK FOR A SPECIAL CHARACTER AND SET T1 TO ITS DESCRIPTOR
;ENTER WITH T3 SET UP
;SKIPS IF CHAR IS 0-37 OR 175-177
;IGNORES AND DOES NOT RETURN PARITY BIT (CHEPAR)
CHPJ1: AOSA -1(P) ;SKIP RETURN WITH T3 FROM STACK
MOVEI T1,0 ;NON-SPECIAL T1
JRST CHPOPJ ;AND RESTORE T3 AND RETURN
SPCHEK::MOVE T1,T3 ;COPY CHAR
ANDI T1,177 ;CLEAR PARITY
TRNE T3,400
TDZA T1,T1
MOVE T1,CHTABL(T1) ;GET TABLE ENTRY
TLZ T1,CHEPAR ;CLEAR PARITY BIT
SKIPE T1 ;SPECIAL?
AOS (P) ;YES--SKIP
POPJ P, ;RETURN
;SUBROUTINE TO GET EVEN PARITY USING CHEPAR BIT OF CHTABL
;CALLED FROM SCNSER,PTPSER AND IN ONCE
;CALLING SEQUENCE: PUSHJ P,PEVEN8
;ON ENTRY, T3 CONTAINS A CHARACTER IN BITS 28 TO 35,
; BITS 0 TO 27 ARE IGNORED
;ON EXIT, BIT 28 IS CHANGED IF NECESSARY SUCH THAT THE PARITY
; OF BITS 28 TO 35 IS EVEN, AND BITS
; 0 TO 27 ARE ALL 0
PEVEN8::ANDI T3,177 ;CLEAR TO 7 BITS FOR INDEX
SKIPL CHTABL(T3) ;TEST WHETHER TABLE ENTRY INDICATES
;...CHAR ALREADY EVEN PARITY
TRO T3,200 ;WAS NOT, PUT IN PARITY BIT
POPJ P,
SUBTTL CHUNK HANDLERS -- READ FROM BUFFER
;SUBROUTINE TO READ A CHARACTER FROM A TELETYPE BUFFER
;CALL WITH T2 CONTAINING A CP (CHARACTER POINTER) IN THE
;TTCLST (TELETYPE CHARACTER LIST).
;T2 MAY HAVE JUST BEEN IBP'ED OR DBP'ED INTO THE LINK WORD,
;SO THIS CASE MUST BE CONSIDERED AND THE LINKS FOLLOWED.
;THE 9-BIT CHARACTER IS RETURNED IN T3.
;SKIP RETURN IS TAKEN UNLESS A LINK HAS BEEN FOLLOWED, IN WHICH
;CASE, T2 IS UPDATED PAST THE LINK TO THE FIRST OR LAST BYTE IN
;THE RELEVANT CHUNK.
;T1 IS LEFT POINTING AT LINK WORD OF NEW CHUNK IF LINK FOLLOWED
TTGETC: TRNE T2,3 ;POINTING TO A LINK WORD?
JRST TTGC1 ;NO. GO GET THE BYTE.
HRRZ T3,T2 ;GET BYTES ADDRESS
CAML T3,TTBASE ;IS IT IN RANGE?
CAMLE T3,RCCMAX##
PUSHJ P,RCCSTP ;NO
TLNE T2,770000 ;P FIELD 0? IF SO LAST BYTE
JRST TTGC2 ;FORWARD (T2 WAS IBP'ED)
MOVEI T3,0
HLR T2,0(T2) ;GET POINTER
TRNN T2,-1 ;BACKED INTO 0 ?
JRST CPOPJ1## ;YES RETURN 0
SKIPA
TTGC2: HRR T2,-4(T2) ;GET POINTER
TRNN T2,-4 ;MAKE SURE THERE'S AN ADDRESS
STOPCD .,STOP,CL0, ;++CHUNK LINKS TO ZERO
SOS 0(P) ;TAKE NON-SKIP RETURN, NEW T2
HRRZM T2,T1 ;SAVE LOCATION OF THIS CHUNK IN T1
AOS T2 ;INCREMENT POINTER PAST LINKS
TLNN T2,770000 ;WAS POINTER DBP'ED?
ADDI T2,2 ;YES, POINT AT LAST DATA WORD
TTGC1: HRRZ T3,T2 ;DO RANGE CHECK HERE TOO
CAML T3,TTBASE
CAMLE T3,RCCMAX##
PUSHJ P,RCCSTP ;CHUNK OUT OF RANGE!
LDB T3,T2 ;ALLS WELL, GET CHARACTER
JRST CPOPJ1## ;AND RETURN (SKIP IF NOT LINKED)
;SUBROUTINE TO DECREMENT BYTE POINTER BY 1 9-BIT CHARACTER
;CALL WITH T2 CONTAINING POINTER TO BE DBP'ED
;RETURNS WITH T2 UPDATED
DBP: ADD T2,[9B5] ;INCREMENT POINTER P FIELD BY 1 CHAR
SKIPGE T2 ;WRAP?
SUB T2,[44B5+1] ;YES,RESET P FIELD AND ADDRESS
POPJ P,0 ;AND RETURN
TTBASE::0 ;ADDRESS OF FIRST CHUNK
TTTPC: POINT 9,1,8 ;DUMMY POINTER AT FIRST BYTE
SUBTTL CHUNK HANDLERS -- STORE INTO BUFFER
;SUBROUTINE TO PLACE A CHARACTER IN A TELETYPE BUFFER
;CALLING SEQUENCE JUST LIKE TTGETC (ABOVE) EXCEPT ALSO NEEDS THE
; CHARACTER TO PLACE IN BUFFER IN T3(27-35). 9 BITS ARE PLACED.
;IT IS ASSUMED THAT A LIST EXISTS. I.E., T2 NOT ZERO OR IN FIRST CHUNK
; OF THE TTCLST
TTPUTC: TRNE T2,3 ;POINTING TO A LINK WORD?
JRST TTPC1 ;NO. GO PLACE BYTE.
HRRZ T1,T2 ;GET BYTE'S ADDRESS
CAML T1,TTBASE ;TOO SMALL?
CAMLE T1,RCCMAX## ;TOO LARGE?
PUSHJ P,RCCSTP ;OUT OF RANGE
HRRZ T1,-4(T2) ;ASSUME NEED FORWARD LINK.
TLNN T2,760000 ;ERROR IF BACKWARD
STOPCD CPOPJ##,DEBUG,BTL, ;++BACKWARD TTY LINK
JUMPN T1,TTPC2 ;IS THERE ALREADY A FORWARD LINK?
; (PROBABLY NOT)
TTPC3: PUSH P,P1 ;NO. NEED TO GET A CHUNK TO LINK. SAVE P1
PUSH P,T2 ;SAVE AC IN WHICH WE DON'T WANT RESULT
PUSHJ P,GETCHK ;USE COMMON ROUTINE EVEN IF SLIGHTLY SLOWER
POP P,T2 ;RESULT IN T1 & T2
MOVEI P1,0 ;IN CASE NO PREDECESSOR
TRNN T2,-4 ;IS THERE A PREDECESSOR?
TDZA T2,T2 ;NO. CLEAR CA.
MOVSI P1,-4(T2) ;NEW REV LINK IS WHERE T2 CAME FROM,
; AND FWD LINK IS 0 (END)
MOVEM P1,0(T1) ;STORE IN NEW CHUNK
IFN FTTRACK,< ;IF WE CARE
SETZM 1(T1) ;ZERO OUT CHUNK
SETZM 2(T1) ;SO WE ARE NOT
SETZM 3(T1) ;CONFUSED IF WE
> ;USE DDT
SKIPE T2 ;UNLESS NO PREDECESSOR,
HRRM T1,-4(T2) ;LET OLD CHAIN CONTAIN NEW CHUNK
POP P,P1 ;RESTORE THE AC
;CONTINUED ON NEXT PAGE
TTPC2: ADD T1,TTTPC ;MAKE INTO BYTE POINTER
MOVE T2,T1 ;PUT INTO T2
SOS 0(P) ;DON'T SKIP RETURN (NEW T2 VALUE)
TTPC1: HRRZ T1,T2 ;GET ADDRESS
SOS T1 ;...OF CHUNK
CAML T1,TTBASE ;DO RANGE CHECK
CAMLE T1,RCCMAX## ;TOO BIG?
PUSHJ P,RCCSTP ;YES--DIE
DPB T3,T2 ;STORE THE CHAR IN LIST
JRST CPOPJ1## ;SKIP RETURN, UNLESS NEW CHUNK
;SUBROUTINE TO SETUP POINTER TO CHUNKS IF NECESSARY
; ADVANCE THE BYTE POINTER, AND STORE THE
; CHARACTER IN THE INPUT STREAM BY CALLING TTPUTC. CALL WITH THE
; CHARACTER IN T3, ALWAYS RETURNS CPOPJ
TTPTIC: SKIPN LDBTIP(U) ;ANY INPUT PUTTER STRING?
PUSHJ P,RECVRG ;NO, GO SET ON UP
IBP LDBTIP(U) ;COUNT INPUT PUTTER
MOVE T2,LDBTIP(U) ; AND INTO T2
PUSHJ P,TTPUTC ;STORE CHARACTER IN LIST
MOVEM T2,LDBTIP(U) ;NOW CHUNK. STORE POINTER BACK
POPJ P, ;RETURN
;SUBROUTINE WHICH IS THE SAME AS TTPTIC EXCEPT IT PUTS
; THE CHARACTER IN THE OUTPUT STREAM
TTPTOC: SKIPN LDBTOP(U) ;OUTPUT STRING EXIST?
PUSHJ P,TYOVRG ;NO, MAKE ONE
IBP LDBTOP(U) ;COUNT UP OUTPUT CHARACTER ADDRESS
MOVE T2,LDBTOP(U) ; AND GET IT IN T2
PUSHJ P,TTPUTC ;PLACE CHARACTER IN OUTPUT STREAM
MOVEM T2,LDBTOP(U) ;NEW CHUNK, UPDATE POINTER
POPJ P, ; AND RETURN
SUBTTL CHUNK HANDLERS -- FREE A CHUNK
;ROUTINE TO FREE UP A CHUNK OF THE CHARACTER LIST BY FLAGGING IT AS FREE (SETTING LINK WORD = -1)
;ASSUMES THAT TTGETC HAS JUST BEEN
;CALLED AS A RESULT OF AN IBP OF A POINTER ADDRESS TO A LINK WORD, AND
;THAT T1 IS AS TTGETC LEFT IT IN THAT CASE,
;I.E. AT LINK WORD OF THIS CHUNK
;CLOBBERS T1
;CALLED FROM UUO (INPUT) AND INTERRUPT (XMTBUF) LEVELS
FRECHK: PUSH P,T2 ;WILL NEED AN AC FOR WORK
HLRZ T2,0(T1) ;GET BACKWARD LINK OF CURRENT CHUNK
HRRZS 0(T1) ;AND THEN CLEAR IT
SKIPE T2 ;IF BACKLINK=0
SETOM (T2) ;NONE TO FREE UP
AOS TTFREN## ;COUNT THE FREED CHUNK
JRST T2POPJ##
SUBTTL CHUNK HANDLERS -- GET A CHUNK FROM POOL
;ROUTINE TO GET A FREE CHUNK FROM THE POOL, AND RETURN
; ITS ADDRESS IN CA. CLOBBERS T1
GETCHK:
SKIPG TTFREN##
STOPCD .,STOP,FLE, ;++FREE LIST EMPTY
MOVE T1,TTFREE## ;POINT TO CHUNK LAST ASSIGNED
HLRZ T2,TTCLST## ;GET TOTAL # OF CHUNKS
STEPUP: ADDI T1,TTCHKS ;ADVANCE TO LINK WORD OF NEXT CHUNK
CAML T1,RCCMAX## ;HAVE WE GONE TOO FAR?
MOVE T1,TTBASE ;YES. WRAPAROUND
SKIPGE (T1) ;IS THIS CHUNK FREE. NOTE REAL BACK LINK ADDRESS CAN'T BE
JRST FOUND ; IN HIGH SEG (BIT0 CAN'T BE=1)
STEPON: SOJG T2,STEPUP ;NOT FREE. ADVANCE TO NEXT
STOPCD .,STOP,NFC, ;++ NO FREE CHUNKS
FOUND: CONO PI,PIOFF## ;LOOKED FREE. TRY TO GET IT
SKIPGE (T1) ;STILL FREE?
JRST REALLY ;YES
CONO PI,PION## ;SNEAKY US. GOT IT AT A HIGHER INTERRUPT LEVEL
JRST STEPON ;KEEP LOOKING
REALLY: SETZM (T1) ;WE GOT IT. FLAG NO LONGER FREE
MOVEM T1,TTFREE## ;REMEMBER WHERE WE FOUND IT
SOS TTFREN## ;COUNT ONE LESS FREE
CONO PI,PION## ;SAFE NOW
MOVE T2,T1 ;SOME CALLERS WANT IT IN T2, SOME IN T1
IFN FTTRACK,<
SETZM 1(T2)
SETZM 2(T2)
SETZM 3(T2)
>
ADD T2,TTTP1 ;MAKE INTO CHAR POINTER
POPJ P,0 ;RETURN WITH CHUNK IN T2
TTTP1: POINT 9,0,35 ;DUMMY
SUBTTL CHUNK HANDLERS -- CLEAR BUFFERS
;ROUTINES TO CLEAR INPUT AND OUTPUT BUFFERS
TSETBI::TRNN U,-1
STOPCD .,STOP,LNS, ;++LINE NOT SETUP
PUSHJ P,STOPCM
MOVSI T1,LPLIRS
CONO PI,PIOFF##
TDNE T1,LDBPAG(U)
JRST TSETI1
TSETI2: SETZM LDBTIC(U) ;CLEAR COUNTS
SETZM LDBECC(U) ;OF INPUT CHARACTERS
MOVE T1,LDBTIT(U) ;MOVE PUTTERS BACK TO TAKER
MOVEM T1,LDBTIP(U)
MOVEM T1,LDBECT(U) ;NO ECHOING EITHER
SETZM LDBBKU(U)
SETZM LDBBKC(U) ; ..
MOVSI T1,LDLECS ;CLEAR BIT IN LDB WHICH
ANDCAM T1,LDBDCH(U) ; MIGHT CAUSE A LINE TO BE SKIPPED
PUSHJ P,CHKXON ;CHECK IF AN XON MUST BE SENT OUT
PJRST ONPOPJ## ;TURN PI BACK ON AND EXIT
TSETBO::
IFN FTTPAG,<
MOVSI T1,LPLSTP ;CLEAR OUTPUT STOP BIT
ANDCAM T1,LDBPAG(U) ;OUTPUT CAN NOW HAPPEN AGAIN
IFN FTNET,<
MOVEI T3,3 ;CODE FOR CONTROL O PROCESSING
MOVEI T1,ISRREM
PUSHJ P,@LDBISR(U) ;TELL THE ISR
>
>
CONO PI,PIOFF## ;NO PI'S HERE
MOVSI T1,LDLORS ;TEST OUTPUT RACE SYNC
TDNE T1,LDBDCH(U) ;IN LINE BLOCK
JRST TSETO1 ;SYNC ON. DON'T CLEAR BUFFER
IFN FTMLOG,<
TSETO2: SKIPE LDBLOT(U)
JRST MICLGC
SETZM LDBTOC(U) ;NO OUTPUT CHARACTERS LEFT
> ;END OF FTMLOG CONDITIONAL
IFE FTMLOG,< ;IF NOT MIC LOG
TSETO2: SETZM LDBTOC(U) ;NO OUTPUT CHARACTERS LEFT
> ;END OF IF NOT MIC LOG
MOVE T1,LDBTOT(U) ;PUT PUTTER BACK AT TAKER
MOVEM T1,LDBTOP(U) ; ..
JRST ONPOPJ## ;AND RETURN.
TSETO1: MOVEI T1,L2RORH ;OUTPUT RACE HAPPENED BIT
IORM T1,LDBBY2(U) ;INDICATE THIS HAPPENED TO UUO LEVEL
JRST ONPOPJ## ;TURN PI ON AND RETURN
RCCSTP: STOPCD .,STOP,RCC, ;++RANGE CHECKED CHUNK
TSETI1: MOVEI T1,L2RIRH ;INPUT RACE HAPPENED BIT
IORM T1,LDBBY2(U) ;INDICATE THIS HAPPENED TO UUO LEVEL
JRST ONPOPJ##
SUBTTL UUO LEVEL ROUTINES FOR BUFFERED I/O
;DISPATCH TABLE FOR UUO'S AND INITIALIZATION
JRST REGSIZ## ;BUFFER SIZE CAN BE GOTTEN FROM DDB
JRST TTYINI##(P2) ;INITIALIZATION (140 RESTART)
JRST CPOPJ1## ;HUNG DEVICE (NEVER USED)
SCNDSP::JRST TTYREL ;RELEASE
JRST OUT## ;CLOSE OUTPUT
JRST TTYOUT ;TTY OUTPUT UUO
; JRST TTYIN ;TTY INPUT UUO
;FALL INTO TTYIN
;INPUT UUO PROCESSOR - CALLED FROM UUOCON ON INPUT UUO, DDB SET UP
TTYIN: PUSHJ P,SAVE3## ;SAVE P1-P3
PUSHJ P,CKATTI ;MAKE SURE ATTACHED. SET S.
MOVEI T1,DEPAIO ;IS THIS TTY IN ASYNC INPUT
TDNN T1,DEVAIO(F) ; MODE?
JRST TTYINA ;NO--FORGE AHEAD
PUSHJ P,TTLCHK ;IS THERE A LINE THERE?
POPJ P,0 ;NO--RETURN NOW
TTYINA: TRNN S,I ;IMAGE MODE?
JRST TTYIN0 ;NO. SKIP SETUP STUFF
TRNN S,IODERR ;EOF DUE TO ^C ON UNATTACHED LINE?
TLNE S,FRCEND ;CLOCK ROUTINE WANT IT FINISHED?
JRST TTYIN9 ;YES. GO DO SO.
MOVE T1,DEVMOD(F) ;IS THIS GUY ALLOWED IMAGE MODE INPUT?
TRNN T1,ASSCON ;I.E., HE HAS TTY ASSIGNED?
JRST TTYINE ;NO. ERROR BIT TO USER.
MOVSI T1,LDLIMI ;YES. SET IMAGE INPUT IN LINE DATA
IORM T1,LDBDCH(U) ; ..
TTYIN0: PUSHJ P,TWAITL ;BECOME ATTACHED, WAIT FOR LINE
; OR FULL BUFFER CONDITION
TLNE S,FRCEND ;DID WE TIME OUT AT CLOCK
JRST TTYIN9 ;LEVEL WHILE WAITING ?
TTYIN5: HRRZ T1,DEVIAD(F) ;PREPARE AND ADDR CHECK THE
PUSHJ P,BUFCLR## ; USER'S BUFFER
JRST ADRERR## ;OUT OF BOUNDS. STOP JOB.
MOVE P1,DEVIAD(F) ;BUFFER SIZE IN WORDS
IFN FTKI10!FTKL10,<
TLZ P1,R ;WHY PUSHJ TO DO ONE INSTRUCTION?
>
EXCTUX <LDB P2,[POINT 17,@P1,17]>
SUBI P2,1 ;MINUS LINK
TRNE S,PIMMOD ;PACKED IMAGE MODE?
JRST TTPIMI ;YES, COMPUTE PIM BYTE POINTER
TRNN S,I ;UNLESS IMAGE MODE,
IMULI P2,5 ; FIVE ITEMS PER WORD.
HRRZ U,DDBLDB(F) ;RESTORE LINE, CLOBBERED IN UUOCON
HRRZ P1,DEVIAD(F) ;PREPARE BYTE POINTER TO STORE
; THE CHARACTERS IN HIS BUFFER
PUSHJ P,SRLPTR ;SETUP BYTE POINTER FOR ASCIZ OR IMAGE
; AND RELOCATE IT KA OR KI10 STYLE
;THESE BYTE POINTERS MUST BE RELOCATABLE BECAUSE USER
; MAY BE SHUFFLED OR SWAPPED
;FALL INTO MAIN PART OF ROUTINE
TTYIN1: PUSHJ P,TYICC ;GET A CHARACTER
JRST TTYIN3 ; END OF BUFFER.
MOVE P3,T3 ;COPY CHARACTER
ANDI P3,377 ;STRIP IMAGE BIT
EXCTUU <IDPB P3,P1> ;AND STORE IN USER AREA
TRNN S,PIMMOD ;SKIP IF PIM
TLNN T1,CHBRK ;A BREAK?
SOJG P2,TTYIN1 ;NO. LOOP FOR MORE, IF ROOM.
MOVSI S,IOEND ;COUNTED OUT, OR BREAK.
MOVE T1,DEVIOS(F) ;GET USER MODE BITS
TRZ T3,200 ;STRIP OFF PARITY, NOT IMAGE.
TRNN T1,DLRSUP ;NON-SPECIAL MODE AND
CAIE T3,"Z"-100 ;END OF FILE CHARACTER?
MOVEI S,0 ;NO. NOT EOF.
IORB S,DEVIOS(F) ;STORE IN DDB S WORD
TTYIN3: TRNN S,PIMMOD ;BYTE COUNT IF PIM
SKIPA P2,DEVIAD(F) ;NOT PIM - BUFFER PTR IN P2
SKIPA P1,DEVIAD(F) ;PIM - DON'T DESTROY BYTE COUNT
JRST TTYINC ;NOT PIM-WORD COUNT
IFN FTKI10!FTKL10,<
TLZ P1,R
>
EXCTUX <LDB P1,[POINT 17,@P1,17]> ;GET BUFFER SIZE IN WORDS
SUBI P1,1
IMULI P1,4 ;ORIGINAL BYTE COUNT
SUB P1,P2 ;MINUS END=BYTES USED
SKIPA P2,DEVIAD(F) ;ALREADY HAVE COUNT IN P1
TTYINC:
SUBI P1,1(P2) ;COMPUTE WORD COUNT FOR UUOCON
AOS P2 ; TO PUT IN BUFFER HEADER.
IFN FTKI10!FTKL10,<
TLZ P2,R ;RELOCATE IT CORRECTLY FOR PORCESSOR TYPE
>
EXCTUU <HRRM P1,@P2> ;STORE WITH DATA IN RING
PUSHJ P,ADVBFF## ;ON TO NEXT BUFFER
SKIPA ;NO MORE THERE.
JRST TTYIN6 ;MORE TO GO. USE IF IMAGE.
TTYIN8: MOVSI S,IOFST ;SET VIRGIN BUFFER BIT
TTYINX: IORB S,DEVIOS(F) ;IN DEV S WORD IN DDB
HRRZ U,DDBLDB(F)
JUMPE U,CPOPJ##
PJRST NOCTRO ;CLEAR CONTROL O. END OF UUO
TTYIN6: TRNE S,I ;IMAGE MODE?
SKIPG LDBTIC(U) ;AND MORE CHARACTERS TO READ?
JRST TTYIN8 ;NO. QUIT.
JRST TTYIN5 ;YES. GO PASS SOME MORE
;HERE IF ATTEMPT TO PUT UNASSIGNED TTY IN IMAGE INPUT STATE
TTYINE: MOVEI S,IOIMPM
JRST TTYINX ; AND RETURN
TTYIN9: MOVSI S,IOEND ;SET END OF FILE BIT IN S
JRST TTYINX
;PACKED IMAGE MODE, COMPUTE SPECIALISH BYTE POINTER
TTPIMI: IMULI P2,4 ;4 PER WORD
HRRZ U,DDBLDB(F) ;RESTORE LINE,CLOBBERED IN UUOCON
HRRZ P1,DEVIAD(F) ;PREPARE BYTE PTR TO STORE CHARS IN HIS BUFFER
PUSHJ P,SLRPIM ;SET UP POINTER, RELOCATE PROPERLY
JRST TTYIN1 ;AND RETURN TO MAIN PATH.
;OUTPUT UUO CALLS HERE
;CALLED ON OUTPUT OR OUTPUT CLOSE, FROM UUOCON, WITH DDB SET UP.
TTYOUT: PUSHJ P,SAVE2## ;SAVE P1-P2
IFN FTRSP,<
PUSHJ P,RSPTOR## ;RECORD RESPONSE SATISFIED BY TTY OUTPUT
>
TRNE S,IODERR ;^C TYPED?
JRST TTOUT3 ;YES, RETURN
PUSHJ P,CKATOU ;FIRST, MAKE SURE THERE'S A
; PHYSICAL LINE ATTACHED TO JOB, AT USER LEVEL
TRNN S,I ;UNLESS IMAGE MODE,
PUSHJ P,CLRIMI ;CLEAR IMAGE INPUT STATE
MOVSI S,IOBEG ;IS THIS THE FIRST BUFFER AFTER INIT?
TDNN S,DEVIOS(F) ;CHECK DDB
JRST TTOUT1 ;NO.
ANDCAM S,DEVIOS(F) ;YES. CLEAR BEG BIT,
PUSHJ P,NOCTRO ; AND CONTROL O
TTOUT0: SETZM DEVSTS(F) ;CLEAR OLD PARTIAL BYTE POINTER IF ANY
TTOUT1: MOVSI T1,LDLOSU
TDNE T1,LDBDCH(U) ;IS CONTROL O ON NOW?
JRST TTOUT6 ;YES. SKIP THIS WHOLE BUFFER.
IFN FTVM,<
LDB P1,BYTCNT ;RESIDUAL BYTE COUNT
SKIPE DEVSTS(F) ;DEVSTS NON-ZERO?
JUMPE P1,TTOUT6 ;YES, ADVANCE BUFFER IF BYTE COUNT = 0
>
MOVE S,[IO!IOFST,,IOACT] ;MARK START OF NEW OUTPUT
IORB S,DEVIOS(F) ;IN DEVICE DATA BLOCK
HRRZ T1,DEVOAD(F) ;CHECK ADDRESSES OF OUTPUT BLOCK
PUSHJ P,UADRCK## ;GO CHECK BASE (DONT RETURN IF BAD)
MOVE P1,DEVOAD(F) ;GET END OF BUFFER
ADDI P1,1
IFN FTKI10!FTKL10,<
PUSHJ P,RLCPTR ; ..
>
EXCTUX <HRRZ P2,@P1> ; ..
JUMPE P2,TTOUT6 ;SKIP THIS BUFFER IF EMPTY
ADD T1,P2 ;ADD ON BUFFER SIZE
ADDI T1,1 ;ROUND UP (BAD ADDRESS MAY CARRY TO LH)
PUSHJ P,UADRCK## ;CHECK THE RESULTS
TRNE S,PIMMOD ;PACKED IMAGE MODE?
