PDP-10 Archive: decus/20-153/rpgeee.cbl from decuslib20-06

Trailing-Edge - PDP-10 Archives - decuslib20-06 - decus/20-153/rpgeee.cbl
There is 1 other file named rpgeee.cbl in the archive. Click here to see a list.
IDENTIFICATION DIVISION.
PROGRAM-ID.	RPGEEE.
DATE-WRITTEN.	APRIL 13, 1976.
AUTHOR.	HAL ROACH.
INSTALLATION.	CERRITOS COLLEGE.
REMARKS.	PROGRAM TO UPDATE E DATA CARD.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER.	DECSYSTEM-10.
OBJECT-COMPUTER.	DECSYSTEM-10.
SPECIAL-NAMES.
	CONSOLE IS TTY.
	CHANNEL (1) IS HOF.
INPUT-OUTPUT SECTION.
FILE-CONTROL.
	SELECT PROGRAM-FILE ASSIGN TO DSK
	ACCESS MODE IS RANDOM
	ACTUAL KEY IS PROGRAM-KEY
	FILE LIMIT IS 99999.
DATA DIVISION.
FILE SECTION.
FD	PROGRAM-FILE
	BLOCK CONTAINS 8 RECORDS
	LABEL RECORDS ARE STANDARD
	VALUE OF IDENTIFICATION IS PROGRAM-IDENTIFICATION
	DATA RECORD IS PROGRAM-RECORD.
01	PROGRAM-RECORD	PIC X(90).
WORKING-STORAGE SECTION.
