Trailing-Edge
-
PDP-10 Archives
-
tops10_703a_sys_ap115_bb-ju01b-bb
-
once.x14
There are 3 other files named once.x14 in the archive. Click here to see a list.
TITLE ONCE - ONCE ONLY OPERATOR DIALOGUE AND I/O DEVICE INITIALIZATION V100
SUBTTL T. HASTINGS/CHW/RCC/AF/DAL 24 JUN 86
SEARCH F,S,BTSPRM
$RELOC
$LOW
.DIRECTIVE FLBLST ;CLEANER LISTINGS
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
.CPYRT<1973,1986>
;COPYRIGHT (C) 1973,1974,1975,1976,1977,1978,1979,1980,1982,1984,1986
;BY DIGITAL EQUIPMENT CORP., MAYNARD, MASS.
;ALL RIGHTS RESERVED.
XP VONCE,100
;PUT VERSION NUMBER IN GLOB LISTING AND LOADER STORAGE MAP
;"ONCE" SHOULD BE THE LAST LOADED PROGRAM (AFTER SYSMAK AND DDT)
; THUS IF IT OVERFLOWS INTO THE USER AREA NO HARM IS DONE.
;HOWEVER, SINCE THE DISK REFRESHING ROUTINES HAVE NOW
; BEEN MADE INTO SEPARATE SUBPROGRAMS FOR LEVEL C
; (FHDREF, MDFREF, DPDREF, ETC.), THEY MAY BE LOADED FOLLOWING ONCE.
;HOWEVER, HOWEVER, UNDER LEVEL D, "ONCE" MUST BE LOADED AFTER
; REFSTR AND ONCMOD SINCE ONCEND IS USED AS THE STARTING ADDRESS OF
; FREE CORE USED BY DATA STUCTURES CREATED DURING ONCE TIME.
;ONCE ONLY CODE IS DIVIDED INTO 3 PARTS
; 1. MANDATORY ONCE ONLY (LINKSR) - NO CTY NEEDED
; (GOOD FOR REPEATED STARTUPS DURING DEBUGGING)
; 2. USUAL SHORT ONCE ONLY CODE (ONCE) - CTY FOR DATE AND TIME
; 3. OPTIONAL ONCE ONLY CODE - CTY DIALOG TO CHANGE MONITOR
; OR REFRESH DISK(S) - (ALT-MODE INSTEAD OF CR AFTER TIME)
DEFINE SETTYO <PUSHJ P,OTSET>
DEFINE TYPE <PUSHJ P,COMTYO##>
DEFINE NEXTC <PUSHJ P,COMTYI##>
;INITIALIZE PRIORITY CHANNELS AND SETUP INTERRUPT SERVICE ROUTINE CHAIN
;LINK TO SERVICE ROUTINES
LINKSR::0 ;CALLED WITH JSR FROM SYSINI
SKIPN JRSTI1 ;BEEN THROUGH JRSTI1 ALREADY?
JSR JRSTI1 ;SETUP LOCS 40 THRU 61 & TEST FOR 2 RELOC HARDWARE
MOVE P,.CPNPD##
;INITIALIZE DISK(S)
PUSHJ P,FILMAN## ;INITIALIZE ALL DISK(S)
; BEFORE OVERWRITING ONCE WITH DDB'S
MOVE T1,JRSTI
MOVEM T1,LINKSR+1 ;DO ONCE ONLY
SKIPN DEVLST## ;HAVE DEVICE DATA BLOCKS BEEN LINKED ?
JRST LINKDB## ;NO, GO LINK DATA BLOCKS
;RETURN @LINKSR
;MULTIPLE DEVICE DATA BLOCKS ARE CREATED
;AS SPECIFIED BY SYSSIZ AND MAY ERASE PART
;OF ONCE ONLY CODE
JRSTI: JRST @LINKSR ;YES, RETURN
;CODE TO SET MONITOR FOR DEBUGGING SESSION WITH EXEC DDT
;MAKE STARTUP BE FAST
;SYSTEM PROGRAMMER TYPES DEBUG$G TO START MONITOR
;ALLOW SAME COPY OF MONITOR TO BE USED FOR REGULAR SYSTEM
;SIMPLY BY NOT STARTING AT DEBUG.
DEBUG:: MOVEI T1,DDTEND## ;END OF DDT
HRRM T1,PATSIZ ;INCLUDE DDT IN SYSTEM SIZE
IFN FTLOCK,<
MOVEI T1,0 ;NO LIMIT TO AMOUNT OF LOCKED CORE
HRRM T1,LOKLIM## ;
>
SETOM ERROK## ;SHUT UP ONCMOD
; PATCH DDTCPU WITH A JFCL TO BYPASS SMP DEBUGGING FEATURES
IFN FTMP,<
DDTCPN: APRID T1 ;READ CPU SERIAL NUMBER, ETC.
ANDI T1,ID.PSN ;MASK DOWN TO JUST SERIAL NUMBER
MOVEI T2,.C0CDB## ;START OF CPU DATA BLOCK CHAIN
DDTCP1: CAMN T1,.CPASN##-.CPCDB##(T2) ;FOUND OURS?
JRST DDTCP2 ;YES
HLRZ T2,.CPCDB##-.CPCDB##(T2) ;LINK TO NEXT CDB
JUMPN T2,DDTCP1 ;LOOP BACK
MOVEI T2,.C0CDB## ;NO CDB FOR OUR CPU SO USE THE FIRST ONE
DDTCP2: MOVE T1,.CPASN##-.CPCDB##(T2) ;GET CPU NUMBER
DDTCPU: MOVEM T1,DEBCPU## ;SAVE FOR DEBUGGING SMP
> ;END IFN FTMP
;PATCH DDTOPR - SIXBIT OPR FOR DEBUGGING
SKIPA T1,.+1 ;OPR
DDTOPR: SIXBIT /CTY/ ;ASSUME CTY - PATCH TO OTHER
MOVEM T1,DEVOPR## ;OPR SIXBIT NAME
MOVSI T1,(DF.SBD+DF.NAR) ;
IORM T1,DEBUGF## ;FLAG DEBUGGING MODE
; SO WHY RELOAD, LONG DIALOG
; UNITS OFF-LINE NOT ASKED
;ALSO, CHANGES .SET CORMIN TO JUMP TO EDDT.
; RETURN IS BY GOBACK$G
;ALSO, NOTICES 21 NON-ZERO (OR S.S.6 ON KI-10)
; RETURN IS BY GOBACK$G
MOVEI T1,ST.NRT ;TURN OFF REMOTE
IORM T1,STATES## ;TTY'S
JRST SYSINI## ;START UP SYSTEM
SUBTTL ONCE-ONLY/BOOTSTRAP INTERFACE -- ACCOUNT FOR CORE USAGE
; SUBROUTINE TO FIXUP SYSORG TO ACCOUNT FOR THE PRESENCE OF THE YET
; TO BE MAPPED BOOTSTRAP. THIS MUST BE DONE IMMEDIATELY AFTER SETTING
; UP NXMTAB AND BEFORE ANY SECTION MAPS ARE ALLOCATED. OTHERWISE,
; PORTIONS OF THE BOOTSTRAP MAY BE TAKEN FOR A SECTION MAP.
BOOTSZ: SKIPN P1,BOOTPA## ;PHYSICAL ADDRESS OF BOOT ORIGIN
JRST BOOTZA ;NOT THERE--GO ZERO ADDRESSES
MOVE U,P1 ;COPY IT
HRRI U,.BTNAM(P1) ;POINT TO IDENTIFIER
PUSHJ P,REFMEM## ;FETCH
CAME T1,['BOOT '] ;SANITY CHECK
JRST BOOTZA ;DON'T KNOW HOW WE WERE BOOTED
HRRI U,.BTSIZ(P1) ;OFFSET TO SIZE WORD
PUSHJ P,REFMEM## ;FETCH
JUMPGE T1,BOOTZA ;MUST BE NEGATIVE
HLRE T2,T1 ;GET -PAGE COUNT
MOVNS T2 ;MAKE POSITIVE
HRRZ T3,T1 ;ISOLATE LENGTH IN WORDS
ADDI T3,PAGSIZ## ;ROUND UP A PAGE
LSH T3,W2PLSH## ;CONVERT TO A PAGE NUMBER
CAME T3,T2 ;MUST MATCH
JRST BOOTZA ;NOT GOOD
HLRES T1 ;GET -LENGTH IN PAGES
LSH T1,P2WLSH## ;CONVERT TO -WORD COUNT
MOVEM P1,SYSORG## ;START ALLOCATING AT BOTTOM OF BOOTSTRAP
SUB P1,T1 ;DETERMINE END OF BOOTSTRAP
MOVEM P1,BTSPFF ;SAVE FOR KLUDGERY AT BOOTMP
POPJ P, ;RETURN
BOOTZA: SETZM BOOTPA## ;CLEAR PHYSICAL ADDRESS
SETZM BOOTVA## ;CLEAR VIRTUAL ADDRESS
POPJ P, ;RETURN
BTSPFF: 0 ;FIRST PHYSICAL ADDRESS FOLLOWING BOOTSTRAP
; USED TO FAKE OUT ONCMAP TO ALLOCATE THE
; PHYSICAL PAGES CONTAINING THE BOOTSTRAP
SUBTTL ONCE-ONLY/BOOTSTRAP INTERFACE -- MAP BOOTSTRAP
BOOTMP: SKIPN P1,BOOTPA## ;PHYSICAL ADDRESS OF BOOT ORIGIN
POPJ P, ;NOT THERE
MOVE U,P1 ;COPY ADDRESS
HRRI U,.BTSIZ(P1) ;OFFSET TO SIZE WORD
PUSHJ P,REFMEM## ;FETCH
HLLZ P2,T1 ;PRESERVE -LENGTH IN PAGES
IFN FTXMON,<
MOVSI T1,(MS.RLC) ;SECTION NUMBER FOR RELOCATABLE CODE
PUSHJ P,ALCSMP ;ALLOCATE A MAP IF NECESSARY
> ;END IFN FTXMON
MOVE T1,.CPEPT## ;POINT TO THIS CPU'S MAP
ADDI T1,SECTAB+(MS.RLC) ;OFFSET INTO THE SECTION MAP TABLE
MOVE T2,(T1) ;GET MAP POINTER
MOVE T1,.CPMAP## ;GET ADDRESS OF SECTION ZERO MAP
MOVEM T2,.EUPMP/PAGSIZ##(T1) ;MAKE THE MAP ADDRESSABLE
IFE FTXMON,<
HRRZ T2,MONVFF## ;GET FIRST FREE ABOVE HIGH SEGMENT
LSH T2,W2PLSH## ;CONVERT TO A PAGE NUMBER
HRRI T1,.EUPMP+1(T2) ;START HERE
ADDI T2,-PAGSIZ## ;GET -REMANING PAGE COUNT IN T2
HRL T1,T2 ;MAKE AN AOBJN POINTER
> ;END IFE FTXMON
IFN FTXMON,<
MOVSI T1,-PAGSIZ## ;PAGES PER SECTION
HRRI T1,.EUPMP ;START OF SECTION MAP
> ;END IFN FTXMON
HRR P2,T1 ;PRESERVE SECTION MAP ADDRESS
BOOTM1: HLL T2,P2 ;GET -PAGE COUNT
BOOTM2: SKIPE (T1) ;PAGE IN USE?
JRST BOOTM1 ;YES--TRY ANOTHER
AOBJP T1,BOOTZA ;GIVE UP IF SECTION IS FULL
AOBJN T2,BOOTM2 ;LOOP FOR THE REQUIRED NUMBER OF PAGES
ANDI T1,PG.BDY## ;KEEP ONLY ENDING PAGE NUMBER
HLRE T2,P2 ;GET -LENGTH IN PAGES
ADDI T2,(T1) ;COMPUTE STARTING VIRTUAL PAGE NUMBER
LSH T2,P2WLSH ;CONVERT TO AN ADDRESS
HRLI T2,(MS.RLC) ;INCLUDE SECTION NUMBER FOR RELOCATABLE CODE
MOVEM T2,BOOTVA## ;SAVE ADDRESS
HLRE T1,P2 ;-PAGES NEEDED
MOVNS T1 ;MAKE POSITIVE
LSH T1,P2WLSH ;CONVERT TO A WORD COUNT
MOVSI T2,(<PM.DCD>B2+PM.WRT+PM.PUB+PM.KPM+PM.SWB) ;DIRECT POINTER + WRITABLE
PUSH P,SYSORG## ;SAVE SYSORG
PUSH P,MONVFF## ;WILL BE CHANGED BY ONCMAP
MOVE T3,BTSPFF ;FIRST PHYSICAL ADDRESS FOLLOWING BOOTSTRAP
MOVEM T3,SYSORG## ;RESET SYSORG SO WE MARK THOSE PAGES AS TAKEN
PUSHJ P,ONCMAP## ;MAP THE PAGES
POP P,MONVFF## ;RESTORE FIRST FREE
POP P,SYSORG## ;RESTORE SYSORG
MOVE T1,P1 ;GET STARTING PHYSICAL ADDRESS
LSH T1,W2PLSH## ;CONVERT TO A PAGE NUMBER
HRLI T1,(<PM.DCD>B2+PM.WRT+PM.PUB+PM.SWB) ;DIRECT POINTER + WRITABLE
BOOTM3: MOVEM T1,(P2) ;STORE IN SECTION MAP
AOS T1 ;ADVANCE TO NEXT PAGE
AOBJN P2,BOOTM3 ;LOOP
CLRPGT (0,.EUPMP) ;UPDATE CHANGES IN PAGER
IFE FTXMON,<
MOVE T1,BOOTVA## ;VIRTUAL ADDRESS OF BOOT
HLRE T1,.BTSIZ(T1) ;- LENGTH IN PAGES OF BOOT
MOVMS T1 ;LENGTH IN PAGES
LSH T1,P2WLSH## ;LENGTH IN WORDS
ADDM T1,MONVFF## ;UPDATE TO REFLECT PAGES ALLOCATED FOR BOOT
>
POPJ P, ;DONE
SUBTTL ONCE-ONLY/BOOTSTRAP INTERFACE -- COPY MONITOR FILESPEC
BOOTFX: SKIPN W,BOOTPA## ;PHYSICAL ADDRESS OF BOOT ORIGIN
POPJ P, ;NOT THERE
MOVE U,W ;COPY IT
HRRI U,.BTSIZ(W) ;POINT TO SIZE WORD
PUSHJ P,REFMEM## ;FETCH
HRRI U,.BTDEV(W) ;POINT TO START OF FILESPEC
MOVSI T2,-BOOTLN ;-LENGTH OF TRANSLATION TABLE
BOOTF1: HLRZ U,BOOTBL(T2) ;GET AN OFFSET
ADD U,W ;INDEX INTO BOOT VECTOR
PUSHJ P,REFMEM## ;FETCH WORD
HRRZ T3,BOOTBL(T2) ;GET STORAGE LOCATION
MOVEM T1,@T3 ;SAVE WORD
AOBJN T2,BOOTF1 ;LOOP
POPJ P, ;DONE
BOOTBL: .BTDEV,,DEVICE ;DEVICE
.BTFIL,,FNAME ;FILE NAME
.BTEXT,,FEXT ;EXTENSION
.BTPTH+0,,PPN ;PPN
.BTPTH+1,,SFDLST+0 ;SFD #1
.BTPTH+2,,SFDLST+1 ;SFD #2
.BTPTH+3,,SFDLST+2 ;SFD #3
.BTPTH+4,,SFDLST+3 ;SFD #4
.BTPTH+5,,SFDLST+4 ;SFD #5
BOOTLN==.-BOOTBL ;LENGTH OF TABLE
SUBTTL ONCE-ONLY/BOOTSTRAP INTERFACE -- BUILD BOOTXT
BSTRNG: JUMPE W,CPOPJ ;RETURN IF COULDN'T FIND BOOTS
MOVEI T1,BOOTYO ;ROUTINE TO BUILD UP STRING
MOVEM T1,.CPTOA## ; SAVE AS TTY OUTPUT ROUTINE
MOVE T1,[POINT 7,BOOTXT##] ;BYTE POINTER
MOVEM T1,BOOTBP ;STORE THE POINTER
MOVEI T1,[ASCIZ ./D .];FIRST DO A DUMP
PUSHJ P,CONMES## ; ..
SKIPN T2,DEVICE ;A DEVICE SPECIFIED?
POPJ P, ;NO, LEAVE DEFAULT ALONE
MOVEM T2,STRMON##
PUSHJ P,PRNAME## ;YES--PUT IN COMMAND STRING
MOVEI T1,[ASCIZ /:/] ;DELIMIT WITH A COLON
PUSHJ P,CONMES## ; ..
SKIPN T2,FNAME ;FILE NAME?
JRST BSTRN2 ;NO
MOVEM T2,FILMON##
PUSHJ P,PRNAME## ;PUT IN NAME
HLLZ T2,FEXT ;PICK UP EXTENSION
JUMPE T2,BSTRN2 ;NONE--LOOK FOR PPN
MOVEM T2,EXTMON##
LSH T2,-6 ;PUT IN A DOT
TLO T2,(16B5) ; ..
PUSHJ P,PRNAME## ;TOSS IN EXT
BSTRN2: SKIPN T2,PPN ;A PPN?
JRST BSTRN5 ;NO
MOVEM T2,PPNMON##
PUSHJ P,PRLBK## ;FIRST A BRACKET
HLRZ T1,PPN ;GET PROJECT
PUSHJ P,PRTDI8## ;PRINT IN OCTAL
PUSHJ P,PRCOM## ;ADD A COMMA
HRRZ T1,PPN ;GET PROG NUMBER
PUSHJ P,PRTDI8## ;PRINT PROG
PUSH P,P1 ;SAVE P1
MOVSI P1,-5 ;SETUP AOBJN POINTER TO SFDLST
BSTRN3: SKIPN T2,SFDLST(P1) ;NEXT SFD SPECIFIED?
JRST BSTRN4 ;NO
PUSHJ P,PRCOM## ;PRINT COMMA
PUSHJ P,PRNAME## ;PRINT SFD NAME
AOBJN P1,BSTRN3 ;LOOP FOR ALL
BSTRN4: POP P,P1 ;RESTORE P1
PUSHJ P,PRRBK## ;ADD IN RIGHT SQUARE BRACKET
MOVE T1,[SFDLST,,SFDMON##] ;COPY SFD LIST TO
BLT T1,SFDMON##+4 ;WHERE MONITOR WANTS IT
BSTRN5: MOVEI T3,15
IDPB T3,BOOTBP
MOVEI T3,0
IDPB T3,BOOTBP
POPJ P,0
BOOTYO: IDPB T3,BOOTBP ;STORE BYTE IN STRING
POPJ P,0 ;RETURN
BOOTBP: POINT 7,BOOTXT## ;RELOAD STRING POINTER
SUBTTL ONCE-ONLY/BOOTSTRAP INTERFACE -- BUILD THE SSL
BLDSSL::SE1ENT ;ENTER SECTION ONE
MOVEI T1,.BTSSL ;OFFSET
SKIPE PRESSL ;USING THE PRESERVED SSL?
