Trailing-Edge
-
PDP-10 Archives
-
msv11ck
-
10,7/mail/ms/msmcmd.mac
There are 7 other files named msmcmd.mac in the archive. Click here to see a list.
;This software is furnished under a license and may only be used
; or copied in accordance with the terms of such license.
;
;Copyright (C) 1979,1980,1981,1982 by Digital Equipment Corporation
; 1983,1984,1985,1986 Maynard, Massachusetts, USA
TITLE MSMCMD - Misc MS commands
SEARCH GLXMAC,MSUNV,MACSYM
TOPS20< SEARCH MONSYM>
PROLOG (MSMCMD)
CPYRYT
MSINIT
.DIRECTIVE FLBLST
SALL
;Define globals
GLOBS ; Storage
GLOBRS ; Routines
;Globals defined elsewhere
EXTERNAL BINOUT,MOVST0,CRIF,CRLF,TTINI,NETFLG,RJ.AMA,RJ.VMA
TOPS20< EXTERNAL UNMAPF>
EXTERNAL ABREL,ADRLST,ALCSB,ATMBUF,AUTCMT,AUTEXP,BLKTIM,CFIELD
EXTERNAL CJFNBK,CKEXIT,CLOSEF,CMDTAB,COMPAC,COUNTS,CPYATM,CRFDEV
EXTERNAL CRFDIR,CRFDTB,CRFPRT,DEFCC,DFCMTB,EXPRNC,F%NO,FILPGS,FILSIZ
EXTERNAL FLAGS2,FSPEC,GET1,GETHLP,GO,HD%KWD,HDITAB,HDTNAM,HLPTAB,HLPTXT
EXTERNAL HOSTAB,INIFOB,INIIFN,ININAM,INIP,KWDLST,LASTRD,LIBVER,MINWSZ
EXTERNAL MOVDSP,MOVHDO,MVALST,NDELET,NFLAGD,OHSNMX,PERSON,RCMDTB,RECEN0
EXTERNAL REDNOV,REDPTR,RELFOB,RELSB,REPADD,RFIELD
TOPS20< EXTERNAL RUNFIL,RUNFL0,RUNFL2>
EXTERNAL SCMDTB,SCRBTM,SCRLFL,SCRREG,SCRRGR,SENNOV,SENPTR,SETIOJ,SETNOV
EXTERNAL SETPTR,SHCMTB,STCMT0,STCMTB,STRBSZ,SVMFOB,TBADDS,TOPNOV,TOPPTR
EXTERNAL TYPE1,UNSEEN,V52FLG
TOPS10< EXTERNAL CTX,ECHOON,MSGFD,MYPPN,CRFFDH>
INTERNAL BLANK0,.BBORD,.BLANK,.CREAT,.ECHO,.FINIS,.HELP
INTERNAL .PUSH,.QUINI,.QUIT,.SET,.SHADL,.SHDEF,.SHHDI
INTERNAL .SHINT,.SHOW,.SHSYN,.STATU,.STAUF,.STAUT,.STBFD
INTERNAL .STCDI,.STCLZ,.STCNC,.DAYTI
INTERNAL .STCPR,.STDCC,.STDFT,.STDLC,.STEXP,.STHLP,.STHPR
INTERNAL .STINC,.STNO,.STOHS,.STPNM,.STPN1,.STRAD,.STRPA,.STRPS
INTERNAL .STSPH,.STSUM,.STVID,.STWSZ,.TAKE,.VERSI,MSGOD0,.MSGOD
INTERNAL KWDREL, .TAKE0, SUMMRY, .STEX0
INTERNAL .STLGD,.STCND,.STFDI
TOPS20< INTERNAL .MAILR>
SUBTTL TAKE command (used for init file)
.TAKE: NOISE (commands from)
MOVE T,TAKPTR ; Init IFN stack pointer
TOPS10< CALL ECHOON > ; In case monitor command
TOPS20<
HRROI A,[ASCIZ /CMD/] ; default extension
MOVEM A,CJFNBK+.GJEXT ; ..
>;End TOPS20
TOPS10<
SETZM CJFNBK ; Zero previous defaults
MOVE A,[CJFNBK,,CJFNBK+1]
BLT A,CJFNBK+CJFNLN-1
MOVSI A,(SIXBIT /CMD/) ; Default only the extension
MOVEM A,CJFNBK+.FDEXT
>;End TOPS10
CALL FSPEC ; get filespec
JRST [ WARN (No file specified)
RET]
HLRE C,T ; First check room on the stack
MOVN C,C ; Get size of area left
CAIGE C,3 ; Need three words
JRST [ MOVE C,FOB.FD(B) ; No room, point to FD for error msg
CALL CRIF ; Get to left margin
$TEXT (KBFTOR,<?Command files nested too deeply, detected in opening ^F/(C)/>)
CALLRET RELFOB] ; Release FOB and give failure return
PUSH T,A ; Save FOB info
PUSH T,B ; ..
$CALL F%IOPN ; Open the file
JUMPF [ POP T,B ; Recover FOB info
POP T,A ; ..
HRRZ C,FOB.FD(B) ; For error message
$TEXT (KBFTOR,<?Can't open command file ^F/(C)/ because: ^E/[-1]/>)
CALLRET RELFOB] ; Release chunks
.TAKE0: PUSH T,A ; Push IFN onto take stack
MOVEM T,TAKPTR ; Preserve stack pointer
CALLRET SETIOJ ; Set up COMND I/O pointers and return
SUBTTL Help command for structured help file
;First word on each page of help file is topic name
.HELP: STKVAR <<.HELP1,4>> ; Temp space for 2 FLDDBs
NOISE (with topic)
SKIPN HLPTAB ; ..
CALL HLPINI ; No, get one then
SKIPN HLPTAB ; Did we make it?
RET ; Nope, give up.
DMOVE A,[FLDDB. (.CMCFM)]
DMOVEM A,.HELP1
DMOVE A,[FLDDB. (.CMKEY)]
DMOVEM A,2+.HELP1
MOVE A,HLPTAB ; Pointer to help keyword table
MOVEM A,2+.CMDAT+.HELP1 ; Init FLDDB block
MOVEI A,2+.HELP1 ; Chain the blocks together
HRRM A,.CMFNP+.HELP1 ; ..
MOVEI A,.HELP1 ; Point to the chain
CALL RFIELD ; Parse user response
MOVE A,CR.COD(A) ; Get function parsed
CAIN A,.CMCFM ; Just CR typed?
JRST [ $TEXT (KBFTOR,<
Type "help topic" to get help with a particular topic. Type
"help ?" to get a list of all the topics for which help is available.
If this is the first time you have used MS, type "help introduction".
>)
RET]
HRRZ C,(B) ; Get character address of topic
CONFRM
MOVE A,HLPTXT ; Point to first byte
ADJBP C,A ; Point to topic
.HELP0: ILDB A,C ; Get next byte
SKIPE A ; Last byte?
CAIN A,14 ; or form feed?