77	NUM-IT-1		PIC 9.
77	NUM-IT-2		PIC 99.
77	NUM-IT-3		PIC 999.
77	NUM-IT-4		PIC 9(4).
77	ELE-9			PIC 99.
77	CLEAR-IT		PIC X(36)	VALUE SPACES.
77	CLEAR-3300		PIC X(28)	VALUE SPACES.
77	ERROR-CODE		PIC X.
77	I			PIC S9(5)	COMP.
77	J			PIC S9(5)	COMP.
77	K			PIC S9(5)	COMP.
77	L			PIC 9(5)	COMP.
77	PROGRAM-KEY		PIC 9(5)	COMP.
77	NEXT-PROGRAM		PIC X(6).
01	ELEM-NO.
	02 ELE-NUM	PIC XX.
01	NO-ELEM REDEFINES ELEM-NO.
	02 NUM-ELE	PIC 99.
01	DATA-STORAGE.
	02 DATA-A	PIC X(17)	OCCURS 15 TIMES.
01	THE-DATA-A.
	02 THE-DATA.
	  03 DATA-16.
	    04 DATA-15.
	      05 DATA-14.
	        06 DATA-13.
	          07 DATA-12.
	            08 DATA-1	PIC X.
	            08 DATA-2	PIC X.
	         07 DATA-3	PIC X.
	       06 DATA-4	PIC X.
	      05 DATA-5		PIC X.
	    04 DATA-6		PIC X.
	  03 DATA-7		PIC XX.
	02 FILLER		PIC X(9).
01	PROGRAM-ZERO.
	02 FILLER		PIC X(80).
	02 PROGRAM-REC-NO	PIC 9(5).
	02 PROGRAM-LAST-REC	PIC 9(5).
01	PROGRAM-MAIN.
	02 PROGRAM-PAGE		PIC 99.
	02 PROGRAM-LINE		PIC 999.
	02 PROGRAM-FORM		PIC X.
	02 PROGRAM-INFO.
	  03 FILLER		PIC X.
	  03 STAR-COMMENT	PIC X(67).
	02 PROGRAM-IDENT	PIC X(6).
	02 PROGRAM-ACT-REC	PIC 9(5).
	02 PROGRAM-FILL		PIC 9(5).
01	PROG-INFO.
	02 FIL-LER.
	  03 THE-STARE	PIC X.
	  03 FILLER	PIC XXX.
	02 FRO-FIL	PIC X(8).
	02 TO-FIL	PIC X(8).
	02 TAB-ARR-1	PIC X(6).
	02 NUM-ENT	PIC XXX.
	02 ENT-NUM REDEFINES NUM-ENT	PIC ZZ9.
	02 ENT-TAB	PIC X(4).
	02 TAB-ENT REDEFINES ENT-TAB	PIC ZZZ9.
	02 LEN-ENT-1	PIC XXX.
	02 ENT-LEN-1 REDEFINES LEN-ENT-1	PIC ZZ9.
	02 PAC-BIN-1	PIC X.
	02 DEC-POS-1	PIC X.
	02 SEQ-1	PIC X.
	02 TAB-ARR-2	PIC X(6).
	02 LEN-ENT-2	PIC XXX.
	02 ENT-LEN-2 REDEFINES LEN-ENT-2	PIC ZZ9.
	02 PAC-BIN-2	PIC X.
	02 DEC-POS-2	PIC X.
	02 SEQ-2	PIC X.
	02 COMMENTS	PIC X(17).
01	PROG-COMMENT.
	02 THE-STAR	PIC X	VALUE "*".
	02 THE-COMMENT	PIC X(67).
01	TUBE-TITLE.
	02 TUBE-LINE-0.
	  03 FILLER		PIC X(4)	VALUE "PAGE".
	  03 DISPLAY-PAGE	PIC ZZZ.
	  03 FILLER		PIC X(5)	VALUE " LINE".
	  03 DISPLAY-LINE	PIC Z(4).
	  03 FILLER		PIC X(34)	VALUE
	  " E DATA CARD".
	02 TUBE-LINE-1	PIC X(50)	VALUE
	"ELEMENT ELEMENT                      ELEMENT".
	02 TUBE-LINE-2	PIC X(50)	VALUE
	"NUMBER  DESCRIPTION                  [ENTRY]".
01	TUBE-DISPLAY.
	02 FILLER	PIC X(47)	VALUE
	"FROM FILENAME                [        ]".
	02 FILLER	PIC X(47)	VALUE
	"TO FILENAME                  [        ]".
	02 FILLER	PIC X(47)	VALUE
	"TABLE OR ARRAY NAME - 1      [      ]".
	02 FILLER	PIC X(47)	VALUE
	"NUMBER OF ENTRIES PER RECORD [   ]".
	02 FILLER	PIC X(47)	VALUE
	"NUMBER OF ENTRIES PER TABLE  [    ]".
	02 FILLER	PIC X(47)	VALUE
	"LENGTH OF ENTRY - 1          [   ]".
	02 FILLER	PIC X(47)	VALUE
	"PACKED OR BINARY FIELD - 1   [ ]".
	02 FILLER	PIC X(47)	VALUE
	"DECIMAL POSITIONS - 1        [ ]".
	02 FILLER	PIC X(47)	VALUE
	"SEQUENCE - 1                 [ ]".
	02 FILLER	PIC X(47)	VALUE
	"TABLE OR ARRAY NAME - 2      [      ]".
	02 FILLER	PIC X(47)	VALUE
	"LENGTH OF ENTRY - 2          [   ]".
	02 FILLER	PIC X(47)	VALUE
	"PACKED OR BINARY FIELD - 2   [ ]".
	02 FILLER	PIC X(47)	VALUE
	"DECIMAL POSITIONS - 2        [ ]".
	02 FILLER	PIC X(47)	VALUE
	"SEQUENCE - 2                 [ ]".
	02 FILLER	PIC X(47)	VALUE
	"COMMENTS                     [                ]".
