PDP-10 Archive: 10,5676/teco/source/tecerr.rel from steco_19840320_1er

Trailing-Edge - PDP-10 Archives - steco_19840320_1er_E35 - 10,5676/teco/source/tecerr.rel

There are 6 other files named tecerr.rel in the archive. Click here to see a list.

0edHS7\R@@R/	 ALWAYS already exists in current command tableThe ALWAYS option of the command 	 table was already in use in the current command table and an FC(q-reg)INSERT command  was done that included the ALWAYS option. P2	 Ambiguous terminal abbreviation The abbreviation  matches the 	 initial parts of more than one terminal type.  More of the name must be typed to make & it unique.  The only valid terminals currently supported are: .  Z	 .Ambiguous terminal parameter .The abbreviation  matches the 	 6initial parts of more than one terminal parameter.  More of the parameter must be typ ?ed to make it unique.  The valid terminal parameters are: .  [	 FAlready existing file The file  already exists.  This error N message should not occur. 3	 QAmbiguous keyword value The keyword  matches more than one  Zvalid keyword argument for the switch . {	 Ambigious switch name /The switch name / matches more that g one switch of  9	 jImproper ArgumentsThe following argument combinations are illegal:
1)	,	(no s argument before comma)
2)	m,n,	(where m and n are numeric terms) 	
S	 zBad EXE directory for The file  has a bad EXE file director y.  This message is not expected to occur. 
)2	 Bad extension for .EXE file The file  has a bad extensi	 on for an .EXE file.  This can only happen on a RUN or GETSEG and is not expected to  occur.