PUSHJ P,BTDATA## ;BOOTSTRAP AVAILABLE?
POPJ P, ;NO
MOVEI T3,[ASCIZ/system search list/]
PUSHJ P,SETENT ;SET POINTERS
BLDSS1: PUSHJ P,NXTENT ;GET NEXT ENTRY
JRST BLDSS2 ;NO MORE DATA--ALL STRUCTURES VALID
PUSHJ P,FNSTR## ;DOES THIS STRUCTURE EXIST?
PUSHJ P,BADSTR ;NO--COMPLAIN TO OPERATOR
JRST BLDSS1 ;GO CHECK OUT THE NEXT STRUCTURE
BLDSS2: PUSHJ P,RSTENT ;RESET POINTERS
SKIPN PRECNT ;ANY ENTRIES FOUND?
AOS PREERR ;NO--CALL THIS AN ERROR
SKIPN PREERR ;ANY ERRORS?
JRST BLDSS3 ;NO
PUSHJ P,BLDDSK ;TELL OPERATOR WE WILL USE DISK DATA BASE
POPJ P, ;GIVE UP
BLDSS3: HLRZ T1,SYSSTR## ;POINT TO START OF STR DB CHAIN
BLDSS4: SETOM STRSRC##(T1) ;EMPTY THE SSL
HLRZ T1,STRSYS##(T1) ;GET NEXT STR DB
JUMPN T1,BLDSS4 ;LOOP
BLDSS5: PUSHJ P,NXTENT ;GET NEXT ENTRY
JRST CPOPJ1 ;RETURN
PUSHJ P,FNSTR## ;FIND THE STR DB
JRST BLDSS5 ;CAN'T HAPPEN
HRRZ T2,BLDPTR ;GET RELATIVE OFFSET IN TABLE
MOVEM T2,STRSRC##(P2) ;MAKE THAT THE POSITION IN THE SSL
JRST BLDSS5 ;LOOP FOR THE NEXT STRUCTURE
BLDASL::SE1ENT ;ENTER SECTION ONE
MOVEI T1,.BTASL ;OFFSET
SKIPE PREASL ;USING THE PRESERVED ASL?
PUSHJ P,BTDATA## ;BOOTSTRAP AVAILABLE?
POPJ P, ;NO
MOVEI T3,[ASCIZ/active swapping list/]
PUSHJ P,SETENT ;SET POINTERS
BLDAS1: PUSHJ P,NXTENT ;GET NEXT ENTRY
JRST BLDAS2 ;NO MORE DATA--ALL UNITS VALID
MOVE T2,T1 ;PUT NAME IN PROPER PLACE
PUSHJ P,FNDUNI## ;DOES THIS UNIT EXIST?
JRST [PUSHJ P,BADUNI ;NO--COMPLAIN TO OPERATOR
JRST BLDAS1] ;GO CHECK OUT THE NEXT UNIT
LDB T1,UNYK4S## ;GET SWAPPING SPACE ALLOCATED ON UNIT
SKIPG T1 ;HAVE ANY?
PUSHJ P,BLDSWP ;NO--COMPLAIN TO OPERATOR
JRST BLDAS1 ;GO CHECK OUT THE NEXT UNIT
BLDAS2: PUSHJ P,RSTENT ;RESET POINTERS
SKIPN PRECNT ;ANY ENTRIES FOUND?
AOS PREERR ;NO--CALL THIS AN ERROR
SKIPN PREERR ;ANY ERRORS?
JRST BLDAS3 ;NO
PUSHJ P,BLDDSK ;TELL OPERATOR WE WILL USE DISK DATA BASE
POPJ P, ;GIVE UP
BLDAS3: HLRZ T1,SYSUNI## ;POINT TO START OF UDB CHAIN
BLDAS4: SETOM UNISUN##(T1) ;EMPTY THE ASL
HLRZ T1,UNISYS##(T1) ;GET NEXT UDB
JUMPN T1,BLDAS4 ;LOOP
BLDAS5: PUSHJ P,NXTENT ;GET NEXT ENTRY
JRST CPOPJ1 ;DONE
MOVE T2,T1 ;PUT NAME IN PROPER PLACE
PUSHJ P,FNDUNI## ;FIND THE UDB
JRST BLDAS5 ;CAN'T HAPPEN
HRRZ T2,BLDPTR ;GET RELATIVE OFFSET IN TABLE
MOVEM T2,UNISUN##(U) ;MAKE THAT THE POSITION IN THE ASL
JRST BLDAS5 ;LOOP FOR THE NEXT UNIT
BLDSDL::SE1ENT ;ENTER SECTION ONE
MOVEI T1,.BTSDL ;OFFSET
SKIPE PRESDL ;USING THE PRESERVED SDL?
PUSHJ P,BTDATA## ;BOOTSTRAP AVAILABLE?
POPJ P, ;NO
MOVEI T3,[ASCIZ/system dump list/]
PUSHJ P,SETENT ;SET POINTERS
BLDSD1: PUSHJ P,NXTENT ;GET NEXT ENTRY
JRST BLDSD2 ;NO MORE DATA--ALL STRUCTURES VALID
PUSHJ P,FNSTR## ;DOES THIS STRUCTURE EXIST?
PUSHJ P,BADSTR ;NO--COMPLAIN TO OPERATOR
JRST BLDSD1 ;GO CHECK OUT THE NEXT STRUCTURE
BLDSD2: PUSHJ P,RSTENT ;RESET POINTERS
SKIPN PRECNT ;ANY ENTRIES FOUND?
AOS PREERR ;NO--CALL THIS AN ERROR
SKIPN PREERR ;ANY ERRORS?
JRST BLDSD3 ;NO
PUSHJ P,BLDDSK ;TELL OPERATOR WE WILL USE DISK DATA BASE
POPJ P, ;GIVE UP
BLDSD3: HLRZ T1,SYSSTR## ;POINT TO START OF STR DB CHAIN
BLDSD4: SETOM STRSDL##(T1) ;EMPTY THE SDL
HLRZ T1,STRSYS##(T1) ;GET NEXT STR DB
JUMPN T1,BLDSD4 ;LOOP
BLDSD5: PUSHJ P,NXTENT ;GET NEXT ENTRY
JRST CPOPJ1 ;DONE
PUSHJ P,FNSTR## ;FIND THE STR DB
JRST BLDSD5 ;CAN'T HAPPEN
HRRZ T2,BLDPTR ;GET RELATIVE OFFSET IN TABLE
MOVEM T2,STRSDL##(P2) ;MAKE THAT THE POSITION IN THE SDL
JRST BLDSD5 ;LOOP FOR THE NEXT STRUCTURE
SUBTTL ONCE-ONLY/BOOTSTRAP INTERFACE -- MISCELLANEOUS ROUTINES
; SET UP TO ACCESS BOOTSTRAP VECTOR ENTRIES
; CALL: MOVE T1, LENGTH OF TABLE
; MOVE T2, TABLE ADDRESS
; MOVE T3, IDENTIFYING TEXT (OR -1 IF NOT TO STORE ANY)
; PUSHJ P,SETENT
; <RETURN>
SETENT: ADJSP T1,-1 ;PREDECREMENT POINTER
SUBI T2,1 ;PREDECREMENT ADDRESS
MOVEM T1,BLDPTR ;SAVE POINTER
MOVEM T1,SAVPTR ;MAKE A COPY
MOVEM T2,BLDTBL ;SAVE ADDRESS
MOVEM T2,SAVTBL ;MAKE A COPY
SKIPL T3 ;STORE BUILD TEXT?
MOVEM T3,BLDTXT ;YES
SETZM PRECNT ;CLEAR COUNT OF ENTRIES FOUND
SETZM PREERR ;CLEAR ERROR FLAG
POPJ P, ;RETURN
; RESET THE VECTOR ENTRY POINTERS
; CALL: PUSHJ P,RSTENT
; <RETURN>
RSTENT: MOVE T1,SAVPTR ;GET SAVED POINTER
MOVEM T1,BLDPTR ;RESET IT
MOVE T1,SAVTBL ;GET SAVED ADDRESS
MOVEM T1,BLDTBL ;RESER IT
POPJ P, ;RETURN
; RETRIEVE THE NEXT ENTRY
; CALL: PUSHJ P,NXTENT
; <NON-SKIP> ;RAN OUT OF DATA
; <SKIP> ;T1 CONTAINS THE ENTRY
NXTENT: MOVE T1,BLDPTR ;GET AOBJN POINTER
AOBJP T1,CPOPJ ;RETURN IF DONE
MOVEM T1,BLDPTR ;UPDATE
AOS BLDTBL ;ADVANCE POINTER
SKIPN T1,@BLDTBL ;GET NEXT ENTRY
JRST NXTENT ;EMPTY SLOT--TRY AGAIN
AOS PRECNT ;COUNT THE ENTRY
JRST CPOPJ1 ;RETURN
; TELL THE OPERATOR THE PRESERVED DATA CANNOT BE USED
; CALL: PUSHJ P,BLDDSK
; <RETURN>
BLDDSK: SKIPN FSTTIM ;ONLY OUTPUT THE MESSAGE ONCE
POPJ P,
MOVEI T1,[ASCIZ /[Rebuilding the /]
PUSHJ P,ICONM ;TYPE TEXT
MOVE T1,BLDTXT ;GET TEXT
PUSHJ P,CONMES## ;TYPE IT
MOVEI T1,[ASCIZ/ from the HOMe blocks]
/]
PUSHJ P,CONMES## ;TYPE TEXT
PJRST CRLFOP## ;APPEND A CRLF AND RETURN
; TELL THE OPERATOR THAT A STRUCTURE OR LOGICAL UNIT IS MISSING
; CALL: MOVE T1, SIXBIT NAME
; PUSHJ P,BADSTR/BADUNI
; <RETURN>
BADSTR: SKIPA T2,[[ASCIZ/%Structure /]]
BADUNI: MOVEI T2,[ASCIZ/%Logical unit /]
AOS PREERR ;FLAG THE ERROR
PUSH P,T1 ;SAVE STRUCTURE OR LOGICAL UNIT NAME
MOVE T1,T2 ;POINT TO TEXT
PUSHJ P,ICONM ;TYPE IT
POP P,T2 ;GET STRUCTURE NAME BACK
PUSHJ P,PRNAME## ;TYPE IT
MOVEI T1,[ASCIZ/ missing from the /]
PUSHJ P,CONMES## ;TYPE TEXT
MOVE T1,BLDTXT ;GET IDENTIFIER
PUSHJ P,CONMES## ;TYPE IT
PJRST CRLFOP## ;APPEND A CRLF AND OUTPUT
; TELL THE OPERATOR A UNIT HAS NO SWAPPING SPACE ALLOCATED
; CALL: MOVE U, UDB ADDRESS
; PUSHJ P,BLDSWP
; <RETURN>
BLDSWP: AOS PREERR ;FLAG THE ERROR
MOVEI T1,[ASCIZ/%No swapping space allocated on /]
PUSHJ P,ICONM ;TYPE TEXT
MOVE T2,UNINAM##(U) ;GET PHYSICAL UNIT NAME
PUSHJ P,PRNAME## ;TYPE IT
SKIPN UNIHID##(U) ;HAVE A UNIT-ID?
PJRST CRLFOP## ;NO--APPEND A CRLF AND OUTPUT
MOVEI T1,[ASCIZ/ (/] ;SEPARATE FROM
PUSHJ P,CONMES## ; PHYSICAL NAME
MOVE T2,UNIHID##(U) ;GET LOGICAL UNIT NAME
PUSHJ P,PRNAME## ;TYPE IT
MOVEI T1,[ASCIZ /)/] ;TERMINATE
PUSHJ P,CONMES## ;TYPE TEXT
PJRST CRLFOP## ;APPEND A CRLF AND OUTPUT
SUBTTL ONCE-ONLY HIDDEN SYMBOL TABLE SETUP
SYTBFX: SKIPGE P1,.JBSYM## ;GET POINTER TO SYMBOL TABLE
JRST SYTBF1 ;A NON-EXTENDED SYMBOL TABLE
SKIPN U,P1 ;COPY ADDRESS TO U, SKIP IF LOADED WITH SYMBOLS
POPJ P, ;NO SYMBOLS, NOT MUCH WE CAN DO
HRRI U,.SYSTB+.SYTYP(P1) ;GET FLAGS,,LENGTH OF DEFINED SYMBOL TABLE
PUSHJ P,REFMEM## ;FETCH THE CONTENTS
AND T1,[SY.LEN] ;KEEP JUST THE LENGTH
PUSH P,T1 ;SAVE LENGTH
MOVNS T1 ;GET -VE LENGTH OF SYMBOL TABLE
MOVSM T1,SYMPTR ;SAVE (NOTE ASSUMPTION ON .LT. 256K OF SYMBOLS)
HRRI U,.SYSTB+.SYADR(P1) ;GET ADDRESS OF DEFINED SYMBOL TABLE
PUSHJ P,REFMEM## ;FETCH THE CONTENTS
HRRM T1,SYMPTR ;SAVE IN-SECTION ADDRESS
HRRI U,.SYSTB+.SYSTL+.SYTYP(P1) ;GET FLAGS,,LENGTH OF UNDEFINED S.T.
PUSHJ P,REFMEM## ;FETCH THE CONTENTS
AND T1,[SY.LEN] ;KEEP JUST THE LENGTH
ADDM T1,(P) ;TOTAL LENGTH OF SYMBOL TABLE
MOVNS T1 ;GET -VE LENGTH OF UNDEFINED SYMBOL TABLE
MOVSM T1,USYPTR ;SAVE
HRRI U,.SYSTB+.SYSTL+.SYADR(P1) ;GET ADDRESS OF UNDEFINED S.T.
PUSHJ P,REFMEM## ;FETCH THE CONTENTS
HRRM T1,USYPTR ;SAVE IN-SECTION ADDRESS
MOVE T2,T1 ;COPY TO T2
LSH T2,W2PLSH## ;CONVERT TO STARTING PAGE NUMBER
ADD T1,(P) ;ADD IN LENGTH OF SYMBOL TABLE
ADDI T1,PG.BDY## ;ROUND UP TO END OF PAGE
LSH T1,W2PLSH## ;CONVERT TO ENDING PAGE NUMBER +1
SUB T1,T2 ;NUMBER OF PAGES IN SYMBOL TABLE
PUSHJ P,MOVSTB ;MOVE THE SYMBOL TABLE
ADJSP P,-1 ;CLEAN UP THE STACK
DMOVE T2,SYMPTR ;GET BACK PSEUDO .JBSYM/.JBUSY
TRZ T2,-1-PG.BDY## ;KEEP JUST IN-PAGE PORTION
TRO T2,MONORG ;RELOCATED .JBSYM
TRZ T3,-1-PG.BDY## ;KEEP JUST IN-PAGE PORTION
TRO T3,MONORG ;RELOCATED .JBUSY
MOVEM T2,.CPEDV##+.EDSYM ;STORE THE POINTERS
MOVEM T3,.CPEDV##+.EDUSY
MAP T1,.CPEDV## ;GET PHYSICAL EDV ADDRESS
TLZ T1,-1-MXSECN ;KEEP JUST ADDRESS
MOVEM T1,.JBEDV## ;INFORM DDT OF HIDDEN SYMBOL TABLE
PJRST SYTBBD ; AND ZAP OLD-STYLE POINTERS
;HERE FOR NON-EXTENDED SYMBOL TABLE (KS)
SYTBF1: HLRE T1,.JBSYM## ;GET LENGTH OF SYMBOL TABLE
MOVMS T1 ;GET REAL LENGTH
HRRZ T2,.JBSYM## ;ADDRESS OF SYMBOL TABLE
ADDI T1,(T2) ;FIRST ADDRESS OUTSIDE OF THE SYMBOL TABLE
SKIPN T2,.JBUSY## ;IN CASE ANY UNDEF'S STILL LYING AROUND
HRRZ T2,.JBSYM## ;NONE, GET SYMBOL TABLE AGAIN
ANDI T2,-1-PG.BDY## ;MOVING WHOLE PAGES, ADJUST
SUBI T1,(T2) ;NOW KNOW NUMBER OF WORDS TO MOVE
ADDI T1,PG.BDY## ;BUT STILL HAVE TO ROUND IT UP
LSH T1,W2PLSH## ;NOW HAVE THE NUMBER OF PAGES
CAILE T1,SYMSIZ## ;ENOUGH SPACE (SYMBK1 IN COMMON.MAC)
MOVEI T1,SYMSIZ## ;NO, REDUCE TO MAXIMUM
LSH T2,W2PLSH## ;STARTING PAGE NUMBER
PUSHJ P,MOVSTB ;MOVE THE SYMBOL TABLE
MOVE T2,.JBSYM## ;GET .JBSYM
MOVE T3,.JBUSY## ;GET .JBUSY
PJRST FILEDX ;FILL IN EDV AND RETURN
;FINISH SYMBOL TABLE SETUP BY FILLING IN THE EXEC DATA VECTOR.
FILEDV: DMOVE T2,SYMPTR ;FETCH THE VALUES
FILEDX: TRZ T2,-1-PG.BDY## ;KEEP JUST IN-PAGE PORTION
TRO T2,MONORG ;RELOCATED .JBSYM
TRZ T3,-1-PG.BDY## ;KEEP JUST IN-PAGE PORTION
TRO T3,MONORG ;RELOCATED .JBUSY
MOVEI T1,[ ;SUBROUTINE TO CALL
MOVEM T2,.CPEDV##-.CPCDB##+.EDSYM(P1) ;STORE RELOCATED .JBSYM
MOVEM T3,.CPEDV##-.CPCDB##+.EDUSY(P1) ;STORE RELOCATED .JBUSY
MOVE T4,.CPSYB##+1 ;COUNT OF MAP WORDS TO REPLACE
MOVEM T4,.CPSYB##-.CPCDB##+1(P1) ;STORE
POPJ P,]
PUSHJ P,CPUAPP## ;FILL IN ALL CPU'S EDV'S
PUSHJ P,SETEDV## ;SETUP REMAINDER OF THE EDV
SYTBBD: SETZM .JBSYM## ;FORGET ABOUT THESE NOW (OR IF AN ERROR)
SETZM .JBUSY## ;...
POPJ P, ;RETURN
SYMPTR: BLOCK 1 ;COPY OF .JBSYM TO STUFF IN EDV
USYPTR: BLOCK 1 ;COPY OF .JBUSY TO STUFF IN EDV
;ROUTINE TO MOVE THE SYMBOL TABLE TO A HIDDEN PLACE.
;CALL:
; T1/ NUMBER OF PAGES TO MOVE
; T2/ FIRST PAGE TO MOVE
; PUSHJ P,MOVSTB
;RETURN:
; CPOPJ ALWAYS
MOVSTB: MOVEM T1,.CPSYB##+1 ;NUMBER OF PAGES IN HIDDEN SYMBOL TABLE
PUSH P,P1 ;SAVE THE AC'S
PUSH P,P2 ;...
