Trailing-Edge
-
PDP-10 Archives
-
decus_20tap2_198111
-
decus/20-0026/tetra.ssp
There are 2 other files named tetra.ssp in the archive. Click here to see a list.
C TETR 10
C ..................................................................TETR 20
C TETR 30
C SUBROUTINE TETRA TETR 40
C TETR 50
C PURPOSE TETR 60
C COMPUTE A TETRACHORIC CORRELATION COEFFICIENT BETWEEN TWO TETR 70
C VARIABLES WHERE DATA IN BOTH VARIABLES HAVE BEEN REDUCED TETR 80
C ARTIFICIALLY TO TWO CATEGORIES. TETR 90
C TETR 100
C USAGE TETR 110
C CALL TETRA (N,U,V,HU,HV,R,RS,IE) TETR 120
C TETR 130
C DESCRIPTION OF PARAMETERS TETR 140
C N - NUMBER OF OBSERVATIONS TETR 150
C U - INPUT VECTOR OF LENGTH N CONTAINING THE FIRST VARIABLE TETR 160
C REDUCED TO TWO CATEGORIES TETR 170
C V - INPUT VECTOR OF LENGTH N CONTAINING THE SECOND VARIABLETETR 180
C REDUCED TO TWO CATEGORIES TETR 190
C HU - INPUT NUMERICAL CODE INDICATING THE HIGHER CATEGORY OF TETR 200
C THE FIRST VARIABLE. IF ANY VALUE OF VARIABLE U IS TETR 210
C EQUAL TO OR GREATER THAN HU, IT WILL BE CLASSIFIED AS TETR 220
C THE HIGHER CATEGORY, OTHERWISE AS THE LOWER CATEGORY. TETR 230
C HV - SAME AS HU EXCEPT THAT HV IS FOR THE SECOND VARIABLE. TETR 240
C R - TETRACHORIC CORRELATION COMPUTED TETR 250
C RS - STANDARD ERROR OF TETRACHORIC CORRELATION COMPUTED TETR 260
C IE - ERROR CODE TETR 270
C 0 - NO ERROR TETR 280
C 1 - UNABLE TO COMPUTE A TETRACHORIC CORRELATION DUE TO TETR 290
C THE FACT THAT AT LEAST ONE CELL SHOWS ZERO FRE- TETR 300
C QUENCY IN THE 2X2 CONTINGENCY TABLE CONSTRUCTED TETR 310
C FROM INPUT DATA. IN THIS CASE, R AND RS ARE SET TETR 320
C TO 10**75. (SEE GUILFORD, 1956) TETR 330
C 2 - THE ROOT SOLVER GIVES MULTIPLE ROOTS, OR NO ROOTS, TETR 340
C R, IN THE INTERVAL (-1,1) INCLUSIVE. R AND RS ARE TETR 350
C SET TO 10**75. TETR 360
C 3 - UNABLE TO COMPUTE A SATISFACTORY VALUE OF TETRA- TETR 370
C CHORIC CORRELATION USING NEWTON-RAPHSON METHOD OF TETR 380
C APPROXIMATION TO THE ROOT OF THE EQUATION. R AND TETR 390
C RS ARE SET TO 10**75. SEE SUBROUTINE POLRT ERROR TETR 400
C INDICATORS. TETR 410
C 4 - HIGH ORDER COEFFICIENT OF THE POLYNOMIAL IS ZERO. TETR 420
C SEE SUBROUTINE POLRT ERROR INDICATORS. TETR 430
C TETR 440
C REMARKS TETR 450
C VALUES OF VARIABLES U AND V MUST BE NUMERICAL, AND TETR 460
C ALPHABETIC AND SPECIAL CHARACTERS MUST NOT BE USED. TETR 470
C FOR A DEPENDABLE RESULT FOR TETRACHORIC CORRELATION, TETR 480
C IT IS RECOMMENDED THAT N BE AT LEAST 200 OR GREATER. TETR 490
C TETR 500
C SUBROUTINES AND FUNCTION SUBPROGRAMS REQUIRED TETR 510
C NDTRI TETR 520
C POLRT--THIS POLYNOMIAL ROOT ROUTINE WAS SELECTED BECAUSE OF TETR 530
C ITS SMALL STORAGE REQUIREMENT. OTHER SSP ROUTINES TETR 540
C WHICH COULD REPLACE POLRT ARE PRQD AND PRBM. THEIR TETR 550
C USE WOULD REQUIRE MODIFICATION OF TETRA. TETR 560
C TETR 570
C METHOD TETR 580
C REFER TO J. P. GUILFORD, 'FUNDAMENTAL STATISTICS IN PSYCHO- TETR 590
C LOGY AND EDUCATION', MCGRAW-HILL, NEW YORK, 1956, CHAPTER 13TETR 600