)2 eBadcFCncommand.tableiinQ-register''Anincorrectlyformattedocommando !tablegwasegiven.toTansFCrcommand.oThexpointertforcthe.Q-register''which *contains+thecommandtableiscurrentlyimmediatelyafterthetextwhichNcausedEtheoel2rror.DJFERisnot displayedonhtheEscreen.p;R NCoreelimitmexceededTECOcattemptedcto expandimemoryobeyond theamountyavailabl oWe.oIfRthisisduetothejob'scorelimitbeingexceeded,thecommandmaybetriedagainafter thecorelimitthastbeendincreased. ;y odCanWnot rename across structuresThe.filecan notrbetrenameddascomrossnstructures.<Y oCannottsupercedeedirectorynTheFfileroisaaddirectory fiwle.WThismfileacanmnotdbeosuperceded, becausepitomayfcontainrfiles.ed<r ~FC(Q-reg)DELETE$withoutacommandtabledefinedAnattemptwasmadeto delet eocommandsafromdthencurrentncommandtableCwithoutDtheTcommandatablesbeing defined.AnngFC(Q-reg)INSERT$amustmbeddoneibeforetyouscantdeleteecommandefromritd0Hr DoubledevicetnametOnlyonedevicenameislegalonafilespecification.Adevicenameisdelimited byacolon.I $Double extension is illegal Only one extension is valid on a file -specification. An extension follows a period I4 2Double file name is illegalOnly a single file name is legal in a TOPS- :10 file specification IW =Digit expected after ^O, not A digit was expected after the ^O, and E not . ^O sets the input radix to octal, so there must be a numeric foll Nowing it J3 ODevice not available for The device in was not available W to the user. This is because the device should first be MOUNTed using the MOUNT com `mand to the monitor. KP bThe directory is not empty and can not be deletedThe user can not d kelete non-empty directorys. The directory still contains files. KR sDouble node name is illegal More than one node name is illegal in {a file specification. A node name is delimited by either two colons or an underscore . !KW Device implies path, but a path was givenThe device given is either an ersatz d
extension of .BAK. The file has this extension. +XS EB before current EB file closedAn EB command may not be given while an EB command is already in effect for a file. Give an EK command to abort the current EB c !ommand or an EF command to close the current EB'ed file before giving another EB comm *and. -XW +Error reading message fileAn I/O error has occured while reading the error mess 3age from the error message file. The device status is . .Y2 :Extension is longer than six characters An extension is allowed to b Be only three characters or less in length. is longer than three characters. K 0[ KIllegal EM argument
The argument given to EM must be a positive numb Ter. 10[0 TExceeded network capacity for file The opening of has cau ]sed the network capacity to be exceeded. Try again later. 3 [Q cEN command errorOn an EN command, either there was no input file or the file wa ks opened by an EB command. 4 [R nThe file still has outstanding locks set.The file st will has outstanding locks set for it. The locks must be first removed. This is not e xpected to occur. 6 [X EO argument
is too largeThe argument
given with an EO
command is larger than the standard (maximum) setting of EO= for this ver sion of TECO. This must be an older version of TECO than you think you are using. 7 [p An end of has been encountered.The end of the file ha #s been encountered. This message is not expected to occur. 90[s *ENQ. UUO failed - Error code
The ENQ. for locking the file you are 2editing failed and the error code returned by the operating system is
:P\3 ;ET argument
is out of rangeThe only legal arguments to the ET command Care 0 (normal typeout), 1 (literal typeout), or 2 (image typeout). < ] JEU argument
is out of rangeThe only legal arguments to the EU command Sare -1 (no case flagging), 0 (lower case flagged), or 1 (upper case flagged). = ]7 [File is already being edited.The file is already being cedited by another job. Try again after the other editor is finished. ?h2 jFile is being modifiedThe file is being modified by a snother user. @hV tFC table not allowed for Q-register argumentThe Q-register '' contai }ns a saved FC table and this command does not accept an FC table as an argument. B hw File can not be updatedThe file can not be put in upda te mode. The files is protected against you. Chz found in The file was found in wh ich is different from the path given. EiT File was not foundThe file was not found. FkS 'First argument must be a stringThe first argument to a command must / be a string argument. H~k9 2First argument may not be a stringThe first argument for a command : may not be a string argument. I
kY >Incomplete ... or (...) in a macr FoA macro contained in a Q-register and being executed by an M command contains Oan iteration that is not enclosed within the Q-register by ..., or W a parenthetical expression `that is not closed within the h Q-register by a ). K1 nIllegal control-E command in search stringAn illegal control-E command was wencountered in a search string. The only valid control-E commands are ^EA, ^EV, ^EW, ^ED, ^EL, ^ES, ^Ennn, or ^E[A,B,...]. L r Illegal control-G command in stringA control-G may not be the last character i n an insert or search string. N s Illegal control command '' in text argumentIn order to be entered as text in an insert command or search command, all control characters must be preced "ed by ^R or ^T. Otherwise they are interpreted as commands. The control character ' +' is an undefined text argument control command. Oz 1Illegal FC command typeThe valid command types are: . The pointe 9r in the Q-register is pointing after the invalid keyword. QPQ ?Illegal immediate command tableA command table refers to a PREVIOUS command tab Hle and there is none, or the text to be processed through another command table is in Pcomplete. RP1 RIllegal keyword for commandThe valid keywords for co Zmmands are: T{ ]Illegal command The command is not a valid TECO command. U eIllegal argument in UUO for The argument block for wa ns incorrectly set up. This is an internal TECO error. W tIllegal mode for device The mode specified for the device in | is illegal. X2 ~Illegal operation for DUMP mode filesThe command given is illegal for a fil e open with /MODE:DUMP. Z r Input or output error for file . File status is .An input or o utput error occured for the file . The monitor file status is [ r Illegal ^P or ^Y argument
The argument to an ^P or ^Y command is an a #bsolute page number in the file. It must be greater than the current page number. ] +Illegal project-programmer number in The project programmer number in 4 is illegal. ^ 7Illegal path specification for The file specification co ?ntains an illegal path specification. This error was detected in parsing the file sp Hecification. ` IIllegal command The only valid commands Rare G, L, N, E, C, A, D, Z V, W, T, F, S, and U. a1 bIllegal Q-register name ''The Q-register name specified by a Q, U, X, k G, %, M, W, [, ], ^G, or * command must be a letter (A thru Z), a digit (0 thru 9), s%, *, or a two or more character name enclosed in parentheses. c7 zIllegal search argumentThe argument preceding a search command must be eithe r
a)The number of times a match must be found before the search is consi dered successful, in which case it must be non-zero. If it is negative, the search i s performed in reverse.
b)The boundaries of the search, in which case the first occurrence of the string therein is found. If the second argument is $ greater that the first, the search is performed in reverse. dp +Illegal sequence of UUOs executed for The file may be 3on your library, or TECO has an internal error. f z 8Illegal TMP: functionThe only valid commands for TMP: are ER and EW g @Illegal TTCALL type value
The extended TTCALL command must take the f Horm ':arg1,arg2^T' where arg1 is the (optional) TTCALL argument and arg2 is the TTCAL QL type is decimal. The second argument must be a legitimate TTCALL type, with 0-13 l Yegal except for 3 (OUTSTR). Type 8 (RESCAN) will do a RESCAN unless the is an arg1, bin which case it tests for CCL mode. Other legal values of arg2 are -1 and -2 which jserve to turn the terminal echo on and off, respectively. i pIllegal TMP: file specification The file specification is y not a valid TMP: file specification. A valid file specification for TMP: may only c
ontian a three character file name j0
Invalid character The character is not valid in a file
specification l0Q
Illegal version number in file specificationThe version number specified in t
he file specification is illegal. The correct format of a version number
!is VVMM(EEEE)-W. MM is optional minor version number (as alphabetic characters), -W
)is a single digit octal number from 0 to 7 and the other numbers are octal numbers th
2at must be specified. m0W
4The low segment overlaps the high segment for The low segment for
= overlaps the high segment. This can only occur on a GETSEG and therefore is
Enot expected to occur. o Kt
HThe line number
or