MOVN P1,T1 ;GET -VE NUMBER OF PAGES TO MOVE
HRLZS P1 ;BUILD AN AOBJN WORD
HRRI P1,-1(T1) ;BACKWARDS INDEX FOR SYMBK1
MOVE P2,T2 ;FIRST PAGE NUMBER
ADDI P2,-1(T1) ; PLUS COUNT-1 GIVES LAST PAGE NUMBER
PUSH P,MONVFF## ;GOING TO FAKE OUT ONCMAP, SAVE REAL ORIGIN
MOVST1: MOVE T1,P2 ;PAGE OF SYMBOLS
MOVE T2,.CPMAP## ;MAP ADDRESS
HRLI T1,(<PM.DCD>B2) ;ALLOW ACCESS
MOVEM T1,.ECKSM/PAGSIZ##(T2) ;MAKE ADDRESSABLE
MOVEI T1,.EUPMP ;WHERE WE WANT IT TO BE MAPPED
MOVEM T1,MONVFF## ;SO WE DON'T CHEW UP LOTS OF VIRTUAL SPACE
MOVEI T1,PAGSIZ## ;ONLY ALLOCATE ONE PAGE AT A TIME
MOVSI T2,(<PM.DCD>B2+PM.WRT+PM.PUB)
SKIPN [CPUN##-1]
TDO T2,[PM.CSH]
PUSHJ P,ONCMAP## ;ALLOCATE A PAGE FROM SOMEWHERE
HRLI T1,.ECKSM ;OLD SYMBOL TABLE LOCATION (RE-MAPPED)
HRRI T1,.EUPMP ;NEW, SAFER, LOCATION
BLT T1,.EUPMP+PAGSIZ##-1 ;MOVE PART OF THE SYMBOL TABLE
MOVE T1,.CPMAP## ;GET MAP ADDRESS
MOVE T1,.EUPMP/PAGSIZ##(T1) ;GET MAP CONTENTS
MOVEM T1,SYMBK1##(P1) ;STORE SO DDT CAN RE-MAP IT IN
ANDI T1,17777 ;ISOLATE PAGE NUMBER
IDIVI T1,^D36 ;COMPUTE POSITION IN NXMTAB
; MOVE T2,BITTBL##(T2) ;GET BIT FOR PAGE
MOVN T3,T2 ;BITTBL NOT SET UP YET
MOVSI T2,(1B0) ; SO WE MUST DO IT BY HAND
LSH T2,(T3) ;GET THE BIT
IORM T2,NXMTAB##(T1) ;MARK THE PAGE SO IT DOESN'T GET RE-USED
SUBI P1,2 ;EFFECT A "BACKWARDS" AOBJN
SUBI P2,1 ;NEXT PAGE OF THE SYMBOL TABLE
AOBJN P1,MOVST1 ;MOVE THE WHOLE THING
POP P,MONVFF## ;BACK TO NORMAL ALLOCATION NOW
POP P,P2 ;RESTORE AC'S
POP P,P1 ;...
POPJ P, ;RETURN
SUBTTL COMPUTE MONITOR SYMBOL TABLE CHECKSUM, FIXUP PATSIZ
PATFIX: SETZM MSTCKS## ;INITIALIZE MONITOR SYMBOL TABLE CHECKSUM
SKIPGE P1,.JBSYM## ;GET POINTER TO SYMBOL TABLE
JRST PATFI1 ;A NON-EXTENDED SYMBOL TABLE
SKIPN U,P1 ;COPY ADDRESS TO U, SKIP IF LOADED WITH SYMBOLS
POPJ P, ;NO SYMBOLS, NOT MUCH WE CAN DO
HRRI U,.SYCNT(P1) ;GET LENGTH OF VECTOR
PUSHJ P,REFMEM## ;FETCH THE CONTENTS
CAIGE T1,.SYSTB+<.SYSTL*2> ;IS BLOCK LONG ENOUGH?
STOPCD SYTBBD,DEBUG,SYVCTS, ;++SYMBOL VECTOR TOO SHORT
HRRI U,.SYSTB+.SYTYP(P1) ;GET FLAGS,,LENGTH OF DEFINED SYMBOL TABLE
PUSHJ P,REFMEM## ;FETCH THE CONTENTS
AND T1,[SY.LEN] ;KEEP JUST THE LENGTH
PUSH P,T1 ;SAVE LENGTH
HRRI U,.SYSTB+.SYADR(P1) ;GET ADDRESS OF DEFINED SYMBOL TABLE
PUSHJ P,REFMEM## ;FETCH THE CONTENTS
MOVE P1,T1 ;COPY ADDRESS TO P1
POP P,P2 ;LENGTH TO P2
JRST PATFI2 ;PROCEED
PATFI1: HLRE P2,P1 ;GET -VE LENGTH OF SYMBOL TABLE
MOVMS P2 ;MAKE IT POSITIVE
HRRZS P1 ;ISOLATE SYMBOL TABLE ADDRESS
PATFI2: SKIPA T1,[RADIX50 4,PAT] ;FIND "PAT" GLOBAL, SKIP AOS OF P1
PATLOP: AOS P1 ;ADVANCE POINTER INTO SYMBOL TABLE
PUSHJ P,PATMAP ;MAP A WORD OF THE SYMBOL TABLE
MOVE T3,(T4) ;FETCH IT
EXCH T3,MSTCKS## ;SWAP WITH PREVIOUS CHECKSUM
ROT T3,1 ;MUNGE IT AROUND
ADD T3,MSTCKS## ;ADD IN PREVIOUS CHECKSUM
EXCH T3,MSTCKS## ;PUT IT BACK
TRNN P2,1 ;IS THIS THE SYMBOL VALUE WORD?
SOJA P2,PATLOP ;NO, GO DO IT
PUSHJ P,PATMA1 ;MAP PREVIOUS WORD OF THE SYMBOL TABLE
CAMN T1,(T4) ;WAS THIS "PAT"?
JRST GOTPAT ;YES
PATLO1: SOJG P2,PATLOP ;GET NEXT SYMBOL,VALUE PAIR
POPJ P, ;NOT FOUND
GOTPAT: PUSHJ P,PATMAP ;MAP THE SYMBOL VALUE WORD
HRRZ T3,(T4) ;GET VALUE OF "PAT" SYMBOL
HRRZ T4,PATSIZ ;CHECK WITH PATCHED INDICATION
CAILE T3,(T4) ;USE MAX
HRRM T3,PATSIZ
JRST PATLO1 ;GET NEXT SYMBOL,VALUE PAIR
;ROUTINE TO MAP A REFERENCE TO THE SYMBOL TABLE. CALLED WITH ADDRESS
;OF WORD TO REFERENCE IN P1, RETURNS EXEC VIRTUAL ADDRESS OF THE WORD
;IN T4.
PATMA1: MOVE T3,P1 ;GET ADDRESS
SOSA T3 ;DECREMENT AND SKIP
PATMAP: MOVE T3,P1 ;GET ADDRESS
SKIPL .JBSYM## ;USING EXTENDED SYMBOL TABLE?
JRST PATMA2 ;YES
HRRZ T4,P1 ;NO, JUST COPY THE ADDRESS (HALF-WORD ALWAYS)
POPJ P, ;RETURN
PATMA2: IDIVI T3,PAGSIZ## ;T3 GETS PAGE NUMBER, T4 GETS OFFSET IN PAGE
MOVEI T4,.ECKSM(T4) ;GET VIRTUAL ADDRESS
CAMN T3,PATSLT ;HAS IT CHANGED?
POPJ P, ;NO, NOTHING ELSE TO DO
MOVEM T3,PATSLT ;YES, REMEMBER FOR NEXT TIME
EXCH T4,.CPMAP## ;SAVE T4, GET EXEC MAP ADDRESS
HRLI T3,(<PM.DCD>B2+PM.PUB) ;GET BITS
MOVEM T3,.ECKSM/PAGSIZ##(T4) ;STORE ENTRY IN MAP
EXCH T4,.CPMAP## ;RESTORE T4, RESTORE EXEC MAP ADDRESS
CLRPGT (0,.ECKSM) ;FLUSH MAPPING
POPJ P, ;RETURN
PATSLT: 0
SUBTTL SET UP SYSSIZ, CHECK FOR BREAKPOINTS AND NO EDDT
PATSIZ::MOVEI T1,PAT## ;SET SIZE OF SYSTEM TO BEGINING OF PATCH AREA IN CASE
MOVEM T1,SYSSIZ## ; ONCE ONLY DIALOG RESTARTED BEFORE OVERWRITTEN
;PATSIZ SHOULD BE UPDATED EVERY TIME A PATCH IS MADE
PATSI3: MOVSI T2,-^D12 ;NUMBER OF EDDT BREAKPOINTS
CAIA ;ENTER LOOP
PATSI4: ADDI T2,$2B##-$1B##-1;OFFSET TO NEXT BREAKPOINT
SKIPG $1B##(T2) ;THIS BREAKPOINT SET?
AOBJN T2,PATSI4 ;NO, CHECK THE REST
JUMPGE T2,PATNBK ;IF .GE. 0 THEN NO BREAKPOINTS SET
CAIL T1,DDTEND## ;YES--SEE IF EDDT
JRST PATNBK ;YES--CONSISTENT SO PROCEED
;HERE WHEN BREAKPOINTS BUT NO EDDT
MOVEI T1,[ASCIZ /?Breakpoints but no EDDT
Do you want to keep EDDT? (Y or <CR>) /]
PUSHJ P,YESNO ;ASK QUES. GET ANSWER
JRST .+2 ;NO--REMOVE BREAKPOINTS
JRST PATKBK ;YES--KEEP EDDT
MOVEI T1,[ASCIZ /Type "$B $P"
/]
PUSHJ P,ICONM ;OUTPUT STATEMENT
PUSHJ P,OPOUT ;ISSUE IT
XCT BPTXCT## ;FORCE A BREAKPOINT
JRST PATSI3 ;CHECK AGAIN
PATKBK: MOVEI T1,DDTEND## ;KEEP EDDT
MOVEM T1,SYSSIZ##
PATNBK: MOVSI T2,(CAI)
CAIL T1,DDTEND## ;SEE IF EDDT INTACT
TDZA T3,T3 ;YES--CLEAR MASK (PRESERVE DEBUGF BITS)
SKIPA T3,[DF.BPT] ;GET MASK OF ALL CPUS
HLLM T2,IOG5## ;LEAVE 401 ALONE
ANDCAM T3,DEBUGF## ;CLEAR CPU MASK IF NO EDDT
PUSHJ P,CPUDDT## ;MAKE SURE CPUS CAN ENTER EDDT
POPJ P,
SUBTTL THE ONCE-ONLY CODE
ENTRY ONCE
ONCE:: 0
MOVE T1,[<PM.DCD>B2+PM.WRT+PM.PUB+NUPMPP##]
MOVEM T1,NLUPMP##+.UMUPM
MOVEM T1,NLUPMP##+.UMUPT
MOVEM T1,NLUPMP##+.UMUUP
IFN FTXMON,<
MOVSI T1,(LG.LAB+LG.LPC+1B8+1B11)
MOVEM T1,.USUPF ;TO DO A USERAC AND LOAD PCS=0 FOR THE NULL JOB
>
CLRPGT (0)
MOVE P,.CPNPD## ;WE NEED A PUSH DOWN LIST
HIDONE: JFCL HITHRU ;PATCHED TO A JRST WHEN THE HIGH SEGMENT HAS
; BEEN MAPPED (TO MAKE RESTARTS WORK)
MOVEI T1,MONEND##-MONORG ;HIGHEST ADDRESS CONTAING DATA IN THE HI SEG
TRZE T1,PG.BDY## ;ROUND UP
ADDI T1,PAGSIZ## ;LENGTH OF THE HIGH SEGMENT IN WORDS
MOVEM T1,SYSLEN## ;STORE THE LENGTH OF THE HIGH SEGMENT
PUSHJ P,SUNXMT ;SETUP NXMTAB AND FIND HIGHEST EXISTANT PAGE
MOVEM T4,SYSORG## ;SAVE HIGHEST ADDR AS WHERE TO START ALLOCATING
MOVSI T1,(JFCL) ;PATCH OUT CALL TO SETUP NXMTAB TO READ IN
MOVEM T1,BNXMTS## ; BOOTS IF DEBUGGING
PUSHJ P,BOOTSZ ;FIXUP SYSORG TO ACCOUNT FOR UNMAPPED BOOTSTRAP
PUSHJ P,BOOTFX ;FIND OUT WHERE THE MONITOR WAS READ FROM
IFN FTXMON,<PUSHJ P,BOOTMP> ;MAP BOOT INTO THE MONITOR'S ADDRESS SPACE
PUSHJ P,PATFIX ;FIXUP "PAT" GLOBAL BEFORE MOVING SYMBOL TABLE
;THE ORDER IN WHICH THE VARIOUS PIECES OF THE MONITOR ARE MOVED AROUND
;IS VERY IMPORTANT DUE TO THE ORDERING OF THE PSECTS IN THE .EXE FILE.
;DON'T CHANGE THIS ORDER UNLESS YOU KNOW WHAT YOU ARE DOING, AND THEN
;BE SMART AND DON'T CHANGE THE ORDER ANYWAY.
;
;FOR NON-EXTENDED MONITOR: MOVE HIGH SEGMENT AND THEN SYMBOL TABLE.
;
;FOR EXTENDED MONITOR: MOVE SKY HIGH SEGMENT, EXTENDED SYMBOL TABLE,
;AND THEN HIGH SEGMENT.
IFN FTXMON,<
;ALLOCATE AND MAP NON-ZERO SECTION HIGH SEGMENT
MOVE T1,[SKYORG] ;WHERE SKY HIGH SEGMENT STARTS
MOVE T2,SKYEND## ;WHERE IT ENDS
CAMLE T1,T2 ;IS THERE ANY CODE TO MOVE?
JRST ONCE4X ;NO, SKIP OVER SOME CODE
PUSHJ P,NZSCGC## ;ALLOCATE THE NON-ZERO SECTION CODE PAGES
MOVE T1,[SKYORG] ;FIRST ADDRESS IN THE SKY HIGH SEGMENT
MOVE P1,SKYEND## ;LAST ADDRESS IN THE SKY HIGH SEGMENT
TRZE P1,PG.BDY## ;ROUND UP
ADDI P1,PAGSIZ## ;...
MOVE T4,P1 ;COPY IT AS DESTINATION OF XBLT
SUB P1,T1 ;CALCULATE NUMBER OF PAGES TO MOVE
LSH P1,W2PLSH## ;...
MOVE T2,[SKYORG-1] ;BOOT READ IT IN PLACE
LSH T2,W2PLSH## ;CONVERT TO A PAGE NUMBER
ADD T2,P1 ;COMPUTE LAST PAGE IN SKY HIGH SEGMENT
MOVE T1,.CPMAP## ;ADDRESS OF EXEC MAP
HRLI T2,(<PM.DCD>B2) ;ALLOW READING
MOVEM T2,.ECKSM/PAGSIZ##(T1) ;SET UP MAPPING
XJRST [MCSEC1+.+1] ;ENTER NON-ZERO SECTION TO DO XBLTS
ONCE4: CLRPGT (0,.ECKSM) ;LET THE PROCESSOR KNOW ABOUT THE CHANGE IN THE MAP
MOVEI T2,PAGSIZ## ;NUMBER OF WORDS TO MOVE
XMOVEI T3,.ECKSM ;VIRTUAL ADDRESS TO USE IN BLT
SUBI T4,PAGSIZ## ;DESTINATION
PUSH P,T4 ;SAVE ACROSS BLT
EXTEND T2,[XBLT] ;MOVE A PAGE AT A TIME
POP P,T4 ;RESTORE DESTINATION
SOS .ECKSM/PAGSIZ##(T1) ;MAP THE NEXT PAGE
SOJG P1,ONCE4 ;LOOP FOR ALL PAGES
JRST @[0,,.+1] ;LEAVE SECTION ONE
ONCE4X: SKIPGE DEBUGF## ;DEBUGGING?
PUSHJ P,SYTBFX ;FIXUP SYSORG TO ACCOUNT FOR HIDDEN SYMBOL
; TABLE, MOVE SYMBOL TABLE TO HIGH MEMORY
;NOW SETUP A 1:1 TO SECTION 0 MAP FOR THE REST OF THE SECTION EXCLUDING FUNNY SPACE
MOVE T3,.CPEPT## ;THIS CPU'S EPT
MOVE T1,<SECTAB+(MS.HGH)>(T3) ;SECTION POINTER FOR HIGH HIGH SEG MAP
MOVE T3,.CPMAP## ;THIS CPU'S MAP
MOVEM T1,.ECKSM/PAGSIZ##(T3) ;TO MAKE THE MAP ADDRESSABLE
CLRPGT (0,.ECKSM) ;SO MAPPING CAN BE SEEN
MOVEI T1,(<PM.ICD>B2+PM.WRT+PM.PUB+PM.CSH+PM.KPM+PM.SWB)
; INDIRECT POINTERS TO SECTION 0 MAP
HRLI T1,SPTLOW##-SPTTAB## ;SPT SLOT USED FOR MAPPING SKY HIGH SEGMENT
MOVS T2,.CPCPN## ;OUR CPU NUMBER
ADD T1,T2 ;ADD THAT TO THE SPT INDEX
MOVEI T2,0 ;STARTING AT PAGE 0
ONCE4A: SKIPE (T3) ;IF THE PAGE EXISTS IN THE SECTION 0 MAP,
MOVSM T1,.ECKSM(T2) ;POINT AT IT IN THE HIGH HIGH SEG MAP
ADDI T1,1 ;NEXT PAGE
ADDI T3,1 ; ..
CAIGE T2,MONORG/PAGSIZ##-1 ;UP TO MONITOR ORIGIN?
AOJA T2,ONCE4A ;NO, DO THE NEXT PAGE
TRZ T1,(PM.SWB) ;WRITE LOCKED FROM HERE ON OUT
MOVEI T2,MONORG/PAGSIZ## ; ..
ONCE4B: MOVSM T1,.ECKSM(T2) ;POINT AT IT IN THE HIGH HIGH SEG MAP
ADDI T1,1 ;NEXT PAGE
ADDI T3,1 ; ..
CAIGE T2,<SKYORG&777777>/PAGSIZ##-1 ;UP TO THE TOP OF THE LOW HIGH SEG?
AOJA T2,ONCE4B ;NO, DO THE NEXT PAGE
MOVE T1,.CPMAP## ;NOW SETUP SKIP CPU MAPPING
DMOVE T1,.ESKPC/PAGSIZ##(T1)
TLO T1,(PM.SWB) ;WRITE ENABLE
TLO T2,(PM.SWB)
DMOVEM T1,.ECKSM+.ESKPC/PAGSIZ##
;CLEAR MAPPING FOR UNUSED PAGES
HRRZ T1,SKYEND## ;GET LAST ADDRESS IN SKY HIGH SEGMENT
TRZE T1,PG.BDY## ;ROUND UP
ADDI T1,PAGSIZ##
LSH T1,W2PLSH## ;CONVERT TO PAGE NUMBER
TRNN T1,PG.BDY## ;ANY UNUSED PAGES IN THIS SECTION?