01	DISPLAY-TUBE REDEFINES TUBE-DISPLAY.
	02 FILLER	OCCURS 15 TIMES.
	  04 THE-TUBE	PIC X(47).
01	THE-NUMBER.
	02 II		PIC Z(5).
	02 FILLER	PIC XXX.
01	PROGRAM-IDENTIFICATION.
	02 PROGRAM-NAME		PIC X(6).
	02 PROGRAM-EXT		PIC XXX		VALUE "TMP".
01	PASS-IT.
	02 THE-FILE	PIC X(6).
	02 THE-TERM	PIC X.
	02 THE-ACTION	PIC XXX.
	02 THE-PAGE	PIC 99.
	02 THE-LINE	PIC 999.
	02 THE-FORM	PIC X.
	02 R-TYPE	PIC X.
01	ALL-DATA.
	02 ALL-1	PIC X.
	02 ALL-23.
	  03 ALL-2	PIC X.
	  03 ALL-3	PIC X.
	02 FILLER	PIC X(14).
PROCEDURE DIVISION.
START SECTION.
BEGIN.
	ENTER MACRO TRAP.
	MOVE SPACES TO PASS-IT.
*	DISPLAY "PASS-IT = " WITH NO ADVANCING ACCEPT PASS-IT.
	ENTER MACRO GTPRMS USING PASS-IT "X".
	IF THE-TERM = "A" OR "D" OR "V" OR "3" OR "B"
		GO TO CONT-PROG.
	DISPLAY "THE DRIVER PROGRAM WAS NOT USED".
	STOP RUN.
CONT-PROG.
	MOVE THE-FILE TO PROGRAM-NAME.
	IF  THE-ACTION = "CHG"
		PERFORM FIND-REC THRU END-FIND-REC.
	PERFORM CLEAR-SCREEN.
	ENTER MACRO SETTY USING "NO CRLF".
	ENTER MACRO SETTY USING "FORM".
	ENTER MACRO SETTY USING "WIDTH 80".
	IF THE-STARE = "*"
		MOVE 1 TO K
		MOVE THE-STARE TO DATA-1
		MOVE FIL-LER TO DATA-A (1)
		GO TO COMMENT-CHECK.
	MOVE THE-PAGE TO DISPLAY-PAGE.
	MOVE THE-LINE TO DISPLAY-LINE.
	DISPLAY TUBE-LINE-0.
	DISPLAY TUBE-LINE-1.
	DISPLAY TUBE-LINE-2.
	MOVE 3 TO I.
LOOP-DISPLAY.
	ADD 1 TO I.
	IF I > 18 GO TO END-DISPLAY.
	SUBTRACT 3 FROM I GIVING K.
	MOVE K TO II.
	MOVE 1 TO J.
	PERFORM CURSOR.
	DISPLAY THE-NUMBER THE-TUBE (K) WITH NO ADVANCING.
	MOVE 39 TO J.
	PERFORM CURSOR.
	DISPLAY DATA-A (K).
	GO TO LOOP-DISPLAY.
END-DISPLAY.
	IF THE-ACTION = "ADD"
		GO TO ADD-IT.
FIND-NUMBER.
	MOVE 23 TO I.
	MOVE 1 TO J.
	PERFORM CURSOR.
	DISPLAY "ELEMENT NUMBER = " WITH NO ADVANCING.
	MOVE SPACES TO ELE-NUM.
	DISPLAY ELE-NUM WITH NO ADVANCING.
	MOVE 18 TO J.
	PERFORM CURSOR.
	ACCEPT ELE-NUM.
	IF ELE-NUM = "EN"
		PERFORM CHG-REC THRU END-CHG-REC
		PERFORM CLEAR-SCREEN
		GO TO END-IT.
	MOVE NUM-ELE TO ELE-9.
	EXAMINE ELE-NUM REPLACING ALL SPACES BY ZERO.
	IF ELE-NUM IS NOT NUMERIC
		PERFORM BAD-NUMBER
		GO TO FIND-NUMBER.
	IF ELE-9 < 1 OR ELE-9 > 15
		PERFORM BAD-NUMBER
		GO TO FIND-NUMBER.
	MOVE 23 TO I.