CALLRET CRLF ; Yes, crlf and quit
$CALL KBFTOR ; No, type this char
JRST .HELP0 ; and go for next
;Parse help file -- adds each topic name to TBLUK-style table
; Each page of the help file starts with the topic name
HLPINI: ACVAR <HPTR,LOC> ; Ptr to help text, loc of topic name
STKVAR <HLPST0> ; Topic name addr, temp string space
CALL GETHLP ; Read help file
SKIPN HPTR,HLPTXT ; Point to it, if it's there
RET ; Not there, GETHLP couldn't open it.
SETZB D,LOC ; First topic is at byte zero
JRST HLPIN3 ; Go find first topic name
;Here with HPTR pointing to first byte of a topic name
HLPIN4: MOVE B,[POINT 7,STRBUF] ; Temporary storage for string
MOVEI C,<STRBSZ*5>-1 ; Maximum bytes in the string
HLPIN0: ILDB A,HPTR ; Get next byte of topic name
JUMPE A,HLPINX ; Null -- end of help text
CAIE A,15 ; Anything funny terminates it
CAIN A,12
AOJA D,HLPIN1 ; Count chars
CAIE A,11 ; Tab
CAIN A,40 ; Space
AOJA D,HLPIN1
IDPB A,B ; Nonfunny - store char
SOJLE C,[MOVE A,[POINT 7,STRBUF] ; Name too long -- point to fragment
WARN (Topic name too long -- %1S)
AOJA D,HLPIN1] ; Just truncate the name
AOJA D,HLPIN0 ; Go get next char
HLPIN1: SETZ A, ; Insure ASCIZ
IDPB A,B ; ..
MOVE A,[POINT 7,STRBUF] ; Point to topic name string
CALL COUNTS ; Count the bytes
CALL ALCSB ; Allocate a string block
JRST [ WARN <Can't build HELP table, insufficient memory>
RET]
MOVEM B,HLPST0 ; Save address of string
MOVE A,B ; Set up for MOVST0
HRLI A,(POINT 7,) ; Form kosher byte pointer
MOVEI B,STRBUF ; Point to string parsed
CALL MOVST0 ; Copy to string space
HRLZ B,HLPST0 ; Get string addr of topic name in LH
HRR B,LOC ; Put char addr of this topic in RH
MOVEI A,HLPTAB ; Addr of ptr to TBLUK table
CALL TBADDS ; Add the entry
JUMPF [ WARN (Problem building help topic table)
CALL CRLF
JRST .+1]
HLPIN2: ILDB A,HPTR ; Next char of help text
JUMPE A,HLPINX ; Null -- end of help file
ADDI D,1 ; Count chars
CAIE A,14 ; Look for form feed
JRST HLPIN2 ; Not yet
HLPIN3: ILDB A,HPTR ; Skip to first non-white-space char
JUMPE A,HLPINX ; Null means end of help text
CAIE A,15 ; ..
CAIN A,12 ; ..
AOJA D,HLPIN3 ; Count chars
CAIE A,40 ; Space
CAIN A,11 ; Tab
AOJA D,HLPIN3 ; Count chars
MOVNI A,1 ; Back up so ILDB at HLPIN0 works
ADJBP A,HPTR ; ..
MOVEM A,HPTR ; ..
MOVEM D,LOC ; Save char addr of next topic
JRST HLPIN4 ; Go add it to table
HLPINX: MOVE A,HLPTAB ; Done, compact table
CALLRET COMPAC ; and return
SUBTTL BBOARD - Bulletin board reader
.BBORD: NOISE (from file)
TXZ F,F%F2 ; Allow printing of file status
TXZ F,F%RSCN ; Don't return to EXEC after reading file
TOPS20<
MOVX A,GJ%OLD ; Must exist
MOVEM A,CJFNBK+.GJGEN
HRROI A,[ASCIZ /POBOX:/] ; Default to PS:<logged-in-directory>
MOVEM A,CJFNBK+.GJDEV
HRROI A,[ASCIZ /BBOARD/]
MOVEM A,CJFNBK+.GJDIR
HRROI A,[ASCIZ /MAIL/]
MOVEM A,CJFNBK+.GJNAM
HRROI A,[ASCIZ /TXT/]
MOVEM A,CJFNBK+.GJEXT
>;End TOPS20
TOPS10<
SETZM CJFNBK ; First zero the block
MOVE A,[CJFNBK,,CJFNBK+1]
BLT A,CJFNBK+CJFNLN-1
MOVE A,[SIXBIT /PUB/]
MOVE A,CJFNBK+.FDSTR
MOVE A,[SIXBIT /MAIL/]
MOVEM A,CJFNBK+.FDNAM
MOVSI A,(SIXBIT /TXT/)
MOVEM A,CJFNBK+.FDEXT
MOVE A,[1,,6]
MOVEM A,CJFNBK+.FDPPN
>;End TOPS10
MOVEI A,[FLDDB. .CMFIL]
CALL CFIELD
TXZ F,F%AMOD
TXO F,F%MOD ; Like system-messages...
JRST GET1
SUBTTL MSGOD - Message of the day
.MSGOD: CONFRM
TXZ F,F%RSCN ; Don't uselessly return to EXEC if EXEC cmd
MSGOD1:
TOPS20<
MOVX A,GJ%SHT!GJ%OLD!GJ%PHY ; Existing file, physical-only
HRROI B,[ASCIZ /POBOX:<SYSTEM>MAIL.TXT.1/]
GTJFN ; Get JFN on system message file
ERJMP [WARN (No system message file)
RET]
MOVE B,A ; Copy JFN to b for GET1
TXO F,F%MOD ; Set flag for system mail
JRST GET1 ; Now get file
>;End TOPS20
TOPS10<
STKVAR <SYSFD>
MOVEI A,FDXSIZ ; Get a chunk for an FD
$CALL M%GMEM ; ..
JUMPF [ WARN (Can't read system message file -- insufficient memory)
RET]
MOVEM B,SYSFD
HRLZM A,.FDLEN(B) ; Stuff its length
MOVSI A,'STD' ; Where file lives
MOVEM A,.FDSTR(B)
MOVE A,[SIXBIT /MAIL/]
MOVEM A,.FDNAM(B)
MOVE A,[SIXBIT /TXT/]
MOVEM A,.FDEXT(B)
TXO F,F%MOD ; Set funny flag
CALL GET1 ; Read, parse file
MOVEI A,FDXSIZ ; Release the FD now
MOVE B,SYSFD ; ..
$CALL M%RMEM ; ..
RET
>;End TOPS10
; Auto MOD stuff
MSGOD0: CALL MSGOD1 ; Commom get routine
MOVEI A,NXTNEW ; Setup message sequencer
MOVEM A,NXTMSG
MOVE L,MSGSEQ ;**
ADD L,[POINT 18,0]
CALL STQDL2 ; Create msg sequence
CALL TYPE1 ; Use type routine (New)
PUSH P,[GO] ; In case continue
TOPS20< CALL UNMAPF> ; Unmap it
CALL CLOSEF ; Close and release lock on message file
CALLRET CKEXIT ; Now exit
.ECHO: MOVEI A,[FLDDB. (.CMTXT)]
CALL RFIELD ; Parse arbitrary text
CONFRM
MOVE A,[POINT 7,ATMBUF]
CALL KBFTOR ; Type the string and return
CALL CRLF
$CALL K%FLSH ; Empty the buffer
RET
.QUIT: NOISE (MS)
CONFRM ; Confirm first
CALLRET CKEXIT
;Quit from MS Create-init>> mode without writing init file
.QUINI: NOISE (without updating init file)
CONFRM
MOVE A,INIIFN ; Close the init file
$CALL F%RREL ; Release without writing
DMOVE A,INIFOB ; Release chunks associated with file
CALL RELFOB ; ..