JRST ONCE4C ;NO
MOVE T2,.CPEPT## ;GET EPT ADDRESS
HRRZ T2,<SECTAB+(MS.HGH)>(T2) ;GET POINTER TO SKY HIGH SEGMENT
LSH T2,P2WLSH## ;CONVERT TO ADDRESS
ADD T1,T2 ;ADD IN FIRST FREE PAGE NUMBER
SETZM (T1) ;ZERO MAPPING INFORMATION
CAIGE T1,PG.BDY##(T2) ;DONE ALL PAGES?
AOJA T1,.-2 ;NO, LOOP
ONCE4C:
>; END IFN FTXMON
MOVE T1,SYSLEN## ;NUMBER OF WORDS IN CODE SEGMENT
MOVSI T2,(<PM.DCD>B2+PM.WRT+PM.PUB+PM.CSH)
PUSHJ P,ONCMAP## ;FILL IN MAP SLOTS
MOVEI T1,MONORG-1 ;BOOT READ THIS IN PLACE
ADD T1,SYSLEN## ;HIGHEST ADDRESS - 1 IN THE MONITORS HI SEG
LSH T1,W2PLSH## ;CONVERT TO HIGHEST PAGE - 1
MOVE T2,.CPMAP##
HRLI T1,(<PM.DCD>B2)
MOVEM T1,.ECKSM/PAGSIZ##(T2)
HRRI T1,MONORG ;STARTING VIRTUAL ADDRESS OF THE MONITORS HI SEG
ADD T1,SYSLEN## ;HIGHEST VIRTUAL ADDRESS IN MONITORS HI SEG
HRRZ T2,T1 ;COPY THAT
MOVE T3,SYSLEN## ;LENGTH OF THE MONITORS HI SEG
LSH T3,W2PLSH## ;NUMBER OF PAGES IN THE MONITORS HI SEG
HRLI T1,.ECKSM ;BLT HIGH SEG FROM THIS V.A.
ONCE5: CLRPGT (0,.ECKSM) ;LET THE PROCESSOR KNOW ABOUT THE CHANGE IN THE MAP
SUBI T1,PAGSIZ## ;DESTINATION
PUSH P,T1 ;SAVE ACROSS THE BLT
BLT T1,-1(T2) ;BLT A PAGE OF THE HIGH SEG FROM WHERE IT
; WAS READ TO WHERE IT IS TO LIVE
MOVE T1,.CPMAP##
SOS .ECKSM/PAGSIZ##(T1)
POP P,T1 ;RESTORE THE BLT POINTER
SUBI T2,PAGSIZ## ;NEXT LOWEST PAGE BOUNDARY
SOJG T3,ONCE5 ;LOOP UNTIL ALL HI SEG PAGES HAVE BEEN MOVED
SKIPGE DEBUGF## ;DEBUGGING?
IFE FTXMON,<
PUSHJ P,SYTBFX ;FIXUP SYSORG TO ACCOUNT FOR HIDDEN SYMBOL
; TABLE, MOVE SYMBOL TABLE TO HIGH MEMORY
>; END IFE FTXMON
IFN FTXMON,<
PUSHJ P,FILEDV ;FILL IN .CPEDV FOR ALL CPUS
>; END IFN FTXMON
HITHRU: MOVSI T1,(JRST) ;PREVENT ANOTHER ATTEMPT TO SETUP THE
HLLM T1,HIDONE ; MAPPING FOR THE HIGH SEGMENT
IFE FTXMON,<PUSHJ P,BOOTMP> ;MAP BOOT INTO THE MONITOR'S ADDRESS SPACE
IFN FTXMON,<XJRST [MCSEC1+HIGHIN]> ;GET INTO SECTION 1 SO CAN LOOK AT THINGS
HIGHIN:
IFN FTXMON,<XJRST [MCSEC0+.+1]> ;RETURN TO SECTION 0
PUSHJ P,BSTRNG ;CONVERT ARGUMENTS TO BOOTS TO A STRING
; FOR AUTO-RELOAD
SETOM DINITF## ;TELL AUTCON WHAT KIND OF CORE TO GET
IFN FTXMON,<
MOVSI T1,(MS.SAT) ;DATA SECTION FOR SATS, ETC.
MOVEM T1,RELMD1 ;FIRST ALLOCATED WORD IN SECTION 2
MOVEM T1,FFMD1 ;FIRST FREE WORD IN SECTION 2
PUSHJ P,ALCSMP ;ALLOCATE A MAP FOR THIS SECTION
MOVSI T1,(MS.MEM) ;DATA SECTION FOR PAGTAB/MEMTAB
PUSHJ P,ALCSMP ;ALLOCATE A SECTION MAP FOR SECTION 2
IFN FTSCA,<
SKIPN [SCASIZ##] ;ANY SCA FREE POOL?
JRST NOSCA ;NO, NO SECTION MAP OR BUFFERS NEEDED
MOVSI T1,(MS.SCA) ;DATA SECTION FOR SCA BUFFERS
PUSHJ P,ALCSMP ;ALLOCATE A SECTION MAP FOR SECTION 4
MOVSI T1,(MS.SCA) ;THEN ALLOCATE TONS OF MEMORY
MOVEM T1,SCALOC## ;SET STARTING ADDRESS OF SCA FREE POOL
MOVEI T2,SCASIZ## ;SIZE OF THE POOL
ADD T2,T1 ;COMPUTE END ADDRESS
MOVE T3,T2 ;GET A COPY
ADDI T3,PG.BDY## ;COMPUTE FIRST FREE PAGE ADDRESS FOLLOWING THE POOL
TRZ T3,PG.BDY## ;...
MOVEM T3,SCAFRE## ;SAVE FIRST FREE ADDRESS
PUSHJ P,NZSCGT## ;LET ONCMOD ALLOCATE IT FOR US
PUSHJ P,BHDINI## ;INITIALIZE BUFFER HEADERS AND DESCRIPTORS
PUSHJ P,SC.INI## ;INITIALIZE THE SCA PROTOCOL MODULE
NOSCA:
>; END IFN FTSCA
MOVSI T1,(MS.SCN) ;DATA SECTION FOR SCNSER DATA BASE
PUSHJ P,ALCSMP ;ALLOCATE A SECTION MAP FOR SECTION 3
HRROI T1,ALCSHM ;NOW ALLOCATE SKY HIGH SEGMENT SECTION MAPS
; FOR OTHER CPUS
PUSHJ P,CPUAPP## ;DO IT
>
IFE FTXMON,<
;ALLOCATE DECNET BUFFER MAPS FOR OTHER CPUS
>
IFN FTKL10,<
;HERE TO INITIALIZE LOWTAB (CORE BLOCKS FOR IOWD'S)
SETLOW: MOVE T1,LOWPTR## ;ABOJN POINTER TO LOWTAB
SETOM (T1) ;SET IT TO ALL ONES
AOBJN T1,.-1 ; ..
MOVEI P1,LTINIT## ;ADDRESS OF TABLE CONTAINING ADDRESSES OF
; LOWER CORE FOUR WORD BLOCKS
HRRZ P2,LTINIT## ;ADDRESS OF FIRST FOUR WORD BLOCK
MOVEM P2,LOWLOC## ;STORE THAT AS ORIGIN OF FOUR WORD IOWD SPACE
SETLO1: SKIPN T2,(P1) ;NEXT CHUNK OF FOUR WORD SPACE
JRST SETLO2 ;ALL DONE
HLRZ T1,(P1) ;NUMBER OF FOUR WORD BLOCKS IN THIS CHUNK
HRRZS T2 ;0,,STARTING ADDRESS OF THIS CHUNK
SUBI T2,(P2) ;RELATIVE ADDRESS WITHIN IOWD SPACE
LSH T2,-2 ;FOUR WORDS PER BLOCK
IDIVI T2,^D36 ;NUMBER OF BITS REPRESENTING FOUR WORD BLOCKS
HRLS T2 ;WHERE THEY START IN THE TABLE
ADD T2,LOWPTR## ;MAKE AN AOBJN POINTER TO THE TABLE
PUSHJ P,SETZRS## ;INDICATE THAT THOSE BLOCKS ARE AVAILABLE
AOJA P1,SETLO1 ;LOOP UNTIL ALL CHUNKS ARE MARKED IN BIT TABLE
SETLO2:
>
IFN FTAUTC,<
MOVE T1,MONVFF## ;WHERE TO START ALLOCATION
MOVEM T1,CORLOC## ;TELL AUTCON
PUSHJ P,AUTCON## ;SEE WHAT DISKS, TAPES WE HAVE
>
PUSHJ P,ONCINT ;START INTERVAL TIMER GIVING CLOCK TICKS
; FOR ONCE, SET UP ONCKLT SO APRINT AND
; OPRFIL CAN USE IT TO START UP TIMER AGAIN.
SETTYO
SKIPGE DEBUGF## ;IF DEBUGGING DO NOT
JRST ONCE6 ; DO SYSCHK
HLRZ T1,SYSCKI##
CAIE T1,(JSR)
JRST ONCE6
MOVE P,.CPNPD## ;SET UP A STACK
MOVEI T1,[ASCIZ /SYSCHK(N,Y):/]
MOVEI T2,[ASCIZ /NO ;Default answer/]
PUSHJ P,ASKDEF ;ASK THE QUESTION
JRST ONCE6 ;JUST CR-LF
PUSHJ P,ALTM##
PUSHJ P,COMTYI##
CAIN T3,"Y"
XCT SYSCKI##
ONCE6: MOVE P,.CPNPD## ;SET UP A STACK
SKIPL DEBUGF##
JRST ONCE7
SETZM TTFCOM##+TTFCXI##
ONCE7: SETTYO
PUSHJ P,CRLF##
PUSHJ P,PATSIZ ;SET UP SYSSIZ, CHECK FOR B.P.'S AND NO EDDT
MOVEI T1,CONFIG##
PUSHJ P,CONMES##
MOVEI T1,[ASCIZ / /]
PUSHJ P,CONMES##
MOVEI T1,SYSDAT##
PUSHJ P,CONMES##
PUSHJ P,CRLF## ;ADD CRLF
PUSHJ P,OPOUT
;HERE TO DETERMINE IF THIS CPU IS A 166, KA10, OR
; KI10 AND SETUP THE NUMBER OF CLOCK TICKS PER
; SECOND ACCORDING TO POWER LINE FREQUENCY.
MOVEI F,CT.P6 ;ASSUME A 166 (PDP-6) PROCESSOR
MOVEI T4,M.TPS## ;ASSUME LINE FREQUENCY UNKNOWN
;EXCEPT FROM MONGEN
JFCL 17,.+1 ;CLEAR ALL FLAGS
JRST .+1 ;SET PC CHANGE FLAG IF CPU IS A 166
JFCL 1,CPU166 ;BRANCH IF PDP-6
SETZ T1, ;THE TEST FOR A KL10 PROCESSOR
BLT T1,0 ;IS A NO-OP BLKT LEAVING AC NON-ZERO
JUMPE T1,CPNTLS ;JUMP IF NOT KL OR KS
MOVEI P1,1
SETZ P2, ;BIG BINARY INTEGER
MOVEI P4,1 ;ONE DIGIT BYTE
EXTEND P1,[CVTBDO] ;CONVERT WILL ABORT
TLNN P4,200000 ;TEST EFFECT ON N
JRST CPKS10
JRST CPKL10
CPNTLS: HRLOI T1,020640 ;WE HAVE A KA OR KI, FIND ITS TYPE
IBP T1 ; ..
TLNN T1,1 ;SKAP IF KA10
JRST CPKI10 ;NO--MUST BE KI10
;HERE IF CPU IS A KA10. DETERMINE LINE FREQUENCY BY
;TIMING ROTATES
;DEPENDS ON:
;MAX. POWER LINE FREQUENCY VARIATION OF PLUS OR MINUS 2 HERTZ.
;SHIFT TIME IN KA10 OF 150NS. PLUS OR MINUS 5%
MOVEI F,CT.KA ;REMEMBER THIS IS A KA10
;HERE IF KL10 OR KS10
CPKL10: APRID T1 ;READ SERIAL NUMBER
ANDI T1,7777 ;MASK OUT UCODE VER
MOVEM T1,.CPASN## ;SAVE AS REAL #
MOVEI F,CT.KL ;SET TYPE AS KL10
JRST CPU166 ;NO CLOCK ON A KL
CPKS10: APRID T1 ;READ SERIAL NUMBER
ANDI T1,77777 ;MASK OUT CRUFT
MOVEM T1,.CPASN## ;SAVE IN CDB
MOVEI F,CT.KS ;SET TYPE AS KS
JRST CPU166 ;NO LINE CLOCK ON KS
;HERE IF CPU IS A KI10. CHECK APR STATUS BIT
CPKI10: CONI PAG,T1 ;READ THE PROCESSORS SERIAL NUMBER
LSH T1,-^D26 ;RIGHT ADJUST IT
MOVEM T1,.CPASN## ;STORE IT FOR PROPRIETARY PROGRAMS
MOVEI F,CT.KI ;REMEMBER THIS IS A KI10
CONI APR,T1 ;GET APR STATUS
TLNE T1,(IP.50H) ;50 HERTZ POWER?
SKIPA T4,[EXP ^D50] ;50 HERTZ POWER LINE FREQUENCY
MOVEI T4,^D60 ;60 HERTZ POWER LINE FREQUENCY
CPU166: CAME F,.CPTYP## ;DO WHAT THE MONITOR WAS BUILT FOR AND
; THE CURRENT MACHINE AGREE?
STOPCD .,HALT,WCT ;++WRONG CPU TYPE
MOVEM T4,TICSEC## ;NUMBER OF CLOCK TICKS PER SECOND
MOVSI T1,(ST.CYC) ;SET BIT SIX OF STATES IF 50 HZ POWER
CAIN T4,^D50 ;50 HERTZ POWER?
IORM T1,STATES## ;YES
IMULI T4,^D60 ;NUMBER OF TICS PER MINUTE
MOVEM T4,TICMIN## ;SAVE THAT
IMULI T4,^D60*^D24 ;NUMBER OF TICS PER DAY
MOVEM T4,MIDNIT## ;SAVE THAT FOR MIDNIGHT CHECKING
JRST WHYLOP ;GO ASK WHY RELOAD
;SETUP INTERNAL TIMER ON KL10 TO MIMIC CLOCKS OF EARLIER CPUS.
IFN FTKL10,<
ONCINT: CONO MTR,0 ;MAKE SURE INT. TIME DOESNT INTERRUPT
MOVEI T2,^D1666+TO.SIT+TO.CTD ;WORD TO KEEP TIMER GOING
MOVE T1,STATES## ;GET STATES
TLNE T1,(ST.CYC) ;50 HZ?
MOVEI T2,^D2000+TO.SIT+TO.CTD ;50 HZ WORD TO KEEP TIMER GOING
MOVEM T2,ONCKLT ;CONO TIM,@ONCKLT STARTS TIMER GOING AGAIN
CONO TIM,TO.CIT(T2) ;CLEAR INTERNAL TIMER & START FIRST TIME
POPJ P, ;RETURN
>;END IFN FTKL10
IFN FTKS10,<
ONCINT: WRAPR SP.SSF!SP.ITI ;TURN ON INTERVAL TIMER
MOVEI T2,^D17*10000 ;60HZ
MOVE T1,STATES ;GET STATES
TLNE T1,(ST.CYC) ;50HZ?
MOVEI T2,^D20*10000 ;YES
WRINT T2 ;SET UP INTERVAL REGISTER
PUSHJ P,UBAPIS## ;INIT AND SET UP UBA PI'S
MOVEI T1,VECTB1## ;GET UBA1'S INTERRUPT VECTOR TABLE
MOVEM T1,.EPVIT## ;INITIALIZE IN EPT
MOVEI T1,VECTB3## ;... DITTO FOR UBA3
MOVEM T1,.EPVIT##+2 ;...
POPJ P,
>;END IFN FTKS10
;ASK OPERATOR REASON FOR RELOAD
;ANSWER WILL BE PUT IN LOG FILE DAEMON
;ALONG WITH ARBITRARY OPERATOR COMMENT, IF ANY.
;ALLOW UNIQUE ABBREVIATION
WHYLOP: SETZM CRSHAC## ;CLEAR OUT CRASH AC AREA FOR OPERATOR COMMENT
MOVE T1,[XWD CRSHAC##,CRSHAC+1]
BLT T1,CRSHAC##+17
SKIPL DEBUGF## ;DEBUGGING STAND-ALONE?
JRST WHY0 ;NO,
MOVE T1,SACOD ;YES, FLAG STAND-ALONE
MOVEM T1,WHYCOD## ;FOR DAEMON
JRST DATLOP ;GO ASK DATE
WHY0: MOVE T1,CRSWHY## ;GET STOPCD CHECKSUM FROM PREVIOUS LOAD
JUMPE T1,WHY01 ;JUMP IF NONE
PUSHJ P,CHKDCS ;CHECK DATE/TIME CHECKSUM
JRST WHY01 ; IF PINK CRASH
MOVEM T1,WHYCOD## ;AND STORE AS REASON FOR RELOAD
JRST DATLOP ;SKIP QUESTION
WHY01: MOVEI T1,[ASCIZ /Why reload: /]
MOVEI T2,[ASCIZ /OTHER ;OPR did not answer/]
PUSHJ P,ASKDEF ;TYPE OUT AND WAIT FOR INPUT
JRST WHYSHT ;JUST CR TYPED, GIVE SHORT HELP
PUSHJ P,CTEXT## ;GET FIRST WORD LEFT JUSTIFIED SIXBIT IN T2
JUMPN T2,WHY1 ;ANYTHING BEFORE FIRST BREAK?
CAIN T3,"/" ;NO, IS BREAK A SLASH?
JRST WHYLNG ;YES, ASSUME /H AND GIVE LONG HELP
JRST WHYSHT ;NO, GIVE SHORT HELP
WHY1: MOVE P1,T3 ;SAVE BREAK
MOVE T1,[-WHYLEN,,WHYTAB] ;POINT TO TABLE
PUSHJ P,FNDNAM## ;LOOKUP ABBREV.
JRST WHYSHT ;GIVE HELP
MOVE T1,WHYTAB(T1) ;NO, GET UNABBREVIATED SIXBIT CODE
MOVEM T1,WHYCOD## ;AND STORE IN GETTAB FOR DAEMON
JUMPE P1,[CAME T1,OTHCOD ;IF END OF LINE AND RESPONSE WAS OTHER,
JRST DATLOP ; TELL HIM THAT OTHER REQUIRES
MOVEI T1,OTHMSG ; A COMMENT AND GO BACK TO WHYLOP
JRST WHYTYP] ; TO ASK AGAIN
;HERE TO GET OPERATOR COMMENT AND STORE IN CRASH ACS
MOVEI T1,20*5-1 ;YES, NO. OF ASCIZ CHAR IN 20 WORDS
;OF CRASH ACS. SAVE ROOM FOR NULL
MOVEM T1,WHYCNT ;STORE FOR LOOP COUNT
MOVE P1,[POINT 7,CRSHAC##] ;BYTE PTR FOR WHERE TO PUT
WHY4: PUSHJ P,COMTYI## ;GET NEXT CHARACTER (EVEN IF ;)
JUMPE T3,WHY5 ;END OF STRING (GETLIN STORES NULL)
CAIL T3,12 ;NO, END OF LINE CHAR?