	MOVE 20 TO J.
	PERFORM CURSOR.
	PERFORM CLEAR-LINE.
	MOVE ELE-9 TO I.
	ADD 3 TO I.
BY-NUM.
	MOVE 39 TO J.
	PERFORM CURSOR.
	SUBTRACT 3 FROM I GIVING K.
	MOVE K TO II.
ACCEPT-CHG.
	ACCEPT DATA-A (K).
	IF THE-ACTION = "ADD"
		MOVE DATA-A (K) TO ALL-DATA.
	IF ALL-1 = "/"
		GO TO CHECK-SLASH.
	IF K = 1 GO TO COMMENT-CHECK.
EDIT-IT.
	PERFORM THE-EDIT.
	IF ERROR-CODE = "X"
		MOVE SPACE TO ERROR-CODE
		MOVE 39 TO J
		PERFORM CURSOR
		GO TO ACCEPT-CHG.
	PERFORM CLEAN-IT.
	MOVE 39 TO J.
	PERFORM CURSOR.
	DISPLAY DATA-A (K).
	IF THE-ACTION = "ADD" GO TO LOOP-VALUE.
	GO TO FIND-NUMBER.
CHECK-SLASH.
	IF ALL-2 = "E"
		GO TO END-VALUE.
	MOVE ALL-23 TO NUM-IT-2.
	EXAMINE ALL-23 REPLACING ALL SPACES BY ZEROS.
	IF (ALL-23 NOT NUMERIC) OR (NUM-IT-2 > 15) OR (NUM-IT-2 = ZERO)
		MOVE 50 TO J
		PERFORM CURSOR
		DISPLAY " BAD SWITCH"
		MOVE 39 TO J
		PERFORM CURSOR
		GO TO ACCEPT-CHG.
	MOVE NUM-IT-2 TO L.
	ADD 2 TO L.
	PERFORM CLEAN-IT.
	GO TO LOOP-VALUE.
CLEAN-IT.
	MOVE 45 TO J.
	PERFORM CURSOR.
	PERFORM CLEAR-LINE.
	MOVE 1 TO J.
	PERFORM CURSOR.
	DISPLAY THE-NUMBER THE-TUBE (K) WITH NO ADVANCING.
COMMENT-CHECK.
	MOVE DATA-A (K) TO THE-DATA-A.
	IF DATA-1 NOT = "*" GO TO EDIT-IT.
	PERFORM CLEAR-SCREEN.
	IF THE-ACTION = "CHG"
		DISPLAY "OLD COM" STAR-COMMENT.
	DISPLAY "         1    1    2    2    3    3    4    4    5    5    6    6    7   7".
	DISPLAY "       8901234567890123456789012345678901234567890123456789012345678901234".
	DISPLAY "NEW COM" WITH NO ADVANCING ACCEPT THE-COMMENT.
	MOVE PROG-COMMENT TO PROG-INFO.
	IF THE-ACTION = "CHG"
		PERFORM CHG-REC THRU END-CHG-REC
		PERFORM CLEAR-SCREEN
		GO TO END-IT.
	GO TO END-VALUE.
BAD-NUMBER.
	MOVE 23 TO I.
	MOVE 20 TO J.
	PERFORM CURSOR
	DISPLAY "BAD NUMBER " ELE-NUM.
FIND-REC.
	OPEN I-O PROGRAM-FILE.
	MOVE 1 TO PROGRAM-KEY.
	READ PROGRAM-FILE INVALID KEY
	DISPLAY "BAD READ CHG FILE " PROGRAM-KEY STOP RUN.
	MOVE PROGRAM-RECORD TO PROGRAM-ZERO.
LOOP-CHG.
	ADD 1 TO PROGRAM-KEY.
	IF PROGRAM-KEY > PROGRAM-LAST-REC
		DISPLAY "LOGIC ERROR IN PROGRAM" STOP RUN.