is out of rangeThe screen only has
P lines, so the lines
to

cannot be displayed on the termi
Ynal p Ky
YSub file directories are nested too deeply for The operating system ca
bn not support sub file directories nested as deeply as has. r MV
iMissing 'In attempting to execute a conditional skip command (a co
rmmand whose argument does not
z satisfy the condition) no ' command closing the conditi onal execution can be found. Note that ... ' commands must be complete within a sin %gle macro level. s X8 *Multiply defined tag !!A tag (!!) was found which was alrea 2dy defined previously in the macro. There may only be a single occurance of a given t ;ag in a macro. u Y =Macro ending with '^'A command macro being executed from a Q-register ends with E the '^' character. This is an incomplete command. The '^' command takes a single c Nharacter text argument that must be in the Q-register with the '^'. vY: UMissing first argument for The first argument for the command ] was not present xYP _Missing Q-register name in commandA command macro ends with the com hmand which takes a Q-register name as an argument. The Q-register name m pust be at the same macro level as the command. yZ8 uMissing left angle bracket ()There is a right angle bracket not matched ~by a left angle bracket somewhere to its left. (Note that an iteration must be compl

ete within a single macro level. {[

Missing '('Command string contains a right parenthesis that is not matched by a

 corresponding left parenthesis. |[

Missing right angle bracket ()In attempting to exit from an iteration fie

ld with a ';' command (or to skip over an iteration field with a zero argument) the

' was not closed by a .  Not

/e that the iteration field m

8ust be complete within a sing

@le macro level. ~\P

EMissing right parenthesis ')'The command string contains, within an iteration

N field, a parenthetical expression that is not closed by a right parenthesis or a Q-r

Vegister name is not ended correctly. \X

ZMissing second argument for The second argument for the

c command was not present. \p

fMacro ending with ^^A command macro being executed from a Q-register ends with

n control-^ or ^^.  This is an incomplete command.  The ^^ command takes a single char

wacter text argument that must be in the Q-register with the ^^. ]:

}Nohargument allowedeforycommandAnargumentwasgivento
AttempthtoEBafilecwhichnisnotaoniakdiskidevice.AnsEBncommandewasegiven2fore
hr nretorun.Thisim No log file open for nEL commandAn EL command with a numeric argument was g
iven before the log file was opened with an ELfilespec$ command. (k The user is not logged in.The user is not allowed to run a program unless he is logged in. This is not expected to occur. ~k No previous commandA MAKE, TECO, CREATE, EDIT, READ, or PERUSE command was gi 'ven without a file specification, and no previous command had been given. l .No room for No room on this file structure or the quota is exceeded fo 7r to be created. @lV :Non-numeric Q-register ''The '' Q-register contains text, Bnot a number. kX DNetwork support required for file The file is not on th Le local node. This requires the operating system to support network file operations. U kY UNo such device as The device specified in the file specification ^ does not exist. lr `The file is not a saved fileThe file is not in the for imat of a saved file. The error can only occur from a RUN or GETSEG UUO pls pTerminal does not support screen modeThe terminal type currently in effect yis not supported in screen mode. The E$ command is not available for this terminal ty pe. lv Null subfile directory specifiedIn specifing a sub file directory path all
subfile directories must be specified. ly Null tags are illegalThe O command must specifiy the name of a tag that is defi ned by two exclaimation marks. 0m No text in Q-register ''The '' Q-register did not contain # text. "m $Non-existent device for The device specificed in the fi ,le specification does not exist. #0n 0OTHER already exists in current command tableThe OTHER option of the command t 8able was already in use in the current command table and an FC(q-reg)INSERT command w Aas done that included the OTHER option. %Px2 E'' in octal digit stringIn a digit string preceded by ^O, only the Noctal digits 0 to 7 may be used. &

xz	 QThe file  is not openThe file  is not open for input  Zor output. This message is not expected to occur. (~|	 _Confused use of parenthesisA string of the form (......)...	 h has been encountered.  Par	 penthesis should be used only 	 yto enclose combinatins of nu	 meric arguments.  An iterati	 
on may not be opened and not 	 closed between a left and ri ght parenthesis. )9	  Main stack overflowThe main stack has overflowed. This indicates an internal  (error in TECO. Please report your commands to your systems programmer. +@		 0Q-register stack overflowThe Q-register stack has overflowed. This is caused b 8y pushing too many q-registers onto the Q-register stack with the '[' command. ,@		 @Execution stack overflowThe execution stack has overflowed. This is caused by	 I nesting commands too deeply in angle brackets or having too many nested macro calls, Q or both. .@		 SPartial allocation only for The file  could not have al	 [l of the block requested in the estimated size allocated on the enter of the file. Th dis is not expected to occur. /~p	 gAttempt to move pointer off pageThe argument specified with a J, C, R, or D	 o command must point to a position within the current size fo the buffer, i.e., betwee xn 0 and Z, inclusive. 1x	 zFile protection is out of range /PROTECTION:The file protection mus t be within the range of 000 to 777 octal 2