SETZM INIIFN
RET
;Finish creating init file (close init file nicely)
.FINIS: NOISE (and update init file)
CONFRM
MOVE A,INIIFN
$CALL F%REL ; Close file
DMOVE A,INIFOB ; Release chunks associated with file
CALL RELFOB
SETZM INIIFN
RET
.BLANK: NOISE (screen)
CONFRM
SKIPE INIP ; If doing init file,
TXNN F,F%AMOD ; while doing auto MOD,
SKIPA ; ..
RET ; Don't blank the screen
BLANK0: SKIPN V52FLG ; Doing screen clearing?
JRST BLANK2 ; No, skip this
$CALL K%FLSH ; Yes, insure TTY buffers flushed
SKIPN BLKTIM ; Are we possibly delayed here?
JRST BLANK1 ; No, just do it then
$CALL I%NOW ; Get current date/time
SUB A,BLKTIM ; Get interval to next OK time for clearing
JUMPGE A,BLANK1 ; Interval already passed, just do it
MOVN A,A ; Get positive delay time (fractions of a day)
IDIVI A,<<1,,0>/<^D24*^D60*^D60>> ; Compute seconds (from UDT format)
JUMPE A,BLANK1 ; Not enough time left to care about
$CALL I%SLP ; OK, sleep that amount before clearing
BLANK1: MOVE A,V52FLG ; Get clear-screen sequence pointer
CALL BINOUT ; Type it
CALL @SCRRGR ; Undo any scroll-region junk
SETZM SCRLFL ; Reset scroll-region flag
BLANK2: $CALL K%FLSH ; Dump TTY output
SETZM BLKTIM
RET
;Create-init-file
.CREAT: NOISE (for setting permanent defaults)
CONFRM
TXZ F,F%RSCN ; Don't uselessly return to EXEC
MOVE T,TAKPTR ; Insure not from command file
MOVE A,(T) ; Get input IFN
CAIE A,.PRIIN ; Better be TTY
JRST [ CMERR (Create-init-file command not allowed inside command file)
RET]
CALL ININAM ; Do common init filespec build
RET ; Failure, msg already typed
DMOVEM A,INIFOB ; Save FOB size and address
$CALL F%IOPN ; See if already exists
JUMPF .CREA0 ; No, this is OK then
WARN <Superseding existing init file>
$CALL F%REL ; Release input IFN
.CREA0: DMOVE A,INIFOB ; Get FOB pointers again
$CALL F%OOPN ; Open for output
MOVEM A,INIIFN ; remember the IFN
TXNE F,F%CONC ; concise mode?
RET ; yes, return now
CITYPE (<
Give commands whose effects you wish to have remembered as permanent
defaults (for example, SET PERSONAL-NAME, SET CONCISE-MODE, etc.).
Commands which cause actions (READ, SUMMARIZE NEW, etc.) will be executed
every time MS starts up. Give the QUIT command to leave this mode
without changing anything, or the FINISH command to make your
changes permanent.>)
CALL CRLF
RET
SUBTTL Set commands
.SET: NOISE (parameter)
TXZ F,F%NO ; Note "no" not typed yet
SKIPN INIP ; If not in init file,
TXZ F,F%RSCN ; then don't uselessly return to EXEC
MOVE A,SETPTR ; Point to command set
.SET0: CALL RFIELD
HRRZ A,(B)
CALL (A)
TXZ F,F%NO
RET
;No
.STNO: TXO F,F%NO ; Remember "no" typed
MOVEI A,[FLDDB. (.CMKEY,,STCMT0)]
JRST .SET0 ; table without "no" in it
;Set include-me-in-replies
.STINC: CONFRM
TXNE F,F%NO ; "no" typed?
TXZA F,F%RPIN ; yes, clear include-me flag
TXO F,F%RPIN ; set it
RET
;Set brief-address-list-display
.STBFD: CONFRM
TXNE F,F%NO
TXZA F,F%BREF
TXO F,F%BREF
RET
;Set Personal-name <text>
.STPNM: NOISE (used in outgoing mail)
TXZE F,F%NO ; "No" typed?
JRST [ CONFRM
SETZ A, ; Yes, flush personal name
JRST .STPN4]
MOVEI A,[FLDDB. (.CMTXT,CM%SDH,,<
Your full name, as you'd like it to appear in mail you send
>)]
CALL RFIELD
.STPN1: LDB A,[POINT 7,ATMBUF,6]
JUMPE A,.STPN4 ; If null arg given, zap whole word
CALL CPYATM ; Allocate string block, copy string to it
JRST [ WARN <Can't set personal name, insufficient storage>
RET]
.stpn4: EXCH A,PERSON ; Stuff address of new string
caie a,0 ; Was anything there before?
jrst relsb ; Yes, return through deallocation routine
RET ; OK, normal return
SUBTTL Set commands - SPCCHK - check for special characters
;Check for special characters in string (per RFC822)
;
; specials = "(" / ")" / "<" / ">" / "@" ; To use in a word,
; / "," / ";" / ":" / "\" / <"> ; word must be a
; / "." / "[" / "]" ; quoted-string.
; / " " (Not per spec but VMS is a bit slow witted)
;
;Call: B/ Byte pointer to ASCIZ string to be checked
;
;Return +1: Specials found, or quoted string not closed
; +2: No specials found
SPCCHK: $SAVE <A,B> ; Be safe
SPCCH0: ILDB A,B ; Check for no-no characters
JUMPE A,[RETSKP] ; Return on end of string
CAIE A,"("
CAIN A,")"
JRST SPCCH2 ; Parentheses not allowed (per RFC733)
CAIE A,"<" ; Check for all no-no chars
CAIN A,">"
JRST SPCCH2
CAIE A,"@"
CAIN A,","
JRST SPCCH2
CAIE A,";"
CAIN A,":"
JRST SPCCH2
CAIE A,"\"
CAIN A,"."
JRST SPCCH2
CAIE A,"["
CAIN A,"]"
JRST SPCCH2
CAIN A," "
JRST SPCCH2
CAIE A,42 ; Start of quoted string?
JRST SPCCH0 ; No, keep checking
SPCCH1: ILDB A,B ; Yes, eat chars in quoted string
JUMPE A,[WARN <Unterminated quoted string>
RET] ; Give bad return
CAIE A,42 ; Close of quoted string?
