Trailing-Edge
-
PDP-10 Archives
-
de-10-omona-v-mc9
-
syserr.hlp
There are 25 other files named syserr.hlp in the archive. Click here to see a list.
SYSERR.HLP VERSION 12A(1013) 5-OCT-1978
SYSERR IS A PROGRAM DESIGNED TO LIST THE SYSTEM ERROR FILE
FOR TOPS10 SYSTEMS.
TO RUN SYSERR TYPE "R SYSERR(C.R.)"
NOTE: (C.R.) MEANS CARRIAGE RETURN.
***** COMMAND STRING:
*DEV:FILE.EXT[PPN,SFD1]/SWITCH/SWITCH
***** DEFINITIONS:
DEV: ANY SYSTEM DEVICE
FILE.EXT A PARTICULAR FILE NAME AND EXTENSION
[PPN,SFD1] A PROJECT,PROGRAMMER PAIR
WITH OPTIONAL SUB-FILE DIRECTORY PATH
/SWITCH SWITCHES AS BELOW SEPARATED WITH /
***** DEFAULTS:
DEV: DSK
INPUT FILE: ERROR.SYS
OUTPUT FILE: ERROR.LST (ALSO SEE SYSERR MANUAL FOR OTHER DEFAULTS)
[PPN,SFD1]: USER'S OWN
SWITCHES: /ALLSUM
EXAMPLE:
*TTY:=/ALL/BRIEF(C.R.)
THIS WILL OUTPUT ON YOUR TTY A BRIEF LISTING OF ALL ERROR INFORMATION
FOUND IN THE FILE "ERROR.SYS" IN THE AREA SYS:. THIS SHOULD
NORMALLY BE THE FIRST COMMAND GIVEN TO SYSERR. SCANNING THE OUTPUT
WILL POINT OUT DEVICES OR OTHER AREAS OF THE SYSTEM OF INTEREST AND
SUBSEQUENT COMMANDS MAY BE GIVEN TO LIST ERRORS OF INTEREST.
EXAMPLE:
*TTY:=/SEQUENCE:XXX/DETAIL(C.R.)
THIS COMMAND WILL PRINT OUT A DETAILED LISTING OF ONLY THE ERROR
SPECIFIED BY THE SEQUENCE NUMBER. THE SEQUENCE NUMBER IS THE FIRST COLUMN
IN THE BRIEF LISTING AND IS AN INDEX INTO THE ERROR FILE SO THAT A SINGLE
ERROR REPORT MAY BE SPECIFIED FOR EXPANSION IN DETAIL.
THE COMMAND THAT WILL PRINT THE HELP FILE ON YOUR TERMINAL IN CASE YOU
HAVE FORGOTTEN A SPECIFIC COMMAND IS:
*/HELP(C.R.)
***** SWITCHES:
/ALL LIST ALL ENTRIES
/ALLNXM LIST ALL THOSE CAUSED BY NXM
/ALLPAR LIST ALL THOSE CAUSED BY PARITY ERRORS
/ALLPER LIST ALL PERFORMANCE ENTRIES
/ALLSUM GIVE ALL DEVICE SUMMARY
/CHNALL LIST ALL DATA CHANNEL ENTRIES
/CHNNXM LIST THOSE CAUSED BY NXM
/CHNPAR LIST THOSE CAUSED BY PARITY ERRORS
/CHNSUM GIVE DATA CHANNEL SUMMARY
/CPUALL LIST ALL PROCESSOR RELATED ENTRIES
/CPUPAR LIST THOSE CAUSED BY PARITY ERRORS
/CPUPER LIST ALL CPU PERFORMANCE ENTRIES
/CPUSUM GIVE PROCESSOR SUMMARY
/CPUNXM LIST THOSE CAUSED BY NXM
/CPURLD LIST THOSE CAUSED BY A RELOAD (10 OR F.E. 11)
/CPUCHK LIST ENTRYS CAUSED BY A STOPCD
/DSKALL LIST ALL DISK,DRUM OR DISKPACK ENTRIES
OTHER THAN MASSBUS DEVICES
/DSKPAR LIST THOSE CAUSED BY PARITY ERRORS
/DSKPER LIST ALL DISK,DRUM, AND DISKPACK PERFORMANCE ENTRIES
/DSKSUM GIVE DISK,DRUM, AND DISKPACK SUMMARY
/DSKBTH LIST BOTH DSK AND CHN ENTRIES. SAME AS /DSKALL/CHNALL
/MASALL LIST ALL ENTRIES CONCERNING MASSBUS DEVICES
(TU16,TU45,RP04,RP05,&RP06)
/MASPAR LIST ONLY THOSE CAUSED BY PARITY ERRORS
/MASNXM LIST THOSE CAUSED BY NXM
/MASSUM LIST SUMMARY INFORMATION
/MASBTH LIST BOTH MAS AND CHN ENTIRES. SAME AS /MASALL/CHNALL
/MAGALL LIST ALL ENTRIES FOR MAGTAPE.