JRST TTPIMO ;YES, GO MAKE PIM BYTE POINTER
TRNN S,I ;OK. NOW GET NUMBER OF ITEMS IN BUFFER
IMULI P2,5 ;FIVE PER WORD UNLESS IMAGE
HRRZ P1,DEVOAD(F) ;CREATE BYTE POINTER TO BUFFER
PUSHJ P,SRLPTR ;SETUP BYTE POINTER FOR ASCIZ OF IMAGE
; AND RELOCATE IT KA OR KI10 STYLE
TTOUTA: SKIPE DEVSTS(F) ;OUTPUT PENDING?
JRST TTOUTB ;USE PARTIAL POINTER
MOVEM P1,DEVSTS(F)
;LOOP TO DUMP OUT USER BUFFER
TTOUT2: PUSHJ P,CKROOM ;SEE IF WE SHOULD CALL TYO
JRST TTOUT7 ;IO WAIT WOULD HAPPEN
EXCTUX <ILDB T3,DEVSTS(F)> ;GET A USER'S CHARACTER
TRNE S,I!PIMMOD ;SEE IF IMAGE MODE OR PIM
TROA T3,400 ;YES. SET BIT FOR SUPPRESSING FILLERS
JUMPE T3,TTOUT5 ;DON'T OUTPUT NULLS
TRNE S,IODERR ;^C TYPED?
JRST TTOUT3 ;YES, EXIT
PUSHJ P,TYO ;OUTPUT THIS CHARACTER (WAIT IF NEEDED)
TTOUT5: SOJG P2,TTOUT2 ;COUNT USER'S ITEMS.
TTOUT6: PUSHJ P,ADVBFE## ;ADVANCE HIS BUFFERS
JRST TTOUT3 ;JUST SINGLE BUFFER FOR NOW
MOVEI T1,DEPAIO ;NON-BLOCKING I/O BIT
TDNE T1,DEVAIO(F) ;DOING NON-BLOCKING I/O
JRST TTOUT0 ;YES, START THE NEXT BUFFER OUT
TTOUT3: SETZM DEVSTS(F)
MOVEI S,IOACT ;CLEAR ACTIVE BIT.
ANDCAB S,DEVIOS(F) ;IN DEVICE DATA BLOCK FOR THE JOB
PTSTRT: JUMPE U,CPOPJ## ;SKIP THIS IF NO LDB EXISTS
MOVEI T1,LDRPTY ;IS THIS A PTY-DRIVEN LINE?
TDNE T1,LDBDCH(U) ; ..
PUSHJ P,PTYPE## ;YES. WAKE IT UP.
POPJ P,0 ;END OF UUO. RETURN TO USER
TTOUT7: DPB P2,BYTCNT ;SAVE BYTE COUNT
MOVEI T1,JS.NTO ;SET THE MAGIC
IORM T1,JBTSTS##(J) ; BIT IN JBTSTS
MOVEI S,IOACT ;CLEAR I/O ACTIVE BIT
ANDCAB S,DEVIOS(F) ;..
POPJ P,0 ;RETURN
TTOUTB: HRRZ T1,DEVSTS(F) ;GET PARTIAL POINTER ADDRESS
PUSHJ P,UADRCK## ;STILL VALID
PUSH P,P3 ;PROTECT AGAINST REMAINDER
LDB T3,[POINT 6,DEVSTS(F),11] ;GET CURRENT S
LDB P2,[POINT 6,DEVSTS(F),5] ; AND P VALUES
IDIV P2,T3 ;BYTES IN CURRENT WORD
MOVE P3,P2 ;SAVE BYTE COUNT OF CURRENT WORD
LDB P2,BYTCNT ;GET TOTAL BYTE COUNT
SUB P2,P3 ;LESS CURRENT WORD
MOVEI T3,5 ;5/WORD FOR ASCII
TRNE S,PIMMOD ;4/WORD FOR PIM
MOVEI T3,4
SETZM P3 ;SO #REMAINDER" IS ZERO FOR IMAGE
TRNN S,I ;ONE/WORD FOR IMAGE
IDIV P2,T3 ;HOW MANY WORDS?
SKIPLE P3 ;REMAINDER?
ADDI P2,1 ;YES
POP P,P3 ;RECOVER
ADDI T1,(P2) ;GET END
PUSHJ P,UADRCK## ;VALID?
LDB P2,BYTCNT ;GET BYTES BACK
JRST TTOUT2
;COMPUTE PACKED IMAGE MODE BYTE POINTER
TTPIMO: IMULI P2,4 ;4 PER WORD
HRRZ P1,DEVOAD(F) ;CREATE BYTE POINTER
PUSHJ P,SLRPIM ;AND SET IT UP
JRST TTOUTA ;AND RETURN TO MAIN STREAM
SLRPIM: ADD P1,[XWD 041000+R,1] ;ASSUME KA POINTER
IFN FTKI10!FTKL10,<
PJRST RLCPTR ;HANDLES RELOCATION IF NECESSARY
>
IFN FTKA10,<
POPJ P,0
>
TTMORE::
IFN FTMS,<
SKPCPU (0)
POPJ P,0
>
PUSHJ P,SAVE2## ;SAVE P1-P2
MOVEI F,SCNDDB ;FIRST DDB
MOVEI P2,JS.NTO ;FLAG RESET
MOVE T1,.C0PC## ;GET THE CURRENT PC
TLNE T1,USRMOD ;IN USER MODE?
MOVEM T1,JOBPD1##(R) ;YES--MAKE SURE JOBPD1 IS RIGHT
MORE10: LDB T1,PJOBN## ;GET OWNER
CAIN T1,(J) ;IS IT THIS JOB?
SKIPN DEVSTS(F) ;IS OUTPUT WAITING?
JRST MORE20 ;NO, TRY NEXT DDB
MOVEI T1,DEPAIO
TDNN T1,DEVAIO(F) ;NON-BLOCKING I/O ON THIS TERMINAL?
JRST MORE20 ;NO, LOOK AT OTHER TERMINALS
PUSHJ P,MORE30 ;GO TRY OUTPUT
MOVEI P2,0 ;FLAG ONE ACTIVE
MORE20: HLRZ F,DEVSER(F) ;PICK UP NEXT DDB
MOVSI T1,DVTTY ;IS THIS A TTY?
TDNE T1,DEVMOD(F) ; ..
JUMPN F,MORE10 ;YES--LOOK AT IT TOO
ANDCAM P2,JBTSTS(J) ;CLEAR THE STATUS
POPJ P,0 ;RETURN
MORE30: HRRZ U,DDBLDB(F) ;GET ADDRESS OF LDB
JUMPE U,CPOPJ## ;PUNT IF DETACHED
MOVE S,DEVIOS(F) ;SET UP S FOR TYO
LDB P1,BYTCNT ;GET THE BYTE COUNT
IFN FTVM,<
JUMPE P1,MORE41 ;IF BYTE COUNT=0 AND DEVSTS NON-0, BUFFER WASN'T ADVANCED
; BECAUSE WHAT DEVOAD POINTED TO WAS PAGED OUT
>
MORE40: PUSHJ P,CKROOM ;ROOM FOR MORE DATA?
JRST [DPB P1,BYTCNT ;NO--SAVE BYTE COUNT
POPJ P,0] ;RETURN
MOVE T1,DEVSTS(F) ;GET POINTER
IBP T1 ;UPDATE POINTER
TLZ T1,-1 ;CLEAR JUNK
PUSHJ P,IADRCK## ;MAKE SURE ITS LEGAL AND IN CORE
JRST MORE50
EXCTUX <ILDB T3,DEVSTS(F)> ;GET THE NEXT BYTE
TRNE S,I!PIMMOD ;IF IMAGE OR PIM
TROA T3,400 ;FLAG IT
SKIPE T3
PUSHJ P,TYO ;TYPE IT
SOJG P1,MORE40 ;DO THE NEXT BYTE
IFN FTVM,<
MORE41: HRRZ T1,DEVOAD(F) ;BUF APR
SOS T2,T1 ;WORD-1
ADDI T2,3 ;THRU WORD1
PUSHJ P,ZRNGE## ;IN CORE?
JRST MORE50 ;NO
>
IFN FTPI,<
TLO S,IO ;FORCE FLAG TO OUTPUT
PUSHJ P,PSIIOD##
>
JRST TTOUT6 ;ALL DONE
MORE50:
IFN FTVM,<
DPB P1,BYTCNT ;SAVE BYTE COUNT
MOVE T3,.C0PC## ;JOB'S PC
TLNN T3,USRMOD ;IN USER MODE?
POPJ P, ;NO, TRY AGAIN LATER
MOVE T3,[EXP IC.UOU+TTYFLT##]
MOVEM T3,.C0PC## ;GO TO TTYFLT
MOVEM T1,.UPMP+.UPUPF ;STORE FAULT ADDRESS
POPJ P,
>
IFE FTVM,<
HLLZS DEVOAD(F) ;ZERO IT TO AVOID IME
JRST TTOUT3 ; AND GIVE UP
>
CKROOM: MOVEI T1,DEPAIO ;IF THIS JOB IS NOT USING
TDNN T1,DEVAIO(F) ; ASYNCHRONOUS I/O THEN
JRST CPOPJ1## ; JUST GIVE THE SKIP RETURN
SKIPLE T1,TTFREN## ;GET THE FREE CHUNK COUNT
CAIG T1,5 ;ENOUGH ROOM?
POPJ P,0 ;NO--QUIT NOW
MOVE T1,LDBTOC(U) ;GET OUTPUT BYTE COUNT
ADDI T1,^D25 ;REDUCE ODDS OF LOSSAGE
CAMG T1,TIWRNN ;TOO MUCH STUFF?
AOS (P) ;NO--CALL TYO
POPJ P,0 ;RETURN
SUBTTL DDT MODE CALLI'S
;INPUT TO DDT - CALL AC,[SIXBIT /DDTIN/] WHERE AC/ ADDR
;ADDR GETS UP TO 21 WORDS OF ASCIZ, BREAKING ON ANY CHARACTER
DDTIN:: PUSHJ P,SAVE2## ;SAVE P1-P2
PUSHJ P,TTYFNU ;SET LINE AND DDB FOR THIS TTY
PUSHJ P,CKATTI ;MAKE SURE TTY ATTACHED
PUSHJ P,GETWDU## ;DO ADDRESS CHECKING FIRST
HRRZS T1
PUSHJ P,IADRCK## ; ..
JRST ADRERR## ;NO GOOD
ADDI T1,21 ;CHECK END OF AREA
PUSHJ P,IADRCK## ; ..
JRST ADRERR## ;NO GOOD
MOVSI P1,440700+R ;SEVEN BIT BYTES, RELOCATED.
HRRI P1,-21(T1) ;IN USER AREA
IFN FTKI10!FTKL10,<
PUSHJ P,RLCPTR ;SET FOR KA OR KI10 RELOCATION
>
MOVEI P2,<21*5>-1 ;NUMBER OF BYTES ALLOWED
PUSHJ P,TWAITC ;GET AT LEAST ONE CHARACTER
DDTINL: SKIPG LDBTIC(U) ;ANY MORE TO COME?
JRST DDTINX ;NO.
PUSHJ P,TYICC ;YES. GO GET ONE
JRST DDTINX ;WASNT ANY. I'M CONFUSED.
TRNE T3,177 ;NULL?
EXCTUU <IDPB T3,P1> ;NO. STORE IN USER AREA
SOJG P2,DDTINL ;IF MORE SPACE, GET ANOTHER CHARACTER
DDTINX: MOVEI T3,0 ;FLAG END OF STRING
EXCTUU <IDPB T3,P1> ; IN USER AREA
PJRST NOCTRO ;AND RETURN TO USER, CLEARING ^O FLAG
;DDTOUT - CALL AC,[SIXBIT /DDTOUT/], AC/ ADDR, ADDR/ ASCIZ /XXX/
DDTOUT::HRR M,T1 ;USER ADR. OF TEXT TO M
PUSHJ P,TTYFNU ;GET USER'S CONSOLE
PUSHJ P,CKATOU ;MAKE SURE AT USER LEVEL AND ATTACHED
JRST OUTSTR ;SAME AS THE CORRESPONDING TTCALL
SUBTTL TTCALL AND TRMOP. -- TTCALL DISPATCH
;TTCALL AC,E - VALUE OF AC DETERMINES ACTION OF UUO (051)
TTYUUO::PUSHJ P,SAVE2## ;SAVE P1,P2
PUSHJ P,TTYFNU ;FIND CURRENT USER'S TTY
MOVE P2,TTUUOT(P1) ;GET PRE-CHECK BITS
TLNE P2,TC.ATW ;ATTACH OR WAIT?
PUSHJ P,CKATTO ;YES. WAIT TILL ATTACHED
TTUUA: TLNN P2,TC.ATR ;ATTACH OR RETURN?
JRST TTUUB ;NO
TRNN U,-1 ;YES. LINE NON-ZERO?
POPJ P,0 ;NO. RETURN, NO TTY
TTUUB: JUMPE U,TTUUD ;ONE UUO-GETLCH-CAN BE HERE DETACHED
HLL U,LDBDCH(U) ;GET LINE DESCRIPTION
TLNN P2,TC.USR ;USER OR RETURN?
JRST TTUUC ;NO
TLNE U,LDLCOM ;YES. USER LEVEL?
POPJ P,0 ;NO. RETURN.
TTUUC: TLNE P2,TC.USW ;USER OR WAIT?
TLNN U,LDLCOM ;YES. AT USER LEVEL
JRST TTUUD ;USER LEVEL, OR NOT NEEDED
PUSHJ P,CKATOU ;TOP LEVEL.WAIT FOR USER.
JRST TTYUUO ;RESTART UUO IN CASE OF
;ATTACH.
TTUUD: TLNN P2,TC.ADC ;ADDRESS CHECK NEEDED?
JRST TTUUE ;NO. GO DISPATCH.
HRRZ T1,M ;ADDRESS TO P1, WHICH IS P1
PUSHJ P,UADCK1## ;CHECK THE ADDRESS
TTUUE: JRST @TTUUOT(P1) ;DISPATCH TO ROUTINE
;THE FOLLOWING TABLE IS USED TO PRE-CHECK AND DISPATCH THE TTCALL'S.
;BITS IN THE LEFT ARE CHECKED BEFORE DISPATCHING.
;INDIRECT AND INDEX MUST BE ZERO, FOR JRST INDIRECT, BUT THIS COULD
;EASILY BE CHANGED IF THE BITS RUN OUT.
TC.ADC==400000 ;THIS FUNCTION MUST BE ADDRESS CHECKED
TC.USR==200000 ;THIS FUNCTION MUST BE AT USER LEVEL, ELSE POPJ
TC.USW==100000 ;THIS FUNCTION MUST BE AT USER LEVEL, ELSE WAIT
TC.ATW==040000 ;THIS FUNCTION MUST BE ATTACHED, ELSE WAIT
TC.ATR==020000 ;THIS FUNCTION MUST BE ATTACHED, ELSE POPJ
;DON'T ASSIGN BITS 13-17 WITHOUT CHANGING DISPATCH CODE
TTUUOT: XWD TC.ATW+TC.USW+TC.ADC,INCHRW ;(00) INPUT CHARACTER, WAIT TILL TYPED
XWD TC.ATW+TC.USW,ONEOUT ;(01) OUTPUT CHARACTER, WAIT IF NEEDED
XWD TC.ATR+TC.USR+TC.ADC,INCHRS ;(02) INPUT A CHARACTER AND SKIP
XWD TC.ATW+TC.USW,OUTSTR ;(03) OUTPUT AN ASCIZ STRING
XWD TC.ATW+TC.USW+TC.ADC,INCHWL ;(04) INPUT A CHARACTER AND WAIT FOR LINE
XWD TC.ATR+TC.USR+TC.ADC,INCHSL ;(05) INPUT A CHARACTER AND SKIP, LINE MODE
XWD TC.ADC,GETLIN ;(06) GET LINE CHARACTERISTICS
XWD TC.ATW+TC.ADC,SETLIN ;(07) SET LINE CHARACTERISTICS
XWD TC.ATR,TRESCU ;(10) BACK UP INPUT POINTER TO COMMAND
XWD TC.ATR,TSETBI ;(11) CLEAR INPUT BUFFER
XWD TC.ATR,TSETBO ;(12) CLEAR OUTPUT BUFFER
XWD TC.ATR+TC.USR,SKPINC ;(13) SKIP IF A CHARACTER TO BE INPUT
XWD TC.ATR+TC.USR,SKPINL ;(14) SKIP IF A LINE TO BE INPUT
XWD TC.ATW+TC.USW,IONEOU ;(15) IMAGE ONE-CHARACTER OUTPUT
XWD 0,CPOPJ## ;(16) NOT IMPLEMENTED
XWD 0,CPOPJ## ;(17) NOT IMPLEMENTED
SUBTTL TTCALL AND TRMOP. -- OUTCHR AND IMAGE OUTCHR
;SUBROUTINES FOR TTCALL
;ONEOUT OUTPUTS ONE CHARACTER FROM C(E)
ONEOUT: PUSHJ P,SAVE2## ;SAVE P2
SKIPN F ;ANY DDB?
SKIPA P2,[CCTYO] ;NO--MUST BE SLOPY
MOVEI P2,TYO7W ;YES--BE NEET
IFN FTRSP,< ;RESPONSE DATA?
PUSHJ P,RSPTOR## ;RECORD RESPONSE SATISFIED BY TTY OUTPUT
>
ONEOU1: PUSHJ P,CLRIMI ;CLEAR IMAGE INPUT STATE
PUSHJ P,GETWDU## ;PICK UP USER'S WORD
MOVE T3,T1 ;PUT IN RIGHT AC
ANDI T3,177 ;MASK OUT ANY JUNK
JUMPE T3,CPOPJ## ;IF NOT NULL,
PUSHJ P,(P2) ;TYPE OUT, WITH PARITY, WAIT IF NEEDED
PJRST PTSTRT ;START PTY IF THIS IS PTY LINE
;IONEOU OUTPUTS ONE CHARACTER FROM LOW 8 BITS OF C(E)
IONEOU: IFN FTRSP,< ;RESPONSE DATA?
PUSHJ P,RSPTOR## ;RECORD RESPONSE SATISFIED BY TTY OUTPUT
>
PUSHJ P,CLRIIQ ;NOT IN INPUT WAIT ANY MORE
JUMPE F,ONEOU1 ;IF NO DDB, SEND 7 BITS
PUSHJ P,GETWDU## ;GET USER'S DATUM
MOVE T3,T1 ;INTO RIGHT AC
TRO T3,400 ;FLAG AS IMAGE CHARACTER (NO FILLER)
PUSHJ P,TYO9W ;SEND IMAGE CHARACTER (WAIT IF NEEDED)
PJRST PTSTRT ;START PTY IF THIS IS PTY LINE
SUBTTL TTCALL AND TRMOP. -- OUTSTR AND RESCAN
;OUTSTR OUTPUTS A STRING OF ASCIZ CHARACTERS
OUTSTR: IFN FTRSP,< ;RESPONSE DATA?
PUSHJ P,RSPTOR## ;RECORD RESPONSE SATISFIED BY TTY OUTPUT
>
PUSHJ P,SAVE4## ;SAVE P1
MOVEI P3,TYO7W
OUTST3: PUSHJ P,CLRIMI ;CLEAR IMAGE INPUT STATE
IFN FTVM,<
LDB T1,[POINT 9,M,26] ;PAGE #
PUSHJ P,TPSHS## ;IS PAGE SHARED?
JRST OUTST6 ;YES -- JUST USE
HRROI T1,(M) ;LEFT JUSTIFIED ASCIZ STRING
PUSHJ P,CKSTR## ;MAKE SURE ITS IN CORE AND LEGAL
JRST UADERR## ;ADDRESS CHECK
OUTST6:
> ;END FTVM
HRRI M,-1(M) ;COMPENSATE FOR GETWD1
OUTST5: MOVEI P4,200 ;MAXIMUM # OF WORDS IN ONE SHOT
OUTST2: MOVE P1,[POINT 7,P2] ;PREPARE TO READ BYTES
PUSHJ P,GETWD1## ;GET A USER'S WORD
MOVE P2,T1 ;PUT WORD IN A SAFE AC
OUTST1: TLNN P1,760000 ;ANY BYTES LEFT?
JRST OUTST4 ;NO. GET ANOTHER WORD
ILDB T3,P1 ;YES. GET ONE
JUMPE T3,PTSTRT ;NULL MARKS END OF STRING, START PTY
PUSHJ P,(P3) ;TYPE OUT CHARACTER WITH PARITY
JRST OUTST1 ;AND GO BACK FOR MORE.
OUTST4: SOJG P4,OUTST2 ;GO BACK FOR MORE. IS MESSAGE LONG?
PUSHJ P,SCDCHK## ;CHECK FOR CLOCK TICK
JRST OUTST5
;TRESCU IS FOR COMPIL TO READ COMMAND WHICH STARTED IT
TRESCU: MOVE T2,LDBDCH(U) ;SAVE OLD BIT FOR TEST
MOVSI T1,LDLECS ;CLEAR BIT IN LINE DATA BLOCK WHICH
ANDCAM T1,LDBDCH(U) ; WOULD CAUSE COMMAND TO BE SKIPPED
TDNN T2,T1 ;SEE IF ANYTHING THERE
TRNN M,1 ;NO--SEE IF USER WANTS TO KNOW
POPJ P,0 ;NO--JUST RETURN
JRST CPOPJ1## ;YES--GIVE SKIP RETURN
SUBTTL TTCALL AND TRMOP. -- SKPINL AND SKPINC
;MORE SUBROUTINES FOR TTCALL UUO
;SKIP IF A LINE MAY BE INPUT
SKPINL: PUSHJ P,TYIEAT ;MAKE SURE NOT FAKED BY COMMAND
PUSHJ P,TTLCHK ;IS A LINE AVAILABLE?
SKIPA ;NO. DON'T SKIP.
AOS 0(P) ;YES. SKIP RETURN
PJRST NOCTRO ;IN ANY CASE, CLEAR ^O BIT
;SKIP IF A CHARACTER MAY BE INPUT
SKPINC: PUSHJ P,TYIEAT ;MAKE SURE NOT FAKED BY COMMAND
SKIPG LDBECC(U)
SKIPLE LDBTIC(U) ;ANY CHARACTERS IN LDB?
NCTRO1: AOS 0(P) ;SKIP RETURN, CLEARING ^O
NOCTRO: MOVSI T1,LDLOSU ;CLEAR OUTPUT SUPPRESS BIT
ANDCAM T1,LDBDCH(U) ; IN LINE DATA BLOCK
POPJ P,0 ;AND RETURN
SUBTTL TTCALL AND TRMOP. -- GETLIN
;GETLIN RETURNS A WORD OF INFORMATION ABOUT A LINE.
GETLIN: PUSHJ P,GETWDU##
JUMPL T1,GETLN1 ;DOES HE WANT HIS OWN LINE
; IF YES USE CURRENT C(U)
TRZ T1,.UXTRM ;CLEAR IO INDEX BIT
CAIL T1,TTPLEN## ;NO. DOES HE WANT A LEGAL ONE?
JRST GETLNZ ;NO. RETURN A ZERO
MOVE U,LINTAB##(T1) ;GET THE RIGHT LDB ADDRESS
GETLN1: JUMPE U,GETLNZ ;IN CASE RUNNING DETACHED
HRRZ F,LDBDDB(U) ;GET ATTACHED DDB
SETZM S ;ASSUME DETACHED
SKIPE F ;IS JOB DETACHED?
MOVE S,DEVIOS(F) ;GET STATUS BITS FOR TTY
HLL U,LDBDCH(U) ;GET DEVICE BITS FOR BELOW
LDB T1,LDPLNO ;GET THE LINE NUMBER FROM LDB
TRO T1,.UXTRM ;SET IO INDEX BIT
HRL T1,LDBDCH(U) ;GET RIGHT-HALF BITS.
TLZ T1,GTLMSK ;CLEAR BITS THAT ARE JUNK OR
; THAT WILL BE SET BELOW
LDB T3,GETLP1 ;GET BITS FROM LEFT OF LDBDCH
DPB T3,GETLP2 ;AND PUT AT RIGHT PLACE IN T1
TLC T1,GTLT37 ;THIS BIT IS WRONG SENSE
JUMPE F,GETLN5 ;DONE IF NO DDB
TLNE U,LDLCOM ;IS LINE AT COMMAND LEVEL?
JRST GETLN4 ;YES. SEE IF SHOULD BE CONSIDERED FOR INPUT
GETLN3: MOVE T3,T1 ;SAVE AWAY BITS SO FAR
PUSHJ P,TTLCK2 ;SEE IF ANY LINE READY
TDZA T1,T1 ;NO. CLEAR T1
MOVSI T1,GTLRDY ;YES. SET BIT
IOR T1,T3 ;PUT NEW BIT WITH OLD BIT
GETLN5: TLNE U,LDLXON ;XON TRUE?
TLO T1,GTLXON ;YES. FLAG THAT
GETLN2: PJRST PUTWDU## ;GIVE RESULT TO USER
;AND RETURN
GETLNZ: MOVEI T1,0 ;RETURN ZERO FOR BAD LINE
JRST GETLN2 ;GO RETURN THAT
GETLN4: HRRZ T3,LDBDDB(U) ;GET LINKED DDB, IF ANY
JUMPE T3,GETLN3 ;IF NONE, CHECK COUNTS
MOVE T3,DEVMOD(T3) ;GET DEVICE MODE BITS
TLNN T3,TTYATC ;IS TTY ATTACHED CONSOLE?
JRST GETLN3 ;NO. CHECK COUNTS
JRST GETLN5 ;YES. IGNORE COUNTS WHILE AT COMMAND LEVEL
GETLP1: POINT 4,LDBDCH(U),15 ;TO GET SOME BITS FROM LDB
GETLP2: POINT 4,T1,15 ;TO COPY THEM TO T1
SUBTTL TTCALL AND TRMOP. -- SETLIN, INCHSL, INCHWL, INCHRS & INCHRW
;ROUTINE TO SET LINE CHARACTERISTICS WHICH ARE LEGAL FOR USER TO DIDDLE
SETLIN: PUSHJ P,GETWDU##
HLRZS T1 ;SEE WHAT HE WANTS TO SET THEM TO
TRC T1,GTLT37 ;STORED AS COMPLEMENT
ROT T1,-2 ;THIS IS BIT-DEPENDENT, MATCHING POINTER
DPB T1,SETLP1 ;THESE THREE BITS CAN BE SET
MOVSI T3,LDLXON ;AND THIS ONE (NON-ADJACENT)
SKIPGE T1 ;HE WANT IT ON?
IORM T3,LDBDCH(U) ;YES.
SKIPL T1 ;OR OFF?
ANDCAM T3,LDBDCH(U) ;OFF.
POPJ P,0 ;RETURN FROM SETLIN
SETLP1: POINT 3,LDBDCH(U),15 ;PART OF LEGAL BITS
INCHRS: PUSHJ P,SKPINC ;CAN I GET A CHARACTER (CLEAR ^O)
POPJ P,0 ;NO. GIVE NON-SKIP RETURN
PUSHJ P,TWAITC ;WAIT IN CASE NOT ECHOED YET
ICS3: PUSHJ P,TYIS ;GET A CHARACTER
JRST NOCTRO ;NONE THERE.
