Trailing-Edge
-
PDP-10 Archives
-
k20v7d
-
utilities/copyfe.mac
There is 1 other file named copyfe.mac in the archive. Click here to see a list.
SALL
TITLE COPYFE
SEARCH MONSYM,MACSYM
.REQUIRE SYS:MACREL
;
; THIS PROGRAM TRIES TO RESTORE A FRONT-END SYSTEM IN PLACE
;
; IT NEEDS A FILE , WRITTEN BY 'FEREAD' , WHICH HOLDS:
; PAGE 0 == COPIES OF ORIGINAL BLOCKS 0 TO 4
; BLOCK 0 BEING USED AS THE BOOTS-BLOCK
; PAGE 1 == LENGTH-WORD OF FDB OF ORIGINAL FE-FILE
; PAGE 2 == COPY OF FIRST INDEX-BLOCK OF ORIGINAL FILE
; USED TO CHECK BEGINNING LOCATION
;
; THE FILE TO BE COPIED IS READ PAGE BY PAGE VIA DSKOP'S
; USING ADRESSES OBTAINED FROM SUPER-INDEX-BLOCK ,WHICH
; IN TURN POINT TO INDEX-BLOCKS , AND THEIR ENTRIES POINT
; TO THE 'REAL' PAGES.
;
; THE FILE IS READ WITHOUT ERROR-RECOVERY , TO BE ABLE TO
; DETECT HARD- OR SOFT-ERRORS. IN CASE OF HARD ERRORS , THE
; COPYING PROCESS IS ABOLISHED.
;
; THE SO FILLED PAGES ARE DSKOPED INTO THE FE-FILE INTO
; SUCCESSIVE PAGES UNDER THE ASSUMPTION THAT THIS FILE
; IS CONTIGUOUS.
;
; IN CASE OF NO HARD-ERRORS THE BOOT-BLOCK IS COPIED AS
; THE LAST OPERATION.
;
; FLOW AND GENERAL HINTS:
;
; STARTING POINT IS 'START' WHICH ASKS FOR STRUCTURE-FILE
; OF ORIGINAL FE-SYSTEM AND BUILDS PARAMETERS FOR DSKOP.
; HERE WE ALSO LOOK FOR THE 'OTHER' FILE 'FRONT-END-BOOT.BIN'
; WHICH IS EXPECTED IN THE LOGGED-IN AREA.
;
; LABEL CHECK1: COMPARES LENGTH OF ORIGINAL AND 'EMPTY' FILE
; LABEL DOPT: ROLLS SUCCESSIVE INDEX-BLOCKS INTO IDXPAG
; LABEL DOPAG: ROLLS IN SUCCESSIVE DATA-PAGES INTO DATPAG
; LABEL BOOT: WRITES THE BOOT-BLOCK
; SETUP: SUB FOR DSKOP
; LABEL DSKOUT: WRITES TIMES-PAGES OUT TO FE-FILE
; TIMES CLUSTER-COUNT FOR MAPPING
;
A==1 ;JSYS-AC'S
B==2
C==3
D==4 ;3 WORDS OUT OF FDB
W==5
W1==6
W2==7 ;STR-DESIGNATOR FOR DSKOP
PTT==10 ;HOLDS AOBJN POINTER INTO SUPER-INDEX-BLOCK
PT==11 ;HOLDS AOBJN POINTER INTO INDEX-BLOCK
JFN==12 ;WHERE TO SAVE THE JFN
JFN0==13 ;HERE TO SAVE JFN OF COPY-FILE
COUNT==14 ;READ/WRITE AOBJN COUNTER
MAPCNT==15 ;PMAP COUNTER
