Trailing-Edge
-
PDP-10 Archives
-
decuslib10-09
-
43,50466/forlib.man
There are 4 other files named forlib.man in the archive. Click here to see a list.
OPERATING INSTRUCTIONS FOR W.M.U. SUBROUTINES IN SYS:FORLIB.REL.
DISCLAIMER: ALTHOUGH ALL THE SUBROUTINES LISTED HEREIN HAVE BEEN
CAREFULLY TESTED, THE AUTHOR MAKES NO GUARANTEE OF THEM
WHATSOEVER,AND CAN ASSUME NO RESPONSIBILTY FOR ANY ERRORS IN THEM OR
IN THEIR USE.
SUBROUTINES AVAILABLE:
ACMSRT: SORT
ALLCOR: DYNAMIC CORE ALLOCATION.
ASSIGN: ASSIGN A DEVICE
BLOCKT: TRANSFER A BLOCK (ARRAY OR VECTOR) OF DATA (BLT)
BUSY: STOP PROGRAM UNTIL DEVICE IS AVAILABLE.
CHKNAM: CHECK LEGALITY OF FILENAME.
CLOCK: DETERMINE TIME OF DAY IN HOURS,MIN.,SEC.,1/60TH'S SEC.
DAY: DETERMINE YEAR, MONTH, AND DATE.
DEASSIGN: DEASSIGN A DEVICE
DELETE: DELETE FILES.
DEVCHR: DETERMINE AND RETURN DEVICE CHARACTERISTICS.
DEVICE: CALL EXIT IF DEVICE IS NOT TELETYPE.
DEVTYP: RETURN RESULT OF DEVTYP MONITOR CALL
DISMOUNT: REQUEST THE OPERATOR TO DISMOUNT A DEVICE.
DROTATE: DOUBLE PRECISION ROTATE(ROTC)
DSHIFT: DOUBLE PRECISION LOGICAL SHIFT(LSHC)
DTRNAC: DECTAPE RANDOM ACCESS.(I/O)
DYTIME: DAYTIME IN MILLISECONDS.
ECHO: TURN ECHOING OF TELETYPE INPUT ON OR OFF.
EXIST: CHECK FOR EXISTANCE OF FILE.
FNDSPC: FIND FILE STRUCTURE WITH MOST FREE SPACE
GETBYT: GET AN ARBITRARY BYTE.
GETCHR: UNPACK A CHARACTER FROM A WORD.
GETPPN: RETURN PROJECT-PROGRAMMER NUMBER OF USER.
GTCORE: GET LOW SEGMENT CORE FROM FOROTS.
JOBNUM: DETERMINE JOB NUMBER.
LSCORE: RETURN CORE ALLOCATED BY GTCORE.
MAXIMUM: FIND MAXIMUM OF A LIST.
MAXWYT: LIMIT WAIT FOR INPUT FROM TELETYPE.
MINIMUM: FIND MINIMUM OF LIST.
MINVSQ: INVERT A GENERAL SQUARE MATRIX.
MOUNT: REQUEST THE OPERATOR TO MOUNT A DEVICE.
PEEK: EXAMINE A MONITOR LOCATION
PRINTS: PRINT A SPECIFIED FILE ON THE LINE PRINTER.
PROTEK: PROTECT A FILE FROM WITHIN PROGRAM.
PUTBYT: PUT AN ARBITRARY BYTE.
PUTCHR: PACK A CHARACTER INTO A WORD.
QUEOUT: QUEUE A FILE TO AN OUTPUT SPOOLER.
REASSIGN: REASSIGN A DEVICE TO ANOTHER JOB.
REDTTY: READ TTY PARAMETERS
RENAME: RENAME A FILE.
RENAMS: RENAME,DELETE, AND/OR PROTECT FILES ON ANY DEVICES.
RESTART: RESTART PROGRAM AT BEGINNING.
RNTIME: RUNTIME OF JOB IN MILLISECONDS.
ROTATE: SINGLE PRECISION ROTATE(ROT)
RUNUUO: TRANSFER CONTROL TO NEW PROGRAM.
SETTTY: SET TTY PARAMETERS
SHIFT: SINGLE PRECISION LOGICAL SHIFT(LSH)
SLEEP: PUT JOB TO SLEEP FOR PREDETERMINED TIME.
SORT: SORT.
SSORT: SORT.
SUBMIT: ENTER A JOB IN THE INPUT (BATCH) QUEUE.
TRUTH: MANIPULATE COMPACTED TRUTH TABLE.
TTYNAM: RETURN NAME OF USER'S TELETYPE.
TTYPTY: DETERMINE IF ON TELETYPE OR PSEUDO-TELETYPE.
TYPEON: TURN OFF CONTROL O AND TURN ON TYPE OUT
XPRODH: FORM CROSS-PRODUCT MATRIX AND SUMS.
XPRODP: FORM CROSS-PRODUCT MATRIX AND SUMS.
ZEROH: ZERO MATRIX AND VECTOR.
ZEROP: ZERO VECTOR.
************************************************************************
DESCRIPTIONS OF INDIVIDUAL SUBROUTINES.
ACMSRT
PURPOSE TO SORT A SINGLE DIMENSIONAL ARRAY INTO ASCENDING
ORDER.
USAGE CALL ACMSRT(VECTOR,N)
WHERE VECTOR IS THE SINGLE DIMENSIONAL ARRAY( A VECTOR)
TO BE SORTED.
N IS THE NUMBER OF ELEMENTS TO BE SORTED IN THE
ARRAY. N IS LIMITED BY THE AMOUNT OF CORE
AVAILABLE TO THE PROGRAM, AND BY THE PROGRAM.
(IF CORE IS AVAILABLE, N MAY BE AS LARGE AS
2**17-1) 20000 NUMBERS MAY BE SORTED IN
APPROXIMATELY 3.5 SECONDS OF CPU TIME.
METHOD ORDERING IS BY INTEGER SUBRACTION. PROGRAM TAKEN
FROM JOURNAL OF THE ASSOCIATION OF COMPUTING MACHINERY.
************************************************************************
ALLCOR
PURPOSE: DYNAMICALLY ALLOCATE CORE FOR USE BY A FORTRAN PROGRAM.
THIS ALLOWS A PROGRAM TO HANDLE LARGE PROBLEMS WITHOUT HAVING TO
RESERVE THAT MUCH SPACE WHEN THE PROGRAM WAS LOADED, THUS
PENALIZING USERS WHO DON'T NEED THAT MUCH SPACE AND ALSO HURTING
SYSTEM THROUGHPUT.
USAGE: CALL ALLCOR(MAX,IERR,IREL,SPACE(1))
WHERE MAX: TOTAL AMOUNT OF STORAGE TO BE RESERVED.
IERR: IS ERROR CODE RETURNED.
IERR=0 NO ERROR.
IERR=1 WARNING! CORE OBTAINED BUT NO MORE IS
AVAILABLE, OR MAX<0. MAY RESULT IN FATAL ERROR
LATER IN RUN.
IERR=-1 CORE NOT AVAILABLE.
IREL: SUBSCRIPT ON SPACE SUCH THAT SPACE(IREL) IS
FIRST LOCATION IN ALLOCATED CORE. OTHER ARRAYS
(BEYOND FIRST) ARE AT SPACE(IREL+LENGTH1),
SPACE(IREL+LENGTH1+LENGTH2),ETC. WHERE LENGTHN IS
SIZE IN WORDS OF THE NTH ARRAY. REMEMBER THAT DOUBLE
PRECISION AND COMPLEX ARRAYS USE TWO WORDS PER ENTRY.