	READ PROGRAM-FILE INVALID KEY
	DISPLAY "BAD READ CHG FILE " PROGRAM-KEY STOP RUN.
	MOVE PROGRAM-RECORD TO PROGRAM-MAIN.
	IF PROGRAM-PAGE NOT = THE-PAGE GO TO LOOP-CHG.
	IF PROGRAM-LINE NOT = THE-LINE GO TO LOOP-CHG.
	MOVE PROGRAM-INFO TO PROG-INFO.
	MOVE FRO-FIL TO DATA-A (1).
	MOVE TO-FIL TO DATA-A (2).
	MOVE TAB-ARR-1 TO DATA-A (3).
	MOVE NUM-ENT TO DATA-A (4).
	MOVE ENT-TAB TO DATA-A (5).
	MOVE LEN-ENT-1 TO DATA-A (6).
	MOVE PAC-BIN-1 TO DATA-A (7).
	MOVE DEC-POS-1 TO DATA-A (8).
	MOVE SEQ-1 TO DATA-A (9).
	MOVE TAB-ARR-2 TO DATA-A (10).
	MOVE LEN-ENT-2 TO DATA-A (11).
	MOVE PAC-BIN-2 TO DATA-A (12).
	MOVE DEC-POS-2 TO DATA-A (13).
	MOVE SEQ-2 TO DATA-A (14).
	MOVE COMMENTS TO DATA-A (15).
END-FIND-REC.
	EXIT.
CHG-REC.
	MOVE PROG-INFO TO PROGRAM-INFO.
	MOVE PROGRAM-MAIN TO PROGRAM-RECORD.
	WRITE PROGRAM-RECORD INVALID KEY
	DISPLAY "BAD WRITE CHG " PROGRAM-KEY STOP RUN.
	CLOSE PROGRAM-FILE.
END-CHG-REC.
	EXIT.
ADD-IT.
	MOVE 3 TO I.
	MOVE I TO L.
LOOP-VALUE.
	ADD 1 TO L.
	IF L > 18 GO TO END-VALUE.
	MOVE L TO I.
	GO TO BY-NUM.
END-VALUE.
	PERFORM CLEAR-SCREEN.
	PERFORM WRITE-ADD THRU END-WRITE-ADD.
	GO TO END-IT.
CURSOR.
	IF THE-TERM = "A" ENTER MACRO CURSER USING I,J.
	IF THE-TERM = "D" ENTER MACRO CA1520 USING I,J.
	IF THE-TERM = "V" ENTER MACRO CAVT52 USING I,J.
	IF THE-TERM = "3" ENTER MACRO CA3300 USING I,J.
	IF THE-TERM = "B" ENTER MACRO CAB100 USING I,J.
CLEAR-SCREEN.
	IF THE-TERM = "A" OR "D"
		ENTER MACRO TTYOUT USING 14.
	IF THE-TERM = "V"
		ENTER MACRO CLVT52.
	IF THE-TERM = "3"
		ENTER MACRO TTYOUT USING 35,37,37,37,37.
	IF THE-TERM = "B"
		ENTER MACRO CLB100.
CLEAR-LINE.
	IF THE-TERM = "A" OR "V" OR "B"
		DISPLAY CLEAR-IT WITH NO ADVANCING.
	IF THE-TERM = "D"
		ENTER MACRO TTYOUT USING 35.
	IF THE-TERM = "3"
		DISPLAY CLEAR-3300 WITH NO ADVANCING.
THE-EDIT.
	IF K = 1 PERFORM EDIT-1 THRU END-EDIT-1.
	IF K = 2 PERFORM EDIT-2 THRU END-EDIT-2.
	IF K = 3 PERFORM EDIT-3 THRU END-EDIT-3.
	IF K = 4 PERFORM EDIT-4 THRU END-EDIT-4.
	IF K = 5 PERFORM EDIT-5 THRU END-EDIT-5.
	IF K = 6 PERFORM EDIT-6 THRU END-EDIT-6.