AOS 0(P) ;GIVE SKIP RETURN
JRST ICW1 ;AND RETURN THE CHARACTER
INCHSL: PUSHJ P,SKPINL ;IS THERE A LINE AVAILABLE?
POPJ P,0 ;NO. NON-SKIP RETURN TO USER
PUSHJ P,TWAITL
JRST ICS3 ;YES. GO GET A CHARACTER FOR HIM
INCHWL: PUSHJ P,TWAITL ;WAIT FOR A LINE TO APPEAR
PUSHJ P,TYI ;GO GET A CHARACTER
MOVEI T3,0 ;IMPOSSIBLE. NO CHARACTERS. USER SET IODERR?
ICW1: ANDI T3,177 ;MASK TO SEVEN BITS
MOVE T1,T3
MOVE R,JBTADR##(J)
PUSHJ P,PUTWDU## ;GIVE HIM THE CHARACTER
JRST NOCTRO ;AND NON-SKIP RETURN
INCHRW: PUSHJ P,TWAITC ;WAIT FOR A CHARACTER TO APPEAR
PUSHJ P,TYI ;GO GET THE CHARACTER
MOVEI T3,0 ;IMPOSSIBLE. NONE THERE. USER SET IODERR?
JRST ICW1 ;GIVE HIM T3 AND RETURN
SUBTTL TTCALL AND TRMOP. -- TRMNO. UUO
IFN FT5UUO,< ;LEAVE OUT OF SMALL SYSTEMS
;TRMNO. CALLI, TO GET TERMINAL NUMBER
;FOR SPECIFIED JOB NUMBER.
; MOVE AC,JOBNUMBER
;CALL CALLI AC,115
; .ERROR RETURN
; NORMAL RETURN ;AC HAS .UXTRM+LINE#
TRMNO:: CAMN T1,[-1] ;IS ARG -1?
MOVEI T1,(J) ;YES, USE THIS JOB
JUMPLE T1,RTZER## ;ERROR IF JOB # 0 OR LESS THAN -1
CAMLE T1,HIGHJB## ; OR TOO BIG
JRST RTZER## ;..
HRRZ T1,TTYTAB##(T1) ;GET DDB ADDRESS
JUMPE T1,RTZER## ;ERROR IF NONE
HRRZ U,DDBLDB(T1) ;GET LDB ADDRESS
JUMPE U,RTZER## ;ERROR IF DETACHED
LDB T1,LDPLNO ;GET LINE NUMBER
ADDI T1,.UXTRM ;CONVERT TO UNIVERSAL
JRST STOTC1## ;SKIP RETURN INDEX TO USER
> ;END OF FT5UUO CONDITIONAL
SUBTTL TTCALL AND TRMOP. -- TRMOP. DISPATCH
IFN FT5UUO,< ;NOT IN SMALL SYSTEMS
;TRMOP. UUO, OR CALLI 116.
;UUO TO PERFORM MISCELLANEOUS FUNCTIONS FOR
;A SPECIFIED TERMINAL.
;
;CALL: MOVE AC,[XWD N,ADR]
; CALLI AC,116
; ERROR RETURN
; NORMAL RETURN
;
TRMOP:: PUSHJ P,SAVE4## ;SAVE THE PRESERVED AC'S
MOVE P4,T1 ;USER'S ARGUMENT TO P4
HRRM T1,M ;ADDRESS OF ARGUMENT LIST
HLRZ T2,T1 ;CHECK FOR LENGTH AT LEAST 2
CAIL T2,2
PUSHJ P,GETWRD## ;GET USER'S ARG AT M
JRST TOPX3 ;ERROR CODE 3, ILLEGAL ADDRESS
HRRZ P1,T1 ;COPY USER ARGUMENT
JUMPLE P1,RTZER## ;ZERO ERROR IF BAD ARGUMENT CODE
HRRI M,1(M) ;POINT TO TERMINAL INDEX
PUSHJ P,GETWRD## ;GET IT, IF POSSIBLE
JRST TOPX3 ;NOT A LEGAL ADDRESS
SUBI T1,.UXTRM ;REMOVE TERMINAL OFFSET
JUMPL T1,RTZER## ;RANGE CHECK THE TERMINAL #
CAIL T1,TTPLEN## ;..
JRST RTZER## ;BAD LINE NUMBER
HRRZ U,LINTAB##(T1) ;OK. GET THE LDB ADDRESS
HRRZ F,LDBDDB(U) ;AND DDB, IF ANY.
HRRZ T1,P1 ;GET USER'S FUNCTION CODE
TRNE T1,3000 ;READ/SET CODE?
JRST TOPRSQ ;PROBABLY. GO SEE.
CAILE T1,TOPLN0 ;IS IT AN ACTION CODE?
JRST RTZER## ;NO. NO SUCH CODE
HRRI M,1(M) ;ADVANCE M
MOVE P3,TOPTB0-1(T1) ;PICK UP DISPATCH WORD
IFN FTMIC,<
MOVSI P2,(JB.LSY) ;PROGRAM FROM SYS BIT
TLNE P3,(TOP.MC) ;MIC TRMOP?
TDNN P2,JBTLIM##(J) ;AND DID THIS PROGRAM COME FROM SYS?
JRST CHKRED ;NO TO EITHER
MOVSI P2,'MIC' ;RUNNING MIC?
CAMN P2,JBTNAM##(J) ;SKIP IF NO
JRST CHKDDB ;RUNNING MIC, NO FUTHER CHECKING REQUIRED
CHKRED: MOVSI T1,JP.POK ;POKE ALLOWS ALL
TLNE P3,(TOP.MR) ;MUST BE MIC?
PUSHJ P,PRVBIT ;CHECK PRIVS
SKIPA
JRST TOPX1 ;GIVE ERROR
>
TLNN P3,(TOP.RP) ;DO WE NEED READ PRIVS?
JRST CHKWRT ;NO--SEE IF WE NEED WRITE PRIVS
PUSHJ P,TREDOK ;YES--DO WE HAVE READ PRIVS?
JRST TOPX1 ;NO--GIVE ERROR RETURN
CHKWRT: TLNN P3,(TOP.WP) ;DO WE NEED WRITE PRIVS?
JRST CHKDDB ;NO--DISPATCH
PUSHJ P,TWRTOK ;YES--DO WE HAVE READ PRIVS?
JRST TOPX1 ;NO--GIVE ERROR RETURN
CHKDDB: TLNN P3,(TOP.NF) ;NEED F?
JRST (P3) ;NO--ALLSET
PUSHJ P,TOPDDB ;YES--GET DDB
JRST TOPX6 ;CAN'T GIVE ERROR
JRST (P3) ;YES--DO THE TRMOP.
;STILL IN FT5UUO CONDITIONAL
;HERE IF REQUESTED FUNCTION NOT FROM 1 THRU TOPLN0-1
;F AND U ARE SET UP TO THE DESIRED LINE.
TOPRSQ: ANDI P1,777 ;JUST THE ITEM NUMBER
TRZE T1,1000 ;READ CODE?
JRST TOPRED ;PROBABLY
CAIL T1,2000+TOPLN1 ;NO. SET CODE?
JRST RTZER## ;NOT A LEGAL CODE
TOPSET: HLRZ T2,P4 ;IS THERE ANOTHER DATUM?
CAIGE T2,3 ;..
JRST TOPX3 ;NO. CAN'T DO THE SET.
HRRI M,1(M) ;YES. GO GET IT
PUSHJ P,GETWRD## ;..
JRST TOPX3 ;NOT A LEGAL ADDRESS
MOVE P2,T1 ;SAVE ARGUMENT
PUSHJ P,TWRTOK ;DOES HE HAVE WRITE PRIVS?
JRST TOPX1 ;NO. ERROR CODE 1.
TOPST1: LDB T1,TOPSYR ;LEGAL TO TRY SETTING.
JUMPE T1,TOPST2 ;RANGE CHECK REQUIRED?
HLRZ T2,TOPSRT-1(T1) ;YES. GET MINIMUM VALUE
CAMGE P2,T2 ;SUPPLIED .GE. MINIMUM?
JRST TOPX2 ;NO. BAD ARG, TOO SMALL
HRRZ T2,TOPSRT-1(T1) ;OK. CHECK MAXIMUM
CAMLE P2,T2 ;..
JRST TOPX2 ;BAD. ARG TOO BIG.
TOPST2: MOVE T2,TOPTB1(P1) ;SET ALLOWED?
TLNN T2,(TOP.NI) ;ILLEGAL ON NET?
JRST TOPST3 ;NO, SO GO ON
MOVE T1,LDBDCH(U) ;YES, IS TTY ON
TRNE T1,LDRREM ; THE NET?
JRST TOPX2 ;YES, ERROR
TOPST3: TLNE T2,(TOP.SA) ;OK TO SET?
JRST TOPST4 ;YES--DO SO
TLNN T2,(TOP.PS) ;NEED PRIVS?
JRST TOPX1 ;NO--CAN NOT SET
MOVSI T1,JP.POK ;POKE BIT
PUSHJ P,PRVBIT ;IS IT SET?
JRST TOPST4 ;YES--DO SET
JRST TOPX1 ;NO. NOT ALLOWED.
TOPST4: MOVEI T1,LDRPTY
CAIN P1,4 ;SET SLAVE?
TDNN T1,LDBDCH(U) ; ON PTY?
DPB P2,0(T2) ;OK. CHANGE ITEM.
IFN FTD10H,<
CAIN P1,27 ;ARE WE SETTING APL?
DPB P2,[POINT 1,LDBBCD(U),11] ;YES, SET IT WHERE DLSINT
; LOOKS FOR IT
> ;END OF D10H
IFN FTCAFE,<
TOPTFE: MOVSI T1,(TOP.PE) ;DO WE NEED TO CHANGE
TDNN T1,TOPTB1(P1) ; HARDWARE PARAMS FOR THIS LINE
JRST CPOPJ1## ;NO--JUST RETURN
MOVEI T1,ISRCHP ;CHANGE HARDWARE PARAMS
PUSHJ P,@LDBISR(U) ;CALL THE ISR
> ;END FTCAFE
JRST CPOPJ1## ;SKIP RETURN
;STILL IN FT5UUO CONDITIONAL
TOPRED: CAIL T1,TOPLN1 ;LEGAL ITEM NUMBER?
JRST RTZER## ;NO. ERROR RETURN
PUSHJ P,TREDOK ;OK TO DO A READ?
JRST TOPX1 ;NO. PROTECTION FAILURE.
MOVE T1,TOPTB1(P1) ;OK. GET TABLE ENTRY.
LDB T1,0(T1) ;GET BYTE POINTED TO
PJRST STOTC1## ;AND RETURN IT TO USER
;STILL IN FT5UUO CONDITIONAL
;SUBROUTINE TO CHECK FOR READ PRIVS
;CALL WITH:
; F = DDB OF TARGET OR 0
; PUSHJ P,TREDOK
; RETURN HERE IF ERROR
; RETURN HERE IF OK TO READ
TREDOK: PUSHJ P,SAVE3## ;SAVE P1,P2, AND P3
MOVSI P1,PVSPYM ;LOAD UP THE SPY BIT
JRST MYTTY ;JUMP TO COMMON CODE
;SUBROUTINE TO CHECK FOR WRITE PRIVS
;CALL WITH:
; F = DDB OF TARGET OR 0
; PUSHJ P,TWRTOK
; RETURN HERE IF ERROR
; RETURN HERE IF OK
;PRESERVES ALL AC'S
TWRTOK: PUSHJ P,SAVE3## ;SAVE P1,P2, AND P3
MOVSI P1,JP.POK ;FALL INTO COMMON CODE
MYTTY: SKIPE P2,F ;IS THERE A DDB?
LDB P2,PJOBN## ;YES--GET THE OWNERS JOB NUMBER
CAMN P2,J ;DO I OWN THIS TTY
JRST MYTTY1 ;CHECK PRIVS FOR MIC STYLE TRMOP.
MYTTY2: EXCH P1,T1 ;SAVE T1 AND SET UP PRIV BIT
PUSHJ P,PRVBIT## ;CHECK THE BIT
AOS (P) ;OK TO READ OR SET
MOVE T1,P1 ;RESTORE T1
POPJ P,0 ;RETURN
MYTTY1:
IFE FTMIC,<
JRST CPOPJ1## ;OK TO DO YOUR THING
>
IFN FTMIC,<
TLNN P3,(TOP.MC) ;MIC TRMOP?
JRST CPOPJ1## ;NO--OK TO DO YOUR THING
MOVE P2,DEVMOD(F) ;IS TARGET TTY...
TLNE P2,TTYATC ;CONTROLLING HIS JOB?
JRST CPOPJ1## ;YES--OK TO DO MIC TRMOP.
MOVE P2,LDBDCH(U) ;NO--CHECK IF TARGET TTY..
TRNE P2,LDRCTY ; IS A CTY
JRST MYTTY2 ;YES--CHECK PRIVS
HRRZ P3,TTYTAB##(J) ;GET USER'S TTY DDB ADDRESS
JUMPE P3,RTZER## ;ERROR IF NONE
HRRZ P3,DDBLDB(P3) ;LDB ADDRESS
JUMPE P3,MYTTY2 ;DETACHED, MUST CHECK PRIVS
MOVE P3,LDBDCH(P3) ;USER'S TTY CHARACTERISTICS BITS
TRNN P3,LDRRMT ;IS HE A LOCAL TTY?
JRST CPOPJ1## ;YES--LET HIM DO MIC TRMOP TO EITHER REMOTE OR LOCAL TTY'S
TRNE P2,LDRRMT ;NO--TARGET TTY ANOTHER REMOTE TTY
JRST CPOPJ1## ;YES--DO IT
JRST MYTTY2 ;NO--CHECK PRIVS
>
;STILL UNDER FT5UUO CONDITIONAL
;ERROR RETURNS
ERCODE TOPX1,TRMNP% ;(1) ERROR CODE FOR PROT CHECK
ERCODE TOPX2,TRMBR% ;(2) ERROR CODE FOR RANGE BAD
ERCODE TOPX3,TRMIA% ;(3) ERROR CODE FOR ADDRESS BAD.
ERCODE TOPX4,TRMCD% ;(4) ERROR CODE FOR NOT POSSIBLE TO DO
ERCODE TOPX5,TRMDO% ;(5) ERROR IN DIALLER OPERATION
ERCODE TOPX6,TRMND% ;(6) CAN NOT GET DDB
;STILL IN FT5UUO CONDITIONAL
;CONTENTS OF TOPTB1 ARE AS FOLLOWS
;BITS 0-5 ARE RANGE TABLE INDEX FOR RANGE CHECK ON SET.
;BITS 6-12 ARE FLAGS FOR DETERMINING LEGALITY OF TRMOP UUO
;RH IS ADDRESS OF BYTE POINTER.
TOP.SA==1B6 ;SET ALLOWED
TOP.PS==1B7 ;SET ALLOWED FOR PRIVILEGED JOB ONLY
TOP.PE==1B8 ;POKE THE FRONT END IF SET
TOP.NI==1B9 ;ILLEGAL IF TTY ON A NETWORK NODE
;NOTE: THESE DEFINITIONS MUST AGREE WITH LDB DEFINITIONS
TOPTB1: EXP <0>B5+<0>+<[POINT 1,LDBDCH(U),^L<(LDLOIP)>]> ;1000
EXP <0>B5+<0>+<[POINT 1,LDBDCH(U),^L<(LDLCOM)>]> ;1001
EXP <0>B5+<TOP.SA+TOP.PE>+<[POINT 1,LDBDCH(U),^L<(LDLXON)>]> ;1002
EXP <0>B5+<TOP.SA+TOP.PE>+<[POINT 1,LDBDCH(U),^L<(LDLLCT)>]> ;1003
EXP <0>B5+<TOP.SA>+<[POINT 1,LDBDCH(U),^L<(LDLSLV)>]> ;1004
EXP <0>B5+<TOP.SA>+<[POINT 1,LDBDCH(U),^L<(LDLTAB)>]> ;1005
EXP <0>B5+<TOP.SA>+<[POINT 1,LDBDCH(U),^L<(LDLFRM)>]> ;1006
EXP <0>B5+<TOP.SA>+<[POINT 1,LDBDCH(U),^L<(LDLLCP)>]> ;1007
EXP <0>B5+<TOP.SA>+<[POINT 1,LDBDCH(U),^L<(LDLNFC)>]> ;1010
EXP <0>B5+<TOP.PE>+<PHPOS> ;1011
EXP <1>B5+<TOP.SA+TOP.PE>+<LDPWID> ;1012
EXP <0>B5+<TOP.SA>+<[POINT 1,LDBBY2(U),^L<(L2LSND)>]> ;1013
EXP <0>B5+<TOP.PS>+<[POINT 1,LDBDCH(U),^L<LDRHLF>]> ;1014
EXP <0>B5+<TOP.PS>+<[POINT 1,LDBDCH(U),^L<LDRRMT>]> ;1015
EXP <0>B5+<TOP.PS>+<[POINT 1,LDBDCH(U),^L<LDRDIS>]> ;1016
EXP <2>B5+<TOP.SA+TOP.PE>+<LDPFLC> ;1017
EXP <0>B5+<TOP.SA+TOP.PE>+<[POINT 1,LDBBY2(U),^L<(L2LTAP)>]> ;1020
EXP <0>B5+<TOP.SA+TOP.PE>+<[POINT 1,LDBPAG(U),^L<(LPLPAG)>]> ;1021
EXP <0>B5+<TOP.SA+TOP.PE>+<[POINT 1,LDBPAG(U),^L<(LPLSTP)>]> ;1022
EXP <3>B5+<TOP.SA>+<LDPPSZ> ;1023
EXP <3>B5+<LDPPCT> ;1024
EXP <0>B5+<TOP.SA>+<[POINT 1,LDBPAG(U),^L<(LPLBLK)>]> ;1025
EXP <0>B5+<TOP.SA>+<[POINT 1,LDBPAG(U),^L<(LPLALT)>]> ;1026
EXP <0>B5+<TOP.SA+TOP.PE>+<LDPAPL> ;1027
EXP <4>B5+<TOP.SA+TOP.PE>+<LDPRSP> ;1030
EXP <4>B5+<TOP.SA+TOP.PE>+<LDPTSP> ;1031
EXP <0>B5+<TOP.SA+TOP.PE>+<LDPDBK> ;1032
EXP <0>B5+<TOP.PS>+<LDP274> ;1033
EXP <0>B5+<TOP.SA+TOP.PE>+<LDPTDY> ;1034
EXP <5>B5+<TOP.SA+TOP.PE>+<LDPACR> ;1035
EXP TOP.SA+LDPRTC ;1036
EXP <0>B5+<TOP.SA>+<[POINT 36,LDBPBK(U),35]> ;1037
TOPLN1==.-TOPTB1
IFN FTPATT,<
EXP 0 ;FOR PATCHING
EXP 0 ;FOR PATCHING
>
;STILL IN FT5UUO CONDITIONAL
TOPSYR: POINT 6,TOPTB1(P1),5 ;POINTER TO RANGE TABLE INDEX
;THIS IS THE RANGE TABLE
TOPSRT: XWD ^D16,^D200 ;(1)MIN AND MAX WIDTHS
XWD 0,3 ;(2)MIN AND MAX FILLER CLASSES
XWD 0,^D63 ;(3)MIN AND MAX PAGE LENGTH
XWD 0,17 ;(4)MIN AND MAX SPEED
XWD 0,^D200 ;(5)AUTO C.R. TABLE
IFN FTPATT,<
0 ;FOR PATCHING. NEW ONES ABOVE THIS WORD
>
;STILL IN FT5UUO CONDITIONAL
TOP.RP==1B1 ;NEED READ PRIVS TO DO THIS FUNCTION
TOP.WP==1B2 ;NEED WRITE PRIVS TO DO THIS FUNCTION
TOP.NF==1B3 ;NEED F SETUP TO DO THIS FUNCTION
IFN FTMIC,<
TOP.MC==1B4 ;THIS FUNCTION IS LEGAL IF RUNNING MIC
TOP.MR==1B5
>
TOPTB0: EXP TOP.RP+TOPSIP ;1 - SKIP IF INPUT PRESENT
EXP TOP.RP+TOPSOP ;2 - SKIP IF OUTPUT PRESENT
EXP TOP.WP+TOPCIB ;3 - CLEAR INPUT BUFFER
EXP TOP.WP+TOPCOB ;4 - CLEAR OUTPUT BUFFER
EXP TOP.RP+TOP.WP+TOPOUC ;5 - OUTPUT CHAR
EXP TOP.RP+TOP.WP+TOP.NF+TOPOIC ;6 - OUTPUT IMAGE CHAR
EXP TOP.RP+TOP.WP+TOPOUS ;7 - OUTPUT STRING
EXP TOP.RP+TOP.WP+TOPINC ;10 - INPUT CHAR
EXP TOP.RP+TOP.WP+TOPIIC ;11 - INPUT IMAGE CHAR
EXP TOP.WP+TOPDSE ;12 - DATASET ENABLE
EXP TOP.WP+TOPDSC ;13 - DATASET CALL
EXP TOP.WP+TOPDSF ;14 - DATASET OFF
EXP TOP.RP+TOP.WP+TOPRES ;15 - RESCAN
IFN FTCAFE,<
IFN FT2741,<
EXP TOP.WP+TOPELE ;16 - SET TYPE ELEMENT
>
IFE FT2741,<
EXP RTZER##
>
EXP TOP.WP+TOPABR ;17 - ENABLE AUTO BAUD DETECT
> ;END FTCAFE
IFE FTCAFE,<
EXP RTZER## ;16 - NOT IMPLEMENTED
EXP RTZER## ;17 - NOT IMPLEMENTED
> ;END FTCAFE
EXP TOP.RP+TOP.WP+TOPISC ;20 - INPUT CHAR.
IFN FTMIC,<
EXP TOP.RP+TOP.WP+TOP.MC+TOPMTY ;21 - MICTYP
EXP TOP.RP+TOP.WP+TOP.MC+TOPMGT ;22 - MICGET
EXP TOP.RP+TOP.WP+TOP.MC+TOPMST+TOP.MR ;23 - MICSET
EXP TOP.RP+TOP.WP+TOP.MC+TOPMCL ;24 - MICCLR
EXP TOP.RP+TOP.WP+TOP.MC+TOPMDP ;25 - MICDPY
EXP TOP.RP+TOP.WP+TOP.MC+TOPMRS ;26 - MICDSP
IFN FTMLOG,<
EXP TOP.MC+TOP.RP+TOP.WP+TOPMLG ;27 - MICLOG
>
IFE FTMLOG,<
EXP RTZER## ;27 - NOT IMPLEMENTED
>
>
IFE FTMIC,<
EXP RTZER## ;21 - NOT IMPLEMENTED
EXP RTZER## ;22 - NOT IMPLEMEMTED
EXP RTZER## ;23 - NOT IMPLEMENTED
EXP RTZER## ;24 - NOT IMPLEMENTED
EXP RTZER## ;25 - NOT IMPLEMENTED
EXP RTZER## ;26 - NOT IMPLEMEMTED
EXP RTZER## ;27 - NOT IMPLEMENTED
>
EXP TOPDSS ;30 - RETURN DATA SET STATUS
TOPLN0==.-TOPTB0
IFN FTPATT,<
0 ;FOR PATCHING
>
SUBTTL TTCALL AND TRMOP. -- SKIPS AND CLEARS
TOPSIP==SKPINC
TOPSOP: SKIPG LDBTOC(U) ;OUTPUT READY?
SKIPGE LDBDCH(U) ;OR OUTPUT IN PROGRESS?
AOS 0(P) ;YES. SKIP RETURN
POPJ P,0 ;RETURN
TOPCIB: AOS 0(P) ;SUCCESS RETURN
PJRST TSETBI ;CLEAR INPUT BUFFER
TOPCOB: AOS 0(P) ;SUCCESS RETURN
PJRST TSETBO ;CLEAR OUTPUT BUFFER
;FOLLOWING NOT DONE YET
TOPIIC==RTZER##
IFE FTMODM,<
TOPDSE==CPOPJ##
TOPDSF==CPOPJ##
TOPDSC==CPOPJ##
TOPDSS==CPOPJ##
>
;STILL IN FT5UUO CONDITIONAL
SUBTTL TTCALL AND TRMOP. -- TRMOP. I/O
;OUTPUT 1 CHAR
TOPOUC: AOS (P)
PUSHJ P,TOPDDB ;GET A DDB
SETZM F ;NO--DON'T NEED IT BADLY
JRST ONEOUT ;TYPE
;OUTPUT A STRING
IFN FTMIC,<
TOPMDP: MOVSI T1,LDLOSU ;CLEAR CONTROL O BIT
ANDCAM T1,LDBDCH(U) ;SO DATA WILL BE SEEN
TDZA F,F ;SO CCTYO WILL BE USED (AVOID TIOW)
>
TOPOUS:
IFN FTMIC,<
SETOM F ;SEARCH FOR A DDB
>
AOS (P)
PUSHJ P,GETWDU ;GET POINTER
HRRZ M,T1 ;PUT IN RIGHT AC
IFN FTMIC,<
SKIPE F ;DON'T SEARCH FOR A DDB IF THIS IS MIC DISPLAY
>
PUSHJ P,TOPDDB ;GET A DDB
TDZA F,F ;NONE
PJRST OUTSTR ;HAVE ONE DO OUTSTR
PUSHJ P,SAVE3## ;SAVE P1 AND P2
MOVEI P3,CCTYO ;ROUTINE TO USE
PJRST OUTST3 ;DO PART OF OUTSTR
;OUTPUT IMAGE CHAR
TOPOIC::AOS (P) ;SKIP RETURN
JRST IONEOU ;TYPE IT
;INPUT A CHAR
TOPISC: SKIPA P1,[EXP INCHRW]
TOPINC: MOVEI P1,INCHWL
AOS (P)
LDB T1,PUUOAC## ;WHERE TO PUT ANSWER
HRR M,T1
PUSHJ P,TOPDDB
TDZA F,F
PJRST (P1) ;GET A BYTE
PUSHJ P,TYI ;GET CHAR
MOVEI T3,0 ;NONE THERE--RETURN NULL
MOVE T1,T3 ;COPY CHAR
JRST STOTAC## ;STORE FOR USER
;INPUT IMAGE CHAR
TOPIIC==RTZER##
;DO A RESCAN
TOPRES: PUSHJ P,TRESCU ;DO IT
JRST CPOPJ1## ;WIN
JRST CPOPJ1## ;WIN
;STILL IN FT5UUO
SUBTTL TTCALL AND TRMOP. -- TRMOP. I/O SUBROUTINES
;GET A DDB FOR TRMOP. I/O
TOPDDB: HRRZ F,LDBDDB(U) ;GET DDB POINTER
JUMPE F,TOPDD1 ;ANY DDB THERE?