SPACE: A ONE ELEMENT ARRAY WHICH ALL ALLOCATED CORE
IS TO BE ADDRESSED RELATIVE TO. (MUST BE SINGLE PRECISION)
THIS ROUTINE MAY OPERATE IN EITHER OF TWO MODES. ON A NON-
VIRTUAL MEMORY SYSTEM, IT WILL ATTEMPT TO ALLOCATE CORE IN THE
PROGRAMS HIGH SEGMENT. THIS REQUIRES THAT EITHER FOROTS
BE FORCED TO LOAD INTO THE LOW SEGMENT, SO THAT THERE IS NO
HIGH SEGMENT AT ALL, OR CREATING A NON-SHAREABLE HIGH SEGMENT
AS PART OF THE PROGRAM (IT CANNOT BE GETSEGED). IF A
WRITEABLE HIGH SEGMENT CAN NOT BE CREATED, OR THE HIGH SEGMENT
WHICH EXISTS CAN NOT BE WRITE ENABLED, ALLCOR WILL PRINT THE
MESSAGE "CANNOT WRITE ENABLE HIGH SEGMENT DATA AREA". THE LOAD
COMMAND FOR A PROGRAM USING THIS FORM OF ALLCOR IS
LOAD %'SEG:LOW' FILE-SPEC,FILE-SPEC,...,SYS:FORLIB/LIB
IF LINK-10 IS USED, OR IF LOADER IS USED,
LOAD %H FILE-SPEC,FILE-SPEC,...,SYS:FORLIB/LIB
IF THE PROGRAM IS RUN ON A VIRTUAL MEMORY SYSTEM, AND FOROTS
HAS BEEN MODIFIED TO UNDERSTAND PAGING(AS IT HAS AT W.M.U.)
ALLCOR WILL ALLOCATE CORE IN THE FORM OF PAGES. THE PAGES
WILL HAVE ADDRESSES IMMEDIATELY ABOVE THE HIGH SEGMENT (IF
ONE EXISTS) BUT ARE CONSIDERED TO BE NON-CONTIGUOUS LOW SEGMENT
PAGES (WHICH IS WHY FOROTS HAS TO UNDERSTAND). THIS ALLOWS THE
USE OF THE SHAREABLE FOROTS, WHICH IMPROVES PERFORMANCE OF THE SYSTEM.
IF FOROTS HAS NOT BEEN MODIFIED, ALLCOR WILL BEHAVE AS THOUGH THE SYSTEM
WAS A NON-VIRTUAL MEMORY SYSTEM. NO SPECIAL LOADING INSTRUCTIONS
ARE NECESSARY IF THE PAGING FORM OF ALLCOR IS TO BE USED.
************************************************************************
ASSIGN
PURPOSE TO ASSIGN A NONSHARABLE DEVICE(SUCH AS CDR,LPT,CDP,ETC)
TO A USER'S JOB FROM WITHIN THE PROGRAM.
USAGE CALL ASSIGN(IDEV,IERR)
OR CALL ASSIGN(IDEV,IERR,NSECS)
WHERE IDEV: FORTRAN UNIT NUMBER OF DEVICE TO ASSIGN
OR ASCII NAME OF DEVICE
IERR: IS ERROR CODE
=0 GOT IT
=-1 NO SUCH DEVICE OR DEVICE CANNOT BE ASSIGNED.
NSECS: MAXIMUM NUMBER OF SECONDS TO WAIT FOR DEVICE
NOTE THAT PROGRAM WILL SLEEP UNTIL THE DEVICE CAN BE ASSIGNED
WHICH WILL BE INFINITE TIME IF DEVICE IS RESTRICTED.
************************************************************************
BLOCKT
PURPOSE TO MOVE A BLOCK (ARRAY OR VECTOR) FROM ONE AREA TO
ANOTHER IN LESS TIME THAN IT TAKES TO DO IT ONE WORD AT A TIME.
USAGE CALL BLOCKT(ARRAY1,ARRAY2,LENGTH)
WHERE ARRAY1: IS THE BLOCK (VECTOR OR ARRAY) TO BE TRANSFERRED.
ARRAY2: IS THE ARRAY WHERE ARRAY1 IS TO BE PUT.
LENGTH: IS THE NUMBER OF WORDS TO BE TRANSFERRED.
************************************************************************
BUSY
PURPOSE MAKE PROGRAM WAIT UNTIL SPECIFIED DEVICE IS AVAILABLE
TO PROGRAM.
USAGE CALL BUSY(IDEV)
WHERE: IDEV: FORTRAN UNIT NUMBER OF DESIRED DEVICE.
OR ASCII NAME OF DEVICE
NOTE THAT RESTRICTED DEVICES WILL ALWAYS APPEAR BUSY.
************************************************************************
CHKNAM
PURPOSE: CHECK LEGALITY OF A FILENAME. (OF USE PRIMARILY IN
CONVERSATIONAL PROGRAMMING WHERE INPUT PARAMETERS ARE ALWAYS
OF DOUBTFUL ACCURACY.
USAGE: CALL CHKNAM(NAME,IERR)
OR CALL CHKNAM(NAME,IERR,IEXT)
WHERE: NAME: IS FILENAME.EXT.(MUST BE AT LEAST A TWO WORD
QUANTITY.)
IERR: IS ERROR CODE.
IERR=0 VALID NAME.
IERR=-1 ILLEGAL NAME.
IEXT: (IF PRESENT) IS EXTENSION CODE.
IEXT=0 NULL EXTENSION
IEXT=-1 NON-NULL EXTENSION.
************************************************************************
CLOCK
PURPOSE TO DETERMINE EXACT TIME OF DAY IN HOURS (FROM MIDNITE),
MINUTES, SECONDS, AND CLOCK TICKS(1/60TH'S OF A SECOND).
ANSWER IN INTEGER FORM.
USAGE CALL CLOCK(IHOUR,IMIN,ISEC,ITICK)
WHERE IHOUR: HOUR OF DAY(24-HOUR TIME) FROM MIDNITE.
IMIN: MINUTE.
ISEC: SECOND.
ITICK: CLOCK TICK.
************************************************************************
DAY
PURPOSE TO DETERMINE YEAR, MONTH, AND DAY.
USAGE CALL DAY(IYEAR,IMONTH,IDAY)
WHERE IYEAR: INTEGER YEAR(RETURNED)
IMONTH: INTEGER MONTH(1-12)(RETURNED)
IDAY: INTEGER DATE OF MONTH.
************************************************************************
DEASSIGN
PURPOSE TO DEASSIGN A DEVICE WHICH IS ASSIGNED TO A USER'S
JOB, FROM WITHIN A PROGRAM.
USAGE CALL DEASSI(IDEV)
WHERE IDEV: FORTRAN UNIT NUMBER OR ASCII NAME OF DEVICE
TO DEASSIGN.
NOTE THAT IF DEVICE IS NOT ASSIGNED TO JOB, OR IF DEVICE IS
NOT DEASSIGNABLE, THIS ROUTINE IS A NO-OP.
NOTE ALSO THAT THIS ROUTINE DOES NOT WORK UNDER LEVEL-C MONITORS.
************************************************************************
DELETE
PURPOSE: TO DELETE FILES.
USAGE: SEE RENAMS.
************************************************************************
DEVCHR
PURPOSE TO DETERMINE THE CHARACTERISTICS OF A DEVICE.
USAGE CALL DEVCHR(IDEV,ICHAR)
WHERE IDEV: IS FORTRAN UNIT NUMBER OF DEVICE.
OR ASCII NAME OF DEVICE
AND ICHAR: IS RETURNED DEVICE CHARACTERISTICS, AS FOLLOWS:
BIT MEANING IF BIT IS SET
0 DECTAPE DIRECTORY IS IN CORE.
1 DEVICE IS A DISK.
2 DEVICE IS A CARD READER.
3 DEVICE IS A LINE PRINTER.
4 TTY ATTACHED TO JOB.
5 TTY IN USE AS A USER CONSOLE(EVEN IF DETACHED)
6 TTY IN USE AS I/O DEVICE.
7 DEVICE IS A DISPLAY.
8 DEVICE HAS A LONG DISPATCH TABLE(RECOGNIZES UUO'S
OTHER THAN INPUT,OUTPUT,CLOSE, AND RELEAS)
9 DEVICE IS A PAPER TAPE PUNCH.
10 DEVICE IS A PAPER TAPE READER.
11 DEVICE IS A DECTAPE.
12 DEVICE IS AVAILABLE TO THIS JOB OR ALREADY
ASSIGNED TO THIS JOB.
13 DEVICE IS A MAGNETIC TAPE.
14 DEVICE IS A TTY.
15 DEVICE HAS A DIRECTORY(DTA OR DSK)
16 DEVICE CAN DO INPUT.
17 DEVICE CAN DO OUTPUT.
18 DEVICE ASSIGNED BY CONSOLE COMMAND.
19 DEVICE ASSIGNED BY PROGRAM(INIT UUO)
REMAINING BITS IF BIT (35-N) CONTAINS A 1, THEN MODE N IS LEGAL
FOR THE DEVICE.
