Trailing-Edge
-
PDP-10 Archives
-
k20v7b
-
field-image/xdml.hlp
There are 2 other files named xdml.hlp in the archive. Click here to see a list.
[XDML.HLP] Jun-84
XDML is a DBMS-20 utility to interactively access a database.
DML commands are preceeded with an asterisk (*)
Required keywords are capitalized
User supplied names are lower case
Guide words appear in parenthesis ()
Command descriptions are preceeded by --
! indicates a choice
[] encloses optional choice
{} encloses an option group, from which only one must be chosen
%% encloses an option group, from which many can, but at least
one must be chosen
... indicates the preceeding option may be repeated
o ACCEPT [record-name!data-name1[,data-name2]...]
-- Accept data from terminal
-- (Defaults to current of run-unit record name if any).
o ASSIGN (Command) {user-command-name!DEFAULT-COMMAND} (to key)
{BLACK!BLUE!COMMA!DASH!DOWN-ARROW!EIGHT!
ENTER!FIVE!FOUR!LEFT-ARROW!NINE!ONE!
PERIOD!PF1!PF2!PF3!PF4!RED!RIGHT-ARROW!
SEVEN!SIX!THREE!TWO!UP-ARROW!ZERO}
-- Bind a User Defined Command to a Keypad Key.
o BLANK (Screen)
-- Clear full terminal screen or lower half of screen if
-- Bachman diagram display is on.
o CALCHN record-name
-- Compute a Calc Chain value.
* CLOSE [ALL!AREA area-name1[,area-name2]...!JOURNAL!RUN-UNIT]
-- CLOSE a resource (Default is RUN-UNIT).
* CLOSE TRANSACTION [transaction-name]
-- End a defined or default transaction.
o DAYTIME
-- Display current Day, Date and Time.
o DDT (mode)
-- Enters DDT if secondary command level ENABLEd.
-- Type RET$X to return.
o DEASSIGN (Command Assigned to Key)
{BLACK!BLUE!COMMA!DASH!DOWN-ARROW!EIGHT!
ENTER!FIVE!FOUR!LEFT-ARROW!NINE!ONE!
PERIOD!PF1!PF2!PF3!PF4!RED!RIGHT-ARROW!
SEVEN!SIX!THREE!TWO!UP-ARROW!ZERO}
-- Disconnect a User Defined Command from a Keypad Key.
o DECLARE (Commands and Keypad Assignments From) filespec
(With) [[No] Verification]
-- Restore a preserved command environment (see PRESERVE).
-- (Default filespec is DSK:.DCA.0).
-- (Default is no Verify Schema/Sub-Schema names and version number).
o DEFINE (Command Named) user-command-name
-- Define a new command from existing commands, terminate with END.
* DELETE [record-name] [ALL!ONLY!SELECTIVE]
[MEMBERS [FROM set-name1[,set-name2]...]]
-- Delete record(s).
* DELETE TRANSACTION [transaction-name]
-- Rollback a defined or default transaction.
o DISABLE (Administrative Capabilities)
-- Disallow Secondary Level Commands
o DISPLAY [record-name!data-name1[,data-name2]...]
-- Display data from UWA. Synonym D or DIS.
-- (Defaults to current of run-unit record-name if any).
o ENABLE (Administrative Capabilities)
-- Allow Secondary Level Commands
o END (Definition of Command)
-- Ends definition of "DEFINEd" user command.
o EXIT
-- Terminate XDML. Requires confirmation if areas open for update.
o FETCH rse
[SUPPRESS [{ALL!%AREA!RECORD!{SET!set-name1[set-name2]...}%}]
[CURRENCY] [UPDATES]]
-- Performs a FIND, GET, [DISPLAY] sequence.
* FIND rse
[SUPPRESS [{ALL!%AREA!RECORD!{SET!set-name1[set-name2]...}%}]
[CURRENCY] [UPDATES]]
-- Find record matching the specified Record Selection Expressions
-- listed below (rse1 through rse6). Synonym F.
rse1 FETCH/FIND [record-name] USING identifer!literal-DBKey
-- Direct FIND. Synonyms FIND1, F1.
rse2 FETCH/FIND [OWNER [IN] set-name-1 [OF]] CURRENT [OF]
{area-name AREA!record-name RECORD!