LDB T1,PJOBN## ;YES--IS IT MINE?
CAMN T1,.C0JOB## ; ..
AOS (P) ;YES--USE IT
POPJ P, ;NO--ERROR
TOPDD1: PUSHJ P,TTYNAM ;GET SIXBIT NAME
MOVE T1,T2 ;PUT IN T1
PUSHJ P,GETDDB ;GET A DDB
POPJ P, ;NONE LEFT
MOVEI T1,ASSPRG ;INIT THE DDB SO
IORM T1,DEVMOD(F) ; IT WILL STICK
MOVE T1,.C0JOB ; AROUND AND WE
DPB T1,PJOBN## ; CAN WAKE OWNER
AOS (P) ;SKIP RETURN (CALL?)
PUSHJ P,@0(P) ;CALL OUR CALLER
JRST .+2 ;NON-SKIP
AOS -1(P) ;SKIP
PUSHJ P,TTYREL ;KILL OFF DDB
JRST TPOPJ## ;AND RETURN
;STILL IN FT5UUO
SUBTTL TTCALL AND TRMOP. -- TRMOP. DATASET FUNCTIONS
IFN FTMODM,<
;MORE SUBROUTINES FOR TRMOP
TOPDSE: MOVE T1,LDBDCH(U) ;GET DEVICE CHARACTERISTICS
IFN FTNET,<
TRNE T1,LDRREM ;REMOTE LINE
JRST NETDSE ;YES
>
TRNN T1,LDRDSD ;IS IT A DATASET?
JRST TOPX4 ;NO. ERROR CODE 4
LDB U,LDPDSC ;GET THE TABLE OFFSET INTO U
MOVSI T1,DSCIC2 ;CLEAR FAILURE, DIALLER FLAGS AND TIMER
ANDCAM T1,DSCTAB##(U) ; ..
MOVSI T1,DSCSWC ;SET TO ALLOW HIM ON
PUSHJ P,DSRRN1 ;SEND TO MODEM HANDLER
JRST CPOPJ1## ;AND SKIP RETURN
TOPDSF: MOVE T1,LDBDCH(U) ;GET DEV CHARACTERISTICS
IFN FTNET,<
TRNE T1,LDRREM ;REMOTE LINE
JRST NETDSF ;YES
>
TRNN T1,LDRDSD ;IS IT A MODEM
JRST TOPX4 ;NO. CANT DO THIS.
PUSHJ P,LDBCLR ;CLEAR OUT LDB
HRRZ F,LDBDDB(U) ;DDB?
JUMPE F,TOPDF1 ;NOT CONTROLING JOB
MOVE T1,DEVMOD(F)
TLNN T1,TTYATC ;CONTROLING TTY?
JRST TOPDF1 ;NOPE
MOVEI T1,TTFCXD ;DETACH IT
PUSHJ P,TTFORC
TOPDF1: LDB U,LDPDSC ;GET TABLE INDEX
MOVSI T1,DSCHWC ;CLEAR
ANDCAM T1,DSCTAB##(U)
PUSHJ P,DSROF1 ;HANG IT UP
JRST CPOPJ1## ;AND SKIP RETURN
TOPDSS: MOVE T1,LDBDCH(U) ;CHARACTERISTICS
IFN FTNET,<
TRNE T1,LDRREM ;REMOTE?
JRST NETDSS ;YES, LET NETSER DO IT
>
TRNN T1,LDRDSD ;DATA SET?
JRST TOPX4 ;NO, LOSE
LDB U,LDPDSC ;DSCTAB OFFSET
SKIPL DSCTAB##(U) ;HARDWARE CARRIER?
TDZA T1,T1 ;NO
MOVSI T1,DSCHWC ;YES
JRST STOTC1## ;STORE ANSWER FOR USER
IFE FTDIAL,<
TOPDSC==CPOPJ##
>
IFN FTNET,<
;CODE TO CONTROL REMOTE DATA SET LINES
NETDSS: MOVEI T3,DSTSTS ;STATUS
JRST NETISR ;CALL NETSER
NETDSE: MOVEI T3,DSTON ;SET DATA SET ON
JRST NETISR ;CALL NETSER
NETDSF: MOVEI T3,DSTOFF ;SET DATA SET OFF
JRST NETISR ;CALL NETSER
NETDSC: MOVEI T3,DSTCRQ ;DIALER REQUEST
NETISR: MOVEI T1,ISRDSC ;DATA SET CONTROL FUNCTION
PJRST D85DSC## ;CALL NETSER DIRECTLY SICE NO DTA SET TIMING
>
IFN FTDIAL,<
IFE FTSLEEP,< PRINTX DIALLER CODE REQUIRES SLEEP## FEATURE>
TOPDSC: MOVE T1,LDBDCH(U) ;DEVICE CHARACTERISTICS
IFN FTNET,<
TRNE T1,LDRREM ;REMOTE LINE
JRST NETDSC ;YES
>
TRNN T1,LDRDSD ;DATASET?
JRST TOPX4 ;NO. CAN'T DIAL THEN.
LDB U,LDPDSC ;GET DSCTAB INDEX
MOVE T1,DSCTAB##(U) ;AND BITS
TLNE T1,DSCHWC!DSCSWC ;ALREADY IN USE?
JRST TOPX5 ;YES. CAN'T DIAL ON IT.
TOPDC1: HRRZ T1,DSCTAB##(U) ;GET TTY NUMBER FOR MODEM
CAME T1,DSDUNI## ;BUSY FOR SAME UNIT, OR
SKIPN TTYDDA## ;DIALLER FREE?
JRST TOPDC2 ;YES
MOVEI T1,5 ;NO. WAIT FOR IT.
PUSHJ P,SLEEP## ; ..
JRST TOPDC1 ;TRY AGAIN
TOPDC2: MOVEM T1,DSDUNI## ;SAVE LINE BEING DIALLED
PUSHJ P,GETWRD## ;FROM USER CORE
JRST TOPX3 ;ADDRESS CHECK
MOVEM T1,DSCNUM ;STORE FOR DIALLER CODE
HRRI M,1(M) ;AND SECOND WORD
PUSHJ P,GETWRD## ; ..
JRST TOPX3 ;ADDRESS CHECK
TRO T1,17 ;GUARANTEE AN END OF NUMBER CODE
MOVEM T1,DSCNUM+1 ;STORE SECOND WORD
MOVSI T1,DSCIC2 ;CLEAR OUT THESE BITS
ANDCAM T1,DSCTAB##(U) ;IN CONTROL TABLE
MOVSI T1,DSCSWC!DSCDLW!^D30
IORM T1,DSCTAB##(U) ;AND SET UP TO WAIT FOR DIALLER
MOVE T1,[POINT 4,DSCNUM]
MOVEM T1,TTYDDA## ;STORE INITIAL POINTER TO NUMBER
MOVEI T3,DSTCRQ ;CALL REQUEST CODE
PUSHJ P,DSCCAL ;TO THE DEVICE HANDLER
TOPDC3: MOVEI T1,^D15 ;SLEEP FOR FIFTEEN SECONDS
PUSHJ P,SLEEP## ; ..
MOVE T1,DSCTAB##(U) ;SEE WHAT HAPPENED.
TLNE T1,DSCDLF ;FAIL?
JRST TOPX5 ;YES.
TLNE T1,DSCDLC ;COMPLETED OK?
JRST CPOPJ1## ;YES. SKIP RETURN TO USER
JRST TOPDC3 ;NEITHER YET. LOOP.
> ;END OF FTDIAL
> ;END OF FTMODM
;STILL IN FT5UUO
IFN FTCAFE,< ;IF WE SUPPORT THE DC76 COMPREHENSIVE ASYNCHRONOUS FRONT END
TOPABR: MOVEI T3,<LPCABR>B27 ;SET UP FUNCTION
MOVEI T1,ISRLPC ;FUNCTION CODE
SKIPGE LDBISR(U) ;SKIP IF NOT DC76
PUSHJ P,@LDBISR(U) ;CALL SERVICE ROUTINE
JRST CPOPJ1## ;GIVE GOOD RETURN
> ;END FTCAFE CONDITIONAL
IF2,<
IFNDEF TOPABR,<TOPABR==RTZER##>
IFNDEF TOPELE,<TOPELE==RTZER##>
> ;END IF2 CONDITIONAL
;STILL IN FT5UUO
;HERE TO SET TYPE ELEMENT IN 2741
IFN FTCAFE&FT2741,<
;ASSUME THAT THE ELEMENT CAN BE SET.
TOPELE: PUSHJ P,GETWRD ;GET SETTING.
JRST TOPX3 ;ADDRESS CHECK
MOVE T3,T1
MOVEI T1,ISRELE ;FUNCTION
PUSHJ P,@LDBISR(U) ;CALL ISR
JRST TOPX2 ;BAD NUMBER
JRST CPOPJ1## ;WIN
> ;END FTCAFE&FT2741
> ;END OF FT5UUO CONDITIONAL
IFN FTMIC,<
SUBTTL BYTE POINTERS INTO THE USER'S LDBMIC WORD
;BYTE POINTERS INTO THE USER'S LDBMIC WORD
LDP.OP: POINT 7,LDBMIC(U),21 ;OPERATOR CHARACTER
LDP.ER: POINT 7,LDBMIC(U),28 ;ERROR CHARACTER
LDPMJN: POINT 7,LDBMIC(U),35 ;MIC MASTER JOB NUMBER
;STILL IN IFN FTMIC
SUBTTL TYPE--- TYPE A STRING ON BEHALF OF A USER
; TOPMTY TYPE A STRING ON BEHALF OF USER
;ADDR: LINE NO.
; [ASCIZ/STRING/]
TOPMTY: PUSHJ P,SAVE1## ;SAVE AN AC
LDB P1,LDPLNO ;LINE NUMBER
PUSHJ P,GETWRD## ;GET ADDRESS OF STRING
JRST TOPX3 ;ADDRESS CHECK
HRRI M,-1(T1) ;AND PUT IT IN M FOR FUTURE GETWD1'S
IFN FTVM,<
HRROS T1 ;LEFT JUSTIFIED ASCIZ STRING
PUSHJ P,CKSTR## ;MAKE SURE ITS IN CORE AND LEGAL
JRST TOPX3 ;ADDRESS CHECK
>
TOPMT1: MOVE P3,[POINT 7,P2] ;SET UP BYTE POINTER
PUSHJ P,GETWD1## ;GET NEXT WORD OF ASCIZ STRING
MOVE P2,T1 ;AND SAVE IT
TOPMT2: TLNN P3,760000 ;END OF CURRENT WORD?
JRST TOPMT1 ;YES - GET NEXT ONE
ILDB T3,P3 ;GET NEXT CHAR
JUMPE T3,CPOPJ1## ;EXIT ON END OF STRING
PUSHJ P,PEVEN8 ;ADD PARITY
MOVE U,P1 ;SET LINE NO.
MOVEM U,MICLIN ;SET LOCK TO IGNORE CHARS AT INTERRUPT LEVEL
PUSHJ P,RECINU ;GO AND TYPE IT
SETOM MICLIN ;UNSET LOCK
JRST TOPMT2 ;AND GO GET NEXT CHAR
;STILL IN IFN FTMIC
SUBTTL CLEAR/SET--- CLEAR DOWN LDBMIC/SET UP LDBMIC
; MICCLR - CLEAR DOWN LDBMIC
;ADDR: LINE NO.
; MICSET - SET UP LDBMIC
;ADDR: LINE NO.
; STATUS
;
; BOTH GIVE OLD CONTENTS OF LDBMIC IN ADDR+1
TOPMCL: MOVEI T1,0 ;CLEAR T1
JRST TOPMS1 ;CLEAR LDBMIC
TOPMST: PUSHJ P,GETWRD## ;GET THE ARGUMENT
JRST TOPX3 ;ADDRESS CHECK
PUSH P,T1
ANDI T1,177
CAMLE T1,HIGHJB## ;ISOLATE JOB NUMBER
JRST [POP P,T1
PJRST ECOD2##] ;RETURN ERROR CODE
POP P,T1
TLZ T1,LDL.TI!LDL.MM;CLEAR UNWANTED BITS
TOPMS1: EXCH T1,LDBMIC(U) ;EXCHANGE WITH OLD CONTENTS
AOS (P) ;GOOD RETURN
PJRST PUTWDU## ;AND GIVE IT BACK TO USER
;STILL IN IFN FTMIC
SUBTTL GET-- GET THE STATUS FROM THE USERS LDBMIC WORD
; MICGET - GET STATUS
;ADDR: LINE
; RETURN RESULT TO ADDR+1
TOPMGT: PUSHJ P,SAVE1## ;SAVE AN AC
SKIPN P1,LDBMIC(U) ;IS MIC RUNNING US?
JRST TOPMG1 ;NO FAIL RETURN
HRRZ F,LDBDDB(U) ;SET UP F
JUMPE F,TOPMG1 ;ZERO MEANS HE LOGGED OUT -LOOSE HIM
LDB J,PJOBN ;OTHERWISE - GET HIS JOB NO
PUSHJ P,UJBSTX## ;GO GET JBTSTS
TLZ P1,LDL.MM!LDL.TI!LDL.TO ;CLEAR VOLATILE BITS
TLNE T1,(1B2) ;IN MONITOR MODE?
TLO P1,LDLCHK!LDL.MM;YES - SET FLAGS
TLNE T1,(1B4) ;READY FOR I/P?
TLO P1,LDLCHK!LDL.TI;YES - SET FLAGS
IFN FTMLOG,<
HRRZ T1,LDBLOC(U)
SKIPE T1
TLO P1,LDLCHK!LDL.TO;SET TO FLAG
> ;END OF FTMLOG CONDITIONAL
SKIPGE 0(U) ;COMMAND WAITING?
TLZ P1,LDL.TI ;YES - CLEAR TI BIT
MOVE T1,P1 ;PUT LDBMIC INTO T1 FOR
AOS (P) ;GOOD RETURN
PJRST PUTWDU## ;RETURNING TO USER
TOPMG1: SETZB T1,LDBMIC(U) ;CLEAR DOWN LDBMIC
PJRST PUTWDU## ;AND EXIT
;STILL IN IFN FTMIC
SUBTTL RESPONSE--- RECORD AN ERROR MESSAGE
; MICRSP : RECORD ERROR MESSAGE
;ADDR: LINE NO.
; ADDRESS OF SPACE TO RETRIEVE RESPONSE
TOPMRS: SKIPE T2,LDBMIC(U) ;RUNNING MIC
TLNN T2,LDL.ER ;ERROR?
JRST TOPX4 ;NO
TLNN T2,LDL.SY ;MAKE SURE GOT TO INT LEVEL WITH SYNC
JRST TOPX4 ;NO
PUSHJ P,GETWRD## ;GET ADDRESS OF RESPONSE BUFFER
JRST TOPX3 ;ADDRESS CHECK
PUSHJ P,MICADC
JRST TOPX3 ;ADDRESS CHECK OF BUFFER
PUSHJ P,SAVE3## ;SAVE WORKING ACS
MOVSI P1,(<POINT 7,(R)>)
HRRI P1,(T1)
IFN FTKI10!FTKL10,< ;FTKI10 CONDITIONAL
PUSHJ P,RLCPTR ;RELOCATE BYTE POINTER
> ;END OF KI10 CONDITIONAL
MOVEI P2,<21*5>-1 ;MAX SPACE IN BUFFER
CAMLE P2,LDBTOC(U) ;GOT THIS MANY?
MOVE P2,LDBTOC(U) ;NO - USE LESSER
JUMPLE P2,TOPX4 ;NO CHARACTERS
SKIPN P3,LDBTOT(U) ;GET CHAR ADDRESS OF ERROR LINE
JRST TOPX4 ;HASN'T GOT ONE?
TOPMR1: IBP P3 ;GET NEXT CCHAR
MOVE T2,P3
PUSHJ P,TTGETC
MOVE P3,T2 ;ADVANCE TO NEXT CHUNK
TOPMR2: EXCTUU <IDPB T3,P1>
JUMPE T3,TOPMR3 ;EXIT HAVING MADE ASCIZ
SOJG P2,TOPMR1 ;GET NEXT CHAR
SETZ T3, ;MAKE ASCIZ
JRST TOPMR2
TOPMR3: MOVSI T1,LDL.RS!LDL.SY ;CLEAR RESPONSE FLAG
ANDCAM T1,LDBMIC(U)
AOS (P) ;GOOD RETURN TO THE USER
JRST XMTIN0 ;START UP TTY - GOOD EXIT
;STILL IN IFN FTMIC
SUBTTL LOG--- RECORD ALL UUO LEVEL OUTPUT
IFN FTMLOG,<
; MICLOG: RECORD ALL UUO LEVEL OUTPUT
;ADDR: LINE NUMBER
; ADDR LOG BUFFER
TOPMLG: SKIPE T2,LDBMIC(U) ;RUNNING MIC?
TLNN T2,LDL.LG ;WANT LOG FEATURE?
JRST TOPX4
PUSHJ P,GETWRD##
JRST TOPX3 ;ADDRESS CHECK
PUSHJ P,MICADC ;ADDRRESS CHECK ALL OF BUFFER
JRST TOPX3 ;ADDRESS CHECK
AOS (P) ;SET FOR GOOD RETURN TO THE USER
PUSHJ P,SAVE2## ;SAVE WORKING ACS
MOVSI P1,440700!R
HRRI P1,(T1)
IFN FTKI10!FTKL10,< ;KI10 CONDITIONAL
PUSHJ P,RLCPTR ;RELOCATE POINTER
> ;END OF KI10 CONDITIONAL
MOVEI P2,<21*5>-1
TOPML1: HRRZ T3,LDBLOC(U) ;PICK UP COUNT
JUMPE T3,TOPML2
SOS T3,LDBLOC(U) ;COUNT DOWN
MOVE T2,LDBLOT(U) ;GET TAKER
IBP T2 ;BUMP THE TAKER
PUSHJ P,TTGETC ;GET THAT CHUNK
PUSHJ P,FRECHK ;FREE CHUNK IF REQUIRED
MOVEM T2,LDBLOT(U) ;AND RESTORE CHAR ADDR
TOPML2: EXCTUU <IDPB T3,P1>
JUMPE T3,XMTWAK
SOJG P2,TOPML1
SETZ T3,
JRST TOPML2 ;LOOP UNTIL COUNT EXHAUSTED OR END BUFFER
> ;END OF FTMLOG CONDITIONAL
;STILL IN IFN FTMIC
SUBTTL SUBROUTINES CALLED FROM SCNSER AND OTHER PLACES
IFN FTMLOG,<
MICLGC: MOVE T1,LDBMIC(U) ;GET MIC STATUS
TLNN T1,LDL.LG ;LOGGING?
JRST MICLG1 ;NO-MIC HAS GIVEN UP MUST TIDY
MOVE T1,LDBTOP(U) ;MOVE TAKER TO PUTTER
MOVEM T1,LDBTOT(U) ;SO MIC CAN CATCH UP WITH PUTPUT
MOVE T1,LDBTOC(U) ;REMEMBER HOW MANY
ADDM T1,LDBLOC(U) ;KEEP TRACK FOR MIC
JRST MICLG2
;MIC HAS GONE AWAY MUST TIDY UP LOG BUFFER
MICLG1: MOVE T1,LDBLOT(U) ;MOVE PUTTER AND TAKER
MOVEM T1,LDBTOT(U)
MOVEM T1,LDBTOP(U) ;BACK UP
SETZM LDBLOT(U) ;ZAP LOG BUFFER
MICLG2: SETZM LDBTOC(U) ;ZAP COUNT
JRST ONPOPJ## ;AND EXIT
> ;END OF FTMLOG CONDITIONAL
;STILL IN IFN FTMIC
;SUBROUTINE TO ADDRESS CHECK A USER BUFFER
MICADC: PUSH P,M
PUSH P,T1
HRRI M,(T1)
PUSHJ P,GETWRD##
JRST MICAD1
HRRI M,21(M)
PUSHJ P,GETWRD##
TRNA
AOS -2(P)
MICAD1: POP P,T1
JRST MPOPJ##
;SUBROUTINE TO SET UP HORIZONTAL POSITION FOR MIC AND TO CHECK FOR
;OPERATOR AND ERROR CHARS IN COLUMN 1
MICPOS: PUSH P,T3 ;PRESERVE CHAR
TRZ T3,200 ;MASK OFF PARITY
PUSHJ P,SPCHEK ;GET CHARACTERISTICS OF CHAR
JRST MICPS2 ;NOT SPECIAL
TLNN T1,CHCRET ;IS IT <CR>?
JRST MICPS1 ;NOT - MUST CHECK OTHERS
TLO T2,LDLCL1 ;SET COL 1 FLAG IN MICLDB
MOVEM T2,LDBMIC(U)
JRST CHPOPJ ;AND RETURN
MICPS1: CAIE T3,177 ;IS IT A RUBOUT
CAIN T3,12 ;OR LINE-FEED
JRST CHPOPJ ;YES - NO CHECKING
MICPS2: TLZN T2,LDLCL1 ;ARE WE IN COLUMN 1?
JRST CHPOPJ ;NO - RETURN
LDB T1,LDP.OP ;GET OPERATOR CHAR
CAMN T1,T3 ;HAVE WE FOUND ONE?
TLO T2,LDLCHK!LDL.OP;YES - SET BITS
LDB T1,LDP.ER ;GET ERROR CHAR
CAMN T1,T3 ;ONE OF THOSE?
TLO T2,LDLCHK!LDL.ER;YES - SET ITS FLAGS
MOVEM T2,LDBMIC(U) ;STORE MIC WORD
JRST CHPOPJ ;RESTORE T3, AND RETURN
;STILL IN IFN FTMIC
IFN FTMLOG,<
; AROUTINE TO FREE THE MIC LOG BUFFER IF REQUIRED
MLOGOF: SKIPN LDBLOT(U) ;HAS NOT GOT ONE
POPJ P,0
CONO PI,PIOFF## ;SNEAKY PEEK
SKIPE LDBTOC(U) ;OUTPUT BUFFER IDLE
JRST ONPOPJ## ;NO FORGET IT
JRST MICLG1 ;YES-GO ZAP LOG BUFFER AND TURN ON PI
> ;END OF FTMLOG CONDITIONAL
;ROUTINE TO WAKE MIC UP WHEN CONTROLLED JOB REQUIRES INPUT
MICWAK: LDB T1,LDPMJN ;GET MASTER JOB #
CAMLE T1,HIGHJB## ;IS JOB # TOO BIG
JRST MICWA1 ;YES.. RETURN
MOVE T2,JBTSTS##(T1) ;CHECK JOB STATUS
TLNN T2,JLOG ;LOGGED IN?
JRST MICWA1 ;NO, JUST RETURN
PUSHJ P,WAKJOB ;GO WAKE MIC
MICWA1: MOVE T1,LDBDCH(U) ;RESTORE C(T1)
POPJ P, ;AND RETURN
MICECH: MOVSI T1,CHCRET ;CHECK IF <CR> TYPED
TDNN T1,-1(P) ;WITH CHARACTER BITS ON STACK
POPJ P, ;NO IT WASN'T - RETURN
MOVSI T1,LDLCL1 ;YES - SET COL 1 BIT
IORM T1,LDBMIC(U) ;IN LDBMIC
POPJ P, ;AND RETURN
MICRIC: CONSO PI,PI.IPA ;AT INTERRUPT LEVEL?
POPJ P, ;NO, THEN MIC TYPED IT
CAIE T3,1 ;IS THE CHAR A ^A
CAIN T3,201 ;WITH POSSIBLE PARITY?
JRST MICRIA ;YES - GO DEAL WITH ^A
TLO T1,LDLCHK!LDL.CC;SAY THAT ^C WAS TYPED
MOVEM T1,LDBMIC(U) ;PUT IT BACK
POPJ P, ;AND RETURN
MICRIA: TLO T1,LDLCHK!LDL.CA;SAY ^A
MOVEM T1,LDBMIC(U) ;PUT IT AWAY!
TRC T3,202 ;CONVERT CHAR INTO A ^C
MOVSI T1,CHBRK!CHCRE!CHCNC
IORM T1,-1(P) ;AND SET UP BITS TO LOOK LIKE ^C
POPJ P,
PTYMCK: CAIN T3,20
TLO T2,LDLCHK!LDL.CP
CAIN T3,2
TLO T2,LDLCHK!LDL.CB
MOVEM T2,LDBMIC(U)
TLNE T2,LDL.CP!LDL.CB
JRST RICB3
JRST PTYPT1
;HERE IF NO CHARACTERS IN OUTPUT BUFFER OF REMOTE LINES
MICRMT: SKIPE LDBMIC(U) ;IS THIS LINE RUNNING MIC
SKIPN LDBECC(U) ;YES--IS THERE ANYTHING IN HIS ECHO BUFFER
POPJ P,0 ;NO TO BOTH OR EITHER
PJRST XMTECH ;YES TO BOTH
;GO AND DEAL WITH ECHO OF MIC UUO LEVEL TYPE IN
> ;END IFN FTMIC
SUBTTL SUBROUTINES FOR I/O
;SUBROUTINE TO READ A CHARACTER AND KEEP THE BREAK COUNT RIGHT
;IT IS ASSUMED THAT THE CALLER HAS DONE ANY NECESSARY WAITING. THERE
;ARE TWO UNUSUAL CASES: FIRST, IF THERE ARE NO CHARACTERS IN THE
;BUFFER, TYI WILL NON-SKIP RETURN. IF THE CHARACTER READ IS A
;CONTROL C, AND IF THE TELETYPE IS IN USER MODE, NOT SLAVED,NOT
;IN IMAGE INPUT STATE, AND NOT RUNNING UNDER JACCT, THEN TYI CALLS
;ROUTINES TO PUT CONSOLE AT MONITOR LEVEL, AND GOES BACK INTO I/O
;WAIT UNTIL A POSSIBLE CONTINUE COMMAND.
TYICC: PUSHJ P,SAVE3## ;P1 IS BYTE POINTER, P2 COUNT
SETZM P3 ;WAIT OK
JRST TYIC1 ;DO NOT ZERO NUMBERS
TYIM: SETZB P1,P2 ;INDICATE NO BUFFER
TYIC1: TRNE S,IODERR ;HAS HE GOTTEN A ^C?
POPJ P, ;YES, FORGET IT
PUSHJ P,TYIEAT ;EAT OLD COMMAND IF STILL THERE
MOVEI T1,L2RIRH ;INPUT RACE
ANDCAM T1,LDBBY2(U) ; HASN'T HAPPENED YET
MOVSI T1,LPLIRS ;SET INPUT RACE SYNC BIT
IORM T1,LDBPAG(U) ; IN LDB
SOSGE LDBTIC(U) ;COUNT CHARACTERS
JRST TYIA ;NONE THERE.