************************************************************************
DEVICE
PURPOSE: TO DETERMINE IF A JOB IS RUNNING FROM TELETYPE OR
BATCH,AND IF A SPECIFIED DEVICE IS ACTUALLY THE TELETYPE.
IF JOB IS NOT RUNNING FROM TELETYPE, OR DEVICE IS NOT TELETYPE,
TERMINATE PROGRAM.
THIS IS USEFUL IN CONVERSATIONAL PROGRAMS WHERE AN ILLEGAL
PARAMETER CAN BE CORRECTED FROM TELETYPE, BUT CANNOT UNDER
BATCH OR IF BEING ENTERED FROM SOME OTHER DEVICE THAN TELETYPE.
USAGE: CALL DEVICE(IDEV)
WHERE: IDEV: IS FORTRAN UNIT NUMBER OF INTEREST.
OR ASCII NAME OF DEVICE
************************************************************************
DEVTYP
PURPOSE TO FIND OUT ABOUT A DEVICE BY DOING A DEVTYP MONITOR CALL.
USAGE CALL DEVTYP(IDEV,ICHAR)
WHERE IDEV - IS FORTRAN UNIT NUMBER OF DEVICE OR ASCII DEVICE
NAME.
ICHAR - IS WORD RETURNED BY DEVTYP, AS FOLLOWS:
BIT MEANING
0 LOOKUP/ENTER MANDATORY.
1-11 RESERVED FOR FUTURE
12 DEVICE IS AVAILABLE TO THIS JOB.
13 SPOOLED ON DISK. (OTHER BITS REFLECT PROPERTIES OF
REAL DEVICE, EXCEPT VARIABLE BUFFER SIZE)
14 INTERACTIVE DEVICE (OUTPUT AFTER EACH BREAK CHARACTER)
15 CAPABLE OF VARIABLE BUFFER SIZE (USER CAN SET HIS OWN
BUFFER LENGTHS)
16 CAPABLE OF INPUT
17 CAPABLE OF OUTPUT
18-26 JOB NUMBER THAT CURRENTLY HAS DEVICE ASSIGNED OR INITED
27-28 RESERVED FOR THE FUTURE
29 DEVICE IS A RESTRICTED DEVICE (I.E., CAN ONLY BE ASSIGNED
BY A PRIVILEGED JOB OR THE MOUNT COMMAND)
30-35 DEVICE TYPE CODE (OCTAL)
CODE MNEMONIC MEANING
0 DSK DISK OF SOME SORT
1 DTA DECTAPE
2 MTA MAGNETIC TAPE
3 TTY TTY OR EQUIVALENT
4 PTR PAPER-TAPE READER
5 PTP PAPER-TAPE PUNCH
6 DIS DISPLAY
7 LPT LINE PRINTER
10 CDR CARD READER
11 CDP CARD PUNCH
12 PTY PLOTTER
13 PLT PLOTTER
14 EXT EXTERNAL TASK
15 MPX SOFTWARE MPX
16 PAR PA611R ON DC44
17 YCR PC11(R) ON DC44
20 PAP PA611P ON DC44
21 LPC LPC-11 ON DC44
22 PCP PC-11(P) ON DC44
23-57 RESERVED FOR DIGITAL
60-77 RESERVED FOR CUSTOMER
************************************************************************
DISMOUNT
PURPOSE: TO PERFORM THE FUNCTION OF THE MONITOR COMMAND DISMOUNT
AS A SUBROUTINE.
USAGE: CALL DISMOUNT(LOGNAM,IERR)
WHERE: LOGNAM - IS THE LOGICAL OR PHYSICAL NAME OF THE
DEVICE TO BE DISMOUNTED.
IERR - IS AN ERROR CODE.
VALUE MEANING
0 DISMOUNT SUCCESSFUL. NO ERRORS.
1 DEVICE NAME IS ILLEGAL OR DEVICE DOES NOT
EXIST.
-1 DISMOUNT WAS UNSUCCESSFUL FOR SOME UNKNOWN
REASON.
NOTE: A /REMOVE IS IMPLIED IN ALL CALLS TO THIS ROUTINE.
************************************************************************
DROTATE
PURPOSE: TO ROTATE A DOUBLE WORD QUANTITY.
USAGE CALL DROTATE(WORD,IPLACE,WORD1)
WHERE WORD IS DOUBLE WORD TO BE ROTATED.
IPLACE IS NUMBER OF PLACES TO ROTATE WORD.
IF IPLACE IS POSITIVE, ROTATE LEFT, IF NEGATIVE,
ROTATE RIGHT.
WORD1 IS DOUBLE WORD RESULT.
************************************************************************
DSHIFT
PURPOSE TO LOGICAL SHIFT A DOUBLE WORD QUANTITY.
USAGE CALL DSHIFT(WORD,IPLACE,WORD1)
WHERE WORD IS DOUBLE WORD QUANTITY TO BE SHIFTED.
IPLACE IS NUMBER OF PLACES TO SHIFT.
IF IPLACE IS POSITIVE, SHIFT LEFT, IF NEGATIVE,
SHIFT RIGHT.
WORD1 IS DOUBLE WORD RESULT.
************************************************************************
DTRNAC
PURPOSE: TO RANDOM ACCESS A DECTAPE FOR INPUT AND OUTPUT.
USAGE: CALL DTRNAC(N,A,IA,IDTA,NWORDS)
WHERE: N: FIRST PHYSICAL BLOCK NUMBER DESIRED. 0<N<578.
IF ATTEMPT IS MADE TO ACCESS AN ILLEGAL BLOCK
NUMBER PROGRAM WILL ABORT.
A: DATA MATRIX.
IA: CODE FOR I/O.(1 FOR INPUT, 2 FOR OUTPUT)
IDTA: FORTRAN DEVICE NUMBER OF DTA.
NWORDS: NUMBER OF WORDS IN USER RECORD.
NOTE THAT SINCE THIS PROGRAM INDEXES ON PHYSICAL BLOCK NUMBER, NO
ATTENTION CAN BE PAID TO ANY PRE-EXISTING FILE STRUCTURE ON THE TAPE!
THEREFORE, THIS PROGRAM SHOULD ONLY BE USED WHERE IT'S FILE IS
SOLE OCCUPANT OF THE TAPE!
NOTE THAT ONE PHYSICAL BLOCK CONTAINS 128 WORDS, BUT THAT A RECORD MAY
CONTAIN MORE THAN ONE BLOCK.
************************************************************************
DYTIME
PURPOSE: FIND DAYTIME IN MILLISECONDS.
USAGE: CALL DYTIME(ITIME)
WHERE: ITIME: IS TIME OF DAY RETURNED IN MILLISECONDS.
************************************************************************
ECHO
PURPOSE: TO TURN ECHOING OF CHARACTERS ON THE TELETYPE ON OR OFF
SO THAT NON-PRINTING INFORMATION CAN BE ENTERED.
USAGE: CALL ECHO(ICMD)
WHERE: ICMD - IS A SWITCH SPECIFYING ECHO ON OR ECHO OFF.
VALUE MEANING
0 TURN ECHO ON
1 TURN ECHO OFF
NOTE: A CARRIAGE RETURN DOES NOT GENERATE A LINE-FEED WHEN
ECHO IS TURNED OFF, SO THIS MUST BE ALLOWED FOR
BY THE CALLING PROGRAM.
************************************************************************
EXIST
PURPOSE: TO CHECK TO MAKE SURE THAT A GIVEN FILENAME EXISTS ON
DISK AND IS READABLE.
USAGE: CALL EXIST(NAME,IERR)
OR CALL EXIST(NAME,IERR,IPROJ,IPROG)
OR CALL EXISTS(IDEV,NAME,IERR)
OR CALL EXISTS(IDEV,NAME,IERR,IPROJ,IPROG)
WHERE IDEV: FORTRAN UNIT NUMBER OR ASCII DEVICE NAME
TO CHECK ON. IF NO SUCH DEVICE, USE 'DSK'.
NAME: NAME OF FILE AND EXTENSION. MUST BE A TWO
WORD QUANTITY.