W	 Protection failure or directory full on a DECtape for The file 	  is protected from either being read or written, or the DECtape that the file  is being written onto is full. 4

Z Page number
istoolargeInprocessinga^Por^Ycommand,-theiendro n$f filetwasreachedbeforertherequestedpageTwasencountered. Atthispointetheredit t-ingebuffer ismempty,hthelastpage ofmthedfilehhasobeen output,andtheKvaluesofo^Pai5snowthe$numberofthelastpageinthefile.5 OA Q-register name is required for the keyword The X keyword requires a Q-register be named in the command. The correct `format of this command is (Q-register)$ 8 Y fAttempt to read from , which is not open for readingAn attempt was mad oe to read from . This file is not open for reading. This is not expected w to occur. :~)0 yAttempt to assign a value to a read only parameterAn EV$ command was given with a numeric argument. The parameter is a read only parameter, i
.e., its value may only be read, not set. ;0+x FC REMOVE command given without previous FC OVERLAY commandThe FC REMOVE comm and is used to remove a command table previously defined with an FC OVERLAY command. It may not be used unless an FC OVERLAY command was done first. =p-w &Second argument (
) less than first (

).In a two argument /K, P, T, or X command, the first argument must not be greater than the second, nor mu 7st the first argument be greater than Z. >86 <Second argument not allowedTwo arguments were given to a command which take Ds at most one argument. @87 GThe job's search list is empty for The job's search list is empty an Od the device specified by is a disk device with no implicit search list. X A@; XSecond argument must be numericThe second argument to a command must a be a numeric value C
;7 cSecond argument must be a stringThe second argument to a command l must be a string argument. D~;9 oInitial search with no argumentA search command with null argument has been giv wen, but there was no preceding search command from which the argument could be taken. F;P The sub file directory for was not foundThe file contain s a path specification to a sub file directory that does not exist. G ;S ';' not in an iterationThe semicolon command may be used only with a string of commands enclosed by angle brackes, i.e., in an iteration field. I

;T The segment is not on the swapping spaceA GETSEG from a locked low s (egment to a high segment which is not a dormant, active, or idle segment occured. Thi 0s is not expected to occur J~;Y 3SFDs nested too deeply in The maximum depth for a sub-file directory <is 5, which the user attempted to exceed with . L;Z BCannot Find ''A search command not preceded by a colon modifier and J not within an iteration has failed to find the specified character string ' S'. If an S, FS, or any negative or bounded search fails, the pointer is positioned [ as it was before the search. After an N or _ search fails the last page of the inpu dt file has been input and and the pointer positioned at the start of the buffer. If lany ^Gi specifications were used, the Q-registers involved may be examined using a Qi u= command to obtain the exact character string not found. M<T {The switch / requires a valueThe switch / requires that a v alue be specified. O<[ Search string too longThe maximum length of a search string is 80 character s, including all string control commands and their arguments. P = Search string too longThe maximum length of a search string is 36 charater positions, not counting extra characters required to specify a single position. R = %Superceding existing The file is being superceded. S=8 -Missing tag !!The tag !! connot be found. The tag ! 6! must be defined at the same macro level where is is referenced. UH3 =The task is not availableThe task is not available Fat the destination node. V@KP IText only Q-register ''The Q-register '' can only be used for Qtext. This is because the Q-register is either being displayed or it is an internal ZQ-register that can only contain text. X Kx ^TAPOP. UUO for EM command failedThe TAPOP. UUO done for an EM command faile fd. The error code returned is for

. Y@L	 lTransmission error for The file  got one of the followi	 ung errors.  A transmission, device or data error because of a RUN or GETSEG.  A hardw	 }are-detected device or data error detected while reading the UFD RIB or UFD data bloc	 k.  Or a software detected inconsistency error detected while reading the UFD RIB or  file RIB. [@LW	 Text not allowedThe Q-register '' contains text, and the command does  not accept text as an argument. \0N	 Unterminated ^A commandA '^A' message type-out command has been given, but t	 $here is no corresponding '^A' to mark the end of the message.  '^A' commands must be  -complete within a single command level. ^Xp	 1Use 'EY' instead of 'Y'The 'Y' command has been replaced by 'EY', because it	 : is too easy to accidentally destroy the editing buffer by typeing 'Y'.  This applies	 B only to typed in command string, and not to macros executed by the 'M' command, on t Khe assumption that macros have been debugged. _

