Trailing-Edge
-
PDP-10 Archives
-
bb-h138f-bm
-
7-sources/chmchkcc.bli
There are 11 other files named chmchkcc.bli in the archive. Click here to see a list.
%TITLE 'CHMCHKCC - check for control C'
MODULE CHMCHKCC ( ! Check for control C
IDENT = '3-005' ! File: CHMCHKCC.BLI Edit: CJG3005
) =
BEGIN
!COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1981, 1988. ALL RIGHTS RESERVED.
!
!THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED ONLY
!IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE INCLUSION OF
!THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER COPIES THEREOF MAY
!NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE
!TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
!
!THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE AND
!SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT CORPORATION.
!
!DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
!SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
!
!++
! FACILITY: EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
! This module checks to see if a CTRL/C has been typed.
!
! ENVIRONMENT: Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: Unknown
!
! MODIFIED BY:
!
! 1-001 - Original. DJS 04-Feb-1981. This module was created by
! extracting routine EDT$$CHK_CC from module CHANGE.BLI.
! 1-002 - Regularize headers and remove control C checking, since we intend to
! re-do it to support journaling. JBS 27-Feb-1981
! 1-003 - Fix module name. JBS 02-Mar-1981
! 1-004 - Revise journaling to support control C. JBS 22-Jun-1981
! 1-005 - Add logic for recovering during control C. JBS 18-Dec-1981
! 1-006 - Debug control C journaling. JBS 24-Dec-1981
! 1-007 - Change names of control C data. JBS 29-Dec-1981
! 1-008 - Use two words for control C counters. JBS 30-Dec-1981
! 1-009 - Print the 'working' message from this routine. JBS 13-Jan-1982
! 1-010 - Use symbols instead of magic numbers for control C journaling. JBS 24-May-1982
! 1-011 - Change the format of the working message. SMB 28-Jun-1982
! 1-012 - Figure out whether the journal buffer should be flushed. STS 28-Sep-1982
! 1-013 - Don't destroy the cursor position, it is now being maintained accurately. JBS 07-Oct-1982
! 1-014 - Clear EDT$$G_SECOND after printing or erasing the working message, so
! we do not spend all our time printing the working message on slow terminals. JBS 07-Oct-1982
! 3-001 - Add updates from V3 sources. GB 26-Apr-1983
! 3-002 - Fix working message for TOPS-20 operation. CJG 15-Jun-1983
! 3-003 - Modify Control-C code slightly. CJG 17-Jun-1983
! 3-004 - Simplify the timer again. CJG 24-Nov-1983
! 3-005 - Modify ASSERT macro to include error code. CJG 30-Jan-1984
!--
%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!
REQUIRE 'EDTSRC:TRAROUNAM';
FORWARD ROUTINE
EDT$$CHK_CC; ! Check to see if a CTRL/C has been typed
!
! INCLUDE FILES:
!
REQUIRE 'SYS:JSYS';
REQUIRE 'EDTSRC:EDTREQ';
!
! MACROS:
!
! NONE
!
! EQUATED SYMBOLS:
!
LITERAL
JOU_MAX = 20,
WORK_COL = 26;
!
! OWN STORAGE:
!
! NONE
!
! EXTERNAL REFERENCES:
!
! In the routine
%SBTTL 'EDT$$CHK_CC - check for control C'
GLOBAL ROUTINE EDT$$CHK_CC ! Check for control C
=
!++
! FUNCTIONAL DESCRIPTION:
!
! This routine checks to see if a CTRL/C has been typed.
! It is called frequently enough that the response to typing a control C
! is reasonably fast. It keeps track of how often it has been called
! since the last journal record was written so it can do the same during
! recovery.
!
! This routine is also responsible for printing the 'working' message.
! The flag SECOND is set once a second by an AST. If it is set
! this routine clears it and either prints or erases the 'working' message.
!
! FORMAL PARAMETERS:
!
! NONE
!
!IMPLICIT INPUTS:
!
! FMT_WRRUT
! MESSAGE_LINE
! RCOV_MOD
! CC
! CC_CNT1
! CC_CNT2
! CC_FLAG
! SECOND
! WORKCOUNT
!
! IMPLICIT OUTPUTS:
!
