Trailing-Edge
-
PDP-10 Archives
-
tops20v41_monsrc
-
monitor-sources/ttysrv.mac
There are 50 other files named ttysrv.mac in the archive. Click here to see a list.
; Edit= 8883 to TTYSRV.MAC on 11-Aug-88 by GSCOTT
;Make modem scan logic work properly when connected to DECserver-200s by
;reverse LAT, since the DECserver-200s don't follow proper modem protocol.
; *** Edit 7249 to TTYSRV.MAC by MRASPUZZI on 21-Feb-86
; Add code to activate a job with CRLF
; *** Edit 7245 to TTYSRV.MAC by MRASPUZZI on 18-Feb-86
; Fix autobaud code to handle 2400, 4800, and 9600 baud better
; Edit 7167 to TTYSRV.MAC by TBOYLE on 21-Oct-85, for SPR #19350
; Fix double prompts and multiple linefeeds at TCI,TCIB,TTSMOD.
; Edit 7141 to TTYSRV.MAC by PRATT on 28-Aug-85, for SPR #17825 (TCO 6.1.1531)
; Fix half-duplex line count never incrementing problem.
; Edit 7139 to TTYSRV.MAC by TBOYLE on 23-Aug-85 (TCO 6-1-1529)
; Fix possible ILMNRF at return from ASGSHT.
;Edit 6702 to TTYSRV.MAC by MOSER on Tue 5-Mar-85, for SPR #19687
; ITRLGO - ACJ - AP8
;EDIT 6702 - ERRJMP AFTER MTOPR TO SET TERMINAL SPEED - PREVENT ITRLGO
;Edit 3019 to TTYSRV.MAC by LOMARTIRE on Thu 22-Sep-83, for SPR #17801
; Do not translate ESCAPEs in .TTATE mode
;EDIT 2926 - WAKE UP HALF DUPLEX LINES AT CR FOR X29
; UPD ID= 155, FARK:<4-1-WORKING-SOURCES.MONITOR>TTYSRV.MAC.4, 10-Sep-82 13:18:59 by MOSER
;EDIT 2807 - FIX BUG IN 1813
; UPD ID= 111, FARK:<4-1-WORKING-SOURCES.MONITOR>TTYSRV.MAC.3, 30-Jul-82 09:12:57 by DONAHUE
;Edit 2637 - Fix DEFSTRs of TTOMX and TTOCN
; UPD ID= 42, FARK:<4-1-WORKING-SOURCES.MONITOR>TTYSRV.MAC.2, 2-Apr-82 23:04:12 by ZIMA
;Edit 2607 - add ENDAV.s to ACVARs to use v5 MACSYM, some conversion to SAVEAC.
;<4-1-FIELD-IMAGE.MONITOR>TTYSRV.MAC.2, 25-Feb-82 20:51:48, EDIT BY DONAHUE
;UPDATE COPYRIGHT DATE
; UPD ID= 946, FARK:<4-WORKING-SOURCES.MONITOR>TTYSRV.MAC.7, 15-Jan-82 08:53:48 by ZIMA
;Edit 1973 - make TTFLG1, TT%SAL global to reference in IMPTS.
; UPD ID= 715, FARK:<4-WORKING-SOURCES.MONITOR>TTYSRV.MAC.6, 18-Aug-81 19:13:17 by ZIMA
;Edit 1924 - put edit 1820 in standard form. No code changes.
;Edit 1924 - put edit 1813 in standard form. No code changes.
; UPD ID= 440, FARK:<4-WORKING-SOURCES.MONITOR>TTYSRV.MAC.5, 13-Apr-81 16:06:06 by ZIMA
;Edit 1844 - Fix STPAR for noop conditions as documented.
; UPD ID= 428, FARK:<4-WORKING-SOURCES.MONITOR>TTYSRV.MAC.4, 5-Apr-81 18:18:01 by ZIMA
;Edit 1840 - handle case of refusing links and all links are full.
; UPD ID= 335, FARK:<4-WORKING-SOURCES.MONITOR>TTYSRV.MAC.3, 15-Dec-80 22:18:23 by DEUFEL
;Edit 1820 - Add TT%ABW and TT%CRW definitions to TTSTAT for KS10's
; UPD ID= 315, FARK:<4-WORKING-SOURCES.MONITOR>TTYSRV.MAC.2, 8-Dec-80 10:04:34 by SCHMITT
;Edit 1813 - Fix edit 1738
; UPD ID= 67, FARK:<4-WORKING-SOURCES.MONITOR>TTYSRV.MAC.4, 11-Jun-80 12:52:05 by SCHMITT
;Edit 1738 - Make returning LF's consistent with mode in which LF was entered.
; UPD ID= 55, FARK:<4-WORKING-SOURCES.MONITOR>TTYSRV.MAC.3, 10-Jun-80 11:58:11 by ZIMA
;EDIT 1734 - Remove edit 1730.
; UPD ID= 40, FARK:<4-WORKING-SOURCES.MONITOR>TTYSRV.MAC.2, 6-Jun-80 09:49:42 by SANICHARA
;<4.MONITOR>TTYSRV.MAC.155, 3-Jan-80 08:10:44, EDIT BY R.ACE
;UPDATE COPYRIGHT DATE
;<4.MONITOR>TTYSRV.MAC.154, 7-Dec-79 17:03:21, Edit by KONEN
;TCO 4.2592 -- Make sure TTCON1 does RET to avoid ILLUUO
; UPD ID= 70, SNARK:<4.MONITOR>TTYSRV.MAC.153, 30-Nov-79 11:50:40 by MILLER
; UPD ID= 48, SNARK:<4.1.MONITOR>TTYSRV.MAC.159, 28-Nov-79 18:02:09 by MILLER
;CHANGE TESTS ON TOWRN TO PREVENT INFINITE LOOPS
;<4.MONITOR>TTYSRV.MAC.152, 5-Nov-79 13:34:31, EDIT BY MURPHY
;<4.MONITOR>TTYSRV.MAC.151, 2-Nov-79 16:57:05, EDIT BY MURPHY
;PTY OUTPUT START LOGIC
;<4.MONITOR>TTYSRV.MAC.149, 31-Oct-79 12:39:38, EDIT BY MILLER
;MOVE DEF OF TTFPK TO STATIC DATA
;<4.MONITOR>TTYSRV.MAC.148, 28-Oct-79 09:12:06, EDIT BY R.ACE
;FIX SPELLING OF ULKTTY IN TTSSPD ROUTINE
;<4.MONITOR>TTYSRV.MAC.147, 26-Oct-79 15:13:46, EDIT BY ZIMA
;TCO 4.2557 - Change calling sequence to TTSSPD to provide error
; return for ACJ rejection. Now nonskip on error, skip on "success".
;<4.MONITOR>TTYSRV.MAC.146, 25-Oct-79 13:53:40, EDIT BY ENGEL
;TURN OFF ECHOING ON FULL DUPLEX LINES LINKED TO HALF-DUPLEX ONES
;<4.MONITOR>TTYSRV.MAC.145, 25-Oct-79 10:17:26, EDIT BY MURPHY
;FASTER WAKEUP ON OUTPUT EVENTS
;<4.MONITOR>TTYSRV.MAC.142, 10-Oct-79 13:47:32, EDIT BY MURPHY
;<4.MONITOR>TTYSRV.MAC.141, 6-Oct-79 12:49:05, EDIT BY HALL
;FIX MURPHY'S '20.' TO BE '^D20'
;<4.MONITOR>TTYSRV.MAC.140, 5-Oct-79 16:57:37, EDIT BY MURPHY
;FIX XOFF/XON PROBLEMS
;<4.MONITOR>TTYSRV.MAC.139, 3-Oct-79 15:28:01, EDIT BY HALL
;TTCHI - RETURN SUCCESS IF WAKING PROCESS FOR BINARY LINE
;<4.MONITOR>TTYSRV.MAC.138, 1-Oct-79 14:25:35, EDIT BY HELLIWELL
;<4.MONITOR>TTYSRV.MAC.137, 28-Sep-79 18:34:48, EDIT BY HELLIWELL
;<4.MONITOR>TTYSRV.MAC.136, 28-Sep-79 18:25:10, EDIT BY HELLIWELL
;<4.MONITOR>TTYSRV.MAC.135, 28-Sep-79 18:17:17, EDIT BY HELLIWELL
;<4.MONITOR>TTYSRV.MAC.134, 28-Sep-79 17:34:04, EDIT BY HELLIWELL
;<4.MONITOR>TTYSRV.MAC.133, 25-Sep-79 13:37:58, EDIT BY HELLIWELL
;<4.MONITOR>TTYSRV.MAC.132, 25-Sep-79 12:44:13, EDIT BY MURPHY
;<4.MONITOR>TTYSRV.MAC.131, 25-Sep-79 11:43:26, EDIT BY HELLIWELL
;TCO #4.2486 - FIX .MOTPS FUNCTION OF MTOPR
;<4.MONITOR>TTYSRV.MAC.130, 24-Sep-79 14:10:24, EDIT BY MURPHY
;<4.MONITOR>TTYSRV.MAC.129, 21-Sep-79 13:32:00, EDIT BY MURPHY
;<4.MONITOR>TTYSRV.MAC.128, 20-Sep-79 16:20:51, EDIT BY MURPHY
;SUCCESS/FAILURE RETURNS FOR TTSTI
;<4.MONITOR>TTYSRV.MAC.126, 20-Sep-79 14:20:45, EDIT BY MURPHY
;CHANGE FORMAT OF DEVICE DISPATCH MACRO
;<4.MONITOR>TTYSRV.MAC.125, 19-Sep-79 14:54:32, EDIT BY MURPHY
;NEW SYMBOLS WITH MNEMONIC SIGNIFICANCE FOR LINE TYPE VECTOR OFFSETS
;<OSMAN.MON>TTYSRV.MAC.1, 10-Sep-79 16:16:34, EDIT BY OSMAN
;TCO 4.2412 - Move definition of BUGHLTs, BUGCHKs, and BUGINFs to BUGS.MAC
;<4.MONITOR>TTYSRV.MAC.123, 23-Aug-79 12:42:26, Edit by LCAMPBELL
; Don't attempt sendall to inactive NVTs
;<4.MONITOR>TTYSRV.MAC.122, 16-Aug-79 14:43:33, EDIT BY TOMCZAK
;TTSET1 - TCO#4.2407 - Default to REFUSE LINKS when assigning CTY
;<4.MONITOR>TTYSRV.MAC.121, 21-May-79 12:58:35, EDIT BY HALL
;TTYDE0 - FIX INSTRUCTION REFERENCING TTFLGS
;<4.MONITOR>TTYSRV.MAC.120, 17-May-79 20:48:19, Edit by HESS
;FIX EDIT 118 (FORGOT COMMA)
;<4.MONITOR>TTYSRV.MAC.119, 15-May-79 09:39:49, Edit by MCLEAN
;REMOVE EXTRANEOUS INSTRUCTION AT TTCH10-5
;<4.MONITOR>TTYSRV.MAC.118, 12-May-79 13:49:46, EDIT BY MILLER
;FIX CODE AT TTYDE0
;<4.MONITOR>TTYSRV.MAC.117, 12-May-79 12:54:55, EDIT BY MILLER
;ADD TTGSTS FOR GETTING GDSTS BITS
;<4.MONITOR>TTYSRV.MAC.116, 11-May-79 14:34:07, EDIT BY MILLER
;<4.MONITOR>TTYSRV.MAC.115, 10-May-79 12:32:47, EDIT BY MILLER
;<4.MONITOR>TTYSRV.MAC.114, 30-Apr-79 22:51:23, Edit by MCLEAN
;<4.MONITOR>TTYSRV.MAC.113, 12-Apr-79 16:57:15, Edit by MCLEAN
;MORE XOFF FIXES SO WE WAKEUP BEFORE DOING XOFF
;<4.MONITOR>TTYSRV.MAC.112, 5-Apr-79 11:28:31, Edit by MCLEAN
;REMOVE 1ST ARG FROM GTOKM
;<4.MONITOR>TTYSRV.MAC.111, 11-Mar-79 13:19:49, EDIT BY KONEN
;UPDATE COPYRIGHT FOR RELEASE 4
;<4.MONITOR>TTYSRV.MAC.110, 7-Mar-79 14:06:14, Edit by MCLEAN
;FIX SALLI2 FOR BECOMMING ACTIVE AND BEING NOSKED ON RETURN
;<4.MONITOR>TTYSRV.MAC.109, 21-Feb-79 13:48:07, Edit by MCLEAN
;MAKE NON TERMINAL PSI'S DISABLEABLE BY -1 IN PSI
;<4.MONITOR>TTYSRV.MAC.108, 19-Feb-79 18:54:53, EDIT BY DBELL
;ADD MISSING INSTRUCTION AT TL22+11
;<4.MONITOR>TTYSRV.MAC.107, 15-Feb-79 13:43:54, EDIT BY DBELL
;FINISH TCO 4.2185
;<4.MONITOR>TTYSRV.MAC.106, 12-Feb-79 15:47:29, EDIT BY DBELL
;MAKE TCO 4.2185 BETTER BY SUPPRESSING LINK MESSAGE WHEN LINKING RANDOMLY
;<4.MONITOR>TTYSRV.MAC.105, 10-Feb-79 17:22:27, Edit by MCLEAN
;<4.MONITOR>TTYSRV.MAC.104, 10-Feb-79 17:17:33, Edit by MCLEAN
;ADD NEW XOFF CODE FOR FRONT-END
;<4.MONITOR>TTYSRV.MAC.102, 8-Feb-79 14:57:43, EDIT BY DBELL
;TCO 4.2185 - ALLOW ANY TERMINAL TO BE OBJECT FOR TLINK
;<4.MONITOR>TTYSRV.MAC.101, 2-Feb-79 23:38:41, Edit by MCLEAN
;ADD NEW VECTOR VSFEXO FOR XOFF RECOGNITION IN FRONT-END ;ENABLE/DISABLE FRONT-END XOFF RECOGNITION
;<4.MONITOR>TTYSRV.MAC.100, 31-Jan-79 12:23:58, Edit by MCLEAN
;REMOVE PREVIOUS EDIT
;<4.MONITOR>TTYSRV.MAC.99, 30-Jan-79 23:41:53, Edit by MCLEAN
;<4.MONITOR>TTYSRV.MAC.98, 21-Jan-79 20:11:10, Edit by MCLEAN
;MORE XON/XOFF ADJUSTMENTS
;<4.MONITOR>TTYSRV.MAC.97, 21-Jan-79 17:58:36, Edit by MCLEAN
;MORE XON/XOFF FIXES
;<4.MONITOR>TTYSRV.MAC.96, 19-Jan-79 18:09:05, Edit by MCLEAN
;FIX TTLNK3+1 TO SAVE T2
;<4.MONITOR>TTYSRV.MAC.95, 19-Jan-79 13:02:35, Edit by MCLEAN
;FIX TTCH12 TO HAVE STATIC NOT DYNAMIC ADDRESS
;<4.MONITOR>TTYSRV.MAC.94, 18-Jan-79 19:20:37, EDIT BY MILLER
;FIX TTXSET TO ALWAYS CLEAR XOFF NOW IN PROGRESS
;<4.MONITOR>TTYSRV.MAC.93, 18-Jan-79 18:23:06, Edit by MCLEAN
;FIX CONSO PI AT TTRLBF
;<4.MONITOR>TTYSRV.MAC.92, 17-Jan-79 11:37:06, EDIT BY HALL
;SUPPRESS SYMBOL FOR MSGLEN
;<4.MONITOR>TTYSRV.MAC.91, 14-Jan-79 15:07:15, Edit by MCLEAN
;MANY SPEEDUPS AND CLEANUPS
;<4.MONITOR>TTYSRV.MAC.89, 14-Jan-79 01:00:14, Edit by MCLEAN
;REMOVE JE TTSFG AT TTXON
;<4.MONITOR>TTYSRV.MAC.88, 11-Jan-79 19:59:17, Edit by MCLEAN
;FIX SENDXOFF ONCE MORE AT TTCHI9
;<4.MONITOR>TTYSRV.MAC.87, 9-Jan-79 18:10:55, Edit by MCLEAN
;<4.MONITOR>TTYSRV.MAC.86, 8-Jan-79 16:19:06, EDIT BY HALL
;AESTHETICS
;<4.MONITOR>TTYSRV.MAC.85, 7-Jan-79 19:50:31, Edit by MCLEAN
;XON/XOFF CUTOFF FIXES
;<4.MONITOR>TTYSRV.MAC.83, 5-Jan-79 09:55:46, EDIT BY ENGEL
; MAKE CHKPTY RESIDENT
;<4.MONITOR>TTYSRV.MAC.82, 28-Dec-78 22:44:26, Edit by MCLEAN
;ADD VSTPLN ;STOP LINE
;<4.MONITOR>TTYSRV.MAC.81, 28-Dec-78 16:26:53, Edit by MCLEAN
;FIX PSI FOR NON-TERMINAL INTERRUPTS
;<4.MONITOR>TTYSRV.MAC.80, 27-Dec-78 15:58:42, Edit by MCLEAN
;MAKE TTSTY 3 BITS AND GET CORRECT DEFSTR FOR TTXCN
;<4.MONITOR>TTYSRV.MAC.79, 24-Dec-78 16:28:34, EDIT BY DBELL
;MAKE ALL TTVTNN DEFINITIONS BE SUPPRESSED TO DDT
;<4.MONITOR>TTYSRV.MAC.78, 21-Dec-78 16:43:32, Edit by MCLEAN
;TEMP FIX AT TTCH22+3 TO FIX LOST INPUT EMPTY BUFFER INTERRUPTS
;<4.MONITOR>TTYSRV.MAC.77, 19-Dec-78 15:22:16, EDIT BY MURPHY
;ADD BLOCK PRIORITY ARG TO SCHED CALLS FOR TCITST, TCOTST, TTOBET
;<4.MONITOR>TTYSRV.MAC.76, 16-Dec-78 21:35:04, EDIT BY ZIMA
;TCO 4.2123 - FIX TERMINAL RAISE
;<4.MONITOR>TTYSRV.MAC.75, 11-Dec-78 23:01:42, Edit by MCLEAN
;ADD EXTRA BUFFERING FOR HIGH SPEED TERMINALS WHEN NECESSARY
;ADD NON-CONTROLLING TERMINAL PSI INTERRUPTS
;<4.MONITOR>TTYSRV.MAC.73, 13-Nov-78 21:53:47, Edit by MCLEAN
;FIX TTYDEA SO IT IS CHANNEL OFF WHILE DOING DE-ASSIGNMENTS
;<4.MONITOR>TTYSRV.MAC.72, 11-Nov-78 18:27:40, Edit by MCLEAN
;FIX TTRLB1 SO CHANNEL IS NOT TURNED ON IF CALLER HAS IT OFF
;<4.MONITOR>TTYSRV.MAC.71, 28-Oct-78 12:31:13, EDIT BY MILLER
;ADD TTYAO4
;<4.MONITOR>TTYSRV.MAC.70, 27-Oct-78 15:23:41, Edit by MCLEAN
;RANDOM SPEEDUPS
;<4.MONITOR>TTYSRV.MAC.69, 27-Oct-78 15:11:12, Edit by MCLEAN
;MAKE DYNAMIC BLOCK CORRECT SIZE FOR NEW BINARY OUTPUT BUFFER ADDRESS
;<4.MONITOR>TTYSRV.MAC.68, 25-Oct-78 23:08:00, Edit by MCLEAN
;<4.MONITOR>TTYSRV.MAC.67, 25-Oct-78 14:29:00, Edit by MCLEAN
;CHANGE ALL THE PARAMETERS AS TO WHEN XOFF AND XON GET DONE.
;<2MCLEAN>TTYSRV.MAC.78, 18-Oct-78 23:11:00, Edit by MCLEAN
;<2MCLEAN>TTYSRV.MAC.77, 18-Oct-78 22:53:09, Edit by MCLEAN
;<2MCLEAN>TTYSRV.MAC.76, 13-Oct-78 16:13:25, Edit by MCLEAN
;<2MCLEAN>TTYSRV.MAC.75, 11-Oct-78 13:34:12, Edit by MCLEAN
;<2MCLEAN>TTYSRV.MAC.74, 10-Oct-78 23:34:51, Edit by MCLEAN
;MOVE TLTYP TO TTSAL1 SO HRRZ CAN BE USED IN FNXXX MACROS
;IT IS MUCH FASTER THAN A LDB INSTRUCTION...
;<2MCLEAN>TTYSRV.MAC.73, 8-Oct-78 21:56:38, Edit by MCLEAN
;<2MCLEAN>TTYSRV.MAC.72, 8-Oct-78 21:45:07, Edit by MCLEAN
;<2MCLEAN>TTYSRV.MAC.71, 8-Oct-78 21:29:24, Edit by MCLEAN
;<2MCLEAN>TTYSRV.MAC.70, 8-Oct-78 14:32:28, Edit by MCLEAN
;<2MCLEAN>TTYSRV.MAC.69, 7-Oct-78 22:24:08, Edit by MCLEAN
;<2MCLEAN>TTYSRV.MAC.68, 6-Oct-78 16:28:51, Edit by MCLEAN
;<2MCLEAN>TTYSRV.MAC.67, 5-Oct-78 23:34:01, Edit by MCLEAN
;<2MCLEAN>TTYSRV.MAC.66, 5-Oct-78 22:59:28, Edit by MCLEAN
;<2MCLEAN>TTYSRV.MAC.65, 3-Oct-78 23:43:15, Edit by MCLEAN
;<2MCLEAN>TTYSRV.MAC.64, 3-Oct-78 23:31:25, Edit by MCLEAN
;SPEEDUPS FOR OUTPUT
;<4.MONITOR>TTYSRV.MAC.65, 18-Oct-78 14:28:09, EDIT BY MURPHY
;PUT FF HANDLING MOSTLY BACK LIKE IT WAS
;<4.MONITOR>TTYSRV.MAC.64, 6-Oct-78 14:05:37, EDIT BY MILLER
;TCO 4.2034. DON'T DETACH CTY ON POWER-FAIL RECOVERY
;<4.MONITOR>TTYSRV.MAC.63, 7-Sep-78 18:02:01, Edit by LCAMPBELL
; Create new flavor of TTYSRV, TTYASM (2020T)
;<4.MONITOR>TTYSRV.MAC.62, 5-Sep-78 16:56:25, EDIT BY MURPHY
;RESET TPGPS ON INDICATED ^L
;<4.MONITOR>TTYSRV.MAC.61, 29-Aug-78 12:10:35, EDIT BY MILLER
;DON'T INIT TT%PGM ON IF LINE IS A PTY
;<4.MONITOR>TTYSRV.MAC.60, 22-Aug-78 12:58:55, EDIT BY JBORCHEK
;REMOVE SEARCH OF IMPPAR NOW IN TTNTDV
;<4.MONITOR>TTYSRV.MAC.59, 22-Aug-78 08:25:59, EDIT BY MILLER
;SWAP MEANINGS OF TT%PGM AND TTNXO. FIX UP HANDLING OF LINE COUUNTER
;<4.MONITOR>TTYSRV.MAC.58, 17-Aug-78 13:39:50, EDIT BY ENGEL
;FIX TTSFW (JUMPLE NEEDED A T1,)
;<4.MONITOR>TTYSRV.MAC.57, 15-Aug-78 10:46:26, Edit by ENGEL
;MAKE TTWAKE WAKE ONLY SEE LF AND NEVER CR
;<OSMAN>TTYSRV.MAC.1, 10-Aug-78 16:13:14, EDIT BY OSMAN
;ADD TTLINE, TTLMAX, CODE FOR .MORLC, .MOSLC, .MORLM, .MOSLM
;<4.MONITOR>TTYSRV.MAC.55, 27-Jul-78 09:13:52, EDIT BY MILLER
;CHECK TTXNO AT TTXOFF
;<4.MONITOR>TTYSRV.MAC.54, 27-Jul-78 07:48:39, EDIT BY MILLER
;FIX TTIDON CODE
;<4.MONITOR>TTYSRV.MAC.53, 26-Jul-78 18:43:57, EDIT BY MILLER
;ADD TTRXOB
;<4.MONITOR>TTYSRV.MAC.52, 24-Jul-78 10:51:57, Edit by ENGEL
;FIX TYPEOS AT TTSW1-1
;<4.MONITOR>TTYSRV.MAC.51, 23-Jul-78 14:50:55, EDIT BY MILLER
;FIX SOME TYPEOS
;<4.MONITOR>TTYSRV.MAC.50, 23-Jul-78 14:38:28, EDIT BY MILLER
;TCO 1951. ADD MTOPR SUPPORT CODE. ADD TTNXO BIT.
;<4.MONITOR>TTYSRV.MAC.49, 21-Jul-78 16:13:11, Edit by ENGEL
;FIX HORIZONTAL TAB PROBLEM FOR WAKE-UP CLASSES
;<4.MONITOR>TTYSRV.MAC.48, 21-Jul-78 13:58:24, Edit by ENGEL
;FIX TT%IGN BEING RETURNED ON RFMOD
;<4.MONITOR>TTYSRV.MAC.47, 18-Jul-78 16:25:29, EDIT BY MILLER
;CHECK FOR XON AND XOFF AS WITH OR WITHOUT PARITY
;<4.MONITOR>TTYSRV.MAC.46, 16-Jul-78 23:21:56, Edit by MCLEAN
;<4.MONITOR>TTYSRV.MAC.45, 16-Jul-78 22:47:52, Edit by MCLEAN
;<4.MONITOR>TTYSRV.MAC.44, 16-Jul-78 22:47:09, Edit by MCLEAN
;ADD GETOK FOR SETTING TERMINAL SPEEDS
;<3A.MONITOR>TTYSRV.MAC.43, 7-Jul-78 12:57:23, EDIT BY MILLER
;FIX TL12 TO RESTORE 5 ON FAILURE FROM CALL TO TL1C
;<2MCLEAN>TTYSRV.MAC.42, 28-Jun-78 01:13:28, Edit by MCLEAN
;FIX XOFF SO IT WILL OCCUR IMMEDIATELY
;<4.MONITOR>TTYSRV.MAC.41, 22-Jun-78 09:07:29, EDIT BY MILLER
;TCO 1924. SET TT%PGM IN STTYP JSYS IF APPROPRIATE
;<4.MONITOR>TTYSRV.MAC.40, 19-Jun-78 16:55:00, EDIT BY MURPHY
;<4.MONITOR>TTYSRV.MAC.39, 17-Jun-78 12:32:59, Edit by DBELL
;RANGE CHECK TERMINAL NUMBER IN TTMSG
;<3A.MONITOR>TTYSRV.MAC.42, 16-Jun-78 16:52:21, EDIT BY MILLER
;FIX BUG IN TCOU7 AFTER CALL TO ASGMSL
;<3A.MONITOR>TTYSRV.MAC.41, 15-Jun-78 11:56:21, EDIT BY MILLER
;ADD NOSKD1 AND OKSKD1 TO STRTOU
;<3A.MONITOR>TTYSRV.MAC.40, 14-Jun-78 13:53:11, EDIT BY MILLER
;PUT TTRLOB BACK AT TTYDEA. ADD CALL TO TTXON
;<4.MONITOR>TTYSRV.MAC.35, 9-Jun-78 14:16:10, EDIT BY MILLER
;PUT IN SAVELN AT TTEMES SO LINE NUMBER IS PRESERVED
;<4.MONITOR>TTYSRV.MAC.34, 9-Jun-78 11:11:09, EDIT BY MURPHY
;<3A.MONITOR>TTYSRV.MAC.37, 8-Jun-78 17:26:26, EDIT BY MURPHY
;TCO #1894 - QUEUE OF LINES TO START OUTPUT
;<4.MONITOR>TTYSRV.MAC.32, 6-Jun-78 01:33:58, Edit by JBORCHEK
;ADD SEARCH OF IMPPAR
;<3A.MONITOR>TTYSRV.MAC.36, 29-May-78 13:38:47, EDIT BY MILLER
;CALL TTCBF2 FROM TTYDEA INSTEAD OF CALL TTRLOB
;<4.MONITOR>TTYSRV.MAC.30, 18-May-78 13:40:02, EDIT BY MURPHY
;TCO #1911 - WAKEUP ALWAYS ON CR ON PTY
;<4.MONITOR>TTYSRV.MAC.29, 3-May-78 08:35:46, EDIT BY MILLER
;MORE FIX UPS TO TLINK
;<3A.MONITOR>TTYSRV.MAC.34, 3-May-78 08:33:03, EDIT BY MILLER
;FXI TLINK JSYS NEVER TO BLOCK WITH TTY LOCKED
;<4.MONITOR>TTYSRV.MAC.27, 2-May-78 14:54:32, EDIT BY MILLER
;DON'T NEED TO USE LINKF IN TTLNK3 ANYMORE
;<3A.MONITOR>TTYSRV.MAC.32, 24-Apr-78 08:36:19, EDIT BY MILLER
;MAKE SURE "LINK ECHOES" ARE GENERATED FOR HALF-DUPLEX LINES
;<4.MONITOR>TTYSRV.MAC.25, 22-Apr-78 15:52:47, Edit by BORCHEK
;SET UP TCJOB FOR NVT AT TTYAC4:
;<4.MONITOR>TTYSRV.MAC.24, 18-Apr-78 13:56:30, EDIT BY MURPHY
;<4.MONITOR>TTYSRV.MAC.23, 15-Apr-78 15:33:17, EDIT BY MILLER
;FIX HANDLING OF LINKF IN TTLNK3
;<3A.MONITOR>TTYSRV.MAC.29, 13-Apr-78 15:54:41, EDIT BY MURPHY
;TCO #1905 - FIX TTSTIH
;<4.MONITOR>TTYSRV.MAC.21, 5-Apr-78 16:11:11, EDIT BY MILLER
;REMOVE CHECK FOR TTLCK=0 IN TCI BLOCK ROUTINE
;<4.MONITOR>TTYSRV.MAC.20, 28-Mar-78 12:20:39, EDIT BY MILLER
;FXI TYPEO
;<3A.MONITOR>TTYSRV.MAC.26, 28-Mar-78 11:44:47, EDIT BY MILLER
;FIX UP CODE IN TTLNK3
;<4.MONITOR>TTYSRV.MAC.18, 27-Mar-78 18:23:24, EDIT BY MILLER
;FIX TTLNK3
;<3A.MONITOR>TTYSRV.MAC.24, 27-Mar-78 10:11:40, EDIT BY MILLER
;FIX TLINK NOT TO USE TTYDIS AND TTYAWK. REMOVE ROUTINES
;<4.MONITOR>TTYSRV.MAC.16, 26-Mar-78 14:38:41, EDIT BY MILLER
;CHECK FOR MESSAGE BLOCK AT CLENUP
;<4.MONITOR>TTYSRV.MAC.15, 26-Mar-78 14:32:57, EDIT BY MILLER
;FIX TYPEO
;<3A.MONITOR>TTYSRV.MAC.21, 26-Mar-78 13:11:43, EDIT BY MILLER
;FIX UP TTLNK3 TO UNLOCK TTY
;<3A.MONITOR>TTYSRV.MAC.20, 25-Mar-78 14:38:41, EDIT BY MILLER
;MORE FIX UPS
;<3A.MONITOR>TTYSRV.MAC.19, 25-Mar-78 13:43:00, EDIT BY MILLER
;MORE FIXES
;<3A.MONITOR>TTYSRV.MAC.18, 25-Mar-78 13:36:15, EDIT BY MILLER
;ALLOW TCOTST TO PROCEED WITHOUT TTY BEING LOCKED
;<4.MONITOR>TTYSRV.MAC.12, 23-Mar-78 07:55:38, EDIT BY MILLER
;CHECK FOR REQUEUE AT TTQAD
;<3.SM10-RELEASE-3>TTYSRV.MAC.9, 22-Mar-78 19:44:46, Edit by MCLEAN
;ADD TTXOC FOR 2020
;<3.SM10-RELEASE-3>TTYSRV.MAC.8, 22-Mar-78 19:38:24, Edit by MCLEAN
;<4.MONITOR>TTYSRV.MAC.10, 20-Mar-78 14:10:58, EDIT BY MILLER
;CHECK FOR SEND-ALL OR MESSAGE BLOCK AT TTSN10
;<4.MONITOR>TTYSRV.MAC.9, 9-Mar-78 09:34:49, Edit by ENGEL
;ADD SUPPORT FOR THE FULL WAKE 128-CHARACTER WAKE-UP MASK
;<4.MONITOR>TTYSRV.MAC.8, 2-Mar-78 17:49:26, EDIT BY MILLER
;GIVE TTDIBE A SKIP RETURN. +1 MEANS RETRY
;<3A.MONITOR>TTYSRV.MAC.11, 2-Mar-78 16:58:28, EDIT BY MILLER
;GIVE TTDOBE A SKIP RETURN. CALLERS MUST RETRY
;<3A.MONITOR>TTYSRV.MAC.9, 22-Feb-78 16:31:41, EDIT BY MILLER
;MAKE TTSTO BLOCK WITH TTY UNLOCKED. ADD SKIP RETURN FOR SUCCESS
;<4.MONITOR>TTYSRV.MAC.5, 22-Feb-78 08:19:01, EDIT BY MILLER
;FLUSH OUTPUT BUFFERS IN TSACT3 SCHEDULER TEST
;<4.MONITOR>TTYSRV.MAC.4, 21-Feb-78 08:42:38, EDIT BY MILLER
;CHANGE SETOBF TO USE FULL WORD TTBFRC DEFINITION
;<4.MONITOR>TTYSRV.MAC.3, 20-Feb-78 14:15:58, EDIT BY MILLER
;CHANGE TO STADYN IN TTSSPD TO CALL LCKTTY
;<4.MONITOR>TTYSRV.MAC.2, 20-Feb-78 10:29:50, EDIT BY MILLER
;FIX TYPEO IN SETOBF
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1976,1977,1978,1979,1980,1981,1982 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
SEARCH PROLOG
IFNDEF ARPAF,<ARPAF==0>
IFN KLFLG&<^-ARPAF>,<
TTITLE TTYSRV
SEARCH PROKL
>
IFN ARPAF&KLFLG,<
TTITLE TTYSRV,TTYSNV
SEARCH PROKL
>
IFN SMFLG&<^-ARPAF>,<
TTITLE TTYSRV,TTYSSM
SEARCH PROKS
>
IFN ARPAF&SMFLG,<
TTITLE TTYSRV,TTYASM
SEARCH PROKS
>
;TELETYPE SERVICE ROUTINES - D. MURPHY
SUBTTL DATA DEFINITIONS
;AC DEFINITIONS USED HEREIN
DEFAC (FX,Q3) ;FORK INDEX
;
; TTVTXX -- VECTOR TABLE FOR DATA AND ROUTINE OFFSETS INTO DEVICE
;SPECIFIC VECTOR
;
;TELETYPE SERVICE CONSISTS OF THIS MODULE - TTYSRV - WHICH CONTAINS ALL
;DEVICE-INDEPENDENT CODE, AND ONE MODULE FOR EACH LINE TYPE. THE
;LATTER MODULES CONTAIN ALL THE DEVICE-DEPENDENT CODE FOR THEIR LINE TYPE.
;EACH MODULE HAS A TRANSFER VECTOR OF THE NAME TTXXVT, WHERE XX IS
;UNIQUE FOR EACH LINE TYPE; THE MODULE NAME IS TTXXDV IF LINES OF THAT
;TYPE EXIST OR TTXXDM IF LINES OF THAT TYPE DO NOT EXIST.
;THE DEFINITIONS BELOW ARE THE OFFSETS INTO THOSE TRANSFER VECTORS
DDLEN==0 ;LENGTH OF DYNAMIC DATA FOR THIS TYPE
TT1LIN==1 ;FIRST LINE OF THIS TYPE/-1 NO LINES
VITBLS==2 ;INITIALIZE TABLES AT SYSTEM STARTUP
VACTLN==3 ;ACTIVATE LINES AT STARTUP OR RESTART
VCLOBF==4 ;CLEAR OUTPUT BUFFER
VSETSP==5 ;SET LINE SPEED
VGETSP==6 ;READ LINE SPEED
VSETTS==7 ;SET TERMINAL/NON-TERMINAL STATUS
VGETTS==10 ;READ TERMINAL/NON-TERMINAL STATUS
VSTO==11 ;STO JSYS
VSTPAR==12 ;STPAR JSYS
VCKPHY==13 ;CKPHYT - SEE IF PHYSICAL TERMINAL
VXON==14 ;PROCESS XON FROM TERMINAL
VDETDB==15 ;DEASIGN TTY DATA BASE
VOPAR==16 ;TCOUT - ADD PARITY TO CHARACTER
VSTOUT==17 ;START OUTPUT TO LINE
VSXOFF==20 ;SEND XOFF TO TERMINAL
VSXON==21 ;SEND XON TO TERMINAL
VTTCS==22 ;TTCH7 - PROCESS TTCS WORDS
VCON==23 ;HANDLE CARRIER/ON
VCOFF==24 ;HANDLE CARRIER/OFF
VHNGUP==25 ;HANGUP, REACTIVATE REMOTE LINE
VXOFF==26 ;PROCESS XOFF FROM TERMINAL
RNEWCC==27 ;HANDLE CTRL/C FROM INACTIVE LINE
VSTOBB==30 ;BIGSTO - STORE CHARACTER IN TTBBUF
VSNDCH==31 ;TTSND -SEND CHARACTER TO LINE
VDET==32 ;DETACH JOB ON THIS LINE
VBBOV==33 ;HANDLE OVERFLOW OF TTBBUF
VGCHBB==34 ;REMOVE CHARACTER FROM TTBBUF
VTTMSG==35 ;DO TTMSG FOR ONE LINE?
TSETDS==36 ;ENABLE/DISABLE DATASETS
VCKLIN==37 ;PERIODIC LINE DEVICE CHECK
VCLIBF==40 ;CLEAR INPUT BUFFER
VDOBE==41 ;DOBE
VHNGRY==42 ;INPUT GA
VSINIV==43 ;SET INIT. VALUES FOR A LINE
VSOBE==44 ;SOBE
VDOBET==45 ;WAKEUP IF OUTPUT BUFFER EMPTY
VSNDA1==46 ;SENDALL FOR ONE LINE
VSNDAL==47 ;SENDALL FOR ALL LINES
VAJWCL==50 ;ADJUST WAKEUP CLASS
VSTPLN==51 ;STOP LINE
VSFEXO==52 ;ENABLE/DISABLE FRONT-END XOFF RECOGNITION
TTVTMX==53 ;MAXIMUM NUMBER OF VECTOR ENTRIES
;VECTOR TABLE FOR DEVICE TYPES TO DEVICE SPECIFIC VECTORS
;INDEXED BY DEVICE TYPE
TTLINV: TTFEVT ;FE VECTOR TABLE
TTMCVT ;MCB VECTOR TABLE
TTPTVT ;PTY VECTOR TABLE
TTDCVT ;DC10 VECTOR TABLE
TTNTVT ;NETWORK VECTOR TABLE
TTDZVT ;DZ11 VECTOR TABLE
TTLINO=.-TTLINV
IFN <TTLINO-NLTYPS>,<PRINTX %% LINE TYPE TABLES OF INCORRECT LENGTH>
;TDCALL - MACRO TO DO THE DEVICE DEPENDENT SUBROUTINE CALLS.
;TDJRST - MACRO TO DO THE DEVICE DEPENDENT JUMPS
;TDXCT - MACRO TO DO THE DEVICE DEPENDENT XCTS
;
; CALLING SEQUENCE:
;
; FNXXXX S,VECTOR
; OR
; FNXXXX D,VECTOR
; WHERE
; S MEANS STATIC POINTER (LINE NUMBER) IN T2
; D MEANS DYNAMIC POINTER (BLOCK ADDRESS) IN T2
; VECTOR IS DEVICE VECTOR OFFSET
DEFINE TDCALL (PTYPE,VECTOR)<
IFIDN <PTYPE><S>,<
LOAD CX,TTSTY,(T2)
MOVE CX,TTLINV(CX)>
IFDIF <PTYPE><S>,<
LOAD CX,TLTYP,(T2)>
CALL @VECTOR(CX)>
DEFINE TDJRST (PTYPE,VECTOR)<
IFIDN <PTYPE><S>,<
LOAD CX,TTSTY,(T2)
MOVE CX,TTLINV(CX)>
IFDIF <PTYPE><S>,<
LOAD CX,TLTYP,(T2)>
JRST @VECTOR(CX)>
DEFINE TDXCT (PTYPE,VECTOR)<
IFIDN <PTYPE><S>,<
LOAD CX,TTSTY,(T2)
MOVE CX,TTLINV(CX)>
IFDIF <PTYPE><S>,<
LOAD CX,TLTYP,(T2)>
XCT VECTOR(CX)>
;SAVELN - MACRO TO SAVE AC2 UPON ENTRY TO A ROUTINE AND RESTORE
;IT UPON EXIT. USED TO SAVE INTERNAL LINE NUMBER OR ADDRESS OF DYNAMIC
;DATA BECAUSE CALLERS ASSUME IT IS PRESERVED
;NOTE THAT IF A ROUTINE HAS BOTH SAVELN AND STKVAR, THE SAVELN MUST
;COME FIRST
DEFINE SAVELN <
JSP CX,.SAVLN>
;.SAVLN - SUPPORT ROUTINE FOR SAVELN MACRO. PUTS AC 2 ON THE STACK
;AND CALLS THE ROUTINE THAT EXECUTED THE MACRO. WHEN THAT ROUTINE
;RETURNS, IT RETURNS TO THIS ROUTINE TO POP THE STACK AND RETURN TO THE
;ORIGINAL CALLER
RESCD
.SAVLN: PUSH P,T2 ;SAVE T2
CALL 0(CX) ;GO BACK INLINE
SKIPA ;NON-SKIP RETURN
AOS -1(P) ;SKIP RETURN
POP P,T2 ;RESTORE T2
RET
;MACRO TO GET STATIC LINE NUMBER FROM DYNAMIC DATA BASE.