RUN-UNIT!set-name-2 SET}
-- FIND CURRENT form. Synonyms FIND2, F2.
rse3 FETCH/FIND {FIRST!LAST!NEXT!PRIOR!integer}
[record-name] RECORD [OF] {area-name AREA!set-name SET}
-- FIND NEXT form. Synonyms FIND3, F3.
rse4 FETCH/FIND OWNER [RECORD] [OF] set-name [SET]
-- FIND OWNER form. Synonyms FIND4, F4.
rse5 FETCH/FIND [[NEXT] DUPLICATE [WITHIN]] record-name[RECORD]
-- Calc key FIND. Synonyms FIND5, F5.
rse6 FETCH/FIND record-name VIA CURRENT [OF] set-name
USING data-name1[,data-name2]...
-- Sort Key FIND. Synonyms FIND6, F6.
* GET [record-name [data-name1[,data-name2]...]]
-- Move CRU record to UWA.
o HELP (with XDML)
-- Type this text.
* INSERT [record-name] INTO {set-name1[,set-name2]...!ALL [SETS]}
-- Link a record into set occurrences.
* INVOKE SUB-SCHEMA sub-schema-name [OF] SCHEMA schema-name
-- Specify a sub-schema to use for this XDML run.
o INTERCEPT ALL!NONE!%[NO] CALL![NO] JOURNAL![NO] SYSTEM!
[NO] UNANTICIPATED![NO] UPDATE%
-- Change Exception INTERCEPTion if secondary command level ENABLEd.
o JRTEXT string
-- Write a text string to the Journal.
o LOG {I-O!INPUT!OUTPUT} [APPEND] filespec!
NO {I-O!INPUT!OUTPUT}
-- Enable or Disable LOGging.
* MODIFY [record-name [data-name1[,data-name2]...]]
-- Alter the contents of an existing record.
* MOVE [CURRENCY] STATUS [FOR] {area-name AREA!record-name RECORD!
RUN-UNIT!set-name SET}
TO DBKey-identifier
-- Access Currency Registers. Synonym M. (Defaults to RUN-UNIT).
o NOTE ALL!NONE!%[NO] CALL![NO] JOURNAL![NO] SYSTEM!
[NO] UNANTICIPATED![NO] UPDATE%
-- Change Exception NOTEing.
* OPEN [{ALL!AREA area-name1[,area-name2]...}
[USAGE-MODE [IS] [EXCLUSIVE!PROTECTED]
{RETRIEVAL!UPDATE}]
-- Enable access to one or more database areas
-- (Default is OPEN ALL USAGE-MODE IS RETRIEVAL).
* OPEN JOURNAL USAGE-MODE [EXCLUSIVE] UPDATE
-- Enable access to the Journal.
* OPEN TRANSACTION [transaction-name]
-- Initiate a defined or default transaction.
o PRESERVE (Commands and Keypad Assignments in) output-filespec
-- Save User Defined Commands in a file (see DEFINE)
-- (Defaults for filespec are DSK:.DCA.-1).
o PUSH (Command level)
-- Push to a new EXEC with LOGOUT disabled.
o QUIT (Temporarily)
-- Temporarily return to the EXEC if secondary command level ENABLEd.
-- Use CONTINUE to Continue.
o REDISPLAY (Bachman Diagram)
-- Redisplay the Bachman Diagram on a VT100 class terminal.
* REMOVE [record-name] FROM {set-name1[,set-name2]...!ALL [SETS]}
-- Unlink a record from a set occurrence.
-- (Default is ALL SETS).
o RESET {INTERCEPT!NOTES}
-- Restore ENCL Exception handling to initial state.
o SET ARROW-KEYS (to Find) {AREA [area-name]!SET [set-name]}
-- Set Arrow Keys' FIND mode. (See keypad default commands below).
-- (Initial default is SET).
o SET DATA-INTERPRETATION-MODE (to) {COBOL!FORTRAN}
-- Change XDML's view of certain language specific data types
-- (Initial default is FORTRAN-MODE).
o SET DBKEY FORMAT (to) {PAGE-AND-LINE!SINGLE-INTEGER}
-- Set DBKey I/O Format (Initial default PAGE-AND-LINE).
o SET DBKEY RADIX (to) {DECIMAL!OCTAL}
-- Set DBKey I/O Radix (Initial default is DECIMAL).
o SET DISPLAY (of) BACHMAN-DIAGRAM (to) {OFF!ON}
-- Enable/Disable display of Bachman Diagram.
