Trailing-Edge
-
PDP-10 Archives
-
tops20-v7-ft-dist1-clock
-
7-sources/scrinsert.bli
There are 10 other files named scrinsert.bli in the archive. Click here to see a list.
%TITLE 'SCRINSERT - insert a line on the screen'
MODULE SCRINSERT ( ! Insert a line on the screen
IDENT = '3-001' ! File: SCRINSERT.BLI Edit: GB3001
) =
BEGIN
!COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1981, 1988. ALL RIGHTS RESERVED.
!
!THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED ONLY
!IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE INCLUSION OF
!THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER COPIES THEREOF MAY
!NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE
!TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
!
!THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE AND
!SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT CORPORATION.
!
!DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
!SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
!
!++
! FACILITY: EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
! This module updates the screen information vector to
! reflect the insertion of a line.
!
! ENVIRONMENT: Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: September 8, 1979
!
! MODIFIED BY:
!
! 1-001 - Original. DJS 12-Feb-1981. This module was created by
! extracting the routine EDT$$SC_INSLN from module SCREEN.
! 1-002 - Regularize headers. JBS 13-Mar-1981
! 1-003 - Repaint when a line is inserted above the top of the screen,
! but not when a line is inserted at the top of the screen.
! JBS 24-Sep-1981
! 1-004 - Check a new flag for scrolling regions. JBS 31-Aug-1982
! 1-005 - Modify for the new screen updater. SMB 17-Sep-1982
! 1-006 - Modify to use new 48 bit macros. STS 01-Oct-1982
! 1-007 - Take out references to L_CUR_SCRLN. SMB 04-Oct-1982
! 1-008 - Reduce parameters to SC_LNINS. SMB 06-Oct-1982
! 1-009 - Change the way SC_FNDREC is used. SMB 08-Oct-1982
! 1-010 - Change EDT$$G_SCR_CHGD to EDT$$G_SCR_REBUILD. JBS 09-Oct-1982
! 1-011 - Set the current screen pointer when a line is inserted. SMB 10-Oct-1982
! 1-012 - Add support for NOTRUNCATE mode. JBS 11-Oct-1982
! 1-013 - Update L_CUR_SCRLN on insert. SMB 13-Oct-1982
! 1-014 - Don't rebuild the screen after deleting a line. JBS 23-Oct-1982
! 1-015 - Don't increment the record number if our record was replaced
! rather than inserted before. JBS 25-Oct-1982
! 1-016 - Check for replacing a multi-line record. JBS 26-Oct-1982
! 1-017 - Fix notruncate bug on searching for deleted lines. SMB 02-Dec-1982
! 1-018 - Remove the edit buffer. JBS 27-Dec-1982
! 1-019 - Remove the unused reference to EDT$$G_CS_CHNO. JBS 27-Dec-1982
! 3-001 - Add updates from V3 sources. GB 03-May-1983
!--
%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!
REQUIRE 'EDTSRC:TRAROUNAM';
FORWARD ROUTINE
EDT$$SC_INSLN : NOVALUE;
!
! INCLUDE FILES:
!
REQUIRE 'EDTSRC:EDTREQ';
!
! MACROS:
!
! NONE
!
! OWN STORAGE:
!
! NONE
!
! EXTERNAL REFERENCES:
!
! In the routine
%SBTTL 'EDT$$SC_INSLN - mark a line for insert'
GLOBAL ROUTINE EDT$$SC_INSLN ( ! Mark a work file line for insert
REC_ADDR, ! Address of new line
REC_LEN ! Length of new line
) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!
! A line has been inserted. Mark the line for insert in the screen
! information structure.
!
! FORMAL PARAMETERS:
!
! REC_ADDR the address of the new line
!
! REC_LEN the length of the new line
!
! IMPLICIT INPUTS:
!
! LN_PTR
! LN_BUF
! SCR_BUF
! CUR_BUF
!
! IMPLICIT OUTPUTS:
!
! CUR_SCRLN
! CSR_SCRPTR
!
! ROUTINE VALUE:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
EXTERNAL ROUTINE
EDT$$SC_LNINS, ! Insert a line into sceen structure
EDT$$CMP_LNO, ! Compare line numbers
EDT$$SC_FNDREC; ! Find a record in the data structure
EXTERNAL
LNO0,
LN_PTR,
CUR_SCRLN : LN_BLOCK, ! Current screen line
LN_BUF, ! Workfile line buffer
CSR_SCRPTR : REF SCREEN_LINE, ! Pointer to current line screen info
SCR_BUF : REF TBCB_BLOCK, ! Current screen block
CUR_BUF : REF TBCB_BLOCK; ! Current text buffer control block
LOCAL
NEW_SCRPTR : REF SCREEN_LINE, ! Temporary screen line
CURSOR_LINE, ! Relative cursor line
CURSOR_POS, ! Cursor position on the line
SCRPTR : REF SCREEN_LINE, ! Current line screen info
CURSOR_DELETED, ! 1 = the cursor line had been deleted
DISP; ! Displacement from cursor line
!+
! Only perform this routine if we are in the current screen data structure and a data structure exists.
!-
IF (.SCR_BUF NEQA .CUR_BUF) THEN RETURN;
!+
! Get the pointer which corresponds to the current record. The insert will be just
! before that record.
!-
SCRPTR = EDT$$SC_FNDREC (CH$DIFF (.LN_PTR, CH$PTR (LN_BUF)), DISP);
!+
! We will do the insert above the current screen information block.
! If there is a deleted line before the current screen information block
! we will replace it. If that line is the cursor line, don't increment
! the record number of the cursor line.
!-
IF (.SCRPTR NEQA 0)
THEN
BEGIN
!+
! See if the first line of the cursor record has already been deleted.
!-
NEW_SCRPTR = .CSR_SCRPTR;
WHILE (.NEW_SCRPTR [SCR_LINE_IDX] NEQ 0) DO
NEW_SCRPTR = .NEW_SCRPTR [SCR_PRV_LINE];
IF ((.NEW_SCRPTR [SCR_EDIT_FLAGS] AND SCR_EDIT_DELLN) NEQ 0)
THEN
CURSOR_DELETED = 1
ELSE
CURSOR_DELETED = 0;
!+
! Now insert just before the current line.
!-
EDT$$SC_LNINS (.SCRPTR, .REC_ADDR, .REC_LEN);
!+
! If we just replaced the current screen line, don't increment it's record number.
! (The call to EDT$$SC_LNINS may change the screen data block pointed to by NEW_SCRPTR, but
! BLISS doesn't know this unless we tell it.)
!-
NEW_SCRPTR = .NEW_SCRPTR;
IF ( NOT (.CURSOR_DELETED AND ((.NEW_SCRPTR [SCR_EDIT_FLAGS] AND SCR_EDIT_DELLN) EQL 0)))
THEN
BEGIN
IF (EDT$$CMP_LNO (CUR_BUF [TBCB_CUR_LIN], CUR_SCRLN) LEQ 0) !
THEN
ADDLINE (LNO0, CUR_SCRLN, CUR_SCRLN);
END;
END;
END; ! of routine EDT$$SC_INSLN
!<BLF/PAGE>
END ! of module EDT$SCRINSERT
ELUDOM