;ASSUMES THAT T2/ ADDRESS OF DYNAMIC DATA
;PRESERVES ALL REGISTERS EXCEPT T2
DEFINE DYNST (AREG) <
IFB <AREG>,<LOAD T2,TINTL,(T2)> ;;SIMPLE PROCEDURE
IFNB <AREG>,<LOAD AREG,TINTL,(T2)> ;;FOR SPECIAL CASES
>
;STATIC STORAGE - ONE WORD PER DEFINED LINE, WHETHER ACTIVE OR NOT
;WORDS ARE ACTUALLY DEFINED IN STG
;RS TTSTAT,NLINES
TT%FEM==1B0 ;LINE IS REMOTE
TT%NTS==1B1 ;DON'T SEND SYSTEM MESSAGES
TT%FXO==1B2 ;LINE NEEDS XON
TT%CON==1B3 ;CARRIER IS ON
TT%FSP==1B4 ;LINE NEEDS SPEED SET
TT%FXF==1B5 ;LINE NEEDS XOF
TT%IGI==1B6 ;IGNORE INPUT WHEN LINE IS INACTIVE
TT%AUT==1B7 ;LINE IS AUTO-SPEED
TT%XOC==1B8 ;LINE NEEDS XON/XOFF CHARACTER (2020)
TT%FPK==1B8 ; WAITING FOR FE POST (KL)
TT%ABW==1B9 ;[1820] LINE IS IN AUTOBAUD WAIT (2020)
TT%CRW==1B10 ;[1820] LINE IS IN CARRIER WAIT (2020)
TT%LSP==1B11 ;[7245] Use low speed autobaud table
TT%INC==1B12 ;[7245] Ignore next character
TT%ORG==1B13 ;[8883] Old ring (ring at last scan) (2020)
MSKSTR TTFEM,TTSTAT,TT%FEM
MSKSTR TTNTS,TTSTAT,TT%NTS
MSKSTR TTFXO,TTSTAT,TT%FXO
MSKSTR TTCON,TTSTAT,TT%CON
MSKSTR TTFSP,TTSTAT,TT%FSP
MSKSTR TTFXF,TTSTAT,TT%FXF
MSKSTR TTIGI,TTSTAT,TT%IGI ;IGNORE INPUT WHEN LINE IS INACTIVE
MSKSTR TTAUT,TTSTAT,TT%AUT ;LINE IS AUTO-SPEED
MSKSTR TTXOC,TTSTAT,TT%XOC ;LINE NEEDS XON/XOFF CHARACTER OUTPUT
MSKSTR TTFPK,TTSTAT,TT%FPK ; FE TO POST
MSKSTR TTABW,TTSTAT,TT%ABW ;[1820] LINE IS IN AUTOBAUD WAIT (2020)
MSKSTR TTCRW,TTSTAT,TT%CRW ;[1820] LINE IS IN CARRIER WAIT (2020)
MSKSTR TTLSP,TTSTAT,TT%LSP ;[7245] Use low speed autobaud table
MSKSTR TTINC,TTSTAT,TT%INC ;[7245] Ignore next character (autobaud)
MSKSTR TTORG,TTSTAT,TT%ORG ;[8883] Old value of RING
DEFSTR TTXCN,TTSTAT,13,4 ;[8883] Count of XOFF's requested (KL only)
DEFSTR TTSTY,TTSTAT,17,3 ;LINE TYPE
DEFSTR TSFMC,TTSTAT,27,8 ;MAX COUNT FOR FRONT END BUFFER
DEFSTR TTFBB,TTSTAT,35,8 ;NUMBER OF ENTRIES IN TTBBUF
;RS TTSPWD,NLINES ;(INPUT SPEED,,OUTPUT SPEED
;RS TTACTL,NLINES ;ADDRESS OF DYNAMIC DATA IF ACTIVE
; OR -1 IF BECOMING ACTIVE
; OR 0 IF INACTIVE
;RS TTCSAD,NLINES ;ADDRESS OF ROUTINE FOR SCHEDULER TO CALL
DEFSTR TTIME,TTCSTM,35,36
;RS TTCSTM,NLINES ;TIME FOR SCHEDULER TO CALL ROUTINE
DEFSTR TROUT,TTCSAD,35,36
;OFFSETS IN DYNAMIC DATA
TTFLG1==:0 ;[1973] FLAGS WORD
TT%SAL==:1B0 ;[1973] SENDALL BEING DONE TO THIS LINE
TT%SHT==1B1 ;THIS IS A SHORT BLOCK
TT%MES==1B2 ;THIS IS A SYSTEM MESSAGE BLOCK
TT%OTP==1B3 ;OUTPUT IS ENROUTE TO THE LINE
TT%FWK==1B4 ;FORCED WAKEUP
TT%SFG==1B5 ;CTRL/S WAS TYPED
TT%RFG==1B6 ;REPEAT LAST CHARACTER (BKJFN)
TT%WFG==1B7 ;BLOCKED ON INPUT
TT%PRM==1B8 ;DON'T DEALLOCATE DYNAMIC DATA
TT%BAC==1B9 ;PERMANENT AND BECOMING ACTIVE
TT%NXO==1B10 ;IF ZERO, NO PAGE OUTPUT STOP
TT%BKO==1B11 ;FORK BLOCKED FOR OUTPUT EVENT ON THIS LINE
TT%LCK==77B35 ;COUNT OF LOCKS ON THIS BLOCK
MSKSTR TTSAL,TTFLG1,TT%SAL
MSKSTR TTSHT,TTFLG1,TT%SHT
MSKSTR TTMES,TTFLG1,TT%MES
MSKSTR TTOTP,TTFLG1,TT%OTP
MSKSTR TTFWK,TTFLG1,TT%FWK
MSKSTR TTSFG,TTFLG1,TT%SFG
MSKSTR TTRFG,TTFLG1,TT%RFG
MSKSTR TTWFG,TTFLG1,TT%WFG
MSKSTR TTPRM,TTFLG1,TT%PRM
MSKSTR TTBAC,TTFLG1,TT%BAC
MSKSTR TTNXO,TTFLG1,TT%NXO
MSKSTR TTBKO,TTFLG1,TT%BKO
MSKSTR TTLCK,TTFLG1,TT%LCK
TTDAT1==1
DEFSTR TTOMX,TTDAT1,8,1 ;[2637] EXTRA BUFFERS IN USE
DEFSTR TTOCN,TTDAT1,7,3 ;[2637] COUNT OF EXTRA BUFFERS
DEFSTR TTTYP,TTDAT1,17,9 ;TERMINAL TYPE
DEFSTR TINTL,TTDAT1,35,18 ;INTERNAL LINE NUMBER (INDEX INTO STATIC DATA)
TTSAL1==2
DEFSTR TSALC,TTSAL1,17,18 ;SENDALL CHARACTER COUNT
DEFSTR TLTYP,TTSAL1,35,18 ;DEVICE DISPATCH VECTOR ADDRESS
TTSAL2==3
DEFSTR TSALP,TTSAL2,35,36 ;SENDALL BYTE POINTER
TTDEV==4
;DEVICE DEPENDET WORD SEE DEVICE MODULES FOR DEFINITIONS
TTBFRC==5
DEFSTR TOWRN,TTBFRC,7,8 ;COUNT IN OUPUT BUFFER FOR WAKEUP
DEFSTR TTNIN,TTBFRC,11,4 ;NO. INPUT BUFFERS
DEFSTR TTNOU,TTBFRC,15,4 ;NUMBER OUTPUT BUFFERS
DEFSTR TIMAX,TTBFRC,25,10 ;MAX BYTES IN INPUT BUFFER
DEFSTR TOMAX,TTBFRC,35,10 ;MAX BYTES IN OUTPUT BUFFER
TTOCT==6 ;NUMBER CHARACTERS IN OUTPUT BUFFER
TTOOUT==7 ;POINTER FOR REMOVING CHAR FROM OUTPUT BUFFER
TTOIN==10 ;POINTER FOR ENTERING CHAR INTO OUTPUT BUFFER
TTDAT2==11
DEFSTR TYLMD,TTDAT2,8,2 ;TERMINAL DATA MODE FOR LAST INPUT CHAR
DEFSTR TYLCH,TTDAT2,17,9 ;LAST CHAR REMOVED FROM INPUT BUFFER
DEFSTR TPWID,TTDAT2,26,9 ;PAGE WIDTH
TTICT==12 ;NUMBER CHARACTERS IN INPUT BUFFER
TTIOUT==13 ;POINTER FOR REMOVING CHAR FROM INPUT BUFFER
TTIIN==14 ;POINTER FOR ENTERING CHAR INTO INPUT BUFFER
FCMOD1==15 ;CONTROL CHARACTER OUTPUT CONTROL WORDS
FCMOD2==16 ; (2 BITS PER CHARACTER)
;POSSIBLE VALUES FOR EACH CHARACTER
CCNONE==0 ;SEND NOTHING
CCIND==1 ;INDICATE VIA ^
CCSEND==2 ;SEND ACTUAL CODE
CCSIM==3 ;SIMULATE FORMAT ACTION
TTDPSI==17 ;BIT FOR TERMINAL CODE SET IF DEFERRED INTERRUPT
TTPSI==20 ;BIT FOR TERMINAL CODE SET IF INTERRUPT
TTLINK==21 ;LINES LINKED TO (9 BITS PER LINE)
TTLPOS==22
DEFSTR TPGPS,TTLPOS,17,18 ;CURRENT LINE POSITION WITHIN PAGE
DEFSTR TLNPS,TTLPOS,35,18 ;CURRENT CHARACTER POSITION WITHIN LINE
TTFLGS==23
MSKSTR TTDUM,TTFLGS,TT%DUM ;[2926] DUPLEX MODE
MSKSTR TOFLG,TTFLGS,TT%OSP ;CTRL/O WAS TYPED
DEFSTR TPLEN,TTFLGS,17,8 ;PAGE LENGTH
;(BITS ARE DEFINED IN MONSYM AS JFN MODE WORD)
TTFORK==24
DEFSTR TCJOB,TTFORK,17,18 ;CONTROLLING JOB NUMBER
DEFSTR TWFRK,TTFORK,35,18 ;NUMBER OF FORK IN INPUT WAIT ON THIS LINE
TTFRK1==25
DEFSTR TTPFK,TTFRK1,35,18 ;FORK WHICH IS TOP FORK OF A SCTTY TREE
;-1 IF NONE
DEFSTR TTPSFK,TTFRK1,17,18 ;PSI FORK FOR NON CONTROL TTY PSI'S
TTCHR1==26 ;WAKE UP CHARACTER MASK (ASCII CODES 0-31.)
TTCHR2==27 ;WAKE UP CHARACTER MASK (ASCII CODES 32.-63.)
TTCHR3==30 ;WAKE UP CHARACTER MASK (ASCII CODES 64.-95.)
TTCHR4==31 ;WAKE UP CHARACTER MASK (ASCII CODES 96.-127.)
; ** TTCHR1,TTCHR2,TTCHR3 AND TTCHR4 SHOULD REMAIN TOGETHER IN THAT ORDER
TTFWTH==32 ;WAKE UP FIELD WIDTH BYTE COUNT
DEFSTR TTIPSI,TTFWTH,11,6 ;INPUT PSI LEVEL
DEFSTR TTOPSI,TTFWTH,17,6 ;OUPUT PSI LEVEL
DEFSTR TTFCNT,TTFWTH,35,18 ;BYTE COUNT FOR WAKE-UP (0=DISABLED FOR WAKE UP)
TTLINE==33 ;LINE COUNTER
TTLMAX==34 ;MAXIMUM OF TTLINE
;LENGTHS OF DYNAMIC BLOCKS
TTDDLN==35 ;DEFAULT DYNAMIC DATA SIZE
MSGLEN==11 ;SIZE OF MESSAGE BLOCK
SHTLEN==5 ;SIZE OF SHORT (SENDALL) BLOCK
;FIELDS OF JFN MODE WORD AS DEFINED IN MONSYM
REPEAT 0,<
TT%OSP==:1B0 ;OUTPUT SUPPRESS
TT%MFF==:1B1 ;MECHANICAL FORMFEED PRESENT
TT%TAB==:1B2 ;MECHANICAL TAB PRESENT
TT%LCA==:1B3 ;LOWER CASE CAPABILITIES PRESENT
TT%LEN==:177B10 ;PAGE LENGTH
TT%WID==:177B17 ;PAGE WIDTH
TT%WAK==:17B23 ;WAKEUP FIELD
TT%WK0==:1B18 ;WAKEUP CLASS 0 (UNUSED)
TT%IGN==:1B19 ;IGNORE THE TT%WAK BITS ON SFMOD
TT%WKF==:1B20 ;WAKEUP ON FORMATING CONTROL CHARS
TT%WKN==:1B21 ;WAKEUP ON NON-FORMATTING CONTROLS
TT%WKP==:1B22 ;WAKEUP ON PUNCTUATION
TT%WKA==:1B23 ;WAKEUP ON ALPHANUMERICS
TT%ECO==:1B24 ;ECHOS ON
TT%ECM==:1B25 ;ECHO MODE
TT%ALK==:1B26 ;ALLOW LINKS
TT%AAD==:1B27 ;ALLOW ADVICE (NOT IMPLEMENTED)
TT%DAM==:3B29 ;DATA MODE
.TTBIN==:0 ;BINARY
.TTASC==:1 ;ASCII
.TTATO==:2 ;ASCII AND TRANSLATE OUTPUT ONLY
.TTATE==:3 ;ASCII AND TRANSLATE ECHOS ONLY
TT%UOC==:1B30 ;UPPER CASE OUTPUT CONTROL
TT%LIC==:1B31 ;LOWER CASE INPUT CONTROL
TT%DUM==:3B33 ;DUPLEX MODE
.TTFDX==:0 ;FULL DUPLEX
.TT0DX==:1 ;NOT USED, RESERVED
.TTHDX==:2 ;HALF DUPLEX (CHARACTER)
.TTLDX==:3 ;LINE HALF DUPLEX
TT%PGM==:1B34 ;PAGE MODE
TT%CAR==:1B35 ;CARRIER STATE
>
;LOCAL PARAMETERS
MXFECC==50 ;MAX CHARACTERS FOR A FE LINE IN -11
;FIELDS IN TTBBUF
DLSRCF==:400 ;DLS RECEIVER FLAG, DATAI WORD
TTNCF==1B19 ;FLAG - CHARACTER CAME FROM NETWORK
REPEAT 0,<
TTSCF==1B20 ;FLAG - CHARACTER CAME FROM STI
>
TTPIRQ==1B23 ;OUTPUT INTERRUPT REQUEST (SOFTWARE)
TTOIRQ==1B24 ;OUTPUT INTERRUPT REQUEST (SOFTWARE)
DLSCXF==:1B25 ;CARRIER XITION FLAG (SOFTWARE)
CARONB==:1B33
TTXECO==1B27 ;INPUT STREAM - CHARACTER ALREADY ECHOED
MAXBBC==^D20 ;MAX ENTRIES ALLOWED IN BIGBUF FOR THIS
; LINE
MXBBC1==5 ;WHEN AN X-ON IS ALLOWED AGAIN
MAXABC==TTBSIZ/2 ;WHEN LINE IS SHUT OFF
XOFFC=="S"-100 ;THE X-OFF CODE (TO SEND)
XONC=="Q"-100 ;THE X-ON CODE (TO SEND)
MINICT==30 ;WHEN TO SEND AN X-OFF
MINCT1==MINICT+10 ;WHEN TO FORCE WAKEUP BEFORE XOFF
MINXON==20 ;WHERE TO SEND XON
TTLIND=="'" ;UPPER CASE INDICATION CHARACTER FOR OUTPUT
TTCIND=="^" ;CONTROL INDICATION CHARACTER FOR OUTPUT
TTFILL==0 ;FILLER CHARACTER
PGMONC=="Q"-100 ;XON - RESTART OUTPUT IN PAGE MODE (RECEIVED)
PGMOFC=="S"-100 ;XOFF - STOP OUTPUT IN PAGE MODE (RECEIVED)
TTOESC==400 ;FUNCTION ESCAPE IN OUTPUT STREAM
TTOPFC==420 ;PAGE FULL CODE IN OUTPUT STREAM
TABSIZ==:^D8 ;STANDARD TAB SPACING
DFLWID==1 ;OLD STYLE DEFAULT WIDTH
DFLLEN==1 ;OLD STYLE DEFAULT LENGTH
LOWSPD==^D600 ;HIGHEST SPEED WHERE NTTBL SUFFICES
RESCD
;INDEX TO DEV TABLES FOR TTY0
DEVTT0:: DVXTT0
;USUAL DEVICE FLAGS AND STATUS
; 66 LINES/PAGE, 75 CHARS/LINE
; WAKEUP ON ALL, ECHO MODE 2 (DEFERRED OR IMMED)
; DATA MODE ASCII, 'RAISE' LC INPUT (ALSO CONVERTS OLD-STYLE ALT-MODES)
NORMTF::^D66B10+^D72B17+17B23+2B25+TT%ALK+1B29+1B31+TT%PGM
NORMTY:: ^D8 ;NORMAL TERMINAL TYPE
TAB81:: EXP 1B0+1B8+1B16+1B24+1B32
TAB82:: EXP 1B4+1B12+1B20+1B28
TAB83: EXP 1B0+1B8+1B16+1B24+1B32
;NORMAL CONTROL CHARACTER SETTINGS
TTICB1::BYTE (2) 0,1,1,1,1,1,1,2,1,2,3,1,1,2,1,1,1,1
TTICB2::BYTE (2) 1,1,1,1,1,1,1,1,1,3,1,1,1,1
; DEFAULT DEFINITIONS FOR TERMINAL WAKE-UP
TTWKDF: EXP -20 ;WAKE-UP ON ALL CHARACTERS
EXP -20
EXP -20
EXP -20
;POINTERS TO TERMINAL TYPE FIELDS
;ASSUME TYPE NUMBER IN 3
TTMBIT: POINT 3,TTYPE0(3),2 ;MECHANICAL BITS
TTCRPD: POINT 4,TTYPE0(3),7 ;CR PADDING FOR FULL LINE
TTLFPD: POINT 4,TTYPE0(3),11 ;LF PADDING FOR ONE LINE
TTTBPD: POINT 4,TTYPE0(3),15 ;TAB PAD FOR 4 SPACES
TTFFPD: POINT 4,TTYPE0(3),19 ;FF PAD FOR FULL PAGE
TTTWID: POINT 8,TTYPE0(3),27 ;WIDTH OF LINE
TTTLEN: POINT 8,TTYPE0(3),35 ;LENGTH OF PAGE
SCNTIM==^D1000 ;CONTROLLER CHECK INTERVAL (1 SEC)
SUBTTL ONCE-ONLY INITIALIZATION
;INITIALIZATION. CALLED FROM STG AT SYSTEM STARTUP
RESCD ;MUST BE RESIDENT
;INITIALIZE CHAIN OF LINE BUFFERS. LINE BUFFERS ARE OF SIZE TTSIZ.
;THIS CODE MAKES WORD 0 OF BUFFER N CONTAIN THE ADDRESS OF BUFFER N-1
;AND TTFREB CONTAIN THE ADDRESS OF THE HIGHEST-NUMBERED BUFFER
TTINIT::MOVEI T1,SCNTIM ;TIME FOR NEXT SCAN
MOVEM T1,TTYTIM ;STASH IT
MOVEI 1,TTBUFS ;COMPUTE BEGINNING OF BUFFERS
SETOM TTQCNT ;INIT SCAN COUNT
TRNE 1,TTSIZ-2 ; TO BE N*TTSIZ+1
ADDI 1,TTSIZ ;FIRST WORD IN BUFFER AREA
ANDCMI 1,TTSIZ-1 ;WHICH IS 0 MOD TTSIZ
ADDI 1,1 ;SUCH THAT EACH BUFFER ENDS 0 MOD ADR
SETZM SNDALL ;FREE SEND ALL BUFFER
MOVEI 2,NTTBF
MOVEM 2,TTFREC ;FREE BUFFER COUNT
SUBI 2,1
MOVEM 1,TTSIZ(1) ;CONSTRUCT LIST OF FREE BUFFERS
ADDI 1,TTSIZ
SOJG 2,.-2
MOVEM 1,TTFREB ;FREE BUFFER LIST
;INITIALIZE THE STATIC DATA FOR ALL LINES. TTSPWD IS DONE BY DTEINI
MOVEI T1,NLINES ;DO ALL LINES
SETZ T2, ;START WITH LINE 0
TTINI1: SETZM TTSTAT(T2) ;CLEAR STATUS WORD
MOVEI T3,MXFECC ;GET DEFAULT LINE ALLOCATION
STOR T3,TSFMC,(T2) ; AND SAVE IT FOR THIS LINE
SETZM TTACTL(T2) ;NO DYNAMIC DATA YET
AOS T2 ;GO TO NEXT LINE
SOJG T1,TTINI1 ; UNTIL ALL LINES ARE DONE
;..
;THIS CODE ESTABLISHES THE TYPE OF EACH LINE. LINES OF A TYPE ARE ASSIGNED
;CONSECUTIVELY, STARTING WITH LINES THAT ARE LOCAL TO THE MACHINE. THIS
;CODE STORES THE LINE TYPE WITH THE LINE AND SETS UP TT1LIN IN THE
;VECTOR TO CONTAIN THE NUMBER OF THE FIRST LINE.
;..
MOVEI T2,0 ;T2/ FIRST LINE IS LINE 0
MOVEI T3,TT.FE ;T3/ CODE FOR FRONT-END LINES
MOVEI T4,NTTFE ;T4/ NUMBER OF FRONT END LINES
CALL SETTYP
MOVEI T3,TT.DZ ;T3/ CODE FOR DZ11 LINES
MOVEI T4,NTTDZ ;T4/ NUMBER OF DZ11 LINES
CALL SETTYP
MOVEI T3,TT.MCB ;T3/ CODE FOR MCB LINES
MOVEI T4,NTTMCB ;T4/ NUMBER OF MCB LINES
CALL SETTYP
MOVEI T3,TT.PTY ;T3/ CODE FOR PSEUDO-TERMINALS
MOVEI T4,NTTPTY ;T4/ NUMBER OF PTY'S
CALL SETTYP
MOVEI T3,TT.NVT ;T3/ CODE FOR ARPANET LINES
HRLI T4,-NTTNVT ;SET UP NVT PAR WITH -NTTNVT,,FIRST NVT
HRR T4,T2 ;GET FIRST NVT
MOVEM T4,NVTPTR ;STORE IT AWAY
MOVEI T4,NTTNVT ;T4/ NUMBER OF ARPANET LINES
CALL SETTYP
;INITIALIZE POINTERS TO TTBBUF
SETZM TTBIGO
SETZM TTBIGC
SETZM TTBIGI
SETZM TTCQLN ;INITIALIZE FOR TTHNG4
PUSH P,Q1 ;SAVE A COUNTER REGISTER
PUSH P,Q2 ;SAVE ANOTHER REGISTER
MOVEI Q1,NLTYPS ;FIND NUMBER OF LINE TYPES
TYINLP: MOVE Q2,TTLINV-1(Q1) ;FIND VECTOR
CALL @VITBLS(Q2) ;GO INIT L INES ;INITIALIZE TABLES AT SYSTEM STARTUP
SOJG Q1,TYINLP ;DO ALL TYPES
POP P,Q2
POP P,Q1 ;RESTORE
CALLRET TTSTRT
;SETTYP - SET THE TERMINAL TYPE FOR A GROUP OF LINES
;ACCEPTS:
; T2/ CURRENT LINE NUMBER (FIRST FOR THIS TYPE)
; T3/ LINE TYPE
; T4/ NUMBER OF LINES OF THIS TYPE
; CALL SETTYP
;RETURNS +1: ALWAYS
; T2/ UPDATED LINE NUMBER (FIRST LINE OF NEXT TYPE)
SETTYP: MOVE T1,TTLINV(T3) ;POINT TO VECTOR TABLE ENTRY
JUMPG T4,SETTY2 ;IF NO LINES OF THIS TYPE,
SETOM TT1LIN(T1) ;SET FIRST LINE TO -1
RET ; AND RETURN
SETTY2: MOVEM T2,TT1LIN(T1) ;STORE FIRST LINE FOR THIS TYPE
SETTY1: STOR T3,TTSTY,(T2) ;SAVE LINE TYPE FOR THIS LINE
AOS T2 ;NEXT LINE NUMBER
SOJG T4,SETTY1 ;GO DO THE NEXT LINE IN THIS TYPE
CAMN T3,CTYTYP ;IS THIS THE LINE TYPE FOR THE CTY?
JRST [ CALL INICTY ;YES. INITIALIZE IT
AOS T2 ;POINT TO NEXT LINE
RET]
RET
;INICTY - INITIALIZE THE CTY
;ACCEPTS:
; T1/ ADDRESS OF LINE TYPE VECTOR TABLE
; T2/ INTERNAL LINE NUMBER
; T3/ LINE TYPE
; CALL INICTY
;RETURNS +1: ALWAYS
;CTY IS A SPECIAL CASE. IT IS ALWAYS LINE 'CTYLNO', AND ITS DYNAMIC DATA
;IS PERMANENTLY ALLOCATED. CTYUNT AND CTYINT WILL BE FIXED BY IDCTY.
INICTY: SAVET
MOVEM T2,CTYLNO ;SAVE INTERNAL LINE NUMBER
SETOM CTYINT ;INITIALIZE INTERNAL EQUIVALENT OF ACTUAL
; CTY LINE ON .FEDLS DEVICE
HRR T1,DDLEN(T1) ; AND FULL LENGTH BLOCK
HRLI T1,.RESP1 ;INDICATE NOT SWAPPABLE
MOVEI T2,.RESTP
CALL ASGRES ;GET RESIDENT SPACE
BUG(NOCTY)
MOVE T2,CTYLNO ;T2/ LINE NUMBER, T1/ ADDRESS OF BLOCK
MOVE T3,CTYTYP ;INDICATE LINE TYPE
STOR T3,TTSTY,(T2)
CALL TTSETL ;SET INITIAL VALUES IN DYNAMIC DATA
SETONE TTPRM,(T1) ;DON'T DEALLOCATE THIS DYNAMIC DATA
MOVEM T1,TTACTL(T2) ;POINT TO DYNAMIC DATA
RET
;TTSET - SET INITIAL VALUES FOR A LINE
;ACCEPTS:
; T1/ ADDRESS OF DYNAMIC DATA
; T2/ LINE NUMBER
;CALL TTSET
;RETURNS +1: ALWAYS
; * * * *
;NEEDS WORK - CAN'T INIT TOO MANY WORDS
; * * * *
TTSETL: LOAD T4,TTSTY,(T2) ;GET THE LINE TYPE
MOVE T4,TTLINV(T4) ;GET ADDRESS OF VETOR TABLE
MOVE T4,DDLEN(T4) ;GET LONG BLOCK LENGTH
JRST TTSET
TTSETM: MOVEI T4,MSGLEN ;INDICATE MESSAGE BLOCK
JRST TTSET
TTSETS: MOVEI T4,SHTLEN ;INDICATE SENDALL BLOCK
JRST TTSET
TTSET: SAVEQ
TDJRST S,VSINIV ;SET INIT. VALUES FOR A LINE
;ALL INITIALIZATION ROUTINES SHOULD EXIT THRU HERE
TTSET1: LOAD T3,TTSTY,(T2) ;GET LINE TYPE FROM STATIC
MOVE T3,TTLINV(T3) ;CORRESPONDING VECTOR ADDRESS
STOR T3,TLTYP,(T1) ; AND COPY TO DYNAMIC
MOVE Q1,NORMTY ;GET NORMAL TERMINAL TYPE
STOR Q1,TTTYP,(T1) ;SET IN DYNAMIC DATA
STOR T2,TINTL,(T1) ;MAKE DYNAMIC DATA POINT TO STATIC
CAIN T4,SHTLEN ;IS THIS A SENDALL BLOCK?
RET ;YES. NO MORE INITIAILIZATION
MOVE T3,IBFRC ;GET DEFAULT BUFFER CONTROL
MOVEM T3,TTBFRC(T1) ; AND STORE IN DYNAMIC DATA
CAIN T4,MSGLEN ;IS THIS A MESSAGE-LENGTH BLOCK?
RET ;YES. NO MORE INITIALIZATION
CAME T2,CTYLNO ;CTY ASSIGN?
CALL SETOBF ;NO, SET OUTPUT BUFFER COUNTS
SETZRO TTLSP,(T2) ;[7245] Clear autobaud speed flag
SETZRO TTINC,(T2) ;[7245] Clear ignoring char (autobaud only)
SETONE TTIPSI,(T1) ;SET NO PSI
SETONE TTOPSI,(T1) ;INPUT OR OUTPUT
SETONE TTPSFK,(T1) ;AND NO FORK
MOVE Q1,TTICB1 ;SETUP USUAL CONTROL CHARACTER MODES
MOVEM Q1,FCMOD1(T1)
MOVE Q1,TTICB2
MOVEM Q1,FCMOD2(T1)
SETOM TTLINK(T1) ;NO LINKS TO OTHER LINES
MOVE Q1,NORMTF ;USUAL DEVICE FLAGS AND STATUS
CAMN T2,CTYLNO ;Assigning CTY?
TXZ Q1,TT%ALK ;Yes - disallow TALK links
LOAD T3,TTSTY,(T2) ;GET TYPE OF LINE AGAIN
CAIN T3,TT.PTY ;IS IT A PTY?
TXZ Q1,TT%PGM ;YES. NO XON/XOFF THEN
LOAD T3,TT%WID,Q1 ;GET STANDARD WIDTH
LOAD T4,TT%LEN,Q1 ;GET LENGTH
SETZRO <TT%WID,TT%LEN>,Q1 ;CLEAR OUT THESE VALUES
DPB Q1,[POINT 35,TTFLGS(T1),35] ;STORE STANDARD VALUES IN DYNAMIC DATA
PUSH P,T2 ;SAVE
MOVE T2,T1
TDCALL D,VSFEXO ;START WITH XOFF IN CORRECT DIRECTION ;ENABLE/DISABLE FRONT-END XOFF RECOGNITION
STOR T3,TPWID,(T2) ;SET UP STANDARD WIDTH
STOR T4,TPLEN,(T2) ;STORE PAGE LENGTH
SETONE TWFRK,(T2) ;INDICATE NO FORK WAITING
MOVE Q1,JOBNO ;GET THIS JOB NUMBER
STOR Q1,TCJOB,(T2) ;INDICATE THAT IT OWNS THE TERMINAL
SETONE TTPFK,(T2) ;NO SCTTY FORK YET
XMOVEI T1,TTWKDF ;POINT TO DEFAULT 4-WORD MASK
CALL TTSBM ;GO SET IT
SETZ T1, ;TURN OFF FIELD WIDTH
CALL TTSFW
MOVE T1,T2 ;RESTORE T1
POP P,T2 ;RESTORE T2
RET
;TTSTRT - ACTIVATE ALL LINES. USED ON RESTART AS WELL AS START
TTSTRT: SETZM TTHNGT
SETZM TTHNGN
SAVEQ ;SAVE REGISTERS
MOVEI Q1,NLTYPS ;GET THE COUNT OF TYPES
TYRSLP: MOVE Q2,TTLINV-1(Q1) ;FIND VECTOR
CALL @VACTLN(Q2) ;RESTART ;ACTIVATE LINES AT STARTUP OR RESTART
SOJG Q1,TYRSLP ;DO ALL LINES
RET
;TTRSET - RESUME RUNNING TTY'S AFTER POWER FAILURE
;* * * *
;DON'T DO THIS FOR FE LINES. MAYBE REMOVE ALL OF IT
; * * * *
;THIS CODE HANDLES ALL LINES. IN FACT, NON-PHYSICAL LINES WON'T HAVE
;TTOTP SET, SO TTSND0 WILL NOT BE CALLED FOR THEM
TTRSET::
MOVSI 2,-NLINES ;DO ALL LINES
TTRST1: PUSH P,T2 ;SAVE LINE NUMBER
CALL STADYN ;IS LINE ACTIVE?
JUMPLE T2,TTRST2 ;NOT AT ALL
JE TTOTP,(T2),TTRST2 ;ACTIVE IN SOME WAY. WAS OUTPUT IN PROGRESS?
CALL TTSND0 ;YES, RESTART IT
TTRST2: POP P,T2 ;RESTORE COUNTER AND LINE NUMBER
AOBJN 2,TTRST1
CALLRET TTSTRT ;ACTIVATE DATASETS, ETC.
;THE FOLLOWING ROUTINES PROVIDE THE MECHANISM FOR INSURING THAT A LINE
;REMAINS ACTIVE (AND THUS THE ADDRESS OF ITS DYNAMIC DATA REMAINS VALID)
;WHILE ITS DYNAMIC DATA IS BEING USED. TO ADDRESS A LINE'S DYNAMIC DATA
;FROM PROCESS CONTEXT, DO THE FOLLOWING:
;1. CALL LCKTTY, WHICH WILL INCREMENT THE LOCK COUNT IN THE LINE'S DYNAMIC
;DATA AND RETURN NOINT.
;2. IF A DISMISS MUST BE DONE, CALL TTYDIS, WHICH WILL PLACE AN ENTRY ON THE
;JOB'S JSB STACK AND GO OKINT. AT THIS POINT THE USER CAN CTRL/C, IN
;WHICH CASE THE PROCESSING OF THE JSB STACK WILL DECREMENT THE LINE'S
;LOCK COUNT.
;3. WHEN THE DISMISS COMPLETES, CALL TTYAWK, WHICH WILL REMOVE THE STACK
;ENTRY AND RETURN NOINT
;4. WHEN THE DYNAMIC DATA IS NOT LONGER NEEDED, CALL ULKTTY, WHICH WILL
;DECREMENT THE LOCK COUNT AND RETURN OKINT.
;WHEN ADDRESSING DYNAMIC DATA FROM SCHEDULER CONTEXT, CALLING LCKTTY
;AND ULKTTY IS LEGAL BUT DOES NOT INCREMENT THE COUNT. IT IS ASSUMED
;THAT THE DYMAMIC DATA WILL NOT DISAPPEAR WHILE THE SCHEDULER IS RUNNING.
;THEREFORE, CALLING STADYN WILL HAVE THE SAME EFFECT; I.E. CONVERTING
;LINE NUMBER TO ADDRESS OF DYNAMIC DATA
;IF THE DYNAMIC DATA IS TO BE ADDRESSED OVER A VERY SHORT PERIOD, THE
;CALLER CAN GO NOSKED, CALL STADYN, ADDRESS THE DATA, AND THEN GO
;OKSKED
SUBTTL LINE NUMBER/ADDRESS CONVERSION
;STADYN - CONVERT STATIC LINE NUMBER TO DYNAMIC ADDRESS
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL STADYN
;RETURNS +1: LINE DOES NOT HAVE FULL-SIZED DYNAMIC DATA BASE,
; T2/ -1 IF LINE IS BECOMING ACTIVE
; OR
; T2/ 0 IF LINE IS TOTALLY INACTIVE
; OR
; T2/ ADDRESS OF DYNAMIC DATA BLOCK IF BLOCK IS NONSTANDARD
; +2: LINE HAS FULL-SIZED DYNAMIC DATA BASE,
; T2/ ADDRESS OF DYNAMIC DATA BLOCK
;CLOBBERS NO AC'S
;CALLER SHOULD INSURE THAT THE TERMINAL'S DATA CANNOT GO AWAY EITHER
;BY BEING NOSKED OR BY CALLING LCKTTY
STADYN::SKIPLE T2,TTACTL(T2) ;HAVE A BLOCK?
RETSKP ;YES. FULLY ACTIVE LINE
CAME T2,[-1] ;NO. IS IT BECOMING ACTIVE?
TXZ T2,1B0 ;NO. IS MESSAGE OR SHORT. RETURN IT
RET ;DONE
REPEAT 0,< ;UNUSED ROUTINE
;DYNSTA - CONVERT ADDRESS OF STATIC DATA BASE TO INTERNAL LINE NUMBER
;ACCEPTS: T2/ ADDRESS OF STATIC DATA BASE
; CALL DYNSTA
;RETURNS +1: ALWAYS,
; T2/ INTERNAL LINE NUMBER
DYNSTA::LOAD T2,TINTL,(T2) ;GET FROM DYNAMIC DATA
RET ;RETURN
> ;END OF REPEAT 0
;LCKTTY - GET ADDRESS OF DYNAMIC DATA AND PREVENT DEALLOCATION
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL LCKTTY
;RETURNS +1: LINE DOES NOT HAVE FULL-SIZED DYNAMIC DATA BASE,
; T2/ -1 IF LINE IS BECOMING ACTIVE
; OR
; T2/ 0 IF LINE IS TOTALLY INACTIVE
; OR
; T2/ ADDRESS OF DYNAMIC DATA BLOCK IF BLOCK IS NONSTANDARD
; +2: LINE HAS FULL-SIZED DYNAMIC DATA BASE,
; T2/ ADDRESS OF DYNAMIC DATA BLOCK
;NOTE THAT THE CALLER MUST CALL ULKTTY BEFORE THE DATA BLOCK CAN BE
;DEASSIGNED. ULKTTY WILL ACCEPT ANY OUTPUT FROM LCKTTY, SO IF THE CALLER
;IS INTERESTED ONLY IN FULLY ACTIVE BLOCKS, IT SHOULD CALL ULKTTY EVEN
;IF LCKTTY TAKES A NON-SKIP RETURN
;CLOBBERS NO AC'S
LCKTTY::NOSKD1 ;NO OTHER JOBS RUNNING UNTIL DATA LOCKED
SKIPG T2,TTACTL(T2) ;ANY DATA BASE AT ALL?
JRST [ SKIPE T2 ;NOT FULLY ACTIVE. IS IT ASSIGNED?
CAMN T2,[-1] ;OR BECOMING ACITVE?
RETBAD (,<OKSKD1>) ;NOT A BLOCK
TXZ T2,1B0 ;MESSAGE OR SHORT. MAKE IT ADDRESSABLE
CALLRET LCKTT] ;LOCK IT
CALL LCKTT ;LINE IS FULLY ACTIVE. DO THE LOCKING
RETSKP ;INDICATE FULL-LENGTH BLOCK
;LCKTT - DO THE REAL LOCKING
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL LCKTT
;RETURNS +1: ALWAYS, NOINT
;PRESERVES ALL AC'S
LCKTT: SKIPE INSKED ;DON'T LOCK IF IN SCHEDULER
RET
NOINT ;BE NOINT WHILE LINE IS LOCKED
INCR TTLCK,(T2) ;INCREMENT LINE'S LOCK COUNT
OKSKD1 ;ALLOW SCHEDULING ONCE LOCKED
RET
;ULKTTY - CLEAR LOCK BIT
;ACCEPTS:
; T2/ OUTPUT FROM LCKTTY
; CALL ULKTTY
;RETURNS +1: ALWAYS, OKINT
;CLOBBERS NO AC'S
ULKTTY::SKIPN INSKED ;DON'T DECREMENT COUNT IF IN SCHEDULER
SKIPG T2 ;NO COUNT IF INACTIVE OR BECOMING ACTIVE
RET
JE TTLCK,(T2),ULKTMP ;CHECK FOR OVERLY DECREMENTING
DECR TTLCK,(T2) ;DECREMENT LINE'S LOCK COUNT
OKINT ;ALLOW INTERRUPTS NOW THAT BLOCK IS UNLOCKED
RET
ULKTMP: SAVELN
LOAD T2,TINTL,(T2)
BUG(ULKBAD,<<T2,D>>)
OKINT
RET
;ULKTT - DECREMENT THE LOCK COUNT. CALLED ONLY FROM FREE
ULKTT:: DECR TTLCK,(T2)
RET
;ROUTINES TO ADJUST LOCK STATUS BEFORE AND AFTER DISMISSING.
;THIS CODE PUTS AN ENTRY ON THE JSB STACK IN THE EVENT THE PROCESS
;IS INTERRUPTED WHILE DISMISSED.
;PUT ENTRY ON JSB STACK, AND GO OKINT
;ACCEPTS: T2/ ADDRESS OF DYNAMIC DATA
REPEAT 0,< ;NOT USED
TTYDIS: JE TTLCK,(T2),R ;THIS IS A HACK TO KEEP FSIINI HAPPY.
;SINCE THE SWAPPABLE MONITOR IS NOT
;LOADED YET, WE CAN'T USE THE NORMAL
;LOCKING STATEGY. THIS IS ACCEPTABLE
;HERE SINCE NO CONFUISION CAN RESULT.
SKIPE INSKED ;IN THE SCHEDULER?
RET ;YES. DON'T MANIPULATE THE JSB STACK
SAVET ;SAVE ALL REGISTERS
LOAD T1,TINTL,(T2) ;GET INTERNAL LINE NUMBER
MOVEI T2,STKCD3 ;GET PROPER CODE
CALL JSBSTK ;QUEUE UP THE ENTRY
OKINT ;ALLOW INTS NOW
RET ;AND DONE
;DISMISS WAS SATISFIED. DEQUEUE THE ENTRY AND GO NOINT
TTYAWK: JE TTLCK,(T2),R ;THIS IS A HACK TO KEEP FSIINI HAPPY.
;SINCE THE SWAPPABLE MONITOR IS NOT
;LOADED YET, WE CAN'T USE THE NORMAL
;LOCKING STATEGY. THIS IS ACCEPTABLE
;HERE SINCE NO CONFUISION CAN RESULT.
SKIPE INSKED ;IN THE SCHEDULER?
RET ;YES. DON'T MANIPULATE THE JSB STACK
SAVET ;SAVE ALL REGISTERS
NOINT ;PREVENT INTS
LOAD T1,TINTL,(T2) ;GET INTERNAL LINE NUMBER
MOVEI T2,STKCD3 ;GET TYPE
CALLRET JSFRMV ;REMOVE ENTRY AND DONE
> ;END OF REPEAT 0
SUBTTL ALLOCATION/DEALLOCATION
;TTYASO - ASSIGN TERMINAL FOR OPENF
;ACCEPTS:
; T2/ LINE NUMBER
; CALL TTYASO
;RETURNS +1: FAILED,
; T1/ 1B0 + ADDRESS OF ROUTINE IF NEED TO DISMS
; T1/ ERROR CODE IF FAILED
; +2: SUCCEEDED
;PRESERVES T2
SWAPCD
TTYASO::SAVELN
STKVAR <TTYALN>
MOVEM T2,TTYALN ;SAVE LINE NUMBER
CALL STADYN ;IS LINE FULLY ACTIVE?
SKIPA ;NO.
JRST TTYAO4 ;FULLY ACTIVE. HANDLE SPECIALLY
JUMPLE T2,TTYAO1 ;SEE IF SHORT OR MESSAGE BLOCK IN USE
;TTACTL>0. LINE IS TEMPORARILY ACTIVE FOR SYSTEM MESSAGE OR SENDALL
;WAIT UNTIL TTACTL<=0 OR FULL-LENGTH BLOCK HAS BEEN ASSIGNED AND TRY AGAIN.