JRST SPCCH1 ; No, keep eating chars
JRST SPCCH0 ; Yes, return to ordinary mode
SPCCH2: RET ; Failure
SUBTTL Set commands - continued
;Set default reply-to-all
.STRPA: CONFRM
TXO F,F%RPAL
RET
;Set default reply-to-sender-only
.STRPS: CONFRM
TXZ F,F%RPAL
RET
;Set experience-level
.STEXP: NOISE (to)
MOVEI A,[FLDDB. (.CMKEY,,<[2,,2
CMD (Expert,0)
CMD (Novice,1)]>,,<novice>)]
CALL CFIELD ; Parse keyword and confirm
HRRZ A,(B) ; Get magic number
MOVEM A,EXPRNC ; Save in good place
.STEX0: MOVE B,[[FLDDB. (.CMKEY,,CMDTAB)]
[FLDDB. (.CMKEY,,TOPNOV)]](A) ; Top level
MOVEM B,TOPPTR
MOVE B,[[FLDDB. (.CMKEY,,RCMDTB,,<next>)]
[FLDDB. (.CMKEY,,REDNOV,,<next>)]](A) ; Read level
MOVEM B,REDPTR
MOVE B,[[FLDDB. (.CMKEY,,SCMDTB)]
[FLDDB. (.CMKEY,,SENNOV)]](A) ; Send level
MOVEM B,SENPTR
MOVE B,[[FLDDB. (.CMKEY,,STCMTB)]
[FLDDB. (.CMKEY,,SETNOV)]](A) ; Set commands
MOVEM B,SETPTR
CAIE A,1 ; Novice mode?
RET ; No, quit now
TXO F,F%NSUM!F%PRSN!F%BREF ; Default flag settings for novices
TXZ F,F%CONC ; Not concise mode
MOVEI A,^D8 ; set text-scroll-region (to) 8 (lines)
MOVEM A,MINWSZ ; ..
RET
;Set closing-text
.STCLZ: NOISE (to)
MOVEI A,[FLDDB. (.CMTXT)]
CALL CFIELD ; Parse text and confirm
SKIPE A,CLZTXT ; Release old, if any
CALL RELSB ; ..
SETZM CLZTXT ; ..
CALL CPYATM ; Copy new to string block
JRST [ WARN <Insufficient memory>
WARN <Closing text ignored>
RET]
MOVEM A,CLZTXT ; Store address of new block
RET
;Set [no] concise-mode
.STCNC: CONFRM
TXNE F,F%NO ; "no" typed?
TXZA F,F%CONC ; yes, clear flag
TXO F,F%CONC ; no, set concise flag
RET
;Set [no] directory-lookup-confirmation
.STDLC: jrst .stfdi
; CONFRM
; MOVX A,F2%NDC ; Get "no directory-lookup-confirmation" bit
; TXNE F,F%NO ; "no" typed?
; IORM A,FLAGS2 ; Yes, set bit
; TXNN F,F%NO ; Otherwise
; ANDCAM A,FLAGS2 ; clear it
; RET
;Set default
.STDFT: MOVEI A,[FLDDB. (.CMKEY,,DFCMTB)]
CALL RFIELD
HRRZ A,(B) ; Get routine address
CALL (A)
RET
;Set [no] force-directory-lookup
.STFDI: CONFRM
TXNE F,F%NO
TXZA F,F%FDIR
TXO F,F%FDIR
RET
;Set [no] summary-on-printer-output
.STHLP: CONFRM
TXNE F,F%NO ; "no" typed?
TXZA F,F%HLPT ; Yes, clear the flag
TXO F,F%HLPT ; No, set it
RET
SUBTTL Set commands - .STCDI - set default directory
.STCDI: TRVAR <<DIR0,10>> ; Full directory name space
SETZM CJFNBK
NOISE (to)
MOVE A,[CJFNBK,,CJFNBK+1]
BLT A,CJFNBK+CJFNLN-1
TOPS10< MOVEI A,[FLDDB. (.CMKEY,,CRFDTB,,,[FLDDB. (.CMOFI,CM%SDH,,<Path spec>)])]>
TOPS20< MOVEI A,[FLDDB. (.CMKEY,,CRFDTB,,,[FLDDB. (.CMDIR)])]>
CALL RFIELD ; Get keyword or directory name
MOVE A,CR.COD(A) ; Get function parsed
TOPS20< CAIE A,.CMDIR ; Directory name typed?>
TOPS10< CAIE A,.CMOFI>
JRST [ HRRZ A,0(B) ; Get routine addr for keyword
CALLRET 0(A)] ; Do it and return
.STCD1:
TOPS20<
HRROI A,DIR0 ; Where to put directory name
DIRST ; Remember it
JCERR (Bad directory name)
MOVEI B,DIR0 ; Point to directory spec
HRLI B,(POINT 7,) ; ..
MOVE A,[POINT 7,CRFDEV] ; First do device name
.STCD2: ILDB C,B ; Get next byte of device name
IDPB C,A
CAIE C,":" ; Do until colon
JRST .STCD2 ; Do for all chars in device field
SETZ C, ; Make sure a null is at the end
IDPB C,A ; ..
IBP B ; Skip opening wedge
MOVE A,[POINT 7,CRFDIR] ; Where to put directory name
.STCD4: ILDB C,B ; Get next byte of directory name
CAIN C,76 ; (This is a closing wedge) until closing wedge
JRST [ SETZ C, ; Done, insure ASCIZ
IDPB C,A ; ..
RET] ; and quit
IDPB C,A ; Stuff it
JRST .STCD4 ; Go for more
;Connected-directory and logged-in-directory keywords
.STCND: SKIPA C,[.JIDNO] ; Connected
.STLGD: MOVEI C,.JILNO ; Logged-in
CONFRM
SETO A, ; This job
HRROI B,D ; -length,,where to put it
GETJI
JFCL
MOVE B,D ; Get dirnum in right AC for DIRST
CALLRET .STCD1 ; Go join common code
>;End TOPS20
TOPS10<
MOVE A,[CJFNBK+.FDPPN,,CRFDIR]
BLT A,CRFDIR+FDXSIZ-.FDPPN
RET
.STCND: SETZM CRFDIR ; Connected = current path
RET
.STLGD: MOVE C,MYPPN ; Logged-in
MOVEM C,CRFDIR
MOVE C,[CRFDIR+1,,CRFDIR+2]
SETZM CRFDIR+1
BLT C,CRFDIR+FDXSIZ-.FDPPN
RET
>;END TOPS10
SUBTTL Set commands - continued
;set default protection (for created files)
.STCPR: NOISE (for created files)
TOPS10< MOVEI A,[FLDDB. (.CMNUM,,^D8,,<157>)]>
TOPS20< MOVEI A,[FLDDB. (.CMNUM,,^D8,,<775200>)]>
CALL RFIELD
TOPS20<
HRROI A,CRFPRT ; Where to put protection string
MOVX C,^D8 ; Radix
NOUT
JFCL
>;End TOPS20
TOPS10<
MOVEM B,CRFPRT ; On TOPS10, save octal number
>;End TOPS10
RET ; Common return
;Set [no] summary-personal-name-only
.STHPR: CONFRM
TXNE F,F%NO ; "no" typed?
TXZA F,F%PRSN ; Yes, clear bit
TXO F,F%PRSN ; No, set bit
RET
;Set auto-expunge (on) <condition>
.STAUT: NOISE (on)
MOVEI A,[FLDDB. (.CMKEY,,AUTCMT)]
CALL RFIELD ; Read keyword
HRRZ D,(B) ; Get value of this keyword
CONFRM
MOVEM D,AUTEXP ; Save for later
RET
;set auto-fill
.STAUF: TXNE F,F%NO ; 'set no auto-fill'?