IERR: ERROR CODE.
IERR=0 FILE EXISTS AND NAME IS LEGAL.
IERR=-1 NAME IS ILLEGAL.
IERR=1 FILE NOT FOUND OR NOT READABLE.
IPROJ: (IF PRESENT) PROJECT NUMBER.
IPROG: (IF PRESENT) PROGRAMMER NUMBER.
CALLS TO EXISTS ARE PREFERABLE, SINCE DEVICE MAY BE OTHER THAN DSK.
************************************************************************
FNDSPC
PURPOSE: TO FIND THE FILE STRUCTURE WITH THE MOST FREE SPACE AVAILABLE
TO THIS USER. AVAILABLE MEANS THAT THE STRUCTURE IS WRITEABLE
AND THAT THE SPACE IS LESS THAN OR EQUAL TO THE USERS LOGGED-IN
(FCFS) DISK QUOTA.
USAGE: CALL FNDSPC(STRNAM,IFREE)
WHERE STRNAM - IS THE ASCII NAME OF THE STRUCTURE RETURNED
BY THE SUBROUTINE.
IFREE - IS THE AMOUNT OF SPACE AVAILABLE TO THE USER
ON THE STRUCTURE AT THE TIME OF THE CALL.
************************************************************************
GETBYT
PURPOSE: TO GET AN ARBITRARY BYTE FROM A WORD (SIMULATE AN
LDB INSTRUCTION).
USAGE CALL GETBYT(SRCWD,IBYTE,ISIZE,IRMOST,IERR)
WHERE
SRCWD - WORD TO GET BYTE OUT OF
IBYTE - WORD TO PUT BYTE INTO
ISIZE - SIZE OF BYTE (1 TO 36)
MUST NOT BE GREATER THAN IRMOST+1
IRMOST - POSITION OF RIGHTMOST BIT OF BYTE (0 TO 35)
IERR - ERROR CODE. NON-ZERO IF ARGUMENTS ARE ILLEGAL
************************************************************************
GETCHR
PURPOSE: TO UNPACK A CHARACTER FROM WITHIN A PACKED WORD(S)
AND LEFT JUSTIFY IT IN A WORD.
USAGE: CALL GETCHR(WORD,IBYTE,CHAR)
WHERE WORD: PACKED WORD(S).
IBYTE: BYTE NUMBER IN PACKED WORD(S).
CHAR: UNPACKED CHARACTER.
************************************************************************
GETPPN
PURPOSE FIND OUT THE PROJECT PROGRAMMER NUMBER OF THE USER
RUNNING THE JOB.
USAGE CALL GETPPN(IPROJ,IPROG)
WHERE IPROJ: PROJECT NUMBER(IN OCTAL) RETURNED.
IPROG: PROGRAMMER NUMBER(IN OCTAL) RETURNED.
************************************************************************
GTCORE
PURPOSE: TO ALLOCATE CORE IN THE LOW SEGMENT DYNAMICLY USING
FOROTS. THIS IS DESIREABLE SINCE IT PERMITS USE OF THE
SHAREABLE FOROTS HIGH SEGMENT.
USAGE: CALL GTCORE(IWORDS,BASE,IOFFST,IERR)
OR: CALL GTCORE(IWORDS,BASE,IOFFST,IERR,IRESV)
WHERE
IWORDS - NUMBER OF WORDS OF CORE TO ALLOCATE.
BASE - ARRAY RELATIVE TO WHICH ALLOCATED CORE IS TO
BE ADDRESSED.
IOFFST - BASE OFFSET INTO ARRAY TO GET FIRST ALLOCATED
WORD.
IERR - ERROR CODE.
VALUE MEANING
0 NO ERROR. CORE ALLOCATED.
-1 INSUFFICIENT CORE.
1 INSUFFICIENT CORE TO ALLOCATED RESERVE.
IWORDS ALLOCATED.
IRESV - NUMBER OF WORDS TO RESERVE FOR FOROTS (IN ONE CHUNK)
THIS ARGUMENT IS OPTIONAL.
NOTES: THIS CORE ALLOCATION ROUTINE IS USED SIMILARY TO ALLCOR. HOWEVER,
CORE IS ALLOCATED IN THE LOW SEGMENT, AND MUST BE GIVEN BACK TO
FOROTS BEFORE A IT CAN BE REALLOCATED. ADDITIONAL ALLOCATIONS
MAY BE MADE INDEPENDENTLY, BUT THE OFFSET OF EACH MUST
BE REMEMBERED SO THAT THE CORE MAY BE RETURNED. FREQUENT REALLOCATIONS
SHOULD BE AVOIDED, SINCE CORE MAY BECOME FRAGMENTED MAKING IT
IMPOSSIBLE TO GET THE DESIRED AMOUNT OF CORE IN ONE BLOCK.
THIS ROUTINE WORKS WELL WITH CHAINB, BUT NOT WITH LINK-OVERLAYS.
THIS IS BECAUSE LINK-OVERLAYS DO NOT PREALLOCATE THEIR CORE
AND THE CORE REQUIRED FOR A NON-RELOCATABLE OVERLAY MAY BE TAKEN
BY GTCORE, MAKING THE PROGRAM NON-RUNNABLE.
THIS PROBLEM CAN BE REDUCED BY ENSURING THAT THE LARGEST OVERLAY
IS IN CORE WHENEVER GTCORE IS CALLED. IF THIS IS DONE, THE SITUATION
WILL REDUCE TO APPROXIMATELY WHAT IT WOULD BE IF GTCORE WERE
NOT BEING USED. HOWEVER, THE PROGRAM MAY STILL BOMB BECAUSE
FOROTS HAS TAKEN CORE THAT AN OVERLAY NEEDS.
************************************************************************
JOBNUM
PURPOSE TO DETERMINE JOB NUMBER OF USER'S JOB.
USAGE CALL JOBNUM(IJOB)
WHERE IJOB: INTEGER JOB# (RETURNED)
************************************************************************
LSCORE
PURPOSE: TO RETURN CORE ALLOCATED BY GTCORE TO FOROTS FOR REUSE.
USAGE: CALL LSCORE(BASE,IOFFST)
WHERE
BASE - IS ARRAY RELATIVE TO WHICH THE CORE IS ADDRESSED.
IOFFST - IS THE OFFSET INTO THE ARRAY THAT POINTS TO THE
FIRST ALLOCATED WORD
************************************************************************
MAXIMUM
PURPOSE: TO FIND MAXIMUM ELEMENT IN ONE-DIMENSIONAL ARRAY(FIXED
POINT OR SINGLE PRECISION FLOATING POINT.)
USAGE CALL MAXIMUM(ARRAY,NUM,ANS)
WHERE ARRAY IS LIST TO PICK MAXIMUM OUT OF.
NUM IS SIZE OF ARRAY TO LOOK AT.
ANS IS MAXIMUM ELEMENT IN ARRAY.
(SAME VARIABLE TYPE AS ARRAY)
************************************************************************
MAXWYT
PURPOSE: LIMIT AMOUNT OF TIME PROGRAM WILL WAIT FOR USER TO TYPE
IN AN ANSWER. IS OF USE PRIMARILY IN CONVERSATIONAL INSTRUCTION
PROGRAMS WHERE IT MAY BE ASSUMED THAT NO ANSWER INDICATES
PERPLEXITY OR SOME OTHER DIFFICULTY.
USAGE: CALL MAXWYT(ITIME,IERR)
WHERE: ITIME: IS TIME LIMIT FOR WAIT IN SECONDS.
IERR: IS ERROR CODE.
IERR=0. LINE ENTERED IN TIME. GO AHEAD
AND READ IT.
IERR=1. NO LINE ENTERED IN TIME LIMIT.
TAKE APPROPRIATE ALTERNATE ACTION.
NOTE: USUAL FORM OF USE IS TO ASK A QUESTION, CALL MAXWYT,
CHECK IERR TO SEE IF USER RESPONDED IN TIME, TAKE
APPROPRIATE ACTION.
************************************************************************
MINIMUM
PURPOSE: TO FIND MINIMUM ELEMENT IN ONE-DIMENSIONAL ARRAY(FIXED
POINT OR SINGLE PRECISION FLOATING POINT.)