Y< PUnterminated file specificationThe file specification is unterminated, this is Xbecause the file specification in a Q-register did not terminate with an altmode in t ahe same Q-register. a0YY cUnterminated insert commandAn insert command (possibly an @ insert command) l has been given without terminated the text argument at the same macro level. bZ7 tUnknown keyword value for switch The keyword is not |a valid argument for the switch . The valid arguments for are . d Z{ Unknown monitor error A FILOP. UUO returned an unknown error code . This is not expected to occur. Contact your systems programmer. e~[2 Unterminated keyword in commandThe keyword in the Q-register for the command must be terminated by a space before the end of the Q-regis 'ter. g [U (Undefined network node for The network node for either does 1not exist or is currently out of contact. h~[W 5Unknown switch /The switch / is not valid on this file specif >ication. The legal switches for this command are: . The switches valid on F any file specification are . j[Y KUnterminated search commandA search command (possibly an @ search command) Shas been given without terminated the text argument at the same macro level. k\y [USETI errorAn attempt to use the USETI feature met with on of the following:
d1) EB in force.
2) ER not in force.
3)Blockcnumber wastnegative,nzero,boratolooalarge,rinlwhichacaseeaUSETI1wasdone.m@\z qUnterminatedtagAncommandestring tagehas beenmindicatedbya!command,obutthe yrevisnocorresponding !etoimarktthe endpofatheetag.r Tagsimust be complete withinladisinglecommandlevel.n] UnterminatedkeywordincommandTheekeywordargumenttforaane aO to execute an illegal UUO. Please 6contact your systems programmer and explain what you were doing. s@]7 =Unknown parameter in EV command The word is not a valid EV F parameter. The valid parameters are . t]X KValue only Q-registerThe Q-register is a value only Q-register v*kx SVideo parameter block index
out of range.The value given for the \ video parameter block index,
, was either negative or larger than the si dze of the parameter block. w ky gWrong CPU typeThe central processor that TECO was assembled for is different pthat the central processor that it is running on. y@xz uThe device for is write lockedThe file can not be writte ~n on a hardware write locked device. z { Word boundary not foundAn insufficient number of word boundaries were found
tosatisfyanFWcommand.ThepointerhasnotbeenmovedatallR|{S Attemptedwriteto,cwhichisenotopenUforhwritingThefile @fisnotopen for output, but the user attempted to write to this file. }|T !Executing current text buffer is illegalAn M or W command with the current tex )t buffer as its argument is illegal.

@
PKZ
PKZPKZPKZ@W	bKRVbNwsfbNx3&bP5&b7&`	EkM`	Ky@hlVO}	\XCh	\XH@hlVO}	\Xh	\X`H@hlVO}	\X`h	\YH@hlVO}	\Yh	\ZH@hlVO}	\Zh	\Z:H@hlVO}	\Z:h	\[H@	hlVO}	\[h	\3H@
hlVO}	\_3h	\_3H@

hlVO}	\3h	\`FH@hlVO}	\`hh	\gH@hlVO}	\gh	\g"H@hlVO}	\g"h	\g^H@hlVO}	\g^h	\gkH@hlVO}	\gkh	\kKH@hlVO}	\kKh	\kdH@hlVO}	\kdh	\kuH@hlVO}	\kuh	\l

H@hlVO}	\l

h	\lDH@hlVO}	\lDh	\lIH@"hlVO}	\lIh	\m%H@hlVO}	\m%h	\m'H@hlVO}	\m'h	\m,H@!hlVO}	\m,h	\mAH@$hlVO}	\mAh	\nH@%hlVO}	\nh	\n1H@'hlVO}	\n1h	\n8H@(hlVO}	\n8h	\n:H@*hlVO}	\n:h	\qXH@+hlVO}	\qXh	\q\H@-hlVO}	\q\h	\rH@.hlVO}	\rh	\s&H@0hlVO}	\s&h	\s1H@1hlVO}	\s1h	\sFH@3hlVO}	\sFh	\sGH@4hlVO}	\sGh	\sMH@6hlVO}	\sMh	\sYH@7hlVO}	\sYh	\s\H@9hlVO}	\s\h	\tH@:hlVO}	\th	\t=H@<hlVO}	\t=h	\tXH@=hlVO}	\tXh	\wcH@?hlVO}	\wch	\w{H@@hlVO}	\w{h	\xH@BhlVO}	\xh	\xH@ChlVO}	\xh	\xIH@EhlVO}	\xIh	\yZH@HhlVO}	\yZh	\yhH@FhlVO}	\yhh	\ynH@IhlVO}	\ynh	]
BH@KhlVO}	]
Bh	]
kH@LhlVO}	]
kh	]
lH@NhlVO}	]
lh	]
sH@OhlVO}	]
sh	]&H@QhlVO}	]&h	]bH@RhlVO}	]bh	]

H@ThlVO}	]

h	]

H@UhlVO}	]

h	]