IBP LDBTIT(U) ;COUNT THE INPUT POINTER
MOVE T2,LDBTIT(U) ;AND RESTORE
PUSHJ P,TTGETC ;READ THE CHARACTER
PUSHJ P,TYIB ;FREE UP CHUNK, STORE NEW ADDR
MOVSI T1,LPLIRS ;SET TO CLEAR IRS BIT
CONO PI,PIOFF## ;NO PI'S HERE
ANDCAM T1,LDBPAG(U) ;CLEAR BIT
MOVEI T1,L2RIRH ;INPUT RACE HAPPENED BIT
TDNE T1,LDBBY2(U) ;DID ^U HAPPEN (ANY CLRBFI)
JRST TSETI2 ;YES--DO REST OF FUNCTION
CONO PI,PION## ;ALL PI'S
PUSH P,T3 ;PRESERVE CHAR.
SKIPG LDBTIC(U) ;IS THIS THE LAST CHARACTER IN THE BUFFER
PUSHJ P,CHKXON ;YES, GO CHECK IF XON IS NEEDED
POP P,T3 ;RESTORE CHAR.
HRRZ T1,LDBDDB(U) ;GET DDB FOR PIM TEST
JUMPE T1,TYIC ;NO DDB, CANT BE PIM
MOVE T1,DEVIOS(T1) ;GET MODE WORD
TRNE T1,PIMMOD ;PIM?
JRST CPOPJ1## ;YES, DONE HERE
TYIC: MOVE T1,LDBBKU(U) ;GET CONTROL-U POINTER
CAMN T1,T2 ;JUST CROSS THE LINE?
SETZM LDBBKU(U) ;YES. CLEAR CONTROL-U POINTER.
PUSHJ P,SPCHEK ;SEE WHAT KIND OF CHARACTER IT IS
JRST CPOPJ1## ;NOTHING SPECIAL
JUMPE T3,TYIM ;IF NULL, SKIP IT.
TLNE T1,CHALT ;SOME ALT CHR?
TLNE U,LDLFCS ;FULL CHR SET?
CAIA ;NO COVERSION
PUSHJ P,RIALTO ;CONVERT TO ESC
TLNE T1,CHBRK ;BREAK CHARACTER?
SOS LDBBKC(U) ;YES. COUNT IT DOWN.
JUMPE F,CPOPJ1## ;GOOD RETURN IF NO DDB
TLNN T1,CHCNC ;CONTROL C CHARACTER?
JRST CPOPJ1## ;NO JUST RETURN TO CALLER
MOVE T1,DEVMOD(F) ;GET SOME BITS
TLNN T1,TTYATC ;IS TTY CONTROLLING A JOB?
JRST CPOPJ1## ;NO, RETURN CHAR
HLL U,LDBDCH(U) ;GET LINE STATE FLAGS
PUSHJ P,CNCCHK ;SEE IF IT IS A CONTROL C
JFCL ;YES, STORE
JRST CPOPJ1## ;YES, BUT IT SHOULD BE STORED.
MOVE S,[XWD IOW,IOACT]
IORB S,DEVIOS(F)
SKIPN P3 ;WAIT?
PUSHJ P,TIWAIT ;NOW WAIT IN CASE TYPE CONTINUE
JUMPE P1,TYIM ;DONE IF NO PTR
MOVE T2,P2 ;SETUP FOR LOOP
MOVE T3,P1 ;SETUP FOR LOOP
TYICLP: HRRZ T1,T3 ;COPY ADDRESS
IBP T3 ;INCREMENT
PUSHJ P,UADRCK## ;MAKE SURE IT IS GOOD
SOJG T2,TYICLP ;LOOP OVER BUFFER
JRST TYIM ;AND LOOP AROUND AGAIN.
TYIS: PUSHJ P,SAVE3## ;REALLY SHOULD DO IT
SETOM P3 ;FLAG DON'T WAIT IF NOTHING THERE
JRST TYIM
TYI: PUSHJ P,SAVE3##
SETZM P3 ;FLAG WAIT IF GET ^C-CONT
JRST TYIM
TYIA: CONO PI,PIOFF## ;FREEZE TYPEIN COUNT
ANDCAM T1,LDBPAG(U) ;CLEAR INPUT RACE SYNC BIT
AOSLE LDBTIC(U) ;RESTORE CHAR COUNT
JRST ONPOPJ ;RESTORE PI AND NON SKIP RETURN
SETZM LDBBKU(U) ;CLEAR BREAK POSITION
SETZM LDBBKC(U) ;AND COUNT, SINCE EMPTY
JRST ONPOPJ ;RESTORE PI AND NON SKIP RETURN
TYIB: MOVEM T2,LDBTIT(U) ;STORE THE NEW T2
HLL U,LDBDCH(U) ;GET LINE DESCRIPTOR BITS
PJRST FRECHK ;T1 STILL AS TTGETC LEFT IT!
;RETURN CHUNK, THEN BACK INTO TYI
;SUBROUTINE TO DISCARD A COMMAND FROM INPUT BUFFER IF LDLECS STILL ON
TYIEAT: HLL U,LDBDCH(U) ;GET BITS FOR DEVICE
TLNN U,LDLECS ;STILL WANT COMMAND EATEN?
POPJ P,0 ;NO. RETURN.
TYIL: SKIPG LDBTIC(U) ;STILL CHARACTERS LEFT?
JRST TYID ;NO. QUIT.
MOVEI T1,L2RIRH ;INPUT RACE HAPPENED BIT
ANDCAM T1,LDBBY2(U) ;INDICATE NO PROBLEM YET
MOVSI T1,LPLIRS
IORM T1,LDBPAG(U)
SOS LDBTIC(U) ;COUNT ONE DOWN.
IBP LDBTIT(U) ;COUNT UP TO CHARACTER
MOVE T2,LDBTIT(U) ;AND INTO T2
PUSHJ P,TTGETC ;GET THE CHARACTER
PUSHJ P,TYIB ;MOVE UP CA.
MOVSI T1,LPLIRS ;SET TO CLEAR INPUT RACE SYNC
CONO PI,PIOFF##
ANDCAM T1,LDBPAG(U)
MOVEI T1,L2RIRH ;INPUT RACE HAPPENED BIT
TDNE T1,LDBBY2(U) ;WAS TSETBI CALLED AT INTERRUPT LEVEL?
JRST TSETI2 ;YES, FINISH CLEARING LINE
CONO PI,PION##
MOVE T1,LDBBKU(U) ;GET BREAK POSITION
CAIE T1,0 ;NONE AT ALL, OR
CAMN T1,T2 ;HERE?
SETZM LDBBKU(U) ;YES. CLEAR CONTROL U POINTERS
PUSHJ P,SPCHEK ;GET CHARACTER DESCRIPTORS
JRST TYIL ;ORDINARY
TLNE T1,CHBRK ;BREAK CHAR?
SOSA LDBBKC(U) ;YES. COUNT IT AND QUIT
JUMPN T3,TYIL ;NO. LOOP IF STILL SOME TO GO
TYID: MOVSI T1,LDLECS ;NOW CLEAR THE BIT
ANDCAM T1,LDBDCH(U) ;IN THE DEVICE WORD
POPJ P,0
CCTYI:: SKIPE T2,TTCMCA ;ADDRESS THERE TO USE?
CAMN T2,LDBTIP(U) ;YES. CAUGHT UP TO PUTTER?
JRST CCTYI1 ;NO CHARACTERS TO GET
IBP T2 ;YES. GET NEXT CHARACTER
PUSHJ P,TTGETC ;GET CHAR
JFCL ;IGNORE NON-SKIP RETURN
EXCH T2,TTCMCA ;STORE UPDATED POINTER. T2 NOW
; HAS OLD POINTER
JUMPN T2,CPOPJ## ;DONE IF OLD POINTER
SETZM TTCMCA ;STOPCM CALLED BETWEEN SKIPE AT
; CCTYI AND EXCH. PRESERVE 0
CCTYI1: MOVEI T3,12 ;RETURN BREAK CHAR
POPJ P,0 ;SINCE NONE THERE
;SUBROUTINE TO SEE IF A CONTROL C SHOULD BE ACTED ON OR STORED.
;NON-SKIP MEANS STORE IT.
;SKIP MEANS JACCT SET
;DOUBLE SKIP MEANS .HALT DONE.
CNCCHK: TLNE U,LDLSLV+LDLIMI ;SHOULD ^C BE RETURNED?
POPJ P,0 ;YES.
AOS (P) ;ADVANCE RETURN
PUSH P,T1 ;MAYBE NOT. SAVE T1.
IFN FTLOGIN,<
HRRZ F,LDBDDB(U) ;GET LINE'S JOB
JUMPE F,CNCCK1 ;IF NO DDB ATTACHED, ASSUME SHOULD DO ^C
LDB T1,PJOBN## ; ..
MOVE T1,JBTSTS##(T1) ;GET JOB STATUS WORD
TDNE T1,[XWD JACCT,JS.DEP] ;IS ^C LEGAL? (PRIVELDGED PROG OR
; DAEMON ERROR PAUSE)
JRST TPOPJ## ;NO. GIVE IT TO CUSP
>
PUSHJ P,CNCMOD
CNCCK1: PUSHJ P,TTHALT ;FORCE CONTROL C
JRST TPOPJ1## ;RESTORE T1, SKIP RETURN
CLRIIQ: HRRZ F,LDBDDB(U) ;GET DDB, IF ANY.
JUMPE F,CLRIM1 ;CLEAR BIT IF NO DDB
MOVE S,DEVIOS(F) ;GET STATUS WORD.
TRNE S,I ;IF STILL IMAGE, DON'T CLEAR BIT
POPJ P,0 ;IMAGE. JUST RETURN
CLRIMI: HRRZ F,LDBDDB(U) ;GET ATTACHED JOB, IF ANY
JUMPE F,CLRIM1 ;IF NONE, SKIP PART OF THIS
MOVSI S,FRCEND ;ALSO CLEAR FORCED END OF FILE BIT
ANDCAB S,DEVIOS(F)
CLRIM1: MOVSI T1,LDLIMI ;NO. CLEAR IMAGE BIT AND TIME
DPB T1,LDPTIM ; ..
ANDCAM T1,LDBDCH(U) ; ..
POPJ P,0 ; AND RETURN
;ROUTINE TO MAKE THIS TTY VISIBLE TO COMMAND DECODER, IF AT COM LEVEL
;CALL WITH LINE SET UP
COMSET::PUSHJ P,COMQ ;IS LINE AT COMMAND LEVEL?
POPJ P,0 ;NO. JUST RETURN
MOVSI T1,LDBCMR ;OK. SET REQUEST BIT
COMST1: CONO PI,PIOFF## ;CAN'T LOOK AT 0(U) HERE
SKIPL 0(U) ;WAS COMMAND REQUEST ON?
AOS COMCNT## ;NO. WAKE COMCON
IORM T1,0(U) ;SET THE BITS IN 0(U)
CONO PI,PION## ;FALL INTO CMDSET
;SUBROUTINE TO SET/CLEAR BIT IN COMMAND MAP
CMDSET::SKIPA T1,[IORM T3,CMDMAP##(T2)]
CMDCLR::MOVE T1,[ANDCAM T3,CMDMAP##(T2)]
PUSH P,T3 ;SAVE T3
SETZM T3
LDB T2,LDPLNO ;GET LINE #
LSHC T2,-5 ;SET TO WORD ADDRESS
ROT T3,5 ;BIT WITHIN WORD
MOVE T3,BITTBL##(T3) ;GET THE BIT
XCT T1 ;SET OR CLEAR
PJRST T3POPJ## ;RETURN
;ROUTINE TO PUT TTY INTO MONITOR COMMAND MODE. DON'T CALL THIS
;ROUTINE IF TTY IS A SLAVE, UNLESS YOU WANT SLAVE BIT CLEARED TOO.
;CALL WITH LINE SET.
CNCMOD::MOVSI T1,LDLOSU+LDLIMI+LDLNEC+LDLDLR+LDLBKA+LDLECS
ANDCAM T1,LDBDCH(U) ;CLEAR ALL THESE BITS
PUSH P,F ;MAKE SURE THAT PIMMOD
MOVEI T1,PIMMOD ;IS NOT SET IN THE
HRRZ F,LDBDDB(U) ;DDB
SKIPE F ;
ANDCAM T1,DEVIOS(F) ;
POP P,F ;
MOVSI T1,LDLCOM ;AND SET THIS ONE
IORB T1,LDBDCH(U) ; ..
TRNE T1,LDRPTY ;IS THIS LINE PTY-DRIVEN?
PUSHJ P,PTMNMD## ;YES. TELL PTYSER ABOUT IT.
PJRST NOCTRO ;BE SURE REMOTES ARE INFORMED
;SUBROUTINE TO SKIP IF TTY IS AT COMMAND LEVEL AND NOT SLAVED
COMQ: SKIPGE 0(U) ;LDBCMR ON?
JRST CPOPJ1## ;YES. ASSUME COMMAND LEVEL
HLL U,LDBDCH(U) ;GET LINE STATE
TLNE U,LDLCOM ;AT TOP LEVEL?
TLNE U,LDLSLV ;AND NOT SLAVED?
POPJ P,0 ;NO. JUST RETURN
HRRZ F,LDBDDB(U) ;IS LINE ATTACHED TO A JOB?
JUMPE F,CPOPJ1## ;JUMP IF NOT
PUSH P,T1 ;SAVE AN AC
MOVE T1,DEVMOD(F) ;GET DEVICE ASSIGN BITS
TLNE T1,TTYATC ;ATTACHED TO JOB?
JRST TPOPJ1## ;YES. SKIP RETURN
LDB T1,PJOBN## ;IS JOB NUMBER ZERO?
JUMPE T1,TPOPJ1## ;IF SO,SKIP RETURN
JRST TPOPJ## ;IF NOT ATTACHED, CAN'T DO COMMAND
TTFCOM:: ;FORCED COMMAND TABLE
PHASE 0
TTFCXC:!SIXBIT /.HALT/ ;CONTROL C
IFN FTMODM,<
TTFCXD::!SIXBIT /.BYE/ ;DATAPHONE DISCONNECT
TTFCXH::!SIXBIT /.HELLO/ ;DATAPHONE CONNECT
>
TTFCXR::!SIXBIT /.RESTA/ ;SYSTEM RESTART
TTFCXK:!SIXBIT /KJOB/ ;FORCED KILL JOB
IFN FTCCLX,<
TTFCXI::!SIXBIT /INITIA/ ;INITIALIZING CUSP CALL
>
IFN FTJCON,<
TTFCXJ::!SIXBIT /.FCONT/ ;FORCED CONTINUE
>
IFN FTDAEM!FTSET,<
TTFCXU::!SIXBIT /.DUMP/ ;CCL RUN OF DUMP
>
TTFCXT:!SIXBIT /.TYPE/ ;RETYPE LINE
IFN FTWATCH,<
TTFCXW:!SIXBIT /USESTA/ ;1 LINE SYSTAT
>
IFN FTNET,<
TTFCXL::!SIXBIT /.NETLD/ ;AUTO DOWN LINE LOAD OF DAS80'S SERIES.
>
TTFCXS:!SIXBIT /HALT/ ;STOP JOB REGARDLESS OF ^C TRAPPING
IFN FTPATT,<
TTFCXX:!SIXBIT /CTEST/ ;FOR PATCHING
>
DEPHASE
TTFCML==:.-TTFCOM
MTTFCM==:-TTFCML ;MINUS LENGTH OF FORCED COMMAND TABLE
IFG TTFCML -20,<PRINTX ?TOO MANY FORCED COMMANDS!>
SUBTTL COMMAND LEVEL ROUTINES
;ROUTINE TO SET UP TO READ A COMMAND FROM ANY REQUESTING LINE
;CALL FROM CLOCK LEVEL:
; PUSHJ P,TTYCOM
; NONE FOUND
; FOUND ONE ;F, U SET UP. J HAS JOB # IF ANY,
; ;T2 HAS TYPEIN T2
TTYCOM::MOVE T1,LINSAV## ;LAST COMMAND LINE +1
CAIL T1,TTPLEN## ;GREATER THAN HIGHEST LINE #?
TTYCM0: SETZB T1,LINSAV## ;YES, START AT LINE 0
LSH T1,-5 ;SHIFT TO RIGHT PLACE
HRLI T1,TTCMPT##(T1) ;FORM AN AOBJN POINTER
TTYCM1: SKIPE T2,CMDMAP##(T1) ;GET A WORD OF BITS
TTYCM2: JFFO T2,TTYCM3 ;FIND FIRST ONE BIT
AOBJN T1,TTYCM1 ;LOOP TO TOP OF TABLE
SKIPE LINSAV## ;LOOKED AT THE ENTIRE TABLE?
JRST TTYCM0 ;NO, STATY AT THE BEGINNING
POPJ P,0 ;GIVE FAIL RETURN
TTYCM3: MOVEI T4,(T1) ;COPY WORD #
LSH T4,5 ;SHIFT TO RIGHT PLACE
ADDI T4,(T3) ;ADD IN BIT NUMBER
CAML T4,LINSAV## ;SKIP IF LINE IS TOO SMALL
JRST TTYCM4 ;ELSE FIX # AND PROCESS
TDZ T2,BITTBL##(T3) ;CLEAR BIT
JRST TTYCM2 ;AND TRY NEXT
TTYCM4: MOVEM T4,LINSAV## ;SAVE THIS LINE #
AOS (P) ;GIVE SKIP RETURN
TTCM4A: HRRZ U,LINTAB##(T4) ;PICK UP LDB POINTER
TRESCN::HRRZ F,LDBDDB(U) ;GET DDB ADDRESS IF ANY
JUMPE F,TRESC1 ;JUMP IF NO DDB
MOVE T3,DEVMOD(F)
TLNN T3,TTYATC
TRESC1: TDZA J,J
LDB J,PJOBN##
MOVE T3,0(U) ;KILL OR COMMAND?
TLNN T3,LDBCMF ;FORCED COMMAND?
TLNN T3,LDBCMK ;NO, FORCED KJOB?
JRST .+2 ;NO.
JRST TTYCM5 ;FORCED KJOB!
;DO FORCED COMMANDS 1ST, THEN FORCED KJOBS, THEN TYPED-IN COMMANDS
HRRM U,CMDLIN ;MUST BE SAVED WHEN TTCMCA IS USED
MOVE T2,LDBTIT(U) ;GET TYPEIN CHAR ADR
MOVEM T2,TTCMCA ;AND SAVE IT FOR CCTYI
HRRI T3,40 ;PRIME THE TYI ROUTINE
TLNE T3,LDBCMF ;IS IT A FORCED COMMAND?
MOVEI T3,12 ;YES. PREVENT EXTRA ARGUMENTS
HRRZM T3,TTCMCH ;JUST FOR SURE.
PUSHJ P,FNDPDB## ;ADDRESS OF PDB
JFCL
POPJ P,0
TTYCM5: MOVEI T1,TTFCXC ;FORCE HALT 1ST SINCE IF TTKJOB IS CALLED DURING A COMMAND
SKIPGE JBTSTS##(J) ;MUST BE A JOB. IS IT RUNING
JRST TTYCM6 ;NO. JUST KILL IT
MOVSI T1,LDBCMK ;CLEAR KILL
ANDCAM T1,0(U) ;FLAG
MOVEI T1,TTFCXK
TTYCM6: PUSHJ P,TTFORC ;FORCE COMMAND
;DON'T CALL CMDCLR, OR DELAYED COMMAND WILL NEVER BE SEEN AGAIN
MOVE T4,LINSAV## ;FIND LINE
JRST TTCM4A ;AGAIN
TTKJOB::PUSHJ P,CNCMOD ;CONSOLE TO COMMAND LEVEL
MOVSI T1,LDBCMK ;SET KILL REQUEST
IORM T1,0(U) ;IN LDB
HRRZ F,LDBDDB(U)
SKIPE J,F
LDB J,PJOBN##
AOS COMCNT## ;MAKE COMCON SEE IT
SKIPL JBTSTS##(J) ;SKIP IF JOB IS IN RUN STATE
; THIS DEPENDS UPON:
; 1. RUN BIT BEING SIGN OF JBTSTS
; 2. J=0 IF NO JOB
; 3. JBTSTS+0 = 0
PJRST CMDSET
TTHALT: ;THIS ROUTINE DOES NOT SET TTY TO
; COMMAND LEVEL BECAUSE JACCT
; PROGRAMS MAY STILL NEED TO TYPEOUT
; AND THAT WOULD BLOCK THEM IN TO
MOVEI T1,TTFCXC ;HALT COMMAND INDEX
PJRST TTFORC ;FORCE THE ^C
;ROUTINES TO ATTACH TTY TO A JOB
;1) CALL WHEN COMMAND DECODER DECIDES TO CREATE A JOB DUE TO
;A COMMAND BEING TYPED IN. THE LDB WILL ALREADY HAVE BEEN
;SET UP, BUT IT IS NOT YET LINKED TO A DDB
;CALL: MOVE LINE,ADDRESS OF LDB
; MOVE J,NEW JOB NUMBER
; PUSHJ P,TTYATI
; ERROR RETURN ;ALREADY SOMEONE THERE (DDB POINTS AT HIM), OR
;NO MORE FREE DDB'S (DDB CONTAINS 0)
; OK RETURN ;DDB, DDBLDB, AND LDBDDB SET UP
;2) CALL FROM COMMAND DECODER ON AN ATTACH COMMAND.
;CALL: MOVE LINE,ADDRESS OF LDB
; MOVE J,JOB TO ATTACH TO
; PUSHJ P,TTYATT
; ERROR RETURN ;SOMEONE ALREADY ATTACHED (DDB POINTS TO HIM) OR
;NO SUCH DDB (DDB=0)
; OK RETURN ;DDB, LDBDDB, NEW DDBLDB SET UP. OLD DDBLDB CLEARED
IFN FTATTACH,<
TTYATT::PUSH P,U
PUSHJ P,TTYISA ;SEE IF DDB FOR TARGET JOB CAN BE ATTACHED
JRST LPOPJ## ;NO, CAN'T DO IT
IFE FTPI,<
JUMPE T1,TTYAT2 ;JUMP IF NO JOB IS ATTACHED TO LINE
>
IFN FTPI,<
JUMPE T1,TTYAT1 ;JUMP IF DETACHED BUT SIGNAL DETACHING
>
MOVEM T1,(P) ;SAVE LDB OF TARGET JOB
LDB T1,LDPLNO ;OPERATOR DOING PREEMPTIVE ATTACH
; GET OPERATOR'S LINE NUMBER
EXCH U,0(P) ;GET LDB OF OBJECT JOB
LDB T3,LDPLNO ;GET ITS LINE NUMBER TOO
CAIE T3,0(T1) ;ARE THEY THE SAME? (OPR ATTACHING
; TO HIMSELF?)
PUSHJ P,PTYDET ;NO. DETACH OBJECT JOB, NOW IN LINE.
; MUST RESPECT F
;F NOW POINTS TO JOB BEING
;PICKED UP BY TTY IN 0(P)
JRST TTYAT2 ;GO DO THE ATTACH
IFN FTPI,<
TTYAT1: PUSHJ P,SIGDET ;SIGNAL DETACHING
JRST TTYAT2 ;GO DO THE ATTACH
>
>
TTYATI::PUSH P,U ;SAVE LINE DATA BLOCK ADDRESS
PUSHJ P,TTYSRC ;SEE IF THERE'S ALREADY A DDB. SHOULDNT BE.
PUSHJ P,DDBSRC ;OK. GET A NEW DDB.
JRST LPOPJ## ;ERROR. EITHER TTYSRC WON OR DDBSRC LOST
TTYAT2: MOVE U,0(P) ;GET LDB ADDR FROM STACK
PUSH P,F ;AND SAVE NEW DDB ADDRESS
HRRZ F,LDBDDB(U) ;GET OLD DDB IF ANY
SKIPE F ;ANY THERE?
PUSHJ P,TTYDT1 ;YES. DETACH FROM IT BUT DON'T SET MONITOR CODE
SKIPN U ;SKIP IF LDB WAS FOUND
PUSHJ P,TTYKLQ ;NO, KILL OFF DDB
MOVE F,0(P)
IFN FTMODM,<
MOVE U,-1(P) ;GET LDB ADDRESS, FOR DS POINTER
MOVSI T1,LDBCMF
TDNE T1,(U)
JRST TTYAT3
MOVE T1,LDBDCH(U) ;LOOK AT DATA SET BIT
TRNN T1,LDRDSD ;IF NOT A DATA SET
JRST TTYAT3 ;NO DSCTAB ENTRY
LDB U,LDPDSC ;GET DATASET TABLE INDEX
MOVEI T1,0 ;CLEAR TIME FIELD OF DATASET ENTRY
DPB T1,DSTMPL ; ..
>
TTYAT3: MOVE U,-1(P) ;ATTACH LDB FROM STACK TO DDB
MOVE T1,[XWD TTYATC,ASSCON] ;SET ATTACHED AND ASSIGNED BITS
IORM T1,DEVMOD(F) ;IN THE DEV DATA BLOCK
HRRM F,LDBDDB(U) ;SET LINK FROM DDB TO LDB
HRRM U,DDBLDB(F) ;AND LINK FROM LDB TO DDB
PUSHJ P,SETDVL## ;AND JOB NUMBER IN DDB
HRRZM F,TTYTAB##(J) ;STORE CONTROLLING DDB BY JOB NUMBER
PUSHJ P,SCNNAM ;SET UP PHYSICAL LINE NAME AND PUNIT
IFN FTNET,<
PUSHJ P,SETSTA ;SET CORRECT STATION NUMBER
>
;CONTINUED ON NEXT PAGE
;THIS CODE MAKES SURE BATCH BIT STAYS CORRECT
IFN FTATTA&FTTLIM&FTPTYUUO,<
PUSHJ P,CTLJBU## ;GET PTY LDB IF ANY
MOVSI T1,DVDIBP ;GET BATCH PTY BIT
MOVE T2,JBTLIM##(J) ;GET JBTLIM
TDNN T1,DEVCHR(F) ;IS IT A BATCH PTY?
JRST TTYAT4 ;NO
TLON T2,(JB.LBT) ;YES, MAKE IT A BATCH JOB
AOS BATNUM ;AND COUNT UP BATNUM
MOVEM T2,JBTLIM##(J) ;RESTORE JBTLIM
TTYAT4:
>
;END FTATTA&FTTLIM&FTPTYUUO
IFN FTPI,<
LDB T2,LDPLNO
ADDI T2,.UXTRM
SIGNAL C$DATT
EXCTUU <MOVEM T2,IBKISW##(M)>
> ;END FTPI
POP P,F
JRST UPOPJ1## ;SKIP RETURN TO COMCON.