CAILE T3,15 ;"
SKIPA ;NO
JRST WHY5 ;YES, DO NOT STORE, JUST GO STORE NULL
SOSG WHYCNT ;ANY MORE ROOM IN CRSHAC BLOCK?
JRST WHY5 ;NO, GO STORE NULL AND QUIT
IDPB T3,P1 ;YES, STORE ASCIZ CHARACTER
JRST WHY4 ;GO GET MORE
;HERE WHEN FINISHED COPYING OPERATOR COMMENT TO CRASH ACS
WHY5: MOVEI T3,0 ;NULL
IDPB T3,P1 ;STORE ON END SO ASCIZ
JRST DATLOP ;GO ASK FOR DATE
;HERE TO TYPE SHORT HELP MESSAGE ON ANY ERROR
WHYSHT: MOVEI T1,WHYMS1 ;ADR OF SHORT HELP MESSAGE
PUSHJ P,ICONM ;INITIALIZE BUFFER AND MOVE CHAR
PUSHJ P,OPOUT ;START TYPING
JRST WHYLOP ;GO BACK TO ASK WHY RELOAD AGAIN
;HERE TO TYPE LONG HELP MESSAGE ON /H
WHYLNG: MOVEI T1,WHYMS2 ;ADR OF LONG HELP MESSAGE
WHYTYP: PUSHJ P,ICONM ;INITIALIZE AND MOVE CHAR TO OUTPUT BUFFER
PUSHJ P,OPOUT ;START TYPING
JRST WHYLOP ;GO BACK AND ASK WHY RELOAD AGAIN
WHYCNT: 0 ;COUNT FOR NO CHAR LEFT IN CRASH ACS
;LIST OF POSSIBLE WHY RELOAD ANSWERS (CAN BE ABBREVIATED)
; ORDER IS IMPORTANT. OPERATOR SHOULD ANSWER THE EARLIEST ONE
; IN TABLE WHICH APPLIES (WHEN MORE THAN ONE DOES)
WHYTAB:
;PREVIOUS SYSTEM PROBLEM:
SIXBIT /OPR/
SIXBIT /PARITY/
SIXBIT /POWER/
SIXBIT /STATIC/
SIXBIT /HARDWA/
SIXBIT /NXM/
SIXBIT /HALT/
SIXBIT /LOOP/
SIXBIT /HUNG/
;PREVIOUS NON-TIMESHARED USE OF SYSTEM:
SIXBIT /PM/
SIXBIT /CM/
SACOD: SIXBIT /SA/
;DIFFERENT MONITOR WANTED:
SIXBIT /NEW/
SIXBIT /SCHED/
;OPERATOR DOESNT KNOW OR NOT IN TABLE (YET):
OTHCOD: SIXBIT /OTHER/ ;ALWAYS LAST OF TABLE
WHYLEN==.-WHYTAB ;LENGTH
;ADD ENTRIES IN MIDDLE ACCORDING TO PRECEDENCE, NOT AT END
;SHORT MESSAGE FOR JOGGING MEMORY
WHYMS1: ASCIZ "OPR,PARITY,POWER,STATIC,HARDWARE
NXM,HALT,LOOP,HUNG
PM,CM,SA
NEW,SCHED
OTHER
/H for help
"
;LONG MESSAGE FOR /H
WHYMS2: ASCIZ /Type first word which applies (abbreviations ok) followed by
any comment:
OPR operator error
PARITY memory parity stop
POWER power failure
NXM non-existent memory stop
STATIC static electric
HARDWARE hardware malfunction
HALT program stop
LOOP loop in exec mode
HUNG no response
PM preventative maint
CM corrective maint
SA stand alone
NEW new monitor
SCHED scheduled reload
OTHER you don't know why or not any of the above
/
BUFLEN==.-WHYMS2 ;LENGTH OF ONCE TTY BUFFER
; MAKE IT LONG ENOUGH FOR THIS BIG MESSAGE
OTHMSG: ASCIZ /%OTHER requires a comment
/
;ASK FOR TODAY'S DATE AND CONVERT
;DATE STORED AS ((Y-64)*12.+M-1)*31.+D-1
DATAGN: ADJSP P,-1 ;FIX THE STACK (/DATE PROCESSING)
AOSA AGNFLG ;DOING IT AGAIN
DATLOP: SETZM AGNFLG ;FIRST TIME
MOVEI T1,[ASCIZ /Date: /]
SETZM FETFLG ;ASSUME NO FE TIME
PUSHJ P,GFETIM## ;SEE IF FRONT END KNOWS TIME
JRST DATLP1 ;IT DOES NOT, TRY FOR LAST CRASH TIME
JRST DATL2A ;IT DOES, USE IT FOR A DEFAULT
DATHLP: PUSHJ P,RSTDEF ;SOMETHING WENT WRONG, GIVE OPR TIME TO PONDER
SETZM FETFLG ;FORGET WHATEVER THE FE MAY HAVE TOLD US
MOVEI T1,[ASCIZ /Please type today's date as MON-DD(-YY)
/]
DATLP1: SETOM LOCSEC## ;NO TIME KNOWN YET
SETOM CRSDAY ;FAR FAR DISTANT PAST
PUSHJ P,CHKDCS
JRST GOASK
MOVE T2,T4 ;COPY DATE
ANDI T2,17 ;MASK OUT MONTH
MOVEM T2,LOCMON## ;STORE
MOVE T1,T4
LSH T1,-4 ;SHIFT OFF MONTH
MOVE T2,T1 ;COPY DATE
ANDI T2,37 ;MASK OUT DAY
MOVEM T2,LOCDAY## ;STORE IN COMMON
LSH T1,-5 ;SHIFT OFF DAY
ADDI T1,^D1970 ;ADD IN BASE
MOVEM T1,LOCYER## ;STORE
HRRZ T1,CRSDTM## ;GET TIME
IDIVI T1,^D60*^D60 ;GET HOURS
IDIVI T2,^D60 ;GET MIN
MOVEM T1,LOCHOR## ;STORE HOURS
MOVEM T2,LOCMIN## ;STORE MIN
MOVEM T3,LOCSEC## ;STORE SECONDS
PUSHJ P,CHKMNT## ;SEE IF PASSED THROUGH MIDNIGHT WHILE RELOADING
CAIA
DATL2A: SETOM FETFLG ;GOT TIME FROM FE
PUSHJ P,THSDA##
IFN FTDTCK,<
PUSHJ P,SUDATE## ;COMPUTE DATE TOO (TO PRINT DOW)
>;FTDTCK
DATLP2: MOVE T1,THSDAT##
MOVEM T1,CRSDAY
MOVE T1,DEFSP ;GET DEFAULT STRING POINTER
MOVEM T1,DEFPTR ;STORE AS POINTER
MOVE T1,LOCMON## ;GET MONTH
PUSHJ P,DECDEF ;DO THE DEFAULT STUFF
MOVEI T1,"-" ;ADD A DASH
IDPB T1,DEFPTR ; ..
MOVE T1,LOCDAY## ;GET THE DAY
PUSHJ P,DECDEF ;STORE AS PART OF DEFAULT
MOVEI T1,"-" ;ADD 1 MORE DASH
IDPB T1,DEFPTR ; ..
MOVE T1,LOCYER## ;GET THE YEAR
PUSHJ P,DECDEF ;ADD THAT ON
SKIPN FETFLG ;GOT TIME FROM FE?
JRST DATL2B ;NO
SETOM CRSDAY ;YES, FORGET CRASH TIME
SKIPA T1,[[ASCIZ / ;From FE clock/]]
DATL2B: MOVEI T1,[ASCIZ / ;From last crash/]
PUSHJ P,DEFSTR ;ADD TO DEFAULT
IDPB T2,DEFPTR ;STORE ZERO
MOVEI T1,[ASCIZ /Date: /]
MOVEI T2,DEFBUF
SKIPN FETFLG ;TIME FROM FE?
SKIPA T3,OPRCNT ;NO, USE OPRCNT
MOVEI T3,^D5 ;YES, REDUCE WAIT TO 5 SECS
PUSHJ P,ASKDFT ;ASK QUESTION
JRST DATLO2
JRST GOASK1 ;GO PARSE THE ANSWER
GOASK: PUSHJ P,ASKGET
JRST DATHLP
GOASK1: MOVEI T1,LOCYER##
PUSHJ P,GTDATE## ;GET DATE
JRST DATHLP ;ERROR
MOVE T2,LOCYER##
SUBI T2,^D1900
CAMGE T2,ONCYER
JRST DATHLP
MOVE T1,LOCMON## ;NOW CHECK DAY ARG.
SOS T1
LDB T2,PMONTB##
AOS T2
SOJN T1,DATLO1 ;JUMP IF NOT FEB
MOVE T1,LOCYER## ;LEAP YEAR?
TRNN T1,3
AOS T2 ;YES - 29 DAYS
DATLO1: CAML T2,LOCDAY## ;CHECK DAY ARG.
JRST DATLO2 ;OK
MOVEI T1,[ASCIZ/?Illegal day
/]
PUSHJ P,ICONM
PUSHJ P,OPOUT
JRST DATHLP
DATLO2: PUSHJ P,THSDA## ;COMPUTE & STORE THSDAT
IFN FTDTCK,<
PUSHJ P,SUDATE## ;COMPUTE DATE TOO (FOR DOW PRINTING)
>;FTDTCK
MOVE T1,THSDAT##
CAML T1,CRSDAY
JRST VALID
MOVEI T1,[ASCIZ /
%Specified date is prior to last crash.
Last crash date: /]
PUSHJ P,ICONM
MOVEI T1,DEFBUF
JRST VALID1
;ROUTINE TO CHECK DATE/TIME CHECKSUM
;RETURNS CRASH DATE IN T4
CHKDCS: HLRZ T4,CRSDTM##
HRRZ T2,CRSDTM##
ADD T2,T4 ;ADD DATE AND TIME
HLRZ T3,CRSWHY##
ADD T2,T3 ;PLUS STOPCD NAME
HRRZ T3,CRSSTS##
ADD T2,T3
ADDI T2,507601 ;PLUS MAGIC CONSTANT
HRRZ T3,CRSCHK## ;GET CHECKSUM COMPUTED BY COMMON
CAIN T3,(T2) ;MATCH?
AOS (P)
POPJ P,
;CODE TO VALIDATE THE DATE JUST TYPED IN
VALID: MOVE T1,ONCMON ;FORM 12 BIT DATE FOR COMPARISON
IMULI T1,^D31
MOVEM T1,CHKDAT
MOVE T1,ONCDAY
SUBI T1,1+^D31
ADDM T1,CHKDAT
MOVE T1,ONCYER
SUBI T1,^D64 ;ADJUST TO T=0
IMULI T1,^D12*^D31
ADD T1,CHKDAT
CAMG T1,THSDAT##
IFN FTDTCK,<
JRST VALID2 ;OK, BUT ASK OPR TO CONFIRM WHAT HE TYPED
>
IFE FTDTCK,<
JRST TIMLOP ;OK IF TODAY .GE. CREATION DAY
>;FTDTCK
MOVEI T1,[ASCIZ /
%Specified date is prior to monitor creation date.
Creation date: /]
PUSHJ P,ICONM ;QUESTION EARLY DATE
MOVEI T1,SYSDAT##
VALID1: PUSHJ P,CONMES##
PUSHJ P,OPOUT
VALID2: MOVEI T1,[ASCIZ /
Specified date: /]
PUSHJ P,ICONM
PUSHJ P,PRDAYD## ;TYPE DAY AND DATE
PUSHJ P,OPOUT
SKIPE FETFLG ;DID DATE/TIME COME FROM FE?
PUSHJ P,RSTDEF ;YES, GIVE OPR TIME TO DISLIKE
MOVEI T1,[ASCIZ /
Is this correct? (Y or N)/]
MOVEI T2,[ASCIZ/YES ;default answer/]
PUSHJ P,YESNOD
JRST DATHLP ;NO, TRY AGAIN
JRST TIMLOP ;HE LIKES IT ANYWAY
;CONSTANTS, MONTH,DAY,YEAR FROM MONGEN
ONCMON: M.MON##
ONCDAY: M.DAY##
ONCYER: M.YEAR##
CHKDAT: Z ;LOCAL STORAGE FOR DATE (12 BIT)
CRSDAY: Z
FETFLG: Z ;-1 IF GOT DATE FROM A FE
AGNFLG: Z ;0 IF FIRST TIME WE ARE GETTING THE DATE/TIME
;GET TIME OF DAY
TIMHLP: SETZM FETFLG ;FORGET ANY TIME FROM THE FE
PUSHJ P,RSTDEF ;GIVE OPR TIME TO PONDER
SKIPA T1,[[ASCIZ /Please type time as HHMMSS or HH:MM:SS
/]]
TIMLOP: MOVEI T1,[ASCIZ /Time: /]
SKIPGE LOCSEC## ;DO WE KNOW TIME
JRST ASKTIM ;NO--GO ASK FOR IT
MOVE T1,DEFSP
MOVEM T1,DEFPTR
MOVE T1,LOCHOR## ;SETUP DEFAULT
PUSHJ P,DECDEF ; ..
MOVEI T1,":"
IDPB T1,DEFPTR
MOVE T1,LOCMIN## ; ..
PUSHJ P,DECDEF ; ..
MOVEI T1,":"
IDPB T1,DEFPTR
MOVE T1,LOCSEC##
PUSHJ P,DECDEF
SKIPE FETFLG ;GOT TIME FROM FE?
SKIPA T1,[[ASCIZ / ;From FE clock/]]
MOVEI T1,[ASCIZ / ;From last crash or previous answer/]
PUSHJ P,DEFSTR ;ADD TO DEFAULT
IDPB T2,DEFPTR ;STORE ZERO
MOVEI T1,[ASCIZ /Time: /]
MOVEI T2,DEFBUF
SKIPN FETFLG ;TIME FROM FE?
SKIPA T3,OPRCNT ;NO, USE OPRCNT
MOVEI T3,^D5 ;YES, REDUCE WAIT TO 5 SECS
PUSHJ P,ASKDFT ;GO ASK ABOUT TIME
JRST HAVTIM ;JUST A CR
JRST ASKTM1
ASKTIM: PUSHJ P,ASKGET
JRST TIMHLP ;JUST A CR
ASKTM1: PUSHJ P,RDTIM## ;GET TIME OF DAY
JRST [PUSHJ P,SVOSET## ;SETUP FOR OUTPUT
PUSHJ P,ERRCRL## ;ISSUE CRLF AND ERROR MESSAGE
PUSHJ P,OPOUT ;FORCE OUTPUT
JRST TIMHLP] ;LOOP BACK AND TRY AGAIN
IDIVI T1,^D60*^D60 ;T1:= HOURS
IDIVI T2,^D60 ;T2:= MINUTES, T3:= SECONDS
MOVEM T1,LOCHOR## ;SAVE HOURS
MOVEM T2,LOCMIN## ;SAVE MINUTES
MOVEM T3,LOCSEC## ;SAVE SECONDS
; PJRST HAVTIM ;GO COMPARE AGAINST LAST CRASH TIME
HAVTIM: MOVE T1,LOCHOR##
MOVE T2,LOCMIN##
IMULI T1,^D60 ;CONVERT TO MINUTES
ADD T1,T2 ;MINUTES SINCE MIDNIGHT
IMUL T1,TICMIN## ;JIFFIES SINCE MIDNIGHT
MOVEM T1,TIME ;TIME=JIFFIES SINCE MIDNIGHT
MOVE T1,LOCSEC## ;SECONDS INTO THIS MINUTE
IMUL T1,TICSEC## ;JIFFIES INTO THIS MINUTE
ADDB T1,TIME## ;TIME=JIFFIES SINCE MIDNIGHT
HRRZ T2,CRSDTM##
SUBI T2,RLDTIM##
IMUL T2,TICSEC##
MOVE T3,THSDAT##
CAMGE T1,T2
CAME T3,CRSDAY
JRST HAVTI1
IFE FTDTCK,<
MOVEI T1,[ASCIZ /
%Specified time is prior to last crash.
Specified time: /]
PUSHJ P,ICONM
PUSHJ P,PRDTIM##
MOVEI T1,[ASCIZ /Last crash time: /]
PUSHJ P,CONMES##
>;FTDTCK
IFN FTDTCK,<
MOVEI T1,[ASCIZ /
%Specified time is prior to last crash time.
Crash time: /]
PUSHJ P,ICONM
>;FTDTCK
HRRZ T1,CRSDTM##
SUBI T1,RLDTIM##
IMUL T1,TICSEC##
IFE FTDTCK,<
PUSHJ P,PRTIME##
>;FTDTCK
IFN FTDTCK,<
PUSHJ P,PRTIMS## ;PRINT IT
PUSHJ P,CRLF ;AND CRLF
>;FTDTCK
PUSHJ P,OPOUT
IFN FTDTCK,<
HAVTI1: MOVEI T1,[ASCIZ/Specified time: /]
PUSHJ P,ICONM
MOVE T1,TIME## ;GET TIME
PUSHJ P,PRTIMS## ;PRINT IT
MOVEI T1,[ASCIZ/ (/] ;GET TEXT
PUSHJ P,CONMES## ;TYPE
MOVE T1,TIME## ;GET TIME AGAIN
PUSHJ P,PRAMPM## ;TYPE AS AM/PM
MOVEI T1,[ASCIZ/)/] ;
PUSHJ P,CONMES## ;
PUSHJ P,OPOUT ;
>;FTDTCK
SKIPE FETFLG ;DID DATE/TIME COME FROM FE?
PUSHJ P,RSTDEF ;YES, GIVE OPR TIME TO DISLIKE
MOVEI T1,[ASCIZ /
Is this correct? (Y or N)/]
MOVEI T2,[ASCIZ/YES ;default answer/]
PUSHJ P,YESNOD
JRST DATLP2
IFE FTDTCK,<
HAVTI1: ;IF NO VERIFICATION, CONTINUE HERE
>;FTDTCK
SKIPE FETFLG ;DID DATE/TIME COME FROM FE?
PUSHJ P,RSTDEF ;YES, GIVE OPR TIME TO REPLY AGAIN
SKIPE AGNFLG ;DOING IT AGAIN?
JRST SHORTD ;YES
PUSH P,J ;SAVE ALT-MODE TYPED FLAG
IFN FTKL10,<
PUSHJ P,SPRIPA## ;START THE IPA-20S ON ALL CPUS
>; END IFN FTKL10
;MOVE SYMBOL TABLE UP IN MEMORY
;FIRST FIND THE FIRST LOCATION OF NON-EXISTENT MEMORY
TDZA P2,P2
BYPSY0: TLO P2,400000 ;FOR CALLS TO A SUBROUTINE IN SYSINI
SETZB U,P4
MOVEI P1,CORBLK## ;IN CASE MEMORY HAS NO NON-EXISTANT BANKS
BYPSY1:
IFN FTKL10,<
CONO APR,LP.CSF+LP.NXM ;CLEAR NXM FLAG ON A KL
>
IFN FTKS10,<
WRAPR SP.CSF+SP.NXM
>
BYPSY2: ADDI U,PAGSIZ## ;TRY NEXT 1K BLOCK
SETZB T2,P3
BYPS2A: PUSH P,U
ADDI U,(P3)
PUSHJ P,REFMEM## ;REFERENCE THIS LOCATION
POP P,U
CONSO APR,NXM## ;NON:EXISTANT?