JRST [ CONFRM ;[ESM]
MOVX A,<1B9> ; Yes, clear break-on-tab
ANDCAM A,TXTMS2 ; ..
MOVX A,<1B0> ; and break-on-space
ANDCAM A,TXTMS2+1 ; ..
RET]
NOISE (at column) ; 'set auto-fill'
MOVEI A,[FLDDB. (.CMNUM,,^D10,,<60>)]
CALL CFIELD ; Get fill column and confirm
MOVEM B,FILCOL ; Save it
MOVX A,<1B9> ; set break-on-tab
IORM A,TXTMS2 ; ..
MOVX A,<1B0> ; and break-on-space
IORM A,TXTMS2+1 ; ..
RET
SUBTTL Set commands - .STDCC - set [no] default-cc-list
.STDCC: TXNE F,F%NO ; "no" typed?
JRST [ CONFRM ; yes, confirm it
JRST .+1]
SKIPE B,DEFCC ; Any current list?
CALL ABREL ; Yes, release it
CALL ADRLST ; Parse an address list
RET ; Error msg already type
MOVEM A,DEFCC ; Stuff address
RET
;Set [no] type-initial-summary
.STSUM: CONFRM
TXNE F,F%NO ; "no" typed?
TXOA F,F%NSUM ; Yes, set "no-summary" bit
TXZ F,F%NSUM ; No, clear bit so summary gets typed
RET
SUBTTL Set commands - continued
;Set reply-address (supplies "Reply-to: addr" in sent mail)
.STRAD: STKVAR <PTR> ; Pointer to current A-block
TXZE F,F%NO ; set no reply-address?
JRST [ CONFRM ; Yes, confirm
SKIPE B,REPADD ; Release A-blocks
CALL ABREL ; ..
SETZM REPADD ; Zap list
RET] ; and quit
NOISE (to)
SKIPE B,REPADD ; Any existing addresses?
CALL ABREL ; Yes, release their A-blocks
SETZM REPADD ; Empty list
CALL ADRLST ; Parse some addresses
CMERR (Can't allocate memory for address blocks)
MOVEM A,REPADD ; Save pointer to list
RET
;Set [no] video-mode
.STVID: CONFRM
CALL TTINI ; Re-init TTY parameters
TXNN F,F%NO ; Default is video mode
RET
SETZM V52FLG ; Hmmm... OK, insure no fancy video stuff
MOVEI A,[RET]
MOVEM A,SCRREG
MOVEM A,SCRRGR
MOVEM A,SCRBTM
RET
;Set text-scroll-region
.STWSZ: TXNE F,F%NO ; 'set no text-scroll-region'?
JRST [ CONFRM ; Yes, zap it
SETZM MINWSZ
RET]
NOISE (to)
MOVEI A,[FLDDB. (.CMNUM,,^D10,,<8>)]
CALL RFIELD
PUSH P,B
NOISE (lines)
CONFRM
POP P,B
CAIG B,2 ; Check for unreasonable values
JRST [ WARN <Value too small, ignored>
RET]
MOVEM B,MINWSZ ; Save
RET
SUBTTL Set commands - .STOHS - set [no] only-headers-shown
.STOHS: NOISE (to)
CALL ZAPOHS
.STOH1: MOVEI A,[FLDDB. .CMFLD,CM%SDH,,<
The names of the only header items you wish displayed when showing
messages, separated by commas. If you don't specify any particular
header items to display, they will all be displayed. Header items
are things like Subject, Date, To, cc, Reply-to, and so forth.
>]
CALL RFIELD
LDB A,[POINT 7,ATMBUF,6]
JUMPE A,R ; Insure something typed
CAIE A,15 ; If nothing typed, quit now
CAIN A,12
RET
CALL CPYATM ; Copy the header-item name into a string block
JRST [ WARN <Insufficient memory>
RET]
AOS B,OHSN ; Increment number of header-names given
CAILE B,OHSNMX ; Too many given?
CERR (Too many header items given)
MOVEM A,OHSPTR-1(B) ; Save pointer to it
MOVEI A,[FLDDB. .CMCFM,,,,,[FLDDB. .CMCMA]]
CALL RFIELD
MOVE A,CR.COD(A) ; Get function parsed
CAIN A,.CMCMA ; Comma typed?
JRST .STOH1 ; Yes, go get another header name
RET ; Confirm - finished
;Empty the only-headers-shown table, return storage to free pool
ZAPOHS: SKIPN E,OHSN ; Anything there?
RET ; No, quit now
MOVN E,E ; Negate count
HRLZ E,E ; Form AOBJN ptr
ZAPOH0: SKIPE A,OHSPTR(E) ; Get next block's address
CALL RELSB ; Release it if there is one
SETZM OHSPTR(E) ; ..
AOBJN E,ZAPOH0 ; Loop through all entries
SETZM OHSN ; No more entries
RET ; Done!
SUBTTL Set commands - .STSPH - set suppressed-headers
.STSPH: STKVAR <TBL0>
TXNE F,F%NO ; "NO" typed?
JRST [ CONFRM
SKIPN A,CNCLHD ; See if previous defs
RET ; No, quit
SETZM CNCLHD
CALLRET KWDREL] ; Yes, release and quit
NOISE (to be)
MOVEI A,^D100 ; Space for keyword table
$CALL M%GMEM ; Allocate it
MOVEM B,TBL0 ; Remember presence
MOVEI A,^D99 ; Maximum number of entries
MOVEM A,(B) ; Init TBLUK-style table
MOVE A,B ; Set up for KWDLST
CALL KWDLST ; Parse keywords and stuff into table
MOVE A,TBL0 ; Get address of table
CALL COMPAC ; Compact the table, release unused space
MOVE A,TBL0 ; Get address of table
HLRZ B,(A) ; Get count of entries presented
JUMPE B,[MOVE A,TBL0 ; None, just release storage
CALLRET KWDREL] ; and quit
SKIPE A,CNCLHD ; If something already defined,
CALL KWDREL ; release it
SKIPE OHSN ; Warn if conflicting commands given
WARN <There is an overriding "set only-headers-shown" command in effect>
MOVE A,TBL0
MOVEM A,CNCLHD ; Stuff table address and return
RET
;Release storage for dynamically allocated keyword table
; and associated string blocks
;Call: A/ address of table
KWDREL: PUSH P,E ; Need this register
PUSH P,A ; Save address of table
HLLZ E,(A) ; Get number of entries used
JUMPE E,KWDRL1 ; If table empty, this is easy
MOVN E,E ; Form AOBJN pointer to them
HRRI E,1(A) ; ..