MOVE T1,[TSACT1] ;YES. SET UP TO WAIT
TXO T1,1B0 ;INDICATE IT'S A ROUTINE ADDRESS
RETBAD ;LET CALLER DO A DISMS
TTYAO1: JUMPE T2,TTYAO2 ;SEE IF LINE BECOMING ACTIVE
;TTACTL<0. LINE IS BECOMING ACTIVE (ANOTHER FORK IN THIS JOB IS
;INITIALIZING IT). WAIT UNTIL LINE IS INACTIVE OR HAS FULL-LENGTH BLOCK
;AND TRY AGAIN
MOVE T1,[TSACT2] ;YES. SET UP TO WAIT
TXO T1,1B0 ;INDICATE IT'S A ROUTINE ADDRESS
RETBAD ;LET CALLER DO A DISMS
;TTACTL=0. ASSIGN A DYNAMIC BLOCK FOR THE LINE AND INITIALIZE ITS VALUES.
TTYAO2: MOVE T2,TTYALN ;GET LINE NUMBER
SETOM TTACTL(T2) ;INDICATE BEING INITIALIZED
LOAD T1,TTSTY,(T2) ;GET THE LINE TYPE
MOVE T1,TTLINV(T1) ;GET ADDRESS OF VETOR TABLE
MOVE T1,DDLEN(T1) ;GET LONG BLOCK LENGTH
HRLI T1,.RESP3 ;T1/ INDICATE PROCESS CONTEXT
MOVEI T2,.RESTP
CALL ASGRES ;GET SOME FREE SPACE
JRST TTYAO3 ;NO SPACE AVAILABLE
MOVE T2,TTYALN ;T2/ LINE NUMBER, T1/ ADDRESS OF DYNAMIC BLOCK
CALL TTSETL ;INITIALIZE VALUES FOR TERMINAL
MOVEM T1,TTACTL(T2) ;MAKE STATIC DATA POINT TO DYNAMIC
RETSKP
;FAILED TO GET RESIDENT STORAGE. LET THE OPENF FAIL
TTYAO3: MOVE T2,TTYALN ;GET LINE NUMBER
SETZM TTACTL(T2) ;RESTORE TTACTL TO PREVIOUS VALUE
RETBAD
;LINE WAS ALREADY ACTIVE. IF PERMANENT, IT MAY BE BECOMING
;ACTIVE. IN THAT CASE, MAKE IT ACTIVE.
TTYAO4: JE <TTBAC,TTPRM>,(T2),RSKP ;IF NOT BECOMING ACTIVE, OK AS IS
MOVE T3,JOBNO ;GET THIS JOB'S NUMBER
STOR T3,TCJOB,(T2) ;INDICATE IT OWNS THIS TERMINAL
SETZRO TTBAC,(T2) ;INDICATE NOT BECOMING ACTIVE
RETSKP
;TSACT1 - SCHEDULER TEST TO SEE IF LINE IS AVAILABLE
;ACCEPTS:
; T1/ INTERNAL LINE NUMBER
;CAUSES WAKEUP IF LINE IS INACTIVE, BECOMING ACTIVE, OR HAS A FULL-LENGTH
;BLOCK
RESCD
TSACT1::HRRZ T2,T1 ;GET LINE NUMBER
CALL STADYN ;POINT TO DYNAMIC DATA
JUMPG T2,0(T4) ;NOT FULLY ACTIVE
JRST 1(T4) ;FULLY ACTIVE. WAKEUP
;TSACT2 - SCHEDULER TEST TO SEE IF LINE IS AVAILABLE
;ACCEPTS:
; T1/ INTERNAL LINE NUMBER
;CAUSES WAKEUP IF LINE IS INACTIVE OR FULLY ACTIVE
TSACT2: HRRZ T2,T1 ;GET LINE NUMBER
CALL STADYN ;POINT TO DYNAMIC DATA
JUMPN T2,0(T4) ;NOT FULLY ACTIVE
JRST 1(T4) ;FULLY ACTIVE. WAKEUP
;TTYASC - ASSIGN TERMINAL AS CONTROLLING TERMINAL FOR A JOB
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL TTYASC
;RETURNS +1: FAILED,
; T1/ ERROR CODE
; +2: SUCCEEDED
;PRESERVES T2
SWAPCD
TTYASC::SAVELN
STKVAR <TTYALN>
MOVEM T2,TTYALN ;SAVE LINE NUMBER
CALL STADYN ;POINT TO DYNAMIC DATA
SKIPA ;NOT FULLY ACTIVE
JRST TTYAC4 ;FULLY ACTIVE. GO HANDLE SPECIALLY
JUMPLE T2,TTYAC1 ;SEE IF SHORT OR MESSAGE BLOCK IN USE
;TTACTL>0. LINE IS TEMPORARILY ACTIVE FOR SYSTEM MESSAGE OR SENDALL.
;FAIL ON THE ASSUMPTION THAT THE USER WILL TYPE ANOTHER CTRL/C.
RETBAD (TTYX01)
;TTACTL<=0. LINE IS INACTIVE OR BECOMING ACTIVE. ASSIGN STORAGE AND
;INITIALIZE VALUES
TTYAC1:
MOVE T2,TTYALN ;GET LINE NUMBER
SETOM TTACTL(T2) ;INDICATE BEING INITIALIZED
LOAD T1,TTSTY,(T2) ;GET THE LINE TYPE
MOVE T1,TTLINV(T1) ;GET ADDRESS OF VETOR TABLE
MOVE T1,DDLEN(T1) ;GET LONG BLOCK LENGTH
HRLI T1,.RESP3 ;T1/ INDICATE PROCESS CONTEXT
MOVEI T2,.RESTP
CALL ASGRES ;GET SOME FREE SPACE
JRST TTYAC3 ;NO SPACE AVAILABLE
MOVE T2,TTYALN ;T2/ LINE NUMBER, T1/ ADDRESS OF DYNAMIC BLOCK
CALL TTSETL ;INITIALIZE VALUES FOR TERMINAL
MOVEM T1,TTACTL(T2) ;MAKE STATIC DATA POINT TO DYNAMIC
RETSKP
;FAILED TO GET RESIDENT STORAGE. FAIL
TTYAC3: MOVE T2,TTYALN ;GET LINE NUMBER
SETZM TTACTL(T2) ; INDICATE INACTIVE
RETBAD
;LINE WAS ALREADY ACTIVE. IF PERMANENT, IT MAY BE BECOMING
;ACTIVE. IN THAT CASE, MAKE IT ACTIVE.
TTYAC4: JE TTPRM,(T2),RSKP
MOVE T3,JOBNO ;GET THIS JOB'S NUMBER
STOR T3,TCJOB,(T2) ;INDICATE IT OWNS THIS TERMINAL
SETZRO TTBAC,(T2) ;INDICATE NOT BECOMING ACTIVE
RETSKP
;TTYDEA - DEALLOCATE A DYNAMIC BLOCK
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL TTYDEA
;RETURNS +1: FAILURE,
; T1/ 1B0+ ADDRESSOF ROUTINE IF NEED TO DISMISS
; T1/ ERROR CODE IF FAILED
; +2: SUCCESS
SWAPCD
TTYDEA::TDJRST S,VDETDB ;GO DO DEVICE DEPENDENT STUFF ;DEASIGN TTY DATA BASE
TTYDE0: SAVELN
STKVAR<TTYDLN,TTYDAD>
MOVEM T2,TTYDLN ;SAVE INTERNAL LINE NUMBER
CALL STADYN ;POINT TO DYNAMIC DATA
JRST TTYDE1 ;NOT ACTIVE. SHOULDN'T HAPPEN
JN TTPRM,(T2),TTYDE3 ;HANDLE PERMANENT BLOCK SPECIALLY
JN TTLCK,(T2),TTYDE2 ;IF LOCKED, WAIT FOR COUNT TO GO TO 0
JN TTSAL,(T2),TTYDE2 ;IF DOING SENDALL, WAIT UNTIL DONE
MOVEM T2,TTYDAD ;SAVE ADDRESS OF DYNAMIC DATA
CHNOFF DLSCHN ;TURN OFF TTY CHANNEL
CALL TTRLOB ;RELEASE OUTPUT BUFFERS
MOVE T2,TTYDAD ;T2/ ADDRESS OF DYNAMIC DATA
CALL TTCIBF ;CLEAR INPUT, RELEASE BUFFERS IF NEEDED
MOVE T2,TTYDAD ;DYNAMIC DATA ADDRESS AGAIN
CALL TTXON ;MAKE SURE IS NOT X-OFF'ED
MOVE T2,TTYDAD ;GET DYN ADDRESS
SETZRO TT%PGM,TTFLGS(T2) ;INSURE WE WILL TURN XOFF FLAGS OFF
TDCALL D,VSFEXO ;TELL FRONT-END ;ENABLE/DISABLE FRONT-END XOFF RECOGNITION
MOVE T2,TTYDLN ;GET BACK LINE NUMBER
SETZM TTACTL(T2) ;INDICATE NO DYNAMIC DATA
CHNON DLSCHN ;TURN CHANNEL BACK ON
MOVE T1,TTYDAD ;T1/ ADDRESS OF BLOCK
CALL RELRES ;RELEASE THE RESIDENT SPACE
RETSKP ;SUCCESS
;LINE IS NOT ACTIVE. THIS SHOULD NOT HAPPEN
TTYDE1: MOVE T2,TTYDLN ;GET LINE NUMBER
BUG(TTNAC7,<<T2,D>>)
RETSKP
;DYNAMIC DATA IS LOCKED. RETURN TO CALLER TO WAIT FOR IT TO
;BECOME UNLOCKED
TTYDE2: MOVE T1,[TSACT3] ;POINT TO SCHEDULER TEST
TXO T1,1B0 ;INDICATE ROUTINE NAME
RETBAD
;PERMANENT BLOCK. DON'T DEALLOCATE IN THE USUAL WAY
TTYDE3: SETZM TTPSI(T2) ;CLEAR INTERRUPTS
SETZM TTDPSI(T2) ; AND DEFERRED INTERRUPTS
SETONE TCJOB,(T2) ;INDICATE NO OWNING JOB
MOVE T1,TTYDLN ;T1/ LINE NUMBER
CALL CHKPTY ;IS THIS A PTY?
RETSKP ;NO.
CALL PTYFIN ;YES. INDICATE HUNGRY
RETSKP
;TSACT3 - SCHEDULER TEST FOR ACTIVE LINE
;ACCEPTS:
; T1/ LINE NUMBER
;CAUSES WAKEUP IF LOCK COUNT FOR THE DATA IS 0
RESCD
TSACT3::HRRZ T2,T1 ;T2/ LINE NUMBER
CALL STADYN ;POINT TO DYNAMIC DATA
JRST 1(T4) ;NOT ACTIVE. WAKE PROCESS
JN TTSAL,(T2),0(T4) ;DON'T WAKE UP IF DOING SENDALL
OPSTR <SKIPN>,TTLCK,(T2) ;IS LOCK COUNT DOWN TO 0 YET?
JRST 1(T4) ;YES. WAKE UP
PUSH P,T4 ;SAVE RETURN PC
CALL TTCBF2 ;FLUSH OUTPUT BUFFERS
POP P,T4 ;RESTORE RETURN PC
JRST 0(T4) ;NO. DON'T WAKE UP
;ASGMSG - ASSIGN BLOCK FOR MESSAGE
;ASGMSL- ASSIGN FULL LENGTH MESSAGE BLOCK FOR SPECIAL PURPOSES
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL ASGMSG
; CALL ASGMSL
;RETURNS +1: FAILURE,
; T1/ ERROR CODE
; +2: SUCCESS,
; T2/ LINE NUMBER
RESCD
ASGMSG: TDZA T4,T4 ;EXTRA LENGTH
ASGMSL: MOVEI T4,TTDDLN-MSGLEN ;"LONG MESSAGE BLOCK"
STKVAR <ASGMLN>
MOVEM T2,ASGMLN ;SAVE LINE NUMBER
MOVSI T1,.RESP2 ;INDICATE CAN'T TAKE PAGE FAULT
HRRI T1,MSGLEN(T4) ;T1/ (SIZE,,PRIORITY)
MOVEI T2,.RESTP
CALL ASGRES ;GET SOME FREE SPACE
RETBAD ;FAILED
MOVE T2,ASGMLN ;GET LINE NUMBER
CALL TTSETM ;INITIALIZE VALUES
SETONE TTMES,(T1) ;INDICATE MESSAGE BLOCK
TXO T1,1B0 ;SAY IS A SPECIAL BLOCK
MOVEM T1,TTACTL(T2) ;MAKE STATIC POINT TO DYNAMIC
AOSG TTQCNT ;FIRST SPECIAL LINE?
MOVEM T2,TTCQLN ;YES. START SCAN HERE THEN
TXZ T1,1B0 ;RETURN ADDRESSABLE BLOCK
RETSKP ;INDICATE SUCCESS
;ASHSHT - ASSIGN A SHORT (SENDALL) BLOCK
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL ASGSHT
;RETURNS +1: FAILURE,
; T1/ ERROR CODE
; +2: SUCCESS,
; T1/BUFFER ADDRESS
; T2/ LINE NUMBER
SWAPCD
ASGSHT: LOAD T1,TTSTY,(T2) ; Get line type
CAIN T1,TT.NVT ; NVT?
JRST R ; Yes, don't do this then
STKVAR <ASGSLN>
MOVEM T2,ASGSLN ;SAVE LINE NUMBER
MOVSI T1,.RESP3 ;INDICATE CAN TAKE PAGE FAULT
HRRI T1,SHTLEN ;T1/ (SIZE,,PRIORITY)
MOVEI T2,.RESTP
CALL ASGRES ;GET SOME FREE SPACE
RETBAD ;FAILED
MOVE T2,ASGSLN ;GET LINE NUMBER
CALL TTSETS ;INITIALIZE VALUES
SETONE TTSHT,(T1) ;INDICATE MESSAGE BLOCK
RETSKP ;INDICATE SUCCESS
SUBTTL JSYS SUPPORT ROUTINES
;TTCOBF - CLEAR OUTPUT BUFFER
;TTCOB1 - ENTRY POINT FOR CALLING FROM WITHIN TTYSRV
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL TTCOB1
;RETURNS +1: ALWAYS
;IF LINE HAS NO OUTPUT BUFFERS, RETURNS QUIETLY. IF IT HAS A MESSAGE BLOCK,
;IGNORES LINKS. IF FULLY ACTIVE, HANDLES LINKS
RESCD
TTCOB1: SAVELN ;SAVE LINE NUMBER
CALL LCKTTY ;POINT TO DYNAMIC DATA
JRST [ JUMPLE T2,TTCOB3 ;IF BECOMING ACTIVE OR INACTIVE, NO BUFFERS
JE TTMES,(T2),TTCOB3 ;IF NOT A MESSAGE BLOCK, NO BUFFERS
CALL TTCBF2 ;MESSAGE BLOCK (HAS NO LINKS). CLEAR
CALLRET ULKTTY] ;ALLOW DEALLOCATION
CALL TTCOB2 ;FULLY ACTIVE. PROCESS LINKS
TTCOB3: CALLRET ULKTTY ;ALLOW DEALLOCATION
;TTCOBF - ENTRY FOR OUTSIDE OF TTYSRV
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTCOBF
;RETURNS +1: ALWAYS
;LINE MUST BE FULLY ACTIVE AND ITS DYNAMIC BLOCK LOCKED WHEN CALLED FROM OUTSIDE
TTCOBF::SAVELN
TTCOB2: MOVE C,TTLINK(B) ;GET LINES THAT THIS LINE IS LINKED TO
CAMN C,[-1] ;ANY LINKS?
CALLRET TTCBF2 ;NO. JUST CLEAR THIS LINE'S BUFFERS
;LINE IS LINKED TO ONE OR MORE LINES. LOOP THROUGH TTLINK, PICKING UP
;A LINE NUMBER AND CLEARING ITS OUTPUT BUFFERS UNTIL ALL LINKS ARE
;PROCESSED
PUSH P,B ;SAVE ADDRESS OF DYNAMIC DATA
TTCBF3: SETZ B, ;INITIALIZE TO GET LINE NUMBER
LSHC B,^D9 ;GET NEXT LINE LINKED TO
CAIN B,777 ;THIS FIELD BEING USED?
JRST TTCBF4 ;NO
CALL LCKTTY ;GET ADDRESS OF DYNAMIC DATA AND PREVENT DEALLOCATION
JRST [ CALL ULKTTY
JRST TTCBF4] ;NOT ACTIVE. DON'T DO ANYTHING
PUSH P,C ;SAVE LINK WORD
CALL TTCBF2 ;GO CLEAR BUFFER FOR LINKED LINE
CALL ULKTTY ;ALLOW DEALLOCATION
POP P,C ;RESTORE LINK WORD
TTCBF4: JUMPN C,TTCBF3 ;GO DO ALL OF THEM
;ALL LINKS HAVE BEEN PROCESSED. NOW PROCESS THE ORIGINAL LINE AND QUIT
POP P,B ;RESTORE ADDRESS OF DYNAMIC DATA
CALLRET TTCBF2 ;CLEAR BUFFERS FOR THIS LINE
;TTCBF2 - CLEAR OUTPUT BUFFER FOR ONE LINE
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTCBF2
;RETURNS +1: ALWAYS
;CALLER MUST HAVE CALLED LCKTTY ON THIS LINE
TTCBF2: NOSKD1
CHNOFF DLSCHN ;TURN OFF CHANNEL ALSO
TDJRST D,VCLOBF ;CLEAR OUTPUT BUFFER
;HERE WHEN LINE IS NOT A FRONT END LINE OR WHEN FRONT END WORK HAS
;BEEN DONE
TTCOB5: SETZM TTOCT(2) ;ZERO OUTPUT COUNT
SETZB 3,TTOOUT(2) ;CLEAR OUTPUT POINTER
EXCH 3,TTOIN(2) ;CLEAR INPUT POINTER
CALL TTRLBF ;RELEASE BUFFERS
CHNON DLSCHN
CALL TTXON ;REACTIVATE OUTPUT IF NECESSARY
OKSKD1
CALL CHKBKO ;PERHAPS FORK WAITING FOR OBUF EMPTY
RET
;TTCIBF - CLEAR INPUT BUFFER
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTCIBF (TTCIB0 TO CLEAR RESCAN POINTER TOO)
;RETURNS +1: ALWAYS,
; T2 PRESERVED
TTCIB0::PUSH P,2 ;SAVE ADDRESS OF DYNAMIC DATA
DYNST ;GET LINE NUMBER
CAMN 2,CTRLTT ;CONTROLLING TTY?
SETZM RSCNPT ;YES, CLEAR RESCAN POINTER TOO
POP P,2 ;RESTORE ADDRESS OF DYNAMIC DATA
TTCIBF::SAVELN ;SAVE LINE NUMBER
TDCALL D,VCLIBF ;CLEAR INPUT BUFFER
NOSKD1
SETZRO <TTRFG>,(T2) ;CLEAR BKJFN FLAG
SETZB T1,TTICT(T2) ;CLEAR COUNT OF INPUT CHARACTERS
STOR T1,TYLCH,(T2) ;CLOBBER LAST CH IN CASE CR
SETZB 3,TTIOUT(T2) ;CLEAR POINTER FOR REMOVING CHARACTERS
EXCH 3,TTIIN(2) ; AND POINTER FOR ADDING CHARACTERS
CALL TTRLBF ;RELEASE INPUT BUFFERS
OKSKD1
DYNST ;GET BACK LINE NUMBER
CALLRET SNDXON ;SEND XON IF NEEDED
SWAPCD
;TTSIBE - SKIP IF INPUT BUFFER IS EMPTY
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; T3/ BYTE SIZE OF OPEN OR 0 IF A JFN WAS NOT GIVEN BY CALLER
; CALL TTSIBE
;RETURNS +1: INPUT BUFFER IS NOT EMPTY
; T1/ COUNT OF CHARACTERS
; +2: INPUT BUFFER IS EMPTY
; T1/ 0
;THIS ROUTINE COUNTS NUMBER OF CHARACTERS AVAILABLE FOR INPUT FROM LINE
;IN T2. THE COUNT IS RETURNED IN T1. THE QUANTITIES ACCUMULATED ARE
;THE FOLLOWING:
;
; 1) RECIRCULATED CHARACTER, LIKE IF BKJFN WAS DONE
; 2) RSCANED DATA(*)
; 3) TYPEAHEAD THAT'S STILL IN THE INPUT BUFFER
; 4) PHANTOM LINEFEED, ASSUMED IF LAST READ CHARACTER WAS CR
;
; (*) THERE IS A BUG HERE. THIS ROUTINE ONLY EXAMINES THE
; RSCAN BUFFER IF THE TERMINAL IS THE PROGRAM'S
; CONTROLLING TERMINAL. THE CORRECT PROCEDURE IS TO
; EXAMINE THE RSCAN BUFFER FOR WHICHEVER TERMINAL IS
; BEING INTERRAGATED. THIS IS A BIT TRICKY, SINCE THE
; RSCAN STATUS IS STORED IN SOMEON'S JSB, AND YOU FIRST
; HAVE TO FIGURE OUT WHO, THEN CALL SETJSB, ETC...
TTSIBE::LOAD T1,TTRFG,(T2) ;0 IF NO RECIRCULATED CHARACTER, 1 IF SO
PUSH P,T3 ;SAVE THE BYTE SIZE
PUSH P,T2 ;SAVE ADDRESS OF DYNAMIC DATA
DYNST ;GET LINE NUMBER
CAMN T2,CTRLTT ;IS THIS THE CONTROLLING TERMINAL FOR THIS JOB?
SKIPN T3,RSCNPT ;YES. GET RESCAN POINTER
JRST TTSIB1 ;NOT CONTROLLING OR POINTER IS 0
TTSIB2: ILDB T4,T3 ;PICK UP CHARACTER FROM RSCAN BUFFER
JUMPE T4,TTSIB1 ;LEAVE LOOP IF NO MORE.
AOJA T1,TTSIB2 ;COUNT LENGTH OF RSCAN BUFFER
TTSIB1: POP P,T2 ;RESTORE ADDRESS OF DYNAMIC DATA
POP P,T4 ;GET BACK BYTE SIZE
ADD T1,TTICT(T2) ;ADD CHARACTERS IN REGULAR INPUT BUFFER
LOAD T3,TT%DAM,TTFLGS(T2) ;GET CURRENT MODE
CAIE T4,10 ;BINARY MODE OPEN ON THE JFN?
JUMPN T3,[LOAD T3,TYLCH,(T2) ;NOT BINARY, CHECK LAST CHAR
LOAD T4,TYLMD,(T2) ; GET DATA MODE OF LAST CHAR
CAIN T3,.CHCRT ;CR?
CAIN T4,.TTBIN ; YES, Input in Non-Binary mode?
JRST .+1 ; NO to either, no LF
AOJA T1,.+1] ; Yes to both, LF still available
CAILE T1,0 ;POSITIVE COUNT?
RET ;YES, SO TAKE NON-SKIP RETURN
RETSKP ;NO. SKIP
;TTSOBE - SKIP IF OUTPUT BUFFER IS EMPTY
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTSOBE
;RETURNS +1: OUTPUT BUFFER NOT EMPTY
; T1/ COUNT
; +2: OUTPUT BUFFER IS EMPTY
; T1/ 0
RESCD
TTSOBE::
TDJRST D,VSOBE ;SOBE
TTSBE1: JN TTOTP,(T2),R ;NONSKIP IF OUTPUT IS STILL ACTIVE
SKIPG 1,TTOCT(2) ;BYTES STILL IN -10 MEMORY
RETSKP ;YES. SKIP
RET ;NO. NONSKIP
;TTSOBF - SKIP IF OUTPUT BUFFER IS FULL
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTSOBF
;RETURNS +1: OUTPUT BUFFER IS NOT FULL
; T1/ COUNT
; +2: OUTPUT BUFFER IS FULL
; T1/ COUNT
SWAPCD
TTSOBF::LOAD 3,TOMAX,(2) ;CAPACITY OF OUTPUT BUFFER
MOVE 1,TTOCT(2) ;GET NUMBER OF CHARACTERS IN BUFFER
CAIL 1,0(3) ;FULL?
RETSKP ;YES. SKIP
RET ;NO. NONSKIP
;TTDOBE - DISMISS UNTIL OUTPUT BUFFER IS EMPTY
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTDOBE
;RETURNS +1: NEED TO RETRY
; +2 DONE. BUFFER IS EMPTY
;WAITS UNTIL OUTPUT BUFFER IS EMPTY
TTDOBE::
JN TTOTP,(T2),TTDBE1 ;IF OUTPUT ACTIVE, GO DISMISS
MOVE T1,TTOCT(2) ;ANY CHARACTERS IN BUFFER?
JUMPG T1,TTDBE1 ;YES DISMISS
TDCALL D,VDOBE ;NO. NOW EMPTY ;DOBE
RETSKP ;SAY SO
;CHARACTERS ARE PRESENT. DISMISS UNTIL THEY ARE GONE
TTDBE1: CALL CHKPTA ;CHECK FOR PTY ACTION NEEDED
SETONE TTBKO,(T2) ;NOTE WAITING FOR OUTPUT EVENT
DYNST T1 ;GET STATIC DATA ADDRESS
CALL ULKTTY ;UNLOCK TTY
HRLZS T1 ;LINE # TO LH
HRRI 1,TTOBET ;1/(LINE NUMBER,,ROUTINE TO CALL)
MOVSI T2,FHV5 ;BLOCK PRIORITY
HDISMS
RET ;SAY NEED TO RETRY
;TTDIBE - DISMISS UNTIL INPUT BUFFER IS EMPTY
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTDIBE
;RETURNS +1: NEED TO RETRY
; +2 DONE. BUFFER EMPTY
;WAITS UNTIL INPUT BUFFER IS EMPTY
TTDIBE::SKIPG TTICT(T2) ;BUFFER EMPTY NOW?
RETSKP
DYNST T1 ;GET LINE NUMBER
CALL ULKTTY ;UNLOCK TTY
HRLZS T1 ;LINE # TO LH
HRRI 1,TTIBET ;1/(LINE NUMBER,,ROUTINE TO CALL)
MDISMS
RET ;NEED TO RETRY
;SCHEDULER TESTS FOR TTDOBE AND TTDIBE
RESCD
;TTOBET - CAUSES WAKEUP IF OUTPUT BUFFER IS EMPTY (INCLUDING CHARACTERS
;EN ROUTE TO THE LINE)
;ACCEPTS:
; T1/ INTERNAL LINE NUMBER
TTOBET::
HRRZ T2,T1 ;GET LINE NUMBER
CALL STADYN ;GET ADDRESS OF DYNAMIC DATA
JRST 1(T4) ;NOT ACTIVE. THIS SHOULDN'T HAPPEN
TDJRST D,VDOBET ;WAKEUP IF OUTPUT BUFFER EMPTY
TTOBE1: SKIPE TTOCT(T2) ;IS OUTPUT BUFFER EMPTY?
JRST 0(4) ;NO. DON'T WAKE UP
OPSTR <SKIPE>,TTOTP,(T2) ;OUTPUT ACTIVE?
JRST 0(4) ;YES. CAN'T UNLBLOCK
SETZRO TTBKO,(T2) ;NOTE WAIT COMPLETED
JRST 1(T4)
;TTIBET - CAUSES WAKEUP IF INPUT BUFFER IS EMPTY
;ACCEPTS:
; T1/ INTERNAL LINE NUMBER
TTIBET: HRRZ T2,T1 ;GET LINE NUMBER
CALL STADYN ;GET ADDRESS OF DYNAMIC DATA
JRST 1(T4) ;NOT ACTIVE. THIS SHOULDN'T HAPPEN
SKIPE TTICT(T2) ;IS INPUT BUFFER EMPTY?
JRST 0(4) ;NOT EMPTY. DON'T WAKE UP
JRST 1(4) ;EMPTY. WAKE UP
;TAB GET/SET - PHASED OUT
SWAPCD
TTGTBS::
TTSTBS::RET
;TTRMOD - CODE TO DO THE RFMOD JSYS
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
;RETURNS +1: ALWAYS
; T1/JFN MODE WORD
;NOTE: IF PAGE WIDTH OR LENGTH IS >177, RETURNS 1 IN THESE FIELDS.
;USER MUST THEN DO AN MTOPR TO GET THE REAL VALUE
TTRMOD::SAVELN
MOVE 1,TTFLGS(2) ;READ MODES
LOAD T3,TPWID,(T2) ;GET WIDTH
LOAD T4,TPLEN,(T2) ;AND PAGE LENGTH
CAILE T3,177 ;OLD MAXIMUM VALUE
MOVEI T3,DFLWID ;TOO BIG. GET DEFAULT WIDTH
CAILE T4,177 ;OLD MAXIMUM VALUE
MOVEI T4,DFLLEN ;TOO BIG. GET DEFAULT LENGTH
STOR T3,TT%WID,1 ;STORE OLD STYLE WIDTH
STOR T4,TT%LEN,1 ;STORE OLD STYLE LENGTH
CALL TTCBM ;GET A TT%WAK FROM THE BREAK MASK
DYNST ;GET LINE NUMBER
JE TTCON,(T2),R ;RETURN UNLESS CARRIER IS ON
SETONE TT%CAR,T1 ;INDICATE CARRIER ON
RET
;TTSMOD - SET TERMINAL MODE
;ACCEPTS:
; T1/ JFN MODE WORD
; T2/ ADDRESS OF DYNAMIC DATA
;RETURNS +1: ALWAYS
;IMPLEMENTS SFMOD JSYS
TTSMOD::PUSH P,1
TRNE 1,400000 ;THIS BIT MUST BE ZERO
ITERR(DECRSV,<CALL ULKTTY>) ;NOT ZERO - ERROR RETURN
XOR 1,TTFLGS(2) ;FIND THE CHANGED BITS
ANDX 1,TT%OSP+TT%WAK+TT%IGN+TT%ECO+TT%DAM ;CHANGE ONLY THESE BITS
XORM 1,TTFLGS(2)
POP P,T1
TXNE T1,TT%IGN ;SHOULD WE IGNORE THE TT%WAK BITS
RET ;YES - THEN DON'T FORCE WAKE-UP
CALL TTCFM ;COMPUTE AND SET FULL MASK
CALLRET TTFWAK ;FORCE WAKEUP
;TTRPOS - READ POSITIONS
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTRPOS
;RETURNS +1: ALWAYS,
; T1/ (LINE POSITION WITHIN PAGE,,CHARACTER POSITION WITHIN LINE)
TTRPOS::MOVE 1,TTLPOS(2) ;READ POSITION
RET
;TTSPOS - SET POSITION
;ACCEPTS:
; T1/ (LINE POSITION WITHIN PAGE,,CHARACTER POSITION WITHIN LINE)
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTSPOS
;RETURNS +1: ALWAYS
TTSPOS::MOVEM 1,TTLPOS(2) ;SET LINE CHARACTER POSITION
RET
;TTRCOC - READ CONTROL CHARACTER OUTPUT CONTROL WORDS
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTRCOC
;RETURNS +1: ALWAYS,
; T1/ FIRST WORD
; T3/ SECOND WORD
TTRCOC::MOVE 1,FCMOD1(2) ;READ CONTROL CHARACTER MODES
MOVE 3,FCMOD2(2)
RET
;TTSCOC - SET CONTROL CHARACTER OUTPUT CONTROL WORDS
;ACCEPTS:
; T1/ FIRST WORD
; T2/ ADDRESS OF DYNAMIC DATA
; T3/ SECOND WORD
; CALL TTSCOC
;RETURNS +1: ALWAYS
TTSCOC::MOVEM 1,FCMOD1(2) ;SET CONTROL CHARACTER MODES
MOVEM 3,FCMOD2(2)
RET
;TTBKPT - "BACKUP" INPUT POINTER - CAN ONLY BACKUP ONE
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL TTBKPT
;RETURNS +1: FAILURE
; +2: SUCCESS
TTBKPT::CAMN 2,CTRLTT ;CONTROLLING TTY?
SKIPN A,RSCNPT ;YES, USING RESCAN BUFFER?
JRST TTBKP1 ;NO, DO NORMAL THING
MOVE C,RSCNBP ;GET POINTER TO RSCAN BUFFER
HRLI C,(POINT 7,0,34) ;SEE IF AT START OF BUFFER
CAMN A,C
JRST TTBKP1 ;YES, DONT BACK IT UP MORE
CALL DBP ;BACK UP BYTE POINTER
MOVEM A,RSCNPT ;PUT IT BACK
RETSKP ;INDICATE SUCCESS
TTBKP1: CALL LCKTTY ;GET DYNAMIC DATA AND LOCK DYNAMIC BLOCK
JRST [ CALL ULKTTY ;NOT ACTIVE. CAN'T BACKUP
RETBAD (TTYX01)]
OPSTR <SKIPE>,TTRFG,(T2) ;HAS BACKUP ALREADY BEEN DONE?
JRST [ CALL ULKTTY ;YES. CAN'T DO ANOTHER
RETBAD (BKJFX1)]
SETONE TTRFG,(T2) ;NOT SET. SET IT TO BE NOTICED AT NEXT TCI
CALL ULKTTY ;ALLOW DEALLOCATION
RETSKP ;SUCCESS
;GET DEVICE DEPENDENT BITS
TTGSTS::LOAD T1,TLTYP,(T2) ;GET VECTOR ADR FOR THIS TTY
MOVE T1,VOPAR(T1) ;GET PARITY INSTRUCTION ;TCOUT - ADD PARITY TO CHARACTER
CAME T1,[TRO T1,200] ;APPLYING PARITY?
TDZA T1,T1 ;NO
MOVX T1,GD%PAR ;YES
RET ;AND DONE
;TTSSPD - CODE TO DO A SET LINE SPEED
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; USER 3/ INPUT SPEED,,OUTPUT SPEED
;
; CALL TTSSPD
;
;RETURNS +1: ON ERROR (CURRENTLY ONLY FOR ACJ REJECTION)
; +2: ON ALL OTHER CONDITIONS
;
;SETS SPEEDS OF FRONT END LINES ONLY. IGNORES ALL OTHERS
;IMPLEMENTS THE .MOSPD FUNCTION OF MTOPR
TTSSPD::
STKVAR <TTSLIN> ;SAVE LINE NUMBER HERE
CAIL B,NLINES ;VALID LINE NUMBER?
RETSKP ;NO. JUST RETURN QUIETLY
MOVEM B,TTSLIN ;SAVE LINE NUMBER
UMOVE C,C ;GET SPEED
GTOKM (.GOTBR,<B,C>,[RETBAD ()]) ;DO GETOK IF NECESSARY AND RETBAD IF ERROR
TDCALL S,VSETSP ;YES GO SET LINE SPEED FOR THIS TYPE ;SET LINE SPEED
MOVE B,TTSLIN ;GET BACK LINE NUMBER
CALL LCKTTY ;GET DYNAMIC DATA ADDRESS
JRST [ CALL ULKTTY ;FAILED TO LOCK, NOT INTERESTING
RETSKP] ; UNLOCK AND RETURN QUIETLY
MOVE T1,T2 ;GET DYNAMIC DATA ADDRESS
MOVE T2,TTSLIN ;GET LINE NUMBER AGAIN
CALL SETOBF ;SET BUFFERING
MOVE T2,T1 ;GET DYNAMIC DATA ADDRESS
CALL ULKTTY ;DONE, UNLOCK DATA
RETSKP ; AND RETURN SUCCESS
;TTRSPD -READ OUT THE SPEED OF A TERMINAL
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL TTRSPD
;RETURNS +1: ALWAYS,
; USER T3/ (INPUT SPEED,,OUTPUT SPEED)
; OR
; -1 IF NOT PHYSICAL TERMINAL OR SPEED NOT SET
;IMPLEMENTS THE .MORSP FUNCTION OF MTOPR
TTRSPD::
CAIL B,NLINES ;LEGAL LINE NUMBER?
JRST TTRSP2 ;NO. RETURN NO SPEED
TDJRST S,VGETSP ;YES GO TO DEV DEP CODE AND READ SPEED ;READ LINE SPEED
;THIS IS A PHYSICAL TERMINAL. RETURN ITS SPEED
TTRSP1: SKIPA C,TTSPWD(B) ;GET SPEED SETTING
TTRSP2: SETO C, ;NO. ASSUME UNKNOWN
UMOVEM C,C ;RETURN IT TO THE CALLER
SETZ C, ;GET AN ACCUMULATOR
OPSTR <SKIPE>,TTFEM,(B) ;REMOTE?
TXO C,MO%RMT ;YES
OPSTR <SKIPE>,TTAUT,(B) ;AUTO?
TXO C,MO%AUT ;YES
XCTU [HLLM C,2] ;RETURN FLAGS
RET ;AND DONE
;TTSSIG - ROUTINE TO SET THE "IGNORE INPUT ON INACTIVE LINE" BIT
;
;ACCEPTS IN T1/ NEW SETTING (0 OR 1)
; T2/ LINE NUMBER
; CALL TTSSIG
;RETURNS: +1 ALWAYS
TTSSIG::STOR T1,TTIGI,(T2) ;STORE NEW SETTING OF IGNORE INPUT BIT
RET ;DONE, RETURN
;ROUTINE TO INIT OUTPUT BUFFERING PARAMETERS.
;CALLED FROM TTSETL AND TTSSPD.
;ONLY CALLED FOR NON-CTY ASSIGNS
; T1/ DYNAMIC DATA ADDRESS
; T2/ LINE NUMBER
;RETURNS: +1 ALWAYS
;ALL REGS PRESERVED
SETOBF: SAVET ;SAVE ALL REGS
MOVE T3,TTSPWD(T2) ;GET LINE SPEED
CAMN T3,[-1] ;KNOWN SPEED?
RET ;NO. GIVE UP THEN
HRRZS T3 ;YES. GET OUTPUT SPEED
MOVE T4,IBFRC ;ASSUME SLOW SPEED
CAILE T3,LOWSPD ;ACCEPTABLE?
MOVE T4,IBFRC1 ;NO. GET OTHER VALUE
MOVEM T4,TTBFRC(T1) ;SET COUNT FIELDS
SETZ T4,0 ;NO BUFFER COUNT IF LOW SPEED
CAILE T3,LOWSPD
MOVEI T4,OVRBCT ;SET OVER QUOTA BUFFER COUNT
STOR T4,TTOCN,(T1) ;SET COUNT
SETZRO TTOMX,(T1) ;INDICATE OVERBUFFER NOT IN USE
RET ;AND DONE
; .MOTPS - ENABLE FOR PSI INTERRUPTS ON NON-CONTROLLING TERMINAL I/O
;CALL WITH:
;B/ TERMINAL NUMBER
;USER AC3/ POINTER TO USER ARGUMENT BLOCK
;BLOCK+0/ LENGTH OF BLOCK (INCLUDING THIS WORD)
;BLOCK+1/ OUTPUT PSI,,INPUT PSI
TTYNPS::ACVAR <W1> ;GET A REGISTER
MOVE W1,B ;SAVE LINE NUMBER
MOVEI A,1 ;OFFSET 1 IN ARG BLOCK
CALL GETWRD ;GET IT
RETBAD(MTOX13) ;ERROR, NO SUCH ARG
HLRZ A,B ;GET OUTPUT PSI CHANNEL
CALL TTNPCK ;VALIDITY CHECK IT
RETBAD(MTOX14) ;ILLEGAL PSI CHANNEL
HRRZ A,B ;GET INPUT PSI CHANNEL
CALL TTNPCK ;VALIDITY CHECK IT
RETBAD(MTOX14) ;ILLEGAL PSI CHANNEL
EXCH W1,B ;GET BACK LINE NUMBER SAVE CHANNELS
CALL LCKTTY ;LOCK TTY DATABASE
RETBAD(TTYX01,<CALL ULKTTY>)
HLRZ A,W1 ;GET OUTPUT PSI
STOR A,TTOPSI,(B) ;STORE IN TTY DATABLOCK
STOR W1,TTIPSI,(B) ;STORE INPUT PSI
CAMN W1,[-1] ;TURNING OFF BOTH CHANNELS?
JRST TTYNP1
MOVE A,FORKX ;NO, GET CALLING FORK NUMBER
STOR A,TTPSFK,(B) ;STORE IT AS WELL
SETONE PSUTPS ;FLAG .MOTPS DONE TO THIS FORK
JRST TTYNP2
TTYNP1: SETONE TTPSFK,(B)
TTYNP2: CALL ULKTTY ;RELEASE TTY DATABASE
RETSKP ;SUCCESS
;VALIDITY CHECK AN ASSIGNABLE PSI CHANNEL
TTNPCK: CAIE A,-1 ;-1 = DEASSIGN
CAIG A,5 ;0-5 OK
RETSKP
CAIL A,^D24
CAILE A,^D35
RET ;NOT 24-35, ILLEGAL
RETSKP ;OK
ENDAV. ;[2607] END ACVAR
;TTDTPS - REMOVE CURRENT FORK FROM TTPSFK OF ALL TERMINALS
TTDTPS::SAVET
SETZRO PSUTPS ;CLEAR BIT THAT GOT US HERE
MOVEI T1,NLINES
TTDTP1: MOVE T2,T1 ;GET LINE NUMBER
CALL LCKTTY ;LOCK DATABASE
JRST TTDTP2 ;NOT FULLY ACTIVE, SKIP
LOAD T3,TTPSFK,(T2) ;GET FORK RECEIVING INT
CAME T3,FORKX ;SAME AS CURRENT?
JRST TTDTP2 ;NO, SKIP IT
SETONE TTPSFK,(T2) ;YES, CLEAR IT
TTDTP2: CALL ULKTTY ;UNLOCK DATABASE
SOJGE T1,TTDTP1 ;LOOP THRU ALL LINES
RET
;TTSNTS - CODE TO DO A SET/RESET NON-TERMINAL STATUS FOR TTY LINE.
; THIS IS PRIMARILY FOR SUPPRESSING UNWANTED SYS MESSAGES
;ACCEPTS:
; 2/ LINE TO SET STATUS OF
; 3/ STATUS VALUE (1 TO TURN OFF MESSAGES, 0 TO TURN ON)
; CALL TTSNTS
;RETURNS +1: ALWAYS
;IGNORES NON-FRONT END LINES
;IMPLEMENTS .MOSNT FUNCTION OF MTOPR
TTSNTS::
CAIL B,NLINES ;LEGAL LINE NUMBER?
