Trailing-Edge
-
PDP-10 Archives
-
decuslib20-01
-
decus/20-0000/decrev.for
There are 10 other files named decrev.for in the archive. Click here to see a list.
00100 C***********************************************************************
00200 C
00300 C DECREV.FOR VERSION 1
00400 C
00500 C
00600 C THIS PROGRAM CREATES A 'RUNOFF' FILE WHICH CONTAINS THE REVIEW
00700 C OF DECUS DECSYSTEM-10 LIBRARY PROGRAMS.
00800 C
00900 C THE PROGRAM IS ENTIRELY TABLE-DRIVEN IN THE QUESTION
01000 C SECTION, AND THE TABLES ARE SET UP IN THE BLOCK DATA SUBROUTINE
01100 C AND PASSED TO THE MAIN ROUTINE THROUGH THE COMMON BLOCK /QUES/.
01200 C CHECK THAT SECTION TO ADD QUESTIONS OR CATEGORIES OF QUESTIONS.
01300 C
01400 C RESTRICTIONS IN THIS PROGRAM:
01500 C PROGRAM TITLE <= 10 CHAR LONG [PROGTI]
01600 C NAME OF REVIEWER <= 30 CHAR LONG [RNAM]
01700 C TITLE OF REVIEWER <= 40 CHAR LONG [RTIT]
01800 C COMPANY OR INSTITUTION NAME <= 40 CHAR LONG [COMP]
01900 C DEPARTMENT NAME <= 40 CHAR LONG [DEPT]
02000 C CITY+STATE+ZIP <= 40 CHAR LONG [CSZ]
02100 C COUNTRY NAME <= 40 CHAR LONG [CNTRY]
02200 C
02300 C TO CHANGE ANY OF THESE RESTRICTIONS, CHANGE THE LENGTH
02400 C OF THE ARRAY NAME GIVEN IN THE [ ] FOLLOWING THE RESTRICTION
02500 C
02600 C TO CHANGE THE MAXIMUM LENGTH OF ANY LINE USED TO
02700 C REPLY TO QUESTIONS, CHANGE THE DIMENSION OF THE
02800 C ARRAY 'LINE' AND CHANGE THE FORMAT STATEMENTS 106 AND 108.
02900 C
03000 C
03100 C WRITTEN BY H. D. TODD, WESLEYAN UNIVERSITY, MAY, 1975.
03200 C
03300 C***********************************************************************
03400 INTEGER DECSYS,REV,QUSCAT,QUSPTR
03500 DOUBLE PRECISION PROGTI,VERSCD,RNAM(3),RTIT(5),COMP(4),
03600 1 DEPT(4),CSZ(4),ADATE,CNTRY(4)
03700 DIMENSION LINE(16)
03800 COMMON/QUES/NUMCAT,MAXQUS(4),LQSTRT(30),LQEND(30),HLCAT(12,4),
03900 1QUEST(12,50)
04000 C
04100 C VERSION NUMBER
04200 C
04300 DATA REV/1/, REVVER/'1'/
04400 C***********************************************************************
04500 C
04600 C SECTION 1
04700 C REQUEST BIOGRAPHICAL DATA FROM THE REVIEWER FOR THE REVIEW
04800 C FILE. REVIEW FILEIS ON UNIT 'REV'.
04900 C
05000 C***********************************************************************
05100 OPEN(UNIT=5,DEVICE='TTY')
05200 WRITE (5,1)
05300 1 FORMAT (//,' DECUS DECSYSTEM-10 LIBRARY PROGRAM REVIEW',//,
05400 1 ' WHAT IS THE NUMBER OF THE PROGRAM YOU ARE REVIEWING? ',$)
05500 C
05600 C ALLOW THE USER TO TYPE IN THE PROGRAM NUMBER AS EITHER
05700 C 'NNN' OR '10-NNN', WHERE NNN IS THE PROGRAM NUMBER.
05800 C
05900 READ (5,2) DECSYS,NPROG
06000 2 FORMAT (2I)