C AND W. P. ELDERTON, 'FREQUENCY CURVES AND CORRELATION' 4-TH TETR 610
C ED., CAMBRIDGE UNIVERSITY PRESS, 1953, CHAPTER 9. TETR 620
C TETR 630
C ..................................................................TETR 640
C TETR 650
SUBROUTINE TETRA (N,U,V,HU,HV,R,RS,IE) TETR 660
C TETR 670
DIMENSION XCOF(8),COF(8),ROOTR(7),ROOTI(7) TETR 680
DIMENSION U(1),V(1) TETR 690
DOUBLE PRECISION X31,X32,X312,X322 TETR 700
C TETR 710
C CONSTRUCT A 2X2 CONTINGENCY TABLE TETR 720
C TETR 730
A=0.0 TETR 740
B=0.0 TETR 750
C=0.0 TETR 760
D=0.0 TETR 770
DO 40 I=1,N TETR 780
IF(U(I)-HU) 10, 25, 25 TETR 790
10 IF(V(I)-HV) 15, 20, 20 TETR 800
15 D=D+1.0 TETR 810
GO TO 40 TETR 820
20 B=B+1.0 TETR 830
GO TO 40 TETR 840
25 IF(V(I)-HV) 30, 35, 35 TETR 850
30 C=C+1.0 TETR 860
GO TO 40 TETR 870
35 A=A+1.0 TETR 880
40 CONTINUE TETR 890
C TETR 900
C TEST WHETHER ANY CELL IN THE CONTINGENCY TABLE IS ZERO. TETR 910
C IF SO, RETURN TO THE CALLING ROUTINE WITH R=0.0 AND IE=1. TETR 920
C TETR 930
IE=0 TETR 940
IF(A) 60, 60, 45 TETR 950
45 IF(B) 60, 60, 50 TETR 960
50 IF(C) 60, 60, 55 TETR 970
55 IF(D) 60, 60, 70 TETR 980
60 IE=1 TETR 990
GO TO 86 TETR1000
C TETR1010
C COMPUTE P1, Q1, P2, AND Q2 TETR1020
C TETR1030
70 FN=N TETR1040
P1=(A+C)/FN TETR1050
Q1=(B+D)/FN TETR1060
P2=(A+B)/FN TETR1070
Q2=(C+D)/FN TETR1080
C TETR1090
C FIND THE STANDARD NORMAL DEVIATES AT Q1 AND Q2, AND THE TETR1100
C ORDINATES AT THOSE POINTS TETR1110
C TETR1120
CALL NDTRI (Q1,X1,Y1,ER) TETR1130
CALL NDTRI (Q2,X2,Y2,ER) TETR1140
C TETR1150
C COMPUTE THE TETRACHORIC CORRELATION COEFFICIENT TETR1160
C TETR1170
IF(X1) 76, 72, 76 TETR1180
72 IF(X2) 76, 74, 76 TETR1190
74 R=0.0 TETR1200
GO TO 90 TETR1210
76 XCOF(1)=-((A*D-B*C)/(Y1*Y2*FN*FN)) TETR1220
XCOF(2)=1.0 TETR1230
XCOF(3)=X1*X2/2.0 TETR1240
XCOF(4)=(X1*X1-1.0)*(X2*X2-1.0)/6.0 TETR1250
X31=DBLE(X1) TETR1260
X32=DBLE(X2) TETR1270
X312=X31**2 TETR1280
X322=X32**2 TETR1290
XCOF(5)=SNGL(X31*(X312-3.0D0)*X32*(X322-3.0D0)/24.0D0) TETR1300
XCOF(6)=SNGL((X312*(X312-6.0D0)+3.0D0)*(X322*(X322-6.0D0)+3.0D0) TETR1310
1 /120.0D0) TETR1320
XCOF(7)=SNGL(X31*(X312*(X312-10.0D0)+15.0D0)*X32*(X322*(X322-10.0 TETR1330
1 D0)+15.0D0)/720.0D0) TETR1340
XCOF(8)=SNGL((((X312-15.0D0)*X312+45.0D0)*X312-15.0D0)*(((X322- TETR1350
1 15.0D0)*X322+45.0D0)*X322-15.0D0)/5040.0D0) TETR1360
C TETR1370
CALL POLRT (XCOF,COF,7,ROOTR,ROOTI,IER) TETR1380
C TETR1390
J=0 TETR1400
IF(IER) 78, 78, 84 TETR1410
78 DO 82 I=1,7 TETR1420
IF(ABS(ROOTI(I))-.5*ABS(ROOTR(I))*1.0E-6)79,79,82 TETR1430
79 R=ROOTR(I) TETR1440
IF(ABS(R)-1.0)81,81,80 TETR1450
80 R=1.7E38 TETR1460
GO TO 82 TETR1470
81 J=J+1 TETR1480
82 CONTINUE TETR1490
IF(J-1)83,88,83 TETR1500
83 IE=2 TETR1510
GO TO 86 TETR1520
C TETR1530
C UNABLE TO COMPUTE R TETR1540
C TETR1550
84 IE=IER TETR1560
86 R=1.7E38 TETR1570
RS=R TETR1580
GO TO 100 TETR1590
88 IF(R-1.7E38)90,83,83 TETR1600
C TETR1610
C STANDARD ERROR OF R=0.0 TETR1620
C TETR1630
90 RS= SQRT(P1*P2*Q1*Q2)/(Y1*Y2* SQRT(FN)) TETR1640
C TETR1650
100 RETURN TETR1660
END TETR1670