	IF K = 7 PERFORM EDIT-7 THRU END-EDIT-7.
	IF K = 8 PERFORM EDIT-8 THRU END-EDIT-8.
	IF K = 9 PERFORM EDIT-9 THRU END-EDIT-9.
	IF K = 10 PERFORM EDIT-10 THRU END-EDIT-10.
	IF K = 11 PERFORM EDIT-11 THRU END-EDIT-11.
	IF K = 12 PERFORM EDIT-12 THRU END-EDIT-12.
	IF K = 13 PERFORM EDIT-13 THRU END-EDIT-13.
	IF K = 14 PERFORM EDIT-14 THRU END-EDIT-14.
	IF K = 15 PERFORM EDIT-15 THRU END-EDIT-15.
EDIT-1.
	MOVE DATA-A (1) TO THE-DATA-A.
	MOVE THE-DATA TO FRO-FIL.
	MOVE FRO-FIL TO DATA-A (1).
END-EDIT-1.
	EXIT.
EDIT-2.
	MOVE DATA-A (2) TO THE-DATA-A.
	MOVE THE-DATA TO TO-FIL.
	MOVE TO-FIL TO DATA-A (2).
END-EDIT-2.
	EXIT.
EDIT-3.
	MOVE DATA-A (3) TO THE-DATA-A
	MOVE DATA-16 TO TAB-ARR-1.
	MOVE TAB-ARR-1 TO DATA-A (3).
END-EDIT-3.
	EXIT.
EDIT-4.
	MOVE DATA-A (4) TO THE-DATA-A.
	IF DATA-13 = SPACES
		MOVE DATA-13 TO ENT-NUM
		MOVE NUM-ENT TO DATA-A (4)
		GO TO END-EDIT-4.
	MOVE DATA-13 TO NUM-IT-3.
	EXAMINE DATA-13 REPLACING ALL SPACES BY ZEROS.
	IF DATA-13 NOT NUMERIC GO TO ERROR-4.
	IF ((NUM-IT-3 > ZERO) AND (NUM-IT-3 < 1000))
		MOVE NUM-IT-3 TO ENT-NUM
		MOVE NUM-ENT TO DATA-A (4)
		GO TO END-EDIT-4.
ERROR-4.
	MOVE 50 TO J.
	PERFORM CURSOR.
	DISPLAY " ENTER , , OR 1-999".
	MOVE "X" TO ERROR-CODE.
END-EDIT-4.
	EXIT.
EDIT-5.
	MOVE DATA-A (5) TO THE-DATA-A.
	IF DATA-14 = SPACES
		MOVE DATA-14 TO TAB-ENT
		MOVE ENT-TAB TO DATA-A (5)
		GO TO END-EDIT-5.
	MOVE DATA-14 TO NUM-IT-4.
	EXAMINE DATA-14 REPLACING ALL SPACES BY ZEROS.
	IF DATA-14 NOT NUMERIC GO TO ERROR-5.
	IF ((NUM-IT-4 > ZERO) AND (NUM-IT-4 < 10000))
		MOVE NUM-IT-4 TO TAB-ENT
		MOVE ENT-TAB TO DATA-A (5)
		GO TO END-EDIT-5.
ERROR-5.
	MOVE 50 TO J.
	PERFORM CURSOR.
	DISPLAY " ENTER , , OR 1-9999".
	MOVE "X" TO ERROR-CODE.
END-EDIT-5.
	EXIT.
EDIT-6.
	MOVE DATA-A (6) TO THE-DATA-A.
	IF DATA-13 = SPACES
		MOVE DATA-13 TO LEN-ENT-1
		MOVE LEN-ENT-1 TO DATA-A (6)
		GO TO END-EDIT-6.
	MOVE DATA-13 TO NUM-IT-3.
	EXAMINE DATA-13 REPLACING ALL SPACES BY ZEROS.