USAGE CALL MINIMUM(ARRAY,NUM,ANS)
WHERE ARRAY IS LIST TO PICK MINIMUM OUT OF.
NUM IS SIZE OF ARRAY TO LOOK AT.
ANS IS MINIMUM ELEMENT IN ARRAY.
(SAME VARIABLE TYPE AS ARRAY)
************************************************************************
MINVSQ
PURPOSE: INVERT A GENERAL SQUARE MATRIX.
USAGE: CALL MINVSQ(A,N,TOL,MC,MR,NDIM,IO,METHOD,DET,IEXP)
WHERE: A: IS MATRIX TO BE INVERTED.
N: NUMBER OF ROWS(COLUMNS) IN MATRIX A.
TOL: TOLERANCE FOR INVERSE(IF LARGEST
AVAILABLE PIVOT(IN ABS.)IS LESS THAN
.000001*TOL, INVERSE IS CONSIDERED
NONEXISTANT.(TYPICAL CHOICE FOR TOL IS 1.)
MC: BOOK-KEEPING VECTOR(AT LEAST N LONG)
MR: BOOK-KEEPING VECTOR(AT LEAST N LONG)
NDIM: DIMENSION OF MATRIX A IN MAINLINE.
I.E. A(NDIM,NDIM)
IO: FORTRAN UNIT NUMBER FOR ERROR MESSAGES.
IF IO=0, ERROR MESSAGES ARE SUPPRESSED.
METHOD: SWITCH FOR SELECTING PIVOT METHOD.
=0 LEAST ACCURATE(FASTEST)USES FIRST NONZERO.
=1 COMPROMISE.USES LARGEST REMAINING IN ROW.
=2 MOST ACCURATE(SLOWEST)USE LARGEST REMAINING IN MATRIX.
DET: DETERMINENT OF MATRIX A(CHARACTERISTIC ONLY).
IEXP: POWER OF TEN OF DETERMINENT.
DETERMINENT=DET*10**IEXP
NOTE: INVERSE MATRIX IS RETURNED IN A.
************************************************************************
MOUNT
PURPOSE: TO PERFORM SOME OF THE FUNCTIONS OF THE MONITOR MOUNT
COMMAND AS A SUBROUTINE.
USAGE: CALL MOUNT(DEV,LOGNAM,LOCK,VID,PHYNAM,IERR)
OR CALL MOUNT(DEV,LOGNAM,LOCK,VID,PHYNAM,IERR,REELID)
WHERE: DEV - IS THE NAME OF THE DEVICE TO BE MOUNTED.
THE DEVICE MAY BE EITHER SPECIFIC (E.G. MTA1)
OR GENERIC (E.G. DTA). THE DEVICE MAY NOT BE A
FILE STRUCTURE OR A TTY. POSSIBLE DEVICES INCLUDE
DTA, MTA, LPT, CDP, CDR, PTP, PTR, ETC.
LOGNAM - IS THE LOGICAL NAME TO GIVE TO THE DEVICE.
IT MUST NOT ALREADY REFER TO A DEVICE.
LOCK - IS A SIGNAL WHETHER THE USER WANTS THE DEVICE
TO BE WRITE LOCKED OR WRITE ENABLED. THIS IS
VALID ONLY FOR DECTAPE AND MAGTAPE.
VALUE MEANING
0 WRITE LOCKED
1 WRITE ENABLED
VID - VISUAL IDENTIFICATION STRING, CONSISTING OF UP
TO 25 LETTERS, DIGITS, PERIODS, AND HYPHENS
TERMINATED BY A BLANK OR UP TO 50 CHARACTERS
ENCLOSED IN QUOTES (EITHER SINGLE OR DOUBLE).
PHYNAM - THE PHYSICAL NAME OF THE DEVICE OBTAINED, IF
ANY, SUCH AS MTA1, OR DTA0. THIS SHOULD BE A
DOUBLE PRECISION VARIABLE, SINCE 510/602
USE SIX CHARACTER DEVICE NAMES. IF THE VARIABLE
IS SINGLE PRECISION AND THE DEVICE NAME IS
SIX CHARACTERS, ONLY FIVE WILL BE RETURNED,
AND NO WARNING WILL BE GIVEN.
OF FIVE CHARACTERS.
IERR - IS AN ERROR CODE.
VALUE MEANING
0 MOUNT SUCCESSFUL. NO ERRORS.
1 DEV DOES NOT EXIST OR IS NOT RECOGNIZED.
2 LOGNAM IS ALREADY IN USE, OR IS ZERO.
3 NO MOUNT JOB IS RUNNING TO PROCESS
THE REQUEST.
4 DEVICE IS NOT AVAILABLE.
-1 MOUNT UNSUCCESSFUL FOR UNKNOWN REASON.
REELID - REELID ID OF DESIRED TAPE. VALID FOR MAGTAPE ONLY
THIS ARGUMENT IS OPTIONAL.
************************************************************************
PEEK
PURPOSE TO EXAMINE A LOCATION IN THE MONITOR.
USAGE CALL PEEK(IEXEC,IWORD)
WHERE IEXEC: IS ADDRESS TO EXAMINE(USUALLY IN OCTAL)
IWORD: IS CONTENTS OF IEXEC
NOTE THAT THIS SUBROUTINE IS PRIVILEGED AND WILL NOT RETURN
THE CORRECT CONTENTS UNLESS THE CORRECT PRIVILEGE BIT IS SET
FOR THE USER'S PROJECT-PROGRAMMER NUMBER IN ACCT.SYS.
(IT MAY NOT BE PRIVILEGED IN SOME LEVEL C SYSTEMS.)
************************************************************************
PRINTS
PURPOSE: TO ENTER A FILE IN THE PRINT QUEUE WITHOUT EXITING
FROM THE PROGRAM.
USAGE: CALL PRINTS(FILENAME,IDISP,IFORM,ICOPYS)
OR: CALL PRINTS(FILENAME,IDISP,IFORM,ICOPYS,ILIMIT)
WHERE FILENAME: IS THE ASCII NAME OF THE FILE TO BE PRINTED.
THIS MUST BE A TWO WORD QUANTITY.
IDISP: DISPOSITION CODE.
0 = SAVE THE FILE
1 = PRINT THE FILE AND THEN DELETE IT
2 = RENAME THE FILE INTO [3,3], AND
DELETE IT AFTER PRINTING.
IFORM: FORMAT CODE.
0 = NOT FORTRAN FORMATTED OUTPUT
1 = FORTRAN FORMATTED OUTPUT
ICOPYS: NUMBER OF COPIES OF THE FILE TO PRINT.
THIS MUST BE BETWEEN 1 AND 63 INCLUSIVE.
ILIMIT: OPTIONAL ARGUMENT FOR SPECIFYING PAGE LIMIT
FOR THE PRINTOUT. IF THIS IS OMITTED, THE
DEFAULT IS (FILESIZE*ICOPYS)+21
************************************************************************
PROTEK
PURPOSE: TO PROTECT A NEWLY CREATED FILE FROM WITHIN THE FORTRAN
PROGRAM, SO THAT IT WILL NOT BE LOST IF SOMETHING GOES WRONG
LATER.
USAGE: SEE RENAMS.
************************************************************************
PUTBYT
PURPOSE: TO PUT AN ARBITRARY BYTE INTO A WORD SIMULATE A
DPB INSTRUCTION).
USAGE CALL PUTBYT(DSTWD,IBYTE,ISIZE,IRMOST,IERR)
WHERE
DSTWD - WORD TO PUT THE BYTE IN
IBYTE - WORD TO DPB FROM
ISIZE - SIZE OF BYTE (1 TO 36)
MUST NOT BE GREATER THAN IRMOST+1
IRMOST - POSITION OF RIGHTMOST BIT OF BYTE (0 TO 35)
IERR - ERROR CODE. NON-ZERO IF ARGUMENTS ARE ILLEGAL
************************************************************************
PUTCHR
PURPOSE: TO PACK A CHARACTER INTO A PACKED WORD(S) TO SAVE SPACE.
USAGE: CALL PUTCHR(WORD,IBYTE,CHAR)
WHERE WORD: IS PACKED WORD(S).
IBYTE: IS BYTE NUMBER.