KWDRL0: HLRZ A,(E) ; Get address of string block
CALL RELSB ; Release it
AOBJN E,KWDRL0 ; Do for all
KWDRL1: POP P,B ; Address of table
HRRZ A,(B) ; Length
ADDI A,1 ; Account for header word
$CALL M%RMEM ; Release it
POP P,E ; Restore work reg
RET
SUBTTL Show commands - .SHDEF - show defaults
.SHOW: NOISE (information about)
MOVEI A,[FLDDB. (.CMKEY,,SHCMTB)]
CALL RFIELD
HRRZ A,(B) ; Get routine address
CALL (A) ; Go do it up
RET
;Show internal-information
.SHINT: CONFRM
SKIPE HOSTAB ; Any host table yet?
IFSKP. ; Nope, so say so
$TEXT (KBFTOR,< The Host name cache is empty.>)
ELSE. ; Otherwise
HLRZ A,@HOSTAB ; Get the number of used slots
HRRZ B,@HOSTAB ; And the table size
$TEXT (KBFTOR,< The Host name cache has ^D/A/ out of ^D/B/ slots in use.>)
ENDIF. ; rejoin main stuff
SKIPE A,HLPTAB
HLRZ A,(A) ; and HLPTAB
$TEXT (KBFTOR,< HLPTAB contains ^D/A/ entries.>)
$CALL M%FPGS ; Get the available free pages
$TEXT (KBFTOR,< There are ^D/A/. free memory pages available.>)
$TEXT (KBFTOR,< The largest block of pages is ^D/B/. pages long.>)
SKIPN A,TXTTOT
IFSKP.
$TEXT (KBFTOR,< The text buffer contains ^D/A/ characters.>)
ELSE. ;
$TEXT (KBFTOR,< The text buffer is empty.>)
ENDIF. ;
RET
;Show defaults
.SHDEF: CONFRM
$TEXT (KBFTOR,< set auto-expunge (on) ^A>)
MOVE A,AUTEXP
HRRO A,[[ASCIZ /exit-command-only/]
[ASCIZ /any-exit/]
[ASCIZ /exit-command-only/]
[ASCIZ /never/]](A)
$CALL KBFTOR
CALL CRLF
SKIPE A,FILCOL ; Fill column set?
$TEXT (KBFTOR,< set auto-fill (at column) ^D/A/>)
TXNE F,F%BREF
$TEXT (KBFTOR,< set brief-address-list-display>)
SKIPE A,CLZTXT ; Any closing text?
JRST [ HRLI A,(POINT 7,) ; Yes, display it
$TEXT (KBFTOR,< set closing-text (to) ^Q/A/>)
JRST .+1]
TXNE F,F%CONC ; Concise mode?
$TEXT (KBFTOR,< set concise-mode>)
SKIPE A,DEFCC ; Default cc list?
CALL [ $TEXT (KBFTOR,< set default cc-list (to) ^A>)
MOVE B,[$CALL KBFTOR] ; What to do with each char
MOVEM B,MOVDSP ; ..
MOVEI X,^D26 ; Initial horizontal position
CALL MVALST ; Type the address list
CALLRET CRLF]
$TEXT (KBFTOR,< set default directory (to) ^A>)
SKIPN CRFDIR ; Any directory set?
JRST [ $TEXT (KBFTOR,<connected-directory>)
JRST .SHDE0] ; No, punt then
TOPS20<
HRROI A,CRFDEV ; Show device and directory
$CALL KBFTOR
MOVEI A,"<" ; Punctuate
$CALL KBFTOR
HRROI A,CRFDIR ; Directory name
$CALL KBFTOR
MOVEI A,">"
$CALL KBFTOR
CALL CRLF
>;End TOPS20
; ..
; ..
TOPS10<
$TEXT (KBFTOR,<^F/CRFFDH/>)
>
.SHDE0: SKIPN CRFPRT
JRST .SHD00
$TEXT (KBFTOR,< set default protection (for created files) ^A>)
TOPS20<
HRROI A,CRFPRT
$CALL KBFTOR
>;End TOPS20
TOPS10<
$TEXT (KBFTOR,<^O3R0/CRFPRT/^A>)
>;End TOPS10
CALL CRLF
.SHD00: $TEXT (KBFTOR,< set default ^A>) ; Type state of reply switch
TXNN F,F%RPAL
$TEXT (KBFTOR,<reply-to-sender-only>)
TXNE F,F%RPAL ; Reply-to-all default?
$TEXT (KBFTOR,<reply-to-all>)
TXNE F,F%HLPT
$TEXT (KBFTOR,< set summary-on-printer-output>)
$TEXT (KBFTOR,< set ^A>)
MOVX A,F2%NDC ; No directory confirmation?
TDNE A,FLAGS2 ; ..
$TEXT (KBFTOR,<no ^A>)
$TEXT (KBFTOR,<directory-lookup-confirmation>)
TXNE F,F%RPIN ; Flag on?
$TEXT (KBFTOR,< set include-me-in-replies>)
SKIPN A,MINWSZ ; Get text scroll region size
JRST [ $TEXT (KBFTOR,< set no text-scroll-region>)
JRST .SHDE2]
$TEXT (KBFTOR,< set text-scroll-region (to) ^D/A/ (lines)>)
.SHDE2: SKIPE A,OHSN ; Any only-headers-shown?
JRST [ CALL SHOOHS ; Yes, show them
JRST .SHDE1]
SKIPE D,CNCLHD ; Suppressed headers?
JRST [ $TEXT (KBFTOR,< set suppressed-headers ^A>)
MOVE A,D
CALL .SHHK0
CALL CRLF
JRST .SHDE1]
.SHDE1: SKIPE PERSON ; Personal name?
JRST [ $TEXT (KBFTOR,< set personal-name ^A>)
HRRO A,PERSON ; Yes, show it
$CALL KBFTOR
CALL CRLF
JRST .+1]
SKIPE REPADD ; Any reply-address?
JRST [ $TEXT (KBFTOR,< set reply-address ^A>)
MOVEI X,^D19 ; Init horizontal position
MOVE A,[$CALL KBFTOR]
MOVEM A,MOVDSP
MOVE A,REPADD ; Point to address list
CALL MVALST ; Type it
CALL CRLF
JRST .+1]
TXNE F,F%PRSN ; set summary-personal-name-only?
$TEXT (KBFTOR,< set summary-personal-name-only>)
TXNE F,F%NSUM
$TEXT (KBFTOR,< set no type-initial-summary>)
SKIPN SVMFOB ; Any outgoing-messages file?
RET ; No, all done
MOVE A,SVMFOB+1 ; Yes, point to FOB
MOVE A,FOB.FD(A) ; Point to FD
$TEXT (KBFTOR,< save outgoing-messages (in file) ^F/(A)/>)
RET
;Display only-headers-shown
; A/ contents of OHSN (number of headers shown)
SHOOHS: MOVN E,A ; Form AOBJN ptr
HRLZ E,E ; ..
$TEXT (KBFTOR,< set only-headers-shown (to) ^A>)
TXZ F,F%F1 ; Remember nothing typed yet
MOVEI X,^D29 ; Init horizontal position
SHOOH0: HRRZ C,OHSPTR(E) ; Get ptr to next name
TXON F,F%F1 ; Anything typed yet?
JRST SHOOH1 ; No, skip this then
HRROI A,[ASCIZ /, /] ; Yes, get comma space in case needed
ADDI X,2 ; Account for horizontal movement
MOVE B,LINEW ; Get terminal line width
SUBI B,^D16 ; Leave reasonable margin
CAIL X,(B) ; Time to wrap line yet?