RET ;NO. IGNORE IT THEN
TDJRST S,VSETTS ;YES GO SET STATUS FOR THIS LINE ;SET TERMINAL/NON-TERMINAL STATUS
TTSNT2: STOR T3,TTNTS,(T2) ;SAVE THE NEW STATUS
RET
;TTRNTS - READ TTY NON-TERMINAL DEVICE STATUS
;ACCEPTS:
; 2/ INTERNAL LINE NUMBER
; CALL TTRNTS
;RETURNS +1 : ALWAYS,
; 3/ STATUS (0 IF SYSTEM MESSAGES ACCEPTED, 1 IF NOT)
;IMPLEMENTS .MORNT FUNCTION OF MTOPR
TTRNTS::SETZ C, ;GET DEFAULT VALUE
CAIL B,NLINES ;A VALID TERMINAL LINE?
RET ;NO. ASSUME DEFAULT
TDJRST S,VGETTS ;YES GO SET STATUS FOR THIS LINE TYPE ;READ TERMINAL/NON-TERMINAL STATUS
TTRNT1: LOAD T3,TTNTS,(T2) ;GET NON-TERMINAL STATUS
RET
;TTSTIH - TEST INPUT REQUIRED
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTSTIH
;RETURNS +1: ALWAYS,
; 1/ 0 IF NOT HUNGRY
; -1 IF HUNGRY
;HUNGRY IS DEFINED AS EITHER OF THE FOLLOWING:
; 1 - THERE IS NO CONTROLLING JOB FOR THIS LINE (IE, CTRL/C
; WILL CAUSE JOB CREATION)
; 2 - A FORK IS IN INPUT WAIT ON THE LINE AND THERE IS CURRENTLY
; NO REASON TO WAKE IT UP (IT WILL READ A CHARACTER THAT
; IS SENT TO THIS LINE)
;NOT HUNGRY IS RETURNED IF ANY OF THE FOLLOWING IS TRUE:
; 1. THE CONTROLLING JOB NUMBER IS INVALID
; 2. NO FORK IS IN INPUT WAIT ON THIS LINE
; 3. FORCED WAKEUP IS SET SO THAT THE WAITING FORK WILL WAKE UP SOON
; 4. THE OUTPUT BUFFER IS ABOUT TO OVERFLOW (INPUT CHARACTERS ARE THROWN
; AWAY WHEN NOT ECHOED)
; 5. AN INTERRUPT IS PENDING FOR THE WAITING FORK
TTSTIH::LOAD T3,TCJOB,(T2) ;GET OWNING JOB IF ANY
CAIN T3,-1 ;IS THIS TERMINAL ASSIGNED?
JRST [ JE TTBAC,(T2),TTSTI2 ;NO, HUNGRY UNLESS BECOMING ACTIVE
JRST TTSTI1]
CAIL T3,NJOBS ;VALID JOB NUMBER?
JRST TTSTI1 ;NO, RETURN FALSE
REPEAT 0,<
MOVEI 1,1B19
SKIPE TTICT(2) ;ANY CHARS IN BFR?
IORM 1,TTFORK(2) ;YES, WAKE JOB SO CHARS WILL BE TAKEN
>
LOAD T1,TWFRK,(T2) ;GET FORK IN INPUT WAIT
CAIN T1,-1 ;IS THERE ONE?
JRST TTSTI1 ;NO. SAY NOT HUNGRY
JN TTFWK,(T2),TTSTI1 ;YES. IF ABOUT TO WAKEUP BECAUSE INPUT BUFFER
; IS FULL, RETURN NOT HUNGRY
REPEAT 0,<
LOAD T3,TOMAX,(T2) ;IF THE OUTPUT BUFFER IS NEARLY FULL
SUBI T3,^D10 ; SUCH THAT INPUT WILL BE THROWN AWAY
CAMLE T3,TTOCT(T2) ; RETURN NOT HUNGRY
>
SKIPE FKINT(T1) ;IF INTERRUPT IS PENDING, SAY NOT HUNGRY
TTSTI1: TDZA 1,1 ;RETURN NOT HUNGRY
TTSTI2: SETO 1, ;RETURN HUNGRY
RET
;ROUTINES TO SET/READ MODE FIELDS. CALLED FROM MTOPR FUNCTIONS
;IN FILMSC
;SET/READ TERMINAL WIDTH
;ACCEPTS: T1/ NEW WIDTH
; T2/ ADDRESS OF DYNAMIC DATA
TTSWID::JUMPE T1,TTSWI1 ;ALLOW ZERO WIDTH
CAIL T1,10 ;MUST BE GREATER THAN 10
CAIL T1,400 ;AND LESS THAN 400
RET ;ILLEGAL WIDTH
TTSWI1: STOR T1,TPWID,(T2) ;GOOD VALUE. STORE IT
RETSKP ;DONE
TTRWID::LOAD T1,TPWID,(T2) ;READ WIDTH
RET ;DONE
;SET/READ TERMINAL LENGTH
;SAME ARGS AS ABOVE
TTSLEN::JUMPE T1,TTSLE1 ;ALLOW ZERO
CAIL T1,2 ;MUST BE GREATER THAN 2
CAIL T1,400 ;AND LESS THAN 400
RET ;INVALID LENGTH
TTSLE1: STOR T1,TPLEN,(T2) ;GOOD VALUE. STORE IT
RETSKP ;DONE
TTRLEN::LOAD T1,TPLEN,(T2) ;READ LENGTH
RET ;DONE
;SET/READ LINE COUNTER
TTSLC:: MOVEM A,TTLINE(B) ;STORE NEW VALUE
RET
TTRLC:: MOVE A,TTLINE(B)
RET
;SET/READ MAXIMUM LINE COUNTER
TTSLM:: MOVEM A,TTLMAX(B)
RET
TTRLM:: MOVE A,TTLMAX(B)
RET
;SET/CLEAR XOFF/XON PROCESSING BIT
; T3/ 0=> HONOR XON/XOFF
; 1=> DON'T
TTXSET::SKIPE T3 ;WANT TO DO OUTPUT STOP?
MOVEI T3,1 ;YES. MAKE SURE BIT IS THERE
STOR T3,TTNXO,(T2) ;STORE NEW VALUE
CALLRET TTXON ;AND START OUTPUT IF NECESSARY
;READ VALUE OF XOFF BIT
TTRXOB::LOAD T1,TTNXO,(T2) ;GET THE BIT
RET ;DONE
SUBTTL FULL WAKE-UP CLASSES SUPPORT
RESCD
;SET/READ FUNCTIONS FOR FIELD WIDTH AND 128-CHARACTER MASK WAKE-UPS
;TTSBM - SET BREAK MASK
;ACCEPTS: T1/ADDRESS OF FOUR WORD MASK
; T2/DYNAMIC DATA ADDRESS
;RETURNS: +1, ALWAYS
; DESTROYS T3 & T4
TTSBM:: DMOVE T3,(T1) ;FIRST TWO WORDS OF MASK
DMOVEM T3,TTCHR1(T2) ;SET NEW VALUES
DMOVE T3,2(T1) ;LAST TWO WORDS OF MASK
DMOVEM T3,TTCHR3(T2) ;SET LAST TWO WORDS
RET
;TTRBM - READ BREAK MASK
;ACCEPTS: T1/ADDRESS OF FOUR WORD AREA
; T2/DYNAMIC DATA ADDRESS
;RETURNS: +1, ALWAYS
; DESTROYS T3 & T4
TTRBM:: DMOVE T3,TTCHR1(T2) ;GET MASK VALUES
DMOVEM T3,(T1) ;FIRST TWO WORDS OF MASK
DMOVE T3,TTCHR3(T2) ;GET LAST TWO WORDS
DMOVEM T3,2(T1) ;AND STORE
RET
;TTSFW - SET THE FIELD WIDTH
;ACCEPTS: T1/FIELD WIDTH
; T2/DYNAMIC DATA ADDRESS
;RETURNS: +1,ALWAYS
TTSFW:: SUB T1,TTICT(T2) ;SUBTRACT NUMBER ALREADY IN BUFFER
JUMPLE T1,[ SETZRO TTFCNT,(T2) ;YES - DISABLE FIELD WIDTH
CALLRET TTFWAK] ;GO WAKE PROCESS
STOR T1,TTFCNT,(T2) ;SET THE FIELD WIDTH
RET
;TTRFW - READ THE FIELD WIDTH
;ACCEPTS:; T2/DYNAMIC DATA ADDRESS
;RETURNS: +1,ALWAYS
; T1/FIELD WIDTH
TTRFW:: LOAD T1,TTFCNT,(T2) ;READ THE FIELD WIDTH
RET
SWAPCD
;ROUTINE TO COMPUTE TT%WAK BITS FROM FULL CHARACTER BIT MASK
;ACCEPTS: T1/ TERMINAL MODE WORD
; T2/ DYNAMIC DATA ADDRESS
; CALL TTCBM
; RETURN +1, T1/ UPDATED TERMINAL MODE WORD
; T3/ CLOBBERED
; T4/ CLOBBERED
TTCBM: PUSH P,Q1 ;SAVE Q1
TXZ T1,TT%WAK ;WE SET THIS FIELD
TXZ T1,TT%IGN ;MAKE SURE THE "IGNORE" BIT IS OFF
MOVSI Q1,-NRPTB ;SET TO SCAN WORDS OF TABLE
XMOVEI T4,TTCHR1(T2) ;POINT TO BREAK MASK WORD 1
TTSW1: MOVE T3,0(T4) ;GET USER MASK
TDNE T3,RPTB(Q1) ;ANY PUNCTUATION HERE?
TXO T1,TT%WKP ;YES, SET WAKEUP ON PUNCT
TDNE T3,RATB(Q1) ;ANY ALPHANUMERICS HERE?
TXO T1,TT%WKA ;YES, SET WAKEUP ON ALPHA
AOS T4
AOBJN Q1,TTSW1 ;SCAN ALL MAK WORDS
POP P,Q1 ;RESTORE Q1
MOVE T3,TTCHR1(T2) ;GET USERS FIRST WORD
TXNE T3,MO%WN1-400 ;ANY FORMAT CONTROLS HERE?
TXO T1,TT%WKN ;YES, SET WAKEUP ON NON-FORMAT CTL
TXNE T3,MO%WF1-400 ;ANY FORMAT CONTROLS HERE?
TXO T1,TT%WKF ;YES, SET WAKEUP ON FORMAT CTL
TXNE T1,TT%WAK ;SPECIAL CASE FOR ESCAPE AND RUBOUT
RET ;ALL SET - ESCAPE AND RUBBOUT TAKEN CARE OF
TXNE T3,400 ;IS THERE AN ESCAPE?
TXO T1,TT%WKF ;YES - THEN SET IN TT%WAK
MOVE T3,TTCHR4(T2) ;SEE IF RUBOUT IS ON
TXNE T3,20
TXO T1,TT%WKF ;YES - THEN SET IT
RET
;PUNCTUATION MASK TABLE
RPTB: MO%WP1 ;0-37
MO%WP2 ;40-77
MO%WP3 ;100-137
MO%WP4-20 ;140-177
NRPTB==.-RPTB
;ALPHANUMERICS MASK TABLE
RATB: MO%WA1 ;0-37
MO%WA2 ;40-77
MO%WA3 ;100-137
MO%WA4-20 ;140-177
; ROUTINE TO COMPUTE AND SET FULL BREAK MASK FROM THE TT%WAK BITS
;
;ACCEPTS: T1/ MODE WORD
; T2/ ADDRESS OF DYNAMIC DATA
;RETURNS: +1, WITH MASK SET
TTCFM: STKVAR <<TTSMH1,2>,<TTSMH2,2>,<TTMS1,4>>
DMOVEM T3,TTSMH1 ;SAVE T3 & T4
DMOVEM Q1,TTSMH2 ;SAVE Q1 & Q2
SETZB T3,T4
SETZB Q1,Q2
TXNN T1,TT%WAK ;ARE ANY BITS SET?
JRST TTMSET ;NO - THEN CLEAR WAKE-UP MASK AND GO
TXO T3,400 ;SET THE ESCAPE BIT
TXO Q2,20 ;SET THE RUBOUT
TXNE T1,TT%WKF ;WANT FORMATTING CONTROLLS
TXO T3,MO%WF1 ;YES - SET FORMATTING CONTROLS
TXNE T1,TT%WKN ;WANT NON-FORMATTING CONTROLS?
TXO T3,MO%WN1 ;YES - SET THEM UP
TXNE T1,TT%WKP ;WANT PUNCTUATION?
JRST [ TXO T3,MO%WP1
TXO T4,MO%WP2
TXO Q1,MO%WP3
TXO Q2,MO%WP4
JRST .+1]
TXNE T1,TT%WKA ;WANT ALPHANUMERICS?
JRST [ TXO T3,MO%WA1
TXO T4,MO%WA2
TXO Q1,MO%WA3
TXO Q2,MO%WA4
JRST .+1]
TTMSET: DMOVEM T3,TTMS1 ;SAVE FIRST TWO WORDS OF MASK
XMOVEI T3,TTMS1 ;POINT TO SECOND TWO WORDS
ADDI T3,2
DMOVEM Q1,(T3) ; LAST TWO WORDS
MOVE T3,T1
XMOVEI T1,TTMS1 ;POINT TO FULL MASK
CALL TTSBM ;SET THE MASK
MOVE T1,T3
DMOVE T3,TTSMH1 ;RESTORE T3 AND T4
DMOVE Q1,TTSMH2 ; AND Q1 AND Q2
RET
;ROUTINE USED BY TEXTI TO COMPUTE PARITY FOR AN EDITING
;CHARACTER.
; T2/ THE CHARACTER.
;RETURNS +1 ALWAYS. WITH EVEN PARITY IN B
TTCMPP::SKIPGE CHITAB(T2) ;NEED PARITY ON THIS CHARACTER?
TRO T2,200 ;YES. SO DO IT
RET ;AND DONE
SUBTTL TTMSG JSYS
;TTMSG JSYS - SENDS MESSAGES TO ALL TTYS VIA ECHO BUFFER
;ACCEPTS:
; T1/ (0,,400000+N) WHERE N IS TERMINAL NUMBER
; OR
; -1 FOR ALL LINES
; T2/ POINTER TO SOURCE STRING
; TTMSG
;RETURNS +1: ALWAYS
;CAN ITERR, BUT RETURNS SUCCESS IF LINE REFUSES SENDALL
;NOTE: THE TTNTS BIT, WHICH PREVENTS SENDALL TO A GIVEN LINE, APPLIES
;TO TTMSG WITH T1 CONTAINING -1 (FOR ALL LINES), NOT WITH T1 CONTAINING
;A SPECIFIC LINE NUMBER
.TTMSG::MCENT
CALL CKMMOD ;IS CALLER IN MONITOR MODE?
JRST [ MOVE D,CAPENB ;NO. GET CAPS
TXNE D,SC%WHL!SC%OPR ;IS HE PRIVILEGED?
JRST .+1 ;YES. ALLOW IT
ITERR (GTDIX1)] ;NO. BOMB IT
CAME A,[-1] ;ALLOW -1 AS AN ARGUMENT
CAIL A,.TTDES ;MAKE SURE TTY ARGUMENT IS NOT TOO SMALL
CAIL A,.TTDES+NLINES ;AND NOT TOO LARGE
JRST MRETN ;YES, ILLEGAL TERMINALS ARE A NO-OP
TRVAR <TTMSBY,TTMSCT>
TLC B,-1
TLCN B,-1 ;HAD A -1 IN LH?
HRLI B,(POINT 7,) ;YES. GET STANDARD BYTE POINTER
UMOVEM B,B ;RETURN BYTE POINTER
SKIPGE P3,A ;STORE LINE NUMBER IN PERMANENT AC
JRST TTMS10 ;USER WANTS ALL LINES
;USER SPECIFIED LINE NUMBER. SEE IF DEVICE-DEPENDENT CODE WANTS TO DO
;A SENDALL
TRZ P3,.TTDES ;NO. GET JUST LINE NUMBER
MOVE B,P3
TDCALL S,VTTMSG ;WANT TO DO ONE? ;DO TTMSG FOR ONE LINE?
JRST MRETN ;NO.
;EITHER ONE LINE WAS SPECIFIED AND SENDALL IS TO BE DONE, OR ALL LINES
;WERE SPECIFIED. SET UP THE STRING IN A RESIDENT BLOCK
TTMS10: CALL GETSAL ;SET UP SNDALL BUFFER WITH ONE LINE
ITERR
;HERE WHEN BUFFER IS SET UP WITH TEXT. IF THERE ARE NO CHARACTERS,
;WE ARE DONE.
SKIPN TTMSCT ;AT LEAST ONE BYTE?
JRST TTMS55 ;NO. GO FINISH
;MESSAGE IS BUILT IN SNDALL BUFFER. IF SENDING TO ONE LINE, LET DEVICE CODE
;DECIDE WHETHER TO DO IT ITSELF OR RETURN HERE
JUMPL P3,TTMS20 ;SENDING TO ONE LINE?
MOVE B,P3 ;YES. GET LINE NUMBER
TDCALL S,VSNDA1 ;SENDALL FOR ONE LINE
JRST TTMS50 ;DONE OR NOT DOING. GO GET MORE TEXT
CALL SALLIN ;DO THE LINE
JFCL ;FAILED. IGNORE IT.
JRST TTMS50 ;GO SEE IF THERE IS MORE TEXT
;HERE WHEN DOING ALL LINES
TTMS20:
SETZ C, ;START WITH LINE TYPE 0
JRST TTMS26 ;GO GET ITS FIRST LINE
;GO TO NEXT LINE. IF THE LINE TYPE CHANGES, DON'T PROCEED WITH THE NEW
;LINE. INSTEAD, GO TO THE NEXT LINE TYPE AFTER THE ONE JUST PROCESSED.
;THIS CODE ASSUMES THAT ALL LINES OF A GIVEN TYPE ARE NUMBERED CONSECUTIVELY.
TTMS21: LOAD C,TTSTY,(B) ;GET CURRENT TYPE
ADDI B,1 ;GO TO NEXT LINE
CAIL B,NLINES ;BEYOND END OF LINES?
JRST TTMS24 ;YES. GO TO NEXT LINE TYPE
LOAD A,TTSTY,(B) ;GET TYPE OF NEW LINE
CAME C,A ;SAME AS PREVIOUS LINE?
JRST TTMS24 ;NO. GO TO NEXT LINE TYPE
;SAME LINE TYPE AS PREVIOUS ONE. DO ACCORDING TO DEVICE DEPENDENT CODE
;DEVICE-DEPENDENT CODE RETURNS:
; +1: DON'T DO THIS LINE
; +2 AND T2/-1: DON'T DO ANY LINES OF THIS TYPE
; +2 AND T2/LINE NUMBER: DO THIS LINE
MOVE A,TTLINV(C) ;POINT TO VECTOR FOR THIS LINE
CALL @VSNDAL(A) ;LET DEVICE CODE DO WHAT IT WANTS ;SENDALL FOR ALL LINES
JRST TTMS21 ;DON'T DO THIS LINE. GO ON TO NEXT LINE
JUMPL B,TTMS24 ;SKIP THE ENTIRE GROUP
;HERE WHEN DEVICE DEPENDENT CODE WANTS THE SENDALL DONE FOR IT
TTMS22: JN TTNTS,(B),TTMS21 ;DON'T DO IF NON-TERMINAL
CALL SALLIN ;DO SENDALL FOR THE LINE
JFCL ;FAILED. IGNORE IT.
JRST TTMS21 ;THEN GO GET NEXT LINE
;FINISHED THE CURRENT LINE TYPE OR THE LINE TYPE IS NOT TO BE PROCESSED
;GO TO THE NEXT TYPE
TTMS24: AOS C ;GO TO NEXT LINE TYPE
CAIL C,NLTYPS ;BEYOND END OF LEGAL TYPES?
JRST TTMS50 ;YES. DONE
;GET THE FIRST LINE OF THIS LINE TYPE
TTMS26: MOVE A,TTLINV(C) ;POINT TO VECTOR FOR THIS TYPE
MOVE B,TT1LIN(A) ;GET FIRST LINE OF THIS TYPE
CALL @VSNDAL(A) ;SEE WHAT DEVICE WANTS TO DO ;SENDALL FOR ALL LINES
JRST TTMS21 ;DON'T DO THIS LINE. GO ON TO NEXT LINE
JUMPL B,TTMS24 ;SKIP THE ENTIRE GROUP
JRST TTMS22 ;GO DO THIS LINE
;HERE WHEN ALL LINES HAVE BEEN PROCESSED FOR CURRENT BUFFERFUL.
;WAIT UNTIL ALL ARE SENT
TTMS50:
SKIPN SALCNT ;HAVE ALL THE LINES FINISHED?
JRST TTMS55 ;YES. DONE WITH THIS LINE OF TEXT
MOVEI A,TSTSAL ;A/ ROUTINE NAME
MDISMS ;WAIT UNTIL ALL LINES HAVE FINISHED
JRST TTMS55 ;DONE
RESCD
TSTSAL: SKIPE SALCNT ;ANY LINES STILL DOING SENDALL?
JRST 0(T4) ;YES. DON'T WAKE UP
JRST 1(T4) ;NO. WAKE UP
SWAPCD
TTMS55: SETZM SNDALL ;RELEASE SENDALL BUFFER
OKINT
SKIPE TTMSBY ;DID USER HAVE MORE TEXT?
JRST TTMS10 ;YES. GO GET IT
TTMS60: JRST MRETN
;GETSAL - GET SENDALL BUFFER AND STORE LINE OF TEXT IN IT
;RETURNS +1: FAILURE
; +2: SUCCESS,
; TTMSCT/ COUNT OF BYTES
; TTMSBY/ LAST BYTE
GETSAL: CALL ASGALL ;GET THE BUFFER
MOVE C,[POINT 8,SNDALL] ;POINTER TO DESTINATION
MOVNI D,4 ;NEG OF BYTES PER WORD
IMULI D,SNDSIZ ;CALCULATE BYTES IN BUFFER
HRLZS D ;FORM AOBJN WORD
;LOOP THROUGH CHARACTERS IN USER'S STRING, COPYING TO INTERNAL BUFFER.
;ADD FILL AFTER LINE FEED. STOP AT END OF LINE OR WHEN BUFFER IS FULL,
;WHICHEVER IS FIRST
GETSA1: XCTBUU [ILDB P1,B] ;GET NEXT BYTE
ERJMP [CALL INTALL ;FAILED, GO CLEAR THE DATABASE LOCK
OKINT ;ALLOW THE INTERRUPT
RETBAD(ARGX10)] ;AND RETURN TO CALLER
JUMPE P1,GETSA6 ;STOP ON NULL
ANDI P1,177 ;USE ONLY 7-BIT ASCII
SKIPL CHITAB(P1) ;NEED PARITY BIT?
JRST GETSA2 ;NO. DON'T TRY THEN
TRO P1,200 ;YES. APPLY IT THEN
GETSA2: IDPB P1,C ;USE IT
CAIE P1,.CHLFD ;A LINE FEED?
JRST GETSA5 ;NO. GO INCREMENT BYTE COUNT
;END OF LINE. INSERT 4 FILLS
MOVEI P4,4 ;FILLS TO DO
MOVEI P2,TTFILL ;THE FILL CHARACTER
GETSA3: AOBJN D,GETSA4 ;MAKE SURE IS ROOM
JRST GETSA6 ;BUFFER IS FULL
GETSA4: IDPB P2,C ;INSERT A FILL
SOJG P4,GETSA3 ;DO ALL FILLS
;FILL HAS BEEN ADDED. GO OUTPUT THE LINE UNLESS NO TEXT PRECEDED THE
;LINE FEED.
MOVEI P2,0(D) ;FIND OUT HOW MANY BYTES IN MESSAGE
CAILE P2,6 ;A NULL LINE?
JRST GETSA6 ;NO OUTPUT THIS LINE NOW
GETSA5: AOBJN D,GETSA1 ;INCREMENT COUNT OF MESSAGE, GO TO NEXT CHAR
GETSA6: HRRZM D,TTMSCT ;SAVE COUNT OF CHARACTERS
MOVEM P1,TTMSBY ;SAVE LAST BYTE COPIED
RETSKP
RESCD ;RESDIENT STUFF
INTALL: SETZM SNDALL ;DONE WITH THE BUFFER
RET ;GO BACK TO DTE SERVICE
WTALL: MOVEI A,SEEALL ;MUST WAIT FOR BUFFER
OKSKED ;TURN ON SCHEDULER
MDISMS ;WAIT HERE
RET ;GO TRY AGAIN
SEEALL: SKIPE SNDALL ;SCHEDULER TEST FOR BUFFER AVAILABLE
JRST 0(4) ;STILL IN USE
JRST 1(4) ;AVAILABLE
;ROUTINE TO GET THE SNDALL BUFFER
ASGALL: NOSKED ;MUST NOT BE INTERRUPTED
SKIPE SNDALL ;AVAILABLE?
JRST [ CALL WTALL ;NO. GO GET IT
JRST ASGALL] ;GO TRY AGAIN
SETOM SNDALL ;YES. GET IT
NOINT
OKSKED ;ALLOW SCHEDULING AGAIN
RET ;AND RETURN
;SALLIN - DO SENDALL TO A NON-FE LINE
;ACCEPTS:
; T2/ LINE NUMBER
SWAPCD
SALLIN:
SAVELN ;SAVE LINE NUMBER
STKVAR <SALLLN>
MOVEM T2,SALLLN ;SAVE LINE NUMBER
SALLI2: NOSKED
CALL STADYN ;DOES LINE ALREADY HAVE DYNAMIC DATA?
SKIPA ;NOT FULLY ACTIVE
JRST SALLI5 ;FULLY ACTIVE.
JUMPG T2,SALLI5 ;HAS A MESSAGE BLOCK. OK TO USE
JUMPL T2,[ OKSKED ;GO OKSKED FIRST
RET] ;LINE IS BECOMING ACTIVE. CAN'T USE IT
MOVE T2,SALLLN ;GET LINE NUMBER
SETOM TTACTL(T2) ;INDICATE BECOMING ACTIVE
OKSKED
CALL ASGSHT ;GO GET A SHORT BLOCK
JRST [ MOVE T2,SALLLN ;[7139]RESTORE LINE NUMBER
SETZM TTACTL(T2) ;RESET ACTIVE POINTER
RETBAD]
NOSKD1
TXO T1,1B0 ;SAY IS A SPECAIL
MOVEM T1,TTACTL(T2) ;SAVE DYNAMIC STORAGE ADDRESS
AOSG TTQCNT ;FIRST SPECIAL LINE?
MOVEM T2,TTCQLN ;YES. START SCAN HERE THEN
TXZ T1,1B0 ;MAKE ADDRESSABLE BLOCK
MOVE T2,T1
SALLI5: AOS SALCNT ;INCREMENT COUNT OF LINES DOING SENDALL
MOVE T1,[POINT 8,SNDALL]
STOR T1,TSALP,(T2) ;SAVE POINTER TO SENDALL STRING
MOVE T1,TTMSCT ;GET COUNT OF CHARACTERS
STOR T1,TSALC,(T2) ;SAVE COUNT OF SENDALL STRING
SETONE TTSAL,(T2) ;INDICATE LINE IS DOING A SENDALL
SETZ T3, ;FAKE OUT STRTOU
CALL STRTOU ;START OUTPUT IF NEEDED
RETSKP
;SIMULATE TTY INPUT
;ACCEPTS:
; T1/ CHARACTER
; T2/ INTERNAL LINE NUMBER
;CALL TTSTI
;RETURNS +1: ALWAYS
SWAPCD
TTSTI::
ANDI 1,377 ;ISOLATE CHARACTER
NOSKED
CAME 2,CTYINT ;CTY ALIAS?
CALL TTCHI ;NO. PUT CHAR INTO LINE BUFFER
JRST [ OKSKED ;FAILED, BUFFER FULL
RETBAD IOX33]
OKSKED
RETSKP
REPEAT 0,<
;OBNFT - SCHEDULER TEST FOR OUTPUT BUFFER NOT FULL
;ACCEPTS:
; T1/ INTERNAL LINE NUMBER
;CAUSES WAKEUP IF OUTPUT BUFFER IS NOT FULL
RESCD ;MUST BE RESIDENT
OBNFT: MOVE T2,T1 ;SETUP LINE
CALL STADYN ;GET ADDRESS OF DYNAMIC DATA
JRST 1(T4) ;SHOULDN'T HAPPEN. WAKE PROCESS
LOAD T3,TOMAX,(T2)
CAMG T3,TTOCT(T2) ;FULL?
JRST 0(T4) ;YES
JRST 1(T4) ;NO
>
SUBTTL STO JSYS
SWAPCD ;SWAPPABLE. CALLED AS A JSYS
.STO:: MCENT
STO11: UMOVE 1,1
CALL CHKTTY ;CHECK GIVEN DESIGNATOR
ITERR() ;NOT TTY
CALL LCKTTY ;GET ADDRESS OF DYNAMIC DATA AND PREVENT DEALLOCATION
JRST [ CALL ULKTTY
ITERR (TTYX01)] ;NOT ACTIVE. RETURN ERROR
CALL TTSTO
JRST STO11 ;BLOCKED. TRY AGAIN
UMOVEM 1,2 ;RETURN CHAR IN 2
CALL ULKTTY ;ALLOW DEALLOCATION OF DYNAMIC DATA
JRST MRETN
RESCD ;MAKE RESIDENT FOR EFFICIENCY
;TTSTO - REMOVE CHARACTER FROM OUTPUT BUFFER
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTSTO
;RETURNS +1: BLOCKED, TRY AGAIN
; +2 SUCCESS
; T1/ CHARACTER
TTSTO::
TTSTO2: NOSKD1
CHNOFF DLSCHN ;CAN'T ALLOW SCANNER PI HERE
SKIPG TTOCT(B) ;ARE THERE ANY CHARACTERS?
JRST TTSTO1 ;NO. WAIT
TDJRST D,VSTO ;STO JSYS
;LINE TYPE CURRENTLY NOT SUPPORTED. RETURN A NULL TO THE CALLER
TTSTO4: CHNON DLSCHN
OKSKD1
SETZ A,
RETSKP
;PHYSICAL LINE. DON'T TAKE CHARACTER IF OUTPUT IS ENROUTE TO THE LINE
TTSTO3: JN TTOTP,(B),TTSTO1 ;WAIT IF OUTPUT IS ACTIVE
;TAKE A CHARACTER FROM THE OUTPUT BUFFER
TTSTO5: SKIPN C,TTOOUT(2) ;GET OUT POINTER
BUG(TTOCN0)
HRRZ D,C
TDNN C,WRPMSK ;AT END OF THIS BUFFER?
HRR C,1-TTSIZ(4) ;YES. POINT TO NEXT BUFFER
MOVEM C,TTOOUT(2)
ILDB 1,TTOOUT(2) ;GET NEXT CHARACTER FROM OUTPUT BUFFER
TXZE A,TTOESC ;AN ESCAPE CHARACTER?
JRST [ LOAD D,TLTYP,(T2) ;GET LINE VECTOR
CAMN D,TTLINV+TT.PTY ;A PTY?
JRST .+1 ;YES. ALLOW IT THEN
MOVEM C,TTOOUT(B) ;NO. RESTORE BYTE POINTER
JRST TTSTO1] ;AND FORCE A BLOCK
;CHARACTER HAS BEEN REMOVED AND POINTER UPDATED. REDUCE COUNT OF
;CHARACTERS IN OUTPUT BUFFER AND RETURN CHARACTER TO CALLER
SOSG TTOCT(2) ;UPDATE COUNT OF CHARACTERS
CALL TTRLOB ;BUFFER IS EMPTY. RELEASE IT
CHNON DLSCHN
OKSKD1
CALL CHKWRN ;SEE IF OUTPUTTING FORK SHOULD WAKEUP
RETSKP
;WAIT UNTIL BUFFER BECOMES NONEMPTY AND LINE INACTIVE
TTSTO1: CHNON DLSCHN
OKSKD1
SETONE TTBKO,(T2) ;NOTE WAITING FOR OUTPUT EVENT
DYNST T1 ;GET STATIC LINE NUMBER
CALL ULKTTY
HRLZS T1 ;LINE NUMBER TO LH
HRRI T1,TTOAV ;TEST FOR BUFFER NOT EMPTY AND LINE INACTIVE
MDISMS ;WAIT UNTIL SPECIFIED TEST IS SATISFIED
RET ;SAY WE BLOCKED. TRY AGAIN
;TTOAV - SCHEDULER TEST FOR OUTPUT AVAILABLE ON A LINE
;ACCEPTS:
; T1/ INTERNAL LINE NUMBER
;CAUSES WAKEUP IF OUTPUT BUFFER IS NOT EMPTY AND LINE IS INACTIVE
TTOAV:: HRRZ T2,T1 ;GET LINE NUMBER
CALL STADYN ;GET ADDRESS OF DYNAMIC DATA
JRST 1(T4) ;NOT ACTIVE. THIS SHOULDN'T HAPPEN
OPSTR <SKIPN>,TTOTP,(T2) ;IS LINE ACTIVE?
SKIPN TTOCT(T2) ;NO. ARE THERE CHARACTERS?
JRST 0(T4) ;ACTIVE OR NO CHARACTERS AVAILABLE. DON'T WAKEUP
SETZRO TTBKO,(T2) ;NOTE WAIT COMPLETED
JRST 1(T4) ;INACTIVE AND CHARACTERS AVAILABLE. WAKEUP
SUBTTL STTYP/GTTYP JSYS'S
;.STTYP - SET TERMINAL TYPE
;ACCEPTS:
; T1/ TERMINAL DESIGNATOR
; T2/ TERMINAL TYPE NUMBER
; STTYP
;RETURNS +1: ALWAYS
SWAPCD
.STTYP::MCENT
CALL CHKTTY
ITERR () ;ASSUME CHKTTY SET UP ERROR REASON
UMOVE 3,2 ;GET TERMINAL TYPE SPECIFIED
CAIL 3,0 ;REASONABLE NUMBER?
CAIL 3,NTTYPS
ITERR (STYPX1) ;TERMINAL TYPE NOT IN RANGE
CALL LCKTTY ;GET DYNAMIC DATA AND PREVENT DEALLOCATION
JRST [ CALL ULKTTY ;NOT ACTIVE. ALLOW DEALLOCATION
ITERR (TTYX01)]
STOR 3,TTTYP,(2) ;STORE NEW TERMINAL TYPE
LDB 1,TTMBIT ;GET MECH BITS
DPB 1,[POINT 3,TTFLGS(2),3] ;PUT WHERE NOTICED
LDB 1,TTTWID ;GET STANDARD WIDTH
STOR 1,TPWID,(2) ;SET IT FOR THIS LINE
LDB 1,TTTLEN ;STANDARD LENGTH
STOR 1,TPLEN,(2) ;SET IF FOR THIS LINE
HRRZ T1,TTYPE1(T3) ;GET VIDEO ATTRIBUTES TABLE
SKIPE T1 ;IS THIS A VIDEO TERMINAL?
MOVEI T1,1 ;YES.
STOR T1,TTNXO,(T2) ;SET PAGE STOP BIT APPROPRIATELY
CALL ULKTTY ;ALLOW DEALLOCATION
JRST MRETN
;.GTTYP - GET TERMINAL TYPE
;ACCEPTS:
; T1/ TERMINAL DESIGNATOR
; GTTYP
;RETURNS +1: ALWAYS
; T2/ TERMINAL TYPE
; T3/ (NUMBER INPUT BUFFERS,,NUMBER OUTPUT BUFFERS)
.GTTYP::MCENT
CALL CHKTTR
JRST [ XCTU [SETZM 2] ;NOT TTY, RETURN 0
JRST MRETN]
CALL LCKTTY ;POINT TO DYNAMIC DATA AND PREVENT DEALLOCATION
JRST [ CALL ULKTTY ;NOT ACTIVE. ALLOW DEALLOCATION
ITERR (TTYX01)]
LOAD 1,TTTYP,(2) ;GET TERMINAL TYPE
UMOVEM 1,2
LOAD 1,TTNIN,(2) ;GET NUMBER OF INPUT BUFFERS
LOAD 3,TTNOU,(2) ;GET NUMBER OF OUTPUT BUFFERS
HRLI 3,0(1) ;COMBINE THEM FOR USER
UMOVEM 3,3
CALL ULKTTY ;ALLOW DEALLOCATION OF DYNAMIC DATA
JRST MRETN
SUBTTL STPAR JSYS
;.STPAR - SET TERMINAL PARAMETERS
;ACCEPTS:
; T1/ TERMINAL DESIGNATOR
; T2/ NEW JFN MODE WORD
; STPAR
;RETURNS +1: ALWAYS
.STPAR::MCENT
CALL CHKTTR ;[1844] IS THIS A TTY?
MRETNG ;[1844] NO, THEN THIS IS A NOOP
CALL CHKTTY ;[1844] CAN WE GET TO IT?
EMRETN () ;[1844] NO, ERROR OUT WITH REASON
CALL LCKTTY ;POINT TO DYNAMIC DATA AND PREVENT DEALLOCATION
JRST [ CALL ULKTTY ;NOT ACTIVE. ALLOW DEALLOCATION
ITERR (TTYX01)]
UMOVE 1,2 ;GET NEW JFN MODE WORD
TDCALL D,VSTPAR ;STPAR JSYS
; STPAR4 - COMMON CODE FOR STPAR JSYS (RETURN FROM FNCALL)
STPAR4: PUSH P,1
XOR 1,TTFLGS(2)
ANDI 1,TT%ECM+TT%UOC+TT%LIC+TT%DUM+TT%PGM ;CHANGE THESE BITS
XORM 1,TTFLGS(2)
TDCALL D,VSFEXO ;FIX XOFF RECOGNITION ;ENABLE/DISABLE FRONT-END XOFF RECOGNITION
PUSH P,1
TXNE 1,TT%PGM ;CHANGING PAGE MODE?
CALL TTXON ;YES, BE SURE OUTPUT NOT STOPPED
SETZ 1,
STOR 1,TPGPS,(2) ;AND RESET PAGE POSITION
POP P,1
LDB 1,[POINT 7,0(P),10]
JUMPE T1,STPAR2 ;ALLOW ZERO LENGTH
CAIL 1,2 ;LEGAL PAGE SIZE?
CAIL 1,200
JRST STPAR0 ;ILLEGAL SIZE DOES NOT CHANGE SETTING
STPAR2: STOR T1,TPLEN,(2)
STPAR0: LDB 1,[POINT 7,0(P),17]
JUMPE T1,STPAR3 ;ALLOW ZERO WIDTH
CAIL 1,10 ;LEGAL WIDTH
CAIL 1,200
JRST STPAR1 ;ILLEGAL WIDTHS DON'T CHANGE THE SETTING
STPAR3: STOR T1,TPWID,(2)
STPAR1: LDB 1,[POINT 3,0(P),3]
DPB 1,[POINT 3,TTFLGS(2),3] ;LH BITS
POP P,1
CALL ULKTTY ;ALLOW DEALLOCATION OF DYNAMIC DATA
JRST MRETN
SUBTTL TLINK JSYS
;.TLINK - ESTABLISH/REMOVE LINKS BETWEEN TERMINALS
;ACCEPTS:
; T1/ (FLAGS,,OBJECT LINE NUMBER)
; T2/ REMOTE LINE NUMBER OR -1 FOR ALL
; TLINK
;RETURNS +1: FAILURE
; T1/ ERROR CODE
; +2: SUCCESS
;FLAGS:
; TL%CRO - B0 - CLEAR REMOTE TO OBJECT
; TL%COR - B1 - CLEAR OBJECT TO REMOTE
; TL%EOR - B2 - SET OBJECT TO REMOTE
; TL%ERO - B3 - SET REMOTE TO OBJECT
; TL%SAB - B4 - SET OR CLEAR ACCEPT LINKS ACCORDING TO B5
; TL%ABS - B5 - SET ACCEPT LINKS
; TL%STA - B6 - SET OR CLEAR ACCEPT ADVICE ACCORDING TO B7
; TL%AAD - B7 - SET ACCEPT ADVICE
;'OBJECT' IS USUALLY THE CALLER OF THE JSYS; 'REMOTE' IS THE OTHER LINE
.TLINK::MCENT
TRVAR <OBJNO,OBJADR,REMNO,TLSAV1,LNKWRN>
SETOM LNKWRN ;ASSUME LINK MESSAGE IS NEEDED
MOVEI T1,-.TTDES(T1) ;TURN OBJECT DESIGNATOR INTO LINE NUMBER
CAIN T1,-1-.TTDES ;SPECIFIED -1 FOR OWN TERMINAL?
SKIPL T1,CTRLTT ;YES, GET IT
CAIL T1,NLINES ;VALIDATE LINE NUMBER
RETERR(DESX1) ;ILLEGAL
MOVEM T1,OBJNO ;SAVE LINE NUMBER
ADDI T1,.TTDES ;CREATE DESIGNATOR AGAIN
CALL CHKDEV ;SEE IF TERMINAL IS AVAILABLE TO THIS JOB
SKIPA T1,CAPENB ;NO, MUST CHECK WHEEL
JRST TLKOBG ;YES, PROCEED
TXNN T1,SC%WHL!SC%OPR ;PRIVILEGED TO LINK RANDOM TERMINALS?
RETERR (WHELX1) ;NO, LOSE
SETZM LNKWRN ;NO MESSAGE IS TYPED LATER
TLKOBG: MOVE T2,OBJNO ;GET BACK LINE NUMBER
CALL LCKTTY ;POINT TO DYNAMIC DATA, PREVENT DEALLOCATION
JRST [ CALL ULKTTY ;NOT ACTIVE.
RETERR (TTYX01)]
MOVEM T2,OBJADR ;SAVE ADDRESS OF DYNAMIC DATA FOR OBJECT
UMOVE 1,1 ;GET BITS AND OBJECT DESIGNATOR
TLNN 1,(74B5) ;SECOND DESIGNATOR REQUIRED?
JRST TL1 ;NO
;USER IS SETTING OR CLEARING LINKS. GET SECOND ARGUMENT, WHICH IS A LINE
;NUMBER (OR -1 FOR ALL LINES IF CLEARING LINKS)
XCTU [HRRZ 2,2]
CAIN 2,-1 ;'ALL' ?
JRST TL1 ;YES, LEAVE AS IS
TRZE 2,.TTDES ;4XXXXX?
JRST TL2 ;YES
MOVE 1,2 ;ASSUME REGULAR JFN
CALL CHKTTY
JRST TLINK9
TL2: CAIL 2,NLINES ;LEGAL LINE?
JRST TL3 ;NO. TOO LARGE
CAIL 2,0 ;NEGATIVE IS ILLEGAL
CAMN T2,CTYINT ;ALIAS FOR CTY?