CHAR: CHARACTER TO BE PACKED(LEFT JUSTIFIED.)
************************************************************************
QUEOUT
PURPOSE: TO ENTER A FILE IN AN OUTPUT QUEUE WITHOUT EXITING
FROM THE PROGRAM.
USAGE CALL QUEOUT(DEVICE,FILENAME,QUE,VECTOR,IERR)
WHERE
DEVICE - IS DEVICE FILE IS ON. (MUST BE SOME KIND OF DSK)
FILENAME - IS TWO WORD ASCII FILENAME TO OUTPUT
QUE - IS ASCII NAME OF QUEUE TO PUT FILE IN
(MAY BE LPT, CDP, PTP, OR PLT)
IERR - IS ERROR CODE
VALUE MEANING
0 OK
1 UNDEFINED QUE
2 ILLEGAL DEVICE
3 ILLEGAL FILE NAME
4 NO SUCH FILE
5 ILLEGAL ARGUMENT IN VECTOR
6 CANNOT OPEN QUE DEVICE
7 CANNOT ENTER QUEUE COMMAND FILE
VECTOR - IS A FOURTEEN(14) WORD INTEGER ARRAY OF ARGUMENTS
VECTOR(1) /FILE: ARGUMENT
1=ASCII (DEFAULT)
2=FORTRAN DATA
3=COBOL (I.E. SIXBIT)
4=CREF(NOT IMPLEMENTED. ASSUMES ASCII)
5=RUNOFF(NOT IMPLEMENTED. ASSUMES ASCII)
6=ELEVEN
VECTOR(2) /LIMIT: ARGUMENT
VECTOR(3) /COPIES:N (FROM 1 TO 63)
VECTOR(4) /DISP:
1=PRESERVE
2=RENAME
3=DELETE
VECTOR(5) AFTER SWITCH PART ONE
TIME OF DAY OR PLUS TIME IN MINUTES
PLUS TIME IS INDICATED BY A NEGATIVE IN VECTOR(6)
VECTOR(6) AFTER SWITCH PART TWO
DATE IN 15 BIT FORMAT OR ZERO FOR TODAY
NEGATIVE INDICATES TIME IS PLUS FORMAT
VECTOR(7) DEADLINE SWITCH PART ONE. SAME AS AFTER
VECTOR(8) DEADLINE SWITCH PART TWO. SAME AS AFTER
VECTOR(9) /PRIORITY:(N+1)
GIVE NUMBER IN RANGE 1 TO 63. ACTUAL
PRIORITY IS ONE LESS. DEFAULT IS 10
VECTOR(10) /PAPER: ARGUMENT
THIS SWITCH IS ALSO REFERED TO AS
/PRINT FOR LPT, /PUNCH FOR CDP,
/TAPE FOR PTP, AND /PLOT FOR PLT.
VALUE MEANING
LPT CDP PTP PLT
1 ARROW(*) ASCII(*) ASCII(*) IMAGE
2 ASCII 026 IMAGE ASCII(*)
3 OCTAL BINARY IMG BIN BINARY
4 SUPPRESS D029 BINARY
5 IMAGE
NOTE THAT THE DEFAULT MODE ON LPT IS ARROW;
ON OTHER DEVICES IT DEPENDS UPON THE MODE
OF THE FILE. THE DEFAULTS FOR ASCII FILES
ARE STARRED.
VECTOR(11) /HEAD:N
0=NO HEADER
1=FILE HEADER
VECTOR(12) /SPACING: ARGUMENT
1=SINGLE
2=DOUBLE
3=TRIPLE
VECTOR(13) /FORMS:NAME
FIRST FIVE CHARACTERS
VECTOR(14) REMAINING CHARACTER TO FORMS NAME
ASCII NAME OF SPECIAL FORMS TO USE
NOTE: QUEOUT DOES NOT SUPPORT GALAXY-10.
************************************************************************
REASSIGN
PURPOSE TO TRANSFER A NONSHAREABLE DEVICE WHICH IS ASSIGNED
TO A USER'S JOB TO SOME OTHER JOB, WITHOUT PASSING IT THROUGH
THE MONITOR RESOURCES POOL, AND UNDER PROGRAM CONTROL.
USAGE CALL REASSI(IDEV,IJOB,IERR)
WHERE IDEV: FORTRAN UNIT NUMBER OF DEVICE TO REASSIGN
OR ASCII DEVICE NAME
IJOB: NUMBER OF JOB TO REASSIGN IT TO
IERR: ERROR CODE
=0 SUCCESSFULLY REASSIGNED
=-1 DEVICE DOES NOT EXIST, CANNOT BE REASSIGNED
(SUCH AS TTY),OR IS NOT ASSIGNED TO USER
CALLING THIS SUBROUTINE; OR IJOB IS NOT
INITIALIZED.
************************************************************************
REDTTY
PURPOSE: TO READ TTY PARAMETERS OF CONTROLLING TTY.
USAGE: CALL REDTTY(IFUNCT,IVAL,IERR)
WHERE IFUNCT - FUNCTION TO READ
IVAL - VALUE OF PARAMETER
IERR - ERROR CODE
VALUE MEANING
0 ALL OK
-1 JOB NOT ON A TTY
1 FUNCTION NOT IMPLEMENTED
2 PRIVILEGED FUNCTION
3 ARGUMENT OUT OF RANGE
>=4 OTHER ERRORS
DESCRIPTION OF FUNCTIONS (SEE ALSO TRMOP. IN MONITOR CALLS MANUAL)
NUMBER RANGE DESCRIPTION CORRESPONDING SET
(OCTAL)
0 1 BIT OUTPUT IN PROGRESS NO
1 1 BIT TERMINAL AT MONITOR MODE NO
2 1 BIT PAPER TAPE MODE YES
3 1 BIT LOWER CASE(0=YES, 1=NO) YES
4 1 BIT SLAVE SWITCH YES*
5 1 BIT TAB SWITCH (0 IF SPACES,
1 IF TAB) YES
6 1 BIT FORM SWITCH (0 IF LINEFEED,
1 IF FORMFEED) YES
7 1 BIT LOCAL COPY SWITCH
(NO ECHO IF SET) YES
10 1 BIT FREE CR-LF SWITCH
(NO CR-LF IF SET) YES
11 0 TO 255 HORIZONTAL POSITION OF
CARRIAGE NO
12 16 TO 200 CARRIAGE WIDTH YES
13 1 BIT TTY NO GAG BIT YES
14 1 BIT HALF-DUPLEX LINE YES*
15 1 BIT REMOTE LINE YES*
16 1 BIT DISPLAY TERMINAL YES*
17 0 TO 3 FILLER CLASS YES
20 1 BIT PAPER TAPE ENABLED YES
21 1 BIT TTY PAGE BIT YES
22 1 BIT SUSPENDED OUTPUT (NEED XON
TO RESUME) UNIMPLEMENTED YES
23 0 TO 63 PAGE SIZE IN LINES
UNIMPLEMENTED YES
24 0 TO 63 PAGE COUNTER (LINES OUTPUT
ON THIS PAGE) UNIMPLEMENTED YES
25 1 BIT TTY NO BLANK BIT YES
26 1 BIT TTY NO ALTMODE BIT YES
27 1 BIT APL MODE YES
30 SEE MANUAL RECEIVE SPEED YES
31 SEE MANUAL TRANSMIT SPEED YES
32 1 BIT DEBREAK YES
33 1 BIT LINE IS 2741 YES*
34 1 BIT TIDY NO
35 1 BIT AUTO CR BIT YES
36 1 BIT RTCOMPATIBILITY SETTING YES
37 SEE MANUAL PIM MODE BREAK SET YES
(*) MEANS SET IS PRIVILEGED.
************************************************************************
RENAME
PURPOSE: TO CHANGE THE NAME OF AN EXISTING FILE TO SOME NEW
NAME.
USAGE: SEE RENAMS.
************************************************************************
RENAMS
PURPOSE RENAME,DELETE, AND/OR PROTECT FILES ON ANY DEVICE AVAILABLE.
USAGE CALL DELETE(NAME1)
CALL RENAME(NAME1,NAME2)
CALL PROTEK(IPROT,NAME1)
CALL RENAMS(IDEV,IFUNCT,NAME1,NAME2,IPROT)
WHERE NAME1 FILENAME.EXT CURRENTLY EXISTING, ON WHICH
SPECIFIED ACTION IS TO BE PERFORMED.