JRST [ HRROI A,[ASCIZ /, -
/] ; Yes, get the string to do it
MOVEI X,4 ; Reset horizontal position
JRST .+1]
$CALL KBFTOR ; Type the comma
SHOOH1: HRLI C,(POINT 7,) ; Form byte pointer
SHOOH2: ILDB A,C ; Next char of header name
JUMPE A,SHOOH3 ; Stop on null
$CALL KBFTOR
ADDI X,1 ; Update horizontal position
JRST SHOOH2
SHOOH3: AOBJN E,SHOOH0 ; Do for all
CALLRET CRLF ; CRLF and return
SUBTTL Show commands - show aliases and show address-lists
.SHADL: TDZA U,U ; Match no bits for address-lists
.SHSYN: MOVX U,AB%INV ; Bits to match for aliases
CONFRM
HLLZ E,@KWDTBL ; Get count of entries in keyword table
JUMPE E,R ; If none, just quit
MOVN E,E ; Form AOBJN ptr
HRR E,KWDTBL ; Point to first entry
ADDI E,1 ; Skip header word
MOVE A,[$CALL KBFTOR] ; What to do with chars of address string
MOVEM A,MOVDSP ; ..
.SHSY0: HRRZ A,(E) ; Get pointer to block for next entry
CAIN A,SYSCOD ; SYSTEM?
JRST .SHSY9 ; Yes, skip it
MOVE B,AB.FLG(A) ; Get flags for this entry
XOR B,U ; Match ones we're interested in?
JUMPN B,.SHSY9 ; No, skip this one
HLRZ B,(E) ; Yes, Get the synonym name pointer
HRLI B,(POINT 7,) ; Make byte ptrs
SETZM UPDX ; Horizontal postion where TOR can get to it
$TEXT (.SHSY8,< ^Q/B/ = ^A>)
MOVE X,UPDX ; Get horizontal position
TXO F,F%LCL ; Don't type our own host name
CALL MVALST ; Move address list
TXZ F,F%LCL
MOVEI B,[BYTE (7) 15, 12, 0] ; CRLF
CALL MOVSB2 ; ..
.SHSY9: AOBJN E,.SHSY0
RET
;Call this to type chars of synonym, updates column position
.SHSY8: AOS UPDX ; Count columns
$CALL KBFTOR
RET
SUBTTL Show commands - show header-items (defined by user)
.SHHDI: NOISE (defined by user)
CONFRM
SKIPN A,HDITAB ; Anything?
RET ; No
HLLZ E,(A) ; Get number of header-items defined
JUMPE E,R ; Just quit if none
MOVN E,E ; Form AOBJN pointer
HRR E,A ; ..
ADDI E,1 ; Skip header word
MOVE A,[$CALL KBFTOR]
MOVEM A,MOVDSP ; Instruction to handle each character
.SHHD0: HLRZ A,(E) ; Point to name of item
HRRZ B,(E) ; Point to H-block
MOVE C,HD.FLG(B) ; Get flags and type
TXNE C,HD%OPT ; Fetch appropriate words
MOVE D,[POINT 7,[ASCIZ /optional/]]
TXNE C,HD%PDF
MOVE D,[POINT 7,[ASCIZ /predefined/]]
TXNE C,HD%RQD
MOVE D,[POINT 7,[ASCIZ /required/]]
ANDI C,HD%TYP ; Isolate type field
MOVE C,HDTNAM(C) ; Get word for this type
$TEXT (KBFTOR,< define header-item ^Q/A/ (to be) ^Q/D/ ^Q/C/ ^A>)
MOVE A,HD.FLG(B) ; Get type field
MOVEI C,HD%TYP ; Isolate type code
AND C,A ; .. *** should use LOAD
; LOAD C,HDTYP,A ; Get type code
CAIN C,HD%KWD ; Keyword?
JRST [ CALL .SHHDK ; Yes, display possible keywords
JRST .SHHD1] ; Continue
TXNN A,HD%PDF ; Predefined?
JRST .SHHD1 ; No, all done with this one then
ANDI A,HD%TYP ; ***Should use LOAD
; LOAD A,HDTYP(B) ; Get type of this header-item
TXO F,F%LCL ; Don't type local host name
EXCH A,B ; Set up ACs correctly for MOVHDO
CALL @MOVHDO(B) ; Display if predefined
.SHHD1: CALL CRLF
TXZ F,F%LCL
AOBJN E,.SHHD0
RET
;Display keywords, B points to H-block
.SHHDK: MOVE A,HD.DAT+1(B) ; Get address of table
.SHHK0: HLLZ D,(A) ; Get number of elements
JUMPE D,R ; Just quit if table empty
TXZ F,F%F1 ; Init comma flag
MOVN D,D ; Form AOBJN ptr
HRRI D,1(A) ; ..
.SHHK1: HLRZ A,(D) ; Point to string name
HRLI A,(POINT 7,) ; ..
TXOE F,F%F1 ; Comma typed yet?
$TEXT (KBFTOR,<, ^A>) ; No, type comma space
$TEXT (KBFTOR,<^Q/A/^A>)
AOBJN D,.SHHK1 ; Do for all keywords
RET
; Type out summary of the current file (status command)
.STATU: NOISE (of current message file)
CONFRM
SKIPG B,MSGJFN ; Have a file?
JRST [ WARN (No current mail file)
RET]
$TEXT (KBFTOR,< Current message file is ^A>)
TOPS20<
PUSH P,B
$CALL K%FLSH
POP P,B
MOVEI A,.PRIOU ; Type filespec on terminal
MOVX C,<1B2+1B5+1B8+1B11+1B14>+JS%PAF
JFNS
TXZ F,F%F1 ; No headers
>;End TOPS20
TOPS10<
$TEXT (KBFTOR,<^F/MSGFD/^A>)
>;End TOPS10
CALL SUMMRY ; Print summary
MOVEI A,1(M) ; M is zero-origin
$TEXT (KBFTOR,< Currently at message ^D/A/.>)
RET
; Print out summary of message file
SUMMRY: MOVE A,LASTM ; Get number of messages
ADDI A,1 ; ..
MOVEI B,[ASCIZ /Last read: %3T/]
; TXNE F,F%MOD ; MOD hack?
; MOVEI B,[ASCIZ /Last login: %3T/]
SKIPG C,LASTRD ; Last read date
MOVEI B,[ASCIZ /Never read/]
SKIPN D,UNSEEN ; Any new messages?
TDZA E,E ; No
MOVEI E,[ASCIZ / (%4D new)/]
HRRZ T,FILPGS ; Number of pages
MOVE U,FILSIZ ; Number of bytes
TOPS20<
CIETYPE < %2S.%C %1D message%P%5S (%7D characters), in %6D disk page%P.
>
>;End TOPS20
TOPS10<
CIETYPE < %1D message%P%5S (%7D characters), in %6D disk block%P.
>
>;End TOPS10
SKIPE D,NDELET ; Check for deleted
ETYPE < (You have %4D message%P deleted.)>
SKIPN A,NFLAGD ; Messages flaged?