DSKCNT==16 ;COUNTER FOR SUCCESSIVE DSKOP-WRITES
P==17 ;PDL
PDL: BLOCK 10
FDBNEW: BLOCK 3 ;FOR COMPARISON
CORDAT: BLOCK 1 ;DSKOP-WRITE CORE-ADRESS
DSKADR: BLOCK 1 ;DSK-ADRESS TO WRITE INTO (CONTIGUOUS)
LSTDSK: BLOCK 1 ;LAST DISK ADRESS FOR DSKOP
ERRTYP: BLOCK 1 ;LAST ERROR INDICATION FROM DSKOP
HRDERR: BLOCK 1 ;HARD ERROR INDICATOR
BUFFER: BLOCK 11 ;STR-NAME FOR ORIGINAL FILE
BUFF1: BLOCK 11 ;STR-NAME FOR COPY-DISK
BOOTPG==10000 ;3 PAGES OF 'FRONT-END-BOOT.BIN'
BOOTNR==BOOTPG/PAGLEN
ORGPTR==13000 ;FOR COMPARISON
IDXPAG==14000 ;PAGE OF SUPER-INDEX-BLOCK
PTPAGE==15000 ;PAGE FOR INDEX-BLOCK
DATPAG==16000 ;WHERE FILE DATA GOES
PAGNR==DATPAG/PAGLEN ;THE PAGE-NR
PAGLEN==1000
TIMES==^D5 ;THE REPEAT COUNT FOR DSKOP'S
RELOC 1000-140
FILOUT: TXNN JFN,GJ%DEV!GJ%DIR!GJ%NAM!GJ%EXT!GJ%VER
RET ;NO. DON'T DO NAME THEN
MOVEI A,.PRIOU
MOVEI B,0(JFN)
SETZ C, ;OUTPUT THE NAME
JFNS ;DO IT
HRROI A,[ASCIZ /
/]
PSOUT
RET
; SUBROUTINE TO DSKOP PAGES TO FE-FILE
DSKOUT:MOVEI A,DATPAG-PAGLEN ;RESET CORE ADRESS
MOVEM A,CORDAT ;AND STORE
MOVSI DSKCNT,-TIMES ; X-TIMES OVER
DSKLOP:MOVE A,DSKADR ;ADRESS TO WRITE INTO
ADDI A,4 ;(CONTIGUOUS)!!
MOVEM A,DSKADR ;
MOVEI B,.DOPSR ;STR-RELATIVE ADRESSING
STOR B,DOP%AT,A ;STORE IT
SETONE DOP%SN,A ;DEVICE DESIGNATOR IN D
MOVX B,DOP%WR!1000B35 ;WRITE ONE PAGE
MOVE D,DESIG ;STRUCTURE
MOVE C,CORDAT ;FROM WHERE
ADDI C,PAGLEN ;OUT OF OUR CORE
MOVEM C,CORDAT ;FOR NEXT GO-AROUND
DSKOP ;DO IT
AOBJN DSKCNT,DSKLOP ; X-TIMES OVER
RET
; SUBROUTINE FOR DSKOP OUT OF ORIGINAL FILE
; A == DISK-ADRESS
; C == TARGET (MEMORY) ADRESS
; W2 == STRUCTURE NUMBER
SETUP: MOVEM A,LSTDSK ;SAVE DISK ADDRESS
MOVEI B,.DOPSR ;STR RELATIVE ADDRESSING
STOR B,DOP%AT,A ;STORE IT
SETONE DOP%SN,A ;SAY DEVICE DESIGNATOR IN D
MOVEI B,PAGLEN
TXO B,DOP%IR ;INHIBIT ERROR RECOVERY
MOVE D,W2 ;DEVICE DESIGNATOR
SETZM ERRTYP ;ASSUME NO ERROR
DSKOP ;DO IT
JUMPN A,[ MOVE A,LSTDSK ;GET LAST DISK ADDRESS AGAIN
SETONE DOP%SN,A
MOVEI W,.DOPSR
STOR W,DOP%AT,A ;SET UP NEW ARGS
TXZ B,DOP%IR ;ALLOW ERROR RECOVERY THIS TIME
