Trailing-Edge
-
PDP-10 Archives
-
tops20-v7-ft-dist1-clock
-
7-sources/lodunl.b36
There are 3 other files named lodunl.b36 in the archive. Click here to see a list.
%TITLE 'U N L O A D -- Unload and copy routines'
!<BLF/REQUIRE 'RMSBLF.REQ'>
MODULE unload (IDENT = '1'
) =
BEGIN
!
! COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1984, 1986.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND
! COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
! THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR
! ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
! AVAILABLE TO ANY OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE
! SOFTWARE IS HEREBY TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
! NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
! EQUIPMENT CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF
! ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
!++
! FACILITY: RMSLOD
!
! ABSTRACT:
!
! UNLOAD unloads the RMS index file specified by INFAB into
! the sequential file specified by OUTFAB. The key for unloading,
! if the input file is multi-key, is passed to UNLOAD in the CTX
! field of INFAB. The sequential file created by the UNLOAD
! operation has all the characteristics of the indexed file
! except for being sequential organization.
!
! ENVIRONMENT: Used by RMSLOD, user mode
!
! AUTHOR: Ron Lusk , CREATION DATE: 25-Jul-84
!
! MODIFIED BY:
!
! , : VERSION
! 01 -
! 20-Sep-85 asp - Add Joe Martin mod to Ron Lusk's pieces.
!
! 5-May-86 asp - Make lodcpy use move mode, and let it load
! RMS relative files
!--
!
! TABLE OF CONTENTS
!
FORWARD ROUTINE
lodunl, ! Unload indexed file
ustats : NOVALUE, ! Print unload stats
lodcpy, ! Load non-indexed file
cpystats : NOVALUE; ! Print LODCPY stats
!
! INCLUDE FILES:
!
LIBRARY 'rmsint'; ! RMS symbols
LIBRARY 'bli:xport'; ! For string descriptors
LIBRARY 'bli:fao'; ! FAOL stuff
!
! MACROS:
!
! None
!
! EQUATED SYMBOLS:
!
LITERAL
lod$_success = 1,
lod$_bug = 0,
unload_buffer_length = 300;
!
! OWN STORAGE:
!
OWN
faoprm : vector [15],
control,
unload_buffer : VECTOR [unload_buffer_length],
inp_count, ! Records read
cpy_count, ! Records copied
unl_count, ! Records unloaded
infab : REF $fab_decl, ! Point to input FAB
inrab : $rab_decl, ! Real input RAB
outfab : REF $fab_decl, ! Point at output FAB
outrab : $rab_decl; ! Real output RAB
!
! EXTERNAL REFERENCES:
!
! None
%SBTTL 'LODUNL - unload indexed file into sequential file'
GLOBAL ROUTINE lodunl (p_infab, p_outfab) =
!++
! FUNCTIONAL DESCRIPTION:
!
!
! FORMAL PARAMETERS
!
! NONE.
!
! IMPLICIT INPUTS
!
! NONE.
!
! ROUTINE VALUE:
! COMPLETION CODES:
!
! NONE.
!
! SIDE EFFECTS:
!
! NONE.
!
!--
BEGIN
!
! Copy the parameters around
!
infab = .p_infab;
outfab = .p_outfab;
!
! Set up the output FAB
!
outfab [fab$v_org] = fab$k_seq; ! Sequential
outfab [fab$v_bsz] = .infab [fab$v_bsz]; ! Use same byte size
outfab [fab$h_mrs] = .infab [fab$h_mrs]; ! Record length
outfab [fab$v_rfm] = .infab [fab$v_rfm]; ! Same record format
!
! Set up the input RAB. The key we will read the file
! with is stored in the CTX field of the input FAB.
!
$rab_init (rab = inrab, fab = .infab, !
rac = seq, krf = .infab [fab$g_ctx], !rop = loc,!JM 25JUL85
ubf = unload_buffer, !
usz = unload_buffer_length); !
!+
! If we are reading on the primary key, we can
! fly a bit faster with Read-Ahead set.
!-
IF .inrab [rab$b_krf] EQL 0 ! Primary key?
THEN
inrab [rab$v_rah] = 1; ! Fill the buffers
!
! Set up the output RAB.
!
$rab_init (rab = outrab, fab = .outfab, !
rac = seq, ubf = unload_buffer, !
usz = unload_buffer_length); !
!
! Open the input file
!
IF $open (fab = .infab) ! Open file
THEN
BEGIN
IF NOT $connect (rab = inrab) ! Connect
THEN
RETURN lod$_bug; ! Problem
END
ELSE
RETURN lod$_bug;
!
! Create the output file
!
IF $create (fab = .outfab) ! Create file
THEN
BEGIN
IF NOT $connect (rab = outrab) ! Connect
THEN
RETURN lod$_bug; ! Problem
END
ELSE
RETURN lod$_bug; ! Problem
inp_count = unl_count = 0; ! Zero counters
!+
! Copy the file
!-
WHILE ($get (rab = inrab)) DO
BEGIN
inp_count = .inp_count + 1;
outrab [rab$a_rbf] = .inrab [rab$a_rbf]; ! Find record
outrab [rab$h_rsz] = .inrab [rab$h_rsz]; ! and its length
IF $put (rab = outrab) !
THEN
unl_count = .unl_count + 1; !
END;
!
! Close the files
!
$close (fab = .infab);
$close (fab = .outfab);
!
! Write out the final statistics
!
ustats ();
IF .inp_count EQL .unl_count ! OK?