RET
MOVX D,M%ATTN ; Bit to check
CAIE A,1 ; Singular or plural?
JRST [ CIETYP < Messages%4L flagged.
>
RET]
CIETYP < Message%4L flagged.
>
RET
; Version command
.VERSI: CONFRM
$TEXT (KBFTOR,< MS version ^V/VERSN./ + GLXLIB version ^V/libver/^M>)
; SKIPN HOSTAB ; If don't know about any nets yet,
; CALL HSTINI ; Find out so can tell user what we know
; TXNE F,F%XMLR ; XMAILR support?
; $TEXT (KBFTOR,< XMAILR support^M>)
TXNE F,F%DECN
$TEXT (KBFTOR,< DECNET support^M>)
TXNE F,F%ARPA
$TEXT (KBFTOR,< ARPANET support^M>)
TXNE F,F%ANFX
$TEXT (KBFTOR,< ANF10 support^M>)
RET
SUBTTL Run network mailer to deliver mail
TOPS20<
; Run mailer to send off what we queued
.MAILR: NOISE (queued messages)
CONFRM
$CALL K%FLSH ; Clear TTY output
TXNN F,F%ARPA!F%DECN ; Net?
IFNSK.
WARN (No network) ; no network to talk to
RET
ENDIF.
TXNE F,F%XMLR ; XMAILR support?
IFNSK.
$TEXT (KBFTOR,<
[MS: Running XMAILR]>)
$CALL K%FLSH ; Push it out before XMAILR starts
HRROI B,[ASCIZ /SYS:XMAILR.EXE/]
CALLRET .MAIL1 ; Yes, excludes all else
ENDIF.
MOVE B,NETFLG
TXNN B,RJ.AMA ;
TXNE F,F%ARPA ; Any non-XMAILR ARPANET mail going out?
IFNSK.
$TEXT (KBFTOR,<
[MS: Running MMAILR]>)
$CALL K%FLSH ; push the message out before MMAILR starts
HRROI B,[ASCIZ /SYS:MMAILR.EXE/]
CALL .MAIL1 ; Yes, send it
ENDIF.
MOVE B,NETFLG
TXNN B,RJ.VMA
TXNN F,F%DECN ; DECNET exists?
RET ; No, quit now
TXNE F,F%ARPA ; Did we run the ARPANET mailer?
CALL CRLF ; clean up after MMAILR
$TEXT (KBFTOR,<
%This version of MS does not use VMAILR or DMAILR to deliver mail.
>)
$TEXT (KBFTOR,<
[MS: Running VMAILR]>)
$CALL K%FLSH ;
HRROI B,[ASCIZ /SYS:VMAILR.EXE/]
CALL .MAIL1 ; go run it
$TEXT (KBFTOR,<
[MS: Running DMAILR]>)
$CALL K%FLSH ; Push out the message
HRROI B,[ASCIZ /SYS:DMAILR.EXE/]
CALL .MAIL1 ; go run DMAILR
RET
.MAIL1: TXO F,F%F3 ; Make sure it doesnt run enabled
CALL RUNFL0
RET
KFORK ; Dont need it any more
MOVE A,[SIXBIT /MS/] ; Restore our name
MOVE B,[SIXBIT /MS/]
SETSN ; ..
JFCL
RET
>; END TOPS20
.PUSH:
TOPS10< NOISE (to monitor level)
CONFRM
SETZB T1,T2
PUSHJ P,CTX ; Push to an alternate context
JFCL ; Oh well
POPJ P, ; All done
>
TOPS20< NOISE (command level)
CONFRM
SKIPLE A,EXECFK ; Already have a fork?
JRST [ CALL RUNFL2 ; Yes, just restart it
SETZM EXECFK ; Hmmm...
RET]
HRROI B,[ASCIZ /DEFAULT-EXEC:/]
CALL RUNFIL ; Else make a fork and run it
RET ; Failure...
MOVEM A,EXECFK ; And keep the fork handle
RET
>;End TOPS20
SUBTTL Random small command routines
.DAYTI: CONFRM
TOPS20<
$CALL K%FLSH
MOVX A,.PRIOU
SETO B,
MOVX C,OT%DAY!OT%FDY!OT%FMN!OT%4YR!OT%DAM!OT%SPA!OT%NSC!OT%TMZ!OT%SCL
ODTIM
>;End TOPS20
TOPS10<
$TEXT (KBFTOR,<^H/[-1]/>) ; Type current date/time
>;End TOPS10
RET
END
; *** Edit 2474 to MSMCMD.MAC by PRATT on 18-Nov-85
; Changes for TOPS10 to make MS.MAC smaller
; *** Edit 2486 to MSMCMD.MAC by PRATT on 22-Nov-85
; Copyright statements
; *** Edit 2614 to MSMCMD.MAC by SANTEE on 18-Dec-85
; Keep the number of messages deleted, new, and flagged up-to-date. This makes
; several paths faster and we end up doing alot less work. Also, with windowing
; it is important on the -10 to know if we have any work to do at expunge time.
; Some minor code rearrangements were made in related areas for speed up
; purposes. Finally some comments were added or lined up and paging was
; adjusted in some places.
; *** Edit 2615 to MSMCMD.MAC by PRATT on 18-Dec-85
; Clean up -20 only symbols that were EXTERN'd in common code and change the
; SHOW message for SET HEADERS-OUTPUT-ON-PRINTER.
; *** Edit 2616 to MSMCMD.MAC by JROSSELL on 18-Dec-85
; When a message is read or typed; or when SKIM, SUMMARIZE, HEADERS, GET or
; NEXT is given - update the last time the mail file was read. On TOPS20 also
; update the FDB.
; *** Edit 2622 to MSMCMD.MAC by PRATT on 23-Dec-85
; Fix "MOVE or DELETE" length invalid error, SET DEF DIR, SET DEF PROT (-10)
; *** Edit 2636 to MSMCMD.MAC by APPELLOF on 15-Jan-86
; Finish SET DEFAULT DIRECTORY for TOPS-10
; *** Edit 2651 to MSMCMD.MAC by SANTEE on 2-Feb-86
; Eliminate the need for MSUTAB at all. Move the few useful lines elsewhere.
; *** Edit 2666 to MSMCMD.MAC by MAYO on 3-Mar-86
; Make the -10's SET {no} DIRECTORY-CONFIRMATION command do the same things as
; the -20's SET FORCE-DIRECTORY-LOOKUP. Using either controls F%FDIR, which
; controls whether GETUSR verifies local usernames.
; *** Edit 2687 to MSMCMD.MAC by MAYO on 25-Mar-86
; The NET command shouldn't bother with VMAILR and DMAILR if NETFLG says they
; aren't useful.
; *** Edit 2703 to MSMCMD.MAC by PRATT on 22-May-86
; In .STCD1, make sure a null gets tacked onto the end of the connected
; structure string (CRFDEV).
; *** Edit 2723 to MSMCMD.MAC by SANTEE on 16-Jun-86
; Update SPCCHK for RFC822. Also add " " to the list of special characters
; because VAXmail is a bit slow witted about user names with spaces.