;SUBROUTINE TO LOOK FOR POSSIBLE LINE ALREADY ATTACHED TO TARGET JOB
;ARGS U=LINE ATTACH WAS TYPED OR
; J=JOB NUMBER OF TARGET JOB
;VALUES T1=ADDR OF LDB ATTACHED TO TARGET JOB OR 0 IF NONE
;NON-SKIP RETURN IF NO DDB FOR TARGET JOB OR DDB FOUND BUT MANY NOT ATTACH
;SKIP RETURN IF DDB FOUND AND MAY ATTACH TO IT
TTYISA::PUSHJ P,SAVE2## ;SAVE P1 AND P2
PUSH P,U ;SAVE LINE BLOCK ADR OF GUY TYPING COMMAND
PUSHJ P,TTYSRC ;FIND THE DDB CONTROLLING THAT JOB
JRST LPOPJ## ;THERE ISN'T ANY. COMCON HAS GOOFED?
SETZ T1,
JUMPE U,LPOPJ1## ;IF NONE ATTACHED, GO ATTACH.
EXCH U,0(P) ;SOMEONE IS ATTACHED. ONLY THE OPERATOR
;MAY USURP THE EXISTING CONNECTION
IFN FTLOGIN<
PUSH P,F ;SAVE NEW DDB
HRRZ F,LDBDDB(U) ;DDB OF OLD USER
SKIPE T1,F ;IF F=0, MAKE T1 0, SINCE PJOBN IS MEANINGLESS IF F=0
LDB T1,PJOBN## ;HIS JOB NUMBER
LDB P1,LDPLNO ;GET TTY LINE # IN P1
SUBI P1,PTYOFS## ;SUBTRACT OFFSET OF PTY0
JUMPL P1,TTYIS1 ;SEE IF A PTY
CAIGE P1,PTYN## ; ..
SKIPA F,PTYTAB##(P1) ;IT IS A PTY, GET DDB
TTYIS1: TDZA P1,P1 ;NOT A PTY, USE JOB 0
LDB P1,PJOBN## ;GET JOB OWNING PTY
POP P,F ;RESTORE F
MOVE P2,FSFPPN## ;GET [1,2]
CAME P2,JBTPPN##(T1) ;IS JOB THAT TYPED COMMAND [1,2]?
CAMN P2,JBTPPN##(P1) ;OR COMMAND TYPED BY SON OF OPR?
JRST TPOPJ1## ;YES, ATTACH IS LEGAL
>
HRRZ T1,OPRLDB##
CAIE T1,0(U) ;IS THIS THE OPR?
JRST TPOPJ## ;NO. DISCARD OBJECT JOB'S LDB FROM
JRST TPOPJ1## ;STACK, AND GIVE ERROR RETURN TO COMCON
;WITH DDB POINTING AT GUY ALREADY ATTACHED
;ROUTINE TO DETACH TTY FROM A JOB.
;CALL: MOVE F,ADDRESS OF TTY DDB TO BE DETACHED
; PUSHJ P,TTYDET
; ALWAYS RETURN HERE
;CALLED FROM TTYATT AND COMCON (DETACH COMMAND)
;KILLS DDB IF NOT ATTACHED, ASSIGNED, OR INITED
;CLEARS LINKS TO DDB
;RESPECTS DDB
TTYDET::
IFN FTPI,<
PUSHJ P,SIGDET
>
HRRZ U,DDBLDB(F) ;GET LDB ADDRESS
LDB T1,PJOBN## ;GET JOB NUMBER
MOVE T1,JBTSTS##(T1) ;IS HE LOGGED IN?
TLNE T1,JLOG ; ..
JRST PTYDET ;YES, LOGGED IN
LDB T2,PJOBN## ;GET JOB NUM
MOVE T1,[SIXBIT/LOGOUT/] ;DONT CLEAR
CAMN T1,JBTNAM##(T2) ;FOR LOGOUT SINCE USER COULD
JRST TTKJOB ;THEN GET OUT OVER QUOTA
MOVSI T1,JACCT ;CLEAR JACCT
ANDCAM T1,JBTSTS##(T2) ;IN STATUS
JRST TTKJOB ;GO KILL HIM
PTYDET::PUSHJ P,TTYDT1 ;DISCONNECT DDB FROM LDB
JUMPE U,TTYKLQ ;IF NO LDB KILL OFF DDB
PUSHJ P,CNCMOD ;MAKE SURE LDB AT TOP LEVEL
;ROUTINE TO KILL DDB IF IT IS AN IDLE TTY DDB
TTYKLQ::PUSH P,T1 ;RESPECT T1
MOVE T1,DEVMOD(F) ;GET DEVICE MODE AND USE BITS
TLNE T1,DVTTY ;IS IT A TTY DDB?
TDNE T1,[XWD TTYATC,ASSCON+ASSPRG] ;YES, ANY REASON TO KEEP DDB?
JRST TPOPJ## ;YES.
PUSHJ P,TTYKIL ;NO. GO KILL THE DDB
JRST TPOPJ## ;AND RESTORE T1 ON RETURN
;SUBROUTINE TO DISCONNECT A TTY FROM A JOB WITHOUT SETTING TTY TO MONITOR LEVEL
;THIS IS SO ATTACH UUO WILL LEAVE TTY AT ITS ORIGINAL LEVEL (MONITOR OR USER MODE)
TTYDT1: HRRZ U,DDBLDB(F) ;GET LINKED LINE ADDRESS
HLLZS DDBLDB(F) ;DISCONNECT LDB FROM DDB
JUMPE U,TTYDTX ;IF NO LDB, KILL OFF DDB
HLLZS LDBDDB(U) ;DISCONNECT DDB FROM LDB
HRRZS DEVNAM(F) ;CLEAR LH OF DEVNAM TO NOT CONFUSE DEVCHR, ETC.
;KEEP RH FOR SYSTAT, ETC.
IFN FTDAEM!FTTLIM,<
LDB T1,PJOBN## ;SEE IF THIS JOB WAITING FOR DAEMON
>
IFN FTTLIM,<
MOVSI T2,(JB.LBT) ;BATCH BIT
TDNE T2,JBTLIM##(T1) ;IF WAS BATCH JOB
SOS BATNUM## ;DECR. BATCH JOB COUNT
ANDCAM T2,JBTLIM##(T1) ;CLEAR BIT SO OPERATOR CAN DETACH
>
IFN FTDAEM,<
MOVE T1,JBTSTS##(T1) ;GET JOB STATUS WORD
TRNN T1,JDC ;DCORE COMMAND WAITING?
>
PUSHJ P,TYIEAT ;NO. CLEAR ANY PENDING COMMAND
MOVE T1,LDBDCH(U) ;GET LINE CHARACTERISTICS
TRNE T1,LDRPTY ;A PTY LINE?
PUSHJ P,PTMNMD## ;YES. WAKE CONTROLLER
TTYDTX: POPJ P,
IFN FTPI,<
SIGDET: SIGNAL C$DATTY
EXCTUU <SETOM IBKISW##(M)>
POPJ P,
>
;ROUTINE TO RELEASE A TTY DDB. CALL WITH DDB SET UP.
TTYREL::MOVE T1,[XWD IOW,IOACT] ;CLEAR OUT S
ANDM T1,DEVIOS(F) ; IN CORE
SKIPE DINITF## ;IN SYSINI?
JRST TTYRL2 ;YES--SKIP THIS
HRRZ T1,USRHCU## ;HIGHEST CHANNEL IN USE
TTYRL1: HRRZ T2,USRJDA##(T1) ;ADDRESS OF AN INITED DDB
CAIE T1,(P1) ;CHANNEL BEING RELEASED?
CAIE T2,(F) ;NO, SAME DDB OPENS ON ANOTHER CHANNEL
SOJGE T1,TTYRL1 ;NO
JUMPGE T1,TTYRS1 ;JUMP IF OPEN ON ANOTHER CHANNEL
IFN FT2741&FTCAFE <
HRRZ U,DDBLDB(F) ;GET LINE BLOCK ADR
JUMPE U,TTYRL2
MOVSI T1,LILAPL ;BIT FOR APL MODE
ANDCAM T1,LDBISR(U) ;CLEAR APL MODE
>;END OF IFN FT2741&FTCAFE
TTYRL2: MOVE T1,[XWD TTYATC,ASSCON] ;IS TTY ATTACHED OR ASSIGNED?
TDNE T1,DEVMOD(F) ; ..
JRST TTYRS1 ;YES. KEEP DDB AROUND. RETURN.
; JRST TTYKIL ;NO. GO DISCARD DDB.
;ROUTINE TO CLEAR A TTY F AND MAKE IT AVAILABLE TO THE POOL
;CALL: MOVE F,ADDRESS OF DEVICE DATA BLOCK KNOWN TO BE THROUGH USE.
; PUSHJ P,TTYKIL
; ALWAYS RETURN HERE
;RESPECTS F & S, CLOBBERS T1
TTYKIL::SETZM DEVNAM(F) ;CLEAR PHYSICAL NAME
SETZM DEVLOG(F) ;CLEAR LOGICAL NAME
MOVSI T1,IOFST ;INITIAL STATE OF S WORD
MOVEM T1,DEVIOS(F) ;PLACE IN CORE STATUS WORD
PUSHJ P,CLRDVL## ;NO JOB OWNS IT ANY MORE.
PUSH P,U
HRRZ U,DDBLDB(F) ;GET LINK TO LINE DATA BLOCK
JUMPE U,TTYKL1 ;BYPASS IF NO LINK.
PUSHJ P,TTYSTC ;PUT LINE AT COMMAND LEVEL
PUSHJ P,TTYCPT ;CLEAR PAPER TAPE BITS
MOVSI T1,LPLCLR ;CLEAR PAGE BITS
ANDCAM T1,LDBPAG(U) ;SO XON AND XOFF ARE ECHOED PROPERLY
HLLZS LDBDDB(U) ;REMOVE LINK TO DEAD DDB
PUSHJ P,CLRIM1 ;MAKE SURE NOT IN IMAGE MODE
PUSH P,S ;IN CASE SOME CALLER SOMEWHERE CARES
MOVEI S,0 ;CLEAR ALL THOSE BITS IN LDBDCH
PUSHJ P,UUOLDB ;CLEAR OUT LDB
POP P,S ;THIS IS REALLY SUPERCAUTION
TTYKL1: HLLZS DDBLDB(F) ;REMOVE LINK FROM DDB TO LINE DATA BLOCK
MOVE T1,[XWD TTYUSE+TTYATC,ASSCON+ASSPRG]
ANDCAB T1,DEVMOD(F) ;LAST CLEAR THESE, MAKING DDB AVAILABLE
JRST UPOPJ## ;AND RETURN TO CALLER.
;SUBROUTINE CALLED ON RESET FROM UUOCON
TTYRES::MOVEI T1,JS.NTO
TDNN T1,JBTSTS##(J)
JRST TTYRS0
ANDCAM T1,JBTSTS##(J)
MOVEI F,SCNDDB
TTYRSA: LDB T1,PJOBN##
CAIE T1,(J)
JRST TTYRSB
SETZB T1,DEVSTS(F)
DPB T1,BYTCNT
TTYRSB: HLRZ F,DEVSER(F)
MOVE T1,DEVMOD(F)
TLNE T1,DVTTY
JRST TTYRSA
TTYRS0: HRRZ F,TTYTAB##(J) ;GET CONTROLLING DDB ADDRESS
JUMPE F,CPOPJ## ;REALLY HAS TO BE ONE
TTYRS1: MOVE S,[XWD IOSBKA,DLRSUP+FCS+D] ;GET BITS
; THE FOLLOWING CHECK FOR NOT LOGGED IN,
; RUNNING "LOGIN" IS TO AVOID BREAKING
; ANCIENT "FEATURE" OF NOECHO GETTING SET
; BY LOGIN COMMAND
MOVE T1,JBTSTS##(J) ;GET THIS STATUS
MOVE T2,JBTPRG##(J) ; AND THE PROGRAM
TLNN T1,JLOG ;IS HE NOT LOGGED IN?
CAME T2,[SIXBIT /LOGIN/] ; AND RUNNING LOGIN
IORI S,NOECHO ;NOT BOTH, WE CAN CLEAR NOECHO
ANDCAB S,DEVIOS(F) ;CLEAR THESE BITS ON RESET
HRRZ U,DDBLDB(F) ;LINK TO LDB
JUMPE U,CPOPJ## ;SKIP IT IF DETACHED
MOVEI T1,0 ;CLEAR THE AUTO
DPB T1,LDPACR ;CRLF COUNTER
PUSHJ P,CLRIM1 ;CLEAR IMAGE MODE
JRST UUOLDB ;AND MAKE LDB AGREE
COMTYI::PUSH P,T2 ;SAVE AC FOR OUTSIDE WORLD
SKIPN T3,TTCMCH ;IS ANYTHING THERE FROM BEFORE?
MOVEI T3,12 ;NO. ASSUME END OF LINE
PUSHJ P,SPCHEK ;YES. WAS IT A BREAK?
JFCL
TLNN T1,CHBRK ; ..
COMTI1: PUSHJ P,@COMTIA ;NO. GET ANOTHER CHARACTER (CCTYI OR ONCE)
ANDI T3,177 ;COMCON DOESNT WANT PARITY
PUSHJ P,SPCHEK ;CONVERT TO CONSISTENT BREAKS
JFCL ;ORDINARY CHARACTER
TLNE T1,CHCRET ;CARRIAGE RETURN?
JRST COMTI1 ;YES. GO GET LINEFEED INSTEAD
TLNE T1,CHBRK ;BREAK?
MOVEI T3,12 ;YES--MAKE INTO LINE FEED
TLNE T1,CHCNC ;IS THIS A CONTROL-C?
MOVEI T3,3 ;YES--CONTROL-C IS STRONGER THAN LF
MOVEM T3,TTCMCH ;STORE THIS CHARACTER
COMTIX: PJRST T2POPJ## ;RESTORE AC T2 AND RETURN
;PRESERVES T2 & T3
COMTYO::PUSH P,T2 ;SAVE AC
PUSH P,T3
ANDI T3,177 ;SAVE PUSHJ TO PEVEN8, DO IT HERE
SKIPL CHTABL(T3) ;IS CHAR ALREADY EVEN PARITY?
TRO T3,200 ;NO, MAKE IT SO
PUSHJ P,@COMTOA ;CALL CCTYO, CTYWAT, OR ONCE ROUTINE
; (CTYWAT DOES NOT USE INTERRUPT SYSTEM
; PRINTS ERROR INFO ON CTY ON MEM PARITY ERROR
; JUST BEFORE SYSTEM HALTS)
POP P,T3
PJRST T2POPJ## ;RESTORE T2 AND RETURN.
;SUBROUTINE TO SEND 1 CHAR, SENDING CONTROL CHARS AS ^X
;OTHERWISE, SAME AS COMTYO
USEARO::PUSHJ P,SPCHEK ;SPECIAL CHAR?
JRST COMTYO ;NO, FORGET IT
TLNN T1,CHUAE ;ECHO AS ^X?
JRST COMTYO ;NO, GO ECHO NORMALLY
PUSH P,T3 ;SAVE THE CHAR
MOVEI T3,336 ;GET AN ARROW
PUSHJ P,COMTYO ;SEND IT
POP P,T3 ;RESTORE CHAR
TRC T3,300 ;CONVERT TO LETTER
JRST COMTYO ;AND GO TYPE IT
;ROUTINE TO SWITCH TTY TO USER PROGRAM LEVEL AND START USER RUNNING
TTYUSW::TDZA S,S ;DON'T CLEAR WAIT BITS
TTYUSR::MOVE S,[XWD IOW,IOACT] ;CLEAR WAIT BITS
HRRZ F,LDBDDB(U) ;GET ATTACHED DDB IF ANY
JUMPE F,TTYUS1 ;JUMP IF NOT ATTACHED
ANDCAB S,DEVIOS(F) ; ..
PUSHJ P,UUOLDB ;MAKE LINE AND DEVIOS AGREE
TTYUS1: MOVE T1,LDBDCH(U) ;GET DEVICE BITS
TRNE T1,LDRPTY ;IS THIS A PTY?
PUSHJ P,PTMNMZ## ;YES. TELL CONTROLLER
MOVSI T1,LDLCOM ;PUT TTY IN USER MODE
ANDCAM T1,LDBDCH(U) ;MAY BE DETACHED, BUT WILL WAIT
; AT UUO LEVEL IF NEEDED
PJRST SETRUN## ;SET USER'S RUN BIT AND RETURN
;HERE AT COMPLETION OF A COMMAND
TTYCMR::PUSH P,T1 ;SAVE PREVIOUS LDPCMX
TRNN F,-1 ;ANY JOB?
PUSHJ P,TTYCPT ;NO. CLEAR PAPER-TAPE BITS
AOS T1,LINSAV##
CAIL T1,TTPLEN##
SETZM LINSAV##
HLL T2,0(U) ;GET COMMAND REQUEST BITS
POP P,T1 ;COMMAND JUST FINISHED
LDB T3,LDPCMX ;CURRENT
CAME T1,T3 ;CHANGED?
TLNN T2,LDBCMF ;FORCED
SKIPA ;NO CHANGE OR NOT FORCED
POPJ P, ;NEW FORCED-DO IT
MOVSI T1,LDLECS ;SET EAT-COMMAND-SYNC BIT
TLNN T2,LDBCMF ;(UNLESS FORCED COMMAND)
IORM T1,LDBDCH(U) ;IN LINE DATA BLOCK
MOVSI T1,LDBCMR+LDBCMF ;CLEAR COMMAND REQUEST BITS
ANDCAB T1,0(U) ;IN BASE WORD OF LDB
MOVE T1,LDBDCH(U) ;GET THE LINE CHARACTERISTICS
TLNN T1,LDLBKA+LDLIMI ;ARE WE BREAKING ON ALL CHARACTERS
; OR IN IMAGE MODE?
JRST TTCMR1 ;NO, CONTINUE ON
SKIPLE LDBTIC(U) ;YES, DO WE HAVE ANY CHARACTERS
; IN THE INPUT BUFFER?
PUSHJ P,RCVWAK ;YES, WAKE THE JOB
;NO...
TTCMR1::MOVE T1,0(U) ;GET THE LINE'S LDBDDB AND CONTINUE
TLNE T1,LDBCMK ;FORCED KJOB PENDING?
IFN FTMIC,< ;IF MIC
PJRST MICWAK ;YES - DO NOT CLEAR COMMAND BIT
PUSHJ P,CMDCLR ;CLEAR COMMAND BIT
PJRST MICWAK ;WAKE MIC UP IF NEC & RETURN TO COMCON
> ;END OF IF MIC
IFE FTMIC,< ;IF NOT MIC
POPJ P,0 ;YES--DO NOT CLEAR COMMAND BIT
PJRST CMDCLR ;CLEAR COMMAND BIT
> ;END OF IF NOT MIC
TTYSTC::HLL U,LDBDCH(U) ;SEE IF THIS LINE IS SLAVED
MOVSI T1,LDLCOM ;PREPARE TO SET BIT
TLNN U,LDLSLV ;SLAVED?
IFN FTMIC,< ;IF MIC
IORM T1,LDBDCH(U) ;NO. SET COMMAND BIT
PUSHJ P,MICWAK ;WAKE MIC IF NECESSARY
> ;END OF IF MIC
IFE FTMIC,< ;IF NOT MIC
IORB T1,LDBDCH(U) ;NO, SET COMMAND BIT
> ;END OF IF NOT MIC BIT
TRNE T1,LDRPTY ;PTY-DRIVEN LINE?
PUSHJ P,PTMNMD## ;YES. TELL CONTROLLER
TTYSTR::MOVE T1,LDBDCH(U) ;GET DEVICE BITS
TRNE T1,LDRPTY ;IS IT A PTY?
PUSHJ P,PTYPE## ;YES. WAKE THE PTY CONTROLLER
PUSHJ P,COMQ ;AT COMMAND LEVEL?
PJRST NOCTRO ;NO. JUST CLEAR ^O BIT
PUSHJ P,TYIEAT ;YES. CLEAR THE COMMAND IN CASE MORE
SKIPLE LDBBKC(U) ;ANY MORE COMMANDS?
PUSHJ P,COMSET ;MAYBE. SET BIT IF AT COM LEVEL
PJRST NOCTRO ;CLEAR OSU AND RETURN
SUBTTL SUBROUTINES FOR COMCON OR UUO LEVEL
;COMMON UUO LEVEL ROUTINES
;TYO7W IS USED TO TAKE A 7-BIT CHARACTER IN T3, ADD THE
; CORRECT PARITY, GO INTO I/O WAIT IF JOB DETACHED OR IF THE LINE'S
; OUTPUT BUFFER IS RATHER BIG, THEN PLACE THE CHARACTER IN OUTPUT
; STREAM, AND START OUTPUT IF NEEDED.
;TYO9W IS SAME, BUT ASSUMES PARITY AND NINTH BIT ARE AS DESIRED.
;TYO CHOOSES ONE OF THE ABOVE, DEPENDING ON MODE IN S
;CALL WITH DDB SET UP, CHARACTER IN CH.
;IF CALLED AT TYO, S MUST BE SET UP ALSO
TYO: TRNE S,I!PIMMOD ;IMAGE MODE USE OWN PARITY
JRST TYO9W
TYO7W: ANDI T3,177
SKIPL CHTABL(T3) ;EVEN ALREADY?
TRO T3,200 ;NO, MAKE IT SO
TYO9W: MOVE S,DEVIOS(F) ;GET DEVIOS
TRNE S,IODERR ;WAS ^C TYPED?
POPJ P, ;YES, EXIT
PUSHJ P,CKATTO ;WAIT FOR ATTACH, SET LINE.
MOVE T1,TTFREN## ;MAKE SURE THERE'S SOME CHARACTER SPACE LEFT
CAIGE T1,3 ;LEAVE 3 CHUNKS FOR SAFETY
JRST TYONFC ;NO, GO INTO I/O WAIT UNTIL SOME FREE
MOVE T1,LDBTOC(U) ;GET OUTPUT STREAM LENGTH
CAML T1,TIWRNN ;IS HE OVER QUOTA?
JRST TYOOBF ;YES. WAIT FOR IT TO EMPTY.
IFN FTMLOG,<
SKIPN LDBLOT(U) ;IS HE LOGGING
JRST TYO9M ;NO
ADD T1,LDBLOT(U)
HRRZS T1
CAIL T1,^D100
JRST MICLGX ;GO WAKE UP MIC
TYO9M:
> ;END OF FTMLOG CONDITIONAL
HLL U,LDBDCH(U) ;CHECK IF STILL WANT TO OUTPUT
SKIPL LDBOFL(U)
TLNE U,LDLOSU ; ..
POPJ P,0 ;NO. JUST RETURN DUE TO ^O
TYO9A: MOVEI T1,L2RORH ;OUTPUT RACE HAPPENED BIT
ANDCAM T1,LDBBY2(U) ;CLEAR IN LDB
MOVSI T1,LDLORS ;SET SYNC BIT FOR TSETBO TO SEE
IORM T1,LDBDCH(U) ;IN LINE DATA BLOCK
CONO PI,SCNOFF##
PUSHJ P,TTPTOC ;UPDATE BYTE POINTER, STORE CHARACTER
AOS LDBTOC(U) ;COUNT USED OUTPUT LENGTH
CONO PI,SCNON##
IFN FTMIC,< ;IF MIC
SKIPE T2,LDBMIC(U) ;MIC RUNNING FOR US?
PUSHJ P,MICPOS ;YES SET UP AND CHECK POSITION
> ;END OF IF MIC
MOVSI T1,LDLORS ;SET TO CLEAR SYNC BIT
CONO PI,PIOFF## ;WITH PI OFF
ANDCAM T1,LDBDCH(U) ; IN THE LDB
MOVEI T1,L2RORH ;SET TO CHECK FOR OUTPUT CLEAR
TDNE T1,LDBBY2(U) ;DID TSETBO GET CALLED?
JRST TSETO2 ;YES. GO FINISH IT UP.
CONO PI,PION## ;PI BACK ON
TOPOKE::MOVE T1,LDBDCH(U) ;SEE IF THIS IS A PTY-DRIVEN LINE
TRNE T1,LDRPTY ;OR REMOTE STATION TTY
POPJ P,0 ;YES. DON'T START ANY HARDWARE
MOVSI T1,LDLOIP ;SEE IF NEED TO START OUTPUT
CONO PI,PIOFF## ;DONT GET CONFUSED BY FINISHING LAST T3 HERE
TDNE T1,LDBDCH(U) ;IS OUTPUT GOING?
JRST TYO9W1 ;YES. DONT DO A DATAO.
MOVSI T1,LPLPOK ;ALREADY FORCING
TDNE T1,LDBPAG(U) ;AT SOME LEVEL?
JRST TYO9W1 ;YES. LET HIM DO IT
IORM T1,LDBPAG(U) ;WE ARE NOW!
CONO PI,PION## ;ALLOW INTERRUPTS
PUSH P,F ;SAVE F INCASE ATTACH HAS OCCURRED
; SINCE XMT INT ROUTINE WILL LOAD FROM LDB
PUSHJ P,XMTIN0 ;GO START TTY OUTPUT
POP P,F ;RESTORE DEVICE DATA BLOCK
MOVSI T1,LPLPOK ;ALL COUNTS UPDATED
ANDCAM T1,LDBPAG(U) ;LET NEXT FORCE WIN
POPJ P,0 ;RETURN FROM TYO ROUTINE
TYO9W1:
CONO PI,PION## ;REENABLE INTERRUPT SYSTEM
POPJ P,0 ;RETURN FROM TYO8W
TYOVRG: PUSHJ P,GETCHK ;GET A CHUNK FROM FREELIST
CONO PI,PIOFF##
MOVEM T2,LDBTOP(U) ;PUT IN TYPEOUT STRING ADDRESSES
MOVEM T2,LDBTOT(U)
JRST ONPOPJ## ;REENABLE INTERRUPTS AND RETURN
;HERE IF NO FREE CHUNKS
TYONFC: PUSH P,16 ;ACS USED BY SETSLP
PUSH P,17
PUSH P,T3
PUSH P,U
MOVEI T1,5 ;SLEEP FOR 5 SEC.
PUSHJ P,SLEEP## ; ..
POP P,U ;RESTORE AC(S
HRRZ F,LDBDDB(U)
POP P,T3
POP P,17
POP P,16
JRST TYO9W
IFN FTMLOG,<
MICLGX: PUSHJ P,MICWAK
> ;END OF FTMLOG CONDITIONAL
;HERE IF OUTPUT BUFFER FULL
TYOOBF: PUSHJ P,TOWAT1
JRST TYO9W
;SUBROUTINE TO SETUP AND RELOCATE A BYTE POINTER TO A USER'S BUFFER
;CALLING SEQUENCE:
; MOVE S,DEVIOS(F)
; HRRZ P1,RELATIVE ADDRESS OF BUFFER
; PUSHJ P,SRLPTR
;RETURN HERE - P1=USER VIRTUAL ADDRESS FOR XCT PAGED IF KI10
;OR EXEC VIRTUAL ADDRESS IF KA10
SRLPTR: ADD P1,[XWD 010700+R,1] ;ASSUME POINTER AND KA10 RELOCATION
TRNE S,I ;CHECK FOR IMAGE MODE
HRLI P1,004400+R ;36 BIT POINTER AND KA10 RELOCATION
IFN FTKI10!FTKL10,<
RLCPTR:: ;RELOCATION IS DONE IF KA10
TLZ P1,R ;KI10 - CHANGE TO USER VIRTUAL ADDRESS
>
POPJ P, ;RETURN
;SUBROUTINE FOR COMMAND LEVEL OUTPUT
CCTYO:: JUMPE U,CPOPJ## ;U MUST BE SET UP
MOVE T1,LDBTOC(U) ;GET COUNT
SUBI T1,^D200
SKIPLE T2,TTFREN## ;SPACE IN STRINGS?