DSKOP ;TRY IT AGAIN
MOVEM A,ERRTYP ;REMEMBER THE ERROR
RET] ;RETURN WITH CODE IN A
RETSKP ;NO
PRTDSC: HRROI A,[ASCIZ / DISK ADDRESS /]
PSOUT
MOVEI A,.PRIOU
MOVE B,LSTDSK
MOVEI C,10
NOUT
JFCL
HRROI A,[ASCIZ /
/]
PSOUT
RET
START: RESET ;GET A CLEAN SLATE
SETZB MAPCNT,COUNTM
SETZM HRDERR
MOVE P,[IOWD 10,PDL]
HRROI A,[ASCIZ /
COPY AND VERIFY (FROM) : /]
PSOUT
MOVX A,GJ%OLD!GJ%FNS!GJ%SHT!GJ%CFM!GJ%IFG
MOVE B,[.PRIIN,,.PRIOU]
GTJFN ;GET THE FILE
JRST [ JSERR
JRST START]
MOVE JFN,A ;SAVE SOURCE JFN
FILLOP: CALL FILOUT ;PRINT NAME IF APPROPRIATE
START2: HRROI A,[ASCIZ /
(TO) FILE : /]
PSOUT
MOVX A,GJ%OLD!GJ%FNS!GJ%SHT!GJ%CFM!GJ%IFG
MOVE B,[.PRIIN,,.PRIOU]
GTJFN
JRST [JSERR
JRST START2]
MOVE JFN0,A ;SAVE DEST-JFN
MOVE B,A ;MOVE JFN
HRROI A,BUFF1 ;WHERE STR-NAME GOES
MOVX C,1B2 ;DEVICE NAME ONLY
JFNS
HRROI A,BUFF1 ;GET STR-NAME
STDEV ;DEST-FILE
JRST [JSERR
JRST START]
MOVEM B,DESIG# ;SAVE DESIGNATOR DEST-FILE
MOVEI A,0(JFN0)
MOVX B,^D36B5!OF%WR!OF%RD
OPENF ;OPEN DEST FILE
JRST [JSERR
JRST START2]
MOVEI A,0(JFN) ;GET THE JFN
MOVE B,[3,,.FBCTL] ;READ 3 FDB WORDS
MOVEI C,D ;INTO THE REGS
GTFDB ;FROM SOURCE-FILE
;GET STRUCTURE NAME FOR DSKOP
MOVE B,A ;MOVE THE JFN
HRROI A,BUFFER ;WHERE TO PUT STRUCTURE NAME
MOVX C,1B2 ;DEVICE NAME ONLY
JFNS ;DO IT
HRROI A,BUFFER ;GET STR NAME
STDEV ;GET DEVICE DESIGNATOR SOURCE FILE
JRST [ JSERR
JRST START] ;
MOVE W2,B ;SAVE DESIGNATOR SOURCE FILE
MOVX A,GJ%OLD!GJ%SHT
HRROI B,[ASCIZ /DSK:FRONT-END-BOOT.BIN
/]
GTJFN
JRST [ JSERR
JRST START]
MOVEM A,INJFN# ;SAVE JFN COMPARE JFN
MOVX B,^D36B5!OF%RD
OPENF
JRST [ JSERR
JRST START]
HRLZ A,INJFN
HRLZI B,.FHSLF
HRRI B,BOOTNR
MOVX C,PM%CNT!PM%RD!3B35
PMAP
MOVEI A,0(JFN0)
MOVE B,[1,,.FBBYV]
MOVEI C,FDBNEW
GTFDB
MOVE A,FDBNEW ;GET LENGTH DEST-FILE
TLZ A,777777
HRRZ B,BOOTPG+PAGLEN
CHECK1: CAMGE A,B ;COMPARE LENGTH OF BOTH FILES
JRST[HRROI A,[ ASCIZ /
? FRONT-END-FILE-SYSTEM.BIN OF DIFFERENT LENGTH,
CANNOT RESTORE
/]
PSOUT
JRST DONE1]
MOVEI A,0(JFN0)
MOVE B,[3,,.FBCTL]
MOVEI C,FDBNEW
GTFDB
TXNN D,FB%LNG ;IS SOURCE A LONG FILE?