	IF DATA-13 NOT NUMERIC GO TO ERROR-6.
	IF ((NUM-IT-3 > ZERO) AND (NUM-IT-3 < 257))
		MOVE NUM-IT-3 TO ENT-LEN-1
		MOVE LEN-ENT-1 TO DATA-A (6)
		GO TO END-EDIT-6.
ERROR-6.
	MOVE 50 TO J.
	PERFORM CURSOR.
	DISPLAY " ENTER , , OR 1-256".
	MOVE "X" TO ERROR-CODE.
END-EDIT-6.
	EXIT.
EDIT-7.
	MOVE DATA-A (7) TO THE-DATA-A.
	IF DATA-1 = SPACE OR "B" OR "P"
		MOVE DATA-1 TO PAC-BIN-1
		MOVE PAC-BIN-1 TO DATA-A (7)
		GO TO END-EDIT-7.
	MOVE 50 TO J.
	PERFORM CURSOR.
	DISPLAY " ENTER , ,B, OR P".
	MOVE "X" TO ERROR-CODE.
END-EDIT-7.
	EXIT.
EDIT-8.
	MOVE DATA-A (8) TO THE-DATA-A.
	IF DATA-1 = SPACE
		MOVE DATA-1 TO DEC-POS-1
		MOVE DEC-POS-1 TO DATA-A (8)
		GO TO END-EDIT-8.
	MOVE DATA-1 TO NUM-IT-1.
	EXAMINE DATA-1 REPLACING ALL SPACES BY ZEROS.
	IF DATA-1 NOT NUMERIC GO TO ERROR-8.
	IF NUM-IT-1 < 10
		MOVE NUM-IT-1 TO DEC-POS-1
		MOVE DEC-POS-1 TO DATA-A (8)
		GO TO END-EDIT-8.
ERROR-8.
	MOVE 50 TO J.
	PERFORM CURSOR.
	DISPLAY " ENTER , , OR 0-9".
	MOVE "X" TO ERROR-CODE.
END-EDIT-8.
	EXIT.
EDIT-9.
	MOVE DATA-A (9) TO THE-DATA-A.
	IF DATA-1 = SPACE OR "A" OR "D"
		MOVE DATA-1 TO SEQ-1
		MOVE SEQ-1 TO DATA-A (9)
		GO TO END-EDIT-9.
	MOVE 50 TO J.
	PERFORM CURSOR.
	DISPLAY " ENTER , ,A, OR D".
	MOVE "X" TO ERROR-CODE.
END-EDIT-9.
	EXIT.
EDIT-10.
	MOVE DATA-A (10) TO THE-DATA-A.
	MOVE DATA-16 TO TAB-ARR-2.
	MOVE TAB-ARR-2 TO DATA-A (10).
END-EDIT-10.
	EXIT.
EDIT-11.
	MOVE DATA-A (11) TO THE-DATA-A.
	IF DATA-13 = SPACES
		MOVE DATA-13 TO LEN-ENT-2
		MOVE LEN-ENT-2 TO DATA-A (11)
		GO TO END-EDIT-11.
	MOVE DATA-13 TO NUM-IT-3.
	EXAMINE DATA-13 REPLACING ALL SPACES BY ZEROS.
	IF DATA-13 NOT NUMERIC GO TO ERROR-11.
	IF ((NUM-IT-3 > ZERO) AND (NUM-IT-3 < 257))
		MOVE NUM-IT-3 TO ENT-LEN-2
		MOVE LEN-ENT-2 TO DATA-A (11)
		GO TO END-EDIT-11.
ERROR-11.
	MOVE 50 TO J.
	PERFORM CURSOR.
	DISPLAY " ENTER , , OR 1-256".
	MOVE "X" TO ERROR-CODE.
END-EDIT-11.
	EXIT.
EDIT-12.
	MOVE DATA-A (12) TO THE-DATA-A.
