Trailing-Edge
-
PDP-10 Archives
-
scratch
-
10,7/unscsp/mic/micops.opr
There are 4 other files named micops.opr in the archive. Click here to see a list.
UNIVERSITY OF YORK - COMPUTING CENTRE
MIC - MICOPS.
MIC OPERATIONS MANUAL
april 1983
Reflects features of version 11C(1223) of MIC.
Author: J. D. Service
NOTE
This document is based on the original (1975)
MIC Operations Manual, written at the
Hatfield Polytechnic.
MIC Operations Manual Page 2
UNIVERSITY OF YORK COMPUTING SERVICE - April 1983
Contents.
1. Introduction.
2. Starting MIC up.
3. MIC run time message.
4. Operator information.
5. Stopping MIC.
6. Restarting MIC
7. Operator control of COJOBS.
8. Operator information on COJOBS.
Index.
MIC Operations Manual Page 3
INTRODUCTION
1.0 INTRODUCTION
MIC is a stand alone program which runs detached on a DECsystem-10, and
provides a Macro Interpreted Command language (or job control language) for
terminals and batch users. A full description of MIC functions and uses is
contained in the "MIC USER'S GUIDE".
In a similar fashion to DAEMON, MIC requires to be started by the operator,
but thereafter it requires little operator intervention.
2.0 STARTING MIC UP
As has already been stated MIC must be started up by the operator at system
startup time. In order to do this the operator need simply type (assuming
"MIC.EXE" is on SYS:):-
.R MIC
MIC - VERSION 12C(1213)
DETACHING
.
The above assumes the operator to be logged in as [1,2] and that MIC is not
already running. Conveniently, MIC may be started by the OPSER auto
command file which is run at system startup. The following sequence of
commands performs this function.
:SLOG
:DEF MIC=
R MIC
K/F
NOTE
If MIC is already running when "R MIC" is
typed by the operator, MIC will detect this
and return to monitor mode.
It is most convenient to run MIC via the start up file SYSJOB.INI which is
typed on FRCLIN. MIC may be started by including
LOGIN
MIC
in SYSJOB.INI
MIC Operations Manual Page 4
STARTING MIC UP
2.1 Start Up Problems
Possible problems that may be detected by MIC at startup time (i.e. On an
"R MIC") are:
a) If the ATTACH UUO fails when MIC attempts to "DETACH" then the message
%CAN'T DETACH
will be output. If this error occurs MIC will continue to run successfully
(attached), but a systems programmer should be advised as soon as possible.
b) If MIC is run under a monitor without software interrupts the message
[(MIC)-%(NOPSI) PSI UUO FAILED - MIC WILL USE APRENB UUO - CONTINUING ]
This error requires MIC to be rebuilt to use the alternative APRENB UUO,
however until that is done MIC will run success- fully but auto restarts,
as described in section 3.3, will not be performed for all error
conditions.
As these errors are unlikely to occur in a running MIC no further
information is given here.
3.0 MIC RUN TIME MESSAGES.
Several MIC messages may be output on the system's OPR terminal when MIC is
running. All of these messages have the form
[(MIC) - (code) <text>]
where
code - is a code internal to MIC to assist in debugging MIC problems.
<Text> - is the actual message.
3.1 [(MIC) - (NOMSTR) MIC Not Running - Please Initialise]
This message is output if any user types a DO (or "/") command and the
system operator has not started MIC. This message (which also rings the
OPR bells) will be output every time any user types a MIC command, until
the operator starts MIC up. The users will receive the message
?(NOMSTR) MIC not running - please try again
and will immediately return to monitor mode.
MIC Operations Manual Page 5
MIC RUN TIME MESSAGES.
3.2 [(MIC) - (CORERR) - CORE UUO Failed - Continuing]
This message is output when MIC attempts to expand its core and fails.
(Fifty attempts are made between occurrences of this message). This
problem is non-fatal and implies that no new MIC processes may be started
(i.e. No DO (or "/") commands) until:-
a) Cormax is increased.
b) A running process terminates.
As MIC normally requires a small core allocation this message is unlikely
to occur. If it should occur the most likely cause is indiscriminate use
of recursive (or nested) Macro commands.
3.3 [(MIC) - (MICRSH) MIC HAS CRASHED - RESTARTING]
MIC HAS DETECTED SOME ERROR IN ITSELF WHICH MAKES IT IMPOSSIBLE TO CONTINUE
RUNNING. NORMALLY THIS WILL BE PRECEDED BY THE NORMAL SYSTEM MESSAGE
?ERROR. IN DETACHED JOB n MIC
?PC OUT OF BOUNDS AT USER PC ADDR nnnnnn
which will be output on the OPR terminal. After the output of the crash
message MIC will attempt to restart itself. This is done by first
performing a LOOKUP and RENAME on SYS:MIC.SHR, in order to ensure that a
fresh copy of MIC is read in from disk. MIC then performs a RUN UUO on
SYS:MIC.SHR. Once the new copy of MIC is up and running it detects that
it was started from a detached job, and proceeds to check all lines to see
if any were running MIC when it crashed. If any lines are found, they
have their MIC word cleared and the message
[(MIC) - MASTER PROCESS ERROR - JOB ABORTED]
will be displayed on their terminal.
Should MIC fail to restart itself (e.G. A LOOKUP, or RENAME failure) the
message
[(MIC)-?(NORSTR) CAN'T RESTART]
will be output and the operator must restart MIC manually as described in
section 6.
note:-
1). The auto restart only exists in MIC versions 5(35) and later.
2). Auto restarts will be attempted for the following error conditions
MIC Operations Manual Page 6
MIC RUN TIME MESSAGES.
Illegal UUO.
Illegal Memory reference. ***
Address Check.