JRST [ MOVEM W1,IDXPAG ;NO. SAVE ONLY XB ADDRESS
MOVSI PTT,-1 ;ONLY LOOK AT ONE ENTRY
JRST DOPT0] ;AND GO PROCESS THE PTT
MOVE A,W1 ;GET DISK ADDRESS
MOVEI C,IDXPAG ;WHERE ITS GOING
CALL SETUP ;GO SET UP ARGS AND DO OPERATION
JRST [ HRROI A,[ASCIZ /
?HARD ERROR READING SUPER-INDEX-POINTER/]
SKIPN ERRTYP ;WAS IT REALLY HARD?
HRROI A,[ASCIZ /
%RECOVERABLE ERROR READING SUPER-INDEX-POINTER/]
PSOUT
SKIPE ERRTYP
SETOM HRDERR ;MARK HARD ERROR
CALL PRTDSC
SKIPN ERRTYP ;HARD ERROR
JRST .+1 ;NO. GO ON
JRST START]
MOVSI PTT,-PAGLEN ;DO ALL PTT'S
DOPT0: MOVEI COUNT,DATPAG-PAGLEN
MOVEM COUNT,DATA# ;SETUP ORIGINAL DSKOP-POINTER
MOVSI COUNT,-TIMES ;AND AOBJN POINTER
DOPT: MOVSI PT,-PAGLEN ;DO ALL OF THIS PT
SKIPN A,IDXPAG(PTT) ;GET PAGE TABLE ADDRESS
JRST DOPT1 ;NONE HERE.
TLZ A,777000 ;IGNORE CHECKSUM
JUMPE A,DOPT1 ;SKIP IT IF NOTHING HERE
MOVEI C,PTPAGE ;WHERE TO PUT IT
CALL SETUP ;GET IT
JRST [ HRROI A,[ASCIZ /
?HARD ERROR READING INDEX-BLOCK # /]
SKIPN ERRTYP ;WAS IT REALLY HARD?
HRROI A,[ASCIZ /
%RECOVERABLE ERROR READING INDEX-BLOCK # /]
PSOUT
SKIPE ERRTYP
SETOM HRDERR ;MARK HARD ERROR
MOVEI B,0(PTT)
MOVEI A,.PRIOU
MOVEI C,10
NOUT
JFCL
CALL PRTDSC
SKIPN ERRTYP ;RECOVERABLE?
JRST .+1 ;YES. PROCEED
JRST DOPT1]
DOPAG: SKIPN A,PTPAGE(PT) ;DO NEXT DATA PAGE
JRST DOP3 ;NONE HERE
TLZ A,777000 ;IGNORE CHECKSUM
JUMPE A,DOP3 ;IF NOW ZERO, IGNORE IT
MOVE C,DATA
ADDI C,PAGLEN
MOVEM C,DATA ;BUMP DSKOP POINTER
MOVEM COUNT,COUNTM ;SAVE READ-POINTER
CALL SETUP ;DO IT
JRST [ HRROI A,[ASCIZ /
?HARD ERROR READING PAGE # /]
SKIPN ERRTYP ;REALLY HARD?
HRROI A,[ASCIZ /
%RECOVERABLE ERROR READING PAGE # /]
PSOUT
SKIPE ERRTYP
SETOM HRDERR ;MARK HARD ERROR
MOVEI A,.PRIOU
MOVEI B,0(PT)
MOVEI C,10
NOUT
JFCL
HRROI A,[ASCIZ / OF INDEX-BLOCK # /]
PSOUT
MOVEI A,.PRIOU
MOVEI B,0(PTT)
NOUT
JFCL
CALL PRTDSC
PSOUT
JRST DOP2] ;DO NEXT
DOP2: AOBJN COUNT,DOP3 ;GET PAGES VIA DSKOP
MOVEM COUNT,COUNTM# ;SAVE COUNT FOR POSTERITY
CALL DSKOUT ;WRITE BUNCH OF PAGES OUT
MOVEI COUNT,DATPAG-PAGLEN
MOVEM COUNT,DATA ;RESTORE ORIGINAL DSKOP-POINTER
MOVSI COUNT,-TIMES
SETZM COUNTM
DOP3: TRNE PTT,-1 ;FIRST SUPER-INDEX POINTER ?