TLOA T2,200000 ;NO, REMEMBER EXISTANT MEMORY SEEN
TLO T2,400000 ;YES, REMEMBER THAT
CAIE P3,MEMITL##-1 ;LOOKED AT ENOUGH WORDS IN THIS PAGE
AOJA P3,BYPS2A ; TO DETECT INTERLEAVING ERROR?
JUMPG T2,BYPS2B ;JUMP IF NO NXM SEEN
TLNN T2,200000 ;NXM, SOME EXISTANT ALSO?
JRST BYPS2C ;NO, NOT AN INTERLEAVING PROBLEM
MOVEI T1,[ASCIZ /?Memory interleaving error
/]
PUSHJ P,ICONM ;TELL THE OPR ABOUT THE PROBLEM
PUSHJ P,OPOUT
STOPCD .,STOP,MIW, ;++MEMORY INTERLEAVING IS WRONG
BYPS2B: SOJG P1,BYPSY2 ;NO, KEEP LOOKING AS LONG AS NOT TOP OF MEMORY
BYPS2C: SKIPN P4 ;FIRST TIME THROUGH?
MOVE P4,U ;YES, REMEMBER LOCATION OF LOWEST NON-EX MEM
SOJL P1,BYPSY4 ;ACCOUNT FOR MISSED SOJ AND SEE IF FINISHED
MOVE P3,U ;NOW SEE IF ANY MEMORY EXISTS HIGHER UP
BYPSY3: ;CLEAR THE NON-EX-MEM FLAG
IFN FTKL10,<
CONO APR,LP.CSF+LP.NXM
>
IFN FTKS10,<
WRAPR SP.CSF+SP.NXM
>
ADDI P3,PAGSIZ## ;TRY NEXT 1K BLOCK
PUSH P,U ;SAVE U
MOVE U,P3 ;SET ARG FOR REFMEM
PUSHJ P,REFMEM## ;REFERENCE IT
POP P,U ;RESTORE U
CONSZ APR,NXM## ;IS IT THERE?
SOJG P1,BYPSY3 ;NO, LOOP THROUGH ALL 256K
SOJLE P1,BYPSY4 ;JUMP IF NO MORE EXISTANT MEMORY
PUSHJ P,MEMBAD ;TELL THE OPERATOR HE HAS HOLES IN MEMORY
JRST BYPSY0 ;HE SAID HE FIXED IT. GO SEE IF HE DID.
JFCL ;OFF-LINE
MOVE U,P3 ;HE SAID ITS BROKEN
JRST BYPSY1 ;GO SEE IF THERE ARE ANY MORE HOLES
BYPSY4: SKIPL DEBUGF## ;SYS PROG DEBUGGING MONITOR?
; NOTE - ALREADY TOLD HIM IF HOLE IN MIDDLE
;PATCH TO NO. OF WORDS OF CORE TO BE CHECKED FOR ALL-ON-LINE
PATNWC::CAML U,NWCORE## ;NOW SEE IF THERE IS AT LEAST AS MUCH MEMORY AS THERE
; WAS AT MONGEN TIME
JRST BYPSY5 ;THERE IS SO NO REASON TO COMPLAIN
MOVE P3,NWCORE## ;REMIND HIM OF HOW MUCH MEMORY HE HAD AT MONGEN TIME
PUSHJ P,MEMBAD ;TELL THE OPERATOR THERE'S NOT THAT MUCH THERE
JRST BYPSY0 ;HE SAID HE FIXED IT. SEE IF HE REALLY DID.
MOVEM U,NWCORE## ;HE SAID DOWN, DON'T ALLOCATE EXTRA CORE FOR
; PAGTAB AND MEMTAB
;OK, HE'S WILLING TO BRING IT UP WITHOUT ALL THE MEMORY ON LINE (LET'S HOPE ITS DOWN)
BYPSY5: CAMG U,[XWD 1,0] ;MORE THAN 256K?
SETZ U, ;NO
MOVEM U,FLG256## ;SET GTR THAN 256K FLAG
SKIPE P2 ;IF WE COMPLAINED,
PUSHJ P,SUNXMT
STO2: JSR JRSTI1 ;SETUP LOCS 40 THRU 61 & TEST FOR 2 RELOC. HARDWARE
MOVE T1,[JRST LOADMS] ;ONLY MOVE SYMBOLS ONCE
MOVEM T1,BYPSY5
LOADMS:
SETOM PRESSL ;INIT PRESERVED SSL FLAG
SETOM PREASL ;INIT PRESERVED ASL FLAG
SETOM PRESDL ;INIT PRESERVED SDL FLAG
IFN FTMP,<PUSHJ P,ONCCPU##> ;SEE IF ALL CPU(S) ARE RUNNING
IFN FTCIDSK,<
MOVE T1,TIME## ;STORE TIME STAMP
MOVEM T1,BNDBEG##
CONO PI,PI.ON+DSKPIN## ;MAKE SURE DISK PI CHANNEL IS ON
>; END IFN FTCIDSK
SKIPGE (P) ;SKIP IF ALTMODE TERMINATED DATE
JRST LONGD ;DO THE LONG DIALOGUE IF THE LAST LINE
; TYPED IN (NAMELY TIME OF DAY) WAS TERMINATED BY
; AN "ALT MODE". (PUSH-DOWN LIST IS SET UP
; IN THE "GETLIN" SUBROUTINE CALLED ABOVE.)
;TYPING ESCAPE DURING ONCE WILL BRING YOU BACK HERE TO TRY AGAIN.
SHORTD::SETZB P1,SHUTUP## ;CLEAR SHORT FLAG
SETOM FSTTIM ;FLAG NOT TO CREATE SABS, ETC.
SETOM OPTQIK##
SETOM OFFLOK## ;NO VERBOSITY
SKIPL DEBUGF##
JRST SHORT1 ;NOT DEBUGGING
IFN FTCIDSK,<
PUSHJ P,ONCBND## ;BIND CI DISKS
>; END IFN FTCIDSK
JRST QUICK
SHORT1: SETZM ERROK## ;TYPE REAL ERRORS
MOVEI T1,[ASCIZ/
Startup option: /]
MOVEI T2,[ASCIZ /QUICK ;Default/]
PUSHJ P,ASKDEF ;ASK QUESTION
JRST ONCHLP ;GIVE SOME HELP
;DONE HERE BECAUSE WE COULD HAVE RUSHED THRU THE OTHER QUESTIONS
HRRZ T1,CRSSTS## ;STATES BEFORE THE RELOAD
TRO T1,ST.NOP ;ASSUME NO OPR IN ATTENDANCE
SKIPGE DEFALW ;DID THE OPR ANSWER?
HRRM T1,STATES## ;NO, STORE STATES AS PREVIOUSLY SET BY OPR
PUSHJ P,CTEXT## ;GET FIRST WORD
SWTEST: CAIE T3,"/" ;SWITCH COMING?
JRST LNG1 ;NO, CHECK OPTION
PUSH P,T2 ;SAVE OPTION
PUSHJ P,CTEXT## ;PICK UP SWITCH NAME
MOVE T1,[-SWTLEN,,SWTTAB]
PUSHJ P,FNDNAM## ;LOOKUP NAME
JRST ONCHLS ;GIVE SOME HELP
MOVSI T2,(ST%ACV) ;LOAD SOME BITS TO TWIDDLE
MOVEI T3,ST.NRT
MOVSI T4,(ST%NPP)
XCT SWTXCT(T1) ;ACT ON THE SWITCH
MOVE T3,ONCTCH ;FETCH (POSSIBLY NEW) DELIMETER
POP P,T2 ;RESTORE OPTION NAME
JRST SWTEST ;SEE IF ANOTHER SWITCH COMING
LNG1: MOVE T1,[-OPTLEN,,OPTTAB]
PUSHJ P,FNDNAM## ;LOOKUP NAME
JRST ONCHLP ;GIVE SOME HELP
IFN FTCIDSK,<
PUSHJ P,ONCBND## ;BIND ALL UNATTACHED UNITS TO ALL CPUS
>
XCT OPTXCT(T1) ;DO YOUR THING
JRST SHORTD
;DONE BY XCT ABOVE
OPTXCT: PUSHJ P,SHRTPM## ;CHANGE
PUSHJ P,SHRTST## ;DESTROY
JRST QUICK ;GO
PUSHJ P,FILOPL## ;LONG
JRST PVQCK ;QUICK
JRST QUICKN ;NOINITIA
PUSHJ P,SHRTRF## ;REFRESH
PUSHJ P,SHRTID## ;UNITID
SWTXCT: JRST LNGHLP ;/HELP
SETZM OFFLOK## ;/OFFLINE
SETOM ERROK## ;/NOERROR
IORM T3,STATES## ;/STAND
SETZM OPTQIK ;/ASK
ANDCAM T2,CNFST2## ;/NOVALIDATE
IFN FTKL10,<
IORM T4,CNFST2## ;/NOPRIMARY
>
PUSHJ P,NOCOPY ;/NOCOPY
IFN FTKL10,<
PUSHJ P,NODXLD ;/NODXLD
>
SETZM PRESSL ;/NOSSL
SETZM PREASL ;/NOASL
SETZM PRESDL ;/NOSDL
IFN FTKL10&FTAUTC,<
PUSHJ P,NOCI ;/NOCI
>; END IFN FTKL10&FTAUTC
IFN FTSETS,<
PUSHJ P,SETS ;/SETS
>; END IFN FTSETS
JRST DATAGN ;/DATE
NOCOPY: MOVSI T1,(DF.DCC) ;DISABLE INVOCATION OF
IORM T1,DEBUGF## ; CRSCPY AT STARTUP
POPJ P, ;RETURN
IFN FTKL10,<
NODXLD: MOVEI T1,[SETOM .CPNLD##-.CPCDB##(P1) ;SUBROUTINE TO CALL
POPJ P,]
PJRST CPUAPP## ;DISABLE LOADING ON ALL CPUS
>
IFN FTKL10&FTAUTC,<
NOCI: MOVSI T1,770000 ;ASSUME NO ARGUMENT TO FOLLOW
MOVE T3,ONCTCH ;GET BREAK CHARACTER
CAIE T3,":" ;ARGUMENT? (CPU NUMBER)
JRST NOCI1 ;NOPE, THEY WANTED ALL
PUSHJ P,DECIN## ;READ RESPONSE
JRST NOCIE ;BAD RESPONSE
JRST NOCIE ;BAD RESPONSE
SKIPL T2 ;CHECK FOR VALIDITY
CAIL T2,CPUN## ;...
JRST NOCIE ;ERROR
MOVE T1,BITTBL##(T2) ;GET BIT FOR THIS CPU
NOCI1: IORM T1,IPAMSK## ;REMEMBER FOR KLPSER/KNISER
POPJ P, ;RETURN
NOCIE: MOVEI T1,[ASCIZ /
?Invalid response
/]
PUSHJ P,ICONM ;START THE MESSAGE
PUSHJ P,OPOUT ;FORCE IT OUT
ADJSP P,-1 ;TOSS RETURN TO SWTEST
JRST ONCHLS ;GET SOME HELP
>; END IFN FTKL10&FTAUTC
IFN FTSETS,<
SETS: SETZ P1, ;GET A ZERO INITIALLY (ALL SETS)
MOVEI T1,[ASCIZ /Type the desired disk set numbers to be mounted
(Extra <CR> when done)
/]
PUSHJ P,ICONM ;START THE MESSAGE
PUSHJ P,OPOUT ;FORCE IT OUT
SETS1: PUSHJ P,GETLIN ;GET OPERATOR'S RESPONSE
JRST SETS2 ;DONE
PUSHJ P,DECIN## ;READ RESPONSE
JRST SETS3 ;BAD RESPONSE
JRST SETS3 ;BAD RESPONSE
CAIL T2,^D1 ;IN RANGE OF 1
CAILE T2,^D36 ; TO 36?
JRST SETS3 ;NO
IOR P1,BITTBL##-1(T2) ;INCLUDE BIT FOR THIS SET NUMBER
JRST SETS1 ;ASK AGAIN
SETS2: MOVEM P1,DSKSET## ;STORE NEW VALUE
POPJ P, ;RETURN
SETS3: MOVEI T1,[ASCIZ /Bad response, try again
/]
PUSHJ P,ICONM ;START THE MESSAGE
PUSHJ P,OPOUT ;FORCE IT OUT
JRST SETS1 ;ASK AGAIN
>; END IFN FTSETS
;SHORT HELP
ONCHLP: ADJSP P,1 ;MATCH PUSH FROM OTHER PATHS
ONCHLS: MOVEI T1,[ASCIZ "
CHANGE,DESTROY,GO,LONG,QUICK,NOINITIA,REFRESH,UNITID
/H for help
"]
JRST ONCHL1 ;TYPE THAT OUT
LNGMSG: ASCIZ "
CHANGE - Change disk parameters.
DESTROY - Rebuild all disks. Deletes all files, sets all defaults.
GO - Start the system if all is OK.
LONG - Enters long dialogue.
QUICK - Same as GO.
NOINITIA - GO, but don't bring up OPSER, etc.
REFRESH - Refresh selected structures.
UNITID - Change unit IDs.
Switches typed after option are:
/HELP - Type this text.
/OFFLINE - Tell operator about off-line units.
/NOERROR - Don't tell about non-serious errors.
/STAND - Set SCHED 10.
/ASK - Ask about off-line units.
/NOVALIDATE - Don't require project validation.
/NOPRIMARY - Come up in secondary protocol.
/NOCOPY - Don't start CRSCPY.
/NODXLD - Don't auto reload DX20s.
/NOSSL - Don't use preserved system search list.
/NOASL - Don't use preserved active swapping list.
/NOSDL - Don't use preserved system dump list.
/NOCI - Don't start CI20s.
/SETS - Ask which disk set numbers to mount.
"
;/DATE - Ask for date and time again.
IFNDEF BUFLEN,<BUFLEN==.-LNGMSG>
IFL BUFLEN-<.-LNGMSG>,<BUFLEN==.-LNGMSG>
LNGHLP: MOVEI T1,LNGMSG
ONCHL1: ADJSP P,-1 ;FIX STACK
PUSHJ P,ICONM
PUSHJ P,OPOUT
JRST SHORTD
OPTTAB: SIXBIT /CHANGE/
SIXBIT /DESTRO/
SIXBIT /GO/
SIXBIT /LONG/
SIXBIT /QUICK/
SIXBIT /NOINIT/
SIXBIT /REFRES/
SIXBIT /UNITID/
OPTLEN==.-OPTTAB
SWTTAB: SIXBIT /HELP/
SIXBIT /OFF/
SIXBIT /NOERRO/
SIXBIT /STAND/
SIXBIT /ASK/
SIXBIT /NOVALI/
IFN FTKL10,<
SIXBIT /NOPRIM/
>
SIXBIT /NOCOPY/
IFN FTKL10,<
SIXBIT /NODXLD/
>
SIXBIT /NOSSL/
SIXBIT /NOASL/
SIXBIT /NOSDL/
IFN FTKL10&FTAUTC,<
SIXBIT /NOCI/
>; END IFN FTKL10&FTAUTC
IFN FTSETS,<
SIXBIT /SETS/
>; END IFN FTSETS
SIXBIT /DATE/
SWTLEN==.-SWTTAB
;THE LONG DIALOGUE BEGINNETH HERE.....
LONGD: SETOM (P) ;SET "ALTMOD"-TYPED FLAG
IFN FTCIDSK,<
PUSHJ P,ONCBND## ;BIND ALL UNATTACHED UNITS TO ALL CPUS
>
PUSHJ P,FILOPT## ;GO THROUGH THE REFRESH DIALOGUE(S) [LEVEL C]
; TYPE STATE OF WHOLE DISK SYSTEM, THEN
; ACCEPT CHANGES TO UNITS AND STR'S & REFRESH [LEVEL D]
;FIND CORE TO BE USED FOR MULTIPLE DEVICE DATA BLOCKS
; INCLUDING DISK
;GO, BUT NO INITIA
QUICKN:
MOVEI T1,TTFCXI## ;INDEX OF INITIA
SETZM TTFCOM##(T1) ;CLEAR ENTRY FROM FORCED COMMAND TABLE
;AND FALL INTO QUICK
PVQCK::
QUICK: ;THIS IS THE SHORT-CUT EXIT TO BY-PASS MOST OF THE DIALOGUE.
SKIPN HICORE## ;HICORE BEEN UPDATED?
PUSHJ P,REDHOM## ;NO, DO SO NOW
JFCL
PUSH P,SYSSIZ## ;SAVE CURRENT SIZE
JSP T1,CNTDB## ;UPDATE SYSSIZ BY SPACE USED
; FOR DEVICE DATA BLOCKS FOR DSK,DTA,MTA,TTY,PTY)
POP P,T1 ;POP OFF CURRENT SYSTEM SIZE
EXCH T1,(P) ;EXCH WITH ALTMODE TYPED FLAG
JUMPGE T1,QUICK1 ;JUMP IF QUICK DIALOGUE - DONT TYPE MONITOR SIZE
;PRINT OCTAL SIZE OF MONITOR
MOVEI T1,[ASCIZ /
Exec is /]
PUSHJ P,ICONM
MOVE T1,SYSSIZ##
PUSHJ P,OCTPNT##
MOVEI T1,[ASCIZ / octal locations long.
/]
PUSHJ P,CONMES##
PUSHJ P,CRLF##
PUSHJ P,OPOUT
QUICK1: ;THIS IS THE SHORT-CUT EXIT TO BY-PASS MOST OF THE DIALOGUE.
POP P,SYSSIZ## ;RESTORE SYSSIZ PRIOR TO ACTUAL CREATION
; OF DEVICE DATA BLOCKS
JRST @ONCE ;***EXIT FROM THE "ONCE-ONLY CODE"***...........
JRSTI1: 0
;SET LOC TWOREG TO -1 IF MACHINE HAS TWO RELOC REG, TO 0 IF ONLY ONE RELOC REG
MOVE P3,.CPMAP##
PUSH P,.EUPMP/PAGSIZ##(P3)
IFN FTKL10,<
SKIPE [CPUN##-1] ;IF MORE THAN 1 CPU,
SKIPA T1,[JRST SYSTOP##] ;LET WARM RESTART=J407
MOVE T1,[JRST APRWRS##] ;WARM RESTART INSTRUCTION
MOVEM T1,WRSINS## ;STORE IN WARM RESTART LOCATION
>
IFN FTMP,<
MOVE T1,[JRST APRRES##] ;POWER FAIL-AUTO-RESTART INSTR.