'H@WhlVO}	]

'h	]

3H@XhlVO}	]

3h	]

[H@ZhlVO}	]

[h	]

[H@[hlVO}	]

[h	]

mH@]hlVO}	]

mh	]

uH@^hlVO}	]

uh	]

vH@`hlVO}	]

vh	]ahlVO}	]ohlVO}	]=h	]BH@phlVO}	]Bh	] KH@rhlVO}	] Kh	]#IH@shlVO}	]#Ih	]#MH@hlVO}	]#Mh	]$H@uhlVO}	]$h	]$H@vhlVO}	]$h	]$%H@xhlVO}	]$%h	]$iH@yhlVO}	]$ih	]%H@{hlVO}	]%h	]%%H@|hlVO}	]%%h	]&H@~hlVO}	]&h	]&H@hlVO}	]&h	]&)H@hlVO}	]&)h	]&[H@hlVO}	]&[h	])aH@hlVO}	])ah	])cH@hlVO}	])ch	])eH@hlVO}	])eh	])gH@hlVO}	])gh	]*H@
hlVO}	]*h	]*2H@hlVO}	]*2h	]*;H@hlVO}	]*Lh	]+@H@hlVO}	]+@h	]+AH@hlVO}	]+Ah	]+mH@hlVO}	]+mh	]+nH@hlVO}	]+nh	],H@hlVO}	],h	],;H@hlVO}	],;h	],KH@hlVO}	],Kh	],LH@hlVO}	],Lh	],OH@hlVO}	],Oh	],RH@hlVO}	],Rh	],`H@ hlVO}	],`h	],eH@"hlVO}	],eh	]-/H@#hlVO}	]-/h	]0H@%hlVO}	]0h	]03H@&hlVO}	]03h	]24H@(hlVO}	]24h	]6*H@)hlVO}	]6*h	]6cH@+hlVO}	]6ch	]6eH@,hlVO}	]6eh	]6iH@.hlVO}	]6ih	]89H@/hlVO}	]89h	]8AH@1hlVO}	]8Ah	]8|H@2hlVO}	]8|h	]8H@4hlVO}	]8h	]9#H@5hlVO}	]9#h	]>LH@7hlVO}	]>Lh	]>NH@8hlVO}	]>Nh	]C1H@:hlVO}	]C1h	]EH@;hlVO}	]Eh	]F H@=hlVO}	]F h	]IH@>hlVO}	]Ih	]IH@@hlVO}	]Ih	]JH@AhlVO}	]Jh	]JxH@ChlVO}	]Jxh	]JzH@DhlVO}	]Jzh	]KH@FhlVO}	]Kh	]KH@GhlVO}	]Kh	]K	H@IhlVO}	]K	h	]KH@JhlVO}	]Kh	]KH@LhlVO}	]Kh	]KYH@MhlVO}	]KYh	]K`H@OhlVO}	]K`h	]K~H@PhlVO}	]K~h	]LH@RhlVO}	]Lh	]LH@ShlVO}	]Lh	]O$H@UhlVO}	]O$h	]Q%H@VhlVO}	]Q%h	]QAH@XhlVO}	]QAh	]QPH@YhlVO}	]QPh	]Q|H@[hlVO}	]Q|h	]RtH@\hlVO}	]Rth	]UiH@^hlVO}	]Uih	]VH@hlVO}	]Vh	]V.H@ahlVO}	]V.h	]VhH@bhlVO}	]Vhh	]WH@dhlVO}	]Wh	]W3H@ehlVO}	]W3h	]WJH@ghlVO}	]WJh	]WLH@hhlVO}	]WLh	]WNH@jhlVO}	]WNh	]X2H@khlVO}	]X2h	]X3H@mhlVO}	]X3h	]X@H@nhlVO}	]X@h	]XBH@phlVO}	]XBh	]XEH@qhlVO}	]XEh	]XXH@shlVO}	]XXh	]XmH@thlVO}	]Xmh	]^H@vhlVO}	]^h	]^H@whlVO}	]^h	]b3H@yhlVO}	]b3h	]cbH@zhlVO}	]cbh	]dH@|hlVO}	]dh	]dYH@}hlVO}	]dYh	]k!H@hlVO}	]k!T+#Re

 "h`~H@H

 "h`~8HB@<~PHB@<~HHB@<z~8HB@<u~0H@H

 "h`~8H@H

 "h`~~xHB@<i~ HB@<g~HB@<Y~HB@<S~HB@<M~pHB@<K~hH@H

#/h~yxHB@<B~XHB@<=~PH@H

 #g	X~x8H@H

#g	X~xHB@</~@HB@<.~8HB@<~(HB@<~ H@H
Nx3&	h~uH@H

 #g	X~s`H@H

 #g	X~s8HB@<	~HB@<~H@H
KRV~rXH@H
KRV~qPH@H
KRV~pxHB@<s~xHB@<q~pHB@<]~`HB@<[~XHB@<N~HHB@<K~@HB@<8~0HB@<5~(H@H
_7&	h~iH@H