TL3: JRST [ MOVEI T1,DESX1 ;INVALID LINE. FAIL
JRST TLINK9]
;T2/ LINE NUMBER FOR REMOTE OR -1
TL1: MOVEM T2,TLSAV1 ;SAVE REMOTE LINE NUMBER IF ANY
MOVE 7,OBJNO ;GET BACK OBJECT NUMBER
UMOVE 6,1 ;GET FUNCTION FLAGS
TXNE 6,TL%CRO ;CLEAR REMOTE TO OBJECT?
CALL TLINK0 ;YES. GO DO IT
TXNE 6,TL%COR
JRST [ CALL TLINK1 ;CLEAR OBJECT TO REMOTE
JRST TLINK9 ;FAILED. GO RETURN ERROR
JRST .+1]
TXNE 6,TL%EOR
JRST [ CALL TLINK2 ;SET OBJECT TO REMOTE
JRST TLINK9 ;FAILED
JRST .+1]
TXNE 6,TL%ERO
JRST [ CALL TLINK3 ;SET REMOTE TO OBJECT
JRST TLINK9
JRST .+1]
TXNE 6,TL%SAB
CALL TLINK4 ;SET ACCEPT BIT TO C(B5)
TXNE 6,TL%STA ;SET ADVICE BIT?
CALL TLINK5
MOVE T2,OBJADR ;T2/ ADDRESS OF OBJECT'S DATA
CALL ULKTTY ;ALLOW DEALLOCATION
SMRETN
;AN ERROR OCCURRED. UNLOCK DATA AND RETURN FAILURE
TLINK9: SKIPE T2,OBJADR ;T2/ ADDRESS OF OBJECT'S DATA
CALL ULKTTY ;ALLOW DEALLOCATION
RETERR ;RETURN ERROR CODE
;CLEAR REMOTE TO OBJECT
;ACCEPTS:
; TLSAV1/ REMOTE LINE NUMBER OR -1
; 7/ OBJECT LINE NUMBER
; CALL TLINK0
;RETURNS +1: ALWAYS
;DETERMINES WHETHER USER WANTS TO CLEAR ALL OR ONE. CALLS ROUTINE
;FOR EACH REMOTE LINE NUMBER
TLINK0: MOVE T2,TLSAV1 ;GET REMOTE LINE NUMBER
CAIE 2,-1 ;ALL REMOTES?
CALLRET TL0C ;NO, DO THE ONE SPECIFIED
;CLEAR LINKS FROM ALL REMOTES TO THIS OBJECT. LOOP THROUGH LINES
MOVEI 2,0 ;T2/ REMOTE LINE NUMBER
CALL TL0C ;CLEAR LINKS FROM REMOTE TO OBJECT
CAIGE 2,NLINES-1 ;AT END OF LINES?
AOJA 2,.-2 ;NO. KEEP GOING
RET ;YES. DONE
;TL0C - CLEAR ALL LINKS FROM SPECIFIED REMOTE TO OBJECT
;ACCEPTS:
; T2/ REMOTE LINE NUMBER
; 7/ OBJECT LINE NUMBER
;CALL TL0C
;RETURNS +1: ALWAYS
TL0C: SAVELN
CALL LCKTTY ;POINT TO DYNAMIC DATA FOR REMOTE
CALLRET ULKTTY ;NOT ACTIVE
TL0C1: CALL TLTST1 ;FIND LINK TO OBJECT IN REMOTE
JUMPL 1,TL0C2 ;DONE IF NO LINKS TO OBJ
MOVEI 1,777 ;FOUND ONE. CLEAR IT
DPB 1,5 ;CLEAR THE LINK JUST FOUND
JRST TL0C1 ;GO FIND ANOTHER
;DONE WITH THIS REMOTE LINE
TL0C2: CALLRET ULKTTY ;ALLOW DEALLOCATION FOR REMOTE
;TLINK1 - CLEAR OBJECT TO REMOTE
;ACCEPTS:
; 7/ OBJECT LINE NUMBER
; TLSAV1/ REMOTE LINE NUMBER OR -1
; CALL TLINK1
;RETURNS +1: FAILURE
; +2: SUCCESS
TLINK1: MOVE T2,TLSAV1 ;GET REMOTE LINE NUMBER
CAIE 2,-1 ;ALL?
CALLRET TL1C ;NO, CLEAR SPECIFIC
;CLEAR ALL LINKS FROM THIS OBJECT. LOOP THROUGH LINK WORD
MOVE 5,[POINT 9,TTLINK(4),-1] ;POINT TO LINK WORD
TL12: MOVE 4,OBJADR ;GET ADDRESS OF OBJECT'S DATA
ILDB 2,5 ;GET A LINE NUMBER
CAIN 2,777 ;IS THIS SLOT FREE?
JRST TL14 ;YES. SKIP IT
PUSH P,5 ;NO. SAVE BYTE POINTER
CALL TL1C ;GO CLEAR ALL LINKS TO THIS REMOTE
RETBAD (,<POP P,5>) ;SOME SORT OF FAILURE
POP P,5 ;RESTORE BYTE POINTER
TL14: TLNE 5,(7B2) ;AT END OF LINK WORD?
JRST TL12 ;NO. GO TO NEXT FIELD
RETSKP ;YES. DONE
;TL1C - CLEAR ALL LINKS FROM OBJECT TO THIS REMOTE
;ACCEPTS:
; T2/ REMOTE LINE NUMBER
; 7/ OBJECT LINE NUMBER
; CALL TL1C
;RETURNS +1: FAILURE
; +2: SUCCESS
TL1C: CALL TLTST2 ;FIND LINK TO REMOTE
JUMPL 1,RSKP ;NONE, DONE
;OBJECT POINTS TO REMOTE. DON'T ALLOW CLEARING IF REMOTE ALSO POINTS
;TO OBJECT
MOVE 1,CAPENB
TRNE 1,SC%WHL+SC%OPR ;PRIVILEGED?
JRST TL13 ;YES, SKIP CHECK
MOVEM T2,REMNO ;SAVE REMOTE LINE NUMBER
CALL LCKTTY ;POINT TO REMOTE DYNAMIC DATA
JRST [ CALL ULKTTY
JRST TL13]
PUSH P,5
CALL TLTST1 ;SEE IF REMOTE POINTS TO OBJECT
CALL ULKTTY ;UNLOCK REMOTE'S DATA
POP P,5 ;RESTORE POINTER TO REMOTE LINK WORD
JUMPGE 1,TL15 ;ERROR IF REMOTE POINTS TO OBJECT
TL13: MOVEI 1,777
DPB 1,5 ;CLEAR LINK JUST FOUND
MOVE T2,REMNO ;RESTORE REMOTE LINE NUMBER
JRST TL1C
TL15: RETBAD (TLNKX1)
;TLINK2 - SET OBJECT TO REMOTE
;ACCEPTS:
; 7/ OBJECT LINE NUMBER
; TLSAV1 / REMOTE LINE NUMBER OR -1
; CALL TLINK2
;RETURNS +1: FAILURE
; +2: SUCCESS
TLINK2: STKVAR <TLNKT>
MOVEI T2,5 ;MAX TRIES IF REMOTE IF REFUSING
MOVEM T2,TLNKT ;SAVE IT
TLNK2: MOVE T2,TLSAV1 ;GET REMOTE LINE NUMBER
CAIN 2,-1 ;SPECIFIED ALL?
RETBAD (DESX1) ;NON-SPECIFIC DESIGNATOR ILLEG HERE
CAMN 2,7 ;LINK TO SELF?
RETSKP ;YES, IGNORE
CALL TLTST2 ;LINK ALREADY EXISTS?
JUMPG 1,RSKP ;IGNORE IF YES
MOVEI T2,777 ;[1840] LOOK FOR AN EMPTY SLOT
CALL TLTST2 ;[1840] THAT WE COULD ACCEPT WITH
JUMPL T1,[RETBAD (TLNKX3)] ;[1840] ALL LINKS ARE IN USE ALREADY
MOVE T2,TLSAV1 ;[1840] GET BACK THE REMOTE LINE NUMBER
;IF REMOTE IS NOT ACCEPTING LINKS, RING THE BELL AND WAIT TO SEE IF
;USER DECIDES TO ACCEPT
CALL LCKTTY ;POINT TO REMOTE DYNAMIC DATA
JRST [ CALL ULKTTY
RETBAD (TTYX01)]
;REPEAT SEQUENCE OF CHECKING ACCEPT BIT, RINGING BELL, AND WAITING
;UNTIL EITHER REMOTE ALLOWS LINKS OR WE TIME OUT
TL21: MOVEI 3,TT%ALK ;ACCEPT BIT
MOVE 4,CAPENB
TRNN 4,SC%WHL+SC%OPR ;PRIVILEGED? OR
TDNE 3,TTFLGS(2) ;REMOTE ACCEPTING?
JRST TL22 ;YES
SOSGE TLNKT ;TRY AGAIN?
JRST TL24 ;NO. CAN'T DO THE LINK
CALL ULKTTY ;FREE REMOTE LOCK
SKIPE T2,OBJADR ;GET OBJECT ADDRESS
CALL ULKTTY ;FREE IT AS WELL
SETZM OBJADR ;SAY NO LOCK HERE
MOVEI 4,^D10 ;A RING IS 10 BELLS
TL23: NOSKED ;OWN MACHINE FOR A WHILE
HRROI T1,[BYTE (7) .CHBEL] ;GET A BELL
PUSH P,4 ;SAVE COUNTER
MOVE T2,TLSAV1 ;GET REMOTE LINE NUMBER
CALL TTEMES ;OUTPUT A BELL
HRROI T1,[BYTE (7) .CHBEL] ;GET A BELL AGAIN
MOVE T2,7 ;GET OBJECT LINE NUMBER
CALL TTEMES ;OUTPUT A BELL HERE TOO
POP P,4 ;RESTORE COUNTER
OKSKED ;RELEASE MACHINE NOW
SOJG 4,TL23
;..
;WAIT A WHILE
;..
MOVEI 1,^D3000 ;WAIT FOR 3 SECONDS, THE BELL WILL BE
DISMS ;RINGING FOR THE FIRST SECOND OF WAIT
MOVE T2,7 ;GET OBJECT LINE NUMBER
CALL LCKTTY ;LOCK IT UP
JRST [ CALL ULKTTY ;FREE IT
RETBAD (TTYX01)] ;AND GIVE ERROR
MOVEM T2,OBJADR ;SAY IT IS NOW LOCKED
JRST TLNK2 ;AND TRY AGAIN
;REMOTE IS ACCEPTING LINKS
TL22: CALL ULKTTY
MOVEI 2,777
CALL TLTST2 ;FIND FREE FIELD IN OBJECT
JUMPL 1,[RETBAD (TLNKX3)] ;LINKS FULL
MOVE T2,TLSAV1 ;GET REMOTE LINE NUMBER
DPB 2,5 ;DEPOSIT REMOTE NUMBER IN FIELD
MOVE T2,OBJADR ;GET OBJECT DYNAMIC DATA
CALL ULKTTY ;FREE IT
SETZM OBJADR ;NO LOCK HELD
SKIPN LNKWRN ;LINKING FROM MY OWN JOB?
JRST TL25 ;NO, SKIP MESSAGE
MOVE T1,OBJNO ;GET TERMINAL NUMBER
ADDI T1,.TTDES ;TURN INTO DESIGNATOR
HRROI 2,[ASCIZ /
LINK FROM /]
SETZ 3,
SOUT ;MSG ON OBJECT ALSO SEEN ON REMOTE
ERJMP TL25
MOVE 2,JOBNO
HRRZ 2,JOBDIR(2) ;USER ON THIS JOB
HRLI 2,USRLH ;TURN IT INTO A USER NUMBER
DIRST ;TYPE HIS NAME
JFCL
HRROI 2,[ASCIZ /, TTY /]
SOUT
ERJMP TL25
MOVE 2,7 ;OBJECT LINE NUMBER
MOVEI 3,10
NOUT
ERJMP TL25
HRROI T2,[ASCIZ /
/]
SETZ T3,
SOUT
ERJMP TL25
TL25: MOVE T2,7 ;GET OBJECT LINE NUMBER
CALL LCKTTY ;LOCK IT AGAIN
JRST [ CALL ULKTTY ;OOPS. WENT AWAY
RETBAD (TTYX01)] ;GIVE ERROR
MOVEM T2,OBJADR ;SAY HOLD LOCK
RETSKP
TL24: CALL ULKTTY
RETBAD (TLNKX2)
;TLINK3 - SET REMOTE TO OBJECT
;ACCEPTS:
; TLSAV1/ REMOTE LINE NUMBER OR -1
; 7/ OBJECT LINE NUMBER
; CALL TLINK3
;RETURNS +1: FAILURE
; +2: SUCCESS
TLINK3: MOVE T2,TLSAV1 ;GET REMOTE LINE NUMBER
CAIN 2,-1
RETBAD (DESX1) ;MULTIPLE DESIGNATOR ILLEGAL
CAMN 2,7 ;LINK TO SELF?
RETSKP ;YES, IGNORE
CALL LCKTTY
JRST [ CALL ULKTTY
RETBAD (TTYX01)]
CALL TLTST1 ;SEE IF REMOTE POINTS TO OBJECT
JUMPG 1,TL33 ;IF SO, ALREADY DONE
MOVE 1,CAPENB
TRNE 1,SC%WHL+SC%OPR ;PRIVILEGED?
JRST TL31 ;YES, SKIP CHECK
EXCH T2,TLSAV1 ;GET REMOTE LINE NUMBER
CALL TLTST2 ;SEE IF OBJECT POINTS TO REMOTE
JUMPL 1,[MOVEI T1,TLNKX1 ;IF NOT, ERROR
EXCH T2,TLSAV1 ;GET BACK REMOTE ADDRESS
CALLRET ULKTTY]
EXCH T2,TLSAV1 ;GET BACK ADDRESS OF REMOTE
TL31: PUSH P,7
MOVEI 7,777
CALL TLTST1 ;FIND FREE FIELD IN REMOTE
POP P,7
JUMPL 1,[MOVEI T1,TLNKX3
CALLRET ULKTTY]
DPB 7,5 ;DEPOSIT OBJ NUMBER IN FIELD
TL33: CALL ULKTTY
RETSKP
;TLINK4 - SET ACCEPT BIT
TLINK4: MOVE T2,OBJADR
MOVEI 1,TT%ALK ;IT IS BIT 26 IN TTFLGS
TLNE 6,(1B5) ;SET IT?
IORM 1,TTFLGS(T2) ;YES
TLNN 6,(1B5) ;CLEAR IT?
ANDCAM 1,TTFLGS(T2) ;YES
RET
;SET OR CLEAR ACCEPT ADVICE
TLINK5: MOVE T2,OBJADR
MOVEI 1,TT%AAD ;YES, GET BIT
TLNE 6,(1B7)
IORM 1,TTFLGS(T2) ;YES
TLNN 6,(1B7) ;CLEAR IT?
ANDCAM 1,TTFLGS(T2) ;YES
RET
;CHECK FOR EXISTENCE OF REMOTE TO OBJECT
;ACCEPTS:
; T2/ ADDRESS OF REMOTE
; 7/ OBJECT LINE NUMBER
; CALL TLTST1
;RETURNS +1: ALWAYS,
; T1/ NUMBER OF OBJECT
; OR
; -1 IF REMOTE DOESN'T POINT TO OBJECT
; 5/ BYTE POINTER TO LINK WORD FOR REMOTE
;CLOBBERS NO AC'S
TLTST1: MOVE 5,[POINT 9,TTLINK(2),-1]
TLT1: ILDB 1,5 ;SCAN REMOTE
CAMN 1,7 ;FOUND OBJECT?
RET ;YES
TLNE 5,(7B2) ;NO, SCANNED ALL FIELDS?
JRST TLT1 ;NO
SETO 1, ;YES, RETURN NEGATIVE VALUE
RET
;TLTST2 - CHECK FOR EXISTENCE OF OBJECT TO REMOTE
;ACCEPTS:
; T2/ REMOTE LINE NUMBER
; CALL TLTST2
;RETURNS +1: ALWAYS,
; T1/ NUMBER OF REMOTE
; OR
; -1 IF OBJECT DOESN'T POINT TO REMOTE
; 5/ BYTE POINTER TO LINK WORD FOR OBJECT WHERE REMOTE WAS FOUND
;CLOBBERS NO AC'S
TLTST2: MOVE 3,OBJADR ;GET ADDRESS OF OBJECT
MOVE 5,[POINT 9,TTLINK(3),-1] ;POINT TO LINK WORD IN OBJECT
TLT2: ILDB 1,5 ;SCAN OBJECT
CAMN 1,2 ;FOUND REMOTE?
RET ;YES
TLNE 5,(7B2) ;NO, SCANNED ALL FIELDS?
JRST TLT2 ;NO
SETO 1, ;YES, RETURN NEG VALUE
RET
SUBTTL MISCELLANEOUS GLOBAL ROUTINES
;NOTE: THE FOLLOWING ROUTINES WERE WRITTEN TO SOLVE A PARTICULAR PROBLEM;
;I. E., MODULES OTHER THAN TTYSRV WERE REFERENCING TELETYPE DATA. EACH
;OF THESE ROUTINES REPLACES CODE IN ONE OR MORE MODULES SO THAT THOSE
;MODULES NO LONGER REFERENCE TELETYPE DATA. ADDITIONS OF CALLS TO THESE
;ROUTINES MUST TAKE INTO ACCOUNT THE RULES ABOUT LOCKING/UNLOCKING DYNAMIC
;DATA.
;GTCJOB - GET JOB NUMBER FOR WHICH THIS IS THE CONTROLLING TERMINAL
;ACCEPTS: T2/ INTERNAL LINE NUMBER
; CALL GTCJOB
;RETURNS +1: LINE IS NOT ACTIVE
; +2: LINE IS ACTIVE,
; T3/ JOB NUMBER OF OWNING JOB
RESCD
GTCJOB::SAVELN
CALL STADYN ;POINT TO DYNAMIC DATA
RETBAD (TTYX01) ;LINE NOT FULLY ACTIVE
LOAD T3,TCJOB,(T2) ;GET OWNING JOB
RETSKP
;STCJOB - SET CONTROLLING JOB
;ACCEPTS:
; T1/ JOB NUMBER
; T2/ LINE NUMBER
; CALL STCJOB
;RETURNS +1: ALWAYS
SWAPCD
STCJOB::CALL LCKTTY
CALLRET ULKTTY
STOR T1,TCJOB,(T2)
CALLRET ULKTTY
;GTTOPF - GET TOP FORK OF A SCTTY GROUP
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL GTTOPF
;RETURNS +1: LINE NOT ACTIVE
; +2: LINE IS ACTIVE,
; T3/ FORK NUMBER OF TOP FORK (OR -1)
RESCD
GTTOPF::SAVELN
CALL STADYN ;POINT TO DYNAMIC DATA
RETBAD (TTYX01) ;LINE NOT FULLY ACTIVE
LOAD T3,TTPFK,(T2) ;GET TOP FORK
RETSKP
;STTOPF - SET TOP FORK OF A SCTTY GROUP
;ACCEPTS:
; T1/ FORK NUMBER OR -1 TO STORE IN TTPFK
; T2/ INTERNAL LINE NUMBER
; CALL STTOPF
;RETURNS +1: ALWAYS
STTOPF::SAVELN
CALL LCKTTY ;POINT TO DYNAMIC DATA
CALLRET ULKTTY ;NOT AN ACTIVE LINE
STOR T1,TTPFK,(T2) ;STORE NEW FORK DATA
STTOPX: CALLRET ULKTTY
SWAPCD
;GTWFRK - GET NUMBER OF FORK IN INPUT WAIT ON THIS TERMINAL
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL GTWFRK
;RETURNS +1: ALWAYS,
; T1/ NUMBER OF FORK OR -1 IF NONE
RESCD
GTWFRK::SAVELN
CALL STADYN
JRST GTWFR1
LOAD T1,TWFRK,(T2)
RET
GTWFR1: MOVEI T1,-1
RET
;TTCLFK - CLEAR WAITING FORK ON TERMINAL
;ACCEPTS:
; T2/ LINE NUMBER
; CALL TTCLFK
;RETURNS +1: ALWAYS
SWAPCD
TTCLFK::
NOSKED ;PREVENT RESCHEDULING
CALL STADYN ;GET TTY'S DATA BASE
JRST TTCLF1 ;NOT ACTIVE. IGNORE IT
SETONE TWFRK,(T2) ;INDICATE NO WAITING FORK
TTCLF1: OKSKED ;ALL DONE
RET
;PTYTTY - CONVERT PTY NUMBER TO INTERNAL LINE NUMBER (TTY NUMBER)
;ACCEPTS:
; T2/ PTY NUMBER
; CALL PTYTTY
;RETURNS +1: ALWAYS
; T2/ INTERNAL LINE NUMBER
;CLOBBERS NO ACS
SWAPCD
PTYTTY::PUSH P,T1 ;SAVE TEMPORARY
MOVE T1,TTLINV+TT.PTY ;POINT TO VECTOR TABLE
ADD T2,TT1LIN(T1) ;ADD NUMBER OF FIRST PTY LINE TO GET LINE NO.
POP P,T1 ;RESTORE TEMPORARY
RET
;TTYPTY - CONVERT INTERNAL LINE NUMBER TO PTY NUMBER
;ACCEPTS:
; T1/ INTERNAL LINE NUMBER
; CALL TTYPTY
;RETURNS +1:ALWAYS,
; T1/ PTY NUMBER
;CLOBBERS NO ACS
RESCD
TTYPTY::ACVAR <W1> ;GET A WORK REGISTER
MOVE W1,TTLINV+TT.PTY ;POINT TO VECTOR TABLE
SUB T1,TT1LIN(W1) ;SUBTRACT FIRST PTY LINE TO GET PTY NUMBER
RET
ENDAV. ;[2607] END ACVAR
;CHKPTY - SEE IF THIS LINE NUMBER IS A PTY
;ACCEPTS:
; T1/ INTERNAL LINE NUMBER
; CALL CHKPTY
;RETURNS +1: NOT A PTY
; +2: A PTY
; T1/ PTY NUMBER
CHKPTY::ACVAR <W1> ;GET AN AC TO WORK WITH
LOAD W1,TTSTY,(T1) ;GET LINE TYPE FOR THIS LINE
CAIE W1,TT.PTY ;IS IT A PTY?
RETBAD ;NO. FAILURE
CALL TTYPTY ;CONVERT TO PTY NUMBER
RETSKP ;RETURN SUCCESS
SWAPCD
ENDAV. ;[2607] END ACVAR
;CKPHYT - SEE IF THIS IS A PHYSICAL TERMINAL
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL CKPHYT
;RETURNS +1: NOT A PHYSICAL TERMINAL
; +2: A PHYSICAL TERMINAL
;PRESERVES AC'S
RESCD
CKPHYT::ACVAR <W1> ;GET A WORK AC
TDJRST S,VCKPHY ;CKPHYT - SEE IF PHYSICAL TERMINAL
ENDAV. ;[2607] END ACVAR
;CLRINT - CLEAR INTERRUPT WORD FOR A GIVEN LINE
;ACCEPTS:
; T1/ INTERRUPT BIT
; T2/ LINE NUMBER
; CALL CLRINT
;RETURNS +1: ALWAYS
CLRINT::CALL LCKTTY ;POINT TO DYNAMIC DATA, PREVENT DEALLOCATION
CALLRET ULKTTY ;NOT FULLY ACTIVE. IGNORE
ANDCAM T1,TTPSI(T2) ;CLEAR INTERRUPT BIT
CLRIN1: CALLRET ULKTTY ;ALLOW DEALLOCATION
;TTSINT - SET UP INTERRUPT WORD FOR TERMINAL
;ACCEPTS:
; T1/ DESIRED CONTENTS OF TTPSI
; T2/ INTERNAL LINE NUMBER
; T3/ DESIRED CONTENTS OF TTDPSI
;RETURNS +1: ALWAYS
SWAPCD
TTSINT::SAVELN
CALL LCKTTY ;GET ADDRESS OF DYNAMIC DATA
CALLRET ULKTTY ;NOT FULLY ACTIVE
MOVEM T1,TTPSI(T2) ;STORE INTERRUPT WORD
MOVEM T3,TTDPSI(T2) ;STORE DEFERRED INTERRUPT WORD
CALLRET ULKTTY ;ALLOW DEALLOCATION
;CKBJFN - SEE IF BKJFN HAS ALREADY BEEN DONE ON THIS LINE
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL CKBJFN
;RETURNS +1: BKJFN HAS NOT BEEN DONE
; +2: BKJFN HAS ALREADY BEEN DONE
SWAPCD
CKBJFN::SAVELN
CALL STADYN ;GET ADDRESS OF DYNAMIC DATA
RETBAD ;NOT ACTIVE. BKJFN HAS NOT BEEN DONE
JN TTRFG,(T2),RSKP ;IF FLAG SET, BKJFN HAS BEEN DONE
RETBAD ;OTHERWISE, HASN'T BEEN DONE
;TTCKAD - SEE IF LINE IS ACCEPTING ADVICE
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTCKAD
;RETURNS +1: NOT ACCEPTING ADVICE
; +2: ACCEPTING ADVICE
TTCKAD::
JE TT%AAD,TTFLGS(T2),R ;IF NOT, NONSKIP
RETSKP ;INDICATE ACCEPTING
;GTBPTY - GETAB ROUTINE TO GET PTY INFO
;RETURNS +1: ALWAYS
; T1/ (NUMBER OF PTYS,,FIRST PTY NUMBER)
GTBPTY::HRLI T1,NTTPTY ;NUMBER OF PTYS
MOVE T2,TTLINV+TT.PTY ;POINT TO VECTOR TABEL
HRR T1,TT1LIN(T2) ;GET FIRST LINE NUMBER
RET
;GTBTTF - GETAB ROUTINE FOR TTFORK TABLE
;ACCEPTS:
; T2/ LINE NUMBER
;RETURNS +1: ALWAYS,
; T1/ (CONTROLLING JOB,,WAITING FORK)
; OR
; -1 IF LINE IS INACTIVE
; OR
; (-2,,-1) IF JOB IS BEING CREATED ON THE LINE
GTBTTF::CALL LCKTTY ;POINT TO DYNAMIC DATA, PREVENT DEALLOCATION
JRST GTBTT1 ;NOT ACTIVE.
JN TTPRM,(T2),[ JE TTBAC,(T2),.+1 ;IF PERMANENT, AND BECOMING
HRLOI T1,-2 ; ACTIVE, RETURN (-2,,-1)
CALLRET ULKTTY] ;GO CLEAN UP
;LINE IS EITHER FULLY ACTIVE AND NOT PERMANENT, OR PERMANENT AND NOT BECOMING ACTIVE.
;GET OWNING JOB AND WAITING FORK AND RETURN THEM
LOAD T1,TWFRK,(T2) ;GET WAITING FORK
LOAD T3,TCJOB,(T2) ;GET OWNING JOB
HRL T1,T3 ;COMBINE THEM
CALLRET ULKTTY
;LINE IS NOT FULLY ACTIVE. RETURN -1 IF INACTIVE, (-2,,-1) IF
;BECOMING ACTIVE
GTBTT1: SETOM T1 ;NOT ACTIVE. INDICATE NO OWNER OR FORK
SKIPGE T2 ;IS JOB BEING CREATED ON THIS LINE?
HRLI T1,-2 ;YES. INDICATE THAT
CALLRET ULKTTY ;ALLOW DEALLOCATION
;STPRM - SET THE PERMANENT BIT IN DYNAMIC DATA
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL STPRM
;RETURNS +1: ALWAYS
STPRM:: SETONE TTPRM,(T2)
RET
;CLRPRM - CLEAR THE PERMANENT BIT
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL CLRPRM
;RETURNS +1: ALWAYS
CLRPRM::SETZRO TTPRM,(T2)
RET
;CKINP - CHECK FOR INPUT BUFFER EMPTY
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL CKINP
;RETURNS +1: INPUT BUFFER IS EMPTY
; +2: INPUT BUFFER IS NOT EMPTY
RESCD
CKINP:: CALL LCKTTY ;POINT TO DYNAMIC DATA, PREVENT DEALLOCATION
CALLRET ULKTTY ;NOT ACTIVE. INDICATE NO CHARACTERS
SKIPE TTICT(T2) ;ACTIVE. ANY INPUT CHARACTERS?
JRST [ CALL ULKTTY ;YES. ALLOW DEALLOCATION
RETSKP] ;INDICATE NON-ZERO COUNT
CALLRET ULKTTY ;ALLOW DEALLOCATION INDICATE ZERO COUNT
;TTCKSP - ROUTINE CALLED FROM SYSINE TO SEE IF THIS LINE NEEDS A SET SPEED
;DONE BEFORE JOB INITIALIZATION
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL TTCKSP
;RETURNS +1: ALWAYS
;THIS IS RELEVANT FOR REMOTE FRONT END LINES ONLY. WHEN A JOB LOGS OFF OF A REMOTE
;LINE AND THE NEXT CARRIER-ON INTERRUPT COMES IN ON THIS LINE,
;BIT TTFSP IN TTFWED IS SET, INDICATING THAT THE SPEED MUST BE RESET
;TO THE DEFAULT. THIS ROUTINE LOOKS FOR THAT BIT
;THE (INPUT,,OUTPUT) SPEEDS ARE IN TTSPWD FOR THIS LINE
SWAPCD
TTCKSP::
JE <TTFEM,TTFSP>,(B),R ;IF NOT REMOTE, GO AWAY
;OR IF DON'T NEED SPEED SETTING
SETZRO TTFSP,(B) ;CLEAR SPEED SETTING REQUIRED
OPSTR <SKIPN>,TTAUT,(B) ;NON-AUTO LINE?
SKIPG C,TTSPWD(B) ;HAVE A SPEED TO SET?
RET ;NO. GIVE IT UP
MOVEI A,.TTDES(B) ;A/ DEVICE DESIGNATOR FOR THIS LINE
MOVEI B,.MOSPD ;B/ THE FUNCTION
MTOPR ;GO SET THE SPEED
ERJMP .+1 ;[6702] IGNORE FAILURE (ACJ REFUSAL)
RET ;AND DONE
;INIT SPEED WORDS
TTSPIN::
MOVSI B,-NLINES ;ONLY DO THE REAL LINES
SETOM TTSPWD(B) ;INITIALIZE THE LINE SPEEDS
AOBJN B,.-1 ;DO ALL LINES
ret ;all done
;TTHNGU - HANG UP DATASET
;ACCEPTS:
; T2/ LINE NUMBER
; CALL TTHNGU
;RETURNS +1: ALWAYS
;CALLED BY THE LGOUT JSYS IF THE JOB ON THIS LINE WAS NOT LOGGED IN.
SWAPCD
TTHNGU::
CAMN 2,CTYLNO ;IS THIS THE CTY?
RET ;YES. DON'T HANG IT UP
PUSH P,T2 ;SAVE LINE NUMBER
CALL LCKTTY ;POINT TO DYNAMIC DATA, PREVENT DEALLOCATION
JRST TTHNG1 ;NOT ACTIVE. CAN'T HAVE OUTPUT
CALL TTDOBE ;WAIT TILL NO OUTPUT
JRST [ POP P,T2 ;GET BACK LINE
JRST TTHNGU] ;TRY AGAIN
TTHNG1: CALL ULKTTY ;ALLOW DEALLOCATION
POP P,T2 ;RESTORE LINE NUMBER
TDJRST S,VHNGUP ;GO DO DEVICE DEPENDENT HANGUP ;HANGUP, REACTIVATE REMOTE LINE
;TTABRT - ROUTINE TO ABORT JOB STARTUP
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL TTABRT
;RETURNS +1: ALWAYS
;THIS ROUTINE IS CALLED BY JOBSRT WHEN IT CANNOT START A JOB
;BECAUSE OF SOME FULL CONDITION. IF THE LINE IS NOT A PERMANENT
;BLOCK, TTACTL SHOULD BE -1; THIS ROUTINE SETS IT TO 0. IF THE LINE
;IS A PERMANENT BLOCK, TT%BAC SHOULD BE SET; THIS ROUTINE CLEARS IT
;THIS ALLOWS TTEMES TO SEND THE 'FULL' TO THE LINE
RESCD
TTABRT::SAVELN
SKIPG T3,TTACTL(T2) ;IS LINE ACTIVE?
JRST [ SETZM TTACTL(T2) ;INDICATE NOT ACTIVE
RET]
SETZRO TTBAC,(T3) ;INDICATE NOT BECOMING ACTIVE
RET
SUBTTL BUFFER CONTROL
;ASSIGN AND SETUP TTY BUFFERS
; 3/ NUMBER OF BUFFERS TO GET
; RETURNS +1 TRANSPARENT, EXCEPT
; 3/ BYTE POINTER FOR INPUT AND OUTPUT POINTER WORDS
;THIS ROUTINE ASSUMES THAT IT IS PROTECTED FROM RESCHEDULING
RESCD
TTGTBF: PUSH P,1 ;TRANSPARENT TO ALL AC'S EXCEPT 3
PUSH P,4
PUSH P,3 ;SAVE COUNT
SETZ 1,
TTGTB1: CHNOFF DLSCHN
SOSGE TTFREC ;REDUCE FREE BUFFER COUNT
JRST TTGTB3 ;NONE LEFT
HRRZ 3,@TTFREB ;GET BUFFER FROM LIST
EXCH 3,TTFREB
CHNON DLSCHN
HRRZ 4,1
JUMPE 1,[MOVSI 1,0(3) ;FIRST BUFFER, REMEMBER ITS ADDRESS
JRST .+2]
HRRZM 3,0(4) ;CONC NEW BUFFER ONTO LIST
HRRI 1,0(3)
SOSLE 0(P) ;GOT REQUESTED NUMBER OF BUFFERS?
JRST TTGTB1 ;NO
HLRZ 3,1 ;ADDRESS OF FIRST BUFFER IN LIST
HRRZ 4,1 ;ADDRESS OF LAST BUFFER IN LIST
HRRZM 3,0(4) ;MAKE LAST POINT TO FIRST
ADD 3,[XWD 441100,1] ;CONSTRUCT 9-BIT BYTE POINTER
AOS -3(P) ;GIVE GOOD RETURN
TTGTB2: ADJSP P,-1 ;JUNK
POP P,4
POP P,1
RET
TTGTB3: BUG(TTYNTB)
AOS TTFREC ;GIVE BACK FRUITLESS SOS
CHNON DLSCHN ;RESTORE THE CHANNEL
HRRZ 4,1
JUMPE 1,TTGTB2 ;RETURN IF THERE WERE NONE
HLRZ 3,1 ;COMPLETE THE ONES WE GOT
HRRZM 3,0(4)
ADD 3,[441100,,1]
CALL TTRLBF ;THEN GIVE THEM BACK
JRST TTGTB2
;RELEASE LIST OF TTY BUFFERS
; 3/ BYTE POINTER ANYWHERE IN ANY BUFFER OF LIST
; RETURNS +1, CLOBBERS 3
; PRESERVES 1
;ASSUMES INTERRUPT PROTECTION AS ABOVE
TTRLBF: MOVEI 3,0(3)
JUMPE 3,R ;IN CASE NO BUFFERS
PUSH P,1
TDNN 3,WRPMSK ;NOW AT END OF BUFFER?
SUBI 3,TTSIZ ;YES
ANDCM 3,WRPMSK ;NORMALIZE POINTER TO FIRST WD OF BFR
ADDI 3,1 ;WHICH IS 1 AFTER THE 0 MOD TTSIZ
PUSH P,3 ;SAVE ADDRESS OF FIRST BUFFER
PUSH P,[0] ;DON'T CHNOFF IF ALREADY OFF
CONSO PI,1B<DLSCHN+^D28>
SETOM 0(P) ;INDICATE ALREADY OFF
TTRLB1: MOVEI 1,0(3)
HRRZ 3,0(3) ;NEXT BUFFER IN LIST
SKIPN 0(P) ;LEAVE CHANNEL ALONE
CHNOFF DLSCHN
EXCH 1,TTFREB ;PUT BUFFER ON FREE LIST
MOVEM 1,@TTFREB
AOS TTFREC
SKIPN 0(P) ;NO CHANNEL ON IF ALREADY OFF
CHNON DLSCHN
CAME 3,-1(P) ;CIRCLED AROUND TO FIRST BUFFER?
JRST TTRLB1 ;NO
ADJSP P,-2 ;RESTORE STACK
POP P,1
RET
;TTRLOB - RELEASE OUTPUT BUFFERS
;ACCEPTS:
; T1/ ADDRESS OF DYNAMIC DATA
; RETURNS +1: ALWAYS
;CLOBBERS 3 BUT PRESERVES 1
;LINE MAY BE FULLY ACTIVE OR ACTIVE WITH A MESSAGE BLOCK
;ASSUMES INTERRUPT PROTECTION AS ABOVE
TTRLOB: SKIPN 3,TTOOUT(2) ;OUTPUT BUFFERS TO RELEASE?
RET ;NO
SETZM TTOCT(T2) ;CLEAR COUNT OF BYTES
SETZM TTOOUT(2) ;YES. CLEAR OUTPUT POINTER
SETZM TTOIN(2) ;CLEAR INPUT POINTER
CALL CHKBKO ;PERHAPS FORK WAITING FOR OBUF EMPTY
CALLRET TTRLBF ;RELEASE THEM
SUBTTL CHARACTER INFORMATION TABLE (CHITAB)
RESCD
;CHARACTER INFORMATION TABLE
;B0 - PARITY BIT FOR CHARACTER
;B12-17 - CHARACTER WAKEUP CLASS
;B18-35 - DISPATCH ADDRESS (CONTROL CHARACTERS ONLY)
PCLASS: POINT 6,CHITAB(1),17 ;POINTER TO CLASS BITS
AN==1 ;ALPHANUMERIC CLASS BIT
PC==2 ;PUNCTUATION CLASS BIT
CT==4 ;CONTROL (NON-FORMATTING) CLASS BIT
FC==10 ;FORMATTING CONTROL CLASS BIT
DEFINE CH(PAR,CLS,DSP)<
IFNB <DSP>,<<PAR>B0+<CLS>B17+DSP>
IFB <DSP>,<<PAR>B0+<CLS>B17+TCOUT>>
CHITAB::CH(0,CT) ; 0 NULL
CH(1,CT) ; 1 ^A
CH(1,CT) ; 2 ^B
CH(0,CT) ; 3 ^C
CH(1,CT) ; 4 ^D
CH(0,CT) ; 5 ^E
CH(0,CT) ; 6 ^F
CH(1,CT) ; 7 ^G
CH(1,FC,TTSM4) ; 10 ^H BACKSPACE
CH(0,PC,TTSM1) ; 11 ^I TAB
CH(0,FC,TTSM12) ; 12 ^J LF
CH(1,CT) ; 13 ^K
CH(0,FC,TTSM3) ; 14 ^L FORMFEED
CH(1,FC,TTSM5) ; 15 ^M CR
CH(1,CT) ; 16 ^N
CH(0,CT) ; 17 ^O
CH(1,CT) ; 20 ^P
CH(0,CT) ; 21 ^Q
CH(0,CT) ; 22 ^R
CH(1,CT) ; 23 ^S
CH(0,CT) ; 24 ^T
CH(1,CT) ; 25 ^U
CH(1,CT) ; 26 ^V
CH(0,CT) ; 27 ^W
CH(0,CT) ; 30 ^X
CH(1,CT) ; 31 ^Y
CH(1,CT) ; 32 ^Z
CH(0,17,TTSME) ; 33 ^[ ESC
CH(1,CT) ; 34 ^\
CH(0,CT) ; 35 ^]
CH(0,CT) ; 36 ^^
CH(1,CT) ; 37 ^_
CH(1,PC) ; 40 SPACE
CH(0,PC) ; 41 !
CH(0,PC) ; 42 "
CH(1,PC) ; 43 #
CH(0,PC) ; 44 $
CH(1,PC) ; 45 %
CH(1,PC) ; 46 &
CH(0,PC) ; 47 '
CH(0,PC) ; 50 (
CH(1,PC) ; 51 )
CH(1,PC) ; 52 *
CH(0,PC) ; 53 +
CH(1,PC) ; 54 ,
CH(0,PC) ; 55 -
CH(0,PC) ; 56 .
CH(1,PC) ; 57 /
CH(0,AN) ; 60 0
CH(1,AN) ; 61 1
CH(1,AN) ; 62 2
CH(0,AN) ; 63 3
CH(1,AN) ; 64 4
CH(0,AN) ; 65 5
CH(0,AN) ; 66 6
CH(1,AN) ; 67 7
CH(1,AN) ; 70 8
CH(0,AN) ; 71 9
CH(0,PC) ; 72 :
CH(1,PC) ; 73 ;
CH(0,PC) ; 74 <
CH(1,PC) ; 75 =
CH(1,PC) ; 76 >
CH(0,PC) ; 77 ?
CH(1,PC) ; 100 @
CH(0,AN) ; 101 A
CH(0,AN) ; 102 B
CH(1,AN) ; 103 C
CH(0,AN) ; 104 D
CH(1,AN) ; 105 E
CH(1,AN) ; 106 F
CH(0,AN) ; 107 G
CH(0,AN) ; 110 H
CH(1,AN) ; 111 I
CH(1,AN) ; 112 J
CH(0,AN) ; 113 K
CH(1,AN) ; 114 L
CH(0,AN) ; 115 M
CH(0,AN) ; 116 N
CH(1,AN) ; 117 O
CH(0,AN) ; 120 P
CH(1,AN) ; 121 Q
CH(1,AN) ; 122 R
CH(0,AN) ; 123 S
CH(1,AN) ; 124 T
CH(0,AN) ; 125 U
CH(0,AN) ; 126 V
CH(1,AN) ; 127 W
CH(1,AN) ; 130 X
CH(0,AN) ; 131 Y
CH(0,AN) ; 132 Z
CH(1,PC) ; 133 [
CH(0,PC) ; 134 \
CH(1,PC) ; 135 ]
CH(1,PC) ; 136 ^
CH(0,PC) ; 137 _
CH(0,PC) ; 140 `
CH(1,AN) ; 141 a
CH(1,AN) ; 142 b
CH(0,AN) ; 143 c
CH(1,AN) ; 144 d
CH(0,AN) ; 145 e
CH(0,AN) ; 146 f
CH(1,AN) ; 147 g
CH(1,AN) ; 150 h
CH(0,AN) ; 151 i
CH(0,AN) ; 152 j
CH(1,AN) ; 153 k
CH(0,AN) ; 154 l
CH(1,AN) ; 155 m
CH(1,AN) ; 156 n
CH(0,AN) ; 157 o
CH(1,AN) ; 160 p
CH(0,AN) ; 161 q
CH(0,AN) ; 162 r
CH(1,AN) ; 163 s
CH(0,AN) ; 164 t
CH(1,AN) ; 165 u
CH(1,AN) ; 166 v
CH(0,AN) ; 167 w
CH(0,AN) ; 170 x
CH(1,AN) ; 171 y
CH(1,AN) ; 172 z
CH(0,PC) ; 173 {
CH(1,PC) ; 174 |
CH(0,PC) ; 175 }
CH(0,PC) ; 176 ~
CH(1,17) ; 177 RUBOUT
SUBTTL TCO (FIRST LEVEL OUTPUT)
;OUTPUT CHARACTER TO TERMINAL
; TCO - FIRST LEVEL, TRANSLATE ACCORDING TO PROGRAM DESIRES
; TOCY- SECOND LEVEL, DO LINKS AND FORMAT FOR PARTICULAR DEVICE
; TCOUT-THIRD LEVEL, DO BUFFERING ETC.