06100 IF (NPROG.EQ.0) NPROG = DECSYS
06200 IF (NPROG.EQ.DECSYS) DECSYS = 10
06300 NPROG = IABS(NPROG)
06400 C
06500 C CREATE FILE 'DECXXX.RNO', WHERE 'XXX'
06600 C IS THE DECUS CATALOG NUMBER.
06700 C
06800 CALL OPNOUT(REV,NPROG)
06900 WRITE (5,3)
07000 3 FORMAT (/,' WHAT IS THE PROGRAM TITLE? '$)
07100 READ (5,4) PROGTI
07200 4 FORMAT (5A10)
07300 WRITE (5,5)
07400 5 FORMAT(/,' WHAT IS THE VERSION NUMBER OF THE PROGRAM -
07500 1 OR SOURCE FILE',/,' CREATION DATE AS DD-MON-YY (LATEST
07600 2 DATE IF THERE ARE SEVERAL SOURCE FILES)? ')
07700 READ (5,4) VERSCD
07800 WRITE (5,6)
07900 6 FORMAT (/,' WHAT IS YOUR NAME? ',$)
08000 READ (5,4) RNAM
08100 WRITE (5,7)
08200 7 FORMAT (/,' WHAT IS YOUR TITLE? (OPTIONAL) ',$)
08300 READ(5,4) RTIT
08400 WRITE (5,8)
08500 8 FORMAT (/,' WHAT IS YOUR ADDRESS OR DEPARTMENT WITHIN YOUR
08600 1 COMPANY OR INSTITUTION? ')
08700 READ (5,4) DEPT
08800 WRITE (5,9)
08900 9 FORMAT (/,' WITH WHAT COMPANY OR INSTITUTION ARE YOU
09000 1 ASSOCIATED? ')
09100 READ(5,4) COMP
09200 WRITE (5,10)
09300 10 FORMAT (/,' CITY, STATE ZIPCODE ')
09400 READ(5,4) CSZ
09500 WRITE (5,11)
09600 11 FORMAT (/,' COUNTRY? ',$)
09700 READ (5,4) CNTRY
09800 CALL DATE(ADATE)
09900 WRITE (REV,19) REVVER
10000 C
10100 C DUMP REVIEWER BIOGRAPHICAL
10200 C
10300 19 FORMAT ('.PS 58,65;.FLAG CAP;.LC',/,
10400 1 '^^DECREV.FOR VERSION ',A5,'\\',/,
10500 2 '.S 2;.TITLE <DECUS ^LIBRARY ^PROGRAM ^REVIEW',/,
10600 3 '.CENTER; <DECUS ^LIBRARY ^PROGRAM ^REVIEW',/,
10700 4 '.S 3;.LM 45')
10800 WRITE (REV,20) DECSYS,NPROG,PROGTI,VERSCD,RNAM,RTIT,DEPT,
10900 1 COMP,CSZ,CNTRY,ADATE
11000 20 FORMAT ('.I -34',/, '<DECUS ^LIBRARY ^PROGRAM ^BEING
11100 1 ^REVIEWED:', I4,'-',I3,/,'.I -24',/,
11200 2 '<DECUS ^LIBRARY ^PROGRAM ^NAME: ^^',A10,'\\',/,'.I -29',/,
11300 3 '^SOURCE ^VERSION OR ^CREATION ^DATE: ^^',A10,'\\',/,
11400 3 '.S 2;.LM 25;.I -18',/,
11500 4 '^REVIEWER''S ^NAME: ^^',3X,3A10,'\\',/,'.I -19',/,
11600 5 '^REVIEWER''S ^TITLE: ^^',2X,5A10,'\\',/,'.I -21',/,
11700 6 '^REVIEWER''S ^ADDRESS: ^^',4A10,'\\',/,'.I 0',/,
11800 7 '^^',4A10,'\\',/,'.I 0',/,
11900 8 '^^',4A10,'\\',/,'.I 0',/,
12000 9 '^^',4A10,'\\',/,'.I 0',/,
12100 1 '.S 2;.I -17',/, '^DATE OF ^REVIEW: ^^',A10,'\\',/,
12200 2 '.S 2')
12300 C***********************************************************************
12400 C
12500 C END SECTION 1, BEGIN
12600 C
12700 C SECTION 2
12800 C THE QUESTION-AND-ANSWER PHASE.
12900 C
13000 C***********************************************************************
13100 WRITE (5,30)
13200 30 FORMAT (//,' FOR EACH OF THE FOLLOWING QUESTIONS, PLEASE TYPE
13300 1 YOUR RESPONSE USING',/,' AS MANY LINES AS REQUIRED. PLEASE USE
13400 2 NO MORE THAN 80 CHARACTERS',/,' PER LINE. WHEN YOU
13500 2 FINISH YOUR RESPONSE TO A QUESTION,',/,
13600 3 ' TYPE A <CONTROL-Z> CHARACTER.')