>
IFE FTMP,<
MOVE T1,[HALT APRRES##] ;HALT IF NOTHING SAVED
>
MOVEM T1,ARSLOC## ;STORE IN AUTO-RESTART LOCATION
MOVE T1,[XPCW @.CPKAF##]
MOVEM T1,KAFLOC## ;STORE IT IN RIGHT SPOT
MOVSI T1,(<PM.DCD>B2+PM.WRT)
MOVEM T1,.EUPMP/PAGSIZ##(P3)
CLRPGT (0) ;CLEAR PAGING MEMORY AFTER CHANGING THE MAP
MOVEI 17,.EUPMP ;MOVE HARDWARE AC'S INTO SHADOW AC'S TO CLEAR PARITY
;IF HARDWARE AC'S TURNED OFF, AC'S WILL BE PRESERVED
BLT 17,.EUPMP+17 ;STOP WITH SHADOW AC 17
SETZ T2, ;ZERO AC T2
SETOM .EUPMP+T2 ;SET SHADOW AC T2
CONO PI,10000 ;CLEAR PI SYSTEM
MOVE P3,.CPMAP##
POP P,.EUPMP/PAGSIZ##(P3)
CLRPGT (0) ;CLEAR PAGING MEMORY AFTER CHANGING THE MAP
IFE FTKL10,<
;SETUP LOCATIONS 40 THRU 61
MOVE T1,[XWD LOC40,.EPIL##] ;SETUP LOWER CORE PI LOCATIONS
BLT T1,.EPIL##+LOC40E-1
>
;LINK DEVICE SERVICE ROUTINES TOGETHER
SKIPE DEVLST## ;HAVE SERVICE ROUTINES BEEN CHAINED TOGETHER YET ?
JRST @JRSTI1 ;YES, MUST HAVE BEEN LOADED WITH BUILD
MOVSI T1,INTNUM## ;NO, NEGATIVE NUMBER OF SERVICE ROUTINES*2
INTLOP: LDB U,PINTCH## ;GET NEXT PI NUMBER
LDB J,DDBNUM## ;NUMBER OF DDBS
JUMPN J,NTLVDD ;JUMP IF NOT LEVEL D DISK
HRRZ J,INTTB1##(T1) ;ADDRESS OF DDB
JUMPE J,NTLVDD ;JUMP IF REALLY NO DDBS
HLRZ J,(J) ;IS LEVEL D DISK, GET LH OF DEVICE NAME
CAIE J,(SIXBIT .DSK.) ;SKIP IF IS REALLY A DISK
JRST NTLVDD ;NO
MOVNI J,KONINT## ;YES, GET OFFSET FOR INTERRUP LOCS
ADD J,INTTAB##(T1) ;PLUS INTERRUPT LOC=KONT DB
DPB U,KOYPI## ;STORE PI CHANNEL
IFN FTAUTC,<
JRST NOPICH ;AUTCON WILL SET UP NEEDED INTERRUPT CHAINS
>
NTLVDD: LSH U,1 ;SHIFT LEFT ONE SO MATCH PI LOCATIONS
JUMPE U,NOPICH ;DOES THIS DEVICE HAVE A PI CHANNEL (PTY) ?
LDB J,PINTCP##
LSH J,.CPSOF##
MOVE J,.C0EPT##(J)
ADDI J,(U)
MOVE J,.EPIL##-.EPMP##(J)
ADDI J,3
INTLP1: MOVE U,J ;SAVE IT IN U (EITHER A JRST DEV'INT OR
; JEN @CH'N
MOVE J,1(U) ;PICK UP INSTR. FOLLOWING INTERRUPT CONSO
TLNN J,000740 ;IS IT A JEN ?
JRST INTLP1 ;NO, KEEP LOOKING
HRRZ T2,INTTAB(T1) ;YES, LAST DEVICE SO FAR, GET DEV'NT
IFN FTAUTC,<
CAIE T2,MT0INT## ;AUTCON WILL DO IT
>
SKIPN (T2) ;DEV'INT=0?
JRST NOPICH ;YES, MUST BE VECTORRED INTERRUPT DEVICE
HRLI T2,(JRST) ;MAKE JRST INSTR.
MOVEM T2,1(U) ;CHANGE JEN @CH'N TO JRST DEV'NT
MOVEM J,1(T2) ;MAKE DEV'NT+1 BE JEN @CH'N
NOPICH: AOBJN T1,.+1 ;PICKUP EVERY OTHER WORD
AOBJN T1,INTLOP ;ANY MORE INTERRUPT SERVICE ROUTINES ?
JRST @JRSTI1 ;NO, EXIT
IFE FTKL10,<
LOC40: 0 ;UUO PC
UUOTRP::JSR LUUOPC## ;TO UUO HANDLER
XPCW CH1##
JSR PIERR##
XPCW CH2##
JSR PIERR##
XPCW CH3##
JSR PIERR##
XPCW CH4##
JSR PIERR##
XPCW CH5##
JSR PIERR##
XPCW CH6##
JSR PIERR##
XPCW CH7##
JSR PIERR##
LOC40E==.-LOC40
>
;ROUTINE TO READ A LINE FROM OPERATORS CONSOLE
;CALL: PUSHJ P,GETLIN
; JUST A CR TYPED IN
; NORMAL RETURN (NOT A BLANK LINE)
GETLIN::HRLOI T1,377777 ;DO NOT ALLOW A DEFAULT
MOVEM T1,DEFLAG ;STORE FLAG
GETLI0: MOVE T1,LINEP
MOVEM T1,ONCTIP ;INITIAL STORAGE POINTER
MOVEI T3,40 ;PRIME COMMAND ROUTINES WITH A SPACE
MOVEM T3,ONCTCH ; ..
MOVEI J,0 ;FLAG NO ALTMODE SEEN, ZERO CHARACTER COUNT (RH
; OF J), CLEAR DELETE FLAG (LH OF J)
GET1: PUSHJ P,XTYI ;WAIT FOR A CHARACTER
SKIPGE DEFLAG ;NEED A DEFAULT?
ILDB T3,DEFPTR ;YES--GET BYTE
SKIPL DEFLAG ;NEED A DEFAULT?
MOVE T3,FROMFE ;GET CHAR FROM WHERE IT WAS SAVED
ANDI T3,177 ;STRIP PARITY
CAIE T3,"H"-100 ;BACKSPACE?
CAIN T3,177 ;RUBOUT?
JRST DELETE ;YES
TLZE J,1
PUSHJ P,BKSLSH ;TERMINAL BACKSLASH IF WE HAD BEEN DELETING
CAIN T3,"R"-100 ;CONTROL-R?
JRST RETYPE ;YES
CAIN T3,"U"-100 ;CONTROL-U?
JRST CNTRLU ;YES
CAIE T3,"$" ;ACCEPT DOLLAR-SIGN AS AN ALT-MODE
CAIN T3,33 ;ALTMODE/ESCAPE?
JRST GETLN1 ;YES
CAIE T3,175 ;OTHER ALTS?
CAIN T3,176 ; ..
JRST GETLN1 ;YES
GET2: PUSHJ P,XTYO ;ECHO
CAIL T3,140 ;LOWER CASE?
TRZ T3,40 ;YES. MAKE UPPER
IDPB T3,T1 ;STORE IN INPUT BUFFER
CAIE T3,15 ;CAR RET?
AOJA J,GET1 ;NO. LOOP TILL BREAK
MOVEI T3,12 ;YES. ADD LF
PUSHJ P,XTYO ;OUTPUT LF
MOVEI T3,0 ;TERMINATE INPUT STRING IN BUFFER
IDPB T3,T1 ; ..
JUMPN J,CPOPJ1 ;IF NON-NULL LINE, SKIP RET
POPJ P,0 ;NULL. NON-SKIP RET
DELETE: TRNN J,-1 ;AT BEGINNING OF LINE ?
JRST DELET1 ;YES
TLON J,1 ;SET DELETE FLAG
PUSHJ P,BKSLSH ;TYPE BACKSLASH IF JUST STARTING TO DELETE
LDB T3,T1 ;GET PREVIOUS CHARACTER
PUSHJ P,XTYO ;ECHO IT AS WE DELETE IT
ADD T1,[XWD 070000,0] ;BACK UP BYTE POINTER
TLNE T1,400000 ;FINISHED THIS WORD YET ?
ADD T1,[XWD 347777,-1] ;YES, BACK UP ADDRESS
SOJA J,GET1
DELET1: TLZE J,1
PUSHJ P,BKSLSH ;TERMINAL BACKSLASH IF DELETED ANY CHARS
DELET2: MOVEI T3,15
PUSHJ P,XTYO
MOVEI T3,12
PUSHJ P,XTYO
JRST GETLIN
CNTRLU: MOVEI T3,"^" ;TYPE UP ARROW
PUSHJ P,XTYO
MOVEI T3,"U" ;TYPE U
PUSHJ P,XTYO
JRST DELET2 ;FINISH UP
BKSLSH: PUSH P,T3
MOVEI T3,134 ;TYPE BACKSLASH
PUSHJ P,XTYO
POP P,T3
POPJ P,0
GETLN1: MOVEI T3,"$" ;OUTPUT DOLLAR SIGN IF ALT-MODE TYPED
PUSHJ P,XTYO
HRROS J ;MECHANISM USED TO BY-PASS PART OF DIALOGUE
MOVEI T3,15 ; WHEN ALTMODE IS TYPED (J NEGATIVE ON
JRST GET2 ; RETURN FROM GETLIN).
RETYPE: MOVEI T3,15 ;CARRIAGE RETURN
PUSHJ P,XTYO
MOVEI T3,12 ;LINE FEED
PUSHJ P,XTYO
PUSH P,T1 ;SAVE THE BYTE POINTER
SETZ T3, ;GET A ZERO
IDPB T3,T1 ;MAKE ASCIZ
MOVE T1,LINEP ;GET VIRGIN BYTE POINTER TO INPUT LINE
RETYP1: ILDB T3,T1 ;GET A CHARACTER
JUMPE T3,RETYP2 ;DONE AT NULL
PUSHJ P,XTYO ;TYPE IT
JRST RETYP1 ;LOOP
RETYP2: POP P,T1 ;RESTORE BYTE POINTER
JRST GET1 ;GET NEXT CHARACTER
;ROUTINE TO TYPE A LINE ON OPERATOR CONSOLE
;ECHO CHECK STOPS LINE AND RETURNS
;CALL: ONCTOP SET TO END OF MESSAGE
;CALL OPOUTX FOR MESSAGE CONTINUATIONS TO BE SUPPRESSED IF
; THE PREVIOUS PART OF THE MESSAGE WAS ^O'D
OPOUTX::SKIPE CNTRLO ;^O IN EFFECT ?
PJRST OTSET ;YES, JUST CLEAR BUFFER AND GO AWAY
OPOUT:: SETZM CNTRLO ;CLEAR ^O FLAG
MOVEI T3,0 ;MAKE SURE STRING ENDS
IDPB T3,ONCTOP ;WITH A NULL
MOVE T1,LINEP ;AND RESTART AT BEGINNING
MOVEM T1,ONCTOP ; ..
IFN FTKL10,<
OPOUT1: PUSHJ P,SPCGTI## ;WAIT FOR INPUT, SKIP WITH CHAR IN T3
JRST .+2 ;NOT READY YET
JRST OPOUT2 ;YES
>
IFN FTKS10,<
OPOUT1: SKIPN T3,CTYIWD ;SKIP IF CHAR IS THERE
JRST .+3 ;NONE THERE
SETZM CTYIWD ;CLEAR CTYIWD
JRST OPOUT2 ;GO DO CTRL-O
>
ILDB T3,ONCTOP ;GET CHAR TO TYPE
JUMPE T3,CPOPJ ;QUIT ON NULL
PUSHJ P,XTYO ;TYPE CHAR
JRST OPOUT1 ;LOOP
;HERE WHEN KEY STRUCK DURING TYPEOUT
OPOUT2: SETOM CNTRLO ;SET ^O FLAG
MOVEI T3,"^"
PUSHJ P,XTYO
MOVEI T3,"O"
PUSHJ P,XTYO
MOVEI T3,15
PUSHJ P,XTYO ;TYPE OUT CRLF
MOVEI T3,12
PUSHJ P,XTYO
JRST OTSET ;RESET OUTPUT BUFFER, RETURN FROM OPOUT
CNTRLO: 0 ;SUPPRESS TYPE-OUT WHEN -1
XTYO: CAIL T3," " ;CONTROL CHARACTER?
JRST XTYOCH ;NO
CAIN T3,15 ;CARRIAGE RETURN?
SETZM ONCCOL ;YES, BACK AT BEGINNING OF LINE
CAIE T3,11 ;TAB?
JRST XTYOCN ;NO, DON'T COUNT WIDTH OF CONTROL CHARACTERS
PUSH P,T3 ;SAVE ORIGINAL CHARACTER
MOVE T3,ONCCOL ;GET COLUMN
ADDI T3,^D8 ;GET TO NEXT TAB STOP
TRZ T3,7 ;...
SUB T3,ONCCOL ;FIND NUMBER OF SPACES NEEDED
PUSH P,T3 ;SAVE COUNT
MOVEI T3," " ;GET A SPACE
PUSHJ P,XTYOCH ;OUTPUT IT
SOSLE (P) ;NEED ANY MORE?
JRST .-2 ;YES, DO ANOTHER
ADJSP P,-1 ;TOSS THE COUNT
POP P,T3 ;RESTORE ORIGINAL TAB
POPJ P, ;RETURN
XTYOCH: AOS ONCCOL ;INCREMENT COLUMN COUNT
XTYOCN: PUSHJ P,PEVEN8## ;GET GOOD PARITY FOR CHAR
IFN FTKL10,<
PUSHJ P,SPCTYO## ;TYPE OUT
PUSHJ P,OPRFIL## ;DO FILLERS
XTYO1: PUSHJ P,APRCHK ;UPDATE TIME
PUSHJ P,SPCWTO## ;WAIT FOR OUTPUT DONE
JRST XTYO1 ;NOT DONE, WAIT SOME MORE
>
IFN FTKS10,<
PUSHJ P,APRCHK ;UPDATE TIME
SKIPE CTYOWD ;CAN WE TYPE YET?
JRST .-2 ;NO, WAIT
TRO T3,CTYOVL ;SET VALID FLAG
MOVEM T3,CTYOWD ;PUT IT IN 8080'S WORD
WRAPR SP.SSF+SP.IFE ;INTERRUPT THE 8080
PUSHJ P,APRCHK ;UPDATE TIME
SKIPE CTYOWD ;CHAR TAKEN YET?
JRST .-2 ;NO, WAIT
>
ANDI T3,177 ;ONLY CHAR FOR COMPARES IN GETLIN
POPJ P, ;RETURN
ONCCOL: 0 ;COLUMN NUMBER FOR TAB SIMULATION
;WAIT TIL INPUT DONE ON BEFORE RETURNING WITH NEXT CHAR.
XTYI: PUSH P,T1 ;SAVE AN AC
XTYI1: PUSHJ P,APRCHK
SKIPGE DEFLAG
JRST XTYI2
IFN FTKL10,<
PUSHJ P,SPCGTI## ;SKIP IF CHAR PRESENT, WITH IT IN T3
>
IFN FTKS10,<
SKIPN T3,CTYIWD ;SKIP IF CHAR PRESENT, WITH IT IN T3
>
JRST XTYI1
IFN FTKS10,<
SETZM CTYIWD ;CLEAR FOR NEXT TIME
>; END IFN FTKS10
MOVEM T3,FROMFE ;SAVE CHARACTER FOR USE LATER
HRLOI T1,777 ;RESET THE TIMER
MOVEM T1,DEFLAG ; SO WE DON'T START UP
MOVEM T1,OPRCNT
SETZM DEFALW
JRST TPOPJ## ;RETURN AND RESTORE T1
XTYI2: SETOM DEFALW
JRST TPOPJ##
ONCKLT::BLOCK 1 ;PLACE TO KEEP BITS FOR KL10 INTERVAL TIMER
FROMFE: BLOCK 1 ;PLACE TO KEEP CHAR AFTER XTYO GETS IT
;CHECK APR FOR CLOCK FLAG SO TIME USER TYPES IN WILL BE ACCURATE
APRCHK::
IFN FTKL10,<
CONSO TIM,TI.ITD ;TIMER ON KL10 FINISHED WITH ITS TICK?
>
IFN FTKS10,<
CONSO APR,SP.ITI
>
POPJ P, ;NO
IFN FTMP,<
PUSH P,T1
MOVEI T1,.C0CDB## ;INCREMENT .CPOK FOR ALL CPUS
APRCH1: AOS .CPOK##-.CPCDB##(T1)
HLRZ T1,.CPCDB##-.CPCDB##(T1) ;STEP TO NEXT CPU
JUMPN T1,APRCH1
POP P,T1
>
IFN FTKL10,<
CONO TIM,@ONCKLT ;YES, CLEAR INTERNAL TIMER DONE AND START UP AGAIN
>
IFN FTKS10,<
WRAPR SP.CSF!SP.ITI
>
AOS TIME## ;INCREMENT TIME
SOS DEFLAG ;SEE IF TIME FOR DEFAULT
IFN FTSCA,<
PUSHJ P,SAVT## ;SAD BUT NEEDED
PUSHJ P,SC.TIC## ;DO ONCE/TICK SCA MEMORY ALLOCATION
PUSHJ P,PPDTIC## ;DITTO FOR THE KLIPA
>; END IFN FTSCA
POPJ P,
;ONCTIV ONCE TTY INPUT VECTOR.
ONCTIV::PUSHJ P,ONCTYI ;(0 = CTIGNC) GET NEXT CHAR
MOVE T3,ONCTCH ;(1 = CTIGLC) GET LAST CHAR
MOVEM T3,ONCTCH ;(2 = CTISLC) SET LAST CHAR
MOVE T1,ONCTIP ;(3 = CTIGBP) GET BYTE POINTER
MOVEM T1,ONCTIP ;(4 = CTISBP) SET BYTE POINTER
;HERE TO READ THE NEXT CHAR FOR COMCON.
ONCTYI: ILDB T3,ONCTIP ;GET INPUT CHARACTER
MOVEM T3,ONCTCH ;STORE FOR RE-READS
POPJ P,0 ;AND RETURN TO CALLING ROUTINE
ONCTYO: SOSLE ONCCNT ;COUNT CHARACTERS
IDPB T3,ONCTOP ;PUT IN BUFFER
POPJ P,0 ;AND RETURN
ICONM:: SETTYO ;INITIALIZE LINE BUFFER
JRST CONMES## ;OUTPUT MESSAGE
OTSET:: MOVEI T3,ONCTSZ ;SIZE OF BUFFER
MOVEM T3,ONCCNT ;SO CANT OVERFLOW
MOVEI T3,ONCTIV ;ADDRESS FOR READ ROUTINES TO USE
MOVEM T3,.CPTIV## ; ..
MOVEI T3,ONCTYO ;ADDRESS FOR TYPEOUT ROUTINES TO GO TO
MOVEM T3,.CPTOA## ; ..
MOVE T3,LINEP ;INITIAL OUTPUT POINTER
MOVEM T3,ONCTOP
POPJ P,0
YESNOD: PUSHJ P,ASKDEF ;ASK THE QUESTION
POPJ P, ;JUST <CR>
JRST YESN ;AND CHECK FOR 'YES'
YESNO:: PUSHJ P,ASKGET ;ASK QUESTION, GET ANSWER
POPJ P,0 ;JUST C-R
YESN: PUSHJ P,ALTM##
NEXTC
TRZ T3,40 ;FIRST CHAR OF RESPONSE (U.C.)