/MAGPAR LIST THOSE ENTRIES CAUSED BY PARITY ERRORS
/MAGPER LIST PERFORMANCE STATISTICS FOR MAGTAPE.
/MAGSUM GIVE MAGTAPE SYSTEM SUMMARY.
/COMALL LIST ALL DL10 BASED COMMUNICATION ERRORS
/URDALL LIST ALL UNIT RECORD ENTRYS (CURRENTLY ONLY LP100)
/BEGIN:MM-DD-YY:HH:MM:SS BEGIN LISTING OF ENTRIES LOGGED ON
DATE SPECIFIED BY MM-DD-YY. OTHER DATE FORMATS
SUCH AS DD-MM-YY AND JAN-12-1972 ARE ACCEPTABLE.
FORMATS SUCH AS -2D (2DAYS AGO) ARE ALSO ACCEPTABLE.
/END:MM-DD-YY:HH:MM:SS END LISTING OF ENTRIES ON THE
DATE SPECIFIED. THE SAME FORMATS ARE ACCEPTABLE.
/DEV:NAME SELECT ONLY THOSE ENTRIES WHICH INVOLVE THE DEVICE
SPECIFIED BY NAME FOR LISTING. A NAME OF DP WILL LIST
ALL ENTRIES FOR DP'S. USING ONLY THE /DEV:
WITHOUT LISTING SWITCHES SUCH AS /MASALL WILL CAUSE
SYSERR TO EXAMINE EACH ENTRY AND FORCE LISTINGS FOR
ENTRIES WHOSE DEVICE NAME MATCH. AVAILABLE NAMES
INCLUDE "KLCPU","11CPU","KLERR","DL10" , AND
MASSBUS NAMES SUCH AS "RPC1" OR "FSA3" OR
"RP04","TU16",&"TU45","RP05","RP06".
/NDEV: USED WITH /MASALL, THIS SWITCH WILL CAUSE LISTING OF ALL
MASSBUS ENTRIES ASSOCIATED WITH DEVICES OTHER THAN
THAT DEVICE NAME SPECIFIED.
/DETAIL: LIST ALL INFORMATION FOR MASSBUS AND MAGTAPE
INSTEAD OF SHORT LISTING. MAY BE ABBREVIATED TO "/DET"
/RETRY: LIST ONLY THOSE ENTRIES WHOSE RETRY COUNT IS GREATER
THAN THE VALUE SPECIFIED.
/ID:IDENTIFICATION SELECT ENTRIES WHICH HAVE THE SAME
ID AS SPECIFIED. FOR MAGTAPE THIS IS THE
REELID AND FOR DSK'S IT IS THE PACK ID.
/STR:NAME SELECT ENTRIES WHICH HAVE THE SAME
STRUCTURE NAME AS THAT SPECIFIED. USED WITH/DSKXXX
AND /MASXXX. SIMILAR TO /ID:.
/SRE:NUMBER CHANGE THE DEFAULT THRESHOLD OF SOFT READ ERRORS
USED WITH THE MAGPER SWITCH. SEE SYSERR MANUAL FOR
FURTHER DETAILS.
/SWE:NUMBER CHANGE THE DEFAULT THRESHOLD OF SOFT WRITE ERRORS
USED WITH THE MAGPER SWITCH. SEE SYSERR MANUAL FOR
FURTHER DETAILS.
/SEQUENCE:NUMBER WILL CAUSE SYSERR TO OUTPUT ONLY THE ONE ENTRY
SPECIFIED BY ITS SEQUENCE NUMBER.
/BRIEF:NUMBER WILL CAUSE SYSERR TO OUTPUT ONLY 1 OR 2 LINE REPORTS
FOR EACH ERROR. THE NUMBER SPECIFIES THE LINE WIDTH
OF THE TERMINAL. DEFAULT VALUE IS 72.
/NOW CAUSES SYSERR TO SET UP AN IPCF LINK WITH DAEMON
AND REPORT ERRORS IN REAL TIME. MAY BE USED WITH ANY
OTHER COMBINATION OF SYSERR SWITCHES.
(NOTE: THIS REQUIRES VERSION 16(612) OF DAEMON)
END OF SYSERR.HLP %7(432)