;TCO - FIRST LEVEL OUTPUT
;ACCEPTS:
; T1/ CHARACTER (UP TO 9 BITS)
; T2/ ADDRESS OF DYNAMIC DATA
;RETURNS +1: ALWAYS
;CALLED BY BOUT CODE FOR A SINGLE CHARACTER
TCO:: LOAD T3,TT%DAM,TTFLGS(T2) ;GET TERMINAL DATA MODE
JUMPE T3,TCOB1 ;GO DO BINARY MODE
PUSH P,1 ;NO. SAVE THE CHARACTER
ANDI 1,177 ;T1/ CHARACTER IN 7 BITS
CAIE T3,.TTATE ;[3019] TRANSLATE ECHO ONLY?
JRST TCOE1 ;[3019] NO. SOME OUTPUT TRANSLATION REQUIRED
CAIE T1,.CHESC ;[3019] AN ESC?
JRST TC1B ;[3019] NO
CALL TCOUT ;[3019] YES, NO TRANSLATE
JRST TC1C ;[3019]
;TCOE - ECHO OUTPUT
;ACCEPTS:
; T1/ CHARACTER
; T2/ ADDRESS OF DYNAMIC DATA
;RETURNS +1: ALWAYS
;THIS IS A SPECIAL ENTRY POINT USED BY TTCH7 (IN SCHEDULER CONTEXT)
;FOR IMMEDIATE ECHOING AND BY TCI FOR DEFERRED ECHOING.
;IF TCOUT IS UNABLE TO OUTPUT THE CHARACTER AND IS BEING CALLED
;FROM THE SCHEDULER, IT WILL SET TCOERR TO -1.
;THE SCHEDULER MUST CLEAR THIS WORD BEFORE CALLING AND CHECK IT UPON RETURN
;IF IN PROCESS CONTEXT AND UNABLE TO OUTPUT, IT WAITS UNTIL IT CAN DO
;THE OUTPUT
;NOTE: APPARENTLY THIS CODE IS NEVER CALLED IF TERMINAL DATA MODE IS BINARY
TCOE: OPSTR <SKIPE>,TTNXO,(T2) ;DOING PAGE STOP?
JRST [ SETZRO TPGPS,(T2) ;YES. CLEAR LINE POSITION WITHIN PAGE
JRST .+1] ; TO PREVENT XOFF
PUSH P,1 ;SAVE THE CHARACTER
ANDI 1,177 ;T1/ CHARACTER IN 7 BITS
CAIN 1,.CHDEL ;RUBOUT?
JRST TC1C ;YES, DON'T ECHO
LOAD T3,TT%DAM,TTFLGS(T2) ;GET TERMINAL DATA MODE
CAIE T3,.TTASC ;TRANSLATE OUTPUT AND ECHO?
CAIN T3,.TTATE ;NO. TRANSLATE ECHO ONLY?
JRST TCOE1 ;YES. ECHO TRANSLATION REQUIRED
JRST TC1B ;NO ECHO TRANSLATION
;CONTROL CHARACTER TRANSLATION IS REQUIRED (OUTPUT OR ECHOING).
;IF THIS IS A CONTROL CHARACTER, DO THE TRANSLATION. OTHERWISE,
;CALL LEVEL 2
TCOE1: CAIL 1,40 ;CONTROL GROUP?
JRST TC1B ;NO. GO CALL LEVEL 2 CODE
;..
;TCO..
;TRANSLATE CONTROL CHARS ACCORDING TO CC OUTPUT CONTROL MODES IN FCMOD1/FCMOD2
; 00 - SEND NOTHING
; 01 - INDICATE, E.G. ^A
; 1X - DO FUNCTION (SECOND LEVEL HANDLES SIMULATION IF NECESSARY)
; 10 - SEND ACTUAL CODE
; 11 - SIMULATE FORMAT ACTION
;..
MOVE 4,FCMOD2(2)
MOVE 3,FCMOD1(2) ;GET MODE BITS
ROTC 3,0(1)
ROTC 3,0(1)
CAIN 1,.CHESC ;ESC SPECIAL CASE?
JRST [ TLNN 3,(3B1) ;YES, FLUSH CASE?
JRST TC1C ;YES
TLNN 3,(1B1)
JRST TC1B ;10 CASE, OUTPUT REAL CHAR
TLNN 3,(1B0)
JRST TC1D ;01 CASE, INDICATE WITH ^[
MOVEI 1,"$" ;11 CASE, 'SIMULATE' WITH $
JRST TC1B]
;DETERMINE ACTION ACCORDING TO CONTROL CHARACTER OUTPUT CONTROL BITS
TLNE 3,(1B0) ;DO?
JRST TC1B ;YES. CALL LEVEL 2 TO SEND CODE
; OR SIMULATE FORMAT ACTION
TLNN 3,(1B1) ;FLUSH?
JRST TC1C ;YES. DON'T SEND ANYTHING
;INDICATE CONTROL CHARACTER BY ^
TC1D: ADDI 1,100 ;CONVERT TO PRINTING EQUIV.
PUSH P,1
MOVEI 1,TTCIND ;GET ^
SKIPE IMECHF ;ECHOING?
AOS LINKF ;YES. FORCE IT OUT
CALL TCOY ;PRINT INDICATOR
POP P,1 ;GET BACK THE CHARACTER
CALL TCOY ;OUTPUT THE CHARACTER
SKIPE IMECHF ;DOING ECHO?
SOS LINKF ;YES.
JRST TC1C ;GO RETURN
;CALL LEVEL 2 TO OUTPUT THE CHARACTER. IF NECESSARY, IT WILL
;DO CONTROL CHARACTER SIMULATION
TC1B: CALL TCOY ;CALL LEVEL 2
TC1C: POP P,1 ;RETURN THE CHARACTER
RET
;TCOB - ENTRY FOR BINARY OUTPUT. NO TRANSLATION
;ACCEPTS:
; T1/ CHARACTER (UP TO 9 BITS)
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TCOB
;RETURNS +1: ALWAYS
TCOB::
TCOB1: ANDI T1,377 ;7 BITS OF CHARACTER + PARITY
CALLRET TCOU1 ;GO OUTPUT THE CHARACTER WITHOUT ADDING PARITY
SUBTTL TCOY (SECOND LEVEL OUTPUT)
;SECOND LEVEL - HANDLE DEVICE IDEOSYNCRACIES AND CHAR ACCOUNTING
;ACCEPTS:
; T1/CHARACTER IN 7 BITS
; T2/ ADDRESS OF DYNAMIC DATA
;IMECHF IS -1 IF THIS CHARACTER IS BEING OUTPUT FOR IMMEDIATE ECHOING
;WHEN TAKEN OUT OF TTBBUF BY TTCH7
;CALLED FROM TCO (FIRST LEVEL OUTPUT). BY NOW, IF THIS IS A CONTROL
;CHARACTER, THE CONTROL CHARACTER OUTPUT CONTROL SPECIFIED EITHER
; 10 - SEND ACTUAL CODE
; OR
; 11 - SIMULATE FORMAT ACTION
;WE CAN ALSO GET HERE WHEN TT%DAM HAS .TTATO SET AND WE ARE DOING ECHO
;OR TT%DAM HAS .TTATE AND WE ARE DOING OUTPUT
TCOY: PUSH P,5
PUSH P,6
PUSH P,7
CAIN 1,.CHDEL
JRST [ CALL TCOUT ;RUBOUT, SEND DIRECTLY
JRST TCOY3]
SKIPE IMECHF ;IMMED ECHO CHAR?
JRST [ MOVE 3,TTFLGS(2) ;YES, CHECK DUPLEX BITS
TXNN T3,TT%ECO ;IS ECHOING OFF?
JRST TCOY3 ;YES - THEN DON'T ECHO
SKIPN LINKF ;LINKED CHAR? OR
TRCN 3,3B33 ;FULL?
JRST .+1 ;YES
CALL TTCOHA ;ACCOUNT SPACING FOR CHAR
CAIGE 1,40 ;IS CONTROL CHAR AND MODE 2?
TRNN 3,3B33
JRST [ MOVE T3,TTLINK(T2) ;NO. GET LINK WORD
CAME T3,[-1] ;ANY LINKS?
CALL TTLNK3 ;YES. DO THEM
JRST TCOY3] ;AND DONE
JRST TTCO1] ;YES, ECHO CONTROL FN
;EITHER NOT IMMEDIATE ECHOING OR IMMEDIATE ON A FULL-DUPLEX TERMINAL
;IF CONTROL CHARACTER, GO HANDLE SPECIALLY
CAIGE 1,40
JRST TTCO1 ;CONTROL GROUP
;NOT A CONTROL CHARACTER. RAISE IF NECESSARY
MOVE 3,TTFLGS(2)
TXNE 3,TT%LCA ;TERMINAL HAS LOWER CASE?
JRST TTCO6 ;YES, NO TRANSLATION NEEDED
CAIL 1,"A" ;UPPER CASE LETTER?
CAILE 1,"Z"
JRST [ CAIL 1,"A"+40 ;NO, LOWER CASE LETTER?
CAILE 1,"Z"+40
JRST TTCO6 ;NO
SUBI A,40 ;YES, CONVERT TO UPPER CASE
JRST TTCO6]
;CHARACTER IS UPPER CASE. IF FLAGGING IS REQUIRED, CALL THIRD LEVEL
;ROUTINE TO PRINT A '^' BEFORE PRINTING THE CHARACTER
TXNN 3,TT%UOC ;INDICATE?
JRST TTCO6 ;NO
PUSH P,1 ;YES, SAVE CHAR
MOVEI 1,TTLIND ;OUTPUT INDICATOR
CALL TCOP
POP P,1
TTCO6: CALL TCOP ;OUTPUT CHAR AND ACCOUNT SPACE
TCOY3: POP P,7
POP P,6
POP P,5
RET
;TCOP - SECOND LEVEL SUBROUTINE - OUTPUT SINGLE SPACING CHARACTER
;ACCEPTS:
; T1/ THE CHARACTER IN 7 BITS
; T2/ ADDRESS OF DYNAMIC DATA FOR THIS LINE
; CALL TCOP
TCOP: AOS T3,TTLPOS(T2) ;GET CURRENT POSITION ON LINE
;INCREMENT COUNT
HRRZS T3
LOAD 4,TPWID,(T2) ;GET RIGHT MARGIN
JUMPE 4,TCOUT ;0 MEANS NEVER FOLD
CAIL 4,0(3) ;CHECK FOR OVERFLOW
CALLRET TCOUT ;NO OVERFLOW, OUTPUT CHAR
;REACHED END OF LINE. HANDLE WRAPAROUND AND GO BACK TO OUTPUT THE CHARACTER
PUSH P,1 ;LINE OVERFLOW, DO CR AND CONTINUATION
MOVEI 1,15 ;T1/ CARRIAGE RETURN
CALL TTSM5 ;DO CR
MOVEI 1,12 ;T1/ LINE FEED
CALL TTSM2 ;DO LF
SETZRO TLNPS,(T2) ;RESET LINE POSITION TO 0
REPEAT 0,< ;** FOLD INDICATION DISABLED
MOVEI 1,2 ;COUNT 2 *'S
HRRM 1,TTLPOS(2)
MOVEI 1,52
CALL TCOUT
CALL TCOUT
>
POP P,1
JRST TCOP ;GO OUTPUT THE CHARACTER
;TTCOHA - ACCOUNT SPACING PERFORMED BY HALF-DUPLEX TERMINAL
;TERMINAL HAS PRINTED THE CHARACTER. THIS MERELY ACCOUNTS FOR THE
;RESULTING POSITION ON THE TERMINAL
;ACCEPTS:
; T1/ CHARACTER IN 7 BITS
; T2/ ADDRESS OF DYNAMIC DATA
TTCOHA: CAIL 1,40 ;SPACING CHAR?
JRST [ INCR TLNPS,(T2) ;YES. INCREMENT POSITION ON LINE
RET]
;;;; CAIE T1,.CHLFD ;[7141] LF?
CAIN 1,15 ;CR?
JRST [ SETZRO TLNPS,(T2) ;YES. RESET TO LEFT MARGIN
RET]
CAIN 1,.CHLFD ;LF?
CALLRET INCLIN ;COUNT LINES
CAIN 1,.CHFFD ;FF?
JRST [ SETZRO TPGPS,(T2) ;YES. RESET TO TOP OF PAGE
RET]
CAIE 1,.CHBSP ;BACKSPACE?
RET ;NO
JE TLNPS,(T2),R ;YES. IF NOT AT LEFT MARGIN,
DECR TLNPS,(T2) ; DECREMENT CHARACTER POSITION WITHIN PAGE
RET
SUBTTL TCOY FOR CONTROL CHARACTERS
;HERE WHEN THE CHARACTER TO BE OUTPUT IS A CONTROL CHARACTER
;ACCEPTS:
; T1/CHARACTER IN 7 BITS
; T2/INTERNAL LINE NUMBER
;THIS IS PART OF THE SECOND LEVEL OUTPUT AND IS CALLED BY TCOY.
;CHITAB CONTAINS THE ROUTINE THAT WILL PROCESS THE CHARACTER
;IN SOME CASES, IT CONTAINS TCOUT, THE THIRD LEVEL ROUTINE.
;IN OTHER CASES, IT CONTAINS A SPECIAL ROUTINE, WHICH DOES SOME TRANSLATION
;AND THEN CALLS TCOUT
;FOR EACH CHARACTER, ACTION IS CONTROLLED BY TWO BITS IN FCMOD1 OR FCMOD2:
; 00 => IGNORE, DO NOT SEND
; 01 => SEND PRINTING INDICATION (I.E. &C)
; 10 => SEND ACTUAL CODE AND ACCOUNT LINE AND PAGE POSITION
; 11 => SIMULATE FORMAT ACTION AND ACCOUNT
;WHEN THIS CODE IS CALLED, LEVEL 1 OUTPUT HAS ALREADY HANDLED THE
;TRANSLATION OF CONTROL CHARACTER IF MODE 0 OR 1 IS IN EFFECT
TTCO1: MOVE 4,FCMOD2(2) ;SECOND CONTROL MODES WORD
MOVE 3,FCMOD1(2) ;FIRST CONTROL MODES WORD
ROTC 3,0(1) ;GET TWO BIT MODE FOR THIS CHAR
ROTC 3,0(1)
HRRZ 4,CHITAB(1) ;GET DISPATCH ADDRESS
CALL 0(4) ;DISPATCH TO FORMAT ROUTINE
JRST TCOY3
;TAB
;ACCEPTS:
; T1/ THE CHARACTER IN 7 BITS
; T2/ ADDRESS OF DYNAMIC DATA
; T3/ CONTROL CHARACTER OUTPUT CONTROL BITS IN BITS 0-1
; CALL TTSM1
TTSM1: PUSH P,3 ;SAVE OUTPUT MODE
LOAD 3,TLNPS,(2) ;OLD POSITION
IDIVI T3,TABSIZ ;COMPUTE SPACES BEYOND CURRENT STOP
MOVEI 7,TABSIZ
SUB 7,T4 ;COMPUTE SPACES TO NEXT STOP
POP P,3 ;MODE WORD
MOVSI 4,(1B2) ;HAS-TAB BIT
TLNN 3,(1B1) ;SIMULATE REQUESTED?
TDNN 4,TTFLGS(2) ;OR NO MECH TAB ON DEVICE?
JRST TTSM13 ;YES, GO SIMULATE
MOVEI 1,.CHTAB ;SEND REAL TAB
CALL TCOUT
MOVE 4,7 ;PLUS RUBOUTS TO KILL TIME
IDIVI 4,4 ;ASSUME FOUR SPACES PER RUBOUT
LOAD 3,TTTYP,(2) ;GET TYPE OF TERMINAL
LDB 1,TTTBPD ;GET NUMBER PADS PER FOUR SPACES
IMULI 4,0(1)
JUMPLE 4,TTSM14
PUSH P,7 ;SAVE NEW POSITION
MOVEI 7,0(4) ;ITERATION
TTSM16: MOVEI 1,TTFILL
CALL TCOUT
SOJG 7,.-1
POP P,7 ;RESTORE LINE POSTION
TTSM14: OPSTR <ADD 7,>,TLNPS,(2) ;UPDATE POSITION
STOR 7,TLNPS,(2)
RET
TTSM13: MOVEI 1,40 ;SIMULATE WITH SPACES
CALL TCOP ;SEND ONE
SOJG 7,TTSM13 ;SEND ALL OF THEM
RET
;LINE FEED
;ACCEPTS:
; T1/ THE CHARACTER IN 7 BITS
; T2/ ADDRESS OF DYNAMIC DATA
; T3/ CONTROL CHARACTER OUTPUT CONTROL BITS IN BITS 0-1
; CALL TTSM12
TTSM12: TXNN T3,<1B1> ;CODE 2?
JRST TTSM2 ;YES, DO LF ONLY
MOVEI T1,.CHCRT ;DO CR FIRST
OPSTR <SKIPE T3,>,TLNPS,(T2)
CALL TTSM5
MOVEI T1,.CHLFD ;THEN LF
;..
;LOCAL LINEFEED - DOES NOT INCLUDE CR
TTSM2: CALL INCLIN ;ACCOUNT FOR LINE
LOAD 3,TPLEN,(T2) ;GET PAGE LENGTH
JUMPE 3,TTSM2X ;NO CHECK IF LENGTH 0
LOAD 1,TPGPS,(2) ;GET CURRENT PAGE POSITION
CAML 1,3 ;PAGE FULL?
JRST [ SETZRO TPGPS,(2) ;YES. RESET TO TOP OF PAGE
CALL TTXOFF ;DO XOFF IF IN PAGE MODE
JRST .+1]
TTSM2X: MOVEI 1,.CHLFD ;GET LINE FEED
CALL TCOUT ;OUTPUT LINE FEED
LOAD 3,TTTYP,(2) ;GET TERMINAL TYPE
LDB 5,TTLFPD ;LF PADDING
CALLRET TTSPAD ;DO PADDING
;ROUTINE TO KEEP LINE COUNTER AND MAX UPDATED.
INCLIN: SAVET ;PRESERVE TEMPS
INCR TPGPS,(T2) ;INCREMENT LINE POSITION ON PAGE
AOS A,TTLINE(B) ;INCREMENT LINE COUNTER
CAMLE A,TTLMAX(B) ;NEW MAXIMUM?
MOVEM A,TTLMAX(B) ;YES, REMEMBER IT
RET
;FORM FEED
;ACCEPTS:
; T1/ THE CHARACTER IN 7 BITS
; T2/ ADDRESS OF DYNAMIC DATA
; T3/ CONTROL CHARACTER OUTPUT CONTROL BITS IN BITS 0-1
TTSM3: LOAD 4,TPGPS,(2) ;GET PRESENT PAGE POSITION
SETZRO TPGPS,(T2) ;RESET TO TOP OF PAGE
PUSH P,3
LOAD 3,TPLEN,(2) ;PAGE SIZE
JUMPE T3,[SETZM 5 ;IF ZERO PAGE LENGTH, SAY AT THE END
JRST TTSM34]
IDIVI 4,0(3)
SUBM 3,5 ;5/ DIFFERENCE TO END OF PAGE
TTSM34: POP P,3
MOVSI 4,(1B1)
TDNE 4,TTFLGS(2) ;DEVICE HAS MECH FF?
TLNE 3,(1B1) ;AND SEND DIRECT REQUESTED?
JRST TTSM32 ;NO, SIMULATE FF
CALL TCOUT ;SEND REAL CHARACTER
LOAD 3,TTTYP,(2) ;GET TERMINAL TYPE
LDB 5,TTFFPD ;FF PADDING
CALL TTSPAD ;DO PADDING
JRST TTSM3Y
;SIMULATE FORM FEED BY OUTPUTTING AS MANY LINE FEEDS AS ARE NEEDED
;TO GET TO THE TOP OF THE NEXT PAGE
TTSM32: PUSH P,TTLPOS(2) ;SAVE LINE AND PAGE POSITIONS
PUSH P,5 ;SAVE NUMBER OF LINES LEFT IN PAGE
TTSM33: CALL TTSM2 ;SIMULATE ONE FORM FEED
SETZRO TPGPS,(T2) ;PREVENT TTSM2 FROM DOING X-OFF
SOSLE 0(P) ;COUNT LF'S
JRST TTSM33 ;LOOP ON LF'S
POP P,5 ;FLUSH TEMP
POP P,TTLPOS(2) ;RESTORE LINE AND PAGE POSITIONS
TTSM3Y: LOAD 1,TPLEN,(2) ;CHECK PAGE LENGTH
JUMPE T1,R ;DO XOFF UNLESS PLENGTH IS 0
CALLRET TTXOFF ;DO XOFF
;ROUTINE TO INSERT PADDING
;ACCEPTS:
; T1/ THE CHARACTER IN 7 BITS
; T2/ ADDRESS OF DYNAMIC DATA
; T3/ CONTROL CHARACTER OUTPUT CONTROL BITS IN BITS 0-1
; 5/ NUMBER OF FILLS TO SEND
; CALL TTSPAD
; RETURN +1 ALWAYS
TTSPAD: MOVEI 1,TTFILL ;FILLER
JUMPLE 5,R ;DONE IF COUNT EXHAUSTED
CALL TCOUT ;SEND ONE
SOJA 5,TTSPAD ;COUND DOWN RUBOUTS
;BACKSPACE
;ACCEPTS:
; T1/ THE CHARACTER IN 7 BITS
; T2/ ADDRESS OF DYNAMIC DATA
; T3/ CONTROL CHARACTER OUTPUT CONTROL BITS IN BITS 0-1
TTSM4: LOAD 4,TLNPS,(2) ;GET LINE POSITION
JUMPE 4,TTSM45 ;IF AT BEGINNING SKIP REST
MOVE 4,TTFLGS(2) ;GET CURRENT LINE STATE
TRNN 4,3B33 ;IN HALF DUPLEX?
JRST [ DECR TLNPS,(T2) ;NO. ACCOUNT FOR BACKSPACE
JRST .+1]
TTSM45: TLNN 3,200000 ;REAL OR SIMULATED
CALLRET TCOUT ;NO. OUTPUT DIRECTLY
MOVEI 1,15 ;SIMULATE WITH CR AND SPACES (UGH)
CALL TCOUT
LOAD 4,TLNPS,(2) ;GET CHARACTER POSITION WITHIN LINE
TTSM44: MOVEI 1,40 ;GET SPACE
JUMPE 4,R ;IF AT LEFT MARGIN, QUIT
PUSH P,4 ;SAVE COUNTER
CALL TCOUT ;OUTPUT A SPACE
POP P,4 ;RESTORE COUNTER
SOJA 4,TTSM44 ;DO ALL NECESSARY SPACES
;CARRIAGE RETURN
;ACCEPTS:
; T1/ THE CHARACTER IN 7 BITS
; T2/ ADDRESS OF DYNAMIC DATA
; T3/ CONTROL CHARACTER OUTPUT CONTROL BITS IN BITS 0-1
TTSM5: MOVEI 1,.CHCRT ;T1/ CARRIAGE RETURN
CALL TCOUT ;OUTPUT THE CARRIAGE RETURN
LOAD 4,TLNPS,(2) ;GET CHARACTER POSITION WITHIN LINE
SETZRO TLNPS,(2) ;RESET LINE POSITION
LOAD 3,TTTYP,(2) ;GET TERMINAL TYPE
LDB 5,TTCRPD ;CR PADDING
IMULI 4,0(5) ;COMPUTE POSN/72*PAD, I.E. PAD IS
ADDI 4,^D71 ;AMOUNT FOR 72 CHAR LINE, SO PRO-RATE
IDIVI 4,^D72 ;BASED ON FULLNESS OF LINE, ROUNDING
MOVEI 5,0(4) ;PAD COUNT UP TO NEXT INTEGER
CALLRET TTSPAD ;DO PADDING
;ESC
;ACCEPTS:
; T1/ THE CHARACTER IN 7 BITS
; T2/ ADDRESS OF DYNAMIC DATA
; T3/ CONTROL CHARACTER OUTPUT CONTROL BITS IN BITS 0-1
TTSME: TLNN 3,(3B1) ;00?
RET ;YES, NO SEND
TLNE 3,(1B1) ;01 OR 11?
JRST [ MOVEI 1,"$" ;YES, SEND $
CALLRET TCOP]
CALLRET TCOUT ;SEND ACTUAL CODE
;TTXON - DO 'XON' - CLEAR STOP FLAG AND RESTART OUTPUT TO TERMINAL IF NECESSARY
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTXON
;RETURNS +1: ALWAYS
;CALLED IN ANY OF THE FOLLOWING CASES:
; CLEAR OUTPUT BUFFER
; STPAR
; USER TYPES XON
TTXON: TDJRST D,VXON ;PROCESS XON FROM TERMINAL
TTXON2: SETZRO TTSFG,(T2) ;CLEAR CTRL/S
MOVE 3,TTOCT(2) ;GET COUNT OF CHARACTERS IN OUTPUT BUFFER
NOSKD1 ;NOSKED FOR STRTOU CALL
CALLRET STRTOU ;RESTART OUTPUT
;TTXOFF - STOP OUTPUT TO A TERMINAL
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
;CALLED WHEN OUTPUT TO A TERMINAL CAUSES THE PAGE TO FILL UP. IF TERMINAL
;IS IN PAGE MODE, PUTS SPECIAL CHARACTER IN OUTPUT STREAM TO CAUSE 'XOFF' ACTION
;WHEN ENCOUNTERED AT INTERRUPT LEVEL
TTXOFF: MOVX 1,TT%PGM
OPSTR <SKIPE>,TTNXO,(T2) ;DOING PAGE STOP?
TDNN 1,TTFLGS(2) ;IN PAGE MODE?
RET ;NO, DO NOTHING
MOVEI 1,"G"-100 ;OUTPUT BELL TO TELL USER THAT
CALL TCOUT ; HE MUST RESTART OUTPUT
MOVEI 1,TTOPFC ;PUT SPECIAL FUNCTION CODE IN OUTPUT
CALLRET TCOU3 ; STREAM TO STOP OUTPUT AT THAT POINT
SUBTTL TCOUT (THIRD LEVEL OUTPUT)
;OUTPUT ONE CHARACTER TO SPECIFIED TTY LINE
;ACCEPTS:
; T1/ CHARACTER IN 7 BITS
; T2/ ADDRESS OF DYNAMIC DATA
;RETURNS +1: ALWAYS
;IF IN SCHEDULER AND UNABLE TO SEND CHARACTER, SETS TCOERR TO -1
;SPECIAL ENTRY POINT WHEN ENTERING FROM TTEMES
;ACCEPTS:
; T1/ CHARACTER
; T2/ ADDRESS OF DYNAMIC DATA (FULL-LENGTH OR TTEMES BLOCK)
;RETURNS +1: ALWAYS
;IF UNABLE TO SEND CHARACTER AND IN SCHEDULER, SETS TCOERR TO -1
SCDTCO: SKIPL CHITAB(T1) ;TEST PARITY BIT FOR THIS CHARACTER
JRST TCOU6 ;NO PARITY NEEDED. GO ON
TDXCT D,VOPAR ;DO PARITY LOGIC ;TCOUT - ADD PARITY TO CHARACTER
JRST TCOU6 ;GO STORE IN OUTPUT BUFFER
;PHYSICAL LINE. APPLY PARITY
TCOUT: SKIPL CHITAB(1) ;TEST PARITY BIT FOR THIS CHAR
JRST TCOU1 ;NO PARITY NEEDED. GO ON
TDXCT D,VOPAR ;DO PARITY LOGIC ;TCOUT - ADD PARITY TO CHARACTER
;FULLY ACTIVE LINE. PROCESS LINES LINKED TO THIS ONE
TCOU1: MOVE C,TTLINK(B) ;ANY LINKS?
CAME C,[-1]
CALL TTLNK3 ;YES. GO DO THEM
;SEE IF THERE IS ROOM IN THE OUTPUT BUFFER
TCOU3: JN TOFLG,(T2),R ;LOSE CHARACTER IF CTRL/O TYPED
DYNST T3 ;GET INTERNAL LINE NUMBER
CAMN T3,CTYINT ;IS THIS AN ALIAS FOR THE CTY?
RET ;YES. IGNORE CHARATCER
TCOU6: LOAD 3,TOMAX,(2) ;CAPACITY OF OUTPUT BUFFERS
SKIPE IMECHF ;IMMEDIATE ECHO CHARACTER?
ADDI 3,2 ;YES. EXTRA ROOM FOR THIS CHARACTER
CAMLE 3,TTOCT(2) ;FULL?
JRST TCOU5 ;NO
;ACTION WHEN BUFFER FULL
SKIPN INSKED ;ARE WE IN THE SCHEDULER?
SKIPE NSKED ;NO. ARE WE NOSKED?
JRST [ SETOM TCOERR ;YES. INDICATE FAILURE FOR SCHEDULER
RET] ; AND RETURN
CALL CHKPTA ;CHECK FOR PTY ACTION NEEDED
SETONE TTBKO,(T2) ;NOTE BLOCKE FOR OUTPUT EVENT
PUSH P,1 ;SAVE CHARACTER
DYNST T1 ;GET LINE NUMBER
PUSH P,T1 ;SAVE LINE #
CALL ULKTTY ;UNLOCK THE TTY
MOVEI 1,TCOTST ;SETUP SCHEDULER TEST WORD
HRL 1,0(P) ; LINE NO,,TEST ROUTINE ADR
MOVSI T2,FHV5 ;WAIT PRIORITY
HDISMS
MOVE T2,0(P) ;GET STATIC LINE NUMBER
CALL LCKTTY ;LOCK UP THE TTY
JUMPLE T2,[ MOVE T2,0(P) ;GET BACK LINE NUMBER
CALL TCOU7 ;GET SPECIAL BLOCK
JRST .+1]
ADJSP P,-1 ;CLEAN UP STACK
POP P,T1 ;CHARACTER
JRST TCOU3
;BUFFER IS NOT FULL. SEE IF THERE IS A BUFFER. IF NOT, GET AS MANY
;AS ARE NEEDED
TCOU5: LOAD T3,TLTYP,(T2) ;GET LINE TYPE
CAMN T3,TTLINV+TT.PTY ;PTY?
JRST [ PUSH P,2 ;YES. SAVE ADDRESS OF DYNAMIC DATA
DYNST ;GET LINE NUMBER
CALL PTYSKO ;IS IT OPEN?
JRST PB2 ;NO. LOSE OUTPUT
POP P,T2 ;YES. RESTORE ADDRESS OF DYNAMIC DATA
JRST .+1]
NOSKD1
CHNOFF DLSCHN ;MUST PREVENT DEASSIGN OF BUFFERS
SKIPE 3,TTOIN(2) ;BUFFERS EXIST?
JRST TCOU4 ;YES.
;THIS LINE HAS NO OUTPUT BUFFERS. GET SOME IF POSSIBLE. IF NONE
;AVAILABLE, WAIT FOR THEM UNLESS IN SCHEDULER. IN THAT CASE, SET
;ERROR FLAG AND RETURN
CHNON DLSCHN ;NO. ALLOW DLS INTERRUPTS
LOAD 3,TTNOU,(2) ;GET NUMBER TO ASSIGN
CALL TTGTBF ;ASSIGN THEM
JRST [ OKSKD1 ;FAILED. ALLOW SCHEDULING
SKIPN INSKED ;ARE WE IN THE SCHEDULER?
SKIPE NSKED ;NO. ARE WE NOSKED?
JRST [ SETOM TCOERR ;YES. INDICATE ERROR FOR SCHEDULER
RET] ; AND RETURN
PUSH P,1 ;SAVE CHARACTER
LOAD 1,TTNOU,(2);NO, CAN WAIT FOR BUFFERS
MOVSI 1,0(1) ;NUMBER NEEDED
HRRI 1,TTBUFW
MDISMS
POP P,1 ;RESTORE CHARACTER
JRST TCOU5] ;BUFFERS ARE AVAILABLE. GO GET THEM
CHNOFF DLSCHN
MOVEM 3,TTOOUT(2)
MOVEM 3,TTOIN(2)
;BUFFERS ARE AVAILABLE. AC 3 CONTAINS BYTE POINTER FOR ADDING NEXT
;CHARACTER. STORE THE CHARACTER.
TCOU4: TDNN 3,WRPMSK ;END OF BUFFER?
JRST [ HRRZ T4,T3 ;GET NEXT ONE
HRR T3,1-TTSIZ(T4)
MOVEM T3,TTOIN(T2) ;SAVE CHARACTER POINTER
JRST .+1]
IDPB T1,TTOIN(T2) ;GET CHARACTER
AOS 3,TTOCT(2) ;INCREMENT COUNT OF CHARACTERS IN BUFFER
CHNON DLSCHN ;SAFE TO TURN CHN ON AFTER AOS
AOS NTTYOT ;COUNT ALL OUTPUT
CALLRET STRTOU ;START OUTPUT TO LINE IF NEEDED
;HERE WHEN DID TCOTST BLOCK AND AWOKE TO FIND LINE
;HAS BEEN DEASSIGNED
SWAPCD ;GET HERE ONLY IN PROCESS CONTEXT
TCOU7: STKVAR <LNNUMB>
MOVEM T2,LNNUMB ;SAVE LINE NUMBER
TCOU75: NOSKED ;OWN THE MACHINE
TCOU76: MOVE T2,LNNUMB ;GET LINE #
CALL LCKTTY ;CHECK IT NOW
SKIPLE T2 ;IF UNASSIGNED, GO ON
JRST [ OKSKED ;ALLOW SCHEDULING
RET] ;AND DONE
MOVE T2,LNNUMB ;LINE # AGAIN
CALL ASGMSL ;GET A MESSAGE BLOCK
JRST TCOU77 ;FAILED
CALL STADYN ;SUCCESS. GET DYNAMIC DATA ADDRESS
JUMPLE T2,TCOU77 ;SOMETHING VERY WRONG. TRY AGAIN
SETOM TTLINK(T2) ;NO LINKS
JRST TCOU76 ;AND PROCEED
TCOU77: MOVEI T1,^D1000 ;WAIT 1 SEC
CALL SETBKT ;COMPUTE WAIT
HRRI T1,BLOCKT ;THE TEST
RDISMS ;WAIT HERE
JRST TCOU75 ;TRY AGAIN
RESCD ;BACK TO RESIDENT MONITOR
;TTLNK3 - SCAN LINK WORD, SENDING CHAR TO LINES SPECIFIED BY NON-777 BYTES
TTLNK3: SKIPE IMECHF ;ECHO CHARACTER?
JRST [ PUSH P,T2 ;SAVE DYNAMIC DATA ADDRESS
JRST TTLN33] ;AND PROCEED
DYNST T4 ;GET LINE NUMBER
PUSH P,T4 ;SAVE LINE NUMBER
CALL ULKTTY ;UNLOCK THE TTY
TTLN33: ;AOS LINKF ;BE SURE CHARS GO OUT
TTLNK2: SETZ 2,
LSHC 2,^D9 ;GET NEXT FIELD
CAIN 2,777
JRST TTLNK1 ;MEANS NOT IN USE
PUSH P,3
PUSH P,1 ;SAVE CHARACTER
CALL LCKTTY ;LOCK UP DESTINATION TTY
JRST TTLNK4 ;NOT ACTIVE. DON'T SEND TO IT
TRNN 1,200 ;THIS CHARACTER HAVE PARITY?
JRST TTLK11 ;NO. GO ON
TDXCT D,VOPAR ;DO PARITY LOGIC THEN ;TCOUT - ADD PARITY TO CHARACTER
TTLK11: CALL TCOU3 ;GO SEND EXACT CHARACTER
TTLNK4: CALL ULKTTY ;FREE UP THE TTY
POP P,1
POP P,3
TTLNK1: JUMPN 3,TTLNK2 ;DO MORE IF ANY
; SOS LINKF ;NO LONGER LINKING
SKIPE IMECHF ;DOING ECHOING?
JRST PB2 ;YES. CLEAN UP AND DONE
PUSH P,1 ;SAVE BYTE
MOVE T2,-1(P) ;GET BACK LINE NUMBER
CALL LCKTTY ;LOCK IT UP AGAIN
JUMPLE T2,[ MOVE T2,-1(P) ;GET LINE # AGAIN
CALL TCOU7 ;GET A SPECIAL BLOCK
JRST .+1] ;AND PROCEED
POP P,T1 ;GET BYTE
ADJSP P,-1 ;CLEAN UP STACK
RET ;AND PROCEED
;TCOTST - CALLED FROM SCHEDULER TO TEST FOR RUNNABLE
;ACCEPTS:
; T1/ INTERNAL LINE NUMBER
;CAUSES WAKEUP IF OUTPUT BUFFER IS NOT TOO FULL TO ADD A CHARACTER TO IT
TCOTST::MOVEI 2,0(1) ;LINE NUMBER TO REGULAR AC
CALL STADYN ;POINT TO DYNAMIC DATA
JRST 1(T4) ;NOT ACTIVE. SHOULDN'T HAPPEN
LOAD 1,TOWRN,(2) ;REGULAR WAKEUP COUNT
SKIPE FKINT(7) ;BUT IF INTERRUPT WAITING,
LOAD 1,TOMAX,(2) ;WAKEUP IF BUFFER IS NOT FULL
CAMG 1,TTOCT(2) ;AT WAKEUP LEVEL?
JRST 0(4) ;NO
SETZRO TTBKO,(T2) ;NOTE WAIT COMPLETED
JRST 1(4) ;YES
;TTBUFW - CALLED FROM SCHEDULER TO WAIT FOR BUFFERS
;ACCEPTS:
; T1/ NUMBER OF BUFFERS NEEDED
;CAUSES WAKEUP IF THE NEEDED NUMBER OF BUFFERS ARE AVAILABLE
TTBUFW: CAMLE 1,TTFREC
JRST 0(4)
JRST 1(4)
;STRTOU - START OUTPUT TO A LINE
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC BLOCK
; T3/ COUNT OF CHARACTERS IN OUTPUT BUFFER
; CALL STRTOU
; MUST BE NOSKD1!
;RETURNS +1: ALWAYS OKSKD1
STRTOU: SAVELN
TDJRST D,VSTOUT ;START OUTPUT TO LINE
;PHYSICAL LINE. START OUTPUT AT HARDWARE LEVEL IF NEEDED
STRTO1: JN TTOTP,(T2),STRT11 ;IF ACTIVE, NO NEED TO START IT
DYNST ;GET LINE NUMBER
IDIVI T2,^D36 ;COMPUTE BIT POSITION IN QUEUE
MOVE T3,BITS(T3)
IORM T3,TTSOQ(T2) ;REQUEST START NEXT BIGBUF CYCLE
STRT11: OKSKD1 ;ALLOW SHCEDULING NOW
RET
SUBTTL TCI (GET CHAR FROM INPUT BUFFER)
;ROUTINE TO GET CHARACTER FROM LINE INPUT BUFFER
;CONVERT FROM ASCII TO INTERNAL AND GENERATE ECHOS
;AS REQUESTED
;ACCEPTS IN T2/ LINE #
; CALL TCI
;RETURNS +1: NEEDED TO BLOCK, CALLER MUST VERIFY IF THE TTY BEING
; INPUT FROM IS STILL THE CORRECT ONE. IN
; PARTICULAR, WAS THE JOB DETACHED?
; +2: SUCCESSFUL, CHARACTER IN T1
;N.B. T2 MUST BE PRESERVED IN THIS ROUTINE
TCI::
TCI1: LOAD T3,TT%DAM,TTFLGS(T2) ;GET CURRENT DATA MODE
JUMPE T3,TCIB2 ;JUMP IF BINARY
LOAD T1,TYLCH,(T2) ;GET LAST CHARACTER TAKEN FROM INPUT BUFFER
OPSTR <SKIPE>,TTRFG,(T2) ;REPEAT LAST CHARACTER (BKJFN)?
JRST [ SETZRO TTRFG,(T2) ;YES. CLEAR FLAG
TXO T1,TTXECO ;INDICATE ALREADY ECHOED
JRST TCI3]
LOAD T3,TYLMD,(T2) ;[7167][1813] Get mode of last CHAR input
CAIN T1,.CHCRT ; Last Character a CR?
CAIN T3,.TTBIN ;[7167][1813] And input in NON-BINARY mode?
JRST [ CALL TCI0 ; No to either - Get next CHAR from buffer
RETBAD ; Needed to block. Tell the caller.
JRST TCI3] ; And continue
MOVE T1,[.CHLFD+TTXECO] ; Yes, Return LF with no echo
;NEXT CHARACTER IS IN RIGHT 9 BITS OF T1. IF IT HAS BEEN ECHOED,
;BIT TTXECO IS SET
TCI3: CALL TCITTI ;TEST FOR TERMINAL INTERRUPT AND HANDLE IT
RETBAD ;IT WAS, RETURN FAILURE
;NOT AN INTERRUPT CHARACTER. RAISE AND/OR ECHO AS NEEDED AND RETURN
;IT TO THE CALLER IN 7 BITS.
MOVE T4,T1 ;T4/ CHARACTER AND ECHO BIT
ANDI 1,177 ;T1/ CHARACTER IN 7 BITS
MOVE 3,TTFLGS(2) ;T3/ TTFLGS FOR THIS LINE
CAIN T1,.CHCRT ;A CR?
JRST [ CALL TCIECO ;YES, ECHO CR-LF
MOVEI T1,.CHLFD
CALL TCIECO
MOVEI T1,.CHCRT ;RETURN CR THIS TIME
JRST TCIR]
CALL TTRAIS ;TRANSLATE, RAISE, ETC.