13700 C
13800 C THIS IS THE QUESTION-AND-ANSWER MAIN LOOP
13900 C
14000 C NQUEST = # OF THE QUESTION BEING PROCESSED
14100 C NUMCAT = # OF CATEGORIES OF QUESTIONS
14200 C QUSCAT = CURRENT CATEGORY #
14300 C MAXQUS(QUSCAT) = # OF QUESTIONS IN CURRENT CATEGORY
14400 C QUSPTR = # OF CURRENT QUESTION WITHIN ITS CATEGORY
14500 C LQSTRT(NQUEST) = INDEX FOR FIRST LINE OF CURRENT QUESTION
14600 C LQEND(NQUEST) = INDEX FOR LAST LINE OF CURRENT QUESTION
14700 C
14800 NQUEST = 0
14900 DO 100 QUSCAT = 1,NUMCAT
15000 WRITE (REV,107) (HLCAT(J,QUSCAT),J=1,12)
15100 107 FORMAT ('.LM 0;.S 2; ^^^&',12A5,'\\\&',/,'.S 1;.UC;.LS')
15200 DO 110 QUSPTR = 1, MAXQUS(QUSCAT)
15300 NQUEST = NQUEST + 1
15400 WRITE (5,101) NQUEST,((QUEST(I,J),I=1,12),
15500 1 J=LQSTRT(NQUEST),LQEND(NQUEST))
15600 101 FORMAT (//,1X,I2,'.',(1X,12A5))
15700 WRITE(5,102)
15800 102 FORMAT (/)
15900 WRITE(REV,103) ((QUEST(I,J),I=1,12),J=LQSTRT(NQUEST),
16000 1 LQEND(NQUEST))
16100 103 FORMAT ('.LM 10;.LE',/,(12A5))
16200 WRITE (REV,104)
16300 104 FORMAT ('.S 1',/,'<RESPONSE:')
16400 C
16500 C LOOP ON INPUT UNTIL EOF
16600 C
16700 105 READ (5,106,END=110) LINE
16800 106 FORMAT (16A5)
16900 WRITE (REV,108) LINE
17000 108 FORMAT (16A5)
17100 GO TO 105
17200 110 WRITE (REV,113)
17300 113 FORMAT ('.S 1')
17400 100 WRITE (REV,111)
17500 111 FORMAT ('.ELS')
17600 WRITE (REV,112) PROGTI
17700 112 FORMAT ('.S 2;.LM 0;[END OF REVIEW OF ',A10,']',/,'.PG')