JRST DOP4 ;NOPE
TRNE PT,-1 ;AND FIRST INDEX-POINTER ?
JRST DOP4 ;NOPE
MOVE D,FDBNEW ;IS DEST-FILE LONG ??
TXNN D,FB%LNG
JRST [HRROI A,[ASCIZ /
? DESTINATION FILE NOT A LONG FILE ????
/]
PSOUT
JRST DONE1] ;GIVE UP ,THIS IS FISHY !!
PUSH P,W2 ;SAVE W2
MOVE W2,DESIG
MOVEI C,ORGPTR ;WHERE WE WANT TO READ TO
MOVE A,FDBNEW+2 ;READ SUPER-INDEX BLOCK
CALL SETUP
JFCL ;FOR THE TIME BEING
MOVEI C,ORGPTR
MOVE A,ORGPTR
CALL SETUP ;AND FIRST INDEX-BLOCK
JFCL ;FOR THE TIME BEING
POP P,W2
MOVE A,ORGPTR ;GET FIRST PAGE-ADRESS FOR COMPARISON
CHECK2: CAME A,BOOTPG+PAGLEN+PAGLEN
JRST [HRROI A,[ ASCIZ /
? FRONT-END-FILE-SYSTEM.BIN DOES NOT START
AT SAME ADRESS AS ORIGINAL , CANNOT RESTORE
/]
PSOUT
JRST DONE1]
TLZ A,777000 ;GET RID OF CHECKSUM
SUBI A,4 ;
MOVEM A,DSKADR ;AND STORE FOR DSKOUT
; THESE ARE THE LOOPS OVER SUPER-INDEX AND INDEX-BLOCKS !!
;
DOP4: AOBJN PT,DOPAG ;DO ALL OF THIS INDEX-POINTER
DOPT1: AOBJN PTT,DOPT ;DO NEXT INDEX-BLOCK
MOVEI A,DATPAG-PAGLEN ;BUILD CORE-ADRESS
MOVEM A,CORDAT ;AND STORE
MOVN DSKCNT,COUNTM ;BUILD REPITITION COUNT
HRLZS DSKCNT
CALL DSKLOP ;GET FINAL BUNCH OUT
DONE: SKIPE HRDERR
JRST [HRROI A,[ASCIZ /
?COPYING PROCESS UNSUCCESSFUL , HARD ERROR!!
DELETE ORIGINAL AND GET IT BACK WITH DUMPER !!
? BOOTS NOT WRITTEN ,CORRECT PROBLEMS FIST !
/]
PSOUT
JRST DONE1]
HRLZI A,10 ;BLOCK 0 GETS BOOTS
MOVEI B,.DOPSR ;STRUCTURE RELATIVE ADRESSING
STOR B,DOP%AT,A ;STORE IT
SETONE DOP%SN,A ;SAY DEVICE DESIGNATOR IN D
MOVX B,DOP%WR!200B35 ;ONE BLOCK ONLY,WRITE
MOVE D, DESIG ;DEVICE DESIGNATOR
MOVEI C,BOOTPG ;FROM BOOT-PAGE
BOOT: DSKOP
JFCL
HRROI A,[ASCIZ /
BOOT WRITTEN
/]
PSOUT
HRROI A,[ASCIZ /
DONE!
/]
PSOUT
DONE1: SETO A,
HRLI B,.FHSLF
HRRI B,BOOTNR
MOVX C,PM%CNT!3B35
PMAP ;UNMAP OUR BOOT-FILE
SETO A,
CLOSF
JRST [JSERR
JRST START]
HALTF
JRST START ;START OVER IF CONTINUED
END START