MUST BE AT LEAST A TWO WORD QUANTITY, WRITTEN
EXACTLY AS SHOULD APPEAR.
NAME2 FILENAME.EXT TO GIVE TO FILE OF NAME1.
NAME MUST MEET SAME REQUIREMENTS.
IPROT OCTAL PROTECTION CODE DESIRED.
IDEV FORTRAN UNIT NUMBER, OR ASCII DEVICE NAME
IFUNCT FUNCTION TO BE PERFORMED.
1: DELETE
2: PROTECT
3: RENAME
4: RENAME AND PROTECT
5: RENAME, EVEN IF A FILE OF NAME2 ALREADY EXISTS.
6: RENAME AND PROTECT, EVEN IF A FILE OF NAME2
ALREADY EXISTS.
NOTE: IF DEVICE IDEV DOES NOT EXIST, DSK WILL BE TRIED.
NOTE: IF NAME1 IS NOT FOUND, AND EXTENSION IS NULL, AN
EXTENSION OF DAT WILL BE TRIED.
NOTE: THE GENERAL CALL TO RENAMS IS PREFERRED OVER THE OBSOLETE
CALLS TO DELETE,PROTEK, AND RENAME, WHICH IT HANDLES IN
GENERAL AND WITHOUT LIMITATION TO DEVICE DSK.
NOTE: IF FILE NAME1 IS CURRENTLY OPEN, IT MUST BE CLOSED.(I.E. IF
WRITING IT, ENDFILE; IF READING IT, CALL RELEASE(N) WHERE N
IS FORTRAN DEVICE NUMBER.)
************************************************************************
RESTART
PURPOSE RESTART A PROGRAM FROM ANY POINT WITHIN PROGRAM,
SUBROUTINE TO PROGRAM, ETC.
(RESTART IS AT BEGINNING OF PROGRAM.)
USAGE: CALL RESTART
WARNING: PROGRAM WILL RELEASE ALL DEVICES ON RESTART,AND ANY FILES NOT
CLOSED MAY BE LOST.
************************************************************************
RNTIME
PURPOSE: TO FIND TOTAL RUNTIME OF YOUR JOB UP TO PRESENT TIME.
FREQUENTLY CALLED BEFORE AND AFTER A SEGMENT OF A PROGRAM WHOSE
EXECUTION TIME IS OF INTEREST.(EXECUTION TIME=RUNTIME AFTER-
RUNTIME BEFORE)
USAGE: CALL RNTIME(ITIME)
WHERE: ITIME: IS TOTAL RUNTIME OF JOB UP TO PRESENT TIME IN
MILLISECONDS.
************************************************************************
ROTATE
PURPOSE TO ROTATE A SINGLE WORD QUANTITY.
USAGE CALL ROTATE(WORD,IPLACE,WORD1)
WHERE WORD IS WORD TO BE ROTATED.
IPLACE IS NUMBER OF PLACES TO ROTATE.
IF IPLACE IS POSITIVE, ROTATE LEFT, IF NEGATIVE,
ROTATE RIGHT.
WORD1 RESULTANT WORD.
************************************************************************
RUNUUO
PURPOSE TO ALLOW ONE PROGRAM TO TRANSFER CONTROL TO
ANOTHER PROGRAM, SUCH AS BY GIVING A RUN,R,EXECUTE,ETC.
COMMAND.
USAGE CALL RUNUUO(COMMAND)
WHERE COMMAND: ASCII COMMAND STRING, 200 CHARACTERS
OR LESS, EXACTLY AS IT WOULD APPEAR NORMALLY; MUST END WITH A
ZERO WORD. ( IF COMMAND STRING IS A LITERAL ENCLOSED IN QUOTES
IN CALL STATEMENT, WILL DO SO AUTOMATICALLY.)
VALID COMMANDS ARE: R,RUN,EXECUTE,DEBUG,LOAD,COMPILE,MAKE,
TECO,CREATE,EDIT,RENAME,DELETE,TYPE,LIST,COPY,PRESERVE,
PROTECT,REWIND,UNLOAD,ZERO,SKIP,BACKSPACE,EOF,LABEL
AND THEIR STANDARD ABBREVIATIONS, WITH ALL NORMALLY LEGAL
SWITCHES.
IMPORTANT CONSIDERATIONS:
1) CONTROL CAN NOT BE RETURNED TO CALLING PROGRAM. IF IT IS
NECESSARY TO RETURN TO CALLING PROGRAM, CALLED PROGRAM MUST DO
SO BY CALLING RUNUUO AGAIN, AND REENTRY WILL BE AT START OF
PROGRAM.
2) ANY OPEN OUTPUT FILE MAY BE DESTROYED, AS ALL DEVICES ARE
RELEASED. THEREFORE, ANY FILES WHICH MUST BE TRANSMITTED
SHOULD BE CLOSED.(FORTRAN IV ENDFILE)
3) NO SEGMENTS ARE RETAINED IN THE CONTROL TRANSFER.
4) CANNOT RESTART CALLING PROGRAM, EVEN IF ERROR OCCURS IN CALL
PROCEDURE.
************************************************************************
SETTTY
PURPOSE: TO SET TTY PARAMETERS.
USAGE: CALL SETTTY(IFUNCT,IVAL,IERR)
WHERE IFUNCT - FUNCTION TO SET
IVAL - VALUE TO SET IT TO
IERR - ERROR CODE
FOR DESCRIPTIONS OF IFUNCT AND IERR, SEE SECTION ON REDTTY
************************************************************************
SHIFT
PURPOSE TO LOGICAL SHIFT A SINGLE WORD QUANTITY.
USAGE CALL SHIFT(WORD,IPLACE,WORD1)
WHERE WORD IS WORD TO BE LOGICAL SHIFTED.
IPLACE IS NUMBER OF PLACES TO SHIFT.
IF IPLACE IS POSITIVE, SHIFT LEFT, IF NEGATIVE,
SHIFT RIGHT.
WORD1 IS RESULTANT WORD.
************************************************************************
SLEEP
PURPOSE TO FORCE JOB TO SLEEP.
USAGE CALL SLEEP(ISEC)
WHERE ISEC: MINIMUM NUMBER OF SECONDS TO SLEEP.(MAY SLEEP
LONGER)(INTEGER.)
************************************************************************
SORT
PURPOSE: TO SORT AN ARRAY OR MATRIX BY ONE OR MORE SORT FIELDS
OF DECREASING MAJORITY.
USAGE: CALL SORT(IA,N,JA,ISF,IFIELD,IW,IB,ITAG)
WHERE: IA: IS MATRIX(OR ARRAY) TO BE SORTED.
N: NUMBER OF ROWS FILLED IN MATRIX.
JA: NUMBER OF COLUMNS FILLED IN MATRIX.
ISF: NUMBER OF SORT FIELDS.
IFIELD: VECTOR TELLING WHICH COLUMN IS MOST MAJOR, NEXT
MOST,ETC.(MUST HAVE AT LEAST ISF ELEMENTS.)
IW: NUMBER OF ROWS DIMENSION IN MATRIX.
IB: WORKING STORAGE(AT LEAST 3N/2)
ITAG: WORKING STORAGE(AT LEAST N).
METHOD: MERGEING SORT.
************************************************************************
SSORT
PURPOSE TO SORT AN ARRAY OR MATRIX BY ONE OR MORE SORT FIELDS
OF DECREASING MAJORITY.
USAGE CALL SSORT(NC,NR,MC,MR,ARRAY,ISORT,KKK,IV,SP)
OR CALL SSORT(NC,NR,MC,MR,ARRAY,ISORT,KKK,IV,SP,KTYPE)
WHERE NC: IS NUMBER OF COLUMNS FILLED IN MATRIX
NR: IS NUMBER OF ROWS FILLED IN MATRIX
MC: IS NUMBER OF COLUMNS DIMENSIONED IN MATRIX
MR: IS NUMBER OF ROWS DIMENSION IN MATRIX
ARRAY: IS DATA ARRAY TO BE SORTED
ISORT: IS A VECTOR CONTAINING THE COLUMN INDEXES OF
THE SORT FIELDS, FROM MOST MAJOR TO MOST MINOR
KKK: IS THE NUMBER OF SORT FIELDS IN ISORT
IV: IS A WORKING STORAGE VECTOR AT LEAST NR IN LENGTH.