Arithmetic Exception.
Pdl overflow. ***
Non-ex. Memory. ***
External Condition.
Those marked with an "***" are the only ones which will be used if the
APRENB UUO is used.
4.0 OPERATOR INFORMATION.
The operator may obtain information on the MIC master process by the
normal system programs (systat etc), and also by the command
.MIC STATUS
where:-
PROCESSES - is the number of MIC processes currently in use.
WAITING - is the number of MIC processes waiting for a process area (I.E.
For MIC to expand core). (Debugging feature).
LOCK. - is the state of the master/slave interlock
(Debugging feature.)
MASTER - is the MIC master process job no.
CMDTOT - is the no. Of MIC process which have been run
NO. - Is the process number.
MODE - is the state of that process.
LINE - is the line no. Of the owner of that process.
MACRO - is the name of the MIC macro running on that process.
ARGS - are the arguments to that process.
NOTE
1) Should master be 0 MIC is not running.
5.0 STOPPING MIC
Should the operator wish to stop MIC he should use the following
procedure:-
.ATT n [1,2] ; where n is the job no. of the master process FROM JOB m
.HALT
.K/F
This procedure is not advised when processes are active, as the associated
TTY lines may be left in an undefined state.
6.0 RESTARTING MIC
Should the operator need to restart MIC after stopping it or some other
problem he need simply type -
.PROTECT SYS:MIC.EXE <166> ; in order to force a fresh copy from disk
.R MIC If this procedure is followed any currently running process will be
superceeded and all new users will use the new MIC. The existing copy
will continue to run but no new users will be able to access it.
7.0 OPERATOR CONTROL OF COJOBS.
An option to MIC is the COJOB feature which allows the user to run his MIC
macros as a separate job. Further details are contained in the "COJOB
USERS GUIDE".
Several control commands are built in to MIC to allow the operator to
control the availability of cojobs on the system. These commands require
the USER to be [1,2] to execute them.
7.1 Operator Control Of COJOB Numbers
A command is provided to allow the operator to govern the number of COJOBS
available. Type
.MIC SET CJREQ n
where n is the maximum number of COJOB'S required - a value between 0 and
MIC Operations Manual Page 8
OPERATOR CONTROL OF COJOBS.
16.
NOTE
1) MIC does not react to a change in the number of required cojobs
immediately, but waits until no MIC processes are active. This
means that there may be some delay in this command taking effect.
2) This value is intially 4, however this is a parameter which may
be reset when MIC is built.
7.2 CONTROL OF THE DEFAULT RUN-TIME OF COJOBS.
This is provided by the command.
.MIC SET DEFTIM n
where n is the number of seconds which a COJOB will be allowed to run.
The USER may override this by the /TIME switch in his COJOB request.
NOTE
If this value is set to -1 then there will be no time limit on
COJOBS.
7.3 Control Of The Maximum Run-time Of COJOBS.
The system operator may also govern the maximum run-time available to
COJOB users by the command -
.MIC SET MAXTIM n
where n is the maximum number of seconds which a COJOB will be allowed to
set in its "/TIME" switch.
NOTE
A value of -1 means no limit.
MIC Operations Manual Page 9
OPERATOR CONTROL OF COJOBS.
7.4 Control Of The Availability Of COJOBS.
The system operator may govern the availability of COJOBS to all users, or
some group of users by the following commands.
.MIC SET NO DATASET
Dataset lines may not now use COJOBS.
.MIC SET NO REMOTE
Remote users may not now use COJOBS.
.MIC SET NO REMSTA
Users at remote stations may not now use COJOBS.
.MIC SET NO PTYCJB
COJOBS may not now be started from a PTY.
.MIC SET NO COJOBS
Nobody may now use COJOBS.
NOTE
The default is that COJOBS are available to all.
8.0 COJOB MESSAGES TO THE SYSTEM OPERATOR.
The COJOB facility in MIC may give rise to a message on the opr terminal.
This has the form:-
[COJOB <name> (macroname) logging error code n - continuing]
where <name> is the COJOB name as described in the COJOB documentation.
N is the error code returned in a LOOKUP or ENTER UUO, block.
This error occurs when a running COJOB is unable to "log" a block of
output in the logfile specified by the user. This is normally a user
error, e.g. Over quota or similar, and requires no operator intervention.
9.0 OPERATOR INFORMATION ON COJOBS.
If the COJOB option is supported by MIC the "status" command will give the
operator some extra information.
.MIC STATUS
MIC Operations Manual Page 10
OPERATOR INFORMATION ON COJOBS.
where most of the extra information is self explanatory.
The only unexplained extra value is the one given in brackets after the
cmdtot, this extra figure is a count of the number of COJOBS run.
Page Index-1
INDEX
Availability of COJOBS . . . . . . . 9
CAN'T DETACH . . . . . . . . . . . . 4
COJOB Messages to the System Operator 9
COJOB numbers . . . . . . . . . . . . 7
CORERR . . . . . . . . . . . . . . . 5
LOGGING ERROR . . . . . . . . . . . . 5
Maximum Run-time . . . . . . . . . . 8
MIC SET DEFTIM . . . . . . . . . . . 8
MICRSH . . . . . . . . . . . . . . . 5
NOMSTR . . . . . . . . . . . . . . . 4
NOPSI . . . . . . . . . . . . . . . . 4
Operator Control of COJOBS . . . . . 7
Operator Information . . . . . . . . 6
Operator Information on COJOBS . . . 9
Restarting MIC . . . . . . . . . . . 7
Run Time Messages . . . . . . . . . . 4
Start up Problems . . . . . . . . . . 4
Starting MIC up. . . . . . . . . . . 3
Stopping MIC . . . . . . . . . . . . 7