CALL TCIECO ;ECHO CHARACTER IF NECESSARY
;[7167]ALL ECHOING, ETC., HAS BEEN DONE. STORE IN DYNAMIC DATA AND
;[7167]RETURN THE CHARACTER TO THE CALLER
TCIR: STOR T1,TYLCH,(T2) ;[7167]SAVE LAST CHAR
LOAD T3,TT%DAM,TTFLGS(T2) ;[7167]GET CURRENT DATA MODE
STOR T3,TYLMD,(T2) ;[7167] AND STORE AS DATA MODE FOR LAST CHAR INPUT
RETSKP ;[7167]SKIP TO INDICATE BUFFER WASN'T EMPTY
;TCIB - ENTRY FOR BINARY INPUT
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL TCIB
;RETURNS +1: NEEDED TO BLOCK
; +2: SUCCESS
; T1/ CHARACTER
TCIB::
TCIB2: OPSTR <SKIPE>,TTRFG,(T2) ;REPEAT LAST CHARACTER?
JRST [ SETZRO TTRFG,(T2) ;YES. CLEAR FLAG
LOAD T1,TYLCH,(T2) ;GET LAST CHARACTER INPUT
JRST TCIB1]
MOVEI T3,.TTBIN ;USE BINARY TERINAL DATA MODE
CALL TCI0 ;GET A CHAR
RETBAD ;NEEDED TO BLOCK. RETURN TO CALLER.
CALL TCITTI ;CHECK FOR TERMINAL INTERRUPT
RETBAD ;IT WAS, RETURN FAILURE
TCIB1: ANDI T1,377 ;RETURN CHARACTER + PARITY
MOVE T3,T1 ;[7167]SAVE A COPY OF LAST CHAR
ANDI T3,177 ;[7167]REMOVE PARITY FOR LATER TYLCH COMPARISONS
STOR T3,TYLCH,(T2) ;[7167]SAVE LAST CHARACTER
MOVEI T3,.TTBIN ;[7167]GET CURRENT DATA MODE (BINARY)
STOR T3,TYLMD,(T2) ;[7167]AND STORE AS DATA MODE FOR LAST CHAR INP
RETSKP ;[7167]SKIP TO INDICATE BUFFER WASN'T EMPTY
;TCIECO -DO DEFERRED ECHO IF NECESSARY
;ACCEPTS:
; T1/ CHARACTER IN 7 BITS
; T2/ ADDRESS OF DYNAMIC DATA
; T3/ TTFLGS FOR THIS LINE
; T4/ CHARACTER IN 9 BITS
TCIECO: TXNE T3,TT%ECO ;ECHOS ON?
TRNE T4,TTXECO ;AND CHARACTER NEEDS ECHO?
RET ;NO, DO NOTHING
PUSH P,T3 ;SAVE 3 FOR CALLER
PUSH P,T4 ;SAVE 4 FOR CALLER
SETZRO TOFLG,(T2) ;INPUT REQUEST MEANS IMPLICIT CLEAR OF CTRL/O
CALL TCOE ;SEND IT
POP P,T4
POP P,T3
RET
;TTCLPS - ROUTINE TO CLEAR PAGE COUNTER ON ENABLED INTERRUPT CHARACTER
;IF LINE IS IN PAGE MODE
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTCLPS
;RETURNS +1: ALWAYS,
; ALL AC'S PRESERVED
TTCLPS: JE TTNXO,(T2),R ;IF NO PAGE STOP, DONE
SETZRO TPGPS,(B) ;YES. CLEAR PAGE POSITION
RET ;AND RETURN
;TCI..
;TEST FOR DEFERRED TERMINAL INTERRUPT CHARACTER. INITIATE
;INTERRUPT IF NECESSARY.
; T1/ CHARACTER
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TCITTI
; RETURN +1: INTERRUPT CHAR, INTERRUPT INITIATED
; RETURN +2: NON-INTERRUPT CHAR, T1 PRESERVED
TCITTI: SAVEAC <Q1> ;[2607] SAVE AN AC
MOVEM T1,Q1 ;SAVE CHAR
ANDI T1,177 ;EXTRACT ASCII
CALL GPSICD ;GET PSI CODE IF ANY
JUMPL T1,TCITT1 ;JUMP IF NONE
MOVE T3,BITS(T1)
TDNN T3,TTPSI(T2) ;THIS CODE ENABLED?
JRST TCITT1 ;NO
;THIS IS A DEFERRED INTERRUPT CHARACTER. INITIATE THE INTERRUPT
;AND WAIT UNTIL IT HAS TAKEN
CALL TTCLPS ;YES. CLEAR OUT PAGE MODE STUFF
MOVEM T2,Q1 ;SAVE ADDRESS OF DYNAMIC DATA
MOVE T3,T1 ;PASS CODE IN T3 FOR TTPSRQ
NOSKED
CALL ULKTTY ;ALLOW DEALLOCATION
DYNST ;T2/ INTERNA LINE NUMBER
CALL TTPSRQ ;INITIATE INTERRUPT. RETURNS FORK ID IN 2
OKSKED
AOS TTINTS ;COUNT INTERRUPTS
MOVEI T1,TCIPIT ;SETUP SCHED TEST FOR INTERRUPT PROCESSED
HRL T1,T2 ;GET FORK THAT GOT THE INTERRUPT
SKIPE FKINT(T2) ;INTERRUPT STILL PENDING?
MDISMS ;YES, WAIT A WHILE
MOVE T2,Q1 ;RESTORE ADDRESS OF DYNAMIC DATA
RET ;RETURN NOSKIP TO RELOCK DATA
;NOT AN INTERRUPT CHARACTER. GIVE SKIP RETURN
TCITT1: MOVE T1,Q1 ;RESTORE INPUT CHAR
RETSKP ;RETURN TO CONTINUE PROCESSING CHAR
;TCIPIT - SCHEDULER TEST FOR MDISMS. CAUSES WAKEUP IF THE
;PROCESS POINTED TO BY AC 1 HAS NO PENDING INTERRUPTS
;ACCEPTS:
; T1/ FORK HANDLE
TCIPIT: SKIPE FKINT(T1) ;SCHED TEST FOR INTERRUPT STILL PENDING
JRST 0(T4) ;STILL PENDING
JRST 1(T4) ;COMPLETED
;TCI..
;TCI0 - GET ONE CHARACTER FROM LINE INPUT BUFFER
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; T3/ TERMINAL DATA MODE IN BITS 34-35
;RETURNS +1: LINE BUFFER WAS EMPTY, HAD TO WAIT
; +2: LINE BUFFER WAS NOT EMPTY,
; T1/ CHARACTER IN 9 BITS
;CALLER MUST HAVE CALLED LCKTTY ON THE LINE. IF BLOCK ON INPUT
;WAIT OCCURS, THIS ROUTINE CALLS ULKTTY
TCI0: NOSKED
SKIPG 1,TTICT(2) ;ANY CHARS IN BUFFER?
JRST TCI01 ;NO
SAVELN ;SAVE ADDRESS OF DYNAMIC DATA
SKIPN 3,TTIOUT(2) ;GET POINTER
BUG(TTICN0)
HRRZ 4,3
TDNN 3,WRPMSK ;AT END OF CURRENT BUFFER?
HRR 3,1-TTSIZ(4) ;YES. GO TO NEXT IN CHAIN
ILDB 1,3 ;GET NEXT CHARACTER
MOVEM 3,TTIOUT(2) ;SAVE UPDATED BYTE POINTER
SOSG TTICT(2) ;REDUCE COUNT, NOW EMPTY?
JRST [ SETZB 3,TTIOUT(2) ;YES, RELEASE BUFFERS
EXCH 3,TTIIN(2)
CALL TTRLBF
JRST .+1]
OKSKED
DYNST ;GET ORIGINAL LINE NUMBER
CALL SNDXON ;SEND XON IF NEEDED
RETSKP ;SKIP TO INDICATE NO WAIT
;ACTION IF BUFFER IS EMPTY. MAKE SURE NO OTHER FORK IS WAITING.
;THEN GO INTO INPUT WAIT
TCI01: OKSKED
TCI11: LOAD T1,TWFRK,(T2) ;GET FORK WAITING FOR THIS LINE
CAIE T1,-1 ;IS THERE ONE?
JRST TCIF1 ;YES. GO RESOLVE THE CONFLICT
;..
;TCI..
;NO OTHER FORK IS WAITING. GO INTO INPUT WAIT ON THIS LINE
;NOTE: THE TEST ON TTLCK IS A BIG HACK TO KEEP FSIINI HAPPY.
;DON'T TRY TO MAKE USE OF IT FOR ANYTHING ELSE!!
;ALL CALLERS OF TCI SHOULD HAVE CALLED LCKTTY
;..
TCIF2: STOR T3,TYLMD,(T2) ;[1813][2807] SAVE DATA MODE THIS INPUT
PUSH P,3 ;SAVE DATA MODE
MOVE T3,FORKX ;GET INDEX OF THIS FORK
STOR T3,TWFRK,(T2) ;RECORD THIS FORK WAITING FOR TTY
SETZRO TTFWK,(T2) ;INDICATE NO FORCED WAKEUP
TDCALL D,VHNGRY ;INPUT GA
SETZRO TTWFG,(T2) ;CLEAR WAIT RESTARTED FLAG
PUSH P,T2 ;SAVE ADDRESS OF DYNAMIC DATA
DYNST ;GET LINE NUMBER
HRL T1,T2 ;SAVE LINE NUMBER
POP P,T2 ;RESTORE ADDRESS OF DYNAMIC DATA
; OPSTR <SKIPE>,TTLCK,(T2) ;DON'T UNLOCK IF IT'S NOT LOCKED
CALL ULKTTY ;ALLOW DEALLOCATION
HRRI 1,TCITST ;T1/(LINE NUMBER,,ROUTINE)
PUSH P,T2
MOVSI T2,FHV4 ;WAIT PRIORITY - BETTER THAN AVERAGE
HDISMS
POP P,T2
POP P,3 ;RESTORE CURRENT MODE
RET ;GIVE NON-SKIP RETURN TO SAY A BLOCK
; OCCURRED
;A FORK IS WAITING FOR INPUT ON THIS TERMINAL. IF IT IS THE CURRENT
;FORK, PROCEED AS USUAL. IF NOT, RESOLVE THE CONFLICT BY HALTING THE
;OTHER FORK IF IT IS INFERIOR TO THIS ONE OR WAITING FOR THE OTHER
;FORK IF IT IS SUPERIOR TO THIS ONE OR IN ANOTHER JOB
TCIF1: ANDI A,7777
CAMN A,FORKX ;IS IT THIS FORK?
JRST TCIF2 ;YES. GO TO IT THEN
CALL ULKTTY ;RELEASE TTY LOCK AND GO OKINT
CALLRET TTFRKT ;GO RESOLVE CONFLICT BY HALTING FORK
SUBTTL MISCELLANEOUS ROUTINES
;FORCE WAKEUP OF FORK NOW WAITING FOR SPECIFIED TTY LINE
; 2/ ADDRESS OF DYNAMIC DATA
TTFWAK::PUSH P,FX
LOAD FX,TWFRK,(2) ;GET INDEX OF FORK IN INPUT WAIT
CAIN FX,-1 ;IS A FORK WAITING?
JRST TTFW1 ;NO
ANDI FX,7777 ;YES, FLUSH FLAGS
SETONE TWFRK,(T2) ;INDICATE NO FORK WAITING
SETZRO TTFWK,(T2) ;DON'T FORCE WAKEUP ON THIS FORK
; UNTIL INPUT BUFFER FULL AGAIN
CALL TTUBLK ;UNBLOCK THE FORK
TTFW1: POP P,FX
RET
;UNBLOCK TTY INPUT FORK ONLY IF STILL WAITING FOR TTY INPUT
; FX/ FORK INDEX
; CALL TTUBLK
; RETURN +1: ALWAYS, FORK UNBLOCKED IF IN TCITST
TTUBLK: SAVELN
MOVE 1,FX ;SETUP ARG
CALLRET UNBLKF ;TELL SCHED TO UNBLOCK THE FORK
;SCHEDULER TEST ROUTINE FOR FORKS WAITING FOR TTY INPUT
;CALLED WITH JSP 4,
;AC 1 CONTAINS LINE NUMBER
;AC 7 CONTAINS FORK NUMBER OF FORK BEING TESTED
TCITST::MOVE T2,T1 ;GET LINE NUMBER
CALL STADYN ;POINT TO DYNAMIC DATA
JRST 1(4) ;LINE ISN'T ACTIVE. WAKE UP THE PROCESS
LOAD T1,TWFRK,(T2) ;GET INDEX OF FORK IN INPUT WAIT
CAIN T1,-1 ;IF NONE, WAKEUP
JRST 1(T4)
JN <TTFWK,TTWFG>,(T2),1(T4) ;IF FORCED WAKEUP SET, WAKE THE PROCESS
;WAKEUP IF WE'VE BEEN HERE BEFORE
SKIPE TTICT(T2) ;WAKEUP IF BUFFER ISN'T EMPTY
TCITS1: JRST 1(T4) ;WAKE THE PROCESS
SETONE TTWFG,(T2) ;INDICATE WE'VE BEEN HERE WITHOUT WAKING
JRST 0(T4) ;DON'T WAKE NOW
;SPECIAL CODE FOR TTY SIMULATORS. THIS ROUTINE PERFORMS THE PROPER
;TESTS FOR THE SPECIAL SIMULATOR. TO USE IT, PUT ITS ADDRESS
;IN THE VHNGRY OFFSET OF THE PROPER DEVICE AND PATCH IN THE ;INPUT GA
;PROPER LINE NUMBERS
TTCTRA: MOVEI T1,"A"-100 ;OUTPUT CHAR IS CONTROL-A
DYNST (T3) ;GET STATIC DATA IS T3
CAIL T3,.-.
CAILE T3,.-. ;WITHIN RANGE?
RET ;NO. DON'T SEND ^A THEN
CALLRET TCOUT ;YES. SEND CHARACTER
;'RAISE' INPUT
;ACCEPTS:
; T1/ THE CHARACTER IN 7 BITS
; T3/ TTFLGS FOR THE LINE
TTRAIS: TXNE T3,TT%LIC ;IF NOT RAISING INPUT
CAIGE T1,"A"+40 ; OR NOT IN RANGE
RET ;RETURN UNCHANGED
CAIG T1,"Z"+40 ;IF LOWER CASE ALPHABETIC
TRZ T1,40 ; CONVERT TO UPPER CASE ALPHABETIC
CAIE T1,.CHALT ;CONVERT OLD ASCII ALTMODE
CAIN T1,.CHAL2 ; AND ALTERNATE FORM
MOVEI T1,.CHESC ; TO THE ESC CODE
RET
;GPSICD - GET PSI CODE FOR CHARACTER
; 1/ CHARACTER
; CALL GPSICD
; RETURN +1 ALWAYS, 1/ PSI CODE OR -1 IF NOT A POSSIBLE PSI CHAR
GPSICD::CAIG 1," " ;WITHIN NON-PSI CHAR RANGE?
JRST GPSIC1 ;NO
CAIL 1,175
JRST GPSIC3 ;NO
GPSIC2: SETO 1, ;YES, RETURN -1
RET
GPSIC1: CAIN 1," " ;SPACE?
SKIPA T1,[^D29] ;YES, RETURN CODE
CAIG 1,33 ;CONTROL CHAR OR ESC?
RET ;YES, CODE EQUAL CHARACTER
JRST GPSIC2 ;NOT A PSI CHAR
GPSIC3: CAIN 1,177 ;RUBOUT?
SKIPA T1,[^D28] ;YES, RETURN CODE
MOVEI 1,^D27 ;NO, IS OLD ALT-MODE
RET
;ROUTINES TO X-OFF AND X-ON TERMINALS WHICH ARE OVERLOADING THE
;SYSTEM.
;SNDXOF - SEND XOFF TO STOP INPUT
;ACCEPTS:
; B/ LINE NUMBER
;RETURNS +1 ALWAYS WITH ALL REGISTERS PRESERVED
SNDXOF:
SAVET
TDJRST S,VSXOFF ;SEND XOFF TO TERMINAL
;SNDXON - RESUME INPUT FROM TERMINAL
;T2/ INTERNAL LINE NUMBER
;RETURNS +1: ALWAYS
SNDXON:
SAVEAC <A> ;SAVE VULNERABLE REGISTER
TDJRST S,VSXON ;SEND XON TO TERMINAL
SUBTTL TTCH7 (EMPTY TTBBUF, PROCESS TTCS WORDS)
;TELETYPE INPUT CHANNEL 7 ROUTINE
;RUN EVERY SO OFTEN TO MOVE CHARACTERS FROM BIG BUFFER TO LINE BUFFERS,
;GENERATE ECHOS AND HANDLE CARRIER TRANSITIONS
;ENTERED BY CALL FROM SCHED
;CALLED IN SCHEDULER CONTEXT
TTCH7:: SKIPG TTBIGC ;BIG BUFFER EMPTY?
JRST TTCH7X ;YES, RETURN
AOS 3,TTBIGO ;NO. INCREMENT POINTER TO LOAD FROM
CAIN 3,TTBSIZ ;AT END OF TTBBUF?
SETZB 3,TTBIGO ;YES. POINT TO START OF TTBBUF
MOVE 1,TTBBUF(3) ;GET NEXT ENTRY
SOS TTBIGC ;DECREMENT COUNT OF ENTRIES
HLRZ 2,1 ;GET LINE NUMBER
MOVEI 6,0(1) ;SAVE ALL ORIGINAL FLAGS
TDCALL S,VGCHBB ;REMOVE CHARACTER FROM TTBBUF
JRST [ DECR TTFBB,(B) ;NO. DECREMENT LINE'S COUNT OF TTBBUF ENTRIES
CALL SNDXON ;SEND XON IF NEEDED
JRST .+1]
TRNE T1,TTPIRQ ;NON CONTROLLING TERMINAL PSI?
JRST [ CALL STADYN ;CONVERT TO DYNAMIC DATA POINTER
JRST TTCH7 ;NONE
LOAD T1,TTOPSI,(B) ;GET PSI
LOAD T2,TTPSFK,(T2) ;GET FORK
CAIE T2,-1
CALL PSIRQ ;IF FORK SETUP, REQUEST INTERRUPT
JRST TTCH7] ;AND TRY NEXT
TRNE 1,TTOIRQ ;OUTPUT INTERRUPT REQUEST?
JRST [ MOVX 3,.TICTO ;YES. OUTPUT BUFFER WENT EMPTY AND PROCESS
CALL TTPSRQ ; ENABLED FOR INTERRUPT. ISSUE IT
JRST TTCH7] ;DONE WITH WORD
TRNE 1,DLSCXF ;CARRIER TRANSITION?
JRST TT7CX ;YES
TRNN 1,DLSRCF ;RECEIVER?
JRST TTCH7 ;NO (SHOULD NOT HAPPEN) - RESUME SCAN
;A CHARACTER WAS FOUND. SAVE IT IN 8 BITS AND GO STORE IN BUFFER.
;THEN GO GET NEXT WORD FROM TTBBUF
ANDI 1,377 ;GET 7 BITS OF CHARACTER + PARITY
CALL TTCHI ;PUT CHAR IN LINE BFR
NOP ;IGNORE FAILURE
JRST TTCH7 ;DO NEXT
;TTCH7..
;TTBBUF IS EMPTY. DO DEVICE DEPENDENT FUNCTIONS IF NEEDED
TTCH7X: CALL TTYQOC ;START OUTPUT ON QUEUED LINES
SKIPGE TTQCNT ;HAVE SOME SCANNING TO DO?
RET ;NO. ALL DONE THEN
;..
;TTCH7..
;BEFORE LEAVING, CHECK 8 LINES TO SEE IF THEY NEED ANYTHING DONE.
;DYNAMIC DATA CONTAINS ADDRESS OF ROUTINE TO CALL AND TIME TO CALL IT
;IF SOMETHING IS TO BE DONE FOR THE LINE
;..
TTHNG4:
MOVE 2,TTCQLN ;GET NEXT LINE TO BE CHECKED
MOVEI 4,10 ;LIMIT OF 10 LINES FOR THIS PASS
TTCQ3: SKIPGE TTQCNT ;ALL DONE?
JRST TTCQ5 ;YES, GO SAVE LINE NUMBER AND RETURN
CALL DOLINE ;GO PROCESS TTCS WORD AND/OR RELEASE BLOCK
;GO TO NEXT LINE. IF THE LINE TYPE CHANGES, DON'T PROCEED WITH THE NEW
;LINE. INSTEAD, GO TO THE NEXT LINE TYPE AFTER THE ONE JUST PROCESSED.
;THIS CODE ASSUMES THAT ALL LINES OF A GIVEN TYPE ARE NUMBERED CONSECUTIVELY.
TTCQ2: LOAD C,TTSTY,(B) ;NO. GET CURRENT TYPE
ADDI B,1 ;GO TO NEXT LINE
CAIL B,NLINES ;VALID LINE NUMBER?
JRST TTCQ6 ;NO. GO TO NEXT LINE TYPE
LOAD A,TTSTY,(B) ;GET TYPE OF NEXT LINE
CAMN C,A ;NEW TYPE?
JRST TTCQ1 ;NO. GO ON
REPEAT 0,< ;DON'T DO THIS
;TRANSFER ACCORDING TO THE VECTOR IN A. CERTAIN TYPES ARE NEVER
;PROCESSED.
MOVE A,TTLINV(C) ;GET VECTOR
JRST @VTTCS(A) ;GO TO DEVICE DEPENDENT ROUTINE ;TTCH7 - PROCESS TTCS WORDS
> ;END OF REPEAT 0
;FINISHED THE CURRENT LINE TYPE OR THE CURRENT TYPE IS NOT TO BE PROCESSED
;GO TO THE NEXT TYPE AND SEE IF IT IS TO BE PROCESSED
TTCQ6: AOS C ;GO TO NEXT LINE TYPE
CAIL C,NLTYPS ;BEYOND END OF LEGAL TYPES?
SETZ C, ;YES. GO BACK TO BEGINNING
MOVE A,TTLINV(C) ;GET VECTOR
MOVE B,TT1LIN(A) ;GET FIRST LINE OF THIS TYPE
JUMPL B,TTCQ6 ;IF LINE GROUP IS NOT HERE, GO GET NEXT
REPEAT 0,< ;VTTCS DISBALED FOR NOW ;TTCH7 - PROCESS TTCS WORDS
;TRANSFER ACCORDING TO THE VECTOR IN A. CERTAIN TYPES ARE NEVER
;PROCESSED.
JRST @VTTCS(A) ;GO TO DEVICE DEPENDENT ROUTINE ;TTCH7 - PROCESS TTCS WORDS
> ;END OF REPEAT 0
;PROCESS THIS LINE UNLESS WE HAVE DONE ENOUGH FOR THIS PASS
TTCQ1: SOJG 4,TTCQ3 ;DONE ENOUGH FOR THIS TIME?
TTCQ5: MOVEM 2,TTCQLN ;YES, START AT THIS LINE NEXT TIME
RET
;TTCH7...
;DOLINE - PROCESS TTCS WORD FOR A LINE AND RELEASE BLOCK IF NECESSARY
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL DOLINE
;RETURNS +1: ALWAYS
;PRESERVES ALL AC'S
DOLINE: SAVET
OPSTR <SKIPE A,>,TTIME,(B) ;ANYTHING TO DO FOR THIS LINE?
CAML A,TODCLK ;YES. IS IT TIME TO DO IT?
JRST DOLIN1 ;NO. GO SEE ABOUT RELEASING BLOCK
LOAD A,TROUT,(B) ;YES. GET ADDRESS OF FUNCTION TO DO
SETZRO <TTIME,TROUT>,(B) ;INDICATE NOTHING TO BE DONE FOR THIS LINE
PUSH P,T2 ;SAVE STATIC LINE NUMBER
CALL 0(1) ;DO THE FUNCTION
POP P,T2 ;RESTORE STATIC LINE NUMBER
SOS TTQCNT ;ONE MORE DONE
;SEE IF LINE IS ACTIVE. IF IT HAS A SHORT OR MESSAGE BLOCK,
;AND IT IS FINISHED WITH THE BLOCK, RELEASE IT
DOLIN1: CALL STADYN ;POINT TO DYNAMIC DATA
SKIPG T2 ;NOT FULLY ACTIVE. ANY DYNAMIC DATA?
RET ;INACTIVE, BECOMING ACTIVE, OR FULL-LENGTH
JN <TTLCK,TTSAL>,(T2),R ;DON'T RELEASE IF DOING SENDALL OR LOCKED
JN TTSHT,(T2),DOLIN2 ;IF SHORT AND SENDALL DONE, RELEASE BLOCK
CALL TTSOBE ;IS OUTPUT COMPLETE?
RET ;NOT FINISHED WITH THE BLOCK YET
;HAVE A MESSAGE BLOCK. RELEASE THE BLOCK AND RELEASE THE ASSOCIATED
;OUTPUT BUFFERS (IF ANY)
SKIPE T3,TTOOUT(T2) ;RELEASE OUTPUT BUFFERS IF ANY
CALL TTRLBF ; ARE ASSIGNED
;READY TO RELEASE THE BLOCK. T2 HAS ITS ADDRESS
DOLIN2: MOVE T1,T2 ;T1/ ADDRESS OF BLOCK TO RELEASE
DYNST ;GET LINE NUMBER
SETZM TTACTL(T2) ;INDICATE NO DATA FOR THIS LINE
CALL RELRES ;RELEASE THE BLOCK
SOS TTQCNT ;ONE MORE DONE
RET
;TTCH7..
;TTQAD - ADD ITEM TO CONTROL QUEUE
;ACCEPTS:
; T1/ TIME UNTIL EVENT
; T2/ INTERNAL LINE NUMBER
; T3/ ROUTINE TO BE CALLED AT GIVEN TIME
; CALL TTQAD (TTQAD1 FOR DEFAULT TIME LIMIT)
;RETURNS +1: ALWAYS
TTQAD1: MOVEI T1,^D3000 ;ITEM TO BE DONE IN 3 SEC.
TTQAD: ADD T1,TODCLK ;COMPUTE ABSOLUTE TIME TO DO FUNCTION
STOR T1,TTIME,(T2) ;SAVE TIME FOR DOING THE FUNCTION
OPSTRM <EXCH T3,>,TROUT,(T2) ;SAVE ROUTINE TO DO IT
JUMPN T3,R ;IF ALREADY ON THE QUEUE, RETURN
AOSG TTQCNT ;FIRST ENTRY?
MOVEM T2,TTCQLN ;YES. START SCAN HERE THEN
RET
;ROUTINE CALLED ONCE A SECOND TO DO CONTROLLER DEPENDENT FUNCTIONS
TTYCHK::PUSH P,Q1 ;DO CHECKS FOR DEVICES
PUSH P,Q2
MOVEI Q1,NLTYPS ;CALL FOR ALL DEVICES
MOVEI T1,SCNTIM ;TIME FOR NEXT SCAN
MOVEM T1,TTYTIM
TTLILP: MOVE Q2,TTLINV-1(Q1)
CALL @VCKLIN(Q2) ;DO DEVICE DEPENDENT FUNCTIONS ;TTCH7 AFTER EMPTYING TTBBUF
SOJG Q1,TTLILP ;ALL DEVICES
POP P,Q2 ;RESTORE
POP P,Q1
RET ;AND DONE
;TTCH7..
;WORD IN TTBBUF INDICATED CARRIER TRANSITION (DLSCXF WAS SET).
;IF CARONB IS SET, CARRIER WENT ON. IF NOT, CARRIER WENT OFF
TT7CX: TRNN A,CARONB ;DID CARRIER JUST COME ON?
JRST TTCX1 ;NO, OFF
;CARRIER WENT ON. IF THE LINE IS IN USE OR A JOB IS BEING
;CREATED ON IT, DON'T GO CREATE ANOTHER JOB ON IT
SETONE TTCON,(B) ;SET CARRIER ON FOR THIS LINE
TDJRST S,VCON ;HANDLE CARRIER/ON
;TTCON1 - CREATE JOB AS RESULT OF CARRIER COMING ON
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL TTCON1
;RETURNS +1: ALWAYS
;CARRIER HAS COME ON FOR REAL. TREAT THIS LIKE A CTRL/C AND CREATE
;A JOB IF POSSIBLE
TTCON1:
MOVEM B,C ;SAVE LINE NUMBER
CALL STADYN ;SEE IF THE LINE IS INACTIVE
SKIPE B ;YES. CREATE JOB ON IT IF ALLOWED
RET ;ACTIVE OR BECOMING ACTIVE. IGNORE CARRIER-ON
MOVE B,C ;RESTORE LINE NUMBER
MOVE A,FACTSW ;SEE IF REMOTE LOGINS ALLOWED
TXNN A,SF%RMT ;...
JRST [ HRROI A,[ASCIZ /
?LOGGING IN ON DATASETS IS CURRENTLY DISALLOWED.
/]
CALL TTEMSS ;NO. SAY SO
RET] ;DONE
SETONE TTFSP,(B) ;SAY LINE NEEDS SPEED SET
CALL TTC7SK ;GO CREATE JOB
JFCL ;ONLY DOES RETSKP'S
RET
;TTCH7...
;CARRIER WENT OFF
TTCX1: JE TTCON,(B),TTCH7 ;IF CARRIER WASN'T ALREADY ON, IGNORE IT
SETZRO TTCON,(B) ;INDICATE CARRIER NO LONGER ON
TDJRST S,VCOFF ;HANDLE CARRIER/OFF
;TTCOF - ROUTINE TO SEE IF CARRIER IS STILL OFF. SCHEDULED (VIA TTQAD)
;TO BE CALLED FOR A LINE WHEN CARRIER GOES OFF ON THE LINE
;NOT USED FOR FRONT END LINES
;ACCEPTS:
; T2/ LINE NUMBER
;RETURNS +1: ALWAYS
; T2/ LINE NUMBER
TTCOF: JN TTCON,(B),R ;IF CARRIER IS BACK ON NOW, DON'T HANGUP
MOVE C,[TTHU0] ;QUEUE A HANGUP-REACTIVATE SEQUENCE
SETZ A, ;TO START IMMEDIATELY
CALL TTQAD
CALLRET NTYCOF
;NTYCOF - HANDLE CARRIER OFF
;ACCEPTS:
; 2/INTERNAL LINE NUMBER
; CALL NTYCOF
;RETURN +1: ALWAYS,
; T2/ LINE NUMBER
;CALLED WHEN CARRIER GOES OFF FOR ANY PHYSICAL LINE. FLUSHES OUTPUT,
;ISSUES AN INTERRUPT IF A PROCESS HAS ENABLED FOR CARRIER-OFF INTERRUPT,
;ISSUES A MONITOR-INTERNAL INTERRUPT THAT CAUSES THE TOP FORK
;TO GO TO JOBCOF IN MEXEC
;ALSO CALLED FOR A LINE ASSOCIATED WITH A PTY WHEN THE PTY IS CLOSED.
NTYCOF::CALL TTCOB1 ;FLUSH OUTPUT
CALL CHKCTT ;SEE IF THIS IS A CONTROLLING TERMINAL
RET ;NO. DON'T ISSUE INTERRUPT
MOVE B,C ;YES. B/ADDRESS OF DYNAMIC DATA
MOVEI C,.TICRF ;C/CODE FOR THIS CONDITION
MOVE A,BITS(C) ;GET THE BIT
PUSH P,B ;SAVE ADDRESS OF DYNAMIC DATA
TDNE A,TTPSI(B) ;IS THE CODE ENABLED?
CALL TTPSI2 ;YES. GIVE THE INTERRUPT
POP P,B ;RESTORE ADDRESS OF DYNAMIC DATA
DYNST ;GET BACK THE LINE NUMBER
CALLRET TTJBDT ;GO DETACH JOB
;TTJBDT - ROUTINE TO GENERATE AN INTERRUPT WHEN CARRIER GOES OFF
;ACCEPTS:
; T2/ LINE NUMBER
;RETURNS +1: ALWAYS
; T2/ LINE NUMBER
;ISSUES AN INTERRUPT TO THE TOP FORK IN THE JOB. CAUSES THE JOB TO
;BE DETACHED
TTJBDT:
CALL CHKCTT ;SEE IF THIS IS A CONTROLLING TERMINAL
RET ;NO. DON'T ISSUE INTERRUPT
REPEAT 0,< ;FOLLOWING CODE DOES NOT
;WORK BECAUSE IT CAUSES PAGE
;FAULTS IN SCHEDULER. NEED TO
;MOVE THIS ELSEWHERE SOME DAY
OPSTR <SKIPE>,TTAUT,(B) ;IS THIS AN AUTO SPEED LINE?
SETOM TTSPWD(B) ;YES. INIT SPEED
> ;END OF REPEAT 0
PUSH P,B ;SAVE LINE NUMBER
HRRZ B,JOBPT(A) ;GET TOP FORK INDEX
MOVSI 1,400000+PSICOB
IORM 1,FKINT(B) ;REQUEST CARRIER OFF ACTION
CALL PSIR4
POP P,B ;RESTORE LINE NUMBER
RET
;TTCH7..
;CHKCTT - CHECK TO SEE TERMINAL IS A CONTROLLING TERMINAL FOR A JOB
;ACCEPTS:
; T2/ LINE NUMBER
; CALL CHKCTT
;RETURNS +1: NOT A CONTROLLING TERMINAL
; T2/ LINE NUMBER
; +2: CONTROLLING TERMINAL,
; T1/ JOB NUMBER
; T2/ LINE NUMBER
; T3/ ADDRESS OF DYNAMIC DATA
CHKCTT: STKVAR <CHKCSV,CHKCJN>
MOVEM B,CHKCSV ;SAVE LINE NUMBER
CALL STADYN ;POINT TO DYNAMIC DATA
JRST CHKCT1 ;LINE NOT ACTIVE.
LOAD C,TCJOB,(B) ;GET OWNING JOB
CAIN C,-1 ;IS THERE ONE?
JRST CHKCT1 ;NONE.
MOVEM C,CHKCJN ;SAVE JOB NUMBER
HLRZ A,JOBPT(C) ;GET CONTROLLING TERMINAL FOR JOB
MOVE C,B ;C/ADDRESS OF DYNAMIC DATA
MOVE B,CHKCSV ;B/LINE NUMBER
CAMN A,B ;IS THIS THE CONTROLLING TERMINAL?
JRST [ MOVE B,CHKCSV
MOVE A,CHKCJN ;A/ JOB NUMBER
RETSKP] ;YES. SUCCESS RETURN
CHKCT1: MOVE B,CHKCSV ;NOT CONTROLLING TERMINAL. RESTORE LINE NUMBER
RET ;FAILURE RETURN
;TTCH7..
;TTHU0 - HANGUP-REACTIVATE SEQUENCE
;ACCEPTS:
; T2/ LINE NUMBER
; CALL TTHU0
;RETURNS +1: ALWAYS
;SCHEDULED BY TTCOF WHEN A LINE HAS LOST CARRIER. CAUSES HANGUP OF THE
;LINE FOLLOWED BY ACTIVATE
TTHU0:
TDJRST S,VHNGUP ;GO DO DEVICE DEPENDENT HANGUP ;HANGUP, REACTIVATE REMOTE LINE
SUBTTL TTCHI (MOVE CHAR FROM TTBBUF TO INPUT BUFFER)
;TTCHI - PROCESS CHARACTER AS INPUT
;ACCEPTS:
; T1/ CHARACTER IN 8 BITS
; T2/ INTERNAL LINE NUMBER
; CALL TTCHI
;RETURNS +1: ALWAYS
; T2/ LINE NUMBER
;CALLED BY TTCH7 WHEN A CHARACTER HAS BEEN FOUND IN TTBBUF
;INITIATES AN INTERRUPT IF NEEDED; ECHOES IF APPROPRIATE;
;WAKES UP WAITING PROCESS IF NEEDED; STORES CHARACTER IN LINE BUFFER
;CALLED FROM SCHEDULER CONTEXT AND PROCESS CONTEXT
;IF IN PROCESS CONTEXT, MUST BE NOSKED, SO THAT THE SETTING AND
;TESTING OF TCOERR IN TCOUT WILL BE CONSISTENT
TTCHI: CAIL 2,NLINES ;REASONABLE LINE?
RET ;NO
SAVELN ;SAVE THE LINE NUMBER
STKVAR <TTCHSV,TTCHFL> ;MUST COME AFTER SAVELN
MOVEM T2,TTCHSV ;SAVE LINE NUMBER
MOVEM T1,TTCHIC ;SAVE ORIGINAL CHARACTER
ANDI T1,377 ;USE 8 BITS FOR LOCAL COMPARES
CALL STADYN ;IS THIS A FULLY ACTIVE LINE?
JRST TTC7N ;NO. GO HANDLE THIS CASE SEPARATELY
JE TT%PGM,TTFLGS(T2),TTCHIF ;IF IGNORING XOFF/XON, JUMP OFF
;TERMINAL IS IN PAGE MODE. IF CHARACTER IS XON OR XOFF, DO IT.
CAIE 1,PGMONC+1B28
CAIN 1,PGMONC ;XON?
JRST [ CALL TTXON ;YES, DO IT
RETSKP]
CAIE 1,PGMOFC ;XOF?
CAIN 1,PGMOFC+1B28
SKIPA ;YES
JRST TTCHIF ;NO
SETONE TTSFG,(T2) ;YES. INDICATE CTRL/S TYPED
TDCALL D,VXOFF ;PROCESS XOFF FROM TERMINAL
RETSKP
TTCHIF: ANDI T1,177 ;USE 7 BITS FOR LOCAL COMPARES
JE TTPRM,(T2),TTCHI2 ;YES. PERMANENT BLOCK?
LOAD T3,TCJOB,(T2) ;YES. GET CONTROLLING JOB
CAIN T3,-1 ;IS THERE ONE?
JRST TTC7N ;NO
;LINE IS ACTIVE. IT MAY OR MAY NOT BE A CONTROLLING TERMINAL FOR
;A JOB. HOWEVER, THE JOB CANNOT DO AN ATI EXCEPT ON ITS CONTROLLING
;TERMINAL. THEREFORE, SEE IF THE JOB HAS DONE AN ATI FOR THE CHARACTER
TTCHI2: MOVE T3,T1 ;COPY CHAR
CALL GPSICD ;GET PSI CODE FOR CHAR
EXCH 1,3 ;1/CHARACTER; 3/CODE OR -1
JUMPL 3,TTCHI6 ;-1 MEANS NO CODE
MOVE 5,BITS(3) ;BIT FOR THIS CODE
TDNN 5,TTPSI(2) ;CODE ENABLED?
JRST TTCHI6 ;NO. PROCESS AS PART OF INPUT STREAM
;..
;TTCHI..
;HERE WHEN RECEIVED TERMINAL INTERRUPT CHARACTER.
;CHECK WHETHER DEFERRED OR IMMEDIATE, INITIATE INTERRUPT IF NECESSARY.
; 2/ADDRESS OF DYNAMIC DATA
; 3/THE CODE
; 5/ BIT FOR CONTROL CODE FOR THIS CHARACTER
;..
TDNN 5,TTDPSI(2) ;DEFERRED CHARACTER?
JRST TCHI1 ;NO, INTERRUPT IMMED
LDB 4,TTIIN(2) ;GET LAST INPUT CHAR
CAMN T4,TTCHIC ;LAST CHAR SAME AS THIS ONE?
JRST TTCHI5 ;YES, MAKE IMMEDIATE
;HANDLE DEFERRED INTERRUPT
PUSH P,1
CALL TTFWAK ;FORCE WAKEUP SO PGM CAN SEE INT
POP P,1
LOAD 3,TIMAX,(2) ;MUST PUT DEFERRED CHAR IN BUFFER
ADDI 3,1 ;1 RESERVED FOR INT CHAR
CAMG 3,TTICT(2) ;IS ROOM?
JRST [ DPB 1,TTIIN(2) ;NO, SMASH CHAR ON TOP OF LAST ONE
JRST TCHIX] ;RETURN
JRST TTCHI9 ;YES. PUT IN BUFFER W NO ECHOS
;DEFERRED CHARACTER TWICE IN A ROW
TTCHI5: PUSH P,3 ;SAVE CODE
CALL TTCIBF ;CLEAR INPUT BUFFER ON DOUBLE INT
POP P,3 ;RESTORE CODE
TCHI1: CALL TTPSI2 ;GO ISSUE THE INTERRUPT
TCHIX: RETSKP
;TTPSI2 - ISSUE INTERRUPT TO PROCESS THAT HAS ENABLED FOR IT
;VIA ATI
;ACCEPTS:
; T2/ADDRESS OF DYNAMIC DATA
; T3/CODE
; CALL TTPSI2
;RETURNS +1: ALWAYS
;NOTE: TTPSRQ CLOBBERS T2
TTPSI2: CALL TTCLPS ;CLEAR PAGE COUNTER
DYNST ;T2/ INTERNAL LINE NUMBER
CALL TTPSRQ ;REQUEST INTERRUPT FROM PSI SYSTEM
AOS TTINTS ;COUNT INTERRUPTS
RET ;AND DONE
;TTCHI..
;NOT AN INTERRUPT CHARACTER
;2/ ADDRESS OF DYNAMIC DATA
;..
TTCHI6: AOS NTTYIN ;COUNT INPUT
;TERMINAL NOT IN PAGE MODE OR THIS WAS NOT XON OR XOFF
;IF TERMINAL DATA MODE IS BINARY, GO STORE CHARACTER IN LINE BUFFER
;WITHOUT TRANSLATION OR ECHOING
TTCHI1: LOAD 3,TYLMD,(2) ;[1813][2807] CHECK MODE NOW IN FORCE
CAIE 3,.TTBIN ;BINARY?
JRST TTCHI4 ;NO.
LOAD 3,TIMAX,(2) ;YES. GET CAPACITY OF INPUT BUFFER
CAMLE 3,TTICT(2) ;ROOM FOR CHAR IN INPUT BUFFER?
JRST TTCHI9 ;YES. GO PUT IT IN
RET ;NO. LOSE CHARACTER
;SOME TRANSLATION (OUTPUT OR ECHOING OR BOTH) IS REQUIRED BY TERMINAL
;DATA MODE. SEE IF ECHOING IS REQUIRED
TTCHI4: JUMPE 1,RSKP ;FLUSH NULLS ASAP
LOAD 3,TIMAX,(2) ;CAPACITY OF INPUT BUFFERS
CAMG 3,TTICT(2) ;FULL?