SP: IS A WORKING STORAGE VECTOR AT LEAST NC IN LENGTH.
KTYPE: IS OPTIONAL ARGUMENT TELLING TYPE OF COMPARE TO
MAKE ON SORT FIELDS.
IF THE NTH ENTRY IN KTYPE IS ZERO, COMPARE THE NTH
SORT FIELD AS SIGNED NUMBERS
IF IT IS NON-ZERO, COMPARE AS ALPHANUMERIC OR
UNSIGNED INTEGER SO ALPHANUMERIC ORDER IS CORRECT
COMMENT THIS ROUTINE IS MANY TIMES FASTER THAN THE PREVIOUS SORT.
SINCE IT ALSO REQUIRES LESS STORAGE SPACE, ITS USE IS
RECOMMENDED OVER THE PREVIOUS ROUTINE.
************************************************************************
SUBMIT
PURPOSE TO ENTER A JOB IN THE INPUT (BATCH) QUEUE FROM PROGRAM
CONTROL
USAGE CALL SUBMIT(IVECT)
WHERE IVECT IS AN 19 WORD INTEGER VECTOR CONTAINING
IVECT(1) NAME OF CTL FILE. MAX. OF FIVE CHARACTERS ASCII.
EXT IS ALWAYS .CTL
IVECT(2) NAME OF LOG FILE. MAX. OF FIVE CHARACTERS ASCII.
EXT IS ALWAYS .LOG. DEFAULT IS SAME AS CTL FILE
IVECT(3) DISPOSITION FOR CTL FILE.
0=PRESERVE
1=DELETE
IVECT(4) DISPOSITION FOR LOG FILE.
0=PRESERVE
1=DELETE
IVECT(5) TIME LIMIT IN SECONDS. DEFAULT IS 60.
IVECT(6) PAGE LIMIT. DEFAULT IS 200
IVECT(7) CARD LIMIT. DEFAULT IS 0
IVECT(8) PAPER TAPE LIMIT. DEFAULT IS 0
IVECT(9) PLOTTER LIMIT. DEFAULT IS 0
IVECT(10) CORE LIMIT. DEFAULT IS CORMAX
IVECT(11) RESTARTABLITY.
0=YES
1=NO
IVECT(12) UNIQUENESS.
0=RUN ANY NUMBER OF JOBS UNDER PPN
1=GUARANTEE UNIQUE UNDER PPN
2=GUARANTEE UNIQUE TO SFD
IVECT(13) PRIORITY (1-63) STANDARD IS 10
IVECT(14) OUTPUT SWITCH (0,1,2,3,4)
IVECT(15) DEPENDENCY SWITCH (0-777777)
IVECT(16) AFTER SWITCH PART ONE
TIME OF DAY OR PLUS TIME IN MINUTES
PLUS TIME IS INDICATED BY A NEGATIVE IN IVECT(17)
IVECT(17) AFTER SWITCH PART TWO
DATE IN 15 BIT FORMAT OR ZERO FOR TODAY
NEGATIVE INDICATES TIME IS PLUS FORMAT
IVECT(18) DEADLINE SWITCH PART ONE. SAME AS AFTER
IVECT(19) DEADLINE SWITCH PART TWO. SAME AS AFTER
NOTE: SUBMIT DOES NOT SUPORT GALAXY-10.
************************************************************************
TRUTH
PURPOSE TO COMPRESS A LARGE TRUTH TABLE INTO LITTLE SPACE, AND TO
MANIPULATE THE COMPRESSED TABLE. USING THIS ROUTINE, EACH BIT
IN A WORD CAN REPRESENT EITHER TRUE, OR FALSE, SO THAT,
FOR EXAMPLE, A 360 ELEMENT TRUTH TABLE WILL FIT IN 10 WORDS OF
MEMORY.
USAGE CALL TRUTH(TABLE,IFUNCT,IENTRY,VALUE)
WHERE TABLE: IS TRUTH TABLE.
IFUNCT: IS FUNCTION TO BE PERFORMEED.
IF IFUNCT=0, TEST TABLE ENTRY.
IF IFUNCT#0, SET TABLE ENTRY TO VALUE.
IENTRY: NUMBER OF ENTRY TO BE TESTED OR SET.
VALUE: VALUE OF ENTRY, IF IFUNCT=0.
VALUE TO SET ENTRY TO IF IFUNCT#0.
(# MEANS NOT EQUAL.)
************************************************************************
TTYNAM
PURPOSE TO DETERMINE THE ACTUAL PHYSICAL DEVICE NAME OF THE
USER'S TELETYPE.(SUCH AS TTY3,TTY30,CTY, ETC.)
USAGE CALL TTYNAM(NAME)
WHERE NAME IS NAME RETURNED. SHOULD BE DOUBLE PRECISION.
************************************************************************
TTYPTY
PURPOSE TO DETERMINE FOR CALLING PROGRAM WHETHER CONTROL IS
FROM TELETYPE OR PSEUDOTELETYPE, AND ALLOW IT TO MAKE DECISION
ACCORDINGLY.
USAGE CALL TTYPTY(ICODE)
WHERE ICODE: IS CODE FOR DEVICE.
ICODE=0 FOR TELETYPE.
ICODE=-1 FOR PSEUDO-TELETYPE.
************************************************************************
TYPEON
PURPOSE TURN OFF CONTROL O SO THAT NEXT TYPEOUT WILL PRINT
AND NOT BE SUPPRESSED
USAGE CALL TYPEON
************************************************************************
XPRODH
PURPOSE: TO FORM SUMS AND SUMS OF CROSS-PRODUCTS. VERY USEFUL
FOR CORRELATIONS, ETC.
USAGE: CALL XPRODH(X,SX,SXX,N,NDIM)
WHERE: X: IS VECTOR OF VARIABLES(ONE OBSERVATION)
SX: IS VECTOR OF SUMS OF X'S.
SXX: IS MATRIX OF CROSS-PRODUCTS OF X'S.(ONLY LOWER
CORNER TRIANGULAR PORTION IS GENERATED, SINCE
MATRIX IS SYMMETRIC.)
N: NUMBER OF VARIABLES.
NDIM: DIMENSION OF SXX IN MAINLINE(I.E. SXX(NDIM,NDIM))
************************************************************************
XPRODP
PURPOSE: FORM SUMS AND SUMS OF CROSS-PRODUCTS IN A STORAGE
MODE MAKING MORE EFFICIENT USE OF SPACE.
USAGE: CALL XPRODP(X,SX,SXX,N)
WHERE: X: IS VECTOR OF VARIABLES(ONE OBSERVATION).
SX: IS VECTOR OF SUMS OF X'S.
(LENGTH AT LEAST N)
SXX: IS VECTOR OF SUMS OF CROSS-PRODUCTS OF X'S.
(LENGTH AT LEAST (N*N+N)/2)
ONLY UPPER CORNER TRIANGULAR PORTION IS FORMED
AND STORED BY COLUMNS(IN CLOSE PACKED FORM. SEE
THE SCIENTIFIC SUBROUTINE PACKAGE FOR A MORE
COMPLETE DESCRIPTION OF THIS STORAGE MODE.)
N: IS NUMBER OF VARIABLES.
************************************************************************
ZEROH
PURPOSE: ZERO AN ARRAY AND A SQUARE MATRIX. FREQUENTLY USED WITH
XPRODH.
USAGE: CALL ZEROH(A,A2,N,NDIM)
WHERE: NDIM: IS DIMENSION OF A2 IN MAINLINE.
A: IS A VECTOR OF LENGTH N OR GREATER.
A2: IS A NDIM BY NDIM MATRIX.
N: IS SIZE TO BE ZEROED.
(A AND A2 ARE TO BE ZEROED).
************************************************************************
ZEROP
PURPOSE: TO ZERO A VECTOR.
USAGE: CALL ZEROP(A,N)
WHERE: A: IS VECTOR TO BE ZEROED.
N: IS NUMBER OF ELEMENTS IN A TO BE ZEROED.
************************************************************************