CAML T1,TIWRNN ;YES. SPACE IN THIS GUY'S AREA?
POPJ P,0 ;NO. QUIT.
CAIL T2,3
SKIPN TTFREE## ;IS THERE A FREE LIST?
POPJ P, ;NO--PUNT
ANDI T3,177 ;FORCE EVEN PARITY SINCE CCTYO NEVER DOES IMAGE
SKIPL CHTABL(T3) ; AND TRMOP CALLERS FORGOT TO ADD PARITY
TRO T3,200
JRST TYO9A ;YES. GO TYPE IT.
$LOW ;MUST BE IN THE LOW SEGMENT FOR ONCE-ONLY
;SUBROUTINE TO PRINT ON CTY IN EMERGENCY OR ONCE-ONLY
; WHEN INTERRUPT SYSTEM CANNOT BE USED OR TRUSTED
;CALL: MOVEI T1,ADR OF ASCIZ MESSAGE
; PUSHJ P,CTYTYP
; ALWAYS RETURN
CTYTYP::HRLI T1,440700 ;FORM BYTE POINTER
CTYTYL: ILDB T3,T1 ;GET NEXT CHARACTER
JUMPE T3,LCPOPJ ;END OF MESSAGE?
;(CPOPJ IS IN HISEG, SO DONT USE IT)
PUSHJ P,CTYWAT ;NO, PRINT IT ON CTY AND WAIT
JRST CTYTYL ;GO GET NEXT CHAR.
;SUBROUTINE FOR ERROR MESSAGE TO CTY DURING PARITY ERROR STOP
;CALL: MOVEI T3,CHARACTER
; PUSHJ P,CTYWAT
; RETURN AFTER CHARACTER HAS BEEN TYPED
;NOTE: DOES NOT USE INTERRUPT SYSTEM SO MESSAGE WILL GET OUT BEFORE HALT
;THIS SUB CALLED BY COMTYO WHEN COMTOA PATCHED
CTYWAT::PUSH P,T1
PUSHJ P,CTYPAR ;COMPUTE PARITY WITH LOSEG ROUTINE
IFN FTKA10!FTKI10,<
CONSZ CTY,20 ;WAIT FOR CTY TO BE IDLE
JRST .-1 ;NO, SO NOT GARBLE ON GOING OUTPUT
DATAO CTY,T3 ;YES, SEND OUT CHAR
PUSHJ P,OPRFIL
CONSZ CTY,20 ;WAIT FOR CTY TO BE IDLE
JRST .-1 ;NO, OTHERWISE HALT OR RESET WILL CLOBBER LAST CHAR
JRST OPRFI2 ;YES, OK TO RETURN
> ;END FTKA10!FTKI10
IFN FTKL10,<
IFN FTMS,<
SKPCPU (0) ;IF THIS IS CPU1,
JRST CTYWT1 ;OUTPUT TO CPU1 (T1 STILL ON STACK)
>;END IFN FTMS
PUSHJ P,SPCTYO## ;SEND CHAR OVER
PUSHJ P,SPCWTO## ;WAIT FOR OUTPUT TO COMPLETE
JRST .-1
JRST OPRFI2 ;RESTORE T1
;AND RETURN
;STILL IN FTKL10 CONDITIONAL
IFN FTMS&FTKL10,<
;SYMBOLS FROM DTEPRM.MAC FOR SLAVE USE ONLY
DT.MTO==10B27 ;OUTPUT CHARACTER SECONDARY PROTOCOL FUNCTION
TO11DB==1B22 ;RING 11 DOORBELL
DTE==200
CTYWT1: MOVEI T3,DT.MTO(T3)
MOVEM T3,DT1CMD## ;INTO CPU1 AREA
CONO DTE,TO11DB
ANDI T3,377 ;JUST CHAR AGAIN
SKIPN DT1MTD##
JRST .-1
SETZM DT1MTD## ;WAIT UNTIL DONE, THEN CLEAR
JRST OPRFI2 ;RESTORE T1 NOW
;RETURN
PURGE TO11DB,DT.MTO ;MAKE SURE THESE ARE NOT USED AGAIN
PURGE DTE
>;END IFN FTMS
>;END IFN FTKL10
;ROUTINE RESIDING IN LOSEG TO COMPUTE PARITY.
; USED ONLY FOR EMERGENCY CTY OUTPUT ROUTINES.
; USES T1
CTYPAR: MOVEI T1,(T3)
LSH T1,-4 ;FOLD INTO LOW 4 BITS
XORI T1,(T3)
TRCE T1,14 ;CHECK BITS 32 AND 33
TRNN T1,14
TRC T3,200 ;IF EVEN PARITY COMPLEMENT RESULTS
TRCE T1,3
TRNN T1,3
TRC T3,200 ;IF EVEN PARITY COMPLEMENT RESULTS
POPJ P, ;RETURN
$HIGH ;BACK TO THE HIGH SEGMENT
;SUBROUTINE TO CLEAR PAPER TAPE INPUT BITS, RETURNS LDBDCH IN T1
TTYCPT:: MOVSI T1,L2LTAP ;CLEAR TTY TAPE COMMAND BIT
ANDCAM T1,LDBBY2(U) ;IN BY2
MOVSI T1,LDLXON ;CLEAR XON IN EFFECT
ANDCAB T1,LDBDCH(U) ;AND RETURN NEW STATUS
POPJ P, ;RETURN
$LOW ;MUST BE IN THE LOW SEG FOR EMERGENCIES
;SUBROUTINE TO ADD A DELAY FOR SLOW CTY'S
;CALL WITH:
; MOVEI T3,CHAR
; PUSHJ P,OPRFIL
;USED ONLY WITH PI SYSTEM OFF
OPRFIL::ANDI T3,177 ;ONLY CHAR BITS
PUSH P,T1 ;SAVE T1
MOVEI T1,0 ;ASSUME NO FILLERS
CAIN T3,12 ;LF GETS
MOVEI T1,CTYDLF## ;8 TICKS
CAIN T3,15 ;CR GETS
MOVEI T1,CTYDCR## ;18 TICKS
JUMPE T1,OPRFI2 ;RETURN
ADDM T1,TIME## ;UPDATE TIME
IFN FTKA10!FTKI10,<
OPRFI1: CONSO APR,XP.CLK ;DID CLOCK TICK?
JRST OPRFI1 ;NO -- WAIT FOR IT
CONO APR,XP.CCF ;CLEAR CLOCK FLAG
>;END IFN FTKA10!FTKI10
IFN FTKL10,<
OPRFI1: CONSO TIM,TI.ITD ;CLOCK "TICK" ?
JRST OPRFI1 ;NOT YET
CONO TIM,@ONCKLT## ;YES, CLEAR AND SET FOR ANOTHER "TICK"
>;END IFN FTKL10
SOJG T1,OPRFI1 ;LOOP FOR WHOLE TIME
OPRFI2: POP P,T1 ;--
LCPOPJ: POPJ P, ;LOCAL CPOPJ FOR USE WHEN HISEG ISN'T MAPPED
$HIGH ;BACK TO THE HIGH SEGMENT
;ROUTINE TO FIND A FREE TTY DEVICE DATA BLOCK
;CALL FROM CLOCK LEVEL TO DO AN ATTACH ON A NEW JOB, OR
;FROM UUO LEVEL ON AN INIT OF A NEW LINE.
;CALL: NO ARGUMENTS
; PUSHJ P,DDBSRC
; ERROR RETURN ;NONE AVAILABLE. F=0. T1 CLOBBERED
; OK RETURN ;ADDRESS IN F, TTYUSE SET IN DEVMOD
; ;RESPECTS J,U,T2.
; ;IF YOU DECIDE NOT TO USE DDB, YOU BETTER
; ;FREE IT UP AGAIN.
DDBSRC: PUSHJ P,DDBSR0 ;TRY TO GET A DDB
SKIPA ;LOST -- TRY AGAIN
PJRST CPOPJ1## ;WE WON
DDBSR0:
MOVEI F,TTYLST ;START OF THE TTY DDB'S
DDBSRL: MOVSI T1,TTYUSE ;FLAG THAT A DDB ISN'T FREE
CONO PI,PIOFF## ;MAKE SURE NO CONFLICT HERE
TDNN T1,DEVMOD(F) ;IS THIS DDB FREE?
JRST DDBSR1 ;YES. GO GRAB IT.
CONO PI,PION## ;NO. REENABLE PI SYSTEM
PUSHJ P,TTYKLQ ;KILL OFF IF IDLE
HLRZ F,DEVSER(F) ;LINK DOWN THE DDB CHAIN
MOVE T1,DEVMOD(F) ;MAKE SURE STILL A TTY DDB
TLNE T1,DVTTY ;IS IT?
JUMPN F,DDBSRL ;YES. (UNLESS END OF CHAIN)
MOVEI F,0 ;NO MORE TTY DDB'S. WE LOSE.
POPJ P,0 ;RETURN NON-SKIP, WITH 0 IN DDB
DDBSR1: IORM T1,DEVMOD(F) ;SET BIT SO WE HAVE THE DDB
CONO PI,PION## ;NOW PI'S CAN HAPPEN AGAIN
PUSHJ P,CLRDVL## ;CLEAR JOB NO. IN CASE OF JUNK
MOVE T1,[XWD TTYATC,ASSCON+ASSPRG] ;LIKEWISE MODE BITS
ANDCAM T1,DEVMOD(F) ; ..
SETZM DEVLOG(F) ;AND LOGICAL NAME
MOVSI T1,IOFST ;AND INITIAL S WORD
MOVEM T1,DEVIOS(F) ;WHICH SHOULD LEAVE IT PRETTY CLEAN
JRST CPOPJ1## ;SKIP RETURN. WE HAVE A DDB.
;ROUTINE TO FIND A TTY DDB WHICH IS ATTACHED TO, I.E.
;CONTROLLING, A PARTICULAR JOB NUMBER.
;CALLED AT COMMAND LEVEL BY ATTACH COMMAND, AND AT UUO LEVEL
;BY REFERENCES TO DEVICE "TTY" OR TTCALLS, ETC.
;CALL: MOVE J,JOB NUMBER DESIRED
; PUSHJ P,TTYSRC
; ERROR RETURN. ;NOT FOUND. AC'S U,F,S NOT GUARANTEED
; NORMAL RETURN ;U, S AND F SET UP. NOTE THAT THIS DOES
; ;!NOT! IMPLY THAT ANYONE IS ATTACHED. THAT IS,
; ; U MAY CONTAIN A ZERO
; ;CLOBBERS T1
TTYSRC::JUMPLE J,CPOPJ## ;NOBODY CONTROLS JOB ZERO. YOU ARE CONFUSED.
HRRZ F,TTYTAB##(J) ;GET CONTROLLING TTY DDB ADDRESS
JUMPE F,CPOPJ## ;RETURN IF NONE
MOVE T1,DEVMOD(F) ;GET DEVICE BITS FROM DDB
TLNN T1,TTYATC ;IS THIS THE CONTROLLING TTY?
POPJ P,0 ;NO. IT WAS A SLAVE OR SOMETHING.
HRRZ U,DDBLDB(F) ;YES. GET THE LDB LINK (MAY BE 0)
MOVE S,DEVIOS(F) ;AND I/O STATUS WORD
JRST CPOPJ1## ;GIVE SUCCESS RETURN.
;ROUTINE CALLED WHEN DEVSRC CAN'T FIND DEVICE XXX (IN T1), AND
; IT WANTS TO SEE IF IT IS A PHYSICAL TTY. GETDDB CHECKS NAME,
; AND IF IT SHOULD BE A TTY, LOOKS FOR ITS DDB, OR MAKES ONE.
;CALL: MOVE J,JOBNUMBER
; MOVE T1,SIXBIT DEVICE NAME, ALLEGEDLY A PHYSICAL TTY NAME
; PUSHJ P,GETDDB
; ERROR RETURN, NOT A TTY OR THERE ARE NO DDB'S AVAILABLE.
; OK RETURN. IT IS A TTY, AND F AND U ARE NOW SET TO IT.
;RESPECTS T1 ON THE OK RETURN ONLY
;CALLED FROM DEVSRC, SO MAY BE AT UUO OR CLOCK LEVEL
GETDDB::PUSHJ P,TTYPHY ;LOOK FOR THIS PHYSICAL NAME
POPJ P,0 ;IT ISNT A TTY
JUMPN F,GETDB5 ;IS THERE A DDB ALREADY?
;IF SO, SOMEONE HAS CALLED GETDDB WHO
; COULD HAVE CALLED DEVSRC.
PUSHJ P,DDBSRC ;NO. NEED A NEW DDB. TRY TO GET ONE.
POPJ P,0 ;NONE AVAILABLE. FAIL RETURN
HRRM F,LDBDDB(U) ;SUCCESS. SET LINKS TO AND FROM DDB
HRRM U,DDBLDB(F) ; AND LINE DATA BLOCK.
PUSHJ P,SCNNAM ;FILL IN REAL NAME AND PUNIT
IFN FTNET,<
PUSHJ P,SETSTA ;PUT STA # IN DDB
>
GETDB5: MOVE T1,DEVNAM(F) ;RESTORE REAL NAME TO T1
JRST CPOPJ1## ;AND GIVE SUCCESSFUL RETURN FROM GETDDB
IFN FTTALK!FT5UUO,<
;SUBROUTINE TO PUT PHYSICAL NAME INTO T2 FOR U WHOSE LDB IS IN U
;EVEN THOUGH THERE MAY BE NOTHING IN F OR LDBDDB
TTYNAM::PUSH P,[SIXBIT /CTY/] ;SEE IF CTY
LDB T1,LDPLNO ;GET LINE NUMBER
CAIN T1,TCONLN## ; ..
JRST T2POPJ## ;YES.
MOVSI T3,(SIXBIT /TTY/) ;NO. CHANGE TO TTY
MOVEM T3,0(P) ;ON STACK
MOVEI T3,0(P) ;PREPARE ARG FOR SCNNMR
HRLI T3,220600 ;POINT 6,0,17
PUSHJ P,SCNNMR ;AND CALL SAME ROUTINE AS SCNNAM DOES
PJRST T2POPJ## ;PUT ANSWER IN T2
;AND RETURN FROM TTYNAM
> ;END CONDITIONAL ON FTTALK
;SUBROUTINE TO FIND LDB FOR A PHYSICAL NAME, IF ITS A TTY
;AND LOAD F WITH LINKED DATA BLOCK, IF ANY, BUT DONT MAKE ONE IF NONE YET
;SKIP RETURN IF ITS A TTY
TTYPHX: PUSHJ P,TSTOPR## ;SEE IF OPR AND FUDGE T1
PUSHJ P,SAVE2##
PUSH P,T1 ;SAVE NAME
MOVEI P1,TCONLN## ;TRY CTY FIRST. GET ITS LINE NUMBER
CAMN T1,[SIXBIT /CTY/] ;IS CTY WANTED?
JRST TTYPH1 ;YES. GO USE TCONLN
HLLZ P1,T1 ;GET FIRST THREE CHARACTERS
CAMN P1,[SIXBIT /TTY/] ;ARE THEY TTY?
TRNN T1,770000 ;AND ALSO IS FOURTH CHAR NON-BLANK?
PJRST TPOPJ## ;NO. NOT A LEGAL NAME.
MOVE P2,[POINT 6,0(P),17] ;POINTER TO READ CHARS
MOVEI P1,0 ;INITIALIZE LINE TO 0
TTYPH4: ILDB T1,P2 ;GET A SIXBIT CHARACTER FROM NAME
JUMPE T1,TTYPH2 ;JUMP IF END OF NAME.
TRC T1,"0"-40 ;CONVERT SIXBIT TO BINARY
CAILE T1,7 ;IS IT AN OCTAL DIGIT?
JRST TPOPJ## ;NO. BAD CHAR IN NAME
ASH P1,3 ;MULTIPLY BY 8
ADDI P1,0(T1) ;ADD IN THIS DIGIT
TLNE P2,770000 ;CHECK FOR MORE DIGITS
JRST TTYPH4 ;LOOP FOR MORE DIGITS
TTYPH2:
CAMLE P1,P3 ;IS IT A LEGAL HARDWARE LINE #?
JRST TPOPJ## ;NO. TOO BAD.
TTYPH1: HRRZ U,LINTAB##(P1) ;GET LINE DATA BLOCK ADDRESS
HRRZ F,LDBDDB(U) ;GET ATTACHED DDB, IF ANY.
JRST TPOPJ1## ;GOOD RETURN
TTYPHY::PUSH P,P3 ;SET UP FOR PHYSICAL ONLY
MOVEI P3,TCONLN##
TTYPHZ: PUSHJ P,TTYPHX ;CALL COMMON SUBROUTINE
SOS -1(P) ;REMEMBER NON-SKIP RETURN
POP P,P3 ;BY PROPAGATING IT
JRST CPOPJ1##
TTYALL::PUSH P,P3 ;TRY ALLL-PHYSICAL & VIRTUAL
MOVEI P3,TTPLEN##
JRST TTYPHZ
;SUBROUTINE TO FIND TTY FOR A JOB IN J (TTYFND) OR FOR
; CURRENT JOB (TTYFNU)
;RETURN WITH F AND U SET UP.
;GOES TO ERROR IF NO TTYDDB FOR THE JOB.
TTYFNU::MOVE J,JOB## ;GET CURRENT UUO LEVEL JOB NUMBER
TTYFND::PUSHJ P,TTYSRC ;FIND THE JOB'S TTY DDB, ALSO U AND S
STOPCD CPOPJ##,DEBUG,NDJ, ;++NO DDB FOR JOB
TTYFNX: POPJ P,0 ;SUCCESS. RETURN.
;SUBROUTINE TTYFUW (TELETYPE FIND FOR CURRENT USER AND WAIT), TO
;FIND CURRENT USER'S TTY AND WAIT FOR IT TO COME OUT OF OUTPUT
;WAIT, AND BE ATTACHED.
;SUBROUTINE TOWAIT, TO WAIT FOR TYPEOUT ACTIVITY TO (NEARLY) COMPLETE,
;IF NECESSARY.
TTYFUW::PUSHJ P,TTYFNU ;FIND USER'S TTY
PUSHJ P,CKATTO ;CHECK THAT IT'S ATTACH. WAIT IF NOT.
IFN FTMIC,< ;IF MIC
MOVE T1,LDBMIC(U)
TLNE T1,LDL.RS!LDL.SY
POPJ P,0 ;IF HE WANTS RESPONSE STUFF DO NOT TO
> ;END OF IF MIC
;ROUTINE TO WAIT FOR NEARLY EMPTY OUTPUT BUFFER. CALL ONLY AT UUO LEVEL
TOWAIT: MOVE S,[XWD TTYOUW+IO+IOW,IOACT] ;SET ACTIVE & WAITING FIRST TO AVOID COMPLETION
IORM S,DEVIOS(F) ;BETWEEN TEST FOR COMPLETION & IOACT SET
MOVE T1,LDBTOC(U) ;GET COUNT OF TYPE-OUT CHARACTERS WAITING.
CAIL T1,10 ;OVER 7?
JRST TOWAT2 ;YES. HAVE TO WAIT
ANDCAB S,DEVIOS(F) ;NO. NOT WAITING, SO TURN OFF BITS
POPJ P, ;& RETURN
TOWAT1: MOVE S,[XWD TTYOUW+IO,IOACT] ;FLAG OUTPUT WAIT ACTIVITY
TOWAT2: IORB S,DEVIOS(F) ;IN THE DEVICE DATA BLOCK
PUSHJ P,PTSTRT ;WAKE UP SUBJOB, IF ANY
PUSHJ P,WSYNCS ;WAIT FOR IO TO COMPLETE
HRRZ U,DDBLDB(F) ;SET UP LDB IN CASE DETACH/ATTACHAPPENED WHILE WAITING
JUMPE U,TTYFUW ;MAKE SURE STILL ATTACHED
POPJ P, ;AND RETURN
WSYNCS: PJRST WSYNC## ;WAIT AND RETURN WHEN IO DONE
;SUBROUTINE TTYERP TO FIND TTY DDB FOR A MONITOR ERROR MESSAGE.
;CALL WITH J SET TO JOB NUMBER TO BE TYPED AT.
;IF JOB IS ZERO, OR IF DESIRED JOB IS DETACHED, TTYERP RETURNS
;WITH U SET TO OPERATOR'S CONSOLE, AND F SET FROM IT,
;BUT OF COURSE THAT DDB MAY BE ZERO, SINCE MAY BE NO JOB AT OPR.
TTYERP::PUSHJ P,TTYSRC ;FIND THE TTY DDB IF POSSIBLE
JRST TTYERO ;NONE THERE. MAYBE JOB 0. GO FIND OPR
IFE FTOPRERR,<
JUMPN U,CPOPJ## ;IF U NON-ZERO, HAVE FOUND WHAT WE WANT
>
IFN FTOPRERR,<
JUMPN U,CPOPJ1## ;SKIP RETURN TO SIGNAL LDB FOUND
>
TTYERO: SKIPN U,OPRLDB## ;GET OPERATOR LINE FROM ONCE
STOPCD CPOPJ##,DEBUG,NOT, ;++NO OPR TTY
HRRZ F,LDBDDB(U) ;GET DDB ADR, IF ANY.
TTYERX: POPJ P,0 ;AND RETURN FROM TTYERP
;SUBROUTINES TO SET UP LINE AND MAKE SURE ATTACHED.
;CALL WITH DDB SET UP, FROM UUO LEVEL ONLY.
;RETURN WHEN ATTACHED AND AT USER LEVEL, WITH LINE SET UP.
;ONE ROUTINE FOR INPUT, ONE FOR OUTPUT, ONE FOR OUTPUT AND USER LEVEL
CKATTI: IFN FTRSP,< ;RESPONSE DATA?
PUSHJ P,RSPTIR## ;RECORD RESPONSE SATISFIED BY TTY INPUT UUO
>
CKATT0: MOVSI S,IO ;INDICATE INPUT
ANDCAB S,DEVIOS(F) ;SET UP STATUS WORD
HRRZ U,DDBLDB(F) ;GET LINE BLOCK ADDR
JUMPN U,CKATI1 ;IF THERE, GO ON
CKATIW: MOVSI S,IO+TTYOUW ;MUST WAIT FOR ATTACH
ANDCAM S,DEVIOS(F) ;CLEAR DIRECTION BIT
MOVEI S,IOACT ;AND SET WAIT BIT FOR INPUT
IORB S,DEVIOS(F) ; ..
PUSHJ P,WSYNCS ;WAIT FOR ATTACH
JRST CKATT0 ;GET LINE SET UP AND RETURN.
CKATI1: MOVE T1,DEVMOD(F) ;SEE IF TTY IS CONTROLLING JOB.
TLNE T1,TTYATC
JRST CKATI2 ;YES.
MOVSI T1,LDLCOM ;NO. MAKE IT BE
ANDCAM T1,LDBDCH(U) ;AT USER LEVEL
CKATI2: HLL U,LDBDCH(U) ;GET DEVICE BITS
TLNE U,LDLCOM ;AT COMMAND LEVEL?
JRST CKATIW ;YES. CAN'T DO INPUT.
PUSHJ P,TYIEAT ;NO. SKIP ANY COMMANDS
PJRST UUOLDB ;AND GO ADJUST LINE BITS.
CKATOU: PUSHJ P,CKATTO ;FIRST MAKE SURE A LINE ATTACHED TO DDB
TLNN U,LDLCOM ;IS LINE AT COMMAND LEVEL?
POPJ P,0 ;NO. USER LEVEL. RETURN.
MOVE T1,DEVMOD(F) ;COMMAND LEVEL. SEE IF CONTROLLER OR I/O DEVICE
TLNN T1,TTYATC ;..
POPJ P,0 ;I/O DEVICE. LET IT THROUGH.
PUSHJ P,TOWAT1 ;CONTROLLER. WAIT SO DON'T CLOBBER COMMANDS
JRST CKATOU ;THEN TRY AGAIN FOR USER LEVEL
CKATTO: MOVSI S,IO ;INDICATE OUTPUT
IORB S,DEVIOS(F) ;SET UP STATUS WORD
HRRZ U,DDBLDB(F) ;GET LINE ADDR IF ANY
JUMPN U,CKATO1 ;IF HAVE ONE, SEE IF TOP LEVEL
CKATOW: PUSHJ P,TOWAT1 ;WAIT FOR OUTPUT DONE. (WHICH
; IS FORCED ON ATTACH)
JRST CKATTO ;AND SET UP LINE, TO RETURN.
CKATO1: HLL U,LDBDCH(U) ;GET LINE DESCRIPTOR BITS
; PJRST UUOLDB ;FALL INTO UUOLDB
UUOLDB:
MOVEI T1,0 ;MAKE LDB AGREE WITH S
MOVE T2,LDBDCH(U) ;SAVE OLS STATUS
TRNE S,DLRSUP ;COPY THESE BITS TO THEIR
TLO T1,LDLDLR ; CORRESPONDING LINE BITS
TRNE S,FCS ; ..
TLO T1,LDLFCS
TRNN S,PIMMOD ;TURN OFF REMOTE ECHO IF PIM
;(IRRELEVANT ON NON-REMOTE LINES)
TRNE S,NOECHO
TLO T1,LDLNEC
TLNE S,IOSBKA ;SINGLE CHARACTER MODE?
TLO T1,LDLBKA ;YES. SET THAT BIT
IORM T1,LDBDCH(U) ;SET THOSE NEEDING SETTING
TLC T1,LDLNEC+LDLFCS+LDLDLR+LDLBKA
ANDCAM T1,LDBDCH(U) ;AND CLEAR THE OTHERS
IFN FTNET,<
MOVEI T1,LDRREM ;IS THIS A NETWORK TTY?
CAME T2,LDBDCH(U) ;CALL ISR IF STATUS CHANGED
TDNN T1,LDBDCH(U)
POPJ P, ;NO, DON'T TAKE THE TIME TO CALL ISR
PUSH P,T3 ;MOST OF SCNSER DOESN'T THINK OF THIS AS TEMPORARY
MOVEI T1,ISRCHP
PUSHJ P,@LDBISR(U) ;TELL ISR THAT CHARACTERISTICS MAY HAVE CHANGED
POP P,T3
>
POPJ P,
;HERE FROM UUOCON WHEN A TTY HAS BEEN INITED.