	IF DATA-1 = SPACE OR "B" OR "P"
		MOVE DATA-1 TO PAC-BIN-2
		MOVE PAC-BIN-2 TO DATA-A (12)
		GO TO END-EDIT-12.
	MOVE 50 TO J.
	PERFORM CURSOR.
	DISPLAY " ENTER , ,B, OR P".
	MOVE "X" TO ERROR-CODE.
END-EDIT-12.
	EXIT.
EDIT-13.
	MOVE DATA-A (13) TO THE-DATA-A.
	IF DATA-1 = SPACE
		MOVE DATA-1 TO DEC-POS-2
		MOVE DEC-POS-2 TO DATA-A (13)
		GO TO END-EDIT-13.
	MOVE DATA-1 TO NUM-IT-1.
	EXAMINE DATA-1 REPLACING ALL SPACES BY ZEROS.
	IF DATA-1 NOT NUMERIC GO TO ERROR-13.
	IF NUM-IT-1 < 10
		MOVE NUM-IT-1 TO DEC-POS-2
		MOVE DEC-POS-2 TO DATA-A (13)
		GO TO END-EDIT-13.
ERROR-13.
	MOVE 50 TO J.
	PERFORM CURSOR.
	DISPLAY " ENTER , , OR 0-9".
	MOVE "X" TO ERROR-CODE.
END-EDIT-13.
	EXIT.
EDIT-14.
	MOVE DATA-A (14) TO THE-DATA-A.
	IF DATA-1 = SPACE OR "A" OR "D"
		MOVE DATA-1 TO SEQ-2
		MOVE SEQ-2 TO DATA-A (14)
		GO TO END-EDIT-14.
	MOVE 50 TO J.
	PERFORM CURSOR.
	DISPLAY " ENTER , ,A, OR D".
	MOVE "X" TO ERROR-CODE.
END-EDIT-14.
	EXIT.
EDIT-15.
	MOVE DATA-A (15) TO THE-DATA-A.
	MOVE THE-DATA-A TO COMMENTS.
	MOVE COMMENTS TO DATA-A (15).
END-EDIT-15.
	EXIT.
WRITE-ADD.
	OPEN I-O PROGRAM-FILE.
	MOVE 1 TO PROGRAM-KEY.
	READ PROGRAM-FILE INVALID KEY
	DISPLAY "BAD READ " PROGRAM-KEY STOP RUN.
	MOVE PROGRAM-RECORD TO PROGRAM-ZERO.
	MOVE PROGRAM-LAST-REC TO PROGRAM-REC-NO PROGRAM-ACT-REC.
	ADD 1 TO PROGRAM-LAST-REC.
	MOVE PROGRAM-LAST-REC TO PROGRAM-KEY.
	MOVE THE-FILE TO PROGRAM-IDENT.
	MOVE THE-PAGE TO PROGRAM-PAGE.
	MOVE THE-LINE TO PROGRAM-LINE.
	MOVE THE-FORM TO PROGRAM-FORM.
	MOVE PROG-INFO TO PROGRAM-INFO.
	MOVE PROGRAM-MAIN TO PROGRAM-RECORD.
WRITE-ADD-A.
	WRITE PROGRAM-RECORD INVALID KEY
	DISPLAY "BAD WRITE " PROGRAM-KEY STOP RUN.
	MOVE 1 TO PROGRAM-KEY.
	MOVE PROGRAM-ZERO TO PROGRAM-RECORD.
	WRITE PROGRAM-RECORD INVALID KEY
	DISPLAY "BAD WRITE " PROGRAM-KEY STOP RUN.
	CLOSE PROGRAM-FILE.
END-WRITE-ADD.
	EXIT.
END-IT.
	MOVE PROGRAM-NAME TO THE-FILE.
	MOVE "RPGSYS" TO NEXT-PROGRAM.
	ENTER MACRO SYSPRG USING NEXT-PROGRAM, PASS-IT.
END-PROGRAM.
	STOP RUN.