CAIN T3,"Y" ;WAS IT A Y ?
AOS 0(P) ;YES. SKIP
POPJ P, ;NO, MAYBE IT WAS "N". SO DON'T SKIP
ASKGET: PUSHJ P,ICONM ;OUTPUT THE QUESTION
PUSHJ P,OPOUT
PJRST GETLIN ;GET ANSWER
PPNERR: MOVEI T1,[ASCIZ \Bad [P,PN] typed try again: \]
GTPPN:: PUSHJ P,ASKGET ;ASK QUESTION, GET ANSWER
POPJ P,
PUSHJ P,ALTM## ;DID HE TYPE ESC
GTPPN1: NEXTC ;GET THE NEXT CHARACTER
CAIN T3," " ;SPACE
JRST GTPPN1 ;NO, TRY AGAIN
CAIE T3,"[" ;BEGINNING OF PPN
JRST PPNERR ;NO, TRY AGAIN
PUSHJ P,GETOCT ;GET THE FIRST OCTAL NUMBER
JUMPE T2,PPNERR ;NULL PROJECT NUMBER IS BAD
TLNN T2,777777 ;TOO BIG?
CAIE T3,"," ;OR A BAD P,PN SEPARATER
JRST PPNERR ;YEP
PUSH P,T2 ;SAVE IT
PUSHJ P,GETOCT ;GET THE PROGRAMMER NUMBER
POP P,T1 ;GET PROJECT NUMBER BACK
JUMPE T2,PPNERR ;NULL PROGRAMMER NUMBER IS BAD
CAIE T3,"]" ;CHECK FOR LEGAL TERMINATER
CAIN T3,0 ;CRLF IS OK TOO
TLNE T2,777777 ;TOO BIG?
JRST PPNERR ;YEP
HRL T1,T2 ;GET PROGRAMMER NUMBER
MOVSS T1 ;SET IT UP AS [PROJ,PROG]
AOS (P) ;GIVE A SKIP
POPJ P, ;AND RETURN
GETOCT: MOVEI T2,777777 ;ASSUME WILD
NEXTC ;GET FIRST CHARACTER
CAIE T3,"*" ;WILD?
TDZA T2,T2 ;NO - CLEAR RESULT
GETOC1: NEXTC ;NEXT CHAR
CAIL T3,"0" ;IN RANGE?
CAILE T3,"7"
POPJ P,
LSH T2,3 ;CLEAR NULL DIGIT
SUBI T3,"0" ;CONVERT TO BINARY
ADDI T2,(T3) ;ADD TO TOTAL
JRST GETOC1 ;LOOP UNTIL DONE
IFN FTSETS,<
GETSE0: MOVEI T1,[ASCIZ |Bad response, try again
|]
GETSET::PUSHJ P,ASKGET ;ASK QUESTION, GET RESPONSE
POPJ P, ;<CR> TYPED
PUSHJ P,ALTM## ;ALLOW ALTMODE COP-OUT
PUSHJ P,CTIGBP## ;GET BYTE POINTER
MOVE P1,T1 ;SAVE IT
PUSHJ P,DECIN## ;TRY TO READ A NUMBER
JRST GETSE1 ;BAD RESPONSE, MAYBE "ALL"
JRST GETSE1 ;DITTO
CAIL T2,^D1 ;IN LEGAL RANGE?
CAILE T2,^D36 ;...
JRST GETSE0 ;NO, COMPLAIN AND ASK AGAIN
MOVE T1,T2 ;GET RESPONSE IN T1
JRST CPOPJ1 ;SKIP RETURN
GETSE1: MOVE T1,P1 ;GET BYTE POINTER BACK
PUSHJ P,CTISBP## ;RESET IT
PUSHJ P,CTEXT## ;GET RESPONSE
MOVSS T2 ;SWAP HALVES
CAIE T2,'ALL' ;VALID RESPONSE?
JRST GETSE0 ;NO, COMPLAIN AND ASK AGAIN
SETZ T1, ;GET A ZERO
JRST CPOPJ1 ;SKIP RETURN
>; END IFN FTSETS
;CONSTANTS
ONCTIP: 0 ;TYPE-IN POINTER
ONCTCH: 0 ;LAST CHAR TYPED IN.
ONCTOP: 0 ;TYPE-OUT POINTER
ONCCNT: 0 ;COUNTER FOR TYO
LINEP: POINT 7,LINBUF ;INPUT AND OUTPUT LINE BUFFER
LINBUF: BLOCK BUFLEN ;LINE BUFFER (LONG ENOUGH FOR WHY RELOAD /H MESSAGE)
ONCTSZ=<BUFLEN*5>-1 ;CHARACTERS WHICH FIT IN OUTPUT BUFFER
;ASK A QUESTION WITH A DEFAULT ANSWER
;CALL WITH:
; MOVEI T1,[ASCIZ /QUESTION/]
; MOVEI T2,[ASCIZ /ANSWER/]
; PUSHJ P,ASKDEF
; RETURN HERE ON CRLF
; ELSE RETURN HERE
;
; OR
; MOVEI T1,[ASCIZ/QUESTION/]
; MOVEI T2,[ASCIZ/ANSWER/]
; MOVEI T3,^DSECS TO WAIT
; PUSHJ P,ASKDFT
; CRLF
; OTHERWISE
ASKDFT::PUSH P,OPRCNT ;SAVE OLD OPRCNT
EXCH T3,OPRCNT ;FORCE CALLER'S
TLNE T3,-1 ;UNLESS OLD WAS VERY LARGE - IN WHICH CASE
MOVEM T3,OPRCNT ;OPR TYPED SOMETHING, DON'T INTERFERE
PUSHJ P,ASKDEF ;ASK THE QUESTION
CAIA ;PRESERVE SKIPNESS
AOS -1(P) ;...
POP P,OPRCNT ;RESTORE OLD TIMEOUT
POPJ P,
;ROUTINE TO MAKE SURE WE GIVE THE OPR TIME TO ANSWER, BECAUSE WE
;THINK WE MAY HAVE TIMED HIM OUT UNFAIRLY, AND THE NEXT QUESTION IS IMPORTANT
RSTDEF::SKIPL DEFALW ;HAS OPR BEEN TIMED OUT?
POPJ P, ;NO, NOTHING TO DO
PUSH P,T1 ;YES, SAVE T1
MOVEI T1,^D60 ;MAKE TIMEOUT AT LEAST A MINUTE AGAIN
CAMLE T1,OPRCNT ;SO OPR CAN INTERVENE
MOVEM T1,OPRCNT ; (NEW IS LONGER, USE IT)
SETZM DEFALW ;AND FORGET HE ISN'T THERE
JRST TPOPJ## ;RETURN
ASKDEF::PUSH P,T2 ;SAVE T2
PUSHJ P,ICONM ;OUTPUT QUESTION
PUSHJ P,OPOUT ; ..
POP P,T1 ;RESTORE ANSWER
MOVE T2,DEFSP ;GET BYTE POINTER
HLL T1,T2 ; ..
ASKDF1: ILDB T3,T1 ;COPY STRING
IDPB T3,T2 ; ..
JUMPN T3,ASKDF1 ; ..
MOVEI T3,15 ;ADD ON A CR
IDPB T3,T2 ; ..
MOVE T1,OPRCNT ;ALLOW 60 SEC.
IMULI T1,JIFSEC## ; ..
SKIPGE DEFALW ;IF THE OPR HAS BEEN TIMED OUT ALREADY,
MOVEI T1,1 ; HURRY ALONG
MOVEM T1,DEFLAG ;STORE TICKS TILL TIMOUT AS A FLAG
MOVE T1,DEFSP ;SETUP POINTER
MOVEM T1,DEFPTR ; ..
JRST GETLI0
DEFSP: POINT 7,DEFBUF
DEFLAG: -1
DEFPTR: POINT 7,DEFBUF
DEFBUF: BLOCK 24 ;ENOUGH FOR 99 CHAR DEFAULT
OPRCNT: EXP ^D60 ;SECONDS TILL OPR ASSUMED NOT PRESENT
DEFALW: 0 ;-1 TO TAKE DEFAULT ALWAYS
;SUBROUTINE TO PUT A DECIMAL STRING INTO THE DEFAULT BUFFER
DECDEF: MOVEI T2,"0" ;ALWAYS FORCE 2 DIGITS
CAIGE T1,^D10 ;WILL WE GET MORE THAN ONE ANYWAY?
IDPB T2,DEFPTR ;NO--ADD IN LEADING DIGIT
DCDFLP: IDIVI T1,12
HRLM T2,(P)
SKIPE T1
PUSHJ P,DCDFLP
HLRZ T1,(P)
ADDI T1,"0"
IDPB T1,DEFPTR
POPJ P,0
;SUBROUTINE TO PUT AN ASCIZ STRING INTO THE DEFAULT BUFFER
DEFSTR: HRLI T1,(POINT 7,) ;MAKE A BYTE POINTER
DEFST0: ILDB T2,T1 ;FETCH A CHAR
JUMPE T2,CPOPJ ;RETURN TO CALLER
IDPB T2,DEFPTR ;STORE THIS ONE
JRST DEFST0 ;ONWARDS
REFLOG::SETTYO
PUSHJ P,INLMES## ;CALLED BY DSKWNZ ROUTINE IN COMMON WHEN
; ONE OR MORE DISKS HAVE BEEN REFRESHED.
ASCIZ /To automatically log-in under [1,2] type "LOGIN"
/
JRST OPOUT
MEMBAD: MOVEI T1,[ASCIZ /%Memory from /]
PUSHJ P,ICONM
MOVE T1,U
PUSHJ P,PRT22A##
MOVEI T1,[ASCIZ / to /]
PUSHJ P,CONMES##
MOVE T1,P3
SUBI T1,1
PUSHJ P,PRT22A##
MOVEI T1,[ASCIZ / is OFF-LINE
/]
PUSHJ P,CONMES##
PUSHJ P,OPOUT
MOVEI T1,[ASCIZ/Do you want it to be 1) ON-LINE, 2) OFF-LINE, or 3) Down? (Type #)
/]
MOVEI T2,[ASCIZ /2 ;Default/]
PUSHJ P,ASKDEF
JRST MEMBAD
PUSHJ P,DECIN##
JRST MEMBAD
JRST MEMBAD
SOJE T2,CPOPJ
SOJE T2,CPOPJ2##
SOSE T2
JRST MEMBAD
CPOPJ1: AOS (P)
CPOPJ: POPJ P,
SUNXMT::PUSH P,P1 ;SAVE WORKING ACS
PUSH P,P2
PUSH P,P3
SETZB T4,NXMTAB## ;ZERO HIGHEST EXISTANT ADDRESS SEEN, AND NXMTAB
MOVE T1,[NXMTAB##,,NXMTAB##+1]
MOVEI T2,NXMTAB## ; ..
BLT T1,NXMTBL##-1(T2)
MOVEI P1,CORBLK## ;NUMBER OF PAGES OF CORE POSSIBLE
MOVE T2,[POINT 1,NXMTAB##]
MOVEI T3,1 ;TO MARK A PAGE AS NON-EXISTANT
SETZB P2,U ;ZERO P2 TO CALL A ROUTINE IN SYSINI,
; START LOOKING FOR NXM AT 0
SUNXM0:
IFN FTKL10,<
CONO APR,LP.CSF+LP.NXM ;CLEAR NXM FLAG
>
IFN FTKS10,<
WRAPR SP.CSF+SP.NXM
>
IBP T2 ;NEXT BYTE IN NXMTAB
MOVEI P3,MEMITL## ;NUMBER OF WAYS THE MEMORY CAN BE INTERLEAVED
SUNXM1: PUSH P,U ;SAVE THE CURRENT ADDRESS
ADDI U,-1(P3) ;CHECK PAGE PLUS INTERLEAVE OFFSET
PUSHJ P,REFMEM## ;REFERENCE TIS ADDRESS
POP P,U ;RESTORE THE CURRENT ADDRESS
SOJG P3,SUNXM1 ;LOOK AT NEXT ADDRESS WITHIN THIS PAGE
CONSO APR,NXM## ;NON-EXISTANT MEMORY SEEN?
JRST SUNXM2 ;NO
DPB T3,T2 ;YES, MARK THE PAGE AS NON-EXISTANT
JUMPN T4,SUNXM3 ;JUMP IF THE LAST PAGE LOOKED AT WAS NXM
SKIPA T4,U ;NOT SO, SO REMEMBER THE ADDRESS OF HIGHEST
; EXISTANT PAGE SEEN SO FAR
SUNXM2: MOVEI T4,0 ;MEMORY EXISTS, HAVEN'T SEEN THE HIGHEST EXISTANT PAGE YET
SUNXM3: ADDI U,PAGSIZ## ;GO ON TO THE NEXT PAGE OF MEMORY
SOJG P1,SUNXM0 ; PROVIDED ALL POSSIBLE MEMORY HASN'T BEEN CHECKED
SUNXM4: IDPB T3,T2 ;ONES TO THE END OF THIS WORD IN NXMTAB
TLNE T2,770000 ; ..
JRST SUNXM4 ; ..
SKIPN T4 ;SKIP IF THE HIGHEST POSSIBLE PAGE OF MEMORY DIDNT EXIST
MOVE T4,U ;IT DID, SO U CONTAINS THE ADDRESS OF THE HIGHEST PAGE
POP P,P3 ;RESTORE ACS
POP P,P2
POP P,P1
POPJ P,
IFN FTXMON,<
;SUBROUTINE TO ALLOCATE A MAP FOR A NON-ZERO SECTION
;CALL WITH:
; T1 = SECTION NUMBER,,0
;RETURNS WITH A MAP ALLOCATED AND ITS ADDRESS STORED IN THIS CPUS
; EXEC SECTION MAP
ALCSMP: HLRZ T2,T1 ;GET DESIRED SECTION
ADDI T2,SECTAB ;OFFSET INTO SECTION MAP TABLE
ADD T2,.CPEPT## ;INDEX INTO THE EPT
SKIPE (T2) ;MAP ALREADY ALLOCATED?
POPJ P, ;YES--DONE
PUSH P,MONVFF##
PUSH P,T1
MOVEI T1,.EUPMP
MOVEM T1,MONVFF##
MOVEI T1,PAGSIZ##
MOVSI T2,(<PM.DCD>B2+PM.WRT+PM.CSH+PM.SWB)
PUSHJ P,ONCMAP##
MOVE T1,[.EUPMP,,.EUPMP+1]
SETZM .EUPMP
BLT T1,.EUPMP+PAGSIZ##-1
POP P,T1
LSH T1,-^D18
MOVE T2,.CPMAP##
MOVE T3,.EUPMP/PAGSIZ##(T2)
TLZ T3,(PM.KPM) ;TURN OFF "KEEP ME"
IOR T3,.CPKPM## ;LIGHT PM.KPM IF CPU HAS AN MCA25
MOVE T2,.CPEPT##
ADDI T2,(T1)
MOVEM T3,SECTAB(T2)
REPEAT 0,<
CAIGE T1,(MS.FMD) ;IS THIS AN EXTENDED SECTION?
JRST ALCSM2 ;NO, DON'T BOTHER THE SPT
CAIE T1,(MS.HGH) ;YES, IS IT THE HIGH HIGH MAP?
JRST ALCSM1 ;NO, HANDLE DIFFERENTLY
MOVE T2,.CPCPN## ;YES, GET OUR CPU NUMBER
SKIPN SPTHGH##(T2) ;IF FIRST TIME HERE,
MOVEM T3,SPTHGH##(T2) ;STORE MAP POINTER IN OUR SPT SLOT FOR MS.HGH
JRST ALCSM2 ;DONE HERE
ALCSM1: MOVEM T3,SPTCOM##-<(MS.FMD)>(T1) ;STORE DATA MAP POINTER IN SPT
ALCSM2:>
POP P,MONVFF##
POPJ P,
FFMD1:: 0
RELMD1::0
>
REPEAT 0,<
;SUBROUTINE TO ALLOCATE PHYSICAL PAGES (NOT IN ANY MAP)
;CALL WITH:
; T1 = NUMBER OF PAGES TO ALLOCATE
;RETURNS CPOPJ IF NONE AVAILABLE, CPOPJ1 T1 = WHERE ALLOCATED
GETPPG: PUSH P,P1
PUSH P,P2
MOVE P1,T1
MOVE P2,MONPFF##
LSH P2,W2PLSH##
GETPP1: MOVE T2,P2
IDIVI T2,^D36
MOVNS T3
MOVSI T4,400000
LSH T4,(T3)
IORM T4,NXMTAB##(T2)
AOS P2
SOJG T1,GETPP1
MOVE T1,MONPFF##
LSH P1,P2WLSH##
ADDM P1,MONPFF##
POP P,P2
POP P,P1
JRST CPOPJ1
>; END REPEAT 0
IFN FTXMON,<
;SUBROUTINE TO ALLOCATE SKY HIGH SEGMENT SECTION MAPS FOR NON-BOOT CPUS
ALCSHM: PUSHJ P,SAVE3## ;SAVE AC'S
MOVE P2,.CPEPT## ;GET EPT ADDRESS
MOVE P3,.CPEPT##-.CPCDB##(P1) ;GET TARGET CPU'S EPT ADDRESS
REPEAT 0,<
MOVE P3,.CPCPN##-.CPCDB##(P1)
MOVEM T1,SPTHGH##(P3)
>
POPJ P,
>;END IFN FTXMON
DEVICE: BLOCK 1 ;MONITOR BOOTSTRAP DEVICE
FNAME: BLOCK 1 ;MONITOR BOOTSTRAP FILE NAME
FEXT: BLOCK 1 ;MONITOR BOOTSTRAP EXTENSION
PPN: BLOCK 1 ;MONITOR BOOTSTRAP PPN
SFDLST: BLOCK 5 ;MONITOR BOOTSTRAP SFDS
PRESSL::BLOCK 1 ;NON-ZERO IF USING PRESERVED SSL
PREASL::BLOCK 1 ;NON-ZERO IF USING PRESERVED ASL
PRESDL::BLOCK 1 ;NON-ZERO IF USING PRESERVED SDL
PRECNT: BLOCK 1 ;COUNT OF ENTRIES FOUND
PREERR: BLOCK 1 ;NON-ZERO IF AN ERROR DETECTED
BLDTXT: BLOCK 1 ;ADDRESS OF IDENTIFYING TEXT
BLDTBL: BLOCK 1 ;ADDRESS OF TABLE IN BOOTSTRAP VECTOR
BLDPTR: BLOCK 1 ;AOBJN POINTER TO TABLE
SAVTBL: BLOCK 1 ;SAVED ADDRESS OF TABLE IN BOOTSTRAP VECTOR
SAVPTR: BLOCK 1 ;SAVED AOBJN POINTER TO TABLE
FSTTIM::BLOCK 1 ;NON-ZERO FOR CALL TO REDHOM
RADIX 8
XLIST ;LITERALS
LIT
LIST
VAR
ONCEND::END