 #<A	h~h8H@H

 #<N	X~g H@H

 #<N	X~fxHB@<,~HB@<(~H@H

 "h`~epH@H

 "h`~e8HB@<~HB@<~xH@H
KRV~dH@H
KRV~cHB@<	~hHB@<~`HB@<y~PHB@<t~HH @Hb3xhH@H

 #<C	X~`8H@H

 #<C	X~`H@H

 #g	X~_0H@H

 #<C	X~_H@H

 #g	X~^hHB@<g~8HB@<c~0HB@<S~ HB@<P~HB@<4~HB@<1~HB@<~pHB@<~hHB@<~XHB@<~PH@H

 #/h~R@HB@<p~@HB@<l~8H@H

 "h`~N H@H

 "h`~MxHB@<b~(HB@<^~ HB@<L~HB@<I~H@H

 #/h~IhH@H

 #/h~I8HB@<B~xHB@<=~pH@H

 "h`~H8H@H

 "h`~GpHB@<0~`HB@<-~XH@H

;#h~F`H@H

;#h~F H@H

;#h~ExHB@<)~HHB@<%~@H@H

 "h`~E(H@H

 "h`~EHB@<~0HB@<~(HB@<~HB@<~HB@<~HB@<{~xH@H

 #<N	X~@H@H

U#<N	X~?HHB@<E~hHB@<B~`H@H

 "h`~8H@H

 "h`~6hHB@<%~8HB@<~0H@H

 "h`~4HB@<~ HB@<~HB@<~HB@<~H@H

 "h`~0xH@H

 "h`~08HB@<r~pHB@<o~hHB@<g~XHB@<c~PH@H
KRV~-(HB@<\~@HB@<X~8H@H
KRV~+pHB@<L~(HB@<G~ H@H

 "h`~*(H@H

 "h`~)0HB@<?~HB@<<~HB@<-~xHB@<&~pHB@<~`HB@<~XHB@<~~HHB@<y~@H@H

 #<N	X~ hH@H

 #<N	X~xHB@<m~0HB@<f~(H@H

 "h`~H@H

 "h`~HB@<W~HB@<O~H@H
KRV~8H@H
KRV~XH@H
KRV~@HB@<A~HB@<:~xH@H
KRV~XH@H
KRV~H@H
KRV~hHB@< ~hHB@<~`HB@<~PHB@<~HH@H

 "h`~H@H

 "h`~XHB@<~8HB@<z~0H@H

 # 3	 ~xHB@<k~ HB@<g~HB@<W~HB@<S~H@H

 "h`~H@H

 "h`~
hHB@<C~pHB@<@~hHB@<3~XHB@<0~PHB@<"~@HB@< ~8HB@<c~(HB@<_~ HB@<U~HB@<Q~H@H

 "h`~zpH@H

"h`~z0HB@<I~xHB@<E~pH@H	Ky(~HHB@<$~@H@H

 "h`~u8H@H

 "h`~tpHB@<~0HB@<~(H@H

 #/h~sxH@H

 #/h~sXHB@<~HB@<~HB@<~HB@<~xHB@<u~hHB@<p~`HB@<e~PHB@<`~HH@H

 "h`~lhH@H

 "h`~l HB@<Y~8HB@<U~0H@H

 "h`~k`H@H

 "h`~kHB@<I~ HB@<D~H@H

 "h`~i(H@H

 "h`~iHB@<>~HB@<:~H@H

 #/h~gpH@H

 #/h~gPHB@<1~pHB@<.~hH@H

 "h`~fxH@H

r"h`~fHB@<!~XHB@<~PHB@<~@HB@<~8HB@<~(HB@<~ HB@<

 "h`~[`H@H

L"h`~ZxHB@<

 "h`~YxH@H

="h`~Y0HB@<

/"h`~WpHB@<
~`H@H

"h`~R8HB@<

}~HH@H
KRV~PXH@H
KRV~PHB@<

h~8HB@<

f~0HB@<

_~ HB@<

Z~H@H
KRV~L(H@H
KRV~K`HB@<

I~HB@<

E~HB@<

~pHB@<

~hHB@<

~XHB@<

~PHB@<y~@HB@<u~8HB@<d~(HB@<_~ H@H
KRV~=H@H
KRV~<(HB@<Y~HB@<U~H@H
KRV~;@H@H
KRV~;HB@<?~xHB@<=~pHB@<-~`HB@<*~XH@H

;#h~5pH@H

;#h~5HHB@<
k~HHB@<
i~@HB@<
_~0HB@<
Y~(H@H

 "h`~-H@H

 "h`~+hHB@<
N~HB@<
H~H @HTw~<h
h
PHB@<
:~HB@<
4~@H

 "h`~'PH@H