-- (Initial default ON for VT100 class terminals).
o SET DISPLAY CURRENCY-UPDATES (to) {OFF!ON}
-- Enable/Disable automatic Currency display. (Initial default OFF).
o SET DISPLAY (of) ERROR DATA {OFF!ON}
-- Enable/Disable ERROR-DATA message display (Initial default ON).
o SET DISPLAY (of) ERROR STATUS {OFF!ON}
-- Enable/Disable ERROR-STATUS message display (Initial default ON).
o SET DISPLAY (of) FETCHED-DATA (to) {OFF!ON}
-- Enable/Disable automatic display of Fetched data.
-- (Initial default ON).
o SET ECHO (for) TAKE-FILE (Commands to) {OFF!ON}
-- Enable/Disable TAKE File command echoing (Initial default OFF).
o SET ECHO (for) USER-DEFINED-COMMAND (Commands to) {OFF!ON}
-- Enable/Disable User-Defined command echoing (Initial default OFF).
o SET KEYPAD-MODE (to) {APPLICATION!NUMERIC}
-- In Application mode ASSIGNed commands may be executed.
-- (Initial default is APPLICATION).
o SET STATS-TIME-COLLECTION (to) {OFF!ON}
-- Enable/Disable Collection of Time Statistics for STATS
-- (Initial default OFF).
o SHOW BUFFER-ADDRESSES (for Area) area-name
-- Type out buffer addresses and page number contained in them
-- if secondary command level is ENABLEd.
o SHOW [CURRENCY [ALL!AREA [area-name1[,area-name2]...]!
RECORD [record-name1[,record-name2]...]!
RUN-UNIT!SET [set-name1[,set-name2]...]]]
-- Display all or named currency registers of specified type.
-- (Default for SHOW is SHOW CURRENCY ALL).
o SHOW DATABASE-INFORMATION
-- Displays information about the currently invoked database.
o SHOW KEYPAD-ASSIGNMENTS
-- Display the keypad keys with associated commands.
-- Default keypad assignments are:
Up-Arrow (FIND OWNER RECORD OF <current-set> SET)
Down-Arrow (FIND FIRST RECORD OF <prompt> AREA/SET)
Left-Arrow (FIND PRIOR RECORD OF <current-area/set> AREA/SET)
Right-Arrow (FIND NEXT RECORD OF <current-area/set> AREA/SET)
PF1 (Bachman Window to Far Left)
PF2 (Bachman Window Half Screen Left)
PF3 (Bachman Window Half Screen Right)
PF4 (Bachman Window to Far Right)
-- where <current-area/set> is set by SET ARROW-KEYS
-- and <prompt> prompts the user for current-area/set.
o SHOW USER-DEFINED-COMMAND (Named) user-command-name
-- Show the definition of a user command.
o SHOW LOCATION-AND-DESCRIPTION (of) data-name
-- Display DDL description, address of in-core Data Block,
-- and UWA Byte Pointer if secondary command level is ENABLEd.
o STATS (display) [ZERO]
-- Display DBCS Statistics. ZERO displays and resets.
* STORE record-name [SUPPRESS [{ALL!%AREA!RECORD!
{SET!set-name1[set-name2]...}%}]
[CURRENCY] [UPDATES]]
-- Place a new record in the database.
o TAKE (Commands from) filespec
-- Executes commands from an XDML command file. Synonym T.
o TRANSLATE [{ERD!ERROR-DATA!ERROR-STATUS!ERS} exception-code]
-- Give a description of an exception code.
-- (Defaults to current ERD and ERS values in SYSCOM).
o TYPE text
-- Type "text" on terminal.
o UNDEFINE (User Defined Command Named) user-command-name
-- Removes definition of a user-defined command.
o ;comment or command;comment
command !comment! rest-of-command
-- Comment facilities (exclamation points do not indicate choice).
When "?" is typed, keywords are listed so that at least the
capitalized portion must be typed to form a unique match. For
example, since there are INSERT and INVOKE commands, they are
listed as "INSert" and "INVoke".
[End of XDML.HLP]