17800 STOP
17900 END
18000 BLOCK DATA
18100 C****************************************************************************
18200 C
18300 C THIS ROUTINE SETS UP THE TABLES OF POINTERS AND QUESTIONS USED BY THE
18400 C MAIN ROUTINE. VARIABLES USED HERE ARE DESCRIBED IN THE MAIN ROUTINE,
18500 C EXCEPT FOR 'HLCAT', THE ARRAY CONTAINING THE CATEGORY TITLE, AND
18600 C 'QUEST', WHICH CONTAINS THE QUESTIONS.
18700 C QUESTIONS ARE STORED IN QUEST WITH UP TO 60 CHAR PER LINE. LINES OF
18800 C LESS THAN 56 CHAR ARE PADDED WITH INTEGER 0 TO FORCE THEM TO
18900 C USE 12 WORDS.
19000 C
19100 C******************************************************************************
19200 C
19300 C THE FOLLOWING PARAMETERS SET THE STARTING AND ENDING LINES OF THE
19400 C QUESTIONS. TO CHANGE THE ORDER OF THE QUESTIONS OR TO INSERT OR
19500 C ADD QUESTIONS, EXTEND THE LENGTH OF THE ARRAY 'QUEST'
19600 C AND INSERT THE APPROPRIATE PARAMETERS HERE AND INSERT THE
19700 C DATA STATEMENT SUPPLYING THE QUESTION IN THE APPROPRIATE PLACE BELOW.
19800 C
19900 PARAMETER
20000 1 BQA1=1,EQA1=2,
20100 2 BQA2=3,EQA2=5,
20200 3 BQB1=6,EQB1=7,
20300 4 BQB2=8,EQB2=9,
20400 5 BQB3=10,EQB3=11,
20500 6 BQB4=12,EQB4=14,
20600 7 BQB5=15,EQB5=17,
20700 8 BQC1=18,EQC1=21,
20800 9 BQC2=22,EQC2=24,
20900 1 BQC3=25,EQC3=27,
21000 1 BQC4=28,EQC4=29,
21100 2 BQC5=30,EQC5=32,
21200 3 BQC6=33,EQC6=35,
21300 4 BQC7=36,EQC7=37,
21400 5 BQC8=38,EQC8=39,
21500 6 BQC9=40,EQC9=44,
21600 7 BQD1=45,EQD1=46,
21700 8 BQD2=47,EQD2=48
21800 COMMON/QUES/NUMCAT,MAXQUS(4),LQSTRT(30),LQEND(30),HLCAT(12,4),
21900 1QUEST(12,50)
22000 DATA NUMCAT/4/
22100 DATA MAXQUS/2,5,9,2/
22200 DATA (HLCAT(J,1),J=1,12)/'DISTRIBUTION PROCEDURE REVIEW',6*0/
22300 DATA (HLCAT(J,2),J=1,12)/'DOCUMENTATION REVIEW',8*0/
22400 DATA (HLCAT(J,3),J=1,12)/'PROGRAM REVIEW',9*0/
22500 DATA (HLCAT(J,4),J=1,12)/'GENERAL COMMENTS',8*0/
22600 C
22700 C CATEGORY A, QUESTION 1
22800 C
22900 DATA LQSTRT(1),LQEND(1)/BQA1,EQA1/
23000 DATA ((QUEST(I,J),I=1,12),J=BQA1,EQA1)/
23100 1 'Were all files present and complete? If not, which files or',
23200 2 'parts thereof were missing?',6*0/
23300 C
23400 C CATEGORY A, QUESTION 2
23500 C
23600 DATA LQSTRT(2),LQEND(2)/BQA2,EQA2/
23700 DATA ((QUEST(I,J),I=1,12),J=BQA2,EQA2)/
23800 1 'Were all files readable in the format you requested?',0,
23900 2 'If not, indicate the format requested for the programs and',
24000 3 'describe the problems you had.',6*0/
24100 C
24200 C CATEGORY B QUESTION 1
24300 C
24400 DATA LQSTRT(3),LQEND(3)/BQB1,EQB1/
24500 DATA ((QUEST(I,J),I=1,12),J=BQB1,EQB1)/
24600 1 'Does the documentation accompanying the program meet or',0,
24700 2 'exceed the standard? If not, what improvements are required?'/
24800 C
24900 C CATEGORY B QUESTION 2
25000 C
25100 DATA LQSTRT(4),LQEND(4)/BQB2,EQB2/
25200 DATA ((QUEST(I,J),I=1,12),J=BQB2,EQB2)/
25300 1 'Is the documentation complete? (Are there unstated',0,
25400 2 'restrictions or features? If so, please indicate them.)'/
25500 C
25600 C CATEGORY B QUESTION 3
25700 C
25800 DATA LQSTRT(5),LQEND(5)/BQB3,EQB3/
25900 DATA ((QUEST(I,J),I=1,12),J=BQB3,EQB3)/
26000 1 'Is the documentation easy to use? Suggest reasonable',0,
26100 2 'reorganization if possible.',6*0/
26200 C
26300 C CATEGORY B QUESTION 4
26400 C
26500 DATA LQSTRT(6),LQEND(6)/BQB4,EQB4/
26600 DATA ((QUEST(I,J),I=1,12),J=BQB4,EQB4)/
26700 1 'Is the program abstract in the catalog accurate in its',0,
26800 2 'description of the program? What amendments would you',0,
26900 3 'suggest?',10*0/
27000 C
27100 C CATEGORY B QUESTION 5
27200 C
27300 DATA LQSTRT(7),LQEND(7)/BQB5,EQB5/
27400 DATA ((QUEST(I,J),I=1,12),J=BQB5,EQB5)/
27500 1 'Are there "dangerous" features which installation management',