 "h`~'HB@<
~@<
~@H

 "h`~#0HB@<
	~@<
~@H	Ky@H	Ky	u~

 "h`~H@H

"h`~@HB@<	D~

pHB@<	+~

hH@H

 "h`~ H@H

 "h`~xHB@<}~

XHB@<z~

PHB@<f~

@HB@<b~

8H@H

 #/h~

XHB@<M~

(HB@<I~

H@H	Ky@<;~

HB@<7~

H@H

 "h`~hH@H

 "h`~(HB@<0~xHB@<+~pH@H

 "h`~HH@H

 "h`~xHB@<~`HB@<~XHB@<~HHB@<	~@H@H

 "h`~XH@H

 "h`~PHB@<~0HB@<~~(HB@<x~HB@<t~H@H

 "h`~@H@H

 "h`~~pHB@<j~HB@<e~
xH@H

 "h`~}PH@H

 "h`~}HB@<`~
hHB@<]~
`H@H
KRV~|H@H
KRV~{pHB@<V~
PHB@<R~
HH@H

 #;7X~{@H@H
KRV~{H@H
KRV~zHHB@<C~
8HB@<?~
0HB@<4~
 HB@<1~
H@H
P5&X~vxHB@<~
HB@<~
H@H	Ky@H	Ky	~	pHB@<~	hHB@<s~	XHB@<n~	PHB@<G~	@HB@<>~	8HB@<6~	(HB@<2~	 H@H
KRV~gHB@<*~	HB@<'~	H@H
KRV~eXHB@<#~xHB@<~pH@H

 "h`~dHH@H

 "h`~dHB@<~`HB@<~XH@HX5!	(~c(H@HWt`~cH@HX5!	(~bXH@HWt`~b8HB@<	~HHB@<~@H@H

 "h`~a0H@H

 "h`~`hHB@<y~0HB@<t~(H@H

 #/h~_8HB@<n~HB@<j~H@H

 "h`~^H@H

 "h`~]8HB@<_~HB@<[~xH@H

 "h`~\H@H

 "h`~[@HB@<N~hHB@<J~`HB@<?~PHB@<;~HHB@<.~8HB@<*~0HB@< ~ HB@<~H@H

 "h`~T(H@H

 "h`~SHHB@<~HB@<~H@H	EkMP~RHB@<t~pHB@<n~hH@H

 "h`~N`H@H

 "h`~NHB@<e~XHB@<c~PHB@<Y~@HB@<T~8H@H

 "h`~K8H@H

 "h`~KHB@<O~(HB@<K~ HB@<?~HB@<:~H@H

 #<N	X~HpH@H

 #<N	X~GhHB@<.~xHB@<+~pH@H
^R	 ~GHB@<~`HB@<~XHB@<~HHB@<~@H@H

 "h`~AXH@H

 "h`~@XHB@<j~0HB@<e~(HB@<S~HB@<O~HB@<<~HB@<8~xHB@<(~hHB@<#~`H@H

 "h`~5@H@H

 "h`~4`HB@<~PHB@<~HH@H

 #/h~30H@H

 #/h~3HB@<	~8HB@<~0HB@<w~ HB@<s~H@H

 #<N	X~.hHB@<i~HB@<b~H@H

 "h`~-xH@H

 "h`~,HHB@<S~pHB@<O~hH@H

 "h`~*PH@H

"h`~*HB@<A~XHB@<=~PH@H	Ky

 #<N	X~&@HB@<)~(HB@<$~ H@H

 #<N	X~%HB@<~HB@<~H@H

 #<N	X~#HB@<~xHB@<~~pHB@<s~`HB@<o~XH@H

 "h`~PH@H

 "h`~(HB@<h~HHB@<d~@H@H

 "h`~ HB@<Q~0HB@<N~(HB@<E~HB@<B~HB@<7~HB@<3~xH@H

 "h`~H@H

 "h`~hHB@<~hHB@<~`H@H

 #/h~H@H

 #/h~PHB@<~PHB@<~HH@H

 "h`~PH@H

 "h`~(HB@<}~8HB@<z~0H@H

 "h`~pH@H

 "h`~HHB@<m~ HB@<j~HB@<c~HB@<_~H @Hb3xhiH@H

 #g	X~

PH@H

 #<N	X~

 HB@<U~pHB@<Q~hH@H

 #g	X~`H@H

 #<N	X~
pH@H

 #<N	X~
HHB@<I~XHB@<F~PH@H

 "h`~	0H@H

"h`~	HB@<2~@HB@<.~8H@H

 #<N	X~HH@H

 #<N	X~HB@<~(HB@<~ H@H
Nx3&	h~PH@H

 #<N	X~@H@H

 #<N	X~HB@<~HB@<~(