TTYOPN::HRRZ U,DDBLDB(F) ;GET LDB ADDRESS
JUMPE U,TPOPJ1## ;FORGET IT IF DETACHED
MOVSI T2,LDLCOM ;GET COMMAND LEVEL BIT
MOVSI T1,TTYATC ;IS TTY CONTROLLING THE JOB?
TDNN T1,DEVMOD(F) ;OR IS IT AN I/O DEVICE?
ANDCAM T2,LDBDCH(U) ;I/O PUT IT AT USER LEVEL
PUSHJ P,UUOLDB ;SETUP THE LDB FROM S
JRST TPOPJ1## ;AND RETURN
;SUBROUTINE TIWAIT TO WAIT FOR SOME INPUT, AND SEND XON IF NEEDED.
IFN FTMIC,< ;IF MIC
TIWAIT: PUSHJ P,MICWAK ;WAKE MIC IF NECESSARY AND SET UP T1 WITH LDBDCH
TRNE T1,LDRPTY ;IS THIS LINE PTY-DRIVEN?
> ;END OF IF MIC
IFE FTMIC,< ;IF NOT MIC
TIWAIT: MOVEI T1,LDRPTY ;IS THIS LINE PTY-DRIVEN?
TDNE T1,LDBDCH(U) ;CHECK IN THE LDB CHARACTERISTICS
> ;END OF IF NOT MIC
PUSHJ P,PTYOW## ;YES. GO MARK THIS WAIT.
IFN FTCAFE,< IFN FT2741!FTNET,< ;IF WE SUPPORT 2741'S ON THE DC76
PUSHJ P,UNLKBD ;UNLOCK KEYBOARD
> ;END FT2741
> ;END FTCAFE
MOVSI S,IO+TTYOUW ;MARK DIRECTION AS INPUT.
ANDCAM S,DEVIOS(F) ;CLEAR IN CORE
MOVE S,DEVIOS(F)
MOVEI T1,IMGTIM ;TIMEOUT FOR IMAGE MODE
TRNE S,I ;TTY IN IMAGE MODE?
DPB T1,LDPTIM ;YES. STORE TIMEOUT TIME
PUSHJ P,CHKXON ;SEND X-ON IF NEEDED
JRST WSYNCS ;WAIT FOR INPUT
;SUBROUTINE TWAITL TO WAIT FOR AN INPUT LINE
TWAITL: PUSHJ P,CKATTI ;FIRST WAIT FOR ATTACH. SET DDB AND LINE
PUSHJ P,TTLCHK ;CHECK FOR A LINE BEING PRESENT
JRST TWATLK ;BE SURE
POPJ P, ;LINE PRESENT, RETURN
TWATL1: PUSHJ P,TIWAIT ;NO. GO WAIT FOR ONE.
TRNE S,IODERR ;GOT A ^C?
POPJ P, ;YES, LINE PRESENT
JRST TWAITL ;MAKE SURE DID'T DETACH DURING WAIT
;SUBROUTINE TO WAIT FOR SINGLE CHARACTER INPUT
TWAITC: PUSHJ P,CKATTI ;MAKE SURE ATTACHED
PUSHJ P,TTCCHK ;CHECK FOR A CHARACTER PRESENT
SKIPA ;NONE PRESENT, GO WAIT
POPJ P,0 ;YES. RETURN
MOVE S,[XWD IOW,IOACT] ;SET BOTH ON TO AVOID RACE WITH COMPLETION
IORB S,DEVIOS(F) ;SO NOT GO INTO TI WITH SOMETHING THERE
PUSHJ P,TIWAIT ;NO. GO WAIT FOR ONE
TRNE S,IODERR ;GOT A ^C?
POPJ P, ;YES, THAT'S ENOUGH
JRST TWAITC ;MAKE SURE ONE THERE IN CASE OF ^C
TWATLK: MOVE S,[XWD IOW,IOACT] ;FLAG ACTIVE AND WAITING SO
IORB S,DEVIOS(F) ;INTERRUPT WILL NOT FIND HIM ACTIVE
PUSHJ P,TTLCHK ;BUT NOT WAITING. THEN LOOK AGAIN
JRST TWATL1 ;NOTHING ARRIVED SINCE LAST TEST
MOVE S,[XWD IOW,IOACT] ;SOMETHING DID SNEAK IN!
ANDCAB S,DEVIOS(F) ;SO FORGET ABOUT WAITING
POPJ P,
;SUBROUTINE TO CHECK IF A LINE HAS BEEN INPUT
;THIS ROUTINE ALSO PUTS THE TTY INTO LINE MODE
;CALL: PUSHJ P,TTLCHK ;WITH F AND U SET UP
; RETURN HERE IF NO LINE PRESENT
; RETURN HERE IF LINE PRESENT
TTLCHK::MOVSI S,IOSBKA ;CLEAR ALL-CHARACTERS BIT IN S
TRNE F,-1 ;IF THERE IS A DDBF
ANDCAB S,DEVIOS(F) ; . .
TTLCK1: MOVSI T1,LDLBKA ;CLEAR BREAK ON ALL CHARACTERS BIT
ANDCAM T1,LDBDCH(U) ;IN LINE DATA BLOCK
TTLCK2: LDB T1,PIOMOD## ;GET IO MOD
CAIE T1,PIMMOD ;SKIP IF PIM MODE
CAIN T1,I ;IMAGE MODE? (NO BREAKS)
SKIPG LDBTIC(U) ;YES, BREAK IF ANYTHING
SKIPLE LDBBKC(U) ;IS THERE A LINE ALREADY
JRST CPOPJ1## ;YES, RETURN
MOVE T1,LDBTIC(U) ;GET INPUT CHAR COUNT
CAIL T1,^D70 ;UP TO WARNING POINT?
JRST CPOPJ1## ;YES. SKIP, LINE AVAILABLE.
TLNE U,LDLIMI ;NO. IMAGE INPUT STATE?
TLNN S,FRCEND ;YES. ALSO TIMED OUT?
POPJ P,0 ;NO. NO LINE READY.
JRST CPOPJ1## ;YES. LINE READY.
;SUBROUTINE TO CHECK IF A CHARACTER HAS BEEN TYPED
;THIS ROUTINE PUTS THE TTY INTO CHARACTER MODE
;CALL: PUSHJ P,TTCCHK ;WITH F AND U SET UP
; RETURN HERE IF NO CHARACTER
; RETURN HERE IF CHARACTER PRESENT
TTCCHK: MOVSI S,IOSBKA ;SET CHARACTER BY CHAR BIT
IORB S,DEVIOS(F) ;IN DEVICE DATA BLOCK
MOVSI T1,LDLBKA ;SET "BREAK ON ALL CHARACTERS" BIT
IORM T1,LDBDCH(U) ;IN LINE DATA BLOCK
SKIPLE LDBTIC(U) ;IS THERE A CHARACTER ALREADY?
AOS (P) ;YES, SKIP RETURN
POPJ P, ;NO, NON-SKIP RETURN
;ROUTINE TO CHECK IF AN XOFF HAS BEEN SENT OUT
;AND IF SO, TO SEND AN XON.
;CALLED BY:
; PUSHJ P,CHKXON
; RETURN HERE ALWAYS (CLOBBERS T1,T3)
CHKXON: MOVSI T1,LPLXOF ;IS PAGE MODE ENABLED?
TDNN T1,LDBPAG(U) ;GUARANTEE XON IF TALKING TO
;ANOTHER COMPUTER
POPJ P, ;XON IS NOT NEEDED
CHKXN1: MOVEI T1,LDRPTY ;XON NOT APPROPRIATE IF
TDNE T1,LDBDCH(U) ;THIS IS A PTY
POPJ P, ;PTY! JUST RETURN
MOVE T1,LDBTIC(U) ;GET # OF INPUT CHARS
ADD T1,LDBECC(U) ;PLUS THOSE TO BE ECHOED
CAILE T1,^D80 ;TOO MANY?
POPJ P, ;YES, GO AWAY
MOVSI T1,LPLXOF ;CLEAR XOFF BIT
ANDCAM T1,LDBPAG(U) ;SO ONLYONE XON IS SENT
MOVE T1,FLPXON ;GET POINTER TO XON
MOVEM T1,LDBXNP(U) ;STORE WHERE IT WILL BE FORCED OUT.
PJRST TOPOKE ;START TTY MOVING
;IFN FTTPAG
;ROUTINE TO GET DDB OUT OF TI WAIT IF NEEDED
;CALLED BY:
; MOVE J,JOB #
; PUSHJ P,CLRTI
; RETURN HERE
;RESPECTS T1,T2
CLRTI:: PUSH P,T1 ;SAVE SOME AC'S
PUSH P,T2
LDB T1,PJBSTS## ;GET WAIT STATE CODE
CAIE T1,TIOWQ## ;IN TI WAIT?
JRST CLRTI1 ;NO--EXIT
PUSHJ P,TTYSRC ;FIND TTY DDB
JRST CLRTI1 ;NO DDB?
MOVE T1,[IOW,,IOACT]
ANDCAM T1,DEVIOS(F)
CLRTI1: POP P,T2
JRST TPOPJ##
IFN FTCAFE!FTNET,< ;INCLUDE THIS CODE IF WE HAVE A DC76
IFN FT2741!FTNET,< ; WITH 2741 SUPPORT
;SUBROUTINE TO UNLOCK 2741 KEYBOARD:
;CALL WITH:
; MOVEI U,ADDRESS-OF-LDB
; PUSHJ P,UNLKBD
; RETURN HERE
UNLKBD: MOVE T1,[XWD LDLXON, LDR2741] ;SET UP 2741 BIT
TDNN T1,LDBDCH(U) ;SKIP IF 2741 LINE
POPJ P,0 ;NOT A 2741
SKIPN LDBBKC(U) ;DON'T GIVE UP IF HAVE BRK CHAR
SKIPGE LDBDCH(U) ;SKIP IF NOT OUTPUT IN PROGRESS
POPJ P,0 ;JUST RETURN
PUSH P,T2 ;SAVE T2
PUSH P,T3 ;AND T3
MOVEI T1,ISRLPC ;FUNCTION
MOVEI T3,<LPCUKB>B27 ;SUBFUNCTION
PUSHJ P,@LDBISR(U) ;CALL D76INT (OR WHATEVER)
POP P,T3 ;RESTORE T3
PJRST T2POPJ## ;RESTORE T2 AND RETURN
> ;END FT2741
> ;END FTCAFE
;ROUTINE TO PUT SIXBIT NAME IN DEVNAM(DDB), AND TO SET PUNIT.
;CALL: SET DDB TO DEVICE DATA BLOCK TO RECEIVE THE NAME AND UNIT
; SET LINE TO LINE DATA BLOCK WHERE LINE NUMBER WILL BE FOUND
; AND SET OR CLEAR IMAGE BIT IN DEVMOD DEPENDING ON
; WHETHER THIS LINE WILL BE PTY-DRIVEN OR NOT
; PUSHJ P,SCNNAM
; RETURN
;CLOBBERS T1 AND T3
SCNNAM: MOVSI T1,(SIXBIT /CTY/) ;FIRST SET TO CTY
MOVEM T1,DEVNAM(F) ;IN CASE MAYBE IT IS.
LDB T1,LDPLNO ;GET PHYSICAL LINE NUMBER
DPB T1,PUNIT## ;AND STORE IT IN THE DDB
SETZM DEVSTS(F)
MOVEI T3,<1_I> ;GET IMAGE MODE BIT.
IORM T3,DEVMOD(F) ;SET IT IN THE DDB
MOVE T1,LDBDCH(U) ;GET DEVICE BITS
TRNE T1,LDRPTY ;IS THIS A PTY?
ANDCAM T3,DEVMOD(F) ;YES. CLEAR THE BIT.
TRNE T1,LDRCTY ;IS THIS THE CTY?
JRST SCNNMC ;YES. LEAVE CTY IN NAME WORD.
MOVSI T3,(SIXBIT /TTY/) ;NO. DEVICE IS "TTYNNN"
MOVEM T3,DEVNAM(F) ;SET UP THE "TTY" PART
MOVE T3,[POINT 6,DEVNAM(F),17] ;SET POINTER FOR "NNN"
PUSH P,T1+1 ;SAVE AN AC FOR DIVIDE BELOW
LDB T1,LDPLNO ;RESTORE LINE NUMBER
PUSHJ P,SCNNMR ;GO PUT NUMBER IN NAME
POP P,T1+1 ;RESTORE THE AC
SCNNMC: POPJ P,0 ;RETURN FROM SCNNAM
;SUBSIDIARY ROUTINE TO DO RADIX PRINT TO CORE.
SCNNMR: IDIVI T1,10 ;DEVICE NAMES ARE OCTAL
HRLM T1+1,0(P) ;STORE A DIGIT ON STACK
SKIPE T1 ;NEED MORE DIGITS?
PUSHJ P,SCNNMR ;YES. GO MAKE THEM.
HLRZ T1,0(P) ;RETRIEVE A DIGIT FROM STACK
ADDI T1,"0"-40 ;CONVERT TO SIXBIT
IDPB T1,T3 ;STORE IN OBJECT WORD (DEVNAM)
POPJ P,0 ;POP UP TO SCNNMR OR BACK TO SCNNAM
IFN FTNET,<
;ROUTINE TO LOCATE A NEW TTY DDB
SETSTA: PUSHJ P,FNDSTA ;FIND STATION
DPB T1,PDVSTA## ;PUT STA # IN DEVICE LOC FIELD
POPJ P, ;RETURN
FNDSTA::MOVE T1,LDBDCH(U) ;GET TTY BITS
TRNN T1,LDRPTY ;TTY A PTY LINE?
JRST DDBRL ;NO - BRANCH FOR REAL TTY
LDB T1,LDPLNO ;YES, GET LINE NUMBER ONLY
SUBI T1,PTYOFS## ;DECREMENT TO PTY LINE NUMBER
PUSH P,F ;SAVE TTY DDB FOR A SECOND
MOVE F,PTYTAB##(T1) ;GET PTY DDB
LDB T1,PDVSTA## ;GET LOCATION OF PTY
POP P,F ;RESTORE TTY DDB
POPJ P, ;AND RETURN TO CALLER
DDBRL: TRNN T1,LDRREM ;REMOTE STATION TTY?
JRST DDBRL1 ;NO, MUST BE A LOCAL TTY
HLRZ T1,LDBREM(U) ;YES, GET ADDRESS OF SCB
JUMPE T1,DDBRL1 ;LOCAL(?)
HLRZ T1,NDBNNM##(T1) ;GET THE NODE NUMBER
POPJ P, ;RETURN.
DDBRL1: MOVEI T1,LOCSTA## ;LOCAL STATION
POPJ P, ;RETURN
>
;ROUTINE TO ESTABLISH DEVICE OPR IF POSSIBLE
;CALL: MOVE T1,DEVICE NAME
; PUSHJ P,STDOPR
;RETURN CPOPJ IF ILLEGAL
;SKIP RETURN WITH DEVICE CHANGED
STDOPR::PUSHJ P,TTYPHY ;LOOK FOR THIS PHYSICAL NAME
POPJ P, ;FAILED IF NOT POSSIBLE
HRRZM U,OPRLDB## ;SAVE NEW LDB ADDRESS
MOVEM T1,DEVOPR## ;SAVE NEW NAME
JRST CPOPJ1## ;RETURN
SUBTTL ROUTINES FOR PTY
;PTYGET IS CALLED FROM PTYSER TO GET A CHARACTER SENT TO A TTY LINE
;AND IS THEREFORE A SIMPLIFIED VERSION OF XMTINT
PTYGET::MOVE T2,LDBTOT(U) ;BE SURE PUTTER
CAME T2,LDBTOP(U) ;IS NOT=TAKER
SOSGE LDBTOC(U) ;COUNT IS POSITIVE
JRST ZAPPTO
IBP LDBTOT(U) ;GET CURRENT CHARACTER ADDRESS
MOVE T2,LDBTOT(U) ;AND INTO T2
PUSHJ P,TTGETC ;GET THE CHARACTER
PUSHJ P,XMTBFF ;UPDATE CHUNK ADDRESS AND FREE CHUNK
JUMPE T3,PTYGET ;IF A NULL, LOOP AROUND
PUSHJ P,XMTWAK ;WAKE UP PTY-DRIVEN JOB
JRST CPOPJ1## ;AND GIVE SUCCESSFUL RETURN
ZAPPTO:
IFE FTMIC,<
PJRST ZAPOUT ;BE SURE POINTERS AND COUNT OK
>
IFN FTMIC,< ;IF MIC, HE CAN HAVE
PUSHJ P,ZAPOUT
PJRST MICRMT ;MIC ECHOES
>
;PTYPUT IS CALLED FROM PTYSER TO PLACE A CHARACTER IN A TTY INPUT
;BUFFER AS THOUGH THE TTY HAD BEEN TYPED ON. NO ECHOING IS ALLOWED,
;THOUGH AND THIS ROUTINE IS A SIMPLIFIED VERSION OF RECINT AND
;XMTECH, TO MAKE THE CHARACTERS VISIBLE TO THE CONTROLLED JOB WITHOUT ECHOING
CNTRLO==17
PTYPUT::PUSHJ P,SAVE4## ;SAVE P1
TLNE T1,CHALT ;ALTMODE?
PUSHJ P,RIALTO ;CONVERT
MOVE P1,T1 ;SAVE BITS
CAIN T3,CNTRLO
PJRST FLPCNO
IFN FTMIC,< ;IF MIC
SKIPE LDBMIC(U)
CAIE T3,1 ;CONTROL A COUNTS AS ^C TO MIC
> ;END OF IF MIC
CAIN T3,3 ;CONTROL C?
JRST PTYCC ;YES. SPECIAL CHECKING
IFN FTWATCH,<
CAIN T3,"T"-100
JRST PTYCT
PTYINA:>
MOVSI T2,L2LCCS ;NOT CONTROL C, SO
ANDCAM T2,LDBBY2(U) ;CLEAR SYNC BIT
IFN FTMIC,< ;IF MIC
SKIPE T2,LDBMIC(U)
JRST PTYMCK
> ;END OF IF MIC
PTYPT1: MOVE T2,LDBTIC(U) ;IS THIS LINE ALREADY FULL?
CAIG T2,^D200 ; ..
SKIPG TTFREN## ;OR LISTS EXHAUSTED?
POPJ P,0 ;YES. DISCARD CHAR
SKIPN TTFREE## ;ANY FREELIST
POPJ P,0 ;NO--PUNT
IFN FTMIC,< ;IF MIC
SKIPE LDBMIC(U)
PUSHJ P,MICECH ;SAY COL1 TO MIC
> ;END OF IF MIC
PUSHJ P,TTPTIC ;UPDATE BYTE POINTER, STORE CHARACTER
TLNE P1,CHBRK ;IS THIS A BREAK CHARACTER?
MOVEM T2,LDBBKU(U) ;YES. STORE NEW ^U POINTER
IBP LDBECT(U) ;NOW COUNT ECHO POINTER
MOVE T2,LDBECT(U)
PUSHJ P,TTGETC ;AND GET THE CHARACTER (TO ADJUST T2)
MOVEM T2,LDBECT(U) ;NEW CHUNK. STORE CA.
TLNE P1,CHBRK ;BREAK CHAR?
AOS LDBBKC(U) ;YES. COUNT BREAKS
AOS T2,LDBTIC(U) ;COUNT TYPEIN COUNT
TLNE U,LDLBKA ;TTY IN BREAK-ON-ALL MODE?
PUSHJ P,RCVWKQ ;YES. WAKE JOB IF WAITING
CAIG T2,^D79 ;ENOUGH TO WAKE ON?
TLNE P1,CHBRK ;OR A BREAK CHARACTER?
PUSHJ P,ECHBRK ;YES. WAKE THE JOB
JRST CPOPJ1## ;SUCCESFUL RETURN TO PTYSER
;MORE OF PTYPUT. SPECIAL CODE FOR CONTROL C
PTYCC:
IFN FTMIC,< ;IF MIC
SKIPE T1,LDBMIC(U)
PUSHJ P,MICRIC
> ;END OF IF MIC
PUSHJ P,RIDLN ;YES. DO SO.
MOVSI T1,L2LCCS ;SECOND CONTROL C?
TDNE T1,LDBBY2(U) ; ..
PUSHJ P,CNCCHK ;YES. FORCE CONTROL C IF POSSIBLE
JRST PTYCC1 ;NOT SECOND--GO SET BIT
JRST PTYCC4 ;NO. (JACCT) JUST PASS THE CHARACTER
PUSHJ P,TSETBI ;YES. CLEAR BUFFERS
PUSHJ P,TSETBO ; ..
JRST CPOPJ1## ;AND RETURN TO PTYSER
PTYCC4: PUSHJ P,TTHALT ;FORCE .HALT COMMAND
PTYCC1: MOVSI T1,L2LCCS ;SET "^C LAST IN" BIT
IORM T1,LDBBY2(U) ;SET BIT FOR NEXT TIME
JRST PTYPT1 ;AND GO STORE CONTROL C IN INPUT BUFFER
;HERE ON ^O TO PTY
FLPCNO: MOVSI T1,LDLOSU ;FLIP THE ^O BIT WHEN PTY OR REMOTE
XORM T1,LDBDCH(U) ;SENDS ^O
PUSHJ P,TSETBO ;CLEAR THE OUTPUT BUFFER
PJRST XMTWAK ;WAKE JOB IF IN OUTPUT WAIT
IFN FTWATCH,<
PTYCT: PUSHJ P,DOCTLT
JRST PTYINA
JRST TTFRC1
JRST CPOPJ1##
>
;TWO SUBROUTINES TO INITIALIZE THE LDB. LDBCLR SETS UP THE BITS FROM
;INITIAL STATE FOUND IN LINTAB, THEN FALLS INTO LDBINI. LDBINI JUST
;CLEARS AS REQUIRED ON 140 RESTART.
;BOTH SHOULD BE CALLED WITH LINE SET UP.
LDBCLR::LDB T1,LDPLNO ;GET LINE NUMBER
LDB T1,LNPVRG ;GET VIRGIN-STATE BITS FROM LINTAB
TRZ T1,4 ;CLEAR INITIA BIT
DPB T1,LDPVR2 ;STORE THEM AROUND THE LDB
LSH T1,-5 ; ..
DPB T1,LDPVR1 ; ..
LSH T1,-6 ; ..
DPB T1,LDPFLC ;LAST IS THE FILLER CLASS
IFN FTCAFE&FT2741,<
LDB T1,LDPSPD
MOVEI T2,LDR2741
CAIN T1,104
IORM T2,LDBDCH(U)
>
LDBINI::MOVSI T1,LDBCMR ;CLEAR COMMAND REQUEST BIT
ANDCAM T1,LDBDDB(U) ;IN LINE DATA BLOCK
HRLOI T1,LDIBCM ;BYTE WORD CLEAR MASK
ANDCAM T1,LDBBYT(U) ;CLEAR MOST BYTES
MOVE T1,LDIDCM ;CLEAR DEVICE CHARACTERISTICS
ANDCAM T1,LDBDCH(U) ; AS APPROPRIATE
MOVEI T1,^D72 ;INITIAL VALUE OF TTY WIDTH
DPB T1,LDPWID ;STORE IN LDB
MOVSI T1,L2LCLR ;CLEAR NECESSARY BITS IN LDBBY2
ANDCAM T1,LDBBY2(U) ; ..
LDB T3,LDPLNO ;COPY LINE NUMBER
MOVSI T1,LDLCOM+LDLLCT ;ASSUME AT COMMAND LEVEL AND UPPER CASE
IFN FTD10H,< ;CODE FOR 2741 ON DC10H
HLRZ T2,LINTAB##(T3) ;GET BITS FROM LINTAB
TRNN T2,TTVDIS## ;IS IT A DISPLAY LINE
; WHICH INDICATES ITS A DC10H LINE?
JRST .+4 ;NO
MOVSI T2,LILCFE ;SET CLEVER BIT
IORM T2,LDBISR(U) ; IN THE LDB.
TRO T1,LDR2741 ;ALSO TELL LDB ITS A 2741
>;END IFN FTD10H
CAIN T3,TCONLN## ;IS THIS THE CTY'S LINE NUMBER?
TRO T1,LDRCTY ;YES--SET CTY BIT
CAILE T3,TCONLN## ;ABOVE TCONLN?
TRO T1,LDRPTY ;YES. SET PTY BIT
IORM T1,LDBDCH(U) ;PUT THESE BITS IN THE LDB
TRNE T1,LDRPTY ;IS THIS A PTY?
PUSHJ P,TSETBI ;YES--CLEAR INPUT BUFFER
MOVSI T1,LPLCLR ;CLEAR PAGE BITS
ANDCAM T1,LDBPAG(U) ;...
MOVSI T1,LPLALT
XCT TTDALT## ;IORM OR ANDCAM DEPENDING ON DEFAULT
; FOR TTY ALT (SEE COMDEV)
IFN FTMIC,< ;IF MIC
SETZM LDBMIC(U) ;CLEAR MIC WORD
> ;END OF IF MIC
MOVSI T3,L1LOFL ;OFF LINE BIT
MOVEI T1,ISROFL
PUSHJ P,@LDBISR(U)
IORM T3,LDBOFL(U)
POPJ P,0 ;RETURN FROM LDBINI
SUBTTL IMPURE DATA
$LOW
CMDLIN::0 ;LDB USING NEXT 4 WORDS
COMTIA::0 ;COMMAND TYI ADDRESS
COMTOA::0 ;COMMAND TYO ADDRESS
TTCMCH::0 ;COMMAND LEVEL CHARACTER LAST READ
TTCMCA::0 ;COMMAND LEVEL CHAR ADDR
IFN FTDIAL,<
DSCNUM: BLOCK 2 ;PHONE NUMBER BEING DIALLED, OR LAST DIALLED
>
IFN FTMIC,<
MICLIN:-1
>
.GTSCN::
IFN FTRSP,<
;SCNSER RESPONSE DATA
%SCNRI::0 ;(0)NUMBER OF RCV INTERRUPTS
%SCNXI::0 ;(1)NUMBER OF XMT INTERRUPTS
%SCNEI::0 ;(2)NUMBER OF ECHO INTERRUPTS (SUBSET OF %SCNXI)
> ;END FTRSP
IFE FTRSP,<
BLOCK 3 ;0,1,2 IF NO RSP DATA
>
TIWRNN::EXP ^D80 ;(3)MAX BUFFER SIZE
%SCNAL::0 ;(4)NUMBER OF ACTIVE LINES
RPIMWN::EXP ^D60 ;(5) PIM BUFFER SIZE
EXP RECINT ;(6)FOR MONITOR TEST
EXP XMTINT ;(7)PROGRAMS
EXP TYPEX ;(10)
SCNMXL==:<<.-.GTSCN-1>B26>
TIWRN1: ^D80 ;WORD TO SAVE OLD BUFFER LIMIT
RPIMW1: ^D80 ;WORD TO SAVE OLD PIM LIMIT
$LIT
SCNEND: END