27600 2 'might want to disable before putting the program onto',0,
27700 3 'a system?',10*0/
27800 C
27900 C CATEGORY C QUESTION 1
28000 C
28100 DATA LQSTRT(8),LQEND(8)/BQC1,EQC1/
28200 DATA ((QUEST(I,J),I=1,12),J=BQC1,EQC1)/
28300 1 'Did the program files all compile without errors? If not,',
28400 2 'list the names of files which did not compile or attach',0,
28500 3 'listings of the compilations. Also include the name and',
28600 4 'version of the compiler.',7*0/
28700 C
28800 C CATEGORY C QUESTION 2
28900 C
29000 DATA LQSTRT(9),LQEND(9)/BQC2,EQC2/
29100 DATA ((QUEST(I,J),I=1,12),J=BQC2,EQC2)/
29200 1 'Did the program files load correctly? List names of',0,
29300 2 'missing global references. Include the name and version of',
29400 3 'the compiler.',9*0/
29500 C
29600 C CATEGORY C QUESTION 3
29700 C
29800 DATA LQSTRT(10),LQEND(10)/BQC3,EQC3/
29900 DATA ((QUEST(I,J),I=1,12),J=BQC3,EQC3)/
30000 1 'Can the loading process be revised to take advantage',0,
30100 2 'of the LINK overlay feature to produce programs',2*0,
30200 3 'which run more efficiently?',6*0/
30300 C
30400 C CATEGORY C QUESTION 4
30500 C
30600 DATA LQSTRT(11),LQEND(11)/BQC4,EQC4/
30700 DATA ((QUEST(I,J),I=1,12),J=BQC4,EQC4)/
30800 1 'If you loaded the ".REL" files you created, did the ".SAV"',
30900 2 'OR ".SHR" files distributed match the file you created?',0/
31000 C
31100 C CATEGORY C QUESTION 5
31200 C
31300 DATA LQSTRT(12),LQEND(12)/BQC5,EQC5/
31400 DATA ((QUEST(I,J),I=1,12),J=BQC5,EQC5)/
31500 1 'Does the program perform as documented? List any',2*0,
31600 2 'undocumented program error messages or monitor error',0,
31700 3 'messages you discovered.',7*0/
31800 C
31900 C CATEGORY C QUESTION 6
32000 C
32100 DATA LQSTRT(13),LQEND(13)/BQC6,EQC6/
32200 DATA ((QUEST(I,J),I=1,12),J=BQC6,EQC6)/
32300 1 'List deficiencies which might be easily remedied or any',0,
32400 2 'error-detecting which should be implemented within the',0,
32500 3 'program.',10*0/
32600 C
32700 C CATEGORY C QUESTION 7
32800 C
32900 DATA LQSTRT(14),LQEND(14)/BQC7,EQC7/
33000 DATA ((QUEST(I,J),I=1,12),J=BQC7,EQC7)/
33100 1 'Is the program easy to use? Are the commands or input',0,
33200 2 'data formats ambiguous?',7*0/
33300 C
33400 C CATEGORY C QUESTION 8
33500 C
33600 DATA LQSTRT(15),LQEND(15)/BQC8,EQC8/
33700 DATA ((QUEST(I,J),I=1,12),J=BQC8,EQC8)/
33800 1 'Is the program documented internally well enough for a user',
33900 1 'to make minor changes easily if necessary?',3*0/
34000 C
34100 C CATEGORY C QUESTION 9
34200 C
34300 DATA LQSTRT(16),LQEND(16)/BQC9,EQC9/
34400 DATA ((QUEST(I,J),I=1,12),J=BQC9,EQC9)/
34500 1 'If you have made improvements to the programs or',2*0,
34600 2 'documentation (if it is machine-readable) which might be ',
34700 3 'of general use, please attach the changed files as you now',
34800 4 'have them and a FILCOM between your version and the',0,
34900 5 'distributed version.',8*0/
35000 C
35100 C CATEGORY D QUESTION 1
35200 C
35300 DATA LQSTRT(17),LQEND(17)/BQD1,EQD1/
35400 DATA ((QUEST(I,J),I=1,12),J=BQD1,EQD1)/
35500 1 'Does the program provide the same service as programs',0,
35600 2 'already available on the DECsystem-10? Which ones?',2*0/
35700 C
35800 C CATEGORY D QUESTION 2
35900 C
36000 DATA LQSTRT(18),LQEND(18)/BQD2,EQD2/
36100 DATA ((QUEST(I,J),I=1,12),J=BQD2,EQD2)/
36200 1 'Please enter below any general comments you have about',0,
36300 2 'the program or its documentation.',5*0/
36400 END
36500 SUBROUTINE OPNOUT(IREV,NUM)
36600 DOUBLE PRECISION FILNAM
36700 N1 = MOD(NUM,10)
36800 N2 = (MOD(NUM,100))/10
36900 N3 = MOD(NUM,1000)/100
37000 ENCODE(10,1,FILNAM) N3,N2,N1
37100 1 FORMAT ('DEC',3I1,'.RNO')
37200 OPEN(UNIT=IREV,DEVICE='DSK',FILE=FILNAM,ACCESS='SEQOUT',
37300 1 MODE='ASCII')
37400 RETURN
37500 END