THEN
RETURN lod$_success
ELSE
RETURN lod$_bug;
END; !End of LODUNL
%SBTTL 'USTATS - print UNLOAD results'
ROUTINE ustats : NOVALUE =
BEGIN
LITERAL
tty_buffer_length = 200/5; ! Two-hundred characters
LOCAL
ttyfab : $fab_decl, ! TTY output FAB
ttyrab : $rab_decl, ! " " RAB
ttylen, ! Length of output
ttybuf : VECTOR [tty_buffer_length], ! TTY: buffer
ttydsc : $str_descriptor ( ! Buffer descriptor for
string = (tty_buffer_length*5, ! TTY:
CH$PTR (ttybuf))); !
!
! Initialize blocks
!
$fab_init (fab = ttyfab, fac = put, fna = 'TTY:');
$rab_init (rab = ttyrab, fab = ttyfab);
$open (fab = ttyfab);
$connect (rab = ttyrab);
!
! Write the results
!
IF .inp_count EQL .unl_count ! All OK?
THEN
BEGIN
control = $fao_ctl ('!/!7SL record!%S unloaded!/');
faoprm [0] = .unl_count;
END
ELSE
BEGIN
control = $fao_ctl ('!/% !7SL record!%S read,', !
' but only !SL record!%S unloaded!/'); !
faoprm [0] = .inp_count;
faoprm [1] = .unl_count;
END;
$faol (ctrstr = .control, outbuf = ttydsc, !
prmlst = faoprm, outlen = ttylen);
ttyrab [rab$h_rsz] = .ttylen; ! Length of output
ttyrab [rab$a_rbf] = ttybuf; ! Address of data
$put (rab = ttyrab);
$close (fab = ttyfab); ! Close the TTY
END; ! End routine USTATS
%SBTTL 'LODCPY'
GLOBAL ROUTINE lodcpy (p_infab, p_outfab) =
!++
! FUNCTIONAL DESCRIPTION:
!
!
! FORMAL PARAMETERS
!
! NONE.
!
! IMPLICIT INPUTS
!
! NONE.
!
! ROUTINE VALUE:
! COMPLETION CODES:
!
! NONE.
!
! SIDE EFFECTS:
!
! NONE.
!
!--
BEGIN
!
! Copy the parameters around
!
infab = .p_infab;
outfab = .p_outfab;
!
! Set up the RABs
!
$rab_init (rab = inrab, fab = .infab, !
rac = seq, !
ubf = unload_buffer, !
usz = unload_buffer_length); !
$rab_init (rab = outrab, fab = .outfab, !
rac = seq, ubf = unload_buffer, !
usz = unload_buffer_length); !
IF .outfab [fab$v_org] = fab$k_rel ! Relative file?
THEN
BEGIN
outrab [rab$b_rac] = rab$k_key;
outrab [rab$a_kbf] = inp_count;
END;
!
! Open the input file
!
IF $open (fab = .infab) ! Open file
THEN
BEGIN
IF NOT $connect (rab = inrab) ! Connect
THEN
RETURN lod$_bug; ! Problem
END
ELSE
RETURN lod$_bug;
!
! Create the output file
!
IF $create (fab = .outfab) ! Create file
THEN
BEGIN
IF NOT $connect (rab = outrab) ! Connect
THEN
RETURN lod$_bug; ! Problem
END
ELSE
RETURN lod$_bug; ! Problem
inp_count = cpy_count = 0; ! Zero counters
!+
! Copy the file
!-
WHILE ($get (rab = inrab)) DO
BEGIN
inp_count = .inp_count + 1;
outrab [rab$a_rbf] = .inrab [rab$a_rbf]; ! Find record
outrab [rab$h_rsz] = .inrab [rab$h_rsz]; ! and its length
IF $put (rab = outrab) ! Write it
THEN
cpy_count = .cpy_count + 1; ! OK
END;
!
! Close the files
!
$close (fab = .infab);
$close (fab = .outfab);
!
! Write out the final statistics
!
cpystats ();
IF .inp_count EQL .cpy_count ! OK?
THEN
RETURN lod$_success
ELSE
RETURN lod$_bug;
END; !End of LODCPY
%SBTTL 'CPYSTATS - print UNLOAD results'
ROUTINE cpystats : NOVALUE =
BEGIN
LITERAL
tty_buffer_length = 200/5; ! Two-hundred characters
LOCAL
ttyfab : $fab_decl, ! TTY output FAB
ttyrab : $rab_decl, ! " " RAB
ttylen, ! Length of output
ttybuf : VECTOR [tty_buffer_length], ! TTY: buffer
ttydsc : $str_descriptor ( ! Buffer descriptor for
string = (tty_buffer_length*5, ! TTY:
CH$PTR (ttybuf))); !
!
! Initialize blocks
!
$fab_init (fab = ttyfab, fac = put, fna = 'TTY:');
$rab_init (rab = ttyrab, fab = ttyfab);
$open (fab = ttyfab);
$connect (rab = ttyrab);
!
! Write the results
!
IF .inp_count EQL .cpy_count ! All OK?
THEN
BEGIN
control = $fao_ctl ('!/!7SL record!%S loaded!/');
faoprm [0] = .cpy_count;
END
ELSE
BEGIN
control = $fao_ctl ('!/% !7SL record!%S read,', !
' but only !SL record!%S loaded!/'); !
faoprm [0] = .inp_count;
faoprm [1] = .cpy_count;
END;
$faol (ctrstr = .control, outbuf = ttydsc, !
prmlst = faoprm, outlen = ttylen);
ttyrab [rab$h_rsz] = .ttylen; ! Length of output
ttyrab [rab$a_rbf] = ttybuf; ! Address of data
$put (rab = ttyrab);
$close (fab = ttyfab); ! Close the TTY
END; ! End routine CPYSTATS
END !End of Module UNLOAD
ELUDOM