! CC_CNT1
! CC_CNT2
! CC_FLAG
! SECOND
! WORKCOUNT
!
! ROUTINE VALUE:
!
! 0 no control C typed
! 1 control C was typed
!
! SIDE EFFECTS:
!
! May print or erase the 'working' message.
!
!--
BEGIN
EXTERNAL
PUT_JOU, ! Flag to put journal buffer
TIN_OBUFPOS, !
FMT_WRRUT, ! Address of output formatter
MESSAGE_LINE, ! Working on this line + 1
CC : VOLATILE, ! 1 = a control C has been typed
CC_CNT1, ! Counts number of "no control C's" returned.
CC_CNT2, ! Loaded with value from control C record
CC_FLAG, ! 1 = a control C record was read or written
RCOV_MOD, ! 1 = /RECOVER
SECOND : VOLATILE, ! Set once a second
WORKCOUNT; ! Counter to support the 'working' message
EXTERNAL ROUTINE
EDT$$TI_WRSTR, ! String format for working
EDT$$OUT_FMTBUF, ! Output format buffer to terminal
EDT$$SC_ERATOEOL, ! Erase to end of current line
EDT$$SC_POSCSIF, ! Absolute cursor positioning
EDT$$SC_REVID : NOVALUE, ! Set screen to reverse video
EDT$$MSG_TOSTR, ! Write out the working message
EDT$$TI_FLUSHJOUFI : NOVALUE; ! Write a record on the journal file
LOCAL
FORMAT_ROUTINE; ! Save the format routine entered with
MESSAGES ((WORKING));
!+
! If a second has passed since we were last here, print or erase the
! 'working' message.
!-
IF ((.WORKCOUNT GEQ 0) AND (.SECOND NEQ 0))
THEN
BEGIN
WORKCOUNT = .WORKCOUNT + 1;
FORMAT_ROUTINE = .FMT_WRRUT;
FMT_WRRUT = EDT$$TI_WRSTR;
EDT$$SC_POSCSIF (.MESSAGE_LINE + 1, WORK_COL);
EDT$$SC_REVID ();
IF .WORKCOUNT THEN EDT$$MSG_TOSTR (EDT$_WORKING) ELSE EDT$$SC_ERATOEOL ();
EDT$$OUT_FMTBUF ();
FMT_WRRUT = .FORMAT_ROUTINE;
SECOND = 0;
END;
!+
! If we are in recovery mode, use the counters to
! simulate typing a control C at the right point.
!-
IF .RCOV_MOD
THEN
BEGIN
!+
! If CC_FLAG is zero, there has been no control C record.
!-
IF (.CC_FLAG EQL 0) THEN RETURN (0);
!+
! If the counters match, it is time to return a control C.
!-
IF (.CC_CNT1 EQL .CC_CNT2)
THEN
BEGIN
PUT_JOU = 1;
RETURN (1);
END;
!+
! Otherwise, we are one count closer to a control C.
!-
CC_CNT1 = .CC_CNT1 + 1;
ASSERT (4, .CC_CNT1 LEQ CC_CTR_MAX);
RETURN (0);
END
ELSE
BEGIN
!+
! We are not recovering.
!-
IF (.CC NEQ 0)
THEN
BEGIN
!+
! A control C was typed. Write out a control C record in case
! we must recover to this point, unless we have already written it.
!-
PUT_JOU = 1;
IF (.CC_FLAG EQL 0)
THEN
BEGIN
EDT$$TI_FLUSHJOUFI (%C'C');
CC_FLAG = 1;
END;
RETURN (1);
END;
!+
! Keep track of the number of times we are called but no control C has
! been typed; that is, count the number of times we return 0. This
! number will be written to the journal file later, when and if we see a
! control C, so that we can read it into the second counter on recovery,
! and thus return 1 at the same point in EDT's execution.
!-
CC_CNT1 = .CC_CNT1 + 1;
ASSERT (4, .CC_CNT1 LEQ CC_CTR_MAX);
!+
! check to see if the journal buffer should be written out and
! the control-c counter restarted
!-
IF (.TIN_OBUFPOS GEQ JOU_MAX) THEN PUT_JOU = 1;
RETURN (0);
END;
END;
END
ELUDOM