JRST TTCH12 ;YES, ECHO BELL
MOVE 3,TTFLGS(2)
TRNE 3,TT%DUM ;REGULAR FDX LINE?
JRST TTCHI7 ;HDX - 'ECHO' IMMED
TRNN 3,TT%ECO ;ECHOS ON?
JRST TTCHI9 ;NO
TRNE 3,TT%ECM ;STANDARD ECHO MODE?
JRST TTCHI7 ;NO, IMMEDIATE ALWAYS
LOAD 4,TWFRK,(2) ;GET WAITING FORK IF ANY
CAIN 4,-1 ;IS THERE A WAITING FORK?
JRST TTCHI9 ;NO. DON'T ECHO NOW
;EITHER IMMEDIATE ECHOING IS REQUIRED OR DEFERRED IS REQUIRED AND
;A FORK IS IN INPUT WAIT ON THIS TERMINAL. ECHO THE CHARACTER NOW
;AND SET TTXECO WITH THE CHARACTER IN TTCHIC. THIS WILL BE STORED
;IN THE LINE BUFFER SO THAT TCI WILL NOT ECHO IT AGAIN
TTCHI7: SETZRO TOFLG,(T2) ;TURN OFF CTRL/O IF PRESENT
MOVE T3,TTFLGS(T2) ;GET FLAGS FOR TTRAIS
SETOM IMECHF ;FLAG ECHO CHARACTER FOR TCOUT
CAIE T1,.CHCRT ;[2926] CR?
JRST TTCH8A ;[2926] NO CHECK RAISES
SETZM TCOERR ;[2926] YES, INIT ERROR INDICATOR
CALL TCOE ;[2926] YES, ECHO CR-LF
LOAD T1,TTDUM,(T2) ;[2926] GET THE DUPLEX MODE
CAIE T1,.TTHDX ;[2926] HDX?
CAIN T1,.TTLDX ;[2926] ...
JRST [ SETONE TTFWK,(T2) ;[2926] MAYBE A APPLICATION BLOCK LINE (X29)
JRST .+1] ;[2926] SO WAKE IT
SKIPA T1,[.CHLFD] ;[2926] ECHO THE LINE FEED
TTCH8A: CALL TTRAIS ;[2926] RAISE FOR ECHO IF NECESSARY
TTCHI8: SETZM TCOERR ;INIT ERROR INDICATOR
SETZM TTCHFL ;INITIALIZE ECHO INDICATOR
CALL TCOE ;ECHO VIA NORMAL OUTPUT STREAM
SKIPE TCOERR ;DID TCOUT FAIL?
JRST [ SETZM IMECHF ;FAILED TO ECHO. RESET IMMEDIATE ECHO FLAG
SETOM TTCHFL ;INDICATE CHARACTER NOT ECHOED
JRST TTCHI9] ;GO STORE CHARACTER WITHOUT MARKING IT ECHOED
MOVEI T4,TTXECO ;CHARACTER WAS ECHOED. INDICATE IT
IORM T4,TTCHIC ; SO THAT TCI WON'T ECHO IT LATER
SETZM IMECHF ;RESET IMMEDIATE ECHO INDICATOR
; ..
;TTCHI..
;HERE IF THE CHARACTER IS NOT AN INTERRUPT CHARACTER, OR THE
;JOB HAS ENABLED ONLY FOR DEFERRED INTERRUPT ON THE CHARACTER
;IF ECHOING WAS REQUIRED, IT HAS BEEN DONE
;GET INPUT BUFFER IF NEEDED; PUT CHAR IN BUFFER
; 2/ ADDRESS OF DYNAMIC DATA
;..
TTCHI9: SKIPN 3,TTIIN(2) ;INPUT BUFFERS EXIST?
JRST [ LOAD 3,TTNIN,(2);NO, GET NUMBER TO ASSIGN
CALL TTGTBF ;ASSIGN THEM
JRST TTCH12 ;NO BUFFERS, DING
MOVEM 3,TTIOUT(2) ;SAVE BYTE POINTER FOR REMOVING CHARACTERS
JRST .+1]
HRRZ 4,3 ;AT END OF BUFFER?
TDNN 3,WRPMSK
HRR 3,1-TTSIZ(4) ;YES. POINT TO NEXT BUFFER IN CHAIN
MOVE T4,TTCHIC ;GET INPUT CHARACTER
IDPB T4,3 ;STORE IN INPUT LINE BUFFER
MOVEM 3,TTIIN(2) ;SAVE UPDATED POINTER FOR ADDING TO BUFFER
AOS 3,TTICT(2) ;INCREMENT COUNT OF CHARACTERS
;IF INPUT BUFFER IS FULL, SEND XOFF TO TERMINAL
LOAD D,TIMAX,(B) ;GET CAPACITY OF BUFFERS
PUSH P,B ;SAVE TTY
DYNST
CAIL C,-MINICT(D)
CALL SNDXOF ;XOFF
POP P,B ;RESTORE LINE
;IF THIS STORE MADE THE BUFFER GO NON-EMPTY, AND JOB HAS ENABLED FOR
;INTERRUPTS ON THAT CONDITION, ISSUE THE INTERRUPT
CAIN 3,1 ;JUST BECAME NON-0?
CALL TTCH22
;..
;TTCHI..
;IF A FORK IS IN INPUT WAIT ON THIS TERMINAL, WAKE IT UP IF EITHER
; 1. THE TERMINAL DATA MODE IS BINARY
; 2. THE INPUT BUFFER IS FULL
; 3. THE CHARACTER IS IN A WAKEUP CLASS SPECIFIED BY THE JOB
;..
LOAD 3,TWFRK,(2) ;IF NO FORK WAITING FOR THIS LINE,
CAIN 3,-1
JRST TTCH10 ; THEN SKIP WAKEUP CHECKS
LOAD 3,TYLMD,(2) ;[1813][2807] GET TERMINAL DATA MODE FOR LAST CHARACTER
CAIN 3,.TTBIN ;WAKE ALWAYS IF BINARY
JRST [ CALL TTFWAK ;WAKE LISTENING PROCESS
RETSKP] ;RETURN SUCCESS
LOAD 3,TIMAX,(2) ;CAPACITY OF INPUT BUFFERING
SUBI 3,MINCT1 ;LESS AN ARBITRARY AMOUNT
CAMG 3,TTICT(2) ;BUFFER NOW THAT FULL?
JRST [ SETONE TTFWK,(2) ;YES. FORCE WAKEUP OF WAITING FORK
JRST .+1]
CAIN T1,.CHCRT ;IS THIS A CARRIAGE RETURN
MOVEI T1,.CHLFD ;YES-FORCE IT TO BE ALINE FEED
SKIPL TTCHFL ;DID WE FAIL TO ECHO CHARACTER?
CALL TTWAKE ;DETERMINE IF CHARACTER IS IN WAKE-UP CLASS
JRST [ CALL TTFWAK ;YES, FORCE WAKEUP
JRST TTCH1X]
TTCH10: LOAD FX,TWFRK,(2) ;GET WAITING FORK IF ANY
CAIN FX,-1 ;IS THERE ONE?
JRST TTCH1X ;NO, DON'T WAKE
JE TTFWK,(2),TTCH1X ;YES. IS THE WAKEUP BIT SET?
ANDI FX,7777 ;YES, FLUSH FLAGS
CALL TTUBLK ;MAKE THE FORK RUN TO EMPTY BUFFER
TTCH1X: RETSKP
;INPUT BUFFER GETTING FULL. SEND BELL AND LOSE CHARACTER
TTCH12: PUSH P,T2 ;SAVE DYN ADDRESS
DYNST ;MAKE STATIC
TDCALL S,VSTPLN ;SHUT LINE OFF ;STOP LINE
POP P,T2 ;RESTORE T2
LOAD T3,TLTYP,(T2) ;CHECK LINE TYPE
CAMN T3,TTLINV+TT.PTY ;PTY?
RET ;YES
MOVEI T1,"G"-100 ;NO, ECHO BELL
CALLRET SCDTCO
;DO INPUT INTERRUPT IF ENABLED
TTCH22: LOAD T4,TTPSFK,(T2) ;CHECK FOR FORK
CAIN T4,-1
JRST TTCH23 ;IGNORE IF NOT SET
LOAD T4,TTIPSI,(T2) ;CHECK FOR NON CONTRL TERM PSI
CAIL T4,^D36 ;CHECKLEGAL
JRST TTCH23 ;NO TRY FOR CONTROL TERMINAL
SAVET ;SAVE TEMPS
MOVE T1,T4 ;GET PSI
LOAD T2,TTPSFK,(T2) ;GET FORK
CALLRET PSIRQ ;DO REQUEST
TTCH23: MOVX 4,1B<.TICTI>
TDNN 4,TTPSI(2) ;YES, SEE IF INPUT INTERRUPT WANTED
RET ;NO
MOVX 3,.TICTI ;YES, REQUEST IT
SAVET ;SAVE ACS
DYNST ;T2/ INTERNAL LINE NUMBER
CALLRET TTPSRQ ;REQUEST INTERRUPT
;NOTE: DOESN'T SET OR TEST TCOERR. IGNORES FAILURE TO SEND BELL
;TTCHI..
;RECEIVED CHARACTER ON LINE THAT IS NOT ASSIGNED A FULL-LENGTH
;DYNAMIC BLOCK.
; T1/ CHARACTER
; T2/-1 IF LINE IS BECOMING ASSIGNED
; OR
; 0 IF NOT AT ALL ASSIGNED
; OR
; POSITIVE ADDRESS OF SHORT OR TTEMES BLOCK
TTC7N: ANDI T1,177
CAIN T1,.CHNUL ;FLUSH NULLS
RET
MOVE T4,TTCHSV ;GET LINE NUMBER
JN TTIGI,(T4),R ;RETURN IF IGNORING CHARACTERS ON THIS LINE
CAIE T1,.CHCRT ;[7249] CR or ...
CAIN T1,.CHLFD ;[7249] ... LF?
JRST TTCH71 ;[7249] Yes, try to create job.
CAIN T1,.CHCNC ;CONTROL-C?
JRST TTCH71 ;YES.
JUMPL T2,R ;IF BECOMING ACTIVE, IGNORE
JUMPE T2,TTCH73 ;IF INACTIVE, SEND BELL
JE TTPRM,(T2),TTCH73 ;IF TEMPORARILY ACTIVE AND NOT PERMANENT, SEND BELL
JN TTBAC,(T2),R ;IF PERMANENT AND BECOMING ACTIVE, IGNORE
TTCH73: HRROI T1,[BYTE(7) .CHBEL] ;SEND A BELL
MOVE T2,TTCHSV ;T2/ INTERNAL LINE NUMBER
CALLRET TTEMES ;GO SEND A BELL AND LOSE CHARACTER
;A CONTROL/C WAS RECEIVED OR CARRIER CAME ON FOR A REMOTE LINE
;IF LINE IS TOTALLY INACTIVE, GO CREATE A JOB ON IT
;IF LINE IS BECOMING ACTIVE, IGNORE THE CHARACTER
;IF LINE HAS SHORT OR MESSAGE BLOCK, IGNORE THE CHARACTER
TTCH71: JUMPE T2,TTCH75 ;ACCEPT IF NOT AT ALL ACTIVE
JUMPL T2,R ;IGNORE IF BECOMING ACTIVE
JE TTPRM,(T2),R ;IF NOT PERMANENT, ASSUME BLOCK WILL GO AWAY
JN TTBAC,(T2),R ;PERMANENT. IGNORE IF BECOMING ACTIVE
;LINE HAS NO DYMAMIC DATA OR IT HAS A PERMANENT BLOCK AND 1) HAS NO
;CONTROLLING JOB AND 2) IS NOT BECOMING ACTIVE. CREATE A JOB ON IT IF
;LOGINS ARE ALLOWED
TTCH75: MOVE T1,FACTSW ;SEE WHAT LOGINS ARE ALLOWED
MOVE T2,TTCHSV ;RESTORE LINE NUMBER
TTC7SJ: CAMN 2,CTYLNO ;CTY?
JRST [ TXNE T1,SF%CTY ;YES, CTY LOGIN ALLOWED?
JRST TTC7SK ;YES, GO LOGIN
HRROI 1,[ASCIZ/
?LOGGING IN ON THE CTY IS CURRENTLY DISALLOWED.
/]
CALLRET TTEMSS] ;NO LOGIN ALLOWED ON CTY
TDJRST S,RNEWCC ;HANDLE CTRL/C FROM INACTIVE LINE
;LINE IS ON THE FRONT END OR THE DC10. SEE IF LINE IS LOCAL OR REMOTE
TTC7S1: JN TTFEM,(T2),TTCHS3 ;IF REMOTE, GO CHECK REMOTE LOGINS
TXNE T1,SF%LCL ;LOCAL LOGINS ALLOWED?
JRST TTC7SK ;YES. GO CREATE JOB
HRROI 1,[ASCIZ/
?LOGGING IN ON LOCAL TERMINALS IS CURRENTLY DISALLOWED.
/]
CALLRET TTEMSS ;LOCAL LOGINS NOT ALLOWED. SEND MESSAGE
;LINE IS REMOTE
TTCHS3: TXNE 1,SF%RMT ;...
JRST TTC7SK ;YES. GO CREATE JOB
SETONE TTFSP,(T2)
HRROI 1,[ASCIZ/
?LOGGING IN ON DATASETS IS CURRENTLY DISALLOWED.
/]
CALLRET TTEMSS ;REMOTE LOGINS NOT ALLOWED, SEND MESSAGE
;LOGINS ARE ALLOWED.
TTC7SK: MOVEI 1,JOBSRT ;REQUEST SCHEDULER- START JOB
HRLI 1,0(2) ;ON SPECIFIED TTY LINE
SKIPLE T3,TTACTL(T2)
JRST [ JE TTPRM,(T3),.+1
SETONE TTBAC,(T3)
JRST TTC7S3]
SETOM TTACTL(T2) ;INDICATE LINE BECOMING ACTIVE
TTC7S3: CALL SCDRQ7
RETSKP
; TTWAKE - DETERMINE IF CHARACTER IS IN WAKE-UP CLASS
;ACCEPTS:
; T1/ 7-BIT ASCII CHARATER
; T2/ ADDRESS OF DYNAMIC DATA
;RETUNS: +1, CHARACTER BELONGS TO A WAKE-UP CLASS
; +2, CHARACTER NOT IN ANY WAKE-UP CLASS
TTWAKE: LOAD T3,TTFCNT,(T2) ;DECREMENT FIELD WIDTH COUNT
JUMPLE T3,TTMASK ;JUMP IF FIELD WIDTH DISABLED (=0)
SOS T3 ;ENABLED - DECREMENT THE COUNT
STOR T3,TTFCNT,(T2) ;SAVE NEW VALUE
SKIPN T3 ;SKIP IF COUNT NOT EXHAUSTED
RET ;COUNT EXHAUSTED - WAKE PROCESS
;HERE TO CHECK WAKE-UP MASK (FIELD WIDTH DISABLED OR NOT EXHAUSTED)
TTMASK: MOVE T3,T1 ;MOVE THE ASCII CHARACTER
IDIVI T3,^D32 ;COMPUTES WHICH WORD MASK BIT IS IN
MOVE T4,BITS(T4) ;GET THE BIT MASK FOR TESTING
ADD T3,T2 ;BUMP INTO PROPER WORD OF MASK
TDNE T4,TTCHR1(T3) ;SKIP IF NO WAKE-UP ON THIS CHARACTER
RET ;PROCESS SHOULD BE AWAKENED
CAIE T1,.CHLFD ;IS THIS A LF ON A PTY?
RETSKP ;NO, NO WAKEUP
LOAD T3,TLTYP,(T2)
CAMN T3,TTLINV+TT.PTY ;PTY?
RET ;YES, WAKEUP
RETSKP ;PROCESS SHOULD NOT BE AWAKENED
SUBTTL TTEMES
;TTEMES - SEND SHORT MESSAGE FROM SCHEDULER
;ACCEPTS:
; T1/ BYTE POINTER TO STRING TO BE OUTPUT
; T2/ LINE NUMBER
; CALL TTEMES
;RETURNS +1: ALWAYS
;CALLED AT SCHEDULER LEVEL TO SEND A SHORT MESSAGE TO A LINE
;IF LINE IS ACTIVE, APPENDS CHARACTERS TO OUTPUT BUFFER. IF NOT
;ACTIVE, CREATES A MESSAGE-LENGTH DYNAMIC BLOCK FOR THE LINE
;TTEMSS - ENTRY POINT TO CLEAR OUTPUT BUFFER BEFORE OUTPUTTING
TTEMSS: PUSH P,A ;SAVE STRING POINTER
CALL TTCOB1 ;CLEAR CURRENT GARABGE OUT
POP P,A ;AND GO SEND THE MESSAGE
;TTEMES - NORMAL ENTRY POINT
TTEMES::SAVELN ;PRESERVE LINE NUMBER
STKVAR <TTEMBP,TTEMAC,TTEMLN>
MOVEM T1,TTEMBP ;SAVE BYTE POINTER TO STRING
MOVEM T2,TTEMLN ;SAVE LINE NUMBER
MOVEM 5,TTEMAC ;SAVE WORK REGISTER
CALL STADYN ;GET POINTER TO DYNAMIC DATA
SKIPA ;NOT FULLY ACTIVE
JRST TTEME2 ;FULLY ACTIVE. USE REGULAR BUFFERS
JUMPL T2,TTEME3 ;IF BECOMING ACTIVE, CAN'T SEND MESSAGE
JUMPE T2,TTEME1 ;IF INACTIVE, GO GET A BLOCK
JN TTSHT,(T2),TTEME3 ;IF SHORT BLOCK, CAN'T SEND MESSAGE
JRST TTEME2 ;HAS MESSAGE BLOCK. APPEND STRING
TTEME1: MOVE T2,TTEMLN ;T2/LINE NUMBER
CALL ASGMSG ;GET A BLOCK
JRST TTEME3 ;COULDN'T GET ONE
MOVE T2,T1 ;GET ADDRESS OF DYNAMIC DATA
;T2/ ADDRESS OF DYNAMIC DATA FOR FULL-LENGTH OR MESSAGE BLOCK
TTEME2:
MOVE T1,TTEMBP ;RESTORE BYTE POINTER
TLC 1,-1
TLCN 1,-1 ;LH = 777777 ?
HRLI 1,440700 ;YES, MAKE BYTE PTR
MOVEM T1,TTEMBP ;SAVE BYTE POINTER
TTEME4: ILDB 1,TTEMBP ;GET CHARACTER
JUMPE 1,TTEME3 ;NULL TERMINATES.
MOVEI 5,0(1) ;SAVE THE BYTE
CALL SCDTCO ;OUTPUT IT
CAIE 5,.CHCRT ;A CARRIAGE RETURN?
CAIN 5,.CHLFD ;OR A LF?
SKIPA ;GO FILL
JRST TTEME4 ;NO. GET NEXT CHARACTER
MOVEI 5,3 ;NUMBER OF FILLS TO DO
TTEME5: MOVEI A,TTFILL ;THE FILL CHARACTER
CALL SCDTCO ;OUTPUT IT
SOJGE 5,TTEME5 ;DO ALL FILLS
JRST TTEME4 ;GO DO NEXT BYTE
TTEME3: MOVE T1,TTEMBP ;RESTORE BYTE POINTER
MOVE 5,TTEMAC ;RESTORE WORK REGISTER
CALLRET TTYQOC ;GET OUTPUT STARTED
SUBTTL BIGSTO (STORE CHAR IN TTBBUF)
;BIGSTO - ROUTINE TO STORE DATA IN TTBBUF
;DATA CONSISTS OF STATUS BITS OR DLSRCF+CHARACTER IN 8 BITS
;CALLED AT INTERRUPT LEVEL OR WITH TELETYPE INTERRUPTS DISABLED
;SOMETIMES CALLED IN SCHEDULER CONTEXT
;ACCEPTS:
; T1/ (INTERNAL LINE NUMBER,,DATA)
; T2/ INTERNAL LINE NUMBER (MUST BE PHYSICAL LINE)
;RETURNS +1: ALWAYS
BIGSTO::TDJRST S,VSTOBB ;BIGSTO - STORE CHARACTER IN TTBBUF
;LINE IS ON THE RSX20F FRONT END. LIMIT ITS STORAGE IN TTBBUF
;LINE IS ON RSX20F OR DC10. STORE THE CHARACTER IN TTBBUF
BIGST1: MOVEI 3,TTBSIZ ;GET SIZE OF TTBBUF
CAMG 3,TTBIGC ;HAS TTBBUF OVERFLOWED?
JRST DLSSX1 ;YES
AOS 3,TTBIGI ;NO. POINT TO NEXT WORD IN TTBBUF
CAIN 3,TTBSIZ ;AT END OF TTBBUF?
SETZB 3,TTBIGI ;YES. WRAPAROUND
MOVEM 1,TTBBUF(3) ;STORE CURRENT DATA
AOS TTBIGC ;COUNT CONTENTS
RET
;TTBBUF HAS OVERFLOWED. THE CHARACTER WILL BE LOST.
DLSSX1: BUG(TTYBBO)
TDJRST S,VBBOV ;HANDLE OVERFLOW OF TTBBUF
DLSSX2: DECR TTFBB,(B) ;ON FRONT END. ONE LESS IN BIGBUF
JE TTFBB,(B),R ;IF NOW EMPTY, RETURN
CALLRET SNDXOF ;AND SEND HIM AN X-OFF AS WELL
;LOSE CHARACTER
SUBTTL TTSNDO (NON-INTERRUPT CHAR SEND)
;TTSND0 - SEND ROUTINE CALLABLE FROM NON-PI CONTEXT
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
; CALL TTSN10
;RETURNS +1: ALWAYS
;USE THIS ENTRY POINT IF ONLY LINE NUMBER IS AVAILABLE
TTSN10: NOSKD1
CALL STADYN ;POINT TO DYNAMIC DATA
JRST [ JUMPG T2,.+1 ;IF SEND-ALL OR MESSAGE,PROCEED
OKSKD1 ;NOT ACTIVE
RET]
JRST TTSN11
;TTSND0 - MAIN ENTRY POINT
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL TTSND0
; RETURNS +1: ALWAYS
;STARTS OUTPUT TO THE SPECIFIED LINE
TTSND0: NOSKD1
TTSN11: CHNOFF DLSCHN
CALL TTSND ;DO THE WORK
CHNON DLSCHN
OKSKD1
RET
;ROUTINE TO START OUTPUT ON QUEUED LINES
;CALLED ONLY ON SCHED SHORT CYCLE AT TTCH7X
TTYQOC: SAVEAC <Q1>
MOVSI Q1,-NTSQWD ;SETUP NUMBER OF WORDS TO CHECK
TTYQO1: SKIPE T1,TTSOQ(Q1) ;ANY QUEUED LINES IN THIS WORD?
TTYQO4: JFFO T1,TTYQO2 ;YES, FIND ONE
AOBJN Q1,TTYQO1 ;DO ALL WORDS
MOVE T1,PTYSTM ;CHECK PTY START TIME
CAMG T1,TODCLK ;UPDATE DUE?
ADDI T1,^D100 ;YES, BY .1 SEC
MOVEM T1,PTYSTM
RET
TTYQO2: MOVE T1,BITS(T2) ;CLEAR REQUEST THIS LINE
ANDCAM T1,TTSOQ(Q1)
HRRZ T3,Q1 ;COMPUTE LINE NUMBER
IMULI T3,^D36
ADD T2,T3
CALL STADYN ;GET DATA ADDRESS
JUMPLE T2,TTYQO1 ;QUIT IF NONE
LOAD T3,TLTYP,(T2) ;CHECK LINE TYPE
CAMN T3,TTLINV+TT.PTY ;PTY?
JRST TTYQO3 ;YES, CHECK IT
CHNOFF DLSCHN ;START OUTPUT
CALL TTSND
CHNON DLSCHN
JRST TTYQO1
TTYQO3: MOVE T3,TODCLK
CAMGE T3,PTYSTM ;TIME FOR START?
JRST [ IORM T1,TTSOQ(Q1) ;NO, KEEP REQUEST BIT
MOVN T1,T1
ANDCA T1,TTSOQ(Q1) ;BUT LOOK ONLY AT REMAINING BITS IN WORD
JRST TTYQO4]
CALL PTYCTM ;START OUTPUT
JRST TTYQO1
;CONSTANTS
WRPMSK: XWD 770000,TTSIZ-1 ;MASK FOR WRAPAROUND OF CHAR POINTER
SUBTTL TTSND (SEND CHAR TO LINE)
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
;CALLED AT INTERRUPT LEVEL
;OR IN SCHEDULER CONTEXT WITH TELETYPE INTERRUPTS DISABLED
;OR IN PROCESS CONTEXT WITH TELETYPE INTERRUPTS DISABLED
;SEND CHARACTER TO TTY LINE,
;FROM OUTPUT BUFFER IF NOT EMPTY; OTHERWISE
;CLEAR OUTPUT-ACTIVE FLAG
TTSND:
TTSND6: JE <TTSAL,TTSFG,TTSHT>,(T2),TTSND7 ;IS THIS LINE DOING A SENDALL?
OPSTR <SKIPLE>,TSALC,(T2) ;ANY MORE CHARACTERS TO SEND?
JRST TTSND8 ;YES. GO DO ONE
JE TTSAL,(T2),TTSNDA ;NOT SENDALL
SETZRO TSALP,(T2) ;NO. CLEAR SENDALL POINTER
SETZRO TTSAL,(T2) ;INDICATE NO LONGER DOING SENDALL
SOS SALCNT ;DECREMENT COUNT OF SENDALL LINES
TTSNDA: JN <TTSFG,TTSHT>,(T2),[ SETZRO TTOTP,(T2) ;IF CTRL/S TYPED, SET OUTPUT
RET] ; NOT ACTIVE
JRST TTSND7 ;SEE IF THERE ARE CHARACTERS TO SEND
;LINE IS DOING A SENDALL. GET THE NEXT CHARACTER FROM THE SENDALL BUFFER
TTSND8: LOAD T3,TSALP,(T2) ;GET ITS BYTE POINTER
ILDB T1,T3 ;GET NEXT CHARACTER
STOR T3,TSALP,(T2) ;SAVE UPDATED BYTE POINTER
DECR TSALC,(T2) ;DECREMENT COUNT OF REMAINING CHARACTERS
TRNN 1,200 ;THIS CHARACTER HAVE PARITY?
JRST TTSND5 ;NO. GO ON
TDXCT D,VOPAR ;YES. DO PARITY LOGIC THEN ;TCOUT - ADD PARITY TO CHARACTER
TTSND5: EXCH T1,T3 ;GET CHARACTER IN T3
JRST TTSND2 ;GO SEND THE CHARACTER
;NOT A SENDALL
TTSND7: SOSGE TTOCT(2) ;ARE THERE CHARACTERS IN OUTPUT BUFFER?
JRST [ SETZRO TTOTP,(T2) ;NO CHARACTERS. CLEAR OUTPUT-ACTIVE
SETZM TTOCT(T2) ;ZERO COUNTER
CALLRET CLENUP] ; AND GO RELEASE BUFFERS
CALL CHKWRN ;SEE IF WORK WAKEUP NEEDED
;SEND OUTPUT CHARACTER
SKIPN 3,TTOOUT(2) ;GET BUFFER POINTER
BUG(TTONOB)
TDNN 3,WRPMSK ;AT END OF BUFFER?
JRST [ HRRZ 4,3 ;YES GO TO NEXT ONE
HRR 3,1-TTSIZ(4)
MOVEM 3,TTOOUT(2) ;SAVE POINTER
JRST .+1]
ILDB 3,TTOOUT(2) ;GET NEXT CHARACTER
;A 9-BIT FIELD FROM THE OUTPUT BUFFER IS IN T3. SEE IF DATA INDICATES PAGE FULL
;RATHER THAN A CHARACTER TO BE SENT.
TTSND9: TRNE 3,TTOESC ;A FUNCTION ESCAPE CHARACTER?
JRST TTSND3 ;HANDLE ESCAPE SPECIAL
;A REAL CHARACTER WAS FOUND. DO DEVICE-DEPENDENT THINGS TO SEND
;IT TO THE TERMINAL
TTSND2: TDJRST D,VSNDCH ;TTSND -SEND CHARACTER TO LINE
;..
;TTSND..
;FUNCTION ESCAPE CHARACTER ENCOUNTERED IN OUTPUT STREAM
;..
TTSND3: CAIN 3,TTOPFC ;PAGE FULL FUNCTION?
JRST [ SETONE TTSFG,(T2) ;YES. SIMULATE CTRL/S
JRST TTSND6] ; AND GO CLEAR OUTPUT ACTIVE
PUSH P,T2 ;SAVE ADDRESS OF DYNAMIC DATA
DYNST ;GET LINE NUMBER TO PRINT
BUG(TTILEC,<<2,D>,<3,D>>)
POP P,T2 ;RESTORE ADDRESS OF DYNAMIC DATA
JRST TTSND6
;CHKWRN - CHECK FOR WAKEUP NEEDED FROM OUTPUT BLOCK
;CALLED WHEN CHARACTERS TAKEN FROM OUTPUT BUFFER AND TTOCT REDUCED
; T2/ DYNAMIC DATA PTR
CHKWRN: JE TTBKO,(T2),R ;RETURN IMMED IF NO FORK WAITING ON LINE
LOAD T3,TOWRN,(T2) ;GET WARNING LEVEL COUNT
CAMLE T3,TTOCT(T2) ;CAN WAKE?
CALL CHKTOT ;YES, POKE SCHED
RET
;CHKBKO - CHECK FOR WAKEUP NEEDED ON OUTPUT EVENT
; T2/ DYNAMIC DATA PTR
CHKBKO: JE TTBKO,(T2),R ;RETURN IMMED IF NO FORK WAITING ON LINE
CALLRET CHKTOT ;REQUEST CHECK OF OUTPUT-BLOCKED FORKS
;CLENUP - GET RID OF OUTPUT BUFFERS
;ACCEPTS:
; T2/ ADDRESS OF DYNAMIC DATA
; CALL CLENUP
;RETURNS +1: ALWAYS
;OUTPUT BUFFERS ARE EMPTY. RELEASE THEM. IF INTERRUPT
;ON EMPTY OUTPUT BUFFER IS REQUESTED, PUT A WORD IN TTBBUF WITH BIT
;TTOIRQ SET. TTCH7 WILL FIND IT WHEN IT IS RUN AGAIN.
CLENUP: CALL TTRLOB ;RELEASE OUTPUT BUFFERS, SINCE EMPTY
MOVX 3,1B<.TICTO>
OPSTR <SKIPE>,TTMES,(T2) ;A NORMAL BLOCK?
RET
LOAD T1,TTPSFK,(T2) ;GET FORK #
CAIE T1,-1 ;SKIP IF NOT SET
JRST CLENU1 ;SET, NON-CONTROLLING TERMINAL PSI REQUESTED
CLENU2: TDNN 3,TTPSI(2) ;OUTPUT INTERRUPT WANTED?
RET ;NO. RETURN
MOVEI T1,TTOIRQ ;YES, PUT REQUEST IN BIG BUF
JRST CLENU3
CLENU1: LOAD T1,TTOPSI,(T2) ;GET PSI CHANNEL NUMBER
CAIL T1,^D36 ;SETUP?
JRST CLENU2 ;NO TRY OLD WAY
MOVEI T1,TTPIRQ ;SET UP TO DO INTERRUPT
CLENU3: SAVELN
DYNST ;GET LINE NUMBER
HRL T1,T2
CALLRET BIGSTO ;REQUEST INTERRUPT
;ROUTINES CALLED FROM SECONDARY PROTOCOL INTRRUPT ROUTINES
;POST OUTPUT DONE. 2/LINE NUMBER
TTODON::CALL STADYN ;GET ADDRESS OF DYNAMIC DATA
JRST [ JUMPLE T2,R ;RETURN IF BECOMING ACTIVE OR INACTIVE
JE TTMES,(T2),R ;RETURN IF NOT A TTEMES BLOCK
CALLRET TTSND] ;CONTINUE IF TTEMES BLOCK
CALLRET TTSND ;SEND ANOTHER CHARACTER IF ANY
;INPUT DONE AND CHARACTER PRESENT
; T1/ CHARACTER
; T2/ LINE NUMBER
; CALL TTIDON
; RETURN +1 ALWAYS
TTIDON::CAIE T1,PGMOFC+1B28 ;PARITY AND XOFF
CAIN T1,PGMOFC ;CHECK FOR XOFF
JRST TTYSTC ;YES CHECK ON WHAT TO DO
TTICNT::TRO T1,DLSRCF ;INDICATE RECEIVED CHARACTER
HRL T1,T2 ;COMBINE LINE NUMBER WITH CHAR
CALLRET BIGSTO ;PUT IN BUG BUFFER
TTYSTC: PUSH P,T2
CALL STADYN ;GET DYN ADDRESS
JRST TTYNST ;NOT SETUP YET
JE TT%PGM,TTFLGS(T2),TTYNST ;IF NO XOFF, GO AWAY
SETONE TTSFG,(T2) ;YES STOP OUTPUT
ADJSP P,-1 ;JUNK SAVED REGISTERS
TDJRST D,VXOFF ;DO SPECIAL XOFF STUFF ;PROCESS XOFF FROM TERMINAL
TTYNST: POP P,T2 ;RESTORE
JRST TTICNT ;CONTINUE CHARACTER PROCESSING
;TTDALL - ROUTINE CALLED FROM POWER RESTART CODE TO DETACH ALL JOBS
RESCD ;MUST BE RESIDENT
TTDALL::SETZ C, ;START WITH FIRST LINE TYPE
JRST TTDAL5 ;GO CHECK THEM
;GO TO NEXT LINE. IF THE LINE TYPE CHANGES, DON'T PROCEED WITH THE NEW
;LINE. INSTEAD, GO TO THE NEXT LINE TYPE AFTER THE ONE JUST PROCESSED.
;THIS CODE ASSUMES THAT ALL LINES OF A GIVEN TYPE ARE NUMBERED CONSECUTIVELY.
TTDAL3: LOAD C,TTSTY,(B) ;GET CURRENT TYPE
ADDI B,1 ;GO TO NEXT LINE
CAIL B,NLINES ;BEYOND END OF LINES?
JRST TTDAL7 ;YES. GO TO NEXT LINE TYPE
LOAD A,TTSTY,(B) ;GET TYPE OF NEXT LINE
CAME C,A ;NEW TYPE?
JRST TTDAL7 ;YES. GO INCREMENT THE LINE TYPE
;TRANSFER ACCORDING TO THE VECTOR IN A. CERTAIN TYPES ARE NEVER
;PROCESSED.
MOVE A,TTLINV(C) ;GET VECTOR FOR THIS TYPE
JRST @VDET(A) ;GO TO DEVICE DEPENDENT CODE ;DETACH JOB ON THIS LINE
;DETACH THE JOB ON THIS LINE IF THERE IS ONE
TTDAL6: CAME B,CTYLNO ;IS THIS THE CTY?
CALL TTJBDT ;DETACH THE JOB
JRST TTDAL3 ;GO PROCESS NEXT LINE
;FINISHED THE CURRENT LINE TYPE OR THE CURRENT TYPE IS NOT TO BE PROCESSED
;GO TO THE NEXT TYPE AND SEE IF IT IS TO BE PROCESSED
TTDAL7: AOS C ;GO TO NEXT LINE TYPE
CAIL C,NLTYPS ;BEYOND END OF LEGAL TYPES?
RET ;YES. DONE ALL LINES
TTDAL5: MOVE A,TTLINV(C) ;GET VECTOR FOR THIS TYPE
MOVE B,TT1LIN(A) ;GET FIRST LINE OF THIS TYPE
;TRANSFER ACCORDING TO THE VECTOR IN A. CERTAIN TYPES ARE NEVER
;PROCESSED.
JRST @VDET(A) ;GO TO DEVICE DEPENDENT CODE ;DETACH JOB ON THIS LINE
;ROUTINES TO ENABLE/DISABEL DATASETS.
;CLOBBERS ALL TEMP REGISTERS:
DTRMEN::TDZA D,D ;GET A ZERO TO DO ENABLE
DTRMDS::MOVEI D,1 ;GET A ONE TO DISABLE
PUSH P,Q1 ;DO ALL LINE TYPES
PUSH P,Q2
MOVEI Q1,NLTYPS ;DO ALL LINE TYPES
TTLIL2: MOVE Q2,TTLINV-1(Q1) ;GET VECTOR
CALL @TSETDS(Q2) ;GO DO DEVICE DEPENDENT ENABLE/DISABLE ;ENABLE/DISABLE DATASETS
SOJG Q1,TTLIL2
POP P,Q2
POP P,Q1 ;RESTORE
RET
;DUMMY TRANSFER VECTOR. USED FOR LINE TYPES FOR WHICH THE CURRENT
;MONITOR HAS NO LINES
RESCD
TTFEVT=.
TTDZVT=.
TTDCVT=.
TTMCVT=.
TTNTVT=.
TTPTVT=.
TTDMVT: TTDDLN ;DDLEN - LENGTH OF DYNAMIC DATA FOR THIS TYPE
-1 ;TT1LIN - (FIRST LINE,,NUMBER OF LINES)
IFIW!R ;VITBLS - INITIALIZE TABLES AT SYSTEM STARTUP ;INITIALIZE TABLES AT SYSTEM STARTUP
IFIW!R ;VACTLN - ACTIVATE LINES AT STARTUP OR RESTART ;ACTIVATE LINES AT STARTUP OR RESTART
IFIW!TTBUGH ;VCLOBF - CLEAR OUTPUT BUFFER ;CLEAR OUTPUT BUFFER
IFIW!TTBUGH ;VSETSP - SET LINE SPEED ;SET LINE SPEED
IFIW!TTBUGH ;VGETSP - READ LINE SPEED ;READ LINE SPEED
IFIW!TTBUGH ;VSETTS - SET TERMINAL/NON-TERMINAL STATUS ;SET TERMINAL/NON-TERMINAL STATUS
IFIW!TTBUGH ;VGETTS - READ TERMINAL/NON-TERMINAL STATUS ;READ TERMINAL/NON-TERMINAL STATUS
IFIW!TTBUGH ;VSTO - STO JSYS ;STO JSYS
IFIW!TTBUGH ;VSTPAR - STPAR JSYS ;STPAR JSYS
IFIW!TTBUGH ;VCKPHY - CKPHYT - SEE IF PHYSICAL TERMINAL ;CKPHYT - SEE IF PHYSICAL TERMINAL
IFIW!TTBUGH ;VXON - RESUME OUTPUT TO TERMIAL ;PROCESS XON FROM TERMINAL
IFIW!TTBUGH ;VDETDB - NOT USED ;DEASIGN TTY DATA BASE
JRST TTBUGH ;VOPAR - TCOUT - ADD PARITY TO CHARACTER ;TCOUT - ADD PARITY TO CHARACTER
IFIW!TTBUGH ;VSTOUT - START OUTPUT TO LINE ;START OUTPUT TO LINE
IFIW!TTBUGH ;VSXOFF - SEND XOFF TO TERMINAL ;SEND XOFF TO TERMINAL
IFIW!TTBUGH ;VSXON - SEND XON TO TERMINAL ;SEND XON TO TERMINAL
IFIW!TTCQ6 ;VTTCS - TTCH7 - PROCESS TTCS WORDS ;TTCH7 - PROCESS TTCS WORDS
IFIW!TTBUGH ;VCON - HANDLE CARRIER/ON ;HANDLE CARRIER/ON
IFIW!TTBUGH ;VCOFF - HANDLE CARRIER OFF ;HANDLE CARRIER/OFF
IFIW!TTBUGH ;VHNGUP - HANGUP,REACTIVATE REMOTE LINE ;HANGUP, REACTIVATE REMOTE LINE
IFIW!TTBUGH ;VXOFF - PROCESS XOFF FROM TERMINAL ;PROCESS XOFF FROM TERMINAL
IFIW!TTBUGH ;RNEWCC - HANDLE CTRL/C FROM INACTIVE LINE ;HANDLE CTRL/C FROM INACTIVE LINE
IFIW!TTBUGH ;VSTOBB - BIGSTO - STORE CHARACTER IN TTBBUF ;BIGSTO - STORE CHARACTER IN TTBBUF
IFIW!TTBUGH ;VSNDCH - TTSND - SEND CHARACTER TO LINE ;TTSND -SEND CHARACTER TO LINE
IFIW!TTDAL7 ;VDET - DETACH JOB ON THIS LINE ;DETACH JOB ON THIS LINE
IFIW!TTBUGH ;VBBOV - HANDLE OVERFLOW OF TTBBUF ;HANDLE OVERFLOW OF TTBBUF
IFIW!TTBUGH ;VGCHBB - REMOVE CHARACTER FROM TTBBUF ;REMOVE CHARACTER FROM TTBBUF
IFIW!TTBUGH ;VTTMSG - DO TTMSG FOR ONE LINE? ;DO TTMSG FOR ONE LINE?
IFIW!R ;TSETDS - ENABLE/DISABLE DATASETS ;ENABLE/DISABLE DATASETS
IFIW!R ;VCKLIN - TTCH7 AFTER EMPTYING TTBBUF ;TTCH7 AFTER EMPTYING TTBBUF
IFIW!TTBUGH ;VCLIBF - CLEAR INPUT BUFFER ;CLEAR INPUT BUFFER
IFIW!TTBUGH ;VDOBE - DOBE ;DOBE
IFIW!TTBUGH ;VHNGRY - INPUT GA ;INPUT GA
IFIW!TTBUGH ;VSINIV - SET INITIAL VALUES FOR A LINE ;SET INIT. VALUES FOR A LINE
IFIW!TTBUGH ;VSOBE - SOBE ;SOBE
IFIW!TTBUGH ;VDOBET - WAKEUP IF OUTPUT BUFFER EMPTY ;WAKEUP IF OUTPUT BUFFER EMPTY
IFIW!TTBUGH ;VSNDA1 - SENDAL FOR ONE LINE ;SENDALL FOR ONE LINE
IFIW!TTMSDM ;VSNDAL - SENDALL FOR ALL LINES ;SENDALL FOR ALL LINES
JRST TTBUGH ;VAJWCL - ADJUST WAKEUP CLASSES ;ADJUST WAKEUP CLASS
;VSNDAL - INDICATE THERE ARE NO LINES OF THIS TYPE FOR TTMSG ;SENDALL FOR ALL LINES
TTMSDM: SETOM B ;INDICATE SKIP ENTIRE LINE GROUP
RETSKP
TTBUGH: BUG(BADTTY)